diff options
Diffstat (limited to 'drivers/gpu/drm/i915/dvo_ivch.c')
| -rw-r--r-- | drivers/gpu/drm/i915/dvo_ivch.c | 442 |
1 files changed, 442 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/dvo_ivch.c b/drivers/gpu/drm/i915/dvo_ivch.c new file mode 100644 index 00000000000..0c8d375e8e3 --- /dev/null +++ b/drivers/gpu/drm/i915/dvo_ivch.c @@ -0,0 +1,442 @@ +/* + * Copyright © 2006 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * + */ + +#include "dvo.h" + +/* + * register definitions for the i82807aa. + * + * Documentation on this chipset can be found in datasheet #29069001 at + * intel.com. + */ + +/* + * VCH Revision & GMBus Base Addr + */ +#define VR00 0x00 +# define VR00_BASE_ADDRESS_MASK 0x007f + +/* + * Functionality Enable + */ +#define VR01 0x01 + +/* + * Enable the panel fitter + */ +# define VR01_PANEL_FIT_ENABLE (1 << 3) +/* + * Enables the LCD display. + * + * This must not be set while VR01_DVO_BYPASS_ENABLE is set. + */ +# define VR01_LCD_ENABLE (1 << 2) +/** Enables the DVO repeater. */ +# define VR01_DVO_BYPASS_ENABLE (1 << 1) +/** Enables the DVO clock */ +# define VR01_DVO_ENABLE (1 << 0) + +/* + * LCD Interface Format + */ +#define VR10 0x10 +/** Enables LVDS output instead of CMOS */ +# define VR10_LVDS_ENABLE (1 << 4) +/** Enables 18-bit LVDS output. */ +# define VR10_INTERFACE_1X18 (0 << 2) +/** Enables 24-bit LVDS or CMOS output */ +# define VR10_INTERFACE_1X24 (1 << 2) +/** Enables 2x18-bit LVDS or CMOS output. */ +# define VR10_INTERFACE_2X18 (2 << 2) +/** Enables 2x24-bit LVDS output */ +# define VR10_INTERFACE_2X24 (3 << 2) + +/* + * VR20 LCD Horizontal Display Size + */ +#define VR20 0x20 + +/* + * LCD Vertical Display Size + */ +#define VR21 0x20 + +/* + * Panel power down status + */ +#define VR30 0x30 +/** Read only bit indicating that the panel is not in a safe poweroff state. */ +# define VR30_PANEL_ON (1 << 15) + +#define VR40 0x40 +# define VR40_STALL_ENABLE (1 << 13) +# define VR40_VERTICAL_INTERP_ENABLE (1 << 12) +# define VR40_ENHANCED_PANEL_FITTING (1 << 11) +# define VR40_HORIZONTAL_INTERP_ENABLE (1 << 10) +# define VR40_AUTO_RATIO_ENABLE (1 << 9) +# define VR40_CLOCK_GATING_ENABLE (1 << 8) + +/* + * Panel Fitting Vertical Ratio + * (((image_height - 1) << 16) / ((panel_height - 1))) >> 2 + */ +#define VR41 0x41 + +/* + * Panel Fitting Horizontal Ratio + * (((image_width - 1) << 16) / ((panel_width - 1))) >> 2 + */ +#define VR42 0x42 + +/* + * Horizontal Image Size + */ +#define VR43 0x43 + +/* VR80 GPIO 0 + */ +#define VR80 0x80 +#define VR81 0x81 +#define VR82 0x82 +#define VR83 0x83 +#define VR84 0x84 +#define VR85 0x85 +#define VR86 0x86 +#define VR87 0x87 + +/* VR88 GPIO 8 + */ +#define VR88 0x88 + +/* Graphics BIOS scratch 0 + */ +#define VR8E 0x8E +# define VR8E_PANEL_TYPE_MASK (0xf << 0) +# define VR8E_PANEL_INTERFACE_CMOS (0 << 4) +# define VR8E_PANEL_INTERFACE_LVDS (1 << 4) +# define VR8E_FORCE_DEFAULT_PANEL (1 << 5) + +/* Graphics BIOS scratch 1 + */ +#define VR8F 0x8F +# define VR8F_VCH_PRESENT (1 << 0) +# define VR8F_DISPLAY_CONN (1 << 1) +# define VR8F_POWER_MASK (0x3c) +# define VR8F_POWER_POS (2) + + +struct ivch_priv { + bool quiet; + + uint16_t width, height; + + uint16_t save_VR01; + uint16_t save_VR40; +}; + + +static void ivch_dump_regs(struct intel_dvo_device *dvo); + +/** + * Reads a register on the ivch. + * + * Each of the 256 registers are 16 bits long. + */ +static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data) +{ + struct ivch_priv *priv = dvo->dev_priv; + struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + u8 out_buf[1]; + u8 in_buf[2]; + + struct i2c_msg msgs[] = { + { + .addr = i2cbus->slave_addr, + .flags = I2C_M_RD, + .len = 0, + }, + { + .addr = 0, + .flags = I2C_M_NOSTART, + .len = 1, + .buf = out_buf, + }, + { + .addr = i2cbus->slave_addr, + .flags = I2C_M_RD | I2C_M_NOSTART, + .len = 2, + .buf = in_buf, + } + }; + + out_buf[0] = addr; + + if (i2c_transfer(&i2cbus->adapter, msgs, 3) == 3) { + *data = (in_buf[1] << 8) | in_buf[0]; + return true; + }; + + if (!priv->quiet) { + DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n", + addr, i2cbus->adapter.name, i2cbus->slave_addr); + } + return false; +} + +/** Writes a 16-bit register on the ivch */ +static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data) +{ + struct ivch_priv *priv = dvo->dev_priv; + struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + u8 out_buf[3]; + struct i2c_msg msg = { + .addr = i2cbus->slave_addr, + .flags = 0, + .len = 3, + .buf = out_buf, + }; + + out_buf[0] = addr; + out_buf[1] = data & 0xff; + out_buf[2] = data >> 8; + + if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1) + return true; + + if (!priv->quiet) { + DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n", + addr, i2cbus->adapter.name, i2cbus->slave_addr); + } + + return false; +} + +/** Probes the given bus and slave address for an ivch */ +static bool ivch_init(struct intel_dvo_device *dvo, + struct intel_i2c_chan *i2cbus) +{ + struct ivch_priv *priv; + uint16_t temp; + + priv = kzalloc(sizeof(struct ivch_priv), GFP_KERNEL); + if (priv == NULL) + return false; + + dvo->i2c_bus = i2cbus; + dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->dev_priv = priv; + priv->quiet = true; + + if (!ivch_read(dvo, VR00, &temp)) + goto out; + priv->quiet = false; + + /* Since the identification bits are probably zeroes, which doesn't seem + * very unique, check that the value in the base address field matches + * the address it's responding on. + */ + if ((temp & VR00_BASE_ADDRESS_MASK) != dvo->slave_addr) { + DRM_DEBUG("ivch detect failed due to address mismatch " + "(%d vs %d)\n", + (temp & VR00_BASE_ADDRESS_MASK), dvo->slave_addr); + goto out; + } + + ivch_read(dvo, VR20, &priv->width); + ivch_read(dvo, VR21, &priv->height); + + return true; + +out: + kfree(priv); + return false; +} + +static enum drm_connector_status ivch_detect(struct intel_dvo_device *dvo) +{ + return connector_status_connected; +} + +static enum drm_mode_status ivch_mode_valid(struct intel_dvo_device *dvo, + struct drm_display_mode *mode) +{ + if (mode->clock > 112000) + return MODE_CLOCK_HIGH; + + return MODE_OK; +} + +/** Sets the power state of the panel connected to the ivch */ +static void ivch_dpms(struct intel_dvo_device *dvo, int mode) +{ + int i; + uint16_t vr01, vr30, backlight; + + /* Set the new power state of the panel. */ + if (!ivch_read(dvo, VR01, &vr01)) + return; + + if (mode == DRM_MODE_DPMS_ON) + backlight = 1; + else + backlight = 0; + ivch_write(dvo, VR80, backlight); + + if (mode == DRM_MODE_DPMS_ON) + vr01 |= VR01_LCD_ENABLE | VR01_DVO_ENABLE; + else + vr01 &= ~(VR01_LCD_ENABLE | VR01_DVO_ENABLE); + + ivch_write(dvo, VR01, vr01); + + /* Wait for the panel to make its state transition */ + for (i = 0; i < 100; i++) { + if (!ivch_read(dvo, VR30, &vr30)) + break; + + if (((vr30 & VR30_PANEL_ON) != 0) == (mode == DRM_MODE_DPMS_ON)) + break; + udelay(1000); + } + /* wait some more; vch may fail to resync sometimes without this */ + udelay(16 * 1000); +} + +static void ivch_mode_set(struct intel_dvo_device *dvo, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + uint16_t vr40 = 0; + uint16_t vr01; + + vr01 = 0; + vr40 = (VR40_STALL_ENABLE | VR40_VERTICAL_INTERP_ENABLE | + VR40_HORIZONTAL_INTERP_ENABLE); + + if (mode->hdisplay != adjusted_mode->hdisplay || + mode->vdisplay != adjusted_mode->vdisplay) { + uint16_t x_ratio, y_ratio; + + vr01 |= VR01_PANEL_FIT_ENABLE; + vr40 |= VR40_CLOCK_GATING_ENABLE; + x_ratio = (((mode->hdisplay - 1) << 16) / + (adjusted_mode->hdisplay - 1)) >> 2; + y_ratio = (((mode->vdisplay - 1) << 16) / + (adjusted_mode->vdisplay - 1)) >> 2; + ivch_write (dvo, VR42, x_ratio); + ivch_write (dvo, VR41, y_ratio); + } else { + vr01 &= ~VR01_PANEL_FIT_ENABLE; + vr40 &= ~VR40_CLOCK_GATING_ENABLE; + } + vr40 &= ~VR40_AUTO_RATIO_ENABLE; + + ivch_write(dvo, VR01, vr01); + ivch_write(dvo, VR40, vr40); + + ivch_dump_regs(dvo); +} + +static void ivch_dump_regs(struct intel_dvo_device *dvo) +{ + uint16_t val; + + ivch_read(dvo, VR00, &val); + DRM_DEBUG("VR00: 0x%04x\n", val); + ivch_read(dvo, VR01, &val); + DRM_DEBUG("VR01: 0x%04x\n", val); + ivch_read(dvo, VR30, &val); + DRM_DEBUG("VR30: 0x%04x\n", val); + ivch_read(dvo, VR40, &val); + DRM_DEBUG("VR40: 0x%04x\n", val); + + /* GPIO registers */ + ivch_read(dvo, VR80, &val); + DRM_DEBUG("VR80: 0x%04x\n", val); + ivch_read(dvo, VR81, &val); + DRM_DEBUG("VR81: 0x%04x\n", val); + ivch_read(dvo, VR82, &val); + DRM_DEBUG("VR82: 0x%04x\n", val); + ivch_read(dvo, VR83, &val); + DRM_DEBUG("VR83: 0x%04x\n", val); + ivch_read(dvo, VR84, &val); + DRM_DEBUG("VR84: 0x%04x\n", val); + ivch_read(dvo, VR85, &val); + DRM_DEBUG("VR85: 0x%04x\n", val); + ivch_read(dvo, VR86, &val); + DRM_DEBUG("VR86: 0x%04x\n", val); + ivch_read(dvo, VR87, &val); + DRM_DEBUG("VR87: 0x%04x\n", val); + ivch_read(dvo, VR88, &val); + DRM_DEBUG("VR88: 0x%04x\n", val); + + /* Scratch register 0 - AIM Panel type */ + ivch_read(dvo, VR8E, &val); + DRM_DEBUG("VR8E: 0x%04x\n", val); + + /* Scratch register 1 - Status register */ + ivch_read(dvo, VR8F, &val); + DRM_DEBUG("VR8F: 0x%04x\n", val); +} + +static void ivch_save(struct intel_dvo_device *dvo) +{ + struct ivch_priv *priv = dvo->dev_priv; + + ivch_read(dvo, VR01, &priv->save_VR01); + ivch_read(dvo, VR40, &priv->save_VR40); +} + +static void ivch_restore(struct intel_dvo_device *dvo) +{ + struct ivch_priv *priv = dvo->dev_priv; + + ivch_write(dvo, VR01, priv->save_VR01); + ivch_write(dvo, VR40, priv->save_VR40); +} + +static void ivch_destroy(struct intel_dvo_device *dvo) +{ + struct ivch_priv *priv = dvo->dev_priv; + + if (priv) { + kfree(priv); + dvo->dev_priv = NULL; + } +} + +struct intel_dvo_dev_ops ivch_ops= { + .init = ivch_init, + .dpms = ivch_dpms, + .save = ivch_save, + .restore = ivch_restore, + .mode_valid = ivch_mode_valid, + .mode_set = ivch_mode_set, + .detect = ivch_detect, + .dump_regs = ivch_dump_regs, + .destroy = ivch_destroy, +}; |