diff options
Diffstat (limited to 'drivers/media/pci/cx23885/cx23885-dvb.c')
| -rw-r--r-- | drivers/media/pci/cx23885/cx23885-dvb.c | 66 |
1 files changed, 51 insertions, 15 deletions
diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c index 2f5b902e63a..9c5ed10b2c5 100644 --- a/drivers/media/pci/cx23885/cx23885-dvb.c +++ b/drivers/media/pci/cx23885/cx23885-dvb.c @@ -57,6 +57,7 @@ #include "netup-init.h" #include "lgdt3305.h" #include "atbm8830.h" +#include "ts2020.h" #include "ds3000.h" #include "cx23885-f300.h" #include "altera-ci.h" @@ -66,6 +67,8 @@ #include "stv090x.h" #include "stb6100.h" #include "stb6100_cfg.h" +#include "tda10071.h" +#include "a8293.h" static unsigned int debug; @@ -469,6 +472,11 @@ static struct ds3000_config tevii_ds3000_config = { .demod_address = 0x68, }; +static struct ts2020_config tevii_ts2020_config = { + .tuner_address = 0x60, + .clk_out_div = 1, +}; + static struct cx24116_config dvbworld_cx24116_config = { .demod_address = 0x05, }; @@ -493,20 +501,20 @@ static struct xc5000_config mygica_x8506_xc5000_config = { }; static struct stv090x_config prof_8000_stv090x_config = { - .device = STV0903, - .demod_mode = STV090x_SINGLE, - .clk_mode = STV090x_CLK_EXT, - .xtal = 27000000, - .address = 0x6A, - .ts1_mode = STV090x_TSMODE_PARALLEL_PUNCTURED, - .repeater_level = STV090x_RPTLEVEL_64, - .adc1_range = STV090x_ADC_2Vpp, - .diseqc_envelope_mode = false, - - .tuner_get_frequency = stb6100_get_frequency, - .tuner_set_frequency = stb6100_set_frequency, - .tuner_set_bandwidth = stb6100_set_bandwidth, - .tuner_get_bandwidth = stb6100_get_bandwidth, + .device = STV0903, + .demod_mode = STV090x_SINGLE, + .clk_mode = STV090x_CLK_EXT, + .xtal = 27000000, + .address = 0x6A, + .ts1_mode = STV090x_TSMODE_PARALLEL_PUNCTURED, + .repeater_level = STV090x_RPTLEVEL_64, + .adc1_range = STV090x_ADC_2Vpp, + .diseqc_envelope_mode = false, + + .tuner_get_frequency = stb6100_get_frequency, + .tuner_set_frequency = stb6100_set_frequency, + .tuner_set_bandwidth = stb6100_set_bandwidth, + .tuner_get_bandwidth = stb6100_get_bandwidth, }; static struct stb6100_config prof_8000_stb6100_config = { @@ -659,6 +667,20 @@ static struct mt2063_config terratec_mt2063_config[] = { }, }; +static const struct tda10071_config hauppauge_tda10071_config = { + .demod_i2c_addr = 0x05, + .tuner_i2c_addr = 0x54, + .i2c_wr_max = 64, + .ts_mode = TDA10071_TS_SERIAL, + .spec_inv = 0, + .xtal = 40444000, /* 40.444 MHz */ + .pll_multiplier = 20, +}; + +static const struct a8293_config hauppauge_a8293_config = { + .i2c_addr = 0x0b, +}; + static int netup_altera_fpga_rw(void *device, int flag, int data, int read) { struct cx23885_dev *dev = (struct cx23885_dev *)device; @@ -1011,8 +1033,11 @@ static int dvb_register(struct cx23885_tsport *port) fe0->dvb.frontend = dvb_attach(ds3000_attach, &tevii_ds3000_config, &i2c_bus->i2c_adap); - if (fe0->dvb.frontend != NULL) + if (fe0->dvb.frontend != NULL) { + dvb_attach(ts2020_attach, fe0->dvb.frontend, + &tevii_ts2020_config, &i2c_bus->i2c_adap); fe0->dvb.frontend->ops.set_voltage = f300_set_voltage; + } break; case CX23885_BOARD_DVBWORLD_2005: @@ -1242,6 +1267,17 @@ static int dvb_register(struct cx23885_tsport *port) fe0->dvb.frontend->ops.set_voltage = p8000_set_voltage; } break; + case CX23885_BOARD_HAUPPAUGE_HVR4400: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(tda10071_attach, + &hauppauge_tda10071_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(a8293_attach, fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &hauppauge_a8293_config); + } + break; default: printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " " isn't supported yet\n", |