diff options
Diffstat (limited to 'drivers/media/video/em28xx')
| -rw-r--r-- | drivers/media/video/em28xx/em28xx-cards.c | 175 | ||||
| -rw-r--r-- | drivers/media/video/em28xx/em28xx-core.c | 8 | ||||
| -rw-r--r-- | drivers/media/video/em28xx/em28xx-dvb.c | 2 | ||||
| -rw-r--r-- | drivers/media/video/em28xx/em28xx-reg.h | 3 | ||||
| -rw-r--r-- | drivers/media/video/em28xx/em28xx-video.c | 77 | ||||
| -rw-r--r-- | drivers/media/video/em28xx/em28xx.h | 3 |
6 files changed, 180 insertions, 88 deletions
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 320f1f60276..ed281f56594 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -218,7 +218,7 @@ static struct em28xx_reg_seq silvercrest_reg_seq[] = { struct em28xx_board em28xx_boards[] = { [EM2750_BOARD_UNKNOWN] = { .name = "EM2710/EM2750/EM2751 webcam grabber", - .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, + .xclk = EM28XX_XCLK_FREQUENCY_20MHZ, .tuner_type = TUNER_ABSENT, .is_webcam = 1, .input = { { @@ -622,22 +622,27 @@ struct em28xx_board em28xx_boards[] = { }, [EM2861_BOARD_PLEXTOR_PX_TV100U] = { .name = "Plextor ConvertX PX-TV100U", - .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_TNF_5335MF, + .xclk = EM28XX_XCLK_I2S_MSB_TIMING | + EM28XX_XCLK_FREQUENCY_12MHZ, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_TVP5150, + .has_msp34xx = 1, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, + .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, + .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, + .gpio = pinnacle_hybrid_pro_analog, } }, }, @@ -1544,6 +1549,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2750_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2800), .driver_info = EM2800_BOARD_UNKNOWN }, + { USB_DEVICE(0xeb1a, 0x2710), + .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2820), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2821), @@ -1761,6 +1768,7 @@ static int em28xx_hint_sensor(struct em28xx *dev) __be16 version_be; u16 version; + /* Micron sensor detection */ dev->i2c_client.addr = 0xba >> 1; cmd = 0; i2c_master_send(&dev->i2c_client, &cmd, 1); @@ -1769,15 +1777,27 @@ static int em28xx_hint_sensor(struct em28xx *dev) return -EINVAL; version = be16_to_cpu(version_be); - switch (version) { - case 0x8243: /* mt9v011 640x480 1.3 Mpix sensor */ + case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */ + case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */ dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; + em28xx_set_model(dev); + sensor_name = "mt9v011"; dev->em28xx_sensor = EM28XX_MT9V011; dev->sensor_xres = 640; dev->sensor_yres = 480; - dev->sensor_xtal = 6300000; + /* + * FIXME: mt9v011 uses I2S speed as xtal clk - at least with + * the Silvercrest cam I have here for testing - for higher + * resolutions, a high clock cause horizontal artifacts, so we + * need to use a lower xclk frequency. + * Yet, it would be possible to adjust xclk depending on the + * desired resolution, since this affects directly the + * frame rate. + */ + dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ; + dev->sensor_xtal = 4300000; /* probably means GRGB 16 bit bayer */ dev->vinmode = 0x0d; @@ -1786,6 +1806,8 @@ static int em28xx_hint_sensor(struct em28xx *dev) break; case 0x8431: dev->model = EM2750_BOARD_UNKNOWN; + em28xx_set_model(dev); + sensor_name = "mt9m001"; dev->em28xx_sensor = EM28XX_MT9M001; em28xx_initialize_mt9m001(dev); @@ -1802,6 +1824,9 @@ static int em28xx_hint_sensor(struct em28xx *dev) return -EINVAL; } + /* Setup webcam defaults */ + em28xx_pre_card_setup(dev); + em28xx_errdev("Sensor is %s, using model %s entry.\n", sensor_name, em28xx_boards[dev->model].name); @@ -1813,60 +1838,6 @@ static int em28xx_hint_sensor(struct em28xx *dev) */ void em28xx_pre_card_setup(struct em28xx *dev) { - int rc; - - em28xx_set_model(dev); - - em28xx_info("Identified as %s (card=%d)\n", - dev->board.name, dev->model); - - /* Set the default GPO/GPIO for legacy devices */ - dev->reg_gpo_num = EM2880_R04_GPO; - dev->reg_gpio_num = EM28XX_R08_GPIO; - - dev->wait_after_write = 5; - - /* Based on the Chip ID, set the device configuration */ - rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); - if (rc > 0) { - dev->chip_id = rc; - - switch (dev->chip_id) { - case CHIP_ID_EM2750: - em28xx_info("chip ID is em2750\n"); - break; - case CHIP_ID_EM2820: - em28xx_info("chip ID is em2710 or em2820\n"); - break; - case CHIP_ID_EM2840: - em28xx_info("chip ID is em2840\n"); - break; - case CHIP_ID_EM2860: - em28xx_info("chip ID is em2860\n"); - break; - case CHIP_ID_EM2870: - em28xx_info("chip ID is em2870\n"); - dev->wait_after_write = 0; - break; - case CHIP_ID_EM2874: - em28xx_info("chip ID is em2874\n"); - dev->reg_gpio_num = EM2874_R80_GPIO; - dev->wait_after_write = 0; - break; - case CHIP_ID_EM2883: - em28xx_info("chip ID is em2882/em2883\n"); - dev->wait_after_write = 0; - break; - default: - em28xx_info("em28xx chip ID = %d\n", dev->chip_id); - } - } - - /* Prepopulate cached GPO register content */ - rc = em28xx_read_reg(dev, dev->reg_gpo_num); - if (rc >= 0) - dev->reg_gpo = rc; - /* Set the initial XCLK and I2C clock values based on the board definition */ em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f); @@ -1876,9 +1847,8 @@ void em28xx_pre_card_setup(struct em28xx *dev) /* request some modules */ switch (dev->model) { case EM2861_BOARD_PLEXTOR_PX_TV100U: - /* FIXME guess */ - /* Turn on analog audio output */ - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); + /* Sets the msp34xx I2S speed */ + dev->i2s_speed = 2048000; break; case EM2861_BOARD_KWORLD_PVRTV_300U: case EM2880_BOARD_KWORLD_DVB_305U: @@ -2216,7 +2186,20 @@ void em28xx_register_i2c_ir(struct em28xx *dev) void em28xx_card_setup(struct em28xx *dev) { - em28xx_set_model(dev); + /* + * If the device can be a webcam, seek for a sensor. + * If sensor is not found, then it isn't a webcam. + */ + if (dev->board.is_webcam) { + if (em28xx_hint_sensor(dev) < 0) + dev->board.is_webcam = 0; + else + dev->progressive = 1; + } else + em28xx_set_model(dev); + + em28xx_info("Identified as %s (card=%d)\n", + dev->board.name, dev->model); dev->tuner_type = em28xx_boards[dev->model].tuner_type; if (em28xx_boards[dev->model].tuner_addr) @@ -2290,10 +2273,6 @@ void em28xx_card_setup(struct em28xx *dev) em28xx_gpio_set(dev, dev->board.tuner_gpio); em28xx_set_mode(dev, EM28XX_ANALOG_MODE); break; - case EM2820_BOARD_SILVERCREST_WEBCAM: - /* FIXME: need to document the registers bellow */ - em28xx_write_reg(dev, 0x0d, 0x42); - em28xx_write_reg(dev, 0x13, 0x08); } if (dev->board.has_snapshot_button) @@ -2433,7 +2412,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, int minor) { struct em28xx *dev = *devhandle; - int retval = -ENOMEM; + int retval; int errCode; dev->udev = udev; @@ -2450,6 +2429,58 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, dev->em28xx_read_reg_req = em28xx_read_reg_req; dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800; + em28xx_set_model(dev); + + /* Set the default GPO/GPIO for legacy devices */ + dev->reg_gpo_num = EM2880_R04_GPO; + dev->reg_gpio_num = EM28XX_R08_GPIO; + + dev->wait_after_write = 5; + + /* Based on the Chip ID, set the device configuration */ + retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); + if (retval > 0) { + dev->chip_id = retval; + + switch (dev->chip_id) { + case CHIP_ID_EM2710: + em28xx_info("chip ID is em2710\n"); + break; + case CHIP_ID_EM2750: + em28xx_info("chip ID is em2750\n"); + break; + case CHIP_ID_EM2820: + em28xx_info("chip ID is em2820 (or em2710)\n"); + break; + case CHIP_ID_EM2840: + em28xx_info("chip ID is em2840\n"); + break; + case CHIP_ID_EM2860: + em28xx_info("chip ID is em2860\n"); + break; + case CHIP_ID_EM2870: + em28xx_info("chip ID is em2870\n"); + dev->wait_after_write = 0; + break; + case CHIP_ID_EM2874: + em28xx_info("chip ID is em2874\n"); + dev->reg_gpio_num = EM2874_R80_GPIO; + dev->wait_after_write = 0; + break; + case CHIP_ID_EM2883: + em28xx_info("chip ID is em2882/em2883\n"); + dev->wait_after_write = 0; + break; + default: + em28xx_info("em28xx chip ID = %d\n", dev->chip_id); + } + } + + /* Prepopulate cached GPO register content */ + retval = em28xx_read_reg(dev, dev->reg_gpo_num); + if (retval >= 0) + dev->reg_gpo = retval; + em28xx_pre_card_setup(dev); if (!dev->board.is_em2800) { @@ -2484,14 +2515,6 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, dev->vinmode = 0x10; dev->vinctl = 0x11; - /* - * If the device can be a webcam, seek for a sensor. - * If sensor is not found, then it isn't a webcam. - */ - if (dev->board.is_webcam) - if (em28xx_hint_sensor(dev) < 0) - dev->board.is_webcam = 0; - /* Do board specific init and eeprom reading */ em28xx_card_setup(dev); diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index 5b78e199abd..98e140b5d95 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -632,6 +632,9 @@ int em28xx_capture_start(struct em28xx *dev, int start) return rc; } + if (dev->board.is_webcam) + rc = em28xx_write_reg(dev, 0x13, 0x0c); + /* enable video capture */ rc = em28xx_write_reg(dev, 0x48, 0x00); @@ -720,7 +723,10 @@ int em28xx_resolution_set(struct em28xx *dev) { int width, height; width = norm_maxw(dev); - height = norm_maxh(dev) >> 1; + height = norm_maxh(dev); + + if (!dev->progressive) + height >>= norm_maxh(dev); em28xx_set_outfmt(dev); diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index cf0ac7f2a30..d603575431b 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -478,7 +478,6 @@ static int dvb_init(struct em28xx *dev) } break; case EM2880_BOARD_KWORLD_DVB_310U: - case EM2880_BOARD_EMPIRE_DUAL_TV: dvb->frontend = dvb_attach(zl10353_attach, &em28xx_zl10353_with_xc3028, &dev->i2c_adap); @@ -488,6 +487,7 @@ static int dvb_init(struct em28xx *dev) } break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: + case EM2880_BOARD_EMPIRE_DUAL_TV: dvb->frontend = dvb_attach(zl10353_attach, &em28xx_zl10353_xc3028_no_i2c_gate, &dev->i2c_adap); diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h index a2676d63cfd..6bf84bd787d 100644 --- a/drivers/media/video/em28xx/em28xx-reg.h +++ b/drivers/media/video/em28xx/em28xx-reg.h @@ -176,7 +176,8 @@ /* FIXME: Need to be populated with the other chip ID's */ enum em28xx_chip_id { - CHIP_ID_EM2820 = 18, /* Also used by em2710 */ + CHIP_ID_EM2710 = 17, + CHIP_ID_EM2820 = 18, /* Also used by some em2710 */ CHIP_ID_EM2840 = 20, CHIP_ID_EM2750 = 33, CHIP_ID_EM2860 = 34, diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index ff37b4c15f4..ab079d9256c 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -194,15 +194,24 @@ static void em28xx_copy_video(struct em28xx *dev, startread = p; remain = len; - /* Interlaces frame */ - if (buf->top_field) + if (dev->progressive) fieldstart = outp; - else - fieldstart = outp + bytesperline; + else { + /* Interlaces two half frames */ + if (buf->top_field) + fieldstart = outp; + else + fieldstart = outp + bytesperline; + } linesdone = dma_q->pos / bytesperline; currlinedone = dma_q->pos % bytesperline; - offset = linesdone * bytesperline * 2 + currlinedone; + + if (dev->progressive) + offset = linesdone * bytesperline + currlinedone; + else + offset = linesdone * bytesperline * 2 + currlinedone; + startwrite = fieldstart + offset; lencopy = bytesperline - currlinedone; lencopy = lencopy > remain ? remain : lencopy; @@ -376,7 +385,7 @@ static inline int em28xx_isoc_copy(struct em28xx *dev, struct urb *urb) em28xx_isocdbg("Video frame %d, length=%i, %s\n", p[2], len, (p[2] & 1) ? "odd" : "even"); - if (!(p[2] & 1)) { + if (dev->progressive || !(p[2] & 1)) { if (buf != NULL) buffer_filled(dev, dma_q, buf); get_next_buf(dma_q, &buf); @@ -689,7 +698,10 @@ static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; /* FIXME: TOP? NONE? BOTTOM? ALTENATE? */ - f->fmt.pix.field = dev->interlaced ? + if (dev->progressive) + f->fmt.pix.field = V4L2_FIELD_NONE; + else + f->fmt.pix.field = dev->interlaced ? V4L2_FIELD_INTERLACED : V4L2_FIELD_TOP; mutex_unlock(&dev->lock); @@ -753,7 +765,11 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, f->fmt.pix.bytesperline = (dev->width * fmt->depth + 7) >> 3; f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * height; f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; - f->fmt.pix.field = V4L2_FIELD_INTERLACED; + if (dev->progressive) + f->fmt.pix.field = V4L2_FIELD_NONE; + else + f->fmt.pix.field = dev->interlaced ? + V4L2_FIELD_INTERLACED : V4L2_FIELD_TOP; return 0; } @@ -846,6 +862,41 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *norm) return 0; } +static int vidioc_g_parm(struct file *file, void *priv, + struct v4l2_streamparm *p) +{ + struct em28xx_fh *fh = priv; + struct em28xx *dev = fh->dev; + int rc = 0; + + if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (dev->board.is_webcam) + rc = v4l2_device_call_until_err(&dev->v4l2_dev, 0, + video, g_parm, p); + else + v4l2_video_std_frame_period(dev->norm, + &p->parm.capture.timeperframe); + + return rc; +} + +static int vidioc_s_parm(struct file *file, void *priv, + struct v4l2_streamparm *p) +{ + struct em28xx_fh *fh = priv; + struct em28xx *dev = fh->dev; + + if (!dev->board.is_webcam) + return -EINVAL; + + if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + return v4l2_device_call_until_err(&dev->v4l2_dev, 0, video, s_parm, p); +} + static const char *iname[] = { [EM28XX_VMUX_COMPOSITE1] = "Composite1", [EM28XX_VMUX_COMPOSITE2] = "Composite2", @@ -1624,6 +1675,7 @@ static int em28xx_v4l2_open(struct file *filp) struct em28xx *dev; enum v4l2_buf_type fh_type; struct em28xx_fh *fh; + enum v4l2_field field; dev = em28xx_get_device(minor, &fh_type, &radio); @@ -1665,8 +1717,13 @@ static int em28xx_v4l2_open(struct file *filp) dev->users++; + if (dev->progressive) + field = V4L2_FIELD_NONE; + else + field = V4L2_FIELD_INTERLACED; + videobuf_queue_vmalloc_init(&fh->vb_vidq, &em28xx_video_qops, - NULL, &dev->slock, fh->type, V4L2_FIELD_INTERLACED, + NULL, &dev->slock, fh->type, field, sizeof(struct em28xx_buffer), fh); mutex_unlock(&dev->lock); @@ -1885,6 +1942,8 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = { .vidioc_qbuf = vidioc_qbuf, .vidioc_dqbuf = vidioc_dqbuf, .vidioc_s_std = vidioc_s_std, + .vidioc_g_parm = vidioc_g_parm, + .vidioc_s_parm = vidioc_s_parm, .vidioc_enum_input = vidioc_enum_input, .vidioc_g_input = vidioc_g_input, .vidioc_s_input = vidioc_s_input, diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 45bd513f62d..8c2dc38bca9 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -484,6 +484,9 @@ struct em28xx { int sensor_xres, sensor_yres; int sensor_xtal; + /* Allows progressive (e. g. non-interlaced) mode */ + int progressive; + /* Vinmode/Vinctl used at the driver */ int vinmode, vinctl; |