diff options
Diffstat (limited to 'drivers/mfd')
| -rw-r--r-- | drivers/mfd/ab8500-core.c | 544 | ||||
| -rw-r--r-- | drivers/mfd/ab8500-debugfs.c | 1741 | ||||
| -rw-r--r-- | drivers/mfd/ab8500-gpadc.c | 559 | ||||
| -rw-r--r-- | drivers/mfd/ab8500-sysctrl.c | 98 |
4 files changed, 2548 insertions, 394 deletions
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 7c84ced2e01..f276352cc9e 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -95,6 +95,7 @@ #define AB8500_IT_MASK22_REG 0x55 #define AB8500_IT_MASK23_REG 0x56 #define AB8500_IT_MASK24_REG 0x57 +#define AB8500_IT_MASK25_REG 0x58 /* * latch hierarchy registers @@ -102,15 +103,25 @@ #define AB8500_IT_LATCHHIER1_REG 0x60 #define AB8500_IT_LATCHHIER2_REG 0x61 #define AB8500_IT_LATCHHIER3_REG 0x62 +#define AB8540_IT_LATCHHIER4_REG 0x63 #define AB8500_IT_LATCHHIER_NUM 3 +#define AB8540_IT_LATCHHIER_NUM 4 #define AB8500_REV_REG 0x80 #define AB8500_IC_NAME_REG 0x82 #define AB8500_SWITCH_OFF_STATUS 0x00 #define AB8500_TURN_ON_STATUS 0x00 +#define AB8505_TURN_ON_STATUS_2 0x04 +#define AB8500_CH_USBCH_STAT1_REG 0x02 +#define VBUS_DET_DBNC100 0x02 +#define VBUS_DET_DBNC1 0x01 + +static DEFINE_SPINLOCK(on_stat_lock); +static u8 turn_on_stat_mask = 0xFF; +static u8 turn_on_stat_set; static bool no_bm; /* No battery management */ module_param(no_bm, bool, S_IRUGO); @@ -130,9 +141,15 @@ static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = { 0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, }; -/* AB9540 support */ +/* AB9540 / AB8505 support */ static const int ab9540_irq_regoffset[AB9540_NUM_IRQ_REGS] = { - 0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, 12, 13, 24, + 0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, 12, 13, 24, 5, 22, 23 +}; + +/* AB8540 support */ +static const int ab8540_irq_regoffset[AB8540_NUM_IRQ_REGS] = { + 0, 1, 2, 3, 4, -1, -1, -1, -1, 11, 18, 19, 20, 21, 12, 13, 24, 5, 22, 23, + 25, 26, 27, 28, 29, 30, 31, }; static const char ab8500_version_str[][7] = { @@ -352,6 +369,9 @@ static void ab8500_irq_sync_unlock(struct irq_data *data) is_ab8500_1p1_or_earlier(ab8500)) continue; + if (ab8500->irq_reg_offset[i] < 0) + continue; + ab8500->oldmask[i] = new; reg = AB8500_IT_MASK1_REG + ab8500->irq_reg_offset[i]; @@ -423,6 +443,18 @@ static struct irq_chip ab8500_irq_chip = { .irq_set_type = ab8500_irq_set_type, }; +static void update_latch_offset(u8 *offset, int i) +{ + /* Fix inconsistent ITFromLatch25 bit mapping... */ + if (unlikely(*offset == 17)) + *offset = 24; + /* Fix inconsistent ab8540 bit mapping... */ + if (unlikely(*offset == 16)) + *offset = 25; + if ((i==3) && (*offset >= 24)) + *offset += 2; +} + static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500, int latch_offset, u8 latch_val) { @@ -474,9 +506,7 @@ static int ab8500_handle_hierarchical_latch(struct ab8500 *ab8500, latch_bit = __ffs(hier_val); latch_offset = (hier_offset << 3) + latch_bit; - /* Fix inconsistent ITFromLatch25 bit mapping... */ - if (unlikely(latch_offset == 17)) - latch_offset = 24; + update_latch_offset(&latch_offset, hier_offset); status = get_register_interruptible(ab8500, AB8500_INTERRUPT, @@ -504,7 +534,7 @@ static irqreturn_t ab8500_hierarchical_irq(int irq, void *dev) dev_vdbg(ab8500->dev, "interrupt\n"); /* Hierarchical interrupt version */ - for (i = 0; i < AB8500_IT_LATCHHIER_NUM; i++) { + for (i = 0; i < (ab8500->it_latchhier_num); i++) { int status; u8 hier_val; @@ -520,63 +550,6 @@ static irqreturn_t ab8500_hierarchical_irq(int irq, void *dev) return IRQ_HANDLED; } -/** - * ab8500_irq_get_virq(): Map an interrupt on a chip to a virtual IRQ - * - * @ab8500: ab8500_irq controller to operate on. - * @irq: index of the interrupt requested in the chip IRQs - * - * Useful for drivers to request their own IRQs. - */ -static int ab8500_irq_get_virq(struct ab8500 *ab8500, int irq) -{ - if (!ab8500) - return -EINVAL; - - return irq_create_mapping(ab8500->domain, irq); -} - -static irqreturn_t ab8500_irq(int irq, void *dev) -{ - struct ab8500 *ab8500 = dev; - int i; - - dev_vdbg(ab8500->dev, "interrupt\n"); - - atomic_inc(&ab8500->transfer_ongoing); - - for (i = 0; i < ab8500->mask_size; i++) { - int regoffset = ab8500->irq_reg_offset[i]; - int status; - u8 value; - - /* - * Interrupt register 12 doesn't exist prior to AB8500 version - * 2.0 - */ - if (regoffset == 11 && is_ab8500_1p1_or_earlier(ab8500)) - continue; - - status = get_register_interruptible(ab8500, AB8500_INTERRUPT, - AB8500_IT_LATCH1_REG + regoffset, &value); - if (status < 0 || value == 0) - continue; - - do { - int bit = __ffs(value); - int line = i * 8 + bit; - int virq = ab8500_irq_get_virq(ab8500, line); - - handle_nested_irq(virq); - ab8500_debug_register_interrupt(line); - value &= ~(1 << bit); - - } while (value); - } - atomic_dec(&ab8500->transfer_ongoing); - return IRQ_HANDLED; -} - static int ab8500_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq) { @@ -607,7 +580,9 @@ static int ab8500_irq_init(struct ab8500 *ab8500, struct device_node *np) { int num_irqs; - if (is_ab9540(ab8500)) + if (is_ab8540(ab8500)) + num_irqs = AB8540_NR_IRQS; + else if (is_ab9540(ab8500)) num_irqs = AB9540_NR_IRQS; else if (is_ab8505(ab8500)) num_irqs = AB8505_NR_IRQS; @@ -650,6 +625,15 @@ static struct resource ab8500_gpadc_resources[] = { }, }; +static struct resource ab8505_gpadc_resources[] = { + { + .name = "SW_CONV_END", + .start = AB8500_INT_GP_SW_ADC_CONV_END, + .end = AB8500_INT_GP_SW_ADC_CONV_END, + .flags = IORESOURCE_IRQ, + }, +}; + static struct resource ab8500_rtc_resources[] = { { .name = "60S", @@ -973,6 +957,30 @@ static struct resource ab8505_iddet_resources[] = { .end = AB8505_INT_KEYSTUCK, .flags = IORESOURCE_IRQ, }, + { + .name = "VBUS_DET_R", + .start = AB8500_INT_VBUS_DET_R, + .end = AB8500_INT_VBUS_DET_R, + .flags = IORESOURCE_IRQ, + }, + { + .name = "VBUS_DET_F", + .start = AB8500_INT_VBUS_DET_F, + .end = AB8500_INT_VBUS_DET_F, + .flags = IORESOURCE_IRQ, + }, + { + .name = "ID_DET_PLUGR", + .start = AB8500_INT_ID_DET_PLUGR, + .end = AB8500_INT_ID_DET_PLUGR, + .flags = IORESOURCE_IRQ, + }, + { + .name = "ID_DET_PLUGF", + .start = AB8500_INT_ID_DET_PLUGF, + .end = AB8500_INT_ID_DET_PLUGF, + .flags = IORESOURCE_IRQ, + }, }; static struct resource ab8500_temp_resources[] = { @@ -984,7 +992,42 @@ static struct resource ab8500_temp_resources[] = { }, }; -static struct mfd_cell abx500_common_devs[] = { +static struct mfd_cell ab8500_bm_devs[] = { + { + .name = "ab8500-charger", + .of_compatible = "stericsson,ab8500-charger", + .num_resources = ARRAY_SIZE(ab8500_charger_resources), + .resources = ab8500_charger_resources, + .platform_data = &ab8500_bm_data, + .pdata_size = sizeof(ab8500_bm_data), + }, + { + .name = "ab8500-btemp", + .of_compatible = "stericsson,ab8500-btemp", + .num_resources = ARRAY_SIZE(ab8500_btemp_resources), + .resources = ab8500_btemp_resources, + .platform_data = &ab8500_bm_data, + .pdata_size = sizeof(ab8500_bm_data), + }, + { + .name = "ab8500-fg", + .of_compatible = "stericsson,ab8500-fg", + .num_resources = ARRAY_SIZE(ab8500_fg_resources), + .resources = ab8500_fg_resources, + .platform_data = &ab8500_bm_data, + .pdata_size = sizeof(ab8500_bm_data), + }, + { + .name = "ab8500-chargalg", + .of_compatible = "stericsson,ab8500-chargalg", + .num_resources = ARRAY_SIZE(ab8500_chargalg_resources), + .resources = ab8500_chargalg_resources, + .platform_data = &ab8500_bm_data, + .pdata_size = sizeof(ab8500_bm_data), + }, +}; + +static struct mfd_cell ab8500_devs[] = { #ifdef CONFIG_DEBUG_FS { .name = "ab8500-debug", @@ -1007,7 +1050,6 @@ static struct mfd_cell abx500_common_devs[] = { }, { .name = "ab8500-gpadc", - .of_compatible = "stericsson,ab8500-gpadc", .num_resources = ARRAY_SIZE(ab8500_gpadc_resources), .resources = ab8500_gpadc_resources, }, @@ -1024,6 +1066,7 @@ static struct mfd_cell abx500_common_devs[] = { .resources = ab8500_av_acc_detect_resources, }, { + .name = "ab8500-poweron-key", .of_compatible = "stericsson,ab8500-poweron-key", .num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources), @@ -1053,82 +1096,220 @@ static struct mfd_cell abx500_common_devs[] = { .of_compatible = "stericsson,ab8500-denc", }, { + .name = "ab8500-gpio", + .of_compatible = "stericsson,ab8500-gpio", + }, + { .name = "abx500-temp", .of_compatible = "stericsson,abx500-temp", .num_resources = ARRAY_SIZE(ab8500_temp_resources), .resources = ab8500_temp_resources, }, + { + .name = "ab8500-usb", + .num_resources = ARRAY_SIZE(ab8500_usb_resources), + .resources = ab8500_usb_resources, + }, + { + .name = "ab8500-codec", + }, }; -static struct mfd_cell ab8500_bm_devs[] = { +static struct mfd_cell ab9540_devs[] = { +#ifdef CONFIG_DEBUG_FS { - .name = "ab8500-charger", - .of_compatible = "stericsson,ab8500-charger", - .num_resources = ARRAY_SIZE(ab8500_charger_resources), - .resources = ab8500_charger_resources, - .platform_data = &ab8500_bm_data, - .pdata_size = sizeof(ab8500_bm_data), + .name = "ab8500-debug", + .num_resources = ARRAY_SIZE(ab8500_debug_resources), + .resources = ab8500_debug_resources, }, +#endif { - .name = "ab8500-btemp", - .of_compatible = "stericsson,ab8500-btemp", - .num_resources = ARRAY_SIZE(ab8500_btemp_resources), - .resources = ab8500_btemp_resources, - .platform_data = &ab8500_bm_data, - .pdata_size = sizeof(ab8500_bm_data), + .name = "ab8500-sysctrl", }, { - .name = "ab8500-fg", - .of_compatible = "stericsson,ab8500-fg", - .num_resources = ARRAY_SIZE(ab8500_fg_resources), - .resources = ab8500_fg_resources, - .platform_data = &ab8500_bm_data, - .pdata_size = sizeof(ab8500_bm_data), + .name = "ab8500-regulator", }, { - .name = "ab8500-chargalg", - .of_compatible = "stericsson,ab8500-chargalg", - .num_resources = ARRAY_SIZE(ab8500_chargalg_resources), - .resources = ab8500_chargalg_resources, - .platform_data = &ab8500_bm_data, - .pdata_size = sizeof(ab8500_bm_data), + .name = "abx500-clk", + .of_compatible = "stericsson,abx500-clk", + }, + { + .name = "ab8500-gpadc", + .of_compatible = "stericsson,ab8500-gpadc", + .num_resources = ARRAY_SIZE(ab8500_gpadc_resources), + .resources = ab8500_gpadc_resources, + }, + { + .name = "ab8500-rtc", + .num_resources = ARRAY_SIZE(ab8500_rtc_resources), + .resources = ab8500_rtc_resources, + }, + { + .name = "ab8500-acc-det", + .num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources), + .resources = ab8500_av_acc_detect_resources, + }, + { + .name = "ab8500-poweron-key", + .num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources), + .resources = ab8500_poweronkey_db_resources, + }, + { + .name = "ab8500-pwm", + .id = 1, + }, + { + .name = "ab8500-leds", + }, + { + .name = "abx500-temp", + .num_resources = ARRAY_SIZE(ab8500_temp_resources), + .resources = ab8500_temp_resources, + }, + { + .name = "pinctrl-ab9540", + .of_compatible = "stericsson,ab9540-gpio", + }, + { + .name = "ab9540-usb", + .num_resources = ARRAY_SIZE(ab8500_usb_resources), + .resources = ab8500_usb_resources, + }, + { + .name = "ab9540-codec", + }, + { + .name = "ab-iddet", + .num_resources = ARRAY_SIZE(ab8505_iddet_resources), + .resources = ab8505_iddet_resources, }, }; -static struct mfd_cell ab8500_devs[] = { +/* Device list for ab8505 */ +static struct mfd_cell ab8505_devs[] = { +#ifdef CONFIG_DEBUG_FS { - .name = "pinctrl-ab8500", - .of_compatible = "stericsson,ab8500-gpio", + .name = "ab8500-debug", + .num_resources = ARRAY_SIZE(ab8500_debug_resources), + .resources = ab8500_debug_resources, + }, +#endif + { + .name = "ab8500-sysctrl", + }, + { + .name = "ab8500-regulator", + }, + { + .name = "abx500-clk", + .of_compatible = "stericsson,abx500-clk", + }, + { + .name = "ab8500-gpadc", + .num_resources = ARRAY_SIZE(ab8505_gpadc_resources), + .resources = ab8505_gpadc_resources, + }, + { + .name = "ab8500-rtc", + .num_resources = ARRAY_SIZE(ab8500_rtc_resources), + .resources = ab8500_rtc_resources, + }, + { + .name = "ab8500-acc-det", + .num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources), + .resources = ab8500_av_acc_detect_resources, + }, + { + .name = "ab8500-poweron-key", + .num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources), + .resources = ab8500_poweronkey_db_resources, + }, + { + .name = "ab8500-pwm", + .id = 1, + }, + { + .name = "ab8500-leds", + }, + { + .name = "ab8500-gpio", }, { .name = "ab8500-usb", - .of_compatible = "stericsson,ab8500-usb", .num_resources = ARRAY_SIZE(ab8500_usb_resources), .resources = ab8500_usb_resources, }, { .name = "ab8500-codec", - .of_compatible = "stericsson,ab8500-codec", + }, + { + .name = "ab-iddet", + .num_resources = ARRAY_SIZE(ab8505_iddet_resources), + .resources = ab8505_iddet_resources, }, }; -static struct mfd_cell ab9540_devs[] = { +static struct mfd_cell ab8540_devs[] = { +#ifdef CONFIG_DEBUG_FS { - .name = "pinctrl-ab9540", - .of_compatible = "stericsson,ab9540-gpio", + .name = "ab8500-debug", + .num_resources = ARRAY_SIZE(ab8500_debug_resources), + .resources = ab8500_debug_resources, + }, +#endif + { + .name = "ab8500-sysctrl", }, { - .name = "ab9540-usb", + .name = "ab8500-regulator", + }, + { + .name = "abx500-clk", + .of_compatible = "stericsson,abx500-clk", + }, + { + .name = "ab8500-gpadc", + .num_resources = ARRAY_SIZE(ab8505_gpadc_resources), + .resources = ab8505_gpadc_resources, + }, + { + .name = "ab8500-rtc", + .num_resources = ARRAY_SIZE(ab8500_rtc_resources), + .resources = ab8500_rtc_resources, + }, + { + .name = "ab8500-acc-det", + .num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources), + .resources = ab8500_av_acc_detect_resources, + }, + { + .name = "ab8500-poweron-key", + .num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources), + .resources = ab8500_poweronkey_db_resources, + }, + { + .name = "ab8500-pwm", + .id = 1, + }, + { + .name = "ab8500-leds", + }, + { + .name = "abx500-temp", + .num_resources = ARRAY_SIZE(ab8500_temp_resources), + .resources = ab8500_temp_resources, + }, + { + .name = "ab8500-gpio", + }, + { + .name = "ab8540-usb", .num_resources = ARRAY_SIZE(ab8500_usb_resources), .resources = ab8500_usb_resources, }, { - .name = "ab9540-codec", + .name = "ab8540-codec", }, -}; - -/* Device list common to ab9540 and ab8505 */ -static struct mfd_cell ab9540_ab8505_devs[] = { { .name = "ab-iddet", .num_resources = ARRAY_SIZE(ab8505_iddet_resources), @@ -1142,6 +1323,7 @@ static ssize_t show_chip_id(struct device *dev, struct ab8500 *ab8500; ab8500 = dev_get_drvdata(dev); + return sprintf(buf, "%#x\n", ab8500 ? ab8500->chip_id : -EINVAL); } @@ -1171,6 +1353,15 @@ static ssize_t show_switch_off_status(struct device *dev, return sprintf(buf, "%#x\n", value); } +/* use mask and set to override the register turn_on_stat value */ +void ab8500_override_turn_on_stat(u8 mask, u8 set) +{ + spin_lock(&on_stat_lock); + turn_on_stat_mask = mask; + turn_on_stat_set = set; + spin_unlock(&on_stat_lock); +} + /* * ab8500 has turned on due to (TURN_ON_STATUS): * 0x01 PORnVbat @@ -1194,9 +1385,38 @@ static ssize_t show_turn_on_status(struct device *dev, AB8500_TURN_ON_STATUS, &value); if (ret < 0) return ret; + + /* + * In L9540, turn_on_status register is not updated correctly if + * the device is rebooted with AC/USB charger connected. Due to + * this, the device boots android instead of entering into charge + * only mode. Read the AC/USB status register to detect the charger + * presence and update the turn on status manually. + */ + if (is_ab9540(ab8500)) { + spin_lock(&on_stat_lock); + value = (value & turn_on_stat_mask) | turn_on_stat_set; + spin_unlock(&on_stat_lock); + } + return sprintf(buf, "%#x\n", value); } +static ssize_t show_turn_on_status_2(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int ret; + u8 value; + struct ab8500 *ab8500; + + ab8500 = dev_get_drvdata(dev); + ret = get_register_interruptible(ab8500, AB8500_SYS_CTRL1_BLOCK, + AB8505_TURN_ON_STATUS_2, &value); + if (ret < 0) + return ret; + return sprintf(buf, "%#x\n", (value & 0x1)); +} + static ssize_t show_ab9540_dbbrstn(struct device *dev, struct device_attribute *attr, char *buf) { @@ -1253,6 +1473,7 @@ exit: static DEVICE_ATTR(chip_id, S_IRUGO, show_chip_id, NULL); static DEVICE_ATTR(switch_off_status, S_IRUGO, show_switch_off_status, NULL); static DEVICE_ATTR(turn_on_status, S_IRUGO, show_turn_on_status, NULL); +static DEVICE_ATTR(turn_on_status_2, S_IRUGO, show_turn_on_status_2, NULL); static DEVICE_ATTR(dbbrstn, S_IRUGO | S_IWUSR, show_ab9540_dbbrstn, store_ab9540_dbbrstn); @@ -1263,6 +1484,11 @@ static struct attribute *ab8500_sysfs_entries[] = { NULL, }; +static struct attribute *ab8505_sysfs_entries[] = { + &dev_attr_turn_on_status_2.attr, + NULL, +}; + static struct attribute *ab9540_sysfs_entries[] = { &dev_attr_chip_id.attr, &dev_attr_switch_off_status.attr, @@ -1275,6 +1501,10 @@ static struct attribute_group ab8500_attr_group = { .attrs = ab8500_sysfs_entries, }; +static struct attribute_group ab8505_attr_group = { + .attrs = ab8505_sysfs_entries, +}; + static struct attribute_group ab9540_attr_group = { .attrs = ab9540_sysfs_entries, }; @@ -1290,6 +1520,15 @@ static int ab8500_probe(struct platform_device *pdev) "Battery level lower than power on reset threshold", "Power on key 1 pressed longer than 10 seconds", "DB8500 thermal shutdown"}; + static char *turn_on_status[] = { + "Battery rising (Vbat)", + "Power On Key 1 dbF", + "Power On Key 2 dbF", + "RTC Alarm", + "Main Charger Detect", + "Vbus Detect (USB)", + "USB ID Detect", + "UART Factory Mode Detect"}; struct ab8500_platform_data *plat = dev_get_platdata(&pdev->dev); const struct platform_device_id *platid = platform_get_device_id(pdev); enum ab8500_version version = AB8500_VERSION_UNDEFINED; @@ -1351,13 +1590,20 @@ static int ab8500_probe(struct platform_device *pdev) ab8500->chip_id >> 4, ab8500->chip_id & 0x0F); - /* Configure AB8500 or AB9540 IRQ */ - if (is_ab9540(ab8500) || is_ab8505(ab8500)) { + /* Configure AB8540 */ + if (is_ab8540(ab8500)) { + ab8500->mask_size = AB8540_NUM_IRQ_REGS; + ab8500->irq_reg_offset = ab8540_irq_regoffset; + ab8500->it_latchhier_num = AB8540_IT_LATCHHIER_NUM; + }/* Configure AB8500 or AB9540 IRQ */ + else if (is_ab9540(ab8500) || is_ab8505(ab8500)) { ab8500->mask_size = AB9540_NUM_IRQ_REGS; ab8500->irq_reg_offset = ab9540_irq_regoffset; + ab8500->it_latchhier_num = AB8500_IT_LATCHHIER_NUM; } else { ab8500->mask_size = AB8500_NUM_IRQ_REGS; ab8500->irq_reg_offset = ab8500_irq_regoffset; + ab8500->it_latchhier_num = AB8500_IT_LATCHHIER_NUM; } ab8500->mask = devm_kzalloc(&pdev->dev, ab8500->mask_size, GFP_KERNEL); if (!ab8500->mask) @@ -1396,10 +1642,36 @@ static int ab8500_probe(struct platform_device *pdev) } else { printk(KERN_CONT " None\n"); } + ret = get_register_interruptible(ab8500, AB8500_SYS_CTRL1_BLOCK, + AB8500_TURN_ON_STATUS, &value); + if (ret < 0) + return ret; + dev_info(ab8500->dev, "turn on reason(s) (%#x): ", value); + + if (value) { + for (i = 0; i < ARRAY_SIZE(turn_on_status); i++) { + if (value & 1) + printk("\"%s\" ", turn_on_status[i]); + value = value >> 1; + } + printk("\n"); + } else { + printk("None\n"); + } if (plat && plat->init) plat->init(ab8500); + if (is_ab9540(ab8500)) { + ret = get_register_interruptible(ab8500, AB8500_CHARGER, + AB8500_CH_USBCH_STAT1_REG, &value); + if (ret < 0) + return ret; + if ((value & VBUS_DET_DBNC1) && (value & VBUS_DET_DBNC100)) + ab8500_override_turn_on_stat(~AB8500_POW_KEY_1_ON, + AB8500_VBUS_DET); + } + /* Clear and mask all interrupts */ for (i = 0; i < ab8500->mask_size; i++) { /* @@ -1410,6 +1682,9 @@ static int ab8500_probe(struct platform_device *pdev) is_ab8500_1p1_or_earlier(ab8500)) continue; + if (ab8500->irq_reg_offset[i] < 0) + continue; + get_register_interruptible(ab8500, AB8500_INTERRUPT, AB8500_IT_LATCH1_REG + ab8500->irq_reg_offset[i], &value); @@ -1428,26 +1703,10 @@ static int ab8500_probe(struct platform_device *pdev) if (ret) return ret; - /* Activate this feature only in ab9540 */ - /* till tests are done on ab8500 1p2 or later*/ - if (is_ab9540(ab8500)) { - ret = devm_request_threaded_irq(&pdev->dev, ab8500->irq, NULL, - ab8500_hierarchical_irq, - IRQF_ONESHOT | IRQF_NO_SUSPEND, - "ab8500", ab8500); - } - else { - ret = devm_request_threaded_irq(&pdev->dev, ab8500->irq, NULL, - ab8500_irq, - IRQF_ONESHOT | IRQF_NO_SUSPEND, - "ab8500", ab8500); - if (ret) - return ret; - } - - ret = mfd_add_devices(ab8500->dev, 0, abx500_common_devs, - ARRAY_SIZE(abx500_common_devs), NULL, - ab8500->irq_base, ab8500->domain); + ret = devm_request_threaded_irq(&pdev->dev, ab8500->irq, NULL, + ab8500_hierarchical_irq, + IRQF_ONESHOT | IRQF_NO_SUSPEND, + "ab8500", ab8500); if (ret) return ret; @@ -1455,6 +1714,14 @@ static int ab8500_probe(struct platform_device *pdev) ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs, ARRAY_SIZE(ab9540_devs), NULL, ab8500->irq_base, ab8500->domain); + else if (is_ab8540(ab8500)) + ret = mfd_add_devices(ab8500->dev, 0, ab8540_devs, + ARRAY_SIZE(ab8540_devs), NULL, + ab8500->irq_base, ab8500->domain); + else if (is_ab8505(ab8500)) + ret = mfd_add_devices(ab8500->dev, 0, ab8505_devs, + ARRAY_SIZE(ab8505_devs), NULL, + ab8500->irq_base, ab8500->domain); else ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs, ARRAY_SIZE(ab8500_devs), NULL, @@ -1462,13 +1729,6 @@ static int ab8500_probe(struct platform_device *pdev) if (ret) return ret; - if (is_ab9540(ab8500) || is_ab8505(ab8500)) - ret = mfd_add_devices(ab8500->dev, 0, ab9540_ab8505_devs, - ARRAY_SIZE(ab9540_ab8505_devs), NULL, - ab8500->irq_base, ab8500->domain); - if (ret) - return ret; - if (!no_bm) { /* Add battery management devices */ ret = mfd_add_devices(ab8500->dev, 0, ab8500_bm_devs, @@ -1478,12 +1738,19 @@ static int ab8500_probe(struct platform_device *pdev) dev_err(ab8500->dev, "error adding bm devices\n"); } - if (is_ab9540(ab8500)) + if (((is_ab8505(ab8500) || is_ab9540(ab8500)) && + ab8500->chip_id >= AB8500_CUT2P0) || is_ab8540(ab8500)) ret = sysfs_create_group(&ab8500->dev->kobj, &ab9540_attr_group); else ret = sysfs_create_group(&ab8500->dev->kobj, &ab8500_attr_group); + + if ((is_ab8505(ab8500) || is_ab9540(ab8500)) && + ab8500->chip_id >= AB8500_CUT2P0) + ret = sysfs_create_group(&ab8500->dev->kobj, + &ab8505_attr_group); + if (ret) dev_err(ab8500->dev, "error creating sysfs entries\n"); @@ -1494,11 +1761,16 @@ static int ab8500_remove(struct platform_device *pdev) { struct ab8500 *ab8500 = platform_get_drvdata(pdev); - if (is_ab9540(ab8500)) + if (((is_ab8505(ab8500) || is_ab9540(ab8500)) && + ab8500->chip_id >= AB8500_CUT2P0) || is_ab8540(ab8500)) sysfs_remove_group(&ab8500->dev->kobj, &ab9540_attr_group); else sysfs_remove_group(&ab8500->dev->kobj, &ab8500_attr_group); + if ((is_ab8505(ab8500) || is_ab9540(ab8500)) && + ab8500->chip_id >= AB8500_CUT2P0) + sysfs_remove_group(&ab8500->dev->kobj, &ab8505_attr_group); + mfd_remove_devices(ab8500->dev); return 0; diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index 45fe3c50eb0..b88bbbc15f1 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -80,6 +80,7 @@ #include <linux/interrupt.h> #include <linux/kobject.h> #include <linux/slab.h> +#include <linux/irq.h> #include <linux/mfd/abx500.h> #include <linux/mfd/abx500/ab8500.h> @@ -90,6 +91,9 @@ #include <linux/ctype.h> #endif +/* TODO: this file should not reference IRQ_DB8500_AB8500! */ +#include <mach/irqs.h> + static u32 debug_bank; static u32 debug_address; @@ -101,6 +105,11 @@ static int num_irqs; static struct device_attribute **dev_attr; static char **event_name; +static u8 avg_sample = SAMPLE_16; +static u8 trig_edge = RISING_EDGE; +static u8 conv_type = ADC_SW; +static u8 trig_timer; + /** * struct ab8500_reg_range * @first: the first address of the range @@ -150,7 +159,9 @@ static struct hwreg_cfg hwreg_cfg = { #define AB8500_REV_REG 0x80 -static struct ab8500_prcmu_ranges debug_ranges[AB8500_NUM_BANKS] = { +static struct ab8500_prcmu_ranges *debug_ranges; + +struct ab8500_prcmu_ranges ab8500_debug_ranges[AB8500_NUM_BANKS] = { [0x0] = { .num_ranges = 0, .range = NULL, @@ -354,7 +365,7 @@ static struct ab8500_prcmu_ranges debug_ranges[AB8500_NUM_BANKS] = { }, { .first = 0xf5, - .last = 0xf6, + .last = 0xf6, }, }, }, @@ -479,6 +490,781 @@ static struct ab8500_prcmu_ranges debug_ranges[AB8500_NUM_BANKS] = { }, }; +struct ab8500_prcmu_ranges ab8505_debug_ranges[AB8500_NUM_BANKS] = { + [0x0] = { + .num_ranges = 0, + .range = NULL, + }, + [AB8500_SYS_CTRL1_BLOCK] = { + .num_ranges = 5, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x04, + }, + { + .first = 0x42, + .last = 0x42, + }, + { + .first = 0x52, + .last = 0x52, + }, + { + .first = 0x54, + .last = 0x57, + }, + { + .first = 0x80, + .last = 0x83, + }, + }, + }, + [AB8500_SYS_CTRL2_BLOCK] = { + .num_ranges = 5, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x0D, + }, + { + .first = 0x0F, + .last = 0x17, + }, + { + .first = 0x20, + .last = 0x20, + }, + { + .first = 0x30, + .last = 0x30, + }, + { + .first = 0x32, + .last = 0x3A, + }, + }, + }, + [AB8500_REGU_CTRL1] = { + .num_ranges = 3, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x00, + }, + { + .first = 0x03, + .last = 0x11, + }, + { + .first = 0x80, + .last = 0x86, + }, + }, + }, + [AB8500_REGU_CTRL2] = { + .num_ranges = 6, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x06, + }, + { + .first = 0x08, + .last = 0x15, + }, + { + .first = 0x17, + .last = 0x19, + }, + { + .first = 0x1B, + .last = 0x1D, + }, + { + .first = 0x1F, + .last = 0x30, + }, + { + .first = 0x40, + .last = 0x48, + }, + /* 0x80-0x8B is SIM registers and should + * not be accessed from here */ + }, + }, + [AB8500_USB] = { + .num_ranges = 3, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x80, + .last = 0x83, + }, + { + .first = 0x87, + .last = 0x8A, + }, + { + .first = 0x91, + .last = 0x94, + }, + }, + }, + [AB8500_TVOUT] = { + .num_ranges = 0, + .range = NULL, + }, + [AB8500_DBI] = { + .num_ranges = 0, + .range = NULL, + }, + [AB8500_ECI_AV_ACC] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x80, + .last = 0x82, + }, + }, + }, + [AB8500_RESERVED] = { + .num_ranges = 0, + .range = NULL, + }, + [AB8500_GPADC] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x08, + }, + }, + }, + [AB8500_CHARGER] = { + .num_ranges = 9, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x02, + .last = 0x03, + }, + { + .first = 0x05, + .last = 0x05, + }, + { + .first = 0x40, + .last = 0x44, + }, + { + .first = 0x50, + .last = 0x57, + }, + { + .first = 0x60, + .last = 0x60, + }, + { + .first = 0xA0, + .last = 0xA7, + }, + { + .first = 0xAF, + .last = 0xB2, + }, + { + .first = 0xC0, + .last = 0xC2, + }, + { + .first = 0xF5, + .last = 0xF5, + }, + }, + }, + [AB8500_GAS_GAUGE] = { + .num_ranges = 3, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x00, + }, + { + .first = 0x07, + .last = 0x0A, + }, + { + .first = 0x10, + .last = 0x14, + }, + }, + }, + [AB8500_AUDIO] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x83, + }, + }, + }, + [AB8500_INTERRUPT] = { + .num_ranges = 11, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x04, + }, + { + .first = 0x06, + .last = 0x07, + }, + { + .first = 0x09, + .last = 0x09, + }, + { + .first = 0x0B, + .last = 0x0C, + }, + { + .first = 0x12, + .last = 0x15, + }, + { + .first = 0x18, + .last = 0x18, + }, + /* Latch registers should not be read here */ + { + .first = 0x40, + .last = 0x44, + }, + { + .first = 0x46, + .last = 0x49, + }, + { + .first = 0x4B, + .last = 0x4D, + }, + { + .first = 0x52, + .last = 0x55, + }, + { + .first = 0x58, + .last = 0x58, + }, + /* LatchHier registers should not be read here */ + }, + }, + [AB8500_RTC] = { + .num_ranges = 2, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x14, + }, + { + .first = 0x16, + .last = 0x17, + }, + }, + }, + [AB8500_MISC] = { + .num_ranges = 8, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x06, + }, + { + .first = 0x10, + .last = 0x16, + }, + { + .first = 0x20, + .last = 0x26, + }, + { + .first = 0x30, + .last = 0x36, + }, + { + .first = 0x40, + .last = 0x46, + }, + { + .first = 0x50, + .last = 0x50, + }, + { + .first = 0x60, + .last = 0x6B, + }, + { + .first = 0x80, + .last = 0x82, + }, + }, + }, + [AB8500_DEVELOPMENT] = { + .num_ranges = 2, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x00, + }, + { + .first = 0x05, + .last = 0x05, + }, + }, + }, + [AB8500_DEBUG] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x05, + .last = 0x07, + }, + }, + }, + [AB8500_PROD_TEST] = { + .num_ranges = 0, + .range = NULL, + }, + [AB8500_STE_TEST] = { + .num_ranges = 0, + .range = NULL, + }, + [AB8500_OTP_EMUL] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x01, + .last = 0x15, + }, + }, + }, +}; + +struct ab8500_prcmu_ranges ab8540_debug_ranges[AB8500_NUM_BANKS] = { + [AB8500_M_FSM_RANK] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x0B, + }, + }, + }, + [AB8500_SYS_CTRL1_BLOCK] = { + .num_ranges = 6, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x04, + }, + { + .first = 0x42, + .last = 0x42, + }, + { + .first = 0x50, + .last = 0x54, + }, + { + .first = 0x57, + .last = 0x57, + }, + { + .first = 0x80, + .last = 0x83, + }, + { + .first = 0x90, + .last = 0x90, + }, + }, + }, + [AB8500_SYS_CTRL2_BLOCK] = { + .num_ranges = 5, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x0D, + }, + { + .first = 0x0F, + .last = 0x10, + }, + { + .first = 0x20, + .last = 0x21, + }, + { + .first = 0x32, + .last = 0x3C, + }, + { + .first = 0x40, + .last = 0x42, + }, + }, + }, + [AB8500_REGU_CTRL1] = { + .num_ranges = 4, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x03, + .last = 0x15, + }, + { + .first = 0x20, + .last = 0x20, + }, + { + .first = 0x80, + .last = 0x85, + }, + { + .first = 0x87, + .last = 0x88, + }, + }, + }, + [AB8500_REGU_CTRL2] = { + .num_ranges = 8, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x06, + }, + { + .first = 0x08, + .last = 0x15, + }, + { + .first = 0x17, + .last = 0x19, + }, + { + .first = 0x1B, + .last = 0x1D, + }, + { + .first = 0x1F, + .last = 0x2F, + }, + { + .first = 0x31, + .last = 0x3A, + }, + { + .first = 0x43, + .last = 0x44, + }, + { + .first = 0x48, + .last = 0x49, + }, + }, + }, + [AB8500_USB] = { + .num_ranges = 3, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x80, + .last = 0x83, + }, + { + .first = 0x87, + .last = 0x8A, + }, + { + .first = 0x91, + .last = 0x94, + }, + }, + }, + [AB8500_TVOUT] = { + .num_ranges = 0, + .range = NULL + }, + [AB8500_DBI] = { + .num_ranges = 4, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x07, + }, + { + .first = 0x10, + .last = 0x11, + }, + { + .first = 0x20, + .last = 0x21, + }, + { + .first = 0x30, + .last = 0x43, + }, + }, + }, + [AB8500_ECI_AV_ACC] = { + .num_ranges = 2, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x03, + }, + { + .first = 0x80, + .last = 0x82, + }, + }, + }, + [AB8500_RESERVED] = { + .num_ranges = 0, + .range = NULL, + }, + [AB8500_GPADC] = { + .num_ranges = 4, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x01, + }, + { + .first = 0x04, + .last = 0x06, + }, + { + .first = 0x09, + .last = 0x0A, + }, + { + .first = 0x10, + .last = 0x14, + }, + }, + }, + [AB8500_CHARGER] = { + .num_ranges = 10, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x00, + }, + { + .first = 0x02, + .last = 0x05, + }, + { + .first = 0x40, + .last = 0x44, + }, + { + .first = 0x50, + .last = 0x57, + }, + { + .first = 0x60, + .last = 0x60, + }, + { + .first = 0x70, + .last = 0x70, + }, + { + .first = 0xA0, + .last = 0xA9, + }, + { + .first = 0xAF, + .last = 0xB2, + }, + { + .first = 0xC0, + .last = 0xC6, + }, + { + .first = 0xF5, + .last = 0xF5, + }, + }, + }, + [AB8500_GAS_GAUGE] = { + .num_ranges = 3, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x00, + }, + { + .first = 0x07, + .last = 0x0A, + }, + { + .first = 0x10, + .last = 0x14, + }, + }, + }, + [AB8500_AUDIO] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x9f, + }, + }, + }, + [AB8500_INTERRUPT] = { + .num_ranges = 6, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x05, + }, + { + .first = 0x0B, + .last = 0x0D, + }, + { + .first = 0x12, + .last = 0x20, + }, + /* Latch registers should not be read here */ + { + .first = 0x40, + .last = 0x45, + }, + { + .first = 0x4B, + .last = 0x4D, + }, + { + .first = 0x52, + .last = 0x60, + }, + /* LatchHier registers should not be read here */ + }, + }, + [AB8500_RTC] = { + .num_ranges = 3, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x07, + }, + { + .first = 0x0B, + .last = 0x18, + }, + { + .first = 0x20, + .last = 0x25, + }, + }, + }, + [AB8500_MISC] = { + .num_ranges = 9, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x06, + }, + { + .first = 0x10, + .last = 0x16, + }, + { + .first = 0x20, + .last = 0x26, + }, + { + .first = 0x30, + .last = 0x36, + }, + { + .first = 0x40, + .last = 0x49, + }, + { + .first = 0x50, + .last = 0x50, + }, + { + .first = 0x60, + .last = 0x6B, + }, + { + .first = 0x70, + .last = 0x74, + }, + { + .first = 0x80, + .last = 0x82, + }, + }, + }, + [AB8500_DEVELOPMENT] = { + .num_ranges = 3, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x01, + }, + { + .first = 0x06, + .last = 0x06, + }, + { + .first = 0x10, + .last = 0x21, + }, + }, + }, + [AB8500_DEBUG] = { + .num_ranges = 3, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x01, + .last = 0x0C, + }, + { + .first = 0x0E, + .last = 0x11, + }, + { + .first = 0x80, + .last = 0x81, + }, + }, + }, + [AB8500_PROD_TEST] = { + .num_ranges = 0, + .range = NULL, + }, + [AB8500_STE_TEST] = { + .num_ranges = 0, + .range = NULL, + }, + [AB8500_OTP_EMUL] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x3F, + }, + }, + }, +}; + + static irqreturn_t ab8500_debug_handler(int irq, void *data) { char buf[16]; @@ -520,19 +1306,16 @@ static int ab8500_registers_print(struct device *dev, u32 bank, } if (s) { - err = seq_printf(s, " [%u/0x%02X]: 0x%02X\n", + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", bank, reg, value); if (err < 0) { - dev_err(dev, - "seq_printf overflow bank=%d reg=%d\n", - bank, reg); /* Error is not returned here since * the output is wanted in any case */ return 0; } } else { - printk(KERN_INFO" [%u/0x%02X]: 0x%02X\n", bank, - reg, value); + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", + bank, reg, value); } } } @@ -546,7 +1329,7 @@ static int ab8500_print_bank_registers(struct seq_file *s, void *p) seq_printf(s, AB8500_NAME_STRING " register values:\n"); - seq_printf(s, " bank %u:\n", bank); + seq_printf(s, " bank 0x%02X:\n", bank); ab8500_registers_print(dev, bank, s); return 0; @@ -573,10 +1356,8 @@ static int ab8500_print_all_banks(struct seq_file *s, void *p) seq_printf(s, AB8500_NAME_STRING " register values:\n"); - for (i = 1; i < AB8500_NUM_BANKS; i++) { - err = seq_printf(s, " bank %u:\n", i); - if (err < 0) - dev_err(dev, "seq_printf overflow, bank=%d\n", i); + for (i = 0; i < AB8500_NUM_BANKS; i++) { + err = seq_printf(s, " bank 0x%02X:\n", i); ab8500_registers_print(dev, i, s); } @@ -591,11 +1372,68 @@ void ab8500_dump_all_banks(struct device *dev) printk(KERN_INFO"ab8500 register values:\n"); for (i = 1; i < AB8500_NUM_BANKS; i++) { - printk(KERN_INFO" bank %u:\n", i); + printk(KERN_INFO" bank 0x%02X:\n", i); ab8500_registers_print(dev, i, NULL); } } +/* Space for 500 registers. */ +#define DUMP_MAX_REGS 700 +struct ab8500_register_dump +{ + u8 bank; + u8 reg; + u8 value; +} ab8500_complete_register_dump[DUMP_MAX_REGS]; + +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); + +/* This shall only be called upon kernel panic! */ +void ab8500_dump_all_banks_to_mem(void) +{ + int i, r = 0; + u8 bank; + int err = 0; + + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); + + for (bank = 0; bank < AB8500_NUM_BANKS; bank++) { + for (i = 0; i < debug_ranges[bank].num_ranges; i++) { + u8 reg; + + for (reg = debug_ranges[bank].range[i].first; + reg <= debug_ranges[bank].range[i].last; + reg++) { + u8 value; + + err = prcmu_abb_read(bank, reg, &value, 1); + + if (err < 0) + goto out; + + ab8500_complete_register_dump[r].bank = bank; + ab8500_complete_register_dump[r].reg = reg; + ab8500_complete_register_dump[r].value = value; + + r++; + + if (r >= DUMP_MAX_REGS) { + pr_err("%s: too many register to dump!\n", + __func__); + err = -EINVAL; + goto out; + } + } + } + } +out: + if (err >= 0) + pr_info("Saved all ABB registers.\n"); + else + pr_info("Failed to save all ABB registers.\n"); +} + static int ab8500_all_banks_open(struct inode *inode, struct file *file) { struct seq_file *s; @@ -625,7 +1463,7 @@ static const struct file_operations ab8500_all_banks_fops = { static int ab8500_bank_print(struct seq_file *s, void *p) { - return seq_printf(s, "%d\n", debug_bank); + return seq_printf(s, "0x%02X\n", debug_bank); } static int ab8500_bank_open(struct inode *inode, struct file *file) @@ -641,7 +1479,6 @@ static ssize_t ab8500_bank_write(struct file *file, unsigned long user_bank; int err; - /* Get userspace string and assure termination */ err = kstrtoul_from_user(user_buf, count, 0, &user_bank); if (err) return err; @@ -667,14 +1504,13 @@ static int ab8500_address_open(struct inode *inode, struct file *file) } static ssize_t ab8500_address_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) + const char __user *user_buf, + size_t count, loff_t *ppos) { struct device *dev = ((struct seq_file *)(file->private_data))->private; unsigned long user_address; int err; - /* Get userspace string and assure termination */ err = kstrtoul_from_user(user_buf, count, 0, &user_address); if (err) return err; @@ -684,6 +1520,7 @@ static ssize_t ab8500_address_write(struct file *file, return -EINVAL; } debug_address = user_address; + return count; } @@ -711,14 +1548,13 @@ static int ab8500_val_open(struct inode *inode, struct file *file) } static ssize_t ab8500_val_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) + const char __user *user_buf, + size_t count, loff_t *ppos) { struct device *dev = ((struct seq_file *)(file->private_data))->private; unsigned long user_val; int err; - /* Get userspace string and assure termination */ err = kstrtoul_from_user(user_buf, count, 0, &user_val); if (err) return err; @@ -741,22 +1577,46 @@ static ssize_t ab8500_val_write(struct file *file, * Interrupt status */ static u32 num_interrupts[AB8500_MAX_NR_IRQS]; +static u32 num_wake_interrupts[AB8500_MAX_NR_IRQS]; static int num_interrupt_lines; +bool __attribute__((weak)) suspend_test_wake_cause_interrupt_is_mine(u32 my_int) +{ + return false; +} + void ab8500_debug_register_interrupt(int line) { - if (line < num_interrupt_lines) + if (line < num_interrupt_lines) { num_interrupts[line]++; + if (suspend_test_wake_cause_interrupt_is_mine(IRQ_DB8500_AB8500)) + num_wake_interrupts[line]++; + } } static int ab8500_interrupts_print(struct seq_file *s, void *p) { int line; - seq_printf(s, "irq: number of\n"); + seq_printf(s, "name: number: number of: wake:\n"); - for (line = 0; line < num_interrupt_lines; line++) - seq_printf(s, "%3i: %6i\n", line, num_interrupts[line]); + for (line = 0; line < num_interrupt_lines; line++) { + struct irq_desc *desc = irq_to_desc(line + irq_first); + struct irqaction *action = desc->action; + + seq_printf(s, "%3i: %6i %4i", line, + num_interrupts[line], + num_wake_interrupts[line]); + + if (desc && desc->name) + seq_printf(s, "-%-8s", desc->name); + if (action) { + seq_printf(s, " %s", action->name); + while ((action = action->next) != NULL) + seq_printf(s, ", %s", action->name); + } + seq_putc(s, '\n'); + } return 0; } @@ -801,6 +1661,79 @@ static int ab8500_hwreg_open(struct inode *inode, struct file *file) return single_open(file, ab8500_hwreg_print, inode->i_private); } +#define AB8500_SUPPLY_CONTROL_CONFIG_1 0x01 +#define AB8500_SUPPLY_CONTROL_REG 0x00 +#define AB8500_FIRST_SIM_REG 0x80 +#define AB8500_LAST_SIM_REG 0x8B +#define AB8505_LAST_SIM_REG 0x8C + +static int ab8500_print_modem_registers(struct seq_file *s, void *p) +{ + struct device *dev = s->private; + struct ab8500 *ab8500; + int err; + u8 value; + u8 orig_value; + u32 bank = AB8500_REGU_CTRL2; + u32 last_sim_reg = AB8500_LAST_SIM_REG; + u32 reg; + + ab8500 = dev_get_drvdata(dev->parent); + dev_warn(dev, "WARNING! This operation can interfer with modem side\n" + "and should only be done with care\n"); + + err = abx500_get_register_interruptible(dev, + AB8500_REGU_CTRL1, AB8500_SUPPLY_CONTROL_REG, &orig_value); + if (err < 0) { + dev_err(dev, "ab->read fail %d\n", err); + return err; + } + /* Config 1 will allow APE side to read SIM registers */ + err = abx500_set_register_interruptible(dev, + AB8500_REGU_CTRL1, AB8500_SUPPLY_CONTROL_REG, + AB8500_SUPPLY_CONTROL_CONFIG_1); + if (err < 0) { + dev_err(dev, "ab->write fail %d\n", err); + return err; + } + + seq_printf(s, " bank 0x%02X:\n", bank); + + if (is_ab9540(ab8500) || is_ab8505(ab8500)) + last_sim_reg = AB8505_LAST_SIM_REG; + + for (reg = AB8500_FIRST_SIM_REG; reg <= last_sim_reg; reg++) { + err = abx500_get_register_interruptible(dev, + bank, reg, &value); + if (err < 0) { + dev_err(dev, "ab->read fail %d\n", err); + return err; + } + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", + bank, reg, value); + } + err = abx500_set_register_interruptible(dev, + AB8500_REGU_CTRL1, AB8500_SUPPLY_CONTROL_REG, orig_value); + if (err < 0) { + dev_err(dev, "ab->write fail %d\n", err); + return err; + } + return 0; +} + +static int ab8500_modem_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8500_print_modem_registers, inode->i_private); +} + +static const struct file_operations ab8500_modem_fops = { + .open = ab8500_modem_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + static int ab8500_gpadc_bat_ctrl_print(struct seq_file *s, void *p) { int bat_ctrl_raw; @@ -808,12 +1741,13 @@ static int ab8500_gpadc_bat_ctrl_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - bat_ctrl_raw = ab8500_gpadc_read_raw(gpadc, BAT_CTRL); + bat_ctrl_raw = ab8500_gpadc_read_raw(gpadc, BAT_CTRL, + avg_sample, trig_edge, trig_timer, conv_type); bat_ctrl_convert = ab8500_gpadc_ad_to_voltage(gpadc, - BAT_CTRL, bat_ctrl_raw); + BAT_CTRL, bat_ctrl_raw); return seq_printf(s, "%d,0x%X\n", - bat_ctrl_convert, bat_ctrl_raw); + bat_ctrl_convert, bat_ctrl_raw); } static int ab8500_gpadc_bat_ctrl_open(struct inode *inode, struct file *file) @@ -836,16 +1770,17 @@ static int ab8500_gpadc_btemp_ball_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - btemp_ball_raw = ab8500_gpadc_read_raw(gpadc, BTEMP_BALL); + btemp_ball_raw = ab8500_gpadc_read_raw(gpadc, BTEMP_BALL, + avg_sample, trig_edge, trig_timer, conv_type); btemp_ball_convert = ab8500_gpadc_ad_to_voltage(gpadc, BTEMP_BALL, - btemp_ball_raw); + btemp_ball_raw); return seq_printf(s, - "%d,0x%X\n", btemp_ball_convert, btemp_ball_raw); + "%d,0x%X\n", btemp_ball_convert, btemp_ball_raw); } static int ab8500_gpadc_btemp_ball_open(struct inode *inode, - struct file *file) + struct file *file) { return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); } @@ -865,19 +1800,20 @@ static int ab8500_gpadc_main_charger_v_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - main_charger_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_V); + main_charger_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_V, + avg_sample, trig_edge, trig_timer, conv_type); main_charger_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, - MAIN_CHARGER_V, main_charger_v_raw); + MAIN_CHARGER_V, main_charger_v_raw); return seq_printf(s, "%d,0x%X\n", main_charger_v_convert, main_charger_v_raw); } static int ab8500_gpadc_main_charger_v_open(struct inode *inode, - struct file *file) + struct file *file) { return single_open(file, ab8500_gpadc_main_charger_v_print, - inode->i_private); + inode->i_private); } static const struct file_operations ab8500_gpadc_main_charger_v_fops = { @@ -895,19 +1831,20 @@ static int ab8500_gpadc_acc_detect1_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - acc_detect1_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT1); + acc_detect1_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT1, + avg_sample, trig_edge, trig_timer, conv_type); acc_detect1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ACC_DETECT1, - acc_detect1_raw); + acc_detect1_raw); return seq_printf(s, "%d,0x%X\n", - acc_detect1_convert, acc_detect1_raw); + acc_detect1_convert, acc_detect1_raw); } static int ab8500_gpadc_acc_detect1_open(struct inode *inode, - struct file *file) + struct file *file) { return single_open(file, ab8500_gpadc_acc_detect1_print, - inode->i_private); + inode->i_private); } static const struct file_operations ab8500_gpadc_acc_detect1_fops = { @@ -925,19 +1862,20 @@ static int ab8500_gpadc_acc_detect2_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - acc_detect2_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT2); + acc_detect2_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT2, + avg_sample, trig_edge, trig_timer, conv_type); acc_detect2_convert = ab8500_gpadc_ad_to_voltage(gpadc, - ACC_DETECT2, acc_detect2_raw); + ACC_DETECT2, acc_detect2_raw); return seq_printf(s, "%d,0x%X\n", - acc_detect2_convert, acc_detect2_raw); + acc_detect2_convert, acc_detect2_raw); } static int ab8500_gpadc_acc_detect2_open(struct inode *inode, struct file *file) { return single_open(file, ab8500_gpadc_acc_detect2_print, - inode->i_private); + inode->i_private); } static const struct file_operations ab8500_gpadc_acc_detect2_fops = { @@ -955,12 +1893,13 @@ static int ab8500_gpadc_aux1_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - aux1_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX1); + aux1_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX1, + avg_sample, trig_edge, trig_timer, conv_type); aux1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX1, - aux1_raw); + aux1_raw); return seq_printf(s, "%d,0x%X\n", - aux1_convert, aux1_raw); + aux1_convert, aux1_raw); } static int ab8500_gpadc_aux1_open(struct inode *inode, struct file *file) @@ -983,9 +1922,10 @@ static int ab8500_gpadc_aux2_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - aux2_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX2); + aux2_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX2, + avg_sample, trig_edge, trig_timer, conv_type); aux2_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX2, - aux2_raw); + aux2_raw); return seq_printf(s, "%d,0x%X\n", aux2_convert, aux2_raw); @@ -1011,16 +1951,17 @@ static int ab8500_gpadc_main_bat_v_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - main_bat_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_BAT_V); + main_bat_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_BAT_V, + avg_sample, trig_edge, trig_timer, conv_type); main_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, MAIN_BAT_V, - main_bat_v_raw); + main_bat_v_raw); return seq_printf(s, "%d,0x%X\n", - main_bat_v_convert, main_bat_v_raw); + main_bat_v_convert, main_bat_v_raw); } static int ab8500_gpadc_main_bat_v_open(struct inode *inode, - struct file *file) + struct file *file) { return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); } @@ -1040,12 +1981,13 @@ static int ab8500_gpadc_vbus_v_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - vbus_v_raw = ab8500_gpadc_read_raw(gpadc, VBUS_V); + vbus_v_raw = ab8500_gpadc_read_raw(gpadc, VBUS_V, + avg_sample, trig_edge, trig_timer, conv_type); vbus_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBUS_V, - vbus_v_raw); + vbus_v_raw); return seq_printf(s, "%d,0x%X\n", - vbus_v_convert, vbus_v_raw); + vbus_v_convert, vbus_v_raw); } static int ab8500_gpadc_vbus_v_open(struct inode *inode, struct file *file) @@ -1068,19 +2010,20 @@ static int ab8500_gpadc_main_charger_c_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - main_charger_c_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_C); + main_charger_c_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_C, + avg_sample, trig_edge, trig_timer, conv_type); main_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc, - MAIN_CHARGER_C, main_charger_c_raw); + MAIN_CHARGER_C, main_charger_c_raw); return seq_printf(s, "%d,0x%X\n", - main_charger_c_convert, main_charger_c_raw); + main_charger_c_convert, main_charger_c_raw); } static int ab8500_gpadc_main_charger_c_open(struct inode *inode, struct file *file) { return single_open(file, ab8500_gpadc_main_charger_c_print, - inode->i_private); + inode->i_private); } static const struct file_operations ab8500_gpadc_main_charger_c_fops = { @@ -1098,19 +2041,20 @@ static int ab8500_gpadc_usb_charger_c_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - usb_charger_c_raw = ab8500_gpadc_read_raw(gpadc, USB_CHARGER_C); + usb_charger_c_raw = ab8500_gpadc_read_raw(gpadc, USB_CHARGER_C, + avg_sample, trig_edge, trig_timer, conv_type); usb_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc, - USB_CHARGER_C, usb_charger_c_raw); + USB_CHARGER_C, usb_charger_c_raw); return seq_printf(s, "%d,0x%X\n", - usb_charger_c_convert, usb_charger_c_raw); + usb_charger_c_convert, usb_charger_c_raw); } static int ab8500_gpadc_usb_charger_c_open(struct inode *inode, struct file *file) { return single_open(file, ab8500_gpadc_usb_charger_c_print, - inode->i_private); + inode->i_private); } static const struct file_operations ab8500_gpadc_usb_charger_c_fops = { @@ -1128,12 +2072,13 @@ static int ab8500_gpadc_bk_bat_v_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - bk_bat_v_raw = ab8500_gpadc_read_raw(gpadc, BK_BAT_V); + bk_bat_v_raw = ab8500_gpadc_read_raw(gpadc, BK_BAT_V, + avg_sample, trig_edge, trig_timer, conv_type); bk_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, - BK_BAT_V, bk_bat_v_raw); + BK_BAT_V, bk_bat_v_raw); return seq_printf(s, "%d,0x%X\n", - bk_bat_v_convert, bk_bat_v_raw); + bk_bat_v_convert, bk_bat_v_raw); } static int ab8500_gpadc_bk_bat_v_open(struct inode *inode, struct file *file) @@ -1156,12 +2101,13 @@ static int ab8500_gpadc_die_temp_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - die_temp_raw = ab8500_gpadc_read_raw(gpadc, DIE_TEMP); + die_temp_raw = ab8500_gpadc_read_raw(gpadc, DIE_TEMP, + avg_sample, trig_edge, trig_timer, conv_type); die_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, DIE_TEMP, - die_temp_raw); + die_temp_raw); return seq_printf(s, "%d,0x%X\n", - die_temp_convert, die_temp_raw); + die_temp_convert, die_temp_raw); } static int ab8500_gpadc_die_temp_open(struct inode *inode, struct file *file) @@ -1177,6 +2123,453 @@ static const struct file_operations ab8500_gpadc_die_temp_fops = { .owner = THIS_MODULE, }; +static int ab8500_gpadc_usb_id_print(struct seq_file *s, void *p) +{ + int usb_id_raw; + int usb_id_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + usb_id_raw = ab8500_gpadc_read_raw(gpadc, USB_ID, + avg_sample, trig_edge, trig_timer, conv_type); + usb_id_convert = ab8500_gpadc_ad_to_voltage(gpadc, USB_ID, + usb_id_raw); + + return seq_printf(s, "%d,0x%X\n", + usb_id_convert, usb_id_raw); +} + +static int ab8500_gpadc_usb_id_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8500_gpadc_usb_id_print, inode->i_private); +} + +static const struct file_operations ab8500_gpadc_usb_id_fops = { + .open = ab8500_gpadc_usb_id_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8540_gpadc_xtal_temp_print(struct seq_file *s, void *p) +{ + int xtal_temp_raw; + int xtal_temp_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + xtal_temp_raw = ab8500_gpadc_read_raw(gpadc, XTAL_TEMP, + avg_sample, trig_edge, trig_timer, conv_type); + xtal_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, XTAL_TEMP, + xtal_temp_raw); + + return seq_printf(s, "%d,0x%X\n", + xtal_temp_convert, xtal_temp_raw); +} + +static int ab8540_gpadc_xtal_temp_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8540_gpadc_xtal_temp_print, + inode->i_private); +} + +static const struct file_operations ab8540_gpadc_xtal_temp_fops = { + .open = ab8540_gpadc_xtal_temp_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8540_gpadc_vbat_true_meas_print(struct seq_file *s, void *p) +{ + int vbat_true_meas_raw; + int vbat_true_meas_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + vbat_true_meas_raw = ab8500_gpadc_read_raw(gpadc, VBAT_TRUE_MEAS, + avg_sample, trig_edge, trig_timer, conv_type); + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, + vbat_true_meas_raw); + + return seq_printf(s, "%d,0x%X\n", + vbat_true_meas_convert, vbat_true_meas_raw); +} + +static int ab8540_gpadc_vbat_true_meas_open(struct inode *inode, + struct file *file) +{ + return single_open(file, ab8540_gpadc_vbat_true_meas_print, + inode->i_private); +} + +static const struct file_operations ab8540_gpadc_vbat_true_meas_fops = { + .open = ab8540_gpadc_vbat_true_meas_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8540_gpadc_bat_ctrl_and_ibat_print(struct seq_file *s, void *p) +{ + int bat_ctrl_raw; + int bat_ctrl_convert; + int ibat_raw; + int ibat_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + bat_ctrl_raw = ab8500_gpadc_double_read_raw(gpadc, BAT_CTRL_AND_IBAT, + avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw); + + bat_ctrl_convert = ab8500_gpadc_ad_to_voltage(gpadc, BAT_CTRL, + bat_ctrl_raw); + ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL, + ibat_raw); + + return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n", + bat_ctrl_convert, bat_ctrl_raw, + ibat_convert, ibat_raw); +} + +static int ab8540_gpadc_bat_ctrl_and_ibat_open(struct inode *inode, + struct file *file) +{ + return single_open(file, ab8540_gpadc_bat_ctrl_and_ibat_print, + inode->i_private); +} + +static const struct file_operations ab8540_gpadc_bat_ctrl_and_ibat_fops = { + .open = ab8540_gpadc_bat_ctrl_and_ibat_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8540_gpadc_vbat_meas_and_ibat_print(struct seq_file *s, void *p) +{ + int vbat_meas_raw; + int vbat_meas_convert; + int ibat_raw; + int ibat_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + vbat_meas_raw = ab8500_gpadc_double_read_raw(gpadc, VBAT_MEAS_AND_IBAT, + avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw); + vbat_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, MAIN_BAT_V, + vbat_meas_raw); + ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL, + ibat_raw); + + return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n", + vbat_meas_convert, vbat_meas_raw, + ibat_convert, ibat_raw); +} + +static int ab8540_gpadc_vbat_meas_and_ibat_open(struct inode *inode, + struct file *file) +{ + return single_open(file, ab8540_gpadc_vbat_meas_and_ibat_print, + inode->i_private); +} + +static const struct file_operations ab8540_gpadc_vbat_meas_and_ibat_fops = { + .open = ab8540_gpadc_vbat_meas_and_ibat_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) +{ + int vbat_true_meas_raw; + int vbat_true_meas_convert; + int ibat_raw; + int ibat_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + vbat_true_meas_raw = ab8500_gpadc_double_read_raw(gpadc, + VBAT_TRUE_MEAS_AND_IBAT, avg_sample, trig_edge, + trig_timer, conv_type, &ibat_raw); + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, + VBAT_TRUE_MEAS, vbat_true_meas_raw); + ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL, + ibat_raw); + + return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n", + vbat_true_meas_convert, vbat_true_meas_raw, + ibat_convert, ibat_raw); +} + +static int ab8540_gpadc_vbat_true_meas_and_ibat_open(struct inode *inode, + struct file *file) +{ + return single_open(file, ab8540_gpadc_vbat_true_meas_and_ibat_print, + inode->i_private); +} + +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { + .open = ab8540_gpadc_vbat_true_meas_and_ibat_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8540_gpadc_bat_temp_and_ibat_print(struct seq_file *s, void *p) +{ + int bat_temp_raw; + int bat_temp_convert; + int ibat_raw; + int ibat_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + bat_temp_raw = ab8500_gpadc_double_read_raw(gpadc, BAT_TEMP_AND_IBAT, + avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw); + bat_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, BTEMP_BALL, + bat_temp_raw); + ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL, + ibat_raw); + + return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n", + bat_temp_convert, bat_temp_raw, + ibat_convert, ibat_raw); +} + +static int ab8540_gpadc_bat_temp_and_ibat_open(struct inode *inode, + struct file *file) +{ + return single_open(file, ab8540_gpadc_bat_temp_and_ibat_print, + inode->i_private); +} + +static const struct file_operations ab8540_gpadc_bat_temp_and_ibat_fops = { + .open = ab8540_gpadc_bat_temp_and_ibat_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8540_gpadc_otp_cal_print(struct seq_file *s, void *p) +{ + struct ab8500_gpadc *gpadc; + u16 vmain_l, vmain_h, btemp_l, btemp_h; + u16 vbat_l, vbat_h, ibat_l, ibat_h; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + ab8540_gpadc_get_otp(gpadc, &vmain_l, &vmain_h, &btemp_l, &btemp_h, + &vbat_l, &vbat_h, &ibat_l, &ibat_h); + return seq_printf(s, "VMAIN_L:0x%X\n" + "VMAIN_H:0x%X\n" + "BTEMP_L:0x%X\n" + "BTEMP_H:0x%X\n" + "VBAT_L:0x%X\n" + "VBAT_H:0x%X\n" + "IBAT_L:0x%X\n" + "IBAT_H:0x%X\n", + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); +} + +static int ab8540_gpadc_otp_cal_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8540_gpadc_otp_cal_print, inode->i_private); +} + +static const struct file_operations ab8540_gpadc_otp_calib_fops = { + .open = ab8540_gpadc_otp_cal_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8500_gpadc_avg_sample_print(struct seq_file *s, void *p) +{ + return seq_printf(s, "%d\n", avg_sample); +} + +static int ab8500_gpadc_avg_sample_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8500_gpadc_avg_sample_print, + inode->i_private); +} + +static ssize_t ab8500_gpadc_avg_sample_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct device *dev = ((struct seq_file *)(file->private_data))->private; + unsigned long user_avg_sample; + int err; + + err = kstrtoul_from_user(user_buf, count, 0, &user_avg_sample); + if (err) + return err; + + if ((user_avg_sample == SAMPLE_1) || (user_avg_sample == SAMPLE_4) + || (user_avg_sample == SAMPLE_8) + || (user_avg_sample == SAMPLE_16)) { + avg_sample = (u8) user_avg_sample; + } else { + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); + return -EINVAL; + } + + return count; +} + +static const struct file_operations ab8500_gpadc_avg_sample_fops = { + .open = ab8500_gpadc_avg_sample_open, + .read = seq_read, + .write = ab8500_gpadc_avg_sample_write, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8500_gpadc_trig_edge_print(struct seq_file *s, void *p) +{ + return seq_printf(s, "%d\n", trig_edge); +} + +static int ab8500_gpadc_trig_edge_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8500_gpadc_trig_edge_print, + inode->i_private); +} + +static ssize_t ab8500_gpadc_trig_edge_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct device *dev = ((struct seq_file *)(file->private_data))->private; + unsigned long user_trig_edge; + int err; + + err = kstrtoul_from_user(user_buf, count, 0, &user_trig_edge); + if (err) + return err; + + if ((user_trig_edge == RISING_EDGE) + || (user_trig_edge == FALLING_EDGE)) { + trig_edge = (u8) user_trig_edge; + } else { + dev_err(dev, "Wrong input:\n" + "Enter 0. Rising edge\n" + "Enter 1. Falling edge\n"); + return -EINVAL; + } + + return count; +} + +static const struct file_operations ab8500_gpadc_trig_edge_fops = { + .open = ab8500_gpadc_trig_edge_open, + .read = seq_read, + .write = ab8500_gpadc_trig_edge_write, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8500_gpadc_trig_timer_print(struct seq_file *s, void *p) +{ + return seq_printf(s, "%d\n", trig_timer); +} + +static int ab8500_gpadc_trig_timer_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8500_gpadc_trig_timer_print, + inode->i_private); +} + +static ssize_t ab8500_gpadc_trig_timer_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct device *dev = ((struct seq_file *)(file->private_data))->private; + unsigned long user_trig_timer; + int err; + + err = kstrtoul_from_user(user_buf, count, 0, &user_trig_timer); + if (err) + return err; + + if ((user_trig_timer >= 0) && (user_trig_timer <= 255)) { + trig_timer = (u8) user_trig_timer; + } else { + dev_err(dev, "debugfs error input: " + "should be beetween 0 to 255\n"); + return -EINVAL; + } + + return count; +} + +static const struct file_operations ab8500_gpadc_trig_timer_fops = { + .open = ab8500_gpadc_trig_timer_open, + .read = seq_read, + .write = ab8500_gpadc_trig_timer_write, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8500_gpadc_conv_type_print(struct seq_file *s, void *p) +{ + return seq_printf(s, "%d\n", conv_type); +} + +static int ab8500_gpadc_conv_type_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8500_gpadc_conv_type_print, + inode->i_private); +} + +static ssize_t ab8500_gpadc_conv_type_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct device *dev = ((struct seq_file *)(file->private_data))->private; + unsigned long user_conv_type; + int err; + + err = kstrtoul_from_user(user_buf, count, 0, &user_conv_type); + if (err) + return err; + + if ((user_conv_type == ADC_SW) + || (user_conv_type == ADC_HW)) { + conv_type = (u8) user_conv_type; + } else { + dev_err(dev, "Wrong input:\n" + "Enter 0. ADC SW conversion\n" + "Enter 1. ADC HW conversion\n"); + return -EINVAL; + } + + return count; +} + +static const struct file_operations ab8500_gpadc_conv_type_fops = { + .open = ab8500_gpadc_conv_type_open, + .read = seq_read, + .write = ab8500_gpadc_conv_type_write, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + /* * return length of an ASCII numerical value, 0 is string is not a * numerical value. @@ -1352,7 +2745,7 @@ static int ab8500_subscribe_unsubscribe_open(struct inode *inode, struct file *file) { return single_open(file, ab8500_subscribe_unsubscribe_print, - inode->i_private); + inode->i_private); } /* @@ -1382,21 +2775,14 @@ static ssize_t ab8500_subscribe_write(struct file *file, size_t count, loff_t *ppos) { struct device *dev = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; unsigned long user_val; int err; unsigned int irq_index; - /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf)-1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_val); + err = kstrtoul_from_user(user_buf, count, 0, &user_val); if (err) - return -EINVAL; + return err; + if (user_val < irq_first) { dev_err(dev, "debugfs error input < %d\n", irq_first); return -EINVAL; @@ -1416,7 +2802,7 @@ static ssize_t ab8500_subscribe_write(struct file *file, */ dev_attr[irq_index] = kmalloc(sizeof(struct device_attribute), GFP_KERNEL); - event_name[irq_index] = kmalloc(buf_size, GFP_KERNEL); + event_name[irq_index] = kmalloc(count, GFP_KERNEL); sprintf(event_name[irq_index], "%lu", user_val); dev_attr[irq_index]->show = show_irq; dev_attr[irq_index]->store = NULL; @@ -1438,7 +2824,7 @@ static ssize_t ab8500_subscribe_write(struct file *file, return err; } - return buf_size; + return count; } static ssize_t ab8500_unsubscribe_write(struct file *file, @@ -1446,21 +2832,14 @@ static ssize_t ab8500_unsubscribe_write(struct file *file, size_t count, loff_t *ppos) { struct device *dev = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; unsigned long user_val; int err; unsigned int irq_index; - /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf)-1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_val); + err = kstrtoul_from_user(user_buf, count, 0, &user_val); if (err) - return -EINVAL; + return err; + if (user_val < irq_first) { dev_err(dev, "debugfs error input < %d\n", irq_first); return -EINVAL; @@ -1485,7 +2864,7 @@ static ssize_t ab8500_unsubscribe_write(struct file *file, kfree(event_name[irq_index]); kfree(dev_attr[irq_index]); - return buf_size; + return count; } /* @@ -1583,7 +2962,7 @@ static int ab8500_debug_probe(struct platform_device *plf) irq_first = platform_get_irq_byname(plf, "IRQ_FIRST"); if (irq_first < 0) { dev_err(&plf->dev, "First irq not found, err %d\n", - irq_first); + irq_first); ret = irq_first; goto out_freeevent_name; } @@ -1591,9 +2970,9 @@ static int ab8500_debug_probe(struct platform_device *plf) irq_last = platform_get_irq_byname(plf, "IRQ_LAST"); if (irq_last < 0) { dev_err(&plf->dev, "Last irq not found, err %d\n", - irq_last); + irq_last); ret = irq_last; - goto out_freeevent_name; + goto out_freeevent_name; } ab8500_dir = debugfs_create_dir(AB8500_NAME_STRING, NULL); @@ -1601,124 +2980,198 @@ static int ab8500_debug_probe(struct platform_device *plf) goto err; ab8500_gpadc_dir = debugfs_create_dir(AB8500_ADC_NAME_STRING, - ab8500_dir); + ab8500_dir); if (!ab8500_gpadc_dir) goto err; file = debugfs_create_file("all-bank-registers", S_IRUGO, - ab8500_dir, &plf->dev, &ab8500_registers_fops); + ab8500_dir, &plf->dev, &ab8500_registers_fops); if (!file) goto err; file = debugfs_create_file("all-banks", S_IRUGO, - ab8500_dir, &plf->dev, &ab8500_all_banks_fops); + ab8500_dir, &plf->dev, &ab8500_all_banks_fops); if (!file) goto err; - file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR), - ab8500_dir, &plf->dev, &ab8500_bank_fops); + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_dir, &plf->dev, &ab8500_bank_fops); if (!file) goto err; - file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR), - ab8500_dir, &plf->dev, &ab8500_address_fops); + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_dir, &plf->dev, &ab8500_address_fops); if (!file) goto err; - file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR), - ab8500_dir, &plf->dev, &ab8500_val_fops); + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_dir, &plf->dev, &ab8500_val_fops); if (!file) goto err; - file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR), - ab8500_dir, &plf->dev, &ab8500_subscribe_fops); + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_dir, &plf->dev, &ab8500_subscribe_fops); if (!file) goto err; - if (is_ab8500(ab8500)) + if (is_ab8500(ab8500)) { + debug_ranges = ab8500_debug_ranges; num_interrupt_lines = AB8500_NR_IRQS; - else if (is_ab8505(ab8500)) + } else if (is_ab8505(ab8500)) { + debug_ranges = ab8505_debug_ranges; num_interrupt_lines = AB8505_NR_IRQS; - else if (is_ab9540(ab8500)) + } else if (is_ab9540(ab8500)) { + debug_ranges = ab8505_debug_ranges; num_interrupt_lines = AB9540_NR_IRQS; + } else if (is_ab8540(ab8500)) { + debug_ranges = ab8540_debug_ranges; + num_interrupt_lines = AB8540_NR_IRQS; + } file = debugfs_create_file("interrupts", (S_IRUGO), - ab8500_dir, &plf->dev, &ab8500_interrupts_fops); + ab8500_dir, &plf->dev, &ab8500_interrupts_fops); if (!file) goto err; - file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR), - ab8500_dir, &plf->dev, &ab8500_unsubscribe_fops); + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_dir, &plf->dev, &ab8500_unsubscribe_fops); if (!file) goto err; - file = debugfs_create_file("hwreg", (S_IRUGO | S_IWUSR), - ab8500_dir, &plf->dev, &ab8500_hwreg_fops); + file = debugfs_create_file("hwreg", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_dir, &plf->dev, &ab8500_hwreg_fops); if (!file) goto err; - file = debugfs_create_file("bat_ctrl", (S_IRUGO | S_IWUSR), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bat_ctrl_fops); + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_dir, &plf->dev, &ab8500_modem_fops); if (!file) goto err; - file = debugfs_create_file("btemp_ball", (S_IRUGO | S_IWUSR), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_btemp_ball_fops); + file = debugfs_create_file("bat_ctrl", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bat_ctrl_fops); if (!file) goto err; - file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_v_fops); + file = debugfs_create_file("btemp_ball", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_btemp_ball_fops); if (!file) goto err; - file = debugfs_create_file("acc_detect1", (S_IRUGO | S_IWUSR), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect1_fops); + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_v_fops); if (!file) goto err; - file = debugfs_create_file("acc_detect2", (S_IRUGO | S_IWUSR), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect2_fops); + file = debugfs_create_file("acc_detect1", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect1_fops); if (!file) goto err; - file = debugfs_create_file("adc_aux1", (S_IRUGO | S_IWUSR), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux1_fops); + file = debugfs_create_file("acc_detect2", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect2_fops); if (!file) goto err; - file = debugfs_create_file("adc_aux2", (S_IRUGO | S_IWUSR), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux2_fops); + file = debugfs_create_file("adc_aux1", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux1_fops); if (!file) goto err; - file = debugfs_create_file("main_bat_v", (S_IRUGO | S_IWUSR), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_bat_v_fops); + file = debugfs_create_file("adc_aux2", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux2_fops); if (!file) goto err; - file = debugfs_create_file("vbus_v", (S_IRUGO | S_IWUSR), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_vbus_v_fops); + file = debugfs_create_file("main_bat_v", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_bat_v_fops); if (!file) goto err; - file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_c_fops); + file = debugfs_create_file("vbus_v", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_vbus_v_fops); + if (!file) + goto err; + + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_c_fops); + if (!file) + goto err; + + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_usb_charger_c_fops); + if (!file) + goto err; + + file = debugfs_create_file("bk_bat_v", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bk_bat_v_fops); + if (!file) + goto err; + + file = debugfs_create_file("die_temp", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_die_temp_fops); + if (!file) + goto err; + + file = debugfs_create_file("usb_id", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_usb_id_fops); + if (!file) + goto err; + + if (is_ab8540(ab8500)) { + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); + if (!file) + goto err; + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_gpadc_dir, &plf->dev, + &ab8540_gpadc_vbat_true_meas_fops); + if (!file) + goto err; + file = debugfs_create_file("batctrl_and_ibat", + (S_IRUGO | S_IWUGO), ab8500_gpadc_dir, + &plf->dev, &ab8540_gpadc_bat_ctrl_and_ibat_fops); + if (!file) + goto err; + file = debugfs_create_file("vbatmeas_and_ibat", + (S_IRUGO | S_IWUGO), ab8500_gpadc_dir, + &plf->dev, + &ab8540_gpadc_vbat_meas_and_ibat_fops); + if (!file) + goto err; + file = debugfs_create_file("vbattruemeas_and_ibat", + (S_IRUGO | S_IWUGO), ab8500_gpadc_dir, + &plf->dev, + &ab8540_gpadc_vbat_true_meas_and_ibat_fops); + if (!file) + goto err; + file = debugfs_create_file("battemp_and_ibat", + (S_IRUGO | S_IWUGO), ab8500_gpadc_dir, + &plf->dev, &ab8540_gpadc_bat_temp_and_ibat_fops); + if (!file) + goto err; + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); + if (!file) + goto err; + } + file = debugfs_create_file("avg_sample", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_avg_sample_fops); if (!file) goto err; - file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_usb_charger_c_fops); + file = debugfs_create_file("trig_edge", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_trig_edge_fops); if (!file) goto err; - file = debugfs_create_file("bk_bat_v", (S_IRUGO | S_IWUSR), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bk_bat_v_fops); + file = debugfs_create_file("trig_timer", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_trig_timer_fops); if (!file) goto err; - file = debugfs_create_file("die_temp", (S_IRUGO | S_IWUSR), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_die_temp_fops); + file = debugfs_create_file("conv_type", (S_IRUGO | S_IWUSR | S_IWGRP), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_conv_type_fops); if (!file) goto err; diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c index 5f341a50ee5..65f72284185 100644 --- a/drivers/mfd/ab8500-gpadc.c +++ b/drivers/mfd/ab8500-gpadc.c @@ -37,6 +37,13 @@ #define AB8500_GPADC_AUTODATAL_REG 0x07 #define AB8500_GPADC_AUTODATAH_REG 0x08 #define AB8500_GPADC_MUX_CTRL_REG 0x09 +#define AB8540_GPADC_MANDATA2L_REG 0x09 +#define AB8540_GPADC_MANDATA2H_REG 0x0A +#define AB8540_GPADC_APEAAX_REG 0x10 +#define AB8540_GPADC_APEAAT_REG 0x11 +#define AB8540_GPADC_APEAAM_REG 0x12 +#define AB8540_GPADC_APEAAH_REG 0x13 +#define AB8540_GPADC_APEAAL_REG 0x14 /* * OTP register offsets @@ -49,19 +56,29 @@ #define AB8500_GPADC_CAL_5 0x13 #define AB8500_GPADC_CAL_6 0x14 #define AB8500_GPADC_CAL_7 0x15 +/* New calibration for 8540 */ +#define AB8540_GPADC_OTP4_REG_7 0x38 +#define AB8540_GPADC_OTP4_REG_6 0x39 +#define AB8540_GPADC_OTP4_REG_5 0x3A /* gpadc constants */ #define EN_VINTCORE12 0x04 #define EN_VTVOUT 0x02 #define EN_GPADC 0x01 #define DIS_GPADC 0x00 -#define SW_AVG_16 0x60 +#define AVG_1 0x00 +#define AVG_4 0x20 +#define AVG_8 0x40 +#define AVG_16 0x60 #define ADC_SW_CONV 0x04 #define EN_ICHAR 0x80 #define BTEMP_PULL_UP 0x08 #define EN_BUF 0x40 #define DIS_ZERO 0x00 #define GPADC_BUSY 0x01 +#define EN_FALLING 0x10 +#define EN_TRIG_EDGE 0x02 +#define EN_VBIAS_XTAL_TEMP 0x02 /* GPADC constants from AB8500 spec, UM0836 */ #define ADC_RESOLUTION 1024 @@ -80,8 +97,21 @@ #define ADC_CH_BKBAT_MIN 0 #define ADC_CH_BKBAT_MAX 3200 +/* GPADC constants from AB8540 spec */ +#define ADC_CH_IBAT_MIN (-6000) /* mA range measured by ADC for ibat*/ +#define ADC_CH_IBAT_MAX 6000 +#define ADC_CH_IBAT_MIN_V (-60) /* mV range measured by ADC for ibat*/ +#define ADC_CH_IBAT_MAX_V 60 +#define IBAT_VDROP_L (-56) /* mV */ +#define IBAT_VDROP_H 56 + /* This is used to not lose precision when dividing to get gain and offset */ -#define CALIB_SCALE 1000 +#define CALIB_SCALE 1000 +/* + * Number of bits shift used to not lose precision + * when dividing to get ibat gain. + */ +#define CALIB_SHIFT_IBAT 20 /* Time in ms before disabling regulator */ #define GPADC_AUDOSUSPEND_DELAY 1 @@ -92,6 +122,7 @@ enum cal_channels { ADC_INPUT_VMAIN = 0, ADC_INPUT_BTEMP, ADC_INPUT_VBAT, + ADC_INPUT_IBAT, NBR_CAL_INPUTS, }; @@ -102,8 +133,10 @@ enum cal_channels { * @offset: Offset of the ADC channel */ struct adc_cal_data { - u64 gain; - u64 offset; + s64 gain; + s64 offset; + u16 otp_calib_hi; + u16 otp_calib_lo; }; /** @@ -116,7 +149,10 @@ struct adc_cal_data { * the completion of gpadc conversion * @ab8500_gpadc_lock: structure of type mutex * @regu: pointer to the struct regulator - * @irq: interrupt number that is used by gpadc + * @irq_sw: interrupt number that is used by gpadc for Sw + * conversion + * @irq_hw: interrupt number that is used by gpadc for Hw + * conversion * @cal_data array of ADC calibration data structs */ struct ab8500_gpadc { @@ -126,7 +162,8 @@ struct ab8500_gpadc { struct completion ab8500_gpadc_complete; struct mutex ab8500_gpadc_lock; struct regulator *regu; - int irq; + int irq_sw; + int irq_hw; struct adc_cal_data cal_data[NBR_CAL_INPUTS]; }; @@ -171,6 +208,7 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel, gpadc->cal_data[ADC_INPUT_VMAIN].offset) / CALIB_SCALE; break; + case XTAL_TEMP: case BAT_CTRL: case BTEMP_BALL: case ACC_DETECT1: @@ -189,6 +227,7 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel, break; case MAIN_BAT_V: + case VBAT_TRUE_MEAS: /* For some reason we don't have calibrated data */ if (!gpadc->cal_data[ADC_INPUT_VBAT].gain) { res = ADC_CH_VBAT_MIN + (ADC_CH_VBAT_MAX - @@ -232,6 +271,20 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel, ADC_RESOLUTION; break; + case IBAT_VIRTUAL_CHANNEL: + /* For some reason we don't have calibrated data */ + if (!gpadc->cal_data[ADC_INPUT_IBAT].gain) { + res = ADC_CH_IBAT_MIN + (ADC_CH_IBAT_MAX - + ADC_CH_IBAT_MIN) * ad_value / + ADC_RESOLUTION; + break; + } + /* Here we can use the calibrated data */ + res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_IBAT].gain + + gpadc->cal_data[ADC_INPUT_IBAT].offset) + >> CALIB_SHIFT_IBAT; + break; + default: dev_err(gpadc->dev, "unknown channel, not possible to convert\n"); @@ -244,25 +297,35 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel, EXPORT_SYMBOL(ab8500_gpadc_ad_to_voltage); /** - * ab8500_gpadc_convert() - gpadc conversion + * ab8500_gpadc_sw_hw_convert() - gpadc conversion * @channel: analog channel to be converted to digital data + * @avg_sample: number of ADC sample to average + * @trig_egde: selected ADC trig edge + * @trig_timer: selected ADC trigger delay timer + * @conv_type: selected conversion type (HW or SW conversion) * * This function converts the selected analog i/p to digital * data. */ -int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel) +int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel, + u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type) { int ad_value; int voltage; - ad_value = ab8500_gpadc_read_raw(gpadc, channel); - if (ad_value < 0) { - dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n", channel); + ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample, + trig_edge, trig_timer, conv_type); +/* On failure retry a second time */ + if (ad_value < 0) + ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample, + trig_edge, trig_timer, conv_type); +if (ad_value < 0) { + dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n", + channel); return ad_value; } voltage = ab8500_gpadc_ad_to_voltage(gpadc, channel, ad_value); - if (voltage < 0) dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:" " %d AD: 0x%x\n", channel, ad_value); @@ -274,21 +337,46 @@ EXPORT_SYMBOL(ab8500_gpadc_convert); /** * ab8500_gpadc_read_raw() - gpadc read * @channel: analog channel to be read + * @avg_sample: number of ADC sample to average + * @trig_edge: selected trig edge + * @trig_timer: selected ADC trigger delay timer + * @conv_type: selected conversion type (HW or SW conversion) * - * This function obtains the raw ADC value, this then needs - * to be converted by calling ab8500_gpadc_ad_to_voltage() + * This function obtains the raw ADC value for an hardware conversion, + * this then needs to be converted by calling ab8500_gpadc_ad_to_voltage() */ -int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel) +int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel, + u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type) +{ + int raw_data; + raw_data = ab8500_gpadc_double_read_raw(gpadc, channel, + avg_sample, trig_edge, trig_timer, conv_type, NULL); + return raw_data; +} + +int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel, + u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type, + int *ibat) { int ret; int looplimit = 0; - u8 val, low_data, high_data; + unsigned long completion_timeout; + u8 val, low_data, high_data, low_data2, high_data2; + u8 val_reg1 = 0; + unsigned int delay_min = 0; + unsigned int delay_max = 0; + u8 data_low_addr, data_high_addr; if (!gpadc) return -ENODEV; - mutex_lock(&gpadc->ab8500_gpadc_lock); + /* check if convertion is supported */ + if ((gpadc->irq_sw < 0) && (conv_type == ADC_SW)) + return -ENOTSUPP; + if ((gpadc->irq_hw < 0) && (conv_type == ADC_HW)) + return -ENOTSUPP; + mutex_lock(&gpadc->ab8500_gpadc_lock); /* Enable VTVout LDO this is required for GPADC */ pm_runtime_get_sync(gpadc->dev); @@ -309,16 +397,34 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel) } /* Enable GPADC */ - ret = abx500_mask_and_set_register_interruptible(gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, EN_GPADC, EN_GPADC); - if (ret < 0) { - dev_err(gpadc->dev, "gpadc_conversion: enable gpadc failed\n"); - goto out; + val_reg1 |= EN_GPADC; + + /* Select the channel source and set average samples */ + switch (avg_sample) { + case SAMPLE_1: + val = channel | AVG_1; + break; + case SAMPLE_4: + val = channel | AVG_4; + break; + case SAMPLE_8: + val = channel | AVG_8; + break; + default: + val = channel | AVG_16; + break; } - /* Select the channel source and set average samples to 16 */ - ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC, - AB8500_GPADC_CTRL2_REG, (channel | SW_AVG_16)); + if (conv_type == ADC_HW) { + ret = abx500_set_register_interruptible(gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL3_REG, val); + val_reg1 |= EN_TRIG_EDGE; + if (trig_edge) + val_reg1 |= EN_FALLING; + } + else + ret = abx500_set_register_interruptible(gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL2_REG, val); if (ret < 0) { dev_err(gpadc->dev, "gpadc_conversion: set avg samples failed\n"); @@ -333,71 +439,129 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel) switch (channel) { case MAIN_CHARGER_C: case USB_CHARGER_C: - ret = abx500_mask_and_set_register_interruptible(gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, - EN_BUF | EN_ICHAR, - EN_BUF | EN_ICHAR); + val_reg1 |= EN_BUF | EN_ICHAR; break; case BTEMP_BALL: if (!is_ab8500_2p0_or_earlier(gpadc->parent)) { - /* Turn on btemp pull-up on ABB 3.0 */ - ret = abx500_mask_and_set_register_interruptible( - gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, - EN_BUF | BTEMP_PULL_UP, - EN_BUF | BTEMP_PULL_UP); - - /* - * Delay might be needed for ABB8500 cut 3.0, if not, remove - * when hardware will be available - */ - usleep_range(1000, 1000); + val_reg1 |= EN_BUF | BTEMP_PULL_UP; + /* + * Delay might be needed for ABB8500 cut 3.0, if not, + * remove when hardware will be availible + */ + delay_min = 1000; /* Delay in micro seconds */ + delay_max = 10000; /* large range to optimise sleep mode */ break; } /* Intentional fallthrough */ default: - ret = abx500_mask_and_set_register_interruptible(gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, EN_BUF, EN_BUF); + val_reg1 |= EN_BUF; break; } + + /* Write configuration to register */ + ret = abx500_set_register_interruptible(gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL1_REG, val_reg1); if (ret < 0) { dev_err(gpadc->dev, - "gpadc_conversion: select falling edge failed\n"); + "gpadc_conversion: set Control register failed\n"); goto out; } - ret = abx500_mask_and_set_register_interruptible(gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, ADC_SW_CONV, ADC_SW_CONV); - if (ret < 0) { - dev_err(gpadc->dev, - "gpadc_conversion: start s/w conversion failed\n"); - goto out; + if (delay_min != 0) + usleep_range(delay_min, delay_max); + + if (conv_type == ADC_HW) { + /* Set trigger delay timer */ + ret = abx500_set_register_interruptible(gpadc->dev, + AB8500_GPADC, AB8500_GPADC_AUTO_TIMER_REG, trig_timer); + if (ret < 0) { + dev_err(gpadc->dev, + "gpadc_conversion: trig timer failed\n"); + goto out; + } + completion_timeout = 2 * HZ; + data_low_addr = AB8500_GPADC_AUTODATAL_REG; + data_high_addr = AB8500_GPADC_AUTODATAH_REG; + } else { + /* Start SW conversion */ + ret = abx500_mask_and_set_register_interruptible(gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL1_REG, + ADC_SW_CONV, ADC_SW_CONV); + if (ret < 0) { + dev_err(gpadc->dev, + "gpadc_conversion: start s/w conv failed\n"); + goto out; + } + completion_timeout = msecs_to_jiffies(CONVERSION_TIME); + data_low_addr = AB8500_GPADC_MANDATAL_REG; + data_high_addr = AB8500_GPADC_MANDATAH_REG; } + /* wait for completion of conversion */ if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, - msecs_to_jiffies(CONVERSION_TIME))) { + completion_timeout)) { dev_err(gpadc->dev, - "timeout: didn't receive GPADC conversion interrupt\n"); + "timeout didn't receive GPADC conv interrupt\n"); ret = -EINVAL; goto out; } /* Read the converted RAW data */ - ret = abx500_get_register_interruptible(gpadc->dev, AB8500_GPADC, - AB8500_GPADC_MANDATAL_REG, &low_data); + ret = abx500_get_register_interruptible(gpadc->dev, + AB8500_GPADC, data_low_addr, &low_data); if (ret < 0) { dev_err(gpadc->dev, "gpadc_conversion: read low data failed\n"); goto out; } - ret = abx500_get_register_interruptible(gpadc->dev, AB8500_GPADC, - AB8500_GPADC_MANDATAH_REG, &high_data); + ret = abx500_get_register_interruptible(gpadc->dev, + AB8500_GPADC, data_high_addr, &high_data); if (ret < 0) { - dev_err(gpadc->dev, - "gpadc_conversion: read high data failed\n"); + dev_err(gpadc->dev, "gpadc_conversion: read high data failed\n"); goto out; } + /* Check if double convertion is required */ + if ((channel == BAT_CTRL_AND_IBAT) || + (channel == VBAT_MEAS_AND_IBAT) || + (channel == VBAT_TRUE_MEAS_AND_IBAT) || + (channel == BAT_TEMP_AND_IBAT)) { + + if (conv_type == ADC_HW) { + /* not supported */ + ret = -ENOTSUPP; + dev_err(gpadc->dev, + "gpadc_conversion: only SW double conversion supported\n"); + goto out; + } else { + /* Read the converted RAW data 2 */ + ret = abx500_get_register_interruptible(gpadc->dev, + AB8500_GPADC, AB8540_GPADC_MANDATA2L_REG, + &low_data2); + if (ret < 0) { + dev_err(gpadc->dev, + "gpadc_conversion: read sw low data 2 failed\n"); + goto out; + } + + ret = abx500_get_register_interruptible(gpadc->dev, + AB8500_GPADC, AB8540_GPADC_MANDATA2H_REG, + &high_data2); + if (ret < 0) { + dev_err(gpadc->dev, + "gpadc_conversion: read sw high data 2 failed\n"); + goto out; + } + if (ibat != NULL) { + *ibat = (high_data2 << 8) | low_data2; + } else { + dev_warn(gpadc->dev, + "gpadc_conversion: ibat not stored\n"); + } + + } + } + /* Disable GPADC */ ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC, AB8500_GPADC_CTRL1_REG, DIS_GPADC); @@ -406,6 +570,7 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel) goto out; } + /* Disable VTVout LDO this is required for GPADC */ pm_runtime_mark_last_busy(gpadc->dev); pm_runtime_put_autosuspend(gpadc->dev); @@ -422,9 +587,7 @@ out: */ (void) abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC, AB8500_GPADC_CTRL1_REG, DIS_GPADC); - pm_runtime_put(gpadc->dev); - mutex_unlock(&gpadc->ab8500_gpadc_lock); dev_err(gpadc->dev, "gpadc_conversion: Failed to AD convert channel %d\n", channel); @@ -433,16 +596,16 @@ out: EXPORT_SYMBOL(ab8500_gpadc_read_raw); /** - * ab8500_bm_gpswadcconvend_handler() - isr for s/w gpadc conversion completion + * ab8500_bm_gpadcconvend_handler() - isr for gpadc conversion completion * @irq: irq number * @data: pointer to the data passed during request irq * - * This is a interrupt service routine for s/w gpadc conversion completion. + * This is a interrupt service routine for gpadc conversion completion. * Notifies the gpadc completion is completed and the converted raw value * can be read from the registers. * Returns IRQ status(IRQ_HANDLED) */ -static irqreturn_t ab8500_bm_gpswadcconvend_handler(int irq, void *_gpadc) +static irqreturn_t ab8500_bm_gpadcconvend_handler(int irq, void *_gpadc) { struct ab8500_gpadc *gpadc = _gpadc; @@ -461,15 +624,27 @@ static int otp_cal_regs[] = { AB8500_GPADC_CAL_7, }; +static int otp4_cal_regs[] = { + AB8540_GPADC_OTP4_REG_7, + AB8540_GPADC_OTP4_REG_6, + AB8540_GPADC_OTP4_REG_5, +}; + static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) { int i; int ret[ARRAY_SIZE(otp_cal_regs)]; u8 gpadc_cal[ARRAY_SIZE(otp_cal_regs)]; - + int ret_otp4[ARRAY_SIZE(otp4_cal_regs)]; + u8 gpadc_otp4[ARRAY_SIZE(otp4_cal_regs)]; int vmain_high, vmain_low; int btemp_high, btemp_low; int vbat_high, vbat_low; + int ibat_high, ibat_low; + s64 V_gain, V_offset, V2A_gain, V2A_offset; + struct ab8500 *ab8500; + + ab8500 = gpadc->parent; /* First we read all OTP registers and store the error code */ for (i = 0; i < ARRAY_SIZE(otp_cal_regs); i++) { @@ -489,7 +664,7 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) * bt_h/l = btemp_high/low * vb_h/l = vbat_high/low * - * Data bits: + * Data bits 8500/9540: * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 * |.......|.......|.......|.......|.......|.......|.......|....... * | | vm_h9 | vm_h8 @@ -507,6 +682,35 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 | * |.......|.......|.......|.......|.......|.......|.......|....... * + * Data bits 8540: + * OTP2 + * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | + * |.......|.......|.......|.......|.......|.......|.......|....... + * | vm_h9 | vm_h8 | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 | + * |.......|.......|.......|.......|.......|.......|.......|....... + * + * Data bits 8540: + * OTP4 + * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | | ib_h9 | ib_h8 | ib_h7 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | ib_h6 | ib_h5 | ib_h4 | ib_h3 | ib_h2 | ib_h1 | ib_h0 | ib_l5 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | ib_l4 | ib_l3 | ib_l2 | ib_l1 | ib_l0 | + * * * Ideal output ADC codes corresponding to injected input voltages * during manufacturing is: @@ -519,38 +723,116 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) * vbat_low: Vin = 2380mV / ADC ideal code = 33 */ - /* Calculate gain and offset for VMAIN if all reads succeeded */ - if (!(ret[0] < 0 || ret[1] < 0 || ret[2] < 0)) { - vmain_high = (((gpadc_cal[0] & 0x03) << 8) | - ((gpadc_cal[1] & 0x3F) << 2) | - ((gpadc_cal[2] & 0xC0) >> 6)); + if (is_ab8540(ab8500)) { + /* Calculate gain and offset for VMAIN if all reads succeeded*/ + if (!(ret[1] < 0 || ret[2] < 0)) { + vmain_high = (((gpadc_cal[1] & 0xFF) << 2) | + ((gpadc_cal[2] & 0xC0) >> 6)); + vmain_low = ((gpadc_cal[2] & 0x3E) >> 1); + + gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi = + (u16)vmain_high; + gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo = + (u16)vmain_low; + + gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE * + (19500 - 315) / (vmain_high - vmain_low); + gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE * + 19500 - (CALIB_SCALE * (19500 - 315) / + (vmain_high - vmain_low)) * vmain_high; + } else { + gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0; + } - vmain_low = ((gpadc_cal[2] & 0x3E) >> 1); + /* Read IBAT calibration Data */ + for (i = 0; i < ARRAY_SIZE(otp4_cal_regs); i++) { + ret_otp4[i] = abx500_get_register_interruptible( + gpadc->dev, AB8500_OTP_EMUL, + otp4_cal_regs[i], &gpadc_otp4[i]); + if (ret_otp4[i] < 0) + dev_err(gpadc->dev, + "%s: read otp4 reg 0x%02x failed\n", + __func__, otp4_cal_regs[i]); + } - gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE * - (19500 - 315) / (vmain_high - vmain_low); + /* Calculate gain and offset for IBAT if all reads succeeded */ + if (!(ret_otp4[0] < 0 || ret_otp4[1] < 0 || ret_otp4[2] < 0)) { + ibat_high = (((gpadc_otp4[0] & 0x07) << 7) | + ((gpadc_otp4[1] & 0xFE) >> 1)); + ibat_low = (((gpadc_otp4[1] & 0x01) << 5) | + ((gpadc_otp4[2] & 0xF8) >> 3)); + + gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi = + (u16)ibat_high; + gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo = + (u16)ibat_low; + + V_gain = ((IBAT_VDROP_H - IBAT_VDROP_L) + << CALIB_SHIFT_IBAT) / (ibat_high - ibat_low); + + V_offset = (IBAT_VDROP_H << CALIB_SHIFT_IBAT) - + (((IBAT_VDROP_H - IBAT_VDROP_L) << + CALIB_SHIFT_IBAT) / (ibat_high - ibat_low)) + * ibat_high; + /* + * Result obtained is in mV (at a scale factor), + * we need to calculate gain and offset to get mA + */ + V2A_gain = (ADC_CH_IBAT_MAX - ADC_CH_IBAT_MIN)/ + (ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V); + V2A_offset = ((ADC_CH_IBAT_MAX_V * ADC_CH_IBAT_MIN - + ADC_CH_IBAT_MAX * ADC_CH_IBAT_MIN_V) + << CALIB_SHIFT_IBAT) + / (ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V); + + gpadc->cal_data[ADC_INPUT_IBAT].gain = V_gain * V2A_gain; + gpadc->cal_data[ADC_INPUT_IBAT].offset = V_offset * + V2A_gain + V2A_offset; + } else { + gpadc->cal_data[ADC_INPUT_IBAT].gain = 0; + } - gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE * 19500 - - (CALIB_SCALE * (19500 - 315) / - (vmain_high - vmain_low)) * vmain_high; + dev_dbg(gpadc->dev, "IBAT gain %llu offset %llu\n", + gpadc->cal_data[ADC_INPUT_IBAT].gain, + gpadc->cal_data[ADC_INPUT_IBAT].offset); } else { - gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0; + /* Calculate gain and offset for VMAIN if all reads succeeded */ + if (!(ret[0] < 0 || ret[1] < 0 || ret[2] < 0)) { + vmain_high = (((gpadc_cal[0] & 0x03) << 8) | + ((gpadc_cal[1] & 0x3F) << 2) | + ((gpadc_cal[2] & 0xC0) >> 6)); + vmain_low = ((gpadc_cal[2] & 0x3E) >> 1); + + gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi = + (u16)vmain_high; + gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo = + (u16)vmain_low; + + gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE * + (19500 - 315) / (vmain_high - vmain_low); + + gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE * + 19500 - (CALIB_SCALE * (19500 - 315) / + (vmain_high - vmain_low)) * vmain_high; + } else { + gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0; + } } /* Calculate gain and offset for BTEMP if all reads succeeded */ if (!(ret[2] < 0 || ret[3] < 0 || ret[4] < 0)) { btemp_high = (((gpadc_cal[2] & 0x01) << 9) | - (gpadc_cal[3] << 1) | - ((gpadc_cal[4] & 0x80) >> 7)); - + (gpadc_cal[3] << 1) | ((gpadc_cal[4] & 0x80) >> 7)); btemp_low = ((gpadc_cal[4] & 0x7C) >> 2); + gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi = (u16)btemp_high; + gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo = (u16)btemp_low; + gpadc->cal_data[ADC_INPUT_BTEMP].gain = CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low); - gpadc->cal_data[ADC_INPUT_BTEMP].offset = CALIB_SCALE * 1300 - - (CALIB_SCALE * (1300 - 21) / - (btemp_high - btemp_low)) * btemp_high; + (CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low)) + * btemp_high; } else { gpadc->cal_data[ADC_INPUT_BTEMP].gain = 0; } @@ -560,9 +842,11 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) vbat_high = (((gpadc_cal[4] & 0x03) << 8) | gpadc_cal[5]); vbat_low = ((gpadc_cal[6] & 0xFC) >> 2); + gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi = (u16)vbat_high; + gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo = (u16)vbat_low; + gpadc->cal_data[ADC_INPUT_VBAT].gain = CALIB_SCALE * (4700 - 2380) / (vbat_high - vbat_low); - gpadc->cal_data[ADC_INPUT_VBAT].offset = CALIB_SCALE * 4700 - (CALIB_SCALE * (4700 - 2380) / (vbat_high - vbat_low)) * vbat_high; @@ -608,6 +892,31 @@ static int ab8500_gpadc_runtime_idle(struct device *dev) return 0; } +static int ab8500_gpadc_suspend(struct device *dev) +{ + struct ab8500_gpadc *gpadc = dev_get_drvdata(dev); + + mutex_lock(&gpadc->ab8500_gpadc_lock); + + pm_runtime_get_sync(dev); + + regulator_disable(gpadc->regu); + return 0; +} + +static int ab8500_gpadc_resume(struct device *dev) +{ + struct ab8500_gpadc *gpadc = dev_get_drvdata(dev); + + regulator_enable(gpadc->regu); + + pm_runtime_mark_last_busy(gpadc->dev); + pm_runtime_put_autosuspend(gpadc->dev); + + mutex_unlock(&gpadc->ab8500_gpadc_lock); + return 0; +} + static int ab8500_gpadc_probe(struct platform_device *pdev) { int ret = 0; @@ -619,13 +928,13 @@ static int ab8500_gpadc_probe(struct platform_device *pdev) return -ENOMEM; } - gpadc->irq = platform_get_irq_byname(pdev, "SW_CONV_END"); - if (gpadc->irq < 0) { - dev_err(&pdev->dev, "failed to get platform irq-%d\n", - gpadc->irq); - ret = gpadc->irq; - goto fail; - } + gpadc->irq_sw = platform_get_irq_byname(pdev, "SW_CONV_END"); + if (gpadc->irq_sw < 0) + dev_err(gpadc->dev, "failed to get platform sw_conv_end irq\n"); + + gpadc->irq_hw = platform_get_irq_byname(pdev, "HW_CONV_END"); + if (gpadc->irq_hw < 0) + dev_err(gpadc->dev, "failed to get platform hw_conv_end irq\n"); gpadc->dev = &pdev->dev; gpadc->parent = dev_get_drvdata(pdev->dev.parent); @@ -634,15 +943,31 @@ static int ab8500_gpadc_probe(struct platform_device *pdev) /* Initialize completion used to notify completion of conversion */ init_completion(&gpadc->ab8500_gpadc_complete); - /* Register interrupt - SwAdcComplete */ - ret = request_threaded_irq(gpadc->irq, NULL, - ab8500_bm_gpswadcconvend_handler, - IRQF_ONESHOT | IRQF_NO_SUSPEND | IRQF_SHARED, - "ab8500-gpadc", gpadc); - if (ret < 0) { - dev_err(gpadc->dev, "Failed to register interrupt, irq: %d\n", - gpadc->irq); - goto fail; + /* Register interrupts */ + if (gpadc->irq_sw >= 0) { + ret = request_threaded_irq(gpadc->irq_sw, NULL, + ab8500_bm_gpadcconvend_handler, + IRQF_NO_SUSPEND | IRQF_SHARED, "ab8500-gpadc-sw", + gpadc); + if (ret < 0) { + dev_err(gpadc->dev, + "Failed to register interrupt irq: %d\n", + gpadc->irq_sw); + goto fail; + } + } + + if (gpadc->irq_hw >= 0) { + ret = request_threaded_irq(gpadc->irq_hw, NULL, + ab8500_bm_gpadcconvend_handler, + IRQF_NO_SUSPEND | IRQF_SHARED, "ab8500-gpadc-hw", + gpadc); + if (ret < 0) { + dev_err(gpadc->dev, + "Failed to register interrupt irq: %d\n", + gpadc->irq_hw); + goto fail_irq; + } } /* VTVout LDO used to power up ab8500-GPADC */ @@ -669,11 +994,13 @@ static int ab8500_gpadc_probe(struct platform_device *pdev) ab8500_gpadc_read_calibration_data(gpadc); list_add_tail(&gpadc->node, &ab8500_gpadc_list); dev_dbg(gpadc->dev, "probe success\n"); + return 0; fail_enable: fail_irq: - free_irq(gpadc->irq, gpadc); + free_irq(gpadc->irq_sw, gpadc); + free_irq(gpadc->irq_hw, gpadc); fail: kfree(gpadc); gpadc = NULL; @@ -687,7 +1014,10 @@ static int ab8500_gpadc_remove(struct platform_device *pdev) /* remove this gpadc entry from the list */ list_del(&gpadc->node); /* remove interrupt - completion of Sw ADC conversion */ - free_irq(gpadc->irq, gpadc); + if (gpadc->irq_sw >= 0) + free_irq(gpadc->irq_sw, gpadc); + if (gpadc->irq_hw >= 0) + free_irq(gpadc->irq_hw, gpadc); pm_runtime_get_sync(gpadc->dev); pm_runtime_disable(gpadc->dev); @@ -707,6 +1037,9 @@ static const struct dev_pm_ops ab8500_gpadc_pm_ops = { SET_RUNTIME_PM_OPS(ab8500_gpadc_runtime_suspend, ab8500_gpadc_runtime_resume, ab8500_gpadc_runtime_idle) + SET_SYSTEM_SLEEP_PM_OPS(ab8500_gpadc_suspend, + ab8500_gpadc_resume) + }; static struct platform_driver ab8500_gpadc_driver = { @@ -729,10 +1062,30 @@ static void __exit ab8500_gpadc_exit(void) platform_driver_unregister(&ab8500_gpadc_driver); } +/** + * ab8540_gpadc_get_otp() - returns OTP values + * + */ +void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc, + u16 *vmain_l, u16 *vmain_h, u16 *btemp_l, u16 *btemp_h, + u16 *vbat_l, u16 *vbat_h, u16 *ibat_l, u16 *ibat_h) +{ + *vmain_l = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo; + *vmain_h = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi; + *btemp_l = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo; + *btemp_h = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi; + *vbat_l = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo; + *vbat_h = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi; + *ibat_l = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo; + *ibat_h = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi; + return ; +} + subsys_initcall_sync(ab8500_gpadc_init); module_exit(ab8500_gpadc_exit); MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson"); +MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson," + "M'boumba Cedric Madianga"); MODULE_ALIAS("platform:ab8500_gpadc"); MODULE_DESCRIPTION("AB8500 GPADC driver"); diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c index 108fd86552f..272479cdb10 100644 --- a/drivers/mfd/ab8500-sysctrl.c +++ b/drivers/mfd/ab8500-sysctrl.c @@ -15,19 +15,30 @@ #include <linux/mfd/abx500/ab8500.h> #include <linux/mfd/abx500/ab8500-sysctrl.h> +/* RtcCtrl bits */ +#define AB8500_ALARM_MIN_LOW 0x08 +#define AB8500_ALARM_MIN_MID 0x09 +#define RTC_CTRL 0x0B +#define RTC_ALARM_ENABLE 0x4 + static struct device *sysctrl_dev; void ab8500_power_off(void) { sigset_t old; sigset_t all; - static char *pss[] = {"ab8500_ac", "ab8500_usb"}; + static char *pss[] = {"ab8500_ac", "pm2301", "ab8500_usb"}; int i; bool charger_present = false; union power_supply_propval val; struct power_supply *psy; int ret; + if (sysctrl_dev == NULL) { + pr_err("%s: sysctrl not initialized\n", __func__); + return; + } + /* * If we have a charger connected and we're powering off, * reboot into charge-only mode. @@ -74,6 +85,63 @@ shutdown: } } +/* + * Use the AB WD to reset the platform. It will perform a hard + * reset instead of a soft reset. Write the reset reason to + * the AB before reset, which can be read upon restart. + */ +void ab8500_restart(char mode, const char *cmd) +{ + struct ab8500_platform_data *plat; + struct ab8500_sysctrl_platform_data *pdata; + u16 reason = 0; + u8 val; + + if (sysctrl_dev == NULL) { + pr_err("%s: sysctrl not initialized\n", __func__); + return; + } + + plat = dev_get_platdata(sysctrl_dev->parent); + pdata = plat->sysctrl; + if (pdata->reboot_reason_code) + reason = pdata->reboot_reason_code(cmd); + else + pr_warn("[%s] No reboot reason set. Default reason %d\n", + __func__, reason); + + /* + * Disable RTC alarm, just a precaution so that no alarm + * is running when WD reset is executed. + */ + abx500_get_register_interruptible(sysctrl_dev, AB8500_RTC, + RTC_CTRL , &val); + abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC, + RTC_CTRL , (val & ~RTC_ALARM_ENABLE)); + + /* + * Android is not using the RTC alarm registers during reboot + * so we borrow them for writing the reason of reset + */ + + /* reason[8 LSB] */ + val = reason & 0xFF; + abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC, + AB8500_ALARM_MIN_LOW , val); + + /* reason[8 MSB] */ + val = (reason>>8) & 0xFF; + abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC, + AB8500_ALARM_MIN_MID , val); + + /* Setting WD timeout to 0 */ + ab8500_sysctrl_write(AB8500_MAINWDOGTIMER, 0xFF, 0x0); + + /* Setting the parameters to AB8500 WD*/ + ab8500_sysctrl_write(AB8500_MAINWDOGCTRL, 0xFF, (AB8500_ENABLE_WD | + AB8500_WD_RESTART_ON_EXPIRE | AB8500_KICK_WD)); +} + static inline bool valid_bank(u8 bank) { return ((bank == AB8500_SYS_CTRL1_BLOCK) || @@ -85,7 +153,7 @@ int ab8500_sysctrl_read(u16 reg, u8 *value) u8 bank; if (sysctrl_dev == NULL) - return -EAGAIN; + return -EINVAL; bank = (reg >> 8); if (!valid_bank(bank)) @@ -101,7 +169,7 @@ int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value) u8 bank; if (sysctrl_dev == NULL) - return -EAGAIN; + return -EINVAL; bank = (reg >> 8); if (!valid_bank(bank)) @@ -114,28 +182,36 @@ EXPORT_SYMBOL(ab8500_sysctrl_write); static int ab8500_sysctrl_probe(struct platform_device *pdev) { + struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent); struct ab8500_platform_data *plat; struct ab8500_sysctrl_platform_data *pdata; - sysctrl_dev = &pdev->dev; plat = dev_get_platdata(pdev->dev.parent); + + if (!(plat && plat->sysctrl)) + return -EINVAL; + if (plat->pm_power_off) pm_power_off = ab8500_power_off; pdata = plat->sysctrl; if (pdata) { - int ret, i, j; + int last, ret, i, j; + + if (is_ab8505(ab8500)) + last = AB8500_SYSCLKREQ4RFCLKBUF; + else + last = AB8500_SYSCLKREQ8RFCLKBUF; - for (i = AB8500_SYSCLKREQ1RFCLKBUF; - i <= AB8500_SYSCLKREQ8RFCLKBUF; i++) { + for (i = AB8500_SYSCLKREQ1RFCLKBUF; i <= last; i++) { j = i - AB8500_SYSCLKREQ1RFCLKBUF; ret = ab8500_sysctrl_write(i, 0xff, - pdata->initial_req_buf_config[j]); + pdata->initial_req_buf_config[j]); dev_dbg(&pdev->dev, - "Setting SysClkReq%dRfClkBuf 0x%X\n", - j + 1, - pdata->initial_req_buf_config[j]); + "Setting SysClkReq%dRfClkBuf 0x%X\n", + j + 1, + pdata->initial_req_buf_config[j]); if (ret < 0) { dev_err(&pdev->dev, "unable to set sysClkReq%dRfClkBuf: " |