diff options
Diffstat (limited to 'drivers/mmc/host/sdhci-esdhc-imx.c')
| -rw-r--r-- | drivers/mmc/host/sdhci-esdhc-imx.c | 42 |
1 files changed, 42 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 67a2da961bb..a19967d0bfc 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -19,13 +19,31 @@ #include <linux/slab.h> #include <linux/mmc/host.h> #include <linux/mmc/sdhci-pltfm.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sdio.h> #include <mach/hardware.h> #include <mach/esdhc.h> #include "sdhci.h" #include "sdhci-pltfm.h" #include "sdhci-esdhc.h" +/* VENDOR SPEC register */ +#define SDHCI_VENDOR_SPEC 0xC0 +#define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002 + #define ESDHC_FLAG_GPIO_FOR_CD_WP (1 << 0) +/* + * The CMDTYPE of the CMD register (offset 0xE) should be set to + * "11" when the STOP CMD12 is issued on imx53 to abort one + * open ended multi-blk IO. Otherwise the TC INT wouldn't + * be generated. + * In exact block transfer, the controller doesn't complete the + * operations automatically as required at the end of the + * transfer and remains on hold if the abort command is not sent. + * As a result, the TC flag is not asserted and SW received timeout + * exeception. Bit1 of Vendor Spec registor is used to fix it. + */ +#define ESDHC_FLAG_MULTIBLK_NO_INT (1 << 1) struct pltfm_imx_data { int flags; @@ -78,6 +96,15 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg) */ val &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT); + if (unlikely((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT) + && (reg == SDHCI_INT_STATUS) + && (val & SDHCI_INT_DATA_END))) { + u32 v; + v = readl(host->ioaddr + SDHCI_VENDOR_SPEC); + v &= ~SDHCI_VENDOR_SPEC_SDIO_QUIRK; + writel(v, host->ioaddr + SDHCI_VENDOR_SPEC); + } + writel(val, host->ioaddr + reg); } @@ -100,9 +127,21 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) * Postpone this write, we must do it together with a * command write that is down below. */ + if ((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT) + && (host->cmd->opcode == SD_IO_RW_EXTENDED) + && (host->cmd->data->blocks > 1) + && (host->cmd->data->flags & MMC_DATA_READ)) { + u32 v; + v = readl(host->ioaddr + SDHCI_VENDOR_SPEC); + v |= SDHCI_VENDOR_SPEC_SDIO_QUIRK; + writel(v, host->ioaddr + SDHCI_VENDOR_SPEC); + } imx_data->scratchpad = val; return; case SDHCI_COMMAND: + if ((host->cmd->opcode == MMC_STOP_TRANSMISSION) + && (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) + val |= SDHCI_CMD_ABORTCMD; writel(val << 16 | imx_data->scratchpad, host->ioaddr + SDHCI_TRANSFER_MODE); return; @@ -215,6 +254,9 @@ static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pd sdhci_esdhc_ops.get_ro = esdhc_pltfm_get_ro; } + if (!(cpu_is_mx25() || cpu_is_mx35() || cpu_is_mx51())) + imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT; + if (boarddata) { err = gpio_request_one(boarddata->wp_gpio, GPIOF_IN, "ESDHC_WP"); if (err) { |