aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rt2x00/rt2800.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2800.h')
-rw-r--r--drivers/net/wireless/rt2x00/rt2800.h93
1 files changed, 85 insertions, 8 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 2aa03751c34..ed4ebcdde7c 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -63,7 +63,6 @@
*/
#define REV_RT2860C 0x0100
#define REV_RT2860D 0x0101
-#define REV_RT2870D 0x0101
#define REV_RT2872E 0x0200
#define REV_RT3070E 0x0200
#define REV_RT3070F 0x0201
@@ -75,7 +74,7 @@
* Signal information.
* Default offset is required for RSSI <-> dBm conversion.
*/
-#define DEFAULT_RSSI_OFFSET 120 /* FIXME */
+#define DEFAULT_RSSI_OFFSET 120
/*
* Register layout information.
@@ -99,6 +98,21 @@
*/
/*
+ * E2PROM_CSR: PCI EEPROM control register.
+ * RELOAD: Write 1 to reload eeprom content.
+ * TYPE: 0: 93c46, 1:93c66.
+ * LOAD_STATUS: 1:loading, 0:done.
+ */
+#define E2PROM_CSR 0x0004
+#define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000001)
+#define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000002)
+#define E2PROM_CSR_DATA_IN FIELD32(0x00000004)
+#define E2PROM_CSR_DATA_OUT FIELD32(0x00000008)
+#define E2PROM_CSR_TYPE FIELD32(0x00000030)
+#define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040)
+#define E2PROM_CSR_RELOAD FIELD32(0x00000080)
+
+/*
* OPT_14: Unknown register used by rt3xxx devices.
*/
#define OPT_14_CSR 0x0114
@@ -322,6 +336,39 @@
#define RX_DRX_IDX 0x029c
/*
+ * USB_DMA_CFG
+ * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns.
+ * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes.
+ * PHY_CLEAR: phy watch dog enable.
+ * TX_CLEAR: Clear USB DMA TX path.
+ * TXOP_HALT: Halt TXOP count down when TX buffer is full.
+ * RX_BULK_AGG_EN: Enable Rx Bulk Aggregation.
+ * RX_BULK_EN: Enable USB DMA Rx.
+ * TX_BULK_EN: Enable USB DMA Tx.
+ * EP_OUT_VALID: OUT endpoint data valid.
+ * RX_BUSY: USB DMA RX FSM busy.
+ * TX_BUSY: USB DMA TX FSM busy.
+ */
+#define USB_DMA_CFG 0x02a0
+#define USB_DMA_CFG_RX_BULK_AGG_TIMEOUT FIELD32(0x000000ff)
+#define USB_DMA_CFG_RX_BULK_AGG_LIMIT FIELD32(0x0000ff00)
+#define USB_DMA_CFG_PHY_CLEAR FIELD32(0x00010000)
+#define USB_DMA_CFG_TX_CLEAR FIELD32(0x00080000)
+#define USB_DMA_CFG_TXOP_HALT FIELD32(0x00100000)
+#define USB_DMA_CFG_RX_BULK_AGG_EN FIELD32(0x00200000)
+#define USB_DMA_CFG_RX_BULK_EN FIELD32(0x00400000)
+#define USB_DMA_CFG_TX_BULK_EN FIELD32(0x00800000)
+#define USB_DMA_CFG_EP_OUT_VALID FIELD32(0x3f000000)
+#define USB_DMA_CFG_RX_BUSY FIELD32(0x40000000)
+#define USB_DMA_CFG_TX_BUSY FIELD32(0x80000000)
+
+/*
+ * US_CYC_CNT
+ */
+#define US_CYC_CNT 0x02a4
+#define US_CYC_CNT_CLOCK_CYCLE FIELD32(0x000000ff)
+
+/*
* PBF_SYS_CTRL
* HOST_RAM_WRITE: enable Host program ram write selection
*/
@@ -672,14 +719,20 @@
#define TBTT_TIMER 0x1124
/*
- * INT_TIMER_CFG:
+ * INT_TIMER_CFG: timer configuration
+ * PRE_TBTT_TIMER: leadtime to tbtt for pretbtt interrupt in units of 1/16 TU
+ * GP_TIMER: period of general purpose timer in units of 1/16 TU
*/
#define INT_TIMER_CFG 0x1128
+#define INT_TIMER_CFG_PRE_TBTT_TIMER FIELD32(0x0000ffff)
+#define INT_TIMER_CFG_GP_TIMER FIELD32(0xffff0000)
/*
* INT_TIMER_EN: GP-timer and pre-tbtt Int enable
*/
#define INT_TIMER_EN 0x112c
+#define INT_TIMER_EN_PRE_TBTT_TIMER FIELD32(0x00000001)
+#define INT_TIMER_EN_GP_TIMER FIELD32(0x00000002)
/*
* CH_IDLE_STA: channel idle time
@@ -756,6 +809,18 @@
#define EDCA_TID_AC_MAP 0x1310
/*
+ * TX_PWR_CFG:
+ */
+#define TX_PWR_CFG_RATE0 FIELD32(0x0000000f)
+#define TX_PWR_CFG_RATE1 FIELD32(0x000000f0)
+#define TX_PWR_CFG_RATE2 FIELD32(0x00000f00)
+#define TX_PWR_CFG_RATE3 FIELD32(0x0000f000)
+#define TX_PWR_CFG_RATE4 FIELD32(0x000f0000)
+#define TX_PWR_CFG_RATE5 FIELD32(0x00f00000)
+#define TX_PWR_CFG_RATE6 FIELD32(0x0f000000)
+#define TX_PWR_CFG_RATE7 FIELD32(0xf0000000)
+
+/*
* TX_PWR_CFG_0:
*/
#define TX_PWR_CFG_0 0x1314
@@ -1370,17 +1435,17 @@
struct mac_wcid_entry {
u8 mac[6];
u8 reserved[2];
-} __attribute__ ((packed));
+} __packed;
struct hw_key_entry {
u8 key[16];
u8 tx_mic[8];
u8 rx_mic[8];
-} __attribute__ ((packed));
+} __packed;
struct mac_iveiv_entry {
u8 iv[8];
-} __attribute__ ((packed));
+} __packed;
/*
* MAC_WCID_ATTRIBUTE:
@@ -1389,6 +1454,10 @@ struct mac_iveiv_entry {
#define MAC_WCID_ATTRIBUTE_CIPHER FIELD32(0x0000000e)
#define MAC_WCID_ATTRIBUTE_BSS_IDX FIELD32(0x00000070)
#define MAC_WCID_ATTRIBUTE_RX_WIUDF FIELD32(0x00000380)
+#define MAC_WCID_ATTRIBUTE_CIPHER_EXT FIELD32(0x00000400)
+#define MAC_WCID_ATTRIBUTE_BSS_IDX_EXT FIELD32(0x00000800)
+#define MAC_WCID_ATTRIBUTE_WAPI_MCBC FIELD32(0x00008000)
+#define MAC_WCID_ATTRIBUTE_WAPI_KEY_IDX FIELD32(0xff000000)
/*
* SHARED_KEY_MODE:
@@ -1510,7 +1579,9 @@ struct mac_iveiv_entry {
*/
/*
- * BBP 1: TX Antenna
+ * BBP 1: TX Antenna & Power
+ * POWER: 0 - normal, 1 - drop tx power by 6dBm, 2 - drop tx power by 12dBm,
+ * 3 - increase tx power by 6dBm
*/
#define BBP1_TX_POWER FIELD8(0x07)
#define BBP1_TX_ANTENNA FIELD8(0x18)
@@ -1800,9 +1871,15 @@ struct mac_iveiv_entry {
#define EEPROM_TXPOWER_A_2 FIELD16(0xff00)
/*
- * EEPROM TXpower byrate: 20MHZ power
+ * EEPROM TXPOWER by rate: tx power per tx rate for HT20 mode
*/
#define EEPROM_TXPOWER_BYRATE 0x006f
+#define EEPROM_TXPOWER_BYRATE_SIZE 9
+
+#define EEPROM_TXPOWER_BYRATE_RATE0 FIELD16(0x000f)
+#define EEPROM_TXPOWER_BYRATE_RATE1 FIELD16(0x00f0)
+#define EEPROM_TXPOWER_BYRATE_RATE2 FIELD16(0x0f00)
+#define EEPROM_TXPOWER_BYRATE_RATE3 FIELD16(0xf000)
/*
* EEPROM BBP.