6 files changed, 69 insertions, 23 deletions
diff --git a/drivers/pci/irq.c b/drivers/pci/irq.c
index e5f69a43b1b..b008cf86b9c 100644
--- a/drivers/pci/irq.c
+++ b/drivers/pci/irq.c
@@ -14,11 +14,11 @@ static void pci_note_irq_problem(struct pci_dev *pdev, const char *reason)
 {
 	struct pci_dev *parent = to_pci_dev(pdev->dev.parent);
 
-	dev_printk(KERN_ERR, &pdev->dev,
-		   "Potentially misrouted IRQ (Bridge %s %04x:%04x)\n",
-		   dev_name(&parent->dev), parent->vendor, parent->device);
-	dev_printk(KERN_ERR, &pdev->dev, "%s\n", reason);
-	dev_printk(KERN_ERR, &pdev->dev, "Please report to linux-kernel@vger.kernel.org\n");
+	dev_err(&pdev->dev,
+		"Potentially misrouted IRQ (Bridge %s %04x:%04x)\n",
+		dev_name(&parent->dev), parent->vendor, parent->device);
+	dev_err(&pdev->dev, "%s\n", reason);
+	dev_err(&pdev->dev, "Please report to linux-kernel@vger.kernel.org\n");
 	WARN_ON(1);
 }
 
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 94c6e2aa03d..11d9c8a9d0d 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -1023,10 +1023,10 @@ static int pci_pm_runtime_suspend(struct device *dev)
 		return 0;
 	}
 
-	if (!pci_dev->state_saved)
+	if (!pci_dev->state_saved) {
 		pci_save_state(pci_dev);
-
-	pci_finish_runtime_suspend(pci_dev);
+		pci_finish_runtime_suspend(pci_dev);
+	}
 
 	return 0;
 }
diff --git a/drivers/pci/pci-stub.c b/drivers/pci/pci-stub.c
index 775e933c222..6e47c519c51 100644
--- a/drivers/pci/pci-stub.c
+++ b/drivers/pci/pci-stub.c
@@ -28,7 +28,7 @@ MODULE_PARM_DESC(ids, "Initial PCI IDs to add to the stub driver, format is "
 
 static int pci_stub_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	dev_printk(KERN_INFO, &dev->dev, "claimed by stub\n");
+	dev_info(&dev->dev, "claimed by stub\n");
 	return 0;
 }
 
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 54858838f09..485cfa9af2e 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1578,15 +1578,25 @@ void pci_pme_active(struct pci_dev *dev, bool enable)
 
 	pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
 
-	/* PCI (as opposed to PCIe) PME requires that the device have
-	   its PME# line hooked up correctly. Not all hardware vendors
-	   do this, so the PME never gets delivered and the device
-	   remains asleep. The easiest way around this is to
-	   periodically walk the list of suspended devices and check
-	   whether any have their PME flag set. The assumption is that
-	   we'll wake up often enough anyway that this won't be a huge
-	   hit, and the power savings from the devices will still be a
-	   win. */
+	/*
+	 * PCI (as opposed to PCIe) PME requires that the device have
+	 * its PME# line hooked up correctly. Not all hardware vendors
+	 * do this, so the PME never gets delivered and the device
+	 * remains asleep. The easiest way around this is to
+	 * periodically walk the list of suspended devices and check
+	 * whether any have their PME flag set. The assumption is that
+	 * we'll wake up often enough anyway that this won't be a huge
+	 * hit, and the power savings from the devices will still be a
+	 * win.
+	 *
+	 * Although PCIe uses in-band PME message instead of PME# line
+	 * to report PME, PME does not work for some PCIe devices in
+	 * reality.  For example, there are devices that set their PME
+	 * status bits, but don't really bother to send a PME message;
+	 * there are PCI Express Root Ports that don't bother to
+	 * trigger interrupts when they receive PME messages from the
+	 * devices below.  So PME poll is used for PCIe devices too.
+	 */
 
 	if (dev->pme_poll) {
 		struct pci_pme_device *pme_dev;
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 213753b283a..3da9ecc9ab8 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -242,8 +242,7 @@ static void pcie_aspm_configure_common_clock(struct pcie_link_state *link)
 		return;
 
 	/* Training failed. Restore common clock configurations */
-	dev_printk(KERN_ERR, &parent->dev,
-		   "ASPM: Could not configure common clock\n");
+	dev_err(&parent->dev, "ASPM: Could not configure common clock\n");
 	list_for_each_entry(child, &linkbus->devices, bus_list)
 		pcie_capability_write_word(child, PCI_EXP_LNKCTL,
 					   child_reg[PCI_FUNC(child->devfn)]);
@@ -507,9 +506,7 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev)
 		 */
 		pcie_capability_read_dword(child, PCI_EXP_DEVCAP, &reg32);
 		if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) {
-			dev_printk(KERN_INFO, &child->dev, "disabling ASPM"
-				" on pre-1.1 PCIe device.  You can enable it"
-				" with 'pcie_aspm=force'\n");
+			dev_info(&child->dev, "disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'\n");
 			return -EINVAL;
 		}
 	}
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 7a451ff56ec..0c59f7aba12 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1790,6 +1790,45 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2,
 			 PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE,
 			 quirk_tc86c001_ide);
 
+/*
+ * PLX PCI 9050 PCI Target bridge controller has an errata that prevents the
+ * local configuration registers accessible via BAR0 (memory) or BAR1 (i/o)
+ * being read correctly if bit 7 of the base address is set.
+ * The BAR0 or BAR1 region may be disabled (size 0) or enabled (size 128).
+ * Re-allocate the regions to a 256-byte boundary if necessary.
+ */
+static void __devinit quirk_plx_pci9050(struct pci_dev *dev)
+{
+	unsigned int bar;
+
+	/* Fixed in revision 2 (PCI 9052). */
+	if (dev->revision >= 2)
+		return;
+	for (bar = 0; bar <= 1; bar++)
+		if (pci_resource_len(dev, bar) == 0x80 &&
+		    (pci_resource_start(dev, bar) & 0x80)) {
+			struct resource *r = &dev->resource[bar];
+			dev_info(&dev->dev,
+				 "Re-allocating PLX PCI 9050 BAR %u to length 256 to avoid bit 7 bug\n",
+				 bar);
+			r->start = 0;
+			r->end = 0xff;
+		}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+			 quirk_plx_pci9050);
+/*
+ * The following Meilhaus (vendor ID 0x1402) device IDs (amongst others)
+ * may be using the PLX PCI 9050: 0x0630, 0x0940, 0x0950, 0x0960, 0x100b,
+ * 0x1400, 0x140a, 0x140b, 0x14e0, 0x14ea, 0x14eb, 0x1604, 0x1608, 0x160c,
+ * 0x168f, 0x2000, 0x2600, 0x3000, 0x810a, 0x810b.
+ *
+ * Currently, device IDs 0x2000 and 0x2600 are used by the Comedi "me_daq"
+ * driver.
+ */
+DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2000, quirk_plx_pci9050);
+DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2600, quirk_plx_pci9050);
+
 static void __devinit quirk_netmos(struct pci_dev *dev)
 {
 	unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;