aboutsummaryrefslogtreecommitdiff
path: root/drivers/power
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/power')
-rw-r--r--drivers/power/Kconfig14
-rw-r--r--drivers/power/Makefile1
-rw-r--r--drivers/power/bq27x00_battery.c19
-rw-r--r--drivers/power/charger-manager.c4
-rw-r--r--drivers/power/ds2781_battery.c874
-rw-r--r--drivers/power/isp1704_charger.c106
-rw-r--r--drivers/power/lp8727_charger.c1
-rw-r--r--drivers/power/max8998_charger.c1
-rw-r--r--drivers/power/pda_power.c10
-rw-r--r--drivers/power/twl4030_charger.c20
10 files changed, 972 insertions, 78 deletions
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 3a8daf85874..459f66437fe 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -76,6 +76,20 @@ config BATTERY_DS2780
help
Say Y here to enable support for batteries with ds2780 chip.
+config BATTERY_DS2781
+ tristate "2781 battery driver"
+ depends on HAS_IOMEM
+ select W1
+ select W1_SLAVE_DS2781
+ help
+ If you enable this you will have the DS2781 battery driver support.
+
+ The battery monitor chip is used in many batteries/devices
+ as the one who is responsible for charging/discharging/monitoring
+ Li+ batteries.
+
+ If you are unsure, say N.
+
config BATTERY_DS2782
tristate "DS2782/DS2786 standalone gas-gauge"
depends on I2C
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index e429008eaf1..c590fa53340 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_TEST_POWER) += test_power.o
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o
+obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o
obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o
obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
index 98bf5676318..222ccd872ac 100644
--- a/drivers/power/bq27x00_battery.c
+++ b/drivers/power/bq27x00_battery.c
@@ -47,10 +47,10 @@
#define BQ27x00_REG_TTE 0x16
#define BQ27x00_REG_TTF 0x18
#define BQ27x00_REG_TTECP 0x26
-#define BQ27x00_REG_NAC 0x0C /* Nominal available capaciy */
+#define BQ27x00_REG_NAC 0x0C /* Nominal available capacity */
#define BQ27x00_REG_LMD 0x12 /* Last measured discharge */
#define BQ27x00_REG_CYCT 0x2A /* Cycle count total */
-#define BQ27x00_REG_AE 0x22 /* Available enery */
+#define BQ27x00_REG_AE 0x22 /* Available energy */
#define BQ27000_REG_RSOC 0x0B /* Relative State-of-Charge */
#define BQ27000_REG_ILMD 0x76 /* Initial last measured discharge */
@@ -62,11 +62,10 @@
#define BQ27500_REG_SOC 0x2C
#define BQ27500_REG_DCAP 0x3C /* Design capacity */
-#define BQ27500_FLAG_DSG BIT(0) /* Discharging */
+#define BQ27500_FLAG_DSC BIT(0)
#define BQ27500_FLAG_SOCF BIT(1) /* State-of-Charge threshold final */
#define BQ27500_FLAG_SOC1 BIT(2) /* State-of-Charge threshold 1 */
-#define BQ27500_FLAG_CHG BIT(8) /* Charging */
-#define BQ27500_FLAG_FC BIT(9) /* Fully charged */
+#define BQ27500_FLAG_FC BIT(9)
#define BQ27000_RS 20 /* Resistor sense */
@@ -312,7 +311,7 @@ static void bq27x00_update(struct bq27x00_device_info *di)
struct bq27x00_reg_cache cache = {0, };
bool is_bq27500 = di->chip == BQ27500;
- cache.flags = bq27x00_read(di, BQ27x00_REG_FLAGS, is_bq27500);
+ cache.flags = bq27x00_read(di, BQ27x00_REG_FLAGS, !is_bq27500);
if (cache.flags >= 0) {
if (!is_bq27500 && (cache.flags & BQ27000_FLAG_CI)) {
dev_info(di->dev, "battery is not calibrated! ignoring capacity values\n");
@@ -401,14 +400,10 @@ static int bq27x00_battery_status(struct bq27x00_device_info *di,
if (di->chip == BQ27500) {
if (di->cache.flags & BQ27500_FLAG_FC)
status = POWER_SUPPLY_STATUS_FULL;
- else if (di->cache.flags & BQ27500_FLAG_DSG)
+ else if (di->cache.flags & BQ27500_FLAG_DSC)
status = POWER_SUPPLY_STATUS_DISCHARGING;
- else if (di->cache.flags & BQ27500_FLAG_CHG)
- status = POWER_SUPPLY_STATUS_CHARGING;
- else if (power_supply_am_i_supplied(&di->bat))
- status = POWER_SUPPLY_STATUS_NOT_CHARGING;
else
- status = POWER_SUPPLY_STATUS_UNKNOWN;
+ status = POWER_SUPPLY_STATUS_CHARGING;
} else {
if (di->cache.flags & BQ27000_FLAG_FC)
status = POWER_SUPPLY_STATUS_FULL;
diff --git a/drivers/power/charger-manager.c b/drivers/power/charger-manager.c
index 0378d019efa..88fd9710bda 100644
--- a/drivers/power/charger-manager.c
+++ b/drivers/power/charger-manager.c
@@ -974,10 +974,11 @@ static int __devexit charger_manager_remove(struct platform_device *pdev)
return 0;
}
-const struct platform_device_id charger_manager_id[] = {
+static const struct platform_device_id charger_manager_id[] = {
{ "charger-manager", 0 },
{ },
};
+MODULE_DEVICE_TABLE(platform, charger_manager_id);
static int cm_suspend_prepare(struct device *dev)
{
@@ -1069,4 +1070,3 @@ module_exit(charger_manager_cleanup);
MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
MODULE_DESCRIPTION("Charger Manager");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("charger-manager");
diff --git a/drivers/power/ds2781_battery.c b/drivers/power/ds2781_battery.c
new file mode 100644
index 00000000000..ca0d653d0a7
--- /dev/null
+++ b/drivers/power/ds2781_battery.c
@@ -0,0 +1,874 @@
+/*
+ * 1-wire client/driver for the Maxim/Dallas DS2781 Stand-Alone Fuel Gauge IC
+ *
+ * Author: Renata Sayakhova <renata@oktetlabs.ru>
+ *
+ * Based on ds2780_battery drivers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/param.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/idr.h>
+
+#include "../w1/w1.h"
+#include "../w1/slaves/w1_ds2781.h"
+
+/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
+#define DS2781_CURRENT_UNITS 1563
+/* Charge unit measurement in uAh for a 1 milli-ohm sense resistor */
+#define DS2781_CHARGE_UNITS 6250
+/* Number of bytes in user EEPROM space */
+#define DS2781_USER_EEPROM_SIZE (DS2781_EEPROM_BLOCK0_END - \
+ DS2781_EEPROM_BLOCK0_START + 1)
+/* Number of bytes in parameter EEPROM space */
+#define DS2781_PARAM_EEPROM_SIZE (DS2781_EEPROM_BLOCK1_END - \
+ DS2781_EEPROM_BLOCK1_START + 1)
+
+struct ds2781_device_info {
+ struct device *dev;
+ struct power_supply bat;
+ struct device *w1_dev;
+ struct task_struct *mutex_holder;
+};
+
+enum current_types {
+ CURRENT_NOW,
+ CURRENT_AVG,
+};
+
+static const char model[] = "DS2781";
+static const char manufacturer[] = "Maxim/Dallas";
+
+static inline struct ds2781_device_info *
+to_ds2781_device_info(struct power_supply *psy)
+{
+ return container_of(psy, struct ds2781_device_info, bat);
+}
+
+static inline struct power_supply *to_power_supply(struct device *dev)
+{
+ return dev_get_drvdata(dev);
+}
+
+static inline int ds2781_battery_io(struct ds2781_device_info *dev_info,
+ char *buf, int addr, size_t count, int io)
+{
+ if (dev_info->mutex_holder == current)
+ return w1_ds2781_io_nolock(dev_info->w1_dev, buf, addr,
+ count, io);
+ else
+ return w1_ds2781_io(dev_info->w1_dev, buf, addr, count, io);
+}
+
+int w1_ds2781_read(struct ds2781_device_info *dev_info, char *buf,
+ int addr, size_t count)
+{
+ return ds2781_battery_io(dev_info, buf, addr, count, 0);
+}
+
+static inline int ds2781_read8(struct ds2781_device_info *dev_info, u8 *val,
+ int addr)
+{
+ return ds2781_battery_io(dev_info, val, addr, sizeof(u8), 0);
+}
+
+static int ds2781_read16(struct ds2781_device_info *dev_info, s16 *val,
+ int addr)
+{
+ int ret;
+ u8 raw[2];
+
+ ret = ds2781_battery_io(dev_info, raw, addr, sizeof(raw), 0);
+ if (ret < 0)
+ return ret;
+
+ *val = (raw[0] << 8) | raw[1];
+
+ return 0;
+}
+
+static inline int ds2781_read_block(struct ds2781_device_info *dev_info,
+ u8 *val, int addr, size_t count)
+{
+ return ds2781_battery_io(dev_info, val, addr, count, 0);
+}
+
+static inline int ds2781_write(struct ds2781_device_info *dev_info, u8 *val,
+ int addr, size_t count)
+{
+ return ds2781_battery_io(dev_info, val, addr, count, 1);
+}
+
+static inline int ds2781_store_eeprom(struct device *dev, int addr)
+{
+ return w1_ds2781_eeprom_cmd(dev, addr, W1_DS2781_COPY_DATA);
+}
+
+static inline int ds2781_recall_eeprom(struct device *dev, int addr)
+{
+ return w1_ds2781_eeprom_cmd(dev, addr, W1_DS2781_RECALL_DATA);
+}
+
+static int ds2781_save_eeprom(struct ds2781_device_info *dev_info, int reg)
+{
+ int ret;
+
+ ret = ds2781_store_eeprom(dev_info->w1_dev, reg);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2781_recall_eeprom(dev_info->w1_dev, reg);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+/* Set sense resistor value in mhos */
+static int ds2781_set_sense_register(struct ds2781_device_info *dev_info,
+ u8 conductance)
+{
+ int ret;
+
+ ret = ds2781_write(dev_info, &conductance,
+ DS2781_RSNSP, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ return ds2781_save_eeprom(dev_info, DS2781_RSNSP);
+}
+
+/* Get RSGAIN value from 0 to 1.999 in steps of 0.001 */
+static int ds2781_get_rsgain_register(struct ds2781_device_info *dev_info,
+ u16 *rsgain)
+{
+ return ds2781_read16(dev_info, rsgain, DS2781_RSGAIN_MSB);
+}
+
+/* Set RSGAIN value from 0 to 1.999 in steps of 0.001 */
+static int ds2781_set_rsgain_register(struct ds2781_device_info *dev_info,
+ u16 rsgain)
+{
+ int ret;
+ u8 raw[] = {rsgain >> 8, rsgain & 0xFF};
+
+ ret = ds2781_write(dev_info, raw,
+ DS2781_RSGAIN_MSB, sizeof(raw));
+ if (ret < 0)
+ return ret;
+
+ return ds2781_save_eeprom(dev_info, DS2781_RSGAIN_MSB);
+}
+
+static int ds2781_get_voltage(struct ds2781_device_info *dev_info,
+ int *voltage_uV)
+{
+ int ret;
+ char val[2];
+ int voltage_raw;
+
+ ret = w1_ds2781_read(dev_info, val, DS2781_VOLT_MSB, 2 * sizeof(u8));
+ if (ret < 0)
+ return ret;
+ /*
+ * The voltage value is located in 10 bits across the voltage MSB
+ * and LSB registers in two's compliment form
+ * Sign bit of the voltage value is in bit 7 of the voltage MSB register
+ * Bits 9 - 3 of the voltage value are in bits 6 - 0 of the
+ * voltage MSB register
+ * Bits 2 - 0 of the voltage value are in bits 7 - 5 of the
+ * voltage LSB register
+ */
+ voltage_raw = (val[0] << 3) |
+ (val[1] >> 5);
+
+ /* DS2781 reports voltage in units of 9.76mV, but the battery class
+ * reports in units of uV, so convert by multiplying by 9760. */
+ *voltage_uV = voltage_raw * 9760;
+
+ return 0;
+}
+
+static int ds2781_get_temperature(struct ds2781_device_info *dev_info,
+ int *temp)
+{
+ int ret;
+ char val[2];
+ int temp_raw;
+
+ ret = w1_ds2781_read(dev_info, val, DS2781_TEMP_MSB, 2 * sizeof(u8));
+ if (ret < 0)
+ return ret;
+ /*
+ * The temperature value is located in 10 bits across the temperature
+ * MSB and LSB registers in two's compliment form
+ * Sign bit of the temperature value is in bit 7 of the temperature
+ * MSB register
+ * Bits 9 - 3 of the temperature value are in bits 6 - 0 of the
+ * temperature MSB register
+ * Bits 2 - 0 of the temperature value are in bits 7 - 5 of the
+ * temperature LSB register
+ */
+ temp_raw = ((val[0]) << 3) |
+ (val[1] >> 5);
+ *temp = temp_raw + (temp_raw / 4);
+
+ return 0;
+}
+
+static int ds2781_get_current(struct ds2781_device_info *dev_info,
+ enum current_types type, int *current_uA)
+{
+ int ret, sense_res;
+ s16 current_raw;
+ u8 sense_res_raw, reg_msb;
+
+ /*
+ * The units of measurement for current are dependent on the value of
+ * the sense resistor.
+ */
+ ret = ds2781_read8(dev_info, &sense_res_raw, DS2781_RSNSP);
+ if (ret < 0)
+ return ret;
+
+ if (sense_res_raw == 0) {
+ dev_err(dev_info->dev, "sense resistor value is 0\n");
+ return -EINVAL;
+ }
+ sense_res = 1000 / sense_res_raw;
+
+ if (type == CURRENT_NOW)
+ reg_msb = DS2781_CURRENT_MSB;
+ else if (type == CURRENT_AVG)
+ reg_msb = DS2781_IAVG_MSB;
+ else
+ return -EINVAL;
+
+ /*
+ * The current value is located in 16 bits across the current MSB
+ * and LSB registers in two's compliment form
+ * Sign bit of the current value is in bit 7 of the current MSB register
+ * Bits 14 - 8 of the current value are in bits 6 - 0 of the current
+ * MSB register
+ * Bits 7 - 0 of the current value are in bits 7 - 0 of the current
+ * LSB register
+ */
+ ret = ds2781_read16(dev_info, &current_raw, reg_msb);
+ if (ret < 0)
+ return ret;
+
+ *current_uA = current_raw * (DS2781_CURRENT_UNITS / sense_res);
+ return 0;
+}
+
+static int ds2781_get_accumulated_current(struct ds2781_device_info *dev_info,
+ int *accumulated_current)
+{
+ int ret, sense_res;
+ s16 current_raw;
+ u8 sense_res_raw;
+
+ /*
+ * The units of measurement for accumulated current are dependent on
+ * the value of the sense resistor.
+ */
+ ret = ds2781_read8(dev_info, &sense_res_raw, DS2781_RSNSP);
+ if (ret < 0)
+ return ret;
+
+ if (sense_res_raw == 0) {
+ dev_err(dev_info->dev, "sense resistor value is 0\n");
+ return -EINVAL;
+ }
+ sense_res = 1000 / sense_res_raw;
+
+ /*
+ * The ACR value is located in 16 bits across the ACR MSB and
+ * LSB registers
+ * Bits 15 - 8 of the ACR value are in bits 7 - 0 of the ACR
+ * MSB register
+ * Bits 7 - 0 of the ACR value are in bits 7 - 0 of the ACR
+ * LSB register
+ */
+ ret = ds2781_read16(dev_info, &current_raw, DS2781_ACR_MSB);
+ if (ret < 0)
+ return ret;
+
+ *accumulated_current = current_raw * (DS2781_CHARGE_UNITS / sense_res);
+ return 0;
+}
+
+static int ds2781_get_capacity(struct ds2781_device_info *dev_info,
+ int *capacity)
+{
+ int ret;
+ u8 raw;
+
+ ret = ds2781_read8(dev_info, &raw, DS2781_RARC);
+ if (ret < 0)
+ return ret;
+
+ *capacity = raw;
+ return 0;
+}
+
+static int ds2781_get_status(struct ds2781_device_info *dev_info, int *status)
+{
+ int ret, current_uA, capacity;
+
+ ret = ds2781_get_current(dev_info, CURRENT_NOW, &current_uA);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2781_get_capacity(dev_info, &capacity);
+ if (ret < 0)
+ return ret;
+
+ if (power_supply_am_i_supplied(&dev_info->bat)) {
+ if (capacity == 100)
+ *status = POWER_SUPPLY_STATUS_FULL;
+ else if (current_uA > 50000)
+ *status = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ *status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ } else {
+ *status = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+ return 0;
+}
+
+static int ds2781_get_charge_now(struct ds2781_device_info *dev_info,
+ int *charge_now)
+{
+ int ret;
+ u16 charge_raw;
+
+ /*
+ * The RAAC value is located in 16 bits across the RAAC MSB and
+ * LSB registers
+ * Bits 15 - 8 of the RAAC value are in bits 7 - 0 of the RAAC
+ * MSB register
+ * Bits 7 - 0 of the RAAC value are in bits 7 - 0 of the RAAC
+ * LSB register
+ */
+ ret = ds2781_read16(dev_info, &charge_raw, DS2781_RAAC_MSB);
+ if (ret < 0)
+ return ret;
+
+ *charge_now = charge_raw * 1600;
+ return 0;
+}
+
+static int ds2781_get_control_register(struct ds2781_device_info *dev_info,
+ u8 *control_reg)
+{
+ return ds2781_read8(dev_info, control_reg, DS2781_CONTROL);
+}
+
+static int ds2781_set_control_register(struct ds2781_device_info *dev_info,
+ u8 control_reg)
+{
+ int ret;
+
+ ret = ds2781_write(dev_info, &control_reg,
+ DS2781_CONTROL, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ return ds2781_save_eeprom(dev_info, DS2781_CONTROL);
+}
+
+static int ds2781_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret = 0;
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = ds2781_get_voltage(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_TEMP:
+ ret = ds2781_get_temperature(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = model;
+ break;
+
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = manufacturer;
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = ds2781_get_current(dev_info, CURRENT_NOW, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ ret = ds2781_get_current(dev_info, CURRENT_AVG, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = ds2781_get_status(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = ds2781_get_capacity(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+ ret = ds2781_get_accumulated_current(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ ret = ds2781_get_charge_now(dev_info, &val->intval);
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property ds2781_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+};
+
+static ssize_t ds2781_get_pmod_enabled(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 control_reg;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ /* Get power mode */
+ ret = ds2781_get_control_register(dev_info, &control_reg);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n",
+ !!(control_reg & DS2781_CONTROL_PMOD));
+}
+
+static ssize_t ds2781_set_pmod_enabled(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u8 control_reg, new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ /* Set power mode */
+ ret = ds2781_get_control_register(dev_info, &control_reg);
+ if (ret < 0)
+ return ret;
+
+ ret = kstrtou8(buf, 0, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ if ((new_setting != 0) && (new_setting != 1)) {
+ dev_err(dev_info->dev, "Invalid pmod setting (0 or 1)\n");
+ return -EINVAL;
+ }
+
+ if (new_setting)
+ control_reg |= DS2781_CONTROL_PMOD;
+ else
+ control_reg &= ~DS2781_CONTROL_PMOD;
+
+ ret = ds2781_set_control_register(dev_info, control_reg);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2781_get_sense_resistor_value(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 sense_resistor;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ ret = ds2781_read8(dev_info, &sense_resistor, DS2781_RSNSP);
+ if (ret < 0)
+ return ret;
+
+ ret = sprintf(buf, "%d\n", sense_resistor);
+ return ret;
+}
+
+static ssize_t ds2781_set_sense_resistor_value(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u8 new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ ret = kstrtou8(buf, 0, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2781_set_sense_register(dev_info, new_setting);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2781_get_rsgain_setting(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u16 rsgain;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ ret = ds2781_get_rsgain_register(dev_info, &rsgain);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", rsgain);
+}
+
+static ssize_t ds2781_set_rsgain_setting(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u16 new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ ret = kstrtou16(buf, 0, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ /* Gain can only be from 0 to 1.999 in steps of .001 */
+ if (new_setting > 1999) {
+ dev_err(dev_info->dev, "Invalid rsgain setting (0 - 1999)\n");
+ return -EINVAL;
+ }
+
+ ret = ds2781_set_rsgain_register(dev_info, new_setting);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2781_get_pio_pin(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 sfr;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ ret = ds2781_read8(dev_info, &sfr, DS2781_SFR);
+ if (ret < 0)
+ return ret;
+
+ ret = sprintf(buf, "%d\n", sfr & DS2781_SFR_PIOSC);
+ return ret;
+}
+
+static ssize_t ds2781_set_pio_pin(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u8 new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ ret = kstrtou8(buf, 0, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ if ((new_setting != 0) && (new_setting != 1)) {
+ dev_err(dev_info->dev, "Invalid pio_pin setting (0 or 1)\n");
+ return -EINVAL;
+ }
+
+ ret = ds2781_write(dev_info, &new_setting,
+ DS2781_SFR, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2781_read_param_eeprom_bin(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ count = min_t(loff_t, count,
+ DS2781_EEPROM_BLOCK1_END -
+ DS2781_EEPROM_BLOCK1_START + 1 - off);
+
+ return ds2781_read_block(dev_info, buf,
+ DS2781_EEPROM_BLOCK1_START + off, count);
+}
+
+static ssize_t ds2781_write_param_eeprom_bin(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+ int ret;
+
+ count = min_t(loff_t, count,
+ DS2781_EEPROM_BLOCK1_END -
+ DS2781_EEPROM_BLOCK1_START + 1 - off);
+
+ ret = ds2781_write(dev_info, buf,
+ DS2781_EEPROM_BLOCK1_START + off, count);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2781_save_eeprom(dev_info, DS2781_EEPROM_BLOCK1_START);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static struct bin_attribute ds2781_param_eeprom_bin_attr = {
+ .attr = {
+ .name = "param_eeprom",
+ .mode = S_IRUGO | S_IWUSR,
+ },
+ .size = DS2781_EEPROM_BLOCK1_END - DS2781_EEPROM_BLOCK1_START + 1,
+ .read = ds2781_read_param_eeprom_bin,
+ .write = ds2781_write_param_eeprom_bin,
+};
+
+static ssize_t ds2781_read_user_eeprom_bin(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ count = min_t(loff_t, count,
+ DS2781_EEPROM_BLOCK0_END -
+ DS2781_EEPROM_BLOCK0_START + 1 - off);
+
+ return ds2781_read_block(dev_info, buf,
+ DS2781_EEPROM_BLOCK0_START + off, count);
+
+}
+
+static ssize_t ds2781_write_user_eeprom_bin(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+ int ret;
+
+ count = min_t(loff_t, count,
+ DS2781_EEPROM_BLOCK0_END -
+ DS2781_EEPROM_BLOCK0_START + 1 - off);
+
+ ret = ds2781_write(dev_info, buf,
+ DS2781_EEPROM_BLOCK0_START + off, count);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2781_save_eeprom(dev_info, DS2781_EEPROM_BLOCK0_START);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static struct bin_attribute ds2781_user_eeprom_bin_attr = {
+ .attr = {
+ .name = "user_eeprom",
+ .mode = S_IRUGO | S_IWUSR,
+ },
+ .size = DS2781_EEPROM_BLOCK0_END - DS2781_EEPROM_BLOCK0_START + 1,
+ .read = ds2781_read_user_eeprom_bin,
+ .write = ds2781_write_user_eeprom_bin,
+};
+
+static DEVICE_ATTR(pmod_enabled, S_IRUGO | S_IWUSR, ds2781_get_pmod_enabled,
+ ds2781_set_pmod_enabled);
+static DEVICE_ATTR(sense_resistor_value, S_IRUGO | S_IWUSR,
+ ds2781_get_sense_resistor_value, ds2781_set_sense_resistor_value);
+static DEVICE_ATTR(rsgain_setting, S_IRUGO | S_IWUSR, ds2781_get_rsgain_setting,
+ ds2781_set_rsgain_setting);
+static DEVICE_ATTR(pio_pin, S_IRUGO | S_IWUSR, ds2781_get_pio_pin,
+ ds2781_set_pio_pin);
+
+
+static struct attribute *ds2781_attributes[] = {
+ &dev_attr_pmod_enabled.attr,
+ &dev_attr_sense_resistor_value.attr,
+ &dev_attr_rsgain_setting.attr,
+ &dev_attr_pio_pin.attr,
+ NULL
+};
+
+static const struct attribute_group ds2781_attr_group = {
+ .attrs = ds2781_attributes,
+};
+
+static int __devinit ds2781_battery_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct ds2781_device_info *dev_info;
+
+ dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL);
+ if (!dev_info) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ platform_set_drvdata(pdev, dev_info);
+
+ dev_info->dev = &pdev->dev;
+ dev_info->w1_dev = pdev->dev.parent;
+ dev_info->bat.name = dev_name(&pdev->dev);
+ dev_info->bat.type = POWER_SUPPLY_TYPE_BATTERY;
+ dev_info->bat.properties = ds2781_battery_props;
+ dev_info->bat.num_properties = ARRAY_SIZE(ds2781_battery_props);
+ dev_info->bat.get_property = ds2781_battery_get_property;
+ dev_info->mutex_holder = current;
+
+ ret = power_supply_register(&pdev->dev, &dev_info->bat);
+ if (ret) {
+ dev_err(dev_info->dev, "failed to register battery\n");
+ goto fail_free_info;
+ }
+
+ ret = sysfs_create_group(&dev_info->bat.dev->kobj, &ds2781_attr_group);
+ if (ret) {
+ dev_err(dev_info->dev, "failed to create sysfs group\n");
+ goto fail_unregister;
+ }
+
+ ret = sysfs_create_bin_file(&dev_info->bat.dev->kobj,
+ &ds2781_param_eeprom_bin_attr);
+ if (ret) {
+ dev_err(dev_info->dev,
+ "failed to create param eeprom bin file");
+ goto fail_remove_group;
+ }
+
+ ret = sysfs_create_bin_file(&dev_info->bat.dev->kobj,
+ &ds2781_user_eeprom_bin_attr);
+ if (ret) {
+ dev_err(dev_info->dev,
+ "failed to create user eeprom bin file");
+ goto fail_remove_bin_file;
+ }
+
+ dev_info->mutex_holder = NULL;
+
+ return 0;
+
+fail_remove_bin_file:
+ sysfs_remove_bin_file(&dev_info->bat.dev->kobj,
+ &ds2781_param_eeprom_bin_attr);
+fail_remove_group:
+ sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2781_attr_group);
+fail_unregister:
+ power_supply_unregister(&dev_info->bat);
+fail_free_info:
+ kfree(dev_info);
+fail:
+ return ret;
+}
+
+static int __devexit ds2781_battery_remove(struct platform_device *pdev)
+{
+ struct ds2781_device_info *dev_info = platform_get_drvdata(pdev);
+
+ dev_info->mutex_holder = current;
+
+ /* remove attributes */
+ sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2781_attr_group);
+
+ power_supply_unregister(&dev_info->bat);
+
+ kfree(dev_info);
+ return 0;
+}
+
+static struct platform_driver ds2781_battery_driver = {
+ .driver = {
+ .name = "ds2781-battery",
+ },
+ .probe = ds2781_battery_probe,
+ .remove = __devexit_p(ds2781_battery_remove),
+};
+
+static int __init ds2781_battery_init(void)
+{
+ return platform_driver_register(&ds2781_battery_driver);
+}
+
+static void __exit ds2781_battery_exit(void)
+{
+ platform_driver_unregister(&ds2781_battery_driver);
+}
+
+module_init(ds2781_battery_init);
+module_exit(ds2781_battery_exit);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Renata Sayakhova <renata@oktetlabs.ru>");
+MODULE_DESCRIPTION("Maxim/Dallas DS2781 Stand-Alone Fuel Gauage IC driver");
+MODULE_ALIAS("platform:ds2781-battery");
+
diff --git a/drivers/power/isp1704_charger.c b/drivers/power/isp1704_charger.c
index b806667b59a..1289a5f790a 100644
--- a/drivers/power/isp1704_charger.c
+++ b/drivers/power/isp1704_charger.c
@@ -56,7 +56,7 @@ static u16 isp170x_id[] = {
struct isp1704_charger {
struct device *dev;
struct power_supply psy;
- struct otg_transceiver *otg;
+ struct usb_phy *phy;
struct notifier_block nb;
struct work_struct work;
@@ -71,6 +71,16 @@ struct isp1704_charger {
unsigned max_power;
};
+static inline int isp1704_read(struct isp1704_charger *isp, u32 reg)
+{
+ return usb_phy_io_read(isp->phy, reg);
+}
+
+static inline int isp1704_write(struct isp1704_charger *isp, u32 val, u32 reg)
+{
+ return usb_phy_io_write(isp->phy, val, reg);
+}
+
/*
* Disable/enable the power from the isp1704 if a function for it
* has been provided with platform data.
@@ -97,31 +107,31 @@ static inline int isp1704_charger_type(struct isp1704_charger *isp)
u8 otg_ctrl;
int type = POWER_SUPPLY_TYPE_USB_DCP;
- func_ctrl = otg_io_read(isp->otg, ULPI_FUNC_CTRL);
- otg_ctrl = otg_io_read(isp->otg, ULPI_OTG_CTRL);
+ func_ctrl = isp1704_read(isp, ULPI_FUNC_CTRL);
+ otg_ctrl = isp1704_read(isp, ULPI_OTG_CTRL);
/* disable pulldowns */
reg = ULPI_OTG_CTRL_DM_PULLDOWN | ULPI_OTG_CTRL_DP_PULLDOWN;
- otg_io_write(isp->otg, ULPI_CLR(ULPI_OTG_CTRL), reg);
+ isp1704_write(isp, ULPI_CLR(ULPI_OTG_CTRL), reg);
/* full speed */
- otg_io_write(isp->otg, ULPI_CLR(ULPI_FUNC_CTRL),
+ isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL),
ULPI_FUNC_CTRL_XCVRSEL_MASK);
- otg_io_write(isp->otg, ULPI_SET(ULPI_FUNC_CTRL),
+ isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL),
ULPI_FUNC_CTRL_FULL_SPEED);
/* Enable strong pull-up on DP (1.5K) and reset */
reg = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET;
- otg_io_write(isp->otg, ULPI_SET(ULPI_FUNC_CTRL), reg);
+ isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL), reg);
usleep_range(1000, 2000);
- reg = otg_io_read(isp->otg, ULPI_DEBUG);
+ reg = isp1704_read(isp, ULPI_DEBUG);
if ((reg & 3) != 3)
type = POWER_SUPPLY_TYPE_USB_CDP;
/* recover original state */
- otg_io_write(isp->otg, ULPI_FUNC_CTRL, func_ctrl);
- otg_io_write(isp->otg, ULPI_OTG_CTRL, otg_ctrl);
+ isp1704_write(isp, ULPI_FUNC_CTRL, func_ctrl);
+ isp1704_write(isp, ULPI_OTG_CTRL, otg_ctrl);
return type;
}
@@ -136,28 +146,28 @@ static inline int isp1704_charger_verify(struct isp1704_charger *isp)
u8 r;
/* Reset the transceiver */
- r = otg_io_read(isp->otg, ULPI_FUNC_CTRL);
+ r = isp1704_read(isp, ULPI_FUNC_CTRL);
r |= ULPI_FUNC_CTRL_RESET;
- otg_io_write(isp->otg, ULPI_FUNC_CTRL, r);
+ isp1704_write(isp, ULPI_FUNC_CTRL, r);
usleep_range(1000, 2000);
/* Set normal mode */
r &= ~(ULPI_FUNC_CTRL_RESET | ULPI_FUNC_CTRL_OPMODE_MASK);
- otg_io_write(isp->otg, ULPI_FUNC_CTRL, r);
+ isp1704_write(isp, ULPI_FUNC_CTRL, r);
/* Clear the DP and DM pull-down bits */
r = ULPI_OTG_CTRL_DP_PULLDOWN | ULPI_OTG_CTRL_DM_PULLDOWN;
- otg_io_write(isp->otg, ULPI_CLR(ULPI_OTG_CTRL), r);
+ isp1704_write(isp, ULPI_CLR(ULPI_OTG_CTRL), r);
/* Enable strong pull-up on DP (1.5K) and reset */
r = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET;
- otg_io_write(isp->otg, ULPI_SET(ULPI_FUNC_CTRL), r);
+ isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL), r);
usleep_range(1000, 2000);
/* Read the line state */
- if (!otg_io_read(isp->otg, ULPI_DEBUG)) {
+ if (!isp1704_read(isp, ULPI_DEBUG)) {
/* Disable strong pull-up on DP (1.5K) */
- otg_io_write(isp->otg, ULPI_CLR(ULPI_FUNC_CTRL),
+ isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL),
ULPI_FUNC_CTRL_TERMSELECT);
return 1;
}
@@ -165,23 +175,23 @@ static inline int isp1704_charger_verify(struct isp1704_charger *isp)
/* Is it a charger or PS/2 connection */
/* Enable weak pull-up resistor on DP */
- otg_io_write(isp->otg, ULPI_SET(ISP1704_PWR_CTRL),
+ isp1704_write(isp, ULPI_SET(ISP1704_PWR_CTRL),
ISP1704_PWR_CTRL_DP_WKPU_EN);
/* Disable strong pull-up on DP (1.5K) */
- otg_io_write(isp->otg, ULPI_CLR(ULPI_FUNC_CTRL),
+ isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL),
ULPI_FUNC_CTRL_TERMSELECT);
/* Enable weak pull-down resistor on DM */
- otg_io_write(isp->otg, ULPI_SET(ULPI_OTG_CTRL),
+ isp1704_write(isp, ULPI_SET(ULPI_OTG_CTRL),
ULPI_OTG_CTRL_DM_PULLDOWN);
/* It's a charger if the line states are clear */
- if (!(otg_io_read(isp->otg, ULPI_DEBUG)))
+ if (!(isp1704_read(isp, ULPI_DEBUG)))
ret = 1;
/* Disable weak pull-up resistor on DP */
- otg_io_write(isp->otg, ULPI_CLR(ISP1704_PWR_CTRL),
+ isp1704_write(isp, ULPI_CLR(ISP1704_PWR_CTRL),
ISP1704_PWR_CTRL_DP_WKPU_EN);
return ret;
@@ -193,14 +203,14 @@ static inline int isp1704_charger_detect(struct isp1704_charger *isp)
u8 pwr_ctrl;
int ret = 0;
- pwr_ctrl = otg_io_read(isp->otg, ISP1704_PWR_CTRL);
+ pwr_ctrl = isp1704_read(isp, ISP1704_PWR_CTRL);
/* set SW control bit in PWR_CTRL register */
- otg_io_write(isp->otg, ISP1704_PWR_CTRL,
+ isp1704_write(isp, ISP1704_PWR_CTRL,
ISP1704_PWR_CTRL_SWCTRL);
/* enable manual charger detection */
- otg_io_write(isp->otg, ULPI_SET(ISP1704_PWR_CTRL),
+ isp1704_write(isp, ULPI_SET(ISP1704_PWR_CTRL),
ISP1704_PWR_CTRL_SWCTRL
| ISP1704_PWR_CTRL_DPVSRC_EN);
usleep_range(1000, 2000);
@@ -208,7 +218,7 @@ static inline int isp1704_charger_detect(struct isp1704_charger *isp)
timeout = jiffies + msecs_to_jiffies(300);
do {
/* Check if there is a charger */
- if (otg_io_read(isp->otg, ISP1704_PWR_CTRL)
+ if (isp1704_read(isp, ISP1704_PWR_CTRL)
& ISP1704_PWR_CTRL_VDAT_DET) {
ret = isp1704_charger_verify(isp);
break;
@@ -216,7 +226,7 @@ static inline int isp1704_charger_detect(struct isp1704_charger *isp)
} while (!time_after(jiffies, timeout) && isp->online);
/* recover original state */
- otg_io_write(isp->otg, ISP1704_PWR_CTRL, pwr_ctrl);
+ isp1704_write(isp, ISP1704_PWR_CTRL, pwr_ctrl);
return ret;
}
@@ -264,8 +274,8 @@ static void isp1704_charger_work(struct work_struct *data)
case POWER_SUPPLY_TYPE_USB:
default:
/* enable data pullups */
- if (isp->otg->gadget)
- usb_gadget_connect(isp->otg->gadget);
+ if (isp->phy->otg->gadget)
+ usb_gadget_connect(isp->phy->otg->gadget);
}
break;
case USB_EVENT_NONE:
@@ -283,8 +293,8 @@ static void isp1704_charger_work(struct work_struct *data)
* chargers. The pullups may be enabled elsewhere, so this can
* not be the final solution.
*/
- if (isp->otg->gadget)
- usb_gadget_disconnect(isp->otg->gadget);
+ if (isp->phy->otg->gadget)
+ usb_gadget_disconnect(isp->phy->otg->gadget);
isp1704_charger_set_power(isp, 0);
break;
@@ -364,11 +374,11 @@ static inline int isp1704_test_ulpi(struct isp1704_charger *isp)
int ret = -ENODEV;
/* Test ULPI interface */
- ret = otg_io_write(isp->otg, ULPI_SCRATCH, 0xaa);
+ ret = isp1704_write(isp, ULPI_SCRATCH, 0xaa);
if (ret < 0)
return ret;
- ret = otg_io_read(isp->otg, ULPI_SCRATCH);
+ ret = isp1704_read(isp, ULPI_SCRATCH);
if (ret < 0)
return ret;
@@ -376,13 +386,13 @@ static inline int isp1704_test_ulpi(struct isp1704_charger *isp)
return -ENODEV;
/* Verify the product and vendor id matches */
- vendor = otg_io_read(isp->otg, ULPI_VENDOR_ID_LOW);
- vendor |= otg_io_read(isp->otg, ULPI_VENDOR_ID_HIGH) << 8;
+ vendor = isp1704_read(isp, ULPI_VENDOR_ID_LOW);
+ vendor |= isp1704_read(isp, ULPI_VENDOR_ID_HIGH) << 8;
if (vendor != NXP_VENDOR_ID)
return -ENODEV;
- product = otg_io_read(isp->otg, ULPI_PRODUCT_ID_LOW);
- product |= otg_io_read(isp->otg, ULPI_PRODUCT_ID_HIGH) << 8;
+ product = isp1704_read(isp, ULPI_PRODUCT_ID_LOW);
+ product |= isp1704_read(isp, ULPI_PRODUCT_ID_HIGH) << 8;
for (i = 0; i < ARRAY_SIZE(isp170x_id); i++) {
if (product == isp170x_id[i]) {
@@ -405,8 +415,8 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev)
if (!isp)
return -ENOMEM;
- isp->otg = otg_get_transceiver();
- if (!isp->otg)
+ isp->phy = usb_get_transceiver();
+ if (!isp->phy)
goto fail0;
isp->dev = &pdev->dev;
@@ -429,14 +439,14 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev)
goto fail1;
/*
- * REVISIT: using work in order to allow the otg notifications to be
+ * REVISIT: using work in order to allow the usb notifications to be
* made atomically in the future.
*/
INIT_WORK(&isp->work, isp1704_charger_work);
isp->nb.notifier_call = isp1704_notifier_call;
- ret = otg_register_notifier(isp->otg, &isp->nb);
+ ret = usb_register_notifier(isp->phy, &isp->nb);
if (ret)
goto fail2;
@@ -449,13 +459,13 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev)
* enumerated. The charger driver should be always loaded before any
* gadget is loaded.
*/
- if (isp->otg->gadget)
- usb_gadget_disconnect(isp->otg->gadget);
+ if (isp->phy->otg->gadget)
+ usb_gadget_disconnect(isp->phy->otg->gadget);
/* Detect charger if VBUS is valid (the cable was already plugged). */
- ret = otg_io_read(isp->otg, ULPI_USB_INT_STS);
+ ret = isp1704_read(isp, ULPI_USB_INT_STS);
isp1704_charger_set_power(isp, 0);
- if ((ret & ULPI_INT_VBUS_VALID) && !isp->otg->default_a) {
+ if ((ret & ULPI_INT_VBUS_VALID) && !isp->phy->otg->default_a) {
isp->event = USB_EVENT_VBUS;
schedule_work(&isp->work);
}
@@ -464,7 +474,7 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev)
fail2:
power_supply_unregister(&isp->psy);
fail1:
- otg_put_transceiver(isp->otg);
+ usb_put_transceiver(isp->phy);
fail0:
kfree(isp);
@@ -477,9 +487,9 @@ static int __devexit isp1704_charger_remove(struct platform_device *pdev)
{
struct isp1704_charger *isp = platform_get_drvdata(pdev);
- otg_unregister_notifier(isp->otg, &isp->nb);
+ usb_unregister_notifier(isp->phy, &isp->nb);
power_supply_unregister(&isp->psy);
- otg_put_transceiver(isp->otg);
+ usb_put_transceiver(isp->phy);
isp1704_charger_set_power(isp, 0);
kfree(isp);
diff --git a/drivers/power/lp8727_charger.c b/drivers/power/lp8727_charger.c
index b15b575c070..c53dd1292f8 100644
--- a/drivers/power/lp8727_charger.c
+++ b/drivers/power/lp8727_charger.c
@@ -464,6 +464,7 @@ static int __devexit lp8727_remove(struct i2c_client *cl)
static const struct i2c_device_id lp8727_ids[] = {
{"lp8727", 0},
+ { }
};
static struct i2c_driver lp8727_driver = {
diff --git a/drivers/power/max8998_charger.c b/drivers/power/max8998_charger.c
index 9b3f2bf56e7..6dc01c25559 100644
--- a/drivers/power/max8998_charger.c
+++ b/drivers/power/max8998_charger.c
@@ -19,7 +19,6 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/module.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/slab.h>
diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c
index fd49689738a..214468f4444 100644
--- a/drivers/power/pda_power.c
+++ b/drivers/power/pda_power.c
@@ -40,7 +40,7 @@ static struct timer_list polling_timer;
static int polling;
#ifdef CONFIG_USB_OTG_UTILS
-static struct otg_transceiver *transceiver;
+static struct usb_phy *transceiver;
static struct notifier_block otg_nb;
#endif
@@ -321,7 +321,7 @@ static int pda_power_probe(struct platform_device *pdev)
}
#ifdef CONFIG_USB_OTG_UTILS
- transceiver = otg_get_transceiver();
+ transceiver = usb_get_transceiver();
if (transceiver && !pdata->is_usb_online) {
pdata->is_usb_online = otg_is_usb_online;
}
@@ -375,7 +375,7 @@ static int pda_power_probe(struct platform_device *pdev)
#ifdef CONFIG_USB_OTG_UTILS
if (transceiver && pdata->use_otg_notifier) {
otg_nb.notifier_call = otg_handle_notification;
- ret = otg_register_notifier(transceiver, &otg_nb);
+ ret = usb_register_notifier(transceiver, &otg_nb);
if (ret) {
dev_err(dev, "failure to register otg notifier\n");
goto otg_reg_notifier_failed;
@@ -409,7 +409,7 @@ usb_supply_failed:
free_irq(ac_irq->start, &pda_psy_ac);
#ifdef CONFIG_USB_OTG_UTILS
if (transceiver)
- otg_put_transceiver(transceiver);
+ usb_put_transceiver(transceiver);
#endif
ac_irq_failed:
if (pdata->is_ac_online)
@@ -444,7 +444,7 @@ static int pda_power_remove(struct platform_device *pdev)
power_supply_unregister(&pda_psy_ac);
#ifdef CONFIG_USB_OTG_UTILS
if (transceiver)
- otg_put_transceiver(transceiver);
+ usb_put_transceiver(transceiver);
#endif
if (ac_draw) {
regulator_put(ac_draw);
diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c
index 54b9198fa57..fdad850c77d 100644
--- a/drivers/power/twl4030_charger.c
+++ b/drivers/power/twl4030_charger.c
@@ -69,8 +69,8 @@ struct twl4030_bci {
struct device *dev;
struct power_supply ac;
struct power_supply usb;
- struct otg_transceiver *transceiver;
- struct notifier_block otg_nb;
+ struct usb_phy *transceiver;
+ struct notifier_block usb_nb;
struct work_struct work;
int irq_chg;
int irq_bci;
@@ -279,7 +279,7 @@ static void twl4030_bci_usb_work(struct work_struct *data)
static int twl4030_bci_usb_ncb(struct notifier_block *nb, unsigned long val,
void *priv)
{
- struct twl4030_bci *bci = container_of(nb, struct twl4030_bci, otg_nb);
+ struct twl4030_bci *bci = container_of(nb, struct twl4030_bci, usb_nb);
dev_dbg(bci->dev, "OTG notify %lu\n", val);
@@ -479,10 +479,10 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
INIT_WORK(&bci->work, twl4030_bci_usb_work);
- bci->transceiver = otg_get_transceiver();
+ bci->transceiver = usb_get_transceiver();
if (bci->transceiver != NULL) {
- bci->otg_nb.notifier_call = twl4030_bci_usb_ncb;
- otg_register_notifier(bci->transceiver, &bci->otg_nb);
+ bci->usb_nb.notifier_call = twl4030_bci_usb_ncb;
+ usb_register_notifier(bci->transceiver, &bci->usb_nb);
}
/* Enable interrupts now. */
@@ -508,8 +508,8 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
fail_unmask_interrupts:
if (bci->transceiver != NULL) {
- otg_unregister_notifier(bci->transceiver, &bci->otg_nb);
- otg_put_transceiver(bci->transceiver);
+ usb_unregister_notifier(bci->transceiver, &bci->usb_nb);
+ usb_put_transceiver(bci->transceiver);
}
free_irq(bci->irq_bci, bci);
fail_bci_irq:
@@ -539,8 +539,8 @@ static int __exit twl4030_bci_remove(struct platform_device *pdev)
TWL4030_INTERRUPTS_BCIIMR2A);
if (bci->transceiver != NULL) {
- otg_unregister_notifier(bci->transceiver, &bci->otg_nb);
- otg_put_transceiver(bci->transceiver);
+ usb_unregister_notifier(bci->transceiver, &bci->usb_nb);
+ usb_put_transceiver(bci->transceiver);
}
free_irq(bci->irq_bci, bci);
free_irq(bci->irq_chg, bci);
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-11 00:57:57 +0000