aboutsummaryrefslogtreecommitdiff
path: root/drivers/rapidio/rio-scan.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/rapidio/rio-scan.c')
-rw-r--r--drivers/rapidio/rio-scan.c190
1 files changed, 60 insertions, 130 deletions
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index a965acd3c0e..4c15dbf8108 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -37,12 +37,8 @@
#include "rio.h"
-LIST_HEAD(rio_devices);
-
static void rio_init_em(struct rio_dev *rdev);
-DEFINE_SPINLOCK(rio_global_list_lock);
-
static int next_destid = 0;
static int next_comptag = 1;
@@ -327,127 +323,6 @@ static int rio_is_switch(struct rio_dev *rdev)
}
/**
- * rio_switch_init - Sets switch operations for a particular vendor switch
- * @rdev: RIO device
- * @do_enum: Enumeration/Discovery mode flag
- *
- * Searches the RIO switch ops table for known switch types. If the vid
- * and did match a switch table entry, then call switch initialization
- * routine to setup switch-specific routines.
- */
-static void rio_switch_init(struct rio_dev *rdev, int do_enum)
-{
- struct rio_switch_ops *cur = __start_rio_switch_ops;
- struct rio_switch_ops *end = __end_rio_switch_ops;
-
- while (cur < end) {
- if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) {
- pr_debug("RIO: calling init routine for %s\n",
- rio_name(rdev));
- cur->init_hook(rdev, do_enum);
- break;
- }
- cur++;
- }
-
- if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) {
- pr_debug("RIO: adding STD routing ops for %s\n",
- rio_name(rdev));
- rdev->rswitch->add_entry = rio_std_route_add_entry;
- rdev->rswitch->get_entry = rio_std_route_get_entry;
- rdev->rswitch->clr_table = rio_std_route_clr_table;
- }
-
- if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry)
- printk(KERN_ERR "RIO: missing routing ops for %s\n",
- rio_name(rdev));
-}
-
-/**
- * rio_add_device- Adds a RIO device to the device model
- * @rdev: RIO device
- *
- * Adds the RIO device to the global device list and adds the RIO
- * device to the RIO device list. Creates the generic sysfs nodes
- * for an RIO device.
- */
-static int rio_add_device(struct rio_dev *rdev)
-{
- int err;
-
- err = device_add(&rdev->dev);
- if (err)
- return err;
-
- spin_lock(&rio_global_list_lock);
- list_add_tail(&rdev->global_list, &rio_devices);
- spin_unlock(&rio_global_list_lock);
-
- rio_create_sysfs_dev_files(rdev);
-
- return 0;
-}
-
-/**
- * rio_enable_rx_tx_port - enable input receiver and output transmitter of
- * given port
- * @port: Master port associated with the RIO network
- * @local: local=1 select local port otherwise a far device is reached
- * @destid: Destination ID of the device to check host bit
- * @hopcount: Number of hops to reach the target
- * @port_num: Port (-number on switch) to enable on a far end device
- *
- * Returns 0 or 1 from on General Control Command and Status Register
- * (EXT_PTR+0x3C)
- */
-inline int rio_enable_rx_tx_port(struct rio_mport *port,
- int local, u16 destid,
- u8 hopcount, u8 port_num) {
-#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS
- u32 regval;
- u32 ext_ftr_ptr;
-
- /*
- * enable rx input tx output port
- */
- pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = "
- "%d, port_num = %d)\n", local, destid, hopcount, port_num);
-
- ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount);
-
- if (local) {
- rio_local_read_config_32(port, ext_ftr_ptr +
- RIO_PORT_N_CTL_CSR(0),
- &regval);
- } else {
- if (rio_mport_read_config_32(port, destid, hopcount,
- ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), &regval) < 0)
- return -EIO;
- }
-
- if (regval & RIO_PORT_N_CTL_P_TYP_SER) {
- /* serial */
- regval = regval | RIO_PORT_N_CTL_EN_RX_SER
- | RIO_PORT_N_CTL_EN_TX_SER;
- } else {
- /* parallel */
- regval = regval | RIO_PORT_N_CTL_EN_RX_PAR
- | RIO_PORT_N_CTL_EN_TX_PAR;
- }
-
- if (local) {
- rio_local_write_config_32(port, ext_ftr_ptr +
- RIO_PORT_N_CTL_CSR(0), regval);
- } else {
- if (rio_mport_write_config_32(port, destid, hopcount,
- ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0)
- return -EIO;
- }
-#endif
- return 0;
-}
-
-/**
* rio_setup_device- Allocates and sets up a RIO device
* @net: RIO network
* @port: Master port to send transactions
@@ -587,8 +462,7 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
rdev->destid);
}
- rdev->dev.bus = &rio_bus_type;
- rdev->dev.parent = &rio_bus;
+ rio_attach_device(rdev);
device_initialize(&rdev->dev);
rdev->dev.release = rio_release_dev;
@@ -1260,19 +1134,30 @@ static void rio_pw_enable(struct rio_mport *port, int enable)
/**
* rio_enum_mport- Start enumeration through a master port
* @mport: Master port to send transactions
+ * @flags: Enumeration control flags
*
* Starts the enumeration process. If somebody has enumerated our
* master port device, then give up. If not and we have an active
* link, then start recursive peer enumeration. Returns %0 if
* enumeration succeeds or %-EBUSY if enumeration fails.
*/
-int rio_enum_mport(struct rio_mport *mport)
+int rio_enum_mport(struct rio_mport *mport, u32 flags)
{
struct rio_net *net = NULL;
int rc = 0;
printk(KERN_INFO "RIO: enumerate master port %d, %s\n", mport->id,
mport->name);
+
+ /*
+ * To avoid multiple start requests (repeat enumeration is not supported
+ * by this method) check if enumeration/discovery was performed for this
+ * mport: if mport was added into the list of mports for a net exit
+ * with error.
+ */
+ if (mport->nnode.next || mport->nnode.prev)
+ return -EBUSY;
+
/* If somebody else enumerated our master port device, bail. */
if (rio_enum_host(mport) < 0) {
printk(KERN_INFO
@@ -1362,14 +1247,16 @@ static void rio_build_route_tables(struct rio_net *net)
/**
* rio_disc_mport- Start discovery through a master port
* @mport: Master port to send transactions
+ * @flags: discovery control flags
*
* Starts the discovery process. If we have an active link,
- * then wait for the signal that enumeration is complete.
+ * then wait for the signal that enumeration is complete (if wait
+ * is allowed).
* When enumeration completion is signaled, start recursive
* peer discovery. Returns %0 if discovery succeeds or %-EBUSY
* on failure.
*/
-int rio_disc_mport(struct rio_mport *mport)
+int rio_disc_mport(struct rio_mport *mport, u32 flags)
{
struct rio_net *net = NULL;
unsigned long to_end;
@@ -1379,6 +1266,11 @@ int rio_disc_mport(struct rio_mport *mport)
/* If master port has an active link, allocate net and discover peers */
if (rio_mport_is_active(mport)) {
+ if (rio_enum_complete(mport))
+ goto enum_done;
+ else if (flags & RIO_SCAN_ENUM_NO_WAIT)
+ return -EAGAIN;
+
pr_debug("RIO: wait for enumeration to complete...\n");
to_end = jiffies + CONFIG_RAPIDIO_DISC_TIMEOUT * HZ;
@@ -1421,3 +1313,41 @@ enum_done:
bail:
return -EBUSY;
}
+
+static struct rio_scan rio_scan_ops = {
+ .enumerate = rio_enum_mport,
+ .discover = rio_disc_mport,
+};
+
+static bool scan;
+module_param(scan, bool, 0);
+MODULE_PARM_DESC(scan, "Start RapidIO network enumeration/discovery "
+ "(default = 0)");
+
+/**
+ * rio_basic_attach:
+ *
+ * When this enumeration/discovery method is loaded as a module this function
+ * registers its specific enumeration and discover routines for all available
+ * RapidIO mport devices. The "scan" command line parameter controls ability of
+ * the module to start RapidIO enumeration/discovery automatically.
+ *
+ * Returns 0 for success or -EIO if unable to register itself.
+ *
+ * This enumeration/discovery method cannot be unloaded and therefore does not
+ * provide a matching cleanup_module routine.
+ */
+
+static int __init rio_basic_attach(void)
+{
+ if (rio_register_scan(RIO_MPORT_ANY, &rio_scan_ops))
+ return -EIO;
+ if (scan)
+ rio_init_mports();
+ return 0;
+}
+
+late_initcall(rio_basic_attach);
+
+MODULE_DESCRIPTION("Basic RapidIO enumeration/discovery");
+MODULE_LICENSE("GPL");