aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/pcmcia/qlogic_stub.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/pcmcia/qlogic_stub.c')
-rw-r--r--drivers/scsi/pcmcia/qlogic_stub.c425
1 files changed, 425 insertions, 0 deletions
diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c
new file mode 100644
index 00000000000..4766bcd6369
--- /dev/null
+++ b/drivers/scsi/pcmcia/qlogic_stub.c
@@ -0,0 +1,425 @@
+/*======================================================================
+
+ A driver for the Qlogic SCSI card
+
+ qlogic_cs.c 1.79 2000/06/12 21:27:26
+
+ The contents of this file are subject to the Mozilla Public
+ License Version 1.1 (the "License"); you may not use this file
+ except in compliance with the License. You may obtain a copy of
+ the License at http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS
+ IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ implied. See the License for the specific language governing
+ rights and limitations under the License.
+
+ The initial developer of the original code is David A. Hinds
+ <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
+ are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
+
+ Alternatively, the contents of this file may be used under the
+ terms of the GNU General Public License version 2 (the "GPL"), in which
+ case the provisions of the GPL are applicable instead of the
+ above. If you wish to allow the use of your version of this file
+ only under the terms of the GPL and not to allow others to use
+ your version of this file under the MPL, indicate your decision
+ by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL. If you do not delete
+ the provisions above, a recipient may use your version of this
+ file under either the MPL or the GPL.
+
+======================================================================*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <asm/io.h>
+#include <scsi/scsi.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <scsi/scsi_ioctl.h>
+#include <linux/interrupt.h>
+
+#include "scsi.h"
+#include <scsi/scsi_host.h>
+#include "../qlogicfas408.h"
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/ciscode.h>
+
+/* Set the following to 2 to use normal interrupt (active high/totempole-
+ * tristate), otherwise use 0 (REQUIRED FOR PCMCIA) for active low, open
+ * drain
+ */
+#define INT_TYPE 0
+
+static char qlogic_name[] = "qlogic_cs";
+
+#ifdef PCMCIA_DEBUG
+static int pc_debug = PCMCIA_DEBUG;
+module_param(pc_debug, int, 0644);
+#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
+static char *version = "qlogic_cs.c 1.79-ac 2002/10/26 (David Hinds)";
+#else
+#define DEBUG(n, args...)
+#endif
+
+static Scsi_Host_Template qlogicfas_driver_template = {
+ .module = THIS_MODULE,
+ .name = qlogic_name,
+ .proc_name = qlogic_name,
+ .info = qlogicfas408_info,
+ .queuecommand = qlogicfas408_queuecommand,
+ .eh_abort_handler = qlogicfas408_abort,
+ .eh_bus_reset_handler = qlogicfas408_bus_reset,
+ .eh_device_reset_handler= qlogicfas408_device_reset,
+ .eh_host_reset_handler = qlogicfas408_host_reset,
+ .bios_param = qlogicfas408_biosparam,
+ .can_queue = 1,
+ .this_id = -1,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = 1,
+ .use_clustering = DISABLE_CLUSTERING,
+};
+
+/*====================================================================*/
+
+typedef struct scsi_info_t {
+ dev_link_t link;
+ dev_node_t node;
+ struct Scsi_Host *host;
+ unsigned short manf_id;
+} scsi_info_t;
+
+static void qlogic_release(dev_link_t *link);
+static int qlogic_event(event_t event, int priority, event_callback_args_t * args);
+
+static dev_link_t *qlogic_attach(void);
+static void qlogic_detach(dev_link_t *);
+
+
+static dev_link_t *dev_list = NULL;
+
+static dev_info_t dev_info = "qlogic_cs";
+
+static struct Scsi_Host *qlogic_detect(Scsi_Host_Template *host,
+ dev_link_t *link, int qbase, int qlirq)
+{
+ int qltyp; /* type of chip */
+ int qinitid;
+ struct Scsi_Host *shost; /* registered host structure */
+ struct qlogicfas408_priv *priv;
+
+ qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE);
+ qinitid = host->this_id;
+ if (qinitid < 0)
+ qinitid = 7; /* if no ID, use 7 */
+
+ qlogicfas408_setup(qbase, qinitid, INT_TYPE);
+
+ host->name = qlogic_name;
+ shost = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv));
+ if (!shost)
+ goto err;
+ shost->io_port = qbase;
+ shost->n_io_port = 16;
+ shost->dma_channel = -1;
+ if (qlirq != -1)
+ shost->irq = qlirq;
+
+ priv = get_priv_by_host(shost);
+ priv->qlirq = qlirq;
+ priv->qbase = qbase;
+ priv->qinitid = qinitid;
+ priv->shost = shost;
+ priv->int_type = INT_TYPE;
+
+ if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogic_name, shost))
+ goto free_scsi_host;
+
+ sprintf(priv->qinfo,
+ "Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d",
+ qltyp, qbase, qlirq, QL_TURBO_PDMA);
+
+ if (scsi_add_host(shost, NULL))
+ goto free_interrupt;
+
+ scsi_scan_host(shost);
+
+ return shost;
+
+free_interrupt:
+ free_irq(qlirq, shost);
+
+free_scsi_host:
+ scsi_host_put(shost);
+
+err:
+ return NULL;
+}
+static dev_link_t *qlogic_attach(void)
+{
+ scsi_info_t *info;
+ client_reg_t client_reg;
+ dev_link_t *link;
+ int ret;
+
+ DEBUG(0, "qlogic_attach()\n");
+
+ /* Create new SCSI device */
+ info = kmalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return NULL;
+ memset(info, 0, sizeof(*info));
+ link = &info->link;
+ link->priv = info;
+ link->io.NumPorts1 = 16;
+ link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ link->io.IOAddrLines = 10;
+ link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+ link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ link->conf.Attributes = CONF_ENABLE_IRQ;
+ link->conf.Vcc = 50;
+ link->conf.IntType = INT_MEMORY_AND_IO;
+ link->conf.Present = PRESENT_OPTION;
+
+ /* Register with Card Services */
+ link->next = dev_list;
+ dev_list = link;
+ client_reg.dev_info = &dev_info;
+ client_reg.event_handler = &qlogic_event;
+ client_reg.EventMask = CS_EVENT_RESET_REQUEST | CS_EVENT_CARD_RESET | CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL | CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+ client_reg.Version = 0x0210;
+ client_reg.event_callback_args.client_data = link;
+ ret = pcmcia_register_client(&link->handle, &client_reg);
+ if (ret != 0) {
+ cs_error(link->handle, RegisterClient, ret);
+ qlogic_detach(link);
+ return NULL;
+ }
+
+ return link;
+} /* qlogic_attach */
+
+/*====================================================================*/
+
+static void qlogic_detach(dev_link_t * link)
+{
+ dev_link_t **linkp;
+
+ DEBUG(0, "qlogic_detach(0x%p)\n", link);
+
+ /* Locate device structure */
+ for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
+ if (*linkp == link)
+ break;
+ if (*linkp == NULL)
+ return;
+
+ if (link->state & DEV_CONFIG)
+ qlogic_release(link);
+
+ if (link->handle)
+ pcmcia_deregister_client(link->handle);
+
+ /* Unlink device structure, free bits */
+ *linkp = link->next;
+ kfree(link->priv);
+
+} /* qlogic_detach */
+
+/*====================================================================*/
+
+#define CS_CHECK(fn, ret) \
+do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+
+static void qlogic_config(dev_link_t * link)
+{
+ client_handle_t handle = link->handle;
+ scsi_info_t *info = link->priv;
+ tuple_t tuple;
+ cisparse_t parse;
+ int i, last_ret, last_fn;
+ unsigned short tuple_data[32];
+ struct Scsi_Host *host;
+
+ DEBUG(0, "qlogic_config(0x%p)\n", link);
+
+ tuple.TupleData = (cisdata_t *) tuple_data;
+ tuple.TupleDataMax = 64;
+ tuple.TupleOffset = 0;
+ tuple.DesiredTuple = CISTPL_CONFIG;
+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+ CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+ CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
+ link->conf.ConfigBase = parse.config.base;
+
+ tuple.DesiredTuple = CISTPL_MANFID;
+ if ((pcmcia_get_first_tuple(handle, &tuple) == CS_SUCCESS) && (pcmcia_get_tuple_data(handle, &tuple) == CS_SUCCESS))
+ info->manf_id = le16_to_cpu(tuple.TupleData[0]);
+
+ /* Configure card */
+ link->state |= DEV_CONFIG;
+
+ tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+ while (1) {
+ if (pcmcia_get_tuple_data(handle, &tuple) != 0 ||
+ pcmcia_parse_tuple(handle, &tuple, &parse) != 0)
+ goto next_entry;
+ link->conf.ConfigIndex = parse.cftable_entry.index;
+ link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
+ link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
+ if (link->io.BasePort1 != 0) {
+ i = pcmcia_request_io(handle, &link->io);
+ if (i == CS_SUCCESS)
+ break;
+ }
+ next_entry:
+ CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple));
+ }
+
+ CS_CHECK(RequestIRQ, pcmcia_request_irq(handle, &link->irq));
+ CS_CHECK(RequestConfiguration, pcmcia_request_configuration(handle, &link->conf));
+
+ if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) {
+ /* set ATAcmd */
+ outb(0xb4, link->io.BasePort1 + 0xd);
+ outb(0x24, link->io.BasePort1 + 0x9);
+ outb(0x04, link->io.BasePort1 + 0xd);
+ }
+
+ /* The KXL-810AN has a bigger IO port window */
+ if (link->io.NumPorts1 == 32)
+ host = qlogic_detect(&qlogicfas_driver_template, link,
+ link->io.BasePort1 + 16, link->irq.AssignedIRQ);
+ else
+ host = qlogic_detect(&qlogicfas_driver_template, link,
+ link->io.BasePort1, link->irq.AssignedIRQ);
+
+ if (!host) {
+ printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name);
+ goto out;
+ }
+
+ sprintf(info->node.dev_name, "scsi%d", host->host_no);
+ link->dev = &info->node;
+ info->host = host;
+
+out:
+ link->state &= ~DEV_CONFIG_PENDING;
+ return;
+
+cs_failed:
+ cs_error(link->handle, last_fn, last_ret);
+ link->dev = NULL;
+ pcmcia_release_configuration(link->handle);
+ pcmcia_release_io(link->handle, &link->io);
+ pcmcia_release_irq(link->handle, &link->irq);
+ link->state &= ~DEV_CONFIG;
+ return;
+
+} /* qlogic_config */
+
+/*====================================================================*/
+
+static void qlogic_release(dev_link_t *link)
+{
+ scsi_info_t *info = link->priv;
+
+ DEBUG(0, "qlogic_release(0x%p)\n", link);
+
+ scsi_remove_host(info->host);
+ link->dev = NULL;
+
+ free_irq(link->irq.AssignedIRQ, info->host);
+
+ pcmcia_release_configuration(link->handle);
+ pcmcia_release_io(link->handle, &link->io);
+ pcmcia_release_irq(link->handle, &link->irq);
+
+ scsi_host_put(info->host);
+
+ link->state &= ~DEV_CONFIG;
+}
+
+/*====================================================================*/
+
+static int qlogic_event(event_t event, int priority, event_callback_args_t * args)
+{
+ dev_link_t *link = args->client_data;
+
+ DEBUG(1, "qlogic_event(0x%06x)\n", event);
+
+ switch (event) {
+ case CS_EVENT_CARD_REMOVAL:
+ link->state &= ~DEV_PRESENT;
+ if (link->state & DEV_CONFIG)
+ qlogic_release(link);
+ break;
+ case CS_EVENT_CARD_INSERTION:
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ qlogic_config(link);
+ break;
+ case CS_EVENT_PM_SUSPEND:
+ link->state |= DEV_SUSPEND;
+ /* Fall through... */
+ case CS_EVENT_RESET_PHYSICAL:
+ if (link->state & DEV_CONFIG)
+ pcmcia_release_configuration(link->handle);
+ break;
+ case CS_EVENT_PM_RESUME:
+ link->state &= ~DEV_SUSPEND;
+ /* Fall through... */
+ case CS_EVENT_CARD_RESET:
+ if (link->state & DEV_CONFIG) {
+ scsi_info_t *info = link->priv;
+ pcmcia_request_configuration(link->handle, &link->conf);
+ if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) {
+ outb(0x80, link->io.BasePort1 + 0xd);
+ outb(0x24, link->io.BasePort1 + 0x9);
+ outb(0x04, link->io.BasePort1 + 0xd);
+ }
+ /* Ugggglllyyyy!!! */
+ qlogicfas408_bus_reset(NULL);
+ }
+ break;
+ }
+ return 0;
+} /* qlogic_event */
+
+
+static struct pcmcia_driver qlogic_cs_driver = {
+ .owner = THIS_MODULE,
+ .drv = {
+ .name = "qlogic_cs",
+ },
+ .attach = qlogic_attach,
+ .detach = qlogic_detach,
+};
+
+static int __init init_qlogic_cs(void)
+{
+ return pcmcia_register_driver(&qlogic_cs_driver);
+}
+
+static void __exit exit_qlogic_cs(void)
+{
+ pcmcia_unregister_driver(&qlogic_cs_driver);
+ BUG_ON(dev_list != NULL);
+}
+
+MODULE_AUTHOR("Tom Zerucha, Michael Griffith");
+MODULE_DESCRIPTION("Driver for the PCMCIA Qlogic FAS SCSI controllers");
+MODULE_LICENSE("GPL");
+module_init(init_qlogic_cs);
+module_exit(exit_qlogic_cs);