aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/pm8001/pm80xx_hwi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/pm8001/pm80xx_hwi.c')
-rw-r--r--drivers/scsi/pm8001/pm80xx_hwi.c4130
1 files changed, 4130 insertions, 0 deletions
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
new file mode 100644
index 00000000000..302514d8157
--- /dev/null
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -0,0 +1,4130 @@
+/*
+ * PMC-Sierra SPCv/ve 8088/8089 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 PMC-Sierra, Inc.,
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+ #include <linux/slab.h>
+ #include "pm8001_sas.h"
+ #include "pm80xx_hwi.h"
+ #include "pm8001_chips.h"
+ #include "pm8001_ctl.h"
+
+#define SMP_DIRECT 1
+#define SMP_INDIRECT 2
+/**
+ * read_main_config_table - read the configure table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_main_config_table(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
+
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.signature =
+ pm8001_mr32(address, MAIN_SIGNATURE_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.interface_rev =
+ pm8001_mr32(address, MAIN_INTERFACE_REVISION);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev =
+ pm8001_mr32(address, MAIN_FW_REVISION);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_out_io =
+ pm8001_mr32(address, MAIN_MAX_OUTSTANDING_IO_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_sgl =
+ pm8001_mr32(address, MAIN_MAX_SGL_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.ctrl_cap_flag =
+ pm8001_mr32(address, MAIN_CNTRL_CAP_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.gst_offset =
+ pm8001_mr32(address, MAIN_GST_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.inbound_queue_offset =
+ pm8001_mr32(address, MAIN_IBQ_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.outbound_queue_offset =
+ pm8001_mr32(address, MAIN_OBQ_OFFSET);
+
+ /* read Error Dump Offset and Length */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_offset0 =
+ pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_length0 =
+ pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_LENGTH);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_offset1 =
+ pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_length1 =
+ pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_LENGTH);
+
+ /* read GPIO LED settings from the configuration table */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping =
+ pm8001_mr32(address, MAIN_GPIO_LED_FLAGS_OFFSET);
+
+ /* read analog Setting offset from the configuration table */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.analog_setup_table_offset =
+ pm8001_mr32(address, MAIN_ANALOG_SETUP_OFFSET);
+
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.int_vec_table_offset =
+ pm8001_mr32(address, MAIN_INT_VECTOR_TABLE_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.phy_attr_table_offset =
+ pm8001_mr32(address, MAIN_SAS_PHY_ATTR_TABLE_OFFSET);
+}
+
+/**
+ * read_general_status_table - read the general status table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_general_status_table(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *address = pm8001_ha->general_stat_tbl_addr;
+ pm8001_ha->gs_tbl.pm80xx_tbl.gst_len_mpistate =
+ pm8001_mr32(address, GST_GSTLEN_MPIS_OFFSET);
+ pm8001_ha->gs_tbl.pm80xx_tbl.iq_freeze_state0 =
+ pm8001_mr32(address, GST_IQ_FREEZE_STATE0_OFFSET);
+ pm8001_ha->gs_tbl.pm80xx_tbl.iq_freeze_state1 =
+ pm8001_mr32(address, GST_IQ_FREEZE_STATE1_OFFSET);
+ pm8001_ha->gs_tbl.pm80xx_tbl.msgu_tcnt =
+ pm8001_mr32(address, GST_MSGUTCNT_OFFSET);
+ pm8001_ha->gs_tbl.pm80xx_tbl.iop_tcnt =
+ pm8001_mr32(address, GST_IOPTCNT_OFFSET);
+ pm8001_ha->gs_tbl.pm80xx_tbl.gpio_input_val =
+ pm8001_mr32(address, GST_GPIO_INPUT_VAL);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[0] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET0);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[1] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET1);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[2] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET2);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[3] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET3);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[4] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET4);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[5] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET5);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[6] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET6);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[7] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET7);
+}
+/**
+ * read_phy_attr_table - read the phy attribute table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_phy_attr_table(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *address = pm8001_ha->pspa_q_tbl_addr;
+ pm8001_ha->phy_attr_table.phystart1_16[0] =
+ pm8001_mr32(address, PSPA_PHYSTATE0_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[1] =
+ pm8001_mr32(address, PSPA_PHYSTATE1_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[2] =
+ pm8001_mr32(address, PSPA_PHYSTATE2_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[3] =
+ pm8001_mr32(address, PSPA_PHYSTATE3_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[4] =
+ pm8001_mr32(address, PSPA_PHYSTATE4_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[5] =
+ pm8001_mr32(address, PSPA_PHYSTATE5_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[6] =
+ pm8001_mr32(address, PSPA_PHYSTATE6_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[7] =
+ pm8001_mr32(address, PSPA_PHYSTATE7_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[8] =
+ pm8001_mr32(address, PSPA_PHYSTATE8_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[9] =
+ pm8001_mr32(address, PSPA_PHYSTATE9_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[10] =
+ pm8001_mr32(address, PSPA_PHYSTATE10_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[11] =
+ pm8001_mr32(address, PSPA_PHYSTATE11_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[12] =
+ pm8001_mr32(address, PSPA_PHYSTATE12_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[13] =
+ pm8001_mr32(address, PSPA_PHYSTATE13_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[14] =
+ pm8001_mr32(address, PSPA_PHYSTATE14_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[15] =
+ pm8001_mr32(address, PSPA_PHYSTATE15_OFFSET);
+
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[0] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID0_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[1] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID1_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[2] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID2_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[3] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID3_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[4] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID4_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[5] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID5_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[6] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID6_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[7] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID7_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[8] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID8_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[9] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID9_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[10] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID10_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[11] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID11_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[12] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID12_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[13] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID13_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[14] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID14_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[15] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID15_OFFSET);
+
+}
+
+/**
+ * read_inbnd_queue_table - read the inbound queue table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+{
+ int i;
+ void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
+ for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) {
+ u32 offset = i * 0x20;
+ pm8001_ha->inbnd_q_tbl[i].pi_pci_bar =
+ get_pci_bar_index(pm8001_mr32(address,
+ (offset + IB_PIPCI_BAR)));
+ pm8001_ha->inbnd_q_tbl[i].pi_offset =
+ pm8001_mr32(address, (offset + IB_PIPCI_BAR_OFFSET));
+ }
+}
+
+/**
+ * read_outbnd_queue_table - read the outbound queue table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+{
+ int i;
+ void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
+ for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) {
+ u32 offset = i * 0x24;
+ pm8001_ha->outbnd_q_tbl[i].ci_pci_bar =
+ get_pci_bar_index(pm8001_mr32(address,
+ (offset + OB_CIPCI_BAR)));
+ pm8001_ha->outbnd_q_tbl[i].ci_offset =
+ pm8001_mr32(address, (offset + OB_CIPCI_BAR_OFFSET));
+ }
+}
+
+/**
+ * init_default_table_values - init the default table.
+ * @pm8001_ha: our hba card information
+ */
+static void init_default_table_values(struct pm8001_hba_info *pm8001_ha)
+{
+ int i;
+ u32 offsetib, offsetob;
+ void __iomem *addressib = pm8001_ha->inbnd_q_tbl_addr;
+ void __iomem *addressob = pm8001_ha->outbnd_q_tbl_addr;
+
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_event_log_addr =
+ pm8001_ha->memoryMap.region[AAP1].phys_addr_hi;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_event_log_addr =
+ pm8001_ha->memoryMap.region[AAP1].phys_addr_lo;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_size =
+ PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_severity = 0x01;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_pcs_event_log_addr =
+ pm8001_ha->memoryMap.region[IOP].phys_addr_hi;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_pcs_event_log_addr =
+ pm8001_ha->memoryMap.region[IOP].phys_addr_lo;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_size =
+ PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_severity = 0x01;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt = 0x01;
+
+ /* Disable end to end CRC checking */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.crc_core_dump = (0x1 << 16);
+
+ for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) {
+ pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt =
+ PM8001_MPI_QUEUE | (64 << 16) | (0x00<<30);
+ pm8001_ha->inbnd_q_tbl[i].upper_base_addr =
+ pm8001_ha->memoryMap.region[IB + i].phys_addr_hi;
+ pm8001_ha->inbnd_q_tbl[i].lower_base_addr =
+ pm8001_ha->memoryMap.region[IB + i].phys_addr_lo;
+ pm8001_ha->inbnd_q_tbl[i].base_virt =
+ (u8 *)pm8001_ha->memoryMap.region[IB + i].virt_ptr;
+ pm8001_ha->inbnd_q_tbl[i].total_length =
+ pm8001_ha->memoryMap.region[IB + i].total_len;
+ pm8001_ha->inbnd_q_tbl[i].ci_upper_base_addr =
+ pm8001_ha->memoryMap.region[CI + i].phys_addr_hi;
+ pm8001_ha->inbnd_q_tbl[i].ci_lower_base_addr =
+ pm8001_ha->memoryMap.region[CI + i].phys_addr_lo;
+ pm8001_ha->inbnd_q_tbl[i].ci_virt =
+ pm8001_ha->memoryMap.region[CI + i].virt_ptr;
+ offsetib = i * 0x20;
+ pm8001_ha->inbnd_q_tbl[i].pi_pci_bar =
+ get_pci_bar_index(pm8001_mr32(addressib,
+ (offsetib + 0x14)));
+ pm8001_ha->inbnd_q_tbl[i].pi_offset =
+ pm8001_mr32(addressib, (offsetib + 0x18));
+ pm8001_ha->inbnd_q_tbl[i].producer_idx = 0;
+ pm8001_ha->inbnd_q_tbl[i].consumer_index = 0;
+ }
+ for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) {
+ pm8001_ha->outbnd_q_tbl[i].element_size_cnt =
+ PM8001_MPI_QUEUE | (64 << 16) | (0x01<<30);
+ pm8001_ha->outbnd_q_tbl[i].upper_base_addr =
+ pm8001_ha->memoryMap.region[OB + i].phys_addr_hi;
+ pm8001_ha->outbnd_q_tbl[i].lower_base_addr =
+ pm8001_ha->memoryMap.region[OB + i].phys_addr_lo;
+ pm8001_ha->outbnd_q_tbl[i].base_virt =
+ (u8 *)pm8001_ha->memoryMap.region[OB + i].virt_ptr;
+ pm8001_ha->outbnd_q_tbl[i].total_length =
+ pm8001_ha->memoryMap.region[OB + i].total_len;
+ pm8001_ha->outbnd_q_tbl[i].pi_upper_base_addr =
+ pm8001_ha->memoryMap.region[PI + i].phys_addr_hi;
+ pm8001_ha->outbnd_q_tbl[i].pi_lower_base_addr =
+ pm8001_ha->memoryMap.region[PI + i].phys_addr_lo;
+ /* interrupt vector based on oq */
+ pm8001_ha->outbnd_q_tbl[i].interrup_vec_cnt_delay = (i << 24);
+ pm8001_ha->outbnd_q_tbl[i].pi_virt =
+ pm8001_ha->memoryMap.region[PI + i].virt_ptr;
+ offsetob = i * 0x24;
+ pm8001_ha->outbnd_q_tbl[i].ci_pci_bar =
+ get_pci_bar_index(pm8001_mr32(addressob,
+ offsetob + 0x14));
+ pm8001_ha->outbnd_q_tbl[i].ci_offset =
+ pm8001_mr32(addressob, (offsetob + 0x18));
+ pm8001_ha->outbnd_q_tbl[i].consumer_idx = 0;
+ pm8001_ha->outbnd_q_tbl[i].producer_index = 0;
+ }
+}
+
+/**
+ * update_main_config_table - update the main default table to the HBA.
+ * @pm8001_ha: our hba card information
+ */
+static void update_main_config_table(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
+ pm8001_mw32(address, MAIN_IQNPPD_HPPD_OFFSET,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.inbound_q_nppd_hppd);
+ pm8001_mw32(address, MAIN_EVENT_LOG_ADDR_HI,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_event_log_addr);
+ pm8001_mw32(address, MAIN_EVENT_LOG_ADDR_LO,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_event_log_addr);
+ pm8001_mw32(address, MAIN_EVENT_LOG_BUFF_SIZE,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_size);
+ pm8001_mw32(address, MAIN_EVENT_LOG_OPTION,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_severity);
+ pm8001_mw32(address, MAIN_PCS_EVENT_LOG_ADDR_HI,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_pcs_event_log_addr);
+ pm8001_mw32(address, MAIN_PCS_EVENT_LOG_ADDR_LO,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_pcs_event_log_addr);
+ pm8001_mw32(address, MAIN_PCS_EVENT_LOG_BUFF_SIZE,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_size);
+ pm8001_mw32(address, MAIN_PCS_EVENT_LOG_OPTION,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_severity);
+ pm8001_mw32(address, MAIN_FATAL_ERROR_INTERRUPT,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt);
+ pm8001_mw32(address, MAIN_EVENT_CRC_CHECK,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.crc_core_dump);
+
+ /* SPCv specific */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping &= 0xCFFFFFFF;
+ /* Set GPIOLED to 0x2 for LED indicator */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping |= 0x20000000;
+ pm8001_mw32(address, MAIN_GPIO_LED_FLAGS_OFFSET,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping);
+
+ pm8001_mw32(address, MAIN_PORT_RECOVERY_TIMER,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer);
+ pm8001_mw32(address, MAIN_INT_REASSERTION_DELAY,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.interrupt_reassertion_delay);
+}
+
+/**
+ * update_inbnd_queue_table - update the inbound queue table to the HBA.
+ * @pm8001_ha: our hba card information
+ */
+static void update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
+ int number)
+{
+ void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
+ u16 offset = number * 0x20;
+ pm8001_mw32(address, offset + IB_PROPERITY_OFFSET,
+ pm8001_ha->inbnd_q_tbl[number].element_pri_size_cnt);
+ pm8001_mw32(address, offset + IB_BASE_ADDR_HI_OFFSET,
+ pm8001_ha->inbnd_q_tbl[number].upper_base_addr);
+ pm8001_mw32(address, offset + IB_BASE_ADDR_LO_OFFSET,
+ pm8001_ha->inbnd_q_tbl[number].lower_base_addr);
+ pm8001_mw32(address, offset + IB_CI_BASE_ADDR_HI_OFFSET,
+ pm8001_ha->inbnd_q_tbl[number].ci_upper_base_addr);
+ pm8001_mw32(address, offset + IB_CI_BASE_ADDR_LO_OFFSET,
+ pm8001_ha->inbnd_q_tbl[number].ci_lower_base_addr);
+}
+
+/**
+ * update_outbnd_queue_table - update the outbound queue table to the HBA.
+ * @pm8001_ha: our hba card information
+ */
+static void update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
+ int number)
+{
+ void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
+ u16 offset = number * 0x24;
+ pm8001_mw32(address, offset + OB_PROPERITY_OFFSET,
+ pm8001_ha->outbnd_q_tbl[number].element_size_cnt);
+ pm8001_mw32(address, offset + OB_BASE_ADDR_HI_OFFSET,
+ pm8001_ha->outbnd_q_tbl[number].upper_base_addr);
+ pm8001_mw32(address, offset + OB_BASE_ADDR_LO_OFFSET,
+ pm8001_ha->outbnd_q_tbl[number].lower_base_addr);
+ pm8001_mw32(address, offset + OB_PI_BASE_ADDR_HI_OFFSET,
+ pm8001_ha->outbnd_q_tbl[number].pi_upper_base_addr);
+ pm8001_mw32(address, offset + OB_PI_BASE_ADDR_LO_OFFSET,
+ pm8001_ha->outbnd_q_tbl[number].pi_lower_base_addr);
+ pm8001_mw32(address, offset + OB_INTERRUPT_COALES_OFFSET,
+ pm8001_ha->outbnd_q_tbl[number].interrup_vec_cnt_delay);
+}
+
+/**
+ * mpi_init_check - check firmware initialization status.
+ * @pm8001_ha: our hba card information
+ */
+static int mpi_init_check(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 max_wait_count;
+ u32 value;
+ u32 gst_len_mpistate;
+
+ /* Write bit0=1 to Inbound DoorBell Register to tell the SPC FW the
+ table is updated */
+ pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPCv_MSGU_CFG_TABLE_UPDATE);
+ /* wait until Inbound DoorBell Clear Register toggled */
+ max_wait_count = 2 * 1000 * 1000;/* 2 sec for spcv/ve */
+ do {
+ udelay(1);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET);
+ value &= SPCv_MSGU_CFG_TABLE_UPDATE;
+ } while ((value != 0) && (--max_wait_count));
+
+ if (!max_wait_count)
+ return -1;
+ /* check the MPI-State for initialization upto 100ms*/
+ max_wait_count = 100 * 1000;/* 100 msec */
+ do {
+ udelay(1);
+ gst_len_mpistate =
+ pm8001_mr32(pm8001_ha->general_stat_tbl_addr,
+ GST_GSTLEN_MPIS_OFFSET);
+ } while ((GST_MPI_STATE_INIT !=
+ (gst_len_mpistate & GST_MPI_STATE_MASK)) && (--max_wait_count));
+ if (!max_wait_count)
+ return -1;
+
+ /* check MPI Initialization error */
+ gst_len_mpistate = gst_len_mpistate >> 16;
+ if (0x0000 != gst_len_mpistate)
+ return -1;
+
+ return 0;
+}
+
+/**
+ * check_fw_ready - The LLDD check if the FW is ready, if not, return error.
+ * @pm8001_ha: our hba card information
+ */
+static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 value;
+ u32 max_wait_count;
+ u32 max_wait_time;
+ int ret = 0;
+
+ /* reset / PCIe ready */
+ max_wait_time = max_wait_count = 100 * 1000; /* 100 milli sec */
+ do {
+ udelay(1);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ } while ((value == 0xFFFFFFFF) && (--max_wait_count));
+
+ /* check ila status */
+ max_wait_time = max_wait_count = 1000 * 1000; /* 1000 milli sec */
+ do {
+ udelay(1);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ } while (((value & SCRATCH_PAD_ILA_READY) !=
+ SCRATCH_PAD_ILA_READY) && (--max_wait_count));
+ if (!max_wait_count)
+ ret = -1;
+ else {
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" ila ready status in %d millisec\n",
+ (max_wait_time - max_wait_count)));
+ }
+
+ /* check RAAE status */
+ max_wait_time = max_wait_count = 1800 * 1000; /* 1800 milli sec */
+ do {
+ udelay(1);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ } while (((value & SCRATCH_PAD_RAAE_READY) !=
+ SCRATCH_PAD_RAAE_READY) && (--max_wait_count));
+ if (!max_wait_count)
+ ret = -1;
+ else {
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" raae ready status in %d millisec\n",
+ (max_wait_time - max_wait_count)));
+ }
+
+ /* check iop0 status */
+ max_wait_time = max_wait_count = 600 * 1000; /* 600 milli sec */
+ do {
+ udelay(1);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ } while (((value & SCRATCH_PAD_IOP0_READY) != SCRATCH_PAD_IOP0_READY) &&
+ (--max_wait_count));
+ if (!max_wait_count)
+ ret = -1;
+ else {
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" iop0 ready status in %d millisec\n",
+ (max_wait_time - max_wait_count)));
+ }
+
+ /* check iop1 status only for 16 port controllers */
+ if ((pm8001_ha->chip_id != chip_8008) &&
+ (pm8001_ha->chip_id != chip_8009)) {
+ /* 200 milli sec */
+ max_wait_time = max_wait_count = 200 * 1000;
+ do {
+ udelay(1);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ } while (((value & SCRATCH_PAD_IOP1_READY) !=
+ SCRATCH_PAD_IOP1_READY) && (--max_wait_count));
+ if (!max_wait_count)
+ ret = -1;
+ else {
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "iop1 ready status in %d millisec\n",
+ (max_wait_time - max_wait_count)));
+ }
+ }
+
+ return ret;
+}
+
+static void init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *base_addr;
+ u32 value;
+ u32 offset;
+ u32 pcibar;
+ u32 pcilogic;
+
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0);
+ offset = value & 0x03FFFFFF; /* scratch pad 0 TBL address */
+
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("Scratchpad 0 Offset: 0x%x value 0x%x\n",
+ offset, value));
+ pcilogic = (value & 0xFC000000) >> 26;
+ pcibar = get_pci_bar_index(pcilogic);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("Scratchpad 0 PCI BAR: %d\n", pcibar));
+ pm8001_ha->main_cfg_tbl_addr = base_addr =
+ pm8001_ha->io_mem[pcibar].memvirtaddr + offset;
+ pm8001_ha->general_stat_tbl_addr =
+ base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x18) &
+ 0xFFFFFF);
+ pm8001_ha->inbnd_q_tbl_addr =
+ base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x1C) &
+ 0xFFFFFF);
+ pm8001_ha->outbnd_q_tbl_addr =
+ base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x20) &
+ 0xFFFFFF);
+ pm8001_ha->ivt_tbl_addr =
+ base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x8C) &
+ 0xFFFFFF);
+ pm8001_ha->pspa_q_tbl_addr =
+ base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x90) &
+ 0xFFFFFF);
+
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("GST OFFSET 0x%x\n",
+ pm8001_cr32(pm8001_ha, pcibar, offset + 0x18)));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("INBND OFFSET 0x%x\n",
+ pm8001_cr32(pm8001_ha, pcibar, offset + 0x1C)));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("OBND OFFSET 0x%x\n",
+ pm8001_cr32(pm8001_ha, pcibar, offset + 0x20)));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("IVT OFFSET 0x%x\n",
+ pm8001_cr32(pm8001_ha, pcibar, offset + 0x8C)));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("PSPA OFFSET 0x%x\n",
+ pm8001_cr32(pm8001_ha, pcibar, offset + 0x90)));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("addr - main cfg %p general status %p\n",
+ pm8001_ha->main_cfg_tbl_addr,
+ pm8001_ha->general_stat_tbl_addr));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("addr - inbnd %p obnd %p\n",
+ pm8001_ha->inbnd_q_tbl_addr,
+ pm8001_ha->outbnd_q_tbl_addr));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("addr - pspa %p ivt %p\n",
+ pm8001_ha->pspa_q_tbl_addr,
+ pm8001_ha->ivt_tbl_addr));
+}
+
+/**
+ * pm80xx_set_thermal_config - support the thermal configuration
+ * @pm8001_ha: our hba card information.
+ */
+int
+pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha)
+{
+ struct set_ctrl_cfg_req payload;
+ struct inbound_queue_table *circularQ;
+ int rc;
+ u32 tag;
+ u32 opc = OPC_INB_SET_CONTROLLER_CONFIG;
+
+ memset(&payload, 0, sizeof(struct set_ctrl_cfg_req));
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc)
+ return -1;
+
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ payload.tag = cpu_to_le32(tag);
+ payload.cfg_pg[0] = (THERMAL_LOG_ENABLE << 9) |
+ (THERMAL_ENABLE << 8) | THERMAL_OP_CODE;
+ payload.cfg_pg[1] = (LTEMPHIL << 24) | (RTEMPHIL << 8);
+
+ rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+ return rc;
+
+}
+
+/**
+* pm80xx_set_sas_protocol_timer_config - support the SAS Protocol
+* Timer configuration page
+* @pm8001_ha: our hba card information.
+*/
+static int
+pm80xx_set_sas_protocol_timer_config(struct pm8001_hba_info *pm8001_ha)
+{
+ struct set_ctrl_cfg_req payload;
+ struct inbound_queue_table *circularQ;
+ SASProtocolTimerConfig_t SASConfigPage;
+ int rc;
+ u32 tag;
+ u32 opc = OPC_INB_SET_CONTROLLER_CONFIG;
+
+ memset(&payload, 0, sizeof(struct set_ctrl_cfg_req));
+ memset(&SASConfigPage, 0, sizeof(SASProtocolTimerConfig_t));
+
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+
+ if (rc)
+ return -1;
+
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ payload.tag = cpu_to_le32(tag);
+
+ SASConfigPage.pageCode = SAS_PROTOCOL_TIMER_CONFIG_PAGE;
+ SASConfigPage.MST_MSI = 3 << 15;
+ SASConfigPage.STP_SSP_MCT_TMO = (STP_MCT_TMO << 16) | SSP_MCT_TMO;
+ SASConfigPage.STP_FRM_TMO = (SAS_MAX_OPEN_TIME << 24) |
+ (SMP_MAX_CONN_TIMER << 16) | STP_FRM_TIMER;
+ SASConfigPage.STP_IDLE_TMO = STP_IDLE_TIME;
+
+ if (SASConfigPage.STP_IDLE_TMO > 0x3FFFFFF)
+ SASConfigPage.STP_IDLE_TMO = 0x3FFFFFF;
+
+
+ SASConfigPage.OPNRJT_RTRY_INTVL = (SAS_MFD << 16) |
+ SAS_OPNRJT_RTRY_INTVL;
+ SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO = (SAS_DOPNRJT_RTRY_TMO << 16)
+ | SAS_COPNRJT_RTRY_TMO;
+ SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR = (SAS_DOPNRJT_RTRY_THR << 16)
+ | SAS_COPNRJT_RTRY_THR;
+ SASConfigPage.MAX_AIP = SAS_MAX_AIP;
+
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.pageCode "
+ "0x%08x\n", SASConfigPage.pageCode));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.MST_MSI "
+ " 0x%08x\n", SASConfigPage.MST_MSI));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.STP_SSP_MCT_TMO "
+ " 0x%08x\n", SASConfigPage.STP_SSP_MCT_TMO));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.STP_FRM_TMO "
+ " 0x%08x\n", SASConfigPage.STP_FRM_TMO));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.STP_IDLE_TMO "
+ " 0x%08x\n", SASConfigPage.STP_IDLE_TMO));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.OPNRJT_RTRY_INTVL "
+ " 0x%08x\n", SASConfigPage.OPNRJT_RTRY_INTVL));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO "
+ " 0x%08x\n", SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR "
+ " 0x%08x\n", SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR));
+ PM8001_INIT_DBG(pm8001_ha, pm8001_printk("SASConfigPage.MAX_AIP "
+ " 0x%08x\n", SASConfigPage.MAX_AIP));
+
+ memcpy(&payload.cfg_pg, &SASConfigPage,
+ sizeof(SASProtocolTimerConfig_t));
+
+ rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+
+ return rc;
+}
+
+/**
+ * pm80xx_get_encrypt_info - Check for encryption
+ * @pm8001_ha: our hba card information.
+ */
+static int
+pm80xx_get_encrypt_info(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 scratch3_value;
+ int ret;
+
+ /* Read encryption status from SCRATCH PAD 3 */
+ scratch3_value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3);
+
+ if ((scratch3_value & SCRATCH_PAD3_ENC_MASK) ==
+ SCRATCH_PAD3_ENC_READY) {
+ if (scratch3_value & SCRATCH_PAD3_XTS_ENABLED)
+ pm8001_ha->encrypt_info.cipher_mode = CIPHER_MODE_XTS;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMF_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMF;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMA_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMA;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMB_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB;
+ pm8001_ha->encrypt_info.status = 0;
+ PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
+ "Encryption: SCRATCH_PAD3_ENC_READY 0x%08X."
+ "Cipher mode 0x%x Sec mode 0x%x status 0x%x\n",
+ scratch3_value, pm8001_ha->encrypt_info.cipher_mode,
+ pm8001_ha->encrypt_info.sec_mode,
+ pm8001_ha->encrypt_info.status));
+ ret = 0;
+ } else if ((scratch3_value & SCRATCH_PAD3_ENC_READY) ==
+ SCRATCH_PAD3_ENC_DISABLED) {
+ PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
+ "Encryption: SCRATCH_PAD3_ENC_DISABLED 0x%08X\n",
+ scratch3_value));
+ pm8001_ha->encrypt_info.status = 0xFFFFFFFF;
+ pm8001_ha->encrypt_info.cipher_mode = 0;
+ pm8001_ha->encrypt_info.sec_mode = 0;
+ return 0;
+ } else if ((scratch3_value & SCRATCH_PAD3_ENC_MASK) ==
+ SCRATCH_PAD3_ENC_DIS_ERR) {
+ pm8001_ha->encrypt_info.status =
+ (scratch3_value & SCRATCH_PAD3_ERR_CODE) >> 16;
+ if (scratch3_value & SCRATCH_PAD3_XTS_ENABLED)
+ pm8001_ha->encrypt_info.cipher_mode = CIPHER_MODE_XTS;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMF_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMF;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMA_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMA;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMB_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB;
+ PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
+ "Encryption: SCRATCH_PAD3_DIS_ERR 0x%08X."
+ "Cipher mode 0x%x sec mode 0x%x status 0x%x\n",
+ scratch3_value, pm8001_ha->encrypt_info.cipher_mode,
+ pm8001_ha->encrypt_info.sec_mode,
+ pm8001_ha->encrypt_info.status));
+ ret = -1;
+ } else if ((scratch3_value & SCRATCH_PAD3_ENC_MASK) ==
+ SCRATCH_PAD3_ENC_ENA_ERR) {
+
+ pm8001_ha->encrypt_info.status =
+ (scratch3_value & SCRATCH_PAD3_ERR_CODE) >> 16;
+ if (scratch3_value & SCRATCH_PAD3_XTS_ENABLED)
+ pm8001_ha->encrypt_info.cipher_mode = CIPHER_MODE_XTS;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMF_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMF;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMA_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMA;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMB_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB;
+
+ PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
+ "Encryption: SCRATCH_PAD3_ENA_ERR 0x%08X."
+ "Cipher mode 0x%x sec mode 0x%x status 0x%x\n",
+ scratch3_value, pm8001_ha->encrypt_info.cipher_mode,
+ pm8001_ha->encrypt_info.sec_mode,
+ pm8001_ha->encrypt_info.status));
+ ret = -1;
+ }
+ return ret;
+}
+
+/**
+ * pm80xx_encrypt_update - update flash with encryption informtion
+ * @pm8001_ha: our hba card information.
+ */
+static int pm80xx_encrypt_update(struct pm8001_hba_info *pm8001_ha)
+{
+ struct kek_mgmt_req payload;
+ struct inbound_queue_table *circularQ;
+ int rc;
+ u32 tag;
+ u32 opc = OPC_INB_KEK_MANAGEMENT;
+
+ memset(&payload, 0, sizeof(struct kek_mgmt_req));
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc)
+ return -1;
+
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ payload.tag = cpu_to_le32(tag);
+ /* Currently only one key is used. New KEK index is 1.
+ * Current KEK index is 1. Store KEK to NVRAM is 1.
+ */
+ payload.new_curidx_ksop = ((1 << 24) | (1 << 16) | (1 << 8) |
+ KEK_MGMT_SUBOP_KEYCARDUPDATE);
+
+ rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+
+ return rc;
+}
+
+/**
+ * pm8001_chip_init - the main init function that initialize whole PM8001 chip.
+ * @pm8001_ha: our hba card information
+ */
+static int pm80xx_chip_init(struct pm8001_hba_info *pm8001_ha)
+{
+ int ret;
+ u8 i = 0;
+
+ /* check the firmware status */
+ if (-1 == check_fw_ready(pm8001_ha)) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Firmware is not ready!\n"));
+ return -EBUSY;
+ }
+
+ /* Initialize pci space address eg: mpi offset */
+ init_pci_device_addresses(pm8001_ha);
+ init_default_table_values(pm8001_ha);
+ read_main_config_table(pm8001_ha);
+ read_general_status_table(pm8001_ha);
+ read_inbnd_queue_table(pm8001_ha);
+ read_outbnd_queue_table(pm8001_ha);
+ read_phy_attr_table(pm8001_ha);
+
+ /* update main config table ,inbound table and outbound table */
+ update_main_config_table(pm8001_ha);
+ for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++)
+ update_inbnd_queue_table(pm8001_ha, i);
+ for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++)
+ update_outbnd_queue_table(pm8001_ha, i);
+
+ /* notify firmware update finished and check initialization status */
+ if (0 == mpi_init_check(pm8001_ha)) {
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("MPI initialize successful!\n"));
+ } else
+ return -EBUSY;
+
+ /* send SAS protocol timer configuration page to FW */
+ ret = pm80xx_set_sas_protocol_timer_config(pm8001_ha);
+
+ /* Check for encryption */
+ if (pm8001_ha->chip->encrypt) {
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("Checking for encryption\n"));
+ ret = pm80xx_get_encrypt_info(pm8001_ha);
+ if (ret == -1) {
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("Encryption error !!\n"));
+ if (pm8001_ha->encrypt_info.status == 0x81) {
+ PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
+ "Encryption enabled with error."
+ "Saving encryption key to flash\n"));
+ pm80xx_encrypt_update(pm8001_ha);
+ }
+ }
+ }
+ return 0;
+}
+
+static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 max_wait_count;
+ u32 value;
+ u32 gst_len_mpistate;
+ init_pci_device_addresses(pm8001_ha);
+ /* Write bit1=1 to Inbound DoorBell Register to tell the SPC FW the
+ table is stop */
+ pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPCv_MSGU_CFG_TABLE_RESET);
+
+ /* wait until Inbound DoorBell Clear Register toggled */
+ max_wait_count = 2 * 1000 * 1000; /* 2 sec for spcv/ve */
+ do {
+ udelay(1);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET);
+ value &= SPCv_MSGU_CFG_TABLE_RESET;
+ } while ((value != 0) && (--max_wait_count));
+
+ if (!max_wait_count) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("TIMEOUT:IBDB value/=%x\n", value));
+ return -1;
+ }
+
+ /* check the MPI-State for termination in progress */
+ /* wait until Inbound DoorBell Clear Register toggled */
+ max_wait_count = 2 * 1000 * 1000; /* 2 sec for spcv/ve */
+ do {
+ udelay(1);
+ gst_len_mpistate =
+ pm8001_mr32(pm8001_ha->general_stat_tbl_addr,
+ GST_GSTLEN_MPIS_OFFSET);
+ if (GST_MPI_STATE_UNINIT ==
+ (gst_len_mpistate & GST_MPI_STATE_MASK))
+ break;
+ } while (--max_wait_count);
+ if (!max_wait_count) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk(" TIME OUT MPI State = 0x%x\n",
+ gst_len_mpistate & GST_MPI_STATE_MASK));
+ return -1;
+ }
+
+ return 0;
+}
+
+/**
+ * pm8001_chip_soft_rst - soft reset the PM8001 chip, so that the clear all
+ * the FW register status to the originated status.
+ * @pm8001_ha: our hba card information
+ */
+
+static int
+pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 regval;
+ u32 bootloader_state;
+
+ /* Check if MPI is in ready state to reset */
+ if (mpi_uninit_check(pm8001_ha) != 0) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MPI state is not ready\n"));
+ return -1;
+ }
+
+ /* checked for reset register normal state; 0x0 */
+ regval = pm8001_cr32(pm8001_ha, 0, SPC_REG_SOFT_RESET);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("reset register before write : 0x%x\n", regval));
+
+ pm8001_cw32(pm8001_ha, 0, SPC_REG_SOFT_RESET, SPCv_NORMAL_RESET_VALUE);
+ mdelay(500);
+
+ regval = pm8001_cr32(pm8001_ha, 0, SPC_REG_SOFT_RESET);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("reset register after write 0x%x\n", regval));
+
+ if ((regval & SPCv_SOFT_RESET_READ_MASK) ==
+ SPCv_SOFT_RESET_NORMAL_RESET_OCCURED) {
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" soft reset successful [regval: 0x%x]\n",
+ regval));
+ } else {
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" soft reset failed [regval: 0x%x]\n",
+ regval));
+
+ /* check bootloader is successfully executed or in HDA mode */
+ bootloader_state =
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1) &
+ SCRATCH_PAD1_BOOTSTATE_MASK;
+
+ if (bootloader_state == SCRATCH_PAD1_BOOTSTATE_HDA_SEEPROM) {
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "Bootloader state - HDA mode SEEPROM\n"));
+ } else if (bootloader_state ==
+ SCRATCH_PAD1_BOOTSTATE_HDA_BOOTSTRAP) {
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "Bootloader state - HDA mode Bootstrap Pin\n"));
+ } else if (bootloader_state ==
+ SCRATCH_PAD1_BOOTSTATE_HDA_SOFTRESET) {
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "Bootloader state - HDA mode soft reset\n"));
+ } else if (bootloader_state ==
+ SCRATCH_PAD1_BOOTSTATE_CRIT_ERROR) {
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "Bootloader state-HDA mode critical error\n"));
+ }
+ return -EBUSY;
+ }
+
+ /* check the firmware status after reset */
+ if (-1 == check_fw_ready(pm8001_ha)) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Firmware is not ready!\n"));
+ return -EBUSY;
+ }
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SPCv soft reset Complete\n"));
+ return 0;
+}
+
+static void pm80xx_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 i;
+
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("chip reset start\n"));
+
+ /* do SPCv chip reset. */
+ pm8001_cw32(pm8001_ha, 0, SPC_REG_SOFT_RESET, 0x11);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SPC soft reset Complete\n"));
+
+ /* Check this ..whether delay is required or no */
+ /* delay 10 usec */
+ udelay(10);
+
+ /* wait for 20 msec until the firmware gets reloaded */
+ i = 20;
+ do {
+ mdelay(1);
+ } while ((--i) != 0);
+
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("chip reset finished\n"));
+}
+
+/**
+ * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm80xx_chip_intx_interrupt_enable(struct pm8001_hba_info *pm8001_ha)
+{
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
+}
+
+/**
+ * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm80xx_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha)
+{
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, ODMR_MASK_ALL);
+}
+
+/**
+ * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm80xx_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+#ifdef PM8001_USE_MSIX
+ u32 mask;
+ mask = (u32)(1 << vec);
+
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, (u32)(mask & 0xFFFFFFFF));
+ return;
+#endif
+ pm80xx_chip_intx_interrupt_enable(pm8001_ha);
+
+}
+
+/**
+ * pm8001_chip_interrupt_disable- disable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm80xx_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+#ifdef PM8001_USE_MSIX
+ u32 mask;
+ if (vec == 0xFF)
+ mask = 0xFFFFFFFF;
+ else
+ mask = (u32)(1 << vec);
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, (u32)(mask & 0xFFFFFFFF));
+ return;
+#endif
+ pm80xx_chip_intx_interrupt_disable(pm8001_ha);
+}
+
+static void pm80xx_send_abort_all(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_ha_dev)
+{
+ int res;
+ u32 ccb_tag;
+ struct pm8001_ccb_info *ccb;
+ struct sas_task *task = NULL;
+ struct task_abort_req task_abort;
+ struct inbound_queue_table *circularQ;
+ u32 opc = OPC_INB_SATA_ABORT;
+ int ret;
+
+ if (!pm8001_ha_dev) {
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("dev is null\n"));
+ return;
+ }
+
+ task = sas_alloc_slow_task(GFP_ATOMIC);
+
+ if (!task) {
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("cannot "
+ "allocate task\n"));
+ return;
+ }
+
+ task->task_done = pm8001_task_done;
+
+ res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
+ if (res)
+ return;
+
+ ccb = &pm8001_ha->ccb_info[ccb_tag];
+ ccb->device = pm8001_ha_dev;
+ ccb->ccb_tag = ccb_tag;
+ ccb->task = task;
+
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+
+ memset(&task_abort, 0, sizeof(task_abort));
+ task_abort.abort_all = cpu_to_le32(1);
+ task_abort.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
+ task_abort.tag = cpu_to_le32(ccb_tag);
+
+ ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &task_abort, 0);
+
+}
+
+static void pm80xx_send_read_log(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_ha_dev)
+{
+ struct sata_start_req sata_cmd;
+ int res;
+ u32 ccb_tag;
+ struct pm8001_ccb_info *ccb;
+ struct sas_task *task = NULL;
+ struct host_to_dev_fis fis;
+ struct domain_device *dev;
+ struct inbound_queue_table *circularQ;
+ u32 opc = OPC_INB_SATA_HOST_OPSTART;
+
+ task = sas_alloc_slow_task(GFP_ATOMIC);
+
+ if (!task) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("cannot allocate task !!!\n"));
+ return;
+ }
+ task->task_done = pm8001_task_done;
+
+ res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
+ if (res) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("cannot allocate tag !!!\n"));
+ return;
+ }
+
+ /* allocate domain device by ourselves as libsas
+ * is not going to provide any
+ */
+ dev = kzalloc(sizeof(struct domain_device), GFP_ATOMIC);
+ if (!dev) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Domain device cannot be allocated\n"));
+ sas_free_task(task);
+ return;
+ } else {
+ task->dev = dev;
+ task->dev->lldd_dev = pm8001_ha_dev;
+ }
+
+ ccb = &pm8001_ha->ccb_info[ccb_tag];
+ ccb->device = pm8001_ha_dev;
+ ccb->ccb_tag = ccb_tag;
+ ccb->task = task;
+ pm8001_ha_dev->id |= NCQ_READ_LOG_FLAG;
+ pm8001_ha_dev->id |= NCQ_2ND_RLE_FLAG;
+
+ memset(&sata_cmd, 0, sizeof(sata_cmd));
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+
+ /* construct read log FIS */
+ memset(&fis, 0, sizeof(struct host_to_dev_fis));
+ fis.fis_type = 0x27;
+ fis.flags = 0x80;
+ fis.command = ATA_CMD_READ_LOG_EXT;
+ fis.lbal = 0x10;
+ fis.sector_count = 0x1;
+
+ sata_cmd.tag = cpu_to_le32(ccb_tag);
+ sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
+ sata_cmd.ncqtag_atap_dir_m_dad |= ((0x1 << 7) | (0x5 << 9));
+ memcpy(&sata_cmd.sata_fis, &fis, sizeof(struct host_to_dev_fis));
+
+ res = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd, 0);
+
+}
+
+/**
+ * mpi_ssp_completion- process the event that FW response to the SSP request.
+ * @pm8001_ha: our hba card information
+ * @piomb: the message contents of this outbound message.
+ *
+ * When FW has completed a ssp request for example a IO request, after it has
+ * filled the SG data with the data, it will trigger this event represent
+ * that he has finished the job,please check the coresponding buffer.
+ * So we will tell the caller who maybe waiting the result to tell upper layer
+ * that the task has been finished.
+ */
+static void
+mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
+{
+ struct sas_task *t;
+ struct pm8001_ccb_info *ccb;
+ unsigned long flags;
+ u32 status;
+ u32 param;
+ u32 tag;
+ struct ssp_completion_resp *psspPayload;
+ struct task_status_struct *ts;
+ struct ssp_response_iu *iu;
+ struct pm8001_device *pm8001_dev;
+ psspPayload = (struct ssp_completion_resp *)(piomb + 4);
+ status = le32_to_cpu(psspPayload->status);
+ tag = le32_to_cpu(psspPayload->tag);
+ ccb = &pm8001_ha->ccb_info[tag];
+ if ((status == IO_ABORTED) && ccb->open_retry) {
+ /* Being completed by another */
+ ccb->open_retry = 0;
+ return;
+ }
+ pm8001_dev = ccb->device;
+ param = le32_to_cpu(psspPayload->param);
+ t = ccb->task;
+
+ if (status && status != IO_UNDERFLOW)
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("sas IO status 0x%x\n", status));
+ if (unlikely(!t || !t->lldd_task || !t->dev))
+ return;
+ ts = &t->task_status;
+ switch (status) {
+ case IO_SUCCESS:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_SUCCESS ,param = 0x%x\n",
+ param));
+ if (param == 0) {
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_STAT_GOOD;
+ } else {
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PROTO_RESPONSE;
+ ts->residual = param;
+ iu = &psspPayload->ssp_resp_iu;
+ sas_ssp_task_response(pm8001_ha->dev, t, iu);
+ }
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_ABORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_ABORTED IOMB Tag\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_ABORTED_TASK;
+ break;
+ case IO_UNDERFLOW:
+ /* SSP Completion with error */
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_UNDERFLOW ,param = 0x%x\n",
+ param));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_UNDERRUN;
+ ts->residual = param;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_NO_DEVICE:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_NO_DEVICE\n"));
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ break;
+ case IO_XFER_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ /* Force the midlayer to retry */
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_EPROTO;
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ if (!t->uldd_task)
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ break;
+ case IO_XFER_ERROR_NAK_RECEIVED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_ERROR_DMA:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_DMA\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_XFER_ERROR_OFFSET_MISMATCH:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_PORT_IN_RESET:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_PORT_IN_RESET\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_DS_NON_OPERATIONAL:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ if (!t->uldd_task)
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_DS_NON_OPERATIONAL);
+ break;
+ case IO_DS_IN_RECOVERY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_DS_IN_RECOVERY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_TM_TAG_NOT_FOUND:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_TM_TAG_NOT_FOUND\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_SSP_EXT_IU_ZERO_LEN_ERROR:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_SSP_EXT_IU_ZERO_LEN_ERROR\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ default:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("Unknown status 0x%x\n", status));
+ /* not allowed case. Therefore, return failed status */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ }
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("scsi_status = 0x%x\n ",
+ psspPayload->ssp_resp_iu.status));
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+ "task 0x%p done with io_status 0x%x resp 0x%x "
+ "stat 0x%x but aborted by upper layer!\n",
+ t, status, ts->resp, ts->stat));
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/* in order to force CPU ordering */
+ t->task_done(t);
+ }
+}
+
+/*See the comments for mpi_ssp_completion */
+static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
+{
+ struct sas_task *t;
+ unsigned long flags;
+ struct task_status_struct *ts;
+ struct pm8001_ccb_info *ccb;
+ struct pm8001_device *pm8001_dev;
+ struct ssp_event_resp *psspPayload =
+ (struct ssp_event_resp *)(piomb + 4);
+ u32 event = le32_to_cpu(psspPayload->event);
+ u32 tag = le32_to_cpu(psspPayload->tag);
+ u32 port_id = le32_to_cpu(psspPayload->port_id);
+
+ ccb = &pm8001_ha->ccb_info[tag];
+ t = ccb->task;
+ pm8001_dev = ccb->device;
+ if (event)
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("sas IO status 0x%x\n", event));
+ if (unlikely(!t || !t->lldd_task || !t->dev))
+ return;
+ ts = &t->task_status;
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("port_id:0x%x, tag:0x%x, event:0x%x\n",
+ port_id, tag, event));
+ switch (event) {
+ case IO_OVERFLOW:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n");)
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ ts->residual = 0;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_XFER_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ pm8001_handle_event(pm8001_ha, t, IO_XFER_ERROR_BREAK);
+ return;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_EPROTO;
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ if (!t->uldd_task)
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ break;
+ case IO_XFER_ERROR_NAK_RECEIVED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ pm8001_handle_event(pm8001_ha, t, IO_XFER_OPEN_RETRY_TIMEOUT);
+ return;
+ case IO_XFER_ERROR_UNEXPECTED_PHASE:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_XFER_RDY_OVERRUN:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_OFFSET_MISMATCH:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_INTERNAL_CRC_ERROR:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFR_ERROR_INTERNAL_CRC_ERROR\n"));
+ /* TBC: used default set values */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_CMD_FRAME_ISSUED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_CMD_FRAME_ISSUED\n"));
+ return;
+ default:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("Unknown status 0x%x\n", event));
+ /* not allowed case. Therefore, return failed status */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ }
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+ "task 0x%p done with event 0x%x resp 0x%x "
+ "stat 0x%x but aborted by upper layer!\n",
+ t, event, ts->resp, ts->stat));
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/* in order to force CPU ordering */
+ t->task_done(t);
+ }
+}
+
+/*See the comments for mpi_ssp_completion */
+static void
+mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct sas_task *t;
+ struct pm8001_ccb_info *ccb;
+ u32 param;
+ u32 status;
+ u32 tag;
+ struct sata_completion_resp *psataPayload;
+ struct task_status_struct *ts;
+ struct ata_task_resp *resp ;
+ u32 *sata_resp;
+ struct pm8001_device *pm8001_dev;
+ unsigned long flags;
+
+ psataPayload = (struct sata_completion_resp *)(piomb + 4);
+ status = le32_to_cpu(psataPayload->status);
+ tag = le32_to_cpu(psataPayload->tag);
+
+ if (!tag) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("tag null\n"));
+ return;
+ }
+ ccb = &pm8001_ha->ccb_info[tag];
+ param = le32_to_cpu(psataPayload->param);
+ if (ccb) {
+ t = ccb->task;
+ pm8001_dev = ccb->device;
+ } else {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("ccb null\n"));
+ return;
+ }
+
+ if (t) {
+ if (t->dev && (t->dev->lldd_dev))
+ pm8001_dev = t->dev->lldd_dev;
+ } else {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("task null\n"));
+ return;
+ }
+
+ if ((pm8001_dev && !(pm8001_dev->id & NCQ_READ_LOG_FLAG))
+ && unlikely(!t || !t->lldd_task || !t->dev)) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("task or dev null\n"));
+ return;
+ }
+
+ ts = &t->task_status;
+ if (!ts) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("ts null\n"));
+ return;
+ }
+
+ switch (status) {
+ case IO_SUCCESS:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
+ if (param == 0) {
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_STAT_GOOD;
+ /* check if response is for SEND READ LOG */
+ if (pm8001_dev &&
+ (pm8001_dev->id & NCQ_READ_LOG_FLAG)) {
+ /* set new bit for abort_all */
+ pm8001_dev->id |= NCQ_ABORT_ALL_FLAG;
+ /* clear bit for read log */
+ pm8001_dev->id = pm8001_dev->id & 0x7FFFFFFF;
+ pm80xx_send_abort_all(pm8001_ha, pm8001_dev);
+ /* Free the tag */
+ pm8001_tag_free(pm8001_ha, tag);
+ sas_free_task(t);
+ return;
+ }
+ } else {
+ u8 len;
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PROTO_RESPONSE;
+ ts->residual = param;
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("SAS_PROTO_RESPONSE len = %d\n",
+ param));
+ sata_resp = &psataPayload->sata_resp[0];
+ resp = (struct ata_task_resp *)ts->buf;
+ if (t->ata_task.dma_xfer == 0 &&
+ t->data_dir == PCI_DMA_FROMDEVICE) {
+ len = sizeof(struct pio_setup_fis);
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("PIO read len = %d\n", len));
+ } else if (t->ata_task.use_ncq) {
+ len = sizeof(struct set_dev_bits_fis);
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("FPDMA len = %d\n", len));
+ } else {
+ len = sizeof(struct dev_to_host_fis);
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("other len = %d\n", len));
+ }
+ if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) {
+ resp->frame_len = len;
+ memcpy(&resp->ending_fis[0], sata_resp, len);
+ ts->buf_valid_size = sizeof(*resp);
+ } else
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("response to large\n"));
+ }
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_ABORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_ABORTED IOMB Tag\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_ABORTED_TASK;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ /* following cases are to do cases */
+ case IO_UNDERFLOW:
+ /* SATA Completion with error */
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_UNDERFLOW param = %d\n", param));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_UNDERRUN;
+ ts->residual = param;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_NO_DEVICE:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_NO_DEVICE\n"));
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ break;
+ case IO_XFER_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_INTERRUPTED;
+ break;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_EPROTO;
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/*in order to force CPU ordering*/
+ spin_unlock_irq(&pm8001_ha->lock);
+ t->task_done(t);
+ spin_lock_irq(&pm8001_ha->lock);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/*ditto*/
+ spin_unlock_irq(&pm8001_ha->lock);
+ t->task_done(t);
+ spin_lock_irq(&pm8001_ha->lock);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ break;
+ case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/* ditto*/
+ spin_unlock_irq(&pm8001_ha->lock);
+ t->task_done(t);
+ spin_lock_irq(&pm8001_ha->lock);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ break;
+ case IO_XFER_ERROR_NAK_RECEIVED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_ERROR_DMA:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_DMA\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_ABORTED_TASK;
+ break;
+ case IO_XFER_ERROR_SATA_LINK_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_SATA_LINK_TIMEOUT\n"));
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ case IO_XFER_ERROR_REJECTED_NCQ_MODE:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_UNDERRUN;
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_PORT_IN_RESET:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_PORT_IN_RESET\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ case IO_DS_NON_OPERATIONAL:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha, pm8001_dev,
+ IO_DS_NON_OPERATIONAL);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/*ditto*/
+ spin_unlock_irq(&pm8001_ha->lock);
+ t->task_done(t);
+ spin_lock_irq(&pm8001_ha->lock);
+ return;
+ }
+ break;
+ case IO_DS_IN_RECOVERY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_DS_IN_RECOVERY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ case IO_DS_IN_ERROR:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_DS_IN_ERROR\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha, pm8001_dev,
+ IO_DS_IN_ERROR);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/*ditto*/
+ spin_unlock_irq(&pm8001_ha->lock);
+ t->task_done(t);
+ spin_lock_irq(&pm8001_ha->lock);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ default:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("Unknown status 0x%x\n", status));
+ /* not allowed case. Therefore, return failed status */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ }
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("task 0x%p done with io_status 0x%x"
+ " resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, status, ts->resp, ts->stat));
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ } else if (t->uldd_task) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/* ditto */
+ spin_unlock_irq(&pm8001_ha->lock);
+ t->task_done(t);
+ spin_lock_irq(&pm8001_ha->lock);
+ } else if (!t->uldd_task) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/*ditto*/
+ spin_unlock_irq(&pm8001_ha->lock);
+ t->task_done(t);
+ spin_lock_irq(&pm8001_ha->lock);
+ }
+}
+
+/*See the comments for mpi_ssp_completion */
+static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
+{
+ struct sas_task *t;
+ struct task_status_struct *ts;
+ struct pm8001_ccb_info *ccb;
+ struct pm8001_device *pm8001_dev;
+ struct sata_event_resp *psataPayload =
+ (struct sata_event_resp *)(piomb + 4);
+ u32 event = le32_to_cpu(psataPayload->event);
+ u32 tag = le32_to_cpu(psataPayload->tag);
+ u32 port_id = le32_to_cpu(psataPayload->port_id);
+ u32 dev_id = le32_to_cpu(psataPayload->device_id);
+ unsigned long flags;
+
+ ccb = &pm8001_ha->ccb_info[tag];
+
+ if (ccb) {
+ t = ccb->task;
+ pm8001_dev = ccb->device;
+ } else {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("No CCB !!!. returning\n"));
+ return;
+ }
+ if (event)
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("SATA EVENT 0x%x\n", event));
+
+ /* Check if this is NCQ error */
+ if (event == IO_XFER_ERROR_ABORTED_NCQ_MODE) {
+ /* find device using device id */
+ pm8001_dev = pm8001_find_dev(pm8001_ha, dev_id);
+ /* send read log extension */
+ if (pm8001_dev)
+ pm80xx_send_read_log(pm8001_ha, pm8001_dev);
+ return;
+ }
+
+ if (unlikely(!t || !t->lldd_task || !t->dev)) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("task or dev null\n"));
+ return;
+ }
+
+ ts = &t->task_status;
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("port_id:0x%x, tag:0x%x, event:0x%x\n",
+ port_id, tag, event));
+ switch (event) {
+ case IO_OVERFLOW:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ ts->residual = 0;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_XFER_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_INTERRUPTED;
+ break;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_EPROTO;
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/*ditto*/
+ spin_unlock_irq(&pm8001_ha->lock);
+ t->task_done(t);
+ spin_lock_irq(&pm8001_ha->lock);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ break;
+ case IO_XFER_ERROR_NAK_RECEIVED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_ERROR_PEER_ABORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_PEER_ABORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_ERROR_REJECTED_NCQ_MODE:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_UNDERRUN;
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_UNEXPECTED_PHASE:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_XFER_RDY_OVERRUN:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_OFFSET_MISMATCH:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_CMD_FRAME_ISSUED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_CMD_FRAME_ISSUED\n"));
+ break;
+ case IO_XFER_PIO_SETUP_ERROR:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_PIO_SETUP_ERROR\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_INTERNAL_CRC_ERROR:
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("IO_XFR_ERROR_INTERNAL_CRC_ERROR\n"));
+ /* TBC: used default set values */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_DMA_ACTIVATE_TIMEOUT:
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("IO_XFR_DMA_ACTIVATE_TIMEOUT\n"));
+ /* TBC: used default set values */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ default:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("Unknown status 0x%x\n", event));
+ /* not allowed case. Therefore, return failed status */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ }
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("task 0x%p done with io_status 0x%x"
+ " resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, event, ts->resp, ts->stat));
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ } else if (t->uldd_task) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/* ditto */
+ spin_unlock_irq(&pm8001_ha->lock);
+ t->task_done(t);
+ spin_lock_irq(&pm8001_ha->lock);
+ } else if (!t->uldd_task) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/*ditto*/
+ spin_unlock_irq(&pm8001_ha->lock);
+ t->task_done(t);
+ spin_lock_irq(&pm8001_ha->lock);
+ }
+}
+
+/*See the comments for mpi_ssp_completion */
+static void
+mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ u32 param, i;
+ struct sas_task *t;
+ struct pm8001_ccb_info *ccb;
+ unsigned long flags;
+ u32 status;
+ u32 tag;
+ struct smp_completion_resp *psmpPayload;
+ struct task_status_struct *ts;
+ struct pm8001_device *pm8001_dev;
+ char *pdma_respaddr = NULL;
+
+ psmpPayload = (struct smp_completion_resp *)(piomb + 4);
+ status = le32_to_cpu(psmpPayload->status);
+ tag = le32_to_cpu(psmpPayload->tag);
+
+ ccb = &pm8001_ha->ccb_info[tag];
+ param = le32_to_cpu(psmpPayload->param);
+ t = ccb->task;
+ ts = &t->task_status;
+ pm8001_dev = ccb->device;
+ if (status)
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("smp IO status 0x%x\n", status));
+ if (unlikely(!t || !t->lldd_task || !t->dev))
+ return;
+
+ switch (status) {
+
+ case IO_SUCCESS:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_STAT_GOOD;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ if (pm8001_ha->smp_exp_mode == SMP_DIRECT) {
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("DIRECT RESPONSE Length:%d\n",
+ param));
+ pdma_respaddr = (char *)(phys_to_virt(cpu_to_le64
+ ((u64)sg_dma_address
+ (&t->smp_task.smp_resp))));
+ for (i = 0; i < param; i++) {
+ *(pdma_respaddr+i) = psmpPayload->_r_a[i];
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "SMP Byte%d DMA data 0x%x psmp 0x%x\n",
+ i, *(pdma_respaddr+i),
+ psmpPayload->_r_a[i]));
+ }
+ }
+ break;
+ case IO_ABORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_ABORTED IOMB\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_ABORTED_TASK;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_OVERFLOW:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ ts->residual = 0;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_NO_DEVICE:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_NO_DEVICE\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PHY_DOWN;
+ break;
+ case IO_ERROR_HW_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_ERROR_HW_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_STAT_BUSY;
+ break;
+ case IO_XFER_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_STAT_BUSY;
+ break;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_STAT_BUSY;
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(\
+ "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ break;
+ case IO_XFER_ERROR_RX_FRAME:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_RX_FRAME\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_ERROR_INTERNAL_SMP_RESOURCE:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_ERROR_INTERNAL_SMP_RESOURCE\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_QUEUE_FULL;
+ break;
+ case IO_PORT_IN_RESET:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_PORT_IN_RESET\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_DS_NON_OPERATIONAL:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ case IO_DS_IN_RECOVERY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_DS_IN_RECOVERY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ default:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("Unknown status 0x%x\n", status));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ /* not allowed case. Therefore, return failed status */
+ break;
+ }
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+ "task 0x%p done with io_status 0x%x resp 0x%x"
+ "stat 0x%x but aborted by upper layer!\n",
+ t, status, ts->resp, ts->stat));
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/* in order to force CPU ordering */
+ t->task_done(t);
+ }
+}
+
+/**
+ * pm80xx_hw_event_ack_req- For PM8001,some events need to acknowage to FW.
+ * @pm8001_ha: our hba card information
+ * @Qnum: the outbound queue message number.
+ * @SEA: source of event to ack
+ * @port_id: port id.
+ * @phyId: phy id.
+ * @param0: parameter 0.
+ * @param1: parameter 1.
+ */
+static void pm80xx_hw_event_ack_req(struct pm8001_hba_info *pm8001_ha,
+ u32 Qnum, u32 SEA, u32 port_id, u32 phyId, u32 param0, u32 param1)
+{
+ struct hw_event_ack_req payload;
+ u32 opc = OPC_INB_SAS_HW_EVENT_ACK;
+
+ struct inbound_queue_table *circularQ;
+
+ memset((u8 *)&payload, 0, sizeof(payload));
+ circularQ = &pm8001_ha->inbnd_q_tbl[Qnum];
+ payload.tag = cpu_to_le32(1);
+ payload.phyid_sea_portid = cpu_to_le32(((SEA & 0xFFFF) << 8) |
+ ((phyId & 0xFF) << 24) | (port_id & 0xFF));
+ payload.param0 = cpu_to_le32(param0);
+ payload.param1 = cpu_to_le32(param1);
+ pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+}
+
+static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
+ u32 phyId, u32 phy_op);
+
+/**
+ * hw_event_sas_phy_up -FW tells me a SAS phy up event.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct hw_event_resp *pPayload =
+ (struct hw_event_resp *)(piomb + 4);
+ u32 lr_status_evt_portid =
+ le32_to_cpu(pPayload->lr_status_evt_portid);
+ u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate);
+
+ u8 link_rate =
+ (u8)((lr_status_evt_portid & 0xF0000000) >> 28);
+ u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF);
+ u8 phy_id =
+ (u8)((phyid_npip_portstate & 0xFF0000) >> 16);
+ u8 portstate = (u8)(phyid_npip_portstate & 0x0000000F);
+
+ struct pm8001_port *port = &pm8001_ha->port[port_id];
+ struct sas_ha_struct *sas_ha = pm8001_ha->sas;
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ unsigned long flags;
+ u8 deviceType = pPayload->sas_identify.dev_type;
+ port->port_state = portstate;
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "portid:%d; phyid:%d; linkrate:%d; "
+ "portstate:%x; devicetype:%x\n",
+ port_id, phy_id, link_rate, portstate, deviceType));
+
+ switch (deviceType) {
+ case SAS_PHY_UNUSED:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("device type no device.\n"));
+ break;
+ case SAS_END_DEVICE:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk("end device.\n"));
+ pm80xx_chip_phy_ctl_req(pm8001_ha, phy_id,
+ PHY_NOTIFY_ENABLE_SPINUP);
+ port->port_attached = 1;
+ pm8001_get_lrate_mode(phy, link_rate);
+ break;
+ case SAS_EDGE_EXPANDER_DEVICE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("expander device.\n"));
+ port->port_attached = 1;
+ pm8001_get_lrate_mode(phy, link_rate);
+ break;
+ case SAS_FANOUT_EXPANDER_DEVICE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("fanout expander device.\n"));
+ port->port_attached = 1;
+ pm8001_get_lrate_mode(phy, link_rate);
+ break;
+ default:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("unknown device type(%x)\n", deviceType));
+ break;
+ }
+ phy->phy_type |= PORT_TYPE_SAS;
+ phy->identify.device_type = deviceType;
+ phy->phy_attached = 1;
+ if (phy->identify.device_type == SAS_END_DEVICE)
+ phy->identify.target_port_protocols = SAS_PROTOCOL_SSP;
+ else if (phy->identify.device_type != SAS_PHY_UNUSED)
+ phy->identify.target_port_protocols = SAS_PROTOCOL_SMP;
+ phy->sas_phy.oob_mode = SAS_OOB_MODE;
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
+ spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+ memcpy(phy->frame_rcvd, &pPayload->sas_identify,
+ sizeof(struct sas_identify_frame)-4);
+ phy->frame_rcvd_size = sizeof(struct sas_identify_frame) - 4;
+ pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
+ spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+ if (pm8001_ha->flags == PM8001F_RUN_TIME)
+ mdelay(200);/*delay a moment to wait disk to spinup*/
+ pm8001_bytes_dmaed(pm8001_ha, phy_id);
+}
+
+/**
+ * hw_event_sata_phy_up -FW tells me a SATA phy up event.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct hw_event_resp *pPayload =
+ (struct hw_event_resp *)(piomb + 4);
+ u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate);
+ u32 lr_status_evt_portid =
+ le32_to_cpu(pPayload->lr_status_evt_portid);
+ u8 link_rate =
+ (u8)((lr_status_evt_portid & 0xF0000000) >> 28);
+ u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF);
+ u8 phy_id =
+ (u8)((phyid_npip_portstate & 0xFF0000) >> 16);
+
+ u8 portstate = (u8)(phyid_npip_portstate & 0x0000000F);
+
+ struct pm8001_port *port = &pm8001_ha->port[port_id];
+ struct sas_ha_struct *sas_ha = pm8001_ha->sas;
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ unsigned long flags;
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "port id %d, phy id %d link_rate %d portstate 0x%x\n",
+ port_id, phy_id, link_rate, portstate));
+
+ port->port_state = portstate;
+ port->port_attached = 1;
+ pm8001_get_lrate_mode(phy, link_rate);
+ phy->phy_type |= PORT_TYPE_SATA;
+ phy->phy_attached = 1;
+ phy->sas_phy.oob_mode = SATA_OOB_MODE;
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
+ spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+ memcpy(phy->frame_rcvd, ((u8 *)&pPayload->sata_fis - 4),
+ sizeof(struct dev_to_host_fis));
+ phy->frame_rcvd_size = sizeof(struct dev_to_host_fis);
+ phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
+ phy->identify.device_type = SAS_SATA_DEV;
+ pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
+ spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+ pm8001_bytes_dmaed(pm8001_ha, phy_id);
+}
+
+/**
+ * hw_event_phy_down -we should notify the libsas the phy is down.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct hw_event_resp *pPayload =
+ (struct hw_event_resp *)(piomb + 4);
+
+ u32 lr_status_evt_portid =
+ le32_to_cpu(pPayload->lr_status_evt_portid);
+ u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF);
+ u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate);
+ u8 phy_id =
+ (u8)((phyid_npip_portstate & 0xFF0000) >> 16);
+ u8 portstate = (u8)(phyid_npip_portstate & 0x0000000F);
+
+ struct pm8001_port *port = &pm8001_ha->port[port_id];
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ port->port_state = portstate;
+ phy->phy_type = 0;
+ phy->identify.device_type = 0;
+ phy->phy_attached = 0;
+ memset(&phy->dev_sas_addr, 0, SAS_ADDR_SIZE);
+ switch (portstate) {
+ case PORT_VALID:
+ break;
+ case PORT_INVALID:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" PortInvalid portID %d\n", port_id));
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" Last phy Down and port invalid\n"));
+ port->port_attached = 0;
+ pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
+ port_id, phy_id, 0, 0);
+ break;
+ case PORT_IN_RESET:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" Port In Reset portID %d\n", port_id));
+ break;
+ case PORT_NOT_ESTABLISHED:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" phy Down and PORT_NOT_ESTABLISHED\n"));
+ port->port_attached = 0;
+ break;
+ case PORT_LOSTCOMM:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" phy Down and PORT_LOSTCOMM\n"));
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" Last phy Down and port invalid\n"));
+ port->port_attached = 0;
+ pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
+ port_id, phy_id, 0, 0);
+ break;
+ default:
+ port->port_attached = 0;
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" phy Down and(default) = 0x%x\n",
+ portstate));
+ break;
+
+ }
+}
+
+static int mpi_phy_start_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct phy_start_resp *pPayload =
+ (struct phy_start_resp *)(piomb + 4);
+ u32 status =
+ le32_to_cpu(pPayload->status);
+ u32 phy_id =
+ le32_to_cpu(pPayload->phyid);
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("phy start resp status:0x%x, phyid:0x%x\n",
+ status, phy_id));
+ if (status == 0) {
+ phy->phy_state = 1;
+ if (pm8001_ha->flags == PM8001F_RUN_TIME)
+ complete(phy->enable_completion);
+ }
+ return 0;
+
+}
+
+/**
+ * mpi_thermal_hw_event -The hw event has come.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_thermal_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct thermal_hw_event *pPayload =
+ (struct thermal_hw_event *)(piomb + 4);
+
+ u32 thermal_event = le32_to_cpu(pPayload->thermal_event);
+ u32 rht_lht = le32_to_cpu(pPayload->rht_lht);
+
+ if (thermal_event & 0x40) {
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "Thermal Event: Local high temperature violated!\n"));
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "Thermal Event: Measured local high temperature %d\n",
+ ((rht_lht & 0xFF00) >> 8)));
+ }
+ if (thermal_event & 0x10) {
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "Thermal Event: Remote high temperature violated!\n"));
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "Thermal Event: Measured remote high temperature %d\n",
+ ((rht_lht & 0xFF000000) >> 24)));
+ }
+ return 0;
+}
+
+/**
+ * mpi_hw_event -The hw event has come.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ unsigned long flags;
+ struct hw_event_resp *pPayload =
+ (struct hw_event_resp *)(piomb + 4);
+ u32 lr_status_evt_portid =
+ le32_to_cpu(pPayload->lr_status_evt_portid);
+ u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate);
+ u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF);
+ u8 phy_id =
+ (u8)((phyid_npip_portstate & 0xFF0000) >> 16);
+ u16 eventType =
+ (u16)((lr_status_evt_portid & 0x00FFFF00) >> 8);
+ u8 status =
+ (u8)((lr_status_evt_portid & 0x0F000000) >> 24);
+
+ struct sas_ha_struct *sas_ha = pm8001_ha->sas;
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("portid:%d phyid:%d event:0x%x status:0x%x\n",
+ port_id, phy_id, eventType, status));
+
+ switch (eventType) {
+
+ case HW_EVENT_SAS_PHY_UP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PHY_START_STATUS\n"));
+ hw_event_sas_phy_up(pm8001_ha, piomb);
+ break;
+ case HW_EVENT_SATA_PHY_UP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_SATA_PHY_UP\n"));
+ hw_event_sata_phy_up(pm8001_ha, piomb);
+ break;
+ case HW_EVENT_SATA_SPINUP_HOLD:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_SATA_SPINUP_HOLD\n"));
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD);
+ break;
+ case HW_EVENT_PHY_DOWN:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PHY_DOWN\n"));
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL);
+ phy->phy_attached = 0;
+ phy->phy_state = 0;
+ hw_event_phy_down(pm8001_ha, piomb);
+ break;
+ case HW_EVENT_PORT_INVALID:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PORT_INVALID\n"));
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ /* the broadcast change primitive received, tell the LIBSAS this event
+ to revalidate the sas domain*/
+ case HW_EVENT_BROADCAST_CHANGE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_BROADCAST_CHANGE\n"));
+ pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_BROADCAST_CHANGE,
+ port_id, phy_id, 1, 0);
+ spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+ sas_phy->sas_prim = HW_EVENT_BROADCAST_CHANGE;
+ spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+ sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+ break;
+ case HW_EVENT_PHY_ERROR:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PHY_ERROR\n"));
+ sas_phy_disconnected(&phy->sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR);
+ break;
+ case HW_EVENT_BROADCAST_EXP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_BROADCAST_EXP\n"));
+ spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+ sas_phy->sas_prim = HW_EVENT_BROADCAST_EXP;
+ spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+ sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+ break;
+ case HW_EVENT_LINK_ERR_INVALID_DWORD:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_LINK_ERR_INVALID_DWORD\n"));
+ pm80xx_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_INVALID_DWORD, port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_LINK_ERR_DISPARITY_ERROR:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_LINK_ERR_DISPARITY_ERROR\n"));
+ pm80xx_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_DISPARITY_ERROR,
+ port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_LINK_ERR_CODE_VIOLATION:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_LINK_ERR_CODE_VIOLATION\n"));
+ pm80xx_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_CODE_VIOLATION,
+ port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH\n"));
+ pm80xx_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH,
+ port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_MALFUNCTION:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_MALFUNCTION\n"));
+ break;
+ case HW_EVENT_BROADCAST_SES:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_BROADCAST_SES\n"));
+ spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+ sas_phy->sas_prim = HW_EVENT_BROADCAST_SES;
+ spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+ sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+ break;
+ case HW_EVENT_INBOUND_CRC_ERROR:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_INBOUND_CRC_ERROR\n"));
+ pm80xx_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_INBOUND_CRC_ERROR,
+ port_id, phy_id, 0, 0);
+ break;
+ case HW_EVENT_HARD_RESET_RECEIVED:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_HARD_RESET_RECEIVED\n"));
+ sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET);
+ break;
+ case HW_EVENT_ID_FRAME_TIMEOUT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_ID_FRAME_TIMEOUT\n"));
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_LINK_ERR_PHY_RESET_FAILED:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_LINK_ERR_PHY_RESET_FAILED\n"));
+ pm80xx_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_PHY_RESET_FAILED,
+ port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_PORT_RESET_TIMER_TMO:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PORT_RESET_TIMER_TMO\n"));
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_PORT_RECOVERY_TIMER_TMO:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PORT_RECOVERY_TIMER_TMO\n"));
+ pm80xx_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_PORT_RECOVERY_TIMER_TMO,
+ port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_PORT_RECOVER:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PORT_RECOVER\n"));
+ break;
+ case HW_EVENT_PORT_RESET_COMPLETE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PORT_RESET_COMPLETE\n"));
+ break;
+ case EVENT_BROADCAST_ASYNCH_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("EVENT_BROADCAST_ASYNCH_EVENT\n"));
+ break;
+ default:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("Unknown event type 0x%x\n", eventType));
+ break;
+ }
+ return 0;
+}
+
+/**
+ * mpi_phy_stop_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_phy_stop_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct phy_stop_resp *pPayload =
+ (struct phy_stop_resp *)(piomb + 4);
+ u32 status =
+ le32_to_cpu(pPayload->status);
+ u32 phyid =
+ le32_to_cpu(pPayload->phyid);
+ struct pm8001_phy *phy = &pm8001_ha->phy[phyid];
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("phy:0x%x status:0x%x\n",
+ phyid, status));
+ if (status == 0)
+ phy->phy_state = 0;
+ return 0;
+}
+
+/**
+ * mpi_set_controller_config_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_set_controller_config_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ struct set_ctrl_cfg_resp *pPayload =
+ (struct set_ctrl_cfg_resp *)(piomb + 4);
+ u32 status = le32_to_cpu(pPayload->status);
+ u32 err_qlfr_pgcd = le32_to_cpu(pPayload->err_qlfr_pgcd);
+
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "SET CONTROLLER RESP: status 0x%x qlfr_pgcd 0x%x\n",
+ status, err_qlfr_pgcd));
+
+ return 0;
+}
+
+/**
+ * mpi_get_controller_config_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_get_controller_config_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" pm80xx_addition_functionality\n"));
+
+ return 0;
+}
+
+/**
+ * mpi_get_phy_profile_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_get_phy_profile_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" pm80xx_addition_functionality\n"));
+
+ return 0;
+}
+
+/**
+ * mpi_flash_op_ext_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_flash_op_ext_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" pm80xx_addition_functionality\n"));
+
+ return 0;
+}
+
+/**
+ * mpi_set_phy_profile_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_set_phy_profile_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" pm80xx_addition_functionality\n"));
+
+ return 0;
+}
+
+/**
+ * mpi_kek_management_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_kek_management_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ struct kek_mgmt_resp *pPayload = (struct kek_mgmt_resp *)(piomb + 4);
+
+ u32 status = le32_to_cpu(pPayload->status);
+ u32 kidx_new_curr_ksop = le32_to_cpu(pPayload->kidx_new_curr_ksop);
+ u32 err_qlfr = le32_to_cpu(pPayload->err_qlfr);
+
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "KEK MGMT RESP. Status 0x%x idx_ksop 0x%x err_qlfr 0x%x\n",
+ status, kidx_new_curr_ksop, err_qlfr));
+
+ return 0;
+}
+
+/**
+ * mpi_dek_management_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_dek_management_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" pm80xx_addition_functionality\n"));
+
+ return 0;
+}
+
+/**
+ * ssp_coalesced_comp_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int ssp_coalesced_comp_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" pm80xx_addition_functionality\n"));
+
+ return 0;
+}
+
+/**
+ * process_one_iomb - process one outbound Queue memory block
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ __le32 pHeader = *(__le32 *)piomb;
+ u32 opc = (u32)((le32_to_cpu(pHeader)) & 0xFFF);
+
+ switch (opc) {
+ case OPC_OUB_ECHO:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk("OPC_OUB_ECHO\n"));
+ break;
+ case OPC_OUB_HW_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_HW_EVENT\n"));
+ mpi_hw_event(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_THERM_HW_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_THERMAL_EVENT\n"));
+ mpi_thermal_hw_event(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SSP_COMP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SSP_COMP\n"));
+ mpi_ssp_completion(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SMP_COMP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SMP_COMP\n"));
+ mpi_smp_completion(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_LOCAL_PHY_CNTRL:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_LOCAL_PHY_CNTRL\n"));
+ pm8001_mpi_local_phy_ctl(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEV_REGIST:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_DEV_REGIST\n"));
+ pm8001_mpi_reg_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEREG_DEV:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("unresgister the deviece\n"));
+ pm8001_mpi_dereg_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GET_DEV_HANDLE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_GET_DEV_HANDLE\n"));
+ break;
+ case OPC_OUB_SATA_COMP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SATA_COMP\n"));
+ mpi_sata_completion(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SATA_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SATA_EVENT\n"));
+ mpi_sata_event(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SSP_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SSP_EVENT\n"));
+ mpi_ssp_event(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEV_HANDLE_ARRIV:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_DEV_HANDLE_ARRIV\n"));
+ /*This is for target*/
+ break;
+ case OPC_OUB_SSP_RECV_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SSP_RECV_EVENT\n"));
+ /*This is for target*/
+ break;
+ case OPC_OUB_FW_FLASH_UPDATE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_FW_FLASH_UPDATE\n"));
+ pm8001_mpi_fw_flash_update_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GPIO_RESPONSE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_GPIO_RESPONSE\n"));
+ break;
+ case OPC_OUB_GPIO_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_GPIO_EVENT\n"));
+ break;
+ case OPC_OUB_GENERAL_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_GENERAL_EVENT\n"));
+ pm8001_mpi_general_event(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SSP_ABORT_RSP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SSP_ABORT_RSP\n"));
+ pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SATA_ABORT_RSP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SATA_ABORT_RSP\n"));
+ pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SAS_DIAG_MODE_START_END:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SAS_DIAG_MODE_START_END\n"));
+ break;
+ case OPC_OUB_SAS_DIAG_EXECUTE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SAS_DIAG_EXECUTE\n"));
+ break;
+ case OPC_OUB_GET_TIME_STAMP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_GET_TIME_STAMP\n"));
+ break;
+ case OPC_OUB_SAS_HW_EVENT_ACK:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SAS_HW_EVENT_ACK\n"));
+ break;
+ case OPC_OUB_PORT_CONTROL:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_PORT_CONTROL\n"));
+ break;
+ case OPC_OUB_SMP_ABORT_RSP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SMP_ABORT_RSP\n"));
+ pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GET_NVMD_DATA:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_GET_NVMD_DATA\n"));
+ pm8001_mpi_get_nvmd_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SET_NVMD_DATA:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SET_NVMD_DATA\n"));
+ pm8001_mpi_set_nvmd_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEVICE_HANDLE_REMOVAL:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_DEVICE_HANDLE_REMOVAL\n"));
+ break;
+ case OPC_OUB_SET_DEVICE_STATE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SET_DEVICE_STATE\n"));
+ pm8001_mpi_set_dev_state_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GET_DEVICE_STATE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_GET_DEVICE_STATE\n"));
+ break;
+ case OPC_OUB_SET_DEV_INFO:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SET_DEV_INFO\n"));
+ break;
+ /* spcv specifc commands */
+ case OPC_OUB_PHY_START_RESP:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "OPC_OUB_PHY_START_RESP opcode:%x\n", opc));
+ mpi_phy_start_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_PHY_STOP_RESP:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "OPC_OUB_PHY_STOP_RESP opcode:%x\n", opc));
+ mpi_phy_stop_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SET_CONTROLLER_CONFIG:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "OPC_OUB_SET_CONTROLLER_CONFIG opcode:%x\n", opc));
+ mpi_set_controller_config_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GET_CONTROLLER_CONFIG:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "OPC_OUB_GET_CONTROLLER_CONFIG opcode:%x\n", opc));
+ mpi_get_controller_config_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GET_PHY_PROFILE:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "OPC_OUB_GET_PHY_PROFILE opcode:%x\n", opc));
+ mpi_get_phy_profile_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_FLASH_OP_EXT:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "OPC_OUB_FLASH_OP_EXT opcode:%x\n", opc));
+ mpi_flash_op_ext_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SET_PHY_PROFILE:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "OPC_OUB_SET_PHY_PROFILE opcode:%x\n", opc));
+ mpi_set_phy_profile_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_KEK_MANAGEMENT_RESP:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "OPC_OUB_KEK_MANAGEMENT_RESP opcode:%x\n", opc));
+ mpi_kek_management_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEK_MANAGEMENT_RESP:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "OPC_OUB_DEK_MANAGEMENT_RESP opcode:%x\n", opc));
+ mpi_dek_management_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SSP_COALESCED_COMP_RESP:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "OPC_OUB_SSP_COALESCED_COMP_RESP opcode:%x\n", opc));
+ ssp_coalesced_comp_resp(pm8001_ha, piomb);
+ break;
+ default:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "Unknown outbound Queue IOMB OPC = 0x%x\n", opc));
+ break;
+ }
+}
+
+static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+ struct outbound_queue_table *circularQ;
+ void *pMsg1 = NULL;
+ u8 uninitialized_var(bc);
+ u32 ret = MPI_IO_STATUS_FAIL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ circularQ = &pm8001_ha->outbnd_q_tbl[vec];
+ do {
+ ret = pm8001_mpi_msg_consume(pm8001_ha, circularQ, &pMsg1, &bc);
+ if (MPI_IO_STATUS_SUCCESS == ret) {
+ /* process the outbound message */
+ process_one_iomb(pm8001_ha, (void *)(pMsg1 - 4));
+ /* free the message from the outbound circular buffer */
+ pm8001_mpi_msg_free_set(pm8001_ha, pMsg1,
+ circularQ, bc);
+ }
+ if (MPI_IO_STATUS_BUSY == ret) {
+ /* Update the producer index from SPC */
+ circularQ->producer_index =
+ cpu_to_le32(pm8001_read_32(circularQ->pi_virt));
+ if (le32_to_cpu(circularQ->producer_index) ==
+ circularQ->consumer_idx)
+ /* OQ is empty */
+ break;
+ }
+ } while (1);
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ return ret;
+}
+
+/* PCI_DMA_... to our direction translation. */
+static const u8 data_dir_flags[] = {
+ [PCI_DMA_BIDIRECTIONAL] = DATA_DIR_BYRECIPIENT,/* UNSPECIFIED */
+ [PCI_DMA_TODEVICE] = DATA_DIR_OUT,/* OUTBOUND */
+ [PCI_DMA_FROMDEVICE] = DATA_DIR_IN,/* INBOUND */
+ [PCI_DMA_NONE] = DATA_DIR_NONE,/* NO TRANSFER */
+};
+
+static void build_smp_cmd(u32 deviceID, __le32 hTag,
+ struct smp_req *psmp_cmd, int mode, int length)
+{
+ psmp_cmd->tag = hTag;
+ psmp_cmd->device_id = cpu_to_le32(deviceID);
+ if (mode == SMP_DIRECT) {
+ length = length - 4; /* subtract crc */
+ psmp_cmd->len_ip_ir = cpu_to_le32(length << 16);
+ } else {
+ psmp_cmd->len_ip_ir = cpu_to_le32(1|(1 << 1));
+ }
+}
+
+/**
+ * pm8001_chip_smp_req - send a SMP task to FW
+ * @pm8001_ha: our hba card information.
+ * @ccb: the ccb information this request used.
+ */
+static int pm80xx_chip_smp_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ int elem, rc;
+ struct sas_task *task = ccb->task;
+ struct domain_device *dev = task->dev;
+ struct pm8001_device *pm8001_dev = dev->lldd_dev;
+ struct scatterlist *sg_req, *sg_resp;
+ u32 req_len, resp_len;
+ struct smp_req smp_cmd;
+ u32 opc;
+ struct inbound_queue_table *circularQ;
+ char *preq_dma_addr = NULL;
+ __le64 tmp_addr;
+ u32 i, length;
+
+ memset(&smp_cmd, 0, sizeof(smp_cmd));
+ /*
+ * DMA-map SMP request, response buffers
+ */
+ sg_req = &task->smp_task.smp_req;
+ elem = dma_map_sg(pm8001_ha->dev, sg_req, 1, PCI_DMA_TODEVICE);
+ if (!elem)
+ return -ENOMEM;
+ req_len = sg_dma_len(sg_req);
+
+ sg_resp = &task->smp_task.smp_resp;
+ elem = dma_map_sg(pm8001_ha->dev, sg_resp, 1, PCI_DMA_FROMDEVICE);
+ if (!elem) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ resp_len = sg_dma_len(sg_resp);
+ /* must be in dwords */
+ if ((req_len & 0x3) || (resp_len & 0x3)) {
+ rc = -EINVAL;
+ goto err_out_2;
+ }
+
+ opc = OPC_INB_SMP_REQUEST;
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ smp_cmd.tag = cpu_to_le32(ccb->ccb_tag);
+
+ length = sg_req->length;
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("SMP Frame Length %d\n", sg_req->length));
+ if (!(length - 8))
+ pm8001_ha->smp_exp_mode = SMP_DIRECT;
+ else
+ pm8001_ha->smp_exp_mode = SMP_INDIRECT;
+
+ /* DIRECT MODE support only in spcv/ve */
+ pm8001_ha->smp_exp_mode = SMP_DIRECT;
+
+ tmp_addr = cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_req));
+ preq_dma_addr = (char *)phys_to_virt(tmp_addr);
+
+ /* INDIRECT MODE command settings. Use DMA */
+ if (pm8001_ha->smp_exp_mode == SMP_INDIRECT) {
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("SMP REQUEST INDIRECT MODE\n"));
+ /* for SPCv indirect mode. Place the top 4 bytes of
+ * SMP Request header here. */
+ for (i = 0; i < 4; i++)
+ smp_cmd.smp_req16[i] = *(preq_dma_addr + i);
+ /* exclude top 4 bytes for SMP req header */
+ smp_cmd.long_smp_req.long_req_addr =
+ cpu_to_le64((u64)sg_dma_address
+ (&task->smp_task.smp_req) - 4);
+ /* exclude 4 bytes for SMP req header and CRC */
+ smp_cmd.long_smp_req.long_req_size =
+ cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_req)-8);
+ smp_cmd.long_smp_req.long_resp_addr =
+ cpu_to_le64((u64)sg_dma_address
+ (&task->smp_task.smp_resp));
+ smp_cmd.long_smp_req.long_resp_size =
+ cpu_to_le32((u32)sg_dma_len
+ (&task->smp_task.smp_resp)-4);
+ } else { /* DIRECT MODE */
+ smp_cmd.long_smp_req.long_req_addr =
+ cpu_to_le64((u64)sg_dma_address
+ (&task->smp_task.smp_req));
+ smp_cmd.long_smp_req.long_req_size =
+ cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_req)-4);
+ smp_cmd.long_smp_req.long_resp_addr =
+ cpu_to_le64((u64)sg_dma_address
+ (&task->smp_task.smp_resp));
+ smp_cmd.long_smp_req.long_resp_size =
+ cpu_to_le32
+ ((u32)sg_dma_len(&task->smp_task.smp_resp)-4);
+ }
+ if (pm8001_ha->smp_exp_mode == SMP_DIRECT) {
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("SMP REQUEST DIRECT MODE\n"));
+ for (i = 0; i < length; i++)
+ if (i < 16) {
+ smp_cmd.smp_req16[i] = *(preq_dma_addr+i);
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "Byte[%d]:%x (DMA data:%x)\n",
+ i, smp_cmd.smp_req16[i],
+ *(preq_dma_addr)));
+ } else {
+ smp_cmd.smp_req[i] = *(preq_dma_addr+i);
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "Byte[%d]:%x (DMA data:%x)\n",
+ i, smp_cmd.smp_req[i],
+ *(preq_dma_addr)));
+ }
+ }
+
+ build_smp_cmd(pm8001_dev->device_id, smp_cmd.tag,
+ &smp_cmd, pm8001_ha->smp_exp_mode, length);
+ pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, (u32 *)&smp_cmd, 0);
+ return 0;
+
+err_out_2:
+ dma_unmap_sg(pm8001_ha->dev, &ccb->task->smp_task.smp_resp, 1,
+ PCI_DMA_FROMDEVICE);
+err_out:
+ dma_unmap_sg(pm8001_ha->dev, &ccb->task->smp_task.smp_req, 1,
+ PCI_DMA_TODEVICE);
+ return rc;
+}
+
+static int check_enc_sas_cmd(struct sas_task *task)
+{
+ if ((task->ssp_task.cdb[0] == READ_10)
+ || (task->ssp_task.cdb[0] == WRITE_10)
+ || (task->ssp_task.cdb[0] == WRITE_VERIFY))
+ return 1;
+ else
+ return 0;
+}
+
+static int check_enc_sat_cmd(struct sas_task *task)
+{
+ int ret = 0;
+ switch (task->ata_task.fis.command) {
+ case ATA_CMD_FPDMA_READ:
+ case ATA_CMD_READ_EXT:
+ case ATA_CMD_READ:
+ case ATA_CMD_FPDMA_WRITE:
+ case ATA_CMD_WRITE_EXT:
+ case ATA_CMD_WRITE:
+ case ATA_CMD_PIO_READ:
+ case ATA_CMD_PIO_READ_EXT:
+ case ATA_CMD_PIO_WRITE:
+ case ATA_CMD_PIO_WRITE_EXT:
+ ret = 1;
+ break;
+ default:
+ ret = 0;
+ break;
+ }
+ return ret;
+}
+
+/**
+ * pm80xx_chip_ssp_io_req - send a SSP task to FW
+ * @pm8001_ha: our hba card information.
+ * @ccb: the ccb information this request used.
+ */
+static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ struct sas_task *task = ccb->task;
+ struct domain_device *dev = task->dev;
+ struct pm8001_device *pm8001_dev = dev->lldd_dev;
+ struct ssp_ini_io_start_req ssp_cmd;
+ u32 tag = ccb->ccb_tag;
+ int ret;
+ u64 phys_addr;
+ struct inbound_queue_table *circularQ;
+ static u32 inb;
+ static u32 outb;
+ u32 opc = OPC_INB_SSPINIIOSTART;
+ memset(&ssp_cmd, 0, sizeof(ssp_cmd));
+ memcpy(ssp_cmd.ssp_iu.lun, task->ssp_task.LUN, 8);
+ /* data address domain added for spcv; set to 0 by host,
+ * used internally by controller
+ * 0 for SAS 1.1 and SAS 2.0 compatible TLR
+ */
+ ssp_cmd.dad_dir_m_tlr =
+ cpu_to_le32(data_dir_flags[task->data_dir] << 8 | 0x0);
+ ssp_cmd.data_len = cpu_to_le32(task->total_xfer_len);
+ ssp_cmd.device_id = cpu_to_le32(pm8001_dev->device_id);
+ ssp_cmd.tag = cpu_to_le32(tag);
+ if (task->ssp_task.enable_first_burst)
+ ssp_cmd.ssp_iu.efb_prio_attr |= 0x80;
+ ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_prio << 3);
+ ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_attr & 7);
+ memcpy(ssp_cmd.ssp_iu.cdb, task->ssp_task.cdb, 16);
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+
+ /* Check if encryption is set */
+ if (pm8001_ha->chip->encrypt &&
+ !(pm8001_ha->encrypt_info.status) && check_enc_sas_cmd(task)) {
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "Encryption enabled.Sending Encrypt SAS command 0x%x\n",
+ task->ssp_task.cdb[0]));
+ opc = OPC_INB_SSP_INI_DIF_ENC_IO;
+ /* enable encryption. 0 for SAS 1.1 and SAS 2.0 compatible TLR*/
+ ssp_cmd.dad_dir_m_tlr = cpu_to_le32
+ ((data_dir_flags[task->data_dir] << 8) | 0x20 | 0x0);
+
+ /* fill in PRD (scatter/gather) table, if any */
+ if (task->num_scatter > 1) {
+ pm8001_chip_make_sg(task->scatter,
+ ccb->n_elem, ccb->buf_prd);
+ phys_addr = ccb->ccb_dma_handle +
+ offsetof(struct pm8001_ccb_info, buf_prd[0]);
+ ssp_cmd.enc_addr_low =
+ cpu_to_le32(lower_32_bits(phys_addr));
+ ssp_cmd.enc_addr_high =
+ cpu_to_le32(upper_32_bits(phys_addr));
+ ssp_cmd.enc_esgl = cpu_to_le32(1<<31);
+ } else if (task->num_scatter == 1) {
+ u64 dma_addr = sg_dma_address(task->scatter);
+ ssp_cmd.enc_addr_low =
+ cpu_to_le32(lower_32_bits(dma_addr));
+ ssp_cmd.enc_addr_high =
+ cpu_to_le32(upper_32_bits(dma_addr));
+ ssp_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
+ ssp_cmd.enc_esgl = 0;
+ } else if (task->num_scatter == 0) {
+ ssp_cmd.enc_addr_low = 0;
+ ssp_cmd.enc_addr_high = 0;
+ ssp_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
+ ssp_cmd.enc_esgl = 0;
+ }
+ /* XTS mode. All other fields are 0 */
+ ssp_cmd.key_cmode = 0x6 << 4;
+ /* set tweak values. Should be the start lba */
+ ssp_cmd.twk_val0 = cpu_to_le32((task->ssp_task.cdb[2] << 24) |
+ (task->ssp_task.cdb[3] << 16) |
+ (task->ssp_task.cdb[4] << 8) |
+ (task->ssp_task.cdb[5]));
+ } else {
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "Sending Normal SAS command 0x%x inb q %x\n",
+ task->ssp_task.cdb[0], inb));
+ /* fill in PRD (scatter/gather) table, if any */
+ if (task->num_scatter > 1) {
+ pm8001_chip_make_sg(task->scatter, ccb->n_elem,
+ ccb->buf_prd);
+ phys_addr = ccb->ccb_dma_handle +
+ offsetof(struct pm8001_ccb_info, buf_prd[0]);
+ ssp_cmd.addr_low =
+ cpu_to_le32(lower_32_bits(phys_addr));
+ ssp_cmd.addr_high =
+ cpu_to_le32(upper_32_bits(phys_addr));
+ ssp_cmd.esgl = cpu_to_le32(1<<31);
+ } else if (task->num_scatter == 1) {
+ u64 dma_addr = sg_dma_address(task->scatter);
+ ssp_cmd.addr_low = cpu_to_le32(lower_32_bits(dma_addr));
+ ssp_cmd.addr_high =
+ cpu_to_le32(upper_32_bits(dma_addr));
+ ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
+ ssp_cmd.esgl = 0;
+ } else if (task->num_scatter == 0) {
+ ssp_cmd.addr_low = 0;
+ ssp_cmd.addr_high = 0;
+ ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
+ ssp_cmd.esgl = 0;
+ }
+ }
+ ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &ssp_cmd, outb++);
+
+ /* rotate the outb queue */
+ outb = outb%PM8001_MAX_SPCV_OUTB_NUM;
+
+ return ret;
+}
+
+static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ struct sas_task *task = ccb->task;
+ struct domain_device *dev = task->dev;
+ struct pm8001_device *pm8001_ha_dev = dev->lldd_dev;
+ u32 tag = ccb->ccb_tag;
+ int ret;
+ static u32 inb;
+ static u32 outb;
+ struct sata_start_req sata_cmd;
+ u32 hdr_tag, ncg_tag = 0;
+ u64 phys_addr;
+ u32 ATAP = 0x0;
+ u32 dir;
+ struct inbound_queue_table *circularQ;
+ unsigned long flags;
+ u32 opc = OPC_INB_SATA_HOST_OPSTART;
+ memset(&sata_cmd, 0, sizeof(sata_cmd));
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+
+ if (task->data_dir == PCI_DMA_NONE) {
+ ATAP = 0x04; /* no data*/
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("no data\n"));
+ } else if (likely(!task->ata_task.device_control_reg_update)) {
+ if (task->ata_task.dma_xfer) {
+ ATAP = 0x06; /* DMA */
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("DMA\n"));
+ } else {
+ ATAP = 0x05; /* PIO*/
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("PIO\n"));
+ }
+ if (task->ata_task.use_ncq &&
+ dev->sata_dev.command_set != ATAPI_COMMAND_SET) {
+ ATAP = 0x07; /* FPDMA */
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("FPDMA\n"));
+ }
+ }
+ if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) {
+ task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3);
+ ncg_tag = hdr_tag;
+ }
+ dir = data_dir_flags[task->data_dir] << 8;
+ sata_cmd.tag = cpu_to_le32(tag);
+ sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
+ sata_cmd.data_len = cpu_to_le32(task->total_xfer_len);
+
+ sata_cmd.sata_fis = task->ata_task.fis;
+ if (likely(!task->ata_task.device_control_reg_update))
+ sata_cmd.sata_fis.flags |= 0x80;/* C=1: update ATA cmd reg */
+ sata_cmd.sata_fis.flags &= 0xF0;/* PM_PORT field shall be 0 */
+
+ /* Check if encryption is set */
+ if (pm8001_ha->chip->encrypt &&
+ !(pm8001_ha->encrypt_info.status) && check_enc_sat_cmd(task)) {
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "Encryption enabled.Sending Encrypt SATA cmd 0x%x\n",
+ sata_cmd.sata_fis.command));
+ opc = OPC_INB_SATA_DIF_ENC_IO;
+
+ /* set encryption bit */
+ sata_cmd.ncqtag_atap_dir_m_dad =
+ cpu_to_le32(((ncg_tag & 0xff)<<16)|
+ ((ATAP & 0x3f) << 10) | 0x20 | dir);
+ /* dad (bit 0-1) is 0 */
+ /* fill in PRD (scatter/gather) table, if any */
+ if (task->num_scatter > 1) {
+ pm8001_chip_make_sg(task->scatter,
+ ccb->n_elem, ccb->buf_prd);
+ phys_addr = ccb->ccb_dma_handle +
+ offsetof(struct pm8001_ccb_info, buf_prd[0]);
+ sata_cmd.enc_addr_low = lower_32_bits(phys_addr);
+ sata_cmd.enc_addr_high = upper_32_bits(phys_addr);
+ sata_cmd.enc_esgl = cpu_to_le32(1 << 31);
+ } else if (task->num_scatter == 1) {
+ u64 dma_addr = sg_dma_address(task->scatter);
+ sata_cmd.enc_addr_low = lower_32_bits(dma_addr);
+ sata_cmd.enc_addr_high = upper_32_bits(dma_addr);
+ sata_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
+ sata_cmd.enc_esgl = 0;
+ } else if (task->num_scatter == 0) {
+ sata_cmd.enc_addr_low = 0;
+ sata_cmd.enc_addr_high = 0;
+ sata_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
+ sata_cmd.enc_esgl = 0;
+ }
+ /* XTS mode. All other fields are 0 */
+ sata_cmd.key_index_mode = 0x6 << 4;
+ /* set tweak values. Should be the start lba */
+ sata_cmd.twk_val0 =
+ cpu_to_le32((sata_cmd.sata_fis.lbal_exp << 24) |
+ (sata_cmd.sata_fis.lbah << 16) |
+ (sata_cmd.sata_fis.lbam << 8) |
+ (sata_cmd.sata_fis.lbal));
+ sata_cmd.twk_val1 =
+ cpu_to_le32((sata_cmd.sata_fis.lbah_exp << 8) |
+ (sata_cmd.sata_fis.lbam_exp));
+ } else {
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "Sending Normal SATA command 0x%x inb %x\n",
+ sata_cmd.sata_fis.command, inb));
+ /* dad (bit 0-1) is 0 */
+ sata_cmd.ncqtag_atap_dir_m_dad =
+ cpu_to_le32(((ncg_tag & 0xff)<<16) |
+ ((ATAP & 0x3f) << 10) | dir);
+
+ /* fill in PRD (scatter/gather) table, if any */
+ if (task->num_scatter > 1) {
+ pm8001_chip_make_sg(task->scatter,
+ ccb->n_elem, ccb->buf_prd);
+ phys_addr = ccb->ccb_dma_handle +
+ offsetof(struct pm8001_ccb_info, buf_prd[0]);
+ sata_cmd.addr_low = lower_32_bits(phys_addr);
+ sata_cmd.addr_high = upper_32_bits(phys_addr);
+ sata_cmd.esgl = cpu_to_le32(1 << 31);
+ } else if (task->num_scatter == 1) {
+ u64 dma_addr = sg_dma_address(task->scatter);
+ sata_cmd.addr_low = lower_32_bits(dma_addr);
+ sata_cmd.addr_high = upper_32_bits(dma_addr);
+ sata_cmd.len = cpu_to_le32(task->total_xfer_len);
+ sata_cmd.esgl = 0;
+ } else if (task->num_scatter == 0) {
+ sata_cmd.addr_low = 0;
+ sata_cmd.addr_high = 0;
+ sata_cmd.len = cpu_to_le32(task->total_xfer_len);
+ sata_cmd.esgl = 0;
+ }
+ /* scsi cdb */
+ sata_cmd.atapi_scsi_cdb[0] =
+ cpu_to_le32(((task->ata_task.atapi_packet[0]) |
+ (task->ata_task.atapi_packet[1] << 8) |
+ (task->ata_task.atapi_packet[2] << 16) |
+ (task->ata_task.atapi_packet[3] << 24)));
+ sata_cmd.atapi_scsi_cdb[1] =
+ cpu_to_le32(((task->ata_task.atapi_packet[4]) |
+ (task->ata_task.atapi_packet[5] << 8) |
+ (task->ata_task.atapi_packet[6] << 16) |
+ (task->ata_task.atapi_packet[7] << 24)));
+ sata_cmd.atapi_scsi_cdb[2] =
+ cpu_to_le32(((task->ata_task.atapi_packet[8]) |
+ (task->ata_task.atapi_packet[9] << 8) |
+ (task->ata_task.atapi_packet[10] << 16) |
+ (task->ata_task.atapi_packet[11] << 24)));
+ sata_cmd.atapi_scsi_cdb[3] =
+ cpu_to_le32(((task->ata_task.atapi_packet[12]) |
+ (task->ata_task.atapi_packet[13] << 8) |
+ (task->ata_task.atapi_packet[14] << 16) |
+ (task->ata_task.atapi_packet[15] << 24)));
+ }
+
+ /* Check for read log for failed drive and return */
+ if (sata_cmd.sata_fis.command == 0x2f) {
+ if (pm8001_ha_dev && ((pm8001_ha_dev->id & NCQ_READ_LOG_FLAG) ||
+ (pm8001_ha_dev->id & NCQ_ABORT_ALL_FLAG) ||
+ (pm8001_ha_dev->id & NCQ_2ND_RLE_FLAG))) {
+ struct task_status_struct *ts;
+
+ pm8001_ha_dev->id &= 0xDFFFFFFF;
+ ts = &task->task_status;
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_STAT_GOOD;
+ task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((task->task_state_flags &
+ SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&task->task_state_lock,
+ flags);
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("task 0x%p resp 0x%x "
+ " stat 0x%x but aborted by upper layer "
+ "\n", task, ts->resp, ts->stat));
+ pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
+ return 0;
+ } else if (task->uldd_task) {
+ spin_unlock_irqrestore(&task->task_state_lock,
+ flags);
+ pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
+ mb();/* ditto */
+ spin_unlock_irq(&pm8001_ha->lock);
+ task->task_done(task);
+ spin_lock_irq(&pm8001_ha->lock);
+ return 0;
+ } else if (!task->uldd_task) {
+ spin_unlock_irqrestore(&task->task_state_lock,
+ flags);
+ pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
+ mb();/*ditto*/
+ spin_unlock_irq(&pm8001_ha->lock);
+ task->task_done(task);
+ spin_lock_irq(&pm8001_ha->lock);
+ return 0;
+ }
+ }
+ }
+
+ ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc,
+ &sata_cmd, outb++);
+
+ /* rotate the outb queue */
+ outb = outb%PM8001_MAX_SPCV_OUTB_NUM;
+ return ret;
+}
+
+/**
+ * pm80xx_chip_phy_start_req - start phy via PHY_START COMMAND
+ * @pm8001_ha: our hba card information.
+ * @num: the inbound queue number
+ * @phy_id: the phy id which we wanted to start up.
+ */
+static int
+pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
+{
+ struct phy_start_req payload;
+ struct inbound_queue_table *circularQ;
+ int ret;
+ u32 tag = 0x01;
+ u32 opcode = OPC_INB_PHYSTART;
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ memset(&payload, 0, sizeof(payload));
+ payload.tag = cpu_to_le32(tag);
+
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("PHY START REQ for phy_id %d\n", phy_id));
+ /*
+ ** [0:7] PHY Identifier
+ ** [8:11] link rate 1.5G, 3G, 6G
+ ** [12:13] link mode 01b SAS mode; 10b SATA mode; 11b Auto mode
+ ** [14] 0b disable spin up hold; 1b enable spin up hold
+ ** [15] ob no change in current PHY analig setup 1b enable using SPAST
+ */
+ payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
+ LINKMODE_AUTO | LINKRATE_15 |
+ LINKRATE_30 | LINKRATE_60 | phy_id);
+ /* SSC Disable and SAS Analog ST configuration */
+ /**
+ payload.ase_sh_lm_slr_phyid =
+ cpu_to_le32(SSC_DISABLE_30 | SAS_ASE | SPINHOLD_DISABLE |
+ LINKMODE_AUTO | LINKRATE_15 | LINKRATE_30 | LINKRATE_60 |
+ phy_id);
+ Have to add "SAS PHY Analog Setup SPASTI 1 Byte" Based on need
+ **/
+
+ payload.sas_identify.dev_type = SAS_END_DEVICE;
+ payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL;
+ memcpy(payload.sas_identify.sas_addr,
+ pm8001_ha->sas_addr, SAS_ADDR_SIZE);
+ payload.sas_identify.phy_id = phy_id;
+ ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload, 0);
+ return ret;
+}
+
+/**
+ * pm8001_chip_phy_stop_req - start phy via PHY_STOP COMMAND
+ * @pm8001_ha: our hba card information.
+ * @num: the inbound queue number
+ * @phy_id: the phy id which we wanted to start up.
+ */
+static int pm80xx_chip_phy_stop_req(struct pm8001_hba_info *pm8001_ha,
+ u8 phy_id)
+{
+ struct phy_stop_req payload;
+ struct inbound_queue_table *circularQ;
+ int ret;
+ u32 tag = 0x01;
+ u32 opcode = OPC_INB_PHYSTOP;
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ memset(&payload, 0, sizeof(payload));
+ payload.tag = cpu_to_le32(tag);
+ payload.phy_id = cpu_to_le32(phy_id);
+ ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload, 0);
+ return ret;
+}
+
+/**
+ * see comments on pm8001_mpi_reg_resp.
+ */
+static int pm80xx_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_dev, u32 flag)
+{
+ struct reg_dev_req payload;
+ u32 opc;
+ u32 stp_sspsmp_sata = 0x4;
+ struct inbound_queue_table *circularQ;
+ u32 linkrate, phy_id;
+ int rc, tag = 0xdeadbeef;
+ struct pm8001_ccb_info *ccb;
+ u8 retryFlag = 0x1;
+ u16 firstBurstSize = 0;
+ u16 ITNT = 2000;
+ struct domain_device *dev = pm8001_dev->sas_device;
+ struct domain_device *parent_dev = dev->parent;
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+
+ memset(&payload, 0, sizeof(payload));
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc)
+ return rc;
+ ccb = &pm8001_ha->ccb_info[tag];
+ ccb->device = pm8001_dev;
+ ccb->ccb_tag = tag;
+ payload.tag = cpu_to_le32(tag);
+
+ if (flag == 1) {
+ stp_sspsmp_sata = 0x02; /*direct attached sata */
+ } else {
+ if (pm8001_dev->dev_type == SAS_SATA_DEV)
+ stp_sspsmp_sata = 0x00; /* stp*/
+ else if (pm8001_dev->dev_type == SAS_END_DEVICE ||
+ pm8001_dev->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ pm8001_dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
+ stp_sspsmp_sata = 0x01; /*ssp or smp*/
+ }
+ if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))
+ phy_id = parent_dev->ex_dev.ex_phy->phy_id;
+ else
+ phy_id = pm8001_dev->attached_phy;
+
+ opc = OPC_INB_REG_DEV;
+
+ linkrate = (pm8001_dev->sas_device->linkrate < dev->port->linkrate) ?
+ pm8001_dev->sas_device->linkrate : dev->port->linkrate;
+
+ payload.phyid_portid =
+ cpu_to_le32(((pm8001_dev->sas_device->port->id) & 0xFF) |
+ ((phy_id & 0xFF) << 8));
+
+ payload.dtype_dlr_mcn_ir_retry = cpu_to_le32((retryFlag & 0x01) |
+ ((linkrate & 0x0F) << 24) |
+ ((stp_sspsmp_sata & 0x03) << 28));
+ payload.firstburstsize_ITNexustimeout =
+ cpu_to_le32(ITNT | (firstBurstSize * 0x10000));
+
+ memcpy(payload.sas_addr, pm8001_dev->sas_device->sas_addr,
+ SAS_ADDR_SIZE);
+
+ rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+
+ return rc;
+}
+
+/**
+ * pm80xx_chip_phy_ctl_req - support the local phy operation
+ * @pm8001_ha: our hba card information.
+ * @num: the inbound queue number
+ * @phy_id: the phy id which we wanted to operate
+ * @phy_op:
+ */
+static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
+ u32 phyId, u32 phy_op)
+{
+ struct local_phy_ctl_req payload;
+ struct inbound_queue_table *circularQ;
+ int ret;
+ u32 opc = OPC_INB_LOCAL_PHY_CONTROL;
+ memset(&payload, 0, sizeof(payload));
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ payload.tag = cpu_to_le32(1);
+ payload.phyop_phyid =
+ cpu_to_le32(((phy_op & 0xFF) << 8) | (phyId & 0xFF));
+ ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+ return ret;
+}
+
+static u32 pm80xx_chip_is_our_interupt(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 value;
+#ifdef PM8001_USE_MSIX
+ return 1;
+#endif
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_ODR);
+ if (value)
+ return 1;
+ return 0;
+
+}
+
+/**
+ * pm8001_chip_isr - PM8001 isr handler.
+ * @pm8001_ha: our hba card information.
+ * @irq: irq number.
+ * @stat: stat.
+ */
+static irqreturn_t
+pm80xx_chip_isr(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+ pm80xx_chip_interrupt_disable(pm8001_ha, vec);
+ process_oq(pm8001_ha, vec);
+ pm80xx_chip_interrupt_enable(pm8001_ha, vec);
+ return IRQ_HANDLED;
+}
+
+const struct pm8001_dispatch pm8001_80xx_dispatch = {
+ .name = "pmc80xx",
+ .chip_init = pm80xx_chip_init,
+ .chip_soft_rst = pm80xx_chip_soft_rst,
+ .chip_rst = pm80xx_hw_chip_rst,
+ .chip_iounmap = pm8001_chip_iounmap,
+ .isr = pm80xx_chip_isr,
+ .is_our_interupt = pm80xx_chip_is_our_interupt,
+ .isr_process_oq = process_oq,
+ .interrupt_enable = pm80xx_chip_interrupt_enable,
+ .interrupt_disable = pm80xx_chip_interrupt_disable,
+ .make_prd = pm8001_chip_make_sg,
+ .smp_req = pm80xx_chip_smp_req,
+ .ssp_io_req = pm80xx_chip_ssp_io_req,
+ .sata_req = pm80xx_chip_sata_req,
+ .phy_start_req = pm80xx_chip_phy_start_req,
+ .phy_stop_req = pm80xx_chip_phy_stop_req,
+ .reg_dev_req = pm80xx_chip_reg_dev_req,
+ .dereg_dev_req = pm8001_chip_dereg_dev_req,
+ .phy_ctl_req = pm80xx_chip_phy_ctl_req,
+ .task_abort = pm8001_chip_abort_task,
+ .ssp_tm_req = pm8001_chip_ssp_tm_req,
+ .get_nvmd_req = pm8001_chip_get_nvmd_req,
+ .set_nvmd_req = pm8001_chip_set_nvmd_req,
+ .fw_flash_update_req = pm8001_chip_fw_flash_update_req,
+ .set_dev_state_req = pm8001_chip_set_dev_state_req,
+};