aboutsummaryrefslogtreecommitdiff
path: root/drivers/spi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/spi-pxa2xx-dma.c2
-rw-r--r--drivers/spi/spi-pxa2xx.c2
-rw-r--r--drivers/spi/spi-s3c64xx.c2
-rw-r--r--drivers/spi/spi-sh-hspi.c2
-rw-r--r--drivers/spi/spi-topcliff-pch.c3
-rw-r--r--drivers/spi/spi-xilinx.c74
6 files changed, 41 insertions, 44 deletions
diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c
index c735c5a008a..6427600b5bb 100644
--- a/drivers/spi/spi-pxa2xx-dma.c
+++ b/drivers/spi/spi-pxa2xx-dma.c
@@ -59,7 +59,7 @@ static int pxa2xx_spi_map_dma_buffer(struct driver_data *drv_data,
int ret;
sg_free_table(sgt);
- ret = sg_alloc_table(sgt, nents, GFP_KERNEL);
+ ret = sg_alloc_table(sgt, nents, GFP_ATOMIC);
if (ret)
return ret;
}
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index f5d84d6f822..48b396fced0 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1075,7 +1075,7 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev))
return NULL;
- pdata = devm_kzalloc(&pdev->dev, sizeof(*ssp), GFP_KERNEL);
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
dev_err(&pdev->dev,
"failed to allocate memory for platform data\n");
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 5000586cb98..71cc3e6ef47 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -444,7 +444,7 @@ static int s3c64xx_spi_prepare_transfer(struct spi_master *spi)
}
ret = pm_runtime_get_sync(&sdd->pdev->dev);
- if (ret != 0) {
+ if (ret < 0) {
dev_err(dev, "Failed to enable device: %d\n", ret);
goto out_tx;
}
diff --git a/drivers/spi/spi-sh-hspi.c b/drivers/spi/spi-sh-hspi.c
index 60cfae51c71..eab593eaaaf 100644
--- a/drivers/spi/spi-sh-hspi.c
+++ b/drivers/spi/spi-sh-hspi.c
@@ -89,7 +89,7 @@ static int hspi_status_check_timeout(struct hspi_priv *hspi, u32 mask, u32 val)
if ((mask & hspi_read(hspi, SPSR)) == val)
return 0;
- msleep(20);
+ udelay(10);
}
dev_err(hspi->dev, "timeout\n");
diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index 35f60bd252d..637d728fbeb 100644
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -1487,7 +1487,7 @@ static int pch_spi_pd_probe(struct platform_device *plat_dev)
return 0;
err_spi_register_master:
- free_irq(board_dat->pdev->irq, board_dat);
+ free_irq(board_dat->pdev->irq, data);
err_request_irq:
pch_spi_free_resources(board_dat, data);
err_spi_get_resources:
@@ -1667,6 +1667,7 @@ static int pch_spi_probe(struct pci_dev *pdev,
pd_dev = platform_device_alloc("pch-spi", i);
if (!pd_dev) {
dev_err(&pdev->dev, "platform_device_alloc failed\n");
+ retval = -ENOMEM;
goto err_platform_device;
}
pd_dev_save->pd_save[i] = pd_dev;
diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index e1d76960742..34d18dcfa0d 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -267,7 +267,6 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
{
struct xilinx_spi *xspi = spi_master_get_devdata(spi->master);
u32 ipif_ier;
- u16 cr;
/* We get here with transmitter inhibited */
@@ -276,7 +275,6 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
xspi->remaining_bytes = t->len;
INIT_COMPLETION(xspi->done);
- xilinx_spi_fill_tx_fifo(xspi);
/* Enable the transmit empty interrupt, which we use to determine
* progress on the transmission.
@@ -285,12 +283,41 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
xspi->write_fn(ipif_ier | XSPI_INTR_TX_EMPTY,
xspi->regs + XIPIF_V123B_IIER_OFFSET);
- /* Start the transfer by not inhibiting the transmitter any longer */
- cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET) &
- ~XSPI_CR_TRANS_INHIBIT;
- xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
+ for (;;) {
+ u16 cr;
+ u8 sr;
+
+ xilinx_spi_fill_tx_fifo(xspi);
+
+ /* Start the transfer by not inhibiting the transmitter any
+ * longer
+ */
+ cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET) &
+ ~XSPI_CR_TRANS_INHIBIT;
+ xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
+
+ wait_for_completion(&xspi->done);
+
+ /* A transmit has just completed. Process received data and
+ * check for more data to transmit. Always inhibit the
+ * transmitter while the Isr refills the transmit register/FIFO,
+ * or make sure it is stopped if we're done.
+ */
+ cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET);
+ xspi->write_fn(cr | XSPI_CR_TRANS_INHIBIT,
+ xspi->regs + XSPI_CR_OFFSET);
+
+ /* Read out all the data from the Rx FIFO */
+ sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
+ while ((sr & XSPI_SR_RX_EMPTY_MASK) == 0) {
+ xspi->rx_fn(xspi);
+ sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
+ }
- wait_for_completion(&xspi->done);
+ /* See if there is more data to send */
+ if (!xspi->remaining_bytes > 0)
+ break;
+ }
/* Disable the transmit empty interrupt */
xspi->write_fn(ipif_ier, xspi->regs + XIPIF_V123B_IIER_OFFSET);
@@ -314,38 +341,7 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id)
xspi->write_fn(ipif_isr, xspi->regs + XIPIF_V123B_IISR_OFFSET);
if (ipif_isr & XSPI_INTR_TX_EMPTY) { /* Transmission completed */
- u16 cr;
- u8 sr;
-
- /* A transmit has just completed. Process received data and
- * check for more data to transmit. Always inhibit the
- * transmitter while the Isr refills the transmit register/FIFO,
- * or make sure it is stopped if we're done.
- */
- cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET);
- xspi->write_fn(cr | XSPI_CR_TRANS_INHIBIT,
- xspi->regs + XSPI_CR_OFFSET);
-
- /* Read out all the data from the Rx FIFO */
- sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
- while ((sr & XSPI_SR_RX_EMPTY_MASK) == 0) {
- xspi->rx_fn(xspi);
- sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
- }
-
- /* See if there is more data to send */
- if (xspi->remaining_bytes > 0) {
- xilinx_spi_fill_tx_fifo(xspi);
- /* Start the transfer by not inhibiting the
- * transmitter any longer
- */
- xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
- } else {
- /* No more data to send.
- * Indicate the transfer is completed.
- */
- complete(&xspi->done);
- }
+ complete(&xspi->done);
}
return IRQ_HANDLED;
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-27 22:53:01 +0000