diff options
Diffstat (limited to 'drivers/staging/android/binder.h')
| -rw-r--r-- | drivers/staging/android/binder.h | 306 |
1 files changed, 1 insertions, 305 deletions
diff --git a/drivers/staging/android/binder.h b/drivers/staging/android/binder.h index dbe81ceca1b..d4101a67171 100644 --- a/drivers/staging/android/binder.h +++ b/drivers/staging/android/binder.h @@ -20,311 +20,7 @@ #ifndef _LINUX_BINDER_H #define _LINUX_BINDER_H -#include <linux/ioctl.h> - -#define B_PACK_CHARS(c1, c2, c3, c4) \ - ((((c1)<<24)) | (((c2)<<16)) | (((c3)<<8)) | (c4)) -#define B_TYPE_LARGE 0x85 - -enum { - BINDER_TYPE_BINDER = B_PACK_CHARS('s', 'b', '*', B_TYPE_LARGE), - BINDER_TYPE_WEAK_BINDER = B_PACK_CHARS('w', 'b', '*', B_TYPE_LARGE), - BINDER_TYPE_HANDLE = B_PACK_CHARS('s', 'h', '*', B_TYPE_LARGE), - BINDER_TYPE_WEAK_HANDLE = B_PACK_CHARS('w', 'h', '*', B_TYPE_LARGE), - BINDER_TYPE_FD = B_PACK_CHARS('f', 'd', '*', B_TYPE_LARGE), -}; - -enum { - FLAT_BINDER_FLAG_PRIORITY_MASK = 0xff, - FLAT_BINDER_FLAG_ACCEPTS_FDS = 0x100, -}; - -/* - * This is the flattened representation of a Binder object for transfer - * between processes. The 'offsets' supplied as part of a binder transaction - * contains offsets into the data where these structures occur. The Binder - * driver takes care of re-writing the structure type and data as it moves - * between processes. - */ -struct flat_binder_object { - /* 8 bytes for large_flat_header. */ - unsigned long type; - unsigned long flags; - - /* 8 bytes of data. */ - union { - void __user *binder; /* local object */ - signed long handle; /* remote object */ - }; - - /* extra data associated with local object */ - void __user *cookie; -}; - -/* - * On 64-bit platforms where user code may run in 32-bits the driver must - * translate the buffer (and local binder) addresses appropriately. - */ - -struct binder_write_read { - signed long write_size; /* bytes to write */ - signed long write_consumed; /* bytes consumed by driver */ - unsigned long write_buffer; - signed long read_size; /* bytes to read */ - signed long read_consumed; /* bytes consumed by driver */ - unsigned long read_buffer; -}; - -/* Use with BINDER_VERSION, driver fills in fields. */ -struct binder_version { - /* driver protocol version -- increment with incompatible change */ - signed long protocol_version; -}; - -/* This is the current protocol version. */ -#define BINDER_CURRENT_PROTOCOL_VERSION 7 - -#define BINDER_WRITE_READ _IOWR('b', 1, struct binder_write_read) -#define BINDER_SET_IDLE_TIMEOUT _IOW('b', 3, __s64) -#define BINDER_SET_MAX_THREADS _IOW('b', 5, size_t) -#define BINDER_SET_IDLE_PRIORITY _IOW('b', 6, __s32) -#define BINDER_SET_CONTEXT_MGR _IOW('b', 7, __s32) -#define BINDER_THREAD_EXIT _IOW('b', 8, __s32) -#define BINDER_VERSION _IOWR('b', 9, struct binder_version) - -/* - * NOTE: Two special error codes you should check for when calling - * in to the driver are: - * - * EINTR -- The operation has been interupted. This should be - * handled by retrying the ioctl() until a different error code - * is returned. - * - * ECONNREFUSED -- The driver is no longer accepting operations - * from your process. That is, the process is being destroyed. - * You should handle this by exiting from your process. Note - * that once this error code is returned, all further calls to - * the driver from any thread will return this same code. - */ - -enum transaction_flags { - TF_ONE_WAY = 0x01, /* this is a one-way call: async, no return */ - TF_ROOT_OBJECT = 0x04, /* contents are the component's root object */ - TF_STATUS_CODE = 0x08, /* contents are a 32-bit status code */ - TF_ACCEPT_FDS = 0x10, /* allow replies with file descriptors */ -}; - -struct binder_transaction_data { - /* The first two are only used for bcTRANSACTION and brTRANSACTION, - * identifying the target and contents of the transaction. - */ - union { - size_t handle; /* target descriptor of command transaction */ - void *ptr; /* target descriptor of return transaction */ - } target; - void *cookie; /* target object cookie */ - unsigned int code; /* transaction command */ - - /* General information about the transaction. */ - unsigned int flags; - pid_t sender_pid; - uid_t sender_euid; - size_t data_size; /* number of bytes of data */ - size_t offsets_size; /* number of bytes of offsets */ - - /* If this transaction is inline, the data immediately - * follows here; otherwise, it ends with a pointer to - * the data buffer. - */ - union { - struct { - /* transaction data */ - const void __user *buffer; - /* offsets from buffer to flat_binder_object structs */ - const void __user *offsets; - } ptr; - uint8_t buf[8]; - } data; -}; - -struct binder_ptr_cookie { - void *ptr; - void *cookie; -}; - -struct binder_pri_desc { - int priority; - int desc; -}; - -struct binder_pri_ptr_cookie { - int priority; - void *ptr; - void *cookie; -}; - -enum binder_driver_return_protocol { - BR_ERROR = _IOR('r', 0, int), - /* - * int: error code - */ - - BR_OK = _IO('r', 1), - /* No parameters! */ - - BR_TRANSACTION = _IOR('r', 2, struct binder_transaction_data), - BR_REPLY = _IOR('r', 3, struct binder_transaction_data), - /* - * binder_transaction_data: the received command. - */ - - BR_ACQUIRE_RESULT = _IOR('r', 4, int), - /* - * not currently supported - * int: 0 if the last bcATTEMPT_ACQUIRE was not successful. - * Else the remote object has acquired a primary reference. - */ - - BR_DEAD_REPLY = _IO('r', 5), - /* - * The target of the last transaction (either a bcTRANSACTION or - * a bcATTEMPT_ACQUIRE) is no longer with us. No parameters. - */ - - BR_TRANSACTION_COMPLETE = _IO('r', 6), - /* - * No parameters... always refers to the last transaction requested - * (including replies). Note that this will be sent even for - * asynchronous transactions. - */ - - BR_INCREFS = _IOR('r', 7, struct binder_ptr_cookie), - BR_ACQUIRE = _IOR('r', 8, struct binder_ptr_cookie), - BR_RELEASE = _IOR('r', 9, struct binder_ptr_cookie), - BR_DECREFS = _IOR('r', 10, struct binder_ptr_cookie), - /* - * void *: ptr to binder - * void *: cookie for binder - */ - - BR_ATTEMPT_ACQUIRE = _IOR('r', 11, struct binder_pri_ptr_cookie), - /* - * not currently supported - * int: priority - * void *: ptr to binder - * void *: cookie for binder - */ - - BR_NOOP = _IO('r', 12), - /* - * No parameters. Do nothing and examine the next command. It exists - * primarily so that we can replace it with a BR_SPAWN_LOOPER command. - */ - - BR_SPAWN_LOOPER = _IO('r', 13), - /* - * No parameters. The driver has determined that a process has no - * threads waiting to service incoming transactions. When a process - * receives this command, it must spawn a new service thread and - * register it via bcENTER_LOOPER. - */ - - BR_FINISHED = _IO('r', 14), - /* - * not currently supported - * stop threadpool thread - */ - - BR_DEAD_BINDER = _IOR('r', 15, void *), - /* - * void *: cookie - */ - BR_CLEAR_DEATH_NOTIFICATION_DONE = _IOR('r', 16, void *), - /* - * void *: cookie - */ - - BR_FAILED_REPLY = _IO('r', 17), - /* - * The the last transaction (either a bcTRANSACTION or - * a bcATTEMPT_ACQUIRE) failed (e.g. out of memory). No parameters. - */ -}; - -enum binder_driver_command_protocol { - BC_TRANSACTION = _IOW('c', 0, struct binder_transaction_data), - BC_REPLY = _IOW('c', 1, struct binder_transaction_data), - /* - * binder_transaction_data: the sent command. - */ - - BC_ACQUIRE_RESULT = _IOW('c', 2, int), - /* - * not currently supported - * int: 0 if the last BR_ATTEMPT_ACQUIRE was not successful. - * Else you have acquired a primary reference on the object. - */ - - BC_FREE_BUFFER = _IOW('c', 3, int), - /* - * void *: ptr to transaction data received on a read - */ - - BC_INCREFS = _IOW('c', 4, int), - BC_ACQUIRE = _IOW('c', 5, int), - BC_RELEASE = _IOW('c', 6, int), - BC_DECREFS = _IOW('c', 7, int), - /* - * int: descriptor - */ - - BC_INCREFS_DONE = _IOW('c', 8, struct binder_ptr_cookie), - BC_ACQUIRE_DONE = _IOW('c', 9, struct binder_ptr_cookie), - /* - * void *: ptr to binder - * void *: cookie for binder - */ - - BC_ATTEMPT_ACQUIRE = _IOW('c', 10, struct binder_pri_desc), - /* - * not currently supported - * int: priority - * int: descriptor - */ - - BC_REGISTER_LOOPER = _IO('c', 11), - /* - * No parameters. - * Register a spawned looper thread with the device. - */ - - BC_ENTER_LOOPER = _IO('c', 12), - BC_EXIT_LOOPER = _IO('c', 13), - /* - * No parameters. - * These two commands are sent as an application-level thread - * enters and exits the binder loop, respectively. They are - * used so the binder can have an accurate count of the number - * of looping threads it has available. - */ - - BC_REQUEST_DEATH_NOTIFICATION = _IOW('c', 14, struct binder_ptr_cookie), - /* - * void *: ptr to binder - * void *: cookie - */ - - BC_CLEAR_DEATH_NOTIFICATION = _IOW('c', 15, struct binder_ptr_cookie), - /* - * void *: ptr to binder - * void *: cookie - */ - - BC_DEAD_BINDER_DONE = _IOW('c', 16, void *), - /* - * void *: cookie - */ -}; +#include "uapi/binder.h" #endif /* _LINUX_BINDER_H */ |