diff options
Diffstat (limited to 'drivers/staging/iio/gyro/adis16260.h')
| -rw-r--r-- | drivers/staging/iio/gyro/adis16260.h | 98 |
1 files changed, 0 insertions, 98 deletions
diff --git a/drivers/staging/iio/gyro/adis16260.h b/drivers/staging/iio/gyro/adis16260.h deleted file mode 100644 index df3c0b7e954..00000000000 --- a/drivers/staging/iio/gyro/adis16260.h +++ /dev/null @@ -1,98 +0,0 @@ -#ifndef SPI_ADIS16260_H_ -#define SPI_ADIS16260_H_ - -#include "adis16260_platform_data.h" -#include <linux/iio/imu/adis.h> - -#define ADIS16260_STARTUP_DELAY 220 /* ms */ - -#define ADIS16260_FLASH_CNT 0x00 /* Flash memory write count */ -#define ADIS16260_SUPPLY_OUT 0x02 /* Power supply measurement */ -#define ADIS16260_GYRO_OUT 0x04 /* X-axis gyroscope output */ -#define ADIS16260_AUX_ADC 0x0A /* analog input channel measurement */ -#define ADIS16260_TEMP_OUT 0x0C /* internal temperature measurement */ -#define ADIS16260_ANGL_OUT 0x0E /* angle displacement */ -#define ADIS16260_GYRO_OFF 0x14 /* Calibration, offset/bias adjustment */ -#define ADIS16260_GYRO_SCALE 0x16 /* Calibration, scale adjustment */ -#define ADIS16260_ALM_MAG1 0x20 /* Alarm 1 magnitude/polarity setting */ -#define ADIS16260_ALM_MAG2 0x22 /* Alarm 2 magnitude/polarity setting */ -#define ADIS16260_ALM_SMPL1 0x24 /* Alarm 1 dynamic rate of change setting */ -#define ADIS16260_ALM_SMPL2 0x26 /* Alarm 2 dynamic rate of change setting */ -#define ADIS16260_ALM_CTRL 0x28 /* Alarm control */ -#define ADIS16260_AUX_DAC 0x30 /* Auxiliary DAC data */ -#define ADIS16260_GPIO_CTRL 0x32 /* Control, digital I/O line */ -#define ADIS16260_MSC_CTRL 0x34 /* Control, data ready, self-test settings */ -#define ADIS16260_SMPL_PRD 0x36 /* Control, internal sample rate */ -#define ADIS16260_SENS_AVG 0x38 /* Control, dynamic range, filtering */ -#define ADIS16260_SLP_CNT 0x3A /* Control, sleep mode initiation */ -#define ADIS16260_DIAG_STAT 0x3C /* Diagnostic, error flags */ -#define ADIS16260_GLOB_CMD 0x3E /* Control, global commands */ -#define ADIS16260_LOT_ID1 0x52 /* Lot Identification Code 1 */ -#define ADIS16260_LOT_ID2 0x54 /* Lot Identification Code 2 */ -#define ADIS16260_PROD_ID 0x56 /* Product identifier; - * convert to decimal = 16,265/16,260 */ -#define ADIS16260_SERIAL_NUM 0x58 /* Serial number */ - -#define ADIS16260_ERROR_ACTIVE (1<<14) -#define ADIS16260_NEW_DATA (1<<15) - -/* MSC_CTRL */ -#define ADIS16260_MSC_CTRL_MEM_TEST (1<<11) -/* Internal self-test enable */ -#define ADIS16260_MSC_CTRL_INT_SELF_TEST (1<<10) -#define ADIS16260_MSC_CTRL_NEG_SELF_TEST (1<<9) -#define ADIS16260_MSC_CTRL_POS_SELF_TEST (1<<8) -#define ADIS16260_MSC_CTRL_DATA_RDY_EN (1<<2) -#define ADIS16260_MSC_CTRL_DATA_RDY_POL_HIGH (1<<1) -#define ADIS16260_MSC_CTRL_DATA_RDY_DIO2 (1<<0) - -/* SMPL_PRD */ -/* Time base (tB): 0 = 1.953 ms, 1 = 60.54 ms */ -#define ADIS16260_SMPL_PRD_TIME_BASE (1<<7) -#define ADIS16260_SMPL_PRD_DIV_MASK 0x7F - -/* SLP_CNT */ -#define ADIS16260_SLP_CNT_POWER_OFF 0x80 - -/* DIAG_STAT */ -#define ADIS16260_DIAG_STAT_ALARM2 (1<<9) -#define ADIS16260_DIAG_STAT_ALARM1 (1<<8) -#define ADIS16260_DIAG_STAT_FLASH_CHK_BIT 6 -#define ADIS16260_DIAG_STAT_SELF_TEST_BIT 5 -#define ADIS16260_DIAG_STAT_OVERFLOW_BIT 4 -#define ADIS16260_DIAG_STAT_SPI_FAIL_BIT 3 -#define ADIS16260_DIAG_STAT_FLASH_UPT_BIT 2 -#define ADIS16260_DIAG_STAT_POWER_HIGH_BIT 1 -#define ADIS16260_DIAG_STAT_POWER_LOW_BIT 0 - -/* GLOB_CMD */ -#define ADIS16260_GLOB_CMD_SW_RESET (1<<7) -#define ADIS16260_GLOB_CMD_FLASH_UPD (1<<3) -#define ADIS16260_GLOB_CMD_DAC_LATCH (1<<2) -#define ADIS16260_GLOB_CMD_FAC_CALIB (1<<1) -#define ADIS16260_GLOB_CMD_AUTO_NULL (1<<0) - -#define ADIS16260_SPI_SLOW (u32)(300 * 1000) -#define ADIS16260_SPI_BURST (u32)(1000 * 1000) -#define ADIS16260_SPI_FAST (u32)(2000 * 1000) - -/** - * struct adis16260_state - device instance specific data - * @negate: negate the scale parameter - **/ -struct adis16260_state { - unsigned negate:1; - struct adis adis; -}; - -/* At the moment triggers are only used for ring buffer - * filling. This may change! - */ - -#define ADIS16260_SCAN_GYRO 0 -#define ADIS16260_SCAN_SUPPLY 1 -#define ADIS16260_SCAN_AUX_ADC 2 -#define ADIS16260_SCAN_TEMP 3 -#define ADIS16260_SCAN_ANGL 4 - -#endif /* SPI_ADIS16260_H_ */ |