diff options
Diffstat (limited to 'drivers/staging/omapdrm')
21 files changed, 6411 insertions, 0 deletions
diff --git a/drivers/staging/omapdrm/Kconfig b/drivers/staging/omapdrm/Kconfig new file mode 100644 index 00000000000..81a7cba4a0c --- /dev/null +++ b/drivers/staging/omapdrm/Kconfig @@ -0,0 +1,25 @@ + +config DRM_OMAP + tristate "OMAP DRM" + depends on DRM && !CONFIG_FB_OMAP2 + depends on ARCH_OMAP2PLUS + select DRM_KMS_HELPER + select OMAP2_DSS + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS + default n + help + DRM display driver for OMAP2/3/4 based boards. + +config DRM_OMAP_NUM_CRTCS + int "Number of CRTCs" + range 1 10 + default 1 if ARCH_OMAP2 || ARCH_OMAP3 + default 2 if ARCH_OMAP4 + depends on DRM_OMAP + help + Select the number of video overlays which can be used as framebuffers. + The remaining overlays are reserved for video. + diff --git a/drivers/staging/omapdrm/Makefile b/drivers/staging/omapdrm/Makefile new file mode 100644 index 00000000000..592cf69020c --- /dev/null +++ b/drivers/staging/omapdrm/Makefile @@ -0,0 +1,21 @@ +# +# Makefile for the drm device driver. This driver provides support for the +# Direct Rendering Infrastructure (DRI) +# + +ccflags-y := -Iinclude/drm -Werror +omapdrm-y := omap_drv.o \ + omap_debugfs.o \ + omap_crtc.o \ + omap_encoder.o \ + omap_connector.o \ + omap_fb.o \ + omap_fbdev.o \ + omap_gem.o \ + omap_dmm_tiler.o \ + tcm-sita.o + +# temporary: +omapdrm-y += omap_gem_helpers.o + +obj-$(CONFIG_DRM_OMAP) += omapdrm.o diff --git a/drivers/staging/omapdrm/TODO b/drivers/staging/omapdrm/TODO new file mode 100644 index 00000000000..55b18377ac4 --- /dev/null +++ b/drivers/staging/omapdrm/TODO @@ -0,0 +1,38 @@ +TODO +. check error handling/cleanup paths +. add drm_plane / overlay support +. add video decode/encode support (via syslink3 + codec-engine) +. still some rough edges with flipping.. event back to userspace should + really come after VSYNC interrupt +. where should we do eviction (detatch_pages())? We aren't necessarily + accessing the pages via a GART, so maybe we need some other threshold + to put a cap on the # of pages that can be pin'd. (It is mostly only + of interest in case you have a swap partition/file.. which a lot of + these devices do not.. but it doesn't hurt for the driver to do the + right thing anyways.) + . Use mm_shrinker to trigger unpinning pages. Need to figure out how + to handle next issue first (I think?) + . Note TTM already has some mm_shrinker stuff.. maybe an argument to + move to TTM? Or maybe something that could be factored out in common? +. GEM/shmem backed pages can have existing mappings (kernel linear map, + etc..), which isn't really ideal. +. Revisit GEM sync object infrastructure.. TTM has some framework for this + already. Possibly this could be refactored out and made more common? + There should be some way to do this with less wheel-reinvention. +. Review DSS vs KMS mismatches. The omap_dss_device is sort of part encoder, + part connector. Which results in a bit of duct tape to fwd calls from + encoder to connector. Possibly this could be done a bit better. +. Solve PM sequencing on resume. DMM/TILER must be reloaded before any + access is made from any component in the system. Which means on suspend + CRTC's should be disabled, and on resume the LUT should be reprogrammed + before CRTC's are re-enabled, to prevent DSS from trying to DMA from a + buffer mapped in DMM/TILER before LUT is reloaded. +. Add debugfs information for DMM/TILER + +Userspace: +. git://github.com/robclark/xf86-video-omap.git + +Currently tested on +. OMAP3530 beagleboard +. OMAP4430 pandaboard +. OMAP4460 pandaboard diff --git a/drivers/staging/omapdrm/omap_connector.c b/drivers/staging/omapdrm/omap_connector.c new file mode 100644 index 00000000000..5e2856c0e0b --- /dev/null +++ b/drivers/staging/omapdrm/omap_connector.c @@ -0,0 +1,371 @@ +/* + * drivers/staging/omapdrm/omap_connector.c + * + * Copyright (C) 2011 Texas Instruments + * Author: Rob Clark <rob@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "omap_drv.h" + +#include "drm_crtc.h" +#include "drm_crtc_helper.h" + +/* + * connector funcs + */ + +#define to_omap_connector(x) container_of(x, struct omap_connector, base) + +struct omap_connector { + struct drm_connector base; + struct omap_dss_device *dssdev; +}; + +static inline void copy_timings_omap_to_drm(struct drm_display_mode *mode, + struct omap_video_timings *timings) +{ + mode->clock = timings->pixel_clock; + + mode->hdisplay = timings->x_res; + mode->hsync_start = mode->hdisplay + timings->hfp; + mode->hsync_end = mode->hsync_start + timings->hsw; + mode->htotal = mode->hsync_end + timings->hbp; + + mode->vdisplay = timings->y_res; + mode->vsync_start = mode->vdisplay + timings->vfp; + mode->vsync_end = mode->vsync_start + timings->vsw; + mode->vtotal = mode->vsync_end + timings->vbp; + + /* note: whether or not it is interlaced, +/- h/vsync, etc, + * which should be set in the mode flags, is not exposed in + * the omap_video_timings struct.. but hdmi driver tracks + * those separately so all we have to have to set the mode + * is the way to recover these timings values, and the + * omap_dss_driver would do the rest. + */ +} + +static inline void copy_timings_drm_to_omap(struct omap_video_timings *timings, + struct drm_display_mode *mode) +{ + timings->pixel_clock = mode->clock; + + timings->x_res = mode->hdisplay; + timings->hfp = mode->hsync_start - mode->hdisplay; + timings->hsw = mode->hsync_end - mode->hsync_start; + timings->hbp = mode->htotal - mode->hsync_end; + + timings->y_res = mode->vdisplay; + timings->vfp = mode->vsync_start - mode->vdisplay; + timings->vsw = mode->vsync_end - mode->vsync_start; + timings->vbp = mode->vtotal - mode->vsync_end; +} + +static void omap_connector_dpms(struct drm_connector *connector, int mode) +{ + struct omap_connector *omap_connector = to_omap_connector(connector); + struct omap_dss_device *dssdev = omap_connector->dssdev; + int old_dpms; + + DBG("%s: %d", dssdev->name, mode); + + old_dpms = connector->dpms; + + /* from off to on, do from crtc to connector */ + if (mode < old_dpms) + drm_helper_connector_dpms(connector, mode); + + if (mode == DRM_MODE_DPMS_ON) { + /* store resume info for suspended displays */ + switch (dssdev->state) { + case OMAP_DSS_DISPLAY_SUSPENDED: + dssdev->activate_after_resume = true; + break; + case OMAP_DSS_DISPLAY_DISABLED: { + int ret = dssdev->driver->enable(dssdev); + if (ret) { + DBG("%s: failed to enable: %d", + dssdev->name, ret); + dssdev->driver->disable(dssdev); + } + break; + } + default: + break; + } + } else { + /* TODO */ + } + + /* from on to off, do from connector to crtc */ + if (mode > old_dpms) + drm_helper_connector_dpms(connector, mode); +} + +enum drm_connector_status omap_connector_detect( + struct drm_connector *connector, bool force) +{ + struct omap_connector *omap_connector = to_omap_connector(connector); + struct omap_dss_device *dssdev = omap_connector->dssdev; + struct omap_dss_driver *dssdrv = dssdev->driver; + enum drm_connector_status ret; + + if (dssdrv->detect) { + if (dssdrv->detect(dssdev)) { + ret = connector_status_connected; + } else { + ret = connector_status_disconnected; + } + } else { + ret = connector_status_unknown; + } + + VERB("%s: %d (force=%d)", omap_connector->dssdev->name, ret, force); + + return ret; +} + +static void omap_connector_destroy(struct drm_connector *connector) +{ + struct omap_connector *omap_connector = to_omap_connector(connector); + struct omap_dss_device *dssdev = omap_connector->dssdev; + + dssdev->driver->disable(dssdev); + + DBG("%s", omap_connector->dssdev->name); + drm_sysfs_connector_remove(connector); + drm_connector_cleanup(connector); + kfree(omap_connector); + + omap_dss_put_device(dssdev); +} + +#define MAX_EDID 512 + +static int omap_connector_get_modes(struct drm_connector *connector) +{ + struct omap_connector *omap_connector = to_omap_connector(connector); + struct omap_dss_device *dssdev = omap_connector->dssdev; + struct omap_dss_driver *dssdrv = dssdev->driver; + struct drm_device *dev = connector->dev; + int n = 0; + + DBG("%s", omap_connector->dssdev->name); + + /* if display exposes EDID, then we parse that in the normal way to + * build table of supported modes.. otherwise (ie. fixed resolution + * LCD panels) we just return a single mode corresponding to the + * currently configured timings: + */ + if (dssdrv->read_edid) { + void *edid = kzalloc(MAX_EDID, GFP_KERNEL); + + if ((dssdrv->read_edid(dssdev, edid, MAX_EDID) > 0) && + drm_edid_is_valid(edid)) { + drm_mode_connector_update_edid_property( + connector, edid); + n = drm_add_edid_modes(connector, edid); + kfree(connector->display_info.raw_edid); + connector->display_info.raw_edid = edid; + } else { + drm_mode_connector_update_edid_property( + connector, NULL); + connector->display_info.raw_edid = NULL; + kfree(edid); + } + } else { + struct drm_display_mode *mode = drm_mode_create(dev); + struct omap_video_timings timings; + + dssdrv->get_timings(dssdev, &timings); + + copy_timings_omap_to_drm(mode, &timings); + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + drm_mode_set_name(mode); + drm_mode_probed_add(connector, mode); + + n = 1; + } + + return n; +} + +static int omap_connector_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct omap_connector *omap_connector = to_omap_connector(connector); + struct omap_dss_device *dssdev = omap_connector->dssdev; + struct omap_dss_driver *dssdrv = dssdev->driver; + struct omap_video_timings timings = {0}; + struct drm_device *dev = connector->dev; + struct drm_display_mode *new_mode; + int ret = MODE_BAD; + + copy_timings_drm_to_omap(&timings, mode); + mode->vrefresh = drm_mode_vrefresh(mode); + + if (!dssdrv->check_timings(dssdev, &timings)) { + /* check if vrefresh is still valid */ + new_mode = drm_mode_duplicate(dev, mode); + new_mode->clock = timings.pixel_clock; + new_mode->vrefresh = 0; + if (mode->vrefresh == drm_mode_vrefresh(new_mode)) + ret = MODE_OK; + drm_mode_destroy(dev, new_mode); + } + + DBG("connector: mode %s: " + "%d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x", + (ret == MODE_OK) ? "valid" : "invalid", + mode->base.id, mode->name, mode->vrefresh, mode->clock, + mode->hdisplay, mode->hsync_start, + mode->hsync_end, mode->htotal, + mode->vdisplay, mode->vsync_start, + mode->vsync_end, mode->vtotal, mode->type, mode->flags); + + return ret; +} + +struct drm_encoder *omap_connector_attached_encoder( + struct drm_connector *connector) +{ + int i; + struct omap_connector *omap_connector = to_omap_connector(connector); + + for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) { + struct drm_mode_object *obj; + + if (connector->encoder_ids[i] == 0) + break; + + obj = drm_mode_object_find(connector->dev, + connector->encoder_ids[i], + DRM_MODE_OBJECT_ENCODER); + + if (obj) { + struct drm_encoder *encoder = obj_to_encoder(obj); + struct omap_overlay_manager *mgr = + omap_encoder_get_manager(encoder); + DBG("%s: found %s", omap_connector->dssdev->name, + mgr->name); + return encoder; + } + } + + DBG("%s: no encoder", omap_connector->dssdev->name); + + return NULL; +} + +static const struct drm_connector_funcs omap_connector_funcs = { + .dpms = omap_connector_dpms, + .detect = omap_connector_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = omap_connector_destroy, +}; + +static const struct drm_connector_helper_funcs omap_connector_helper_funcs = { + .get_modes = omap_connector_get_modes, + .mode_valid = omap_connector_mode_valid, + .best_encoder = omap_connector_attached_encoder, +}; + +/* called from encoder when mode is set, to propagate settings to the dssdev */ +void omap_connector_mode_set(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct drm_device *dev = connector->dev; + struct omap_connector *omap_connector = to_omap_connector(connector); + struct omap_dss_device *dssdev = omap_connector->dssdev; + struct omap_dss_driver *dssdrv = dssdev->driver; + struct omap_video_timings timings; + + copy_timings_drm_to_omap(&timings, mode); + + DBG("%s: set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x", + omap_connector->dssdev->name, + mode->base.id, mode->name, mode->vrefresh, mode->clock, + mode->hdisplay, mode->hsync_start, + mode->hsync_end, mode->htotal, + mode->vdisplay, mode->vsync_start, + mode->vsync_end, mode->vtotal, mode->type, mode->flags); + + if (dssdrv->check_timings(dssdev, &timings)) { + dev_err(dev->dev, "could not set timings\n"); + return; + } + + dssdrv->set_timings(dssdev, &timings); +} + +/* flush an area of the framebuffer (in case of manual update display that + * is not automatically flushed) + */ +void omap_connector_flush(struct drm_connector *connector, + int x, int y, int w, int h) +{ + struct omap_connector *omap_connector = to_omap_connector(connector); + + /* TODO: enable when supported in dss */ + VERB("%s: %d,%d, %dx%d", omap_connector->dssdev->name, x, y, w, h); +} + +/* initialize connector */ +struct drm_connector *omap_connector_init(struct drm_device *dev, + int connector_type, struct omap_dss_device *dssdev) +{ + struct drm_connector *connector = NULL; + struct omap_connector *omap_connector; + + DBG("%s", dssdev->name); + + omap_dss_get_device(dssdev); + + omap_connector = kzalloc(sizeof(struct omap_connector), GFP_KERNEL); + if (!omap_connector) { + dev_err(dev->dev, "could not allocate connector\n"); + goto fail; + } + + omap_connector->dssdev = dssdev; + connector = &omap_connector->base; + + drm_connector_init(dev, connector, &omap_connector_funcs, + connector_type); + drm_connector_helper_add(connector, &omap_connector_helper_funcs); + +#if 0 /* enable when dss2 supports hotplug */ + if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_HPD) + connector->polled = 0; + else +#endif + connector->polled = DRM_CONNECTOR_POLL_CONNECT | + DRM_CONNECTOR_POLL_DISCONNECT; + + connector->interlace_allowed = 1; + connector->doublescan_allowed = 0; + + drm_sysfs_connector_add(connector); + + return connector; + +fail: + if (connector) { + omap_connector_destroy(connector); + } + + return NULL; +} diff --git a/drivers/staging/omapdrm/omap_crtc.c b/drivers/staging/omapdrm/omap_crtc.c new file mode 100644 index 00000000000..cffdf5e1239 --- /dev/null +++ b/drivers/staging/omapdrm/omap_crtc.c @@ -0,0 +1,326 @@ +/* + * drivers/staging/omapdrm/omap_crtc.c + * + * Copyright (C) 2011 Texas Instruments + * Author: Rob Clark <rob@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "omap_drv.h" + +#include "drm_mode.h" +#include "drm_crtc.h" +#include "drm_crtc_helper.h" + +#define to_omap_crtc(x) container_of(x, struct omap_crtc, base) + +struct omap_crtc { + struct drm_crtc base; + struct omap_overlay *ovl; + struct omap_overlay_info info; + int id; + + /* if there is a pending flip, this will be non-null: */ + struct drm_pending_vblank_event *event; +}; + +/* push changes down to dss2 */ +static int commit(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + struct omap_overlay *ovl = omap_crtc->ovl; + struct omap_overlay_info *info = &omap_crtc->info; + int ret; + + DBG("%s", omap_crtc->ovl->name); + DBG("%dx%d -> %dx%d (%d)", info->width, info->height, info->out_width, + info->out_height, info->screen_width); + DBG("%d,%d %08x", info->pos_x, info->pos_y, info->paddr); + + /* NOTE: do we want to do this at all here, or just wait + * for dpms(ON) since other CRTC's may not have their mode + * set yet, so fb dimensions may still change.. + */ + ret = ovl->set_overlay_info(ovl, info); + if (ret) { + dev_err(dev->dev, "could not set overlay info\n"); + return ret; + } + + /* our encoder doesn't necessarily get a commit() after this, in + * particular in the dpms() and mode_set_base() cases, so force the + * manager to update: + * + * could this be in the encoder somehow? + */ + if (ovl->manager) { + ret = ovl->manager->apply(ovl->manager); + if (ret) { + dev_err(dev->dev, "could not apply settings\n"); + return ret; + } + } + + if (info->enabled) { + omap_framebuffer_flush(crtc->fb, crtc->x, crtc->y, + crtc->fb->width, crtc->fb->height); + } + + return 0; +} + +/* update parameters that are dependent on the framebuffer dimensions and + * position within the fb that this crtc scans out from. This is called + * when framebuffer dimensions or x,y base may have changed, either due + * to our mode, or a change in another crtc that is scanning out of the + * same fb. + */ +static void update_scanout(struct drm_crtc *crtc) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + dma_addr_t paddr; + unsigned int screen_width; + + omap_framebuffer_get_buffer(crtc->fb, crtc->x, crtc->y, + NULL, &paddr, &screen_width); + + DBG("%s: %d,%d: %08x (%d)", omap_crtc->ovl->name, + crtc->x, crtc->y, (u32)paddr, screen_width); + + omap_crtc->info.paddr = paddr; + omap_crtc->info.screen_width = screen_width; +} + +static void omap_crtc_gamma_set(struct drm_crtc *crtc, + u16 *red, u16 *green, u16 *blue, uint32_t start, uint32_t size) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + DBG("%s", omap_crtc->ovl->name); +} + +static void omap_crtc_destroy(struct drm_crtc *crtc) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + DBG("%s", omap_crtc->ovl->name); + drm_crtc_cleanup(crtc); + kfree(omap_crtc); +} + +static void omap_crtc_dpms(struct drm_crtc *crtc, int mode) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + + DBG("%s: %d", omap_crtc->ovl->name, mode); + + if (mode == DRM_MODE_DPMS_ON) { + update_scanout(crtc); + omap_crtc->info.enabled = true; + } else { + omap_crtc->info.enabled = false; + } + + WARN_ON(commit(crtc)); +} + +static bool omap_crtc_mode_fixup(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + DBG("%s", omap_crtc->ovl->name); + return true; +} + +static int omap_crtc_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y, + struct drm_framebuffer *old_fb) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + + DBG("%s: %d,%d: %dx%d", omap_crtc->ovl->name, x, y, + mode->hdisplay, mode->vdisplay); + + /* just use adjusted mode */ + mode = adjusted_mode; + + omap_crtc->info.width = mode->hdisplay; + omap_crtc->info.height = mode->vdisplay; + omap_crtc->info.out_width = mode->hdisplay; + omap_crtc->info.out_height = mode->vdisplay; + omap_crtc->info.color_mode = OMAP_DSS_COLOR_RGB24U; + omap_crtc->info.rotation_type = OMAP_DSS_ROT_DMA; + omap_crtc->info.rotation = OMAP_DSS_ROT_0; + omap_crtc->info.global_alpha = 0xff; + omap_crtc->info.mirror = 0; + omap_crtc->info.mirror = 0; + omap_crtc->info.pos_x = 0; + omap_crtc->info.pos_y = 0; +#if 0 /* re-enable when these are available in DSS2 driver */ + omap_crtc->info.zorder = 3; /* GUI in the front, video behind */ + omap_crtc->info.min_x_decim = 1; + omap_crtc->info.max_x_decim = 1; + omap_crtc->info.min_y_decim = 1; + omap_crtc->info.max_y_decim = 1; +#endif + + update_scanout(crtc); + + return 0; +} + +static void omap_crtc_prepare(struct drm_crtc *crtc) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + struct omap_overlay *ovl = omap_crtc->ovl; + + DBG("%s", omap_crtc->ovl->name); + + ovl->get_overlay_info(ovl, &omap_crtc->info); + + omap_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); +} + +static void omap_crtc_commit(struct drm_crtc *crtc) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + DBG("%s", omap_crtc->ovl->name); + omap_crtc_dpms(crtc, DRM_MODE_DPMS_ON); +} + +static int omap_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, + struct drm_framebuffer *old_fb) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + + DBG("%s %d,%d: fb=%p", omap_crtc->ovl->name, x, y, old_fb); + + update_scanout(crtc); + + return commit(crtc); +} + +static void omap_crtc_load_lut(struct drm_crtc *crtc) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + DBG("%s", omap_crtc->ovl->name); +} + +static void page_flip_cb(void *arg) +{ + struct drm_crtc *crtc = arg; + struct drm_device *dev = crtc->dev; + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + struct drm_pending_vblank_event *event = omap_crtc->event; + struct timeval now; + unsigned long flags; + + WARN_ON(!event); + + omap_crtc->event = NULL; + + update_scanout(crtc); + WARN_ON(commit(crtc)); + + /* wakeup userspace */ + /* TODO: this should happen *after* flip in vsync IRQ handler */ + if (event) { + spin_lock_irqsave(&dev->event_lock, flags); + event->event.sequence = drm_vblank_count_and_time( + dev, omap_crtc->id, &now); + event->event.tv_sec = now.tv_sec; + event->event.tv_usec = now.tv_usec; + list_add_tail(&event->base.link, + &event->base.file_priv->event_list); + wake_up_interruptible(&event->base.file_priv->event_wait); + spin_unlock_irqrestore(&dev->event_lock, flags); + } +} + +static int omap_crtc_page_flip_locked(struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_pending_vblank_event *event) +{ + struct drm_device *dev = crtc->dev; + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + + DBG("%d -> %d", crtc->fb ? crtc->fb->base.id : -1, fb->base.id); + + if (omap_crtc->event) { + dev_err(dev->dev, "already a pending flip\n"); + return -EINVAL; + } + + crtc->fb = fb; + omap_crtc->event = event; + + omap_gem_op_async(omap_framebuffer_bo(fb), OMAP_GEM_READ, + page_flip_cb, crtc); + + return 0; +} + +static const struct drm_crtc_funcs omap_crtc_funcs = { + .gamma_set = omap_crtc_gamma_set, + .set_config = drm_crtc_helper_set_config, + .destroy = omap_crtc_destroy, + .page_flip = omap_crtc_page_flip_locked, +}; + +static const struct drm_crtc_helper_funcs omap_crtc_helper_funcs = { + .dpms = omap_crtc_dpms, + .mode_fixup = omap_crtc_mode_fixup, + .mode_set = omap_crtc_mode_set, + .prepare = omap_crtc_prepare, + .commit = omap_crtc_commit, + .mode_set_base = omap_crtc_mode_set_base, + .load_lut = omap_crtc_load_lut, +}; + +struct omap_overlay *omap_crtc_get_overlay(struct drm_crtc *crtc) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + return omap_crtc->ovl; +} + +/* initialize crtc */ +struct drm_crtc *omap_crtc_init(struct drm_device *dev, + struct omap_overlay *ovl, int id) +{ + struct drm_crtc *crtc = NULL; + struct omap_crtc *omap_crtc = kzalloc(sizeof(*omap_crtc), GFP_KERNEL); + + DBG("%s", ovl->name); + + if (!omap_crtc) { + dev_err(dev->dev, "could not allocate CRTC\n"); + goto fail; + } + + omap_crtc->ovl = ovl; + omap_crtc->id = id; + crtc = &omap_crtc->base; + drm_crtc_init(dev, crtc, &omap_crtc_funcs); + drm_crtc_helper_add(crtc, &omap_crtc_helper_funcs); + + return crtc; + +fail: + if (crtc) { + omap_crtc_destroy(crtc); + } + return NULL; +} diff --git a/drivers/staging/omapdrm/omap_debugfs.c b/drivers/staging/omapdrm/omap_debugfs.c new file mode 100644 index 00000000000..da920dfdc59 --- /dev/null +++ b/drivers/staging/omapdrm/omap_debugfs.c @@ -0,0 +1,42 @@ +/* + * drivers/staging/omapdrm/omap_debugfs.c + * + * Copyright (C) 2011 Texas Instruments + * Author: Rob Clark <rob.clark@linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "omap_drv.h" +#include "omap_dmm_tiler.h" + +#ifdef CONFIG_DEBUG_FS + +static struct drm_info_list omap_debugfs_list[] = { + {"tiler_map", tiler_map_show, 0}, +}; + +int omap_debugfs_init(struct drm_minor *minor) +{ + return drm_debugfs_create_files(omap_debugfs_list, + ARRAY_SIZE(omap_debugfs_list), + minor->debugfs_root, minor); +} + +void omap_debugfs_cleanup(struct drm_minor *minor) +{ + drm_debugfs_remove_files(omap_debugfs_list, + ARRAY_SIZE(omap_debugfs_list), minor); +} + +#endif diff --git a/drivers/staging/omapdrm/omap_dmm_priv.h b/drivers/staging/omapdrm/omap_dmm_priv.h new file mode 100644 index 00000000000..2f529ab4b7c --- /dev/null +++ b/drivers/staging/omapdrm/omap_dmm_priv.h @@ -0,0 +1,187 @@ +/* + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Author: Rob Clark <rob@ti.com> + * Andy Gross <andy.gross@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef OMAP_DMM_PRIV_H +#define OMAP_DMM_PRIV_H + +#define DMM_REVISION 0x000 +#define DMM_HWINFO 0x004 +#define DMM_LISA_HWINFO 0x008 +#define DMM_DMM_SYSCONFIG 0x010 +#define DMM_LISA_LOCK 0x01C +#define DMM_LISA_MAP__0 0x040 +#define DMM_LISA_MAP__1 0x044 +#define DMM_TILER_HWINFO 0x208 +#define DMM_TILER_OR__0 0x220 +#define DMM_TILER_OR__1 0x224 +#define DMM_PAT_HWINFO 0x408 +#define DMM_PAT_GEOMETRY 0x40C +#define DMM_PAT_CONFIG 0x410 +#define DMM_PAT_VIEW__0 0x420 +#define DMM_PAT_VIEW__1 0x424 +#define DMM_PAT_VIEW_MAP__0 0x440 +#define DMM_PAT_VIEW_MAP_BASE 0x460 +#define DMM_PAT_IRQ_EOI 0x478 +#define DMM_PAT_IRQSTATUS_RAW 0x480 +#define DMM_PAT_IRQSTATUS 0x490 +#define DMM_PAT_IRQENABLE_SET 0x4A0 +#define DMM_PAT_IRQENABLE_CLR 0x4B0 +#define DMM_PAT_STATUS__0 0x4C0 +#define DMM_PAT_STATUS__1 0x4C4 +#define DMM_PAT_STATUS__2 0x4C8 +#define DMM_PAT_STATUS__3 0x4CC +#define DMM_PAT_DESCR__0 0x500 +#define DMM_PAT_DESCR__1 0x510 +#define DMM_PAT_DESCR__2 0x520 +#define DMM_PAT_DESCR__3 0x530 +#define DMM_PEG_HWINFO 0x608 +#define DMM_PEG_PRIO 0x620 +#define DMM_PEG_PRIO_PAT 0x640 + +#define DMM_IRQSTAT_DST (1<<0) +#define DMM_IRQSTAT_LST (1<<1) +#define DMM_IRQSTAT_ERR_INV_DSC (1<<2) +#define DMM_IRQSTAT_ERR_INV_DATA (1<<3) +#define DMM_IRQSTAT_ERR_UPD_AREA (1<<4) +#define DMM_IRQSTAT_ERR_UPD_CTRL (1<<5) +#define DMM_IRQSTAT_ERR_UPD_DATA (1<<6) +#define DMM_IRQSTAT_ERR_LUT_MISS (1<<7) + +#define DMM_IRQSTAT_ERR_MASK (DMM_IRQ_STAT_ERR_INV_DSC | \ + DMM_IRQ_STAT_ERR_INV_DATA | \ + DMM_IRQ_STAT_ERR_UPD_AREA | \ + DMM_IRQ_STAT_ERR_UPD_CTRL | \ + DMM_IRQ_STAT_ERR_UPD_DATA | \ + DMM_IRQ_STAT_ERR_LUT_MISS) + +#define DMM_PATSTATUS_READY (1<<0) +#define DMM_PATSTATUS_VALID (1<<1) +#define DMM_PATSTATUS_RUN (1<<2) +#define DMM_PATSTATUS_DONE (1<<3) +#define DMM_PATSTATUS_LINKED (1<<4) +#define DMM_PATSTATUS_BYPASSED (1<<7) +#define DMM_PATSTATUS_ERR_INV_DESCR (1<<10) +#define DMM_PATSTATUS_ERR_INV_DATA (1<<11) +#define DMM_PATSTATUS_ERR_UPD_AREA (1<<12) +#define DMM_PATSTATUS_ERR_UPD_CTRL (1<<13) +#define DMM_PATSTATUS_ERR_UPD_DATA (1<<14) +#define DMM_PATSTATUS_ERR_ACCESS (1<<15) + +/* note: don't treat DMM_PATSTATUS_ERR_ACCESS as an error */ +#define DMM_PATSTATUS_ERR (DMM_PATSTATUS_ERR_INV_DESCR | \ + DMM_PATSTATUS_ERR_INV_DATA | \ + DMM_PATSTATUS_ERR_UPD_AREA | \ + DMM_PATSTATUS_ERR_UPD_CTRL | \ + DMM_PATSTATUS_ERR_UPD_DATA) + + + +enum { + PAT_STATUS, + PAT_DESCR +}; + +struct pat_ctrl { + u32 start:4; + u32 dir:4; + u32 lut_id:8; + u32 sync:12; + u32 ini:4; +}; + +struct pat { + uint32_t next_pa; + struct pat_area area; + struct pat_ctrl ctrl; + uint32_t data_pa; +}; + +#define DMM_FIXED_RETRY_COUNT 1000 + +/* create refill buffer big enough to refill all slots, plus 3 descriptors.. + * 3 descriptors is probably the worst-case for # of 2d-slices in a 1d area, + * but I guess you don't hit that worst case at the same time as full area + * refill + */ +#define DESCR_SIZE 128 +#define REFILL_BUFFER_SIZE ((4 * 128 * 256) + (3 * DESCR_SIZE)) + +struct dmm; + +struct dmm_txn { + void *engine_handle; + struct tcm *tcm; + + uint8_t *current_va; + dma_addr_t current_pa; + + struct pat *last_pat; +}; + +struct refill_engine { + int id; + struct dmm *dmm; + struct tcm *tcm; + + uint8_t *refill_va; + dma_addr_t refill_pa; + + /* only one trans per engine for now */ + struct dmm_txn txn; + + /* offset to lut associated with container */ + u32 *lut_offset; + + wait_queue_head_t wait_for_refill; + + struct list_head idle_node; +}; + +struct dmm { + struct device *dev; + void __iomem *base; + int irq; + + struct page *dummy_page; + dma_addr_t dummy_pa; + + void *refill_va; + dma_addr_t refill_pa; + + /* refill engines */ + struct semaphore engine_sem; + struct list_head idle_head; + struct refill_engine *engines; + int num_engines; + + /* container information */ + int container_width; + int container_height; + int lut_width; + int lut_height; + int num_lut; + + /* array of LUT - TCM containers */ + struct tcm **tcm; + + /* LUT table storage */ + u32 *lut; + + /* allocation list and lock */ + struct list_head alloc_head; + spinlock_t list_lock; +}; + +#endif diff --git a/drivers/staging/omapdrm/omap_dmm_tiler.c b/drivers/staging/omapdrm/omap_dmm_tiler.c new file mode 100644 index 00000000000..852d9440f72 --- /dev/null +++ b/drivers/staging/omapdrm/omap_dmm_tiler.c @@ -0,0 +1,830 @@ +/* + * DMM IOMMU driver support functions for TI OMAP processors. + * + * Author: Rob Clark <rob@ti.com> + * Andy Gross <andy.gross@ti.com> + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> /* platform_device() */ +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/wait.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> +#include <linux/delay.h> +#include <linux/mm.h> +#include <linux/time.h> +#include <linux/list.h> +#include <linux/semaphore.h> + +#include "omap_dmm_tiler.h" +#include "omap_dmm_priv.h" + +/* mappings for associating views to luts */ +static struct tcm *containers[TILFMT_NFORMATS]; +static struct dmm *omap_dmm; + +/* Geometry table */ +#define GEOM(xshift, yshift, bytes_per_pixel) { \ + .x_shft = (xshift), \ + .y_shft = (yshift), \ + .cpp = (bytes_per_pixel), \ + .slot_w = 1 << (SLOT_WIDTH_BITS - (xshift)), \ + .slot_h = 1 << (SLOT_HEIGHT_BITS - (yshift)), \ + } + +static const struct { + uint32_t x_shft; /* unused X-bits (as part of bpp) */ + uint32_t y_shft; /* unused Y-bits (as part of bpp) */ + uint32_t cpp; /* bytes/chars per pixel */ + uint32_t slot_w; /* width of each slot (in pixels) */ + uint32_t slot_h; /* height of each slot (in pixels) */ +} geom[TILFMT_NFORMATS] = { + [TILFMT_8BIT] = GEOM(0, 0, 1), + [TILFMT_16BIT] = GEOM(0, 1, 2), + [TILFMT_32BIT] = GEOM(1, 1, 4), + [TILFMT_PAGE] = GEOM(SLOT_WIDTH_BITS, SLOT_HEIGHT_BITS, 1), +}; + + +/* lookup table for registers w/ per-engine instances */ +static const uint32_t reg[][4] = { + [PAT_STATUS] = {DMM_PAT_STATUS__0, DMM_PAT_STATUS__1, + DMM_PAT_STATUS__2, DMM_PAT_STATUS__3}, + [PAT_DESCR] = {DMM_PAT_DESCR__0, DMM_PAT_DESCR__1, + DMM_PAT_DESCR__2, DMM_PAT_DESCR__3}, +}; + +/* simple allocator to grab next 16 byte aligned memory from txn */ +static void *alloc_dma(struct dmm_txn *txn, size_t sz, dma_addr_t *pa) +{ + void *ptr; + struct refill_engine *engine = txn->engine_handle; + + /* dmm programming requires 16 byte aligned addresses */ + txn->current_pa = round_up(txn->current_pa, 16); + txn->current_va = (void *)round_up((long)txn->current_va, 16); + + ptr = txn->current_va; + *pa = txn->current_pa; + + txn->current_pa += sz; + txn->current_va += sz; + + BUG_ON((txn->current_va - engine->refill_va) > REFILL_BUFFER_SIZE); + + return ptr; +} + +/* check status and spin until wait_mask comes true */ +static int wait_status(struct refill_engine *engine, uint32_t wait_mask) +{ + struct dmm *dmm = engine->dmm; + uint32_t r = 0, err, i; + + i = DMM_FIXED_RETRY_COUNT; + while (true) { + r = readl(dmm->base + reg[PAT_STATUS][engine->id]); + err = r & DMM_PATSTATUS_ERR; + if (err) + return -EFAULT; + + if ((r & wait_mask) == wait_mask) + break; + + if (--i == 0) + return -ETIMEDOUT; + + udelay(1); + } + + return 0; +} + +irqreturn_t omap_dmm_irq_handler(int irq, void *arg) +{ + struct dmm *dmm = arg; + uint32_t status = readl(dmm->base + DMM_PAT_IRQSTATUS); + int i; + + /* ack IRQ */ + writel(status, dmm->base + DMM_PAT_IRQSTATUS); + + for (i = 0; i < dmm->num_engines; i++) { + if (status & DMM_IRQSTAT_LST) + wake_up_interruptible(&dmm->engines[i].wait_for_refill); + + status >>= 8; + } + + return IRQ_HANDLED; +} + +/** + * Get a handle for a DMM transaction + */ +static struct dmm_txn *dmm_txn_init(struct dmm *dmm, struct tcm *tcm) +{ + struct dmm_txn *txn = NULL; + struct refill_engine *engine = NULL; + + down(&dmm->engine_sem); + + /* grab an idle engine */ + spin_lock(&dmm->list_lock); + if (!list_empty(&dmm->idle_head)) { + engine = list_entry(dmm->idle_head.next, struct refill_engine, + idle_node); + list_del(&engine->idle_node); + } + spin_unlock(&dmm->list_lock); + + BUG_ON(!engine); + + txn = &engine->txn; + engine->tcm = tcm; + txn->engine_handle = engine; + txn->last_pat = NULL; + txn->current_va = engine->refill_va; + txn->current_pa = engine->refill_pa; + + return txn; +} + +/** + * Add region to DMM transaction. If pages or pages[i] is NULL, then the + * corresponding slot is cleared (ie. dummy_pa is programmed) + */ +static int dmm_txn_append(struct dmm_txn *txn, struct pat_area *area, + struct page **pages, uint32_t npages, uint32_t roll) +{ + dma_addr_t pat_pa = 0; + uint32_t *data; + struct pat *pat; + struct refill_engine *engine = txn->engine_handle; + int columns = (1 + area->x1 - area->x0); + int rows = (1 + area->y1 - area->y0); + int i = columns*rows; + u32 *lut = omap_dmm->lut + (engine->tcm->lut_id * omap_dmm->lut_width * + omap_dmm->lut_height) + + (area->y0 * omap_dmm->lut_width) + area->x0; + + pat = alloc_dma(txn, sizeof(struct pat), &pat_pa); + + if (txn->last_pat) + txn->last_pat->next_pa = (uint32_t)pat_pa; + + pat->area = *area; + pat->ctrl = (struct pat_ctrl){ + .start = 1, + .lut_id = engine->tcm->lut_id, + }; + + data = alloc_dma(txn, 4*i, &pat->data_pa); + + while (i--) { + int n = i + roll; + if (n >= npages) + n -= npages; + data[i] = (pages && pages[n]) ? + page_to_phys(pages[n]) : engine->dmm->dummy_pa; + } + + /* fill in lut with new addresses */ + for (i = 0; i < rows; i++, lut += omap_dmm->lut_width) + memcpy(lut, &data[i*columns], columns * sizeof(u32)); + + txn->last_pat = pat; + + return 0; +} + +/** + * Commit the DMM transaction. + */ +static int dmm_txn_commit(struct dmm_txn *txn, bool wait) +{ + int ret = 0; + struct refill_engine *engine = txn->engine_handle; + struct dmm *dmm = engine->dmm; + + if (!txn->last_pat) { + dev_err(engine->dmm->dev, "need at least one txn\n"); + ret = -EINVAL; + goto cleanup; + } + + txn->last_pat->next_pa = 0; + + /* write to PAT_DESCR to clear out any pending transaction */ + writel(0x0, dmm->base + reg[PAT_DESCR][engine->id]); + + /* wait for engine ready: */ + ret = wait_status(engine, DMM_PATSTATUS_READY); + if (ret) { + ret = -EFAULT; + goto cleanup; + } + + /* kick reload */ + writel(engine->refill_pa, + dmm->base + reg[PAT_DESCR][engine->id]); + + if (wait) { + if (wait_event_interruptible_timeout(engine->wait_for_refill, + wait_status(engine, DMM_PATSTATUS_READY) == 0, + msecs_to_jiffies(1)) <= 0) { + dev_err(dmm->dev, "timed out waiting for done\n"); + ret = -ETIMEDOUT; + } + } + +cleanup: + spin_lock(&dmm->list_lock); + list_add(&engine->idle_node, &dmm->idle_head); + spin_unlock(&dmm->list_lock); + + up(&omap_dmm->engine_sem); + return ret; +} + +/* + * DMM programming + */ +static int fill(struct tcm_area *area, struct page **pages, + uint32_t npages, uint32_t roll, bool wait) +{ + int ret = 0; + struct tcm_area slice, area_s; + struct dmm_txn *txn; + + txn = dmm_txn_init(omap_dmm, area->tcm); + if (IS_ERR_OR_NULL(txn)) + return PTR_ERR(txn); + + tcm_for_each_slice(slice, *area, area_s) { + struct pat_area p_area = { + .x0 = slice.p0.x, .y0 = slice.p0.y, + .x1 = slice.p1.x, .y1 = slice.p1.y, + }; + + ret = dmm_txn_append(txn, &p_area, pages, npages, roll); + if (ret) + goto fail; + + roll += tcm_sizeof(slice); + } + + ret = dmm_txn_commit(txn, wait); + +fail: + return ret; +} + +/* + * Pin/unpin + */ + +/* note: slots for which pages[i] == NULL are filled w/ dummy page + */ +int tiler_pin(struct tiler_block *block, struct page **pages, + uint32_t npages, uint32_t roll, bool wait) +{ + int ret; + + ret = fill(&block->area, pages, npages, roll, wait); + + if (ret) + tiler_unpin(block); + + return ret; +} + +int tiler_unpin(struct tiler_block *block) +{ + return fill(&block->area, NULL, 0, 0, false); +} + +/* + * Reserve/release + */ +struct tiler_block *tiler_reserve_2d(enum tiler_fmt fmt, uint16_t w, + uint16_t h, uint16_t align) +{ + struct tiler_block *block = kzalloc(sizeof(*block), GFP_KERNEL); + u32 min_align = 128; + int ret; + + BUG_ON(!validfmt(fmt)); + + /* convert width/height to slots */ + w = DIV_ROUND_UP(w, geom[fmt].slot_w); + h = DIV_ROUND_UP(h, geom[fmt].slot_h); + + /* convert alignment to slots */ + min_align = max(min_align, (geom[fmt].slot_w * geom[fmt].cpp)); + align = ALIGN(align, min_align); + align /= geom[fmt].slot_w * geom[fmt].cpp; + + block->fmt = fmt; + + ret = tcm_reserve_2d(containers[fmt], w, h, align, &block->area); + if (ret) { + kfree(block); + return 0; + } + + /* add to allocation list */ + spin_lock(&omap_dmm->list_lock); + list_add(&block->alloc_node, &omap_dmm->alloc_head); + spin_unlock(&omap_dmm->list_lock); + + return block; +} + +struct tiler_block *tiler_reserve_1d(size_t size) +{ + struct tiler_block *block = kzalloc(sizeof(*block), GFP_KERNEL); + int num_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; + + if (!block) + return 0; + + block->fmt = TILFMT_PAGE; + + if (tcm_reserve_1d(containers[TILFMT_PAGE], num_pages, + &block->area)) { + kfree(block); + return 0; + } + + spin_lock(&omap_dmm->list_lock); + list_add(&block->alloc_node, &omap_dmm->alloc_head); + spin_unlock(&omap_dmm->list_lock); + + return block; +} + +/* note: if you have pin'd pages, you should have already unpin'd first! */ +int tiler_release(struct tiler_block *block) +{ + int ret = tcm_free(&block->area); + + if (block->area.tcm) + dev_err(omap_dmm->dev, "failed to release block\n"); + + spin_lock(&omap_dmm->list_lock); + list_del(&block->alloc_node); + spin_unlock(&omap_dmm->list_lock); + + kfree(block); + return ret; +} + +/* + * Utils + */ + +/* calculate the tiler space address of a pixel in a view orientation */ +static u32 tiler_get_address(u32 orient, enum tiler_fmt fmt, u32 x, u32 y) +{ + u32 x_bits, y_bits, tmp, x_mask, y_mask, alignment; + + x_bits = CONT_WIDTH_BITS - geom[fmt].x_shft; + y_bits = CONT_HEIGHT_BITS - geom[fmt].y_shft; + alignment = geom[fmt].x_shft + geom[fmt].y_shft; + + /* validate coordinate */ + x_mask = MASK(x_bits); + y_mask = MASK(y_bits); + + if (x < 0 || x > x_mask || y < 0 || y > y_mask) + return 0; + + /* account for mirroring */ + if (orient & MASK_X_INVERT) + x ^= x_mask; + if (orient & MASK_Y_INVERT) + y ^= y_mask; + + /* get coordinate address */ + if (orient & MASK_XY_FLIP) + tmp = ((x << y_bits) + y); + else + tmp = ((y << x_bits) + x); + + return TIL_ADDR((tmp << alignment), orient, fmt); +} + +dma_addr_t tiler_ssptr(struct tiler_block *block) +{ + BUG_ON(!validfmt(block->fmt)); + + return TILVIEW_8BIT + tiler_get_address(0, block->fmt, + block->area.p0.x * geom[block->fmt].slot_w, + block->area.p0.y * geom[block->fmt].slot_h); +} + +void tiler_align(enum tiler_fmt fmt, uint16_t *w, uint16_t *h) +{ + BUG_ON(!validfmt(fmt)); + *w = round_up(*w, geom[fmt].slot_w); + *h = round_up(*h, geom[fmt].slot_h); +} + +uint32_t tiler_stride(enum tiler_fmt fmt) +{ + BUG_ON(!validfmt(fmt)); + + return 1 << (CONT_WIDTH_BITS + geom[fmt].y_shft); +} + +size_t tiler_size(enum tiler_fmt fmt, uint16_t w, uint16_t h) +{ + tiler_align(fmt, &w, &h); + return geom[fmt].cpp * w * h; +} + +size_t tiler_vsize(enum tiler_fmt fmt, uint16_t w, uint16_t h) +{ + BUG_ON(!validfmt(fmt)); + return round_up(geom[fmt].cpp * w, PAGE_SIZE) * h; +} + +int omap_dmm_remove(void) +{ + struct tiler_block *block, *_block; + int i; + + if (omap_dmm) { + /* free all area regions */ + spin_lock(&omap_dmm->list_lock); + list_for_each_entry_safe(block, _block, &omap_dmm->alloc_head, + alloc_node) { + list_del(&block->alloc_node); + kfree(block); + } + spin_unlock(&omap_dmm->list_lock); + + for (i = 0; i < omap_dmm->num_lut; i++) + if (omap_dmm->tcm && omap_dmm->tcm[i]) + omap_dmm->tcm[i]->deinit(omap_dmm->tcm[i]); + kfree(omap_dmm->tcm); + + kfree(omap_dmm->engines); + if (omap_dmm->refill_va) + dma_free_coherent(omap_dmm->dev, + REFILL_BUFFER_SIZE * omap_dmm->num_engines, + omap_dmm->refill_va, + omap_dmm->refill_pa); + if (omap_dmm->dummy_page) + __free_page(omap_dmm->dummy_page); + + vfree(omap_dmm->lut); + + if (omap_dmm->irq != -1) + free_irq(omap_dmm->irq, omap_dmm); + + kfree(omap_dmm); + } + + return 0; +} + +int omap_dmm_init(struct drm_device *dev) +{ + int ret = -EFAULT, i; + struct tcm_area area = {0}; + u32 hwinfo, pat_geom, lut_table_size; + struct omap_drm_platform_data *pdata = dev->dev->platform_data; + + if (!pdata || !pdata->dmm_pdata) { + dev_err(dev->dev, "dmm platform data not present, skipping\n"); + return ret; + } + + omap_dmm = kzalloc(sizeof(*omap_dmm), GFP_KERNEL); + if (!omap_dmm) { + dev_err(dev->dev, "failed to allocate driver data section\n"); + goto fail; + } + + /* lookup hwmod data - base address and irq */ + omap_dmm->base = pdata->dmm_pdata->base; + omap_dmm->irq = pdata->dmm_pdata->irq; + omap_dmm->dev = dev->dev; + + if (!omap_dmm->base) { + dev_err(dev->dev, "failed to get dmm base address\n"); + goto fail; + } + + hwinfo = readl(omap_dmm->base + DMM_PAT_HWINFO); + omap_dmm->num_engines = (hwinfo >> 24) & 0x1F; + omap_dmm->num_lut = (hwinfo >> 16) & 0x1F; + omap_dmm->container_width = 256; + omap_dmm->container_height = 128; + + /* read out actual LUT width and height */ + pat_geom = readl(omap_dmm->base + DMM_PAT_GEOMETRY); + omap_dmm->lut_width = ((pat_geom >> 16) & 0xF) << 5; + omap_dmm->lut_height = ((pat_geom >> 24) & 0xF) << 5; + + /* initialize DMM registers */ + writel(0x88888888, omap_dmm->base + DMM_PAT_VIEW__0); + writel(0x88888888, omap_dmm->base + DMM_PAT_VIEW__1); + writel(0x80808080, omap_dmm->base + DMM_PAT_VIEW_MAP__0); + writel(0x80000000, omap_dmm->base + DMM_PAT_VIEW_MAP_BASE); + writel(0x88888888, omap_dmm->base + DMM_TILER_OR__0); + writel(0x88888888, omap_dmm->base + DMM_TILER_OR__1); + + ret = request_irq(omap_dmm->irq, omap_dmm_irq_handler, IRQF_SHARED, + "omap_dmm_irq_handler", omap_dmm); + + if (ret) { + dev_err(dev->dev, "couldn't register IRQ %d, error %d\n", + omap_dmm->irq, ret); + omap_dmm->irq = -1; + goto fail; + } + + /* Enable all interrupts for each refill engine except + * ERR_LUT_MISS<n> (which is just advisory, and we don't care + * about because we want to be able to refill live scanout + * buffers for accelerated pan/scroll) and FILL_DSC<n> which + * we just generally don't care about. + */ + writel(0x7e7e7e7e, omap_dmm->base + DMM_PAT_IRQENABLE_SET); + + lut_table_size = omap_dmm->lut_width * omap_dmm->lut_height * + omap_dmm->num_lut; + + omap_dmm->lut = vmalloc(lut_table_size * sizeof(*omap_dmm->lut)); + if (!omap_dmm->lut) { + dev_err(dev->dev, "could not allocate lut table\n"); + ret = -ENOMEM; + goto fail; + } + + omap_dmm->dummy_page = alloc_page(GFP_KERNEL | __GFP_DMA32); + if (!omap_dmm->dummy_page) { + dev_err(dev->dev, "could not allocate dummy page\n"); + ret = -ENOMEM; + goto fail; + } + omap_dmm->dummy_pa = page_to_phys(omap_dmm->dummy_page); + + /* alloc refill memory */ + omap_dmm->refill_va = dma_alloc_coherent(dev->dev, + REFILL_BUFFER_SIZE * omap_dmm->num_engines, + &omap_dmm->refill_pa, GFP_KERNEL); + if (!omap_dmm->refill_va) { + dev_err(dev->dev, "could not allocate refill memory\n"); + goto fail; + } + + /* alloc engines */ + omap_dmm->engines = kzalloc( + omap_dmm->num_engines * sizeof(struct refill_engine), + GFP_KERNEL); + if (!omap_dmm->engines) { + dev_err(dev->dev, "could not allocate engines\n"); + ret = -ENOMEM; + goto fail; + } + + sema_init(&omap_dmm->engine_sem, omap_dmm->num_engines); + INIT_LIST_HEAD(&omap_dmm->idle_head); + for (i = 0; i < omap_dmm->num_engines; i++) { + omap_dmm->engines[i].id = i; + omap_dmm->engines[i].dmm = omap_dmm; + omap_dmm->engines[i].refill_va = omap_dmm->refill_va + + (REFILL_BUFFER_SIZE * i); + omap_dmm->engines[i].refill_pa = omap_dmm->refill_pa + + (REFILL_BUFFER_SIZE * i); + init_waitqueue_head(&omap_dmm->engines[i].wait_for_refill); + + list_add(&omap_dmm->engines[i].idle_node, &omap_dmm->idle_head); + } + + omap_dmm->tcm = kzalloc(omap_dmm->num_lut * sizeof(*omap_dmm->tcm), + GFP_KERNEL); + if (!omap_dmm->tcm) { + dev_err(dev->dev, "failed to allocate lut ptrs\n"); + ret = -ENOMEM; + goto fail; + } + + /* init containers */ + for (i = 0; i < omap_dmm->num_lut; i++) { + omap_dmm->tcm[i] = sita_init(omap_dmm->container_width, + omap_dmm->container_height, + NULL); + + if (!omap_dmm->tcm[i]) { + dev_err(dev->dev, "failed to allocate container\n"); + ret = -ENOMEM; + goto fail; + } + + omap_dmm->tcm[i]->lut_id = i; + } + + /* assign access mode containers to applicable tcm container */ + /* OMAP 4 has 1 container for all 4 views */ + containers[TILFMT_8BIT] = omap_dmm->tcm[0]; + containers[TILFMT_16BIT] = omap_dmm->tcm[0]; + containers[TILFMT_32BIT] = omap_dmm->tcm[0]; + containers[TILFMT_PAGE] = omap_dmm->tcm[0]; + + INIT_LIST_HEAD(&omap_dmm->alloc_head); + spin_lock_init(&omap_dmm->list_lock); + + area = (struct tcm_area) { + .is2d = true, + .tcm = NULL, + .p1.x = omap_dmm->container_width - 1, + .p1.y = omap_dmm->container_height - 1, + }; + + for (i = 0; i < lut_table_size; i++) + omap_dmm->lut[i] = omap_dmm->dummy_pa; + + /* initialize all LUTs to dummy page entries */ + for (i = 0; i < omap_dmm->num_lut; i++) { + area.tcm = omap_dmm->tcm[i]; + if (fill(&area, NULL, 0, 0, true)) + dev_err(omap_dmm->dev, "refill failed"); + } + + dev_info(omap_dmm->dev, "initialized all PAT entries\n"); + + return 0; + +fail: + omap_dmm_remove(); + return ret; +} + +/* + * debugfs support + */ + +#ifdef CONFIG_DEBUG_FS + +static const char *alphabet = "abcdefghijklmnopqrstuvwxyz" + "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789"; +static const char *special = ".,:;'\"`~!^-+"; + +static void fill_map(char **map, int xdiv, int ydiv, struct tcm_area *a, + char c, bool ovw) +{ + int x, y; + for (y = a->p0.y / ydiv; y <= a->p1.y / ydiv; y++) + for (x = a->p0.x / xdiv; x <= a->p1.x / xdiv; x++) + if (map[y][x] == ' ' || ovw) + map[y][x] = c; +} + +static void fill_map_pt(char **map, int xdiv, int ydiv, struct tcm_pt *p, + char c) +{ + map[p->y / ydiv][p->x / xdiv] = c; +} + +static char read_map_pt(char **map, int xdiv, int ydiv, struct tcm_pt *p) +{ + return map[p->y / ydiv][p->x / xdiv]; +} + +static int map_width(int xdiv, int x0, int x1) +{ + return (x1 / xdiv) - (x0 / xdiv) + 1; +} + +static void text_map(char **map, int xdiv, char *nice, int yd, int x0, int x1) +{ + char *p = map[yd] + (x0 / xdiv); + int w = (map_width(xdiv, x0, x1) - strlen(nice)) / 2; + if (w >= 0) { + p += w; + while (*nice) + *p++ = *nice++; + } +} + +static void map_1d_info(char **map, int xdiv, int ydiv, char *nice, + struct tcm_area *a) +{ + sprintf(nice, "%dK", tcm_sizeof(*a) * 4); + if (a->p0.y + 1 < a->p1.y) { + text_map(map, xdiv, nice, (a->p0.y + a->p1.y) / 2 / ydiv, 0, + 256 - 1); + } else if (a->p0.y < a->p1.y) { + if (strlen(nice) < map_width(xdiv, a->p0.x, 256 - 1)) + text_map(map, xdiv, nice, a->p0.y / ydiv, + a->p0.x + xdiv, 256 - 1); + else if (strlen(nice) < map_width(xdiv, 0, a->p1.x)) + text_map(map, xdiv, nice, a->p1.y / ydiv, + 0, a->p1.y - xdiv); + } else if (strlen(nice) + 1 < map_width(xdiv, a->p0.x, a->p1.x)) { + text_map(map, xdiv, nice, a->p0.y / ydiv, a->p0.x, a->p1.x); + } +} + +static void map_2d_info(char **map, int xdiv, int ydiv, char *nice, + struct tcm_area *a) +{ + sprintf(nice, "(%d*%d)", tcm_awidth(*a), tcm_aheight(*a)); + if (strlen(nice) + 1 < map_width(xdiv, a->p0.x, a->p1.x)) + text_map(map, xdiv, nice, (a->p0.y + a->p1.y) / 2 / ydiv, + a->p0.x, a->p1.x); +} + +int tiler_map_show(struct seq_file *s, void *arg) +{ + int xdiv = 2, ydiv = 1; + char **map = NULL, *global_map; + struct tiler_block *block; + struct tcm_area a, p; + int i; + const char *m2d = alphabet; + const char *a2d = special; + const char *m2dp = m2d, *a2dp = a2d; + char nice[128]; + int h_adj = omap_dmm->lut_height / ydiv; + int w_adj = omap_dmm->lut_width / xdiv; + unsigned long flags; + + map = kzalloc(h_adj * sizeof(*map), GFP_KERNEL); + global_map = kzalloc((w_adj + 1) * h_adj, GFP_KERNEL); + + if (!map || !global_map) + goto error; + + memset(global_map, ' ', (w_adj + 1) * h_adj); + for (i = 0; i < omap_dmm->lut_height; i++) { + map[i] = global_map + i * (w_adj + 1); + map[i][w_adj] = 0; + } + spin_lock_irqsave(&omap_dmm->list_lock, flags); + + list_for_each_entry(block, &omap_dmm->alloc_head, alloc_node) { + if (block->fmt != TILFMT_PAGE) { + fill_map(map, xdiv, ydiv, &block->area, *m2dp, true); + if (!*++a2dp) + a2dp = a2d; + if (!*++m2dp) + m2dp = m2d; + map_2d_info(map, xdiv, ydiv, nice, &block->area); + } else { + bool start = read_map_pt(map, xdiv, ydiv, + &block->area.p0) + == ' '; + bool end = read_map_pt(map, xdiv, ydiv, &block->area.p1) + == ' '; + tcm_for_each_slice(a, block->area, p) + fill_map(map, xdiv, ydiv, &a, '=', true); + fill_map_pt(map, xdiv, ydiv, &block->area.p0, + start ? '<' : 'X'); + fill_map_pt(map, xdiv, ydiv, &block->area.p1, + end ? '>' : 'X'); + map_1d_info(map, xdiv, ydiv, nice, &block->area); + } + } + + spin_unlock_irqrestore(&omap_dmm->list_lock, flags); + + if (s) { + seq_printf(s, "BEGIN DMM TILER MAP\n"); + for (i = 0; i < 128; i++) + seq_printf(s, "%03d:%s\n", i, map[i]); + seq_printf(s, "END TILER MAP\n"); + } else { + dev_dbg(omap_dmm->dev, "BEGIN DMM TILER MAP\n"); + for (i = 0; i < 128; i++) + dev_dbg(omap_dmm->dev, "%03d:%s\n", i, map[i]); + dev_dbg(omap_dmm->dev, "END TILER MAP\n"); + } + +error: + kfree(map); + kfree(global_map); + + return 0; +} +#endif diff --git a/drivers/staging/omapdrm/omap_dmm_tiler.h b/drivers/staging/omapdrm/omap_dmm_tiler.h new file mode 100644 index 00000000000..f87cb657d68 --- /dev/null +++ b/drivers/staging/omapdrm/omap_dmm_tiler.h @@ -0,0 +1,135 @@ +/* + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Author: Rob Clark <rob@ti.com> + * Andy Gross <andy.gross@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef OMAP_DMM_TILER_H +#define OMAP_DMM_TILER_H + +#include "omap_drv.h" +#include "tcm.h" + +enum tiler_fmt { + TILFMT_8BIT = 0, + TILFMT_16BIT, + TILFMT_32BIT, + TILFMT_PAGE, + TILFMT_NFORMATS +}; + +struct pat_area { + u32 x0:8; + u32 y0:8; + u32 x1:8; + u32 y1:8; +}; + +struct tiler_block { + struct list_head alloc_node; /* node for global block list */ + struct tcm_area area; /* area */ + enum tiler_fmt fmt; /* format */ +}; + +/* bits representing the same slot in DMM-TILER hw-block */ +#define SLOT_WIDTH_BITS 6 +#define SLOT_HEIGHT_BITS 6 + +/* bits reserved to describe coordinates in DMM-TILER hw-block */ +#define CONT_WIDTH_BITS 14 +#define CONT_HEIGHT_BITS 13 + +/* calculated constants */ +#define TILER_PAGE (1 << (SLOT_WIDTH_BITS + SLOT_HEIGHT_BITS)) +#define TILER_WIDTH (1 << (CONT_WIDTH_BITS - SLOT_WIDTH_BITS)) +#define TILER_HEIGHT (1 << (CONT_HEIGHT_BITS - SLOT_HEIGHT_BITS)) + +/* tiler space addressing bitfields */ +#define MASK_XY_FLIP (1 << 31) +#define MASK_Y_INVERT (1 << 30) +#define MASK_X_INVERT (1 << 29) +#define SHIFT_ACC_MODE 27 +#define MASK_ACC_MODE 3 + +#define MASK(bits) ((1 << (bits)) - 1) + +#define TILVIEW_8BIT 0x60000000u +#define TILVIEW_16BIT (TILVIEW_8BIT + VIEW_SIZE) +#define TILVIEW_32BIT (TILVIEW_16BIT + VIEW_SIZE) +#define TILVIEW_PAGE (TILVIEW_32BIT + VIEW_SIZE) +#define TILVIEW_END (TILVIEW_PAGE + VIEW_SIZE) + +/* create tsptr by adding view orientation and access mode */ +#define TIL_ADDR(x, orient, a)\ + ((u32) (x) | (orient) | ((a) << SHIFT_ACC_MODE)) + +/* externally accessible functions */ +int omap_dmm_init(struct drm_device *dev); +int omap_dmm_remove(void); + +#ifdef CONFIG_DEBUG_FS +int tiler_map_show(struct seq_file *s, void *arg); +#endif + +/* pin/unpin */ +int tiler_pin(struct tiler_block *block, struct page **pages, + uint32_t npages, uint32_t roll, bool wait); +int tiler_unpin(struct tiler_block *block); + +/* reserve/release */ +struct tiler_block *tiler_reserve_2d(enum tiler_fmt fmt, uint16_t w, uint16_t h, + uint16_t align); +struct tiler_block *tiler_reserve_1d(size_t size); +int tiler_release(struct tiler_block *block); + +/* utilities */ +dma_addr_t tiler_ssptr(struct tiler_block *block); +uint32_t tiler_stride(enum tiler_fmt fmt); +size_t tiler_size(enum tiler_fmt fmt, uint16_t w, uint16_t h); +size_t tiler_vsize(enum tiler_fmt fmt, uint16_t w, uint16_t h); +void tiler_align(enum tiler_fmt fmt, uint16_t *w, uint16_t *h); + + +/* GEM bo flags -> tiler fmt */ +static inline enum tiler_fmt gem2fmt(uint32_t flags) +{ + switch (flags & OMAP_BO_TILED) { + case OMAP_BO_TILED_8: + return TILFMT_8BIT; + case OMAP_BO_TILED_16: + return TILFMT_16BIT; + case OMAP_BO_TILED_32: + return TILFMT_32BIT; + default: + return TILFMT_PAGE; + } +} + +static inline bool validfmt(enum tiler_fmt fmt) +{ + switch (fmt) { + case TILFMT_8BIT: + case TILFMT_16BIT: + case TILFMT_32BIT: + case TILFMT_PAGE: + return true; + default: + return false; + } +} + +struct omap_dmm_platform_data { + void __iomem *base; + int irq; +}; + +#endif diff --git a/drivers/staging/omapdrm/omap_drm.h b/drivers/staging/omapdrm/omap_drm.h new file mode 100644 index 00000000000..f0ac34a8973 --- /dev/null +++ b/drivers/staging/omapdrm/omap_drm.h @@ -0,0 +1,123 @@ +/* + * include/drm/omap_drm.h + * + * Copyright (C) 2011 Texas Instruments + * Author: Rob Clark <rob@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __OMAP_DRM_H__ +#define __OMAP_DRM_H__ + +#include <drm/drm.h> + +/* Please note that modifications to all structs defined here are + * subject to backwards-compatibility constraints. + */ + +#define OMAP_PARAM_CHIPSET_ID 1 /* ie. 0x3430, 0x4430, etc */ + +struct drm_omap_param { + uint64_t param; /* in */ + uint64_t value; /* in (set_param), out (get_param) */ +}; + +#define OMAP_BO_SCANOUT 0x00000001 /* scanout capable (phys contiguous) */ +#define OMAP_BO_CACHE_MASK 0x00000006 /* cache type mask, see cache modes */ +#define OMAP_BO_TILED_MASK 0x00000f00 /* tiled mapping mask, see tiled modes */ + +/* cache modes */ +#define OMAP_BO_CACHED 0x00000000 /* default */ +#define OMAP_BO_WC 0x00000002 /* write-combine */ +#define OMAP_BO_UNCACHED 0x00000004 /* strongly-ordered (uncached) */ + +/* tiled modes */ +#define OMAP_BO_TILED_8 0x00000100 +#define OMAP_BO_TILED_16 0x00000200 +#define OMAP_BO_TILED_32 0x00000300 +#define OMAP_BO_TILED (OMAP_BO_TILED_8 | OMAP_BO_TILED_16 | OMAP_BO_TILED_32) + +union omap_gem_size { + uint32_t bytes; /* (for non-tiled formats) */ + struct { + uint16_t width; + uint16_t height; + } tiled; /* (for tiled formats) */ +}; + +struct drm_omap_gem_new { + union omap_gem_size size; /* in */ + uint32_t flags; /* in */ + uint32_t handle; /* out */ + uint32_t __pad; +}; + +/* mask of operations: */ +enum omap_gem_op { + OMAP_GEM_READ = 0x01, + OMAP_GEM_WRITE = 0x02, +}; + +struct drm_omap_gem_cpu_prep { + uint32_t handle; /* buffer handle (in) */ + uint32_t op; /* mask of omap_gem_op (in) */ +}; + +struct drm_omap_gem_cpu_fini { + uint32_t handle; /* buffer handle (in) */ + uint32_t op; /* mask of omap_gem_op (in) */ + /* TODO maybe here we pass down info about what regions are touched + * by sw so we can be clever about cache ops? For now a placeholder, + * set to zero and we just do full buffer flush.. + */ + uint32_t nregions; + uint32_t __pad; +}; + +struct drm_omap_gem_info { + uint32_t handle; /* buffer handle (in) */ + uint32_t pad; + uint64_t offset; /* mmap offset (out) */ + /* note: in case of tiled buffers, the user virtual size can be + * different from the physical size (ie. how many pages are needed + * to back the object) which is returned in DRM_IOCTL_GEM_OPEN.. + * This size here is the one that should be used if you want to + * mmap() the buffer: + */ + uint32_t size; /* virtual size for mmap'ing (out) */ + uint32_t __pad; +}; + +#define DRM_OMAP_GET_PARAM 0x00 +#define DRM_OMAP_SET_PARAM 0x01 +/* placeholder for plugin-api +#define DRM_OMAP_GET_BASE 0x02 +*/ +#define DRM_OMAP_GEM_NEW 0x03 +#define DRM_OMAP_GEM_CPU_PREP 0x04 +#define DRM_OMAP_GEM_CPU_FINI 0x05 +#define DRM_OMAP_GEM_INFO 0x06 +#define DRM_OMAP_NUM_IOCTLS 0x07 + +#define DRM_IOCTL_OMAP_GET_PARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_OMAP_GET_PARAM, struct drm_omap_param) +#define DRM_IOCTL_OMAP_SET_PARAM DRM_IOW (DRM_COMMAND_BASE + DRM_OMAP_SET_PARAM, struct drm_omap_param) +/* placeholder for plugin-api +#define DRM_IOCTL_OMAP_GET_BASE DRM_IOWR(DRM_COMMAND_BASE + DRM_OMAP_GET_BASE, struct drm_omap_get_base) +*/ +#define DRM_IOCTL_OMAP_GEM_NEW DRM_IOWR(DRM_COMMAND_BASE + DRM_OMAP_GEM_NEW, struct drm_omap_gem_new) +#define DRM_IOCTL_OMAP_GEM_CPU_PREP DRM_IOW (DRM_COMMAND_BASE + DRM_OMAP_GEM_CPU_PREP, struct drm_omap_gem_cpu_prep) +#define DRM_IOCTL_OMAP_GEM_CPU_FINI DRM_IOW (DRM_COMMAND_BASE + DRM_OMAP_GEM_CPU_FINI, struct drm_omap_gem_cpu_fini) +#define DRM_IOCTL_OMAP_GEM_INFO DRM_IOWR(DRM_COMMAND_BASE + DRM_OMAP_GEM_INFO, struct drm_omap_gem_info) + +#endif /* __OMAP_DRM_H__ */ diff --git a/drivers/staging/omapdrm/omap_drv.c b/drivers/staging/omapdrm/omap_drv.c new file mode 100644 index 00000000000..602aa2dd49c --- /dev/null +++ b/drivers/staging/omapdrm/omap_drv.c @@ -0,0 +1,821 @@ +/* + * drivers/staging/omapdrm/omap_drv.c + * + * Copyright (C) 2011 Texas Instruments + * Author: Rob Clark <rob@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "omap_drv.h" + +#include "drm_crtc_helper.h" +#include "drm_fb_helper.h" + +#define DRIVER_NAME MODULE_NAME +#define DRIVER_DESC "OMAP DRM" +#define DRIVER_DATE "20110917" +#define DRIVER_MAJOR 1 +#define DRIVER_MINOR 0 +#define DRIVER_PATCHLEVEL 0 + +struct drm_device *drm_device; + +static int num_crtc = CONFIG_DRM_OMAP_NUM_CRTCS; + +MODULE_PARM_DESC(num_crtc, "Number of overlays to use as CRTCs"); +module_param(num_crtc, int, 0600); + +/* + * mode config funcs + */ + +/* Notes about mapping DSS and DRM entities: + * CRTC: overlay + * encoder: manager.. with some extension to allow one primary CRTC + * and zero or more video CRTC's to be mapped to one encoder? + * connector: dssdev.. manager can be attached/detached from different + * devices + */ + +static void omap_fb_output_poll_changed(struct drm_device *dev) +{ + struct omap_drm_private *priv = dev->dev_private; + DBG("dev=%p", dev); + if (priv->fbdev) { + drm_fb_helper_hotplug_event(priv->fbdev); + } +} + +static struct drm_mode_config_funcs omap_mode_config_funcs = { + .fb_create = omap_framebuffer_create, + .output_poll_changed = omap_fb_output_poll_changed, +}; + +static int get_connector_type(struct omap_dss_device *dssdev) +{ + switch (dssdev->type) { + case OMAP_DISPLAY_TYPE_HDMI: + return DRM_MODE_CONNECTOR_HDMIA; + case OMAP_DISPLAY_TYPE_DPI: + if (!strcmp(dssdev->name, "dvi")) + return DRM_MODE_CONNECTOR_DVID; + /* fallthrough */ + default: + return DRM_MODE_CONNECTOR_Unknown; + } +} + +#if 0 /* enable when dss2 supports hotplug */ +static int omap_drm_notifier(struct notifier_block *nb, + unsigned long evt, void *arg) +{ + switch (evt) { + case OMAP_DSS_SIZE_CHANGE: + case OMAP_DSS_HOTPLUG_CONNECT: + case OMAP_DSS_HOTPLUG_DISCONNECT: { + struct drm_device *dev = drm_device; + DBG("hotplug event: evt=%d, dev=%p", evt, dev); + if (dev) { + drm_sysfs_hotplug_event(dev); + } + return NOTIFY_OK; + } + default: /* don't care about other events for now */ + return NOTIFY_DONE; + } +} +#endif + +static void dump_video_chains(void) +{ + int i; + + DBG("dumping video chains: "); + for (i = 0; i < omap_dss_get_num_overlays(); i++) { + struct omap_overlay *ovl = omap_dss_get_overlay(i); + struct omap_overlay_manager *mgr = ovl->manager; + struct omap_dss_device *dssdev = mgr ? mgr->device : NULL; + if (dssdev) { + DBG("%d: %s -> %s -> %s", i, ovl->name, mgr->name, + dssdev->name); + } else if (mgr) { + DBG("%d: %s -> %s", i, ovl->name, mgr->name); + } else { + DBG("%d: %s", i, ovl->name); + } + } +} + +/* create encoders for each manager */ +static int create_encoder(struct drm_device *dev, + struct omap_overlay_manager *mgr) +{ + struct omap_drm_private *priv = dev->dev_private; + struct drm_encoder *encoder = omap_encoder_init(dev, mgr); + + if (!encoder) { + dev_err(dev->dev, "could not create encoder: %s\n", + mgr->name); + return -ENOMEM; + } + + BUG_ON(priv->num_encoders >= ARRAY_SIZE(priv->encoders)); + + priv->encoders[priv->num_encoders++] = encoder; + + return 0; +} + +/* create connectors for each display device */ +static int create_connector(struct drm_device *dev, + struct omap_dss_device *dssdev) +{ + struct omap_drm_private *priv = dev->dev_private; + static struct notifier_block *notifier; + struct drm_connector *connector; + int j; + + if (!dssdev->driver) { + dev_warn(dev->dev, "%s has no driver.. skipping it\n", + dssdev->name); + return 0; + } + + if (!(dssdev->driver->get_timings || + dssdev->driver->read_edid)) { + dev_warn(dev->dev, "%s driver does not support " + "get_timings or read_edid.. skipping it!\n", + dssdev->name); + return 0; + } + + connector = omap_connector_init(dev, + get_connector_type(dssdev), dssdev); + + if (!connector) { + dev_err(dev->dev, "could not create connector: %s\n", + dssdev->name); + return -ENOMEM; + } + + BUG_ON(priv->num_connectors >= ARRAY_SIZE(priv->connectors)); + + priv->connectors[priv->num_connectors++] = connector; + +#if 0 /* enable when dss2 supports hotplug */ + notifier = kzalloc(sizeof(struct notifier_block), GFP_KERNEL); + notifier->notifier_call = omap_drm_notifier; + omap_dss_add_notify(dssdev, notifier); +#else + notifier = NULL; +#endif + + for (j = 0; j < priv->num_encoders; j++) { + struct omap_overlay_manager *mgr = + omap_encoder_get_manager(priv->encoders[j]); + if (mgr->device == dssdev) { + drm_mode_connector_attach_encoder(connector, + priv->encoders[j]); + } + } + + return 0; +} + +/* create up to max_overlays CRTCs mapping to overlays.. by default, + * connect the overlays to different managers/encoders, giving priority + * to encoders connected to connectors with a detected connection + */ +static int create_crtc(struct drm_device *dev, struct omap_overlay *ovl, + int *j, unsigned int connected_connectors) +{ + struct omap_drm_private *priv = dev->dev_private; + struct omap_overlay_manager *mgr = NULL; + struct drm_crtc *crtc; + + if (ovl->manager) { + DBG("disconnecting %s from %s", ovl->name, + ovl->manager->name); + ovl->unset_manager(ovl); + } + + /* find next best connector, ones with detected connection first + */ + while (*j < priv->num_connectors && !mgr) { + if (connected_connectors & (1 << *j)) { + struct drm_encoder *encoder = + omap_connector_attached_encoder( + priv->connectors[*j]); + if (encoder) { + mgr = omap_encoder_get_manager(encoder); + } + } + (*j)++; + } + + /* if we couldn't find another connected connector, lets start + * looking at the unconnected connectors: + * + * note: it might not be immediately apparent, but thanks to + * the !mgr check in both this loop and the one above, the only + * way to enter this loop is with *j == priv->num_connectors, + * so idx can never go negative. + */ + while (*j < 2 * priv->num_connectors && !mgr) { + int idx = *j - priv->num_connectors; + if (!(connected_connectors & (1 << idx))) { + struct drm_encoder *encoder = + omap_connector_attached_encoder( + priv->connectors[idx]); + if (encoder) { + mgr = omap_encoder_get_manager(encoder); + } + } + (*j)++; + } + + if (mgr) { + DBG("connecting %s to %s", ovl->name, mgr->name); + ovl->set_manager(ovl, mgr); + } + + crtc = omap_crtc_init(dev, ovl, priv->num_crtcs); + + if (!crtc) { + dev_err(dev->dev, "could not create CRTC: %s\n", + ovl->name); + return -ENOMEM; + } + + BUG_ON(priv->num_crtcs >= ARRAY_SIZE(priv->crtcs)); + + priv->crtcs[priv->num_crtcs++] = crtc; + + return 0; +} + +static int match_dev_name(struct omap_dss_device *dssdev, void *data) +{ + return !strcmp(dssdev->name, data); +} + +static unsigned int detect_connectors(struct drm_device *dev) +{ + struct omap_drm_private *priv = dev->dev_private; + unsigned int connected_connectors = 0; + int i; + + for (i = 0; i < priv->num_connectors; i++) { + struct drm_connector *connector = priv->connectors[i]; + if (omap_connector_detect(connector, true) == + connector_status_connected) { + connected_connectors |= (1 << i); + } + } + + return connected_connectors; +} + +static int omap_modeset_init(struct drm_device *dev) +{ + const struct omap_drm_platform_data *pdata = dev->dev->platform_data; + struct omap_kms_platform_data *kms_pdata = NULL; + struct omap_drm_private *priv = dev->dev_private; + struct omap_dss_device *dssdev = NULL; + int i, j; + unsigned int connected_connectors = 0; + + drm_mode_config_init(dev); + + if (pdata && pdata->kms_pdata) { + kms_pdata = pdata->kms_pdata; + + /* if platform data is provided by the board file, use it to + * control which overlays, managers, and devices we own. + */ + for (i = 0; i < kms_pdata->mgr_cnt; i++) { + struct omap_overlay_manager *mgr = + omap_dss_get_overlay_manager( + kms_pdata->mgr_ids[i]); + create_encoder(dev, mgr); + } + + for (i = 0; i < kms_pdata->dev_cnt; i++) { + struct omap_dss_device *dssdev = + omap_dss_find_device( + (void *)kms_pdata->dev_names[i], + match_dev_name); + if (!dssdev) { + dev_warn(dev->dev, "no such dssdev: %s\n", + kms_pdata->dev_names[i]); + continue; + } + create_connector(dev, dssdev); + } + + connected_connectors = detect_connectors(dev); + + j = 0; + for (i = 0; i < kms_pdata->ovl_cnt; i++) { + struct omap_overlay *ovl = + omap_dss_get_overlay(kms_pdata->ovl_ids[i]); + create_crtc(dev, ovl, &j, connected_connectors); + } + } else { + /* otherwise just grab up to CONFIG_DRM_OMAP_NUM_CRTCS and try + * to make educated guesses about everything else + */ + int max_overlays = min(omap_dss_get_num_overlays(), num_crtc); + + for (i = 0; i < omap_dss_get_num_overlay_managers(); i++) { + create_encoder(dev, omap_dss_get_overlay_manager(i)); + } + + for_each_dss_dev(dssdev) { + create_connector(dev, dssdev); + } + + connected_connectors = detect_connectors(dev); + + j = 0; + for (i = 0; i < max_overlays; i++) { + create_crtc(dev, omap_dss_get_overlay(i), + &j, connected_connectors); + } + } + + /* for now keep the mapping of CRTCs and encoders static.. */ + for (i = 0; i < priv->num_encoders; i++) { + struct drm_encoder *encoder = priv->encoders[i]; + struct omap_overlay_manager *mgr = + omap_encoder_get_manager(encoder); + + encoder->possible_crtcs = 0; + + for (j = 0; j < priv->num_crtcs; j++) { + struct omap_overlay *ovl = + omap_crtc_get_overlay(priv->crtcs[j]); + if (ovl->manager == mgr) { + encoder->possible_crtcs |= (1 << j); + } + } + + DBG("%s: possible_crtcs=%08x", mgr->name, + encoder->possible_crtcs); + } + + dump_video_chains(); + + dev->mode_config.min_width = 256; + dev->mode_config.min_height = 256; + + /* note: eventually will need some cpu_is_omapXYZ() type stuff here + * to fill in these limits properly on different OMAP generations.. + */ + dev->mode_config.max_width = 2048; + dev->mode_config.max_height = 2048; + + dev->mode_config.funcs = &omap_mode_config_funcs; + + return 0; +} + +static void omap_modeset_free(struct drm_device *dev) +{ + drm_mode_config_cleanup(dev); +} + +/* + * drm ioctl funcs + */ + + +static int ioctl_get_param(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_omap_param *args = data; + + DBG("%p: param=%llu", dev, args->param); + + switch (args->param) { + case OMAP_PARAM_CHIPSET_ID: + args->value = GET_OMAP_TYPE; + break; + default: + DBG("unknown parameter %lld", args->param); + return -EINVAL; + } + + return 0; +} + +static int ioctl_set_param(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_omap_param *args = data; + + switch (args->param) { + default: + DBG("unknown parameter %lld", args->param); + return -EINVAL; + } + + return 0; +} + +static int ioctl_gem_new(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_omap_gem_new *args = data; + DBG("%p:%p: size=0x%08x, flags=%08x", dev, file_priv, + args->size.bytes, args->flags); + return omap_gem_new_handle(dev, file_priv, args->size, + args->flags, &args->handle); +} + +static int ioctl_gem_cpu_prep(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_omap_gem_cpu_prep *args = data; + struct drm_gem_object *obj; + int ret; + + VERB("%p:%p: handle=%d, op=%x", dev, file_priv, args->handle, args->op); + + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (!obj) { + return -ENOENT; + } + + ret = omap_gem_op_sync(obj, args->op); + + if (!ret) { + ret = omap_gem_op_start(obj, args->op); + } + + drm_gem_object_unreference_unlocked(obj); + + return ret; +} + +static int ioctl_gem_cpu_fini(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_omap_gem_cpu_fini *args = data; + struct drm_gem_object *obj; + int ret; + + VERB("%p:%p: handle=%d", dev, file_priv, args->handle); + + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (!obj) { + return -ENOENT; + } + + /* XXX flushy, flushy */ + ret = 0; + + if (!ret) { + ret = omap_gem_op_finish(obj, args->op); + } + + drm_gem_object_unreference_unlocked(obj); + + return ret; +} + +static int ioctl_gem_info(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_omap_gem_info *args = data; + struct drm_gem_object *obj; + int ret = 0; + + DBG("%p:%p: handle=%d", dev, file_priv, args->handle); + + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (!obj) { + return -ENOENT; + } + + args->size = omap_gem_mmap_size(obj); + args->offset = omap_gem_mmap_offset(obj); + + drm_gem_object_unreference_unlocked(obj); + + return ret; +} + +struct drm_ioctl_desc ioctls[DRM_COMMAND_END - DRM_COMMAND_BASE] = { + DRM_IOCTL_DEF_DRV(OMAP_GET_PARAM, ioctl_get_param, DRM_UNLOCKED|DRM_AUTH), + DRM_IOCTL_DEF_DRV(OMAP_SET_PARAM, ioctl_set_param, DRM_UNLOCKED|DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), + DRM_IOCTL_DEF_DRV(OMAP_GEM_NEW, ioctl_gem_new, DRM_UNLOCKED|DRM_AUTH), + DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_PREP, ioctl_gem_cpu_prep, DRM_UNLOCKED|DRM_AUTH), + DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_FINI, ioctl_gem_cpu_fini, DRM_UNLOCKED|DRM_AUTH), + DRM_IOCTL_DEF_DRV(OMAP_GEM_INFO, ioctl_gem_info, DRM_UNLOCKED|DRM_AUTH), +}; + +/* + * drm driver funcs + */ + +/** + * load - setup chip and create an initial config + * @dev: DRM device + * @flags: startup flags + * + * The driver load routine has to do several things: + * - initialize the memory manager + * - allocate initial config memory + * - setup the DRM framebuffer with the allocated memory + */ +static int dev_load(struct drm_device *dev, unsigned long flags) +{ + struct omap_drm_private *priv; + int ret; + + DBG("load: dev=%p", dev); + + drm_device = dev; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(dev->dev, "could not allocate priv\n"); + return -ENOMEM; + } + + dev->dev_private = priv; + + omap_gem_init(dev); + + ret = omap_modeset_init(dev); + if (ret) { + dev_err(dev->dev, "omap_modeset_init failed: ret=%d\n", ret); + dev->dev_private = NULL; + kfree(priv); + return ret; + } + + priv->fbdev = omap_fbdev_init(dev); + if (!priv->fbdev) { + dev_warn(dev->dev, "omap_fbdev_init failed\n"); + /* well, limp along without an fbdev.. maybe X11 will work? */ + } + + drm_kms_helper_poll_init(dev); + + ret = drm_vblank_init(dev, priv->num_crtcs); + if (ret) { + dev_warn(dev->dev, "could not init vblank\n"); + } + + return 0; +} + +static int dev_unload(struct drm_device *dev) +{ + DBG("unload: dev=%p", dev); + + drm_vblank_cleanup(dev); + drm_kms_helper_poll_fini(dev); + + omap_fbdev_free(dev); + omap_modeset_free(dev); + omap_gem_deinit(dev); + + kfree(dev->dev_private); + dev->dev_private = NULL; + + return 0; +} + +static int dev_open(struct drm_device *dev, struct drm_file *file) +{ + file->driver_priv = NULL; + + DBG("open: dev=%p, file=%p", dev, file); + + return 0; +} + +static int dev_firstopen(struct drm_device *dev) +{ + DBG("firstopen: dev=%p", dev); + return 0; +} + +/** + * lastclose - clean up after all DRM clients have exited + * @dev: DRM device + * + * Take care of cleaning up after all DRM clients have exited. In the + * mode setting case, we want to restore the kernel's initial mode (just + * in case the last client left us in a bad state). + */ +static void dev_lastclose(struct drm_device *dev) +{ + /* we don't support vga-switcheroo.. so just make sure the fbdev + * mode is active + */ + struct omap_drm_private *priv = dev->dev_private; + int ret; + + DBG("lastclose: dev=%p", dev); + + ret = drm_fb_helper_restore_fbdev_mode(priv->fbdev); + if (ret) + DBG("failed to restore crtc mode"); +} + +static void dev_preclose(struct drm_device *dev, struct drm_file *file) +{ + DBG("preclose: dev=%p", dev); +} + +static void dev_postclose(struct drm_device *dev, struct drm_file *file) +{ + DBG("postclose: dev=%p, file=%p", dev, file); +} + +/** + * enable_vblank - enable vblank interrupt events + * @dev: DRM device + * @crtc: which irq to enable + * + * Enable vblank interrupts for @crtc. If the device doesn't have + * a hardware vblank counter, this routine should be a no-op, since + * interrupts will have to stay on to keep the count accurate. + * + * RETURNS + * Zero on success, appropriate errno if the given @crtc's vblank + * interrupt cannot be enabled. + */ +static int dev_enable_vblank(struct drm_device *dev, int crtc) +{ + DBG("enable_vblank: dev=%p, crtc=%d", dev, crtc); + return 0; +} + +/** + * disable_vblank - disable vblank interrupt events + * @dev: DRM device + * @crtc: which irq to enable + * + * Disable vblank interrupts for @crtc. If the device doesn't have + * a hardware vblank counter, this routine should be a no-op, since + * interrupts will have to stay on to keep the count accurate. + */ +static void dev_disable_vblank(struct drm_device *dev, int crtc) +{ + DBG("disable_vblank: dev=%p, crtc=%d", dev, crtc); +} + +static irqreturn_t dev_irq_handler(DRM_IRQ_ARGS) +{ + return IRQ_HANDLED; +} + +static void dev_irq_preinstall(struct drm_device *dev) +{ + DBG("irq_preinstall: dev=%p", dev); +} + +static int dev_irq_postinstall(struct drm_device *dev) +{ + DBG("irq_postinstall: dev=%p", dev); + return 0; +} + +static void dev_irq_uninstall(struct drm_device *dev) +{ + DBG("irq_uninstall: dev=%p", dev); +} + +static struct vm_operations_struct omap_gem_vm_ops = { + .fault = omap_gem_fault, + .open = drm_gem_vm_open, + .close = drm_gem_vm_close, +}; + +static struct drm_driver omap_drm_driver = { + .driver_features = + DRIVER_HAVE_IRQ | DRIVER_MODESET | DRIVER_GEM, + .load = dev_load, + .unload = dev_unload, + .open = dev_open, + .firstopen = dev_firstopen, + .lastclose = dev_lastclose, + .preclose = dev_preclose, + .postclose = dev_postclose, + .get_vblank_counter = drm_vblank_count, + .enable_vblank = dev_enable_vblank, + .disable_vblank = dev_disable_vblank, + .irq_preinstall = dev_irq_preinstall, + .irq_postinstall = dev_irq_postinstall, + .irq_uninstall = dev_irq_uninstall, + .irq_handler = dev_irq_handler, + .reclaim_buffers = drm_core_reclaim_buffers, +#ifdef CONFIG_DEBUG_FS + .debugfs_init = omap_debugfs_init, + .debugfs_cleanup = omap_debugfs_cleanup, +#endif + .gem_init_object = omap_gem_init_object, + .gem_free_object = omap_gem_free_object, + .gem_vm_ops = &omap_gem_vm_ops, + .dumb_create = omap_gem_dumb_create, + .dumb_map_offset = omap_gem_dumb_map_offset, + .dumb_destroy = omap_gem_dumb_destroy, + .ioctls = ioctls, + .num_ioctls = DRM_OMAP_NUM_IOCTLS, + .fops = { + .owner = THIS_MODULE, + .open = drm_open, + .unlocked_ioctl = drm_ioctl, + .release = drm_release, + .mmap = omap_gem_mmap, + .poll = drm_poll, + .fasync = drm_fasync, + .read = drm_read, + .llseek = noop_llseek, + }, + .name = DRIVER_NAME, + .desc = DRIVER_DESC, + .date = DRIVER_DATE, + .major = DRIVER_MAJOR, + .minor = DRIVER_MINOR, + .patchlevel = DRIVER_PATCHLEVEL, +}; + +static int pdev_suspend(struct platform_device *pDevice, pm_message_t state) +{ + DBG(""); + return 0; +} + +static int pdev_resume(struct platform_device *device) +{ + DBG(""); + return 0; +} + +static void pdev_shutdown(struct platform_device *device) +{ + DBG(""); +} + +static int pdev_probe(struct platform_device *device) +{ + DBG("%s", device->name); + return drm_platform_init(&omap_drm_driver, device); +} + +static int pdev_remove(struct platform_device *device) +{ + DBG(""); + drm_platform_exit(&omap_drm_driver, device); + return 0; +} + +struct platform_driver pdev = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, + .probe = pdev_probe, + .remove = pdev_remove, + .suspend = pdev_suspend, + .resume = pdev_resume, + .shutdown = pdev_shutdown, +}; + +static int __init omap_drm_init(void) +{ + DBG("init"); + return platform_driver_register(&pdev); +} + +static void __exit omap_drm_fini(void) +{ + DBG("fini"); + platform_driver_unregister(&pdev); +} + +/* need late_initcall() so we load after dss_driver's are loaded */ +late_initcall(omap_drm_init); +module_exit(omap_drm_fini); + +MODULE_AUTHOR("Rob Clark <rob@ti.com>"); +MODULE_DESCRIPTION("OMAP DRM Display Driver"); +MODULE_ALIAS("platform:" DRIVER_NAME); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/omapdrm/omap_drv.h b/drivers/staging/omapdrm/omap_drv.h new file mode 100644 index 00000000000..76c42515ecc --- /dev/null +++ b/drivers/staging/omapdrm/omap_drv.h @@ -0,0 +1,135 @@ +/* + * drivers/staging/omapdrm/omap_drv.h + * + * Copyright (C) 2011 Texas Instruments + * Author: Rob Clark <rob@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __OMAP_DRV_H__ +#define __OMAP_DRV_H__ + +#include <video/omapdss.h> +#include <linux/module.h> +#include <linux/types.h> +#include <drm/drmP.h> +#include "omap_drm.h" +#include "omap_priv.h" + +#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__) +#define VERB(fmt, ...) if (0) DRM_DEBUG(fmt, ##__VA_ARGS__) /* verbose debug */ + +#define MODULE_NAME "omapdrm" + +/* max # of mapper-id's that can be assigned.. todo, come up with a better + * (but still inexpensive) way to store/access per-buffer mapper private + * data.. + */ +#define MAX_MAPPERS 2 + +struct omap_drm_private { + unsigned int num_crtcs; + struct drm_crtc *crtcs[8]; + unsigned int num_encoders; + struct drm_encoder *encoders[8]; + unsigned int num_connectors; + struct drm_connector *connectors[8]; + + struct drm_fb_helper *fbdev; + + bool has_dmm; +}; + +#ifdef CONFIG_DEBUG_FS +int omap_debugfs_init(struct drm_minor *minor); +void omap_debugfs_cleanup(struct drm_minor *minor); +#endif + +struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev); +void omap_fbdev_free(struct drm_device *dev); + +struct drm_crtc *omap_crtc_init(struct drm_device *dev, + struct omap_overlay *ovl, int id); +struct omap_overlay *omap_crtc_get_overlay(struct drm_crtc *crtc); + +struct drm_encoder *omap_encoder_init(struct drm_device *dev, + struct omap_overlay_manager *mgr); +struct omap_overlay_manager *omap_encoder_get_manager( + struct drm_encoder *encoder); +struct drm_encoder *omap_connector_attached_encoder( + struct drm_connector *connector); +enum drm_connector_status omap_connector_detect( + struct drm_connector *connector, bool force); + +struct drm_connector *omap_connector_init(struct drm_device *dev, + int connector_type, struct omap_dss_device *dssdev); +void omap_connector_mode_set(struct drm_connector *connector, + struct drm_display_mode *mode); +void omap_connector_flush(struct drm_connector *connector, + int x, int y, int w, int h); + +struct drm_framebuffer *omap_framebuffer_create(struct drm_device *dev, + struct drm_file *file, struct drm_mode_fb_cmd *mode_cmd); +struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev, + struct drm_mode_fb_cmd *mode_cmd, struct drm_gem_object *bo); +struct drm_gem_object *omap_framebuffer_bo(struct drm_framebuffer *fb); +int omap_framebuffer_get_buffer(struct drm_framebuffer *fb, int x, int y, + void **vaddr, dma_addr_t *paddr, unsigned int *screen_width); +struct drm_connector *omap_framebuffer_get_next_connector( + struct drm_framebuffer *fb, struct drm_connector *from); +void omap_framebuffer_flush(struct drm_framebuffer *fb, + int x, int y, int w, int h); + +void omap_gem_init(struct drm_device *dev); +void omap_gem_deinit(struct drm_device *dev); + +struct drm_gem_object *omap_gem_new(struct drm_device *dev, + union omap_gem_size gsize, uint32_t flags); +int omap_gem_new_handle(struct drm_device *dev, struct drm_file *file, + union omap_gem_size gsize, uint32_t flags, uint32_t *handle); +void omap_gem_free_object(struct drm_gem_object *obj); +int omap_gem_init_object(struct drm_gem_object *obj); +void *omap_gem_vaddr(struct drm_gem_object *obj); +int omap_gem_dumb_map_offset(struct drm_file *file, struct drm_device *dev, + uint32_t handle, uint64_t *offset); +int omap_gem_dumb_destroy(struct drm_file *file, struct drm_device *dev, + uint32_t handle); +int omap_gem_dumb_create(struct drm_file *file, struct drm_device *dev, + struct drm_mode_create_dumb *args); +int omap_gem_mmap(struct file *filp, struct vm_area_struct *vma); +int omap_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf); +int omap_gem_op_start(struct drm_gem_object *obj, enum omap_gem_op op); +int omap_gem_op_finish(struct drm_gem_object *obj, enum omap_gem_op op); +int omap_gem_op_sync(struct drm_gem_object *obj, enum omap_gem_op op); +int omap_gem_op_async(struct drm_gem_object *obj, enum omap_gem_op op, + void (*fxn)(void *arg), void *arg); +int omap_gem_roll(struct drm_gem_object *obj, uint32_t roll); +int omap_gem_get_paddr(struct drm_gem_object *obj, + dma_addr_t *paddr, bool remap); +int omap_gem_put_paddr(struct drm_gem_object *obj); +uint64_t omap_gem_mmap_offset(struct drm_gem_object *obj); +size_t omap_gem_mmap_size(struct drm_gem_object *obj); + +static inline int align_pitch(int pitch, int width, int bpp) +{ + int bytespp = (bpp + 7) / 8; + /* in case someone tries to feed us a completely bogus stride: */ + pitch = max(pitch, width * bytespp); + /* PVR needs alignment to 8 pixels.. right now that is the most + * restrictive stride requirement.. + */ + return ALIGN(pitch, 8 * bytespp); +} + +#endif /* __OMAP_DRV_H__ */ diff --git a/drivers/staging/omapdrm/omap_encoder.c b/drivers/staging/omapdrm/omap_encoder.c new file mode 100644 index 00000000000..06c52cb62d2 --- /dev/null +++ b/drivers/staging/omapdrm/omap_encoder.c @@ -0,0 +1,171 @@ +/* + * drivers/staging/omapdrm/omap_encoder.c + * + * Copyright (C) 2011 Texas Instruments + * Author: Rob Clark <rob@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "omap_drv.h" + +#include "drm_crtc.h" +#include "drm_crtc_helper.h" + +/* + * encoder funcs + */ + +#define to_omap_encoder(x) container_of(x, struct omap_encoder, base) + +struct omap_encoder { + struct drm_encoder base; + struct omap_overlay_manager *mgr; +}; + +static void omap_encoder_destroy(struct drm_encoder *encoder) +{ + struct omap_encoder *omap_encoder = to_omap_encoder(encoder); + DBG("%s", omap_encoder->mgr->name); + drm_encoder_cleanup(encoder); + kfree(omap_encoder); +} + +static void omap_encoder_dpms(struct drm_encoder *encoder, int mode) +{ + struct omap_encoder *omap_encoder = to_omap_encoder(encoder); + DBG("%s: %d", omap_encoder->mgr->name, mode); +} + +static bool omap_encoder_mode_fixup(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct omap_encoder *omap_encoder = to_omap_encoder(encoder); + DBG("%s", omap_encoder->mgr->name); + return true; +} + +static void omap_encoder_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct omap_encoder *omap_encoder = to_omap_encoder(encoder); + struct drm_device *dev = encoder->dev; + struct omap_drm_private *priv = dev->dev_private; + int i; + + mode = adjusted_mode; + + DBG("%s: set mode: %dx%d", omap_encoder->mgr->name, + mode->hdisplay, mode->vdisplay); + + for (i = 0; i < priv->num_connectors; i++) { + struct drm_connector *connector = priv->connectors[i]; + if (connector->encoder == encoder) { + omap_connector_mode_set(connector, mode); + } + } +} + +static void omap_encoder_prepare(struct drm_encoder *encoder) +{ + struct omap_encoder *omap_encoder = to_omap_encoder(encoder); + struct drm_encoder_helper_funcs *encoder_funcs = + encoder->helper_private; + DBG("%s", omap_encoder->mgr->name); + encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF); +} + +static void omap_encoder_commit(struct drm_encoder *encoder) +{ + struct omap_encoder *omap_encoder = to_omap_encoder(encoder); + struct drm_encoder_helper_funcs *encoder_funcs = + encoder->helper_private; + DBG("%s", omap_encoder->mgr->name); + omap_encoder->mgr->apply(omap_encoder->mgr); + encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); +} + +static const struct drm_encoder_funcs omap_encoder_funcs = { + .destroy = omap_encoder_destroy, +}; + +static const struct drm_encoder_helper_funcs omap_encoder_helper_funcs = { + .dpms = omap_encoder_dpms, + .mode_fixup = omap_encoder_mode_fixup, + .mode_set = omap_encoder_mode_set, + .prepare = omap_encoder_prepare, + .commit = omap_encoder_commit, +}; + +struct omap_overlay_manager *omap_encoder_get_manager( + struct drm_encoder *encoder) +{ + struct omap_encoder *omap_encoder = to_omap_encoder(encoder); + return omap_encoder->mgr; +} + +/* initialize encoder */ +struct drm_encoder *omap_encoder_init(struct drm_device *dev, + struct omap_overlay_manager *mgr) +{ + struct drm_encoder *encoder = NULL; + struct omap_encoder *omap_encoder; + struct omap_overlay_manager_info info; + int ret; + + DBG("%s", mgr->name); + + omap_encoder = kzalloc(sizeof(*omap_encoder), GFP_KERNEL); + if (!omap_encoder) { + dev_err(dev->dev, "could not allocate encoder\n"); + goto fail; + } + + omap_encoder->mgr = mgr; + encoder = &omap_encoder->base; + + drm_encoder_init(dev, encoder, &omap_encoder_funcs, + DRM_MODE_ENCODER_TMDS); + drm_encoder_helper_add(encoder, &omap_encoder_helper_funcs); + + mgr->get_manager_info(mgr, &info); + + /* TODO: fix hard-coded setup.. */ + info.default_color = 0x00000000; + info.trans_key = 0x00000000; + info.trans_key_type = OMAP_DSS_COLOR_KEY_GFX_DST; + info.trans_enabled = false; + + ret = mgr->set_manager_info(mgr, &info); + if (ret) { + dev_err(dev->dev, "could not set manager info\n"); + goto fail; + } + + ret = mgr->apply(mgr); + if (ret) { + dev_err(dev->dev, "could not apply\n"); + goto fail; + } + + return encoder; + +fail: + if (encoder) { + omap_encoder_destroy(encoder); + } + + return NULL; +} diff --git a/drivers/staging/omapdrm/omap_fb.c b/drivers/staging/omapdrm/omap_fb.c new file mode 100644 index 00000000000..0b50c5b3b56 --- /dev/null +++ b/drivers/staging/omapdrm/omap_fb.c @@ -0,0 +1,243 @@ +/* + * drivers/staging/omapdrm/omap_fb.c + * + * Copyright (C) 2011 Texas Instruments + * Author: Rob Clark <rob@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "omap_drv.h" + +#include "drm_crtc.h" +#include "drm_crtc_helper.h" + + +/* + * framebuffer funcs + */ + +#define to_omap_framebuffer(x) container_of(x, struct omap_framebuffer, base) + +struct omap_framebuffer { + struct drm_framebuffer base; + struct drm_gem_object *bo; + int size; + dma_addr_t paddr; +}; + +static int omap_framebuffer_create_handle(struct drm_framebuffer *fb, + struct drm_file *file_priv, + unsigned int *handle) +{ + struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb); + return drm_gem_handle_create(file_priv, omap_fb->bo, handle); +} + +static void omap_framebuffer_destroy(struct drm_framebuffer *fb) +{ + struct drm_device *dev = fb->dev; + struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb); + + DBG("destroy: FB ID: %d (%p)", fb->base.id, fb); + + drm_framebuffer_cleanup(fb); + + if (omap_fb->bo) { + if (omap_fb->paddr && omap_gem_put_paddr(omap_fb->bo)) + dev_err(dev->dev, "could not unmap!\n"); + drm_gem_object_unreference_unlocked(omap_fb->bo); + } + + kfree(omap_fb); +} + +static int omap_framebuffer_dirty(struct drm_framebuffer *fb, + struct drm_file *file_priv, unsigned flags, unsigned color, + struct drm_clip_rect *clips, unsigned num_clips) +{ + int i; + + for (i = 0; i < num_clips; i++) { + omap_framebuffer_flush(fb, clips[i].x1, clips[i].y1, + clips[i].x2 - clips[i].x1, + clips[i].y2 - clips[i].y1); + } + + return 0; +} + +static const struct drm_framebuffer_funcs omap_framebuffer_funcs = { + .create_handle = omap_framebuffer_create_handle, + .destroy = omap_framebuffer_destroy, + .dirty = omap_framebuffer_dirty, +}; + +/* returns the buffer size */ +int omap_framebuffer_get_buffer(struct drm_framebuffer *fb, int x, int y, + void **vaddr, dma_addr_t *paddr, unsigned int *screen_width) +{ + struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb); + int bpp = fb->bits_per_pixel / 8; + unsigned long offset; + + offset = (x * bpp) + (y * fb->pitch); + + if (vaddr) { + void *bo_vaddr = omap_gem_vaddr(omap_fb->bo); + /* note: we can only count on having a vaddr for buffers that + * are allocated physically contiguously to begin with (ie. + * dma_alloc_coherent()). But this should be ok because it + * is only used by legacy fbdev + */ + BUG_ON(IS_ERR_OR_NULL(bo_vaddr)); + *vaddr = bo_vaddr + offset; + } + + *paddr = omap_fb->paddr + offset; + *screen_width = fb->pitch / bpp; + + return omap_fb->size - offset; +} + +struct drm_gem_object *omap_framebuffer_bo(struct drm_framebuffer *fb) +{ + struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb); + return omap_fb->bo; +} + +/* iterate thru all the connectors, returning ones that are attached + * to the same fb.. + */ +struct drm_connector *omap_framebuffer_get_next_connector( + struct drm_framebuffer *fb, struct drm_connector *from) +{ + struct drm_device *dev = fb->dev; + struct list_head *connector_list = &dev->mode_config.connector_list; + struct drm_connector *connector = from; + + if (!from) { + return list_first_entry(connector_list, typeof(*from), head); + } + + list_for_each_entry_from(connector, connector_list, head) { + if (connector != from) { + struct drm_encoder *encoder = connector->encoder; + struct drm_crtc *crtc = encoder ? encoder->crtc : NULL; + if (crtc && crtc->fb == fb) { + return connector; + } + } + } + + return NULL; +} + +/* flush an area of the framebuffer (in case of manual update display that + * is not automatically flushed) + */ +void omap_framebuffer_flush(struct drm_framebuffer *fb, + int x, int y, int w, int h) +{ + struct drm_connector *connector = NULL; + + VERB("flush: %d,%d %dx%d, fb=%p", x, y, w, h, fb); + + while ((connector = omap_framebuffer_get_next_connector(fb, connector))) { + /* only consider connectors that are part of a chain */ + if (connector->encoder && connector->encoder->crtc) { + /* TODO: maybe this should propagate thru the crtc who + * could do the coordinate translation.. + */ + struct drm_crtc *crtc = connector->encoder->crtc; + int cx = max(0, x - crtc->x); + int cy = max(0, y - crtc->y); + int cw = w + (x - crtc->x) - cx; + int ch = h + (y - crtc->y) - cy; + + omap_connector_flush(connector, cx, cy, cw, ch); + } + } +} + +struct drm_framebuffer *omap_framebuffer_create(struct drm_device *dev, + struct drm_file *file, struct drm_mode_fb_cmd *mode_cmd) +{ + struct drm_gem_object *bo; + struct drm_framebuffer *fb; + bo = drm_gem_object_lookup(dev, file, mode_cmd->handle); + if (!bo) { + return ERR_PTR(-ENOENT); + } + fb = omap_framebuffer_init(dev, mode_cmd, bo); + if (!fb) { + return ERR_PTR(-ENOMEM); + } + return fb; +} + +struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev, + struct drm_mode_fb_cmd *mode_cmd, struct drm_gem_object *bo) +{ + struct omap_framebuffer *omap_fb; + struct drm_framebuffer *fb = NULL; + int size, ret; + + DBG("create framebuffer: dev=%p, mode_cmd=%p (%dx%d@%d)", + dev, mode_cmd, mode_cmd->width, mode_cmd->height, + mode_cmd->bpp); + + /* in case someone tries to feed us a completely bogus stride: */ + mode_cmd->pitch = align_pitch(mode_cmd->pitch, + mode_cmd->width, mode_cmd->bpp); + + omap_fb = kzalloc(sizeof(*omap_fb), GFP_KERNEL); + if (!omap_fb) { + dev_err(dev->dev, "could not allocate fb\n"); + goto fail; + } + + fb = &omap_fb->base; + ret = drm_framebuffer_init(dev, fb, &omap_framebuffer_funcs); + if (ret) { + dev_err(dev->dev, "framebuffer init failed: %d\n", ret); + goto fail; + } + + DBG("create: FB ID: %d (%p)", fb->base.id, fb); + + size = PAGE_ALIGN(mode_cmd->pitch * mode_cmd->height); + + if (size > bo->size) { + dev_err(dev->dev, "provided buffer object is too small!\n"); + goto fail; + } + + omap_fb->bo = bo; + omap_fb->size = size; + + if (omap_gem_get_paddr(bo, &omap_fb->paddr, true)) { + dev_err(dev->dev, "could not map (paddr)!\n"); + goto fail; + } + + drm_helper_mode_fill_fb_struct(fb, mode_cmd); + + return fb; + +fail: + if (fb) { + omap_framebuffer_destroy(fb); + } + return NULL; +} diff --git a/drivers/staging/omapdrm/omap_fbdev.c b/drivers/staging/omapdrm/omap_fbdev.c new file mode 100644 index 00000000000..093ae2f87b2 --- /dev/null +++ b/drivers/staging/omapdrm/omap_fbdev.c @@ -0,0 +1,372 @@ +/* + * drivers/staging/omapdrm/omap_fbdev.c + * + * Copyright (C) 2011 Texas Instruments + * Author: Rob Clark <rob@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "omap_drv.h" + +#include "drm_crtc.h" +#include "drm_fb_helper.h" + +MODULE_PARM_DESC(ywrap, "Enable ywrap scrolling (omap44xx and later, default 'y')"); +static bool ywrap_enabled = true; +module_param_named(ywrap, ywrap_enabled, bool, 0644); + +/* + * fbdev funcs, to implement legacy fbdev interface on top of drm driver + */ + +#define to_omap_fbdev(x) container_of(x, struct omap_fbdev, base) + +struct omap_fbdev { + struct drm_fb_helper base; + struct drm_framebuffer *fb; + struct drm_gem_object *bo; + bool ywrap_enabled; +}; + +static void omap_fbdev_flush(struct fb_info *fbi, int x, int y, int w, int h); +static struct drm_fb_helper *get_fb(struct fb_info *fbi); + +static ssize_t omap_fbdev_write(struct fb_info *fbi, const char __user *buf, + size_t count, loff_t *ppos) +{ + ssize_t res; + + res = fb_sys_write(fbi, buf, count, ppos); + omap_fbdev_flush(fbi, 0, 0, fbi->var.xres, fbi->var.yres); + + return res; +} + +static void omap_fbdev_fillrect(struct fb_info *fbi, + const struct fb_fillrect *rect) +{ + sys_fillrect(fbi, rect); + omap_fbdev_flush(fbi, rect->dx, rect->dy, rect->width, rect->height); +} + +static void omap_fbdev_copyarea(struct fb_info *fbi, + const struct fb_copyarea *area) +{ + sys_copyarea(fbi, area); + omap_fbdev_flush(fbi, area->dx, area->dy, area->width, area->height); +} + +static void omap_fbdev_imageblit(struct fb_info *fbi, + const struct fb_image *image) +{ + sys_imageblit(fbi, image); + omap_fbdev_flush(fbi, image->dx, image->dy, + image->width, image->height); +} + +static int omap_fbdev_pan_display(struct fb_var_screeninfo *var, + struct fb_info *fbi) +{ + struct drm_fb_helper *helper = get_fb(fbi); + struct omap_fbdev *fbdev = to_omap_fbdev(helper); + int npages; + + if (!helper) + goto fallback; + + if (!fbdev->ywrap_enabled) + goto fallback; + + /* DMM roll shifts in 4K pages: */ + npages = fbi->fix.line_length >> PAGE_SHIFT; + omap_gem_roll(fbdev->bo, var->yoffset * npages); + + return 0; + +fallback: + return drm_fb_helper_pan_display(var, fbi); +} + +static struct fb_ops omap_fb_ops = { + .owner = THIS_MODULE, + + /* Note: to properly handle manual update displays, we wrap the + * basic fbdev ops which write to the framebuffer + */ + .fb_read = fb_sys_read, + .fb_write = omap_fbdev_write, + .fb_fillrect = omap_fbdev_fillrect, + .fb_copyarea = omap_fbdev_copyarea, + .fb_imageblit = omap_fbdev_imageblit, + + .fb_check_var = drm_fb_helper_check_var, + .fb_set_par = drm_fb_helper_set_par, + .fb_pan_display = omap_fbdev_pan_display, + .fb_blank = drm_fb_helper_blank, + .fb_setcmap = drm_fb_helper_setcmap, + + .fb_debug_enter = drm_fb_helper_debug_enter, + .fb_debug_leave = drm_fb_helper_debug_leave, +}; + +static int omap_fbdev_create(struct drm_fb_helper *helper, + struct drm_fb_helper_surface_size *sizes) +{ + struct omap_fbdev *fbdev = to_omap_fbdev(helper); + struct drm_device *dev = helper->dev; + struct omap_drm_private *priv = dev->dev_private; + struct drm_framebuffer *fb = NULL; + union omap_gem_size gsize; + struct fb_info *fbi = NULL; + struct drm_mode_fb_cmd mode_cmd = {0}; + dma_addr_t paddr; + void __iomem *vaddr; + int size, screen_width; + int ret; + + /* only doing ARGB32 since this is what is needed to alpha-blend + * with video overlays: + */ + sizes->surface_bpp = 32; + sizes->surface_depth = 32; + + DBG("create fbdev: %dx%d@%d (%dx%d)", sizes->surface_width, + sizes->surface_height, sizes->surface_bpp, + sizes->fb_width, sizes->fb_height); + + mode_cmd.width = sizes->surface_width; + mode_cmd.height = sizes->surface_height; + + mode_cmd.bpp = sizes->surface_bpp; + mode_cmd.depth = sizes->surface_depth; + + mode_cmd.pitch = align_pitch( + mode_cmd.width * ((mode_cmd.bpp + 7) / 8), + mode_cmd.width, mode_cmd.bpp); + + fbdev->ywrap_enabled = priv->has_dmm && ywrap_enabled; + if (fbdev->ywrap_enabled) { + /* need to align pitch to page size if using DMM scrolling */ + mode_cmd.pitch = ALIGN(mode_cmd.pitch, PAGE_SIZE); + } + + /* allocate backing bo */ + gsize = (union omap_gem_size){ + .bytes = PAGE_ALIGN(mode_cmd.pitch * mode_cmd.height), + }; + DBG("allocating %d bytes for fb %d", gsize.bytes, dev->primary->index); + fbdev->bo = omap_gem_new(dev, gsize, OMAP_BO_SCANOUT | OMAP_BO_WC); + if (!fbdev->bo) { + dev_err(dev->dev, "failed to allocate buffer object\n"); + goto fail; + } + + fb = omap_framebuffer_init(dev, &mode_cmd, fbdev->bo); + if (!fb) { + dev_err(dev->dev, "failed to allocate fb\n"); + ret = -ENOMEM; + goto fail; + } + + mutex_lock(&dev->struct_mutex); + + fbi = framebuffer_alloc(0, dev->dev); + if (!fbi) { + dev_err(dev->dev, "failed to allocate fb info\n"); + ret = -ENOMEM; + goto fail_unlock; + } + + DBG("fbi=%p, dev=%p", fbi, dev); + + fbdev->fb = fb; + helper->fb = fb; + helper->fbdev = fbi; + + fbi->par = helper; + fbi->flags = FBINFO_DEFAULT; + fbi->fbops = &omap_fb_ops; + + strcpy(fbi->fix.id, MODULE_NAME); + + ret = fb_alloc_cmap(&fbi->cmap, 256, 0); + if (ret) { + ret = -ENOMEM; + goto fail_unlock; + } + + drm_fb_helper_fill_fix(fbi, fb->pitch, fb->depth); + drm_fb_helper_fill_var(fbi, helper, sizes->fb_width, sizes->fb_height); + + size = omap_framebuffer_get_buffer(fb, 0, 0, + &vaddr, &paddr, &screen_width); + + dev->mode_config.fb_base = paddr; + + fbi->screen_base = vaddr; + fbi->screen_size = size; + fbi->fix.smem_start = paddr; + fbi->fix.smem_len = size; + + /* if we have DMM, then we can use it for scrolling by just + * shuffling pages around in DMM rather than doing sw blit. + */ + if (fbdev->ywrap_enabled) { + DRM_INFO("Enabling DMM ywrap scrolling\n"); + fbi->flags |= FBINFO_HWACCEL_YWRAP | FBINFO_READS_FAST; + fbi->fix.ywrapstep = 1; + } + + + DBG("par=%p, %dx%d", fbi->par, fbi->var.xres, fbi->var.yres); + DBG("allocated %dx%d fb", fbdev->fb->width, fbdev->fb->height); + + mutex_unlock(&dev->struct_mutex); + + return 0; + +fail_unlock: + mutex_unlock(&dev->struct_mutex); +fail: + + if (ret) { + if (fbi) + framebuffer_release(fbi); + if (fb) + fb->funcs->destroy(fb); + } + + return ret; +} + +static void omap_crtc_fb_gamma_set(struct drm_crtc *crtc, + u16 red, u16 green, u16 blue, int regno) +{ + DBG("fbdev: set gamma"); +} + +static void omap_crtc_fb_gamma_get(struct drm_crtc *crtc, + u16 *red, u16 *green, u16 *blue, int regno) +{ + DBG("fbdev: get gamma"); +} + +static int omap_fbdev_probe(struct drm_fb_helper *helper, + struct drm_fb_helper_surface_size *sizes) +{ + int new_fb = 0; + int ret; + + if (!helper->fb) { + ret = omap_fbdev_create(helper, sizes); + if (ret) + return ret; + new_fb = 1; + } + return new_fb; +} + +static struct drm_fb_helper_funcs omap_fb_helper_funcs = { + .gamma_set = omap_crtc_fb_gamma_set, + .gamma_get = omap_crtc_fb_gamma_get, + .fb_probe = omap_fbdev_probe, +}; + +static struct drm_fb_helper *get_fb(struct fb_info *fbi) +{ + if (!fbi || strcmp(fbi->fix.id, MODULE_NAME)) { + /* these are not the fb's you're looking for */ + return NULL; + } + return fbi->par; +} + +/* flush an area of the framebuffer (in case of manual update display that + * is not automatically flushed) + */ +static void omap_fbdev_flush(struct fb_info *fbi, int x, int y, int w, int h) +{ + struct drm_fb_helper *helper = get_fb(fbi); + + if (!helper) + return; + + VERB("flush fbdev: %d,%d %dx%d, fbi=%p", x, y, w, h, fbi); + + omap_framebuffer_flush(helper->fb, x, y, w, h); +} + +/* initialize fbdev helper */ +struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev) +{ + struct omap_drm_private *priv = dev->dev_private; + struct omap_fbdev *fbdev = NULL; + struct drm_fb_helper *helper; + int ret = 0; + + fbdev = kzalloc(sizeof(*fbdev), GFP_KERNEL); + if (!fbdev) { + dev_err(dev->dev, "could not allocate fbdev\n"); + goto fail; + } + + helper = &fbdev->base; + + helper->funcs = &omap_fb_helper_funcs; + + ret = drm_fb_helper_init(dev, helper, + priv->num_crtcs, priv->num_connectors); + if (ret) { + dev_err(dev->dev, "could not init fbdev: ret=%d\n", ret); + goto fail; + } + + drm_fb_helper_single_add_all_connectors(helper); + drm_fb_helper_initial_config(helper, 32); + + priv->fbdev = helper; + + return helper; + +fail: + kfree(fbdev); + return NULL; +} + +void omap_fbdev_free(struct drm_device *dev) +{ + struct omap_drm_private *priv = dev->dev_private; + struct drm_fb_helper *helper = priv->fbdev; + struct omap_fbdev *fbdev; + struct fb_info *fbi; + + DBG(); + + fbi = helper->fbdev; + + unregister_framebuffer(fbi); + framebuffer_release(fbi); + + drm_fb_helper_fini(helper); + + fbdev = to_omap_fbdev(priv->fbdev); + + kfree(fbdev); + + /* this will free the backing object */ + if (fbdev->fb) + fbdev->fb->funcs->destroy(fbdev->fb); + + priv->fbdev = NULL; +} diff --git a/drivers/staging/omapdrm/omap_gem.c b/drivers/staging/omapdrm/omap_gem.c new file mode 100644 index 00000000000..e0ebd1d139f --- /dev/null +++ b/drivers/staging/omapdrm/omap_gem.c @@ -0,0 +1,1231 @@ +/* + * drivers/staging/omapdrm/omap_gem.c + * + * Copyright (C) 2011 Texas Instruments + * Author: Rob Clark <rob.clark@linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#include <linux/spinlock.h> +#include <linux/shmem_fs.h> + +#include "omap_drv.h" +#include "omap_dmm_tiler.h" + +/* remove these once drm core helpers are merged */ +struct page ** _drm_gem_get_pages(struct drm_gem_object *obj, gfp_t gfpmask); +void _drm_gem_put_pages(struct drm_gem_object *obj, struct page **pages, + bool dirty, bool accessed); +int _drm_gem_create_mmap_offset_size(struct drm_gem_object *obj, size_t size); + +/* + * GEM buffer object implementation. + */ + +#define to_omap_bo(x) container_of(x, struct omap_gem_object, base) + +/* note: we use upper 8 bits of flags for driver-internal flags: */ +#define OMAP_BO_DMA 0x01000000 /* actually is physically contiguous */ +#define OMAP_BO_EXT_SYNC 0x02000000 /* externally allocated sync object */ +#define OMAP_BO_EXT_MEM 0x04000000 /* externally allocated memory */ + + +struct omap_gem_object { + struct drm_gem_object base; + + uint32_t flags; + + /** width/height for tiled formats (rounded up to slot boundaries) */ + uint16_t width, height; + + /** roll applied when mapping to DMM */ + uint32_t roll; + + /** + * If buffer is allocated physically contiguous, the OMAP_BO_DMA flag + * is set and the paddr is valid. Also if the buffer is remapped in + * TILER and paddr_cnt > 0, then paddr is valid. But if you are using + * the physical address and OMAP_BO_DMA is not set, then you should + * be going thru omap_gem_{get,put}_paddr() to ensure the mapping is + * not removed from under your feet. + * + * Note that OMAP_BO_SCANOUT is a hint from userspace that DMA capable + * buffer is requested, but doesn't mean that it is. Use the + * OMAP_BO_DMA flag to determine if the buffer has a DMA capable + * physical address. + */ + dma_addr_t paddr; + + /** + * # of users of paddr + */ + uint32_t paddr_cnt; + + /** + * tiler block used when buffer is remapped in DMM/TILER. + */ + struct tiler_block *block; + + /** + * Array of backing pages, if allocated. Note that pages are never + * allocated for buffers originally allocated from contiguous memory + */ + struct page **pages; + + /** addresses corresponding to pages in above array */ + dma_addr_t *addrs; + + /** + * Virtual address, if mapped. + */ + void *vaddr; + + /** + * sync-object allocated on demand (if needed) + * + * Per-buffer sync-object for tracking pending and completed hw/dma + * read and write operations. The layout in memory is dictated by + * the SGX firmware, which uses this information to stall the command + * stream if a surface is not ready yet. + * + * Note that when buffer is used by SGX, the sync-object needs to be + * allocated from a special heap of sync-objects. This way many sync + * objects can be packed in a page, and not waste GPU virtual address + * space. Because of this we have to have a omap_gem_set_sync_object() + * API to allow replacement of the syncobj after it has (potentially) + * already been allocated. A bit ugly but I haven't thought of a + * better alternative. + */ + struct { + uint32_t write_pending; + uint32_t write_complete; + uint32_t read_pending; + uint32_t read_complete; + } *sync; +}; + +/* To deal with userspace mmap'ings of 2d tiled buffers, which (a) are + * not necessarily pinned in TILER all the time, and (b) when they are + * they are not necessarily page aligned, we reserve one or more small + * regions in each of the 2d containers to use as a user-GART where we + * can create a second page-aligned mapping of parts of the buffer + * being accessed from userspace. + * + * Note that we could optimize slightly when we know that multiple + * tiler containers are backed by the same PAT.. but I'll leave that + * for later.. + */ +#define NUM_USERGART_ENTRIES 2 +struct usergart_entry { + struct tiler_block *block; /* the reserved tiler block */ + dma_addr_t paddr; + struct drm_gem_object *obj; /* the current pinned obj */ + pgoff_t obj_pgoff; /* page offset of obj currently + mapped in */ +}; +static struct { + struct usergart_entry entry[NUM_USERGART_ENTRIES]; + int height; /* height in rows */ + int height_shift; /* ilog2(height in rows) */ + int slot_shift; /* ilog2(width per slot) */ + int stride_pfn; /* stride in pages */ + int last; /* index of last used entry */ +} *usergart; + +static void evict_entry(struct drm_gem_object *obj, + enum tiler_fmt fmt, struct usergart_entry *entry) +{ + if (obj->dev->dev_mapping) { + size_t size = PAGE_SIZE * usergart[fmt].height; + loff_t off = omap_gem_mmap_offset(obj) + + (entry->obj_pgoff << PAGE_SHIFT); + unmap_mapping_range(obj->dev->dev_mapping, off, size, 1); + } + + entry->obj = NULL; +} + +/* Evict a buffer from usergart, if it is mapped there */ +static void evict(struct drm_gem_object *obj) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + + if (omap_obj->flags & OMAP_BO_TILED) { + enum tiler_fmt fmt = gem2fmt(omap_obj->flags); + int i; + + if (!usergart) + return; + + for (i = 0; i < NUM_USERGART_ENTRIES; i++) { + struct usergart_entry *entry = &usergart[fmt].entry[i]; + if (entry->obj == obj) + evict_entry(obj, fmt, entry); + } + } +} + +/* GEM objects can either be allocated from contiguous memory (in which + * case obj->filp==NULL), or w/ shmem backing (obj->filp!=NULL). But non + * contiguous buffers can be remapped in TILER/DMM if they need to be + * contiguous... but we don't do this all the time to reduce pressure + * on TILER/DMM space when we know at allocation time that the buffer + * will need to be scanned out. + */ +static inline bool is_shmem(struct drm_gem_object *obj) +{ + return obj->filp != NULL; +} + +static int get_pages(struct drm_gem_object *obj, struct page ***pages); + +static DEFINE_SPINLOCK(sync_lock); + +/** ensure backing pages are allocated */ +static int omap_gem_attach_pages(struct drm_gem_object *obj) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + struct page **pages; + + WARN_ON(omap_obj->pages); + + /* TODO: __GFP_DMA32 .. but somehow GFP_HIGHMEM is coming from the + * mapping_gfp_mask(mapping) which conflicts w/ GFP_DMA32.. probably + * we actually want CMA memory for it all anyways.. + */ + pages = _drm_gem_get_pages(obj, GFP_KERNEL); + if (IS_ERR(pages)) { + dev_err(obj->dev->dev, "could not get pages: %ld\n", PTR_ERR(pages)); + return PTR_ERR(pages); + } + + /* for non-cached buffers, ensure the new pages are clean because + * DSS, GPU, etc. are not cache coherent: + */ + if (omap_obj->flags & (OMAP_BO_WC|OMAP_BO_UNCACHED)) { + int i, npages = obj->size >> PAGE_SHIFT; + dma_addr_t *addrs = kmalloc(npages * sizeof(addrs), GFP_KERNEL); + for (i = 0; i < npages; i++) { + addrs[i] = dma_map_page(obj->dev->dev, pages[i], + 0, PAGE_SIZE, DMA_BIDIRECTIONAL); + } + omap_obj->addrs = addrs; + } + + omap_obj->pages = pages; + return 0; +} + +/** release backing pages */ +static void omap_gem_detach_pages(struct drm_gem_object *obj) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + + /* for non-cached buffers, ensure the new pages are clean because + * DSS, GPU, etc. are not cache coherent: + */ + if (omap_obj->flags & (OMAP_BO_WC|OMAP_BO_UNCACHED)) { + int i, npages = obj->size >> PAGE_SHIFT; + for (i = 0; i < npages; i++) { + dma_unmap_page(obj->dev->dev, omap_obj->addrs[i], + PAGE_SIZE, DMA_BIDIRECTIONAL); + } + kfree(omap_obj->addrs); + omap_obj->addrs = NULL; + } + + _drm_gem_put_pages(obj, omap_obj->pages, true, false); + omap_obj->pages = NULL; +} + +/** get mmap offset */ +uint64_t omap_gem_mmap_offset(struct drm_gem_object *obj) +{ + if (!obj->map_list.map) { + /* Make it mmapable */ + size_t size = omap_gem_mmap_size(obj); + int ret = _drm_gem_create_mmap_offset_size(obj, size); + + if (ret) { + dev_err(obj->dev->dev, "could not allocate mmap offset"); + return 0; + } + } + + return (uint64_t)obj->map_list.hash.key << PAGE_SHIFT; +} + +/** get mmap size */ +size_t omap_gem_mmap_size(struct drm_gem_object *obj) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + size_t size = obj->size; + + if (omap_obj->flags & OMAP_BO_TILED) { + /* for tiled buffers, the virtual size has stride rounded up + * to 4kb.. (to hide the fact that row n+1 might start 16kb or + * 32kb later!). But we don't back the entire buffer with + * pages, only the valid picture part.. so need to adjust for + * this in the size used to mmap and generate mmap offset + */ + size = tiler_vsize(gem2fmt(omap_obj->flags), + omap_obj->width, omap_obj->height); + } + + return size; +} + + +/* Normal handling for the case of faulting in non-tiled buffers */ +static int fault_1d(struct drm_gem_object *obj, + struct vm_area_struct *vma, struct vm_fault *vmf) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + unsigned long pfn; + pgoff_t pgoff; + + /* We don't use vmf->pgoff since that has the fake offset: */ + pgoff = ((unsigned long)vmf->virtual_address - + vma->vm_start) >> PAGE_SHIFT; + + if (omap_obj->pages) { + pfn = page_to_pfn(omap_obj->pages[pgoff]); + } else { + BUG_ON(!(omap_obj->flags & OMAP_BO_DMA)); + pfn = (omap_obj->paddr >> PAGE_SHIFT) + pgoff; + } + + VERB("Inserting %p pfn %lx, pa %lx", vmf->virtual_address, + pfn, pfn << PAGE_SHIFT); + + return vm_insert_mixed(vma, (unsigned long)vmf->virtual_address, pfn); +} + +/* Special handling for the case of faulting in 2d tiled buffers */ +static int fault_2d(struct drm_gem_object *obj, + struct vm_area_struct *vma, struct vm_fault *vmf) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + struct usergart_entry *entry; + enum tiler_fmt fmt = gem2fmt(omap_obj->flags); + struct page *pages[64]; /* XXX is this too much to have on stack? */ + unsigned long pfn; + pgoff_t pgoff, base_pgoff; + void __user *vaddr; + int i, ret, slots; + + if (!usergart) + return -EFAULT; + + /* TODO: this fxn might need a bit tweaking to deal w/ tiled buffers + * that are wider than 4kb + */ + + /* We don't use vmf->pgoff since that has the fake offset: */ + pgoff = ((unsigned long)vmf->virtual_address - + vma->vm_start) >> PAGE_SHIFT; + + /* actual address we start mapping at is rounded down to previous slot + * boundary in the y direction: + */ + base_pgoff = round_down(pgoff, usergart[fmt].height); + vaddr = vmf->virtual_address - ((pgoff - base_pgoff) << PAGE_SHIFT); + entry = &usergart[fmt].entry[usergart[fmt].last]; + + slots = omap_obj->width >> usergart[fmt].slot_shift; + + /* evict previous buffer using this usergart entry, if any: */ + if (entry->obj) + evict_entry(entry->obj, fmt, entry); + + entry->obj = obj; + entry->obj_pgoff = base_pgoff; + + /* now convert base_pgoff to phys offset from virt offset: + */ + base_pgoff = (base_pgoff >> usergart[fmt].height_shift) * slots; + + /* map in pages. Note the height of the slot is also equal to the + * number of pages that need to be mapped in to fill 4kb wide CPU page. + * If the height is 64, then 64 pages fill a 4kb wide by 64 row region. + * Beyond the valid pixel part of the buffer, we set pages[i] to NULL to + * get a dummy page mapped in.. if someone reads/writes it they will get + * random/undefined content, but at least it won't be corrupting + * whatever other random page used to be mapped in, or other undefined + * behavior. + */ + memcpy(pages, &omap_obj->pages[base_pgoff], + sizeof(struct page *) * slots); + memset(pages + slots, 0, + sizeof(struct page *) * (usergart[fmt].height - slots)); + + ret = tiler_pin(entry->block, pages, ARRAY_SIZE(pages), 0, true); + if (ret) { + dev_err(obj->dev->dev, "failed to pin: %d\n", ret); + return ret; + } + + i = usergart[fmt].height; + pfn = entry->paddr >> PAGE_SHIFT; + + VERB("Inserting %p pfn %lx, pa %lx", vmf->virtual_address, + pfn, pfn << PAGE_SHIFT); + + while (i--) { + vm_insert_mixed(vma, (unsigned long)vaddr, pfn); + pfn += usergart[fmt].stride_pfn; + vaddr += PAGE_SIZE; + } + + /* simple round-robin: */ + usergart[fmt].last = (usergart[fmt].last + 1) % NUM_USERGART_ENTRIES; + + return 0; +} + +/** + * omap_gem_fault - pagefault handler for GEM objects + * @vma: the VMA of the GEM object + * @vmf: fault detail + * + * Invoked when a fault occurs on an mmap of a GEM managed area. GEM + * does most of the work for us including the actual map/unmap calls + * but we need to do the actual page work. + * + * The VMA was set up by GEM. In doing so it also ensured that the + * vma->vm_private_data points to the GEM object that is backing this + * mapping. + */ +int omap_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) +{ + struct drm_gem_object *obj = vma->vm_private_data; + struct omap_gem_object *omap_obj = to_omap_bo(obj); + struct drm_device *dev = obj->dev; + struct page **pages; + int ret; + + /* Make sure we don't parallel update on a fault, nor move or remove + * something from beneath our feet + */ + mutex_lock(&dev->struct_mutex); + + /* if a shmem backed object, make sure we have pages attached now */ + ret = get_pages(obj, &pages); + if (ret) { + goto fail; + } + + /* where should we do corresponding put_pages().. we are mapping + * the original page, rather than thru a GART, so we can't rely + * on eviction to trigger this. But munmap() or all mappings should + * probably trigger put_pages()? + */ + + if (omap_obj->flags & OMAP_BO_TILED) + ret = fault_2d(obj, vma, vmf); + else + ret = fault_1d(obj, vma, vmf); + + +fail: + mutex_unlock(&dev->struct_mutex); + switch (ret) { + case 0: + case -ERESTARTSYS: + case -EINTR: + return VM_FAULT_NOPAGE; + case -ENOMEM: + return VM_FAULT_OOM; + default: + return VM_FAULT_SIGBUS; + } +} + +/** We override mainly to fix up some of the vm mapping flags.. */ +int omap_gem_mmap(struct file *filp, struct vm_area_struct *vma) +{ + struct omap_gem_object *omap_obj; + int ret; + + ret = drm_gem_mmap(filp, vma); + if (ret) { + DBG("mmap failed: %d", ret); + return ret; + } + + /* after drm_gem_mmap(), it is safe to access the obj */ + omap_obj = to_omap_bo(vma->vm_private_data); + + vma->vm_flags &= ~VM_PFNMAP; + vma->vm_flags |= VM_MIXEDMAP; + + if (omap_obj->flags & OMAP_BO_WC) { + vma->vm_page_prot = pgprot_writecombine(vm_get_page_prot(vma->vm_flags)); + } else if (omap_obj->flags & OMAP_BO_UNCACHED) { + vma->vm_page_prot = pgprot_noncached(vm_get_page_prot(vma->vm_flags)); + } else { + vma->vm_page_prot = vm_get_page_prot(vma->vm_flags); + } + + return ret; +} + +/** + * omap_gem_dumb_create - create a dumb buffer + * @drm_file: our client file + * @dev: our device + * @args: the requested arguments copied from userspace + * + * Allocate a buffer suitable for use for a frame buffer of the + * form described by user space. Give userspace a handle by which + * to reference it. + */ +int omap_gem_dumb_create(struct drm_file *file, struct drm_device *dev, + struct drm_mode_create_dumb *args) +{ + union omap_gem_size gsize; + + /* in case someone tries to feed us a completely bogus stride: */ + args->pitch = align_pitch(args->pitch, args->width, args->bpp); + args->size = PAGE_ALIGN(args->pitch * args->height); + + gsize = (union omap_gem_size){ + .bytes = args->size, + }; + + return omap_gem_new_handle(dev, file, gsize, + OMAP_BO_SCANOUT | OMAP_BO_WC, &args->handle); +} + +/** + * omap_gem_dumb_destroy - destroy a dumb buffer + * @file: client file + * @dev: our DRM device + * @handle: the object handle + * + * Destroy a handle that was created via omap_gem_dumb_create. + */ +int omap_gem_dumb_destroy(struct drm_file *file, struct drm_device *dev, + uint32_t handle) +{ + /* No special work needed, drop the reference and see what falls out */ + return drm_gem_handle_delete(file, handle); +} + +/** + * omap_gem_dumb_map - buffer mapping for dumb interface + * @file: our drm client file + * @dev: drm device + * @handle: GEM handle to the object (from dumb_create) + * + * Do the necessary setup to allow the mapping of the frame buffer + * into user memory. We don't have to do much here at the moment. + */ +int omap_gem_dumb_map_offset(struct drm_file *file, struct drm_device *dev, + uint32_t handle, uint64_t *offset) +{ + struct drm_gem_object *obj; + int ret = 0; + + /* GEM does all our handle to object mapping */ + obj = drm_gem_object_lookup(dev, file, handle); + if (obj == NULL) { + ret = -ENOENT; + goto fail; + } + + *offset = omap_gem_mmap_offset(obj); + + drm_gem_object_unreference_unlocked(obj); + +fail: + return ret; +} + +/* Set scrolling position. This allows us to implement fast scrolling + * for console. + */ +int omap_gem_roll(struct drm_gem_object *obj, uint32_t roll) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + uint32_t npages = obj->size >> PAGE_SHIFT; + int ret = 0; + + if (roll > npages) { + dev_err(obj->dev->dev, "invalid roll: %d\n", roll); + return -EINVAL; + } + + omap_obj->roll = roll; + + if (in_atomic() || mutex_is_locked(&obj->dev->struct_mutex)) { + /* this can get called from fbcon in atomic context.. so + * just ignore it and wait for next time called from + * interruptible context to update the PAT.. the result + * may be that user sees wrap-around instead of scrolling + * momentarily on the screen. If we wanted to be fancier + * we could perhaps schedule some workqueue work at this + * point. + */ + return 0; + } + + mutex_lock(&obj->dev->struct_mutex); + + /* if we aren't mapped yet, we don't need to do anything */ + if (omap_obj->block) { + struct page **pages; + ret = get_pages(obj, &pages); + if (ret) + goto fail; + ret = tiler_pin(omap_obj->block, pages, npages, roll, true); + if (ret) + dev_err(obj->dev->dev, "could not repin: %d\n", ret); + } + +fail: + mutex_unlock(&obj->dev->struct_mutex); + + return ret; +} + +/* Get physical address for DMA.. if 'remap' is true, and the buffer is not + * already contiguous, remap it to pin in physically contiguous memory.. (ie. + * map in TILER) + */ +int omap_gem_get_paddr(struct drm_gem_object *obj, + dma_addr_t *paddr, bool remap) +{ + struct omap_drm_private *priv = obj->dev->dev_private; + struct omap_gem_object *omap_obj = to_omap_bo(obj); + int ret = 0; + + mutex_lock(&obj->dev->struct_mutex); + + if (remap && is_shmem(obj) && priv->has_dmm) { + if (omap_obj->paddr_cnt == 0) { + struct page **pages; + uint32_t npages = obj->size >> PAGE_SHIFT; + enum tiler_fmt fmt = gem2fmt(omap_obj->flags); + struct tiler_block *block; + + BUG_ON(omap_obj->block); + + ret = get_pages(obj, &pages); + if (ret) + goto fail; + + if (omap_obj->flags & OMAP_BO_TILED) { + block = tiler_reserve_2d(fmt, + omap_obj->width, + omap_obj->height, 0); + } else { + block = tiler_reserve_1d(obj->size); + } + + if (IS_ERR(block)) { + ret = PTR_ERR(block); + dev_err(obj->dev->dev, + "could not remap: %d (%d)\n", ret, fmt); + goto fail; + } + + /* TODO: enable async refill.. */ + ret = tiler_pin(block, pages, npages, + omap_obj->roll, true); + if (ret) { + tiler_release(block); + dev_err(obj->dev->dev, + "could not pin: %d\n", ret); + goto fail; + } + + omap_obj->paddr = tiler_ssptr(block); + omap_obj->block = block; + + DBG("got paddr: %08x", omap_obj->paddr); + } + + omap_obj->paddr_cnt++; + + *paddr = omap_obj->paddr; + } else if (omap_obj->flags & OMAP_BO_DMA) { + *paddr = omap_obj->paddr; + } else { + ret = -EINVAL; + } + +fail: + mutex_unlock(&obj->dev->struct_mutex); + + return ret; +} + +/* Release physical address, when DMA is no longer being performed.. this + * could potentially unpin and unmap buffers from TILER + */ +int omap_gem_put_paddr(struct drm_gem_object *obj) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + int ret = 0; + + mutex_lock(&obj->dev->struct_mutex); + if (omap_obj->paddr_cnt > 0) { + omap_obj->paddr_cnt--; + if (omap_obj->paddr_cnt == 0) { + ret = tiler_unpin(omap_obj->block); + if (ret) { + dev_err(obj->dev->dev, + "could not unpin pages: %d\n", ret); + goto fail; + } + ret = tiler_release(omap_obj->block); + if (ret) { + dev_err(obj->dev->dev, + "could not release unmap: %d\n", ret); + } + omap_obj->block = NULL; + } + } +fail: + mutex_unlock(&obj->dev->struct_mutex); + return ret; +} + +/* acquire pages when needed (for example, for DMA where physically + * contiguous buffer is not required + */ +static int get_pages(struct drm_gem_object *obj, struct page ***pages) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + int ret = 0; + + if (is_shmem(obj) && !omap_obj->pages) { + ret = omap_gem_attach_pages(obj); + if (ret) { + dev_err(obj->dev->dev, "could not attach pages\n"); + return ret; + } + } + + /* TODO: even phys-contig.. we should have a list of pages? */ + *pages = omap_obj->pages; + + return 0; +} + +int omap_gem_get_pages(struct drm_gem_object *obj, struct page ***pages) +{ + int ret; + mutex_lock(&obj->dev->struct_mutex); + ret = get_pages(obj, pages); + mutex_unlock(&obj->dev->struct_mutex); + return ret; +} + +/* release pages when DMA no longer being performed */ +int omap_gem_put_pages(struct drm_gem_object *obj) +{ + /* do something here if we dynamically attach/detach pages.. at + * least they would no longer need to be pinned if everyone has + * released the pages.. + */ + return 0; +} + +/* Get kernel virtual address for CPU access.. this more or less only + * exists for omap_fbdev. This should be called with struct_mutex + * held. + */ +void *omap_gem_vaddr(struct drm_gem_object *obj) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + WARN_ON(! mutex_is_locked(&obj->dev->struct_mutex)); + if (!omap_obj->vaddr) { + struct page **pages; + int ret = get_pages(obj, &pages); + if (ret) + return ERR_PTR(ret); + omap_obj->vaddr = vmap(pages, obj->size >> PAGE_SHIFT, + VM_MAP, pgprot_writecombine(PAGE_KERNEL)); + } + return omap_obj->vaddr; +} + +/* Buffer Synchronization: + */ + +struct omap_gem_sync_waiter { + struct list_head list; + struct omap_gem_object *omap_obj; + enum omap_gem_op op; + uint32_t read_target, write_target; + /* notify called w/ sync_lock held */ + void (*notify)(void *arg); + void *arg; +}; + +/* list of omap_gem_sync_waiter.. the notify fxn gets called back when + * the read and/or write target count is achieved which can call a user + * callback (ex. to kick 3d and/or 2d), wakeup blocked task (prep for + * cpu access), etc. + */ +static LIST_HEAD(waiters); + +static inline bool is_waiting(struct omap_gem_sync_waiter *waiter) +{ + struct omap_gem_object *omap_obj = waiter->omap_obj; + if ((waiter->op & OMAP_GEM_READ) && + (omap_obj->sync->read_complete < waiter->read_target)) + return true; + if ((waiter->op & OMAP_GEM_WRITE) && + (omap_obj->sync->write_complete < waiter->write_target)) + return true; + return false; +} + +/* macro for sync debug.. */ +#define SYNCDBG 0 +#define SYNC(fmt, ...) do { if (SYNCDBG) \ + printk(KERN_ERR "%s:%d: "fmt"\n", \ + __func__, __LINE__, ##__VA_ARGS__); \ + } while (0) + + +static void sync_op_update(void) +{ + struct omap_gem_sync_waiter *waiter, *n; + list_for_each_entry_safe(waiter, n, &waiters, list) { + if (!is_waiting(waiter)) { + list_del(&waiter->list); + SYNC("notify: %p", waiter); + waiter->notify(waiter->arg); + kfree(waiter); + } + } +} + +static inline int sync_op(struct drm_gem_object *obj, + enum omap_gem_op op, bool start) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + int ret = 0; + + spin_lock(&sync_lock); + + if (!omap_obj->sync) { + omap_obj->sync = kzalloc(sizeof(*omap_obj->sync), GFP_ATOMIC); + if (!omap_obj->sync) { + ret = -ENOMEM; + goto unlock; + } + } + + if (start) { + if (op & OMAP_GEM_READ) + omap_obj->sync->read_pending++; + if (op & OMAP_GEM_WRITE) + omap_obj->sync->write_pending++; + } else { + if (op & OMAP_GEM_READ) + omap_obj->sync->read_complete++; + if (op & OMAP_GEM_WRITE) + omap_obj->sync->write_complete++; + sync_op_update(); + } + +unlock: + spin_unlock(&sync_lock); + + return ret; +} + +/* it is a bit lame to handle updates in this sort of polling way, but + * in case of PVR, the GPU can directly update read/write complete + * values, and not really tell us which ones it updated.. this also + * means that sync_lock is not quite sufficient. So we'll need to + * do something a bit better when it comes time to add support for + * separate 2d hw.. + */ +void omap_gem_op_update(void) +{ + spin_lock(&sync_lock); + sync_op_update(); + spin_unlock(&sync_lock); +} + +/* mark the start of read and/or write operation */ +int omap_gem_op_start(struct drm_gem_object *obj, enum omap_gem_op op) +{ + return sync_op(obj, op, true); +} + +int omap_gem_op_finish(struct drm_gem_object *obj, enum omap_gem_op op) +{ + return sync_op(obj, op, false); +} + +static DECLARE_WAIT_QUEUE_HEAD(sync_event); + +static void sync_notify(void *arg) +{ + struct task_struct **waiter_task = arg; + *waiter_task = NULL; + wake_up_all(&sync_event); +} + +int omap_gem_op_sync(struct drm_gem_object *obj, enum omap_gem_op op) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + int ret = 0; + if (omap_obj->sync) { + struct task_struct *waiter_task = current; + struct omap_gem_sync_waiter *waiter = + kzalloc(sizeof(*waiter), GFP_KERNEL); + + if (!waiter) { + return -ENOMEM; + } + + waiter->omap_obj = omap_obj; + waiter->op = op; + waiter->read_target = omap_obj->sync->read_pending; + waiter->write_target = omap_obj->sync->write_pending; + waiter->notify = sync_notify; + waiter->arg = &waiter_task; + + spin_lock(&sync_lock); + if (is_waiting(waiter)) { + SYNC("waited: %p", waiter); + list_add_tail(&waiter->list, &waiters); + spin_unlock(&sync_lock); + ret = wait_event_interruptible(sync_event, + (waiter_task == NULL)); + spin_lock(&sync_lock); + if (waiter_task) { + SYNC("interrupted: %p", waiter); + /* we were interrupted */ + list_del(&waiter->list); + waiter_task = NULL; + } else { + /* freed in sync_op_update() */ + waiter = NULL; + } + } + spin_unlock(&sync_lock); + + if (waiter) { + kfree(waiter); + } + } + return ret; +} + +/* call fxn(arg), either synchronously or asynchronously if the op + * is currently blocked.. fxn() can be called from any context + * + * (TODO for now fxn is called back from whichever context calls + * omap_gem_op_update().. but this could be better defined later + * if needed) + * + * TODO more code in common w/ _sync().. + */ +int omap_gem_op_async(struct drm_gem_object *obj, enum omap_gem_op op, + void (*fxn)(void *arg), void *arg) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + if (omap_obj->sync) { + struct omap_gem_sync_waiter *waiter = + kzalloc(sizeof(*waiter), GFP_ATOMIC); + + if (!waiter) { + return -ENOMEM; + } + + waiter->omap_obj = omap_obj; + waiter->op = op; + waiter->read_target = omap_obj->sync->read_pending; + waiter->write_target = omap_obj->sync->write_pending; + waiter->notify = fxn; + waiter->arg = arg; + + spin_lock(&sync_lock); + if (is_waiting(waiter)) { + SYNC("waited: %p", waiter); + list_add_tail(&waiter->list, &waiters); + spin_unlock(&sync_lock); + return 0; + } + + spin_unlock(&sync_lock); + } + + /* no waiting.. */ + fxn(arg); + + return 0; +} + +/* special API so PVR can update the buffer to use a sync-object allocated + * from it's sync-obj heap. Only used for a newly allocated (from PVR's + * perspective) sync-object, so we overwrite the new syncobj w/ values + * from the already allocated syncobj (if there is one) + */ +int omap_gem_set_sync_object(struct drm_gem_object *obj, void *syncobj) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + int ret = 0; + + spin_lock(&sync_lock); + + if ((omap_obj->flags & OMAP_BO_EXT_SYNC) && !syncobj) { + /* clearing a previously set syncobj */ + syncobj = kzalloc(sizeof(*omap_obj->sync), GFP_ATOMIC); + if (!syncobj) { + ret = -ENOMEM; + goto unlock; + } + memcpy(syncobj, omap_obj->sync, sizeof(*omap_obj->sync)); + omap_obj->flags &= ~OMAP_BO_EXT_SYNC; + omap_obj->sync = syncobj; + } else if (syncobj && !(omap_obj->flags & OMAP_BO_EXT_SYNC)) { + /* replacing an existing syncobj */ + if (omap_obj->sync) { + memcpy(syncobj, omap_obj->sync, sizeof(*omap_obj->sync)); + kfree(omap_obj->sync); + } + omap_obj->flags |= OMAP_BO_EXT_SYNC; + omap_obj->sync = syncobj; + } + +unlock: + spin_unlock(&sync_lock); + return ret; +} + +int omap_gem_init_object(struct drm_gem_object *obj) +{ + return -EINVAL; /* unused */ +} + +/* don't call directly.. called from GEM core when it is time to actually + * free the object.. + */ +void omap_gem_free_object(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + struct omap_gem_object *omap_obj = to_omap_bo(obj); + + evict(obj); + + if (obj->map_list.map) { + drm_gem_free_mmap_offset(obj); + } + + /* don't free externally allocated backing memory */ + if (!(omap_obj->flags & OMAP_BO_EXT_MEM)) { + if (omap_obj->pages) { + omap_gem_detach_pages(obj); + } + if (!is_shmem(obj)) { + dma_free_writecombine(dev->dev, obj->size, + omap_obj->vaddr, omap_obj->paddr); + } else if (omap_obj->vaddr) { + vunmap(omap_obj->vaddr); + } + } + + /* don't free externally allocated syncobj */ + if (!(omap_obj->flags & OMAP_BO_EXT_SYNC)) { + kfree(omap_obj->sync); + } + + drm_gem_object_release(obj); + + kfree(obj); +} + +/* convenience method to construct a GEM buffer object, and userspace handle */ +int omap_gem_new_handle(struct drm_device *dev, struct drm_file *file, + union omap_gem_size gsize, uint32_t flags, uint32_t *handle) +{ + struct drm_gem_object *obj; + int ret; + + obj = omap_gem_new(dev, gsize, flags); + if (!obj) + return -ENOMEM; + + ret = drm_gem_handle_create(file, obj, handle); + if (ret) { + drm_gem_object_release(obj); + kfree(obj); /* TODO isn't there a dtor to call? just copying i915 */ + return ret; + } + + /* drop reference from allocate - handle holds it now */ + drm_gem_object_unreference_unlocked(obj); + + return 0; +} + +/* GEM buffer object constructor */ +struct drm_gem_object *omap_gem_new(struct drm_device *dev, + union omap_gem_size gsize, uint32_t flags) +{ + struct omap_drm_private *priv = dev->dev_private; + struct omap_gem_object *omap_obj; + struct drm_gem_object *obj = NULL; + size_t size; + int ret; + + if (flags & OMAP_BO_TILED) { + if (!usergart) { + dev_err(dev->dev, "Tiled buffers require DMM\n"); + goto fail; + } + + /* tiled buffers are always shmem paged backed.. when they are + * scanned out, they are remapped into DMM/TILER + */ + flags &= ~OMAP_BO_SCANOUT; + + /* currently don't allow cached buffers.. there is some caching + * stuff that needs to be handled better + */ + flags &= ~(OMAP_BO_CACHED|OMAP_BO_UNCACHED); + flags |= OMAP_BO_WC; + + /* align dimensions to slot boundaries... */ + tiler_align(gem2fmt(flags), + &gsize.tiled.width, &gsize.tiled.height); + + /* ...and calculate size based on aligned dimensions */ + size = tiler_size(gem2fmt(flags), + gsize.tiled.width, gsize.tiled.height); + } else { + size = PAGE_ALIGN(gsize.bytes); + } + + omap_obj = kzalloc(sizeof(*omap_obj), GFP_KERNEL); + if (!omap_obj) { + dev_err(dev->dev, "could not allocate GEM object\n"); + goto fail; + } + + obj = &omap_obj->base; + + if ((flags & OMAP_BO_SCANOUT) && !priv->has_dmm) { + /* attempt to allocate contiguous memory if we don't + * have DMM for remappign discontiguous buffers + */ + omap_obj->vaddr = dma_alloc_writecombine(dev->dev, size, + &omap_obj->paddr, GFP_KERNEL); + if (omap_obj->vaddr) { + flags |= OMAP_BO_DMA; + } + } + + omap_obj->flags = flags; + + if (flags & OMAP_BO_TILED) { + omap_obj->width = gsize.tiled.width; + omap_obj->height = gsize.tiled.height; + } + + if (flags & (OMAP_BO_DMA|OMAP_BO_EXT_MEM)) { + ret = drm_gem_private_object_init(dev, obj, size); + } else { + ret = drm_gem_object_init(dev, obj, size); + } + + if (ret) { + goto fail; + } + + return obj; + +fail: + if (obj) { + omap_gem_free_object(obj); + } + return NULL; +} + +/* init/cleanup.. if DMM is used, we need to set some stuff up.. */ +void omap_gem_init(struct drm_device *dev) +{ + struct omap_drm_private *priv = dev->dev_private; + const enum tiler_fmt fmts[] = { + TILFMT_8BIT, TILFMT_16BIT, TILFMT_32BIT + }; + int i, j, ret; + + ret = omap_dmm_init(dev); + if (ret) { + /* DMM only supported on OMAP4 and later, so this isn't fatal */ + dev_warn(dev->dev, "omap_dmm_init failed, disabling DMM\n"); + return; + } + + usergart = kzalloc(3 * sizeof(*usergart), GFP_KERNEL); + if (!usergart) { + dev_warn(dev->dev, "could not allocate usergart\n"); + return; + } + + /* reserve 4k aligned/wide regions for userspace mappings: */ + for (i = 0; i < ARRAY_SIZE(fmts); i++) { + uint16_t h = 1, w = PAGE_SIZE >> i; + tiler_align(fmts[i], &w, &h); + /* note: since each region is 1 4kb page wide, and minimum + * number of rows, the height ends up being the same as the + * # of pages in the region + */ + usergart[i].height = h; + usergart[i].height_shift = ilog2(h); + usergart[i].stride_pfn = tiler_stride(fmts[i]) >> PAGE_SHIFT; + usergart[i].slot_shift = ilog2((PAGE_SIZE / h) >> i); + for (j = 0; j < NUM_USERGART_ENTRIES; j++) { + struct usergart_entry *entry = &usergart[i].entry[j]; + struct tiler_block *block = + tiler_reserve_2d(fmts[i], w, h, + PAGE_SIZE); + if (IS_ERR(block)) { + dev_err(dev->dev, + "reserve failed: %d, %d, %ld\n", + i, j, PTR_ERR(block)); + return; + } + entry->paddr = tiler_ssptr(block); + entry->block = block; + + DBG("%d:%d: %dx%d: paddr=%08x stride=%d", i, j, w, h, + entry->paddr, + usergart[i].stride_pfn << PAGE_SHIFT); + } + } + + priv->has_dmm = true; +} + +void omap_gem_deinit(struct drm_device *dev) +{ + /* I believe we can rely on there being no more outstanding GEM + * objects which could depend on usergart/dmm at this point. + */ + omap_dmm_remove(); + kfree(usergart); +} diff --git a/drivers/staging/omapdrm/omap_gem_helpers.c b/drivers/staging/omapdrm/omap_gem_helpers.c new file mode 100644 index 00000000000..29275c7209e --- /dev/null +++ b/drivers/staging/omapdrm/omap_gem_helpers.c @@ -0,0 +1,169 @@ +/* + * drivers/staging/omapdrm/omap_gem_helpers.c + * + * Copyright (C) 2011 Texas Instruments + * Author: Rob Clark <rob.clark@linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* temporary copy of drm_gem_{get,put}_pages() until the + * "drm/gem: add functions to get/put pages" patch is merged.. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/shmem_fs.h> + +#include <drm/drmP.h> + +/** + * drm_gem_get_pages - helper to allocate backing pages for a GEM object + * @obj: obj in question + * @gfpmask: gfp mask of requested pages + */ +struct page ** _drm_gem_get_pages(struct drm_gem_object *obj, gfp_t gfpmask) +{ + struct inode *inode; + struct address_space *mapping; + struct page *p, **pages; + int i, npages; + + /* This is the shared memory object that backs the GEM resource */ + inode = obj->filp->f_path.dentry->d_inode; + mapping = inode->i_mapping; + + npages = obj->size >> PAGE_SHIFT; + + pages = drm_malloc_ab(npages, sizeof(struct page *)); + if (pages == NULL) + return ERR_PTR(-ENOMEM); + + gfpmask |= mapping_gfp_mask(mapping); + + for (i = 0; i < npages; i++) { + p = shmem_read_mapping_page_gfp(mapping, i, gfpmask); + if (IS_ERR(p)) + goto fail; + pages[i] = p; + + /* There is a hypothetical issue w/ drivers that require + * buffer memory in the low 4GB.. if the pages are un- + * pinned, and swapped out, they can end up swapped back + * in above 4GB. If pages are already in memory, then + * shmem_read_mapping_page_gfp will ignore the gfpmask, + * even if the already in-memory page disobeys the mask. + * + * It is only a theoretical issue today, because none of + * the devices with this limitation can be populated with + * enough memory to trigger the issue. But this BUG_ON() + * is here as a reminder in case the problem with + * shmem_read_mapping_page_gfp() isn't solved by the time + * it does become a real issue. + * + * See this thread: http://lkml.org/lkml/2011/7/11/238 + */ + BUG_ON((gfpmask & __GFP_DMA32) && + (page_to_pfn(p) >= 0x00100000UL)); + } + + return pages; + +fail: + while (i--) { + page_cache_release(pages[i]); + } + drm_free_large(pages); + return ERR_PTR(PTR_ERR(p)); +} + +/** + * drm_gem_put_pages - helper to free backing pages for a GEM object + * @obj: obj in question + * @pages: pages to free + */ +void _drm_gem_put_pages(struct drm_gem_object *obj, struct page **pages, + bool dirty, bool accessed) +{ + int i, npages; + + npages = obj->size >> PAGE_SHIFT; + + for (i = 0; i < npages; i++) { + if (dirty) + set_page_dirty(pages[i]); + + if (accessed) + mark_page_accessed(pages[i]); + + /* Undo the reference we took when populating the table */ + page_cache_release(pages[i]); + } + + drm_free_large(pages); +} + +int +_drm_gem_create_mmap_offset_size(struct drm_gem_object *obj, size_t size) +{ + struct drm_device *dev = obj->dev; + struct drm_gem_mm *mm = dev->mm_private; + struct drm_map_list *list; + struct drm_local_map *map; + int ret = 0; + + /* Set the object up for mmap'ing */ + list = &obj->map_list; + list->map = kzalloc(sizeof(struct drm_map_list), GFP_KERNEL); + if (!list->map) + return -ENOMEM; + + map = list->map; + map->type = _DRM_GEM; + map->size = size; + map->handle = obj; + + /* Get a DRM GEM mmap offset allocated... */ + list->file_offset_node = drm_mm_search_free(&mm->offset_manager, + size / PAGE_SIZE, 0, 0); + + if (!list->file_offset_node) { + DRM_ERROR("failed to allocate offset for bo %d\n", obj->name); + ret = -ENOSPC; + goto out_free_list; + } + + list->file_offset_node = drm_mm_get_block(list->file_offset_node, + size / PAGE_SIZE, 0); + if (!list->file_offset_node) { + ret = -ENOMEM; + goto out_free_list; + } + + list->hash.key = list->file_offset_node->start; + ret = drm_ht_insert_item(&mm->offset_hash, &list->hash); + if (ret) { + DRM_ERROR("failed to add to map hash\n"); + goto out_free_mm; + } + + return 0; + +out_free_mm: + drm_mm_put_block(list->file_offset_node); +out_free_list: + kfree(list->map); + list->map = NULL; + + return ret; +} diff --git a/drivers/staging/omapdrm/omap_priv.h b/drivers/staging/omapdrm/omap_priv.h new file mode 100644 index 00000000000..c324709aa9a --- /dev/null +++ b/drivers/staging/omapdrm/omap_priv.h @@ -0,0 +1,47 @@ +/* + * include/drm/omap_priv.h + * + * Copyright (C) 2011 Texas Instruments + * Author: Rob Clark <rob@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __OMAP_PRIV_H__ +#define __OMAP_PRIV_H__ + +/* Non-userspace facing APIs + */ + +/* optional platform data to configure the default configuration of which + * pipes/overlays/CRTCs are used.. if this is not provided, then instead the + * first CONFIG_DRM_OMAP_NUM_CRTCS are used, and they are each connected to + * one manager, with priority given to managers that are connected to + * detected devices. This should be a good default behavior for most cases, + * but yet there still might be times when you wish to do something different. + */ +struct omap_kms_platform_data { + int ovl_cnt; + const int *ovl_ids; + int mgr_cnt; + const int *mgr_ids; + int dev_cnt; + const char **dev_names; +}; + +struct omap_drm_platform_data { + struct omap_kms_platform_data *kms_pdata; + struct omap_dmm_platform_data *dmm_pdata; +}; + +#endif /* __OMAP_DRM_H__ */ diff --git a/drivers/staging/omapdrm/tcm-sita.c b/drivers/staging/omapdrm/tcm-sita.c new file mode 100644 index 00000000000..10d5ac3dae4 --- /dev/null +++ b/drivers/staging/omapdrm/tcm-sita.c @@ -0,0 +1,703 @@ +/* + * tcm-sita.c + * + * SImple Tiler Allocator (SiTA): 2D and 1D allocation(reservation) algorithm + * + * Authors: Ravi Ramachandra <r.ramachandra@ti.com>, + * Lajos Molnar <molnar@ti.com> + * + * Copyright (C) 2009-2010 Texas Instruments, Inc. + * + * This package is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. + * + */ +#include <linux/slab.h> +#include <linux/spinlock.h> + +#include "tcm-sita.h" + +#define ALIGN_DOWN(value, align) ((value) & ~((align) - 1)) + +/* Individual selection criteria for different scan areas */ +static s32 CR_L2R_T2B = CR_BIAS_HORIZONTAL; +static s32 CR_R2L_T2B = CR_DIAGONAL_BALANCE; + +/********************************************* + * TCM API - Sita Implementation + *********************************************/ +static s32 sita_reserve_2d(struct tcm *tcm, u16 h, u16 w, u8 align, + struct tcm_area *area); +static s32 sita_reserve_1d(struct tcm *tcm, u32 slots, struct tcm_area *area); +static s32 sita_free(struct tcm *tcm, struct tcm_area *area); +static void sita_deinit(struct tcm *tcm); + +/********************************************* + * Main Scanner functions + *********************************************/ +static s32 scan_areas_and_find_fit(struct tcm *tcm, u16 w, u16 h, u16 align, + struct tcm_area *area); + +static s32 scan_l2r_t2b(struct tcm *tcm, u16 w, u16 h, u16 align, + struct tcm_area *field, struct tcm_area *area); + +static s32 scan_r2l_t2b(struct tcm *tcm, u16 w, u16 h, u16 align, + struct tcm_area *field, struct tcm_area *area); + +static s32 scan_r2l_b2t_one_dim(struct tcm *tcm, u32 num_slots, + struct tcm_area *field, struct tcm_area *area); + +/********************************************* + * Support Infrastructure Methods + *********************************************/ +static s32 is_area_free(struct tcm_area ***map, u16 x0, u16 y0, u16 w, u16 h); + +static s32 update_candidate(struct tcm *tcm, u16 x0, u16 y0, u16 w, u16 h, + struct tcm_area *field, s32 criteria, + struct score *best); + +static void get_nearness_factor(struct tcm_area *field, + struct tcm_area *candidate, + struct nearness_factor *nf); + +static void get_neighbor_stats(struct tcm *tcm, struct tcm_area *area, + struct neighbor_stats *stat); + +static void fill_area(struct tcm *tcm, + struct tcm_area *area, struct tcm_area *parent); + + +/*********************************************/ + +/********************************************* + * Utility Methods + *********************************************/ +struct tcm *sita_init(u16 width, u16 height, struct tcm_pt *attr) +{ + struct tcm *tcm; + struct sita_pvt *pvt; + struct tcm_area area = {0}; + s32 i; + + if (width == 0 || height == 0) + return NULL; + + tcm = kmalloc(sizeof(*tcm), GFP_KERNEL); + pvt = kmalloc(sizeof(*pvt), GFP_KERNEL); + if (!tcm || !pvt) + goto error; + + memset(tcm, 0, sizeof(*tcm)); + memset(pvt, 0, sizeof(*pvt)); + + /* Updating the pointers to SiTA implementation APIs */ + tcm->height = height; + tcm->width = width; + tcm->reserve_2d = sita_reserve_2d; + tcm->reserve_1d = sita_reserve_1d; + tcm->free = sita_free; + tcm->deinit = sita_deinit; + tcm->pvt = (void *)pvt; + + spin_lock_init(&(pvt->lock)); + + /* Creating tam map */ + pvt->map = kmalloc(sizeof(*pvt->map) * tcm->width, GFP_KERNEL); + if (!pvt->map) + goto error; + + for (i = 0; i < tcm->width; i++) { + pvt->map[i] = + kmalloc(sizeof(**pvt->map) * tcm->height, + GFP_KERNEL); + if (pvt->map[i] == NULL) { + while (i--) + kfree(pvt->map[i]); + kfree(pvt->map); + goto error; + } + } + + if (attr && attr->x <= tcm->width && attr->y <= tcm->height) { + pvt->div_pt.x = attr->x; + pvt->div_pt.y = attr->y; + + } else { + /* Defaulting to 3:1 ratio on width for 2D area split */ + /* Defaulting to 3:1 ratio on height for 2D and 1D split */ + pvt->div_pt.x = (tcm->width * 3) / 4; + pvt->div_pt.y = (tcm->height * 3) / 4; + } + + spin_lock(&(pvt->lock)); + assign(&area, 0, 0, width - 1, height - 1); + fill_area(tcm, &area, NULL); + spin_unlock(&(pvt->lock)); + return tcm; + +error: + kfree(tcm); + kfree(pvt); + return NULL; +} + +static void sita_deinit(struct tcm *tcm) +{ + struct sita_pvt *pvt = (struct sita_pvt *)tcm->pvt; + struct tcm_area area = {0}; + s32 i; + + area.p1.x = tcm->width - 1; + area.p1.y = tcm->height - 1; + + spin_lock(&(pvt->lock)); + fill_area(tcm, &area, NULL); + spin_unlock(&(pvt->lock)); + + for (i = 0; i < tcm->height; i++) + kfree(pvt->map[i]); + kfree(pvt->map); + kfree(pvt); +} + +/** + * Reserve a 1D area in the container + * + * @param num_slots size of 1D area + * @param area pointer to the area that will be populated with the + * reserved area + * + * @return 0 on success, non-0 error value on failure. + */ +static s32 sita_reserve_1d(struct tcm *tcm, u32 num_slots, + struct tcm_area *area) +{ + s32 ret; + struct tcm_area field = {0}; + struct sita_pvt *pvt = (struct sita_pvt *)tcm->pvt; + + spin_lock(&(pvt->lock)); + + /* Scanning entire container */ + assign(&field, tcm->width - 1, tcm->height - 1, 0, 0); + + ret = scan_r2l_b2t_one_dim(tcm, num_slots, &field, area); + if (!ret) + /* update map */ + fill_area(tcm, area, area); + + spin_unlock(&(pvt->lock)); + return ret; +} + +/** + * Reserve a 2D area in the container + * + * @param w width + * @param h height + * @param area pointer to the area that will be populated with the reesrved + * area + * + * @return 0 on success, non-0 error value on failure. + */ +static s32 sita_reserve_2d(struct tcm *tcm, u16 h, u16 w, u8 align, + struct tcm_area *area) +{ + s32 ret; + struct sita_pvt *pvt = (struct sita_pvt *)tcm->pvt; + + /* not supporting more than 64 as alignment */ + if (align > 64) + return -EINVAL; + + /* we prefer 1, 32 and 64 as alignment */ + align = align <= 1 ? 1 : align <= 32 ? 32 : 64; + + spin_lock(&(pvt->lock)); + ret = scan_areas_and_find_fit(tcm, w, h, align, area); + if (!ret) + /* update map */ + fill_area(tcm, area, area); + + spin_unlock(&(pvt->lock)); + return ret; +} + +/** + * Unreserve a previously allocated 2D or 1D area + * @param area area to be freed + * @return 0 - success + */ +static s32 sita_free(struct tcm *tcm, struct tcm_area *area) +{ + struct sita_pvt *pvt = (struct sita_pvt *)tcm->pvt; + + spin_lock(&(pvt->lock)); + + /* check that this is in fact an existing area */ + WARN_ON(pvt->map[area->p0.x][area->p0.y] != area || + pvt->map[area->p1.x][area->p1.y] != area); + + /* Clear the contents of the associated tiles in the map */ + fill_area(tcm, area, NULL); + + spin_unlock(&(pvt->lock)); + + return 0; +} + +/** + * Note: In general the cordinates in the scan field area relevant to the can + * sweep directions. The scan origin (e.g. top-left corner) will always be + * the p0 member of the field. Therfore, for a scan from top-left p0.x <= p1.x + * and p0.y <= p1.y; whereas, for a scan from bottom-right p1.x <= p0.x and p1.y + * <= p0.y + */ + +/** + * Raster scan horizontally right to left from top to bottom to find a place for + * a 2D area of given size inside a scan field. + * + * @param w width of desired area + * @param h height of desired area + * @param align desired area alignment + * @param area pointer to the area that will be set to the best position + * @param field area to scan (inclusive) + * + * @return 0 on success, non-0 error value on failure. + */ +static s32 scan_r2l_t2b(struct tcm *tcm, u16 w, u16 h, u16 align, + struct tcm_area *field, struct tcm_area *area) +{ + s32 x, y; + s16 start_x, end_x, start_y, end_y, found_x = -1; + struct tcm_area ***map = ((struct sita_pvt *)tcm->pvt)->map; + struct score best = {{0}, {0}, {0}, 0}; + + start_x = field->p0.x; + end_x = field->p1.x; + start_y = field->p0.y; + end_y = field->p1.y; + + /* check scan area co-ordinates */ + if (field->p0.x < field->p1.x || + field->p1.y < field->p0.y) + return -EINVAL; + + /* check if allocation would fit in scan area */ + if (w > LEN(start_x, end_x) || h > LEN(end_y, start_y)) + return -ENOSPC; + + /* adjust start_x and end_y, as allocation would not fit beyond */ + start_x = ALIGN_DOWN(start_x - w + 1, align); /* - 1 to be inclusive */ + end_y = end_y - h + 1; + + /* check if allocation would still fit in scan area */ + if (start_x < end_x) + return -ENOSPC; + + /* scan field top-to-bottom, right-to-left */ + for (y = start_y; y <= end_y; y++) { + for (x = start_x; x >= end_x; x -= align) { + if (is_area_free(map, x, y, w, h)) { + found_x = x; + + /* update best candidate */ + if (update_candidate(tcm, x, y, w, h, field, + CR_R2L_T2B, &best)) + goto done; + + /* change upper x bound */ + end_x = x + 1; + break; + } else if (map[x][y] && map[x][y]->is2d) { + /* step over 2D areas */ + x = ALIGN(map[x][y]->p0.x - w + 1, align); + } + } + + /* break if you find a free area shouldering the scan field */ + if (found_x == start_x) + break; + } + + if (!best.a.tcm) + return -ENOSPC; +done: + assign(area, best.a.p0.x, best.a.p0.y, best.a.p1.x, best.a.p1.y); + return 0; +} + +/** + * Raster scan horizontally left to right from top to bottom to find a place for + * a 2D area of given size inside a scan field. + * + * @param w width of desired area + * @param h height of desired area + * @param align desired area alignment + * @param area pointer to the area that will be set to the best position + * @param field area to scan (inclusive) + * + * @return 0 on success, non-0 error value on failure. + */ +static s32 scan_l2r_t2b(struct tcm *tcm, u16 w, u16 h, u16 align, + struct tcm_area *field, struct tcm_area *area) +{ + s32 x, y; + s16 start_x, end_x, start_y, end_y, found_x = -1; + struct tcm_area ***map = ((struct sita_pvt *)tcm->pvt)->map; + struct score best = {{0}, {0}, {0}, 0}; + + start_x = field->p0.x; + end_x = field->p1.x; + start_y = field->p0.y; + end_y = field->p1.y; + + /* check scan area co-ordinates */ + if (field->p1.x < field->p0.x || + field->p1.y < field->p0.y) + return -EINVAL; + + /* check if allocation would fit in scan area */ + if (w > LEN(end_x, start_x) || h > LEN(end_y, start_y)) + return -ENOSPC; + + start_x = ALIGN(start_x, align); + + /* check if allocation would still fit in scan area */ + if (w > LEN(end_x, start_x)) + return -ENOSPC; + + /* adjust end_x and end_y, as allocation would not fit beyond */ + end_x = end_x - w + 1; /* + 1 to be inclusive */ + end_y = end_y - h + 1; + + /* scan field top-to-bottom, left-to-right */ + for (y = start_y; y <= end_y; y++) { + for (x = start_x; x <= end_x; x += align) { + if (is_area_free(map, x, y, w, h)) { + found_x = x; + + /* update best candidate */ + if (update_candidate(tcm, x, y, w, h, field, + CR_L2R_T2B, &best)) + goto done; + /* change upper x bound */ + end_x = x - 1; + + break; + } else if (map[x][y] && map[x][y]->is2d) { + /* step over 2D areas */ + x = ALIGN_DOWN(map[x][y]->p1.x, align); + } + } + + /* break if you find a free area shouldering the scan field */ + if (found_x == start_x) + break; + } + + if (!best.a.tcm) + return -ENOSPC; +done: + assign(area, best.a.p0.x, best.a.p0.y, best.a.p1.x, best.a.p1.y); + return 0; +} + +/** + * Raster scan horizontally right to left from bottom to top to find a place + * for a 1D area of given size inside a scan field. + * + * @param num_slots size of desired area + * @param align desired area alignment + * @param area pointer to the area that will be set to the best + * position + * @param field area to scan (inclusive) + * + * @return 0 on success, non-0 error value on failure. + */ +static s32 scan_r2l_b2t_one_dim(struct tcm *tcm, u32 num_slots, + struct tcm_area *field, struct tcm_area *area) +{ + s32 found = 0; + s16 x, y; + struct sita_pvt *pvt = (struct sita_pvt *)tcm->pvt; + struct tcm_area *p; + + /* check scan area co-ordinates */ + if (field->p0.y < field->p1.y) + return -EINVAL; + + /** + * Currently we only support full width 1D scan field, which makes sense + * since 1D slot-ordering spans the full container width. + */ + if (tcm->width != field->p0.x - field->p1.x + 1) + return -EINVAL; + + /* check if allocation would fit in scan area */ + if (num_slots > tcm->width * LEN(field->p0.y, field->p1.y)) + return -ENOSPC; + + x = field->p0.x; + y = field->p0.y; + + /* find num_slots consecutive free slots to the left */ + while (found < num_slots) { + if (y < 0) + return -ENOSPC; + + /* remember bottom-right corner */ + if (found == 0) { + area->p1.x = x; + area->p1.y = y; + } + + /* skip busy regions */ + p = pvt->map[x][y]; + if (p) { + /* move to left of 2D areas, top left of 1D */ + x = p->p0.x; + if (!p->is2d) + y = p->p0.y; + + /* start over */ + found = 0; + } else { + /* count consecutive free slots */ + found++; + if (found == num_slots) + break; + } + + /* move to the left */ + if (x == 0) + y--; + x = (x ? : tcm->width) - 1; + + } + + /* set top-left corner */ + area->p0.x = x; + area->p0.y = y; + return 0; +} + +/** + * Find a place for a 2D area of given size inside a scan field based on its + * alignment needs. + * + * @param w width of desired area + * @param h height of desired area + * @param align desired area alignment + * @param area pointer to the area that will be set to the best position + * + * @return 0 on success, non-0 error value on failure. + */ +static s32 scan_areas_and_find_fit(struct tcm *tcm, u16 w, u16 h, u16 align, + struct tcm_area *area) +{ + s32 ret = 0; + struct tcm_area field = {0}; + u16 boundary_x, boundary_y; + struct sita_pvt *pvt = (struct sita_pvt *)tcm->pvt; + + if (align > 1) { + /* prefer top-left corner */ + boundary_x = pvt->div_pt.x - 1; + boundary_y = pvt->div_pt.y - 1; + + /* expand width and height if needed */ + if (w > pvt->div_pt.x) + boundary_x = tcm->width - 1; + if (h > pvt->div_pt.y) + boundary_y = tcm->height - 1; + + assign(&field, 0, 0, boundary_x, boundary_y); + ret = scan_l2r_t2b(tcm, w, h, align, &field, area); + + /* scan whole container if failed, but do not scan 2x */ + if (ret != 0 && (boundary_x != tcm->width - 1 || + boundary_y != tcm->height - 1)) { + /* scan the entire container if nothing found */ + assign(&field, 0, 0, tcm->width - 1, tcm->height - 1); + ret = scan_l2r_t2b(tcm, w, h, align, &field, area); + } + } else if (align == 1) { + /* prefer top-right corner */ + boundary_x = pvt->div_pt.x; + boundary_y = pvt->div_pt.y - 1; + + /* expand width and height if needed */ + if (w > (tcm->width - pvt->div_pt.x)) + boundary_x = 0; + if (h > pvt->div_pt.y) + boundary_y = tcm->height - 1; + + assign(&field, tcm->width - 1, 0, boundary_x, boundary_y); + ret = scan_r2l_t2b(tcm, w, h, align, &field, area); + + /* scan whole container if failed, but do not scan 2x */ + if (ret != 0 && (boundary_x != 0 || + boundary_y != tcm->height - 1)) { + /* scan the entire container if nothing found */ + assign(&field, tcm->width - 1, 0, 0, tcm->height - 1); + ret = scan_r2l_t2b(tcm, w, h, align, &field, + area); + } + } + + return ret; +} + +/* check if an entire area is free */ +static s32 is_area_free(struct tcm_area ***map, u16 x0, u16 y0, u16 w, u16 h) +{ + u16 x = 0, y = 0; + for (y = y0; y < y0 + h; y++) { + for (x = x0; x < x0 + w; x++) { + if (map[x][y]) + return false; + } + } + return true; +} + +/* fills an area with a parent tcm_area */ +static void fill_area(struct tcm *tcm, struct tcm_area *area, + struct tcm_area *parent) +{ + s32 x, y; + struct sita_pvt *pvt = (struct sita_pvt *)tcm->pvt; + struct tcm_area a, a_; + + /* set area's tcm; otherwise, enumerator considers it invalid */ + area->tcm = tcm; + + tcm_for_each_slice(a, *area, a_) { + for (x = a.p0.x; x <= a.p1.x; ++x) + for (y = a.p0.y; y <= a.p1.y; ++y) + pvt->map[x][y] = parent; + + } +} + +/** + * Compares a candidate area to the current best area, and if it is a better + * fit, it updates the best to this one. + * + * @param x0, y0, w, h top, left, width, height of candidate area + * @param field scan field + * @param criteria scan criteria + * @param best best candidate and its scores + * + * @return 1 (true) if the candidate area is known to be the final best, so no + * more searching should be performed + */ +static s32 update_candidate(struct tcm *tcm, u16 x0, u16 y0, u16 w, u16 h, + struct tcm_area *field, s32 criteria, + struct score *best) +{ + struct score me; /* score for area */ + + /* + * NOTE: For horizontal bias we always give the first found, because our + * scan is horizontal-raster-based and the first candidate will always + * have the horizontal bias. + */ + bool first = criteria & CR_BIAS_HORIZONTAL; + + assign(&me.a, x0, y0, x0 + w - 1, y0 + h - 1); + + /* calculate score for current candidate */ + if (!first) { + get_neighbor_stats(tcm, &me.a, &me.n); + me.neighs = me.n.edge + me.n.busy; + get_nearness_factor(field, &me.a, &me.f); + } + + /* the 1st candidate is always the best */ + if (!best->a.tcm) + goto better; + + BUG_ON(first); + + /* diagonal balance check */ + if ((criteria & CR_DIAGONAL_BALANCE) && + best->neighs <= me.neighs && + (best->neighs < me.neighs || + /* this implies that neighs and occupied match */ + best->n.busy < me.n.busy || + (best->n.busy == me.n.busy && + /* check the nearness factor */ + best->f.x + best->f.y > me.f.x + me.f.y))) + goto better; + + /* not better, keep going */ + return 0; + +better: + /* save current area as best */ + memcpy(best, &me, sizeof(me)); + best->a.tcm = tcm; + return first; +} + +/** + * Calculate the nearness factor of an area in a search field. The nearness + * factor is smaller if the area is closer to the search origin. + */ +static void get_nearness_factor(struct tcm_area *field, struct tcm_area *area, + struct nearness_factor *nf) +{ + /** + * Using signed math as field coordinates may be reversed if + * search direction is right-to-left or bottom-to-top. + */ + nf->x = (s32)(area->p0.x - field->p0.x) * 1000 / + (field->p1.x - field->p0.x); + nf->y = (s32)(area->p0.y - field->p0.y) * 1000 / + (field->p1.y - field->p0.y); +} + +/* get neighbor statistics */ +static void get_neighbor_stats(struct tcm *tcm, struct tcm_area *area, + struct neighbor_stats *stat) +{ + s16 x = 0, y = 0; + struct sita_pvt *pvt = (struct sita_pvt *)tcm->pvt; + + /* Clearing any exisiting values */ + memset(stat, 0, sizeof(*stat)); + + /* process top & bottom edges */ + for (x = area->p0.x; x <= area->p1.x; x++) { + if (area->p0.y == 0) + stat->edge++; + else if (pvt->map[x][area->p0.y - 1]) + stat->busy++; + + if (area->p1.y == tcm->height - 1) + stat->edge++; + else if (pvt->map[x][area->p1.y + 1]) + stat->busy++; + } + + /* process left & right edges */ + for (y = area->p0.y; y <= area->p1.y; ++y) { + if (area->p0.x == 0) + stat->edge++; + else if (pvt->map[area->p0.x - 1][y]) + stat->busy++; + + if (area->p1.x == tcm->width - 1) + stat->edge++; + else if (pvt->map[area->p1.x + 1][y]) + stat->busy++; + } +} diff --git a/drivers/staging/omapdrm/tcm-sita.h b/drivers/staging/omapdrm/tcm-sita.h new file mode 100644 index 00000000000..0444f868671 --- /dev/null +++ b/drivers/staging/omapdrm/tcm-sita.h @@ -0,0 +1,95 @@ +/* + * tcm_sita.h + * + * SImple Tiler Allocator (SiTA) private structures. + * + * Author: Ravi Ramachandra <r.ramachandra@ti.com> + * + * Copyright (C) 2009-2011 Texas Instruments, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * * Neither the name of Texas Instruments Incorporated nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; + * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _TCM_SITA_H +#define _TCM_SITA_H + +#include "tcm.h" + +/* length between two coordinates */ +#define LEN(a, b) ((a) > (b) ? (a) - (b) + 1 : (b) - (a) + 1) + +enum criteria { + CR_MAX_NEIGHS = 0x01, + CR_FIRST_FOUND = 0x10, + CR_BIAS_HORIZONTAL = 0x20, + CR_BIAS_VERTICAL = 0x40, + CR_DIAGONAL_BALANCE = 0x80 +}; + +/* nearness to the beginning of the search field from 0 to 1000 */ +struct nearness_factor { + s32 x; + s32 y; +}; + +/* + * Statistics on immediately neighboring slots. Edge is the number of + * border segments that are also border segments of the scan field. Busy + * refers to the number of neighbors that are occupied. + */ +struct neighbor_stats { + u16 edge; + u16 busy; +}; + +/* structure to keep the score of a potential allocation */ +struct score { + struct nearness_factor f; + struct neighbor_stats n; + struct tcm_area a; + u16 neighs; /* number of busy neighbors */ +}; + +struct sita_pvt { + spinlock_t lock; /* spinlock to protect access */ + struct tcm_pt div_pt; /* divider point splitting container */ + struct tcm_area ***map; /* pointers to the parent area for each slot */ +}; + +/* assign coordinates to area */ +static inline +void assign(struct tcm_area *a, u16 x0, u16 y0, u16 x1, u16 y1) +{ + a->p0.x = x0; + a->p0.y = y0; + a->p1.x = x1; + a->p1.y = y1; +} + +#endif diff --git a/drivers/staging/omapdrm/tcm.h b/drivers/staging/omapdrm/tcm.h new file mode 100644 index 00000000000..d273e3ee0b4 --- /dev/null +++ b/drivers/staging/omapdrm/tcm.h @@ -0,0 +1,326 @@ +/* + * tcm.h + * + * TILER container manager specification and support functions for TI + * TILER driver. + * + * Author: Lajos Molnar <molnar@ti.com> + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * * Neither the name of Texas Instruments Incorporated nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; + * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef TCM_H +#define TCM_H + +struct tcm; + +/* point */ +struct tcm_pt { + u16 x; + u16 y; +}; + +/* 1d or 2d area */ +struct tcm_area { + bool is2d; /* whether area is 1d or 2d */ + struct tcm *tcm; /* parent */ + struct tcm_pt p0; + struct tcm_pt p1; +}; + +struct tcm { + u16 width, height; /* container dimensions */ + int lut_id; /* Lookup table identifier */ + + /* 'pvt' structure shall contain any tcm details (attr) along with + linked list of allocated areas and mutex for mutually exclusive access + to the list. It may also contain copies of width and height to notice + any changes to the publicly available width and height fields. */ + void *pvt; + + /* function table */ + s32 (*reserve_2d)(struct tcm *tcm, u16 height, u16 width, u8 align, + struct tcm_area *area); + s32 (*reserve_1d)(struct tcm *tcm, u32 slots, struct tcm_area *area); + s32 (*free) (struct tcm *tcm, struct tcm_area *area); + void (*deinit) (struct tcm *tcm); +}; + +/*============================================================================= + BASIC TILER CONTAINER MANAGER INTERFACE +=============================================================================*/ + +/* + * NOTE: + * + * Since some basic parameter checking is done outside the TCM algorithms, + * TCM implementation do NOT have to check the following: + * + * area pointer is NULL + * width and height fits within container + * number of pages is more than the size of the container + * + */ + +struct tcm *sita_init(u16 width, u16 height, struct tcm_pt *attr); + + +/** + * Deinitialize tiler container manager. + * + * @param tcm Pointer to container manager. + * + * @return 0 on success, non-0 error value on error. The call + * should free as much memory as possible and meaningful + * even on failure. Some error codes: -ENODEV: invalid + * manager. + */ +static inline void tcm_deinit(struct tcm *tcm) +{ + if (tcm) + tcm->deinit(tcm); +} + +/** + * Reserves a 2D area in the container. + * + * @param tcm Pointer to container manager. + * @param height Height(in pages) of area to be reserved. + * @param width Width(in pages) of area to be reserved. + * @param align Alignment requirement for top-left corner of area. Not + * all values may be supported by the container manager, + * but it must support 0 (1), 32 and 64. + * 0 value is equivalent to 1. + * @param area Pointer to where the reserved area should be stored. + * + * @return 0 on success. Non-0 error code on failure. Also, + * the tcm field of the area will be set to NULL on + * failure. Some error codes: -ENODEV: invalid manager, + * -EINVAL: invalid area, -ENOMEM: not enough space for + * allocation. + */ +static inline s32 tcm_reserve_2d(struct tcm *tcm, u16 width, u16 height, + u16 align, struct tcm_area *area) +{ + /* perform rudimentary error checking */ + s32 res = tcm == NULL ? -ENODEV : + (area == NULL || width == 0 || height == 0 || + /* align must be a 2 power */ + (align & (align - 1))) ? -EINVAL : + (height > tcm->height || width > tcm->width) ? -ENOMEM : 0; + + if (!res) { + area->is2d = true; + res = tcm->reserve_2d(tcm, height, width, align, area); + area->tcm = res ? NULL : tcm; + } + + return res; +} + +/** + * Reserves a 1D area in the container. + * + * @param tcm Pointer to container manager. + * @param slots Number of (contiguous) slots to reserve. + * @param area Pointer to where the reserved area should be stored. + * + * @return 0 on success. Non-0 error code on failure. Also, + * the tcm field of the area will be set to NULL on + * failure. Some error codes: -ENODEV: invalid manager, + * -EINVAL: invalid area, -ENOMEM: not enough space for + * allocation. + */ +static inline s32 tcm_reserve_1d(struct tcm *tcm, u32 slots, + struct tcm_area *area) +{ + /* perform rudimentary error checking */ + s32 res = tcm == NULL ? -ENODEV : + (area == NULL || slots == 0) ? -EINVAL : + slots > (tcm->width * (u32) tcm->height) ? -ENOMEM : 0; + + if (!res) { + area->is2d = false; + res = tcm->reserve_1d(tcm, slots, area); + area->tcm = res ? NULL : tcm; + } + + return res; +} + +/** + * Free a previously reserved area from the container. + * + * @param area Pointer to area reserved by a prior call to + * tcm_reserve_1d or tcm_reserve_2d call, whether + * it was successful or not. (Note: all fields of + * the structure must match.) + * + * @return 0 on success. Non-0 error code on failure. Also, the tcm + * field of the area is set to NULL on success to avoid subsequent + * freeing. This call will succeed even if supplying + * the area from a failed reserved call. + */ +static inline s32 tcm_free(struct tcm_area *area) +{ + s32 res = 0; /* free succeeds by default */ + + if (area && area->tcm) { + res = area->tcm->free(area->tcm, area); + if (res == 0) + area->tcm = NULL; + } + + return res; +} + +/*============================================================================= + HELPER FUNCTION FOR ANY TILER CONTAINER MANAGER +=============================================================================*/ + +/** + * This method slices off the topmost 2D slice from the parent area, and stores + * it in the 'slice' parameter. The 'parent' parameter will get modified to + * contain the remaining portion of the area. If the whole parent area can + * fit in a 2D slice, its tcm pointer is set to NULL to mark that it is no + * longer a valid area. + * + * @param parent Pointer to a VALID parent area that will get modified + * @param slice Pointer to the slice area that will get modified + */ +static inline void tcm_slice(struct tcm_area *parent, struct tcm_area *slice) +{ + *slice = *parent; + + /* check if we need to slice */ + if (slice->tcm && !slice->is2d && + slice->p0.y != slice->p1.y && + (slice->p0.x || (slice->p1.x != slice->tcm->width - 1))) { + /* set end point of slice (start always remains) */ + slice->p1.x = slice->tcm->width - 1; + slice->p1.y = (slice->p0.x) ? slice->p0.y : slice->p1.y - 1; + /* adjust remaining area */ + parent->p0.x = 0; + parent->p0.y = slice->p1.y + 1; + } else { + /* mark this as the last slice */ + parent->tcm = NULL; + } +} + +/* Verify if a tcm area is logically valid */ +static inline bool tcm_area_is_valid(struct tcm_area *area) +{ + return area && area->tcm && + /* coordinate bounds */ + area->p1.x < area->tcm->width && + area->p1.y < area->tcm->height && + area->p0.y <= area->p1.y && + /* 1D coordinate relationship + p0.x check */ + ((!area->is2d && + area->p0.x < area->tcm->width && + area->p0.x + area->p0.y * area->tcm->width <= + area->p1.x + area->p1.y * area->tcm->width) || + /* 2D coordinate relationship */ + (area->is2d && + area->p0.x <= area->p1.x)); +} + +/* see if a coordinate is within an area */ +static inline bool __tcm_is_in(struct tcm_pt *p, struct tcm_area *a) +{ + u16 i; + + if (a->is2d) { + return p->x >= a->p0.x && p->x <= a->p1.x && + p->y >= a->p0.y && p->y <= a->p1.y; + } else { + i = p->x + p->y * a->tcm->width; + return i >= a->p0.x + a->p0.y * a->tcm->width && + i <= a->p1.x + a->p1.y * a->tcm->width; + } +} + +/* calculate area width */ +static inline u16 __tcm_area_width(struct tcm_area *area) +{ + return area->p1.x - area->p0.x + 1; +} + +/* calculate area height */ +static inline u16 __tcm_area_height(struct tcm_area *area) +{ + return area->p1.y - area->p0.y + 1; +} + +/* calculate number of slots in an area */ +static inline u16 __tcm_sizeof(struct tcm_area *area) +{ + return area->is2d ? + __tcm_area_width(area) * __tcm_area_height(area) : + (area->p1.x - area->p0.x + 1) + (area->p1.y - area->p0.y) * + area->tcm->width; +} +#define tcm_sizeof(area) __tcm_sizeof(&(area)) +#define tcm_awidth(area) __tcm_area_width(&(area)) +#define tcm_aheight(area) __tcm_area_height(&(area)) +#define tcm_is_in(pt, area) __tcm_is_in(&(pt), &(area)) + +/* limit a 1D area to the first N pages */ +static inline s32 tcm_1d_limit(struct tcm_area *a, u32 num_pg) +{ + if (__tcm_sizeof(a) < num_pg) + return -ENOMEM; + if (!num_pg) + return -EINVAL; + + a->p1.x = (a->p0.x + num_pg - 1) % a->tcm->width; + a->p1.y = a->p0.y + ((a->p0.x + num_pg - 1) / a->tcm->width); + return 0; +} + +/** + * Iterate through 2D slices of a valid area. Behaves + * syntactically as a for(;;) statement. + * + * @param var Name of a local variable of type 'struct + * tcm_area *' that will get modified to + * contain each slice. + * @param area Pointer to the VALID parent area. This + * structure will not get modified + * throughout the loop. + * + */ +#define tcm_for_each_slice(var, area, safe) \ + for (safe = area, \ + tcm_slice(&safe, &var); \ + var.tcm; tcm_slice(&safe, &var)) + +#endif |