diff options
Diffstat (limited to 'drivers/staging/tm6000/tm6000-cards.c')
| -rw-r--r-- | drivers/staging/tm6000/tm6000-cards.c | 1382 |
1 files changed, 0 insertions, 1382 deletions
diff --git a/drivers/staging/tm6000/tm6000-cards.c b/drivers/staging/tm6000/tm6000-cards.c deleted file mode 100644 index 9227db5d895..00000000000 --- a/drivers/staging/tm6000/tm6000-cards.c +++ /dev/null @@ -1,1382 +0,0 @@ -/* - * tm6000-cards.c - driver for TM5600/TM6000/TM6010 USB video capture devices - * - * Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation version 2 - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/i2c.h> -#include <linux/usb.h> -#include <linux/slab.h> -#include <media/v4l2-common.h> -#include <media/tuner.h> -#include <media/tvaudio.h> -#include <media/i2c-addr.h> -#include <media/rc-map.h> - -#include "tm6000.h" -#include "tm6000-regs.h" -#include "tuner-xc2028.h" -#include "xc5000.h" - -#define TM6000_BOARD_UNKNOWN 0 -#define TM5600_BOARD_GENERIC 1 -#define TM6000_BOARD_GENERIC 2 -#define TM6010_BOARD_GENERIC 3 -#define TM5600_BOARD_10MOONS_UT821 4 -#define TM5600_BOARD_10MOONS_UT330 5 -#define TM6000_BOARD_ADSTECH_DUAL_TV 6 -#define TM6000_BOARD_FREECOM_AND_SIMILAR 7 -#define TM6000_BOARD_ADSTECH_MINI_DUAL_TV 8 -#define TM6010_BOARD_HAUPPAUGE_900H 9 -#define TM6010_BOARD_BEHOLD_WANDER 10 -#define TM6010_BOARD_BEHOLD_VOYAGER 11 -#define TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE 12 -#define TM6010_BOARD_TWINHAN_TU501 13 -#define TM6010_BOARD_BEHOLD_WANDER_LITE 14 -#define TM6010_BOARD_BEHOLD_VOYAGER_LITE 15 -#define TM5600_BOARD_TERRATEC_GRABSTER 16 - -#define is_generic(model) ((model == TM6000_BOARD_UNKNOWN) || \ - (model == TM5600_BOARD_GENERIC) || \ - (model == TM6000_BOARD_GENERIC) || \ - (model == TM6010_BOARD_GENERIC)) - -#define TM6000_MAXBOARDS 16 -static unsigned int card[] = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET }; - -module_param_array(card, int, NULL, 0444); - -static unsigned long tm6000_devused; - - -struct tm6000_board { - char *name; - char eename[16]; /* EEPROM name */ - unsigned eename_size; /* size of EEPROM name */ - unsigned eename_pos; /* Position where it appears at ROM */ - - struct tm6000_capabilities caps; - - enum tm6000_devtype type; /* variant of the chipset */ - int tuner_type; /* type of the tuner */ - int tuner_addr; /* tuner address */ - int demod_addr; /* demodulator address */ - - struct tm6000_gpio gpio; - - struct tm6000_input vinput[3]; - struct tm6000_input rinput; - - char *ir_codes; -}; - -struct tm6000_board tm6000_boards[] = { - [TM6000_BOARD_UNKNOWN] = { - .name = "Unknown tm6000 video grabber", - .caps = { - .has_tuner = 1, - .has_eeprom = 1, - }, - .gpio = { - .tuner_reset = TM6000_GPIO_1, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_ADC1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM5600_BOARD_GENERIC] = { - .name = "Generic tm5600 board", - .type = TM5600, - .tuner_type = TUNER_XC2028, - .tuner_addr = 0xc2 >> 1, - .caps = { - .has_tuner = 1, - .has_eeprom = 1, - }, - .gpio = { - .tuner_reset = TM6000_GPIO_1, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_ADC1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM6000_BOARD_GENERIC] = { - .name = "Generic tm6000 board", - .tuner_type = TUNER_XC2028, - .tuner_addr = 0xc2 >> 1, - .caps = { - .has_tuner = 1, - .has_eeprom = 1, - }, - .gpio = { - .tuner_reset = TM6000_GPIO_1, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_ADC1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM6010_BOARD_GENERIC] = { - .name = "Generic tm6010 board", - .type = TM6010, - .tuner_type = TUNER_XC2028, - .tuner_addr = 0xc2 >> 1, - .demod_addr = 0x1e >> 1, - .caps = { - .has_tuner = 1, - .has_dvb = 1, - .has_zl10353 = 1, - .has_eeprom = 1, - .has_remote = 1, - }, - .gpio = { - .tuner_reset = TM6010_GPIO_2, - .tuner_on = TM6010_GPIO_3, - .demod_reset = TM6010_GPIO_1, - .demod_on = TM6010_GPIO_4, - .power_led = TM6010_GPIO_7, - .dvb_led = TM6010_GPIO_5, - .ir = TM6010_GPIO_0, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_SIF1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM5600_BOARD_10MOONS_UT821] = { - .name = "10Moons UT 821", - .tuner_type = TUNER_XC2028, - .eename = { '1', '0', 'M', 'O', 'O', 'N', 'S', '5', '6', '0', '0', 0xff, 0x45, 0x5b}, - .eename_size = 14, - .eename_pos = 0x14, - .type = TM5600, - .tuner_addr = 0xc2 >> 1, - .caps = { - .has_tuner = 1, - .has_eeprom = 1, - }, - .gpio = { - .tuner_reset = TM6000_GPIO_1, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_ADC1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM5600_BOARD_10MOONS_UT330] = { - .name = "10Moons UT 330", - .tuner_type = TUNER_PHILIPS_FQ1216AME_MK4, - .tuner_addr = 0xc8 >> 1, - .caps = { - .has_tuner = 1, - .has_dvb = 0, - .has_zl10353 = 0, - .has_eeprom = 1, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_ADC1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM6000_BOARD_ADSTECH_DUAL_TV] = { - .name = "ADSTECH Dual TV USB", - .tuner_type = TUNER_XC2028, - .tuner_addr = 0xc8 >> 1, - .caps = { - .has_tuner = 1, - .has_tda9874 = 1, - .has_dvb = 1, - .has_zl10353 = 1, - .has_eeprom = 1, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_ADC1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM6000_BOARD_FREECOM_AND_SIMILAR] = { - .name = "Freecom Hybrid Stick / Moka DVB-T Receiver Dual", - .tuner_type = TUNER_XC2028, /* has a XC3028 */ - .tuner_addr = 0xc2 >> 1, - .demod_addr = 0x1e >> 1, - .caps = { - .has_tuner = 1, - .has_dvb = 1, - .has_zl10353 = 1, - .has_eeprom = 0, - .has_remote = 1, - }, - .gpio = { - .tuner_reset = TM6000_GPIO_4, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_ADC1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM6000_BOARD_ADSTECH_MINI_DUAL_TV] = { - .name = "ADSTECH Mini Dual TV USB", - .tuner_type = TUNER_XC2028, /* has a XC3028 */ - .tuner_addr = 0xc8 >> 1, - .demod_addr = 0x1e >> 1, - .caps = { - .has_tuner = 1, - .has_dvb = 1, - .has_zl10353 = 1, - .has_eeprom = 0, - }, - .gpio = { - .tuner_reset = TM6000_GPIO_4, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_ADC1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM6010_BOARD_HAUPPAUGE_900H] = { - .name = "Hauppauge WinTV HVR-900H / WinTV USB2-Stick", - .eename = { 'H', 0, 'V', 0, 'R', 0, '9', 0, '0', 0, '0', 0, 'H', 0 }, - .eename_size = 14, - .eename_pos = 0x42, - .tuner_type = TUNER_XC2028, /* has a XC3028 */ - .tuner_addr = 0xc2 >> 1, - .demod_addr = 0x1e >> 1, - .type = TM6010, - .caps = { - .has_tuner = 1, - .has_dvb = 1, - .has_zl10353 = 1, - .has_eeprom = 1, - .has_remote = 1, - }, - .gpio = { - .tuner_reset = TM6010_GPIO_2, - .tuner_on = TM6010_GPIO_3, - .demod_reset = TM6010_GPIO_1, - .demod_on = TM6010_GPIO_4, - .power_led = TM6010_GPIO_7, - .dvb_led = TM6010_GPIO_5, - .ir = TM6010_GPIO_0, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_SIF1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM6010_BOARD_BEHOLD_WANDER] = { - .name = "Beholder Wander DVB-T/TV/FM USB2.0", - .tuner_type = TUNER_XC5000, - .tuner_addr = 0xc2 >> 1, - .demod_addr = 0x1e >> 1, - .type = TM6010, - .caps = { - .has_tuner = 1, - .has_dvb = 1, - .has_zl10353 = 1, - .has_eeprom = 1, - .has_remote = 1, - .has_radio = 1. - }, - .gpio = { - .tuner_reset = TM6010_GPIO_0, - .demod_reset = TM6010_GPIO_1, - .power_led = TM6010_GPIO_6, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_SIF1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - .rinput = { - .type = TM6000_INPUT_RADIO, - .amux = TM6000_AMUX_ADC1, - }, - }, - [TM6010_BOARD_BEHOLD_VOYAGER] = { - .name = "Beholder Voyager TV/FM USB2.0", - .tuner_type = TUNER_XC5000, - .tuner_addr = 0xc2 >> 1, - .type = TM6010, - .caps = { - .has_tuner = 1, - .has_dvb = 0, - .has_zl10353 = 0, - .has_eeprom = 1, - .has_remote = 1, - .has_radio = 1, - }, - .gpio = { - .tuner_reset = TM6010_GPIO_0, - .power_led = TM6010_GPIO_6, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_SIF1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - .rinput = { - .type = TM6000_INPUT_RADIO, - .amux = TM6000_AMUX_ADC1, - }, - }, - [TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE] = { - .name = "Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick", - .tuner_type = TUNER_XC2028, /* has a XC3028 */ - .tuner_addr = 0xc2 >> 1, - .demod_addr = 0x1e >> 1, - .type = TM6010, - .caps = { - .has_tuner = 1, - .has_dvb = 1, - .has_zl10353 = 1, - .has_eeprom = 1, - .has_remote = 1, - }, - .gpio = { - .tuner_reset = TM6010_GPIO_2, - .tuner_on = TM6010_GPIO_3, - .demod_reset = TM6010_GPIO_1, - .demod_on = TM6010_GPIO_4, - .power_led = TM6010_GPIO_7, - .dvb_led = TM6010_GPIO_5, - .ir = TM6010_GPIO_0, - }, - .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_SIF1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM5600_BOARD_TERRATEC_GRABSTER] = { - .name = "Terratec Grabster AV 150/250 MX", - .type = TM5600, - .tuner_type = TUNER_ABSENT, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_ADC1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM6010_BOARD_TWINHAN_TU501] = { - .name = "Twinhan TU501(704D1)", - .tuner_type = TUNER_XC2028, /* has a XC3028 */ - .tuner_addr = 0xc2 >> 1, - .demod_addr = 0x1e >> 1, - .type = TM6010, - .caps = { - .has_tuner = 1, - .has_dvb = 1, - .has_zl10353 = 1, - .has_eeprom = 1, - .has_remote = 1, - }, - .gpio = { - .tuner_reset = TM6010_GPIO_2, - .tuner_on = TM6010_GPIO_3, - .demod_reset = TM6010_GPIO_1, - .demod_on = TM6010_GPIO_4, - .power_led = TM6010_GPIO_7, - .dvb_led = TM6010_GPIO_5, - .ir = TM6010_GPIO_0, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_SIF1, - }, { - .type = TM6000_INPUT_COMPOSITE1, - .vmux = TM6000_VMUX_VIDEO_A, - .amux = TM6000_AMUX_ADC2, - }, { - .type = TM6000_INPUT_SVIDEO, - .vmux = TM6000_VMUX_VIDEO_AB, - .amux = TM6000_AMUX_ADC2, - }, - }, - }, - [TM6010_BOARD_BEHOLD_WANDER_LITE] = { - .name = "Beholder Wander Lite DVB-T/TV/FM USB2.0", - .tuner_type = TUNER_XC5000, - .tuner_addr = 0xc2 >> 1, - .demod_addr = 0x1e >> 1, - .type = TM6010, - .caps = { - .has_tuner = 1, - .has_dvb = 1, - .has_zl10353 = 1, - .has_eeprom = 1, - .has_remote = 0, - .has_radio = 1, - }, - .gpio = { - .tuner_reset = TM6010_GPIO_0, - .demod_reset = TM6010_GPIO_1, - .power_led = TM6010_GPIO_6, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_SIF1, - }, - }, - .rinput = { - .type = TM6000_INPUT_RADIO, - .amux = TM6000_AMUX_ADC1, - }, - }, - [TM6010_BOARD_BEHOLD_VOYAGER_LITE] = { - .name = "Beholder Voyager Lite TV/FM USB2.0", - .tuner_type = TUNER_XC5000, - .tuner_addr = 0xc2 >> 1, - .type = TM6010, - .caps = { - .has_tuner = 1, - .has_dvb = 0, - .has_zl10353 = 0, - .has_eeprom = 1, - .has_remote = 0, - .has_radio = 1, - }, - .gpio = { - .tuner_reset = TM6010_GPIO_0, - .power_led = TM6010_GPIO_6, - }, - .vinput = { { - .type = TM6000_INPUT_TV, - .vmux = TM6000_VMUX_VIDEO_B, - .amux = TM6000_AMUX_SIF1, - }, - }, - .rinput = { - .type = TM6000_INPUT_RADIO, - .amux = TM6000_AMUX_ADC1, - }, - }, -}; - -/* table of devices that work with this driver */ -struct usb_device_id tm6000_id_table[] = { - { USB_DEVICE(0x6000, 0x0001), .driver_info = TM5600_BOARD_GENERIC }, - { USB_DEVICE(0x6000, 0x0002), .driver_info = TM6010_BOARD_GENERIC }, - { USB_DEVICE(0x06e1, 0xf332), .driver_info = TM6000_BOARD_ADSTECH_DUAL_TV }, - { USB_DEVICE(0x14aa, 0x0620), .driver_info = TM6000_BOARD_FREECOM_AND_SIMILAR }, - { USB_DEVICE(0x06e1, 0xb339), .driver_info = TM6000_BOARD_ADSTECH_MINI_DUAL_TV }, - { USB_DEVICE(0x2040, 0x6600), .driver_info = TM6010_BOARD_HAUPPAUGE_900H }, - { USB_DEVICE(0x2040, 0x6601), .driver_info = TM6010_BOARD_HAUPPAUGE_900H }, - { USB_DEVICE(0x2040, 0x6610), .driver_info = TM6010_BOARD_HAUPPAUGE_900H }, - { USB_DEVICE(0x2040, 0x6611), .driver_info = TM6010_BOARD_HAUPPAUGE_900H }, - { USB_DEVICE(0x6000, 0xdec0), .driver_info = TM6010_BOARD_BEHOLD_WANDER }, - { USB_DEVICE(0x6000, 0xdec1), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER }, - { USB_DEVICE(0x0ccd, 0x0086), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE }, - { USB_DEVICE(0x0ccd, 0x00A5), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE }, - { USB_DEVICE(0x0ccd, 0x0079), .driver_info = TM5600_BOARD_TERRATEC_GRABSTER }, - { USB_DEVICE(0x13d3, 0x3240), .driver_info = TM6010_BOARD_TWINHAN_TU501 }, - { USB_DEVICE(0x13d3, 0x3241), .driver_info = TM6010_BOARD_TWINHAN_TU501 }, - { USB_DEVICE(0x13d3, 0x3243), .driver_info = TM6010_BOARD_TWINHAN_TU501 }, - { USB_DEVICE(0x13d3, 0x3264), .driver_info = TM6010_BOARD_TWINHAN_TU501 }, - { USB_DEVICE(0x6000, 0xdec2), .driver_info = TM6010_BOARD_BEHOLD_WANDER_LITE }, - { USB_DEVICE(0x6000, 0xdec3), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER_LITE }, - { }, -}; - -/* Control power led for show some activity */ -void tm6000_flash_led(struct tm6000_core *dev, u8 state) -{ - /* Power LED unconfigured */ - if (!dev->gpio.power_led) - return; - - /* ON Power LED */ - if (state) { - switch (dev->model) { - case TM6010_BOARD_HAUPPAUGE_900H: - case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: - case TM6010_BOARD_TWINHAN_TU501: - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.power_led, 0x00); - break; - case TM6010_BOARD_BEHOLD_WANDER: - case TM6010_BOARD_BEHOLD_VOYAGER: - case TM6010_BOARD_BEHOLD_WANDER_LITE: - case TM6010_BOARD_BEHOLD_VOYAGER_LITE: - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.power_led, 0x01); - break; - } - } - /* OFF Power LED */ - else { - switch (dev->model) { - case TM6010_BOARD_HAUPPAUGE_900H: - case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: - case TM6010_BOARD_TWINHAN_TU501: - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.power_led, 0x01); - break; - case TM6010_BOARD_BEHOLD_WANDER: - case TM6010_BOARD_BEHOLD_VOYAGER: - case TM6010_BOARD_BEHOLD_WANDER_LITE: - case TM6010_BOARD_BEHOLD_VOYAGER_LITE: - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.power_led, 0x00); - break; - } - } -} - -/* Tuner callback to provide the proper gpio changes needed for xc5000 */ -int tm6000_xc5000_callback(void *ptr, int component, int command, int arg) -{ - int rc = 0; - struct tm6000_core *dev = ptr; - - if (dev->tuner_type != TUNER_XC5000) - return 0; - - switch (command) { - case XC5000_TUNER_RESET: - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x01); - msleep(15); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x00); - msleep(15); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x01); - break; - } - return rc; -} -EXPORT_SYMBOL_GPL(tm6000_xc5000_callback); - -/* Tuner callback to provide the proper gpio changes needed for xc2028 */ - -int tm6000_tuner_callback(void *ptr, int component, int command, int arg) -{ - int rc = 0; - struct tm6000_core *dev = ptr; - - if (dev->tuner_type != TUNER_XC2028) - return 0; - - switch (command) { - case XC2028_RESET_CLK: - tm6000_ir_wait(dev, 0); - - tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, - 0x02, arg); - msleep(10); - rc = tm6000_i2c_reset(dev, 10); - break; - case XC2028_TUNER_RESET: - /* Reset codes during load firmware */ - switch (arg) { - case 0: - /* newer tuner can faster reset */ - switch (dev->model) { - case TM5600_BOARD_10MOONS_UT821: - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x01); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - 0x300, 0x01); - msleep(10); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x00); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - 0x300, 0x00); - msleep(10); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x01); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - 0x300, 0x01); - break; - case TM6010_BOARD_HAUPPAUGE_900H: - case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: - case TM6010_BOARD_TWINHAN_TU501: - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x01); - msleep(60); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x00); - msleep(75); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x01); - msleep(60); - break; - default: - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x00); - msleep(130); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x01); - msleep(130); - break; - } - - tm6000_ir_wait(dev, 1); - break; - case 1: - tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, - 0x02, 0x01); - msleep(10); - break; - case 2: - rc = tm6000_i2c_reset(dev, 100); - break; - } - } - return rc; -} -EXPORT_SYMBOL_GPL(tm6000_tuner_callback); - -int tm6000_cards_setup(struct tm6000_core *dev) -{ - int i, rc; - - /* - * Board-specific initialization sequence. Handles all GPIO - * initialization sequences that are board-specific. - * Up to now, all found devices use GPIO1 and GPIO4 at the same way. - * Probably, they're all based on some reference device. Due to that, - * there's a common routine at the end to handle those GPIO's. Devices - * that use different pinups or init sequences can just return at - * the board-specific session. - */ - switch (dev->model) { - case TM6010_BOARD_HAUPPAUGE_900H: - case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: - case TM6010_BOARD_TWINHAN_TU501: - case TM6010_BOARD_GENERIC: - /* Turn xceive 3028 on */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_on, 0x01); - msleep(15); - /* Turn zarlink zl10353 on */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00); - msleep(15); - /* Reset zarlink zl10353 */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00); - msleep(50); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01); - msleep(15); - /* Turn zarlink zl10353 off */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x01); - msleep(15); - /* ir ? */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.ir, 0x01); - msleep(15); - /* Power led on (blue) */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x00); - msleep(15); - /* DVB led off (orange) */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.dvb_led, 0x01); - msleep(15); - /* Turn zarlink zl10353 on */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00); - msleep(15); - break; - case TM6010_BOARD_BEHOLD_WANDER: - case TM6010_BOARD_BEHOLD_WANDER_LITE: - /* Power led on (blue) */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01); - msleep(15); - /* Reset zarlink zl10353 */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00); - msleep(50); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01); - msleep(15); - break; - case TM6010_BOARD_BEHOLD_VOYAGER: - case TM6010_BOARD_BEHOLD_VOYAGER_LITE: - /* Power led on (blue) */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01); - msleep(15); - break; - default: - break; - } - - /* - * Default initialization. Most of the devices seem to use GPIO1 - * and GPIO4.on the same way, so, this handles the common sequence - * used by most devices. - * If a device uses a different sequence or different GPIO pins for - * reset, just add the code at the board-specific part - */ - - if (dev->gpio.tuner_reset) { - for (i = 0; i < 2; i++) { - rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x00); - if (rc < 0) { - printk(KERN_ERR "Error %i doing tuner reset\n", rc); - return rc; - } - - msleep(10); /* Just to be conservative */ - rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.tuner_reset, 0x01); - if (rc < 0) { - printk(KERN_ERR "Error %i doing tuner reset\n", rc); - return rc; - } - } - } else { - printk(KERN_ERR "Tuner reset is not configured\n"); - return -1; - } - - msleep(50); - - return 0; -}; - -static void tm6000_config_tuner(struct tm6000_core *dev) -{ - struct tuner_setup tun_setup; - - /* Load tuner module */ - v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, - "tuner", dev->tuner_addr, NULL); - - memset(&tun_setup, 0, sizeof(tun_setup)); - tun_setup.type = dev->tuner_type; - tun_setup.addr = dev->tuner_addr; - - tun_setup.mode_mask = 0; - if (dev->caps.has_tuner) - tun_setup.mode_mask |= (T_ANALOG_TV | T_RADIO); - - switch (dev->tuner_type) { - case TUNER_XC2028: - tun_setup.tuner_callback = tm6000_tuner_callback; - break; - case TUNER_XC5000: - tun_setup.tuner_callback = tm6000_xc5000_callback; - break; - } - - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup); - - switch (dev->tuner_type) { - case TUNER_XC2028: { - struct v4l2_priv_tun_config xc2028_cfg; - struct xc2028_ctrl ctl; - - memset(&xc2028_cfg, 0, sizeof(xc2028_cfg)); - memset(&ctl, 0, sizeof(ctl)); - - ctl.demod = XC3028_FE_ZARLINK456; - - xc2028_cfg.tuner = TUNER_XC2028; - xc2028_cfg.priv = &ctl; - - switch (dev->model) { - case TM6010_BOARD_HAUPPAUGE_900H: - case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: - case TM6010_BOARD_TWINHAN_TU501: - ctl.fname = "xc3028L-v36.fw"; - break; - default: - if (dev->dev_type == TM6010) - ctl.fname = "xc3028-v27.fw"; - else - ctl.fname = "xc3028-v24.fw"; - } - - printk(KERN_INFO "Setting firmware parameters for xc2028\n"); - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, - &xc2028_cfg); - - } - break; - case TUNER_XC5000: - { - struct v4l2_priv_tun_config xc5000_cfg; - struct xc5000_config ctl = { - .i2c_address = dev->tuner_addr, - .if_khz = 4570, - .radio_input = XC5000_RADIO_FM1_MONO, - }; - - xc5000_cfg.tuner = TUNER_XC5000; - xc5000_cfg.priv = &ctl; - - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, - &xc5000_cfg); - } - break; - default: - printk(KERN_INFO "Unknown tuner type. Tuner is not configured.\n"); - break; - } -} - -static int fill_board_specific_data(struct tm6000_core *dev) -{ - int rc; - - dev->dev_type = tm6000_boards[dev->model].type; - dev->tuner_type = tm6000_boards[dev->model].tuner_type; - dev->tuner_addr = tm6000_boards[dev->model].tuner_addr; - - dev->gpio = tm6000_boards[dev->model].gpio; - - dev->ir_codes = tm6000_boards[dev->model].ir_codes; - - dev->demod_addr = tm6000_boards[dev->model].demod_addr; - - dev->caps = tm6000_boards[dev->model].caps; - - dev->vinput[0] = tm6000_boards[dev->model].vinput[0]; - dev->vinput[1] = tm6000_boards[dev->model].vinput[1]; - dev->vinput[2] = tm6000_boards[dev->model].vinput[2]; - dev->rinput = tm6000_boards[dev->model].rinput; - - /* initialize hardware */ - rc = tm6000_init(dev); - if (rc < 0) - return rc; - - return v4l2_device_register(&dev->udev->dev, &dev->v4l2_dev); -} - - -static void use_alternative_detection_method(struct tm6000_core *dev) -{ - int i, model = -1; - - if (!dev->eedata_size) - return; - - for (i = 0; i < ARRAY_SIZE(tm6000_boards); i++) { - if (!tm6000_boards[i].eename_size) - continue; - if (dev->eedata_size < tm6000_boards[i].eename_pos + - tm6000_boards[i].eename_size) - continue; - - if (!memcmp(&dev->eedata[tm6000_boards[i].eename_pos], - tm6000_boards[i].eename, - tm6000_boards[i].eename_size)) { - model = i; - break; - } - } - if (model < 0) { - printk(KERN_INFO "Device has eeprom but is currently unknown\n"); - return; - } - - dev->model = model; - - printk(KERN_INFO "Device identified via eeprom as %s (type = %d)\n", - tm6000_boards[model].name, model); -} - -static int tm6000_init_dev(struct tm6000_core *dev) -{ - struct v4l2_frequency f; - int rc = 0; - - mutex_init(&dev->lock); - mutex_lock(&dev->lock); - - if (!is_generic(dev->model)) { - rc = fill_board_specific_data(dev); - if (rc < 0) - goto err; - - /* register i2c bus */ - rc = tm6000_i2c_register(dev); - if (rc < 0) - goto err; - } else { - /* register i2c bus */ - rc = tm6000_i2c_register(dev); - if (rc < 0) - goto err; - - use_alternative_detection_method(dev); - - rc = fill_board_specific_data(dev); - if (rc < 0) - goto err; - } - - /* Default values for STD and resolutions */ - dev->width = 720; - dev->height = 480; - dev->norm = V4L2_STD_PAL_M; - - /* Configure tuner */ - tm6000_config_tuner(dev); - - /* Set video standard */ - v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm); - - /* Set tuner frequency - also loads firmware on xc2028/xc3028 */ - f.tuner = 0; - f.type = V4L2_TUNER_ANALOG_TV; - f.frequency = 3092; /* 193.25 MHz */ - dev->freq = f.frequency; - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f); - - if (dev->caps.has_tda9874) - v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, - "tvaudio", I2C_ADDR_TDA9874, NULL); - - /* register and initialize V4L2 */ - rc = tm6000_v4l2_register(dev); - if (rc < 0) - goto err; - - tm6000_add_into_devlist(dev); - tm6000_init_extension(dev); - - tm6000_ir_init(dev); - - mutex_unlock(&dev->lock); - return 0; - -err: - mutex_unlock(&dev->lock); - return rc; -} - -/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ -#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) - -static void get_max_endpoint(struct usb_device *udev, - struct usb_host_interface *alt, - char *msgtype, - struct usb_host_endpoint *curr_e, - struct tm6000_endpoint *tm_ep) -{ - u16 tmp = le16_to_cpu(curr_e->desc.wMaxPacketSize); - unsigned int size = tmp & 0x7ff; - - if (udev->speed == USB_SPEED_HIGH) - size = size * hb_mult(tmp); - - if (size > tm_ep->maxsize) { - tm_ep->endp = curr_e; - tm_ep->maxsize = size; - tm_ep->bInterfaceNumber = alt->desc.bInterfaceNumber; - tm_ep->bAlternateSetting = alt->desc.bAlternateSetting; - - printk(KERN_INFO "tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n", - msgtype, curr_e->desc.bEndpointAddress, - size); - } -} - -/* - * tm6000_usb_probe() - * checks for supported devices - */ -static int tm6000_usb_probe(struct usb_interface *interface, - const struct usb_device_id *id) -{ - struct usb_device *usbdev; - struct tm6000_core *dev = NULL; - int i, rc = 0; - int nr = 0; - char *speed; - - usbdev = usb_get_dev(interface_to_usbdev(interface)); - - /* Selects the proper interface */ - rc = usb_set_interface(usbdev, 0, 1); - if (rc < 0) - goto err; - - /* Check to see next free device and mark as used */ - nr = find_first_zero_bit(&tm6000_devused, TM6000_MAXBOARDS); - if (nr >= TM6000_MAXBOARDS) { - printk(KERN_ERR "tm6000: Supports only %i tm60xx boards.\n", TM6000_MAXBOARDS); - usb_put_dev(usbdev); - return -ENOMEM; - } - - /* Create and initialize dev struct */ - dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (dev == NULL) { - printk(KERN_ERR "tm6000" ": out of memory!\n"); - usb_put_dev(usbdev); - return -ENOMEM; - } - spin_lock_init(&dev->slock); - - /* Increment usage count */ - tm6000_devused |= 1<<nr; - snprintf(dev->name, 29, "tm6000 #%d", nr); - - dev->model = id->driver_info; - if ((card[nr] >= 0) && (card[nr] < ARRAY_SIZE(tm6000_boards))) - dev->model = card[nr]; - - dev->udev = usbdev; - dev->devno = nr; - - switch (usbdev->speed) { - case USB_SPEED_LOW: - speed = "1.5"; - break; - case USB_SPEED_UNKNOWN: - case USB_SPEED_FULL: - speed = "12"; - break; - case USB_SPEED_HIGH: - speed = "480"; - break; - default: - speed = "unknown"; - } - - - - /* Get endpoints */ - for (i = 0; i < interface->num_altsetting; i++) { - int ep; - - for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) { - struct usb_host_endpoint *e; - int dir_out; - - e = &interface->altsetting[i].endpoint[ep]; - - dir_out = ((e->desc.bEndpointAddress & - USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); - - printk(KERN_INFO "tm6000: alt %d, interface %i, class %i\n", - i, - interface->altsetting[i].desc.bInterfaceNumber, - interface->altsetting[i].desc.bInterfaceClass); - - switch (e->desc.bmAttributes) { - case USB_ENDPOINT_XFER_BULK: - if (!dir_out) { - get_max_endpoint(usbdev, - &interface->altsetting[i], - "Bulk IN", e, - &dev->bulk_in); - } else { - get_max_endpoint(usbdev, - &interface->altsetting[i], - "Bulk OUT", e, - &dev->bulk_out); - } - break; - case USB_ENDPOINT_XFER_ISOC: - if (!dir_out) { - get_max_endpoint(usbdev, - &interface->altsetting[i], - "ISOC IN", e, - &dev->isoc_in); - } else { - get_max_endpoint(usbdev, - &interface->altsetting[i], - "ISOC OUT", e, - &dev->isoc_out); - } - break; - case USB_ENDPOINT_XFER_INT: - if (!dir_out) { - get_max_endpoint(usbdev, - &interface->altsetting[i], - "INT IN", e, - &dev->int_in); - } else { - get_max_endpoint(usbdev, - &interface->altsetting[i], - "INT OUT", e, - &dev->int_out); - } - break; - } - } - } - - - printk(KERN_INFO "tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n", - speed, - le16_to_cpu(dev->udev->descriptor.idVendor), - le16_to_cpu(dev->udev->descriptor.idProduct), - interface->altsetting->desc.bInterfaceNumber); - -/* check if the the device has the iso in endpoint at the correct place */ - if (!dev->isoc_in.endp) { - printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n"); - rc = -ENODEV; - - goto err; - } - - /* save our data pointer in this interface device */ - usb_set_intfdata(interface, dev); - - printk(KERN_INFO "tm6000: Found %s\n", tm6000_boards[dev->model].name); - - rc = tm6000_init_dev(dev); - - if (rc < 0) - goto err; - - return 0; - -err: - printk(KERN_ERR "tm6000: Error %d while registering\n", rc); - - tm6000_devused &= ~(1<<nr); - usb_put_dev(usbdev); - - kfree(dev); - return rc; -} - -/* - * tm6000_usb_disconnect() - * called when the device gets diconencted - * video device will be unregistered on v4l2_close in case it is still open - */ -static void tm6000_usb_disconnect(struct usb_interface *interface) -{ - struct tm6000_core *dev = usb_get_intfdata(interface); - usb_set_intfdata(interface, NULL); - - if (!dev) - return; - - printk(KERN_INFO "tm6000: disconnecting %s\n", dev->name); - - tm6000_ir_fini(dev); - - if (dev->gpio.power_led) { - switch (dev->model) { - case TM6010_BOARD_HAUPPAUGE_900H: - case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: - case TM6010_BOARD_TWINHAN_TU501: - /* Power led off */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.power_led, 0x01); - msleep(15); - break; - case TM6010_BOARD_BEHOLD_WANDER: - case TM6010_BOARD_BEHOLD_VOYAGER: - case TM6010_BOARD_BEHOLD_WANDER_LITE: - case TM6010_BOARD_BEHOLD_VOYAGER_LITE: - /* Power led off */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, - dev->gpio.power_led, 0x00); - msleep(15); - break; - } - } - tm6000_v4l2_unregister(dev); - - tm6000_i2c_unregister(dev); - - v4l2_device_unregister(&dev->v4l2_dev); - - dev->state |= DEV_DISCONNECTED; - - usb_put_dev(dev->udev); - - tm6000_close_extension(dev); - tm6000_remove_from_devlist(dev); - - kfree(dev); -} - -static struct usb_driver tm6000_usb_driver = { - .name = "tm6000", - .probe = tm6000_usb_probe, - .disconnect = tm6000_usb_disconnect, - .id_table = tm6000_id_table, -}; - -static int __init tm6000_module_init(void) -{ - int result; - - printk(KERN_INFO "tm6000" " v4l2 driver version %d.%d.%d loaded\n", - (TM6000_VERSION >> 16) & 0xff, - (TM6000_VERSION >> 8) & 0xff, TM6000_VERSION & 0xff); - - /* register this driver with the USB subsystem */ - result = usb_register(&tm6000_usb_driver); - if (result) - printk(KERN_ERR "tm6000" - " usb_register failed. Error number %d.\n", result); - - return result; -} - -static void __exit tm6000_module_exit(void) -{ - /* deregister at USB subsystem */ - usb_deregister(&tm6000_usb_driver); -} - -module_init(tm6000_module_init); -module_exit(tm6000_module_exit); - -MODULE_DESCRIPTION("Trident TVMaster TM5600/TM6000/TM6010 USB2 adapter"); -MODULE_AUTHOR("Mauro Carvalho Chehab"); -MODULE_LICENSE("GPL"); |