aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/host/xhci-mem.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/xhci-mem.c')
-rw-r--r--drivers/usb/host/xhci-mem.c26
1 files changed, 24 insertions, 2 deletions
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index fd9e03afd91..2eb658d2639 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -835,6 +835,27 @@ fail:
return 0;
}
+void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
+ struct usb_device *udev)
+{
+ struct xhci_virt_device *virt_dev;
+ struct xhci_ep_ctx *ep0_ctx;
+ struct xhci_ring *ep_ring;
+
+ virt_dev = xhci->devs[udev->slot_id];
+ ep0_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, 0);
+ ep_ring = virt_dev->eps[0].ring;
+ /*
+ * FIXME we don't keep track of the dequeue pointer very well after a
+ * Set TR dequeue pointer, so we're setting the dequeue pointer of the
+ * host to our enqueue pointer. This should only be called after a
+ * configured device has reset, so all control transfers should have
+ * been completed or cancelled before the reset.
+ */
+ ep0_ctx->deq = xhci_trb_virt_to_dma(ep_ring->enq_seg, ep_ring->enqueue);
+ ep0_ctx->deq |= ep_ring->cycle_state;
+}
+
/* Setup an xHCI virtual device for a Set Address command */
int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev)
{
@@ -1002,7 +1023,7 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
return EP_INTERVAL(interval);
}
-/* The "Mult" field in the endpoint context is only set for SuperSpeed devices.
+/* The "Mult" field in the endpoint context is only set for SuperSpeed isoc eps.
* High speed endpoint descriptors can define "the number of additional
* transaction opportunities per microframe", but that goes in the Max Burst
* endpoint context field.
@@ -1010,7 +1031,8 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
static inline u32 xhci_get_endpoint_mult(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
- if (udev->speed != USB_SPEED_SUPER)
+ if (udev->speed != USB_SPEED_SUPER ||
+ !usb_endpoint_xfer_isoc(&ep->desc))
return 0;
return ep->ss_ep_comp.bmAttributes;
}