diff options
Diffstat (limited to 'drivers/usb/serial')
41 files changed, 885 insertions, 1974 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 17b7f9ae36a..1d55762afbb 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -4,7 +4,7 @@ menuconfig USB_SERIAL tristate "USB Serial Converter support" - depends on USB && TTY + depends on TTY ---help--- Say Y here if you have a USB device that provides normal serial ports, or acts like a serial device, and you want to connect it to @@ -667,6 +667,23 @@ config USB_SERIAL_ZIO To compile this driver as a module, choose M here: the module will be called zio. +config USB_SERIAL_WISHBONE + tristate "USB-Wishbone adapter interface driver" + help + Say Y here if you want to use a USB attached Wishbone bus. + + Wishbone is an open hardware SoC bus commonly used in FPGA + designs. Bus access can be serialized using the Etherbone + protocol <http://www.ohwr.org/projects/etherbone-core>. + + This driver is intended to be used with devices which attach + their internal Wishbone bus to a USB serial interface using + the Etherbone protocol. A userspace library is required to + speak the protocol made available by this driver as ttyUSBx. + + To compile this driver as a module, choose M here: the + module will be called wishbone-serial. + config USB_SERIAL_ZTE tristate "ZTE USB serial driver" help diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index eaf5ca14dfe..cec63fa1910 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -58,6 +58,7 @@ obj-$(CONFIG_USB_SERIAL_SYMBOL) += symbolserial.o obj-$(CONFIG_USB_SERIAL_WWAN) += usb_wwan.o obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o obj-$(CONFIG_USB_SERIAL_VISOR) += visor.o +obj-$(CONFIG_USB_SERIAL_WISHBONE) += wishbone-serial.o obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o obj-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda.o obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL) += vivopay-serial.o diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 4775f8209e5..3b16118cbf6 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -62,7 +62,6 @@ static int is_irda(struct usb_serial *serial) } struct ark3116_private { - struct async_icount icount; int irda; /* 1 for irda device */ /* protects hw register updates */ @@ -341,18 +340,15 @@ static void ark3116_close(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; - if (serial->dev) { - /* disable DMA */ - ark3116_write_reg(serial, UART_FCR, 0); - - /* deactivate interrupts */ - ark3116_write_reg(serial, UART_IER, 0); + /* disable DMA */ + ark3116_write_reg(serial, UART_FCR, 0); - usb_serial_generic_close(port); - if (serial->num_interrupt_in) - usb_kill_urb(port->interrupt_in_urb); - } + /* deactivate interrupts */ + ark3116_write_reg(serial, UART_IER, 0); + usb_serial_generic_close(port); + if (serial->num_interrupt_in) + usb_kill_urb(port->interrupt_in_urb); } static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port) @@ -405,31 +401,10 @@ err_out: return result; } -static int ark3116_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct usb_serial_port *port = tty->driver_data; - struct ark3116_private *priv = usb_get_serial_port_data(port); - struct async_icount cnow = priv->icount; - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - return 0; -} - static int ark3116_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; - struct ark3116_private *priv = usb_get_serial_port_data(port); struct serial_struct serstruct; void __user *user_arg = (void __user *)arg; @@ -451,33 +426,6 @@ static int ark3116_ioctl(struct tty_struct *tty, if (copy_from_user(&serstruct, user_arg, sizeof(serstruct))) return -EFAULT; return 0; - case TIOCMIWAIT: - for (;;) { - struct async_icount prev = priv->icount; - interruptible_sleep_on(&port->delta_msr_wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - - if (port->serial->disconnected) - return -EIO; - - if ((prev.rng == priv->icount.rng) && - (prev.dsr == priv->icount.dsr) && - (prev.dcd == priv->icount.dcd) && - (prev.cts == priv->icount.cts)) - return -EIO; - if ((arg & TIOCM_RNG && - (prev.rng != priv->icount.rng)) || - (arg & TIOCM_DSR && - (prev.dsr != priv->icount.dsr)) || - (arg & TIOCM_CD && - (prev.dcd != priv->icount.dcd)) || - (arg & TIOCM_CTS && - (prev.cts != priv->icount.cts))) - return 0; - } - break; } return -ENOIOCTLCMD; @@ -575,14 +523,14 @@ static void ark3116_update_msr(struct usb_serial_port *port, __u8 msr) if (msr & UART_MSR_ANY_DELTA) { /* update input line counters */ if (msr & UART_MSR_DCTS) - priv->icount.cts++; + port->icount.cts++; if (msr & UART_MSR_DDSR) - priv->icount.dsr++; + port->icount.dsr++; if (msr & UART_MSR_DDCD) - priv->icount.dcd++; + port->icount.dcd++; if (msr & UART_MSR_TERI) - priv->icount.rng++; - wake_up_interruptible(&port->delta_msr_wait); + port->icount.rng++; + wake_up_interruptible(&port->port.delta_msr_wait); } } @@ -598,13 +546,13 @@ static void ark3116_update_lsr(struct usb_serial_port *port, __u8 lsr) if (lsr&UART_LSR_BRK_ERROR_BITS) { if (lsr & UART_LSR_BI) - priv->icount.brk++; + port->icount.brk++; if (lsr & UART_LSR_FE) - priv->icount.frame++; + port->icount.frame++; if (lsr & UART_LSR_PE) - priv->icount.parity++; + port->icount.parity++; if (lsr & UART_LSR_OE) - priv->icount.overrun++; + port->icount.overrun++; } } @@ -722,7 +670,8 @@ static struct usb_serial_driver ark3116_device = { .ioctl = ark3116_ioctl, .tiocmget = ark3116_tiocmget, .tiocmset = ark3116_tiocmset, - .get_icount = ark3116_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .open = ark3116_open, .close = ark3116_close, .break_ctl = ark3116_break_ctl, diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 37decb13d7e..3c4db6d196c 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -106,14 +106,15 @@ static int usb_serial_device_remove(struct device *dev) /* make sure suspend/resume doesn't race against port_remove */ usb_autopm_get_interface(port->serial->interface); + minor = port->number; + tty_unregister_device(usb_serial_tty_driver, minor); + device_remove_file(&port->dev, &dev_attr_port_number); driver = port->serial->type; if (driver->port_remove) retval = driver->port_remove(port); - minor = port->number; - tty_unregister_device(usb_serial_tty_driver, minor); dev_info(dev, "%s converter now disconnected from ttyUSB%d\n", driver->description, minor); diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 07d4650a32a..c2a4171ab9c 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -296,7 +296,6 @@ static void ch341_dtr_rts(struct usb_serial_port *port, int on) priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR); spin_unlock_irqrestore(&priv->lock, flags); ch341_set_handshake(port->serial->dev, priv->line_control); - wake_up_interruptible(&port->delta_msr_wait); } static void ch341_close(struct usb_serial_port *port) @@ -489,7 +488,7 @@ static void ch341_read_int_callback(struct urb *urb) tty_kref_put(tty); } - wake_up_interruptible(&port->delta_msr_wait); + wake_up_interruptible(&port->port.delta_msr_wait); } exit: @@ -500,8 +499,9 @@ exit: __func__, status); } -static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) +static int ch341_tiocmiwait(struct tty_struct *tty, unsigned long arg) { + struct usb_serial_port *port = tty->driver_data; struct ch341_private *priv = usb_get_serial_port_data(port); unsigned long flags; u8 prevstatus; @@ -515,7 +515,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) spin_unlock_irqrestore(&priv->lock, flags); while (!multi_change) { - interruptible_sleep_on(&port->delta_msr_wait); + interruptible_sleep_on(&port->port.delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; @@ -542,26 +542,6 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) return 0; } -static int ch341_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct usb_serial_port *port = tty->driver_data; - - dev_dbg(&port->dev, "%s (%d) cmd = 0x%04x\n", __func__, port->number, cmd); - - switch (cmd) { - case TIOCMIWAIT: - dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__, port->number); - return wait_modem_info(port, arg); - - default: - dev_dbg(&port->dev, "%s not supported = 0x%04x\n", __func__, cmd); - break; - } - - return -ENOIOCTLCMD; -} - static int ch341_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; @@ -611,11 +591,11 @@ static struct usb_serial_driver ch341_device = { .dtr_rts = ch341_dtr_rts, .carrier_raised = ch341_carrier_raised, .close = ch341_close, - .ioctl = ch341_ioctl, .set_termios = ch341_set_termios, .break_ctl = ch341_break_ctl, .tiocmget = ch341_tiocmget, .tiocmset = ch341_tiocmset, + .tiocmiwait = ch341_tiocmiwait, .read_int_callback = ch341_read_int_callback, .port_probe = ch341_port_probe, .port_remove = ch341_port_remove, diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 4747d1c328f..2c659553c07 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -462,11 +462,7 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port) static void cp210x_close(struct usb_serial_port *port) { usb_serial_generic_close(port); - - mutex_lock(&port->serial->disc_mutex); - if (!port->serial->disconnected) - cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE); - mutex_unlock(&port->serial->disc_mutex); + cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE); } /* diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 629bd289450..781426230d6 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -51,7 +51,6 @@ #define CYBERJACK_PRODUCT_ID 0x0100 /* Function prototypes */ -static void cyberjack_disconnect(struct usb_serial *serial); static int cyberjack_port_probe(struct usb_serial_port *port); static int cyberjack_port_remove(struct usb_serial_port *port); static int cyberjack_open(struct tty_struct *tty, @@ -79,7 +78,6 @@ static struct usb_serial_driver cyberjack_device = { .description = "Reiner SCT Cyberjack USB card reader", .id_table = id_table, .num_ports = 1, - .disconnect = cyberjack_disconnect, .port_probe = cyberjack_port_probe, .port_remove = cyberjack_port_remove, .open = cyberjack_open, @@ -130,20 +128,14 @@ static int cyberjack_port_remove(struct usb_serial_port *port) { struct cyberjack_private *priv; + usb_kill_urb(port->interrupt_in_urb); + priv = usb_get_serial_port_data(port); kfree(priv); return 0; } -static void cyberjack_disconnect(struct usb_serial *serial) -{ - int i; - - for (i = 0; i < serial->num_ports; ++i) - usb_kill_urb(serial->port[i]->interrupt_in_urb); -} - static int cyberjack_open(struct tty_struct *tty, struct usb_serial_port *port) { @@ -166,11 +158,8 @@ static int cyberjack_open(struct tty_struct *tty, static void cyberjack_close(struct usb_serial_port *port) { - if (port->serial->dev) { - /* shutdown any bulk reads that might be going on */ - usb_kill_urb(port->write_urb); - usb_kill_urb(port->read_urb); - } + usb_kill_urb(port->write_urb); + usb_kill_urb(port->read_urb); } static int cyberjack_write(struct tty_struct *tty, diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index ba7352e4187..d341555d37d 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -129,13 +129,12 @@ static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static void cypress_send(struct usb_serial_port *port); static int cypress_write_room(struct tty_struct *tty); -static int cypress_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg); static void cypress_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); static int cypress_tiocmget(struct tty_struct *tty); static int cypress_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); +static int cypress_tiocmiwait(struct tty_struct *tty, unsigned long arg); static int cypress_chars_in_buffer(struct tty_struct *tty); static void cypress_throttle(struct tty_struct *tty); static void cypress_unthrottle(struct tty_struct *tty); @@ -158,10 +157,10 @@ static struct usb_serial_driver cypress_earthmate_device = { .dtr_rts = cypress_dtr_rts, .write = cypress_write, .write_room = cypress_write_room, - .ioctl = cypress_ioctl, .set_termios = cypress_set_termios, .tiocmget = cypress_tiocmget, .tiocmset = cypress_tiocmset, + .tiocmiwait = cypress_tiocmiwait, .chars_in_buffer = cypress_chars_in_buffer, .throttle = cypress_throttle, .unthrottle = cypress_unthrottle, @@ -184,10 +183,10 @@ static struct usb_serial_driver cypress_hidcom_device = { .dtr_rts = cypress_dtr_rts, .write = cypress_write, .write_room = cypress_write_room, - .ioctl = cypress_ioctl, .set_termios = cypress_set_termios, .tiocmget = cypress_tiocmget, .tiocmset = cypress_tiocmset, + .tiocmiwait = cypress_tiocmiwait, .chars_in_buffer = cypress_chars_in_buffer, .throttle = cypress_throttle, .unthrottle = cypress_unthrottle, @@ -210,10 +209,10 @@ static struct usb_serial_driver cypress_ca42v2_device = { .dtr_rts = cypress_dtr_rts, .write = cypress_write, .write_room = cypress_write_room, - .ioctl = cypress_ioctl, .set_termios = cypress_set_termios, .tiocmget = cypress_tiocmget, .tiocmset = cypress_tiocmset, + .tiocmiwait = cypress_tiocmiwait, .chars_in_buffer = cypress_chars_in_buffer, .throttle = cypress_throttle, .unthrottle = cypress_unthrottle, @@ -633,12 +632,6 @@ static void cypress_close(struct usb_serial_port *port) struct cypress_private *priv = usb_get_serial_port_data(port); unsigned long flags; - /* writing is potentially harmful, lock must be taken */ - mutex_lock(&port->serial->disc_mutex); - if (port->serial->disconnected) { - mutex_unlock(&port->serial->disc_mutex); - return; - } spin_lock_irqsave(&priv->lock, flags); kfifo_reset_out(&priv->write_fifo); spin_unlock_irqrestore(&priv->lock, flags); @@ -650,7 +643,6 @@ static void cypress_close(struct usb_serial_port *port) if (stats) dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n", priv->bytes_in, priv->bytes_out, priv->cmd_count); - mutex_unlock(&port->serial->disc_mutex); } /* cypress_close */ @@ -855,55 +847,43 @@ static int cypress_tiocmset(struct tty_struct *tty, } -static int cypress_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) +static int cypress_tiocmiwait(struct tty_struct *tty, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; struct cypress_private *priv = usb_get_serial_port_data(port); - - dev_dbg(&port->dev, "%s - port %d, cmd 0x%.4x\n", __func__, port->number, cmd); - - switch (cmd) { - /* This code comes from drivers/char/serial.c and ftdi_sio.c */ - case TIOCMIWAIT: - for (;;) { - interruptible_sleep_on(&port->delta_msr_wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - - if (port->serial->disconnected) - return -EIO; - - { - char diff = priv->diff_status; - if (diff == 0) - return -EIO; /* no change => error */ - - /* consume all events */ - priv->diff_status = 0; - - /* return 0 if caller wanted to know about - these bits */ - if (((arg & TIOCM_RNG) && (diff & UART_RI)) || - ((arg & TIOCM_DSR) && (diff & UART_DSR)) || - ((arg & TIOCM_CD) && (diff & UART_CD)) || - ((arg & TIOCM_CTS) && (diff & UART_CTS))) - return 0; - /* otherwise caller can't care less about what - * happened, and so we continue to wait for - * more events. - */ - } - } - return 0; - default: - break; + char diff; + + for (;;) { + interruptible_sleep_on(&port->port.delta_msr_wait); + /* see if a signal did it */ + if (signal_pending(current)) + return -ERESTARTSYS; + + if (port->serial->disconnected) + return -EIO; + + diff = priv->diff_status; + if (diff == 0) + return -EIO; /* no change => error */ + + /* consume all events */ + priv->diff_status = 0; + + /* return 0 if caller wanted to know about + these bits */ + if (((arg & TIOCM_RNG) && (diff & UART_RI)) || + ((arg & TIOCM_DSR) && (diff & UART_DSR)) || + ((arg & TIOCM_CD) && (diff & UART_CD)) || + ((arg & TIOCM_CTS) && (diff & UART_CTS))) + return 0; + /* otherwise caller can't care less about what + * happened, and so we continue to wait for + * more events. + */ } - dev_dbg(&port->dev, "%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h\n", __func__, cmd); - return -ENOIOCTLCMD; -} /* cypress_ioctl */ + return 0; +} static void cypress_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) @@ -1189,7 +1169,7 @@ static void cypress_read_int_callback(struct urb *urb) if (priv->current_status != priv->prev_status) { priv->diff_status |= priv->current_status ^ priv->prev_status; - wake_up_interruptible(&port->delta_msr_wait); + wake_up_interruptible(&port->port.delta_msr_wait); priv->prev_status = priv->current_status; } spin_unlock_irqrestore(&priv->lock, flags); diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 31191581060..7b807d38952 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -196,7 +196,6 @@ struct digi_port { unsigned char dp_out_buf[DIGI_OUT_BUF_SIZE]; int dp_write_urb_in_use; unsigned int dp_modem_signals; - wait_queue_head_t dp_modem_change_wait; int dp_transmit_idle; wait_queue_head_t dp_transmit_idle_wait; int dp_throttled; @@ -1138,53 +1137,51 @@ static void digi_close(struct usb_serial_port *port) if (port->serial->disconnected) goto exit; - if (port->serial->dev) { - /* FIXME: Transmit idle belongs in the wait_unti_sent path */ - digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT); - - /* disable input flow control */ - buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL; - buf[1] = priv->dp_port_num; - buf[2] = DIGI_DISABLE; - buf[3] = 0; - - /* disable output flow control */ - buf[4] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL; - buf[5] = priv->dp_port_num; - buf[6] = DIGI_DISABLE; - buf[7] = 0; - - /* disable reading modem signals automatically */ - buf[8] = DIGI_CMD_READ_INPUT_SIGNALS; - buf[9] = priv->dp_port_num; - buf[10] = DIGI_DISABLE; - buf[11] = 0; - - /* disable receive */ - buf[12] = DIGI_CMD_RECEIVE_ENABLE; - buf[13] = priv->dp_port_num; - buf[14] = DIGI_DISABLE; - buf[15] = 0; - - /* flush fifos */ - buf[16] = DIGI_CMD_IFLUSH_FIFO; - buf[17] = priv->dp_port_num; - buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX; - buf[19] = 0; - - ret = digi_write_oob_command(port, buf, 20, 0); - if (ret != 0) - dev_dbg(&port->dev, "digi_close: write oob failed, ret=%d\n", ret); - - /* wait for final commands on oob port to complete */ - prepare_to_wait(&priv->dp_flush_wait, &wait, - TASK_INTERRUPTIBLE); - schedule_timeout(DIGI_CLOSE_TIMEOUT); - finish_wait(&priv->dp_flush_wait, &wait); - - /* shutdown any outstanding bulk writes */ - usb_kill_urb(port->write_urb); - } + /* FIXME: Transmit idle belongs in the wait_unti_sent path */ + digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT); + + /* disable input flow control */ + buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL; + buf[1] = priv->dp_port_num; + buf[2] = DIGI_DISABLE; + buf[3] = 0; + + /* disable output flow control */ + buf[4] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL; + buf[5] = priv->dp_port_num; + buf[6] = DIGI_DISABLE; + buf[7] = 0; + + /* disable reading modem signals automatically */ + buf[8] = DIGI_CMD_READ_INPUT_SIGNALS; + buf[9] = priv->dp_port_num; + buf[10] = DIGI_DISABLE; + buf[11] = 0; + + /* disable receive */ + buf[12] = DIGI_CMD_RECEIVE_ENABLE; + buf[13] = priv->dp_port_num; + buf[14] = DIGI_DISABLE; + buf[15] = 0; + + /* flush fifos */ + buf[16] = DIGI_CMD_IFLUSH_FIFO; + buf[17] = priv->dp_port_num; + buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX; + buf[19] = 0; + + ret = digi_write_oob_command(port, buf, 20, 0); + if (ret != 0) + dev_dbg(&port->dev, "digi_close: write oob failed, ret=%d\n", + ret); + /* wait for final commands on oob port to complete */ + prepare_to_wait(&priv->dp_flush_wait, &wait, + TASK_INTERRUPTIBLE); + schedule_timeout(DIGI_CLOSE_TIMEOUT); + finish_wait(&priv->dp_flush_wait, &wait); + + /* shutdown any outstanding bulk writes */ + usb_kill_urb(port->write_urb); exit: spin_lock_irq(&priv->dp_port_lock); priv->dp_write_urb_in_use = 0; @@ -1241,7 +1238,6 @@ static int digi_port_init(struct usb_serial_port *port, unsigned port_num) spin_lock_init(&priv->dp_port_lock); priv->dp_port_num = port_num; - init_waitqueue_head(&priv->dp_modem_change_wait); init_waitqueue_head(&priv->dp_transmit_idle_wait); init_waitqueue_head(&priv->dp_flush_wait); init_waitqueue_head(&priv->dp_close_wait); @@ -1532,7 +1528,6 @@ static int digi_read_oob_callback(struct urb *urb) else priv->dp_modem_signals &= ~TIOCM_CD; - wake_up_interruptible(&priv->dp_modem_change_wait); spin_unlock(&priv->dp_port_lock); } else if (opcode == DIGI_CMD_TRANSMIT_IDLE) { spin_lock(&priv->dp_port_lock); diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index a172ad5c5ce..090b411d893 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -110,7 +110,7 @@ static void f81232_process_read_urb(struct urb *urb) line_status = priv->line_status; priv->line_status &= ~UART_STATE_TRANSIENT_MASK; spin_unlock_irqrestore(&priv->lock, flags); - wake_up_interruptible(&port->delta_msr_wait); + wake_up_interruptible(&port->port.delta_msr_wait); if (!urb->actual_length) return; @@ -242,8 +242,9 @@ static int f81232_carrier_raised(struct usb_serial_port *port) return 0; } -static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) +static int f81232_tiocmiwait(struct tty_struct *tty, unsigned long arg) { + struct usb_serial_port *port = tty->driver_data; struct f81232_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int prevstatus; @@ -255,7 +256,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) spin_unlock_irqrestore(&priv->lock, flags); while (1) { - interruptible_sleep_on(&port->delta_msr_wait); + interruptible_sleep_on(&port->port.delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; @@ -302,11 +303,6 @@ static int f81232_ioctl(struct tty_struct *tty, return -EFAULT; return 0; - - case TIOCMIWAIT: - dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__, - port->number); - return wait_modem_info(port, arg); default: dev_dbg(&port->dev, "%s not supported = 0x%04x\n", __func__, cmd); @@ -358,6 +354,7 @@ static struct usb_serial_driver f81232_device = { .set_termios = f81232_set_termios, .tiocmget = f81232_tiocmget, .tiocmset = f81232_tiocmset, + .tiocmiwait = f81232_tiocmiwait, .process_read_urb = f81232_process_read_urb, .read_int_callback = f81232_read_int_callback, .port_probe = f81232_port_probe, diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 9886180e45f..242b5776648 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1,7 +1,7 @@ /* * USB FTDI SIO driver * - * Copyright (C) 2009 - 2010 + * Copyright (C) 2009 - 2013 * Johan Hovold (jhovold@gmail.com) * Copyright (C) 1999 - 2001 * Greg Kroah-Hartman (greg@kroah.com) @@ -55,7 +55,6 @@ static __u16 vendor = FTDI_VID; static __u16 product; struct ftdi_private { - struct kref kref; enum ftdi_chip_type chip_type; /* type of device, either SIO or FT8U232AM */ int baud_base; /* baud base clock for divisor setting */ @@ -68,7 +67,6 @@ struct ftdi_private { */ int flags; /* some ASYNC_xxxx flags are supported */ unsigned long last_dtr_rts; /* saved modem control outputs */ - struct async_icount icount; char prev_status; /* Used for TIOCMIWAIT */ char transmit_empty; /* If transmitter is empty or not */ __u16 interface; /* FT2232C, FT2232H or FT4232H port interface @@ -189,6 +187,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) }, { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) }, { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_BOOST_PID) }, { USB_DEVICE(NEWPORT_VID, NEWPORT_AGILIS_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, @@ -870,7 +869,9 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) }, { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, - { USB_DEVICE(ST_VID, ST_STMCLT1030_PID), + { USB_DEVICE(ST_VID, ST_STMCLT_2232_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(ST_VID, ST_STMCLT_4232_PID), .driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk }, { USB_DEVICE(FTDI_VID, FTDI_RF_R106) }, { USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID), @@ -911,7 +912,6 @@ static int ftdi_sio_probe(struct usb_serial *serial, static int ftdi_sio_port_probe(struct usb_serial_port *port); static int ftdi_sio_port_remove(struct usb_serial_port *port); static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port); -static void ftdi_close(struct usb_serial_port *port); static void ftdi_dtr_rts(struct usb_serial_port *port, int on); static void ftdi_process_read_urb(struct urb *urb); static int ftdi_prepare_write_buffer(struct usb_serial_port *port, @@ -921,8 +921,6 @@ static void ftdi_set_termios(struct tty_struct *tty, static int ftdi_tiocmget(struct tty_struct *tty); static int ftdi_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); -static int ftdi_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount); static int ftdi_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void ftdi_break_ctl(struct tty_struct *tty, int break_state); @@ -951,7 +949,6 @@ static struct usb_serial_driver ftdi_sio_device = { .port_probe = ftdi_sio_port_probe, .port_remove = ftdi_sio_port_remove, .open = ftdi_open, - .close = ftdi_close, .dtr_rts = ftdi_dtr_rts, .throttle = usb_serial_generic_throttle, .unthrottle = usb_serial_generic_unthrottle, @@ -959,7 +956,8 @@ static struct usb_serial_driver ftdi_sio_device = { .prepare_write_buffer = ftdi_prepare_write_buffer, .tiocmget = ftdi_tiocmget, .tiocmset = ftdi_tiocmset, - .get_icount = ftdi_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .ioctl = ftdi_ioctl, .set_termios = ftdi_set_termios, .break_ctl = ftdi_break_ctl, @@ -1688,7 +1686,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) return -ENOMEM; } - kref_init(&priv->kref); mutex_init(&priv->cfg_lock); priv->flags = ASYNC_LOW_LATENCY; @@ -1792,20 +1789,24 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial) } /* - * First and second port on STMCLiteadaptors is reserved for JTAG interface - * and the forth port for pio + * First two ports on JTAG adaptors using an FT4232 such as STMicroelectronics's + * ST Micro Connect Lite are reserved for JTAG or other non-UART interfaces and + * can be accessed from userspace. + * The next two ports are enabled as UARTs by default, where port 2 is + * a conventional RS-232 UART. */ static int ftdi_stmclite_probe(struct usb_serial *serial) { struct usb_device *udev = serial->dev; struct usb_interface *interface = serial->interface; - if (interface == udev->actconfig->interface[2]) - return 0; - - dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n"); + if (interface == udev->actconfig->interface[0] || + interface == udev->actconfig->interface[1]) { + dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n"); + return -ENODEV; + } - return -ENODEV; + return 0; } /* @@ -1826,22 +1827,13 @@ static int ftdi_mtxorb_hack_setup(struct usb_serial *serial) return 0; } -static void ftdi_sio_priv_release(struct kref *k) -{ - struct ftdi_private *priv = container_of(k, struct ftdi_private, kref); - - kfree(priv); -} - static int ftdi_sio_port_remove(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); - wake_up_interruptible(&port->delta_msr_wait); - remove_sysfs_attrs(port); - kref_put(&priv->kref, ftdi_sio_priv_release); + kfree(priv); return 0; } @@ -1851,7 +1843,6 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) struct ktermios dummy; struct usb_device *dev = port->serial->dev; struct ftdi_private *priv = usb_get_serial_port_data(port); - int result; /* No error checking for this (will get errors later anyway) */ /* See ftdi_sio.h for description of what is reset */ @@ -1870,12 +1861,7 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) ftdi_set_termios(tty, port, &dummy); } - /* Start reading from the device */ - result = usb_serial_generic_open(tty, port); - if (!result) - kref_get(&priv->kref); - - return result; + return usb_serial_generic_open(tty, port); } static void ftdi_dtr_rts(struct usb_serial_port *port, int on) @@ -1900,19 +1886,6 @@ static void ftdi_dtr_rts(struct usb_serial_port *port, int on) clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); } -/* - * usbserial:__serial_close only calls ftdi_close if the point is open - * - * This only gets called when it is the last close - */ -static void ftdi_close(struct usb_serial_port *port) -{ - struct ftdi_private *priv = usb_get_serial_port_data(port); - - usb_serial_generic_close(port); - kref_put(&priv->kref, ftdi_sio_priv_release); -} - /* The SIO requires the first byte to have: * B0 1 * B1 0 @@ -1940,7 +1913,7 @@ static int ftdi_prepare_write_buffer(struct usb_serial_port *port, c = kfifo_out(&port->write_fifo, &buffer[i + 1], len); if (!c) break; - priv->icount.tx += c; + port->icount.tx += c; buffer[i] = (c << 2) + 1; count += c + 1; } @@ -1948,7 +1921,7 @@ static int ftdi_prepare_write_buffer(struct usb_serial_port *port, } else { count = kfifo_out_locked(&port->write_fifo, dest, size, &port->lock); - priv->icount.tx += count; + port->icount.tx += count; } return count; @@ -1977,15 +1950,15 @@ static int ftdi_process_packet(struct usb_serial_port *port, char diff_status = status ^ priv->prev_status; if (diff_status & FTDI_RS0_CTS) - priv->icount.cts++; + port->icount.cts++; if (diff_status & FTDI_RS0_DSR) - priv->icount.dsr++; + port->icount.dsr++; if (diff_status & FTDI_RS0_RI) - priv->icount.rng++; + port->icount.rng++; if (diff_status & FTDI_RS0_RLSD) - priv->icount.dcd++; + port->icount.dcd++; - wake_up_interruptible(&port->delta_msr_wait); + wake_up_interruptible(&port->port.delta_msr_wait); priv->prev_status = status; } @@ -1995,18 +1968,18 @@ static int ftdi_process_packet(struct usb_serial_port *port, * over framing errors */ if (packet[1] & FTDI_RS_BI) { flag = TTY_BREAK; - priv->icount.brk++; + port->icount.brk++; usb_serial_handle_break(port); } else if (packet[1] & FTDI_RS_PE) { flag = TTY_PARITY; - priv->icount.parity++; + port->icount.parity++; } else if (packet[1] & FTDI_RS_FE) { flag = TTY_FRAME; - priv->icount.frame++; + port->icount.frame++; } /* Overrun is special, not associated with a char */ if (packet[1] & FTDI_RS_OE) { - priv->icount.overrun++; + port->icount.overrun++; tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); } } @@ -2020,7 +1993,7 @@ static int ftdi_process_packet(struct usb_serial_port *port, len -= 2; if (!len) return 0; /* status only */ - priv->icount.rx += len; + port->icount.rx += len; ch = packet + 2; if (port->port.console && port->sysrq) { @@ -2384,34 +2357,10 @@ static int ftdi_tiocmset(struct tty_struct *tty, return update_mctrl(port, set, clear); } -static int ftdi_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct usb_serial_port *port = tty->driver_data; - struct ftdi_private *priv = usb_get_serial_port_data(port); - struct async_icount *ic = &priv->icount; - - icount->cts = ic->cts; - icount->dsr = ic->dsr; - icount->rng = ic->rng; - icount->dcd = ic->dcd; - icount->tx = ic->tx; - icount->rx = ic->rx; - icount->frame = ic->frame; - icount->parity = ic->parity; - icount->overrun = ic->overrun; - icount->brk = ic->brk; - icount->buf_overrun = ic->buf_overrun; - return 0; -} - static int ftdi_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; - struct ftdi_private *priv = usb_get_serial_port_data(port); - struct async_icount cnow; - struct async_icount cprev; dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd); @@ -2425,35 +2374,6 @@ static int ftdi_ioctl(struct tty_struct *tty, case TIOCSSERIAL: /* sets serial port data */ return set_serial_info(tty, port, (struct serial_struct __user *) arg); - - /* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - * - mask passed in arg for lines of interest - * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) - * Caller should use TIOCGICOUNT to see which one it was. - * - * This code is borrowed from linux/drivers/char/serial.c - */ - case TIOCMIWAIT: - cprev = priv->icount; - for (;;) { - interruptible_sleep_on(&port->delta_msr_wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - - if (port->serial->disconnected) - return -EIO; - - cnow = priv->icount; - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { - return 0; - } - cprev = cnow; - } case TIOCSERGETLSR: return get_lsr_info(port, (struct serial_struct __user *)arg); break; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index e79861eeed4..98528270c43 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -74,6 +74,7 @@ #define FTDI_OPENDCC_THROTTLE_PID 0xBFDA #define FTDI_OPENDCC_GATEWAY_PID 0xBFDB #define FTDI_OPENDCC_GBM_PID 0xBFDC +#define FTDI_OPENDCC_GBM_BOOST_PID 0xBFDD /* NZR SEM 16+ USB (http://www.nzr.de) */ #define FTDI_NZR_SEM_USB_PID 0xC1E0 /* NZR SEM-LOG16+ */ @@ -1150,7 +1151,8 @@ * STMicroelectonics */ #define ST_VID 0x0483 -#define ST_STMCLT1030_PID 0x3747 /* ST Micro Connect Lite STMCLT1030 */ +#define ST_STMCLT_2232_PID 0x3746 +#define ST_STMCLT_4232_PID 0x3747 /* * Papouch products (http://www.papouch.com/) diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 81caf5623ee..b110c573ea8 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -946,16 +946,12 @@ static int garmin_open(struct tty_struct *tty, struct usb_serial_port *port) static void garmin_close(struct usb_serial_port *port) { - struct usb_serial *serial = port->serial; struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); dev_dbg(&port->dev, "%s - port %d - mode=%d state=%d flags=0x%X\n", __func__, port->number, garmin_data_p->mode, garmin_data_p->state, garmin_data_p->flags); - if (!serial) - return; - garmin_clear(garmin_data_p); /* shutdown our urbs */ @@ -1185,17 +1181,11 @@ static void garmin_read_bulk_callback(struct urb *urb) { unsigned long flags; struct usb_serial_port *port = urb->context; - struct usb_serial *serial = port->serial; struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); unsigned char *data = urb->transfer_buffer; int status = urb->status; int retval; - if (!serial) { - dev_dbg(&urb->dev->dev, "%s - bad serial pointer, exiting\n", __func__); - return; - } - if (status) { dev_dbg(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n", __func__, status); diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 4c5c23f1cae..297665fdd16 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -1,7 +1,7 @@ /* * USB Serial Converter Generic functions * - * Copyright (C) 2010 - 2011 Johan Hovold (jhovold@gmail.com) + * Copyright (C) 2010 - 2013 Johan Hovold (jhovold@gmail.com) * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com) * * This program is free software; you can redistribute it and/or @@ -45,8 +45,6 @@ struct usb_serial_driver usb_serial_generic_device = { }, .id_table = generic_device_ids, .num_ports = 1, - .disconnect = usb_serial_generic_disconnect, - .release = usb_serial_generic_release, .throttle = usb_serial_generic_throttle, .unthrottle = usb_serial_generic_unthrottle, .resume = usb_serial_generic_resume, @@ -102,32 +100,23 @@ int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port } EXPORT_SYMBOL_GPL(usb_serial_generic_open); -static void generic_cleanup(struct usb_serial_port *port) +void usb_serial_generic_close(struct usb_serial_port *port) { - struct usb_serial *serial = port->serial; unsigned long flags; int i; - if (serial->dev) { - /* shutdown any bulk transfers that might be going on */ - if (port->bulk_out_size) { - for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) - usb_kill_urb(port->write_urbs[i]); + if (port->bulk_out_size) { + for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) + usb_kill_urb(port->write_urbs[i]); - spin_lock_irqsave(&port->lock, flags); - kfifo_reset_out(&port->write_fifo); - spin_unlock_irqrestore(&port->lock, flags); - } - if (port->bulk_in_size) { - for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) - usb_kill_urb(port->read_urbs[i]); - } + spin_lock_irqsave(&port->lock, flags); + kfifo_reset_out(&port->write_fifo); + spin_unlock_irqrestore(&port->lock, flags); + } + if (port->bulk_in_size) { + for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) + usb_kill_urb(port->read_urbs[i]); } -} - -void usb_serial_generic_close(struct usb_serial_port *port) -{ - generic_cleanup(port); } EXPORT_SYMBOL_GPL(usb_serial_generic_close); @@ -272,8 +261,7 @@ static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port, if (!test_and_clear_bit(index, &port->read_urbs_free)) return 0; - dev_dbg(&port->dev, "%s - port %d, urb %d\n", __func__, - port->number, index); + dev_dbg(&port->dev, "%s - urb %d\n", __func__, index); res = usb_submit_urb(port->read_urbs[index], mem_flags); if (res) { @@ -347,8 +335,8 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb) } set_bit(i, &port->read_urbs_free); - dev_dbg(&port->dev, "%s - port %d, urb %d, len %d\n", - __func__, port->number, i, urb->actual_length); + dev_dbg(&port->dev, "%s - urb %d, len %d\n", __func__, i, + urb->actual_length); if (urb->status) { dev_dbg(&port->dev, "%s - non-zero urb status: %d\n", @@ -430,6 +418,91 @@ void usb_serial_generic_unthrottle(struct tty_struct *tty) } EXPORT_SYMBOL_GPL(usb_serial_generic_unthrottle); +static bool usb_serial_generic_msr_changed(struct tty_struct *tty, + unsigned long arg, struct async_icount *cprev) +{ + struct usb_serial_port *port = tty->driver_data; + struct async_icount cnow; + unsigned long flags; + bool ret; + + /* + * Use tty-port initialised flag to detect all hangups including the + * one generated at USB-device disconnect. + * + * FIXME: Remove hupping check once tty_port_hangup calls shutdown + * (which clears the initialised flag) before wake up. + */ + if (test_bit(TTY_HUPPING, &tty->flags)) + return true; + if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) + return true; + + spin_lock_irqsave(&port->lock, flags); + cnow = port->icount; /* atomic copy*/ + spin_unlock_irqrestore(&port->lock, flags); + + ret = ((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev->dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev->cts)); + + *cprev = cnow; + + return ret; +} + +int usb_serial_generic_tiocmiwait(struct tty_struct *tty, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + struct async_icount cnow; + unsigned long flags; + int ret; + + spin_lock_irqsave(&port->lock, flags); + cnow = port->icount; /* atomic copy */ + spin_unlock_irqrestore(&port->lock, flags); + + ret = wait_event_interruptible(port->port.delta_msr_wait, + usb_serial_generic_msr_changed(tty, arg, &cnow)); + if (!ret) { + if (test_bit(TTY_HUPPING, &tty->flags)) + ret = -EIO; + if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) + ret = -EIO; + } + + return ret; +} +EXPORT_SYMBOL_GPL(usb_serial_generic_tiocmiwait); + +int usb_serial_generic_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + struct usb_serial_port *port = tty->driver_data; + struct async_icount cnow; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + cnow = port->icount; /* atomic copy */ + spin_unlock_irqrestore(&port->lock, flags); + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->tx = cnow.tx; + icount->rx = cnow.rx; + icount->frame = cnow.frame; + icount->parity = cnow.parity; + icount->overrun = cnow.overrun; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + + return 0; +} +EXPORT_SYMBOL_GPL(usb_serial_generic_get_icount); + #ifdef CONFIG_MAGIC_SYSRQ int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch) { @@ -473,8 +546,7 @@ void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port, { struct tty_port *port = &usb_port->port; - dev_dbg(&usb_port->dev, "%s - port %d, status %d\n", __func__, - usb_port->number, status); + dev_dbg(&usb_port->dev, "%s - status %d\n", __func__, status); if (status) wake_up_interruptible(&port->open_wait); @@ -510,17 +582,3 @@ int usb_serial_generic_resume(struct usb_serial *serial) return c ? -EIO : 0; } EXPORT_SYMBOL_GPL(usb_serial_generic_resume); - -void usb_serial_generic_disconnect(struct usb_serial *serial) -{ - int i; - - /* stop reads and writes on all ports */ - for (i = 0; i < serial->num_ports; ++i) - generic_cleanup(serial->port[i]); -} -EXPORT_SYMBOL_GPL(usb_serial_generic_disconnect); - -void usb_serial_generic_release(struct usb_serial *serial) -{ -} diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index cf0b0a2f7b5..1477e859347 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -111,7 +111,6 @@ struct edgeport_port { wait_queue_head_t wait_open; /* for handling sleeping while waiting for open to finish */ wait_queue_head_t wait_command; /* for handling sleeping while waiting for command to finish */ - struct async_icount icount; struct usb_serial_port *port; /* loop back to the owner of this object */ }; @@ -215,8 +214,6 @@ static void edge_break(struct tty_struct *tty, int break_state); static int edge_tiocmget(struct tty_struct *tty); static int edge_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); -static int edge_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount); static int edge_startup(struct usb_serial *serial); static void edge_disconnect(struct usb_serial *serial); static void edge_release(struct usb_serial *serial); @@ -867,9 +864,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) init_waitqueue_head(&edge_port->wait_chase); init_waitqueue_head(&edge_port->wait_command); - /* initialize our icount structure */ - memset(&(edge_port->icount), 0x00, sizeof(edge_port->icount)); - /* initialize our port settings */ edge_port->txCredits = 0; /* Can't send any data yet */ /* Must always set this bit to enable ints! */ @@ -1296,7 +1290,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, /* decrement the number of credits we have by the number we just sent */ edge_port->txCredits -= count; - edge_port->icount.tx += count; + edge_port->port->icount.tx += count; status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { @@ -1308,7 +1302,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, /* revert the credits as something bad happened. */ edge_port->txCredits += count; - edge_port->icount.tx -= count; + edge_port->port->icount.tx -= count; } dev_dbg(dev, "%s wrote %d byte(s) TxCredit %d, Fifo %d\n", __func__, count, edge_port->txCredits, fifo->count); @@ -1570,31 +1564,6 @@ static int edge_tiocmget(struct tty_struct *tty) return result; } -static int edge_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct usb_serial_port *port = tty->driver_data; - struct edgeport_port *edge_port = usb_get_serial_port_data(port); - struct async_icount cnow; - cnow = edge_port->icount; - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - - dev_dbg(&port->dev, "%s (%d) TIOCGICOUNT RX=%d, TX=%d\n", __func__, - port->number, icount->rx, icount->tx); - return 0; -} - static int get_serial_info(struct edgeport_port *edge_port, struct serial_struct __user *retinfo) { @@ -1631,8 +1600,6 @@ static int edge_ioctl(struct tty_struct *tty, struct usb_serial_port *port = tty->driver_data; DEFINE_WAIT(wait); struct edgeport_port *edge_port = usb_get_serial_port_data(port); - struct async_icount cnow; - struct async_icount cprev; dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd); @@ -1644,37 +1611,6 @@ static int edge_ioctl(struct tty_struct *tty, case TIOCGSERIAL: dev_dbg(&port->dev, "%s (%d) TIOCGSERIAL\n", __func__, port->number); return get_serial_info(edge_port, (struct serial_struct __user *) arg); - - case TIOCMIWAIT: - dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__, port->number); - cprev = edge_port->icount; - while (1) { - prepare_to_wait(&port->delta_msr_wait, - &wait, TASK_INTERRUPTIBLE); - schedule(); - finish_wait(&port->delta_msr_wait, &wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - - if (port->serial->disconnected) - return -EIO; - - cnow = edge_port->icount; - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { - return 0; - } - cprev = cnow; - } - /* NOTREACHED */ - break; - } return -ENOIOCTLCMD; } @@ -1848,7 +1784,7 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial, edge_serial->rxPort); edge_tty_recv(edge_port->port, buffer, rxLen); - edge_port->icount.rx += rxLen; + edge_port->port->icount.rx += rxLen; } buffer += rxLen; } @@ -2024,7 +1960,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr) if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { - icount = &edge_port->icount; + icount = &edge_port->port->icount; /* update input line counters */ if (newMsr & EDGEPORT_MSR_DELTA_CTS) @@ -2035,7 +1971,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr) icount->dcd++; if (newMsr & EDGEPORT_MSR_DELTA_RI) icount->rng++; - wake_up_interruptible(&edge_port->port->delta_msr_wait); + wake_up_interruptible(&edge_port->port->port.delta_msr_wait); } /* Save the new modem status */ @@ -2070,7 +2006,7 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, edge_tty_recv(edge_port->port, &data, 1); /* update input line counters */ - icount = &edge_port->icount; + icount = &edge_port->port->icount; if (newLsr & LSR_BREAK) icount->brk++; if (newLsr & LSR_OVER_ERR) diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index 1511dd0ad32..ae5fac5656c 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -116,7 +116,8 @@ static struct usb_serial_driver edgeport_2port_device = { .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, .tiocmset = edge_tiocmset, - .get_icount = edge_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .write = edge_write, .write_room = edge_write_room, .chars_in_buffer = edge_chars_in_buffer, @@ -147,7 +148,8 @@ static struct usb_serial_driver edgeport_4port_device = { .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, .tiocmset = edge_tiocmset, - .get_icount = edge_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .write = edge_write, .write_room = edge_write_room, .chars_in_buffer = edge_chars_in_buffer, @@ -178,7 +180,8 @@ static struct usb_serial_driver edgeport_8port_device = { .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, .tiocmset = edge_tiocmset, - .get_icount = edge_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .write = edge_write, .write_room = edge_write_room, .chars_in_buffer = edge_chars_in_buffer, @@ -209,7 +212,8 @@ static struct usb_serial_driver epic_device = { .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, .tiocmset = edge_tiocmset, - .get_icount = edge_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .write = edge_write, .write_room = edge_write_room, .chars_in_buffer = edge_chars_in_buffer, diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 7777172206d..158bf4bc29c 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -86,7 +86,7 @@ struct edgeport_port { int baud_rate; int close_pending; int lsr_event; - struct async_icount icount; + struct edgeport_serial *edge_serial; struct usb_serial_port *port; __u8 bUartMode; /* Port type, 0: RS232, etc. */ @@ -206,7 +206,7 @@ static int restart_read(struct edgeport_port *edge_port); static void edge_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios); -static void edge_send(struct tty_struct *tty); +static void edge_send(struct usb_serial_port *port, struct tty_struct *tty); /* sysfs attributes */ static int edge_create_sysfs_attrs(struct usb_serial_port *port); @@ -1445,7 +1445,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr) if (msr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { - icount = &edge_port->icount; + icount = &edge_port->port->icount; /* update input line counters */ if (msr & EDGEPORT_MSR_DELTA_CTS) @@ -1456,7 +1456,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr) icount->dcd++; if (msr & EDGEPORT_MSR_DELTA_RI) icount->rng++; - wake_up_interruptible(&edge_port->port->delta_msr_wait); + wake_up_interruptible(&edge_port->port->port.delta_msr_wait); } /* Save the new modem status */ @@ -1498,7 +1498,7 @@ static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data, edge_tty_recv(edge_port->port, &data, 1); /* update input line counters */ - icount = &edge_port->icount; + icount = &edge_port->port->icount; if (new_lsr & LSR_BREAK) icount->brk++; if (new_lsr & LSR_OVER_ERR) @@ -1657,7 +1657,7 @@ static void edge_bulk_in_callback(struct urb *urb) else edge_tty_recv(edge_port->port, data, urb->actual_length); - edge_port->icount.rx += urb->actual_length; + edge_port->port->icount.rx += urb->actual_length; } exit: @@ -1712,7 +1712,7 @@ static void edge_bulk_out_callback(struct urb *urb) /* send any buffered data */ tty = tty_port_tty_get(&port->port); - edge_send(tty); + edge_send(port, tty); tty_kref_put(tty); } @@ -1750,8 +1750,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) dev = port->serial->dev; - memset(&(edge_port->icount), 0x00, sizeof(edge_port->icount)); - /* turn off loopback */ status = ti_do_config(edge_port, UMPC_SET_CLR_LOOPBACK, 0); if (status) { @@ -1909,21 +1907,10 @@ static void edge_close(struct usb_serial_port *port) kfifo_reset_out(&edge_port->write_fifo); spin_unlock_irqrestore(&edge_port->ep_lock, flags); - /* assuming we can still talk to the device, - * send a close port command to it */ dev_dbg(&port->dev, "%s - send umpc_close_port\n", __func__); port_number = port->number - port->serial->minor; - - mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) { - send_cmd(serial->dev, - UMPC_CLOSE_PORT, - (__u8)(UMPM_UART1_PORT + port_number), - 0, - NULL, - 0); - } - mutex_unlock(&serial->disc_mutex); + send_cmd(serial->dev, UMPC_CLOSE_PORT, + (__u8)(UMPM_UART1_PORT + port_number), 0, NULL, 0); mutex_lock(&edge_serial->es_lock); --edge_port->edge_serial->num_ports_open; @@ -1953,14 +1940,13 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, count = kfifo_in_locked(&edge_port->write_fifo, data, count, &edge_port->ep_lock); - edge_send(tty); + edge_send(port, tty); return count; } -static void edge_send(struct tty_struct *tty) +static void edge_send(struct usb_serial_port *port, struct tty_struct *tty) { - struct usb_serial_port *port = tty->driver_data; int count, result; struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned long flags; @@ -1999,7 +1985,7 @@ static void edge_send(struct tty_struct *tty) edge_port->ep_write_urb_in_use = 0; /* TODO: reschedule edge_send */ } else - edge_port->icount.tx += count; + edge_port->port->icount.tx += count; /* wakeup any process waiting for writes to complete */ /* there is now more room in the buffer for new writes */ @@ -2360,27 +2346,6 @@ static int edge_tiocmget(struct tty_struct *tty) return result; } -static int edge_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct usb_serial_port *port = tty->driver_data; - struct edgeport_port *edge_port = usb_get_serial_port_data(port); - struct async_icount *ic = &edge_port->icount; - - icount->cts = ic->cts; - icount->dsr = ic->dsr; - icount->rng = ic->rng; - icount->dcd = ic->dcd; - icount->tx = ic->tx; - icount->rx = ic->rx; - icount->frame = ic->frame; - icount->parity = ic->parity; - icount->overrun = ic->overrun; - icount->brk = ic->brk; - icount->buf_overrun = ic->buf_overrun; - return 0; -} - static int get_serial_info(struct edgeport_port *edge_port, struct serial_struct __user *retinfo) { @@ -2392,7 +2357,7 @@ static int get_serial_info(struct edgeport_port *edge_port, cwait = edge_port->port->port.closing_wait; if (cwait != ASYNC_CLOSING_WAIT_NONE) - cwait = jiffies_to_msecs(closing_wait) / 10; + cwait = jiffies_to_msecs(cwait) / 10; memset(&tmp, 0, sizeof(tmp)); @@ -2416,8 +2381,6 @@ static int edge_ioctl(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); - struct async_icount cnow; - struct async_icount cprev; dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd); @@ -2426,32 +2389,6 @@ static int edge_ioctl(struct tty_struct *tty, dev_dbg(&port->dev, "%s - TIOCGSERIAL\n", __func__); return get_serial_info(edge_port, (struct serial_struct __user *) arg); - case TIOCMIWAIT: - dev_dbg(&port->dev, "%s - TIOCMIWAIT\n", __func__); - cprev = edge_port->icount; - while (1) { - interruptible_sleep_on(&port->delta_msr_wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - - if (port->serial->disconnected) - return -EIO; - - cnow = edge_port->icount; - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { - return 0; - } - cprev = cnow; - } - /* not reached */ - break; } return -ENOIOCTLCMD; } @@ -2463,8 +2400,6 @@ static void edge_break(struct tty_struct *tty, int break_state) int status; int bv = 0; /* Off */ - tty_wait_until_sent(tty, 0); - if (break_state == -1) bv = 1; /* On */ status = ti_do_config(edge_port, UMPC_SET_CLR_BREAK, bv); @@ -2546,7 +2481,6 @@ static int edge_port_remove(struct usb_serial_port *port) struct edgeport_port *edge_port; edge_port = usb_get_serial_port_data(port); - edge_remove_sysfs_attrs(port); kfifo_free(&edge_port->write_fifo); kfree(edge_port); @@ -2618,7 +2552,8 @@ static struct usb_serial_driver edgeport_1port_device = { .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, .tiocmset = edge_tiocmset, - .get_icount = edge_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .write = edge_write, .write_room = edge_write_room, .chars_in_buffer = edge_chars_in_buffer, @@ -2649,7 +2584,8 @@ static struct usb_serial_driver edgeport_2port_device = { .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, .tiocmset = edge_tiocmset, - .get_icount = edge_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .write = edge_write, .write_room = edge_write_room, .chars_in_buffer = edge_chars_in_buffer, diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index ff77027160a..9d74c278b7b 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -55,7 +55,6 @@ static void read_rxcmd_callback(struct urb *urb); struct iuu_private { spinlock_t lock; /* store irq state */ - wait_queue_head_t delta_msr_wait; u8 line_status; int tiostatus; /* store IUART SIGNAL for tiocmget call */ u8 reset; /* if 1 reset is needed */ @@ -94,7 +93,6 @@ static int iuu_port_probe(struct usb_serial_port *port) priv->vcc = vcc_default; spin_lock_init(&priv->lock); - init_waitqueue_head(&priv->delta_msr_wait); usb_set_serial_port_data(port, priv); @@ -944,22 +942,13 @@ static void iuu_set_termios(struct tty_struct *tty, static void iuu_close(struct usb_serial_port *port) { /* iuu_led (port,255,0,0,0); */ - struct usb_serial *serial; - - serial = port->serial; - if (!serial) - return; iuu_uart_off(port); - if (serial->dev) { - /* free writebuf */ - /* shutdown our urbs */ - dev_dbg(&port->dev, "%s - shutting down urbs\n", __func__); - usb_kill_urb(port->write_urb); - usb_kill_urb(port->read_urb); - usb_kill_urb(port->interrupt_in_urb); - iuu_led(port, 0, 0, 0xF000, 0xFF); - } + + usb_kill_urb(port->write_urb); + usb_kill_urb(port->read_urb); + + iuu_led(port, 0, 0, 0xF000, 0xFF); } static void iuu_init_termios(struct tty_struct *tty) diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index b011478d2e5..eb30d7b01f3 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -712,45 +712,45 @@ static void usa49wg_indat_callback(struct urb *urb) i = 0; len = 0; - if (urb->actual_length) { - while (i < urb->actual_length) { + while (i < urb->actual_length) { - /* Check port number from message*/ - if (data[i] >= serial->num_ports) { - dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", - __func__, data[i]); - return; - } - port = serial->port[data[i++]]; - len = data[i++]; + /* Check port number from message */ + if (data[i] >= serial->num_ports) { + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", + __func__, data[i]); + return; + } + port = serial->port[data[i++]]; + len = data[i++]; - /* 0x80 bit is error flag */ - if ((data[i] & 0x80) == 0) { - /* no error on any byte */ - i++; - for (x = 1; x < len ; ++x) - tty_insert_flip_char(&port->port, - data[i++], 0); - } else { - /* - * some bytes had errors, every byte has status - */ - for (x = 0; x + 1 < len; x += 2) { - int stat = data[i], flag = 0; - if (stat & RXERROR_OVERRUN) - flag |= TTY_OVERRUN; - if (stat & RXERROR_FRAMING) - flag |= TTY_FRAME; - if (stat & RXERROR_PARITY) - flag |= TTY_PARITY; - /* XXX should handle break (0x10) */ - tty_insert_flip_char(&port->port, - data[i+1], flag); - i += 2; - } + /* 0x80 bit is error flag */ + if ((data[i] & 0x80) == 0) { + /* no error on any byte */ + i++; + for (x = 1; x < len && i < urb->actual_length; ++x) + tty_insert_flip_char(&port->port, + data[i++], 0); + } else { + /* + * some bytes had errors, every byte has status + */ + for (x = 0; x + 1 < len && + i + 1 < urb->actual_length; x += 2) { + int stat = data[i], flag = 0; + + if (stat & RXERROR_OVERRUN) + flag |= TTY_OVERRUN; + if (stat & RXERROR_FRAMING) + flag |= TTY_FRAME; + if (stat & RXERROR_PARITY) + flag |= TTY_PARITY; + /* XXX should handle break (0x10) */ + tty_insert_flip_char(&port->port, data[i+1], + flag); + i += 2; } - tty_flip_buffer_push(&port->port); } + tty_flip_buffer_push(&port->port); } /* Resubmit urb so we continue receiving */ @@ -1092,7 +1092,6 @@ static void keyspan_dtr_rts(struct usb_serial_port *port, int on) static void keyspan_close(struct usb_serial_port *port) { int i; - struct usb_serial *serial = port->serial; struct keyspan_port_private *p_priv; p_priv = usb_get_serial_port_data(port); @@ -1100,28 +1099,17 @@ static void keyspan_close(struct usb_serial_port *port) p_priv->rts_state = 0; p_priv->dtr_state = 0; - if (serial->dev) { - keyspan_send_setup(port, 2); - /* pilot-xfer seems to work best with this delay */ - mdelay(100); - /* keyspan_set_termios(port, NULL); */ - } - - /*while (p_priv->outcont_urb->status == -EINPROGRESS) { - dev_dbg(&port->dev, "%s - urb in progress\n", __func__); - }*/ + keyspan_send_setup(port, 2); + /* pilot-xfer seems to work best with this delay */ + mdelay(100); p_priv->out_flip = 0; p_priv->in_flip = 0; - if (serial->dev) { - /* Stop reading/writing urbs */ - stop_urb(p_priv->inack_urb); - /* stop_urb(p_priv->outcont_urb); */ - for (i = 0; i < 2; i++) { - stop_urb(p_priv->in_urbs[i]); - stop_urb(p_priv->out_urbs[i]); - } + stop_urb(p_priv->inack_urb); + for (i = 0; i < 2; i++) { + stop_urb(p_priv->in_urbs[i]); + stop_urb(p_priv->out_urbs[i]); } } diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 2230223978c..5f1d382e55c 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -593,12 +593,10 @@ static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on) { struct usb_serial *serial = port->serial; - if (serial->dev) { - if (on) - keyspan_pda_set_modem_info(serial, (1<<7) | (1<< 2)); - else - keyspan_pda_set_modem_info(serial, 0); - } + if (on) + keyspan_pda_set_modem_info(serial, (1 << 7) | (1 << 2)); + else + keyspan_pda_set_modem_info(serial, 0); } @@ -649,13 +647,8 @@ error: } static void keyspan_pda_close(struct usb_serial_port *port) { - struct usb_serial *serial = port->serial; - - if (serial->dev) { - /* shutdown our bulk reads and writes */ - usb_kill_urb(port->write_urb); - usb_kill_urb(port->interrupt_in_urb); - } + usb_kill_urb(port->write_urb); + usb_kill_urb(port->interrupt_in_urb); } diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 769d910ae0a..1b4054fe52a 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -341,28 +341,20 @@ static void klsi_105_close(struct usb_serial_port *port) { int rc; - mutex_lock(&port->serial->disc_mutex); - if (!port->serial->disconnected) { - /* send READ_OFF */ - rc = usb_control_msg(port->serial->dev, - usb_sndctrlpipe(port->serial->dev, 0), - KL5KUSB105A_SIO_CONFIGURE, - USB_TYPE_VENDOR | USB_DIR_OUT, - KL5KUSB105A_SIO_CONFIGURE_READ_OFF, - 0, /* index */ - NULL, 0, - KLSI_TIMEOUT); - if (rc < 0) - dev_err(&port->dev, - "Disabling read failed (error = %d)\n", rc); - } - mutex_unlock(&port->serial->disc_mutex); + /* send READ_OFF */ + rc = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + KL5KUSB105A_SIO_CONFIGURE, + USB_TYPE_VENDOR | USB_DIR_OUT, + KL5KUSB105A_SIO_CONFIGURE_READ_OFF, + 0, /* index */ + NULL, 0, + KLSI_TIMEOUT); + if (rc < 0) + dev_err(&port->dev, "failed to disable read: %d\n", rc); /* shutdown our bulk reads and writes */ usb_serial_generic_close(port); - - /* wgg - do I need this? I think so. */ - usb_kill_urb(port->interrupt_in_urb); } /* We need to write a complete 64-byte data block and encode the diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 903d938e174..78b48c31abf 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -65,7 +65,7 @@ static int kobil_tiocmget(struct tty_struct *tty); static int kobil_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static void kobil_read_int_callback(struct urb *urb); -static void kobil_write_callback(struct urb *purb); +static void kobil_write_int_callback(struct urb *urb); static void kobil_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); static void kobil_init_termios(struct tty_struct *tty); @@ -99,6 +99,7 @@ static struct usb_serial_driver kobil_device = { .write = kobil_write, .write_room = kobil_write_room, .read_int_callback = kobil_read_int_callback, + .write_int_callback = kobil_write_int_callback, }; static struct usb_serial_driver * const serial_drivers[] = { @@ -106,8 +107,6 @@ static struct usb_serial_driver * const serial_drivers[] = { }; struct kobil_private { - int write_int_endpoint_address; - int read_int_endpoint_address; unsigned char buf[KOBIL_BUF_LENGTH]; /* buffer for the APDU to send */ int filled; /* index of the last char in buf */ int cur_pos; /* index of the next char to send in buf */ @@ -117,14 +116,8 @@ struct kobil_private { static int kobil_port_probe(struct usb_serial_port *port) { - int i; struct usb_serial *serial = port->serial; struct kobil_private *priv; - struct usb_device *pdev; - struct usb_host_config *actconfig; - struct usb_interface *interface; - struct usb_host_interface *altsetting; - struct usb_host_endpoint *endpoint; priv = kmalloc(sizeof(struct kobil_private), GFP_KERNEL); if (!priv) @@ -150,30 +143,6 @@ static int kobil_port_probe(struct usb_serial_port *port) } usb_set_serial_port_data(port, priv); - /* search for the necessary endpoints */ - pdev = serial->dev; - actconfig = pdev->actconfig; - interface = actconfig->interface[0]; - altsetting = interface->cur_altsetting; - endpoint = altsetting->endpoint; - - for (i = 0; i < altsetting->desc.bNumEndpoints; i++) { - endpoint = &altsetting->endpoint[i]; - if (usb_endpoint_is_int_out(&endpoint->desc)) { - dev_dbg(&serial->dev->dev, - "%s Found interrupt out endpoint. Address: %d\n", - __func__, endpoint->desc.bEndpointAddress); - priv->write_int_endpoint_address = - endpoint->desc.bEndpointAddress; - } - if (usb_endpoint_is_int_in(&endpoint->desc)) { - dev_dbg(&serial->dev->dev, - "%s Found interrupt in endpoint. Address: %d\n", - __func__, endpoint->desc.bEndpointAddress); - priv->read_int_endpoint_address = - endpoint->desc.bEndpointAddress; - } - } return 0; } @@ -205,7 +174,6 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) struct kobil_private *priv; unsigned char *transfer_buffer; int transfer_buffer_length = 8; - int write_urb_transfer_buffer_length = 8; priv = usb_get_serial_port_data(port); @@ -214,27 +182,6 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) if (!transfer_buffer) return -ENOMEM; - /* allocate write_urb */ - if (!port->write_urb) { - dev_dbg(dev, "%s - Allocating port->write_urb\n", __func__); - port->write_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!port->write_urb) { - dev_dbg(dev, "%s - usb_alloc_urb failed\n", __func__); - kfree(transfer_buffer); - return -ENOMEM; - } - } - - /* allocate memory for write_urb transfer buffer */ - port->write_urb->transfer_buffer = - kmalloc(write_urb_transfer_buffer_length, GFP_KERNEL); - if (!port->write_urb->transfer_buffer) { - kfree(transfer_buffer); - usb_free_urb(port->write_urb); - port->write_urb = NULL; - return -ENOMEM; - } - /* get hardware version */ result = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), @@ -310,12 +257,7 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) static void kobil_close(struct usb_serial_port *port) { /* FIXME: Add rts/dtr methods */ - if (port->write_urb) { - usb_poison_urb(port->write_urb); - kfree(port->write_urb->transfer_buffer); - usb_free_urb(port->write_urb); - port->write_urb = NULL; - } + usb_kill_urb(port->interrupt_out_urb); usb_kill_urb(port->interrupt_in_urb); } @@ -333,24 +275,8 @@ static void kobil_read_int_callback(struct urb *urb) } if (urb->actual_length) { - - /* BEGIN DEBUG */ - /* - char *dbg_data; - - dbg_data = kzalloc((3 * purb->actual_length + 10) - * sizeof(char), GFP_KERNEL); - if (! dbg_data) { - return; - } - for (i = 0; i < purb->actual_length; i++) { - sprintf(dbg_data +3*i, "%02X ", data[i]); - } - dev_dbg(&port->dev, " <-- %s\n", dbg_data); - kfree(dbg_data); - */ - /* END DEBUG */ - + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, + data); tty_insert_flip_string(&port->port, data, urb->actual_length); tty_flip_buffer_push(&port->port); } @@ -360,7 +286,7 @@ static void kobil_read_int_callback(struct urb *urb) } -static void kobil_write_callback(struct urb *purb) +static void kobil_write_int_callback(struct urb *urb) { } @@ -403,23 +329,14 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, while (todo > 0) { /* max 8 byte in one urb (endpoint size) */ - length = (todo < 8) ? todo : 8; + length = min(todo, port->interrupt_out_size); /* copy data to transfer buffer */ - memcpy(port->write_urb->transfer_buffer, + memcpy(port->interrupt_out_buffer, priv->buf + priv->cur_pos, length); - usb_fill_int_urb(port->write_urb, - port->serial->dev, - usb_sndintpipe(port->serial->dev, - priv->write_int_endpoint_address), - port->write_urb->transfer_buffer, - length, - kobil_write_callback, - port, - 8 - ); + port->interrupt_out_urb->transfer_buffer_length = length; priv->cur_pos = priv->cur_pos + length; - result = usb_submit_urb(port->write_urb, GFP_NOIO); + result = usb_submit_urb(port->interrupt_out_urb, GFP_NOIO); dev_dbg(&port->dev, "%s - Send write URB returns: %i\n", __func__, result); todo = priv->filled - priv->cur_pos; diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 06d5a60be2c..6a15adf5336 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -35,7 +35,6 @@ #include <linux/usb.h> #include <linux/usb/serial.h> #include <linux/serial.h> -#include <linux/ioctl.h> #include "mct_u232.h" #define DRIVER_AUTHOR "Wolfgang Grandegger <wolfgang@ces.ch>" @@ -44,7 +43,6 @@ /* * Function prototypes */ -static int mct_u232_startup(struct usb_serial *serial); static int mct_u232_port_probe(struct usb_serial_port *port); static int mct_u232_port_remove(struct usb_serial_port *remove); static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port); @@ -57,10 +55,6 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state); static int mct_u232_tiocmget(struct tty_struct *tty); static int mct_u232_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); -static int mct_u232_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg); -static int mct_u232_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount); static void mct_u232_throttle(struct tty_struct *tty); static void mct_u232_unthrottle(struct tty_struct *tty); @@ -95,11 +89,10 @@ static struct usb_serial_driver mct_u232_device = { .break_ctl = mct_u232_break_ctl, .tiocmget = mct_u232_tiocmget, .tiocmset = mct_u232_tiocmset, - .attach = mct_u232_startup, + .tiocmiwait = usb_serial_generic_tiocmiwait, .port_probe = mct_u232_port_probe, .port_remove = mct_u232_port_remove, - .ioctl = mct_u232_ioctl, - .get_icount = mct_u232_get_icount, + .get_icount = usb_serial_generic_get_icount, }; static struct usb_serial_driver * const serial_drivers[] = { @@ -107,13 +100,13 @@ static struct usb_serial_driver * const serial_drivers[] = { }; struct mct_u232_private { + struct urb *read_urb; spinlock_t lock; unsigned int control_state; /* Modem Line Setting (TIOCM) */ unsigned char last_lcr; /* Line Control Register */ unsigned char last_lsr; /* Line Status Register */ unsigned char last_msr; /* Modem Status Register */ unsigned int rx_flags; /* Throttling flags */ - struct async_icount icount; }; #define THROTTLED 0x01 @@ -382,22 +375,6 @@ static void mct_u232_msr_to_state(struct usb_serial_port *port, * Driver's tty interface functions */ -static int mct_u232_startup(struct usb_serial *serial) -{ - struct usb_serial_port *port, *rport; - - /* Puh, that's dirty */ - port = serial->port[0]; - rport = serial->port[1]; - /* No unlinking, it wasn't submitted yet. */ - usb_free_urb(port->read_urb); - port->read_urb = rport->interrupt_in_urb; - rport->interrupt_in_urb = NULL; - port->read_urb->context = port; - - return 0; -} /* mct_u232_startup */ - static int mct_u232_port_probe(struct usb_serial_port *port) { struct mct_u232_private *priv; @@ -406,6 +383,10 @@ static int mct_u232_port_probe(struct usb_serial_port *port) if (!priv) return -ENOMEM; + /* Use second interrupt-in endpoint for reading. */ + priv->read_urb = port->serial->port[1]->interrupt_in_urb; + priv->read_urb->context = port; + spin_lock_init(&priv->lock); usb_set_serial_port_data(port, priv); @@ -469,17 +450,17 @@ static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port) mct_u232_msr_to_state(port, &priv->control_state, priv->last_msr); spin_unlock_irqrestore(&priv->lock, flags); - retval = usb_submit_urb(port->read_urb, GFP_KERNEL); + retval = usb_submit_urb(priv->read_urb, GFP_KERNEL); if (retval) { dev_err(&port->dev, - "usb_submit_urb(read bulk) failed pipe 0x%x err %d\n", + "usb_submit_urb(read) failed pipe 0x%x err %d\n", port->read_urb->pipe, retval); goto error; } retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (retval) { - usb_kill_urb(port->read_urb); + usb_kill_urb(priv->read_urb); dev_err(&port->dev, "usb_submit_urb(read int) failed pipe 0x%x err %d", port->interrupt_in_urb->pipe, retval); @@ -509,11 +490,9 @@ static void mct_u232_dtr_rts(struct usb_serial_port *port, int on) static void mct_u232_close(struct usb_serial_port *port) { - /* - * Must kill the read urb as it is actually an interrupt urb, which - * generic close thus fails to kill. - */ - usb_kill_urb(port->read_urb); + struct mct_u232_private *priv = usb_get_serial_port_data(port); + + usb_kill_urb(priv->read_urb); usb_kill_urb(port->interrupt_in_urb); usb_serial_generic_close(port); @@ -570,7 +549,7 @@ static void mct_u232_read_int_callback(struct urb *urb) /* Record Control Line states */ mct_u232_msr_to_state(port, &priv->control_state, priv->last_msr); - mct_u232_msr_to_icount(&priv->icount, priv->last_msr); + mct_u232_msr_to_icount(&port->icount, priv->last_msr); #if 0 /* Not yet handled. See belkin_sa.c for further information */ @@ -598,7 +577,7 @@ static void mct_u232_read_int_callback(struct urb *urb) tty_kref_put(tty); } #endif - wake_up_interruptible(&port->delta_msr_wait); + wake_up_interruptible(&port->port.delta_msr_wait); spin_unlock_irqrestore(&priv->lock, flags); exit: retval = usb_submit_urb(urb, GFP_ATOMIC); @@ -786,86 +765,6 @@ static void mct_u232_unthrottle(struct tty_struct *tty) } } -static int mct_u232_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - DEFINE_WAIT(wait); - struct usb_serial_port *port = tty->driver_data; - struct mct_u232_private *mct_u232_port = usb_get_serial_port_data(port); - struct async_icount cnow, cprev; - unsigned long flags; - - dev_dbg(&port->dev, "%s - cmd = 0x%x\n", __func__, cmd); - - switch (cmd) { - - case TIOCMIWAIT: - - dev_dbg(&port->dev, "%s TIOCMIWAIT", __func__); - - spin_lock_irqsave(&mct_u232_port->lock, flags); - cprev = mct_u232_port->icount; - spin_unlock_irqrestore(&mct_u232_port->lock, flags); - for ( ; ; ) { - prepare_to_wait(&port->delta_msr_wait, - &wait, TASK_INTERRUPTIBLE); - schedule(); - finish_wait(&port->delta_msr_wait, &wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - - if (port->serial->disconnected) - return -EIO; - - spin_lock_irqsave(&mct_u232_port->lock, flags); - cnow = mct_u232_port->icount; - spin_unlock_irqrestore(&mct_u232_port->lock, flags); - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { - return 0; - } - cprev = cnow; - } - - } - return -ENOIOCTLCMD; -} - -static int mct_u232_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct usb_serial_port *port = tty->driver_data; - struct mct_u232_private *mct_u232_port = usb_get_serial_port_data(port); - struct async_icount *ic = &mct_u232_port->icount; - unsigned long flags; - - spin_lock_irqsave(&mct_u232_port->lock, flags); - - icount->cts = ic->cts; - icount->dsr = ic->dsr; - icount->rng = ic->rng; - icount->dcd = ic->dcd; - icount->rx = ic->rx; - icount->tx = ic->tx; - icount->frame = ic->frame; - icount->overrun = ic->overrun; - icount->parity = ic->parity; - icount->brk = ic->brk; - icount->buf_overrun = ic->buf_overrun; - - spin_unlock_irqrestore(&mct_u232_port->lock, flags); - - dev_dbg(&port->dev, "%s TIOCGICOUNT RX=%d, TX=%d\n", - __func__, icount->rx, icount->tx); - return 0; -} - module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index bf3c7a23553..47e247759eb 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -177,10 +177,7 @@ static void metrousb_cleanup(struct usb_serial_port *port) usb_unlink_urb(port->interrupt_in_urb); usb_kill_urb(port->interrupt_in_urb); - mutex_lock(&port->serial->disc_mutex); - if (!port->serial->disconnected) - metrousb_send_unidirectional_cmd(UNI_CMD_CLOSE, port); - mutex_unlock(&port->serial->disc_mutex); + metrousb_send_unidirectional_cmd(UNI_CMD_CLOSE, port); } static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port) diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index e956eae198f..cc0e54345df 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -62,7 +62,6 @@ struct moschip_port { __u8 shadowMCR; /* last MCR value received */ __u8 shadowMSR; /* last MSR value received */ char open; - struct async_icount icount; struct usb_serial_port *port; /* loop back to the owner */ struct urb *write_urb_pool[NUM_URBS]; }; @@ -1071,9 +1070,6 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port) dev_err(&port->dev, "%s - Error %d submitting read urb\n", __func__, response); - /* initialize our icount structure */ - memset(&(mos7720_port->icount), 0x00, sizeof(mos7720_port->icount)); - /* initialize our port settings */ mos7720_port->shadowMCR = UART_MCR_OUT2; /* Must set to enable ints! */ @@ -1140,16 +1136,9 @@ static void mos7720_close(struct usb_serial_port *port) usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); - mutex_lock(&serial->disc_mutex); - /* these commands must not be issued if the device has - * been disconnected */ - if (!serial->disconnected) { - write_mos_reg(serial, port->number - port->serial->minor, - MCR, 0x00); - write_mos_reg(serial, port->number - port->serial->minor, - IER, 0x00); - } - mutex_unlock(&serial->disc_mutex); + write_mos_reg(serial, port->number - port->serial->minor, MCR, 0x00); + write_mos_reg(serial, port->number - port->serial->minor, IER, 0x00); + mos7720_port->open = 0; } @@ -1799,33 +1788,6 @@ static int mos7720_tiocmset(struct tty_struct *tty, return 0; } -static int mos7720_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct usb_serial_port *port = tty->driver_data; - struct moschip_port *mos7720_port; - struct async_icount cnow; - - mos7720_port = usb_get_serial_port_data(port); - cnow = mos7720_port->icount; - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - - dev_dbg(&port->dev, "%s TIOCGICOUNT RX=%d, TX=%d\n", __func__, - icount->rx, icount->tx); - return 0; -} - static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd, unsigned int __user *value) { @@ -1901,8 +1863,6 @@ static int mos7720_ioctl(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port; - struct async_icount cnow; - struct async_icount cprev; mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) @@ -1927,27 +1887,6 @@ static int mos7720_ioctl(struct tty_struct *tty, dev_dbg(&port->dev, "%s TIOCGSERIAL\n", __func__); return get_serial_info(mos7720_port, (struct serial_struct __user *)arg); - - case TIOCMIWAIT: - dev_dbg(&port->dev, "%s TIOCMIWAIT\n", __func__); - cprev = mos7720_port->icount; - while (1) { - if (signal_pending(current)) - return -ERESTARTSYS; - cnow = mos7720_port->icount; - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { - return 0; - } - cprev = cnow; - } - /* NOTREACHED */ - break; } return -ENOIOCTLCMD; @@ -2103,7 +2042,6 @@ static struct usb_serial_driver moschip7720_2port_driver = { .ioctl = mos7720_ioctl, .tiocmget = mos7720_tiocmget, .tiocmset = mos7720_tiocmset, - .get_icount = mos7720_get_icount, .set_termios = mos7720_set_termios, .write = mos7720_write, .write_room = mos7720_write_room, diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 2be376a2e0e..a0d5ea54598 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -219,8 +219,6 @@ struct moschip_port { char open; char open_ports; wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */ - int delta_msr_cond; - struct async_icount icount; struct usb_serial_port *port; /* loop back to the owner of this object */ /* Offsets */ @@ -399,32 +397,22 @@ static void mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr) struct moschip_port *mos7840_port; struct async_icount *icount; mos7840_port = port; - icount = &mos7840_port->icount; if (new_msr & (MOS_MSR_DELTA_CTS | MOS_MSR_DELTA_DSR | MOS_MSR_DELTA_RI | MOS_MSR_DELTA_CD)) { - icount = &mos7840_port->icount; + icount = &mos7840_port->port->icount; /* update input line counters */ - if (new_msr & MOS_MSR_DELTA_CTS) { + if (new_msr & MOS_MSR_DELTA_CTS) icount->cts++; - smp_wmb(); - } - if (new_msr & MOS_MSR_DELTA_DSR) { + if (new_msr & MOS_MSR_DELTA_DSR) icount->dsr++; - smp_wmb(); - } - if (new_msr & MOS_MSR_DELTA_CD) { + if (new_msr & MOS_MSR_DELTA_CD) icount->dcd++; - smp_wmb(); - } - if (new_msr & MOS_MSR_DELTA_RI) { + if (new_msr & MOS_MSR_DELTA_RI) icount->rng++; - smp_wmb(); - } - mos7840_port->delta_msr_cond = 1; - wake_up_interruptible(&port->port->delta_msr_wait); + wake_up_interruptible(&port->port->port.delta_msr_wait); } } @@ -442,23 +430,15 @@ static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr) } /* update input line counters */ - icount = &port->icount; - if (new_lsr & SERIAL_LSR_BI) { + icount = &port->port->icount; + if (new_lsr & SERIAL_LSR_BI) icount->brk++; - smp_wmb(); - } - if (new_lsr & SERIAL_LSR_OE) { + if (new_lsr & SERIAL_LSR_OE) icount->overrun++; - smp_wmb(); - } - if (new_lsr & SERIAL_LSR_PE) { + if (new_lsr & SERIAL_LSR_PE) icount->parity++; - smp_wmb(); - } - if (new_lsr & SERIAL_LSR_FE) { + if (new_lsr & SERIAL_LSR_FE) icount->frame++; - smp_wmb(); - } } /************************************************************************/ @@ -777,9 +757,8 @@ static void mos7840_bulk_in_callback(struct urb *urb) struct tty_port *tport = &mos7840_port->port->port; tty_insert_flip_string(tport, data, urb->actual_length); tty_flip_buffer_push(tport); - mos7840_port->icount.rx += urb->actual_length; - smp_wmb(); - dev_dbg(&port->dev, "mos7840_port->icount.rx is %d:\n", mos7840_port->icount.rx); + port->icount.rx += urb->actual_length; + dev_dbg(&port->dev, "icount.rx is %d:\n", port->icount.rx); } if (!mos7840_port->read_urb) { @@ -1127,17 +1106,12 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) /* initialize our wait queues */ init_waitqueue_head(&mos7840_port->wait_chase); - /* initialize our icount structure */ - memset(&(mos7840_port->icount), 0x00, sizeof(mos7840_port->icount)); - /* initialize our port settings */ /* Must set to enable ints! */ mos7840_port->shadowMCR = MCR_MASTER_IE; /* send a open port command */ mos7840_port->open = 1; /* mos7840_change_port_settings(mos7840_port,old_termios); */ - mos7840_port->icount.tx = 0; - mos7840_port->icount.rx = 0; return 0; } @@ -1220,25 +1194,10 @@ static void mos7840_close(struct usb_serial_port *port) } } - /* While closing port, shutdown all bulk read, write * - * and interrupt read if they exists */ - if (serial->dev) { - if (mos7840_port->write_urb) { - dev_dbg(&port->dev, "%s", "Shutdown bulk write\n"); - usb_kill_urb(mos7840_port->write_urb); - } - if (mos7840_port->read_urb) { - dev_dbg(&port->dev, "%s", "Shutdown bulk read\n"); - usb_kill_urb(mos7840_port->read_urb); - mos7840_port->read_urb_busy = false; - } - if ((&mos7840_port->control_urb)) { - dev_dbg(&port->dev, "%s", "Shutdown control read\n"); - /*/ usb_kill_urb (mos7840_port->control_urb); */ - } - } -/* if(mos7840_port->ctrl_buf != NULL) */ -/* kfree(mos7840_port->ctrl_buf); */ + usb_kill_urb(mos7840_port->write_urb); + usb_kill_urb(mos7840_port->read_urb); + mos7840_port->read_urb_busy = false; + port0->open_ports--; dev_dbg(&port->dev, "%s in close%d:in port%d\n", __func__, port0->open_ports, port->number); if (port0->open_ports == 0) { @@ -1250,8 +1209,7 @@ static void mos7840_close(struct usb_serial_port *port) if (mos7840_port->write_urb) { /* if this urb had a transfer buffer already (old tx) free it */ - if (mos7840_port->write_urb->transfer_buffer != NULL) - kfree(mos7840_port->write_urb->transfer_buffer); + kfree(mos7840_port->write_urb->transfer_buffer); usb_free_urb(mos7840_port->write_urb); } @@ -1328,9 +1286,8 @@ static void mos7840_break(struct tty_struct *tty, int break_state) if (mos7840_port == NULL) return; - if (serial->dev) - /* flush and block until tx is empty */ - mos7840_block_until_chase_response(tty, mos7840_port); + /* flush and block until tx is empty */ + mos7840_block_until_chase_response(tty, mos7840_port); if (break_state == -1) data = mos7840_port->shadowLCR | LCR_SET_BREAK; @@ -1520,9 +1477,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, goto exit; } bytes_sent = transfer_size; - mos7840_port->icount.tx += transfer_size; - smp_wmb(); - dev_dbg(&port->dev, "mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx); + port->icount.tx += transfer_size; + dev_dbg(&port->dev, "icount.tx is %d:\n", port->icount.tx); exit: return bytes_sent; @@ -2141,34 +2097,6 @@ static int mos7840_get_serial_info(struct moschip_port *mos7840_port, return 0; } -static int mos7840_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct usb_serial_port *port = tty->driver_data; - struct moschip_port *mos7840_port; - struct async_icount cnow; - - mos7840_port = mos7840_get_port_private(port); - cnow = mos7840_port->icount; - - smp_rmb(); - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - - dev_dbg(&port->dev, "%s TIOCGICOUNT RX=%d, TX=%d\n", __func__, - icount->rx, icount->tx); - return 0; -} - /***************************************************************************** * SerialIoctl * this function handles any ioctl calls to the driver @@ -2181,9 +2109,6 @@ static int mos7840_ioctl(struct tty_struct *tty, void __user *argp = (void __user *)arg; struct moschip_port *mos7840_port; - struct async_icount cnow; - struct async_icount cprev; - if (mos7840_port_paranoia_check(port, __func__)) return -1; @@ -2208,41 +2133,6 @@ static int mos7840_ioctl(struct tty_struct *tty, case TIOCSSERIAL: dev_dbg(&port->dev, "%s TIOCSSERIAL\n", __func__); break; - - case TIOCMIWAIT: - dev_dbg(&port->dev, "%s TIOCMIWAIT\n", __func__); - cprev = mos7840_port->icount; - while (1) { - /* interruptible_sleep_on(&mos7840_port->delta_msr_wait); */ - mos7840_port->delta_msr_cond = 0; - wait_event_interruptible(port->delta_msr_wait, - (port->serial->disconnected || - mos7840_port-> - delta_msr_cond == 1)); - - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - - if (port->serial->disconnected) - return -EIO; - - cnow = mos7840_port->icount; - smp_rmb(); - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { - return 0; - } - cprev = cnow; - } - /* NOTREACHED */ - break; - default: break; } @@ -2589,7 +2479,8 @@ static struct usb_serial_driver moschip7840_4port_device = { .break_ctl = mos7840_break, .tiocmget = mos7840_tiocmget, .tiocmset = mos7840_tiocmset, - .get_icount = mos7840_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .port_probe = mos7840_port_probe, .port_remove = mos7840_port_remove, .read_bulk_callback = mos7840_bulk_in_callback, diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 1e1cafe287e..5739bf6f720 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -33,8 +33,7 @@ /* function prototypes */ static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port); -static void omninet_close(struct usb_serial_port *port); -static void omninet_read_bulk_callback(struct urb *urb); +static void omninet_process_read_urb(struct urb *urb); static void omninet_write_bulk_callback(struct urb *urb); static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); @@ -61,11 +60,10 @@ static struct usb_serial_driver zyxel_omninet_device = { .port_probe = omninet_port_probe, .port_remove = omninet_port_remove, .open = omninet_open, - .close = omninet_close, .write = omninet_write, .write_room = omninet_write_room, - .read_bulk_callback = omninet_read_bulk_callback, .write_bulk_callback = omninet_write_bulk_callback, + .process_read_urb = omninet_process_read_urb, .disconnect = omninet_disconnect, }; @@ -74,29 +72,28 @@ static struct usb_serial_driver * const serial_drivers[] = { }; -/* The protocol. +/* + * The protocol. * * The omni.net always exchange 64 bytes of data with the host. The first - * four bytes are the control header, you can see it in the above structure. + * four bytes are the control header. * * oh_seq is a sequence number. Don't know if/how it's used. * oh_len is the length of the data bytes in the packet. * oh_xxx Bit-mapped, related to handshaking and status info. - * I normally set it to 0x03 in trasmitted frames. + * I normally set it to 0x03 in transmitted frames. * 7: Active when the TA is in a CONNECTed state. * 6: unknown * 5: handshaking, unknown * 4: handshaking, unknown * 3: unknown, usually 0 * 2: unknown, usually 0 - * 1: handshaking, unknown, usually set to 1 in trasmitted frames - * 0: handshaking, unknown, usually set to 1 in trasmitted frames + * 1: handshaking, unknown, usually set to 1 in transmitted frames + * 0: handshaking, unknown, usually set to 1 in transmitted frames * oh_pad Probably a pad byte. * * After the header you will find data bytes if oh_len was greater than zero. - * */ - struct omninet_header { __u8 oh_seq; __u8 oh_len; @@ -112,7 +109,7 @@ static int omninet_port_probe(struct usb_serial_port *port) { struct omninet_data *od; - od = kmalloc(sizeof(struct omninet_data), GFP_KERNEL); + od = kzalloc(sizeof(*od), GFP_KERNEL); if (!od) return -ENOMEM; @@ -135,56 +132,32 @@ static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct usb_serial_port *wport; - int result = 0; wport = serial->port[1]; tty_port_tty_set(&wport->port, tty); - /* Start reading from the device */ - result = usb_submit_urb(port->read_urb, GFP_KERNEL); - if (result) - dev_err(&port->dev, - "%s - failed submitting read urb, error %d\n", - __func__, result); - return result; -} - -static void omninet_close(struct usb_serial_port *port) -{ - usb_kill_urb(port->read_urb); + return usb_serial_generic_open(tty, port); } +#define OMNINET_HEADERLEN 4 +#define OMNINET_BULKOUTSIZE 64 +#define OMNINET_PAYLOADSIZE (OMNINET_BULKOUTSIZE - OMNINET_HEADERLEN) -#define OMNINET_DATAOFFSET 0x04 -#define OMNINET_HEADERLEN sizeof(struct omninet_header) -#define OMNINET_BULKOUTSIZE (64 - OMNINET_HEADERLEN) - -static void omninet_read_bulk_callback(struct urb *urb) +static void omninet_process_read_urb(struct urb *urb) { - struct usb_serial_port *port = urb->context; - unsigned char *data = urb->transfer_buffer; - struct omninet_header *header = (struct omninet_header *) &data[0]; - int status = urb->status; - int result; + struct usb_serial_port *port = urb->context; + const struct omninet_header *hdr = urb->transfer_buffer; + const unsigned char *data; + size_t data_len; - if (status) { - dev_dbg(&port->dev, "%s - nonzero read bulk status received: %d\n", - __func__, status); + if (urb->actual_length <= OMNINET_HEADERLEN || !hdr->oh_len) return; - } - - if (urb->actual_length && header->oh_len) { - tty_insert_flip_string(&port->port, data + OMNINET_DATAOFFSET, - header->oh_len); - tty_flip_buffer_push(&port->port); - } - /* Continue trying to always read */ - result = usb_submit_urb(urb, GFP_ATOMIC); - if (result) - dev_err(&port->dev, - "%s - failed resubmitting read urb, error %d\n", - __func__, result); + data = (char *)urb->transfer_buffer + OMNINET_HEADERLEN; + data_len = min_t(size_t, urb->actual_length - OMNINET_HEADERLEN, + hdr->oh_len); + tty_insert_flip_string(&port->port, data, data_len); + tty_flip_buffer_push(&port->port); } static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, @@ -209,9 +182,9 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, return 0; } - count = (count > OMNINET_BULKOUTSIZE) ? OMNINET_BULKOUTSIZE : count; + count = (count > OMNINET_PAYLOADSIZE) ? OMNINET_PAYLOADSIZE : count; - memcpy(wport->write_urb->transfer_buffer + OMNINET_DATAOFFSET, + memcpy(wport->write_urb->transfer_buffer + OMNINET_HEADERLEN, buf, count); usb_serial_debug_data(&port->dev, __func__, count, @@ -223,7 +196,7 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, header->oh_pad = 0x00; /* send the data out the bulk port, always 64 bytes */ - wport->write_urb->transfer_buffer_length = 64; + wport->write_urb->transfer_buffer_length = OMNINET_BULKOUTSIZE; result = usb_submit_urb(wport->write_urb, GFP_ATOMIC); if (result) { diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index e13e1a4d3e1..5f4b0cd0f6e 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -120,7 +120,10 @@ static int send_control_msg(struct usb_serial_port *port, u8 requesttype, 0, 0, buffer, 1, 0); kfree(buffer); - return retval; + if (retval < 0) + return retval; + + return 0; } static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port) @@ -306,7 +309,6 @@ static int opticon_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; - struct usb_serial *serial = port->serial; struct opticon_private *priv = usb_get_serial_port_data(port); unsigned long flags; bool rts; @@ -327,15 +329,11 @@ static int opticon_tiocmset(struct tty_struct *tty, if (!changed) return 0; - /* Send the new RTS state to the connected device */ - mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) - ret = send_control_msg(port, CONTROL_RTS, !rts); - else - ret = -ENODEV; - mutex_unlock(&serial->disc_mutex); + ret = send_control_msg(port, CONTROL_RTS, !rts); + if (ret) + return usb_translate_errors(ret); - return ret; + return 0; } static int get_serial_info(struct usb_serial_port *port, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 09cd3967b8d..734372846ab 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -347,6 +347,7 @@ static void option_instat_callback(struct urb *urb); /* Olivetti products */ #define OLIVETTI_VENDOR_ID 0x0b3c #define OLIVETTI_PRODUCT_OLICARD100 0xc000 +#define OLIVETTI_PRODUCT_OLICARD145 0xc003 /* Celot products */ #define CELOT_VENDOR_ID 0x211f @@ -1273,6 +1274,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) }, + { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) }, { USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */ { USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */ { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/ @@ -1350,6 +1352,12 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE(CHANGHONG_VENDOR_ID, CHANGHONG_PRODUCT_CH690) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x02, 0x01) }, /* D-Link DWM-156 (variant) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x00, 0x00) }, /* D-Link DWM-156 (variant) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x02, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x02, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 87c71ccfee8..7e3e0782e51 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -124,8 +124,6 @@ static void oti6858_close(struct usb_serial_port *port); static void oti6858_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); static void oti6858_init_termios(struct tty_struct *tty); -static int oti6858_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg); static void oti6858_read_int_callback(struct urb *urb); static void oti6858_read_bulk_callback(struct urb *urb); static void oti6858_write_bulk_callback(struct urb *urb); @@ -136,6 +134,7 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty); static int oti6858_tiocmget(struct tty_struct *tty); static int oti6858_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); +static int oti6858_tiocmiwait(struct tty_struct *tty, unsigned long arg); static int oti6858_port_probe(struct usb_serial_port *port); static int oti6858_port_remove(struct usb_serial_port *port); @@ -150,11 +149,11 @@ static struct usb_serial_driver oti6858_device = { .open = oti6858_open, .close = oti6858_close, .write = oti6858_write, - .ioctl = oti6858_ioctl, .set_termios = oti6858_set_termios, .init_termios = oti6858_init_termios, .tiocmget = oti6858_tiocmget, .tiocmset = oti6858_tiocmset, + .tiocmiwait = oti6858_tiocmiwait, .read_bulk_callback = oti6858_read_bulk_callback, .read_int_callback = oti6858_read_int_callback, .write_bulk_callback = oti6858_write_bulk_callback, @@ -650,8 +649,9 @@ static int oti6858_tiocmget(struct tty_struct *tty) return result; } -static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) +static int oti6858_tiocmiwait(struct tty_struct *tty, unsigned long arg) { + struct usb_serial_port *port = tty->driver_data; struct oti6858_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int prev, status; @@ -662,7 +662,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) spin_unlock_irqrestore(&priv->lock, flags); while (1) { - wait_event_interruptible(port->delta_msr_wait, + wait_event_interruptible(port->port.delta_msr_wait, port->serial->disconnected || priv->status.pin_state != prev); if (signal_pending(current)) @@ -689,24 +689,6 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) return 0; } -static int oti6858_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct usb_serial_port *port = tty->driver_data; - - dev_dbg(&port->dev, "%s(cmd = 0x%04x, arg = 0x%08lx)\n", __func__, cmd, arg); - - switch (cmd) { - case TIOCMIWAIT: - dev_dbg(&port->dev, "%s(): TIOCMIWAIT\n", __func__); - return wait_modem_info(port, arg); - default: - dev_dbg(&port->dev, "%s(): 0x%04x not supported\n", __func__, cmd); - break; - } - return -ENOIOCTLCMD; -} - static void oti6858_read_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; @@ -765,7 +747,7 @@ static void oti6858_read_int_callback(struct urb *urb) if (!priv->transient) { if (xs->pin_state != priv->status.pin_state) - wake_up_interruptible(&port->delta_msr_wait); + wake_up_interruptible(&port->port.delta_msr_wait); memcpy(&priv->status, xs, OTI6858_CTRL_PKT_SIZE); } diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 3b10018d89a..7151659367a 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -149,7 +149,7 @@ static int pl2303_vendor_read(__u16 value, __u16 index, int res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), VENDOR_READ_REQUEST, VENDOR_READ_REQUEST_TYPE, value, index, buf, 1, 100); - dev_dbg(&serial->dev->dev, "0x%x:0x%x:0x%x:0x%x %d - %x\n", + dev_dbg(&serial->interface->dev, "0x%x:0x%x:0x%x:0x%x %d - %x\n", VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, value, index, res, buf[0]); return res; @@ -161,7 +161,7 @@ static int pl2303_vendor_write(__u16 value, __u16 index, int res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE, value, index, NULL, 0, 100); - dev_dbg(&serial->dev->dev, "0x%x:0x%x:0x%x:0x%x %d\n", + dev_dbg(&serial->interface->dev, "0x%x:0x%x:0x%x:0x%x %d\n", VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, value, index, res); return res; @@ -248,14 +248,15 @@ static int pl2303_port_remove(struct usb_serial_port *port) return 0; } -static int set_control_lines(struct usb_device *dev, u8 value) +static int pl2303_set_control_lines(struct usb_serial_port *port, u8 value) { + struct usb_device *dev = port->serial->dev; int retval; retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE, value, 0, NULL, 0, 100); - dev_dbg(&dev->dev, "%s - value = %d, retval = %d\n", __func__, + dev_dbg(&port->dev, "%s - value = %d, retval = %d\n", __func__, value, retval); return retval; } @@ -437,7 +438,7 @@ static void pl2303_set_termios(struct tty_struct *tty, if (control != priv->line_control) { control = priv->line_control; spin_unlock_irqrestore(&priv->lock, flags); - set_control_lines(serial->dev, control); + pl2303_set_control_lines(port, control); } else { spin_unlock_irqrestore(&priv->lock, flags); } @@ -480,7 +481,7 @@ static void pl2303_dtr_rts(struct usb_serial_port *port, int on) priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); control = priv->line_control; spin_unlock_irqrestore(&priv->lock, flags); - set_control_lines(port->serial->dev, control); + pl2303_set_control_lines(port, control); } static void pl2303_close(struct usb_serial_port *port) @@ -530,7 +531,6 @@ static int pl2303_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; - struct usb_serial *serial = port->serial; struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; u8 control; @@ -548,14 +548,11 @@ static int pl2303_tiocmset(struct tty_struct *tty, control = priv->line_control; spin_unlock_irqrestore(&priv->lock, flags); - mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) - ret = set_control_lines(serial->dev, control); - else - ret = -ENODEV; - mutex_unlock(&serial->disc_mutex); + ret = pl2303_set_control_lines(port, control); + if (ret) + return usb_translate_errors(ret); - return ret; + return 0; } static int pl2303_tiocmget(struct tty_struct *tty) @@ -592,8 +589,9 @@ static int pl2303_carrier_raised(struct usb_serial_port *port) return 0; } -static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) +static int pl2303_tiocmiwait(struct tty_struct *tty, unsigned long arg) { + struct usb_serial_port *port = tty->driver_data; struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int prevstatus; @@ -605,7 +603,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) spin_unlock_irqrestore(&priv->lock, flags); while (1) { - interruptible_sleep_on(&port->delta_msr_wait); + interruptible_sleep_on(&port->port.delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; @@ -651,10 +649,6 @@ static int pl2303_ioctl(struct tty_struct *tty, return -EFAULT; return 0; - - case TIOCMIWAIT: - dev_dbg(&port->dev, "%s TIOCMIWAIT\n", __func__); - return wait_modem_info(port, arg); default: dev_dbg(&port->dev, "%s not supported = 0x%04x\n", __func__, cmd); break; @@ -720,7 +714,7 @@ static void pl2303_update_line_status(struct usb_serial_port *port, spin_unlock_irqrestore(&priv->lock, flags); if (priv->line_status & UART_BREAK_ERROR) usb_serial_handle_break(port); - wake_up_interruptible(&port->delta_msr_wait); + wake_up_interruptible(&port->port.delta_msr_wait); tty = tty_port_tty_get(&port->port); if (!tty) @@ -784,7 +778,7 @@ static void pl2303_process_read_urb(struct urb *urb) line_status = priv->line_status; priv->line_status &= ~UART_STATE_TRANSIENT_MASK; spin_unlock_irqrestore(&priv->lock, flags); - wake_up_interruptible(&port->delta_msr_wait); + wake_up_interruptible(&port->port.delta_msr_wait); if (!urb->actual_length) return; @@ -835,6 +829,7 @@ static struct usb_serial_driver pl2303_device = { .set_termios = pl2303_set_termios, .tiocmget = pl2303_tiocmget, .tiocmset = pl2303_tiocmset, + .tiocmiwait = pl2303_tiocmiwait, .process_read_urb = pl2303_process_read_urb, .read_int_callback = pl2303_read_int_callback, .attach = pl2303_startup, diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index ef3a7d5eaab..02b0803425c 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -127,8 +127,6 @@ struct qt2_port_private { u8 shadowLSR; u8 shadowMSR; - struct async_icount icount; - struct usb_serial_port *port; }; @@ -420,12 +418,6 @@ static void qt2_close(struct usb_serial_port *port) port_priv->urb_in_use = false; spin_unlock_irqrestore(&port_priv->urb_lock, flags); - mutex_lock(&port->serial->disc_mutex); - if (port->serial->disconnected) { - mutex_unlock(&port->serial->disc_mutex); - return; - } - /* flush the port transmit buffer */ i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), @@ -456,8 +448,6 @@ static void qt2_close(struct usb_serial_port *port) if (i < 0) dev_err(&port->dev, "%s - close port failed %i\n", __func__, i); - - mutex_unlock(&port->serial->disc_mutex); } static void qt2_disconnect(struct usb_serial *serial) @@ -490,71 +480,6 @@ static int get_serial_info(struct usb_serial_port *port, return 0; } -static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) -{ - struct qt2_port_private *priv = usb_get_serial_port_data(port); - struct async_icount prev, cur; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - prev = priv->icount; - spin_unlock_irqrestore(&priv->lock, flags); - - while (1) { - wait_event_interruptible(port->delta_msr_wait, - (port->serial->disconnected || - (priv->icount.rng != prev.rng) || - (priv->icount.dsr != prev.dsr) || - (priv->icount.dcd != prev.dcd) || - (priv->icount.cts != prev.cts))); - - if (signal_pending(current)) - return -ERESTARTSYS; - - if (port->serial->disconnected) - return -EIO; - - spin_lock_irqsave(&priv->lock, flags); - cur = priv->icount; - spin_unlock_irqrestore(&priv->lock, flags); - - if ((prev.rng == cur.rng) && - (prev.dsr == cur.dsr) && - (prev.dcd == cur.dcd) && - (prev.cts == cur.cts)) - return -EIO; - - if ((arg & TIOCM_RNG && (prev.rng != cur.rng)) || - (arg & TIOCM_DSR && (prev.dsr != cur.dsr)) || - (arg & TIOCM_CD && (prev.dcd != cur.dcd)) || - (arg & TIOCM_CTS && (prev.cts != cur.cts))) - return 0; - } - return 0; -} - -static int qt2_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct usb_serial_port *port = tty->driver_data; - struct qt2_port_private *priv = usb_get_serial_port_data(port); - struct async_icount cnow = priv->icount; - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - - return 0; -} - static int qt2_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { @@ -564,10 +489,6 @@ static int qt2_ioctl(struct tty_struct *tty, case TIOCGSERIAL: return get_serial_info(port, (struct serial_struct __user *)arg); - - case TIOCMIWAIT: - return wait_modem_info(port, arg); - default: break; } @@ -948,18 +869,15 @@ static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch) if (newMSR & UART_MSR_ANY_DELTA) { /* update input line counters */ if (newMSR & UART_MSR_DCTS) - port_priv->icount.cts++; - + port->icount.cts++; if (newMSR & UART_MSR_DDSR) - port_priv->icount.dsr++; - + port->icount.dsr++; if (newMSR & UART_MSR_DDCD) - port_priv->icount.dcd++; - + port->icount.dcd++; if (newMSR & UART_MSR_TERI) - port_priv->icount.rng++; + port->icount.rng++; - wake_up_interruptible(&port->delta_msr_wait); + wake_up_interruptible(&port->port.delta_msr_wait); } } @@ -979,7 +897,7 @@ static void qt2_update_lsr(struct usb_serial_port *port, unsigned char *ch) port_priv->shadowLSR = newLSR; spin_unlock_irqrestore(&port_priv->lock, flags); - icount = &port_priv->icount; + icount = &port->icount; if (newLSR & UART_LSR_BRK_ERROR_BITS) { @@ -1089,7 +1007,8 @@ static struct usb_serial_driver qt2_device = { .break_ctl = qt2_break_ctl, .tiocmget = qt2_tiocmget, .tiocmset = qt2_tiocmset, - .get_icount = qt2_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .ioctl = qt2_ioctl, .set_termios = qt2_set_termios, }; diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index d66148a17fe..8894665cd61 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -774,30 +774,25 @@ static void sierra_close(struct usb_serial_port *port) portdata->rts_state = 0; portdata->dtr_state = 0; - if (serial->dev) { - mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) { - serial->interface->needs_remote_wakeup = 0; - /* odd error handling due to pm counters */ - if (!usb_autopm_get_interface(serial->interface)) - sierra_send_setup(port); - else - usb_autopm_get_interface_no_resume(serial->interface); - - } - mutex_unlock(&serial->disc_mutex); - spin_lock_irq(&intfdata->susp_lock); - portdata->opened = 0; - spin_unlock_irq(&intfdata->susp_lock); + mutex_lock(&serial->disc_mutex); + if (!serial->disconnected) { + serial->interface->needs_remote_wakeup = 0; + /* odd error handling due to pm counters */ + if (!usb_autopm_get_interface(serial->interface)) + sierra_send_setup(port); + else + usb_autopm_get_interface_no_resume(serial->interface); + } + mutex_unlock(&serial->disc_mutex); + spin_lock_irq(&intfdata->susp_lock); + portdata->opened = 0; + spin_unlock_irq(&intfdata->susp_lock); - /* Stop reading urbs */ - sierra_stop_rx_urbs(port); - /* .. and release them */ - for (i = 0; i < portdata->num_in_urbs; i++) { - sierra_release_urb(portdata->in_urbs[i]); - portdata->in_urbs[i] = NULL; - } + sierra_stop_rx_urbs(port); + for (i = 0; i < portdata->num_in_urbs; i++) { + sierra_release_urb(portdata->in_urbs[i]); + portdata->in_urbs[i] = NULL; } } diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 549ef68ff5f..cf3df793c2b 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -1,7 +1,7 @@ /* * spcp8x5 USB to serial adaptor driver * - * Copyright (C) 2010 Johan Hovold (jhovold@gmail.com) + * Copyright (C) 2010-2013 Johan Hovold (jhovold@gmail.com) * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn) * Copyright (C) 2006 S1 Corp. * @@ -13,8 +13,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * */ #include <linux/kernel.h> #include <linux/errno.h> @@ -28,7 +26,10 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -#define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver" +#define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver" + +#define SPCP825_QUIRK_NO_UART_STATUS 0x01 +#define SPCP825_QUIRK_NO_WORK_MODE 0x02 #define SPCP8x5_007_VID 0x04FC #define SPCP8x5_007_PID 0x0201 @@ -46,13 +47,15 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)}, { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)}, { USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)}, - { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID)}, + { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID), + .driver_info = SPCP825_QUIRK_NO_UART_STATUS | + SPCP825_QUIRK_NO_WORK_MODE }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, id_table); struct spcp8x5_usb_ctrl_arg { - u8 type; + u8 type; u8 cmd; u8 cmd_type; u16 value; @@ -138,49 +141,33 @@ struct spcp8x5_usb_ctrl_arg { #define UART_OVERRUN_ERROR 0x40 #define UART_CTS 0x80 -enum spcp8x5_type { - SPCP825_007_TYPE, - SPCP825_008_TYPE, - SPCP825_PHILIP_TYPE, - SPCP825_INTERMATIC_TYPE, - SPCP835_TYPE, -}; - struct spcp8x5_private { - spinlock_t lock; - enum spcp8x5_type type; - u8 line_control; - u8 line_status; + unsigned quirks; + spinlock_t lock; + u8 line_control; }; +static int spcp8x5_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + usb_set_serial_data(serial, (void *)id); + + return 0; +} + static int spcp8x5_port_probe(struct usb_serial_port *port) { - struct usb_serial *serial = port->serial; + const struct usb_device_id *id = usb_get_serial_data(port->serial); struct spcp8x5_private *priv; - enum spcp8x5_type type = SPCP825_007_TYPE; - u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); - - if (product == 0x0201) - type = SPCP825_007_TYPE; - else if (product == 0x0231) - type = SPCP835_TYPE; - else if (product == 0x0235) - type = SPCP825_008_TYPE; - else if (product == 0x0204) - type = SPCP825_INTERMATIC_TYPE; - else if (product == 0x0471 && - serial->dev->descriptor.idVendor == cpu_to_le16(0x081e)) - type = SPCP825_PHILIP_TYPE; - dev_dbg(&serial->dev->dev, "device type = %d\n", (int)type); priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; spin_lock_init(&priv->lock); - priv->type = type; + priv->quirks = id->driver_info; - usb_set_serial_port_data(port , priv); + usb_set_serial_port_data(port, priv); return 0; } @@ -195,86 +182,79 @@ static int spcp8x5_port_remove(struct usb_serial_port *port) return 0; } -/* set the modem control line of the device. - * NOTE spcp825-007 not supported this */ -static int spcp8x5_set_ctrlLine(struct usb_device *dev, u8 value, - enum spcp8x5_type type) +static int spcp8x5_set_ctrl_line(struct usb_serial_port *port, u8 mcr) { + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + struct usb_device *dev = port->serial->dev; int retval; - u8 mcr = 0 ; - if (type == SPCP825_007_TYPE) + if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS) return -EPERM; - mcr = (unsigned short)value; retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), SET_UART_STATUS_TYPE, SET_UART_STATUS, mcr, 0x04, NULL, 0, 100); - if (retval != 0) - dev_dbg(&dev->dev, "usb_control_msg return %#x\n", retval); + if (retval != 0) { + dev_err(&port->dev, "failed to set control lines: %d\n", + retval); + } return retval; } -/* get the modem status register of the device - * NOTE spcp825-007 not supported this */ -static int spcp8x5_get_msr(struct usb_device *dev, u8 *status, - enum spcp8x5_type type) +static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status) { - u8 *status_buffer; + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + struct usb_device *dev = port->serial->dev; + u8 *buf; int ret; - /* I return Permited not support here but seem inval device - * is more fix */ - if (type == SPCP825_007_TYPE) + if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS) return -EPERM; - if (status == NULL) - return -EINVAL; - status_buffer = kmalloc(1, GFP_KERNEL); - if (!status_buffer) + buf = kzalloc(1, GFP_KERNEL); + if (!buf) return -ENOMEM; - status_buffer[0] = status[0]; ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), GET_UART_STATUS, GET_UART_STATUS_TYPE, - 0, GET_UART_STATUS_MSR, status_buffer, 1, 100); + 0, GET_UART_STATUS_MSR, buf, 1, 100); if (ret < 0) - dev_dbg(&dev->dev, "Get MSR = 0x%p failed (error = %d)", - status_buffer, ret); + dev_err(&port->dev, "failed to get modem status: %d", ret); - dev_dbg(&dev->dev, "0xc0:0x22:0:6 %d - 0x%p ", ret, status_buffer); - status[0] = status_buffer[0]; - kfree(status_buffer); + dev_dbg(&port->dev, "0xc0:0x22:0:6 %d - 0x02%x", ret, *buf); + *status = *buf; + kfree(buf); return ret; } -/* select the work mode. - * NOTE this function not supported by spcp825-007 */ -static void spcp8x5_set_workMode(struct usb_device *dev, u16 value, - u16 index, enum spcp8x5_type type) +static void spcp8x5_set_work_mode(struct usb_serial_port *port, u16 value, + u16 index) { + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + struct usb_device *dev = port->serial->dev; int ret; - /* I return Permited not support here but seem inval device - * is more fix */ - if (type == SPCP825_007_TYPE) + if (priv->quirks & SPCP825_QUIRK_NO_WORK_MODE) return; ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), SET_WORKING_MODE_TYPE, SET_WORKING_MODE, value, index, NULL, 0, 100); - dev_dbg(&dev->dev, "value = %#x , index = %#x\n", value, index); + dev_dbg(&port->dev, "value = %#x , index = %#x\n", value, index); if (ret < 0) - dev_dbg(&dev->dev, - "RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret); + dev_err(&port->dev, "failed to set work mode: %d\n", ret); } static int spcp8x5_carrier_raised(struct usb_serial_port *port) { - struct spcp8x5_private *priv = usb_get_serial_port_data(port); - if (priv->line_status & MSR_STATUS_LINE_DCD) + u8 msr; + int ret; + + ret = spcp8x5_get_msr(port, &msr); + if (ret || msr & MSR_STATUS_LINE_DCD) return 1; + return 0; } @@ -293,20 +273,17 @@ static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on) | MCR_CONTROL_LINE_RTS); control = priv->line_control; spin_unlock_irqrestore(&priv->lock, flags); - spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type); + spcp8x5_set_ctrl_line(port, control); } static void spcp8x5_init_termios(struct tty_struct *tty) { - /* for the 1st time call this function */ tty->termios = tty_std_termios; tty->termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL; tty->termios.c_ispeed = 115200; tty->termios.c_ospeed = 115200; } -/* set the serial param for transfer. we should check if we really need to - * transfer. if we set flow control we should do this too. */ static void spcp8x5_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { @@ -321,7 +298,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty, int i; u8 control; - /* check that they really want us to change something */ if (!tty_termios_hw_change(&tty->termios, old_termios)) return; @@ -337,7 +313,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty, if (control != priv->line_control) { control = priv->line_control; spin_unlock_irqrestore(&priv->lock, flags); - spcp8x5_set_ctrlLine(serial->dev, control , priv->type); + spcp8x5_set_ctrl_line(port, control); } else { spin_unlock_irqrestore(&priv->lock, flags); } @@ -397,9 +373,9 @@ static void spcp8x5_set_termios(struct tty_struct *tty, if (cflag & PARENB) { buf[1] |= (cflag & PARODD) ? SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ; - } else + } else { buf[1] |= SET_UART_FORMAT_PAR_NONE; - + } uartdata = buf[0] | buf[1]<<8; i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), @@ -412,22 +388,16 @@ static void spcp8x5_set_termios(struct tty_struct *tty, if (cflag & CRTSCTS) { /* enable hardware flow control */ - spcp8x5_set_workMode(serial->dev, 0x000a, - SET_WORKING_MODE_U2C, priv->type); + spcp8x5_set_work_mode(port, 0x000a, SET_WORKING_MODE_U2C); } } -/* open the serial port. do some usb system call. set termios and get the line - * status of the device. */ static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port) { struct ktermios tmp_termios; struct usb_serial *serial = port->serial; struct spcp8x5_private *priv = usb_get_serial_port_data(port); int ret; - unsigned long flags; - u8 status = 0x30; - /* status 0x30 means DSR and CTS = 1 other CDC RI and delta = 0 */ usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); @@ -438,142 +408,16 @@ static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port) if (ret) return ret; - spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type); + spcp8x5_set_ctrl_line(port, priv->line_control); - /* Setup termios */ if (tty) spcp8x5_set_termios(tty, port, &tmp_termios); - spcp8x5_get_msr(serial->dev, &status, priv->type); - - /* may be we should update uart status here but now we did not do */ - spin_lock_irqsave(&priv->lock, flags); - priv->line_status = status & 0xf0 ; - spin_unlock_irqrestore(&priv->lock, flags); - port->port.drain_delay = 256; return usb_serial_generic_open(tty, port); } -static void spcp8x5_process_read_urb(struct urb *urb) -{ - struct usb_serial_port *port = urb->context; - struct spcp8x5_private *priv = usb_get_serial_port_data(port); - unsigned char *data = urb->transfer_buffer; - unsigned long flags; - u8 status; - char tty_flag; - - /* get tty_flag from status */ - tty_flag = TTY_NORMAL; - - spin_lock_irqsave(&priv->lock, flags); - status = priv->line_status; - priv->line_status &= ~UART_STATE_TRANSIENT_MASK; - spin_unlock_irqrestore(&priv->lock, flags); - /* wake up the wait for termios */ - wake_up_interruptible(&port->delta_msr_wait); - - if (!urb->actual_length) - return; - - - if (status & UART_STATE_TRANSIENT_MASK) { - /* break takes precedence over parity, which takes precedence - * over framing errors */ - if (status & UART_BREAK_ERROR) - tty_flag = TTY_BREAK; - else if (status & UART_PARITY_ERROR) - tty_flag = TTY_PARITY; - else if (status & UART_FRAME_ERROR) - tty_flag = TTY_FRAME; - dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag); - - /* overrun is special, not associated with a char */ - if (status & UART_OVERRUN_ERROR) - tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); - - if (status & UART_DCD) { - struct tty_struct *tty = tty_port_tty_get(&port->port); - if (tty) { - usb_serial_handle_dcd_change(port, tty, - priv->line_status & MSR_STATUS_LINE_DCD); - tty_kref_put(tty); - } - } - } - - tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag, - urb->actual_length); - tty_flip_buffer_push(&port->port); -} - -static int spcp8x5_wait_modem_info(struct usb_serial_port *port, - unsigned int arg) -{ - struct spcp8x5_private *priv = usb_get_serial_port_data(port); - unsigned long flags; - unsigned int prevstatus; - unsigned int status; - unsigned int changed; - - spin_lock_irqsave(&priv->lock, flags); - prevstatus = priv->line_status; - spin_unlock_irqrestore(&priv->lock, flags); - - while (1) { - /* wake up in bulk read */ - interruptible_sleep_on(&port->delta_msr_wait); - - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - - if (port->serial->disconnected) - return -EIO; - - spin_lock_irqsave(&priv->lock, flags); - status = priv->line_status; - spin_unlock_irqrestore(&priv->lock, flags); - - changed = prevstatus^status; - - if (((arg & TIOCM_RNG) && (changed & MSR_STATUS_LINE_RI)) || - ((arg & TIOCM_DSR) && (changed & MSR_STATUS_LINE_DSR)) || - ((arg & TIOCM_CD) && (changed & MSR_STATUS_LINE_DCD)) || - ((arg & TIOCM_CTS) && (changed & MSR_STATUS_LINE_CTS))) - return 0; - - prevstatus = status; - } - /* NOTREACHED */ - return 0; -} - -static int spcp8x5_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct usb_serial_port *port = tty->driver_data; - - dev_dbg(&port->dev, "%s (%d) cmd = 0x%04x\n", __func__, - port->number, cmd); - - switch (cmd) { - case TIOCMIWAIT: - dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__, - port->number); - return spcp8x5_wait_modem_info(port, arg); - - default: - dev_dbg(&port->dev, "%s not supported = 0x%04x", __func__, - cmd); - break; - } - - return -ENOIOCTLCMD; -} - static int spcp8x5_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { @@ -594,7 +438,7 @@ static int spcp8x5_tiocmset(struct tty_struct *tty, control = priv->line_control; spin_unlock_irqrestore(&priv->lock, flags); - return spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type); + return spcp8x5_set_ctrl_line(port, control); } static int spcp8x5_tiocmget(struct tty_struct *tty) @@ -603,12 +447,15 @@ static int spcp8x5_tiocmget(struct tty_struct *tty) struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int mcr; - unsigned int status; + u8 status; unsigned int result; + result = spcp8x5_get_msr(port, &status); + if (result) + return result; + spin_lock_irqsave(&priv->lock, flags); mcr = priv->line_control; - status = priv->line_status; spin_unlock_irqrestore(&priv->lock, flags); result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) @@ -621,7 +468,6 @@ static int spcp8x5_tiocmget(struct tty_struct *tty) return result; } -/* All of the device info needed for the spcp8x5 SIO serial converter */ static struct usb_serial_driver spcp8x5_device = { .driver = { .owner = THIS_MODULE, @@ -629,17 +475,16 @@ static struct usb_serial_driver spcp8x5_device = { }, .id_table = id_table, .num_ports = 1, - .open = spcp8x5_open, + .open = spcp8x5_open, .dtr_rts = spcp8x5_dtr_rts, .carrier_raised = spcp8x5_carrier_raised, - .set_termios = spcp8x5_set_termios, + .set_termios = spcp8x5_set_termios, .init_termios = spcp8x5_init_termios, - .ioctl = spcp8x5_ioctl, - .tiocmget = spcp8x5_tiocmget, - .tiocmset = spcp8x5_tiocmset, + .tiocmget = spcp8x5_tiocmget, + .tiocmset = spcp8x5_tiocmset, + .probe = spcp8x5_probe, .port_probe = spcp8x5_port_probe, .port_remove = spcp8x5_port_remove, - .process_read_urb = spcp8x5_process_read_urb, }; static struct usb_serial_driver * const serial_drivers[] = { diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index 4b2a19757b4..5b62dbbdf99 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -61,7 +61,6 @@ struct ssu100_port_private { spinlock_t status_lock; u8 shadowLSR; u8 shadowMSR; - struct async_icount icount; }; static inline int ssu100_control_msg(struct usb_device *dev, @@ -315,11 +314,6 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port) return usb_serial_generic_open(tty, port); } -static void ssu100_close(struct usb_serial_port *port) -{ - usb_serial_generic_close(port); -} - static int get_serial_info(struct usb_serial_port *port, struct serial_struct __user *retinfo) { @@ -343,73 +337,6 @@ static int get_serial_info(struct usb_serial_port *port, return 0; } -static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) -{ - struct ssu100_port_private *priv = usb_get_serial_port_data(port); - struct async_icount prev, cur; - unsigned long flags; - - spin_lock_irqsave(&priv->status_lock, flags); - prev = priv->icount; - spin_unlock_irqrestore(&priv->status_lock, flags); - - while (1) { - wait_event_interruptible(port->delta_msr_wait, - (port->serial->disconnected || - (priv->icount.rng != prev.rng) || - (priv->icount.dsr != prev.dsr) || - (priv->icount.dcd != prev.dcd) || - (priv->icount.cts != prev.cts))); - - if (signal_pending(current)) - return -ERESTARTSYS; - - if (port->serial->disconnected) - return -EIO; - - spin_lock_irqsave(&priv->status_lock, flags); - cur = priv->icount; - spin_unlock_irqrestore(&priv->status_lock, flags); - - if ((prev.rng == cur.rng) && - (prev.dsr == cur.dsr) && - (prev.dcd == cur.dcd) && - (prev.cts == cur.cts)) - return -EIO; - - if ((arg & TIOCM_RNG && (prev.rng != cur.rng)) || - (arg & TIOCM_DSR && (prev.dsr != cur.dsr)) || - (arg & TIOCM_CD && (prev.dcd != cur.dcd)) || - (arg & TIOCM_CTS && (prev.cts != cur.cts))) - return 0; - } - return 0; -} - -static int ssu100_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct usb_serial_port *port = tty->driver_data; - struct ssu100_port_private *priv = usb_get_serial_port_data(port); - struct async_icount cnow = priv->icount; - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - - return 0; -} - - - static int ssu100_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { @@ -421,10 +348,6 @@ static int ssu100_ioctl(struct tty_struct *tty, case TIOCGSERIAL: return get_serial_info(port, (struct serial_struct __user *) arg); - - case TIOCMIWAIT: - return wait_modem_info(port, arg); - default: break; } @@ -532,14 +455,14 @@ static void ssu100_update_msr(struct usb_serial_port *port, u8 msr) if (msr & UART_MSR_ANY_DELTA) { /* update input line counters */ if (msr & UART_MSR_DCTS) - priv->icount.cts++; + port->icount.cts++; if (msr & UART_MSR_DDSR) - priv->icount.dsr++; + port->icount.dsr++; if (msr & UART_MSR_DDCD) - priv->icount.dcd++; + port->icount.dcd++; if (msr & UART_MSR_TERI) - priv->icount.rng++; - wake_up_interruptible(&port->delta_msr_wait); + port->icount.rng++; + wake_up_interruptible(&port->port.delta_msr_wait); } } @@ -558,22 +481,22 @@ static void ssu100_update_lsr(struct usb_serial_port *port, u8 lsr, /* we always want to update icount, but we only want to * update tty_flag for one case */ if (lsr & UART_LSR_BI) { - priv->icount.brk++; + port->icount.brk++; *tty_flag = TTY_BREAK; usb_serial_handle_break(port); } if (lsr & UART_LSR_PE) { - priv->icount.parity++; + port->icount.parity++; if (*tty_flag == TTY_NORMAL) *tty_flag = TTY_PARITY; } if (lsr & UART_LSR_FE) { - priv->icount.frame++; + port->icount.frame++; if (*tty_flag == TTY_NORMAL) *tty_flag = TTY_FRAME; } if (lsr & UART_LSR_OE){ - priv->icount.overrun++; + port->icount.overrun++; if (*tty_flag == TTY_NORMAL) *tty_flag = TTY_OVERRUN; } @@ -630,7 +553,6 @@ static struct usb_serial_driver ssu100_device = { .id_table = id_table, .num_ports = 1, .open = ssu100_open, - .close = ssu100_close, .attach = ssu100_attach, .port_probe = ssu100_port_probe, .port_remove = ssu100_port_remove, @@ -638,10 +560,10 @@ static struct usb_serial_driver ssu100_device = { .process_read_urb = ssu100_process_read_urb, .tiocmget = ssu100_tiocmget, .tiocmset = ssu100_tiocmset, - .get_icount = ssu100_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .ioctl = ssu100_ioctl, .set_termios = ssu100_set_termios, - .disconnect = usb_serial_generic_disconnect, }; static struct usb_serial_driver * const serial_drivers[] = { diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index be05e6caf9a..9b1648945e7 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -1,6 +1,7 @@ /* * Symbol USB barcode to serial driver * + * Copyright (C) 2013 Johan Hovold <jhovold@gmail.com> * Copyright (C) 2009 Greg Kroah-Hartman <gregkh@suse.de> * Copyright (C) 2009 Novell Inc. * @@ -26,27 +27,17 @@ static const struct usb_device_id id_table[] = { }; MODULE_DEVICE_TABLE(usb, id_table); -/* This structure holds all of the individual device information */ struct symbol_private { - struct usb_device *udev; - struct usb_serial *serial; - struct usb_serial_port *port; - unsigned char *int_buffer; - struct urb *int_urb; - int buffer_size; - u8 bInterval; - u8 int_address; spinlock_t lock; /* protects the following flags */ bool throttled; bool actually_throttled; - bool rts; }; static void symbol_int_callback(struct urb *urb) { - struct symbol_private *priv = urb->context; + struct usb_serial_port *port = urb->context; + struct symbol_private *priv = usb_get_serial_port_data(port); unsigned char *data = urb->transfer_buffer; - struct usb_serial_port *port = priv->port; int status = urb->status; int result; int data_length; @@ -84,7 +75,7 @@ static void symbol_int_callback(struct urb *urb) tty_insert_flip_string(&port->port, &data[1], data_length); tty_flip_buffer_push(&port->port); } else { - dev_dbg(&priv->udev->dev, + dev_dbg(&port->dev, "Improper amount of data received from the device, " "%d bytes", urb->actual_length); } @@ -94,12 +85,7 @@ exit: /* Continue trying to always read if we should */ if (!priv->throttled) { - usb_fill_int_urb(priv->int_urb, priv->udev, - usb_rcvintpipe(priv->udev, - priv->int_address), - priv->int_buffer, priv->buffer_size, - symbol_int_callback, priv, priv->bInterval); - result = usb_submit_urb(priv->int_urb, GFP_ATOMIC); + result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result) dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", @@ -118,15 +104,10 @@ static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port) spin_lock_irqsave(&priv->lock, flags); priv->throttled = false; priv->actually_throttled = false; - priv->port = port; spin_unlock_irqrestore(&priv->lock, flags); /* Start reading from the device */ - usb_fill_int_urb(priv->int_urb, priv->udev, - usb_rcvintpipe(priv->udev, priv->int_address), - priv->int_buffer, priv->buffer_size, - symbol_int_callback, priv, priv->bInterval); - result = usb_submit_urb(priv->int_urb, GFP_KERNEL); + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", @@ -136,10 +117,7 @@ static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port) static void symbol_close(struct usb_serial_port *port) { - struct symbol_private *priv = usb_get_serial_data(port->serial); - - /* shutdown our urbs */ - usb_kill_urb(priv->int_urb); + usb_kill_urb(port->interrupt_in_urb); } static void symbol_throttle(struct tty_struct *tty) @@ -166,7 +144,7 @@ static void symbol_unthrottle(struct tty_struct *tty) spin_unlock_irq(&priv->lock); if (was_throttled) { - result = usb_submit_urb(priv->int_urb, GFP_KERNEL); + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", @@ -176,89 +154,36 @@ static void symbol_unthrottle(struct tty_struct *tty) static int symbol_startup(struct usb_serial *serial) { + if (!serial->num_interrupt_in) { + dev_err(&serial->dev->dev, "no interrupt-in endpoint\n"); + return -ENODEV; + } + + return 0; +} + +static int symbol_port_probe(struct usb_serial_port *port) +{ struct symbol_private *priv; - struct usb_host_interface *intf; - int i; - int retval = -ENOMEM; - bool int_in_found = false; - /* create our private serial structure */ priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (priv == NULL) { - dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__); + if (!priv) return -ENOMEM; - } + spin_lock_init(&priv->lock); - priv->serial = serial; - priv->port = serial->port[0]; - priv->udev = serial->dev; - - /* find our interrupt endpoint */ - intf = serial->interface->altsetting; - for (i = 0; i < intf->desc.bNumEndpoints; ++i) { - struct usb_endpoint_descriptor *endpoint; - - endpoint = &intf->endpoint[i].desc; - if (!usb_endpoint_is_int_in(endpoint)) - continue; - - priv->int_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!priv->int_urb) { - dev_err(&priv->udev->dev, "out of memory\n"); - goto error; - } - - priv->buffer_size = usb_endpoint_maxp(endpoint) * 2; - priv->int_buffer = kmalloc(priv->buffer_size, GFP_KERNEL); - if (!priv->int_buffer) { - dev_err(&priv->udev->dev, "out of memory\n"); - goto error; - } - - priv->int_address = endpoint->bEndpointAddress; - priv->bInterval = endpoint->bInterval; - - /* set up our int urb */ - usb_fill_int_urb(priv->int_urb, priv->udev, - usb_rcvintpipe(priv->udev, - endpoint->bEndpointAddress), - priv->int_buffer, priv->buffer_size, - symbol_int_callback, priv, priv->bInterval); - - int_in_found = true; - break; - } - if (!int_in_found) { - dev_err(&priv->udev->dev, - "Error - the proper endpoints were not found!\n"); - goto error; - } + usb_set_serial_port_data(port, priv); - usb_set_serial_data(serial, priv); return 0; - -error: - usb_free_urb(priv->int_urb); - kfree(priv->int_buffer); - kfree(priv); - return retval; -} - -static void symbol_disconnect(struct usb_serial *serial) -{ - struct symbol_private *priv = usb_get_serial_data(serial); - - usb_kill_urb(priv->int_urb); - usb_free_urb(priv->int_urb); } -static void symbol_release(struct usb_serial *serial) +static int symbol_port_remove(struct usb_serial_port *port) { - struct symbol_private *priv = usb_get_serial_data(serial); + struct symbol_private *priv = usb_get_serial_port_data(port); - kfree(priv->int_buffer); kfree(priv); + + return 0; } static struct usb_serial_driver symbol_device = { @@ -269,12 +194,13 @@ static struct usb_serial_driver symbol_device = { .id_table = id_table, .num_ports = 1, .attach = symbol_startup, + .port_probe = symbol_port_probe, + .port_remove = symbol_port_remove, .open = symbol_open, .close = symbol_close, - .disconnect = symbol_disconnect, - .release = symbol_release, .throttle = symbol_throttle, .unthrottle = symbol_unthrottle, + .read_int_callback = symbol_int_callback, }; static struct usb_serial_driver * const serial_drivers[] = { diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 19a71a9eecf..cac47aef291 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -67,13 +67,10 @@ struct ti_port { int tp_is_open; __u8 tp_msr; - __u8 tp_lsr; __u8 tp_shadow_mcr; __u8 tp_uart_mode; /* 232 or 485 modes */ unsigned int tp_uart_base_addr; int tp_flags; - int tp_closing_wait;/* in .01 secs */ - struct async_icount tp_icount; wait_queue_head_t tp_write_wait; struct ti_device *tp_tdev; struct usb_serial_port *tp_port; @@ -108,8 +105,6 @@ static void ti_throttle(struct tty_struct *tty); static void ti_unthrottle(struct tty_struct *tty); static int ti_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); -static int ti_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount); static void ti_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios); static int ti_tiocmget(struct tty_struct *tty); @@ -124,15 +119,13 @@ static void ti_recv(struct usb_serial_port *port, unsigned char *data, int length); static void ti_send(struct ti_port *tport); static int ti_set_mcr(struct ti_port *tport, unsigned int mcr); -static int ti_get_lsr(struct ti_port *tport); +static int ti_get_lsr(struct ti_port *tport, u8 *lsr); static int ti_get_serial_info(struct ti_port *tport, struct serial_struct __user *ret_arg); static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport, struct serial_struct __user *new_arg); static void ti_handle_new_msr(struct ti_port *tport, __u8 msr); -static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush); - static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty); static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty); @@ -235,7 +228,8 @@ static struct usb_serial_driver ti_1port_device = { .set_termios = ti_set_termios, .tiocmget = ti_tiocmget, .tiocmset = ti_tiocmset, - .get_icount = ti_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .break_ctl = ti_break, .read_int_callback = ti_interrupt_callback, .read_bulk_callback = ti_bulk_in_callback, @@ -265,7 +259,8 @@ static struct usb_serial_driver ti_2port_device = { .set_termios = ti_set_termios, .tiocmget = ti_tiocmget, .tiocmset = ti_tiocmset, - .get_icount = ti_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .break_ctl = ti_break, .read_int_callback = ti_interrupt_callback, .read_bulk_callback = ti_bulk_in_callback, @@ -430,7 +425,7 @@ static int ti_port_probe(struct usb_serial_port *port) tport->tp_uart_base_addr = TI_UART1_BASE_ADDR; else tport->tp_uart_base_addr = TI_UART2_BASE_ADDR; - tport->tp_closing_wait = closing_wait; + port->port.closing_wait = msecs_to_jiffies(10 * closing_wait); init_waitqueue_head(&tport->tp_write_wait); if (kfifo_alloc(&tport->write_fifo, TI_WRITE_BUF_SIZE, GFP_KERNEL)) { kfree(tport); @@ -480,8 +475,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) port_number = port->number - port->serial->minor; - memset(&(tport->tp_icount), 0x00, sizeof(tport->tp_icount)); - tport->tp_msr = 0; tport->tp_shadow_mcr |= (TI_MCR_RTS | TI_MCR_DTR); @@ -585,6 +578,8 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) tport->tp_is_open = 1; ++tdev->td_open_port_count; + port->port.drain_delay = 3; + goto release_lock; unlink_int_urb: @@ -604,6 +599,7 @@ static void ti_close(struct usb_serial_port *port) int port_number; int status; int do_unlock; + unsigned long flags; tdev = usb_get_serial_data(port->serial); tport = usb_get_serial_port_data(port); @@ -612,11 +608,12 @@ static void ti_close(struct usb_serial_port *port) tport->tp_is_open = 0; - ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 1); - usb_kill_urb(port->read_urb); usb_kill_urb(port->write_urb); tport->tp_write_urb_in_use = 0; + spin_lock_irqsave(&tport->tp_lock, flags); + kfifo_reset_out(&tport->write_fifo); + spin_unlock_irqrestore(&tport->tp_lock, flags); port_number = port->number - port->serial->minor; @@ -687,6 +684,8 @@ static int ti_chars_in_buffer(struct tty_struct *tty) struct ti_port *tport = usb_get_serial_port_data(port); int chars = 0; unsigned long flags; + int ret; + u8 lsr; if (tport == NULL) return 0; @@ -695,6 +694,12 @@ static int ti_chars_in_buffer(struct tty_struct *tty) chars = kfifo_len(&tport->write_fifo); spin_unlock_irqrestore(&tport->tp_lock, flags); + if (!chars) { + ret = ti_get_lsr(tport, &lsr); + if (!ret && !(lsr & TI_LSR_TX_EMPTY)) + chars = 1; + } + dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } @@ -731,38 +736,11 @@ static void ti_unthrottle(struct tty_struct *tty) } } -static int ti_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct usb_serial_port *port = tty->driver_data; - struct ti_port *tport = usb_get_serial_port_data(port); - struct async_icount cnow = tport->tp_icount; - - dev_dbg(&port->dev, "%s - TIOCGICOUNT RX=%d, TX=%d\n", __func__, - cnow.rx, cnow.tx); - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - - return 0; -} - static int ti_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); - struct async_icount cnow; - struct async_icount cprev; dev_dbg(&port->dev, "%s - cmd = 0x%04X\n", __func__, cmd); @@ -778,29 +756,6 @@ static int ti_ioctl(struct tty_struct *tty, dev_dbg(&port->dev, "%s - TIOCSSERIAL\n", __func__); return ti_set_serial_info(tty, tport, (struct serial_struct __user *)arg); - case TIOCMIWAIT: - dev_dbg(&port->dev, "%s - TIOCMIWAIT\n", __func__); - cprev = tport->tp_icount; - while (1) { - interruptible_sleep_on(&port->delta_msr_wait); - if (signal_pending(current)) - return -ERESTARTSYS; - - if (port->serial->disconnected) - return -EIO; - - cnow = tport->tp_icount; - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) - return 0; - cprev = cnow; - } - break; } return -ENOIOCTLCMD; } @@ -1018,8 +973,6 @@ static void ti_break(struct tty_struct *tty, int break_state) if (tport == NULL) return; - ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 0); - status = ti_write_byte(port, tport->tp_tdev, tport->tp_uart_base_addr + TI_UART_OFFSET_LCR, TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0); @@ -1156,7 +1109,7 @@ static void ti_bulk_in_callback(struct urb *urb) else ti_recv(port, urb->transfer_buffer, urb->actual_length); spin_lock(&tport->tp_lock); - tport->tp_icount.rx += urb->actual_length; + port->icount.rx += urb->actual_length; spin_unlock(&tport->tp_lock); } @@ -1264,7 +1217,7 @@ static void ti_send(struct ti_port *tport) /* TODO: reschedule ti_send */ } else { spin_lock_irqsave(&tport->tp_lock, flags); - tport->tp_icount.tx += count; + port->icount.tx += count; spin_unlock_irqrestore(&tport->tp_lock, flags); } @@ -1297,7 +1250,7 @@ static int ti_set_mcr(struct ti_port *tport, unsigned int mcr) } -static int ti_get_lsr(struct ti_port *tport) +static int ti_get_lsr(struct ti_port *tport, u8 *lsr) { int size, status; struct ti_device *tdev = tport->tp_tdev; @@ -1323,7 +1276,7 @@ static int ti_get_lsr(struct ti_port *tport) dev_dbg(&port->dev, "%s - lsr 0x%02X\n", __func__, data->bLSR); - tport->tp_lsr = data->bLSR; + *lsr = data->bLSR; free_data: kfree(data); @@ -1336,10 +1289,15 @@ static int ti_get_serial_info(struct ti_port *tport, { struct usb_serial_port *port = tport->tp_port; struct serial_struct ret_serial; + unsigned cwait; if (!ret_arg) return -EFAULT; + cwait = port->port.closing_wait; + if (cwait != ASYNC_CLOSING_WAIT_NONE) + cwait = jiffies_to_msecs(cwait) / 10; + memset(&ret_serial, 0, sizeof(ret_serial)); ret_serial.type = PORT_16550A; @@ -1348,7 +1306,7 @@ static int ti_get_serial_info(struct ti_port *tport, ret_serial.flags = tport->tp_flags; ret_serial.xmit_fifo_size = TI_WRITE_BUF_SIZE; ret_serial.baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800; - ret_serial.closing_wait = tport->tp_closing_wait; + ret_serial.closing_wait = cwait; if (copy_to_user(ret_arg, &ret_serial, sizeof(*ret_arg))) return -EFAULT; @@ -1361,12 +1319,17 @@ static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport, struct serial_struct __user *new_arg) { struct serial_struct new_serial; + unsigned cwait; if (copy_from_user(&new_serial, new_arg, sizeof(new_serial))) return -EFAULT; + cwait = new_serial.closing_wait; + if (cwait != ASYNC_CLOSING_WAIT_NONE) + cwait = msecs_to_jiffies(10 * new_serial.closing_wait); + tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS; - tport->tp_closing_wait = new_serial.closing_wait; + tport->tp_port->port.closing_wait = cwait; return 0; } @@ -1382,7 +1345,7 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr) if (msr & TI_MSR_DELTA_MASK) { spin_lock_irqsave(&tport->tp_lock, flags); - icount = &tport->tp_icount; + icount = &tport->tp_port->icount; if (msr & TI_MSR_DELTA_CTS) icount->cts++; if (msr & TI_MSR_DELTA_DSR) @@ -1391,7 +1354,7 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr) icount->dcd++; if (msr & TI_MSR_DELTA_RI) icount->rng++; - wake_up_interruptible(&tport->tp_port->delta_msr_wait); + wake_up_interruptible(&tport->tp_port->port.delta_msr_wait); spin_unlock_irqrestore(&tport->tp_lock, flags); } @@ -1411,56 +1374,6 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr) } -static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush) -{ - struct ti_device *tdev = tport->tp_tdev; - struct usb_serial_port *port = tport->tp_port; - wait_queue_t wait; - - spin_lock_irq(&tport->tp_lock); - - /* wait for data to drain from the buffer */ - tdev->td_urb_error = 0; - init_waitqueue_entry(&wait, current); - add_wait_queue(&tport->tp_write_wait, &wait); - for (;;) { - set_current_state(TASK_INTERRUPTIBLE); - if (kfifo_len(&tport->write_fifo) == 0 - || timeout == 0 || signal_pending(current) - || tdev->td_urb_error - || port->serial->disconnected) /* disconnect */ - break; - spin_unlock_irq(&tport->tp_lock); - timeout = schedule_timeout(timeout); - spin_lock_irq(&tport->tp_lock); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&tport->tp_write_wait, &wait); - - /* flush any remaining data in the buffer */ - if (flush) - kfifo_reset_out(&tport->write_fifo); - - spin_unlock_irq(&tport->tp_lock); - - mutex_lock(&port->serial->disc_mutex); - /* wait for data to drain from the device */ - /* wait for empty tx register, plus 20 ms */ - timeout += jiffies; - tport->tp_lsr &= ~TI_LSR_TX_EMPTY; - while ((long)(jiffies - timeout) < 0 && !signal_pending(current) - && !(tport->tp_lsr&TI_LSR_TX_EMPTY) && !tdev->td_urb_error - && !port->serial->disconnected) { - if (ti_get_lsr(tport)) - break; - mutex_unlock(&port->serial->disc_mutex); - msleep_interruptible(20); - mutex_lock(&port->serial->disc_mutex); - } - mutex_unlock(&port->serial->disc_mutex); -} - - static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty) { unsigned long flags; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 650be17a68f..cf75beb1251 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1,6 +1,7 @@ /* * USB Serial Converter driver * + * Copyright (C) 2009 - 2013 Johan Hovold (jhovold@gmail.com) * Copyright (C) 1999 - 2012 Greg Kroah-Hartman (greg@kroah.com) * Copyright (C) 2000 Peter Berger (pberger@brimson.com) * Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com) @@ -14,7 +15,6 @@ * * See Documentation/usb/usb-serial.txt for more information on using this * driver - * */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -49,7 +49,6 @@ drivers depend on it. */ -/* initially all NULL */ static struct usb_serial *serial_table[SERIAL_TTY_MINORS]; static DEFINE_MUTEX(table_lock); static LIST_HEAD(usb_serial_driver_list); @@ -139,7 +138,7 @@ static void destroy_serial(struct kref *kref) if (serial->minor != SERIAL_TTY_NO_MINOR) return_serial(serial); - if (serial->attached) + if (serial->attached && serial->type->release) serial->type->release(serial); /* Now that nothing is using the ports, they can be freed */ @@ -225,7 +224,7 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty) return retval; } -static int serial_activate(struct tty_port *tport, struct tty_struct *tty) +static int serial_port_activate(struct tty_port *tport, struct tty_struct *tty) { struct usb_serial_port *port = container_of(tport, struct usb_serial_port, port); @@ -249,30 +248,27 @@ static int serial_open(struct tty_struct *tty, struct file *filp) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + dev_dbg(tty->dev, "%s\n", __func__); + return tty_port_open(&port->port, tty, filp); } /** - * serial_down - shut down hardware + * serial_port_shutdown - shut down hardware * @tport: tty port to shut down * - * Shut down a USB serial port unless it is the console. We never - * shut down the console hardware as it will always be in use. Serialized - * against activate by the tport mutex and kept to matching open/close pairs + * Shut down a USB serial port. Serialized against activate by the + * tport mutex and kept to matching open/close pairs * of calls by the ASYNCB_INITIALIZED flag. + * + * Not called if tty is console. */ -static void serial_down(struct tty_port *tport) +static void serial_port_shutdown(struct tty_port *tport) { struct usb_serial_port *port = container_of(tport, struct usb_serial_port, port); struct usb_serial_driver *drv = port->serial->type; - /* - * The console is magical. Do not hang up the console hardware - * or there will be tears. - */ - if (port->port.console) - return; + if (drv->close) drv->close(port); } @@ -281,7 +277,8 @@ static void serial_hangup(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + dev_dbg(tty->dev, "%s\n", __func__); + tty_port_hangup(&port->port); } @@ -289,7 +286,8 @@ static void serial_close(struct tty_struct *tty, struct file *filp) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + dev_dbg(tty->dev, "%s\n", __func__); + tty_port_close(&port->port, tty, filp); } @@ -308,14 +306,14 @@ static void serial_cleanup(struct tty_struct *tty) struct usb_serial *serial; struct module *owner; + dev_dbg(tty->dev, "%s\n", __func__); + /* The console is magical. Do not hang up the console hardware * or there will be tears. */ if (port->port.console) return; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); - tty->driver_data = NULL; serial = port->serial; @@ -339,10 +337,8 @@ static int serial_write(struct tty_struct *tty, const unsigned char *buf, if (port->serial->dev->state == USB_STATE_NOTATTACHED) goto exit; - dev_dbg(tty->dev, "%s - port %d, %d byte(s)\n", __func__, - port->number, count); + dev_dbg(tty->dev, "%s - %d byte(s)\n", __func__, count); - /* pass on to the driver specific version of this function */ retval = port->serial->type->write(tty, port, buf, count); if (retval < 0) retval = usb_translate_errors(retval); @@ -354,8 +350,8 @@ static int serial_write_room(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); - /* pass on to the driver specific version of this function */ + dev_dbg(tty->dev, "%s\n", __func__); + return port->serial->type->write_room(tty); } @@ -365,7 +361,7 @@ static int serial_chars_in_buffer(struct tty_struct *tty) struct usb_serial *serial = port->serial; int count = 0; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + dev_dbg(tty->dev, "%s\n", __func__); mutex_lock(&serial->disc_mutex); /* if the device was unplugged then any remaining characters @@ -383,9 +379,8 @@ static void serial_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + dev_dbg(tty->dev, "%s\n", __func__); - /* pass on to the driver specific version of this function */ if (port->serial->type->throttle) port->serial->type->throttle(tty); } @@ -394,9 +389,8 @@ static void serial_unthrottle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + dev_dbg(tty->dev, "%s\n", __func__); - /* pass on to the driver specific version of this function */ if (port->serial->type->unthrottle) port->serial->type->unthrottle(tty); } @@ -407,15 +401,20 @@ static int serial_ioctl(struct tty_struct *tty, struct usb_serial_port *port = tty->driver_data; int retval = -ENODEV; - dev_dbg(tty->dev, "%s - port %d, cmd 0x%.4x\n", __func__, - port->number, cmd); + dev_dbg(tty->dev, "%s - cmd 0x%.4x\n", __func__, cmd); + + switch (cmd) { + case TIOCMIWAIT: + if (port->serial->type->tiocmiwait) + retval = port->serial->type->tiocmiwait(tty, arg); + break; + default: + if (port->serial->type->ioctl) + retval = port->serial->type->ioctl(tty, cmd, arg); + else + retval = -ENOIOCTLCMD; + } - /* pass on to the driver specific version of this function - if it is available */ - if (port->serial->type->ioctl) { - retval = port->serial->type->ioctl(tty, cmd, arg); - } else - retval = -ENOIOCTLCMD; return retval; } @@ -423,10 +422,8 @@ static void serial_set_termios(struct tty_struct *tty, struct ktermios *old) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + dev_dbg(tty->dev, "%s\n", __func__); - /* pass on to the driver specific version of this function - if it is available */ if (port->serial->type->set_termios) port->serial->type->set_termios(tty, port, old); else @@ -437,12 +434,11 @@ static int serial_break(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + dev_dbg(tty->dev, "%s\n", __func__); - /* pass on to the driver specific version of this function - if it is available */ if (port->serial->type->break_ctl) port->serial->type->break_ctl(tty, break_state); + return 0; } @@ -496,7 +492,7 @@ static int serial_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + dev_dbg(tty->dev, "%s\n", __func__); if (port->serial->type->tiocmget) return port->serial->type->tiocmget(tty); @@ -508,7 +504,7 @@ static int serial_tiocmset(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + dev_dbg(tty->dev, "%s\n", __func__); if (port->serial->type->tiocmset) return port->serial->type->tiocmset(tty, set, clear); @@ -520,7 +516,7 @@ static int serial_get_icount(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + dev_dbg(tty->dev, "%s\n", __func__); if (port->serial->type->get_icount) return port->serial->type->get_icount(tty, icount); @@ -546,43 +542,39 @@ static void usb_serial_port_work(struct work_struct *work) tty_port_tty_wakeup(&port->port); } -static void kill_traffic(struct usb_serial_port *port) +static void usb_serial_port_poison_urbs(struct usb_serial_port *port) { int i; for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) - usb_kill_urb(port->read_urbs[i]); + usb_poison_urb(port->read_urbs[i]); for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) - usb_kill_urb(port->write_urbs[i]); - /* - * This is tricky. - * Some drivers submit the read_urb in the - * handler for the write_urb or vice versa - * this order determines the order in which - * usb_kill_urb() must be used to reliably - * kill the URBs. As it is unknown here, - * both orders must be used in turn. - * The call below is not redundant. - */ - usb_kill_urb(port->read_urb); - usb_kill_urb(port->interrupt_in_urb); - usb_kill_urb(port->interrupt_out_urb); + usb_poison_urb(port->write_urbs[i]); + + usb_poison_urb(port->interrupt_in_urb); + usb_poison_urb(port->interrupt_out_urb); +} + +static void usb_serial_port_unpoison_urbs(struct usb_serial_port *port) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) + usb_unpoison_urb(port->read_urbs[i]); + for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) + usb_unpoison_urb(port->write_urbs[i]); + + usb_unpoison_urb(port->interrupt_in_urb); + usb_unpoison_urb(port->interrupt_out_urb); } -static void port_release(struct device *dev) +static void usb_serial_port_release(struct device *dev) { struct usb_serial_port *port = to_usb_serial_port(dev); int i; dev_dbg(dev, "%s\n", __func__); - /* - * Stop all the traffic before cancelling the work, so that - * nobody will restart it by calling usb_serial_port_softint. - */ - kill_traffic(port); - cancel_work_sync(&port->work); - usb_free_urb(port->interrupt_in_urb); usb_free_urb(port->interrupt_out_urb); for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) { @@ -607,10 +599,8 @@ static struct usb_serial *create_serial(struct usb_device *dev, struct usb_serial *serial; serial = kzalloc(sizeof(*serial), GFP_KERNEL); - if (!serial) { - dev_err(&dev->dev, "%s - out of memory\n", __func__); + if (!serial) return NULL; - } serial->dev = usb_get_dev(dev); serial->type = driver; serial->interface = usb_get_intf(interface); @@ -673,7 +663,7 @@ static struct usb_serial_driver *search_serial_device( return NULL; } -static int serial_carrier_raised(struct tty_port *port) +static int serial_port_carrier_raised(struct tty_port *port) { struct usb_serial_port *p = container_of(port, struct usb_serial_port, port); struct usb_serial_driver *drv = p->serial->type; @@ -684,7 +674,7 @@ static int serial_carrier_raised(struct tty_port *port) return 1; } -static void serial_dtr_rts(struct tty_port *port, int on) +static void serial_port_dtr_rts(struct tty_port *port, int on) { struct usb_serial_port *p = container_of(port, struct usb_serial_port, port); struct usb_serial *serial = p->serial; @@ -704,10 +694,10 @@ static void serial_dtr_rts(struct tty_port *port, int on) } static const struct tty_port_operations serial_port_ops = { - .carrier_raised = serial_carrier_raised, - .dtr_rts = serial_dtr_rts, - .activate = serial_activate, - .shutdown = serial_down, + .carrier_raised = serial_port_carrier_raised, + .dtr_rts = serial_port_dtr_rts, + .activate = serial_port_activate, + .shutdown = serial_port_shutdown, }; static int usb_serial_probe(struct usb_interface *interface, @@ -754,7 +744,6 @@ static int usb_serial_probe(struct usb_interface *interface, serial = create_serial(dev, interface, type); if (!serial) { module_put(type->driver.owner); - dev_err(ddev, "%s - out of memory\n", __func__); return -ENOMEM; } @@ -895,7 +884,6 @@ static int usb_serial_probe(struct usb_interface *interface, port->port.ops = &serial_port_ops; port->serial = serial; spin_lock_init(&port->lock); - init_waitqueue_head(&port->delta_msr_wait); /* Keep this for private driver use for the moment but should probably go away */ INIT_WORK(&port->work, usb_serial_port_work); @@ -903,7 +891,7 @@ static int usb_serial_probe(struct usb_interface *interface, port->dev.parent = &interface->dev; port->dev.driver = NULL; port->dev.bus = &usb_serial_bus_type; - port->dev.release = &port_release; + port->dev.release = &usb_serial_port_release; device_initialize(&port->dev); } @@ -919,16 +907,12 @@ static int usb_serial_probe(struct usb_interface *interface, for (j = 0; j < ARRAY_SIZE(port->read_urbs); ++j) { set_bit(j, &port->read_urbs_free); port->read_urbs[j] = usb_alloc_urb(0, GFP_KERNEL); - if (!port->read_urbs[j]) { - dev_err(ddev, "No free urbs available\n"); + if (!port->read_urbs[j]) goto probe_error; - } port->bulk_in_buffers[j] = kmalloc(buffer_size, GFP_KERNEL); - if (!port->bulk_in_buffers[j]) { - dev_err(ddev, "Couldn't allocate bulk_in_buffer\n"); + if (!port->bulk_in_buffers[j]) goto probe_error; - } usb_fill_bulk_urb(port->read_urbs[j], dev, usb_rcvbulkpipe(dev, endpoint->bEndpointAddress), @@ -955,16 +939,12 @@ static int usb_serial_probe(struct usb_interface *interface, for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) { set_bit(j, &port->write_urbs_free); port->write_urbs[j] = usb_alloc_urb(0, GFP_KERNEL); - if (!port->write_urbs[j]) { - dev_err(ddev, "No free urbs available\n"); + if (!port->write_urbs[j]) goto probe_error; - } port->bulk_out_buffers[j] = kmalloc(buffer_size, GFP_KERNEL); - if (!port->bulk_out_buffers[j]) { - dev_err(ddev, "Couldn't allocate bulk_out_buffer\n"); + if (!port->bulk_out_buffers[j]) goto probe_error; - } usb_fill_bulk_urb(port->write_urbs[j], dev, usb_sndbulkpipe(dev, endpoint->bEndpointAddress), @@ -982,19 +962,15 @@ static int usb_serial_probe(struct usb_interface *interface, endpoint = interrupt_in_endpoint[i]; port = serial->port[i]; port->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!port->interrupt_in_urb) { - dev_err(ddev, "No free urbs available\n"); + if (!port->interrupt_in_urb) goto probe_error; - } buffer_size = usb_endpoint_maxp(endpoint); port->interrupt_in_endpointAddress = endpoint->bEndpointAddress; port->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL); - if (!port->interrupt_in_buffer) { - dev_err(ddev, "Couldn't allocate interrupt_in_buffer\n"); + if (!port->interrupt_in_buffer) goto probe_error; - } usb_fill_int_urb(port->interrupt_in_urb, dev, usb_rcvintpipe(dev, endpoint->bEndpointAddress), @@ -1011,20 +987,16 @@ static int usb_serial_probe(struct usb_interface *interface, endpoint = interrupt_out_endpoint[i]; port = serial->port[i]; port->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!port->interrupt_out_urb) { - dev_err(ddev, "No free urbs available\n"); + if (!port->interrupt_out_urb) goto probe_error; - } buffer_size = usb_endpoint_maxp(endpoint); port->interrupt_out_size = buffer_size; port->interrupt_out_endpointAddress = endpoint->bEndpointAddress; port->interrupt_out_buffer = kmalloc(buffer_size, GFP_KERNEL); - if (!port->interrupt_out_buffer) { - dev_err(ddev, "Couldn't allocate interrupt_out_buffer\n"); + if (!port->interrupt_out_buffer) goto probe_error; - } usb_fill_int_urb(port->interrupt_out_urb, dev, usb_sndintpipe(dev, endpoint->bEndpointAddress), @@ -1113,13 +1085,15 @@ static void usb_serial_disconnect(struct usb_interface *interface) tty_vhangup(tty); tty_kref_put(tty); } - kill_traffic(port); + usb_serial_port_poison_urbs(port); + wake_up_interruptible(&port->port.delta_msr_wait); cancel_work_sync(&port->work); if (device_is_registered(&port->dev)) device_del(&port->dev); } } - serial->type->disconnect(serial); + if (serial->type->disconnect) + serial->type->disconnect(serial); /* let the last holder of this object cause it to be cleaned up */ usb_serial_put(serial); @@ -1134,6 +1108,11 @@ int usb_serial_suspend(struct usb_interface *intf, pm_message_t message) serial->suspending = 1; + /* + * serial->type->suspend() MUST return 0 in system sleep context, + * otherwise, the resume callback has to recover device from + * previous suspend failure. + */ if (serial->type->suspend) { r = serial->type->suspend(serial, message); if (r < 0) { @@ -1145,7 +1124,7 @@ int usb_serial_suspend(struct usb_interface *intf, pm_message_t message) for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; if (port) - kill_traffic(port); + usb_serial_port_poison_urbs(port); } err_out: @@ -1153,11 +1132,25 @@ err_out: } EXPORT_SYMBOL(usb_serial_suspend); +static void usb_serial_unpoison_port_urbs(struct usb_serial *serial) +{ + struct usb_serial_port *port; + int i; + + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + if (port) + usb_serial_port_unpoison_urbs(port); + } +} + int usb_serial_resume(struct usb_interface *intf) { struct usb_serial *serial = usb_get_intfdata(intf); int rv; + usb_serial_unpoison_port_urbs(serial); + serial->suspending = 0; if (serial->type->resume) rv = serial->type->resume(serial); @@ -1173,6 +1166,8 @@ static int usb_serial_reset_resume(struct usb_interface *intf) struct usb_serial *serial = usb_get_intfdata(intf); int rv; + usb_serial_unpoison_port_urbs(serial); + serial->suspending = 0; if (serial->type->reset_resume) rv = serial->type->reset_resume(serial); @@ -1309,12 +1304,12 @@ module_exit(usb_serial_exit); do { \ if (!type->function) { \ type->function = usb_serial_generic_##function; \ - pr_debug("Had to override the " #function \ - " usb serial operation with the generic one.");\ - } \ + pr_debug("%s: using generic " #function "\n", \ + type->driver.name); \ + } \ } while (0) -static void fixup_generic(struct usb_serial_driver *device) +static void usb_serial_operations_init(struct usb_serial_driver *device) { set_to_generic_if_null(device, open); set_to_generic_if_null(device, write); @@ -1323,8 +1318,6 @@ static void fixup_generic(struct usb_serial_driver *device) set_to_generic_if_null(device, chars_in_buffer); set_to_generic_if_null(device, read_bulk_callback); set_to_generic_if_null(device, write_bulk_callback); - set_to_generic_if_null(device, disconnect); - set_to_generic_if_null(device, release); set_to_generic_if_null(device, process_read_urb); set_to_generic_if_null(device, prepare_write_buffer); } @@ -1336,8 +1329,6 @@ static int usb_serial_register(struct usb_serial_driver *driver) if (usb_disabled()) return -ENODEV; - fixup_generic(driver); - if (!driver->description) driver->description = driver->driver.name; if (!driver->usb_driver) { @@ -1346,6 +1337,8 @@ static int usb_serial_register(struct usb_serial_driver *driver) return -EINVAL; } + usb_serial_operations_init(driver); + /* Add this device to our list of devices */ mutex_lock(&table_lock); list_add(&driver->driver_list, &usb_serial_driver_list); @@ -1463,7 +1456,6 @@ void usb_serial_deregister_drivers(struct usb_serial_driver *const serial_driver } EXPORT_SYMBOL_GPL(usb_serial_deregister_drivers); -/* Module information */ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 571965aa1cc..ece326ef63a 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -421,20 +421,19 @@ void usb_wwan_close(struct usb_serial_port *port) portdata = usb_get_serial_port_data(port); - if (serial->dev) { - /* Stop reading/writing urbs */ - spin_lock_irq(&intfdata->susp_lock); - portdata->opened = 0; - spin_unlock_irq(&intfdata->susp_lock); + /* Stop reading/writing urbs */ + spin_lock_irq(&intfdata->susp_lock); + portdata->opened = 0; + spin_unlock_irq(&intfdata->susp_lock); - for (i = 0; i < N_IN_URB; i++) - usb_kill_urb(portdata->in_urbs[i]); - for (i = 0; i < N_OUT_URB; i++) - usb_kill_urb(portdata->out_urbs[i]); - /* balancing - important as an error cannot be handled*/ - usb_autopm_get_interface_no_resume(serial->interface); - serial->interface->needs_remote_wakeup = 0; - } + for (i = 0; i < N_IN_URB; i++) + usb_kill_urb(portdata->in_urbs[i]); + for (i = 0; i < N_OUT_URB; i++) + usb_kill_urb(portdata->out_urbs[i]); + + /* balancing - important as an error cannot be handled*/ + usb_autopm_get_interface_no_resume(serial->interface); + serial->interface->needs_remote_wakeup = 0; } EXPORT_SYMBOL(usb_wwan_close); diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 1129aa73c23..7573ec8a084 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -257,24 +257,18 @@ static void visor_close(struct usb_serial_port *port) { unsigned char *transfer_buffer; - /* shutdown our urbs */ usb_serial_generic_close(port); usb_kill_urb(port->interrupt_in_urb); - mutex_lock(&port->serial->disc_mutex); - if (!port->serial->disconnected) { - /* Try to send shutdown message, unless the device is gone */ - transfer_buffer = kmalloc(0x12, GFP_KERNEL); - if (transfer_buffer) { - usb_control_msg(port->serial->dev, + transfer_buffer = kmalloc(0x12, GFP_KERNEL); + if (!transfer_buffer) + return; + usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), VISOR_CLOSE_NOTIFICATION, 0xc2, 0x0000, 0x0000, transfer_buffer, 0x12, 300); - kfree(transfer_buffer); - } - } - mutex_unlock(&port->serial->disc_mutex); + kfree(transfer_buffer); } static void visor_read_int_callback(struct urb *urb) diff --git a/drivers/usb/serial/wishbone-serial.c b/drivers/usb/serial/wishbone-serial.c new file mode 100644 index 00000000000..100573c6f19 --- /dev/null +++ b/drivers/usb/serial/wishbone-serial.c @@ -0,0 +1,95 @@ +/* + * USB Wishbone-Serial adapter driver + * + * Copyright (C) 2013 Wesley W. Terpstra <w.terpstra@gsi.de> + * Copyright (C) 2013 GSI Helmholtz Centre for Heavy Ion Research GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/uaccess.h> + +#define GSI_VENDOR_OPENCLOSE 0xB0 + +static const struct usb_device_id id_table[] = { + { USB_DEVICE_AND_INTERFACE_INFO(0x1D50, 0x6062, 0xFF, 0xFF, 0xFF) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +/* + * Etherbone must be told that a new stream has begun before data arrives. + * This is necessary to restart the negotiation of Wishbone bus parameters. + * Similarly, when the stream ends, Etherbone must be told so that the cycle + * line can be driven low in the case that userspace failed to do so. + */ +static int usb_gsi_openclose(struct usb_serial_port *port, int value) +{ + struct usb_device *dev = port->serial->dev; + + return usb_control_msg( + dev, + usb_sndctrlpipe(dev, 0), /* Send to EP0OUT */ + GSI_VENDOR_OPENCLOSE, + USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, + value, /* wValue = device is open(1) or closed(0) */ + port->serial->interface->cur_altsetting->desc.bInterfaceNumber, + NULL, 0, /* There is no data stage */ + 5000); /* Timeout till operation fails */ +} + +static int wishbone_serial_open(struct tty_struct *tty, + struct usb_serial_port *port) +{ + int retval; + + retval = usb_gsi_openclose(port, 1); + if (retval) { + dev_err(&port->serial->dev->dev, + "Could not mark device as open (%d)\n", + retval); + return retval; + } + + retval = usb_serial_generic_open(tty, port); + if (retval) + usb_gsi_openclose(port, 0); + + return retval; +} + +static void wishbone_serial_close(struct usb_serial_port *port) +{ + usb_serial_generic_close(port); + usb_gsi_openclose(port, 0); +} + +static struct usb_serial_driver wishbone_serial_device = { + .driver = { + .owner = THIS_MODULE, + .name = "wishbone_serial", + }, + .id_table = id_table, + .num_ports = 1, + .open = &wishbone_serial_open, + .close = &wishbone_serial_close, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &wishbone_serial_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_AUTHOR("Wesley W. Terpstra <w.terpstra@gsi.de>"); +MODULE_DESCRIPTION("USB Wishbone-Serial adapter"); +MODULE_LICENSE("GPL"); |