diff options
Diffstat (limited to 'drivers/usb')
334 files changed, 9782 insertions, 13407 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 4c90b510d01..640ae6c6d2d 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -37,6 +37,7 @@ config USB_ARCH_HAS_EHCI default y if ARCH_W90X900 default y if ARCH_AT91 default y if ARCH_MXC + default y if ARCH_MXS default y if ARCH_OMAP3 default y if ARCH_CNS3XXX default y if ARCH_VT8500 diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index f5ed3d75fa5..8f5ebced5df 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -46,7 +46,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/ obj-$(CONFIG_USB_SERIAL) += serial/ obj-$(CONFIG_USB) += misc/ -obj-$(CONFIG_USB_COMMON) += phy/ +obj-$(CONFIG_USB_OTG_UTILS) += phy/ obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/ obj-$(CONFIG_USB_ATM) += atm/ diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c index 6f3b6e26739..fe815ecd557 100644 --- a/drivers/usb/c67x00/c67x00-drv.c +++ b/drivers/usb/c67x00/c67x00-drv.c @@ -116,7 +116,7 @@ static irqreturn_t c67x00_irq(int irq, void *__dev) /* ------------------------------------------------------------------------- */ -static int __devinit c67x00_drv_probe(struct platform_device *pdev) +static int c67x00_drv_probe(struct platform_device *pdev) { struct c67x00_device *c67x00; struct c67x00_platform_data *pdata; @@ -191,7 +191,7 @@ static int __devinit c67x00_drv_probe(struct platform_device *pdev) return ret; } -static int __devexit c67x00_drv_remove(struct platform_device *pdev) +static int c67x00_drv_remove(struct platform_device *pdev) { struct c67x00_device *c67x00 = platform_get_drvdata(pdev); struct resource *res; @@ -219,7 +219,7 @@ static int __devexit c67x00_drv_remove(struct platform_device *pdev) static struct platform_driver c67x00_driver = { .probe = c67x00_drv_probe, - .remove = __devexit_p(c67x00_drv_remove), + .remove = c67x00_drv_remove, .driver = { .owner = THIS_MODULE, .name = "c67x00", diff --git a/drivers/usb/c67x00/c67x00-ll-hpi.c b/drivers/usb/c67x00/c67x00-ll-hpi.c index a9636f43bca..3a1ca4dfc83 100644 --- a/drivers/usb/c67x00/c67x00-ll-hpi.c +++ b/drivers/usb/c67x00/c67x00-ll-hpi.c @@ -237,7 +237,7 @@ void c67x00_ll_hpi_disable_sofeop(struct c67x00_sie *sie) /* -------------------------------------------------------------------------- */ /* Transactions */ -static inline u16 ll_recv_msg(struct c67x00_device *dev) +static inline int ll_recv_msg(struct c67x00_device *dev) { u16 res; diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c index a03fbc15fa9..aa491627a45 100644 --- a/drivers/usb/c67x00/c67x00-sched.c +++ b/drivers/usb/c67x00/c67x00-sched.c @@ -100,7 +100,7 @@ struct c67x00_urb_priv { #define TD_PIDEP_OFFSET 0x04 #define TD_PIDEPMASK_PID 0xF0 #define TD_PIDEPMASK_EP 0x0F -#define TD_PORTLENMASK_DL 0x02FF +#define TD_PORTLENMASK_DL 0x03FF #define TD_PORTLENMASK_PN 0xC000 #define TD_STATUS_OFFSET 0x07 @@ -590,7 +590,7 @@ static int c67x00_create_td(struct c67x00_hcd *c67x00, struct urb *urb, { struct c67x00_td *td; struct c67x00_urb_priv *urbp = urb->hcpriv; - const __u8 active_flag = 1, retry_cnt = 1; + const __u8 active_flag = 1, retry_cnt = 3; __u8 cmd = 0; int tt = 0; diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index 1ea932a1368..608a2aeb400 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -20,6 +20,7 @@ config USB_CHIPIDEA_UDC config USB_CHIPIDEA_HOST bool "ChipIdea host controller" depends on USB=y || USB=USB_CHIPIDEA + depends on USB_EHCI_HCD select USB_EHCI_ROOT_HUB_TT help Say Y here to enable host controller functionality of the diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c index 0f5ca4bea17..8c291220be7 100644 --- a/drivers/usb/chipidea/ci13xxx_imx.c +++ b/drivers/usb/chipidea/ci13xxx_imx.c @@ -85,7 +85,7 @@ EXPORT_SYMBOL_GPL(usbmisc_get_init_data); /* End of common functions shared by usbmisc drivers*/ -static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata = { +static struct ci13xxx_platform_data ci13xxx_imx_platdata = { .name = "ci13xxx_imx", .flags = CI13XXX_REQUIRE_TRANSCEIVER | CI13XXX_PULLUP_ON_VBUS | @@ -93,7 +93,7 @@ static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata = { .capoffset = DEF_CAPOFFSET, }; -static int __devinit ci13xxx_imx_probe(struct platform_device *pdev) +static int ci13xxx_imx_probe(struct platform_device *pdev) { struct ci13xxx_imx_data *data; struct platform_device *plat_ci, *phy_pdev; @@ -220,7 +220,7 @@ put_np: return ret; } -static int __devexit ci13xxx_imx_remove(struct platform_device *pdev) +static int ci13xxx_imx_remove(struct platform_device *pdev) { struct ci13xxx_imx_data *data = platform_get_drvdata(pdev); @@ -252,7 +252,7 @@ MODULE_DEVICE_TABLE(of, ci13xxx_imx_dt_ids); static struct platform_driver ci13xxx_imx_driver = { .probe = ci13xxx_imx_probe, - .remove = __devexit_p(ci13xxx_imx_remove), + .remove = ci13xxx_imx_remove, .driver = { .name = "imx_usb", .owner = THIS_MODULE, diff --git a/drivers/usb/chipidea/ci13xxx_imx.h b/drivers/usb/chipidea/ci13xxx_imx.h index 2e88accb3d6..9cd2e910b1c 100644 --- a/drivers/usb/chipidea/ci13xxx_imx.h +++ b/drivers/usb/chipidea/ci13xxx_imx.h @@ -19,7 +19,7 @@ struct usbmisc_usb_device { struct device *dev; /* usb controller device */ int index; - int disable_oc:1; /* over current detect disabled */ + unsigned int disable_oc:1; /* over current detect disabled */ }; int usbmisc_set_ops(const struct usbmisc_ops *ops); diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c index b01feb3be92..7d16681fd3d 100644 --- a/drivers/usb/chipidea/ci13xxx_msm.c +++ b/drivers/usb/chipidea/ci13xxx_msm.c @@ -55,7 +55,7 @@ static struct ci13xxx_platform_data ci13xxx_msm_platdata = { .notify_event = ci13xxx_msm_notify_event, }; -static int __devinit ci13xxx_msm_probe(struct platform_device *pdev) +static int ci13xxx_msm_probe(struct platform_device *pdev) { struct platform_device *plat_ci; @@ -77,7 +77,7 @@ static int __devinit ci13xxx_msm_probe(struct platform_device *pdev) return 0; } -static int __devexit ci13xxx_msm_remove(struct platform_device *pdev) +static int ci13xxx_msm_remove(struct platform_device *pdev) { struct platform_device *plat_ci = platform_get_drvdata(pdev); @@ -89,7 +89,7 @@ static int __devexit ci13xxx_msm_remove(struct platform_device *pdev) static struct platform_driver ci13xxx_msm_driver = { .probe = ci13xxx_msm_probe, - .remove = __devexit_p(ci13xxx_msm_remove), + .remove = ci13xxx_msm_remove, .driver = { .name = "msm_hsusb", }, }; diff --git a/drivers/usb/chipidea/ci13xxx_pci.c b/drivers/usb/chipidea/ci13xxx_pci.c index 918e14971f2..9b227e39299 100644 --- a/drivers/usb/chipidea/ci13xxx_pci.c +++ b/drivers/usb/chipidea/ci13xxx_pci.c @@ -48,7 +48,7 @@ struct ci13xxx_platform_data penwell_pci_platdata = { * Allocates basic PCI resources for this USB device controller, and then * invokes the udc_probe() method to start the UDC associated with it */ -static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev, +static int ci13xxx_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct ci13xxx_platform_data *platdata = (void *)id->driver_data; @@ -107,7 +107,7 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev, * first invoking the udc_remove() and then releases * all PCI resources allocated for this USB device controller */ -static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev) +static void ci13xxx_pci_remove(struct pci_dev *pdev) { struct platform_device *plat_ci = pci_get_drvdata(pdev); @@ -147,7 +147,7 @@ static struct pci_driver ci13xxx_pci_driver = { .name = UDC_DRIVER_NAME, .id_table = ci13xxx_pci_id_table, .probe = ci13xxx_pci_probe, - .remove = __devexit_p(ci13xxx_pci_remove), + .remove = ci13xxx_pci_remove, }; module_pci_driver(ci13xxx_pci_driver); diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index f69d029b460..57cae1f897b 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -385,12 +385,13 @@ EXPORT_SYMBOL_GPL(ci13xxx_add_device); void ci13xxx_remove_device(struct platform_device *pdev) { + int id = pdev->id; platform_device_unregister(pdev); - ida_simple_remove(&ci_ida, pdev->id); + ida_simple_remove(&ci_ida, id); } EXPORT_SYMBOL_GPL(ci13xxx_remove_device); -static int __devinit ci_hdrc_probe(struct platform_device *pdev) +static int ci_hdrc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct ci13xxx *ci; @@ -410,7 +411,7 @@ static int __devinit ci_hdrc_probe(struct platform_device *pdev) } base = devm_request_and_ioremap(dev, res); - if (!res) { + if (!base) { dev_err(dev, "can't request and ioremap resource\n"); return -ENOMEM; } @@ -508,7 +509,7 @@ rm_wq: return ret; } -static int __devexit ci_hdrc_remove(struct platform_device *pdev) +static int ci_hdrc_remove(struct platform_device *pdev) { struct ci13xxx *ci = platform_get_drvdata(pdev); @@ -523,7 +524,7 @@ static int __devexit ci_hdrc_remove(struct platform_device *pdev) static struct platform_driver ci_hdrc_driver = { .probe = ci_hdrc_probe, - .remove = __devexit_p(ci_hdrc_remove), + .remove = ci_hdrc_remove, .driver = { .name = "ci_hdrc", }, diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c index c6f50a25756..a62c4a47d52 100644 --- a/drivers/usb/chipidea/debug.c +++ b/drivers/usb/chipidea/debug.c @@ -160,9 +160,6 @@ static ssize_t show_device(struct device *dev, struct device_attribute *attr, gadget->speed); n += scnprintf(buf + n, PAGE_SIZE - n, "max_speed = %d\n", gadget->max_speed); - /* TODO: Scheduled for removal in 3.8. */ - n += scnprintf(buf + n, PAGE_SIZE - n, "is_dualspeed = %d\n", - gadget_is_dualspeed(gadget)); n += scnprintf(buf + n, PAGE_SIZE - n, "is_otg = %d\n", gadget->is_otg); n += scnprintf(buf + n, PAGE_SIZE - n, "is_a_peripheral = %d\n", @@ -225,7 +222,7 @@ static struct { } dbg_data = { .idx = 0, .tty = 0, - .lck = __RW_LOCK_UNLOCKED(lck) + .lck = __RW_LOCK_UNLOCKED(dbg_data.lck) }; /** diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index ebff9f4f56e..8e9d31277c4 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -20,77 +20,18 @@ */ #include <linux/kernel.h> +#include <linux/io.h> #include <linux/usb.h> #include <linux/usb/hcd.h> #include <linux/usb/chipidea.h> -#define CHIPIDEA_EHCI -#include "../host/ehci-hcd.c" +#include "../host/ehci.h" #include "ci.h" #include "bits.h" #include "host.h" -static int ci_ehci_setup(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int ret; - - hcd->has_tt = 1; - - ret = ehci_setup(hcd); - if (ret) - return ret; - - ehci_port_power(ehci, 0); - - return ret; -} - -static const struct hc_driver ci_ehci_hc_driver = { - .description = "ehci_hcd", - .product_desc = "ChipIdea HDRC EHCI", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - /* - * basic lifecycle operations - */ - .reset = ci_ehci_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; +static struct hc_driver __read_mostly ci_ehci_hc_driver; static irqreturn_t host_irq(struct ci13xxx *ci) { @@ -129,6 +70,9 @@ static int host_start(struct ci13xxx *ci) else ci->hcd = hcd; + if (ci->platdata->flags & CI13XXX_DISABLE_STREAMING) + hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS); + return ret; } @@ -157,5 +101,7 @@ int ci_hdrc_host_init(struct ci13xxx *ci) rdrv->name = "host"; ci->roles[CI_ROLE_HOST] = rdrv; + ehci_init_driver(&ci_ehci_hc_driver, NULL); + return 0; } diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 2f45bba8561..f64fbea1cf2 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1767,7 +1767,7 @@ static int udc_start(struct ci13xxx *ci) goto put_transceiver; } - retval = dbg_create_files(&ci->gadget.dev); + retval = dbg_create_files(ci->dev); if (retval) goto unreg_device; @@ -1796,7 +1796,7 @@ remove_trans: dev_err(dev, "error = %i\n", retval); remove_dbg: - dbg_remove_files(&ci->gadget.dev); + dbg_remove_files(ci->dev); unreg_device: device_unregister(&ci->gadget.dev); put_transceiver: @@ -1836,7 +1836,7 @@ static void udc_stop(struct ci13xxx *ci) if (ci->global_phy) usb_put_phy(ci->transceiver); } - dbg_remove_files(&ci->gadget.dev); + dbg_remove_files(ci->dev); device_unregister(&ci->gadget.dev); /* my kobject is dynamic, I swear! */ memset(&ci->gadget, 0, sizeof(ci->gadget)); diff --git a/drivers/usb/chipidea/usbmisc_imx6q.c b/drivers/usb/chipidea/usbmisc_imx6q.c index 416e3fc58fd..a1bce391e82 100644 --- a/drivers/usb/chipidea/usbmisc_imx6q.c +++ b/drivers/usb/chipidea/usbmisc_imx6q.c @@ -82,7 +82,7 @@ static const struct of_device_id usbmisc_imx6q_dt_ids[] = { { /* sentinel */ } }; -static int __devinit usbmisc_imx6q_probe(struct platform_device *pdev) +static int usbmisc_imx6q_probe(struct platform_device *pdev) { struct resource *res; struct imx6q_usbmisc *data; @@ -98,9 +98,9 @@ static int __devinit usbmisc_imx6q_probe(struct platform_device *pdev) spin_lock_init(&data->lock); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - data->base = devm_request_and_ioremap(&pdev->dev, res); - if (!data->base) - return -EADDRNOTAVAIL; + data->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(data->base)) + return PTR_ERR(data->base); data->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(data->clk)) { @@ -127,7 +127,7 @@ static int __devinit usbmisc_imx6q_probe(struct platform_device *pdev) return 0; } -static int __devexit usbmisc_imx6q_remove(struct platform_device *pdev) +static int usbmisc_imx6q_remove(struct platform_device *pdev) { usbmisc_unset_ops(&imx6q_usbmisc_ops); clk_disable_unprepare(usbmisc->clk); @@ -136,7 +136,7 @@ static int __devexit usbmisc_imx6q_remove(struct platform_device *pdev) static struct platform_driver usbmisc_imx6q_driver = { .probe = usbmisc_imx6q_probe, - .remove = __devexit_p(usbmisc_imx6q_remove), + .remove = usbmisc_imx6q_remove, .driver = { .name = "usbmisc_imx6q", .owner = THIS_MODULE, diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig index 2519e320098..316aac8e4ca 100644 --- a/drivers/usb/class/Kconfig +++ b/drivers/usb/class/Kconfig @@ -6,7 +6,7 @@ comment "USB Device Class drivers" config USB_ACM tristate "USB Modem (CDC ACM) support" - depends on USB + depends on USB && TTY ---help--- This driver supports USB modems and ISDN adapters which support the Communication Device Class Abstract Control Model interface. diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 278bf5256a9..cb8ef3ef5c9 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -410,19 +410,12 @@ static int acm_submit_read_urbs(struct acm *acm, gfp_t mem_flags) static void acm_process_read_urb(struct acm *acm, struct urb *urb) { - struct tty_struct *tty; - if (!urb->actual_length) return; - tty = tty_port_tty_get(&acm->port); - if (!tty) - return; - - tty_insert_flip_string(tty, urb->transfer_buffer, urb->actual_length); - tty_flip_buffer_push(tty); - - tty_kref_put(tty); + tty_insert_flip_string(&acm->port, urb->transfer_buffer, + urb->actual_length); + tty_flip_buffer_push(&acm->port); } static void acm_read_bulk_callback(struct urb *urb) @@ -787,6 +780,10 @@ static int get_serial_info(struct acm *acm, struct serial_struct __user *info) tmp.flags = ASYNC_LOW_LATENCY; tmp.xmit_fifo_size = acm->writesize; tmp.baud_base = le32_to_cpu(acm->line.dwDTERate); + tmp.close_delay = acm->port.close_delay / 10; + tmp.closing_wait = acm->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ? + ASYNC_CLOSING_WAIT_NONE : + acm->port.closing_wait / 10; if (copy_to_user(info, &tmp, sizeof(tmp))) return -EFAULT; @@ -794,6 +791,37 @@ static int get_serial_info(struct acm *acm, struct serial_struct __user *info) return 0; } +static int set_serial_info(struct acm *acm, + struct serial_struct __user *newinfo) +{ + struct serial_struct new_serial; + unsigned int closing_wait, close_delay; + int retval = 0; + + if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) + return -EFAULT; + + close_delay = new_serial.close_delay * 10; + closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ? + ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10; + + mutex_lock(&acm->port.mutex); + + if (!capable(CAP_SYS_ADMIN)) { + if ((close_delay != acm->port.close_delay) || + (closing_wait != acm->port.closing_wait)) + retval = -EPERM; + else + retval = -EOPNOTSUPP; + } else { + acm->port.close_delay = close_delay; + acm->port.closing_wait = closing_wait; + } + + mutex_unlock(&acm->port.mutex); + return retval; +} + static int acm_tty_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { @@ -804,6 +832,9 @@ static int acm_tty_ioctl(struct tty_struct *tty, case TIOCGSERIAL: /* gets serial port data */ rv = get_serial_info(acm, (struct serial_struct __user *) arg); break; + case TIOCSSERIAL: + rv = set_serial_info(acm, (struct serial_struct __user *) arg); + break; } return rv; @@ -1568,6 +1599,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0572, 0x1340), /* Conexant CX93010-2x UCMxx */ .driver_info = NO_UNION_NORMAL, }, + { USB_DEVICE(0x05f9, 0x4002), /* PSC Scanning, Magellan 800i */ + .driver_info = NO_UNION_NORMAL, + }, { USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ }, diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 5f0cb417b73..122d056d96d 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -56,6 +56,7 @@ MODULE_DEVICE_TABLE (usb, wdm_ids); #define WDM_RESPONDING 7 #define WDM_SUSPENDING 8 #define WDM_RESETTING 9 +#define WDM_OVERFLOW 10 #define WDM_MAX 16 @@ -155,6 +156,7 @@ static void wdm_in_callback(struct urb *urb) { struct wdm_device *desc = urb->context; int status = urb->status; + int length = urb->actual_length; spin_lock(&desc->iuspin); clear_bit(WDM_RESPONDING, &desc->flags); @@ -185,9 +187,17 @@ static void wdm_in_callback(struct urb *urb) } desc->rerr = status; - desc->reslength = urb->actual_length; - memmove(desc->ubuf + desc->length, desc->inbuf, desc->reslength); - desc->length += desc->reslength; + if (length + desc->length > desc->wMaxCommand) { + /* The buffer would overflow */ + set_bit(WDM_OVERFLOW, &desc->flags); + } else { + /* we may already be in overflow */ + if (!test_bit(WDM_OVERFLOW, &desc->flags)) { + memmove(desc->ubuf + desc->length, desc->inbuf, length); + desc->length += length; + desc->reslength = length; + } + } skip_error: wake_up(&desc->wait); @@ -435,6 +445,11 @@ retry: rv = -ENODEV; goto err; } + if (test_bit(WDM_OVERFLOW, &desc->flags)) { + clear_bit(WDM_OVERFLOW, &desc->flags); + rv = -ENOBUFS; + goto err; + } i++; if (file->f_flags & O_NONBLOCK) { if (!test_bit(WDM_READ, &desc->flags)) { @@ -478,6 +493,7 @@ retry: spin_unlock_irq(&desc->iuspin); goto retry; } + if (!desc->reslength) { /* zero length read */ dev_dbg(&desc->intf->dev, "%s: zero length - clearing WDM_READ\n", __func__); clear_bit(WDM_READ, &desc->flags); @@ -1004,6 +1020,7 @@ static int wdm_post_reset(struct usb_interface *intf) struct wdm_device *desc = wdm_find_device(intf); int rv; + clear_bit(WDM_OVERFLOW, &desc->flags); clear_bit(WDM_RESETTING, &desc->flags); rv = recover_from_urb_loss(desc); mutex_unlock(&desc->wlock); diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile index 26059b93dbf..5e847ad2f58 100644 --- a/drivers/usb/core/Makefile +++ b/drivers/usb/core/Makefile @@ -7,6 +7,7 @@ ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG usbcore-y := usb.o hub.o hcd.o urb.o message.o driver.o usbcore-y += config.o file.o buffer.o sysfs.o endpoint.o usbcore-y += devio.o notify.o generic.o quirks.o devices.o +usbcore-y += port.o usbcore-$(CONFIG_PCI) += hcd-pci.o usbcore-$(CONFIG_ACPI) += usb-acpi.o diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index f460de31ace..2a3bbdf7eb9 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -316,17 +316,23 @@ static char *usb_dump_iad_descriptor(char *start, char *end, */ static char *usb_dump_config_descriptor(char *start, char *end, const struct usb_config_descriptor *desc, - int active) + int active, int speed) { + int mul; + if (start > end) return start; + if (speed == USB_SPEED_SUPER) + mul = 8; + else + mul = 2; start += sprintf(start, format_config, /* mark active/actual/current cfg. */ active ? '*' : ' ', desc->bNumInterfaces, desc->bConfigurationValue, desc->bmAttributes, - desc->bMaxPower * 2); + desc->bMaxPower * mul); return start; } @@ -342,7 +348,8 @@ static char *usb_dump_config(int speed, char *start, char *end, if (!config) /* getting these some in 2.3.7; none in 2.3.6 */ return start + sprintf(start, "(null Cfg. desc.)\n"); - start = usb_dump_config_descriptor(start, end, &config->desc, active); + start = usb_dump_config_descriptor(start, end, &config->desc, active, + speed); for (i = 0; i < USB_MAXIADS; i++) { if (config->intf_assoc[i] == NULL) break; @@ -591,16 +598,14 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes, /* Now look at all of this device's children. */ usb_hub_for_each_child(usbdev, chix, childdev) { - if (childdev) { - usb_lock_device(childdev); - ret = usb_device_dump(buffer, nbytes, skip_bytes, - file_offset, childdev, bus, - level + 1, chix - 1, ++cnt); - usb_unlock_device(childdev); - if (ret == -EFAULT) - return total_written; - total_written += ret; - } + usb_lock_device(childdev); + ret = usb_device_dump(buffer, nbytes, skip_bytes, + file_offset, childdev, bus, + level + 1, chix - 1, ++cnt); + usb_unlock_device(childdev); + if (ret == -EFAULT) + return total_written; + total_written += ret; } return total_written; } @@ -660,7 +665,7 @@ static loff_t usb_device_lseek(struct file *file, loff_t offset, int orig) { loff_t ret; - mutex_lock(&file->f_dentry->d_inode->i_mutex); + mutex_lock(&file_inode(file)->i_mutex); switch (orig) { case 0: @@ -676,7 +681,7 @@ static loff_t usb_device_lseek(struct file *file, loff_t offset, int orig) ret = -EINVAL; } - mutex_unlock(&file->f_dentry->d_inode->i_mutex); + mutex_unlock(&file_inode(file)->i_mutex); return ret; } diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index b78fbe222b7..8823e98989f 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -40,6 +40,7 @@ #include <linux/signal.h> #include <linux/poll.h> #include <linux/module.h> +#include <linux/string.h> #include <linux/usb.h> #include <linux/usbdevice_fs.h> #include <linux/usb/hcd.h> /* for usbcore internals */ @@ -160,7 +161,7 @@ static loff_t usbdev_lseek(struct file *file, loff_t offset, int orig) { loff_t ret; - mutex_lock(&file->f_dentry->d_inode->i_mutex); + mutex_lock(&file_inode(file)->i_mutex); switch (orig) { case 0: @@ -176,7 +177,7 @@ static loff_t usbdev_lseek(struct file *file, loff_t offset, int orig) ret = -EINVAL; } - mutex_unlock(&file->f_dentry->d_inode->i_mutex); + mutex_unlock(&file_inode(file)->i_mutex); return ret; } @@ -1077,7 +1078,7 @@ static int proc_getdriver(struct dev_state *ps, void __user *arg) if (!intf || !intf->dev.driver) ret = -ENODATA; else { - strncpy(gd.driver, intf->dev.driver->name, + strlcpy(gd.driver, intf->dev.driver->name, sizeof(gd.driver)); ret = (copy_to_user(arg, &gd, sizeof(gd)) ? -EFAULT : 0); } @@ -1970,7 +1971,7 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd, void __user *p) { struct dev_state *ps = file->private_data; - struct inode *inode = file->f_path.dentry->d_inode; + struct inode *inode = file_inode(file); struct usb_device *dev = ps->dev; int ret = -ENOTTY; diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 6056db7af41..d938b2b99e3 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -32,8 +32,6 @@ #include "usb.h" -#ifdef CONFIG_HOTPLUG - /* * Adds a new dynamic USBdevice ID to this driver, * and cause the driver to probe for all devices again. @@ -194,20 +192,6 @@ static void usb_free_dynids(struct usb_driver *usb_drv) } spin_unlock(&usb_drv->dynids.lock); } -#else -static inline int usb_create_newid_files(struct usb_driver *usb_drv) -{ - return 0; -} - -static void usb_remove_newid_files(struct usb_driver *usb_drv) -{ -} - -static inline void usb_free_dynids(struct usb_driver *usb_drv) -{ -} -#endif static const struct usb_device_id *usb_match_dynamic_id(struct usb_interface *intf, struct usb_driver *drv) @@ -238,7 +222,7 @@ static int usb_probe_device(struct device *dev) /* TODO: Add real matching code */ /* The device should always appear to be in use - * unless the driver suports autosuspend. + * unless the driver supports autosuspend. */ if (!udriver->supports_autosuspend) error = usb_autoresume_device(udev); @@ -790,7 +774,6 @@ static int usb_device_match(struct device *dev, struct device_driver *drv) return 0; } -#ifdef CONFIG_HOTPLUG static int usb_uevent(struct device *dev, struct kobj_uevent_env *env) { struct usb_device *usb_dev; @@ -832,14 +815,6 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env) return 0; } -#else - -static int usb_uevent(struct device *dev, struct kobj_uevent_env *env) -{ - return -ENODEV; -} -#endif /* CONFIG_HOTPLUG */ - /** * usb_register_device_driver - register a USB device (not interface) driver * @new_udriver: USB operations for the device driver diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c index 69ecd3c9231..271e761f563 100644 --- a/drivers/usb/core/generic.c +++ b/drivers/usb/core/generic.c @@ -47,6 +47,9 @@ int usb_choose_configuration(struct usb_device *udev) int insufficient_power = 0; struct usb_host_config *c, *best; + if (usb_device_is_owned(udev)) + return 0; + best = NULL; c = udev->config; num_configs = udev->descriptor.bNumConfigurations; @@ -97,7 +100,7 @@ int usb_choose_configuration(struct usb_device *udev) */ /* Rule out configs that draw too much bus current */ - if (c->desc.bMaxPower * 2 > udev->bus_mA) { + if (usb_get_max_power(udev, c) > udev->bus_mA) { insufficient_power++; continue; } @@ -160,9 +163,7 @@ static int generic_probe(struct usb_device *udev) /* Choose and set the configuration. This registers the interfaces * with the driver core and lets interface drivers bind to them. */ - if (usb_device_is_owned(udev)) - ; /* Don't configure if the device is owned */ - else if (udev->authorized == 0) + if (udev->authorized == 0) dev_err(&udev->dev, "Device is not authorized for usage\n"); else { c = usb_choose_configuration(udev); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 1e741bca026..99b34a30354 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -39,6 +39,7 @@ #include <asm/unaligned.h> #include <linux/platform_device.h> #include <linux/workqueue.h> +#include <linux/pm_runtime.h> #include <linux/usb.h> #include <linux/usb/hcd.h> @@ -619,6 +620,10 @@ nongeneric: status = hcd->driver->hub_control (hcd, typeReq, wValue, wIndex, tbuf, wLength); + + if (typeReq == GetHubDescriptor) + usb_hub_adjust_deviceremovable(hcd->self.root_hub, + (struct usb_hub_descriptor *)tbuf); break; error: /* "protocol stall" on error */ @@ -1025,6 +1030,49 @@ static int register_root_hub(struct usb_hcd *hcd) return retval; } +/* + * usb_hcd_start_port_resume - a root-hub port is sending a resume signal + * @bus: the bus which the root hub belongs to + * @portnum: the port which is being resumed + * + * HCDs should call this function when they know that a resume signal is + * being sent to a root-hub port. The root hub will be prevented from + * going into autosuspend until usb_hcd_end_port_resume() is called. + * + * The bus's private lock must be held by the caller. + */ +void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum) +{ + unsigned bit = 1 << portnum; + + if (!(bus->resuming_ports & bit)) { + bus->resuming_ports |= bit; + pm_runtime_get_noresume(&bus->root_hub->dev); + } +} +EXPORT_SYMBOL_GPL(usb_hcd_start_port_resume); + +/* + * usb_hcd_end_port_resume - a root-hub port has stopped sending a resume signal + * @bus: the bus which the root hub belongs to + * @portnum: the port which is being resumed + * + * HCDs should call this function when they know that a resume signal has + * stopped being sent to a root-hub port. The root hub will be allowed to + * autosuspend again. + * + * The bus's private lock must be held by the caller. + */ +void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum) +{ + unsigned bit = 1 << portnum; + + if (bus->resuming_ports & bit) { + bus->resuming_ports &= ~bit; + pm_runtime_put_noidle(&bus->root_hub->dev); + } +} +EXPORT_SYMBOL_GPL(usb_hcd_end_port_resume); /*-------------------------------------------------------------------------*/ @@ -2039,8 +2087,9 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) status = hcd->driver->bus_resume(hcd); clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags); if (status == 0) { - /* TRSMRCY = 10 msec */ - msleep(10); + struct usb_device *udev; + int port1; + spin_lock_irq(&hcd_root_hub_lock); if (!HCD_DEAD(hcd)) { usb_set_device_state(rhdev, rhdev->actconfig @@ -2050,6 +2099,20 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) hcd->state = HC_STATE_RUNNING; } spin_unlock_irq(&hcd_root_hub_lock); + + /* + * Check whether any of the enabled ports on the root hub are + * unsuspended. If they are then a TRSMRCY delay is needed + * (this is what the USB-2 spec calls a "global resume"). + * Otherwise we can skip the delay. + */ + usb_hub_for_each_child(rhdev, port1, udev) { + if (udev->state != USB_STATE_NOTATTACHED && + !udev->port_is_suspended) { + usleep_range(10000, 11000); /* TRSMRCY */ + break; + } + } } else { hcd->state = old_state; dev_dbg(&rhdev->dev, "bus %s fail, err %d\n", @@ -2151,8 +2214,15 @@ EXPORT_SYMBOL_GPL(usb_bus_start_enum); irqreturn_t usb_hcd_irq (int irq, void *__hcd) { struct usb_hcd *hcd = __hcd; + unsigned long flags; irqreturn_t rc; + /* IRQF_DISABLED doesn't work correctly with shared IRQs + * when the first handler doesn't use it. So let's just + * assume it's never used. + */ + local_irq_save(flags); + if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd))) rc = IRQ_NONE; else if (hcd->driver->irq(hcd) == IRQ_NONE) @@ -2160,6 +2230,7 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd) else rc = IRQ_HANDLED; + local_irq_restore(flags); return rc; } EXPORT_SYMBOL_GPL(usb_hcd_irq); @@ -2347,6 +2418,14 @@ static int usb_hcd_request_irqs(struct usb_hcd *hcd, int retval; if (hcd->driver->irq) { + + /* IRQF_DISABLED doesn't work as advertised when used together + * with IRQF_SHARED. As usb_hcd_irq() will always disable + * interrupts we can remove it here. + */ + if (irqflags & IRQF_SHARED) + irqflags &= ~IRQF_DISABLED; + snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", hcd->driver->description, hcd->self.busnum); retval = request_irq(irqnum, &usb_hcd_irq, irqflags, @@ -2475,7 +2554,6 @@ int usb_add_hcd(struct usb_hcd *hcd, } /* starting here, usbcore will pay attention to this root hub */ - rhdev->bus_mA = min(500u, hcd->power_budget); if ((retval = register_root_hub(hcd)) != 0) goto err_register_root_hub; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 1af04bdeaf0..5480352f984 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -26,11 +26,12 @@ #include <linux/mutex.h> #include <linux/freezer.h> #include <linux/random.h> +#include <linux/pm_qos.h> #include <asm/uaccess.h> #include <asm/byteorder.h> -#include "usb.h" +#include "hub.h" /* if we are in debug mode, always announce new devices */ #ifdef DEBUG @@ -39,59 +40,8 @@ #endif #endif -struct usb_port { - struct usb_device *child; - struct device dev; - struct dev_state *port_owner; - enum usb_port_connect_type connect_type; -}; - -struct usb_hub { - struct device *intfdev; /* the "interface" device */ - struct usb_device *hdev; - struct kref kref; - struct urb *urb; /* for interrupt polling pipe */ - - /* buffer for urb ... with extra space in case of babble */ - char (*buffer)[8]; - union { - struct usb_hub_status hub; - struct usb_port_status port; - } *status; /* buffer for status reports */ - struct mutex status_mutex; /* for the status buffer */ - - int error; /* last reported error */ - int nerrors; /* track consecutive errors */ - - struct list_head event_list; /* hubs w/data or errs ready */ - unsigned long event_bits[1]; /* status change bitmask */ - unsigned long change_bits[1]; /* ports with logical connect - status change */ - unsigned long busy_bits[1]; /* ports being reset or - resumed */ - unsigned long removed_bits[1]; /* ports with a "removed" - device present */ - unsigned long wakeup_bits[1]; /* ports that have signaled - remote wakeup */ -#if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */ -#error event_bits[] is too short! -#endif - - struct usb_hub_descriptor *descriptor; /* class descriptor */ - struct usb_tt tt; /* Transaction Translator */ - - unsigned mA_per_port; /* current for each child */ - - unsigned limited_power:1; - unsigned quiescing:1; - unsigned disconnected:1; - - unsigned has_indicators:1; - u8 indicator[USB_MAXCHILDREN]; - struct delayed_work leds; - struct delayed_work init_work; - struct usb_port **ports; -}; +#define USB_VENDOR_GENESYS_LOGIC 0x05e3 +#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01 static inline int hub_is_superspeed(struct usb_device *hdev) { @@ -159,13 +109,10 @@ MODULE_PARM_DESC(use_both_schemes, DECLARE_RWSEM(ehci_cf_port_reset_rwsem); EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem); -#define HUB_DEBOUNCE_TIMEOUT 1500 +#define HUB_DEBOUNCE_TIMEOUT 2000 #define HUB_DEBOUNCE_STEP 25 #define HUB_DEBOUNCE_STABLE 100 -#define to_usb_port(_dev) \ - container_of(_dev, struct usb_port, dev) - static int usb_reset_and_verify_device(struct usb_device *udev); static inline char *portspeed(struct usb_hub *hub, int portstatus) @@ -181,7 +128,7 @@ static inline char *portspeed(struct usb_hub *hub, int portstatus) } /* Note that hdev or one of its children must be locked! */ -static struct usb_hub *hdev_to_hub(struct usb_device *hdev) +struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev) { if (!hdev || !hdev->actconfig || !hdev->maxchild) return NULL; @@ -355,7 +302,7 @@ static void usb_set_lpm_parameters(struct usb_device *udev) if (!udev->lpm_capable || udev->speed != USB_SPEED_SUPER) return; - hub = hdev_to_hub(udev->parent); + hub = usb_hub_to_struct_hub(udev->parent); /* It doesn't take time to transition the roothub into U0, since it * doesn't have an upstream link. */ @@ -447,7 +394,7 @@ static int clear_hub_feature(struct usb_device *hdev, int feature) /* * USB 2.0 spec Section 11.24.2.2 */ -static int clear_port_feature(struct usb_device *hdev, int port1, int feature) +int usb_clear_port_feature(struct usb_device *hdev, int port1, int feature) { return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature, port1, @@ -640,7 +587,7 @@ static void kick_khubd(struct usb_hub *hub) void usb_kick_khubd(struct usb_device *hdev) { - struct usb_hub *hub = hdev_to_hub(hdev); + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); if (hub) kick_khubd(hub); @@ -662,7 +609,7 @@ void usb_wakeup_notification(struct usb_device *hdev, if (!hdev) return; - hub = hdev_to_hub(hdev); + hub = usb_hub_to_struct_hub(hdev); if (hub) { set_bit(portnum, hub->wakeup_bits); kick_khubd(hub); @@ -736,7 +683,6 @@ static void hub_tt_work(struct work_struct *work) struct usb_hub *hub = container_of(work, struct usb_hub, tt.clear_work); unsigned long flags; - int limit = 100; spin_lock_irqsave (&hub->tt.lock, flags); while (!list_empty(&hub->tt.clear_list)) { @@ -746,9 +692,6 @@ static void hub_tt_work(struct work_struct *work) const struct hc_driver *drv; int status; - if (!hub->quiescing && --limit < 0) - break; - next = hub->tt.clear_list.next; clear = list_entry (next, struct usb_tt_clear, clear_list); list_del (&clear->clear_list); @@ -773,6 +716,32 @@ static void hub_tt_work(struct work_struct *work) } /** + * usb_hub_set_port_power - control hub port's power state + * @hdev: target hub + * @port1: port index + * @set: expected status + * + * call this function to control port's power via setting or + * clearing the port's PORT_POWER feature. + */ +int usb_hub_set_port_power(struct usb_device *hdev, int port1, + bool set) +{ + int ret; + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); + struct usb_port *port_dev = hub->ports[port1 - 1]; + + if (set) + ret = set_port_feature(hdev, port1, USB_PORT_FEAT_POWER); + else + ret = usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_POWER); + + if (!ret) + port_dev->power_is_on = set; + return ret; +} + +/** * usb_hub_clear_tt_buffer - clear control/bulk TT state in high speed hub * @urb: an URB associated with the failed or incomplete split transaction * @@ -848,7 +817,11 @@ static unsigned hub_power_on(struct usb_hub *hub, bool do_delay) dev_dbg(hub->intfdev, "trying to enable port power on " "non-switchable hub\n"); for (port1 = 1; port1 <= hub->descriptor->bNbrPorts; port1++) - set_port_feature(hub->hdev, port1, USB_PORT_FEAT_POWER); + if (hub->ports[port1 - 1]->power_is_on) + set_port_feature(hub->hdev, port1, USB_PORT_FEAT_POWER); + else + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_POWER); /* Wait at least 100 msec for power to become stable */ delay = max(pgood_delay, (unsigned) 100); @@ -876,6 +849,60 @@ static int hub_hub_status(struct usb_hub *hub, return ret; } +static int hub_set_port_link_state(struct usb_hub *hub, int port1, + unsigned int link_status) +{ + return set_port_feature(hub->hdev, + port1 | (link_status << 3), + USB_PORT_FEAT_LINK_STATE); +} + +/* + * If USB 3.0 ports are placed into the Disabled state, they will no longer + * detect any device connects or disconnects. This is generally not what the + * USB core wants, since it expects a disabled port to produce a port status + * change event when a new device connects. + * + * Instead, set the link state to Disabled, wait for the link to settle into + * that state, clear any change bits, and then put the port into the RxDetect + * state. + */ +static int hub_usb3_port_disable(struct usb_hub *hub, int port1) +{ + int ret; + int total_time; + u16 portchange, portstatus; + + if (!hub_is_superspeed(hub->hdev)) + return -EINVAL; + + ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED); + if (ret) { + dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n", + port1, ret); + return ret; + } + + /* Wait for the link to enter the disabled state. */ + for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) { + ret = hub_port_status(hub, port1, &portstatus, &portchange); + if (ret < 0) + return ret; + + if ((portstatus & USB_PORT_STAT_LINK_STATE) == + USB_SS_PORT_LS_SS_DISABLED) + break; + if (total_time >= HUB_DEBOUNCE_TIMEOUT) + break; + msleep(HUB_DEBOUNCE_STEP); + } + if (total_time >= HUB_DEBOUNCE_TIMEOUT) + dev_warn(hub->intfdev, "Could not disable port %d after %d ms\n", + port1, total_time); + + return hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_RX_DETECT); +} + static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) { struct usb_device *hdev = hub->hdev; @@ -884,8 +911,13 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) if (hub->ports[port1 - 1]->child && set_state) usb_set_device_state(hub->ports[port1 - 1]->child, USB_STATE_NOTATTACHED); - if (!hub->error && !hub_is_superspeed(hub->hdev)) - ret = clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE); + if (!hub->error) { + if (hub_is_superspeed(hub->hdev)) + ret = hub_usb3_port_disable(hub, port1); + else + ret = usb_clear_port_feature(hdev, port1, + USB_PORT_FEAT_ENABLE); + } if (ret) dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n", port1, ret); @@ -932,7 +964,7 @@ int usb_remove_device(struct usb_device *udev) if (!udev->parent) /* Can't remove a root hub */ return -EINVAL; - hub = hdev_to_hub(udev->parent); + hub = usb_hub_to_struct_hub(udev->parent); intf = to_usb_interface(hub->intfdev); usb_autopm_get_interface(intf); @@ -1064,7 +1096,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) * Do not disable USB3 protocol ports. */ if (!hub_is_superspeed(hdev)) { - clear_port_feature(hdev, port1, + usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE); portstatus &= ~USB_PORT_STAT_ENABLE; } else { @@ -1076,18 +1108,18 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) /* Clear status-change flags; we'll debounce later */ if (portchange & USB_PORT_STAT_C_CONNECTION) { need_debounce_delay = true; - clear_port_feature(hub->hdev, port1, + usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_CONNECTION); } if (portchange & USB_PORT_STAT_C_ENABLE) { need_debounce_delay = true; - clear_port_feature(hub->hdev, port1, + usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_ENABLE); } if ((portchange & USB_PORT_STAT_C_BH_RESET) && hub_is_superspeed(hub->hdev)) { need_debounce_delay = true; - clear_port_feature(hub->hdev, port1, + usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_BH_PORT_RESET); } /* We can forget about a "removed" device when there's a @@ -1121,10 +1153,16 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) set_bit(port1, hub->change_bits); } else if (udev->persist_enabled) { + struct usb_port *port_dev = hub->ports[port1 - 1]; + #ifdef CONFIG_PM udev->reset_resume = 1; #endif - set_bit(port1, hub->change_bits); + /* Don't set the change_bits when the device + * was powered off. + */ + if (port_dev->power_is_on) + set_bit(port1, hub->change_bits); } else { /* The power session is gone; tell khubd */ @@ -1234,52 +1272,6 @@ static int hub_post_reset(struct usb_interface *intf) return 0; } -static void usb_port_device_release(struct device *dev) -{ - struct usb_port *port_dev = to_usb_port(dev); - - kfree(port_dev); -} - -static void usb_hub_remove_port_device(struct usb_hub *hub, - int port1) -{ - device_unregister(&hub->ports[port1 - 1]->dev); -} - -struct device_type usb_port_device_type = { - .name = "usb_port", - .release = usb_port_device_release, -}; - -static int usb_hub_create_port_device(struct usb_hub *hub, - int port1) -{ - struct usb_port *port_dev = NULL; - int retval; - - port_dev = kzalloc(sizeof(*port_dev), GFP_KERNEL); - if (!port_dev) { - retval = -ENOMEM; - goto exit; - } - - hub->ports[port1 - 1] = port_dev; - port_dev->dev.parent = hub->intfdev; - port_dev->dev.type = &usb_port_device_type; - dev_set_name(&port_dev->dev, "port%d", port1); - - retval = device_register(&port_dev->dev); - if (retval) - goto error_register; - return 0; - -error_register: - put_device(&port_dev->dev); -exit: - return retval; -} - static int hub_configure(struct usb_hub *hub, struct usb_endpoint_descriptor *endpoint) { @@ -1291,6 +1283,8 @@ static int hub_configure(struct usb_hub *hub, unsigned int pipe; int maxp, ret, i; char *message = "out of memory"; + unsigned unit_load; + unsigned full_load; hub->buffer = kmalloc(sizeof(*hub->buffer), GFP_KERNEL); if (!hub->buffer) { @@ -1337,6 +1331,13 @@ static int hub_configure(struct usb_hub *hub, } wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics); + if (hub_is_superspeed(hdev)) { + unit_load = 150; + full_load = 900; + } else { + unit_load = 100; + full_load = 500; + } /* FIXME for USB 3.0, skip for now */ if ((wHubCharacteristics & HUB_CHAR_COMPOUND) && @@ -1456,40 +1457,44 @@ static int hub_configure(struct usb_hub *hub, goto fail; } le16_to_cpus(&hubstatus); + hcd = bus_to_hcd(hdev->bus); if (hdev == hdev->bus->root_hub) { - if (hdev->bus_mA == 0 || hdev->bus_mA >= 500) - hub->mA_per_port = 500; + if (hcd->power_budget > 0) + hdev->bus_mA = hcd->power_budget; + else + hdev->bus_mA = full_load * hdev->maxchild; + if (hdev->bus_mA >= full_load) + hub->mA_per_port = full_load; else { hub->mA_per_port = hdev->bus_mA; hub->limited_power = 1; } } else if ((hubstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0) { + int remaining = hdev->bus_mA - + hub->descriptor->bHubContrCurrent; + dev_dbg(hub_dev, "hub controller current requirement: %dmA\n", hub->descriptor->bHubContrCurrent); hub->limited_power = 1; - if (hdev->maxchild > 0) { - int remaining = hdev->bus_mA - - hub->descriptor->bHubContrCurrent; - if (remaining < hdev->maxchild * 100) - dev_warn(hub_dev, + if (remaining < hdev->maxchild * unit_load) + dev_warn(hub_dev, "insufficient power available " "to use all downstream ports\n"); - hub->mA_per_port = 100; /* 7.2.1.1 */ - } + hub->mA_per_port = unit_load; /* 7.2.1 */ + } else { /* Self-powered external hub */ /* FIXME: What about battery-powered external hubs that * provide less current per port? */ - hub->mA_per_port = 500; + hub->mA_per_port = full_load; } - if (hub->mA_per_port < 500) + if (hub->mA_per_port < full_load) dev_dbg(hub_dev, "%umA bus power budget for each child\n", hub->mA_per_port); /* Update the HCD's internal representation of this hub before khubd * starts getting port status changes for devices under the hub. */ - hcd = bus_to_hcd(hdev->bus); if (hcd->driver->update_hub_device) { ret = hcd->driver->update_hub_device(hcd, hdev, &hub->tt, GFP_KERNEL); @@ -1545,6 +1550,8 @@ static int hub_configure(struct usb_hub *hub, dev_err(hub->intfdev, "couldn't create port%d device.\n", i + 1); + usb_hub_adjust_deviceremovable(hdev, hub->descriptor); + hub_activate(hub, HUB_INIT); return 0; @@ -1599,6 +1606,7 @@ static void hub_disconnect(struct usb_interface *intf) kfree(hub->status); kfree(hub->buffer); + pm_suspend_ignore_children(&intf->dev, false); kref_put(&hub->kref, hub_release); } @@ -1612,6 +1620,41 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) desc = intf->cur_altsetting; hdev = interface_to_usbdev(intf); + /* + * Set default autosuspend delay as 0 to speedup bus suspend, + * based on the below considerations: + * + * - Unlike other drivers, the hub driver does not rely on the + * autosuspend delay to provide enough time to handle a wakeup + * event, and the submitted status URB is just to check future + * change on hub downstream ports, so it is safe to do it. + * + * - The patch might cause one or more auto supend/resume for + * below very rare devices when they are plugged into hub + * first time: + * + * devices having trouble initializing, and disconnect + * themselves from the bus and then reconnect a second + * or so later + * + * devices just for downloading firmware, and disconnects + * themselves after completing it + * + * For these quite rare devices, their drivers may change the + * autosuspend delay of their parent hub in the probe() to one + * appropriate value to avoid the subtle problem if someone + * does care it. + * + * - The patch may cause one or more auto suspend/resume on + * hub during running 'lsusb', but it is probably too + * infrequent to worry about. + * + * - Change autosuspend delay of hub can avoid unnecessary auto + * suspend timer for hub, also may decrease power consumption + * of USB bus. + */ + pm_runtime_set_autosuspend_delay(&hdev->dev, 0); + /* Hubs have proper suspend/resume support. */ usb_enable_autosuspend(hdev); @@ -1666,10 +1709,14 @@ descriptor_error: usb_set_intfdata (intf, hub); intf->needs_remote_wakeup = 1; + pm_suspend_ignore_children(&intf->dev, true); if (hdev->speed == USB_SPEED_HIGH) highspeed_hubs++; + if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND) + hub->quirk_check_port_auto_suspend = 1; + if (hub_configure(hub, endpoint) >= 0) return 0; @@ -1681,7 +1728,7 @@ static int hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data) { struct usb_device *hdev = interface_to_usbdev (intf); - struct usb_hub *hub = hdev_to_hub(hdev); + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); /* assert ifno == 0 (part of hub spec) */ switch (code) { @@ -1727,7 +1774,7 @@ static int find_port_owner(struct usb_device *hdev, unsigned port1, /* This assumes that devices not managed by the hub driver * will always have maxchild equal to 0. */ - *ppowner = &(hdev_to_hub(hdev)->ports[port1 - 1]->port_owner); + *ppowner = &(usb_hub_to_struct_hub(hdev)->ports[port1 - 1]->port_owner); return 0; } @@ -1764,7 +1811,7 @@ int usb_hub_release_port(struct usb_device *hdev, unsigned port1, void usb_hub_release_all_ports(struct usb_device *hdev, struct dev_state *owner) { - struct usb_hub *hub = hdev_to_hub(hdev); + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); int n; for (n = 0; n < hdev->maxchild; n++) { @@ -1781,13 +1828,13 @@ bool usb_device_is_owned(struct usb_device *udev) if (udev->state == USB_STATE_NOTATTACHED || !udev->parent) return false; - hub = hdev_to_hub(udev->parent); + hub = usb_hub_to_struct_hub(udev->parent); return !!hub->ports[udev->portnum - 1]->port_owner; } static void recursively_mark_NOTATTACHED(struct usb_device *udev) { - struct usb_hub *hub = hdev_to_hub(udev); + struct usb_hub *hub = usb_hub_to_struct_hub(udev); int i; for (i = 0; i < udev->maxchild; ++i) { @@ -1956,7 +2003,7 @@ static void hub_free_dev(struct usb_device *udev) void usb_disconnect(struct usb_device **pdev) { struct usb_device *udev = *pdev; - struct usb_hub *hub = hdev_to_hub(udev); + struct usb_hub *hub = usb_hub_to_struct_hub(udev); int i; /* mark the device as inactive, so any further urb submissions for @@ -1983,6 +2030,19 @@ void usb_disconnect(struct usb_device **pdev) usb_disable_device(udev, 0); usb_hcd_synchronize_unlinks(udev); + if (udev->parent) { + struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent); + struct usb_port *port_dev = hub->ports[udev->portnum - 1]; + + sysfs_remove_link(&udev->dev.kobj, "port"); + sysfs_remove_link(&port_dev->dev.kobj, "device"); + + if (!port_dev->did_runtime_put) + pm_runtime_put(&port_dev->dev); + else + port_dev->did_runtime_put = false; + } + usb_remove_ep_devs(&udev->ep0); usb_unlock_device(udev); @@ -2012,7 +2072,7 @@ static void show_string(struct usb_device *udev, char *id, char *string) { if (!string) return; - dev_printk(KERN_INFO, &udev->dev, "%s: %s\n", id, string); + dev_info(&udev->dev, "%s: %s\n", id, string); } static void announce_device(struct usb_device *udev) @@ -2169,7 +2229,7 @@ static void set_usb_port_removable(struct usb_device *udev) if (!hdev) return; - hub = hdev_to_hub(udev->parent); + hub = usb_hub_to_struct_hub(udev->parent); wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics); @@ -2275,6 +2335,26 @@ int usb_new_device(struct usb_device *udev) goto fail; } + /* Create link files between child device and usb port device. */ + if (udev->parent) { + struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent); + struct usb_port *port_dev = hub->ports[udev->portnum - 1]; + + err = sysfs_create_link(&udev->dev.kobj, + &port_dev->dev.kobj, "port"); + if (err) + goto fail; + + err = sysfs_create_link(&port_dev->dev.kobj, + &udev->dev.kobj, "device"); + if (err) { + sysfs_remove_link(&udev->dev.kobj, "port"); + goto fail; + } + + pm_runtime_get_sync(&port_dev->dev); + } + (void) usb_create_ep_devs(&udev->dev, &udev->ep0, udev); usb_mark_last_busy(udev); pm_runtime_put_sync_autosuspend(&udev->dev); @@ -2401,7 +2481,7 @@ static unsigned hub_is_wusb(struct usb_hub *hub) #define HUB_SHORT_RESET_TIME 10 #define HUB_BH_RESET_TIME 50 #define HUB_LONG_RESET_TIME 200 -#define HUB_RESET_TIMEOUT 500 +#define HUB_RESET_TIMEOUT 800 static int hub_port_reset(struct usb_hub *hub, int port1, struct usb_device *udev, unsigned int delay, bool warm); @@ -2436,72 +2516,9 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, if (ret < 0) return ret; - /* - * Some buggy devices require a warm reset to be issued even - * when the port appears not to be connected. - */ - if (!warm) { - /* - * Some buggy devices can cause an NEC host controller - * to transition to the "Error" state after a hot port - * reset. This will show up as the port state in - * "Inactive", and the port may also report a - * disconnect. Forcing a warm port reset seems to make - * the device work. - * - * See https://bugzilla.kernel.org/show_bug.cgi?id=41752 - */ - if (hub_port_warm_reset_required(hub, portstatus)) { - int ret; - - if ((portchange & USB_PORT_STAT_C_CONNECTION)) - clear_port_feature(hub->hdev, port1, - USB_PORT_FEAT_C_CONNECTION); - if (portchange & USB_PORT_STAT_C_LINK_STATE) - clear_port_feature(hub->hdev, port1, - USB_PORT_FEAT_C_PORT_LINK_STATE); - if (portchange & USB_PORT_STAT_C_RESET) - clear_port_feature(hub->hdev, port1, - USB_PORT_FEAT_C_RESET); - dev_dbg(hub->intfdev, "hot reset failed, warm reset port %d\n", - port1); - ret = hub_port_reset(hub, port1, - udev, HUB_BH_RESET_TIME, - true); - if ((portchange & USB_PORT_STAT_C_CONNECTION)) - clear_port_feature(hub->hdev, port1, - USB_PORT_FEAT_C_CONNECTION); - return ret; - } - /* Device went away? */ - if (!(portstatus & USB_PORT_STAT_CONNECTION)) - return -ENOTCONN; - - /* bomb out completely if the connection bounced */ - if ((portchange & USB_PORT_STAT_C_CONNECTION)) - return -ENOTCONN; - - /* if we`ve finished resetting, then break out of - * the loop - */ - if (!(portstatus & USB_PORT_STAT_RESET) && - (portstatus & USB_PORT_STAT_ENABLE)) { - if (hub_is_wusb(hub)) - udev->speed = USB_SPEED_WIRELESS; - else if (hub_is_superspeed(hub->hdev)) - udev->speed = USB_SPEED_SUPER; - else if (portstatus & USB_PORT_STAT_HIGH_SPEED) - udev->speed = USB_SPEED_HIGH; - else if (portstatus & USB_PORT_STAT_LOW_SPEED) - udev->speed = USB_SPEED_LOW; - else - udev->speed = USB_SPEED_FULL; - return 0; - } - } else { - if (portchange & USB_PORT_STAT_C_BH_RESET) - return 0; - } + /* The port state is unknown until the reset completes. */ + if (!(portstatus & USB_PORT_STAT_RESET)) + break; /* switch to the long delay after two short delay failures */ if (delay_time >= 2 * HUB_SHORT_RESET_TIME) @@ -2512,45 +2529,77 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, port1, warm ? "warm " : "", delay); } - return -EBUSY; + if ((portstatus & USB_PORT_STAT_RESET)) + return -EBUSY; + + if (hub_port_warm_reset_required(hub, portstatus)) + return -ENOTCONN; + + /* Device went away? */ + if (!(portstatus & USB_PORT_STAT_CONNECTION)) + return -ENOTCONN; + + /* bomb out completely if the connection bounced. A USB 3.0 + * connection may bounce if multiple warm resets were issued, + * but the device may have successfully re-connected. Ignore it. + */ + if (!hub_is_superspeed(hub->hdev) && + (portchange & USB_PORT_STAT_C_CONNECTION)) + return -ENOTCONN; + + if (!(portstatus & USB_PORT_STAT_ENABLE)) + return -EBUSY; + + if (!udev) + return 0; + + if (hub_is_wusb(hub)) + udev->speed = USB_SPEED_WIRELESS; + else if (hub_is_superspeed(hub->hdev)) + udev->speed = USB_SPEED_SUPER; + else if (portstatus & USB_PORT_STAT_HIGH_SPEED) + udev->speed = USB_SPEED_HIGH; + else if (portstatus & USB_PORT_STAT_LOW_SPEED) + udev->speed = USB_SPEED_LOW; + else + udev->speed = USB_SPEED_FULL; + return 0; } static void hub_port_finish_reset(struct usb_hub *hub, int port1, - struct usb_device *udev, int *status, bool warm) + struct usb_device *udev, int *status) { switch (*status) { case 0: - if (!warm) { - struct usb_hcd *hcd; - /* TRSTRCY = 10 ms; plus some extra */ - msleep(10 + 40); + /* TRSTRCY = 10 ms; plus some extra */ + msleep(10 + 40); + if (udev) { + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + update_devnum(udev, 0); - hcd = bus_to_hcd(udev->bus); - if (hcd->driver->reset_device) { - *status = hcd->driver->reset_device(hcd, udev); - if (*status < 0) { - dev_err(&udev->dev, "Cannot reset " - "HCD device state\n"); - break; - } - } + /* The xHC may think the device is already reset, + * so ignore the status. + */ + if (hcd->driver->reset_device) + hcd->driver->reset_device(hcd, udev); } /* FALL THROUGH */ case -ENOTCONN: case -ENODEV: - clear_port_feature(hub->hdev, + usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_RESET); - /* FIXME need disconnect() for NOTATTACHED device */ - if (warm) { - clear_port_feature(hub->hdev, port1, + if (hub_is_superspeed(hub->hdev)) { + usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_BH_PORT_RESET); - clear_port_feature(hub->hdev, port1, + usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_PORT_LINK_STATE); - } else { + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_CONNECTION); + } + if (udev) usb_set_device_state(udev, *status ? USB_STATE_NOTATTACHED : USB_STATE_DEFAULT); - } break; } } @@ -2560,18 +2609,30 @@ static int hub_port_reset(struct usb_hub *hub, int port1, struct usb_device *udev, unsigned int delay, bool warm) { int i, status; + u16 portchange, portstatus; - if (!warm) { - /* Block EHCI CF initialization during the port reset. - * Some companion controllers don't like it when they mix. - */ - down_read(&ehci_cf_port_reset_rwsem); - } else { - if (!hub_is_superspeed(hub->hdev)) { + if (!hub_is_superspeed(hub->hdev)) { + if (warm) { dev_err(hub->intfdev, "only USB3 hub support " "warm reset\n"); return -EINVAL; } + /* Block EHCI CF initialization during the port reset. + * Some companion controllers don't like it when they mix. + */ + down_read(&ehci_cf_port_reset_rwsem); + } else if (!warm) { + /* + * If the caller hasn't explicitly requested a warm reset, + * double check and see if one is needed. + */ + status = hub_port_status(hub, port1, + &portstatus, &portchange); + if (status < 0) + goto done; + + if (hub_port_warm_reset_required(hub, portstatus)) + warm = true; } /* Reset the port */ @@ -2592,10 +2653,33 @@ static int hub_port_reset(struct usb_hub *hub, int port1, status); } - /* return on disconnect or reset */ + /* Check for disconnect or reset */ if (status == 0 || status == -ENOTCONN || status == -ENODEV) { - hub_port_finish_reset(hub, port1, udev, &status, warm); - goto done; + hub_port_finish_reset(hub, port1, udev, &status); + + if (!hub_is_superspeed(hub->hdev)) + goto done; + + /* + * If a USB 3.0 device migrates from reset to an error + * state, re-issue the warm reset. + */ + if (hub_port_status(hub, port1, + &portstatus, &portchange) < 0) + goto done; + + if (!hub_port_warm_reset_required(hub, portstatus)) + goto done; + + /* + * If the port is in SS.Inactive or Compliance Mode, the + * hot or warm reset failed. Try another warm reset. + */ + if (!warm) { + dev_dbg(hub->intfdev, "hot reset failed, warm reset port %d\n", + port1); + warm = true; + } } dev_dbg (hub->intfdev, @@ -2609,7 +2693,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1, port1); done: - if (!warm) + if (!hub_is_superspeed(hub->hdev)) up_read(&ehci_cf_port_reset_rwsem); return status; @@ -2683,10 +2767,10 @@ static int check_port_resume_type(struct usb_device *udev, /* Late port handoff can set status-change bits */ if (portchange & USB_PORT_STAT_C_CONNECTION) - clear_port_feature(hub->hdev, port1, + usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_CONNECTION); if (portchange & USB_PORT_STAT_C_ENABLE) - clear_port_feature(hub->hdev, port1, + usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_ENABLE); } @@ -2738,6 +2822,23 @@ void usb_enable_ltm(struct usb_device *udev) EXPORT_SYMBOL_GPL(usb_enable_ltm); #ifdef CONFIG_USB_SUSPEND +/* + * usb_disable_function_remotewakeup - disable usb3.0 + * device's function remote wakeup + * @udev: target device + * + * Assume there's only one function on the USB 3.0 + * device and disable remote wake for the first + * interface. FIXME if the interface association + * descriptor shows there's more than one function. + */ +static int usb_disable_function_remotewakeup(struct usb_device *udev) +{ + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_REQ_CLEAR_FEATURE, USB_RECIP_INTERFACE, + USB_INTRF_FUNC_SUSPEND, 0, NULL, 0, + USB_CTRL_SET_TIMEOUT); +} /* * usb_port_suspend - suspend a usb device's upstream port @@ -2787,7 +2888,9 @@ EXPORT_SYMBOL_GPL(usb_enable_ltm); */ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) { - struct usb_hub *hub = hdev_to_hub(udev->parent); + struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent); + struct usb_port *port_dev = hub->ports[udev->portnum - 1]; + enum pm_qos_flags_status pm_qos_stat; int port1 = udev->portnum; int status; @@ -2845,9 +2948,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) /* see 7.1.7.6 */ if (hub_is_superspeed(hub->hdev)) - status = set_port_feature(hub->hdev, - port1 | (USB_SS_PORT_LS_U3 << 3), - USB_PORT_FEAT_LINK_STATE); + status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U3); else status = set_port_feature(hub->hdev, port1, USB_PORT_FEAT_SUSPEND); @@ -2855,12 +2956,19 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) dev_dbg(hub->intfdev, "can't suspend port %d, status %d\n", port1, status); /* paranoia: "should not happen" */ - if (udev->do_remote_wakeup) - (void) usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE, - USB_DEVICE_REMOTE_WAKEUP, 0, - NULL, 0, - USB_CTRL_SET_TIMEOUT); + if (udev->do_remote_wakeup) { + if (!hub_is_superspeed(hub->hdev)) { + (void) usb_control_msg(udev, + usb_sndctrlpipe(udev, 0), + USB_REQ_CLEAR_FEATURE, + USB_RECIP_DEVICE, + USB_DEVICE_REMOTE_WAKEUP, 0, + NULL, 0, + USB_CTRL_SET_TIMEOUT); + } else + (void) usb_disable_function_remotewakeup(udev); + + } /* Try to enable USB2 hardware LPM again */ if (udev->usb2_hw_lpm_capable == 1) @@ -2879,8 +2987,24 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) (PMSG_IS_AUTO(msg) ? "auto-" : ""), udev->do_remote_wakeup); usb_set_device_state(udev, USB_STATE_SUSPENDED); + udev->port_is_suspended = 1; msleep(10); } + + /* + * Check whether current status meets the requirement of + * usb port power off mechanism + */ + pm_qos_stat = dev_pm_qos_flags(&port_dev->dev, + PM_QOS_FLAG_NO_POWER_OFF); + if (!udev->do_remote_wakeup + && pm_qos_stat != PM_QOS_FLAGS_ALL + && udev->persist_enabled + && !status) { + pm_runtime_put_sync(&port_dev->dev); + port_dev->did_runtime_put = true; + } + usb_mark_last_busy(hub->hdev); return status; } @@ -2899,7 +3023,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) static int finish_port_resume(struct usb_device *udev) { int status = 0; - u16 devstatus; + u16 devstatus = 0; /* caller owns the udev device lock */ dev_dbg(&udev->dev, "%s\n", @@ -2944,21 +3068,37 @@ static int finish_port_resume(struct usb_device *udev) if (status) { dev_dbg(&udev->dev, "gone after usb resume? status %d\n", status); - } else if (udev->actconfig) { - le16_to_cpus(&devstatus); - if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) { - status = usb_control_msg(udev, - usb_sndctrlpipe(udev, 0), - USB_REQ_CLEAR_FEATURE, + /* + * There are a few quirky devices which violate the standard + * by claiming to have remote wakeup enabled after a reset, + * which crash if the feature is cleared, hence check for + * udev->reset_resume + */ + } else if (udev->actconfig && !udev->reset_resume) { + if (!hub_is_superspeed(udev->parent)) { + le16_to_cpus(&devstatus); + if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) + status = usb_control_msg(udev, + usb_sndctrlpipe(udev, 0), + USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE, - USB_DEVICE_REMOTE_WAKEUP, 0, - NULL, 0, - USB_CTRL_SET_TIMEOUT); - if (status) - dev_dbg(&udev->dev, - "disable remote wakeup, status %d\n", - status); + USB_DEVICE_REMOTE_WAKEUP, 0, + NULL, 0, + USB_CTRL_SET_TIMEOUT); + } else { + status = usb_get_status(udev, USB_RECIP_INTERFACE, 0, + &devstatus); + le16_to_cpus(&devstatus); + if (!status && devstatus & (USB_INTRF_STAT_FUNC_RW_CAP + | USB_INTRF_STAT_FUNC_RW)) + status = + usb_disable_function_remotewakeup(udev); } + + if (status) + dev_dbg(&udev->dev, + "disable remote wakeup, status %d\n", + status); status = 0; } return status; @@ -3000,11 +3140,22 @@ static int finish_port_resume(struct usb_device *udev) */ int usb_port_resume(struct usb_device *udev, pm_message_t msg) { - struct usb_hub *hub = hdev_to_hub(udev->parent); + struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent); + struct usb_port *port_dev = hub->ports[udev->portnum - 1]; int port1 = udev->portnum; int status; u16 portchange, portstatus; + if (port_dev->did_runtime_put) { + status = pm_runtime_get_sync(&port_dev->dev); + port_dev->did_runtime_put = false; + if (status < 0) { + dev_dbg(&udev->dev, "can't resume usb port, status %d\n", + status); + return status; + } + } + /* Skip the initial Clear-Suspend step for a remote wakeup */ status = hub_port_status(hub, port1, &portstatus, &portchange); if (status == 0 && !port_is_suspended(hub, portstatus)) @@ -3016,11 +3167,9 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) /* see 7.1.7.7; affects power usage, but not budgeting */ if (hub_is_superspeed(hub->hdev)) - status = set_port_feature(hub->hdev, - port1 | (USB_SS_PORT_LS_U0 << 3), - USB_PORT_FEAT_LINK_STATE); + status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U0); else - status = clear_port_feature(hub->hdev, + status = usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_SUSPEND); if (status) { dev_dbg(hub->intfdev, "can't resume port %d, status %d\n", @@ -3043,13 +3192,14 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) SuspendCleared: if (status == 0) { + udev->port_is_suspended = 0; if (hub_is_superspeed(hub->hdev)) { if (portchange & USB_PORT_STAT_C_LINK_STATE) - clear_port_feature(hub->hdev, port1, + usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_PORT_LINK_STATE); } else { if (portchange & USB_PORT_STAT_C_SUSPEND) - clear_port_feature(hub->hdev, port1, + usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_SUSPEND); } } @@ -3105,7 +3255,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) int usb_port_resume(struct usb_device *udev, pm_message_t msg) { - struct usb_hub *hub = hdev_to_hub(udev->parent); + struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent); int port1 = udev->portnum; int status; u16 portchange, portstatus; @@ -3126,6 +3276,21 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) #endif +static int check_ports_changed(struct usb_hub *hub) +{ + int port1; + + for (port1 = 1; port1 <= hub->hdev->maxchild; ++port1) { + u16 portstatus, portchange; + int status; + + status = hub_port_status(hub, port1, &portstatus, &portchange); + if (!status && portchange) + return 1; + } + return 0; +} + static int hub_suspend(struct usb_interface *intf, pm_message_t msg) { struct usb_hub *hub = usb_get_intfdata (intf); @@ -3144,6 +3309,16 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) return -EBUSY; } } + + if (hdev->do_remote_wakeup && hub->quirk_check_port_auto_suspend) { + /* check if there are changes pending on hub ports */ + if (check_ports_changed(hub)) { + if (PMSG_IS_AUTO(msg)) + return -EBUSY; + pm_wakeup_event(&hdev->dev, 2000); + } + } + if (hub_is_superspeed(hdev) && hdev->do_remote_wakeup) { /* Enable hub to send remote wakeup for all ports. */ for (port1 = 1; port1 <= hdev->maxchild; port1++) { @@ -3659,7 +3834,7 @@ EXPORT_SYMBOL_GPL(usb_enable_ltm); * every 25ms for transient disconnects. When the port status has been * unchanged for 100ms it returns the port status. */ -static int hub_port_debounce(struct usb_hub *hub, int port1) +int hub_port_debounce(struct usb_hub *hub, int port1, bool must_be_connected) { int ret; int total_time, stable_time = 0; @@ -3673,7 +3848,9 @@ static int hub_port_debounce(struct usb_hub *hub, int port1) if (!(portchange & USB_PORT_STAT_C_CONNECTION) && (portstatus & USB_PORT_STAT_CONNECTION) == connection) { - stable_time += HUB_DEBOUNCE_STEP; + if (!must_be_connected || + (connection == USB_PORT_STAT_CONNECTION)) + stable_time += HUB_DEBOUNCE_STEP; if (stable_time >= HUB_DEBOUNCE_STABLE) break; } else { @@ -3682,7 +3859,7 @@ static int hub_port_debounce(struct usb_hub *hub, int port1) } if (portchange & USB_PORT_STAT_C_CONNECTION) { - clear_port_feature(hub->hdev, port1, + usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_CONNECTION); } @@ -3972,6 +4149,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, if (retval) goto fail; + if (hcd->phy && !hdev->parent) + usb_phy_notify_connect(hcd->phy, udev->speed); + /* * Some superspeed devices have finished the link training process * and attached to a superspeed hub port, but the device descriptor @@ -4076,16 +4256,23 @@ hub_power_remaining (struct usb_hub *hub) for (port1 = 1; port1 <= hdev->maxchild; ++port1) { struct usb_device *udev = hub->ports[port1 - 1]->child; int delta; + unsigned unit_load; if (!udev) continue; + if (hub_is_superspeed(udev)) + unit_load = 150; + else + unit_load = 100; - /* Unconfigured devices may not use more than 100mA, - * or 8mA for OTG ports */ + /* + * Unconfigured devices may not use more than one unit load, + * or 8mA for OTG ports + */ if (udev->actconfig) - delta = udev->actconfig->desc.bMaxPower * 2; + delta = usb_get_max_power(udev, udev->actconfig); else if (port1 != udev->bus->otg_port || hdev->parent) - delta = 100; + delta = unit_load; else delta = 8; if (delta > hub->mA_per_port) @@ -4120,6 +4307,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, le16_to_cpu(hub->descriptor->wHubCharacteristics); struct usb_device *udev; int status, i; + unsigned unit_load; dev_dbg (hub_dev, "port %d, status %04x, change %04x, %s\n", @@ -4166,8 +4354,12 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, } /* Disconnect any existing devices under this port */ - if (udev) + if (udev) { + if (hcd->phy && !hdev->parent && + !(portstatus & USB_PORT_STAT_CONNECTION)) + usb_phy_notify_disconnect(hcd->phy, udev->speed); usb_disconnect(&hub->ports[port1 - 1]->child); + } clear_bit(port1, hub->change_bits); /* We can forget about a "removed" device when there's a physical @@ -4179,7 +4371,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, if (portchange & (USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE)) { - status = hub_port_debounce(hub, port1); + status = hub_port_debounce_be_stable(hub, port1); if (status < 0) { if (printk_ratelimit()) dev_err(hub_dev, "connect-debounce failed, " @@ -4190,13 +4382,6 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, } } - if (hcd->phy && !hdev->parent) { - if (portstatus & USB_PORT_STAT_CONNECTION) - usb_phy_notify_connect(hcd->phy, port1); - else - usb_phy_notify_disconnect(hcd->phy, port1); - } - /* Return now if debouncing failed or nothing is connected or * the device was "removed". */ @@ -4212,6 +4397,10 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, goto done; return; } + if (hub_is_superspeed(hub->hdev)) + unit_load = 150; + else + unit_load = 100; for (i = 0; i < SET_CONFIG_TRIES; i++) { @@ -4259,7 +4448,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, * on the parent. */ if (udev->descriptor.bDeviceClass == USB_CLASS_HUB - && udev->bus_mA <= 100) { + && udev->bus_mA <= unit_load) { u16 devstat; status = usb_get_status(udev, USB_RECIP_DEVICE, 0, @@ -4361,7 +4550,7 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, if (!hub_is_superspeed(hdev)) { if (!(portchange & USB_PORT_STAT_C_SUSPEND)) return 0; - clear_port_feature(hdev, port, USB_PORT_FEAT_C_SUSPEND); + usb_clear_port_feature(hdev, port, USB_PORT_FEAT_C_SUSPEND); } else { if (!udev || udev->state != USB_STATE_SUSPENDED || (portstatus & USB_PORT_STAT_LINK_STATE) != @@ -4489,7 +4678,7 @@ static void hub_events(void) continue; if (portchange & USB_PORT_STAT_C_CONNECTION) { - clear_port_feature(hdev, i, + usb_clear_port_feature(hdev, i, USB_PORT_FEAT_C_CONNECTION); connect_change = 1; } @@ -4500,7 +4689,7 @@ static void hub_events(void) "port %d enable change, " "status %08x\n", i, portstatus); - clear_port_feature(hdev, i, + usb_clear_port_feature(hdev, i, USB_PORT_FEAT_C_ENABLE); /* @@ -4531,7 +4720,7 @@ static void hub_events(void) dev_dbg(hub_dev, "over-current change on port " "%d\n", i); - clear_port_feature(hdev, i, + usb_clear_port_feature(hdev, i, USB_PORT_FEAT_C_OVER_CURRENT); msleep(100); /* Cool down */ hub_power_on(hub, true); @@ -4545,7 +4734,7 @@ static void hub_events(void) dev_dbg (hub_dev, "reset change on port %d\n", i); - clear_port_feature(hdev, i, + usb_clear_port_feature(hdev, i, USB_PORT_FEAT_C_RESET); } if ((portchange & USB_PORT_STAT_C_BH_RESET) && @@ -4553,18 +4742,18 @@ static void hub_events(void) dev_dbg(hub_dev, "warm reset change on port %d\n", i); - clear_port_feature(hdev, i, + usb_clear_port_feature(hdev, i, USB_PORT_FEAT_C_BH_PORT_RESET); } if (portchange & USB_PORT_STAT_C_LINK_STATE) { - clear_port_feature(hub->hdev, i, + usb_clear_port_feature(hub->hdev, i, USB_PORT_FEAT_C_PORT_LINK_STATE); } if (portchange & USB_PORT_STAT_C_CONFIG_ERROR) { dev_warn(hub_dev, "config error on port %d\n", i); - clear_port_feature(hub->hdev, i, + usb_clear_port_feature(hub->hdev, i, USB_PORT_FEAT_C_PORT_CONFIG_ERROR); } @@ -4572,9 +4761,23 @@ static void hub_events(void) * SS.Inactive state. */ if (hub_port_warm_reset_required(hub, portstatus)) { + int status; + struct usb_device *udev = + hub->ports[i - 1]->child; + dev_dbg(hub_dev, "warm reset port %d\n", i); - hub_port_reset(hub, i, NULL, - HUB_BH_RESET_TIME, true); + if (!udev) { + status = hub_port_reset(hub, i, + NULL, HUB_BH_RESET_TIME, + true); + if (status < 0) + hub_port_disable(hub, i, 1); + } else { + usb_lock_device(udev); + status = usb_reset_device(udev); + usb_unlock_device(udev); + } + connect_change = 0; } if (connect_change) @@ -4648,6 +4851,11 @@ static int hub_thread(void *__unused) } static const struct usb_device_id hub_id_table[] = { + { .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_INT_CLASS, + .idVendor = USB_VENDOR_GENESYS_LOGIC, + .bInterfaceClass = USB_CLASS_HUB, + .driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND}, { .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS, .bDeviceClass = USB_CLASS_HUB}, { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS, @@ -4829,7 +5037,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev) dev_dbg(&udev->dev, "%s for root hub!\n", __func__); return -EISDIR; } - parent_hub = hdev_to_hub(parent_hdev); + parent_hub = usb_hub_to_struct_hub(parent_hdev); /* Disable LPM and LTM while we reset the device and reinstall the alt * settings. Device-initiated LPM settings, and system exit latency @@ -4969,6 +5177,7 @@ int usb_reset_device(struct usb_device *udev) { int ret; int i; + unsigned int noio_flag; struct usb_host_config *config = udev->actconfig; if (udev->state == USB_STATE_NOTATTACHED || @@ -4978,6 +5187,17 @@ int usb_reset_device(struct usb_device *udev) return -EINVAL; } + /* + * Don't allocate memory with GFP_KERNEL in current + * context to avoid possible deadlock if usb mass + * storage interface or usbnet interface(iSCSI case) + * is included in current configuration. The easist + * approach is to do it for every device reset, + * because the device 'memalloc_noio' flag may have + * not been set before reseting the usb device. + */ + noio_flag = memalloc_noio_save(); + /* Prevent autosuspend during the reset */ usb_autoresume_device(udev); @@ -5022,6 +5242,7 @@ int usb_reset_device(struct usb_device *udev) } usb_autosuspend_device(udev); + memalloc_noio_restore(noio_flag); return ret; } EXPORT_SYMBOL_GPL(usb_reset_device); @@ -5085,7 +5306,7 @@ EXPORT_SYMBOL_GPL(usb_queue_reset_device); struct usb_device *usb_hub_find_child(struct usb_device *hdev, int port1) { - struct usb_hub *hub = hdev_to_hub(hdev); + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); if (port1 < 1 || port1 > hdev->maxchild) return NULL; @@ -5102,7 +5323,7 @@ EXPORT_SYMBOL_GPL(usb_hub_find_child); void usb_set_hub_port_connect_type(struct usb_device *hdev, int port1, enum usb_port_connect_type type) { - struct usb_hub *hub = hdev_to_hub(hdev); + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); hub->ports[port1 - 1]->connect_type = type; } @@ -5118,11 +5339,52 @@ void usb_set_hub_port_connect_type(struct usb_device *hdev, int port1, enum usb_port_connect_type usb_get_hub_port_connect_type(struct usb_device *hdev, int port1) { - struct usb_hub *hub = hdev_to_hub(hdev); + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); return hub->ports[port1 - 1]->connect_type; } +void usb_hub_adjust_deviceremovable(struct usb_device *hdev, + struct usb_hub_descriptor *desc) +{ + enum usb_port_connect_type connect_type; + int i; + + if (!hub_is_superspeed(hdev)) { + for (i = 1; i <= hdev->maxchild; i++) { + connect_type = usb_get_hub_port_connect_type(hdev, i); + + if (connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) { + u8 mask = 1 << (i%8); + + if (!(desc->u.hs.DeviceRemovable[i/8] & mask)) { + dev_dbg(&hdev->dev, "usb port%d's DeviceRemovable is changed to 1 according to platform information.\n", + i); + desc->u.hs.DeviceRemovable[i/8] |= mask; + } + } + } + } else { + u16 port_removable = le16_to_cpu(desc->u.ss.DeviceRemovable); + + for (i = 1; i <= hdev->maxchild; i++) { + connect_type = usb_get_hub_port_connect_type(hdev, i); + + if (connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) { + u16 mask = 1 << i; + + if (!(port_removable & mask)) { + dev_dbg(&hdev->dev, "usb port%d's DeviceRemovable is changed to 1 according to platform information.\n", + i); + port_removable |= mask; + } + } + } + + desc->u.ss.DeviceRemovable = cpu_to_le16(port_removable); + } +} + #ifdef CONFIG_ACPI /** * usb_get_hub_port_acpi_handle - Get the usb port's acpi handle @@ -5135,7 +5397,7 @@ usb_get_hub_port_connect_type(struct usb_device *hdev, int port1) acpi_handle usb_get_hub_port_acpi_handle(struct usb_device *hdev, int port1) { - struct usb_hub *hub = hdev_to_hub(hdev); + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); return DEVICE_ACPI_HANDLE(&hub->ports[port1 - 1]->dev); } diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h new file mode 100644 index 00000000000..80ab9ee0701 --- /dev/null +++ b/drivers/usb/core/hub.h @@ -0,0 +1,122 @@ +/* + * usb hub driver head file + * + * Copyright (C) 1999 Linus Torvalds + * Copyright (C) 1999 Johannes Erdfelt + * Copyright (C) 1999 Gregory P. Smith + * Copyright (C) 2001 Brad Hards (bhards@bigpond.net.au) + * Copyright (C) 2012 Intel Corp (tianyu.lan@intel.com) + * + * move struct usb_hub to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include <linux/usb.h> +#include <linux/usb/ch11.h> +#include <linux/usb/hcd.h> +#include "usb.h" + +struct usb_hub { + struct device *intfdev; /* the "interface" device */ + struct usb_device *hdev; + struct kref kref; + struct urb *urb; /* for interrupt polling pipe */ + + /* buffer for urb ... with extra space in case of babble */ + u8 (*buffer)[8]; + union { + struct usb_hub_status hub; + struct usb_port_status port; + } *status; /* buffer for status reports */ + struct mutex status_mutex; /* for the status buffer */ + + int error; /* last reported error */ + int nerrors; /* track consecutive errors */ + + struct list_head event_list; /* hubs w/data or errs ready */ + unsigned long event_bits[1]; /* status change bitmask */ + unsigned long change_bits[1]; /* ports with logical connect + status change */ + unsigned long busy_bits[1]; /* ports being reset or + resumed */ + unsigned long removed_bits[1]; /* ports with a "removed" + device present */ + unsigned long wakeup_bits[1]; /* ports that have signaled + remote wakeup */ +#if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */ +#error event_bits[] is too short! +#endif + + struct usb_hub_descriptor *descriptor; /* class descriptor */ + struct usb_tt tt; /* Transaction Translator */ + + unsigned mA_per_port; /* current for each child */ + + unsigned limited_power:1; + unsigned quiescing:1; + unsigned disconnected:1; + + unsigned quirk_check_port_auto_suspend:1; + + unsigned has_indicators:1; + u8 indicator[USB_MAXCHILDREN]; + struct delayed_work leds; + struct delayed_work init_work; + struct usb_port **ports; +}; + +/** + * struct usb port - kernel's representation of a usb port + * @child: usb device attatched to the port + * @dev: generic device interface + * @port_owner: port's owner + * @connect_type: port's connect type + * @portnum: port index num based one + * @power_is_on: port's power state + * @did_runtime_put: port has done pm_runtime_put(). + */ +struct usb_port { + struct usb_device *child; + struct device dev; + struct dev_state *port_owner; + enum usb_port_connect_type connect_type; + u8 portnum; + unsigned power_is_on:1; + unsigned did_runtime_put:1; +}; + +#define to_usb_port(_dev) \ + container_of(_dev, struct usb_port, dev) + +extern int usb_hub_create_port_device(struct usb_hub *hub, + int port1); +extern void usb_hub_remove_port_device(struct usb_hub *hub, + int port1); +extern int usb_hub_set_port_power(struct usb_device *hdev, + int port1, bool set); +extern struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev); +extern int hub_port_debounce(struct usb_hub *hub, int port1, + bool must_be_connected); +extern int usb_clear_port_feature(struct usb_device *hdev, + int port1, int feature); + +static inline int hub_port_debounce_be_connected(struct usb_hub *hub, + int port1) +{ + return hub_port_debounce(hub, port1, true); +} + +static inline int hub_port_debounce_be_stable(struct usb_hub *hub, + int port1) +{ + return hub_port_debounce(hub, port1, false); +} + diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 1ed5afd91e6..444d30e3a78 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1540,7 +1540,6 @@ static void usb_release_interface(struct device *dev) kfree(intf); } -#ifdef CONFIG_HOTPLUG static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env) { struct usb_device *usb_dev; @@ -1575,14 +1574,6 @@ static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env) return 0; } -#else - -static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env) -{ - return -ENODEV; -} -#endif /* CONFIG_HOTPLUG */ - struct device_type usb_if_device_type = { .name = "usb_interface", .release = usb_release_interface, @@ -1760,7 +1751,7 @@ free_interfaces: } } - i = dev->bus_mA - cp->desc.bMaxPower * 2; + i = dev->bus_mA - usb_get_max_power(dev, cp); if (i < 0) dev_warn(&dev->dev, "new config #%d exceeds power " "limit by %dmA\n", @@ -1795,7 +1786,8 @@ free_interfaces: if (dev->actconfig && usb_disable_lpm(dev)) { dev_err(&dev->dev, "%s Failed to disable LPM\n.", __func__); mutex_unlock(hcd->bandwidth_mutex); - return -ENOMEM; + ret = -ENOMEM; + goto free_interfaces; } ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL); if (ret < 0) { @@ -1806,29 +1798,8 @@ free_interfaces: goto free_interfaces; } - ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - USB_REQ_SET_CONFIGURATION, 0, configuration, 0, - NULL, 0, USB_CTRL_SET_TIMEOUT); - if (ret < 0) { - /* All the old state is gone, so what else can we do? - * The device is probably useless now anyway. - */ - cp = NULL; - } - - dev->actconfig = cp; - if (!cp) { - usb_set_device_state(dev, USB_STATE_ADDRESS); - usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL); - /* Leave LPM disabled while the device is unconfigured. */ - mutex_unlock(hcd->bandwidth_mutex); - usb_autosuspend_device(dev); - goto free_interfaces; - } - mutex_unlock(hcd->bandwidth_mutex); - usb_set_device_state(dev, USB_STATE_CONFIGURED); - - /* Initialize the new interface structures and the + /* + * Initialize the new interface structures and the * hc/hcd/usbcore interface/endpoint state. */ for (i = 0; i < nintf; ++i) { @@ -1872,6 +1843,35 @@ free_interfaces: } kfree(new_interfaces); + ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + USB_REQ_SET_CONFIGURATION, 0, configuration, 0, + NULL, 0, USB_CTRL_SET_TIMEOUT); + if (ret < 0 && cp) { + /* + * All the old state is gone, so what else can we do? + * The device is probably useless now anyway. + */ + usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL); + for (i = 0; i < nintf; ++i) { + usb_disable_interface(dev, cp->interface[i], true); + put_device(&cp->interface[i]->dev); + cp->interface[i] = NULL; + } + cp = NULL; + } + + dev->actconfig = cp; + mutex_unlock(hcd->bandwidth_mutex); + + if (!cp) { + usb_set_device_state(dev, USB_STATE_ADDRESS); + + /* Leave LPM disabled while the device is unconfigured. */ + usb_autosuspend_device(dev); + return ret; + } + usb_set_device_state(dev, USB_STATE_CONFIGURED); + if (cp->string == NULL && !(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS)) cp->string = usb_cache_string(dev, cp->desc.iConfiguration); diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c new file mode 100644 index 00000000000..797f9d51473 --- /dev/null +++ b/drivers/usb/core/port.c @@ -0,0 +1,202 @@ +/* + * usb port device code + * + * Copyright (C) 2012 Intel Corp + * + * Author: Lan Tianyu <tianyu.lan@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + */ + +#include <linux/slab.h> +#include <linux/pm_qos.h> + +#include "hub.h" + +static const struct attribute_group *port_dev_group[]; + +static ssize_t show_port_connect_type(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_port *port_dev = to_usb_port(dev); + char *result; + + switch (port_dev->connect_type) { + case USB_PORT_CONNECT_TYPE_HOT_PLUG: + result = "hotplug"; + break; + case USB_PORT_CONNECT_TYPE_HARD_WIRED: + result = "hardwired"; + break; + case USB_PORT_NOT_USED: + result = "not used"; + break; + default: + result = "unknown"; + break; + } + + return sprintf(buf, "%s\n", result); +} +static DEVICE_ATTR(connect_type, S_IRUGO, show_port_connect_type, + NULL); + +static struct attribute *port_dev_attrs[] = { + &dev_attr_connect_type.attr, + NULL, +}; + +static struct attribute_group port_dev_attr_grp = { + .attrs = port_dev_attrs, +}; + +static const struct attribute_group *port_dev_group[] = { + &port_dev_attr_grp, + NULL, +}; + +static void usb_port_device_release(struct device *dev) +{ + struct usb_port *port_dev = to_usb_port(dev); + + dev_pm_qos_hide_flags(dev); + kfree(port_dev); +} + +#ifdef CONFIG_USB_SUSPEND +static int usb_port_runtime_resume(struct device *dev) +{ + struct usb_port *port_dev = to_usb_port(dev); + struct usb_device *hdev = to_usb_device(dev->parent->parent); + struct usb_interface *intf = to_usb_interface(dev->parent); + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); + int port1 = port_dev->portnum; + int retval; + + if (!hub) + return -EINVAL; + + usb_autopm_get_interface(intf); + set_bit(port1, hub->busy_bits); + + retval = usb_hub_set_port_power(hdev, port1, true); + if (port_dev->child && !retval) { + /* + * Wait for usb hub port to be reconnected in order to make + * the resume procedure successful. + */ + retval = hub_port_debounce_be_connected(hub, port1); + if (retval < 0) { + dev_dbg(&port_dev->dev, "can't get reconnection after setting port power on, status %d\n", + retval); + goto out; + } + usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE); + + /* Set return value to 0 if debounce successful */ + retval = 0; + } + +out: + clear_bit(port1, hub->busy_bits); + usb_autopm_put_interface(intf); + return retval; +} + +static int usb_port_runtime_suspend(struct device *dev) +{ + struct usb_port *port_dev = to_usb_port(dev); + struct usb_device *hdev = to_usb_device(dev->parent->parent); + struct usb_interface *intf = to_usb_interface(dev->parent); + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); + int port1 = port_dev->portnum; + int retval; + + if (!hub) + return -EINVAL; + + if (dev_pm_qos_flags(&port_dev->dev, PM_QOS_FLAG_NO_POWER_OFF) + == PM_QOS_FLAGS_ALL) + return -EAGAIN; + + usb_autopm_get_interface(intf); + set_bit(port1, hub->busy_bits); + retval = usb_hub_set_port_power(hdev, port1, false); + usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION); + usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE); + clear_bit(port1, hub->busy_bits); + usb_autopm_put_interface(intf); + return retval; +} +#endif + +static const struct dev_pm_ops usb_port_pm_ops = { +#ifdef CONFIG_USB_SUSPEND + .runtime_suspend = usb_port_runtime_suspend, + .runtime_resume = usb_port_runtime_resume, + .runtime_idle = pm_generic_runtime_idle, +#endif +}; + +struct device_type usb_port_device_type = { + .name = "usb_port", + .release = usb_port_device_release, + .pm = &usb_port_pm_ops, +}; + +int usb_hub_create_port_device(struct usb_hub *hub, int port1) +{ + struct usb_port *port_dev = NULL; + int retval; + + port_dev = kzalloc(sizeof(*port_dev), GFP_KERNEL); + if (!port_dev) { + retval = -ENOMEM; + goto exit; + } + + hub->ports[port1 - 1] = port_dev; + port_dev->portnum = port1; + port_dev->power_is_on = true; + port_dev->dev.parent = hub->intfdev; + port_dev->dev.groups = port_dev_group; + port_dev->dev.type = &usb_port_device_type; + dev_set_name(&port_dev->dev, "port%d", port1); + + retval = device_register(&port_dev->dev); + if (retval) + goto error_register; + + pm_runtime_set_active(&port_dev->dev); + + /* It would be dangerous if user space couldn't + * prevent usb device from being powered off. So don't + * enable port runtime pm if failed to expose port's pm qos. + */ + if (!dev_pm_qos_expose_flags(&port_dev->dev, + PM_QOS_FLAG_NO_POWER_OFF)) + pm_runtime_enable(&port_dev->dev); + + device_enable_async_suspend(&port_dev->dev); + return 0; + +error_register: + put_device(&port_dev->dev); +exit: + return retval; +} + +void usb_hub_remove_port_device(struct usb_hub *hub, + int port1) +{ + device_unregister(&hub->ports[port1 - 1]->dev); +} + diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index fdefd9c7f7a..3113c1d7144 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -43,6 +43,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Creative SB Audigy 2 NX */ { USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Microsoft LifeCam-VX700 v2.0 */ + { USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Quickcam Fusion */ { USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME }, diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 818e4a024d0..3f81a3dc686 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -17,7 +17,7 @@ #include "usb.h" /* Active configuration fields */ -#define usb_actconfig_show(field, multiplier, format_string) \ +#define usb_actconfig_show(field, format_string) \ static ssize_t show_##field(struct device *dev, \ struct device_attribute *attr, char *buf) \ { \ @@ -28,18 +28,31 @@ static ssize_t show_##field(struct device *dev, \ actconfig = udev->actconfig; \ if (actconfig) \ return sprintf(buf, format_string, \ - actconfig->desc.field * multiplier); \ + actconfig->desc.field); \ else \ return 0; \ } \ -#define usb_actconfig_attr(field, multiplier, format_string) \ -usb_actconfig_show(field, multiplier, format_string) \ -static DEVICE_ATTR(field, S_IRUGO, show_##field, NULL); +#define usb_actconfig_attr(field, format_string) \ + usb_actconfig_show(field, format_string) \ + static DEVICE_ATTR(field, S_IRUGO, show_##field, NULL); + +usb_actconfig_attr(bNumInterfaces, "%2d\n") +usb_actconfig_attr(bmAttributes, "%2x\n") -usb_actconfig_attr(bNumInterfaces, 1, "%2d\n") -usb_actconfig_attr(bmAttributes, 1, "%2x\n") -usb_actconfig_attr(bMaxPower, 2, "%3dmA\n") +static ssize_t show_bMaxPower(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_device *udev; + struct usb_host_config *actconfig; + + udev = to_usb_device(dev); + actconfig = udev->actconfig; + if (!actconfig) + return 0; + return sprintf(buf, "%dmA\n", usb_get_max_power(udev, actconfig)); +} +static DEVICE_ATTR(bMaxPower, S_IRUGO, show_bMaxPower, NULL); static ssize_t show_configuration_string(struct device *dev, struct device_attribute *attr, char *buf) @@ -56,7 +69,7 @@ static ssize_t show_configuration_string(struct device *dev, static DEVICE_ATTR(configuration, S_IRUGO, show_configuration_string, NULL); /* configuration value is always present, and r/w */ -usb_actconfig_show(bConfigurationValue, 1, "%u\n"); +usb_actconfig_show(bConfigurationValue, "%u\n"); static ssize_t set_bConfigurationValue(struct device *dev, struct device_attribute *attr, diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 9d912bfdcff..e0d9d948218 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -214,9 +214,25 @@ EXPORT_SYMBOL_GPL(usb_unanchor_urb); * urb->interval is modified to reflect the actual transfer period used * (normally some power of two units). And for isochronous urbs, * urb->start_frame is modified to reflect when the URB's transfers were - * scheduled to start. Not all isochronous transfer scheduling policies - * will work, but most host controller drivers should easily handle ISO - * queues going from now until 10-200 msec into the future. + * scheduled to start. + * + * Not all isochronous transfer scheduling policies will work, but most + * host controller drivers should easily handle ISO queues going from now + * until 10-200 msec into the future. Drivers should try to keep at + * least one or two msec of data in the queue; many controllers require + * that new transfers start at least 1 msec in the future when they are + * added. If the driver is unable to keep up and the queue empties out, + * the behavior for new submissions is governed by the URB_ISO_ASAP flag. + * If the flag is set, or if the queue is idle, then the URB is always + * assigned to the first available (and not yet expired) slot in the + * endpoint's schedule. If the flag is not set and the queue is active + * then the URB is always assigned to the next slot in the schedule + * following the end of the endpoint's previous URB, even if that slot is + * in the past. When a packet is assigned in this way to a slot that has + * already expired, the packet is not transmitted and the corresponding + * usb_iso_packet_descriptor's status field will return -EXDEV. If this + * would happen to all the packets in the URB, submission fails with a + * -EXDEV error code. * * For control endpoints, the synchronous usb_control_msg() call is * often used (in non-interrupt context) instead of this call. @@ -305,8 +321,13 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) struct usb_host_endpoint *ep; int is_out; - if (!urb || urb->hcpriv || !urb->complete) + if (!urb || !urb->complete) return -EINVAL; + if (urb->hcpriv) { + WARN_ONCE(1, "URB %p submitted while active\n", urb); + return -EBUSY; + } + dev = urb->dev; if ((!dev) || (dev->state < USB_STATE_UNAUTHENTICATED)) return -ENODEV; diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c index cef4252bb31..b6f4bad3f75 100644 --- a/drivers/usb/core/usb-acpi.c +++ b/drivers/usb/core/usb-acpi.c @@ -210,9 +210,14 @@ static int usb_acpi_find_device(struct device *dev, acpi_handle *handle) return 0; } +static bool usb_acpi_bus_match(struct device *dev) +{ + return is_usb_device(dev) || is_usb_port(dev); +} + static struct acpi_bus_type usb_acpi_bus = { - .bus = &usb_bus_type, - .find_bridge = usb_acpi_find_device, + .name = "USB", + .match = usb_acpi_bus_match, .find_device = usb_acpi_find_device, }; diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index cd8fb44a3e1..f81b9257273 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -233,7 +233,6 @@ static void usb_release_dev(struct device *dev) kfree(udev); } -#ifdef CONFIG_HOTPLUG static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env) { struct usb_device *usb_dev; @@ -249,14 +248,6 @@ static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env) return 0; } -#else - -static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env) -{ - return -ENODEV; -} -#endif /* CONFIG_HOTPLUG */ - #ifdef CONFIG_PM /* USB device Power-Management thunks. @@ -370,14 +361,14 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1) { struct usb_device *dev; - struct usb_hcd *usb_hcd = container_of(bus, struct usb_hcd, self); + struct usb_hcd *usb_hcd = bus_to_hcd(bus); unsigned root_hub = 0; dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) return NULL; - if (!usb_get_hcd(bus_to_hcd(bus))) { + if (!usb_get_hcd(usb_hcd)) { kfree(dev); return NULL; } diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 1c528c1bf0b..a7f20bde0e5 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -1,6 +1,7 @@ #include <linux/pm.h> #include <linux/acpi.h> +struct usb_hub_descriptor; struct dev_state; /* Functions local to drivers/usb/core/ */ @@ -38,6 +39,15 @@ extern char *usb_cache_string(struct usb_device *udev, int index); extern int usb_set_configuration(struct usb_device *dev, int configuration); extern int usb_choose_configuration(struct usb_device *udev); +static inline unsigned usb_get_max_power(struct usb_device *udev, + struct usb_host_config *c) +{ + /* SuperSpeed power is in 8 mA units; others are in 2 mA units */ + unsigned mul = (udev->speed == USB_SPEED_SUPER ? 8 : 2); + + return c->desc.bMaxPower * mul; +} + extern void usb_kick_khubd(struct usb_device *dev); extern int usb_match_one_id_intf(struct usb_device *dev, struct usb_host_interface *intf, @@ -173,6 +183,8 @@ extern enum usb_port_connect_type usb_get_hub_port_connect_type(struct usb_device *hdev, int port1); extern void usb_set_hub_port_connect_type(struct usb_device *hdev, int port1, enum usb_port_connect_type type); +extern void usb_hub_adjust_deviceremovable(struct usb_device *hdev, + struct usb_hub_descriptor *desc); #ifdef CONFIG_ACPI extern int usb_acpi_register(void); diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index f6a6e070c2a..68e9a2c5a01 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -1,6 +1,6 @@ config USB_DWC3 tristate "DesignWare USB3 DRD Core Support" - depends on (USB && USB_GADGET) + depends on (USB || USB_GADGET) && GENERIC_HARDIRQS select USB_OTG_UTILS select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD help @@ -12,6 +12,35 @@ config USB_DWC3 if USB_DWC3 +choice + bool "DWC3 Mode Selection" + default USB_DWC3_DUAL_ROLE if (USB && USB_GADGET) + default USB_DWC3_HOST if (USB && !USB_GADGET) + default USB_DWC3_GADGET if (!USB && USB_GADGET) + +config USB_DWC3_HOST + bool "Host only mode" + depends on USB + help + Select this when you want to use DWC3 in host mode only, + thereby the gadget feature will be regressed. + +config USB_DWC3_GADGET + bool "Gadget only mode" + depends on USB_GADGET + help + Select this when you want to use DWC3 in gadget mode only, + thereby the host feature will be regressed. + +config USB_DWC3_DUAL_ROLE + bool "Dual Role mode" + depends on (USB && USB_GADGET) + help + This is the default mode of working of DWC3 controller where + both host and gadget features are enabled. + +endchoice + config USB_DWC3_DEBUG bool "Enable Debugging Messages" help diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile index d441fe4c180..0c7ac92582b 100644 --- a/drivers/usb/dwc3/Makefile +++ b/drivers/usb/dwc3/Makefile @@ -4,8 +4,14 @@ ccflags-$(CONFIG_USB_DWC3_VERBOSE) += -DVERBOSE_DEBUG obj-$(CONFIG_USB_DWC3) += dwc3.o dwc3-y := core.o -dwc3-y += host.o -dwc3-y += gadget.o ep0.o + +ifneq ($(filter y,$(CONFIG_USB_DWC3_HOST) $(CONFIG_USB_DWC3_DUAL_ROLE)),) + dwc3-y += host.o +endif + +ifneq ($(filter y,$(CONFIG_USB_DWC3_GADGET) $(CONFIG_USB_DWC3_DUAL_ROLE)),) + dwc3-y += gadget.o ep0.o +endif ifneq ($(CONFIG_DEBUG_FS),) dwc3-y += debugfs.o @@ -27,19 +33,7 @@ endif ## obj-$(CONFIG_USB_DWC3) += dwc3-omap.o - -## -# REVISIT Samsung Exynos platform needs the clk API which isn't -# defined on all architectures. If we allow dwc3-exynos.c compile -# always we will fail the linking phase on those architectures -# which don't provide clk api implementation and that's unnaceptable. -# -# When Samsung's platform start supporting pm_runtime, this check -# for HAVE_CLK should be removed. -## -ifneq ($(CONFIG_HAVE_CLK),) - obj-$(CONFIG_USB_DWC3) += dwc3-exynos.o -endif +obj-$(CONFIG_USB_DWC3) += dwc3-exynos.o ifneq ($(CONFIG_PCI),) obj-$(CONFIG_USB_DWC3) += dwc3-pci.o diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index c14ebc975ba..ffa6b004a84 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -66,45 +66,6 @@ MODULE_PARM_DESC(maximum_speed, "Maximum supported speed."); /* -------------------------------------------------------------------------- */ -#define DWC3_DEVS_POSSIBLE 32 - -static DECLARE_BITMAP(dwc3_devs, DWC3_DEVS_POSSIBLE); - -int dwc3_get_device_id(void) -{ - int id; - -again: - id = find_first_zero_bit(dwc3_devs, DWC3_DEVS_POSSIBLE); - if (id < DWC3_DEVS_POSSIBLE) { - int old; - - old = test_and_set_bit(id, dwc3_devs); - if (old) - goto again; - } else { - pr_err("dwc3: no space for new device\n"); - id = -ENOMEM; - } - - return id; -} -EXPORT_SYMBOL_GPL(dwc3_get_device_id); - -void dwc3_put_device_id(int id) -{ - int ret; - - if (id < 0) - return; - - ret = test_bit(id, dwc3_devs); - WARN(!ret, "dwc3: ID %d not in use\n", id); - smp_mb__before_clear_bit(); - clear_bit(id, dwc3_devs); -} -EXPORT_SYMBOL_GPL(dwc3_put_device_id); - void dwc3_set_mode(struct dwc3 *dwc, u32 mode) { u32 reg; @@ -169,7 +130,6 @@ static void dwc3_free_one_event_buffer(struct dwc3 *dwc, struct dwc3_event_buffer *evt) { dma_free_coherent(dwc->dev, evt->length, evt->buf, evt->dma); - kfree(evt); } /** @@ -180,12 +140,11 @@ static void dwc3_free_one_event_buffer(struct dwc3 *dwc, * Returns a pointer to the allocated event buffer structure on success * otherwise ERR_PTR(errno). */ -static struct dwc3_event_buffer *__devinit -dwc3_alloc_one_event_buffer(struct dwc3 *dwc, unsigned length) +static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc, unsigned length) { struct dwc3_event_buffer *evt; - evt = kzalloc(sizeof(*evt), GFP_KERNEL); + evt = devm_kzalloc(dwc->dev, sizeof(*evt), GFP_KERNEL); if (!evt) return ERR_PTR(-ENOMEM); @@ -193,10 +152,8 @@ dwc3_alloc_one_event_buffer(struct dwc3 *dwc, unsigned length) evt->length = length; evt->buf = dma_alloc_coherent(dwc->dev, length, &evt->dma, GFP_KERNEL); - if (!evt->buf) { - kfree(evt); + if (!evt->buf) return ERR_PTR(-ENOMEM); - } return evt; } @@ -215,8 +172,6 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc) if (evt) dwc3_free_one_event_buffer(dwc, evt); } - - kfree(dwc->ev_buffs); } /** @@ -227,7 +182,7 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc) * Returns 0 on success otherwise negative errno. In the error case, dwc * may contain some buffers allocated but not all which were requested. */ -static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length) +static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length) { int num; int i; @@ -235,7 +190,8 @@ static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length) num = DWC3_NUM_INT(dwc->hwparams.hwparams1); dwc->num_event_buffers = num; - dwc->ev_buffs = kzalloc(sizeof(*dwc->ev_buffs) * num, GFP_KERNEL); + dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs) * num, + GFP_KERNEL); if (!dwc->ev_buffs) { dev_err(dwc->dev, "can't allocate event buffers array\n"); return -ENOMEM; @@ -303,7 +259,7 @@ static void dwc3_event_buffers_cleanup(struct dwc3 *dwc) } } -static void __devinit dwc3_cache_hwparams(struct dwc3 *dwc) +static void dwc3_cache_hwparams(struct dwc3 *dwc) { struct dwc3_hwparams *parms = &dwc->hwparams; @@ -324,7 +280,7 @@ static void __devinit dwc3_cache_hwparams(struct dwc3 *dwc) * * Returns 0 on success otherwise negative errno. */ -static int __devinit dwc3_core_init(struct dwc3 *dwc) +static int dwc3_core_init(struct dwc3 *dwc) { unsigned long timeout; u32 reg; @@ -358,8 +314,6 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc) dwc3_core_soft_reset(dwc); - dwc3_cache_hwparams(dwc); - reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg &= ~DWC3_GCTL_SCALEDOWN_MASK; reg &= ~DWC3_GCTL_DISSCRAMBLE; @@ -383,24 +337,14 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GCTL, reg); - ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE); - if (ret) { - dev_err(dwc->dev, "failed to allocate event buffers\n"); - ret = -ENOMEM; - goto err1; - } - ret = dwc3_event_buffers_setup(dwc); if (ret) { dev_err(dwc->dev, "failed to setup event buffers\n"); - goto err1; + goto err0; } return 0; -err1: - dwc3_free_event_buffers(dwc); - err0: return ret; } @@ -408,16 +352,14 @@ err0: static void dwc3_core_exit(struct dwc3 *dwc) { dwc3_event_buffers_cleanup(dwc); - dwc3_free_event_buffers(dwc); usb_phy_shutdown(dwc->usb2_phy); usb_phy_shutdown(dwc->usb3_phy); - } #define DWC3_ALIGN_MASK (16 - 1) -static int __devinit dwc3_probe(struct platform_device *pdev) +static int dwc3_probe(struct platform_device *pdev) { struct device_node *node = pdev->dev.of_node; struct resource *res; @@ -478,18 +420,27 @@ static int __devinit dwc3_probe(struct platform_device *pdev) return -ENOMEM; } - dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + if (node) { + dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0); + dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1); + } else { + dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3); + } + if (IS_ERR_OR_NULL(dwc->usb2_phy)) { dev_err(dev, "no usb2 phy configured\n"); return -EPROBE_DEFER; } - dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3); if (IS_ERR_OR_NULL(dwc->usb3_phy)) { dev_err(dev, "no usb3 phy configured\n"); return -EPROBE_DEFER; } + usb_phy_set_suspend(dwc->usb2_phy, 0); + usb_phy_set_suspend(dwc->usb3_phy, 0); + spin_lock_init(&dwc->lock); platform_set_drvdata(pdev, dwc); @@ -508,17 +459,25 @@ static int __devinit dwc3_probe(struct platform_device *pdev) else dwc->maximum_speed = DWC3_DCFG_SUPERSPEED; - if (of_get_property(node, "tx-fifo-resize", NULL)) - dwc->needs_fifo_resize = true; + dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize"); pm_runtime_enable(dev); pm_runtime_get_sync(dev); pm_runtime_forbid(dev); + dwc3_cache_hwparams(dwc); + + ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE); + if (ret) { + dev_err(dwc->dev, "failed to allocate event buffers\n"); + ret = -ENOMEM; + goto err0; + } + ret = dwc3_core_init(dwc); if (ret) { dev_err(dev, "failed to initialize core\n"); - return ret; + goto err0; } mode = DWC3_MODE(dwc->hwparams.hwparams0); @@ -590,15 +549,18 @@ err2: err1: dwc3_core_exit(dwc); +err0: + dwc3_free_event_buffers(dwc); + return ret; } -static int __devexit dwc3_remove(struct platform_device *pdev) +static int dwc3_remove(struct platform_device *pdev) { struct dwc3 *dwc = platform_get_drvdata(pdev); - struct resource *res; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + usb_phy_set_suspend(dwc->usb2_phy, 1); + usb_phy_set_suspend(dwc->usb3_phy, 1); pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); @@ -621,16 +583,28 @@ static int __devexit dwc3_remove(struct platform_device *pdev) break; } + dwc3_free_event_buffers(dwc); dwc3_core_exit(dwc); return 0; } +#ifdef CONFIG_OF +static const struct of_device_id of_dwc3_match[] = { + { + .compatible = "synopsys,dwc3" + }, + { }, +}; +MODULE_DEVICE_TABLE(of, of_dwc3_match); +#endif + static struct platform_driver dwc3_driver = { .probe = dwc3_probe, - .remove = __devexit_p(dwc3_remove), + .remove = dwc3_remove, .driver = { .name = "dwc3", + .of_match_table = of_match_ptr(of_dwc3_match), }, }; diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 243affc9343..b4175066023 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -55,7 +55,9 @@ #define DWC3_ENDPOINTS_NUM 32 #define DWC3_XHCI_RESOURCES_NUM 2 -#define DWC3_EVENT_BUFFERS_SIZE PAGE_SIZE +#define DWC3_EVENT_SIZE 4 /* bytes */ +#define DWC3_EVENT_MAX_NUM 64 /* 2 events/endpoint */ +#define DWC3_EVENT_BUFFERS_SIZE (DWC3_EVENT_SIZE * DWC3_EVENT_MAX_NUM) #define DWC3_EVENT_TYPE_MASK 0xfe #define DWC3_EVENT_TYPE_DEV 0 @@ -405,7 +407,6 @@ struct dwc3_event_buffer { * @number: endpoint number (1 - 15) * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK * @resource_index: Resource transfer index - * @current_uf: Current uf received through last event parameter * @interval: the intervall on which the ISOC transfer is started * @name: a human readable name e.g. ep1out-bulk * @direction: true for TX, false for RX @@ -439,7 +440,6 @@ struct dwc3_ep { u8 number; u8 type; u8 resource_index; - u16 current_uf; u32 interval; char name[20]; @@ -581,6 +581,7 @@ struct dwc3_request { struct usb_request request; struct list_head list; struct dwc3_ep *dep; + u32 start_slot; u8 epnum; struct dwc3_trb *trb; @@ -721,6 +722,7 @@ struct dwc3 { struct dwc3_hwparams hwparams; struct dentry *root; + struct debugfs_regset32 *regset; u8 test_mode; u8 test_mode_nr; @@ -862,13 +864,24 @@ union dwc3_event { void dwc3_set_mode(struct dwc3 *dwc, u32 mode); int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc); +#if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) int dwc3_host_init(struct dwc3 *dwc); void dwc3_host_exit(struct dwc3 *dwc); - +#else +static inline int dwc3_host_init(struct dwc3 *dwc) +{ return 0; } +static inline void dwc3_host_exit(struct dwc3 *dwc) +{ } +#endif + +#if IS_ENABLED(CONFIG_USB_DWC3_GADGET) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) int dwc3_gadget_init(struct dwc3 *dwc); void dwc3_gadget_exit(struct dwc3 *dwc); - -extern int dwc3_get_device_id(void); -extern void dwc3_put_device_id(int id); +#else +static inline int dwc3_gadget_init(struct dwc3 *dwc) +{ return 0; } +static inline void dwc3_gadget_exit(struct dwc3 *dwc) +{ } +#endif #endif /* __DRIVERS_USB_DWC3_CORE_H */ diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c index d4a30f11872..4a752e730c5 100644 --- a/drivers/usb/dwc3/debugfs.c +++ b/drivers/usb/dwc3/debugfs.c @@ -56,10 +56,10 @@ #define dump_register(nm) \ { \ .name = __stringify(nm), \ - .offset = DWC3_ ##nm, \ + .offset = DWC3_ ##nm - DWC3_GLOBALS_REGS_START, \ } -static const struct debugfs_reg32 dwc3_regs[] = { +static struct debugfs_reg32 dwc3_regs[] = { dump_register(GSBUSCFG0), dump_register(GSBUSCFG1), dump_register(GTXTHRCFG), @@ -376,27 +376,6 @@ static const struct debugfs_reg32 dwc3_regs[] = { dump_register(OSTS), }; -static int dwc3_regdump_show(struct seq_file *s, void *unused) -{ - struct dwc3 *dwc = s->private; - - seq_printf(s, "DesignWare USB3 Core Register Dump\n"); - debugfs_print_regs32(s, dwc3_regs, ARRAY_SIZE(dwc3_regs), - dwc->regs, ""); - return 0; -} - -static int dwc3_regdump_open(struct inode *inode, struct file *file) -{ - return single_open(file, dwc3_regdump_show, inode->i_private); -} - -static const struct file_operations dwc3_regdump_fops = { - .open = dwc3_regdump_open, - .read = seq_read, - .release = single_release, -}; - static int dwc3_mode_show(struct seq_file *s, void *unused) { struct dwc3 *dwc = s->private; @@ -652,7 +631,7 @@ static const struct file_operations dwc3_link_state_fops = { .release = single_release, }; -int __devinit dwc3_debugfs_init(struct dwc3 *dwc) +int dwc3_debugfs_init(struct dwc3 *dwc) { struct dentry *root; struct dentry *file; @@ -666,13 +645,23 @@ int __devinit dwc3_debugfs_init(struct dwc3 *dwc) dwc->root = root; - file = debugfs_create_file("regdump", S_IRUGO, root, dwc, - &dwc3_regdump_fops); + dwc->regset = kzalloc(sizeof(*dwc->regset), GFP_KERNEL); + if (!dwc->regset) { + ret = -ENOMEM; + goto err1; + } + + dwc->regset->regs = dwc3_regs; + dwc->regset->nregs = ARRAY_SIZE(dwc3_regs); + dwc->regset->base = dwc->regs; + + file = debugfs_create_regset32("regdump", S_IRUGO, root, dwc->regset); if (!file) { ret = -ENOMEM; goto err1; } +#if IS_ENABLED(CONFIG_USB_DWC3_GADGET) file = debugfs_create_file("mode", S_IRUGO | S_IWUSR, root, dwc, &dwc3_mode_fops); if (!file) { @@ -693,6 +682,7 @@ int __devinit dwc3_debugfs_init(struct dwc3 *dwc) ret = -ENOMEM; goto err1; } +#endif return 0; @@ -703,7 +693,7 @@ err0: return ret; } -void __devexit dwc3_debugfs_exit(struct dwc3 *dwc) +void dwc3_debugfs_exit(struct dwc3 *dwc) { debugfs_remove_recursive(dwc->root); dwc->root = NULL; diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index ca6597853f9..b082bec7343 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -21,8 +21,7 @@ #include <linux/clk.h> #include <linux/usb/otg.h> #include <linux/usb/nop-usb-xceiv.h> - -#include "core.h" +#include <linux/of.h> struct dwc3_exynos { struct platform_device *dwc3; @@ -33,7 +32,7 @@ struct dwc3_exynos { struct clk *clk; }; -static int __devinit dwc3_exynos_register_phys(struct dwc3_exynos *exynos) +static int dwc3_exynos_register_phys(struct dwc3_exynos *exynos) { struct nop_usb_xceiv_platform_data pdata; struct platform_device *pdev; @@ -41,7 +40,7 @@ static int __devinit dwc3_exynos_register_phys(struct dwc3_exynos *exynos) memset(&pdata, 0x00, sizeof(pdata)); - pdev = platform_device_alloc("nop_usb_xceiv", 0); + pdev = platform_device_alloc("nop_usb_xceiv", PLATFORM_DEVID_AUTO); if (!pdev) return -ENOMEM; @@ -52,7 +51,7 @@ static int __devinit dwc3_exynos_register_phys(struct dwc3_exynos *exynos) if (ret) goto err1; - pdev = platform_device_alloc("nop_usb_xceiv", 1); + pdev = platform_device_alloc("nop_usb_xceiv", PLATFORM_DEVID_AUTO); if (!pdev) { ret = -ENOMEM; goto err1; @@ -87,124 +86,113 @@ err1: return ret; } -static int __devinit dwc3_exynos_probe(struct platform_device *pdev) +static u64 dwc3_exynos_dma_mask = DMA_BIT_MASK(32); + +static int dwc3_exynos_probe(struct platform_device *pdev) { - struct dwc3_exynos_data *pdata = pdev->dev.platform_data; struct platform_device *dwc3; struct dwc3_exynos *exynos; struct clk *clk; + struct device *dev = &pdev->dev; - int devid; int ret = -ENOMEM; - exynos = kzalloc(sizeof(*exynos), GFP_KERNEL); + exynos = devm_kzalloc(dev, sizeof(*exynos), GFP_KERNEL); if (!exynos) { - dev_err(&pdev->dev, "not enough memory\n"); - goto err0; + dev_err(dev, "not enough memory\n"); + return -ENOMEM; } - platform_set_drvdata(pdev, exynos); + /* + * Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we move to full device tree support this will vanish off. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &dwc3_exynos_dma_mask; - devid = dwc3_get_device_id(); - if (devid < 0) - goto err1; + platform_set_drvdata(pdev, exynos); ret = dwc3_exynos_register_phys(exynos); if (ret) { - dev_err(&pdev->dev, "couldn't register PHYs\n"); - goto err1; + dev_err(dev, "couldn't register PHYs\n"); + return ret; } - dwc3 = platform_device_alloc("dwc3", devid); + dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO); if (!dwc3) { - dev_err(&pdev->dev, "couldn't allocate dwc3 device\n"); - goto err2; + dev_err(dev, "couldn't allocate dwc3 device\n"); + return -ENOMEM; } - clk = clk_get(&pdev->dev, "usbdrd30"); + clk = devm_clk_get(dev, "usbdrd30"); if (IS_ERR(clk)) { - dev_err(&pdev->dev, "couldn't get clock\n"); + dev_err(dev, "couldn't get clock\n"); ret = -EINVAL; - goto err3; + goto err1; } - dma_set_coherent_mask(&dwc3->dev, pdev->dev.coherent_dma_mask); + dma_set_coherent_mask(&dwc3->dev, dev->coherent_dma_mask); - dwc3->dev.parent = &pdev->dev; - dwc3->dev.dma_mask = pdev->dev.dma_mask; - dwc3->dev.dma_parms = pdev->dev.dma_parms; + dwc3->dev.parent = dev; + dwc3->dev.dma_mask = dev->dma_mask; + dwc3->dev.dma_parms = dev->dma_parms; exynos->dwc3 = dwc3; - exynos->dev = &pdev->dev; + exynos->dev = dev; exynos->clk = clk; clk_enable(exynos->clk); - /* PHY initialization */ - if (!pdata) { - dev_dbg(&pdev->dev, "missing platform data\n"); - } else { - if (pdata->phy_init) - pdata->phy_init(pdev, pdata->phy_type); - } - ret = platform_device_add_resources(dwc3, pdev->resource, pdev->num_resources); if (ret) { - dev_err(&pdev->dev, "couldn't add resources to dwc3 device\n"); - goto err4; + dev_err(dev, "couldn't add resources to dwc3 device\n"); + goto err2; } ret = platform_device_add(dwc3); if (ret) { - dev_err(&pdev->dev, "failed to register dwc3 device\n"); - goto err4; + dev_err(dev, "failed to register dwc3 device\n"); + goto err2; } return 0; -err4: - if (pdata && pdata->phy_exit) - pdata->phy_exit(pdev, pdata->phy_type); - - clk_disable(clk); - clk_put(clk); -err3: - platform_device_put(dwc3); err2: - dwc3_put_device_id(devid); + clk_disable(clk); err1: - kfree(exynos); -err0: + platform_device_put(dwc3); + return ret; } -static int __devexit dwc3_exynos_remove(struct platform_device *pdev) +static int dwc3_exynos_remove(struct platform_device *pdev) { struct dwc3_exynos *exynos = platform_get_drvdata(pdev); - struct dwc3_exynos_data *pdata = pdev->dev.platform_data; platform_device_unregister(exynos->dwc3); platform_device_unregister(exynos->usb2_phy); platform_device_unregister(exynos->usb3_phy); - dwc3_put_device_id(exynos->dwc3->id); - - if (pdata && pdata->phy_exit) - pdata->phy_exit(pdev, pdata->phy_type); - clk_disable(exynos->clk); - clk_put(exynos->clk); - - kfree(exynos); return 0; } +#ifdef CONFIG_OF +static const struct of_device_id exynos_dwc3_match[] = { + { .compatible = "samsung,exynos5250-dwusb3" }, + {}, +}; +MODULE_DEVICE_TABLE(of, exynos_dwc3_match); +#endif + static struct platform_driver dwc3_exynos_driver = { .probe = dwc3_exynos_probe, - .remove = __devexit_p(dwc3_exynos_remove), + .remove = dwc3_exynos_remove, .driver = { .name = "exynos-dwc3", + .of_match_table = of_match_ptr(exynos_dwc3_match), }, }; diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index ee57a10d90d..afa05e3c9cf 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -43,16 +43,17 @@ #include <linux/spinlock.h> #include <linux/platform_device.h> #include <linux/platform_data/dwc3-omap.h> +#include <linux/usb/dwc3-omap.h> +#include <linux/pm_runtime.h> #include <linux/dma-mapping.h> #include <linux/ioport.h> #include <linux/io.h> #include <linux/of.h> +#include <linux/of_platform.h> #include <linux/usb/otg.h> #include <linux/usb/nop-usb-xceiv.h> -#include "core.h" - /* * All these registers belong to OMAP's Wrapper around the * DesignWare USB3 Core. @@ -78,23 +79,6 @@ /* SYSCONFIG REGISTER */ #define USBOTGSS_SYSCONFIG_DMADISABLE (1 << 16) -#define USBOTGSS_SYSCONFIG_STANDBYMODE(x) ((x) << 4) - -#define USBOTGSS_STANDBYMODE_FORCE_STANDBY 0 -#define USBOTGSS_STANDBYMODE_NO_STANDBY 1 -#define USBOTGSS_STANDBYMODE_SMART_STANDBY 2 -#define USBOTGSS_STANDBYMODE_SMART_WAKEUP 3 - -#define USBOTGSS_STANDBYMODE_MASK (0x03 << 4) - -#define USBOTGSS_SYSCONFIG_IDLEMODE(x) ((x) << 2) - -#define USBOTGSS_IDLEMODE_FORCE_IDLE 0 -#define USBOTGSS_IDLEMODE_NO_IDLE 1 -#define USBOTGSS_IDLEMODE_SMART_IDLE 2 -#define USBOTGSS_IDLEMODE_SMART_WAKEUP 3 - -#define USBOTGSS_IDLEMODE_MASK (0x03 << 2) /* IRQ_EOI REGISTER */ #define USBOTGSS_IRQ_EOI_LINE_NUMBER (1 << 0) @@ -133,7 +117,6 @@ struct dwc3_omap { /* device lock */ spinlock_t lock; - struct platform_device *dwc3; struct platform_device *usb2_phy; struct platform_device *usb3_phy; struct device *dev; @@ -147,6 +130,8 @@ struct dwc3_omap { u32 dma_status:1; }; +struct dwc3_omap *_omap; + static inline u32 dwc3_omap_readl(void __iomem *base, u32 offset) { return readl(base + offset); @@ -157,7 +142,58 @@ static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value) writel(value, base + offset); } -static int __devinit dwc3_omap_register_phys(struct dwc3_omap *omap) +void dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status) +{ + u32 val; + struct dwc3_omap *omap = _omap; + + switch (status) { + case OMAP_DWC3_ID_GROUND: + dev_dbg(omap->dev, "ID GND\n"); + + val = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS); + val &= ~(USBOTGSS_UTMI_OTG_STATUS_IDDIG + | USBOTGSS_UTMI_OTG_STATUS_VBUSVALID + | USBOTGSS_UTMI_OTG_STATUS_SESSEND); + val |= USBOTGSS_UTMI_OTG_STATUS_SESSVALID + | USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT; + dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, val); + break; + + case OMAP_DWC3_VBUS_VALID: + dev_dbg(omap->dev, "VBUS Connect\n"); + + val = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS); + val &= ~USBOTGSS_UTMI_OTG_STATUS_SESSEND; + val |= USBOTGSS_UTMI_OTG_STATUS_IDDIG + | USBOTGSS_UTMI_OTG_STATUS_VBUSVALID + | USBOTGSS_UTMI_OTG_STATUS_SESSVALID + | USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT; + dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, val); + break; + + case OMAP_DWC3_ID_FLOAT: + case OMAP_DWC3_VBUS_OFF: + dev_dbg(omap->dev, "VBUS Disconnect\n"); + + val = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS); + val &= ~(USBOTGSS_UTMI_OTG_STATUS_SESSVALID + | USBOTGSS_UTMI_OTG_STATUS_VBUSVALID + | USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT); + val |= USBOTGSS_UTMI_OTG_STATUS_SESSEND + | USBOTGSS_UTMI_OTG_STATUS_IDDIG; + dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, val); + break; + + default: + dev_dbg(omap->dev, "ID float\n"); + } + + return; +} +EXPORT_SYMBOL_GPL(dwc3_omap_mailbox); + +static int dwc3_omap_register_phys(struct dwc3_omap *omap) { struct nop_usb_xceiv_platform_data pdata; struct platform_device *pdev; @@ -165,7 +201,7 @@ static int __devinit dwc3_omap_register_phys(struct dwc3_omap *omap) memset(&pdata, 0x00, sizeof(pdata)); - pdev = platform_device_alloc("nop_usb_xceiv", 0); + pdev = platform_device_alloc("nop_usb_xceiv", PLATFORM_DEVID_AUTO); if (!pdev) return -ENOMEM; @@ -176,7 +212,7 @@ static int __devinit dwc3_omap_register_phys(struct dwc3_omap *omap) if (ret) goto err1; - pdev = platform_device_alloc("nop_usb_xceiv", 1); + pdev = platform_device_alloc("nop_usb_xceiv", PLATFORM_DEVID_AUTO); if (!pdev) { ret = -ENOMEM; goto err1; @@ -262,17 +298,24 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap) return IRQ_HANDLED; } -static int __devinit dwc3_omap_probe(struct platform_device *pdev) +static int dwc3_omap_remove_core(struct device *dev, void *c) +{ + struct platform_device *pdev = to_platform_device(dev); + + platform_device_unregister(pdev); + + return 0; +} + +static int dwc3_omap_probe(struct platform_device *pdev) { struct dwc3_omap_data *pdata = pdev->dev.platform_data; struct device_node *node = pdev->dev.of_node; - struct platform_device *dwc3; struct dwc3_omap *omap; struct resource *res; struct device *dev = &pdev->dev; - int devid; int size; int ret = -ENOMEM; int irq; @@ -315,34 +358,32 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev) return ret; } - devid = dwc3_get_device_id(); - if (devid < 0) - return -ENODEV; - - dwc3 = platform_device_alloc("dwc3", devid); - if (!dwc3) { - dev_err(dev, "couldn't allocate dwc3 device\n"); - goto err1; - } - context = devm_kzalloc(dev, resource_size(res), GFP_KERNEL); if (!context) { dev_err(dev, "couldn't allocate dwc3 context memory\n"); - goto err2; + return -ENOMEM; } spin_lock_init(&omap->lock); - dma_set_coherent_mask(&dwc3->dev, dev->coherent_dma_mask); - dwc3->dev.parent = dev; - dwc3->dev.dma_mask = dev->dma_mask; - dwc3->dev.dma_parms = dev->dma_parms; omap->resource_size = resource_size(res); omap->context = context; omap->dev = dev; omap->irq = irq; omap->base = base; - omap->dwc3 = dwc3; + + /* + * REVISIT if we ever have two instances of the wrapper, we will be + * in big trouble + */ + _omap = omap; + + pm_runtime_enable(dev); + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + dev_err(dev, "get_sync failed with err %d\n", ret); + return ret; + } reg = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS); @@ -373,21 +414,12 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev) reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG); omap->dma_status = !!(reg & USBOTGSS_SYSCONFIG_DMADISABLE); - /* Set No-Idle and No-Standby */ - reg &= ~(USBOTGSS_STANDBYMODE_MASK - | USBOTGSS_IDLEMODE_MASK); - - reg |= (USBOTGSS_SYSCONFIG_STANDBYMODE(USBOTGSS_STANDBYMODE_NO_STANDBY) - | USBOTGSS_SYSCONFIG_IDLEMODE(USBOTGSS_IDLEMODE_NO_IDLE)); - - dwc3_omap_writel(omap->base, USBOTGSS_SYSCONFIG, reg); - ret = devm_request_irq(dev, omap->irq, dwc3_omap_interrupt, 0, "dwc3-omap", omap); if (ret) { dev_err(dev, "failed to request IRQ #%d --> %d\n", omap->irq, ret); - goto err2; + return ret; } /* enable all IRQs */ @@ -406,57 +438,45 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev) dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg); - ret = platform_device_add_resources(dwc3, pdev->resource, - pdev->num_resources); - if (ret) { - dev_err(dev, "couldn't add resources to dwc3 device\n"); - goto err2; - } - - ret = platform_device_add(dwc3); - if (ret) { - dev_err(dev, "failed to register dwc3 device\n"); - goto err2; + if (node) { + ret = of_platform_populate(node, NULL, NULL, dev); + if (ret) { + dev_err(&pdev->dev, + "failed to add create dwc3 core\n"); + return ret; + } } return 0; - -err2: - platform_device_put(dwc3); - -err1: - dwc3_put_device_id(devid); - - return ret; } -static int __devexit dwc3_omap_remove(struct platform_device *pdev) +static int dwc3_omap_remove(struct platform_device *pdev) { struct dwc3_omap *omap = platform_get_drvdata(pdev); - platform_device_unregister(omap->dwc3); platform_device_unregister(omap->usb2_phy); platform_device_unregister(omap->usb3_phy); - - dwc3_put_device_id(omap->dwc3->id); + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + device_for_each_child(&pdev->dev, NULL, dwc3_omap_remove_core); return 0; } -static const struct of_device_id of_dwc3_matach[] = { +static const struct of_device_id of_dwc3_match[] = { { "ti,dwc3", }, { }, }; -MODULE_DEVICE_TABLE(of, of_dwc3_matach); +MODULE_DEVICE_TABLE(of, of_dwc3_match); static struct platform_driver dwc3_omap_driver = { .probe = dwc3_omap_probe, - .remove = __devexit_p(dwc3_omap_remove), + .remove = dwc3_omap_remove, .driver = { .name = "omap-dwc3", - .of_match_table = of_dwc3_matach, + .of_match_table = of_dwc3_match, }, }; diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 94f550e37f9..e8d77689a32 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -45,8 +45,6 @@ #include <linux/usb/otg.h> #include <linux/usb/nop-usb-xceiv.h> -#include "core.h" - /* FIXME define these in <linux/pci_ids.h> */ #define PCI_VENDOR_ID_SYNOPSYS 0x16c3 #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd @@ -58,7 +56,7 @@ struct dwc3_pci { struct platform_device *usb3_phy; }; -static int __devinit dwc3_pci_register_phys(struct dwc3_pci *glue) +static int dwc3_pci_register_phys(struct dwc3_pci *glue) { struct nop_usb_xceiv_platform_data pdata; struct platform_device *pdev; @@ -112,14 +110,13 @@ err1: return ret; } -static int __devinit dwc3_pci_probe(struct pci_dev *pci, +static int dwc3_pci_probe(struct pci_dev *pci, const struct pci_device_id *id) { struct resource res[2]; struct platform_device *dwc3; struct dwc3_pci *glue; int ret = -ENOMEM; - int devid; struct device *dev = &pci->dev; glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL); @@ -145,13 +142,7 @@ static int __devinit dwc3_pci_probe(struct pci_dev *pci, return ret; } - devid = dwc3_get_device_id(); - if (devid < 0) { - ret = -ENOMEM; - goto err1; - } - - dwc3 = platform_device_alloc("dwc3", devid); + dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO); if (!dwc3) { dev_err(dev, "couldn't allocate dwc3 device\n"); ret = -ENOMEM; @@ -172,7 +163,7 @@ static int __devinit dwc3_pci_probe(struct pci_dev *pci, ret = platform_device_add_resources(dwc3, res, ARRAY_SIZE(res)); if (ret) { dev_err(dev, "couldn't add resources to dwc3 device\n"); - goto err2; + goto err1; } pci_set_drvdata(pci, glue); @@ -195,23 +186,18 @@ static int __devinit dwc3_pci_probe(struct pci_dev *pci, err3: pci_set_drvdata(pci, NULL); platform_device_put(dwc3); - -err2: - dwc3_put_device_id(devid); - err1: pci_disable_device(pci); return ret; } -static void __devexit dwc3_pci_remove(struct pci_dev *pci) +static void dwc3_pci_remove(struct pci_dev *pci) { struct dwc3_pci *glue = pci_get_drvdata(pci); platform_device_unregister(glue->usb2_phy); platform_device_unregister(glue->usb3_phy); - dwc3_put_device_id(glue->dwc3->id); platform_device_unregister(glue->dwc3); pci_set_drvdata(pci, NULL); pci_disable_device(pci); @@ -230,7 +216,7 @@ static struct pci_driver dwc3_pci_driver = { .name = "dwc3-pci", .id_table = dwc3_pci_id_table, .probe = dwc3_pci_probe, - .remove = __devexit_p(dwc3_pci_remove), + .remove = dwc3_pci_remove, }; MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index d7da073a23f..1d139ca05ef 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -891,7 +891,8 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, DWC3_TRBCTL_CONTROL_DATA); } else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) && (dep->number == 0)) { - u32 transfer_size; + u32 transfer_size; + u32 maxpacket; ret = usb_gadget_map_request(&dwc->gadget, &req->request, dep->number); @@ -902,8 +903,8 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, WARN_ON(req->request.length > DWC3_EP0_BOUNCE_SIZE); - transfer_size = roundup(req->request.length, - (u32) dep->endpoint.maxpacket); + maxpacket = dep->endpoint.maxpacket; + transfer_size = roundup(req->request.length, maxpacket); dwc->ep0_bounced = true; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 7b7deddf6a5..82e160e96fc 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -241,21 +241,23 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, int status) { struct dwc3 *dwc = dep->dwc; + int i; if (req->queued) { - if (req->request.num_mapped_sgs) - dep->busy_slot += req->request.num_mapped_sgs; - else + i = 0; + do { dep->busy_slot++; - - /* - * Skip LINK TRB. We can't use req->trb and check for - * DWC3_TRBCTL_LINK_TRB because it points the TRB we just - * completed (not the LINK TRB). - */ - if (((dep->busy_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) && + /* + * Skip LINK TRB. We can't use req->trb and check for + * DWC3_TRBCTL_LINK_TRB because it points the TRB we + * just completed (not the LINK TRB). + */ + if (((dep->busy_slot & DWC3_TRB_MASK) == + DWC3_TRB_NUM- 1) && usb_endpoint_xfer_isoc(dep->endpoint.desc)) - dep->busy_slot++; + dep->busy_slot++; + } while(++i < req->request.num_mapped_sgs); + req->queued = false; } list_del(&req->list); req->trb = NULL; @@ -749,33 +751,32 @@ static void dwc3_gadget_ep_free_request(struct usb_ep *ep, */ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_request *req, dma_addr_t dma, - unsigned length, unsigned last, unsigned chain) + unsigned length, unsigned last, unsigned chain, unsigned node) { struct dwc3 *dwc = dep->dwc; struct dwc3_trb *trb; - unsigned int cur_slot; - dev_vdbg(dwc->dev, "%s: req %p dma %08llx length %d%s%s\n", dep->name, req, (unsigned long long) dma, length, last ? " last" : "", chain ? " chain" : ""); - trb = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK]; - cur_slot = dep->free_slot; - dep->free_slot++; - /* Skip the LINK-TRB on ISOC */ - if (((cur_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) && + if (((dep->free_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) && usb_endpoint_xfer_isoc(dep->endpoint.desc)) - return; + dep->free_slot++; + + trb = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK]; if (!req->trb) { dwc3_gadget_move_request_queued(req); req->trb = trb; req->trb_dma = dwc3_trb_dma_offset(dep, trb); + req->start_slot = dep->free_slot & DWC3_TRB_MASK; } + dep->free_slot++; + trb->size = DWC3_TRB_SIZE_LENGTH(length); trb->bpl = lower_32_bits(dma); trb->bph = upper_32_bits(dma); @@ -786,9 +787,12 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, break; case USB_ENDPOINT_XFER_ISOC: - trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS_FIRST; + if (!node) + trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS_FIRST; + else + trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS; - if (!req->request.no_interrupt) + if (!req->request.no_interrupt && !chain) trb->ctrl |= DWC3_TRB_CTRL_IOC; break; @@ -807,14 +811,13 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI; trb->ctrl |= DWC3_TRB_CTRL_CSP; - } else { - if (chain) - trb->ctrl |= DWC3_TRB_CTRL_CHN; - - if (last) - trb->ctrl |= DWC3_TRB_CTRL_LST; + } else if (last) { + trb->ctrl |= DWC3_TRB_CTRL_LST; } + if (chain) + trb->ctrl |= DWC3_TRB_CTRL_CHN; + if (usb_endpoint_xfer_bulk(dep->endpoint.desc) && dep->stream_capable) trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(req->request.stream_id); @@ -885,6 +888,7 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting) list_for_each_entry_safe(req, n, &dep->request_list, list) { unsigned length; dma_addr_t dma; + last_one = false; if (req->request.num_mapped_sgs > 0) { struct usb_request *request = &req->request; @@ -900,7 +904,9 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting) if (i == (request->num_mapped_sgs - 1) || sg_is_last(s)) { - last_one = true; + if (list_is_last(&req->list, + &dep->request_list)) + last_one = true; chain = false; } @@ -912,7 +918,7 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting) chain = false; dwc3_prepare_one_trb(dep, req, dma, length, - last_one, chain); + last_one, chain, i); if (last_one) break; @@ -930,7 +936,7 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting) last_one = 1; dwc3_prepare_one_trb(dep, req, dma, length, - last_one, false); + last_one, false, 0); if (last_one) break; @@ -977,13 +983,14 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param, } memset(¶ms, 0, sizeof(params)); - params.param0 = upper_32_bits(req->trb_dma); - params.param1 = lower_32_bits(req->trb_dma); - if (start_new) + if (start_new) { + params.param0 = upper_32_bits(req->trb_dma); + params.param1 = lower_32_bits(req->trb_dma); cmd = DWC3_DEPCMD_STARTTRANSFER; - else + } else { cmd = DWC3_DEPCMD_UPDATETRANSFER; + } cmd |= DWC3_DEPCMD_PARAM(cmd_param); ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); @@ -1082,8 +1089,6 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) * */ if (dep->flags & DWC3_EP_PENDING_REQUEST) { - int ret; - /* * If xfernotready is already elapsed and it is a case * of isoc transfer, then issue END TRANSFER, so that @@ -1091,7 +1096,10 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) * notion of current microframe. */ if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { - dwc3_stop_active_transfer(dwc, dep->number); + if (list_empty(&dep->req_queued)) { + dwc3_stop_active_transfer(dwc, dep->number); + dep->flags = DWC3_EP_ENABLED; + } return 0; } @@ -1099,6 +1107,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) if (ret && ret != -EBUSY) dev_dbg(dwc->dev, "%s: failed to kick transfers\n", dep->name); + return ret; } /* @@ -1115,16 +1124,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) if (ret && ret != -EBUSY) dev_dbg(dwc->dev, "%s: failed to kick transfers\n", dep->name); - } - - /* - * 3. Missed ISOC Handling. We need to start isoc transfer on the saved - * uframe number. - */ - if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && - (dep->flags & DWC3_EP_MISSED_ISOC)) { - __dwc3_gadget_start_isoc(dwc, dep, dep->current_uf); - dep->flags &= ~DWC3_EP_MISSED_ISOC; + return ret; } return 0; @@ -1579,7 +1579,7 @@ static const struct usb_gadget_ops dwc3_gadget_ops = { /* -------------------------------------------------------------------------- */ -static int __devinit dwc3_gadget_init_endpoints(struct dwc3 *dwc) +static int dwc3_gadget_init_endpoints(struct dwc3 *dwc) { struct dwc3_ep *dep; u8 epnum; @@ -1605,6 +1605,7 @@ static int __devinit dwc3_gadget_init_endpoints(struct dwc3 *dwc) if (epnum == 0 || epnum == 1) { dep->endpoint.maxpacket = 512; + dep->endpoint.maxburst = 1; dep->endpoint.ops = &dwc3_gadget_ep0_ops; if (!epnum) dwc->gadget.ep0 = &dep->endpoint; @@ -1651,76 +1652,134 @@ static void dwc3_gadget_release(struct device *dev) } /* -------------------------------------------------------------------------- */ -static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, +static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, + struct dwc3_request *req, struct dwc3_trb *trb, const struct dwc3_event_depevt *event, int status) { - struct dwc3_request *req; - struct dwc3_trb *trb; unsigned int count; unsigned int s_pkt = 0; unsigned int trb_status; + if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN) + /* + * We continue despite the error. There is not much we + * can do. If we don't clean it up we loop forever. If + * we skip the TRB then it gets overwritten after a + * while since we use them in a ring buffer. A BUG() + * would help. Lets hope that if this occurs, someone + * fixes the root cause instead of looking away :) + */ + dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n", + dep->name, trb); + count = trb->size & DWC3_TRB_SIZE_MASK; + + if (dep->direction) { + if (count) { + trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size); + if (trb_status == DWC3_TRBSTS_MISSED_ISOC) { + dev_dbg(dwc->dev, "incomplete IN transfer %s\n", + dep->name); + /* + * If missed isoc occurred and there is + * no request queued then issue END + * TRANSFER, so that core generates + * next xfernotready and we will issue + * a fresh START TRANSFER. + * If there are still queued request + * then wait, do not issue either END + * or UPDATE TRANSFER, just attach next + * request in request_list during + * giveback.If any future queued request + * is successfully transferred then we + * will issue UPDATE TRANSFER for all + * request in the request_list. + */ + dep->flags |= DWC3_EP_MISSED_ISOC; + } else { + dev_err(dwc->dev, "incomplete IN transfer %s\n", + dep->name); + status = -ECONNRESET; + } + } else { + dep->flags &= ~DWC3_EP_MISSED_ISOC; + } + } else { + if (count && (event->status & DEPEVT_STATUS_SHORT)) + s_pkt = 1; + } + + /* + * We assume here we will always receive the entire data block + * which we should receive. Meaning, if we program RX to + * receive 4K but we receive only 2K, we assume that's all we + * should receive and we simply bounce the request back to the + * gadget driver for further processing. + */ + req->request.actual += req->request.length - count; + if (s_pkt) + return 1; + if ((event->status & DEPEVT_STATUS_LST) && + (trb->ctrl & (DWC3_TRB_CTRL_LST | + DWC3_TRB_CTRL_HWO))) + return 1; + if ((event->status & DEPEVT_STATUS_IOC) && + (trb->ctrl & DWC3_TRB_CTRL_IOC)) + return 1; + return 0; +} + +static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, + const struct dwc3_event_depevt *event, int status) +{ + struct dwc3_request *req; + struct dwc3_trb *trb; + unsigned int slot; + unsigned int i; + int ret; + do { req = next_request(&dep->req_queued); if (!req) { WARN_ON_ONCE(1); return 1; } + i = 0; + do { + slot = req->start_slot + i; + if ((slot == DWC3_TRB_NUM - 1) && + usb_endpoint_xfer_isoc(dep->endpoint.desc)) + slot++; + slot %= DWC3_TRB_NUM; + trb = &dep->trb_pool[slot]; + + ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb, + event, status); + if (ret) + break; + }while (++i < req->request.num_mapped_sgs); - trb = req->trb; + dwc3_gadget_giveback(dep, req, status); + + if (ret) + break; + } while (1); - if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN) + if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && + list_empty(&dep->req_queued)) { + if (list_empty(&dep->request_list)) { /* - * We continue despite the error. There is not much we - * can do. If we don't clean it up we loop forever. If - * we skip the TRB then it gets overwritten after a - * while since we use them in a ring buffer. A BUG() - * would help. Lets hope that if this occurs, someone - * fixes the root cause instead of looking away :) + * If there is no entry in request list then do + * not issue END TRANSFER now. Just set PENDING + * flag, so that END TRANSFER is issued when an + * entry is added into request list. */ - dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n", - dep->name, req->trb); - count = trb->size & DWC3_TRB_SIZE_MASK; - - if (dep->direction) { - if (count) { - trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size); - if (trb_status == DWC3_TRBSTS_MISSED_ISOC) { - dev_dbg(dwc->dev, "incomplete IN transfer %s\n", - dep->name); - dep->current_uf = event->parameters & - ~(dep->interval - 1); - dep->flags |= DWC3_EP_MISSED_ISOC; - } else { - dev_err(dwc->dev, "incomplete IN transfer %s\n", - dep->name); - status = -ECONNRESET; - } - } + dep->flags = DWC3_EP_PENDING_REQUEST; } else { - if (count && (event->status & DEPEVT_STATUS_SHORT)) - s_pkt = 1; + dwc3_stop_active_transfer(dwc, dep->number); + dep->flags = DWC3_EP_ENABLED; } - - /* - * We assume here we will always receive the entire data block - * which we should receive. Meaning, if we program RX to - * receive 4K but we receive only 2K, we assume that's all we - * should receive and we simply bounce the request back to the - * gadget driver for further processing. - */ - req->request.actual += req->request.length - count; - dwc3_gadget_giveback(dep, req, status); - if (s_pkt) - break; - if ((event->status & DEPEVT_STATUS_LST) && - (trb->ctrl & (DWC3_TRB_CTRL_LST | - DWC3_TRB_CTRL_HWO))) - break; - if ((event->status & DEPEVT_STATUS_IOC) && - (trb->ctrl & DWC3_TRB_CTRL_IOC)) - break; - } while (1); + return 1; + } if ((event->status & DEPEVT_STATUS_IOC) && (trb->ctrl & DWC3_TRB_CTRL_IOC)) @@ -2100,7 +2159,6 @@ static void dwc3_gadget_phy_suspend(struct dwc3 *dwc, u8 speed) static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) { - struct dwc3_gadget_ep_cmd_params params; struct dwc3_ep *dep; int ret; u32 reg; @@ -2108,8 +2166,6 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) dev_vdbg(dwc->dev, "%s\n", __func__); - memset(¶ms, 0x00, sizeof(params)); - reg = dwc3_readl(dwc->regs, DWC3_DSTS); speed = reg & DWC3_DSTS_CONNECTSPD; dwc->speed = speed; @@ -2156,6 +2212,26 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) break; } + /* Enable USB2 LPM Capability */ + + if ((dwc->revision > DWC3_REVISION_194A) + && (speed != DWC3_DCFG_SUPERSPEED)) { + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg |= DWC3_DCFG_LPM_CAP; + dwc3_writel(dwc->regs, DWC3_DCFG, reg); + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg &= ~(DWC3_DCTL_HIRD_THRES_MASK | DWC3_DCTL_L1_HIBER_EN); + + /* + * TODO: This should be configurable. For now using + * maximum allowed HIRD threshold value of 0b1100 + */ + reg |= DWC3_DCTL_HIRD_THRES(12); + + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + } + /* Recent versions support automatic phy suspend and don't need this */ if (dwc->revision < DWC3_REVISION_194A) { /* Suspend unneeded PHY */ @@ -2374,7 +2450,7 @@ static irqreturn_t dwc3_interrupt(int irq, void *_dwc) * * Returns 0 on success otherwise negative errno. */ -int __devinit dwc3_gadget_init(struct dwc3 *dwc) +int dwc3_gadget_init(struct dwc3 *dwc) { u32 reg; int ret; @@ -2462,20 +2538,8 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc) DWC3_DEVTEN_DISCONNEVTEN); dwc3_writel(dwc->regs, DWC3_DEVTEN, reg); - /* Enable USB2 LPM and automatic phy suspend only on recent versions */ + /* automatic phy suspend only on recent versions */ if (dwc->revision >= DWC3_REVISION_194A) { - reg = dwc3_readl(dwc->regs, DWC3_DCFG); - reg |= DWC3_DCFG_LPM_CAP; - dwc3_writel(dwc->regs, DWC3_DCFG, reg); - - reg = dwc3_readl(dwc->regs, DWC3_DCTL); - reg &= ~(DWC3_DCTL_HIRD_THRES_MASK | DWC3_DCTL_L1_HIBER_EN); - - /* TODO: This should be configurable */ - reg |= DWC3_DCTL_HIRD_THRES(28); - - dwc3_writel(dwc->regs, DWC3_DCTL, reg); - dwc3_gadget_usb2_phy_suspend(dwc, false); dwc3_gadget_usb3_phy_suspend(dwc, false); } diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index 56a62342884..0fa1846eda4 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -44,7 +44,7 @@ int dwc3_host_init(struct dwc3 *dwc) struct platform_device *xhci; int ret; - xhci = platform_device_alloc("xhci-hcd", -1); + xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO); if (!xhci) { dev_err(dwc->dev, "couldn't allocate xHCI device\n"); ret = -ENOMEM; diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index e426ad626d7..5e29ddeb4d3 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -20,6 +20,7 @@ #include <linux/usb/ehci_def.h> #include <linux/delay.h> #include <linux/serial_core.h> +#include <linux/kconfig.h> #include <linux/kgdb.h> #include <linux/kthread.h> #include <asm/io.h> @@ -614,12 +615,6 @@ err: return -ENODEV; } -int dbgp_external_startup(struct usb_hcd *hcd) -{ - return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup(); -} -EXPORT_SYMBOL_GPL(dbgp_external_startup); - static int ehci_reset_port(int port) { u32 portsc; @@ -979,6 +974,7 @@ struct console early_dbgp_console = { .index = -1, }; +#if IS_ENABLED(CONFIG_USB) int dbgp_reset_prep(struct usb_hcd *hcd) { int ret = xen_dbgp_reset_prep(hcd); @@ -1007,6 +1003,13 @@ int dbgp_reset_prep(struct usb_hcd *hcd) } EXPORT_SYMBOL_GPL(dbgp_reset_prep); +int dbgp_external_startup(struct usb_hcd *hcd) +{ + return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup(); +} +EXPORT_SYMBOL_GPL(dbgp_external_startup); +#endif /* USB */ + #ifdef CONFIG_KGDB static char kgdbdbgp_buf[DBGP_MAX_PACKET]; diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index e0ff51b8952..5a0c541daf8 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -281,6 +281,7 @@ config USB_S3C_HSOTG config USB_IMX tristate "Freescale i.MX1 USB Peripheral Controller" depends on ARCH_MXC + depends on BROKEN help Freescale's i.MX1 includes an integrated full speed USB 1.1 device controller. @@ -319,6 +320,7 @@ config USB_S3C_HSUDC config USB_MV_UDC tristate "Marvell USB2.0 Device Controller" + depends on GENERIC_HARDIRQS help Marvell Socs (including PXA and MMP series) include a high speed USB2.0 OTG controller, which can be configured as high speed or @@ -440,7 +442,7 @@ config USB_GOKU config USB_EG20T tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC" - depends on PCI + depends on PCI && GENERIC_HARDIRQS help This is a USB device driver for EG20T PCH. EG20T PCH is the platform controller hub that is used in Intel's @@ -500,6 +502,15 @@ config USB_LIBCOMPOSITE tristate depends on USB_GADGET +config USB_F_ACM + tristate + +config USB_F_SS_LB + tristate + +config USB_U_SERIAL + tristate + choice tristate "USB Gadget Drivers" default USB_ETH @@ -524,6 +535,7 @@ choice config USB_ZERO tristate "Gadget Zero (DEVELOPMENT)" select USB_LIBCOMPOSITE + select USB_F_SS_LB help Gadget Zero is a two-configuration device. It either sinks and sources bulk data; or it loops back a configurable number of @@ -721,31 +733,6 @@ config USB_FUNCTIONFS_GENERIC Include a configuration with the Function Filesystem alone with no Ethernet interface. -config USB_FILE_STORAGE - tristate "File-backed Storage Gadget (DEPRECATED)" - depends on BLOCK - help - The File-backed Storage Gadget acts as a USB Mass Storage - disk drive. As its storage repository it can use a regular - file or a block device (in much the same way as the "loop" - device driver), specified as a module parameter. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "g_file_storage". - - NOTE: This driver is deprecated. Its replacement is the - Mass Storage Gadget. - -config USB_FILE_STORAGE_TEST - bool "File-backed Storage Gadget testing version" - depends on USB_FILE_STORAGE - default n - help - Say "y" to generate the larger testing version of the - File-backed Storage Gadget, useful for probing the - behavior of USB Mass Storage hosts. Not needed for - normal operation. - config USB_MASS_STORAGE tristate "Mass Storage Gadget" depends on BLOCK @@ -756,8 +743,8 @@ config USB_MASS_STORAGE device (in much the same way as the "loop" device driver), specified as a module parameter or sysfs option. - This driver is an updated replacement for the deprecated - File-backed Storage Gadget (g_file_storage). + This driver is a replacement for now removed File-backed + Storage Gadget (g_file_storage). Say "y" to link the driver statically, or "m" to build a dynamically linked module called "g_mass_storage". @@ -775,6 +762,9 @@ config USB_GADGET_TARGET config USB_G_SERIAL tristate "Serial Gadget (with CDC ACM and CDC OBEX support)" + depends on TTY + select USB_U_SERIAL + select USB_F_ACM select USB_LIBCOMPOSITE help The Serial Gadget talks to the Linux-USB generic serial driver. @@ -824,10 +814,14 @@ config USB_G_PRINTER For more information, see Documentation/usb/gadget_printer.txt which includes sample code for accessing the device file. +if TTY + config USB_CDC_COMPOSITE tristate "CDC Composite Device (Ethernet and ACM)" depends on NET select USB_LIBCOMPOSITE + select USB_U_SERIAL + select USB_F_ACM help This driver provides two functions in one configuration: a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link. @@ -843,6 +837,7 @@ config USB_G_NOKIA tristate "Nokia composite gadget" depends on PHONET select USB_LIBCOMPOSITE + select USB_U_SERIAL help The Nokia composite gadget provides support for acm, obex and phonet in only one composite gadget driver. @@ -854,6 +849,8 @@ config USB_G_ACM_MS tristate "CDC Composite Device (ACM and mass storage)" depends on BLOCK select USB_LIBCOMPOSITE + select USB_U_SERIAL + select USB_F_ACM help This driver provides two functions in one configuration: a mass storage, and a CDC ACM (serial port) link. @@ -866,6 +863,8 @@ config USB_G_MULTI depends on BLOCK && NET select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS select USB_LIBCOMPOSITE + select USB_U_SERIAL + select USB_F_ACM help The Multifunction Composite Gadget provides Ethernet (RNDIS and/or CDC Ethernet), mass storage and ACM serial link @@ -904,6 +903,8 @@ config USB_G_MULTI_CDC If unsure, say "y". +endif # TTY + config USB_G_HID tristate "HID Gadget" select USB_LIBCOMPOSITE @@ -920,6 +921,7 @@ config USB_G_HID # Standalone / single function gadgets config USB_G_DBGP tristate "EHCI Debug Device Gadget" + depends on TTY select USB_LIBCOMPOSITE help This gadget emulates an EHCI Debug device. This is useful when you want @@ -941,6 +943,7 @@ config USB_G_DBGP_PRINTK config USB_G_DBGP_SERIAL depends on USB_G_DBGP + select USB_U_SERIAL bool "serial" help Userland can interact using /dev/ttyGSxxx. diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 307be5fa824..82fb2251135 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -6,7 +6,7 @@ ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG obj-$(CONFIG_USB_GADGET) += udc-core.o obj-$(CONFIG_USB_LIBCOMPOSITE) += libcomposite.o libcomposite-y := usbstring.o config.o epautoconf.o -libcomposite-y += composite.o +libcomposite-y += composite.o functions.o obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o obj-$(CONFIG_USB_NET2272) += net2272.o obj-$(CONFIG_USB_NET2280) += net2280.o @@ -35,6 +35,12 @@ mv_udc-y := mv_udc_core.o obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o +# USB Functions +obj-$(CONFIG_USB_F_ACM) += f_acm.o +f_ss_lb-y := f_loopback.o f_sourcesink.o +obj-$(CONFIG_USB_F_SS_LB) += f_ss_lb.o +obj-$(CONFIG_USB_U_SERIAL) += u_serial.o + # # USB gadget drivers # @@ -44,7 +50,6 @@ g_ether-y := ether.o g_serial-y := serial.o g_midi-y := gmidi.o gadgetfs-y := inode.o -g_file_storage-y := file_storage.o g_mass_storage-y := mass_storage.o g_printer-y := printer.o g_cdc-y := cdc2.o @@ -62,7 +67,6 @@ obj-$(CONFIG_USB_AUDIO) += g_audio.o obj-$(CONFIG_USB_ETH) += g_ether.o obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o obj-$(CONFIG_USB_FUNCTIONFS) += g_ffs.o -obj-$(CONFIG_USB_FILE_STORAGE) += g_file_storage.o obj-$(CONFIG_USB_MASS_STORAGE) += g_mass_storage.o obj-$(CONFIG_USB_G_SERIAL) += g_serial.o obj-$(CONFIG_USB_G_PRINTER) += g_printer.o diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c index 5a7f289805f..8f2b0e39153 100644 --- a/drivers/usb/gadget/acm_ms.c +++ b/drivers/usb/gadget/acm_ms.c @@ -40,9 +40,6 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ - -#include "u_serial.c" -#include "f_acm.c" #include "f_mass_storage.c" /*-------------------------------------------------------------------------*/ @@ -112,12 +109,15 @@ FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data); static struct fsg_common fsg_common; /*-------------------------------------------------------------------------*/ - +static unsigned char tty_line; +static struct usb_function *f_acm; +static struct usb_function_instance *f_acm_inst; /* * We _always_ have both ACM and mass storage functions. */ static int __init acm_ms_do_config(struct usb_configuration *c) { + struct f_serial_opts *opts; int status; if (gadget_is_otg(c->cdev->gadget)) { @@ -125,16 +125,35 @@ static int __init acm_ms_do_config(struct usb_configuration *c) c->bmAttributes |= USB_CONFIG_ATT_WAKEUP; } + f_acm_inst = usb_get_function_instance("acm"); + if (IS_ERR(f_acm_inst)) + return PTR_ERR(f_acm_inst); + + opts = container_of(f_acm_inst, struct f_serial_opts, func_inst); + opts->port_num = tty_line; + + f_acm = usb_get_function(f_acm_inst); + if (IS_ERR(f_acm)) { + status = PTR_ERR(f_acm); + goto err_func; + } - status = acm_bind_config(c, 0); + status = usb_add_function(c, f_acm); if (status < 0) - return status; + goto err_conf; status = fsg_bind_config(c->cdev, c, &fsg_common); if (status < 0) - return status; + goto err_fsg; return 0; +err_fsg: + usb_remove_function(c, f_acm); +err_conf: + usb_put_function(f_acm); +err_func: + usb_put_function_instance(f_acm_inst); + return status; } static struct usb_configuration acm_ms_config_driver = { @@ -153,7 +172,7 @@ static int __init acm_ms_bind(struct usb_composite_dev *cdev) void *retp; /* set up serial link layer */ - status = gserial_setup(cdev->gadget, 1); + status = gserial_alloc_line(&tty_line); if (status < 0) return status; @@ -189,14 +208,15 @@ static int __init acm_ms_bind(struct usb_composite_dev *cdev) fail1: fsg_common_put(&fsg_common); fail0: - gserial_cleanup(); + gserial_free_line(tty_line); return status; } static int __exit acm_ms_unbind(struct usb_composite_dev *cdev) { - gserial_cleanup(); - + usb_put_function(f_acm); + usb_put_function_instance(f_acm_inst); + gserial_free_line(tty_line); return 0; } diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index fc0ec5e0d58..75973f33a4c 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -1400,15 +1400,16 @@ static int udc_wakeup(struct usb_gadget *gadget) return 0; } -static int amd5536_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); -static int amd5536_stop(struct usb_gadget_driver *driver); +static int amd5536_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver); +static int amd5536_udc_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver); /* gadget operations */ static const struct usb_gadget_ops udc_ops = { .wakeup = udc_wakeup, .get_frame = udc_get_frame, - .start = amd5536_start, - .stop = amd5536_stop, + .udc_start = amd5536_udc_start, + .udc_stop = amd5536_udc_stop, }; /* Setups endpoint parameters, adds endpoints to linked list */ @@ -1913,41 +1914,22 @@ static int setup_ep0(struct udc *dev) } /* Called by gadget driver to register itself */ -static int amd5536_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) +static int amd5536_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) { - struct udc *dev = udc; - int retval; + struct udc *dev = to_amd5536_udc(g); u32 tmp; - if (!driver || !bind || !driver->setup - || driver->max_speed < USB_SPEED_HIGH) - return -EINVAL; - if (!dev) - return -ENODEV; - if (dev->driver) - return -EBUSY; - driver->driver.bus = NULL; dev->driver = driver; dev->gadget.dev.driver = &driver->driver; - retval = bind(&dev->gadget, driver); - /* Some gadget drivers use both ep0 directions. * NOTE: to gadget driver, ep0 is just one endpoint... */ dev->ep[UDC_EP0OUT_IX].ep.driver_data = dev->ep[UDC_EP0IN_IX].ep.driver_data; - if (retval) { - DBG(dev, "binding to %s returning %d\n", - driver->driver.name, retval); - dev->driver = NULL; - dev->gadget.dev.driver = NULL; - return retval; - } - /* get ready for ep0 traffic */ setup_ep0(dev); @@ -1969,14 +1951,9 @@ __acquires(dev->lock) { int tmp; - if (dev->gadget.speed != USB_SPEED_UNKNOWN) { - spin_unlock(&dev->lock); - driver->disconnect(&dev->gadget); - spin_lock(&dev->lock); - } - /* empty queues and init hardware */ udc_basic_init(dev); + for (tmp = 0; tmp < UDC_EP_NUM; tmp++) empty_req_queue(&dev->ep[tmp]); @@ -1984,23 +1961,18 @@ __acquires(dev->lock) } /* Called by gadget driver to unregister itself */ -static int amd5536_stop(struct usb_gadget_driver *driver) +static int amd5536_udc_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver) { - struct udc *dev = udc; - unsigned long flags; + struct udc *dev = to_amd5536_udc(g); + unsigned long flags; u32 tmp; - if (!dev) - return -ENODEV; - if (!driver || driver != dev->driver || !driver->unbind) - return -EINVAL; - spin_lock_irqsave(&dev->lock, flags); udc_mask_unused_interrupts(dev); shutdown(dev, driver); spin_unlock_irqrestore(&dev->lock, flags); - driver->unbind(&dev->gadget); dev->gadget.dev.driver = NULL; dev->driver = NULL; @@ -2009,9 +1981,6 @@ static int amd5536_stop(struct usb_gadget_driver *driver) tmp |= AMD_BIT(UDC_DEVCTL_SD); writel(tmp, &dev->regs->ctl); - - DBG(dev, "%s: unregistered\n", driver->driver.name); - return 0; } @@ -3231,7 +3200,7 @@ static int udc_pci_probe( } if (!pdev->irq) { - dev_err(&dev->pdev->dev, "irq not set\n"); + dev_err(&pdev->dev, "irq not set\n"); kfree(dev); dev = NULL; retval = -ENODEV; @@ -3250,7 +3219,7 @@ static int udc_pci_probe( dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR); if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) { - dev_dbg(&dev->pdev->dev, "request_irq(%d) fail\n", pdev->irq); + dev_dbg(&pdev->dev, "request_irq(%d) fail\n", pdev->irq); kfree(dev); dev = NULL; retval = -EBUSY; diff --git a/drivers/usb/gadget/amd5536udc.h b/drivers/usb/gadget/amd5536udc.h index 14af87d65ca..f1bf32e6b8d 100644 --- a/drivers/usb/gadget/amd5536udc.h +++ b/drivers/usb/gadget/amd5536udc.h @@ -563,6 +563,8 @@ struct udc { u16 cur_alt; }; +#define to_amd5536_udc(g) (container_of((g), struct udc, gadget)) + /* setup request data */ union udc_setup_data { u32 data[2]; diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 89d90b5fb78..45dd2929a67 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -31,6 +31,7 @@ #include <linux/usb/gadget.h> #include <linux/of.h> #include <linux/of_gpio.h> +#include <linux/platform_data/atmel.h> #include <asm/byteorder.h> #include <mach/hardware.h> @@ -38,7 +39,6 @@ #include <asm/irq.h> #include <asm/gpio.h> -#include <mach/board.h> #include <mach/cpu.h> #include <mach/at91sam9261_matrix.h> #include <mach/at91_matrix.h> @@ -51,7 +51,7 @@ * full speed USB controllers, including the at91rm9200 (arm920T, with MMU), * at91sam926x (arm926ejs, with MMU), and several no-mmu versions. * - * This driver expects the board has been wired with two GPIOs suppporting + * This driver expects the board has been wired with two GPIOs supporting * a VBUS sensing IRQ, and a D+ pullup. (They may be omitted, but the * testing hasn't covered such cases.) * @@ -1621,8 +1621,7 @@ static void at91_vbus_timer(unsigned long data) * bus such as i2c or spi which may sleep, so schedule some work * to read the vbus gpio */ - if (!work_pending(&udc->vbus_timer_work)) - schedule_work(&udc->vbus_timer_work); + schedule_work(&udc->vbus_timer_work); } static int at91_start(struct usb_gadget *gadget, @@ -1673,7 +1672,7 @@ static void at91udc_shutdown(struct platform_device *dev) spin_unlock_irqrestore(&udc->lock, flags); } -static void __devinit at91udc_of_init(struct at91_udc *udc, +static void at91udc_of_init(struct at91_udc *udc, struct device_node *np) { struct at91_udc_data *board = &udc->board; @@ -1693,7 +1692,7 @@ static void __devinit at91udc_of_init(struct at91_udc *udc, board->pullup_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0; } -static int __devinit at91udc_probe(struct platform_device *pdev) +static int at91udc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct at91_udc *udc; @@ -1739,7 +1738,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev) /* rm9200 needs manual D+ pullup; off by default */ if (cpu_is_at91rm9200()) { - if (gpio_is_valid(udc->board.pullup_pin)) { + if (!gpio_is_valid(udc->board.pullup_pin)) { DBG("no D+ pullup?\n"); retval = -ENODEV; goto fail0; @@ -1982,17 +1981,7 @@ static struct platform_driver at91_udc_driver = { }, }; -static int __init udc_init_module(void) -{ - return platform_driver_probe(&at91_udc_driver, at91udc_probe); -} -module_init(udc_init_module); - -static void __exit udc_exit_module(void) -{ - platform_driver_unregister(&at91_udc_driver); -} -module_exit(udc_exit_module); +module_platform_driver_probe(at91_udc_driver, at91udc_probe); MODULE_DESCRIPTION("AT91 udc driver"); MODULE_AUTHOR("Thomas Rathbone, David Brownell"); diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 9a9bced813e..b66130c9726 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -21,9 +21,9 @@ #include <linux/usb/gadget.h> #include <linux/usb/atmel_usba_udc.h> #include <linux/delay.h> +#include <linux/platform_data/atmel.h> #include <asm/gpio.h> -#include <mach/board.h> #include "atmel_usba_udc.h" @@ -93,7 +93,7 @@ static ssize_t queue_dbg_read(struct file *file, char __user *buf, if (!access_ok(VERIFY_WRITE, buf, nbytes)) return -EFAULT; - mutex_lock(&file->f_dentry->d_inode->i_mutex); + mutex_lock(&file_inode(file)->i_mutex); list_for_each_entry_safe(req, tmp_req, queue, queue) { len = snprintf(tmpbuf, sizeof(tmpbuf), "%8p %08x %c%c%c %5d %c%c%c\n", @@ -120,7 +120,7 @@ static ssize_t queue_dbg_read(struct file *file, char __user *buf, nbytes -= len; buf += len; } - mutex_unlock(&file->f_dentry->d_inode->i_mutex); + mutex_unlock(&file_inode(file)->i_mutex); return actual; } @@ -168,13 +168,13 @@ out: static ssize_t regs_dbg_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos) { - struct inode *inode = file->f_dentry->d_inode; + struct inode *inode = file_inode(file); int ret; mutex_lock(&inode->i_mutex); ret = simple_read_from_buffer(buf, nbytes, ppos, file->private_data, - file->f_dentry->d_inode->i_size); + file_inode(file)->i_size); mutex_unlock(&inode->i_mutex); return ret; @@ -2066,17 +2066,7 @@ static struct platform_driver udc_driver = { }, }; -static int __init udc_init(void) -{ - return platform_driver_probe(&udc_driver, usba_udc_probe); -} -module_init(udc_init); - -static void __exit udc_exit(void) -{ - platform_driver_unregister(&udc_driver); -} -module_exit(udc_exit); +module_platform_driver_probe(udc_driver, usba_udc_probe); MODULE_DESCRIPTION("Atmel USBA UDC driver"); MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c index 9ca792224cd..8cc8253f110 100644 --- a/drivers/usb/gadget/bcm63xx_udc.c +++ b/drivers/usb/gadget/bcm63xx_udc.c @@ -2323,7 +2323,7 @@ static void bcm63xx_udc_gadget_release(struct device *dev) * Note that platform data is required, because pd.port_no varies from chip * to chip and is used to switch the correct USB port to device mode. */ -static int __devinit bcm63xx_udc_probe(struct platform_device *pdev) +static int bcm63xx_udc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct bcm63xx_usbd_platform_data *pd = dev->platform_data; @@ -2351,19 +2351,20 @@ static int __devinit bcm63xx_udc_probe(struct platform_device *pdev) dev_err(dev, "error finding USBD resource\n"); return -ENXIO; } - udc->usbd_regs = devm_request_and_ioremap(dev, res); + + udc->usbd_regs = devm_ioremap_resource(dev, res); + if (IS_ERR(udc->usbd_regs)) + return PTR_ERR(udc->usbd_regs); res = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (!res) { dev_err(dev, "error finding IUDMA resource\n"); return -ENXIO; } - udc->iudma_regs = devm_request_and_ioremap(dev, res); - if (!udc->usbd_regs || !udc->iudma_regs) { - dev_err(dev, "error requesting resources\n"); - return -ENXIO; - } + udc->iudma_regs = devm_ioremap_resource(dev, res); + if (IS_ERR(udc->iudma_regs)) + return PTR_ERR(udc->iudma_regs); spin_lock_init(&udc->lock); INIT_WORK(&udc->ep0_wq, bcm63xx_ep0_process); @@ -2433,7 +2434,7 @@ out_uninit: * bcm63xx_udc_remove - Remove the device from the system. * @pdev: Platform device struct from the bcm63xx BSP code. */ -static int __devexit bcm63xx_udc_remove(struct platform_device *pdev) +static int bcm63xx_udc_remove(struct platform_device *pdev) { struct bcm63xx_udc *udc = platform_get_drvdata(pdev); @@ -2450,7 +2451,7 @@ static int __devexit bcm63xx_udc_remove(struct platform_device *pdev) static struct platform_driver bcm63xx_udc_driver = { .probe = bcm63xx_udc_probe, - .remove = __devexit_p(bcm63xx_udc_remove), + .remove = bcm63xx_udc_remove, .driver = { .name = DRV_MODULE_NAME, .owner = THIS_MODULE, diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c index 1e4bb77f00b..a7d6f702675 100644 --- a/drivers/usb/gadget/cdc2.c +++ b/drivers/usb/gadget/cdc2.c @@ -42,9 +42,6 @@ USB_GADGET_COMPOSITE_OPTIONS(); * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ - -#include "u_serial.c" -#include "f_acm.c" #include "f_ecm.c" #include "u_ether.c" @@ -108,12 +105,16 @@ static struct usb_gadget_strings *dev_strings[] = { static u8 hostaddr[ETH_ALEN]; /*-------------------------------------------------------------------------*/ +static struct usb_function *f_acm; +static struct usb_function_instance *fi_serial; +static unsigned char tty_line; /* * We _always_ have both CDC ECM and CDC ACM functions. */ static int __init cdc_do_config(struct usb_configuration *c) { + struct f_serial_opts *opts; int status; if (gadget_is_otg(c->cdev->gadget)) { @@ -125,11 +126,26 @@ static int __init cdc_do_config(struct usb_configuration *c) if (status < 0) return status; - status = acm_bind_config(c, 0); - if (status < 0) - return status; + fi_serial = usb_get_function_instance("acm"); + if (IS_ERR(fi_serial)) + return PTR_ERR(fi_serial); + opts = container_of(fi_serial, struct f_serial_opts, func_inst); + opts->port_num = tty_line; + + f_acm = usb_get_function(fi_serial); + if (IS_ERR(f_acm)) + goto err_func_acm; + + status = usb_add_function(c, f_acm); + if (status) + goto err_conf; return 0; +err_conf: + usb_put_function(f_acm); +err_func_acm: + usb_put_function_instance(fi_serial); + return status; } static struct usb_configuration cdc_config_driver = { @@ -158,7 +174,7 @@ static int __init cdc_bind(struct usb_composite_dev *cdev) return status; /* set up serial link layer */ - status = gserial_setup(cdev->gadget, 1); + status = gserial_alloc_line(&tty_line); if (status < 0) goto fail0; @@ -184,7 +200,7 @@ static int __init cdc_bind(struct usb_composite_dev *cdev) return 0; fail1: - gserial_cleanup(); + gserial_free_line(tty_line); fail0: gether_cleanup(); return status; @@ -192,7 +208,9 @@ fail0: static int __exit cdc_unbind(struct usb_composite_dev *cdev) { - gserial_cleanup(); + usb_put_function(f_acm); + usb_put_function_instance(fi_serial); + gserial_free_line(tty_line); gether_cleanup(); return 0; } diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 957f973dd96..c0d62b27861 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -28,6 +28,12 @@ * with the relevant device-wide data. */ +static struct usb_gadget_strings **get_containers_gs( + struct usb_gadget_string_container *uc) +{ + return (struct usb_gadget_strings **)uc->stash; +} + /** * next_ep_desc() - advance to the next EP descriptor * @t: currect pointer within descriptor array @@ -107,7 +113,7 @@ int config_ep_by_speed(struct usb_gadget *g, } /* else: fall through */ default: - speed_desc = f->descriptors; + speed_desc = f->fs_descriptors; } /* find descriptors */ for_each_ep_desc(speed_desc, d_spd) { @@ -200,7 +206,7 @@ int usb_add_function(struct usb_configuration *config, * as full speed ... it's the function drivers that will need * to avoid bulk and ISO transfers. */ - if (!config->fullspeed && function->descriptors) + if (!config->fullspeed && function->fs_descriptors) config->fullspeed = true; if (!config->highspeed && function->hs_descriptors) config->highspeed = true; @@ -215,6 +221,18 @@ done: } EXPORT_SYMBOL_GPL(usb_add_function); +void usb_remove_function(struct usb_configuration *c, struct usb_function *f) +{ + if (f->disable) + f->disable(f); + + bitmap_zero(f->endpoints, 32); + list_del(&f->list); + if (f->unbind) + f->unbind(c, f); +} +EXPORT_SYMBOL_GPL(usb_remove_function); + /** * usb_function_deactivate - prevent function and gadget enumeration * @function: the function that isn't yet ready to respond @@ -320,6 +338,25 @@ int usb_interface_id(struct usb_configuration *config, } EXPORT_SYMBOL_GPL(usb_interface_id); +static u8 encode_bMaxPower(enum usb_device_speed speed, + struct usb_configuration *c) +{ + unsigned val; + + if (c->MaxPower) + val = c->MaxPower; + else + val = CONFIG_USB_GADGET_VBUS_DRAW; + if (!val) + return 0; + switch (speed) { + case USB_SPEED_SUPER: + return DIV_ROUND_UP(val, 8); + default: + return DIV_ROUND_UP(val, 2); + }; +} + static int config_buf(struct usb_configuration *config, enum usb_device_speed speed, void *buf, u8 type) { @@ -339,7 +376,7 @@ static int config_buf(struct usb_configuration *config, c->bConfigurationValue = config->bConfigurationValue; c->iConfiguration = config->iConfiguration; c->bmAttributes = USB_CONFIG_ATT_ONE | config->bmAttributes; - c->bMaxPower = config->bMaxPower ? : (CONFIG_USB_GADGET_VBUS_DRAW / 2); + c->bMaxPower = encode_bMaxPower(speed, config); /* There may be e.g. OTG descriptors */ if (config->descriptors) { @@ -363,7 +400,7 @@ static int config_buf(struct usb_configuration *config, descriptors = f->hs_descriptors; break; default: - descriptors = f->descriptors; + descriptors = f->fs_descriptors; } if (!descriptors) @@ -620,7 +657,7 @@ static int set_config(struct usb_composite_dev *cdev, descriptors = f->hs_descriptors; break; default: - descriptors = f->descriptors; + descriptors = f->fs_descriptors; } for (; *descriptors; ++descriptors) { @@ -656,7 +693,7 @@ static int set_config(struct usb_composite_dev *cdev, } /* when we return, be sure our power usage is valid */ - power = c->bMaxPower ? (2 * c->bMaxPower) : CONFIG_USB_GADGET_VBUS_DRAW; + power = c->MaxPower ? c->MaxPower : CONFIG_USB_GADGET_VBUS_DRAW; done: usb_gadget_vbus_draw(gadget, power); if (result >= 0 && cdev->delayed_status) @@ -664,6 +701,31 @@ done: return result; } +int usb_add_config_only(struct usb_composite_dev *cdev, + struct usb_configuration *config) +{ + struct usb_configuration *c; + + if (!config->bConfigurationValue) + return -EINVAL; + + /* Prevent duplicate configuration identifiers */ + list_for_each_entry(c, &cdev->configs, list) { + if (c->bConfigurationValue == config->bConfigurationValue) + return -EBUSY; + } + + config->cdev = cdev; + list_add_tail(&config->list, &cdev->configs); + + INIT_LIST_HEAD(&config->functions); + config->next_interface_id = 0; + memset(config->interface, 0, sizeof(config->interface)); + + return 0; +} +EXPORT_SYMBOL_GPL(usb_add_config_only); + /** * usb_add_config() - add a configuration to a device. * @cdev: wraps the USB gadget @@ -684,30 +746,18 @@ int usb_add_config(struct usb_composite_dev *cdev, int (*bind)(struct usb_configuration *)) { int status = -EINVAL; - struct usb_configuration *c; + + if (!bind) + goto done; DBG(cdev, "adding config #%u '%s'/%p\n", config->bConfigurationValue, config->label, config); - if (!config->bConfigurationValue || !bind) + status = usb_add_config_only(cdev, config); + if (status) goto done; - /* Prevent duplicate configuration identifiers */ - list_for_each_entry(c, &cdev->configs, list) { - if (c->bConfigurationValue == config->bConfigurationValue) { - status = -EBUSY; - goto done; - } - } - - config->cdev = cdev; - list_add_tail(&config->list, &cdev->configs); - - INIT_LIST_HEAD(&config->functions); - config->next_interface_id = 0; - memset(config->interface, 0, sizeof(config->interface)); - status = bind(config); if (status < 0) { while (!list_empty(&config->functions)) { @@ -860,6 +910,7 @@ static int get_string(struct usb_composite_dev *cdev, void *buf, u16 language, int id) { struct usb_composite_driver *composite = cdev->driver; + struct usb_gadget_string_container *uc; struct usb_configuration *c; struct usb_function *f; int len; @@ -892,6 +943,12 @@ static int get_string(struct usb_composite_dev *cdev, collect_langs(sp, s->wData); } } + list_for_each_entry(uc, &cdev->gstrings, list) { + struct usb_gadget_strings **sp; + + sp = get_containers_gs(uc); + collect_langs(sp, s->wData); + } for (len = 0; len <= 126 && s->wData[len]; len++) continue; @@ -902,6 +959,15 @@ static int get_string(struct usb_composite_dev *cdev, return s->bLength; } + list_for_each_entry(uc, &cdev->gstrings, list) { + struct usb_gadget_strings **sp; + + sp = get_containers_gs(uc); + len = lookup_string(sp, buf, language, id); + if (len > 0) + return len; + } + /* String IDs are device-scoped, so we look up each string * table we're told about. These lookups are infrequent; * simpler-is-better here. @@ -987,6 +1053,119 @@ int usb_string_ids_tab(struct usb_composite_dev *cdev, struct usb_string *str) } EXPORT_SYMBOL_GPL(usb_string_ids_tab); +static struct usb_gadget_string_container *copy_gadget_strings( + struct usb_gadget_strings **sp, unsigned n_gstrings, + unsigned n_strings) +{ + struct usb_gadget_string_container *uc; + struct usb_gadget_strings **gs_array; + struct usb_gadget_strings *gs; + struct usb_string *s; + unsigned mem; + unsigned n_gs; + unsigned n_s; + void *stash; + + mem = sizeof(*uc); + mem += sizeof(void *) * (n_gstrings + 1); + mem += sizeof(struct usb_gadget_strings) * n_gstrings; + mem += sizeof(struct usb_string) * (n_strings + 1) * (n_gstrings); + uc = kmalloc(mem, GFP_KERNEL); + if (!uc) + return ERR_PTR(-ENOMEM); + gs_array = get_containers_gs(uc); + stash = uc->stash; + stash += sizeof(void *) * (n_gstrings + 1); + for (n_gs = 0; n_gs < n_gstrings; n_gs++) { + struct usb_string *org_s; + + gs_array[n_gs] = stash; + gs = gs_array[n_gs]; + stash += sizeof(struct usb_gadget_strings); + gs->language = sp[n_gs]->language; + gs->strings = stash; + org_s = sp[n_gs]->strings; + + for (n_s = 0; n_s < n_strings; n_s++) { + s = stash; + stash += sizeof(struct usb_string); + if (org_s->s) + s->s = org_s->s; + else + s->s = ""; + org_s++; + } + s = stash; + s->s = NULL; + stash += sizeof(struct usb_string); + + } + gs_array[n_gs] = NULL; + return uc; +} + +/** + * usb_gstrings_attach() - attach gadget strings to a cdev and assign ids + * @cdev: the device whose string descriptor IDs are being allocated + * and attached. + * @sp: an array of usb_gadget_strings to attach. + * @n_strings: number of entries in each usb_strings array (sp[]->strings) + * + * This function will create a deep copy of usb_gadget_strings and usb_string + * and attach it to the cdev. The actual string (usb_string.s) will not be + * copied but only a referenced will be made. The struct usb_gadget_strings + * array may contain multiple languges and should be NULL terminated. + * The ->language pointer of each struct usb_gadget_strings has to contain the + * same amount of entries. + * For instance: sp[0] is en-US, sp[1] is es-ES. It is expected that the first + * usb_string entry of es-ES containts the translation of the first usb_string + * entry of en-US. Therefore both entries become the same id assign. + */ +struct usb_string *usb_gstrings_attach(struct usb_composite_dev *cdev, + struct usb_gadget_strings **sp, unsigned n_strings) +{ + struct usb_gadget_string_container *uc; + struct usb_gadget_strings **n_gs; + unsigned n_gstrings = 0; + unsigned i; + int ret; + + for (i = 0; sp[i]; i++) + n_gstrings++; + + if (!n_gstrings) + return ERR_PTR(-EINVAL); + + uc = copy_gadget_strings(sp, n_gstrings, n_strings); + if (IS_ERR(uc)) + return ERR_PTR(PTR_ERR(uc)); + + n_gs = get_containers_gs(uc); + ret = usb_string_ids_tab(cdev, n_gs[0]->strings); + if (ret) + goto err; + + for (i = 1; i < n_gstrings; i++) { + struct usb_string *m_s; + struct usb_string *s; + unsigned n; + + m_s = n_gs[0]->strings; + s = n_gs[i]->strings; + for (n = 0; n < n_strings; n++) { + s->id = m_s->id; + s++; + m_s++; + } + } + list_add_tail(&uc->list, &cdev->gstrings); + return n_gs[0]->strings; +err: + kfree(uc); + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(usb_gstrings_attach); + /** * usb_string_ids_n() - allocate unused string IDs in batch * @c: the device whose string descriptor IDs are being allocated @@ -1033,7 +1212,7 @@ static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req) * housekeeping for the gadget function we're implementing. Most of * the work is in config and function specific setup. */ -static int +int composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) { struct usb_composite_dev *cdev = get_gadget_data(gadget); @@ -1300,7 +1479,7 @@ done: return value; } -static void composite_disconnect(struct usb_gadget *gadget) +void composite_disconnect(struct usb_gadget *gadget) { struct usb_composite_dev *cdev = get_gadget_data(gadget); unsigned long flags; @@ -1330,8 +1509,7 @@ static ssize_t composite_show_suspended(struct device *dev, static DEVICE_ATTR(suspended, 0444, composite_show_suspended, NULL); -static void -composite_unbind(struct usb_gadget *gadget) +static void __composite_unbind(struct usb_gadget *gadget, bool unbind_driver) { struct usb_composite_dev *cdev = get_gadget_data(gadget); @@ -1348,19 +1526,21 @@ composite_unbind(struct usb_gadget *gadget) struct usb_configuration, list); remove_config(cdev, c); } - if (cdev->driver->unbind) + if (cdev->driver->unbind && unbind_driver) cdev->driver->unbind(cdev); - if (cdev->req) { - kfree(cdev->req->buf); - usb_ep_free_request(gadget->ep0, cdev->req); - } - device_remove_file(&gadget->dev, &dev_attr_suspended); + composite_dev_cleanup(cdev); + kfree(cdev->def_manufacturer); kfree(cdev); set_gadget_data(gadget, NULL); } +static void composite_unbind(struct usb_gadget *gadget) +{ + __composite_unbind(gadget, true); +} + static void update_unchanged_dev_desc(struct usb_device_descriptor *new, const struct usb_device_descriptor *old) { @@ -1399,34 +1579,25 @@ static void update_unchanged_dev_desc(struct usb_device_descriptor *new, new->iProduct = iProduct; } -static struct usb_composite_driver *to_cdriver(struct usb_gadget_driver *gdrv) +int composite_dev_prepare(struct usb_composite_driver *composite, + struct usb_composite_dev *cdev) { - return container_of(gdrv, struct usb_composite_driver, gadget_driver); -} - -static int composite_bind(struct usb_gadget *gadget, - struct usb_gadget_driver *gdriver) -{ - struct usb_composite_dev *cdev; - struct usb_composite_driver *composite = to_cdriver(gdriver); - int status = -ENOMEM; - - cdev = kzalloc(sizeof *cdev, GFP_KERNEL); - if (!cdev) - return status; - - spin_lock_init(&cdev->lock); - cdev->gadget = gadget; - set_gadget_data(gadget, cdev); - INIT_LIST_HEAD(&cdev->configs); + struct usb_gadget *gadget = cdev->gadget; + int ret = -ENOMEM; /* preallocate control response and buffer */ cdev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL); if (!cdev->req) - goto fail; + return -ENOMEM; + cdev->req->buf = kmalloc(USB_COMP_EP0_BUFSIZ, GFP_KERNEL); if (!cdev->req->buf) goto fail; + + ret = device_create_file(&gadget->dev, &dev_attr_suspended); + if (ret) + goto fail_dev; + cdev->req->complete = composite_setup_complete; gadget->ep0->driver_data = cdev; @@ -1444,7 +1615,51 @@ static int composite_bind(struct usb_gadget *gadget, * we force endpoints to start unassigned; few controller * drivers will zero ep->driver_data. */ - usb_ep_autoconfig_reset(cdev->gadget); + usb_ep_autoconfig_reset(gadget); + return 0; +fail_dev: + kfree(cdev->req->buf); +fail: + usb_ep_free_request(gadget->ep0, cdev->req); + cdev->req = NULL; + return ret; +} + +void composite_dev_cleanup(struct usb_composite_dev *cdev) +{ + struct usb_gadget_string_container *uc, *tmp; + + list_for_each_entry_safe(uc, tmp, &cdev->gstrings, list) { + list_del(&uc->list); + kfree(uc); + } + if (cdev->req) { + kfree(cdev->req->buf); + usb_ep_free_request(cdev->gadget->ep0, cdev->req); + } + device_remove_file(&cdev->gadget->dev, &dev_attr_suspended); +} + +static int composite_bind(struct usb_gadget *gadget, + struct usb_gadget_driver *gdriver) +{ + struct usb_composite_dev *cdev; + struct usb_composite_driver *composite = to_cdriver(gdriver); + int status = -ENOMEM; + + cdev = kzalloc(sizeof *cdev, GFP_KERNEL); + if (!cdev) + return status; + + spin_lock_init(&cdev->lock); + cdev->gadget = gadget; + set_gadget_data(gadget, cdev); + INIT_LIST_HEAD(&cdev->configs); + INIT_LIST_HEAD(&cdev->gstrings); + + status = composite_dev_prepare(composite, cdev); + if (status) + goto fail; /* composite gadget needs to assign strings for whole device (like * serial number), register function drivers, potentially update @@ -1460,16 +1675,11 @@ static int composite_bind(struct usb_gadget *gadget, if (composite->needs_serial && !cdev->desc.iSerialNumber) WARNING(cdev, "userspace failed to provide iSerialNumber\n"); - /* finish up */ - status = device_create_file(&gadget->dev, &dev_attr_suspended); - if (status) - goto fail; - INFO(cdev, "%s ready\n", composite->name); return 0; fail: - composite_unbind(gadget); + __composite_unbind(gadget, false); return status; } @@ -1518,10 +1728,10 @@ composite_resume(struct usb_gadget *gadget) f->resume(f); } - maxpower = cdev->config->bMaxPower; + maxpower = cdev->config->MaxPower; usb_gadget_vbus_draw(gadget, maxpower ? - (2 * maxpower) : CONFIG_USB_GADGET_VBUS_DRAW); + maxpower : CONFIG_USB_GADGET_VBUS_DRAW); } cdev->suspended = 0; @@ -1547,10 +1757,7 @@ static const struct usb_gadget_driver composite_driver_template = { /** * usb_composite_probe() - register a composite driver * @driver: the driver to register - * @bind: the callback used to allocate resources that are shared across the - * whole device, such as string IDs, and add its configurations using - * @usb_add_config(). This may fail by returning a negative errno - * value; it should return zero on successful initialization. + * * Context: single threaded during gadget setup * * This function is used to register drivers using the composite driver diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c index e3a98929d34..34e12fc52c2 100644 --- a/drivers/usb/gadget/config.c +++ b/drivers/usb/gadget/config.c @@ -19,7 +19,7 @@ #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> - +#include <linux/usb/composite.h> /** * usb_descriptor_fillbuf - fill buffer with descriptors @@ -158,3 +158,40 @@ usb_copy_descriptors(struct usb_descriptor_header **src) return ret; } EXPORT_SYMBOL_GPL(usb_copy_descriptors); + +int usb_assign_descriptors(struct usb_function *f, + struct usb_descriptor_header **fs, + struct usb_descriptor_header **hs, + struct usb_descriptor_header **ss) +{ + struct usb_gadget *g = f->config->cdev->gadget; + + if (fs) { + f->fs_descriptors = usb_copy_descriptors(fs); + if (!f->fs_descriptors) + goto err; + } + if (hs && gadget_is_dualspeed(g)) { + f->hs_descriptors = usb_copy_descriptors(hs); + if (!f->hs_descriptors) + goto err; + } + if (ss && gadget_is_superspeed(g)) { + f->ss_descriptors = usb_copy_descriptors(ss); + if (!f->ss_descriptors) + goto err; + } + return 0; +err: + usb_free_all_descriptors(f); + return -ENOMEM; +} +EXPORT_SYMBOL_GPL(usb_assign_descriptors); + +void usb_free_all_descriptors(struct usb_function *f) +{ + usb_free_descriptors(f->fs_descriptors); + usb_free_descriptors(f->hs_descriptors); + usb_free_descriptors(f->ss_descriptors); +} +EXPORT_SYMBOL_GPL(usb_free_all_descriptors); diff --git a/drivers/usb/gadget/dbgp.c b/drivers/usb/gadget/dbgp.c index 87d16502816..986fc511a2e 100644 --- a/drivers/usb/gadget/dbgp.c +++ b/drivers/usb/gadget/dbgp.c @@ -13,9 +13,7 @@ #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> -#ifdef CONFIG_USB_G_DBGP_SERIAL -#include "u_serial.c" -#endif +#include "u_serial.h" #define DRIVER_VENDOR_ID 0x0525 /* NetChip */ #define DRIVER_PRODUCT_ID 0xc0de /* undefined */ @@ -233,6 +231,10 @@ static void dbgp_unbind(struct usb_gadget *gadget) gadget->ep0->driver_data = NULL; } +#ifdef CONFIG_USB_G_DBGP_SERIAL +static unsigned char tty_line; +#endif + static int __init dbgp_configure_endpoints(struct usb_gadget *gadget) { int stp; @@ -270,7 +272,7 @@ static int __init dbgp_configure_endpoints(struct usb_gadget *gadget) dbgp.serial->in->desc = &i_desc; dbgp.serial->out->desc = &o_desc; - if (gserial_setup(gadget, 1) < 0) { + if (gserial_alloc_line(&tty_line)) { stp = 3; goto fail_3; } @@ -379,7 +381,7 @@ static int dbgp_setup(struct usb_gadget *gadget, #ifdef CONFIG_USB_G_DBGP_PRINTK err = dbgp_enable_ep(); #else - err = gserial_connect(dbgp.serial, 0); + err = gserial_connect(dbgp.serial, tty_line); #endif if (err < 0) goto fail; @@ -422,7 +424,7 @@ static void __exit dbgp_exit(void) { usb_gadget_unregister_driver(&dbgp_driver); #ifdef CONFIG_USB_G_DBGP_SERIAL - gserial_cleanup(); + gserial_free_line(tty_line); #endif } diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 0f7541be28f..8cf0c0f6fa1 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -63,16 +63,20 @@ MODULE_LICENSE("GPL"); struct dummy_hcd_module_parameters { bool is_super_speed; bool is_high_speed; + unsigned int num; }; static struct dummy_hcd_module_parameters mod_data = { .is_super_speed = false, .is_high_speed = true, + .num = 1, }; module_param_named(is_super_speed, mod_data.is_super_speed, bool, S_IRUGO); MODULE_PARM_DESC(is_super_speed, "true to simulate SuperSpeed connection"); module_param_named(is_high_speed, mod_data.is_high_speed, bool, S_IRUGO); MODULE_PARM_DESC(is_high_speed, "true to simulate HighSpeed connection"); +module_param_named(num, mod_data.num, uint, S_IRUGO); +MODULE_PARM_DESC(num, "number of emulated controllers"); /*-------------------------------------------------------------------------*/ /* gadget side driver data structres */ @@ -126,10 +130,7 @@ static const char ep0name[] = "ep0"; static const char *const ep_name[] = { ep0name, /* everyone has ep0 */ - /* act like a net2280: high speed, six configurable endpoints */ - "ep-a", "ep-b", "ep-c", "ep-d", "ep-e", "ep-f", - - /* or like pxa250: fifteen fixed function endpoints */ + /* act like a pxa250: fifteen fixed function endpoints */ "ep1in-bulk", "ep2out-bulk", "ep3in-iso", "ep4out-iso", "ep5in-int", "ep6in-bulk", "ep7out-bulk", "ep8in-iso", "ep9out-iso", "ep10in-int", "ep11in-bulk", "ep12out-bulk", "ep13in-iso", "ep14out-iso", @@ -137,6 +138,10 @@ static const char *const ep_name[] = { /* or like sa1100: two fixed function endpoints */ "ep1out-bulk", "ep2in-bulk", + + /* and now some generic EPs so we have enough in multi config */ + "ep3out", "ep4in", "ep5out", "ep6out", "ep7in", "ep8out", "ep9in", + "ep10out", "ep11out", "ep12in", "ep13out", "ep14in", "ep15out", }; #define DUMMY_ENDPOINTS ARRAY_SIZE(ep_name) @@ -238,8 +243,6 @@ static inline struct dummy *gadget_dev_to_dummy(struct device *dev) return container_of(dev, struct dummy, gadget.dev); } -static struct dummy the_controller; - /*-------------------------------------------------------------------------*/ /* SLAVE/GADGET SIDE UTILITY ROUTINES */ @@ -973,9 +976,10 @@ static void init_dummy_udc_hw(struct dummy *dum) static int dummy_udc_probe(struct platform_device *pdev) { - struct dummy *dum = &the_controller; + struct dummy *dum; int rc; + dum = *((void **)dev_get_platdata(&pdev->dev)); dum->gadget.name = gadget_name; dum->gadget.ops = &dummy_ops; dum->gadget.max_speed = USB_SPEED_SUPER; @@ -2398,10 +2402,13 @@ static int dummy_h_get_frame(struct usb_hcd *hcd) static int dummy_setup(struct usb_hcd *hcd) { + struct dummy *dum; + + dum = *((void **)dev_get_platdata(hcd->self.controller)); hcd->self.sg_tablesize = ~0; if (usb_hcd_is_primary_hcd(hcd)) { - the_controller.hs_hcd = hcd_to_dummy_hcd(hcd); - the_controller.hs_hcd->dum = &the_controller; + dum->hs_hcd = hcd_to_dummy_hcd(hcd); + dum->hs_hcd->dum = dum; /* * Mark the first roothub as being USB 2.0. * The USB 3.0 roothub will be registered later by @@ -2410,8 +2417,8 @@ static int dummy_setup(struct usb_hcd *hcd) hcd->speed = HCD_USB2; hcd->self.root_hub->speed = USB_SPEED_HIGH; } else { - the_controller.ss_hcd = hcd_to_dummy_hcd(hcd); - the_controller.ss_hcd->dum = &the_controller; + dum->ss_hcd = hcd_to_dummy_hcd(hcd); + dum->ss_hcd->dum = dum; hcd->speed = HCD_USB3; hcd->self.root_hub->speed = USB_SPEED_SUPER; } @@ -2524,11 +2531,13 @@ static struct hc_driver dummy_hcd = { static int dummy_hcd_probe(struct platform_device *pdev) { + struct dummy *dum; struct usb_hcd *hs_hcd; struct usb_hcd *ss_hcd; int retval; dev_info(&pdev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc); + dum = *((void **)dev_get_platdata(&pdev->dev)); if (!mod_data.is_super_speed) dummy_hcd.flags = HCD_USB2; @@ -2561,7 +2570,7 @@ dealloc_usb2_hcd: usb_remove_hcd(hs_hcd); put_usb2_hcd: usb_put_hcd(hs_hcd); - the_controller.hs_hcd = the_controller.ss_hcd = NULL; + dum->hs_hcd = dum->ss_hcd = NULL; return retval; } @@ -2579,8 +2588,8 @@ static int dummy_hcd_remove(struct platform_device *pdev) usb_remove_hcd(dummy_hcd_to_hcd(dum->hs_hcd)); usb_put_hcd(dummy_hcd_to_hcd(dum->hs_hcd)); - the_controller.hs_hcd = NULL; - the_controller.ss_hcd = NULL; + dum->hs_hcd = NULL; + dum->ss_hcd = NULL; return 0; } @@ -2627,13 +2636,15 @@ static struct platform_driver dummy_hcd_driver = { }; /*-------------------------------------------------------------------------*/ - -static struct platform_device *the_udc_pdev; -static struct platform_device *the_hcd_pdev; +#define MAX_NUM_UDC 2 +static struct platform_device *the_udc_pdev[MAX_NUM_UDC]; +static struct platform_device *the_hcd_pdev[MAX_NUM_UDC]; static int __init init(void) { int retval = -ENOMEM; + int i; + struct dummy *dum[MAX_NUM_UDC]; if (usb_disabled()) return -ENODEV; @@ -2641,65 +2652,129 @@ static int __init init(void) if (!mod_data.is_high_speed && mod_data.is_super_speed) return -EINVAL; - the_hcd_pdev = platform_device_alloc(driver_name, -1); - if (!the_hcd_pdev) - return retval; - the_udc_pdev = platform_device_alloc(gadget_name, -1); - if (!the_udc_pdev) - goto err_alloc_udc; + if (mod_data.num < 1 || mod_data.num > MAX_NUM_UDC) { + pr_err("Number of emulated UDC must be in range of 1…%d\n", + MAX_NUM_UDC); + return -EINVAL; + } + + for (i = 0; i < mod_data.num; i++) { + the_hcd_pdev[i] = platform_device_alloc(driver_name, i); + if (!the_hcd_pdev[i]) { + i--; + while (i >= 0) + platform_device_put(the_hcd_pdev[i--]); + return retval; + } + } + for (i = 0; i < mod_data.num; i++) { + the_udc_pdev[i] = platform_device_alloc(gadget_name, i); + if (!the_udc_pdev[i]) { + i--; + while (i >= 0) + platform_device_put(the_udc_pdev[i--]); + goto err_alloc_udc; + } + } + for (i = 0; i < mod_data.num; i++) { + dum[i] = kzalloc(sizeof(struct dummy), GFP_KERNEL); + if (!dum[i]) + goto err_add_pdata; + retval = platform_device_add_data(the_hcd_pdev[i], &dum[i], + sizeof(void *)); + if (retval) + goto err_add_pdata; + retval = platform_device_add_data(the_udc_pdev[i], &dum[i], + sizeof(void *)); + if (retval) + goto err_add_pdata; + } retval = platform_driver_register(&dummy_hcd_driver); if (retval < 0) - goto err_register_hcd_driver; + goto err_add_pdata; retval = platform_driver_register(&dummy_udc_driver); if (retval < 0) goto err_register_udc_driver; - retval = platform_device_add(the_hcd_pdev); - if (retval < 0) - goto err_add_hcd; - if (!the_controller.hs_hcd || - (!the_controller.ss_hcd && mod_data.is_super_speed)) { - /* - * The hcd was added successfully but its probe function failed - * for some reason. - */ - retval = -EINVAL; - goto err_add_udc; + for (i = 0; i < mod_data.num; i++) { + retval = platform_device_add(the_hcd_pdev[i]); + if (retval < 0) { + i--; + while (i >= 0) + platform_device_del(the_hcd_pdev[i--]); + goto err_add_hcd; + } } - retval = platform_device_add(the_udc_pdev); - if (retval < 0) - goto err_add_udc; - if (!platform_get_drvdata(the_udc_pdev)) { - /* - * The udc was added successfully but its probe function failed - * for some reason. - */ - retval = -EINVAL; - goto err_probe_udc; + for (i = 0; i < mod_data.num; i++) { + if (!dum[i]->hs_hcd || + (!dum[i]->ss_hcd && mod_data.is_super_speed)) { + /* + * The hcd was added successfully but its probe + * function failed for some reason. + */ + retval = -EINVAL; + goto err_add_udc; + } + } + + for (i = 0; i < mod_data.num; i++) { + retval = platform_device_add(the_udc_pdev[i]); + if (retval < 0) { + i--; + while (i >= 0) + platform_device_del(the_udc_pdev[i]); + goto err_add_udc; + } + } + + for (i = 0; i < mod_data.num; i++) { + if (!platform_get_drvdata(the_udc_pdev[i])) { + /* + * The udc was added successfully but its probe + * function failed for some reason. + */ + retval = -EINVAL; + goto err_probe_udc; + } } return retval; err_probe_udc: - platform_device_del(the_udc_pdev); + for (i = 0; i < mod_data.num; i++) + platform_device_del(the_udc_pdev[i]); err_add_udc: - platform_device_del(the_hcd_pdev); + for (i = 0; i < mod_data.num; i++) + platform_device_del(the_hcd_pdev[i]); err_add_hcd: platform_driver_unregister(&dummy_udc_driver); err_register_udc_driver: platform_driver_unregister(&dummy_hcd_driver); -err_register_hcd_driver: - platform_device_put(the_udc_pdev); +err_add_pdata: + for (i = 0; i < mod_data.num; i++) + kfree(dum[i]); + for (i = 0; i < mod_data.num; i++) + platform_device_put(the_udc_pdev[i]); err_alloc_udc: - platform_device_put(the_hcd_pdev); + for (i = 0; i < mod_data.num; i++) + platform_device_put(the_hcd_pdev[i]); return retval; } module_init(init); static void __exit cleanup(void) { - platform_device_unregister(the_udc_pdev); - platform_device_unregister(the_hcd_pdev); + int i; + + for (i = 0; i < mod_data.num; i++) { + struct dummy *dum; + + dum = *((void **)dev_get_platdata(&the_udc_pdev[i]->dev)); + + platform_device_unregister(the_udc_pdev[i]); + platform_device_unregister(the_hcd_pdev[i]); + kfree(dum); + } platform_driver_unregister(&dummy_udc_driver); platform_driver_unregister(&dummy_hcd_driver); } diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c index d672250a61f..1ae180baa59 100644 --- a/drivers/usb/gadget/f_acm.c +++ b/drivers/usb/gadget/f_acm.c @@ -16,7 +16,9 @@ #include <linux/slab.h> #include <linux/kernel.h> +#include <linux/module.h> #include <linux/device.h> +#include <linux/err.h> #include "u_serial.h" #include "gadget_chips.h" @@ -87,7 +89,7 @@ static inline struct f_acm *port_to_acm(struct gserial *p) /* notification endpoint uses smallish and infrequent fixed-size messages */ -#define GS_LOG2_NOTIFY_INTERVAL 5 /* 1 << 5 == 32 msec */ +#define GS_NOTIFY_INTERVAL_MS 32 #define GS_NOTIFY_MAXPACKET 10 /* notification + 2 bytes */ /* interface and class descriptors: */ @@ -167,7 +169,7 @@ static struct usb_endpoint_descriptor acm_fs_notify_desc = { .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, .wMaxPacketSize = cpu_to_le16(GS_NOTIFY_MAXPACKET), - .bInterval = 1 << GS_LOG2_NOTIFY_INTERVAL, + .bInterval = GS_NOTIFY_INTERVAL_MS, }; static struct usb_endpoint_descriptor acm_fs_in_desc = { @@ -199,14 +201,13 @@ static struct usb_descriptor_header *acm_fs_function[] = { }; /* high speed support: */ - static struct usb_endpoint_descriptor acm_hs_notify_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, .wMaxPacketSize = cpu_to_le16(GS_NOTIFY_MAXPACKET), - .bInterval = GS_LOG2_NOTIFY_INTERVAL+4, + .bInterval = USB_MS_TO_HS_INTERVAL(GS_NOTIFY_INTERVAL_MS), }; static struct usb_endpoint_descriptor acm_hs_in_desc = { @@ -284,7 +285,6 @@ static struct usb_string acm_string_defs[] = { [ACM_CTRL_IDX].s = "CDC Abstract Control Model (ACM)", [ACM_DATA_IDX].s = "CDC ACM Data", [ACM_IAD_IDX ].s = "CDC Serial", - { /* ZEROES END LIST */ }, }; static struct usb_gadget_strings acm_string_table = { @@ -606,9 +606,23 @@ acm_bind(struct usb_configuration *c, struct usb_function *f) { struct usb_composite_dev *cdev = c->cdev; struct f_acm *acm = func_to_acm(f); + struct usb_string *us; int status; struct usb_ep *ep; + /* REVISIT might want instance-specific strings to help + * distinguish instances ... + */ + + /* maybe allocate device-global string IDs, and patch descriptors */ + us = usb_gstrings_attach(cdev, acm_strings, + ARRAY_SIZE(acm_string_defs)); + if (IS_ERR(us)) + return PTR_ERR(us); + acm_control_interface_desc.iInterface = us[ACM_CTRL_IDX].id; + acm_data_interface_desc.iInterface = us[ACM_DATA_IDX].id; + acm_iad_descriptor.iFunction = us[ACM_IAD_IDX].id; + /* allocate instance-specific interface IDs, and patch descriptors */ status = usb_interface_id(c, f); if (status < 0) @@ -659,37 +673,22 @@ acm_bind(struct usb_configuration *c, struct usb_function *f) acm->notify_req->complete = acm_cdc_notify_complete; acm->notify_req->context = acm; - /* copy descriptors */ - f->descriptors = usb_copy_descriptors(acm_fs_function); - if (!f->descriptors) - goto fail; - /* support all relevant hardware speeds... we expect that when * hardware is dual speed, all bulk-capable endpoints work at * both speeds */ - if (gadget_is_dualspeed(c->cdev->gadget)) { - acm_hs_in_desc.bEndpointAddress = - acm_fs_in_desc.bEndpointAddress; - acm_hs_out_desc.bEndpointAddress = - acm_fs_out_desc.bEndpointAddress; - acm_hs_notify_desc.bEndpointAddress = - acm_fs_notify_desc.bEndpointAddress; - - /* copy descriptors */ - f->hs_descriptors = usb_copy_descriptors(acm_hs_function); - } - if (gadget_is_superspeed(c->cdev->gadget)) { - acm_ss_in_desc.bEndpointAddress = - acm_fs_in_desc.bEndpointAddress; - acm_ss_out_desc.bEndpointAddress = - acm_fs_out_desc.bEndpointAddress; - - /* copy descriptors, and track endpoint copies */ - f->ss_descriptors = usb_copy_descriptors(acm_ss_function); - if (!f->ss_descriptors) - goto fail; - } + acm_hs_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress; + acm_hs_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress; + acm_hs_notify_desc.bEndpointAddress = + acm_fs_notify_desc.bEndpointAddress; + + acm_ss_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress; + acm_ss_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress; + + status = usb_assign_descriptors(f, acm_fs_function, acm_hs_function, + acm_ss_function); + if (status) + goto fail; DBG(cdev, "acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n", acm->port_num, @@ -716,25 +715,40 @@ fail: return status; } -static void -acm_unbind(struct usb_configuration *c, struct usb_function *f) +static struct f_acm *acm_alloc_basic_func(void) { - struct f_acm *acm = func_to_acm(f); + struct f_acm *acm; - if (gadget_is_dualspeed(c->cdev->gadget)) - usb_free_descriptors(f->hs_descriptors); - if (gadget_is_superspeed(c->cdev->gadget)) - usb_free_descriptors(f->ss_descriptors); - usb_free_descriptors(f->descriptors); - gs_free_req(acm->notify, acm->notify_req); - kfree(acm); + acm = kzalloc(sizeof(*acm), GFP_KERNEL); + if (!acm) + return NULL; + + spin_lock_init(&acm->lock); + + acm->port.connect = acm_connect; + acm->port.disconnect = acm_disconnect; + acm->port.send_break = acm_send_break; + + acm->port.func.name = "acm"; + /* descriptors are per-instance copies */ + acm->port.func.bind = acm_bind; + acm->port.func.set_alt = acm_set_alt; + acm->port.func.setup = acm_setup; + acm->port.func.disable = acm_disable; + + return acm; } -/* Some controllers can't support CDC ACM ... */ -static inline bool can_support_cdc(struct usb_configuration *c) +#ifdef USB_FACM_INCLUDED +static void +acm_old_unbind(struct usb_configuration *c, struct usb_function *f) { - /* everything else is *probably* fine ... */ - return true; + struct f_acm *acm = func_to_acm(f); + + usb_free_all_descriptors(f); + if (acm->notify_req) + gs_free_req(acm->notify, acm->notify_req); + kfree(acm); } /** @@ -745,70 +759,80 @@ static inline bool can_support_cdc(struct usb_configuration *c) * * Returns zero on success, else negative errno. * - * Caller must have called @gserial_setup() with enough ports to - * handle all the ones it binds. Caller is also responsible - * for calling @gserial_cleanup() before module unload. */ int acm_bind_config(struct usb_configuration *c, u8 port_num) { struct f_acm *acm; int status; - if (!can_support_cdc(c)) - return -EINVAL; + /* allocate and initialize one new instance */ + acm = acm_alloc_basic_func(); + if (!acm) + return -ENOMEM; - /* REVISIT might want instance-specific strings to help - * distinguish instances ... - */ + acm->port_num = port_num; + acm->port.func.unbind = acm_old_unbind; - /* maybe allocate device-global string IDs, and patch descriptors */ - if (acm_string_defs[ACM_CTRL_IDX].id == 0) { - status = usb_string_id(c->cdev); - if (status < 0) - return status; - acm_string_defs[ACM_CTRL_IDX].id = status; + status = usb_add_function(c, &acm->port.func); + if (status) + kfree(acm); + return status; +} - acm_control_interface_desc.iInterface = status; +#else - status = usb_string_id(c->cdev); - if (status < 0) - return status; - acm_string_defs[ACM_DATA_IDX].id = status; +static void acm_unbind(struct usb_configuration *c, struct usb_function *f) +{ + struct f_acm *acm = func_to_acm(f); - acm_data_interface_desc.iInterface = status; + acm_string_defs[0].id = 0; + usb_free_all_descriptors(f); + if (acm->notify_req) + gs_free_req(acm->notify, acm->notify_req); +} - status = usb_string_id(c->cdev); - if (status < 0) - return status; - acm_string_defs[ACM_IAD_IDX].id = status; +static void acm_free_func(struct usb_function *f) +{ + struct f_acm *acm = func_to_acm(f); - acm_iad_descriptor.iFunction = status; - } + kfree(acm); +} - /* allocate and initialize one new instance */ - acm = kzalloc(sizeof *acm, GFP_KERNEL); +static struct usb_function *acm_alloc_func(struct usb_function_instance *fi) +{ + struct f_serial_opts *opts; + struct f_acm *acm; + + acm = acm_alloc_basic_func(); if (!acm) - return -ENOMEM; + return ERR_PTR(-ENOMEM); - spin_lock_init(&acm->lock); + opts = container_of(fi, struct f_serial_opts, func_inst); + acm->port_num = opts->port_num; + acm->port.func.unbind = acm_unbind; + acm->port.func.free_func = acm_free_func; - acm->port_num = port_num; + return &acm->port.func; +} - acm->port.connect = acm_connect; - acm->port.disconnect = acm_disconnect; - acm->port.send_break = acm_send_break; +static void acm_free_instance(struct usb_function_instance *fi) +{ + struct f_serial_opts *opts; - acm->port.func.name = "acm"; - acm->port.func.strings = acm_strings; - /* descriptors are per-instance copies */ - acm->port.func.bind = acm_bind; - acm->port.func.unbind = acm_unbind; - acm->port.func.set_alt = acm_set_alt; - acm->port.func.setup = acm_setup; - acm->port.func.disable = acm_disable; + opts = container_of(fi, struct f_serial_opts, func_inst); + kfree(opts); +} - status = usb_add_function(c, &acm->port.func); - if (status) - kfree(acm); - return status; +static struct usb_function_instance *acm_alloc_instance(void) +{ + struct f_serial_opts *opts; + + opts = kzalloc(sizeof(*opts), GFP_KERNEL); + if (!opts) + return ERR_PTR(-ENOMEM); + opts->func_inst.free_func_inst = acm_free_instance; + return &opts->func_inst; } +DECLARE_USB_FUNCTION_INIT(acm, acm_alloc_instance, acm_alloc_func); +MODULE_LICENSE("GPL"); +#endif diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c index 95bc94f8e57..83420a310fb 100644 --- a/drivers/usb/gadget/f_ecm.c +++ b/drivers/usb/gadget/f_ecm.c @@ -91,7 +91,7 @@ static inline unsigned ecm_bitrate(struct usb_gadget *g) * encapsulated commands (vendor-specific, using control-OUT). */ -#define LOG2_STATUS_INTERVAL_MSEC 5 /* 1 << 5 == 32 msec */ +#define ECM_STATUS_INTERVAL_MS 32 #define ECM_STATUS_BYTECOUNT 16 /* 8 byte header + data */ @@ -192,7 +192,7 @@ static struct usb_endpoint_descriptor fs_ecm_notify_desc = { .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, .wMaxPacketSize = cpu_to_le16(ECM_STATUS_BYTECOUNT), - .bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC, + .bInterval = ECM_STATUS_INTERVAL_MS, }; static struct usb_endpoint_descriptor fs_ecm_in_desc = { @@ -239,7 +239,7 @@ static struct usb_endpoint_descriptor hs_ecm_notify_desc = { .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, .wMaxPacketSize = cpu_to_le16(ECM_STATUS_BYTECOUNT), - .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4, + .bInterval = USB_MS_TO_HS_INTERVAL(ECM_STATUS_INTERVAL_MS), }; static struct usb_endpoint_descriptor hs_ecm_in_desc = { @@ -288,7 +288,7 @@ static struct usb_endpoint_descriptor ss_ecm_notify_desc = { .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, .wMaxPacketSize = cpu_to_le16(ECM_STATUS_BYTECOUNT), - .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4, + .bInterval = USB_MS_TO_HS_INTERVAL(ECM_STATUS_INTERVAL_MS), }; static struct usb_ss_ep_comp_descriptor ss_ecm_intr_comp_desc = { @@ -330,6 +330,7 @@ static struct usb_ss_ep_comp_descriptor ss_ecm_bulk_comp_desc = { static struct usb_descriptor_header *ecm_ss_function[] = { /* CDC ECM control descriptors */ + (struct usb_descriptor_header *) &ecm_iad_descriptor, (struct usb_descriptor_header *) &ecm_control_intf, (struct usb_descriptor_header *) &ecm_header_desc, (struct usb_descriptor_header *) &ecm_union_desc, @@ -353,7 +354,7 @@ static struct usb_descriptor_header *ecm_ss_function[] = { static struct usb_string ecm_string_defs[] = { [0].s = "CDC Ethernet Control Model (ECM)", - [1].s = NULL /* DYNAMIC */, + [1].s = "", [2].s = "CDC Ethernet Data", [3].s = "CDC ECM", { } /* end of list */ @@ -742,42 +743,24 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f) ecm->notify_req->context = ecm; ecm->notify_req->complete = ecm_notify_complete; - /* copy descriptors, and track endpoint copies */ - f->descriptors = usb_copy_descriptors(ecm_fs_function); - if (!f->descriptors) - goto fail; - /* support all relevant hardware speeds... we expect that when * hardware is dual speed, all bulk-capable endpoints work at * both speeds */ - if (gadget_is_dualspeed(c->cdev->gadget)) { - hs_ecm_in_desc.bEndpointAddress = - fs_ecm_in_desc.bEndpointAddress; - hs_ecm_out_desc.bEndpointAddress = - fs_ecm_out_desc.bEndpointAddress; - hs_ecm_notify_desc.bEndpointAddress = - fs_ecm_notify_desc.bEndpointAddress; - - /* copy descriptors, and track endpoint copies */ - f->hs_descriptors = usb_copy_descriptors(ecm_hs_function); - if (!f->hs_descriptors) - goto fail; - } - - if (gadget_is_superspeed(c->cdev->gadget)) { - ss_ecm_in_desc.bEndpointAddress = - fs_ecm_in_desc.bEndpointAddress; - ss_ecm_out_desc.bEndpointAddress = - fs_ecm_out_desc.bEndpointAddress; - ss_ecm_notify_desc.bEndpointAddress = - fs_ecm_notify_desc.bEndpointAddress; - - /* copy descriptors, and track endpoint copies */ - f->ss_descriptors = usb_copy_descriptors(ecm_ss_function); - if (!f->ss_descriptors) - goto fail; - } + hs_ecm_in_desc.bEndpointAddress = fs_ecm_in_desc.bEndpointAddress; + hs_ecm_out_desc.bEndpointAddress = fs_ecm_out_desc.bEndpointAddress; + hs_ecm_notify_desc.bEndpointAddress = + fs_ecm_notify_desc.bEndpointAddress; + + ss_ecm_in_desc.bEndpointAddress = fs_ecm_in_desc.bEndpointAddress; + ss_ecm_out_desc.bEndpointAddress = fs_ecm_out_desc.bEndpointAddress; + ss_ecm_notify_desc.bEndpointAddress = + fs_ecm_notify_desc.bEndpointAddress; + + status = usb_assign_descriptors(f, ecm_fs_function, ecm_hs_function, + ecm_ss_function); + if (status) + goto fail; /* NOTE: all that is done without knowing or caring about * the network link ... which is unavailable to this code @@ -795,11 +778,6 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f) return 0; fail: - if (f->descriptors) - usb_free_descriptors(f->descriptors); - if (f->hs_descriptors) - usb_free_descriptors(f->hs_descriptors); - if (ecm->notify_req) { kfree(ecm->notify_req->buf); usb_ep_free_request(ecm->notify, ecm->notify_req); @@ -808,9 +786,9 @@ fail: /* we might as well release our claims on endpoints */ if (ecm->notify) ecm->notify->driver_data = NULL; - if (ecm->port.out_ep->desc) + if (ecm->port.out_ep) ecm->port.out_ep->driver_data = NULL; - if (ecm->port.in_ep->desc) + if (ecm->port.in_ep) ecm->port.in_ep->driver_data = NULL; ERROR(cdev, "%s: can't bind, err %d\n", f->name, status); @@ -825,16 +803,11 @@ ecm_unbind(struct usb_configuration *c, struct usb_function *f) DBG(c->cdev, "ecm unbind\n"); - if (gadget_is_superspeed(c->cdev->gadget)) - usb_free_descriptors(f->ss_descriptors); - if (gadget_is_dualspeed(c->cdev->gadget)) - usb_free_descriptors(f->hs_descriptors); - usb_free_descriptors(f->descriptors); + ecm_string_defs[0].id = 0; + usb_free_all_descriptors(f); kfree(ecm->notify_req->buf); usb_ep_free_request(ecm->notify, ecm->notify_req); - - ecm_string_defs[1].s = NULL; kfree(ecm); } @@ -859,36 +832,15 @@ ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) if (!can_support_ecm(c->cdev->gadget) || !ethaddr) return -EINVAL; - /* maybe allocate device-global string IDs */ if (ecm_string_defs[0].id == 0) { - - /* control interface label */ - status = usb_string_id(c->cdev); - if (status < 0) - return status; - ecm_string_defs[0].id = status; - ecm_control_intf.iInterface = status; - - /* data interface label */ - status = usb_string_id(c->cdev); - if (status < 0) + status = usb_string_ids_tab(c->cdev, ecm_string_defs); + if (status) return status; - ecm_string_defs[2].id = status; - ecm_data_intf.iInterface = status; - /* MAC address */ - status = usb_string_id(c->cdev); - if (status < 0) - return status; - ecm_string_defs[1].id = status; - ecm_desc.iMACAddress = status; - - /* IAD label */ - status = usb_string_id(c->cdev); - if (status < 0) - return status; - ecm_string_defs[3].id = status; - ecm_iad_descriptor.iFunction = status; + ecm_control_intf.iInterface = ecm_string_defs[0].id; + ecm_data_intf.iInterface = ecm_string_defs[2].id; + ecm_desc.iMACAddress = ecm_string_defs[1].id; + ecm_iad_descriptor.iFunction = ecm_string_defs[3].id; } /* allocate and initialize one new instance */ @@ -913,9 +865,7 @@ ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) ecm->port.func.disable = ecm_disable; status = usb_add_function(c, &ecm->port.func); - if (status) { - ecm_string_defs[1].s = NULL; + if (status) kfree(ecm); - } return status; } diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c index 1a7b2dd7d40..cf0ebee8556 100644 --- a/drivers/usb/gadget/f_eem.c +++ b/drivers/usb/gadget/f_eem.c @@ -274,38 +274,20 @@ eem_bind(struct usb_configuration *c, struct usb_function *f) status = -ENOMEM; - /* copy descriptors, and track endpoint copies */ - f->descriptors = usb_copy_descriptors(eem_fs_function); - if (!f->descriptors) - goto fail; - /* support all relevant hardware speeds... we expect that when * hardware is dual speed, all bulk-capable endpoints work at * both speeds */ - if (gadget_is_dualspeed(c->cdev->gadget)) { - eem_hs_in_desc.bEndpointAddress = - eem_fs_in_desc.bEndpointAddress; - eem_hs_out_desc.bEndpointAddress = - eem_fs_out_desc.bEndpointAddress; - - /* copy descriptors, and track endpoint copies */ - f->hs_descriptors = usb_copy_descriptors(eem_hs_function); - if (!f->hs_descriptors) - goto fail; - } + eem_hs_in_desc.bEndpointAddress = eem_fs_in_desc.bEndpointAddress; + eem_hs_out_desc.bEndpointAddress = eem_fs_out_desc.bEndpointAddress; - if (gadget_is_superspeed(c->cdev->gadget)) { - eem_ss_in_desc.bEndpointAddress = - eem_fs_in_desc.bEndpointAddress; - eem_ss_out_desc.bEndpointAddress = - eem_fs_out_desc.bEndpointAddress; + eem_ss_in_desc.bEndpointAddress = eem_fs_in_desc.bEndpointAddress; + eem_ss_out_desc.bEndpointAddress = eem_fs_out_desc.bEndpointAddress; - /* copy descriptors, and track endpoint copies */ - f->ss_descriptors = usb_copy_descriptors(eem_ss_function); - if (!f->ss_descriptors) - goto fail; - } + status = usb_assign_descriptors(f, eem_fs_function, eem_hs_function, + eem_ss_function); + if (status) + goto fail; DBG(cdev, "CDC Ethernet (EEM): %s speed IN/%s OUT/%s\n", gadget_is_superspeed(c->cdev->gadget) ? "super" : @@ -314,15 +296,10 @@ eem_bind(struct usb_configuration *c, struct usb_function *f) return 0; fail: - if (f->descriptors) - usb_free_descriptors(f->descriptors); - if (f->hs_descriptors) - usb_free_descriptors(f->hs_descriptors); - - /* we might as well release our claims on endpoints */ - if (eem->port.out_ep->desc) + usb_free_all_descriptors(f); + if (eem->port.out_ep) eem->port.out_ep->driver_data = NULL; - if (eem->port.in_ep->desc) + if (eem->port.in_ep) eem->port.in_ep->driver_data = NULL; ERROR(cdev, "%s: can't bind, err %d\n", f->name, status); @@ -337,11 +314,7 @@ eem_unbind(struct usb_configuration *c, struct usb_function *f) DBG(c->cdev, "eem unbind\n"); - if (gadget_is_superspeed(c->cdev->gadget)) - usb_free_descriptors(f->ss_descriptors); - if (gadget_is_dualspeed(c->cdev->gadget)) - usb_free_descriptors(f->hs_descriptors); - usb_free_descriptors(f->descriptors); + usb_free_all_descriptors(f); kfree(eem); } diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 64c4ec10d1f..c377ff84bf2 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -1103,8 +1103,8 @@ static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts) return 0; for (;;) { - char *end, *eq, *comma; unsigned long value; + char *eq, *comma; /* Option limit */ comma = strchr(opts, ','); @@ -1120,8 +1120,7 @@ static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts) *eq = 0; /* Parse value */ - value = simple_strtoul(eq + 1, &end, 0); - if (unlikely(*end != ',' && *end != 0)) { + if (kstrtoul(eq + 1, 0, &value)) { pr_err("%s: invalid value: %s\n", opts, eq + 1); return -EINVAL; } @@ -1153,15 +1152,15 @@ static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts) pr_err("%s: unmapped value: %lu\n", opts, value); return -EINVAL; } - } - else if (!memcmp(opts, "gid", 3)) + } else if (!memcmp(opts, "gid", 3)) { data->perms.gid = make_kgid(current_user_ns(), value); if (!gid_valid(data->perms.gid)) { pr_err("%s: unmapped value: %lu\n", opts, value); return -EINVAL; } - else + } else { goto invalid; + } break; default: @@ -1236,6 +1235,7 @@ static struct file_system_type ffs_fs_type = { .mount = ffs_fs_mount, .kill_sb = ffs_fs_kill_sb, }; +MODULE_ALIAS_FS("functionfs"); /* Driver's main init/cleanup functions *************************************/ @@ -2097,7 +2097,7 @@ static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep, if (isHS) func->function.hs_descriptors[(long)valuep] = desc; else - func->function.descriptors[(long)valuep] = desc; + func->function.fs_descriptors[(long)valuep] = desc; if (!desc || desc->bDescriptorType != USB_DT_ENDPOINT) return 0; @@ -2249,7 +2249,7 @@ static int ffs_func_bind(struct usb_configuration *c, * numbers without worrying that it may be described later on. */ if (likely(full)) { - func->function.descriptors = data->fs_descs; + func->function.fs_descriptors = data->fs_descs; ret = ffs_do_descs(ffs->fs_descs_count, data->raw_descs, sizeof data->raw_descs, diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c index 511e527178e..6e69a8e8d22 100644 --- a/drivers/usb/gadget/f_hid.c +++ b/drivers/usb/gadget/f_hid.c @@ -573,7 +573,6 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f) goto fail; hidg_interface_desc.bInterfaceNumber = status; - /* allocate instance-specific endpoints */ status = -ENODEV; ep = usb_ep_autoconfig(c->cdev->gadget, &hidg_fs_in_ep_desc); @@ -609,20 +608,15 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f) hidg_desc.desc[0].wDescriptorLength = cpu_to_le16(hidg->report_desc_length); - /* copy descriptors */ - f->descriptors = usb_copy_descriptors(hidg_fs_descriptors); - if (!f->descriptors) - goto fail; + hidg_hs_in_ep_desc.bEndpointAddress = + hidg_fs_in_ep_desc.bEndpointAddress; + hidg_hs_out_ep_desc.bEndpointAddress = + hidg_fs_out_ep_desc.bEndpointAddress; - if (gadget_is_dualspeed(c->cdev->gadget)) { - hidg_hs_in_ep_desc.bEndpointAddress = - hidg_fs_in_ep_desc.bEndpointAddress; - hidg_hs_out_ep_desc.bEndpointAddress = - hidg_fs_out_ep_desc.bEndpointAddress; - f->hs_descriptors = usb_copy_descriptors(hidg_hs_descriptors); - if (!f->hs_descriptors) - goto fail; - } + status = usb_assign_descriptors(f, hidg_fs_descriptors, + hidg_hs_descriptors, NULL); + if (status) + goto fail; mutex_init(&hidg->lock); spin_lock_init(&hidg->spinlock); @@ -649,9 +643,7 @@ fail: usb_ep_free_request(hidg->in_ep, hidg->req); } - usb_free_descriptors(f->hs_descriptors); - usb_free_descriptors(f->descriptors); - + usb_free_all_descriptors(f); return status; } @@ -668,9 +660,7 @@ static void hidg_unbind(struct usb_configuration *c, struct usb_function *f) kfree(hidg->req->buf); usb_ep_free_request(hidg->in_ep, hidg->req); - /* free descriptors copies */ - usb_free_descriptors(f->hs_descriptors); - usb_free_descriptors(f->descriptors); + usb_free_all_descriptors(f); kfree(hidg->report_desc); kfree(hidg); diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c index 7275706caeb..4a3873a0f2d 100644 --- a/drivers/usb/gadget/f_loopback.c +++ b/drivers/usb/gadget/f_loopback.c @@ -15,10 +15,11 @@ #include <linux/slab.h> #include <linux/kernel.h> #include <linux/device.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/usb/composite.h> #include "g_zero.h" -#include "gadget_chips.h" - /* * LOOPBACK FUNCTION ... a testing vehicle for USB peripherals, @@ -44,9 +45,8 @@ static inline struct f_loopback *func_to_loop(struct usb_function *f) return container_of(f, struct f_loopback, function); } -static unsigned qlen = 32; -module_param(qlen, uint, 0); -MODULE_PARM_DESC(qlenn, "depth of loopback queue"); +static unsigned qlen; +static unsigned buflen; /*-------------------------------------------------------------------------*/ @@ -171,12 +171,12 @@ static struct usb_gadget_strings *loopback_strings[] = { /*-------------------------------------------------------------------------*/ -static int __init -loopback_bind(struct usb_configuration *c, struct usb_function *f) +static int loopback_bind(struct usb_configuration *c, struct usb_function *f) { struct usb_composite_dev *cdev = c->cdev; struct f_loopback *loop = func_to_loop(f); int id; + int ret; /* allocate interface ID(s) */ id = usb_interface_id(c, f); @@ -184,6 +184,12 @@ loopback_bind(struct usb_configuration *c, struct usb_function *f) return id; loopback_intf.bInterfaceNumber = id; + id = usb_string_id(cdev); + if (id < 0) + return id; + strings_loopback[0].id = id; + loopback_intf.iInterface = id; + /* allocate endpoints */ loop->in_ep = usb_ep_autoconfig(cdev->gadget, &fs_loop_source_desc); @@ -201,22 +207,19 @@ autoconf_fail: loop->out_ep->driver_data = cdev; /* claim */ /* support high speed hardware */ - if (gadget_is_dualspeed(c->cdev->gadget)) { - hs_loop_source_desc.bEndpointAddress = - fs_loop_source_desc.bEndpointAddress; - hs_loop_sink_desc.bEndpointAddress = - fs_loop_sink_desc.bEndpointAddress; - f->hs_descriptors = hs_loopback_descs; - } + hs_loop_source_desc.bEndpointAddress = + fs_loop_source_desc.bEndpointAddress; + hs_loop_sink_desc.bEndpointAddress = fs_loop_sink_desc.bEndpointAddress; /* support super speed hardware */ - if (gadget_is_superspeed(c->cdev->gadget)) { - ss_loop_source_desc.bEndpointAddress = - fs_loop_source_desc.bEndpointAddress; - ss_loop_sink_desc.bEndpointAddress = - fs_loop_sink_desc.bEndpointAddress; - f->ss_descriptors = ss_loopback_descs; - } + ss_loop_source_desc.bEndpointAddress = + fs_loop_source_desc.bEndpointAddress; + ss_loop_sink_desc.bEndpointAddress = fs_loop_sink_desc.bEndpointAddress; + + ret = usb_assign_descriptors(f, fs_loopback_descs, hs_loopback_descs, + ss_loopback_descs); + if (ret) + return ret; DBG(cdev, "%s speed %s: IN/%s, OUT/%s\n", (gadget_is_superspeed(c->cdev->gadget) ? "super" : @@ -225,9 +228,9 @@ autoconf_fail: return 0; } -static void -loopback_unbind(struct usb_configuration *c, struct usb_function *f) +static void lb_free_func(struct usb_function *f) { + usb_free_all_descriptors(f); kfree(func_to_loop(f)); } @@ -367,64 +370,64 @@ static void loopback_disable(struct usb_function *f) disable_loopback(loop); } -/*-------------------------------------------------------------------------*/ - -static int __init loopback_bind_config(struct usb_configuration *c) +static struct usb_function *loopback_alloc(struct usb_function_instance *fi) { struct f_loopback *loop; - int status; + struct f_lb_opts *lb_opts; loop = kzalloc(sizeof *loop, GFP_KERNEL); if (!loop) - return -ENOMEM; + return ERR_PTR(-ENOMEM); + + lb_opts = container_of(fi, struct f_lb_opts, func_inst); + buflen = lb_opts->bulk_buflen; + qlen = lb_opts->qlen; + if (!qlen) + qlen = 32; loop->function.name = "loopback"; - loop->function.descriptors = fs_loopback_descs; loop->function.bind = loopback_bind; - loop->function.unbind = loopback_unbind; loop->function.set_alt = loopback_set_alt; loop->function.disable = loopback_disable; + loop->function.strings = loopback_strings; - status = usb_add_function(c, &loop->function); - if (status) - kfree(loop); - return status; -} + loop->function.free_func = lb_free_func; -static struct usb_configuration loopback_driver = { - .label = "loopback", - .strings = loopback_strings, - .bConfigurationValue = 2, - .bmAttributes = USB_CONFIG_ATT_SELFPOWER, - /* .iConfiguration = DYNAMIC */ -}; + return &loop->function; +} -/** - * loopback_add - add a loopback testing configuration to a device - * @cdev: the device to support the loopback configuration - */ -int __init loopback_add(struct usb_composite_dev *cdev, bool autoresume) +static void lb_free_instance(struct usb_function_instance *fi) { - int id; + struct f_lb_opts *lb_opts; - /* allocate string ID(s) */ - id = usb_string_id(cdev); - if (id < 0) - return id; - strings_loopback[0].id = id; + lb_opts = container_of(fi, struct f_lb_opts, func_inst); + kfree(lb_opts); +} - loopback_intf.iInterface = id; - loopback_driver.iConfiguration = id; +static struct usb_function_instance *loopback_alloc_instance(void) +{ + struct f_lb_opts *lb_opts; - /* support autoresume for remote wakeup testing */ - if (autoresume) - loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + lb_opts = kzalloc(sizeof(*lb_opts), GFP_KERNEL); + if (!lb_opts) + return ERR_PTR(-ENOMEM); + lb_opts->func_inst.free_func_inst = lb_free_instance; + return &lb_opts->func_inst; +} +DECLARE_USB_FUNCTION(Loopback, loopback_alloc_instance, loopback_alloc); - /* support OTG systems */ - if (gadget_is_otg(cdev->gadget)) { - loopback_driver.descriptors = otg_desc; - loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; - } +int __init lb_modinit(void) +{ + int ret; - return usb_add_config(cdev, &loopback_driver, loopback_bind_config); + ret = usb_function_register(&Loopbackusb_func); + if (ret) + return ret; + return ret; } +void __exit lb_modexit(void) +{ + usb_function_unregister(&Loopbackusb_func); +} + +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 3a7668bde3e..97666e8b1b9 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -228,10 +228,6 @@ static const char fsg_string_interface[] = "Mass Storage"; -#define FSG_NO_DEVICE_STRINGS 1 -#define FSG_NO_OTG 1 -#define FSG_NO_INTR_EP 1 - #include "storage_common.c" @@ -250,20 +246,6 @@ struct fsg_operations { * set). */ int (*thread_exits)(struct fsg_common *common); - - /* - * Called prior to ejection. Negative return means error, - * zero means to continue with ejection, positive means not to - * eject. - */ - int (*pre_eject)(struct fsg_common *common, - struct fsg_lun *lun, int num); - /* - * Called after ejection. Negative return means error, zero - * or positive is just a success. - */ - int (*post_eject)(struct fsg_common *common, - struct fsg_lun *lun, int num); }; /* Data shared by all the FSG instances. */ @@ -996,7 +978,7 @@ static int do_synchronize_cache(struct fsg_common *common) static void invalidate_sub(struct fsg_lun *curlun) { struct file *filp = curlun->filp; - struct inode *inode = filp->f_path.dentry->d_inode; + struct inode *inode = file_inode(filp); unsigned long rc; rc = invalidate_mapping_pages(inode->i_mapping, 0, -1); @@ -1378,26 +1360,13 @@ static int do_start_stop(struct fsg_common *common) if (!loej) return 0; - /* Simulate an unload/eject */ - if (common->ops && common->ops->pre_eject) { - int r = common->ops->pre_eject(common, curlun, - curlun - common->luns); - if (unlikely(r < 0)) - return r; - else if (r) - return 0; - } - up_read(&common->filesem); down_write(&common->filesem); fsg_lun_close(curlun); up_write(&common->filesem); down_read(&common->filesem); - return common->ops && common->ops->post_eject - ? min(0, common->ops->post_eject(common, curlun, - curlun - common->luns)) - : 0; + return 0; } static int do_prevent_allow(struct fsg_common *common) @@ -1722,7 +1691,7 @@ static int check_command(struct fsg_common *common, int cmnd_size, int needs_medium, const char *name) { int i; - int lun = common->cmnd[1] >> 5; + unsigned int lun = common->cmnd[1] >> 5; static const char dirletter[4] = {'u', 'o', 'i', 'n'}; char hdlen[20]; struct fsg_lun *curlun; @@ -1788,7 +1757,7 @@ static int check_command(struct fsg_common *common, int cmnd_size, /* Check that the LUN values are consistent */ if (common->lun != lun) - DBG(common, "using LUN %d from CBW, not LUN %d from CDB\n", + DBG(common, "using LUN %u from CBW, not LUN %u from CDB\n", common->lun, lun); /* Check the LUN */ @@ -1808,7 +1777,7 @@ static int check_command(struct fsg_common *common, int cmnd_size, */ if (common->cmnd[0] != INQUIRY && common->cmnd[0] != REQUEST_SENSE) { - DBG(common, "unsupported LUN %d\n", common->lun); + DBG(common, "unsupported LUN %u\n", common->lun); return -EINVAL; } } @@ -2200,7 +2169,7 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) if (common->data_size == 0) common->data_dir = DATA_DIR_NONE; common->lun = cbw->Lun; - if (common->lun >= 0 && common->lun < common->nluns) + if (common->lun < common->nluns) common->curlun = &common->luns[common->lun]; else common->curlun = NULL; @@ -2904,9 +2873,7 @@ static void fsg_unbind(struct usb_configuration *c, struct usb_function *f) } fsg_common_put(common); - usb_free_descriptors(fsg->function.descriptors); - usb_free_descriptors(fsg->function.hs_descriptors); - usb_free_descriptors(fsg->function.ss_descriptors); + usb_free_all_descriptors(&fsg->function); kfree(fsg); } @@ -2916,6 +2883,8 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f) struct usb_gadget *gadget = c->cdev->gadget; int i; struct usb_ep *ep; + unsigned max_burst; + int ret; fsg->gadget = gadget; @@ -2939,45 +2908,27 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f) ep->driver_data = fsg->common; /* claim the endpoint */ fsg->bulk_out = ep; - /* Copy descriptors */ - f->descriptors = usb_copy_descriptors(fsg_fs_function); - if (unlikely(!f->descriptors)) - return -ENOMEM; - - if (gadget_is_dualspeed(gadget)) { - /* Assume endpoint addresses are the same for both speeds */ - fsg_hs_bulk_in_desc.bEndpointAddress = - fsg_fs_bulk_in_desc.bEndpointAddress; - fsg_hs_bulk_out_desc.bEndpointAddress = - fsg_fs_bulk_out_desc.bEndpointAddress; - f->hs_descriptors = usb_copy_descriptors(fsg_hs_function); - if (unlikely(!f->hs_descriptors)) { - usb_free_descriptors(f->descriptors); - return -ENOMEM; - } - } - - if (gadget_is_superspeed(gadget)) { - unsigned max_burst; + /* Assume endpoint addresses are the same for both speeds */ + fsg_hs_bulk_in_desc.bEndpointAddress = + fsg_fs_bulk_in_desc.bEndpointAddress; + fsg_hs_bulk_out_desc.bEndpointAddress = + fsg_fs_bulk_out_desc.bEndpointAddress; - /* Calculate bMaxBurst, we know packet size is 1024 */ - max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15); + /* Calculate bMaxBurst, we know packet size is 1024 */ + max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15); - fsg_ss_bulk_in_desc.bEndpointAddress = - fsg_fs_bulk_in_desc.bEndpointAddress; - fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst; + fsg_ss_bulk_in_desc.bEndpointAddress = + fsg_fs_bulk_in_desc.bEndpointAddress; + fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst; - fsg_ss_bulk_out_desc.bEndpointAddress = - fsg_fs_bulk_out_desc.bEndpointAddress; - fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst; + fsg_ss_bulk_out_desc.bEndpointAddress = + fsg_fs_bulk_out_desc.bEndpointAddress; + fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst; - f->ss_descriptors = usb_copy_descriptors(fsg_ss_function); - if (unlikely(!f->ss_descriptors)) { - usb_free_descriptors(f->hs_descriptors); - usb_free_descriptors(f->descriptors); - return -ENOMEM; - } - } + ret = usb_assign_descriptors(f, fsg_fs_function, fsg_hs_function, + fsg_ss_function); + if (ret) + goto autoconf_fail; return 0; @@ -2986,7 +2937,6 @@ autoconf_fail: return -ENOTSUPP; } - /****************************** ADD FUNCTION ******************************/ static struct usb_gadget_strings *fsg_strings_array[] = { diff --git a/drivers/usb/gadget/f_midi.c b/drivers/usb/gadget/f_midi.c index 8ed1259fe80..263e721c269 100644 --- a/drivers/usb/gadget/f_midi.c +++ b/drivers/usb/gadget/f_midi.c @@ -414,7 +414,7 @@ static void f_midi_unbind(struct usb_configuration *c, struct usb_function *f) kfree(midi->id); midi->id = NULL; - usb_free_descriptors(f->descriptors); + usb_free_all_descriptors(f); kfree(midi); } @@ -881,19 +881,25 @@ f_midi_bind(struct usb_configuration *c, struct usb_function *f) * both speeds */ /* copy descriptors, and track endpoint copies */ + f->fs_descriptors = usb_copy_descriptors(midi_function); + if (!f->fs_descriptors) + goto fail_f_midi; + if (gadget_is_dualspeed(c->cdev->gadget)) { - c->highspeed = true; bulk_in_desc.wMaxPacketSize = cpu_to_le16(512); bulk_out_desc.wMaxPacketSize = cpu_to_le16(512); f->hs_descriptors = usb_copy_descriptors(midi_function); - } else { - f->descriptors = usb_copy_descriptors(midi_function); + if (!f->hs_descriptors) + goto fail_f_midi; } kfree(midi_function); return 0; +fail_f_midi: + kfree(midi_function); + usb_free_descriptors(f->hs_descriptors); fail: /* we might as well release our claims on endpoints */ if (midi->out_ep) diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c index b651b529c67..5e7557e23ec 100644 --- a/drivers/usb/gadget/f_ncm.c +++ b/drivers/usb/gadget/f_ncm.c @@ -56,8 +56,9 @@ struct f_ncm { u8 notify_state; bool is_open; - struct ndp_parser_opts *parser_opts; + const struct ndp_parser_opts *parser_opts; bool is_crc; + u32 ndp_sign; /* * for notification, it is accessed from both @@ -102,7 +103,7 @@ static inline unsigned ncm_bitrate(struct usb_gadget *g) USB_CDC_NCM_NTB32_SUPPORTED) static struct usb_cdc_ncm_ntb_parameters ntb_parameters = { - .wLength = sizeof ntb_parameters, + .wLength = cpu_to_le16(sizeof(ntb_parameters)), .bmNtbFormatsSupported = cpu_to_le16(FORMATS_SUPPORTED), .dwNtbInMaxSize = cpu_to_le32(NTB_DEFAULT_IN_SIZE), .wNdpInDivisor = cpu_to_le16(4), @@ -121,7 +122,7 @@ static struct usb_cdc_ncm_ntb_parameters ntb_parameters = { * waste less bandwidth. */ -#define LOG2_STATUS_INTERVAL_MSEC 5 /* 1 << 5 == 32 msec */ +#define NCM_STATUS_INTERVAL_MS 32 #define NCM_STATUS_BYTECOUNT 16 /* 8 byte header + data */ static struct usb_interface_assoc_descriptor ncm_iad_desc __initdata = { @@ -230,7 +231,7 @@ static struct usb_endpoint_descriptor fs_ncm_notify_desc __initdata = { .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, .wMaxPacketSize = cpu_to_le16(NCM_STATUS_BYTECOUNT), - .bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC, + .bInterval = NCM_STATUS_INTERVAL_MS, }; static struct usb_endpoint_descriptor fs_ncm_in_desc __initdata = { @@ -275,7 +276,7 @@ static struct usb_endpoint_descriptor hs_ncm_notify_desc __initdata = { .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, .wMaxPacketSize = cpu_to_le16(NCM_STATUS_BYTECOUNT), - .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4, + .bInterval = USB_MS_TO_HS_INTERVAL(NCM_STATUS_INTERVAL_MS), }; static struct usb_endpoint_descriptor hs_ncm_in_desc __initdata = { .bLength = USB_DT_ENDPOINT_SIZE, @@ -321,7 +322,7 @@ static struct usb_descriptor_header *ncm_hs_function[] __initdata = { static struct usb_string ncm_string_defs[] = { [STRING_CTRL_IDX].s = "CDC Network Control Model (NCM)", - [STRING_MAC_IDX].s = NULL /* DYNAMIC */, + [STRING_MAC_IDX].s = "", [STRING_DATA_IDX].s = "CDC Network Data", [STRING_IAD_IDX].s = "CDC NCM", { } /* end of list */ @@ -390,8 +391,8 @@ struct ndp_parser_opts { .next_fp_index = 2, \ } -static struct ndp_parser_opts ndp16_opts = INIT_NDP16_OPTS; -static struct ndp_parser_opts ndp32_opts = INIT_NDP32_OPTS; +static const struct ndp_parser_opts ndp16_opts = INIT_NDP16_OPTS; +static const struct ndp_parser_opts ndp32_opts = INIT_NDP32_OPTS; static inline void put_ncm(__le16 **p, unsigned size, unsigned val) { @@ -732,8 +733,7 @@ static int ncm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) default: goto invalid; } - ncm->parser_opts->ndp_sign &= ~NCM_NDP_HDR_CRC_MASK; - ncm->parser_opts->ndp_sign |= ndp_hdr_crc; + ncm->ndp_sign = ncm->parser_opts->ndp_sign | ndp_hdr_crc; value = 0; break; } @@ -869,15 +869,19 @@ static struct sk_buff *ncm_wrap_ntb(struct gether *port, struct sk_buff *skb2; int ncb_len = 0; __le16 *tmp; - int div = ntb_parameters.wNdpInDivisor; - int rem = ntb_parameters.wNdpInPayloadRemainder; + int div; + int rem; int pad; - int ndp_align = ntb_parameters.wNdpInAlignment; + int ndp_align; int ndp_pad; unsigned max_size = ncm->port.fixed_in_len; - struct ndp_parser_opts *opts = ncm->parser_opts; + const struct ndp_parser_opts *opts = ncm->parser_opts; unsigned crc_len = ncm->is_crc ? sizeof(uint32_t) : 0; + div = le16_to_cpu(ntb_parameters.wNdpInDivisor); + rem = le16_to_cpu(ntb_parameters.wNdpInPayloadRemainder); + ndp_align = le16_to_cpu(ntb_parameters.wNdpInAlignment); + ncb_len += opts->nth_size; ndp_pad = ALIGN(ncb_len, ndp_align) - ncb_len; ncb_len += ndp_pad; @@ -917,7 +921,7 @@ static struct sk_buff *ncm_wrap_ntb(struct gether *port, tmp = (void *)tmp + ndp_pad; /* NDP */ - put_unaligned_le32(opts->ndp_sign, tmp); /* dwSignature */ + put_unaligned_le32(ncm->ndp_sign, tmp); /* dwSignature */ tmp += 2; /* wLength */ put_unaligned_le16(ncb_len - opts->nth_size - pad, tmp++); @@ -961,7 +965,7 @@ static int ncm_unwrap_ntb(struct gether *port, struct sk_buff *skb2; int ret = -EINVAL; unsigned max_size = le32_to_cpu(ntb_parameters.dwNtbOutMaxSize); - struct ndp_parser_opts *opts = ncm->parser_opts; + const struct ndp_parser_opts *opts = ncm->parser_opts; unsigned crc_len = ncm->is_crc ? sizeof(uint32_t) : 0; int dgram_counter; @@ -998,7 +1002,7 @@ static int ncm_unwrap_ntb(struct gether *port, /* walk through NDP */ tmp = ((void *)skb->data) + index; - if (get_unaligned_le32(tmp) != opts->ndp_sign) { + if (get_unaligned_le32(tmp) != ncm->ndp_sign) { INFO(port->func.config->cdev, "Wrong NDP SIGN\n"); goto err; } @@ -1208,30 +1212,18 @@ ncm_bind(struct usb_configuration *c, struct usb_function *f) ncm->notify_req->context = ncm; ncm->notify_req->complete = ncm_notify_complete; - /* copy descriptors, and track endpoint copies */ - f->descriptors = usb_copy_descriptors(ncm_fs_function); - if (!f->descriptors) - goto fail; - /* * support all relevant hardware speeds... we expect that when * hardware is dual speed, all bulk-capable endpoints work at * both speeds */ - if (gadget_is_dualspeed(c->cdev->gadget)) { - hs_ncm_in_desc.bEndpointAddress = - fs_ncm_in_desc.bEndpointAddress; - hs_ncm_out_desc.bEndpointAddress = - fs_ncm_out_desc.bEndpointAddress; - hs_ncm_notify_desc.bEndpointAddress = - fs_ncm_notify_desc.bEndpointAddress; - - /* copy descriptors, and track endpoint copies */ - f->hs_descriptors = usb_copy_descriptors(ncm_hs_function); - if (!f->hs_descriptors) - goto fail; - } + hs_ncm_in_desc.bEndpointAddress = fs_ncm_in_desc.bEndpointAddress; + hs_ncm_out_desc.bEndpointAddress = fs_ncm_out_desc.bEndpointAddress; + hs_ncm_notify_desc.bEndpointAddress = + fs_ncm_notify_desc.bEndpointAddress; + status = usb_assign_descriptors(f, ncm_fs_function, ncm_hs_function, + NULL); /* * NOTE: all that is done without knowing or caring about * the network link ... which is unavailable to this code @@ -1248,9 +1240,7 @@ ncm_bind(struct usb_configuration *c, struct usb_function *f) return 0; fail: - if (f->descriptors) - usb_free_descriptors(f->descriptors); - + usb_free_all_descriptors(f); if (ncm->notify_req) { kfree(ncm->notify_req->buf); usb_ep_free_request(ncm->notify, ncm->notify_req); @@ -1259,9 +1249,9 @@ fail: /* we might as well release our claims on endpoints */ if (ncm->notify) ncm->notify->driver_data = NULL; - if (ncm->port.out_ep->desc) + if (ncm->port.out_ep) ncm->port.out_ep->driver_data = NULL; - if (ncm->port.in_ep->desc) + if (ncm->port.in_ep) ncm->port.in_ep->driver_data = NULL; ERROR(cdev, "%s: can't bind, err %d\n", f->name, status); @@ -1276,14 +1266,12 @@ ncm_unbind(struct usb_configuration *c, struct usb_function *f) DBG(c->cdev, "ncm unbind\n"); - if (gadget_is_dualspeed(c->cdev->gadget)) - usb_free_descriptors(f->hs_descriptors); - usb_free_descriptors(f->descriptors); + ncm_string_defs[0].id = 0; + usb_free_all_descriptors(f); kfree(ncm->notify_req->buf); usb_ep_free_request(ncm->notify, ncm->notify_req); - ncm_string_defs[1].s = NULL; kfree(ncm); } @@ -1307,37 +1295,19 @@ int __init ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) if (!can_support_ecm(c->cdev->gadget) || !ethaddr) return -EINVAL; - /* maybe allocate device-global string IDs */ if (ncm_string_defs[0].id == 0) { - - /* control interface label */ - status = usb_string_id(c->cdev); + status = usb_string_ids_tab(c->cdev, ncm_string_defs); if (status < 0) return status; - ncm_string_defs[STRING_CTRL_IDX].id = status; - ncm_control_intf.iInterface = status; + ncm_control_intf.iInterface = + ncm_string_defs[STRING_CTRL_IDX].id; - /* data interface label */ - status = usb_string_id(c->cdev); - if (status < 0) - return status; - ncm_string_defs[STRING_DATA_IDX].id = status; + status = ncm_string_defs[STRING_DATA_IDX].id; ncm_data_nop_intf.iInterface = status; ncm_data_intf.iInterface = status; - /* MAC address */ - status = usb_string_id(c->cdev); - if (status < 0) - return status; - ncm_string_defs[STRING_MAC_IDX].id = status; - ecm_desc.iMACAddress = status; - - /* IAD */ - status = usb_string_id(c->cdev); - if (status < 0) - return status; - ncm_string_defs[STRING_IAD_IDX].id = status; - ncm_iad_desc.iFunction = status; + ecm_desc.iMACAddress = ncm_string_defs[STRING_MAC_IDX].id; + ncm_iad_desc.iFunction = ncm_string_defs[STRING_IAD_IDX].id; } /* allocate and initialize one new instance */ @@ -1347,7 +1317,7 @@ int __init ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) /* export host's Ethernet address in CDC format */ snprintf(ncm->ethaddr, sizeof ncm->ethaddr, "%pm", ethaddr); - ncm_string_defs[1].s = ncm->ethaddr; + ncm_string_defs[STRING_MAC_IDX].s = ncm->ethaddr; spin_lock_init(&ncm->lock); ncm_reset_values(ncm); @@ -1367,9 +1337,7 @@ int __init ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) ncm->port.unwrap = ncm_unwrap_ntb; status = usb_add_function(c, &ncm->port.func); - if (status) { - ncm_string_defs[1].s = NULL; + if (status) kfree(ncm); - } return status; } diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c index 5f400f66aa9..36a004563b8 100644 --- a/drivers/usb/gadget/f_obex.c +++ b/drivers/usb/gadget/f_obex.c @@ -331,23 +331,19 @@ obex_bind(struct usb_configuration *c, struct usb_function *f) obex->port.out = ep; ep->driver_data = cdev; /* claim */ - /* copy descriptors, and track endpoint copies */ - f->descriptors = usb_copy_descriptors(fs_function); - /* support all relevant hardware speeds... we expect that when * hardware is dual speed, all bulk-capable endpoints work at * both speeds */ - if (gadget_is_dualspeed(c->cdev->gadget)) { - obex_hs_ep_in_desc.bEndpointAddress = - obex_fs_ep_in_desc.bEndpointAddress; - obex_hs_ep_out_desc.bEndpointAddress = - obex_fs_ep_out_desc.bEndpointAddress; + obex_hs_ep_in_desc.bEndpointAddress = + obex_fs_ep_in_desc.bEndpointAddress; + obex_hs_ep_out_desc.bEndpointAddress = + obex_fs_ep_out_desc.bEndpointAddress; - /* copy descriptors, and track endpoint copies */ - f->hs_descriptors = usb_copy_descriptors(hs_function); - } + status = usb_assign_descriptors(f, fs_function, hs_function, NULL); + if (status) + goto fail; /* Avoid letting this gadget enumerate until the userspace * OBEX server is active. @@ -368,6 +364,7 @@ obex_bind(struct usb_configuration *c, struct usb_function *f) return 0; fail: + usb_free_all_descriptors(f); /* we might as well release our claims on endpoints */ if (obex->port.out) obex->port.out->driver_data = NULL; @@ -382,9 +379,8 @@ fail: static void obex_unbind(struct usb_configuration *c, struct usb_function *f) { - if (gadget_is_dualspeed(c->cdev->gadget)) - usb_free_descriptors(f->hs_descriptors); - usb_free_descriptors(f->descriptors); + obex_string_defs[OBEX_CTRL_IDX].id = 0; + usb_free_all_descriptors(f); kfree(func_to_obex(f)); } @@ -410,10 +406,6 @@ static inline bool can_support_obex(struct usb_configuration *c) * Context: single threaded during gadget setup * * Returns zero on success, else negative errno. - * - * Caller must have called @gserial_setup() with enough ports to - * handle all the ones it binds. Caller is also responsible - * for calling @gserial_cleanup() before module unload. */ int __init obex_bind_config(struct usb_configuration *c, u8 port_num) { @@ -423,22 +415,16 @@ int __init obex_bind_config(struct usb_configuration *c, u8 port_num) if (!can_support_obex(c)) return -EINVAL; - /* maybe allocate device-global string IDs, and patch descriptors */ if (obex_string_defs[OBEX_CTRL_IDX].id == 0) { - status = usb_string_id(c->cdev); - if (status < 0) - return status; - obex_string_defs[OBEX_CTRL_IDX].id = status; - - obex_control_intf.iInterface = status; - - status = usb_string_id(c->cdev); + status = usb_string_ids_tab(c->cdev, obex_string_defs); if (status < 0) return status; - obex_string_defs[OBEX_DATA_IDX].id = status; + obex_control_intf.iInterface = + obex_string_defs[OBEX_CTRL_IDX].id; - obex_data_nop_intf.iInterface = - obex_data_intf.iInterface = status; + status = obex_string_defs[OBEX_DATA_IDX].id; + obex_data_nop_intf.iInterface = status; + obex_data_intf.iInterface = status; } /* allocate and initialize one new instance */ diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c index 8ee9268fe25..b21ab558b6c 100644 --- a/drivers/usb/gadget/f_phonet.c +++ b/drivers/usb/gadget/f_phonet.c @@ -515,14 +515,14 @@ int pn_bind(struct usb_configuration *c, struct usb_function *f) fp->in_ep = ep; ep->driver_data = fp; /* Claim */ - pn_hs_sink_desc.bEndpointAddress = - pn_fs_sink_desc.bEndpointAddress; - pn_hs_source_desc.bEndpointAddress = - pn_fs_source_desc.bEndpointAddress; + pn_hs_sink_desc.bEndpointAddress = pn_fs_sink_desc.bEndpointAddress; + pn_hs_source_desc.bEndpointAddress = pn_fs_source_desc.bEndpointAddress; /* Do not try to bind Phonet twice... */ - fp->function.descriptors = fs_pn_function; - fp->function.hs_descriptors = hs_pn_function; + status = usb_assign_descriptors(f, fs_pn_function, hs_pn_function, + NULL); + if (status) + goto err; /* Incoming USB requests */ status = -ENOMEM; @@ -531,7 +531,7 @@ int pn_bind(struct usb_configuration *c, struct usb_function *f) req = usb_ep_alloc_request(fp->out_ep, GFP_KERNEL); if (!req) - goto err; + goto err_req; req->complete = pn_rx_complete; fp->out_reqv[i] = req; @@ -540,14 +540,18 @@ int pn_bind(struct usb_configuration *c, struct usb_function *f) /* Outgoing USB requests */ fp->in_req = usb_ep_alloc_request(fp->in_ep, GFP_KERNEL); if (!fp->in_req) - goto err; + goto err_req; INFO(cdev, "USB CDC Phonet function\n"); INFO(cdev, "using %s, OUT %s, IN %s\n", cdev->gadget->name, fp->out_ep->name, fp->in_ep->name); return 0; +err_req: + for (i = 0; i < phonet_rxq_size && fp->out_reqv[i]; i++) + usb_ep_free_request(fp->out_ep, fp->out_reqv[i]); err: + usb_free_all_descriptors(f); if (fp->out_ep) fp->out_ep->driver_data = NULL; if (fp->in_ep) @@ -569,6 +573,7 @@ pn_unbind(struct usb_configuration *c, struct usb_function *f) if (fp->out_reqv[i]) usb_ep_free_request(fp->out_ep, fp->out_reqv[i]); + usb_free_all_descriptors(f); kfree(fp); } diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index b1681e45aca..71beeb83355 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -101,7 +101,7 @@ static unsigned int bitrate(struct usb_gadget *g) /* */ -#define LOG2_STATUS_INTERVAL_MSEC 5 /* 1 << 5 == 32 msec */ +#define RNDIS_STATUS_INTERVAL_MS 32 #define STATUS_BYTECOUNT 8 /* 8 bytes data */ @@ -190,7 +190,7 @@ static struct usb_endpoint_descriptor fs_notify_desc = { .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, .wMaxPacketSize = cpu_to_le16(STATUS_BYTECOUNT), - .bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC, + .bInterval = RNDIS_STATUS_INTERVAL_MS, }; static struct usb_endpoint_descriptor fs_in_desc = { @@ -236,7 +236,7 @@ static struct usb_endpoint_descriptor hs_notify_desc = { .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, .wMaxPacketSize = cpu_to_le16(STATUS_BYTECOUNT), - .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4, + .bInterval = USB_MS_TO_HS_INTERVAL(RNDIS_STATUS_INTERVAL_MS) }; static struct usb_endpoint_descriptor hs_in_desc = { @@ -284,7 +284,7 @@ static struct usb_endpoint_descriptor ss_notify_desc = { .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, .wMaxPacketSize = cpu_to_le16(STATUS_BYTECOUNT), - .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4, + .bInterval = USB_MS_TO_HS_INTERVAL(RNDIS_STATUS_INTERVAL_MS) }; static struct usb_ss_ep_comp_descriptor ss_intr_comp_desc = { @@ -722,42 +722,22 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f) rndis->notify_req->context = rndis; rndis->notify_req->complete = rndis_response_complete; - /* copy descriptors, and track endpoint copies */ - f->descriptors = usb_copy_descriptors(eth_fs_function); - if (!f->descriptors) - goto fail; - /* support all relevant hardware speeds... we expect that when * hardware is dual speed, all bulk-capable endpoints work at * both speeds */ - if (gadget_is_dualspeed(c->cdev->gadget)) { - hs_in_desc.bEndpointAddress = - fs_in_desc.bEndpointAddress; - hs_out_desc.bEndpointAddress = - fs_out_desc.bEndpointAddress; - hs_notify_desc.bEndpointAddress = - fs_notify_desc.bEndpointAddress; - - /* copy descriptors, and track endpoint copies */ - f->hs_descriptors = usb_copy_descriptors(eth_hs_function); - if (!f->hs_descriptors) - goto fail; - } + hs_in_desc.bEndpointAddress = fs_in_desc.bEndpointAddress; + hs_out_desc.bEndpointAddress = fs_out_desc.bEndpointAddress; + hs_notify_desc.bEndpointAddress = fs_notify_desc.bEndpointAddress; - if (gadget_is_superspeed(c->cdev->gadget)) { - ss_in_desc.bEndpointAddress = - fs_in_desc.bEndpointAddress; - ss_out_desc.bEndpointAddress = - fs_out_desc.bEndpointAddress; - ss_notify_desc.bEndpointAddress = - fs_notify_desc.bEndpointAddress; - - /* copy descriptors, and track endpoint copies */ - f->ss_descriptors = usb_copy_descriptors(eth_ss_function); - if (!f->ss_descriptors) - goto fail; - } + ss_in_desc.bEndpointAddress = fs_in_desc.bEndpointAddress; + ss_out_desc.bEndpointAddress = fs_out_desc.bEndpointAddress; + ss_notify_desc.bEndpointAddress = fs_notify_desc.bEndpointAddress; + + status = usb_assign_descriptors(f, eth_fs_function, eth_hs_function, + eth_ss_function); + if (status) + goto fail; rndis->port.open = rndis_open; rndis->port.close = rndis_close; @@ -788,12 +768,7 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f) return 0; fail: - if (gadget_is_superspeed(c->cdev->gadget) && f->ss_descriptors) - usb_free_descriptors(f->ss_descriptors); - if (gadget_is_dualspeed(c->cdev->gadget) && f->hs_descriptors) - usb_free_descriptors(f->hs_descriptors); - if (f->descriptors) - usb_free_descriptors(f->descriptors); + usb_free_all_descriptors(f); if (rndis->notify_req) { kfree(rndis->notify_req->buf); @@ -803,9 +778,9 @@ fail: /* we might as well release our claims on endpoints */ if (rndis->notify) rndis->notify->driver_data = NULL; - if (rndis->port.out_ep->desc) + if (rndis->port.out_ep) rndis->port.out_ep->driver_data = NULL; - if (rndis->port.in_ep->desc) + if (rndis->port.in_ep) rndis->port.in_ep->driver_data = NULL; ERROR(cdev, "%s: can't bind, err %d\n", f->name, status); @@ -820,13 +795,9 @@ rndis_unbind(struct usb_configuration *c, struct usb_function *f) rndis_deregister(rndis->config); rndis_exit(); - rndis_string_defs[0].id = 0; - if (gadget_is_superspeed(c->cdev->gadget)) - usb_free_descriptors(f->ss_descriptors); - if (gadget_is_dualspeed(c->cdev->gadget)) - usb_free_descriptors(f->hs_descriptors); - usb_free_descriptors(f->descriptors); + rndis_string_defs[0].id = 0; + usb_free_all_descriptors(f); kfree(rndis->notify_req->buf); usb_ep_free_request(rndis->notify, rndis->notify_req); @@ -851,34 +822,19 @@ rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], if (!can_support_rndis(c) || !ethaddr) return -EINVAL; - /* maybe allocate device-global string IDs */ if (rndis_string_defs[0].id == 0) { - /* ... and setup RNDIS itself */ status = rndis_init(); if (status < 0) return status; - /* control interface label */ - status = usb_string_id(c->cdev); - if (status < 0) + status = usb_string_ids_tab(c->cdev, rndis_string_defs); + if (status) return status; - rndis_string_defs[0].id = status; - rndis_control_intf.iInterface = status; - /* data interface label */ - status = usb_string_id(c->cdev); - if (status < 0) - return status; - rndis_string_defs[1].id = status; - rndis_data_intf.iInterface = status; - - /* IAD iFunction label */ - status = usb_string_id(c->cdev); - if (status < 0) - return status; - rndis_string_defs[2].id = status; - rndis_iad_descriptor.iFunction = status; + rndis_control_intf.iInterface = rndis_string_defs[0].id; + rndis_data_intf.iInterface = rndis_string_defs[1].id; + rndis_iad_descriptor.iFunction = rndis_string_defs[2].id; } /* allocate and initialize one new instance */ diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c index 07197d63d9b..da33cfb3031 100644 --- a/drivers/usb/gadget/f_serial.c +++ b/drivers/usb/gadget/f_serial.c @@ -213,34 +213,20 @@ gser_bind(struct usb_configuration *c, struct usb_function *f) gser->port.out = ep; ep->driver_data = cdev; /* claim */ - /* copy descriptors, and track endpoint copies */ - f->descriptors = usb_copy_descriptors(gser_fs_function); - /* support all relevant hardware speeds... we expect that when * hardware is dual speed, all bulk-capable endpoints work at * both speeds */ - if (gadget_is_dualspeed(c->cdev->gadget)) { - gser_hs_in_desc.bEndpointAddress = - gser_fs_in_desc.bEndpointAddress; - gser_hs_out_desc.bEndpointAddress = - gser_fs_out_desc.bEndpointAddress; - - /* copy descriptors, and track endpoint copies */ - f->hs_descriptors = usb_copy_descriptors(gser_hs_function); - } - if (gadget_is_superspeed(c->cdev->gadget)) { - gser_ss_in_desc.bEndpointAddress = - gser_fs_in_desc.bEndpointAddress; - gser_ss_out_desc.bEndpointAddress = - gser_fs_out_desc.bEndpointAddress; - - /* copy descriptors, and track endpoint copies */ - f->ss_descriptors = usb_copy_descriptors(gser_ss_function); - if (!f->ss_descriptors) - goto fail; - } + gser_hs_in_desc.bEndpointAddress = gser_fs_in_desc.bEndpointAddress; + gser_hs_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress; + + gser_ss_in_desc.bEndpointAddress = gser_fs_in_desc.bEndpointAddress; + gser_ss_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress; + status = usb_assign_descriptors(f, gser_fs_function, gser_hs_function, + gser_ss_function); + if (status) + goto fail; DBG(cdev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n", gser->port_num, gadget_is_superspeed(c->cdev->gadget) ? "super" : @@ -263,11 +249,7 @@ fail: static void gser_unbind(struct usb_configuration *c, struct usb_function *f) { - if (gadget_is_dualspeed(c->cdev->gadget)) - usb_free_descriptors(f->hs_descriptors); - if (gadget_is_superspeed(c->cdev->gadget)) - usb_free_descriptors(f->ss_descriptors); - usb_free_descriptors(f->descriptors); + usb_free_all_descriptors(f); kfree(func_to_gser(f)); } @@ -278,10 +260,6 @@ gser_unbind(struct usb_configuration *c, struct usb_function *f) * Context: single threaded during gadget setup * * Returns zero on success, else negative errno. - * - * Caller must have called @gserial_setup() with enough ports to - * handle all the ones it binds. Caller is also responsible - * for calling @gserial_cleanup() before module unload. */ int __init gser_bind_config(struct usb_configuration *c, u8 port_num) { diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c index 3c126fde6e7..41adf3ef96c 100644 --- a/drivers/usb/gadget/f_sourcesink.c +++ b/drivers/usb/gadget/f_sourcesink.c @@ -16,11 +16,12 @@ #include <linux/kernel.h> #include <linux/device.h> #include <linux/module.h> +#include <linux/usb/composite.h> +#include <linux/err.h> #include "g_zero.h" #include "gadget_chips.h" - /* * SOURCE/SINK FUNCTION ... a primary testing vehicle for USB peripheral * controller drivers. @@ -62,24 +63,11 @@ static inline struct f_sourcesink *func_to_ss(struct usb_function *f) } static unsigned pattern; -module_param(pattern, uint, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(pattern, "0 = all zeroes, 1 = mod63, 2 = none"); - -static unsigned isoc_interval = 4; -module_param(isoc_interval, uint, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(isoc_interval, "1 - 16"); - -static unsigned isoc_maxpacket = 1024; -module_param(isoc_maxpacket, uint, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(isoc_maxpacket, "0 - 1023 (fs), 0 - 1024 (hs/ss)"); - +static unsigned isoc_interval; +static unsigned isoc_maxpacket; static unsigned isoc_mult; -module_param(isoc_mult, uint, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(isoc_mult, "0 - 2 (hs/ss only)"); - static unsigned isoc_maxburst; -module_param(isoc_maxburst, uint, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(isoc_maxburst, "0 - 15 (ss only)"); +static unsigned buflen; /*-------------------------------------------------------------------------*/ @@ -313,12 +301,63 @@ static struct usb_gadget_strings *sourcesink_strings[] = { /*-------------------------------------------------------------------------*/ -static int __init +struct usb_request *alloc_ep_req(struct usb_ep *ep, int len) +{ + struct usb_request *req; + + req = usb_ep_alloc_request(ep, GFP_ATOMIC); + if (req) { + if (len) + req->length = len; + else + req->length = buflen; + req->buf = kmalloc(req->length, GFP_ATOMIC); + if (!req->buf) { + usb_ep_free_request(ep, req); + req = NULL; + } + } + return req; +} + +void free_ep_req(struct usb_ep *ep, struct usb_request *req) +{ + kfree(req->buf); + usb_ep_free_request(ep, req); +} + +static void disable_ep(struct usb_composite_dev *cdev, struct usb_ep *ep) +{ + int value; + + if (ep->driver_data) { + value = usb_ep_disable(ep); + if (value < 0) + DBG(cdev, "disable %s --> %d\n", + ep->name, value); + ep->driver_data = NULL; + } +} + +void disable_endpoints(struct usb_composite_dev *cdev, + struct usb_ep *in, struct usb_ep *out, + struct usb_ep *iso_in, struct usb_ep *iso_out) +{ + disable_ep(cdev, in); + disable_ep(cdev, out); + if (iso_in) + disable_ep(cdev, iso_in); + if (iso_out) + disable_ep(cdev, iso_out); +} + +static int sourcesink_bind(struct usb_configuration *c, struct usb_function *f) { struct usb_composite_dev *cdev = c->cdev; struct f_sourcesink *ss = func_to_ss(f); int id; + int ret; /* allocate interface ID(s) */ id = usb_interface_id(c, f); @@ -387,64 +426,57 @@ no_iso: isoc_maxpacket = 1024; /* support high speed hardware */ - if (gadget_is_dualspeed(c->cdev->gadget)) { - hs_source_desc.bEndpointAddress = - fs_source_desc.bEndpointAddress; - hs_sink_desc.bEndpointAddress = - fs_sink_desc.bEndpointAddress; + hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress; + hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress; - /* - * Fill in the HS isoc descriptors from the module parameters. - * We assume that the user knows what they are doing and won't - * give parameters that their UDC doesn't support. - */ - hs_iso_source_desc.wMaxPacketSize = isoc_maxpacket; - hs_iso_source_desc.wMaxPacketSize |= isoc_mult << 11; - hs_iso_source_desc.bInterval = isoc_interval; - hs_iso_source_desc.bEndpointAddress = - fs_iso_source_desc.bEndpointAddress; - - hs_iso_sink_desc.wMaxPacketSize = isoc_maxpacket; - hs_iso_sink_desc.wMaxPacketSize |= isoc_mult << 11; - hs_iso_sink_desc.bInterval = isoc_interval; - hs_iso_sink_desc.bEndpointAddress = - fs_iso_sink_desc.bEndpointAddress; - - f->hs_descriptors = hs_source_sink_descs; - } + /* + * Fill in the HS isoc descriptors from the module parameters. + * We assume that the user knows what they are doing and won't + * give parameters that their UDC doesn't support. + */ + hs_iso_source_desc.wMaxPacketSize = isoc_maxpacket; + hs_iso_source_desc.wMaxPacketSize |= isoc_mult << 11; + hs_iso_source_desc.bInterval = isoc_interval; + hs_iso_source_desc.bEndpointAddress = + fs_iso_source_desc.bEndpointAddress; + + hs_iso_sink_desc.wMaxPacketSize = isoc_maxpacket; + hs_iso_sink_desc.wMaxPacketSize |= isoc_mult << 11; + hs_iso_sink_desc.bInterval = isoc_interval; + hs_iso_sink_desc.bEndpointAddress = fs_iso_sink_desc.bEndpointAddress; /* support super speed hardware */ - if (gadget_is_superspeed(c->cdev->gadget)) { - ss_source_desc.bEndpointAddress = - fs_source_desc.bEndpointAddress; - ss_sink_desc.bEndpointAddress = - fs_sink_desc.bEndpointAddress; + ss_source_desc.bEndpointAddress = + fs_source_desc.bEndpointAddress; + ss_sink_desc.bEndpointAddress = + fs_sink_desc.bEndpointAddress; - /* - * Fill in the SS isoc descriptors from the module parameters. - * We assume that the user knows what they are doing and won't - * give parameters that their UDC doesn't support. - */ - ss_iso_source_desc.wMaxPacketSize = isoc_maxpacket; - ss_iso_source_desc.bInterval = isoc_interval; - ss_iso_source_comp_desc.bmAttributes = isoc_mult; - ss_iso_source_comp_desc.bMaxBurst = isoc_maxburst; - ss_iso_source_comp_desc.wBytesPerInterval = - isoc_maxpacket * (isoc_mult + 1) * (isoc_maxburst + 1); - ss_iso_source_desc.bEndpointAddress = - fs_iso_source_desc.bEndpointAddress; - - ss_iso_sink_desc.wMaxPacketSize = isoc_maxpacket; - ss_iso_sink_desc.bInterval = isoc_interval; - ss_iso_sink_comp_desc.bmAttributes = isoc_mult; - ss_iso_sink_comp_desc.bMaxBurst = isoc_maxburst; - ss_iso_sink_comp_desc.wBytesPerInterval = - isoc_maxpacket * (isoc_mult + 1) * (isoc_maxburst + 1); - ss_iso_sink_desc.bEndpointAddress = - fs_iso_sink_desc.bEndpointAddress; - - f->ss_descriptors = ss_source_sink_descs; - } + /* + * Fill in the SS isoc descriptors from the module parameters. + * We assume that the user knows what they are doing and won't + * give parameters that their UDC doesn't support. + */ + ss_iso_source_desc.wMaxPacketSize = isoc_maxpacket; + ss_iso_source_desc.bInterval = isoc_interval; + ss_iso_source_comp_desc.bmAttributes = isoc_mult; + ss_iso_source_comp_desc.bMaxBurst = isoc_maxburst; + ss_iso_source_comp_desc.wBytesPerInterval = + isoc_maxpacket * (isoc_mult + 1) * (isoc_maxburst + 1); + ss_iso_source_desc.bEndpointAddress = + fs_iso_source_desc.bEndpointAddress; + + ss_iso_sink_desc.wMaxPacketSize = isoc_maxpacket; + ss_iso_sink_desc.bInterval = isoc_interval; + ss_iso_sink_comp_desc.bmAttributes = isoc_mult; + ss_iso_sink_comp_desc.bMaxBurst = isoc_maxburst; + ss_iso_sink_comp_desc.wBytesPerInterval = + isoc_maxpacket * (isoc_mult + 1) * (isoc_maxburst + 1); + ss_iso_sink_desc.bEndpointAddress = fs_iso_sink_desc.bEndpointAddress; + + ret = usb_assign_descriptors(f, fs_source_sink_descs, + hs_source_sink_descs, ss_source_sink_descs); + if (ret) + return ret; DBG(cdev, "%s speed %s: IN/%s, OUT/%s, ISO-IN/%s, ISO-OUT/%s\n", (gadget_is_superspeed(c->cdev->gadget) ? "super" : @@ -456,8 +488,9 @@ no_iso: } static void -sourcesink_unbind(struct usb_configuration *c, struct usb_function *f) +sourcesink_free_func(struct usb_function *f) { + usb_free_all_descriptors(f); kfree(func_to_ss(f)); } @@ -536,8 +569,7 @@ static void source_sink_complete(struct usb_ep *ep, struct usb_request *req) check_read_data(ss, req); if (pattern != 2) memset(req->buf, 0x55, req->length); - } else - reinit_write_data(ep, req); + } break; /* this endpoint is normally active while we're configured */ @@ -763,32 +795,10 @@ static void sourcesink_disable(struct usb_function *f) /*-------------------------------------------------------------------------*/ -static int __init sourcesink_bind_config(struct usb_configuration *c) -{ - struct f_sourcesink *ss; - int status; - - ss = kzalloc(sizeof *ss, GFP_KERNEL); - if (!ss) - return -ENOMEM; - - ss->function.name = "source/sink"; - ss->function.descriptors = fs_source_sink_descs; - ss->function.bind = sourcesink_bind; - ss->function.unbind = sourcesink_unbind; - ss->function.set_alt = sourcesink_set_alt; - ss->function.get_alt = sourcesink_get_alt; - ss->function.disable = sourcesink_disable; - - status = usb_add_function(c, &ss->function); - if (status) - kfree(ss); - return status; -} - -static int sourcesink_setup(struct usb_configuration *c, +static int sourcesink_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) { + struct usb_configuration *c = f->config; struct usb_request *req = c->cdev->req; int value = -EOPNOTSUPP; u16 w_index = le16_to_cpu(ctrl->wIndex); @@ -857,42 +867,76 @@ unknown: return value; } -static struct usb_configuration sourcesink_driver = { - .label = "source/sink", - .strings = sourcesink_strings, - .setup = sourcesink_setup, - .bConfigurationValue = 3, - .bmAttributes = USB_CONFIG_ATT_SELFPOWER, - /* .iConfiguration = DYNAMIC */ -}; - -/** - * sourcesink_add - add a source/sink testing configuration to a device - * @cdev: the device to support the configuration - */ -int __init sourcesink_add(struct usb_composite_dev *cdev, bool autoresume) +static struct usb_function *source_sink_alloc_func( + struct usb_function_instance *fi) { - int id; + struct f_sourcesink *ss; + struct f_ss_opts *ss_opts; - /* allocate string ID(s) */ - id = usb_string_id(cdev); - if (id < 0) - return id; - strings_sourcesink[0].id = id; + ss = kzalloc(sizeof(*ss), GFP_KERNEL); + if (!ss) + return NULL; + + ss_opts = container_of(fi, struct f_ss_opts, func_inst); + pattern = ss_opts->pattern; + isoc_interval = ss_opts->isoc_interval; + isoc_maxpacket = ss_opts->isoc_maxpacket; + isoc_mult = ss_opts->isoc_mult; + isoc_maxburst = ss_opts->isoc_maxburst; + buflen = ss_opts->bulk_buflen; - source_sink_intf_alt0.iInterface = id; - source_sink_intf_alt1.iInterface = id; - sourcesink_driver.iConfiguration = id; + ss->function.name = "source/sink"; + ss->function.bind = sourcesink_bind; + ss->function.set_alt = sourcesink_set_alt; + ss->function.get_alt = sourcesink_get_alt; + ss->function.disable = sourcesink_disable; + ss->function.setup = sourcesink_setup; + ss->function.strings = sourcesink_strings; - /* support autoresume for remote wakeup testing */ - if (autoresume) - sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + ss->function.free_func = sourcesink_free_func; - /* support OTG systems */ - if (gadget_is_otg(cdev->gadget)) { - sourcesink_driver.descriptors = otg_desc; - sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; - } + return &ss->function; +} - return usb_add_config(cdev, &sourcesink_driver, sourcesink_bind_config); +static void acm_free_instance(struct usb_function_instance *fi) +{ + struct f_ss_opts *ss_opts; + + ss_opts = container_of(fi, struct f_ss_opts, func_inst); + kfree(ss_opts); } + +static struct usb_function_instance *source_sink_alloc_inst(void) +{ + struct f_ss_opts *ss_opts; + + ss_opts = kzalloc(sizeof(*ss_opts), GFP_KERNEL); + if (!ss_opts) + return ERR_PTR(-ENOMEM); + ss_opts->func_inst.free_func_inst = acm_free_instance; + return &ss_opts->func_inst; +} +DECLARE_USB_FUNCTION(SourceSink, source_sink_alloc_inst, + source_sink_alloc_func); + +static int __init sslb_modinit(void) +{ + int ret; + + ret = usb_function_register(&SourceSinkusb_func); + if (ret) + return ret; + ret = lb_modinit(); + if (ret) + usb_function_unregister(&SourceSinkusb_func); + return ret; +} +static void __exit sslb_modexit(void) +{ + usb_function_unregister(&SourceSinkusb_func); + lb_modexit(); +} +module_init(sslb_modinit); +module_exit(sslb_modexit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c index 4060c0bd978..f172bd152fb 100644 --- a/drivers/usb/gadget/f_subset.c +++ b/drivers/usb/gadget/f_subset.c @@ -236,7 +236,7 @@ static struct usb_descriptor_header *ss_eth_function[] = { static struct usb_string geth_string_defs[] = { [0].s = "CDC Ethernet Subset/SAFE", - [1].s = NULL /* DYNAMIC */, + [1].s = "", { } /* end of list */ }; @@ -319,38 +319,22 @@ geth_bind(struct usb_configuration *c, struct usb_function *f) geth->port.out_ep = ep; ep->driver_data = cdev; /* claim */ - /* copy descriptors, and track endpoint copies */ - f->descriptors = usb_copy_descriptors(fs_eth_function); - if (!f->descriptors) - goto fail; - /* support all relevant hardware speeds... we expect that when * hardware is dual speed, all bulk-capable endpoints work at * both speeds */ - if (gadget_is_dualspeed(c->cdev->gadget)) { - hs_subset_in_desc.bEndpointAddress = - fs_subset_in_desc.bEndpointAddress; - hs_subset_out_desc.bEndpointAddress = - fs_subset_out_desc.bEndpointAddress; - - /* copy descriptors, and track endpoint copies */ - f->hs_descriptors = usb_copy_descriptors(hs_eth_function); - if (!f->hs_descriptors) - goto fail; - } + hs_subset_in_desc.bEndpointAddress = fs_subset_in_desc.bEndpointAddress; + hs_subset_out_desc.bEndpointAddress = + fs_subset_out_desc.bEndpointAddress; - if (gadget_is_superspeed(c->cdev->gadget)) { - ss_subset_in_desc.bEndpointAddress = - fs_subset_in_desc.bEndpointAddress; - ss_subset_out_desc.bEndpointAddress = - fs_subset_out_desc.bEndpointAddress; + ss_subset_in_desc.bEndpointAddress = fs_subset_in_desc.bEndpointAddress; + ss_subset_out_desc.bEndpointAddress = + fs_subset_out_desc.bEndpointAddress; - /* copy descriptors, and track endpoint copies */ - f->ss_descriptors = usb_copy_descriptors(ss_eth_function); - if (!f->ss_descriptors) - goto fail; - } + status = usb_assign_descriptors(f, fs_eth_function, hs_eth_function, + ss_eth_function); + if (status) + goto fail; /* NOTE: all that is done without knowing or caring about * the network link ... which is unavailable to this code @@ -364,15 +348,11 @@ geth_bind(struct usb_configuration *c, struct usb_function *f) return 0; fail: - if (f->descriptors) - usb_free_descriptors(f->descriptors); - if (f->hs_descriptors) - usb_free_descriptors(f->hs_descriptors); - + usb_free_all_descriptors(f); /* we might as well release our claims on endpoints */ - if (geth->port.out_ep->desc) + if (geth->port.out_ep) geth->port.out_ep->driver_data = NULL; - if (geth->port.in_ep->desc) + if (geth->port.in_ep) geth->port.in_ep->driver_data = NULL; ERROR(cdev, "%s: can't bind, err %d\n", f->name, status); @@ -383,12 +363,8 @@ fail: static void geth_unbind(struct usb_configuration *c, struct usb_function *f) { - if (gadget_is_superspeed(c->cdev->gadget)) - usb_free_descriptors(f->ss_descriptors); - if (gadget_is_dualspeed(c->cdev->gadget)) - usb_free_descriptors(f->hs_descriptors); - usb_free_descriptors(f->descriptors); - geth_string_defs[1].s = NULL; + geth_string_defs[0].id = 0; + usb_free_all_descriptors(f); kfree(func_to_geth(f)); } @@ -414,20 +390,11 @@ int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) /* maybe allocate device-global string IDs */ if (geth_string_defs[0].id == 0) { - - /* interface label */ - status = usb_string_id(c->cdev); + status = usb_string_ids_tab(c->cdev, geth_string_defs); if (status < 0) return status; - geth_string_defs[0].id = status; - subset_data_intf.iInterface = status; - - /* MAC address */ - status = usb_string_id(c->cdev); - if (status < 0) - return status; - geth_string_defs[1].id = status; - ether_desc.iMACAddress = status; + subset_data_intf.iInterface = geth_string_defs[0].id; + ether_desc.iMACAddress = geth_string_defs[1].id; } /* allocate and initialize one new instance */ @@ -449,9 +416,7 @@ int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) geth->port.func.disable = geth_disable; status = usb_add_function(c, &geth->port.func); - if (status) { - geth_string_defs[1].s = NULL; + if (status) kfree(geth); - } return status; } diff --git a/drivers/usb/gadget/f_uac1.c b/drivers/usb/gadget/f_uac1.c index 1a5dcd5565e..fa8ea4ea00c 100644 --- a/drivers/usb/gadget/f_uac1.c +++ b/drivers/usb/gadget/f_uac1.c @@ -418,6 +418,7 @@ static int audio_get_intf_req(struct usb_function *f, req->context = audio; req->complete = f_audio_complete; + len = min_t(size_t, sizeof(value), len); memcpy(req->buf, &value, len); return len; @@ -630,7 +631,7 @@ f_audio_bind(struct usb_configuration *c, struct usb_function *f) struct usb_composite_dev *cdev = c->cdev; struct f_audio *audio = func_to_audio(f); int status; - struct usb_ep *ep; + struct usb_ep *ep = NULL; f_audio_build_desc(audio); @@ -659,22 +660,14 @@ f_audio_bind(struct usb_configuration *c, struct usb_function *f) status = -ENOMEM; /* copy descriptors, and track endpoint copies */ - f->descriptors = usb_copy_descriptors(f_audio_desc); - - /* - * support all relevant hardware speeds... we expect that when - * hardware is dual speed, all bulk-capable endpoints work at - * both speeds - */ - if (gadget_is_dualspeed(c->cdev->gadget)) { - c->highspeed = true; - f->hs_descriptors = usb_copy_descriptors(f_audio_desc); - } - + status = usb_assign_descriptors(f, f_audio_desc, f_audio_desc, NULL); + if (status) + goto fail; return 0; fail: - + if (ep) + ep->driver_data = NULL; return status; } @@ -683,8 +676,7 @@ f_audio_unbind(struct usb_configuration *c, struct usb_function *f) { struct f_audio *audio = func_to_audio(f); - usb_free_descriptors(f->descriptors); - usb_free_descriptors(f->hs_descriptors); + usb_free_all_descriptors(f); kfree(audio); } diff --git a/drivers/usb/gadget/f_uac2.c b/drivers/usb/gadget/f_uac2.c index d3c6cffccb7..c7468b6c07b 100644 --- a/drivers/usb/gadget/f_uac2.c +++ b/drivers/usb/gadget/f_uac2.c @@ -50,13 +50,6 @@ static int c_ssize = 2; module_param(c_ssize, uint, S_IRUGO); MODULE_PARM_DESC(c_ssize, "Capture Sample Size(bytes)"); -#define DMA_ADDR_INVALID (~(dma_addr_t)0) - -#define ALT_SET(x, a) do {(x) &= ~0xff; (x) |= (a); } while (0) -#define ALT_GET(x) ((x) & 0xff) -#define INTF_SET(x, i) do {(x) &= 0xff; (x) |= ((i) << 8); } while (0) -#define INTF_GET(x) ((x >> 8) & 0xff) - /* Keep everyone on toes */ #define USB_XFERS 2 @@ -144,8 +137,9 @@ static struct snd_pcm_hardware uac2_pcm_hardware = { }; struct audio_dev { - /* Currently active {Interface[15:8] | AltSettings[7:0]} */ - __u16 ac_alt, as_out_alt, as_in_alt; + u8 ac_intf, ac_alt; + u8 as_out_intf, as_out_alt; + u8 as_in_intf, as_in_alt; struct usb_ep *in_ep, *out_ep; struct usb_function func; @@ -266,19 +260,14 @@ static int uac2_pcm_trigger(struct snd_pcm_substream *substream, int cmd) { struct snd_uac2_chip *uac2 = snd_pcm_substream_chip(substream); - struct audio_dev *agdev = uac2_to_agdev(uac2); struct uac2_rtd_params *prm; unsigned long flags; - struct usb_ep *ep; int err = 0; - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - ep = agdev->in_ep; + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) prm = &uac2->p_prm; - } else { - ep = agdev->out_ep; + else prm = &uac2->c_prm; - } spin_lock_irqsave(&prm->lock, flags); @@ -408,7 +397,7 @@ static struct snd_pcm_ops uac2_pcm_ops = { .prepare = uac2_pcm_null, }; -static int __devinit snd_uac2_probe(struct platform_device *pdev) +static int snd_uac2_probe(struct platform_device *pdev) { struct snd_uac2_chip *uac2 = pdev_to_uac2(pdev); struct snd_card *card; @@ -526,32 +515,22 @@ enum { STR_AS_IN_ALT1, }; -static const char ifassoc[] = "Source/Sink"; -static const char ifctrl[] = "Topology Control"; static char clksrc_in[8]; static char clksrc_out[8]; -static const char usb_it[] = "USBH Out"; -static const char io_it[] = "USBD Out"; -static const char usb_ot[] = "USBH In"; -static const char io_ot[] = "USBD In"; -static const char out_alt0[] = "Playback Inactive"; -static const char out_alt1[] = "Playback Active"; -static const char in_alt0[] = "Capture Inactive"; -static const char in_alt1[] = "Capture Active"; static struct usb_string strings_fn[] = { - [STR_ASSOC].s = ifassoc, - [STR_IF_CTRL].s = ifctrl, + [STR_ASSOC].s = "Source/Sink", + [STR_IF_CTRL].s = "Topology Control", [STR_CLKSRC_IN].s = clksrc_in, [STR_CLKSRC_OUT].s = clksrc_out, - [STR_USB_IT].s = usb_it, - [STR_IO_IT].s = io_it, - [STR_USB_OT].s = usb_ot, - [STR_IO_OT].s = io_ot, - [STR_AS_OUT_ALT0].s = out_alt0, - [STR_AS_OUT_ALT1].s = out_alt1, - [STR_AS_IN_ALT0].s = in_alt0, - [STR_AS_IN_ALT1].s = in_alt1, + [STR_USB_IT].s = "USBH Out", + [STR_IO_IT].s = "USBD Out", + [STR_USB_OT].s = "USBH In", + [STR_IO_OT].s = "USBD In", + [STR_AS_OUT_ALT0].s = "Playback Inactive", + [STR_AS_OUT_ALT1].s = "Playback Active", + [STR_AS_IN_ALT0].s = "Capture Inactive", + [STR_AS_IN_ALT1].s = "Capture Active", { }, }; @@ -952,8 +931,8 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) return ret; } std_ac_if_desc.bInterfaceNumber = ret; - ALT_SET(agdev->ac_alt, 0); - INTF_SET(agdev->ac_alt, ret); + agdev->ac_intf = ret; + agdev->ac_alt = 0; ret = usb_interface_id(cfg, fn); if (ret < 0) { @@ -963,8 +942,8 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) } std_as_out_if0_desc.bInterfaceNumber = ret; std_as_out_if1_desc.bInterfaceNumber = ret; - ALT_SET(agdev->as_out_alt, 0); - INTF_SET(agdev->as_out_alt, ret); + agdev->as_out_intf = ret; + agdev->as_out_alt = 0; ret = usb_interface_id(cfg, fn); if (ret < 0) { @@ -974,19 +953,23 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) } std_as_in_if0_desc.bInterfaceNumber = ret; std_as_in_if1_desc.bInterfaceNumber = ret; - ALT_SET(agdev->as_in_alt, 0); - INTF_SET(agdev->as_in_alt, ret); + agdev->as_in_intf = ret; + agdev->as_in_alt = 0; agdev->out_ep = usb_ep_autoconfig(gadget, &fs_epout_desc); - if (!agdev->out_ep) + if (!agdev->out_ep) { dev_err(&uac2->pdev.dev, "%s:%d Error!\n", __func__, __LINE__); + goto err; + } agdev->out_ep->driver_data = agdev; agdev->in_ep = usb_ep_autoconfig(gadget, &fs_epin_desc); - if (!agdev->in_ep) + if (!agdev->in_ep) { dev_err(&uac2->pdev.dev, "%s:%d Error!\n", __func__, __LINE__); + goto err; + } agdev->in_ep->driver_data = agdev; hs_epout_desc.bEndpointAddress = fs_epout_desc.bEndpointAddress; @@ -994,9 +977,9 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) hs_epin_desc.bEndpointAddress = fs_epin_desc.bEndpointAddress; hs_epin_desc.wMaxPacketSize = fs_epin_desc.wMaxPacketSize; - fn->descriptors = usb_copy_descriptors(fs_audio_desc); - if (gadget_is_dualspeed(gadget)) - fn->hs_descriptors = usb_copy_descriptors(hs_audio_desc); + ret = usb_assign_descriptors(fn, fs_audio_desc, hs_audio_desc, NULL); + if (ret) + goto err; prm = &agdev->uac2.c_prm; prm->max_psize = hs_epout_desc.wMaxPacketSize; @@ -1005,6 +988,7 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) prm->max_psize = 0; dev_err(&uac2->pdev.dev, "%s:%d Error!\n", __func__, __LINE__); + goto err; } prm = &agdev->uac2.p_prm; @@ -1014,17 +998,28 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) prm->max_psize = 0; dev_err(&uac2->pdev.dev, "%s:%d Error!\n", __func__, __LINE__); + goto err; } - return alsa_uac2_init(agdev); + ret = alsa_uac2_init(agdev); + if (ret) + goto err; + return 0; +err: + kfree(agdev->uac2.p_prm.rbuf); + kfree(agdev->uac2.c_prm.rbuf); + usb_free_all_descriptors(fn); + if (agdev->in_ep) + agdev->in_ep->driver_data = NULL; + if (agdev->out_ep) + agdev->out_ep->driver_data = NULL; + return -EINVAL; } static void afunc_unbind(struct usb_configuration *cfg, struct usb_function *fn) { struct audio_dev *agdev = func_to_agdev(fn); - struct usb_composite_dev *cdev = cfg->cdev; - struct usb_gadget *gadget = cdev->gadget; struct uac2_rtd_params *prm; alsa_uac2_exit(agdev); @@ -1034,10 +1029,7 @@ afunc_unbind(struct usb_configuration *cfg, struct usb_function *fn) prm = &agdev->uac2.c_prm; kfree(prm->rbuf); - - if (gadget_is_dualspeed(gadget)) - usb_free_descriptors(fn->hs_descriptors); - usb_free_descriptors(fn->descriptors); + usb_free_all_descriptors(fn); if (agdev->in_ep) agdev->in_ep->driver_data = NULL; @@ -1064,7 +1056,7 @@ afunc_set_alt(struct usb_function *fn, unsigned intf, unsigned alt) return -EINVAL; } - if (intf == INTF_GET(agdev->ac_alt)) { + if (intf == agdev->ac_intf) { /* Control I/f has only 1 AltSetting - 0 */ if (alt) { dev_err(&uac2->pdev.dev, @@ -1074,16 +1066,16 @@ afunc_set_alt(struct usb_function *fn, unsigned intf, unsigned alt) return 0; } - if (intf == INTF_GET(agdev->as_out_alt)) { + if (intf == agdev->as_out_intf) { ep = agdev->out_ep; prm = &uac2->c_prm; config_ep_by_speed(gadget, fn, ep); - ALT_SET(agdev->as_out_alt, alt); - } else if (intf == INTF_GET(agdev->as_in_alt)) { + agdev->as_out_alt = alt; + } else if (intf == agdev->as_in_intf) { ep = agdev->in_ep; prm = &uac2->p_prm; config_ep_by_speed(gadget, fn, ep); - ALT_SET(agdev->as_in_alt, alt); + agdev->as_in_alt = alt; } else { dev_err(&uac2->pdev.dev, "%s:%d Error!\n", __func__, __LINE__); @@ -1117,7 +1109,6 @@ afunc_set_alt(struct usb_function *fn, unsigned intf, unsigned alt) prm->ureq[i].pp = prm; req->zero = 0; - req->dma = DMA_ADDR_INVALID; req->context = &prm->ureq[i]; req->length = prm->max_psize; req->complete = agdev_iso_complete; @@ -1136,12 +1127,12 @@ afunc_get_alt(struct usb_function *fn, unsigned intf) struct audio_dev *agdev = func_to_agdev(fn); struct snd_uac2_chip *uac2 = &agdev->uac2; - if (intf == INTF_GET(agdev->ac_alt)) - return ALT_GET(agdev->ac_alt); - else if (intf == INTF_GET(agdev->as_out_alt)) - return ALT_GET(agdev->as_out_alt); - else if (intf == INTF_GET(agdev->as_in_alt)) - return ALT_GET(agdev->as_in_alt); + if (intf == agdev->ac_intf) + return agdev->ac_alt; + else if (intf == agdev->as_out_intf) + return agdev->as_out_alt; + else if (intf == agdev->as_in_intf) + return agdev->as_in_alt; else dev_err(&uac2->pdev.dev, "%s:%d Invalid Interface %d!\n", @@ -1157,10 +1148,10 @@ afunc_disable(struct usb_function *fn) struct snd_uac2_chip *uac2 = &agdev->uac2; free_ep(&uac2->p_prm, agdev->in_ep); - ALT_SET(agdev->as_in_alt, 0); + agdev->as_in_alt = 0; free_ep(&uac2->c_prm, agdev->out_ep); - ALT_SET(agdev->as_out_alt, 0); + agdev->as_out_alt = 0; } static int @@ -1267,7 +1258,7 @@ setup_rq_inf(struct usb_function *fn, const struct usb_ctrlrequest *cr) u16 w_index = le16_to_cpu(cr->wIndex); u8 intf = w_index & 0xff; - if (intf != INTF_GET(agdev->ac_alt)) { + if (intf != agdev->ac_intf) { dev_err(&uac2->pdev.dev, "%s:%d Error!\n", __func__, __LINE__); return -EOPNOTSUPP; @@ -1316,7 +1307,7 @@ afunc_setup(struct usb_function *fn, const struct usb_ctrlrequest *cr) static int audio_bind_config(struct usb_configuration *cfg) { - int id, res; + int res; agdev_g = kzalloc(sizeof *agdev_g, GFP_KERNEL); if (agdev_g == NULL) { @@ -1324,89 +1315,21 @@ static int audio_bind_config(struct usb_configuration *cfg) return -ENOMEM; } - id = usb_string_id(cfg->cdev); - if (id < 0) - return id; - - strings_fn[STR_ASSOC].id = id; - iad_desc.iFunction = id, - - id = usb_string_id(cfg->cdev); - if (id < 0) - return id; - - strings_fn[STR_IF_CTRL].id = id; - std_ac_if_desc.iInterface = id, - - id = usb_string_id(cfg->cdev); - if (id < 0) - return id; - - strings_fn[STR_CLKSRC_IN].id = id; - in_clk_src_desc.iClockSource = id, - - id = usb_string_id(cfg->cdev); - if (id < 0) - return id; - - strings_fn[STR_CLKSRC_OUT].id = id; - out_clk_src_desc.iClockSource = id, - - id = usb_string_id(cfg->cdev); - if (id < 0) - return id; - - strings_fn[STR_USB_IT].id = id; - usb_out_it_desc.iTerminal = id, - - id = usb_string_id(cfg->cdev); - if (id < 0) - return id; - - strings_fn[STR_IO_IT].id = id; - io_in_it_desc.iTerminal = id; - - id = usb_string_id(cfg->cdev); - if (id < 0) - return id; - - strings_fn[STR_USB_OT].id = id; - usb_in_ot_desc.iTerminal = id; - - id = usb_string_id(cfg->cdev); - if (id < 0) - return id; - - strings_fn[STR_IO_OT].id = id; - io_out_ot_desc.iTerminal = id; - - id = usb_string_id(cfg->cdev); - if (id < 0) - return id; - - strings_fn[STR_AS_OUT_ALT0].id = id; - std_as_out_if0_desc.iInterface = id; - - id = usb_string_id(cfg->cdev); - if (id < 0) - return id; - - strings_fn[STR_AS_OUT_ALT1].id = id; - std_as_out_if1_desc.iInterface = id; - - id = usb_string_id(cfg->cdev); - if (id < 0) - return id; - - strings_fn[STR_AS_IN_ALT0].id = id; - std_as_in_if0_desc.iInterface = id; - - id = usb_string_id(cfg->cdev); - if (id < 0) - return id; - - strings_fn[STR_AS_IN_ALT1].id = id; - std_as_in_if1_desc.iInterface = id; + res = usb_string_ids_tab(cfg->cdev, strings_fn); + if (res) + return res; + iad_desc.iFunction = strings_fn[STR_ASSOC].id; + std_ac_if_desc.iInterface = strings_fn[STR_IF_CTRL].id; + in_clk_src_desc.iClockSource = strings_fn[STR_CLKSRC_IN].id; + out_clk_src_desc.iClockSource = strings_fn[STR_CLKSRC_OUT].id; + usb_out_it_desc.iTerminal = strings_fn[STR_USB_IT].id; + io_in_it_desc.iTerminal = strings_fn[STR_IO_IT].id; + usb_in_ot_desc.iTerminal = strings_fn[STR_USB_OT].id; + io_out_ot_desc.iTerminal = strings_fn[STR_IO_OT].id; + std_as_out_if0_desc.iInterface = strings_fn[STR_AS_OUT_ALT0].id; + std_as_out_if1_desc.iInterface = strings_fn[STR_AS_OUT_ALT1].id; + std_as_in_if0_desc.iInterface = strings_fn[STR_AS_IN_ALT0].id; + std_as_in_if1_desc.iInterface = strings_fn[STR_AS_IN_ALT1].id; agdev_g->func.name = "uac2_func"; agdev_g->func.strings = fn_strings; diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c index 2a8bf0655c6..92efd6ec48a 100644 --- a/drivers/usb/gadget/f_uvc.c +++ b/drivers/usb/gadget/f_uvc.c @@ -16,6 +16,7 @@ #include <linux/fs.h> #include <linux/list.h> #include <linux/mutex.h> +#include <linux/string.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include <linux/usb/video.h> @@ -417,10 +418,9 @@ uvc_register_video(struct uvc_device *uvc) return -ENOMEM; video->parent = &cdev->gadget->dev; - video->minor = -1; video->fops = &uvc_v4l2_fops; video->release = video_device_release; - strncpy(video->name, cdev->gadget->name, sizeof(video->name)); + strlcpy(video->name, cdev->gadget->name, sizeof(video->name)); uvc->vdev = video; video_set_drvdata(video, uvc); @@ -577,27 +577,15 @@ uvc_function_unbind(struct usb_configuration *c, struct usb_function *f) INFO(cdev, "uvc_function_unbind\n"); - if (uvc->vdev) { - if (uvc->vdev->minor == -1) - video_device_release(uvc->vdev); - else - video_unregister_device(uvc->vdev); - uvc->vdev = NULL; - } + video_unregister_device(uvc->vdev); + uvc->control_ep->driver_data = NULL; + uvc->video.ep->driver_data = NULL; - if (uvc->control_ep) - uvc->control_ep->driver_data = NULL; - if (uvc->video.ep) - uvc->video.ep->driver_data = NULL; - - if (uvc->control_req) { - usb_ep_free_request(cdev->gadget->ep0, uvc->control_req); - kfree(uvc->control_buf); - } + uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id = 0; + usb_ep_free_request(cdev->gadget->ep0, uvc->control_req); + kfree(uvc->control_buf); - kfree(f->descriptors); - kfree(f->hs_descriptors); - kfree(f->ss_descriptors); + usb_free_all_descriptors(f); kfree(uvc); } @@ -663,49 +651,40 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f) /* sanity check the streaming endpoint module parameters */ if (streaming_maxpacket > 1024) streaming_maxpacket = 1024; + /* + * Fill in the HS descriptors from the module parameters for the Video + * Streaming endpoint. + * NOTE: We assume that the user knows what they are doing and won't + * give parameters that their UDC doesn't support. + */ + uvc_hs_streaming_ep.wMaxPacketSize = streaming_maxpacket; + uvc_hs_streaming_ep.wMaxPacketSize |= streaming_mult << 11; + uvc_hs_streaming_ep.bInterval = streaming_interval; + uvc_hs_streaming_ep.bEndpointAddress = + uvc_fs_streaming_ep.bEndpointAddress; - /* Copy descriptors for FS. */ - f->descriptors = uvc_copy_descriptors(uvc, USB_SPEED_FULL); - - /* support high speed hardware */ - if (gadget_is_dualspeed(cdev->gadget)) { - /* - * Fill in the HS descriptors from the module parameters for the - * Video Streaming endpoint. - * NOTE: We assume that the user knows what they are doing and - * won't give parameters that their UDC doesn't support. - */ - uvc_hs_streaming_ep.wMaxPacketSize = streaming_maxpacket; - uvc_hs_streaming_ep.wMaxPacketSize |= streaming_mult << 11; - uvc_hs_streaming_ep.bInterval = streaming_interval; - uvc_hs_streaming_ep.bEndpointAddress = - uvc_fs_streaming_ep.bEndpointAddress; - - /* Copy descriptors. */ - f->hs_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_HIGH); - } + /* + * Fill in the SS descriptors from the module parameters for the Video + * Streaming endpoint. + * NOTE: We assume that the user knows what they are doing and won't + * give parameters that their UDC doesn't support. + */ + uvc_ss_streaming_ep.wMaxPacketSize = streaming_maxpacket; + uvc_ss_streaming_ep.bInterval = streaming_interval; + uvc_ss_streaming_comp.bmAttributes = streaming_mult; + uvc_ss_streaming_comp.bMaxBurst = streaming_maxburst; + uvc_ss_streaming_comp.wBytesPerInterval = + streaming_maxpacket * (streaming_mult + 1) * + (streaming_maxburst + 1); + uvc_ss_streaming_ep.bEndpointAddress = + uvc_fs_streaming_ep.bEndpointAddress; - /* support super speed hardware */ - if (gadget_is_superspeed(c->cdev->gadget)) { - /* - * Fill in the SS descriptors from the module parameters for the - * Video Streaming endpoint. - * NOTE: We assume that the user knows what they are doing and - * won't give parameters that their UDC doesn't support. - */ - uvc_ss_streaming_ep.wMaxPacketSize = streaming_maxpacket; - uvc_ss_streaming_ep.bInterval = streaming_interval; - uvc_ss_streaming_comp.bmAttributes = streaming_mult; - uvc_ss_streaming_comp.bMaxBurst = streaming_maxburst; - uvc_ss_streaming_comp.wBytesPerInterval = - streaming_maxpacket * (streaming_mult + 1) * - (streaming_maxburst + 1); - uvc_ss_streaming_ep.bEndpointAddress = - uvc_fs_streaming_ep.bEndpointAddress; - - /* Copy descriptors. */ + /* Copy descriptors */ + f->fs_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_FULL); + if (gadget_is_dualspeed(cdev->gadget)) + f->hs_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_HIGH); + if (gadget_is_superspeed(c->cdev->gadget)) f->ss_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_SUPER); - } /* Preallocate control endpoint request. */ uvc->control_req = usb_ep_alloc_request(cdev->gadget->ep0, GFP_KERNEL); @@ -740,7 +719,20 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f) return 0; error: - uvc_function_unbind(c, f); + if (uvc->vdev) + video_device_release(uvc->vdev); + + if (uvc->control_ep) + uvc->control_ep->driver_data = NULL; + if (uvc->video.ep) + uvc->video.ep->driver_data = NULL; + + if (uvc->control_req) { + usb_ep_free_request(cdev->gadget->ep0, uvc->control_req); + kfree(uvc->control_buf); + } + + usb_free_all_descriptors(f); return ret; } @@ -808,25 +800,16 @@ uvc_bind_config(struct usb_configuration *c, uvc->desc.hs_streaming = hs_streaming; uvc->desc.ss_streaming = ss_streaming; - /* maybe allocate device-global string IDs, and patch descriptors */ + /* Allocate string descriptor numbers. */ if (uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id == 0) { - /* Allocate string descriptor numbers. */ - ret = usb_string_id(c->cdev); - if (ret < 0) - goto error; - uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id = ret; - uvc_iad.iFunction = ret; - - ret = usb_string_id(c->cdev); - if (ret < 0) - goto error; - uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id = ret; - uvc_control_intf.iInterface = ret; - - ret = usb_string_id(c->cdev); - if (ret < 0) + ret = usb_string_ids_tab(c->cdev, uvc_en_us_strings); + if (ret) goto error; - uvc_en_us_strings[UVC_STRING_STREAMING_IDX].id = ret; + uvc_iad.iFunction = + uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id; + uvc_control_intf.iInterface = + uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id; + ret = uvc_en_us_strings[UVC_STRING_STREAMING_IDX].id; uvc_streaming_intf_alt0.iInterface = ret; uvc_streaming_intf_alt1.iInterface = ret; } diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c deleted file mode 100644 index 3f7d640b675..00000000000 --- a/drivers/usb/gadget/file_storage.c +++ /dev/null @@ -1,3656 +0,0 @@ -/* - * file_storage.c -- File-backed USB Storage Gadget, for USB development - * - * Copyright (C) 2003-2008 Alan Stern - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation, either version 2 of that License or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - - -/* - * The File-backed Storage Gadget acts as a USB Mass Storage device, - * appearing to the host as a disk drive or as a CD-ROM drive. In addition - * to providing an example of a genuinely useful gadget driver for a USB - * device, it also illustrates a technique of double-buffering for increased - * throughput. Last but not least, it gives an easy way to probe the - * behavior of the Mass Storage drivers in a USB host. - * - * Backing storage is provided by a regular file or a block device, specified - * by the "file" module parameter. Access can be limited to read-only by - * setting the optional "ro" module parameter. (For CD-ROM emulation, - * access is always read-only.) The gadget will indicate that it has - * removable media if the optional "removable" module parameter is set. - * - * The gadget supports the Control-Bulk (CB), Control-Bulk-Interrupt (CBI), - * and Bulk-Only (also known as Bulk-Bulk-Bulk or BBB) transports, selected - * by the optional "transport" module parameter. It also supports the - * following protocols: RBC (0x01), ATAPI or SFF-8020i (0x02), QIC-157 (0c03), - * UFI (0x04), SFF-8070i (0x05), and transparent SCSI (0x06), selected by - * the optional "protocol" module parameter. In addition, the default - * Vendor ID, Product ID, release number and serial number can be overridden. - * - * There is support for multiple logical units (LUNs), each of which has - * its own backing file. The number of LUNs can be set using the optional - * "luns" module parameter (anywhere from 1 to 8), and the corresponding - * files are specified using comma-separated lists for "file" and "ro". - * The default number of LUNs is taken from the number of "file" elements; - * it is 1 if "file" is not given. If "removable" is not set then a backing - * file must be specified for each LUN. If it is set, then an unspecified - * or empty backing filename means the LUN's medium is not loaded. Ideally - * each LUN would be settable independently as a disk drive or a CD-ROM - * drive, but currently all LUNs have to be the same type. The CD-ROM - * emulation includes a single data track and no audio tracks; hence there - * need be only one backing file per LUN. - * - * Requirements are modest; only a bulk-in and a bulk-out endpoint are - * needed (an interrupt-out endpoint is also needed for CBI). The memory - * requirement amounts to two 16K buffers, size configurable by a parameter. - * Support is included for both full-speed and high-speed operation. - * - * Note that the driver is slightly non-portable in that it assumes a - * single memory/DMA buffer will be useable for bulk-in, bulk-out, and - * interrupt-in endpoints. With most device controllers this isn't an - * issue, but there may be some with hardware restrictions that prevent - * a buffer from being used by more than one endpoint. - * - * Module options: - * - * file=filename[,filename...] - * Required if "removable" is not set, names of - * the files or block devices used for - * backing storage - * serial=HHHH... Required serial number (string of hex chars) - * ro=b[,b...] Default false, booleans for read-only access - * removable Default false, boolean for removable media - * luns=N Default N = number of filenames, number of - * LUNs to support - * nofua=b[,b...] Default false, booleans for ignore FUA flag - * in SCSI WRITE(10,12) commands - * stall Default determined according to the type of - * USB device controller (usually true), - * boolean to permit the driver to halt - * bulk endpoints - * cdrom Default false, boolean for whether to emulate - * a CD-ROM drive - * transport=XXX Default BBB, transport name (CB, CBI, or BBB) - * protocol=YYY Default SCSI, protocol name (RBC, 8020 or - * ATAPI, QIC, UFI, 8070, or SCSI; - * also 1 - 6) - * vendor=0xVVVV Default 0x0525 (NetChip), USB Vendor ID - * product=0xPPPP Default 0xa4a5 (FSG), USB Product ID - * release=0xRRRR Override the USB release number (bcdDevice) - * buflen=N Default N=16384, buffer size used (will be - * rounded down to a multiple of - * PAGE_CACHE_SIZE) - * - * If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "serial", "ro", - * "removable", "luns", "nofua", "stall", and "cdrom" options are available; - * default values are used for everything else. - * - * The pathnames of the backing files and the ro settings are available in - * the attribute files "file", "nofua", and "ro" in the lun<n> subdirectory of - * the gadget's sysfs directory. If the "removable" option is set, writing to - * these files will simulate ejecting/loading the medium (writing an empty - * line means eject) and adjusting a write-enable tab. Changes to the ro - * setting are not allowed when the medium is loaded or if CD-ROM emulation - * is being used. - * - * This gadget driver is heavily based on "Gadget Zero" by David Brownell. - * The driver's SCSI command interface was based on the "Information - * technology - Small Computer System Interface - 2" document from - * X3T9.2 Project 375D, Revision 10L, 7-SEP-93, available at - * <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>. The single exception - * is opcode 0x23 (READ FORMAT CAPACITIES), which was based on the - * "Universal Serial Bus Mass Storage Class UFI Command Specification" - * document, Revision 1.0, December 14, 1998, available at - * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>. - */ - - -/* - * Driver Design - * - * The FSG driver is fairly straightforward. There is a main kernel - * thread that handles most of the work. Interrupt routines field - * callbacks from the controller driver: bulk- and interrupt-request - * completion notifications, endpoint-0 events, and disconnect events. - * Completion events are passed to the main thread by wakeup calls. Many - * ep0 requests are handled at interrupt time, but SetInterface, - * SetConfiguration, and device reset requests are forwarded to the - * thread in the form of "exceptions" using SIGUSR1 signals (since they - * should interrupt any ongoing file I/O operations). - * - * The thread's main routine implements the standard command/data/status - * parts of a SCSI interaction. It and its subroutines are full of tests - * for pending signals/exceptions -- all this polling is necessary since - * the kernel has no setjmp/longjmp equivalents. (Maybe this is an - * indication that the driver really wants to be running in userspace.) - * An important point is that so long as the thread is alive it keeps an - * open reference to the backing file. This will prevent unmounting - * the backing file's underlying filesystem and could cause problems - * during system shutdown, for example. To prevent such problems, the - * thread catches INT, TERM, and KILL signals and converts them into - * an EXIT exception. - * - * In normal operation the main thread is started during the gadget's - * fsg_bind() callback and stopped during fsg_unbind(). But it can also - * exit when it receives a signal, and there's no point leaving the - * gadget running when the thread is dead. So just before the thread - * exits, it deregisters the gadget driver. This makes things a little - * tricky: The driver is deregistered at two places, and the exiting - * thread can indirectly call fsg_unbind() which in turn can tell the - * thread to exit. The first problem is resolved through the use of the - * REGISTERED atomic bitflag; the driver will only be deregistered once. - * The second problem is resolved by having fsg_unbind() check - * fsg->state; it won't try to stop the thread if the state is already - * FSG_STATE_TERMINATED. - * - * To provide maximum throughput, the driver uses a circular pipeline of - * buffer heads (struct fsg_buffhd). In principle the pipeline can be - * arbitrarily long; in practice the benefits don't justify having more - * than 2 stages (i.e., double buffering). But it helps to think of the - * pipeline as being a long one. Each buffer head contains a bulk-in and - * a bulk-out request pointer (since the buffer can be used for both - * output and input -- directions always are given from the host's - * point of view) as well as a pointer to the buffer and various state - * variables. - * - * Use of the pipeline follows a simple protocol. There is a variable - * (fsg->next_buffhd_to_fill) that points to the next buffer head to use. - * At any time that buffer head may still be in use from an earlier - * request, so each buffer head has a state variable indicating whether - * it is EMPTY, FULL, or BUSY. Typical use involves waiting for the - * buffer head to be EMPTY, filling the buffer either by file I/O or by - * USB I/O (during which the buffer head is BUSY), and marking the buffer - * head FULL when the I/O is complete. Then the buffer will be emptied - * (again possibly by USB I/O, during which it is marked BUSY) and - * finally marked EMPTY again (possibly by a completion routine). - * - * A module parameter tells the driver to avoid stalling the bulk - * endpoints wherever the transport specification allows. This is - * necessary for some UDCs like the SuperH, which cannot reliably clear a - * halt on a bulk endpoint. However, under certain circumstances the - * Bulk-only specification requires a stall. In such cases the driver - * will halt the endpoint and set a flag indicating that it should clear - * the halt in software during the next device reset. Hopefully this - * will permit everything to work correctly. Furthermore, although the - * specification allows the bulk-out endpoint to halt when the host sends - * too much data, implementing this would cause an unavoidable race. - * The driver will always use the "no-stall" approach for OUT transfers. - * - * One subtle point concerns sending status-stage responses for ep0 - * requests. Some of these requests, such as device reset, can involve - * interrupting an ongoing file I/O operation, which might take an - * arbitrarily long time. During that delay the host might give up on - * the original ep0 request and issue a new one. When that happens the - * driver should not notify the host about completion of the original - * request, as the host will no longer be waiting for it. So the driver - * assigns to each ep0 request a unique tag, and it keeps track of the - * tag value of the request associated with a long-running exception - * (device-reset, interface-change, or configuration-change). When the - * exception handler is finished, the status-stage response is submitted - * only if the current ep0 request tag is equal to the exception request - * tag. Thus only the most recently received ep0 request will get a - * status-stage response. - * - * Warning: This driver source file is too long. It ought to be split up - * into a header file plus about 3 separate .c files, to handle the details - * of the Gadget, USB Mass Storage, and SCSI protocols. - */ - - -/* #define VERBOSE_DEBUG */ -/* #define DUMP_MSGS */ - - -#include <linux/blkdev.h> -#include <linux/completion.h> -#include <linux/dcache.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/fcntl.h> -#include <linux/file.h> -#include <linux/fs.h> -#include <linux/kref.h> -#include <linux/kthread.h> -#include <linux/limits.h> -#include <linux/module.h> -#include <linux/rwsem.h> -#include <linux/slab.h> -#include <linux/spinlock.h> -#include <linux/string.h> -#include <linux/freezer.h> -#include <linux/utsname.h> - -#include <linux/usb/composite.h> -#include <linux/usb/ch9.h> -#include <linux/usb/gadget.h> - -#include "gadget_chips.h" - -#define DRIVER_DESC "File-backed Storage Gadget" -#define DRIVER_NAME "g_file_storage" -#define DRIVER_VERSION "1 September 2010" - -static char fsg_string_manufacturer[64]; -static const char fsg_string_product[] = DRIVER_DESC; -static const char fsg_string_config[] = "Self-powered"; -static const char fsg_string_interface[] = "Mass Storage"; - - -#include "storage_common.c" - - -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_AUTHOR("Alan Stern"); -MODULE_LICENSE("Dual BSD/GPL"); - -/* - * This driver assumes self-powered hardware and has no way for users to - * trigger remote wakeup. It uses autoconfiguration to select endpoints - * and endpoint addresses. - */ - - -/*-------------------------------------------------------------------------*/ - - -/* Encapsulate the module parameter settings */ - -static struct { - char *file[FSG_MAX_LUNS]; - char *serial; - bool ro[FSG_MAX_LUNS]; - bool nofua[FSG_MAX_LUNS]; - unsigned int num_filenames; - unsigned int num_ros; - unsigned int num_nofuas; - unsigned int nluns; - - bool removable; - bool can_stall; - bool cdrom; - - char *transport_parm; - char *protocol_parm; - unsigned short vendor; - unsigned short product; - unsigned short release; - unsigned int buflen; - - int transport_type; - char *transport_name; - int protocol_type; - char *protocol_name; - -} mod_data = { // Default values - .transport_parm = "BBB", - .protocol_parm = "SCSI", - .removable = 0, - .can_stall = 1, - .cdrom = 0, - .vendor = FSG_VENDOR_ID, - .product = FSG_PRODUCT_ID, - .release = 0xffff, // Use controller chip type - .buflen = 16384, - }; - - -module_param_array_named(file, mod_data.file, charp, &mod_data.num_filenames, - S_IRUGO); -MODULE_PARM_DESC(file, "names of backing files or devices"); - -module_param_named(serial, mod_data.serial, charp, S_IRUGO); -MODULE_PARM_DESC(serial, "USB serial number"); - -module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO); -MODULE_PARM_DESC(ro, "true to force read-only"); - -module_param_array_named(nofua, mod_data.nofua, bool, &mod_data.num_nofuas, - S_IRUGO); -MODULE_PARM_DESC(nofua, "true to ignore SCSI WRITE(10,12) FUA bit"); - -module_param_named(luns, mod_data.nluns, uint, S_IRUGO); -MODULE_PARM_DESC(luns, "number of LUNs"); - -module_param_named(removable, mod_data.removable, bool, S_IRUGO); -MODULE_PARM_DESC(removable, "true to simulate removable media"); - -module_param_named(stall, mod_data.can_stall, bool, S_IRUGO); -MODULE_PARM_DESC(stall, "false to prevent bulk stalls"); - -module_param_named(cdrom, mod_data.cdrom, bool, S_IRUGO); -MODULE_PARM_DESC(cdrom, "true to emulate cdrom instead of disk"); - -/* In the non-TEST version, only the module parameters listed above - * are available. */ -#ifdef CONFIG_USB_FILE_STORAGE_TEST - -module_param_named(transport, mod_data.transport_parm, charp, S_IRUGO); -MODULE_PARM_DESC(transport, "type of transport (BBB, CBI, or CB)"); - -module_param_named(protocol, mod_data.protocol_parm, charp, S_IRUGO); -MODULE_PARM_DESC(protocol, "type of protocol (RBC, 8020, QIC, UFI, " - "8070, or SCSI)"); - -module_param_named(vendor, mod_data.vendor, ushort, S_IRUGO); -MODULE_PARM_DESC(vendor, "USB Vendor ID"); - -module_param_named(product, mod_data.product, ushort, S_IRUGO); -MODULE_PARM_DESC(product, "USB Product ID"); - -module_param_named(release, mod_data.release, ushort, S_IRUGO); -MODULE_PARM_DESC(release, "USB release number"); - -module_param_named(buflen, mod_data.buflen, uint, S_IRUGO); -MODULE_PARM_DESC(buflen, "I/O buffer size"); - -#endif /* CONFIG_USB_FILE_STORAGE_TEST */ - - -/* - * These definitions will permit the compiler to avoid generating code for - * parts of the driver that aren't used in the non-TEST version. Even gcc - * can recognize when a test of a constant expression yields a dead code - * path. - */ - -#ifdef CONFIG_USB_FILE_STORAGE_TEST - -#define transport_is_bbb() (mod_data.transport_type == USB_PR_BULK) -#define transport_is_cbi() (mod_data.transport_type == USB_PR_CBI) -#define protocol_is_scsi() (mod_data.protocol_type == USB_SC_SCSI) - -#else - -#define transport_is_bbb() 1 -#define transport_is_cbi() 0 -#define protocol_is_scsi() 1 - -#endif /* CONFIG_USB_FILE_STORAGE_TEST */ - - -/*-------------------------------------------------------------------------*/ - - -struct fsg_dev { - /* lock protects: state, all the req_busy's, and cbbuf_cmnd */ - spinlock_t lock; - struct usb_gadget *gadget; - - /* filesem protects: backing files in use */ - struct rw_semaphore filesem; - - /* reference counting: wait until all LUNs are released */ - struct kref ref; - - struct usb_ep *ep0; // Handy copy of gadget->ep0 - struct usb_request *ep0req; // For control responses - unsigned int ep0_req_tag; - const char *ep0req_name; - - struct usb_request *intreq; // For interrupt responses - int intreq_busy; - struct fsg_buffhd *intr_buffhd; - - unsigned int bulk_out_maxpacket; - enum fsg_state state; // For exception handling - unsigned int exception_req_tag; - - u8 config, new_config; - - unsigned int running : 1; - unsigned int bulk_in_enabled : 1; - unsigned int bulk_out_enabled : 1; - unsigned int intr_in_enabled : 1; - unsigned int phase_error : 1; - unsigned int short_packet_received : 1; - unsigned int bad_lun_okay : 1; - - unsigned long atomic_bitflags; -#define REGISTERED 0 -#define IGNORE_BULK_OUT 1 -#define SUSPENDED 2 - - struct usb_ep *bulk_in; - struct usb_ep *bulk_out; - struct usb_ep *intr_in; - - struct fsg_buffhd *next_buffhd_to_fill; - struct fsg_buffhd *next_buffhd_to_drain; - - int thread_wakeup_needed; - struct completion thread_notifier; - struct task_struct *thread_task; - - int cmnd_size; - u8 cmnd[MAX_COMMAND_SIZE]; - enum data_direction data_dir; - u32 data_size; - u32 data_size_from_cmnd; - u32 tag; - unsigned int lun; - u32 residue; - u32 usb_amount_left; - - /* The CB protocol offers no way for a host to know when a command - * has completed. As a result the next command may arrive early, - * and we will still have to handle it. For that reason we need - * a buffer to store new commands when using CB (or CBI, which - * does not oblige a host to wait for command completion either). */ - int cbbuf_cmnd_size; - u8 cbbuf_cmnd[MAX_COMMAND_SIZE]; - - unsigned int nluns; - struct fsg_lun *luns; - struct fsg_lun *curlun; - /* Must be the last entry */ - struct fsg_buffhd buffhds[]; -}; - -typedef void (*fsg_routine_t)(struct fsg_dev *); - -static int exception_in_progress(struct fsg_dev *fsg) -{ - return (fsg->state > FSG_STATE_IDLE); -} - -/* Make bulk-out requests be divisible by the maxpacket size */ -static void set_bulk_out_req_length(struct fsg_dev *fsg, - struct fsg_buffhd *bh, unsigned int length) -{ - unsigned int rem; - - bh->bulk_out_intended_length = length; - rem = length % fsg->bulk_out_maxpacket; - if (rem > 0) - length += fsg->bulk_out_maxpacket - rem; - bh->outreq->length = length; -} - -static struct fsg_dev *the_fsg; -static struct usb_gadget_driver fsg_driver; - - -/*-------------------------------------------------------------------------*/ - -static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) -{ - const char *name; - - if (ep == fsg->bulk_in) - name = "bulk-in"; - else if (ep == fsg->bulk_out) - name = "bulk-out"; - else - name = ep->name; - DBG(fsg, "%s set halt\n", name); - return usb_ep_set_halt(ep); -} - - -/*-------------------------------------------------------------------------*/ - -/* - * DESCRIPTORS ... most are static, but strings and (full) configuration - * descriptors are built on demand. Also the (static) config and interface - * descriptors are adjusted during fsg_bind(). - */ - -/* There is only one configuration. */ -#define CONFIG_VALUE 1 - -static struct usb_device_descriptor -device_desc = { - .bLength = sizeof device_desc, - .bDescriptorType = USB_DT_DEVICE, - - .bcdUSB = cpu_to_le16(0x0200), - .bDeviceClass = USB_CLASS_PER_INTERFACE, - - /* The next three values can be overridden by module parameters */ - .idVendor = cpu_to_le16(FSG_VENDOR_ID), - .idProduct = cpu_to_le16(FSG_PRODUCT_ID), - .bcdDevice = cpu_to_le16(0xffff), - - .iManufacturer = FSG_STRING_MANUFACTURER, - .iProduct = FSG_STRING_PRODUCT, - .iSerialNumber = FSG_STRING_SERIAL, - .bNumConfigurations = 1, -}; - -static struct usb_config_descriptor -config_desc = { - .bLength = sizeof config_desc, - .bDescriptorType = USB_DT_CONFIG, - - /* wTotalLength computed by usb_gadget_config_buf() */ - .bNumInterfaces = 1, - .bConfigurationValue = CONFIG_VALUE, - .iConfiguration = FSG_STRING_CONFIG, - .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, - .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2, -}; - - -static struct usb_qualifier_descriptor -dev_qualifier = { - .bLength = sizeof dev_qualifier, - .bDescriptorType = USB_DT_DEVICE_QUALIFIER, - - .bcdUSB = cpu_to_le16(0x0200), - .bDeviceClass = USB_CLASS_PER_INTERFACE, - - .bNumConfigurations = 1, -}; - -static int populate_bos(struct fsg_dev *fsg, u8 *buf) -{ - memcpy(buf, &fsg_bos_desc, USB_DT_BOS_SIZE); - buf += USB_DT_BOS_SIZE; - - memcpy(buf, &fsg_ext_cap_desc, USB_DT_USB_EXT_CAP_SIZE); - buf += USB_DT_USB_EXT_CAP_SIZE; - - memcpy(buf, &fsg_ss_cap_desc, USB_DT_USB_SS_CAP_SIZE); - - return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE - + USB_DT_USB_EXT_CAP_SIZE; -} - -/* - * Config descriptors must agree with the code that sets configurations - * and with code managing interfaces and their altsettings. They must - * also handle different speeds and other-speed requests. - */ -static int populate_config_buf(struct usb_gadget *gadget, - u8 *buf, u8 type, unsigned index) -{ - enum usb_device_speed speed = gadget->speed; - int len; - const struct usb_descriptor_header **function; - - if (index > 0) - return -EINVAL; - - if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG) - speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed; - function = gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH - ? (const struct usb_descriptor_header **)fsg_hs_function - : (const struct usb_descriptor_header **)fsg_fs_function; - - /* for now, don't advertise srp-only devices */ - if (!gadget_is_otg(gadget)) - function++; - - len = usb_gadget_config_buf(&config_desc, buf, EP0_BUFSIZE, function); - ((struct usb_config_descriptor *) buf)->bDescriptorType = type; - return len; -} - - -/*-------------------------------------------------------------------------*/ - -/* These routines may be called in process context or in_irq */ - -/* Caller must hold fsg->lock */ -static void wakeup_thread(struct fsg_dev *fsg) -{ - /* Tell the main thread that something has happened */ - fsg->thread_wakeup_needed = 1; - if (fsg->thread_task) - wake_up_process(fsg->thread_task); -} - - -static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state) -{ - unsigned long flags; - - /* Do nothing if a higher-priority exception is already in progress. - * If a lower-or-equal priority exception is in progress, preempt it - * and notify the main thread by sending it a signal. */ - spin_lock_irqsave(&fsg->lock, flags); - if (fsg->state <= new_state) { - fsg->exception_req_tag = fsg->ep0_req_tag; - fsg->state = new_state; - if (fsg->thread_task) - send_sig_info(SIGUSR1, SEND_SIG_FORCED, - fsg->thread_task); - } - spin_unlock_irqrestore(&fsg->lock, flags); -} - - -/*-------------------------------------------------------------------------*/ - -/* The disconnect callback and ep0 routines. These always run in_irq, - * except that ep0_queue() is called in the main thread to acknowledge - * completion of various requests: set config, set interface, and - * Bulk-only device reset. */ - -static void fsg_disconnect(struct usb_gadget *gadget) -{ - struct fsg_dev *fsg = get_gadget_data(gadget); - - DBG(fsg, "disconnect or port reset\n"); - raise_exception(fsg, FSG_STATE_DISCONNECT); -} - - -static int ep0_queue(struct fsg_dev *fsg) -{ - int rc; - - rc = usb_ep_queue(fsg->ep0, fsg->ep0req, GFP_ATOMIC); - if (rc != 0 && rc != -ESHUTDOWN) { - - /* We can't do much more than wait for a reset */ - WARNING(fsg, "error in submission: %s --> %d\n", - fsg->ep0->name, rc); - } - return rc; -} - -static void ep0_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct fsg_dev *fsg = ep->driver_data; - - if (req->actual > 0) - dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual); - if (req->status || req->actual != req->length) - DBG(fsg, "%s --> %d, %u/%u\n", __func__, - req->status, req->actual, req->length); - if (req->status == -ECONNRESET) // Request was cancelled - usb_ep_fifo_flush(ep); - - if (req->status == 0 && req->context) - ((fsg_routine_t) (req->context))(fsg); -} - - -/*-------------------------------------------------------------------------*/ - -/* Bulk and interrupt endpoint completion handlers. - * These always run in_irq. */ - -static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct fsg_dev *fsg = ep->driver_data; - struct fsg_buffhd *bh = req->context; - - if (req->status || req->actual != req->length) - DBG(fsg, "%s --> %d, %u/%u\n", __func__, - req->status, req->actual, req->length); - if (req->status == -ECONNRESET) // Request was cancelled - usb_ep_fifo_flush(ep); - - /* Hold the lock while we update the request and buffer states */ - smp_wmb(); - spin_lock(&fsg->lock); - bh->inreq_busy = 0; - bh->state = BUF_STATE_EMPTY; - wakeup_thread(fsg); - spin_unlock(&fsg->lock); -} - -static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct fsg_dev *fsg = ep->driver_data; - struct fsg_buffhd *bh = req->context; - - dump_msg(fsg, "bulk-out", req->buf, req->actual); - if (req->status || req->actual != bh->bulk_out_intended_length) - DBG(fsg, "%s --> %d, %u/%u\n", __func__, - req->status, req->actual, - bh->bulk_out_intended_length); - if (req->status == -ECONNRESET) // Request was cancelled - usb_ep_fifo_flush(ep); - - /* Hold the lock while we update the request and buffer states */ - smp_wmb(); - spin_lock(&fsg->lock); - bh->outreq_busy = 0; - bh->state = BUF_STATE_FULL; - wakeup_thread(fsg); - spin_unlock(&fsg->lock); -} - - -#ifdef CONFIG_USB_FILE_STORAGE_TEST -static void intr_in_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct fsg_dev *fsg = ep->driver_data; - struct fsg_buffhd *bh = req->context; - - if (req->status || req->actual != req->length) - DBG(fsg, "%s --> %d, %u/%u\n", __func__, - req->status, req->actual, req->length); - if (req->status == -ECONNRESET) // Request was cancelled - usb_ep_fifo_flush(ep); - - /* Hold the lock while we update the request and buffer states */ - smp_wmb(); - spin_lock(&fsg->lock); - fsg->intreq_busy = 0; - bh->state = BUF_STATE_EMPTY; - wakeup_thread(fsg); - spin_unlock(&fsg->lock); -} - -#else -static void intr_in_complete(struct usb_ep *ep, struct usb_request *req) -{} -#endif /* CONFIG_USB_FILE_STORAGE_TEST */ - - -/*-------------------------------------------------------------------------*/ - -/* Ep0 class-specific handlers. These always run in_irq. */ - -#ifdef CONFIG_USB_FILE_STORAGE_TEST -static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh) -{ - struct usb_request *req = fsg->ep0req; - static u8 cbi_reset_cmnd[6] = { - SEND_DIAGNOSTIC, 4, 0xff, 0xff, 0xff, 0xff}; - - /* Error in command transfer? */ - if (req->status || req->length != req->actual || - req->actual < 6 || req->actual > MAX_COMMAND_SIZE) { - - /* Not all controllers allow a protocol stall after - * receiving control-out data, but we'll try anyway. */ - fsg_set_halt(fsg, fsg->ep0); - return; // Wait for reset - } - - /* Is it the special reset command? */ - if (req->actual >= sizeof cbi_reset_cmnd && - memcmp(req->buf, cbi_reset_cmnd, - sizeof cbi_reset_cmnd) == 0) { - - /* Raise an exception to stop the current operation - * and reinitialize our state. */ - DBG(fsg, "cbi reset request\n"); - raise_exception(fsg, FSG_STATE_RESET); - return; - } - - VDBG(fsg, "CB[I] accept device-specific command\n"); - spin_lock(&fsg->lock); - - /* Save the command for later */ - if (fsg->cbbuf_cmnd_size) - WARNING(fsg, "CB[I] overwriting previous command\n"); - fsg->cbbuf_cmnd_size = req->actual; - memcpy(fsg->cbbuf_cmnd, req->buf, fsg->cbbuf_cmnd_size); - - wakeup_thread(fsg); - spin_unlock(&fsg->lock); -} - -#else -static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh) -{} -#endif /* CONFIG_USB_FILE_STORAGE_TEST */ - - -static int class_setup_req(struct fsg_dev *fsg, - const struct usb_ctrlrequest *ctrl) -{ - struct usb_request *req = fsg->ep0req; - int value = -EOPNOTSUPP; - u16 w_index = le16_to_cpu(ctrl->wIndex); - u16 w_value = le16_to_cpu(ctrl->wValue); - u16 w_length = le16_to_cpu(ctrl->wLength); - - if (!fsg->config) - return value; - - /* Handle Bulk-only class-specific requests */ - if (transport_is_bbb()) { - switch (ctrl->bRequest) { - - case US_BULK_RESET_REQUEST: - if (ctrl->bRequestType != (USB_DIR_OUT | - USB_TYPE_CLASS | USB_RECIP_INTERFACE)) - break; - if (w_index != 0 || w_value != 0 || w_length != 0) { - value = -EDOM; - break; - } - - /* Raise an exception to stop the current operation - * and reinitialize our state. */ - DBG(fsg, "bulk reset request\n"); - raise_exception(fsg, FSG_STATE_RESET); - value = DELAYED_STATUS; - break; - - case US_BULK_GET_MAX_LUN: - if (ctrl->bRequestType != (USB_DIR_IN | - USB_TYPE_CLASS | USB_RECIP_INTERFACE)) - break; - if (w_index != 0 || w_value != 0 || w_length != 1) { - value = -EDOM; - break; - } - VDBG(fsg, "get max LUN\n"); - *(u8 *) req->buf = fsg->nluns - 1; - value = 1; - break; - } - } - - /* Handle CBI class-specific requests */ - else { - switch (ctrl->bRequest) { - - case USB_CBI_ADSC_REQUEST: - if (ctrl->bRequestType != (USB_DIR_OUT | - USB_TYPE_CLASS | USB_RECIP_INTERFACE)) - break; - if (w_index != 0 || w_value != 0) { - value = -EDOM; - break; - } - if (w_length > MAX_COMMAND_SIZE) { - value = -EOVERFLOW; - break; - } - value = w_length; - fsg->ep0req->context = received_cbi_adsc; - break; - } - } - - if (value == -EOPNOTSUPP) - VDBG(fsg, - "unknown class-specific control req " - "%02x.%02x v%04x i%04x l%u\n", - ctrl->bRequestType, ctrl->bRequest, - le16_to_cpu(ctrl->wValue), w_index, w_length); - return value; -} - - -/*-------------------------------------------------------------------------*/ - -/* Ep0 standard request handlers. These always run in_irq. */ - -static int standard_setup_req(struct fsg_dev *fsg, - const struct usb_ctrlrequest *ctrl) -{ - struct usb_request *req = fsg->ep0req; - int value = -EOPNOTSUPP; - u16 w_index = le16_to_cpu(ctrl->wIndex); - u16 w_value = le16_to_cpu(ctrl->wValue); - - /* Usually this just stores reply data in the pre-allocated ep0 buffer, - * but config change events will also reconfigure hardware. */ - switch (ctrl->bRequest) { - - case USB_REQ_GET_DESCRIPTOR: - if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | - USB_RECIP_DEVICE)) - break; - switch (w_value >> 8) { - - case USB_DT_DEVICE: - VDBG(fsg, "get device descriptor\n"); - device_desc.bMaxPacketSize0 = fsg->ep0->maxpacket; - value = sizeof device_desc; - memcpy(req->buf, &device_desc, value); - break; - case USB_DT_DEVICE_QUALIFIER: - VDBG(fsg, "get device qualifier\n"); - if (!gadget_is_dualspeed(fsg->gadget) || - fsg->gadget->speed == USB_SPEED_SUPER) - break; - /* - * Assume ep0 uses the same maxpacket value for both - * speeds - */ - dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket; - value = sizeof dev_qualifier; - memcpy(req->buf, &dev_qualifier, value); - break; - - case USB_DT_OTHER_SPEED_CONFIG: - VDBG(fsg, "get other-speed config descriptor\n"); - if (!gadget_is_dualspeed(fsg->gadget) || - fsg->gadget->speed == USB_SPEED_SUPER) - break; - goto get_config; - case USB_DT_CONFIG: - VDBG(fsg, "get configuration descriptor\n"); -get_config: - value = populate_config_buf(fsg->gadget, - req->buf, - w_value >> 8, - w_value & 0xff); - break; - - case USB_DT_STRING: - VDBG(fsg, "get string descriptor\n"); - - /* wIndex == language code */ - value = usb_gadget_get_string(&fsg_stringtab, - w_value & 0xff, req->buf); - break; - - case USB_DT_BOS: - VDBG(fsg, "get bos descriptor\n"); - - if (gadget_is_superspeed(fsg->gadget)) - value = populate_bos(fsg, req->buf); - break; - } - - break; - - /* One config, two speeds */ - case USB_REQ_SET_CONFIGURATION: - if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD | - USB_RECIP_DEVICE)) - break; - VDBG(fsg, "set configuration\n"); - if (w_value == CONFIG_VALUE || w_value == 0) { - fsg->new_config = w_value; - - /* Raise an exception to wipe out previous transaction - * state (queued bufs, etc) and set the new config. */ - raise_exception(fsg, FSG_STATE_CONFIG_CHANGE); - value = DELAYED_STATUS; - } - break; - case USB_REQ_GET_CONFIGURATION: - if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | - USB_RECIP_DEVICE)) - break; - VDBG(fsg, "get configuration\n"); - *(u8 *) req->buf = fsg->config; - value = 1; - break; - - case USB_REQ_SET_INTERFACE: - if (ctrl->bRequestType != (USB_DIR_OUT| USB_TYPE_STANDARD | - USB_RECIP_INTERFACE)) - break; - if (fsg->config && w_index == 0) { - - /* Raise an exception to wipe out previous transaction - * state (queued bufs, etc) and install the new - * interface altsetting. */ - raise_exception(fsg, FSG_STATE_INTERFACE_CHANGE); - value = DELAYED_STATUS; - } - break; - case USB_REQ_GET_INTERFACE: - if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | - USB_RECIP_INTERFACE)) - break; - if (!fsg->config) - break; - if (w_index != 0) { - value = -EDOM; - break; - } - VDBG(fsg, "get interface\n"); - *(u8 *) req->buf = 0; - value = 1; - break; - - default: - VDBG(fsg, - "unknown control req %02x.%02x v%04x i%04x l%u\n", - ctrl->bRequestType, ctrl->bRequest, - w_value, w_index, le16_to_cpu(ctrl->wLength)); - } - - return value; -} - - -static int fsg_setup(struct usb_gadget *gadget, - const struct usb_ctrlrequest *ctrl) -{ - struct fsg_dev *fsg = get_gadget_data(gadget); - int rc; - int w_length = le16_to_cpu(ctrl->wLength); - - ++fsg->ep0_req_tag; // Record arrival of a new request - fsg->ep0req->context = NULL; - fsg->ep0req->length = 0; - dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl)); - - if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS) - rc = class_setup_req(fsg, ctrl); - else - rc = standard_setup_req(fsg, ctrl); - - /* Respond with data/status or defer until later? */ - if (rc >= 0 && rc != DELAYED_STATUS) { - rc = min(rc, w_length); - fsg->ep0req->length = rc; - fsg->ep0req->zero = rc < w_length; - fsg->ep0req_name = (ctrl->bRequestType & USB_DIR_IN ? - "ep0-in" : "ep0-out"); - rc = ep0_queue(fsg); - } - - /* Device either stalls (rc < 0) or reports success */ - return rc; -} - - -/*-------------------------------------------------------------------------*/ - -/* All the following routines run in process context */ - - -/* Use this for bulk or interrupt transfers, not ep0 */ -static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep, - struct usb_request *req, int *pbusy, - enum fsg_buffer_state *state) -{ - int rc; - - if (ep == fsg->bulk_in) - dump_msg(fsg, "bulk-in", req->buf, req->length); - else if (ep == fsg->intr_in) - dump_msg(fsg, "intr-in", req->buf, req->length); - - spin_lock_irq(&fsg->lock); - *pbusy = 1; - *state = BUF_STATE_BUSY; - spin_unlock_irq(&fsg->lock); - rc = usb_ep_queue(ep, req, GFP_KERNEL); - if (rc != 0) { - *pbusy = 0; - *state = BUF_STATE_EMPTY; - - /* We can't do much more than wait for a reset */ - - /* Note: currently the net2280 driver fails zero-length - * submissions if DMA is enabled. */ - if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP && - req->length == 0)) - WARNING(fsg, "error in submission: %s --> %d\n", - ep->name, rc); - } -} - - -static int sleep_thread(struct fsg_dev *fsg) -{ - int rc = 0; - - /* Wait until a signal arrives or we are woken up */ - for (;;) { - try_to_freeze(); - set_current_state(TASK_INTERRUPTIBLE); - if (signal_pending(current)) { - rc = -EINTR; - break; - } - if (fsg->thread_wakeup_needed) - break; - schedule(); - } - __set_current_state(TASK_RUNNING); - fsg->thread_wakeup_needed = 0; - return rc; -} - - -/*-------------------------------------------------------------------------*/ - -static int do_read(struct fsg_dev *fsg) -{ - struct fsg_lun *curlun = fsg->curlun; - u32 lba; - struct fsg_buffhd *bh; - int rc; - u32 amount_left; - loff_t file_offset, file_offset_tmp; - unsigned int amount; - ssize_t nread; - - /* Get the starting Logical Block Address and check that it's - * not too big */ - if (fsg->cmnd[0] == READ_6) - lba = get_unaligned_be24(&fsg->cmnd[1]); - else { - lba = get_unaligned_be32(&fsg->cmnd[2]); - - /* We allow DPO (Disable Page Out = don't save data in the - * cache) and FUA (Force Unit Access = don't read from the - * cache), but we don't implement them. */ - if ((fsg->cmnd[1] & ~0x18) != 0) { - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - } - if (lba >= curlun->num_sectors) { - curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - return -EINVAL; - } - file_offset = ((loff_t) lba) << curlun->blkbits; - - /* Carry out the file reads */ - amount_left = fsg->data_size_from_cmnd; - if (unlikely(amount_left == 0)) - return -EIO; // No default reply - - for (;;) { - - /* Figure out how much we need to read: - * Try to read the remaining amount. - * But don't read more than the buffer size. - * And don't try to read past the end of the file. - */ - amount = min((unsigned int) amount_left, mod_data.buflen); - amount = min((loff_t) amount, - curlun->file_length - file_offset); - - /* Wait for the next buffer to become available */ - bh = fsg->next_buffhd_to_fill; - while (bh->state != BUF_STATE_EMPTY) { - rc = sleep_thread(fsg); - if (rc) - return rc; - } - - /* If we were asked to read past the end of file, - * end with an empty buffer. */ - if (amount == 0) { - curlun->sense_data = - SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = file_offset >> curlun->blkbits; - curlun->info_valid = 1; - bh->inreq->length = 0; - bh->state = BUF_STATE_FULL; - break; - } - - /* Perform the read */ - file_offset_tmp = file_offset; - nread = vfs_read(curlun->filp, - (char __user *) bh->buf, - amount, &file_offset_tmp); - VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, - (unsigned long long) file_offset, - (int) nread); - if (signal_pending(current)) - return -EINTR; - - if (nread < 0) { - LDBG(curlun, "error in file read: %d\n", - (int) nread); - nread = 0; - } else if (nread < amount) { - LDBG(curlun, "partial file read: %d/%u\n", - (int) nread, amount); - nread = round_down(nread, curlun->blksize); - } - file_offset += nread; - amount_left -= nread; - fsg->residue -= nread; - - /* Except at the end of the transfer, nread will be - * equal to the buffer size, which is divisible by the - * bulk-in maxpacket size. - */ - bh->inreq->length = nread; - bh->state = BUF_STATE_FULL; - - /* If an error occurred, report it and its position */ - if (nread < amount) { - curlun->sense_data = SS_UNRECOVERED_READ_ERROR; - curlun->sense_data_info = file_offset >> curlun->blkbits; - curlun->info_valid = 1; - break; - } - - if (amount_left == 0) - break; // No more left to read - - /* Send this buffer and go read some more */ - bh->inreq->zero = 0; - start_transfer(fsg, fsg->bulk_in, bh->inreq, - &bh->inreq_busy, &bh->state); - fsg->next_buffhd_to_fill = bh->next; - } - - return -EIO; // No default reply -} - - -/*-------------------------------------------------------------------------*/ - -static int do_write(struct fsg_dev *fsg) -{ - struct fsg_lun *curlun = fsg->curlun; - u32 lba; - struct fsg_buffhd *bh; - int get_some_more; - u32 amount_left_to_req, amount_left_to_write; - loff_t usb_offset, file_offset, file_offset_tmp; - unsigned int amount; - ssize_t nwritten; - int rc; - - if (curlun->ro) { - curlun->sense_data = SS_WRITE_PROTECTED; - return -EINVAL; - } - spin_lock(&curlun->filp->f_lock); - curlun->filp->f_flags &= ~O_SYNC; // Default is not to wait - spin_unlock(&curlun->filp->f_lock); - - /* Get the starting Logical Block Address and check that it's - * not too big */ - if (fsg->cmnd[0] == WRITE_6) - lba = get_unaligned_be24(&fsg->cmnd[1]); - else { - lba = get_unaligned_be32(&fsg->cmnd[2]); - - /* We allow DPO (Disable Page Out = don't save data in the - * cache) and FUA (Force Unit Access = write directly to the - * medium). We don't implement DPO; we implement FUA by - * performing synchronous output. */ - if ((fsg->cmnd[1] & ~0x18) != 0) { - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - /* FUA */ - if (!curlun->nofua && (fsg->cmnd[1] & 0x08)) { - spin_lock(&curlun->filp->f_lock); - curlun->filp->f_flags |= O_DSYNC; - spin_unlock(&curlun->filp->f_lock); - } - } - if (lba >= curlun->num_sectors) { - curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - return -EINVAL; - } - - /* Carry out the file writes */ - get_some_more = 1; - file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits; - amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd; - - while (amount_left_to_write > 0) { - - /* Queue a request for more data from the host */ - bh = fsg->next_buffhd_to_fill; - if (bh->state == BUF_STATE_EMPTY && get_some_more) { - - /* Figure out how much we want to get: - * Try to get the remaining amount, - * but not more than the buffer size. - */ - amount = min(amount_left_to_req, mod_data.buflen); - - /* Beyond the end of the backing file? */ - if (usb_offset >= curlun->file_length) { - get_some_more = 0; - curlun->sense_data = - SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = usb_offset >> curlun->blkbits; - curlun->info_valid = 1; - continue; - } - - /* Get the next buffer */ - usb_offset += amount; - fsg->usb_amount_left -= amount; - amount_left_to_req -= amount; - if (amount_left_to_req == 0) - get_some_more = 0; - - /* Except at the end of the transfer, amount will be - * equal to the buffer size, which is divisible by - * the bulk-out maxpacket size. - */ - set_bulk_out_req_length(fsg, bh, amount); - start_transfer(fsg, fsg->bulk_out, bh->outreq, - &bh->outreq_busy, &bh->state); - fsg->next_buffhd_to_fill = bh->next; - continue; - } - - /* Write the received data to the backing file */ - bh = fsg->next_buffhd_to_drain; - if (bh->state == BUF_STATE_EMPTY && !get_some_more) - break; // We stopped early - if (bh->state == BUF_STATE_FULL) { - smp_rmb(); - fsg->next_buffhd_to_drain = bh->next; - bh->state = BUF_STATE_EMPTY; - - /* Did something go wrong with the transfer? */ - if (bh->outreq->status != 0) { - curlun->sense_data = SS_COMMUNICATION_FAILURE; - curlun->sense_data_info = file_offset >> curlun->blkbits; - curlun->info_valid = 1; - break; - } - - amount = bh->outreq->actual; - if (curlun->file_length - file_offset < amount) { - LERROR(curlun, - "write %u @ %llu beyond end %llu\n", - amount, (unsigned long long) file_offset, - (unsigned long long) curlun->file_length); - amount = curlun->file_length - file_offset; - } - - /* Don't accept excess data. The spec doesn't say - * what to do in this case. We'll ignore the error. - */ - amount = min(amount, bh->bulk_out_intended_length); - - /* Don't write a partial block */ - amount = round_down(amount, curlun->blksize); - if (amount == 0) - goto empty_write; - - /* Perform the write */ - file_offset_tmp = file_offset; - nwritten = vfs_write(curlun->filp, - (char __user *) bh->buf, - amount, &file_offset_tmp); - VLDBG(curlun, "file write %u @ %llu -> %d\n", amount, - (unsigned long long) file_offset, - (int) nwritten); - if (signal_pending(current)) - return -EINTR; // Interrupted! - - if (nwritten < 0) { - LDBG(curlun, "error in file write: %d\n", - (int) nwritten); - nwritten = 0; - } else if (nwritten < amount) { - LDBG(curlun, "partial file write: %d/%u\n", - (int) nwritten, amount); - nwritten = round_down(nwritten, curlun->blksize); - } - file_offset += nwritten; - amount_left_to_write -= nwritten; - fsg->residue -= nwritten; - - /* If an error occurred, report it and its position */ - if (nwritten < amount) { - curlun->sense_data = SS_WRITE_ERROR; - curlun->sense_data_info = file_offset >> curlun->blkbits; - curlun->info_valid = 1; - break; - } - - empty_write: - /* Did the host decide to stop early? */ - if (bh->outreq->actual < bh->bulk_out_intended_length) { - fsg->short_packet_received = 1; - break; - } - continue; - } - - /* Wait for something to happen */ - rc = sleep_thread(fsg); - if (rc) - return rc; - } - - return -EIO; // No default reply -} - - -/*-------------------------------------------------------------------------*/ - -static int do_synchronize_cache(struct fsg_dev *fsg) -{ - struct fsg_lun *curlun = fsg->curlun; - int rc; - - /* We ignore the requested LBA and write out all file's - * dirty data buffers. */ - rc = fsg_lun_fsync_sub(curlun); - if (rc) - curlun->sense_data = SS_WRITE_ERROR; - return 0; -} - - -/*-------------------------------------------------------------------------*/ - -static void invalidate_sub(struct fsg_lun *curlun) -{ - struct file *filp = curlun->filp; - struct inode *inode = filp->f_path.dentry->d_inode; - unsigned long rc; - - rc = invalidate_mapping_pages(inode->i_mapping, 0, -1); - VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc); -} - -static int do_verify(struct fsg_dev *fsg) -{ - struct fsg_lun *curlun = fsg->curlun; - u32 lba; - u32 verification_length; - struct fsg_buffhd *bh = fsg->next_buffhd_to_fill; - loff_t file_offset, file_offset_tmp; - u32 amount_left; - unsigned int amount; - ssize_t nread; - - /* Get the starting Logical Block Address and check that it's - * not too big */ - lba = get_unaligned_be32(&fsg->cmnd[2]); - if (lba >= curlun->num_sectors) { - curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - return -EINVAL; - } - - /* We allow DPO (Disable Page Out = don't save data in the - * cache) but we don't implement it. */ - if ((fsg->cmnd[1] & ~0x10) != 0) { - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - - verification_length = get_unaligned_be16(&fsg->cmnd[7]); - if (unlikely(verification_length == 0)) - return -EIO; // No default reply - - /* Prepare to carry out the file verify */ - amount_left = verification_length << curlun->blkbits; - file_offset = ((loff_t) lba) << curlun->blkbits; - - /* Write out all the dirty buffers before invalidating them */ - fsg_lun_fsync_sub(curlun); - if (signal_pending(current)) - return -EINTR; - - invalidate_sub(curlun); - if (signal_pending(current)) - return -EINTR; - - /* Just try to read the requested blocks */ - while (amount_left > 0) { - - /* Figure out how much we need to read: - * Try to read the remaining amount, but not more than - * the buffer size. - * And don't try to read past the end of the file. - */ - amount = min((unsigned int) amount_left, mod_data.buflen); - amount = min((loff_t) amount, - curlun->file_length - file_offset); - if (amount == 0) { - curlun->sense_data = - SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = file_offset >> curlun->blkbits; - curlun->info_valid = 1; - break; - } - - /* Perform the read */ - file_offset_tmp = file_offset; - nread = vfs_read(curlun->filp, - (char __user *) bh->buf, - amount, &file_offset_tmp); - VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, - (unsigned long long) file_offset, - (int) nread); - if (signal_pending(current)) - return -EINTR; - - if (nread < 0) { - LDBG(curlun, "error in file verify: %d\n", - (int) nread); - nread = 0; - } else if (nread < amount) { - LDBG(curlun, "partial file verify: %d/%u\n", - (int) nread, amount); - nread = round_down(nread, curlun->blksize); - } - if (nread == 0) { - curlun->sense_data = SS_UNRECOVERED_READ_ERROR; - curlun->sense_data_info = file_offset >> curlun->blkbits; - curlun->info_valid = 1; - break; - } - file_offset += nread; - amount_left -= nread; - } - return 0; -} - - -/*-------------------------------------------------------------------------*/ - -static int do_inquiry(struct fsg_dev *fsg, struct fsg_buffhd *bh) -{ - u8 *buf = (u8 *) bh->buf; - - static char vendor_id[] = "Linux "; - static char product_disk_id[] = "File-Stor Gadget"; - static char product_cdrom_id[] = "File-CD Gadget "; - - if (!fsg->curlun) { // Unsupported LUNs are okay - fsg->bad_lun_okay = 1; - memset(buf, 0, 36); - buf[0] = 0x7f; // Unsupported, no device-type - buf[4] = 31; // Additional length - return 36; - } - - memset(buf, 0, 8); - buf[0] = (mod_data.cdrom ? TYPE_ROM : TYPE_DISK); - if (mod_data.removable) - buf[1] = 0x80; - buf[2] = 2; // ANSI SCSI level 2 - buf[3] = 2; // SCSI-2 INQUIRY data format - buf[4] = 31; // Additional length - // No special options - sprintf(buf + 8, "%-8s%-16s%04x", vendor_id, - (mod_data.cdrom ? product_cdrom_id : - product_disk_id), - mod_data.release); - return 36; -} - - -static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh) -{ - struct fsg_lun *curlun = fsg->curlun; - u8 *buf = (u8 *) bh->buf; - u32 sd, sdinfo; - int valid; - - /* - * From the SCSI-2 spec., section 7.9 (Unit attention condition): - * - * If a REQUEST SENSE command is received from an initiator - * with a pending unit attention condition (before the target - * generates the contingent allegiance condition), then the - * target shall either: - * a) report any pending sense data and preserve the unit - * attention condition on the logical unit, or, - * b) report the unit attention condition, may discard any - * pending sense data, and clear the unit attention - * condition on the logical unit for that initiator. - * - * FSG normally uses option a); enable this code to use option b). - */ -#if 0 - if (curlun && curlun->unit_attention_data != SS_NO_SENSE) { - curlun->sense_data = curlun->unit_attention_data; - curlun->unit_attention_data = SS_NO_SENSE; - } -#endif - - if (!curlun) { // Unsupported LUNs are okay - fsg->bad_lun_okay = 1; - sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; - sdinfo = 0; - valid = 0; - } else { - sd = curlun->sense_data; - sdinfo = curlun->sense_data_info; - valid = curlun->info_valid << 7; - curlun->sense_data = SS_NO_SENSE; - curlun->sense_data_info = 0; - curlun->info_valid = 0; - } - - memset(buf, 0, 18); - buf[0] = valid | 0x70; // Valid, current error - buf[2] = SK(sd); - put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */ - buf[7] = 18 - 8; // Additional sense length - buf[12] = ASC(sd); - buf[13] = ASCQ(sd); - return 18; -} - - -static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh) -{ - struct fsg_lun *curlun = fsg->curlun; - u32 lba = get_unaligned_be32(&fsg->cmnd[2]); - int pmi = fsg->cmnd[8]; - u8 *buf = (u8 *) bh->buf; - - /* Check the PMI and LBA fields */ - if (pmi > 1 || (pmi == 0 && lba != 0)) { - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - - put_unaligned_be32(curlun->num_sectors - 1, &buf[0]); - /* Max logical block */ - put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */ - return 8; -} - - -static int do_read_header(struct fsg_dev *fsg, struct fsg_buffhd *bh) -{ - struct fsg_lun *curlun = fsg->curlun; - int msf = fsg->cmnd[1] & 0x02; - u32 lba = get_unaligned_be32(&fsg->cmnd[2]); - u8 *buf = (u8 *) bh->buf; - - if ((fsg->cmnd[1] & ~0x02) != 0) { /* Mask away MSF */ - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - if (lba >= curlun->num_sectors) { - curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - return -EINVAL; - } - - memset(buf, 0, 8); - buf[0] = 0x01; /* 2048 bytes of user data, rest is EC */ - store_cdrom_address(&buf[4], msf, lba); - return 8; -} - - -static int do_read_toc(struct fsg_dev *fsg, struct fsg_buffhd *bh) -{ - struct fsg_lun *curlun = fsg->curlun; - int msf = fsg->cmnd[1] & 0x02; - int start_track = fsg->cmnd[6]; - u8 *buf = (u8 *) bh->buf; - - if ((fsg->cmnd[1] & ~0x02) != 0 || /* Mask away MSF */ - start_track > 1) { - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - - memset(buf, 0, 20); - buf[1] = (20-2); /* TOC data length */ - buf[2] = 1; /* First track number */ - buf[3] = 1; /* Last track number */ - buf[5] = 0x16; /* Data track, copying allowed */ - buf[6] = 0x01; /* Only track is number 1 */ - store_cdrom_address(&buf[8], msf, 0); - - buf[13] = 0x16; /* Lead-out track is data */ - buf[14] = 0xAA; /* Lead-out track number */ - store_cdrom_address(&buf[16], msf, curlun->num_sectors); - return 20; -} - - -static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh) -{ - struct fsg_lun *curlun = fsg->curlun; - int mscmnd = fsg->cmnd[0]; - u8 *buf = (u8 *) bh->buf; - u8 *buf0 = buf; - int pc, page_code; - int changeable_values, all_pages; - int valid_page = 0; - int len, limit; - - if ((fsg->cmnd[1] & ~0x08) != 0) { // Mask away DBD - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - pc = fsg->cmnd[2] >> 6; - page_code = fsg->cmnd[2] & 0x3f; - if (pc == 3) { - curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED; - return -EINVAL; - } - changeable_values = (pc == 1); - all_pages = (page_code == 0x3f); - - /* Write the mode parameter header. Fixed values are: default - * medium type, no cache control (DPOFUA), and no block descriptors. - * The only variable value is the WriteProtect bit. We will fill in - * the mode data length later. */ - memset(buf, 0, 8); - if (mscmnd == MODE_SENSE) { - buf[2] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA - buf += 4; - limit = 255; - } else { // MODE_SENSE_10 - buf[3] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA - buf += 8; - limit = 65535; // Should really be mod_data.buflen - } - - /* No block descriptors */ - - /* The mode pages, in numerical order. The only page we support - * is the Caching page. */ - if (page_code == 0x08 || all_pages) { - valid_page = 1; - buf[0] = 0x08; // Page code - buf[1] = 10; // Page length - memset(buf+2, 0, 10); // None of the fields are changeable - - if (!changeable_values) { - buf[2] = 0x04; // Write cache enable, - // Read cache not disabled - // No cache retention priorities - put_unaligned_be16(0xffff, &buf[4]); - /* Don't disable prefetch */ - /* Minimum prefetch = 0 */ - put_unaligned_be16(0xffff, &buf[8]); - /* Maximum prefetch */ - put_unaligned_be16(0xffff, &buf[10]); - /* Maximum prefetch ceiling */ - } - buf += 12; - } - - /* Check that a valid page was requested and the mode data length - * isn't too long. */ - len = buf - buf0; - if (!valid_page || len > limit) { - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - - /* Store the mode data length */ - if (mscmnd == MODE_SENSE) - buf0[0] = len - 1; - else - put_unaligned_be16(len - 2, buf0); - return len; -} - - -static int do_start_stop(struct fsg_dev *fsg) -{ - struct fsg_lun *curlun = fsg->curlun; - int loej, start; - - if (!mod_data.removable) { - curlun->sense_data = SS_INVALID_COMMAND; - return -EINVAL; - } - - // int immed = fsg->cmnd[1] & 0x01; - loej = fsg->cmnd[4] & 0x02; - start = fsg->cmnd[4] & 0x01; - -#ifdef CONFIG_USB_FILE_STORAGE_TEST - if ((fsg->cmnd[1] & ~0x01) != 0 || // Mask away Immed - (fsg->cmnd[4] & ~0x03) != 0) { // Mask LoEj, Start - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - - if (!start) { - - /* Are we allowed to unload the media? */ - if (curlun->prevent_medium_removal) { - LDBG(curlun, "unload attempt prevented\n"); - curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED; - return -EINVAL; - } - if (loej) { // Simulate an unload/eject - up_read(&fsg->filesem); - down_write(&fsg->filesem); - fsg_lun_close(curlun); - up_write(&fsg->filesem); - down_read(&fsg->filesem); - } - } else { - - /* Our emulation doesn't support mounting; the medium is - * available for use as soon as it is loaded. */ - if (!fsg_lun_is_open(curlun)) { - curlun->sense_data = SS_MEDIUM_NOT_PRESENT; - return -EINVAL; - } - } -#endif - return 0; -} - - -static int do_prevent_allow(struct fsg_dev *fsg) -{ - struct fsg_lun *curlun = fsg->curlun; - int prevent; - - if (!mod_data.removable) { - curlun->sense_data = SS_INVALID_COMMAND; - return -EINVAL; - } - - prevent = fsg->cmnd[4] & 0x01; - if ((fsg->cmnd[4] & ~0x01) != 0) { // Mask away Prevent - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - - if (curlun->prevent_medium_removal && !prevent) - fsg_lun_fsync_sub(curlun); - curlun->prevent_medium_removal = prevent; - return 0; -} - - -static int do_read_format_capacities(struct fsg_dev *fsg, - struct fsg_buffhd *bh) -{ - struct fsg_lun *curlun = fsg->curlun; - u8 *buf = (u8 *) bh->buf; - - buf[0] = buf[1] = buf[2] = 0; - buf[3] = 8; // Only the Current/Maximum Capacity Descriptor - buf += 4; - - put_unaligned_be32(curlun->num_sectors, &buf[0]); - /* Number of blocks */ - put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */ - buf[4] = 0x02; /* Current capacity */ - return 12; -} - - -static int do_mode_select(struct fsg_dev *fsg, struct fsg_buffhd *bh) -{ - struct fsg_lun *curlun = fsg->curlun; - - /* We don't support MODE SELECT */ - curlun->sense_data = SS_INVALID_COMMAND; - return -EINVAL; -} - - -/*-------------------------------------------------------------------------*/ - -static int halt_bulk_in_endpoint(struct fsg_dev *fsg) -{ - int rc; - - rc = fsg_set_halt(fsg, fsg->bulk_in); - if (rc == -EAGAIN) - VDBG(fsg, "delayed bulk-in endpoint halt\n"); - while (rc != 0) { - if (rc != -EAGAIN) { - WARNING(fsg, "usb_ep_set_halt -> %d\n", rc); - rc = 0; - break; - } - - /* Wait for a short time and then try again */ - if (msleep_interruptible(100) != 0) - return -EINTR; - rc = usb_ep_set_halt(fsg->bulk_in); - } - return rc; -} - -static int wedge_bulk_in_endpoint(struct fsg_dev *fsg) -{ - int rc; - - DBG(fsg, "bulk-in set wedge\n"); - rc = usb_ep_set_wedge(fsg->bulk_in); - if (rc == -EAGAIN) - VDBG(fsg, "delayed bulk-in endpoint wedge\n"); - while (rc != 0) { - if (rc != -EAGAIN) { - WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc); - rc = 0; - break; - } - - /* Wait for a short time and then try again */ - if (msleep_interruptible(100) != 0) - return -EINTR; - rc = usb_ep_set_wedge(fsg->bulk_in); - } - return rc; -} - -static int throw_away_data(struct fsg_dev *fsg) -{ - struct fsg_buffhd *bh; - u32 amount; - int rc; - - while ((bh = fsg->next_buffhd_to_drain)->state != BUF_STATE_EMPTY || - fsg->usb_amount_left > 0) { - - /* Throw away the data in a filled buffer */ - if (bh->state == BUF_STATE_FULL) { - smp_rmb(); - bh->state = BUF_STATE_EMPTY; - fsg->next_buffhd_to_drain = bh->next; - - /* A short packet or an error ends everything */ - if (bh->outreq->actual < bh->bulk_out_intended_length || - bh->outreq->status != 0) { - raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); - return -EINTR; - } - continue; - } - - /* Try to submit another request if we need one */ - bh = fsg->next_buffhd_to_fill; - if (bh->state == BUF_STATE_EMPTY && fsg->usb_amount_left > 0) { - amount = min(fsg->usb_amount_left, - (u32) mod_data.buflen); - - /* Except at the end of the transfer, amount will be - * equal to the buffer size, which is divisible by - * the bulk-out maxpacket size. - */ - set_bulk_out_req_length(fsg, bh, amount); - start_transfer(fsg, fsg->bulk_out, bh->outreq, - &bh->outreq_busy, &bh->state); - fsg->next_buffhd_to_fill = bh->next; - fsg->usb_amount_left -= amount; - continue; - } - - /* Otherwise wait for something to happen */ - rc = sleep_thread(fsg); - if (rc) - return rc; - } - return 0; -} - - -static int finish_reply(struct fsg_dev *fsg) -{ - struct fsg_buffhd *bh = fsg->next_buffhd_to_fill; - int rc = 0; - - switch (fsg->data_dir) { - case DATA_DIR_NONE: - break; // Nothing to send - - /* If we don't know whether the host wants to read or write, - * this must be CB or CBI with an unknown command. We mustn't - * try to send or receive any data. So stall both bulk pipes - * if we can and wait for a reset. */ - case DATA_DIR_UNKNOWN: - if (mod_data.can_stall) { - fsg_set_halt(fsg, fsg->bulk_out); - rc = halt_bulk_in_endpoint(fsg); - } - break; - - /* All but the last buffer of data must have already been sent */ - case DATA_DIR_TO_HOST: - if (fsg->data_size == 0) - ; // Nothing to send - - /* If there's no residue, simply send the last buffer */ - else if (fsg->residue == 0) { - bh->inreq->zero = 0; - start_transfer(fsg, fsg->bulk_in, bh->inreq, - &bh->inreq_busy, &bh->state); - fsg->next_buffhd_to_fill = bh->next; - } - - /* There is a residue. For CB and CBI, simply mark the end - * of the data with a short packet. However, if we are - * allowed to stall, there was no data at all (residue == - * data_size), and the command failed (invalid LUN or - * sense data is set), then halt the bulk-in endpoint - * instead. */ - else if (!transport_is_bbb()) { - if (mod_data.can_stall && - fsg->residue == fsg->data_size && - (!fsg->curlun || fsg->curlun->sense_data != SS_NO_SENSE)) { - bh->state = BUF_STATE_EMPTY; - rc = halt_bulk_in_endpoint(fsg); - } else { - bh->inreq->zero = 1; - start_transfer(fsg, fsg->bulk_in, bh->inreq, - &bh->inreq_busy, &bh->state); - fsg->next_buffhd_to_fill = bh->next; - } - } - - /* - * For Bulk-only, mark the end of the data with a short - * packet. If we are allowed to stall, halt the bulk-in - * endpoint. (Note: This violates the Bulk-Only Transport - * specification, which requires us to pad the data if we - * don't halt the endpoint. Presumably nobody will mind.) - */ - else { - bh->inreq->zero = 1; - start_transfer(fsg, fsg->bulk_in, bh->inreq, - &bh->inreq_busy, &bh->state); - fsg->next_buffhd_to_fill = bh->next; - if (mod_data.can_stall) - rc = halt_bulk_in_endpoint(fsg); - } - break; - - /* We have processed all we want from the data the host has sent. - * There may still be outstanding bulk-out requests. */ - case DATA_DIR_FROM_HOST: - if (fsg->residue == 0) - ; // Nothing to receive - - /* Did the host stop sending unexpectedly early? */ - else if (fsg->short_packet_received) { - raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); - rc = -EINTR; - } - - /* We haven't processed all the incoming data. Even though - * we may be allowed to stall, doing so would cause a race. - * The controller may already have ACK'ed all the remaining - * bulk-out packets, in which case the host wouldn't see a - * STALL. Not realizing the endpoint was halted, it wouldn't - * clear the halt -- leading to problems later on. */ -#if 0 - else if (mod_data.can_stall) { - fsg_set_halt(fsg, fsg->bulk_out); - raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); - rc = -EINTR; - } -#endif - - /* We can't stall. Read in the excess data and throw it - * all away. */ - else - rc = throw_away_data(fsg); - break; - } - return rc; -} - - -static int send_status(struct fsg_dev *fsg) -{ - struct fsg_lun *curlun = fsg->curlun; - struct fsg_buffhd *bh; - int rc; - u8 status = US_BULK_STAT_OK; - u32 sd, sdinfo = 0; - - /* Wait for the next buffer to become available */ - bh = fsg->next_buffhd_to_fill; - while (bh->state != BUF_STATE_EMPTY) { - rc = sleep_thread(fsg); - if (rc) - return rc; - } - - if (curlun) { - sd = curlun->sense_data; - sdinfo = curlun->sense_data_info; - } else if (fsg->bad_lun_okay) - sd = SS_NO_SENSE; - else - sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; - - if (fsg->phase_error) { - DBG(fsg, "sending phase-error status\n"); - status = US_BULK_STAT_PHASE; - sd = SS_INVALID_COMMAND; - } else if (sd != SS_NO_SENSE) { - DBG(fsg, "sending command-failure status\n"); - status = US_BULK_STAT_FAIL; - VDBG(fsg, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;" - " info x%x\n", - SK(sd), ASC(sd), ASCQ(sd), sdinfo); - } - - if (transport_is_bbb()) { - struct bulk_cs_wrap *csw = bh->buf; - - /* Store and send the Bulk-only CSW */ - csw->Signature = cpu_to_le32(US_BULK_CS_SIGN); - csw->Tag = fsg->tag; - csw->Residue = cpu_to_le32(fsg->residue); - csw->Status = status; - - bh->inreq->length = US_BULK_CS_WRAP_LEN; - bh->inreq->zero = 0; - start_transfer(fsg, fsg->bulk_in, bh->inreq, - &bh->inreq_busy, &bh->state); - - } else if (mod_data.transport_type == USB_PR_CB) { - - /* Control-Bulk transport has no status phase! */ - return 0; - - } else { // USB_PR_CBI - struct interrupt_data *buf = bh->buf; - - /* Store and send the Interrupt data. UFI sends the ASC - * and ASCQ bytes. Everything else sends a Type (which - * is always 0) and the status Value. */ - if (mod_data.protocol_type == USB_SC_UFI) { - buf->bType = ASC(sd); - buf->bValue = ASCQ(sd); - } else { - buf->bType = 0; - buf->bValue = status; - } - fsg->intreq->length = CBI_INTERRUPT_DATA_LEN; - - fsg->intr_buffhd = bh; // Point to the right buffhd - fsg->intreq->buf = bh->inreq->buf; - fsg->intreq->context = bh; - start_transfer(fsg, fsg->intr_in, fsg->intreq, - &fsg->intreq_busy, &bh->state); - } - - fsg->next_buffhd_to_fill = bh->next; - return 0; -} - - -/*-------------------------------------------------------------------------*/ - -/* Check whether the command is properly formed and whether its data size - * and direction agree with the values we already have. */ -static int check_command(struct fsg_dev *fsg, int cmnd_size, - enum data_direction data_dir, unsigned int mask, - int needs_medium, const char *name) -{ - int i; - int lun = fsg->cmnd[1] >> 5; - static const char dirletter[4] = {'u', 'o', 'i', 'n'}; - char hdlen[20]; - struct fsg_lun *curlun; - - /* Adjust the expected cmnd_size for protocol encapsulation padding. - * Transparent SCSI doesn't pad. */ - if (protocol_is_scsi()) - ; - - /* There's some disagreement as to whether RBC pads commands or not. - * We'll play it safe and accept either form. */ - else if (mod_data.protocol_type == USB_SC_RBC) { - if (fsg->cmnd_size == 12) - cmnd_size = 12; - - /* All the other protocols pad to 12 bytes */ - } else - cmnd_size = 12; - - hdlen[0] = 0; - if (fsg->data_dir != DATA_DIR_UNKNOWN) - sprintf(hdlen, ", H%c=%u", dirletter[(int) fsg->data_dir], - fsg->data_size); - VDBG(fsg, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n", - name, cmnd_size, dirletter[(int) data_dir], - fsg->data_size_from_cmnd, fsg->cmnd_size, hdlen); - - /* We can't reply at all until we know the correct data direction - * and size. */ - if (fsg->data_size_from_cmnd == 0) - data_dir = DATA_DIR_NONE; - if (fsg->data_dir == DATA_DIR_UNKNOWN) { // CB or CBI - fsg->data_dir = data_dir; - fsg->data_size = fsg->data_size_from_cmnd; - - } else { // Bulk-only - if (fsg->data_size < fsg->data_size_from_cmnd) { - - /* Host data size < Device data size is a phase error. - * Carry out the command, but only transfer as much - * as we are allowed. */ - fsg->data_size_from_cmnd = fsg->data_size; - fsg->phase_error = 1; - } - } - fsg->residue = fsg->usb_amount_left = fsg->data_size; - - /* Conflicting data directions is a phase error */ - if (fsg->data_dir != data_dir && fsg->data_size_from_cmnd > 0) { - fsg->phase_error = 1; - return -EINVAL; - } - - /* Verify the length of the command itself */ - if (cmnd_size != fsg->cmnd_size) { - - /* Special case workaround: There are plenty of buggy SCSI - * implementations. Many have issues with cbw->Length - * field passing a wrong command size. For those cases we - * always try to work around the problem by using the length - * sent by the host side provided it is at least as large - * as the correct command length. - * Examples of such cases would be MS-Windows, which issues - * REQUEST SENSE with cbw->Length == 12 where it should - * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and - * REQUEST SENSE with cbw->Length == 10 where it should - * be 6 as well. - */ - if (cmnd_size <= fsg->cmnd_size) { - DBG(fsg, "%s is buggy! Expected length %d " - "but we got %d\n", name, - cmnd_size, fsg->cmnd_size); - cmnd_size = fsg->cmnd_size; - } else { - fsg->phase_error = 1; - return -EINVAL; - } - } - - /* Check that the LUN values are consistent */ - if (transport_is_bbb()) { - if (fsg->lun != lun) - DBG(fsg, "using LUN %d from CBW, " - "not LUN %d from CDB\n", - fsg->lun, lun); - } - - /* Check the LUN */ - curlun = fsg->curlun; - if (curlun) { - if (fsg->cmnd[0] != REQUEST_SENSE) { - curlun->sense_data = SS_NO_SENSE; - curlun->sense_data_info = 0; - curlun->info_valid = 0; - } - } else { - fsg->bad_lun_okay = 0; - - /* INQUIRY and REQUEST SENSE commands are explicitly allowed - * to use unsupported LUNs; all others may not. */ - if (fsg->cmnd[0] != INQUIRY && - fsg->cmnd[0] != REQUEST_SENSE) { - DBG(fsg, "unsupported LUN %d\n", fsg->lun); - return -EINVAL; - } - } - - /* If a unit attention condition exists, only INQUIRY and - * REQUEST SENSE commands are allowed; anything else must fail. */ - if (curlun && curlun->unit_attention_data != SS_NO_SENSE && - fsg->cmnd[0] != INQUIRY && - fsg->cmnd[0] != REQUEST_SENSE) { - curlun->sense_data = curlun->unit_attention_data; - curlun->unit_attention_data = SS_NO_SENSE; - return -EINVAL; - } - - /* Check that only command bytes listed in the mask are non-zero */ - fsg->cmnd[1] &= 0x1f; // Mask away the LUN - for (i = 1; i < cmnd_size; ++i) { - if (fsg->cmnd[i] && !(mask & (1 << i))) { - if (curlun) - curlun->sense_data = SS_INVALID_FIELD_IN_CDB; - return -EINVAL; - } - } - - /* If the medium isn't mounted and the command needs to access - * it, return an error. */ - if (curlun && !fsg_lun_is_open(curlun) && needs_medium) { - curlun->sense_data = SS_MEDIUM_NOT_PRESENT; - return -EINVAL; - } - - return 0; -} - -/* wrapper of check_command for data size in blocks handling */ -static int check_command_size_in_blocks(struct fsg_dev *fsg, int cmnd_size, - enum data_direction data_dir, unsigned int mask, - int needs_medium, const char *name) -{ - if (fsg->curlun) - fsg->data_size_from_cmnd <<= fsg->curlun->blkbits; - return check_command(fsg, cmnd_size, data_dir, - mask, needs_medium, name); -} - -static int do_scsi_command(struct fsg_dev *fsg) -{ - struct fsg_buffhd *bh; - int rc; - int reply = -EINVAL; - int i; - static char unknown[16]; - - dump_cdb(fsg); - - /* Wait for the next buffer to become available for data or status */ - bh = fsg->next_buffhd_to_drain = fsg->next_buffhd_to_fill; - while (bh->state != BUF_STATE_EMPTY) { - rc = sleep_thread(fsg); - if (rc) - return rc; - } - fsg->phase_error = 0; - fsg->short_packet_received = 0; - - down_read(&fsg->filesem); // We're using the backing file - switch (fsg->cmnd[0]) { - - case INQUIRY: - fsg->data_size_from_cmnd = fsg->cmnd[4]; - if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, - (1<<4), 0, - "INQUIRY")) == 0) - reply = do_inquiry(fsg, bh); - break; - - case MODE_SELECT: - fsg->data_size_from_cmnd = fsg->cmnd[4]; - if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST, - (1<<1) | (1<<4), 0, - "MODE SELECT(6)")) == 0) - reply = do_mode_select(fsg, bh); - break; - - case MODE_SELECT_10: - fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); - if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST, - (1<<1) | (3<<7), 0, - "MODE SELECT(10)")) == 0) - reply = do_mode_select(fsg, bh); - break; - - case MODE_SENSE: - fsg->data_size_from_cmnd = fsg->cmnd[4]; - if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, - (1<<1) | (1<<2) | (1<<4), 0, - "MODE SENSE(6)")) == 0) - reply = do_mode_sense(fsg, bh); - break; - - case MODE_SENSE_10: - fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); - if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, - (1<<1) | (1<<2) | (3<<7), 0, - "MODE SENSE(10)")) == 0) - reply = do_mode_sense(fsg, bh); - break; - - case ALLOW_MEDIUM_REMOVAL: - fsg->data_size_from_cmnd = 0; - if ((reply = check_command(fsg, 6, DATA_DIR_NONE, - (1<<4), 0, - "PREVENT-ALLOW MEDIUM REMOVAL")) == 0) - reply = do_prevent_allow(fsg); - break; - - case READ_6: - i = fsg->cmnd[4]; - fsg->data_size_from_cmnd = (i == 0) ? 256 : i; - if ((reply = check_command_size_in_blocks(fsg, 6, - DATA_DIR_TO_HOST, - (7<<1) | (1<<4), 1, - "READ(6)")) == 0) - reply = do_read(fsg); - break; - - case READ_10: - fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); - if ((reply = check_command_size_in_blocks(fsg, 10, - DATA_DIR_TO_HOST, - (1<<1) | (0xf<<2) | (3<<7), 1, - "READ(10)")) == 0) - reply = do_read(fsg); - break; - - case READ_12: - fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]); - if ((reply = check_command_size_in_blocks(fsg, 12, - DATA_DIR_TO_HOST, - (1<<1) | (0xf<<2) | (0xf<<6), 1, - "READ(12)")) == 0) - reply = do_read(fsg); - break; - - case READ_CAPACITY: - fsg->data_size_from_cmnd = 8; - if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, - (0xf<<2) | (1<<8), 1, - "READ CAPACITY")) == 0) - reply = do_read_capacity(fsg, bh); - break; - - case READ_HEADER: - if (!mod_data.cdrom) - goto unknown_cmnd; - fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); - if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, - (3<<7) | (0x1f<<1), 1, - "READ HEADER")) == 0) - reply = do_read_header(fsg, bh); - break; - - case READ_TOC: - if (!mod_data.cdrom) - goto unknown_cmnd; - fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); - if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, - (7<<6) | (1<<1), 1, - "READ TOC")) == 0) - reply = do_read_toc(fsg, bh); - break; - - case READ_FORMAT_CAPACITIES: - fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); - if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, - (3<<7), 1, - "READ FORMAT CAPACITIES")) == 0) - reply = do_read_format_capacities(fsg, bh); - break; - - case REQUEST_SENSE: - fsg->data_size_from_cmnd = fsg->cmnd[4]; - if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, - (1<<4), 0, - "REQUEST SENSE")) == 0) - reply = do_request_sense(fsg, bh); - break; - - case START_STOP: - fsg->data_size_from_cmnd = 0; - if ((reply = check_command(fsg, 6, DATA_DIR_NONE, - (1<<1) | (1<<4), 0, - "START-STOP UNIT")) == 0) - reply = do_start_stop(fsg); - break; - - case SYNCHRONIZE_CACHE: - fsg->data_size_from_cmnd = 0; - if ((reply = check_command(fsg, 10, DATA_DIR_NONE, - (0xf<<2) | (3<<7), 1, - "SYNCHRONIZE CACHE")) == 0) - reply = do_synchronize_cache(fsg); - break; - - case TEST_UNIT_READY: - fsg->data_size_from_cmnd = 0; - reply = check_command(fsg, 6, DATA_DIR_NONE, - 0, 1, - "TEST UNIT READY"); - break; - - /* Although optional, this command is used by MS-Windows. We - * support a minimal version: BytChk must be 0. */ - case VERIFY: - fsg->data_size_from_cmnd = 0; - if ((reply = check_command(fsg, 10, DATA_DIR_NONE, - (1<<1) | (0xf<<2) | (3<<7), 1, - "VERIFY")) == 0) - reply = do_verify(fsg); - break; - - case WRITE_6: - i = fsg->cmnd[4]; - fsg->data_size_from_cmnd = (i == 0) ? 256 : i; - if ((reply = check_command_size_in_blocks(fsg, 6, - DATA_DIR_FROM_HOST, - (7<<1) | (1<<4), 1, - "WRITE(6)")) == 0) - reply = do_write(fsg); - break; - - case WRITE_10: - fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); - if ((reply = check_command_size_in_blocks(fsg, 10, - DATA_DIR_FROM_HOST, - (1<<1) | (0xf<<2) | (3<<7), 1, - "WRITE(10)")) == 0) - reply = do_write(fsg); - break; - - case WRITE_12: - fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]); - if ((reply = check_command_size_in_blocks(fsg, 12, - DATA_DIR_FROM_HOST, - (1<<1) | (0xf<<2) | (0xf<<6), 1, - "WRITE(12)")) == 0) - reply = do_write(fsg); - break; - - /* Some mandatory commands that we recognize but don't implement. - * They don't mean much in this setting. It's left as an exercise - * for anyone interested to implement RESERVE and RELEASE in terms - * of Posix locks. */ - case FORMAT_UNIT: - case RELEASE: - case RESERVE: - case SEND_DIAGNOSTIC: - // Fall through - - default: - unknown_cmnd: - fsg->data_size_from_cmnd = 0; - sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]); - if ((reply = check_command(fsg, fsg->cmnd_size, - DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) { - fsg->curlun->sense_data = SS_INVALID_COMMAND; - reply = -EINVAL; - } - break; - } - up_read(&fsg->filesem); - - if (reply == -EINTR || signal_pending(current)) - return -EINTR; - - /* Set up the single reply buffer for finish_reply() */ - if (reply == -EINVAL) - reply = 0; // Error reply length - if (reply >= 0 && fsg->data_dir == DATA_DIR_TO_HOST) { - reply = min((u32) reply, fsg->data_size_from_cmnd); - bh->inreq->length = reply; - bh->state = BUF_STATE_FULL; - fsg->residue -= reply; - } // Otherwise it's already set - - return 0; -} - - -/*-------------------------------------------------------------------------*/ - -static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) -{ - struct usb_request *req = bh->outreq; - struct bulk_cb_wrap *cbw = req->buf; - - /* Was this a real packet? Should it be ignored? */ - if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) - return -EINVAL; - - /* Is the CBW valid? */ - if (req->actual != US_BULK_CB_WRAP_LEN || - cbw->Signature != cpu_to_le32( - US_BULK_CB_SIGN)) { - DBG(fsg, "invalid CBW: len %u sig 0x%x\n", - req->actual, - le32_to_cpu(cbw->Signature)); - - /* The Bulk-only spec says we MUST stall the IN endpoint - * (6.6.1), so it's unavoidable. It also says we must - * retain this state until the next reset, but there's - * no way to tell the controller driver it should ignore - * Clear-Feature(HALT) requests. - * - * We aren't required to halt the OUT endpoint; instead - * we can simply accept and discard any data received - * until the next reset. */ - wedge_bulk_in_endpoint(fsg); - set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); - return -EINVAL; - } - - /* Is the CBW meaningful? */ - if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~US_BULK_FLAG_IN || - cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) { - DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, " - "cmdlen %u\n", - cbw->Lun, cbw->Flags, cbw->Length); - - /* We can do anything we want here, so let's stall the - * bulk pipes if we are allowed to. */ - if (mod_data.can_stall) { - fsg_set_halt(fsg, fsg->bulk_out); - halt_bulk_in_endpoint(fsg); - } - return -EINVAL; - } - - /* Save the command for later */ - fsg->cmnd_size = cbw->Length; - memcpy(fsg->cmnd, cbw->CDB, fsg->cmnd_size); - if (cbw->Flags & US_BULK_FLAG_IN) - fsg->data_dir = DATA_DIR_TO_HOST; - else - fsg->data_dir = DATA_DIR_FROM_HOST; - fsg->data_size = le32_to_cpu(cbw->DataTransferLength); - if (fsg->data_size == 0) - fsg->data_dir = DATA_DIR_NONE; - fsg->lun = cbw->Lun; - fsg->tag = cbw->Tag; - return 0; -} - - -static int get_next_command(struct fsg_dev *fsg) -{ - struct fsg_buffhd *bh; - int rc = 0; - - if (transport_is_bbb()) { - - /* Wait for the next buffer to become available */ - bh = fsg->next_buffhd_to_fill; - while (bh->state != BUF_STATE_EMPTY) { - rc = sleep_thread(fsg); - if (rc) - return rc; - } - - /* Queue a request to read a Bulk-only CBW */ - set_bulk_out_req_length(fsg, bh, US_BULK_CB_WRAP_LEN); - start_transfer(fsg, fsg->bulk_out, bh->outreq, - &bh->outreq_busy, &bh->state); - - /* We will drain the buffer in software, which means we - * can reuse it for the next filling. No need to advance - * next_buffhd_to_fill. */ - - /* Wait for the CBW to arrive */ - while (bh->state != BUF_STATE_FULL) { - rc = sleep_thread(fsg); - if (rc) - return rc; - } - smp_rmb(); - rc = received_cbw(fsg, bh); - bh->state = BUF_STATE_EMPTY; - - } else { // USB_PR_CB or USB_PR_CBI - - /* Wait for the next command to arrive */ - while (fsg->cbbuf_cmnd_size == 0) { - rc = sleep_thread(fsg); - if (rc) - return rc; - } - - /* Is the previous status interrupt request still busy? - * The host is allowed to skip reading the status, - * so we must cancel it. */ - if (fsg->intreq_busy) - usb_ep_dequeue(fsg->intr_in, fsg->intreq); - - /* Copy the command and mark the buffer empty */ - fsg->data_dir = DATA_DIR_UNKNOWN; - spin_lock_irq(&fsg->lock); - fsg->cmnd_size = fsg->cbbuf_cmnd_size; - memcpy(fsg->cmnd, fsg->cbbuf_cmnd, fsg->cmnd_size); - fsg->cbbuf_cmnd_size = 0; - spin_unlock_irq(&fsg->lock); - - /* Use LUN from the command */ - fsg->lun = fsg->cmnd[1] >> 5; - } - - /* Update current lun */ - if (fsg->lun >= 0 && fsg->lun < fsg->nluns) - fsg->curlun = &fsg->luns[fsg->lun]; - else - fsg->curlun = NULL; - - return rc; -} - - -/*-------------------------------------------------------------------------*/ - -static int enable_endpoint(struct fsg_dev *fsg, struct usb_ep *ep, - const struct usb_endpoint_descriptor *d) -{ - int rc; - - ep->driver_data = fsg; - ep->desc = d; - rc = usb_ep_enable(ep); - if (rc) - ERROR(fsg, "can't enable %s, result %d\n", ep->name, rc); - return rc; -} - -static int alloc_request(struct fsg_dev *fsg, struct usb_ep *ep, - struct usb_request **preq) -{ - *preq = usb_ep_alloc_request(ep, GFP_ATOMIC); - if (*preq) - return 0; - ERROR(fsg, "can't allocate request for %s\n", ep->name); - return -ENOMEM; -} - -/* - * Reset interface setting and re-init endpoint state (toggle etc). - * Call with altsetting < 0 to disable the interface. The only other - * available altsetting is 0, which enables the interface. - */ -static int do_set_interface(struct fsg_dev *fsg, int altsetting) -{ - int rc = 0; - int i; - const struct usb_endpoint_descriptor *d; - - if (fsg->running) - DBG(fsg, "reset interface\n"); - -reset: - /* Deallocate the requests */ - for (i = 0; i < fsg_num_buffers; ++i) { - struct fsg_buffhd *bh = &fsg->buffhds[i]; - - if (bh->inreq) { - usb_ep_free_request(fsg->bulk_in, bh->inreq); - bh->inreq = NULL; - } - if (bh->outreq) { - usb_ep_free_request(fsg->bulk_out, bh->outreq); - bh->outreq = NULL; - } - } - if (fsg->intreq) { - usb_ep_free_request(fsg->intr_in, fsg->intreq); - fsg->intreq = NULL; - } - - /* Disable the endpoints */ - if (fsg->bulk_in_enabled) { - usb_ep_disable(fsg->bulk_in); - fsg->bulk_in_enabled = 0; - } - if (fsg->bulk_out_enabled) { - usb_ep_disable(fsg->bulk_out); - fsg->bulk_out_enabled = 0; - } - if (fsg->intr_in_enabled) { - usb_ep_disable(fsg->intr_in); - fsg->intr_in_enabled = 0; - } - - fsg->running = 0; - if (altsetting < 0 || rc != 0) - return rc; - - DBG(fsg, "set interface %d\n", altsetting); - - /* Enable the endpoints */ - d = fsg_ep_desc(fsg->gadget, - &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc, - &fsg_ss_bulk_in_desc); - if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0) - goto reset; - fsg->bulk_in_enabled = 1; - - d = fsg_ep_desc(fsg->gadget, - &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc, - &fsg_ss_bulk_out_desc); - if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0) - goto reset; - fsg->bulk_out_enabled = 1; - fsg->bulk_out_maxpacket = usb_endpoint_maxp(d); - clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); - - if (transport_is_cbi()) { - d = fsg_ep_desc(fsg->gadget, - &fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc, - &fsg_ss_intr_in_desc); - if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0) - goto reset; - fsg->intr_in_enabled = 1; - } - - /* Allocate the requests */ - for (i = 0; i < fsg_num_buffers; ++i) { - struct fsg_buffhd *bh = &fsg->buffhds[i]; - - if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0) - goto reset; - if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0) - goto reset; - bh->inreq->buf = bh->outreq->buf = bh->buf; - bh->inreq->context = bh->outreq->context = bh; - bh->inreq->complete = bulk_in_complete; - bh->outreq->complete = bulk_out_complete; - } - if (transport_is_cbi()) { - if ((rc = alloc_request(fsg, fsg->intr_in, &fsg->intreq)) != 0) - goto reset; - fsg->intreq->complete = intr_in_complete; - } - - fsg->running = 1; - for (i = 0; i < fsg->nluns; ++i) - fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED; - return rc; -} - - -/* - * Change our operational configuration. This code must agree with the code - * that returns config descriptors, and with interface altsetting code. - * - * It's also responsible for power management interactions. Some - * configurations might not work with our current power sources. - * For now we just assume the gadget is always self-powered. - */ -static int do_set_config(struct fsg_dev *fsg, u8 new_config) -{ - int rc = 0; - - /* Disable the single interface */ - if (fsg->config != 0) { - DBG(fsg, "reset config\n"); - fsg->config = 0; - rc = do_set_interface(fsg, -1); - } - - /* Enable the interface */ - if (new_config != 0) { - fsg->config = new_config; - if ((rc = do_set_interface(fsg, 0)) != 0) - fsg->config = 0; // Reset on errors - else - INFO(fsg, "%s config #%d\n", - usb_speed_string(fsg->gadget->speed), - fsg->config); - } - return rc; -} - - -/*-------------------------------------------------------------------------*/ - -static void handle_exception(struct fsg_dev *fsg) -{ - siginfo_t info; - int sig; - int i; - int num_active; - struct fsg_buffhd *bh; - enum fsg_state old_state; - u8 new_config; - struct fsg_lun *curlun; - unsigned int exception_req_tag; - int rc; - - /* Clear the existing signals. Anything but SIGUSR1 is converted - * into a high-priority EXIT exception. */ - for (;;) { - sig = dequeue_signal_lock(current, ¤t->blocked, &info); - if (!sig) - break; - if (sig != SIGUSR1) { - if (fsg->state < FSG_STATE_EXIT) - DBG(fsg, "Main thread exiting on signal\n"); - raise_exception(fsg, FSG_STATE_EXIT); - } - } - - /* Cancel all the pending transfers */ - if (fsg->intreq_busy) - usb_ep_dequeue(fsg->intr_in, fsg->intreq); - for (i = 0; i < fsg_num_buffers; ++i) { - bh = &fsg->buffhds[i]; - if (bh->inreq_busy) - usb_ep_dequeue(fsg->bulk_in, bh->inreq); - if (bh->outreq_busy) - usb_ep_dequeue(fsg->bulk_out, bh->outreq); - } - - /* Wait until everything is idle */ - for (;;) { - num_active = fsg->intreq_busy; - for (i = 0; i < fsg_num_buffers; ++i) { - bh = &fsg->buffhds[i]; - num_active += bh->inreq_busy + bh->outreq_busy; - } - if (num_active == 0) - break; - if (sleep_thread(fsg)) - return; - } - - /* Clear out the controller's fifos */ - if (fsg->bulk_in_enabled) - usb_ep_fifo_flush(fsg->bulk_in); - if (fsg->bulk_out_enabled) - usb_ep_fifo_flush(fsg->bulk_out); - if (fsg->intr_in_enabled) - usb_ep_fifo_flush(fsg->intr_in); - - /* Reset the I/O buffer states and pointers, the SCSI - * state, and the exception. Then invoke the handler. */ - spin_lock_irq(&fsg->lock); - - for (i = 0; i < fsg_num_buffers; ++i) { - bh = &fsg->buffhds[i]; - bh->state = BUF_STATE_EMPTY; - } - fsg->next_buffhd_to_fill = fsg->next_buffhd_to_drain = - &fsg->buffhds[0]; - - exception_req_tag = fsg->exception_req_tag; - new_config = fsg->new_config; - old_state = fsg->state; - - if (old_state == FSG_STATE_ABORT_BULK_OUT) - fsg->state = FSG_STATE_STATUS_PHASE; - else { - for (i = 0; i < fsg->nluns; ++i) { - curlun = &fsg->luns[i]; - curlun->prevent_medium_removal = 0; - curlun->sense_data = curlun->unit_attention_data = - SS_NO_SENSE; - curlun->sense_data_info = 0; - curlun->info_valid = 0; - } - fsg->state = FSG_STATE_IDLE; - } - spin_unlock_irq(&fsg->lock); - - /* Carry out any extra actions required for the exception */ - switch (old_state) { - default: - break; - - case FSG_STATE_ABORT_BULK_OUT: - send_status(fsg); - spin_lock_irq(&fsg->lock); - if (fsg->state == FSG_STATE_STATUS_PHASE) - fsg->state = FSG_STATE_IDLE; - spin_unlock_irq(&fsg->lock); - break; - - case FSG_STATE_RESET: - /* In case we were forced against our will to halt a - * bulk endpoint, clear the halt now. (The SuperH UDC - * requires this.) */ - if (test_and_clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) - usb_ep_clear_halt(fsg->bulk_in); - - if (transport_is_bbb()) { - if (fsg->ep0_req_tag == exception_req_tag) - ep0_queue(fsg); // Complete the status stage - - } else if (transport_is_cbi()) - send_status(fsg); // Status by interrupt pipe - - /* Technically this should go here, but it would only be - * a waste of time. Ditto for the INTERFACE_CHANGE and - * CONFIG_CHANGE cases. */ - // for (i = 0; i < fsg->nluns; ++i) - // fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED; - break; - - case FSG_STATE_INTERFACE_CHANGE: - rc = do_set_interface(fsg, 0); - if (fsg->ep0_req_tag != exception_req_tag) - break; - if (rc != 0) // STALL on errors - fsg_set_halt(fsg, fsg->ep0); - else // Complete the status stage - ep0_queue(fsg); - break; - - case FSG_STATE_CONFIG_CHANGE: - rc = do_set_config(fsg, new_config); - if (fsg->ep0_req_tag != exception_req_tag) - break; - if (rc != 0) // STALL on errors - fsg_set_halt(fsg, fsg->ep0); - else // Complete the status stage - ep0_queue(fsg); - break; - - case FSG_STATE_DISCONNECT: - for (i = 0; i < fsg->nluns; ++i) - fsg_lun_fsync_sub(fsg->luns + i); - do_set_config(fsg, 0); // Unconfigured state - break; - - case FSG_STATE_EXIT: - case FSG_STATE_TERMINATED: - do_set_config(fsg, 0); // Free resources - spin_lock_irq(&fsg->lock); - fsg->state = FSG_STATE_TERMINATED; // Stop the thread - spin_unlock_irq(&fsg->lock); - break; - } -} - - -/*-------------------------------------------------------------------------*/ - -static int fsg_main_thread(void *fsg_) -{ - struct fsg_dev *fsg = fsg_; - - /* Allow the thread to be killed by a signal, but set the signal mask - * to block everything but INT, TERM, KILL, and USR1. */ - allow_signal(SIGINT); - allow_signal(SIGTERM); - allow_signal(SIGKILL); - allow_signal(SIGUSR1); - - /* Allow the thread to be frozen */ - set_freezable(); - - /* Arrange for userspace references to be interpreted as kernel - * pointers. That way we can pass a kernel pointer to a routine - * that expects a __user pointer and it will work okay. */ - set_fs(get_ds()); - - /* The main loop */ - while (fsg->state != FSG_STATE_TERMINATED) { - if (exception_in_progress(fsg) || signal_pending(current)) { - handle_exception(fsg); - continue; - } - - if (!fsg->running) { - sleep_thread(fsg); - continue; - } - - if (get_next_command(fsg)) - continue; - - spin_lock_irq(&fsg->lock); - if (!exception_in_progress(fsg)) - fsg->state = FSG_STATE_DATA_PHASE; - spin_unlock_irq(&fsg->lock); - - if (do_scsi_command(fsg) || finish_reply(fsg)) - continue; - - spin_lock_irq(&fsg->lock); - if (!exception_in_progress(fsg)) - fsg->state = FSG_STATE_STATUS_PHASE; - spin_unlock_irq(&fsg->lock); - - if (send_status(fsg)) - continue; - - spin_lock_irq(&fsg->lock); - if (!exception_in_progress(fsg)) - fsg->state = FSG_STATE_IDLE; - spin_unlock_irq(&fsg->lock); - } - - spin_lock_irq(&fsg->lock); - fsg->thread_task = NULL; - spin_unlock_irq(&fsg->lock); - - /* If we are exiting because of a signal, unregister the - * gadget driver. */ - if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) - usb_gadget_unregister_driver(&fsg_driver); - - /* Let the unbind and cleanup routines know the thread has exited */ - complete_and_exit(&fsg->thread_notifier, 0); -} - - -/*-------------------------------------------------------------------------*/ - - -/* The write permissions and store_xxx pointers are set in fsg_bind() */ -static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL); -static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, NULL); -static DEVICE_ATTR(file, 0444, fsg_show_file, NULL); - - -/*-------------------------------------------------------------------------*/ - -static void fsg_release(struct kref *ref) -{ - struct fsg_dev *fsg = container_of(ref, struct fsg_dev, ref); - - kfree(fsg->luns); - kfree(fsg); -} - -static void lun_release(struct device *dev) -{ - struct rw_semaphore *filesem = dev_get_drvdata(dev); - struct fsg_dev *fsg = - container_of(filesem, struct fsg_dev, filesem); - - kref_put(&fsg->ref, fsg_release); -} - -static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) -{ - struct fsg_dev *fsg = get_gadget_data(gadget); - int i; - struct fsg_lun *curlun; - struct usb_request *req = fsg->ep0req; - - DBG(fsg, "unbind\n"); - clear_bit(REGISTERED, &fsg->atomic_bitflags); - - /* If the thread isn't already dead, tell it to exit now */ - if (fsg->state != FSG_STATE_TERMINATED) { - raise_exception(fsg, FSG_STATE_EXIT); - wait_for_completion(&fsg->thread_notifier); - - /* The cleanup routine waits for this completion also */ - complete(&fsg->thread_notifier); - } - - /* Unregister the sysfs attribute files and the LUNs */ - for (i = 0; i < fsg->nluns; ++i) { - curlun = &fsg->luns[i]; - if (curlun->registered) { - device_remove_file(&curlun->dev, &dev_attr_nofua); - device_remove_file(&curlun->dev, &dev_attr_ro); - device_remove_file(&curlun->dev, &dev_attr_file); - fsg_lun_close(curlun); - device_unregister(&curlun->dev); - curlun->registered = 0; - } - } - - /* Free the data buffers */ - for (i = 0; i < fsg_num_buffers; ++i) - kfree(fsg->buffhds[i].buf); - - /* Free the request and buffer for endpoint 0 */ - if (req) { - kfree(req->buf); - usb_ep_free_request(fsg->ep0, req); - } - - set_gadget_data(gadget, NULL); -} - - -static int __init check_parameters(struct fsg_dev *fsg) -{ - int prot; - - /* Store the default values */ - mod_data.transport_type = USB_PR_BULK; - mod_data.transport_name = "Bulk-only"; - mod_data.protocol_type = USB_SC_SCSI; - mod_data.protocol_name = "Transparent SCSI"; - - /* Some peripheral controllers are known not to be able to - * halt bulk endpoints correctly. If one of them is present, - * disable stalls. - */ - if (gadget_is_at91(fsg->gadget)) - mod_data.can_stall = 0; - - if (mod_data.release == 0xffff) - mod_data.release = get_default_bcdDevice(); - - prot = simple_strtol(mod_data.protocol_parm, NULL, 0); - -#ifdef CONFIG_USB_FILE_STORAGE_TEST - if (strnicmp(mod_data.transport_parm, "BBB", 10) == 0) { - ; // Use default setting - } else if (strnicmp(mod_data.transport_parm, "CB", 10) == 0) { - mod_data.transport_type = USB_PR_CB; - mod_data.transport_name = "Control-Bulk"; - } else if (strnicmp(mod_data.transport_parm, "CBI", 10) == 0) { - mod_data.transport_type = USB_PR_CBI; - mod_data.transport_name = "Control-Bulk-Interrupt"; - } else { - ERROR(fsg, "invalid transport: %s\n", mod_data.transport_parm); - return -EINVAL; - } - - if (strnicmp(mod_data.protocol_parm, "SCSI", 10) == 0 || - prot == USB_SC_SCSI) { - ; // Use default setting - } else if (strnicmp(mod_data.protocol_parm, "RBC", 10) == 0 || - prot == USB_SC_RBC) { - mod_data.protocol_type = USB_SC_RBC; - mod_data.protocol_name = "RBC"; - } else if (strnicmp(mod_data.protocol_parm, "8020", 4) == 0 || - strnicmp(mod_data.protocol_parm, "ATAPI", 10) == 0 || - prot == USB_SC_8020) { - mod_data.protocol_type = USB_SC_8020; - mod_data.protocol_name = "8020i (ATAPI)"; - } else if (strnicmp(mod_data.protocol_parm, "QIC", 3) == 0 || - prot == USB_SC_QIC) { - mod_data.protocol_type = USB_SC_QIC; - mod_data.protocol_name = "QIC-157"; - } else if (strnicmp(mod_data.protocol_parm, "UFI", 10) == 0 || - prot == USB_SC_UFI) { - mod_data.protocol_type = USB_SC_UFI; - mod_data.protocol_name = "UFI"; - } else if (strnicmp(mod_data.protocol_parm, "8070", 4) == 0 || - prot == USB_SC_8070) { - mod_data.protocol_type = USB_SC_8070; - mod_data.protocol_name = "8070i"; - } else { - ERROR(fsg, "invalid protocol: %s\n", mod_data.protocol_parm); - return -EINVAL; - } - - mod_data.buflen &= PAGE_CACHE_MASK; - if (mod_data.buflen <= 0) { - ERROR(fsg, "invalid buflen\n"); - return -ETOOSMALL; - } - -#endif /* CONFIG_USB_FILE_STORAGE_TEST */ - - /* Serial string handling. - * On a real device, the serial string would be loaded - * from permanent storage. */ - if (mod_data.serial) { - const char *ch; - unsigned len = 0; - - /* Sanity check : - * The CB[I] specification limits the serial string to - * 12 uppercase hexadecimal characters. - * BBB need at least 12 uppercase hexadecimal characters, - * with a maximum of 126. */ - for (ch = mod_data.serial; *ch; ++ch) { - ++len; - if ((*ch < '0' || *ch > '9') && - (*ch < 'A' || *ch > 'F')) { /* not uppercase hex */ - WARNING(fsg, - "Invalid serial string character: %c\n", - *ch); - goto no_serial; - } - } - if (len > 126 || - (mod_data.transport_type == USB_PR_BULK && len < 12) || - (mod_data.transport_type != USB_PR_BULK && len > 12)) { - WARNING(fsg, "Invalid serial string length!\n"); - goto no_serial; - } - fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial; - } else { - WARNING(fsg, "No serial-number string provided!\n"); - no_serial: - device_desc.iSerialNumber = 0; - } - - return 0; -} - - -static int __init fsg_bind(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) -{ - struct fsg_dev *fsg = the_fsg; - int rc; - int i; - struct fsg_lun *curlun; - struct usb_ep *ep; - struct usb_request *req; - char *pathbuf, *p; - - fsg->gadget = gadget; - set_gadget_data(gadget, fsg); - fsg->ep0 = gadget->ep0; - fsg->ep0->driver_data = fsg; - - if ((rc = check_parameters(fsg)) != 0) - goto out; - - if (mod_data.removable) { // Enable the store_xxx attributes - dev_attr_file.attr.mode = 0644; - dev_attr_file.store = fsg_store_file; - if (!mod_data.cdrom) { - dev_attr_ro.attr.mode = 0644; - dev_attr_ro.store = fsg_store_ro; - } - } - - /* Only for removable media? */ - dev_attr_nofua.attr.mode = 0644; - dev_attr_nofua.store = fsg_store_nofua; - - /* Find out how many LUNs there should be */ - i = mod_data.nluns; - if (i == 0) - i = max(mod_data.num_filenames, 1u); - if (i > FSG_MAX_LUNS) { - ERROR(fsg, "invalid number of LUNs: %d\n", i); - rc = -EINVAL; - goto out; - } - - /* Create the LUNs, open their backing files, and register the - * LUN devices in sysfs. */ - fsg->luns = kzalloc(i * sizeof(struct fsg_lun), GFP_KERNEL); - if (!fsg->luns) { - rc = -ENOMEM; - goto out; - } - fsg->nluns = i; - - for (i = 0; i < fsg->nluns; ++i) { - curlun = &fsg->luns[i]; - curlun->cdrom = !!mod_data.cdrom; - curlun->ro = mod_data.cdrom || mod_data.ro[i]; - curlun->initially_ro = curlun->ro; - curlun->removable = mod_data.removable; - curlun->nofua = mod_data.nofua[i]; - curlun->dev.release = lun_release; - curlun->dev.parent = &gadget->dev; - curlun->dev.driver = &fsg_driver.driver; - dev_set_drvdata(&curlun->dev, &fsg->filesem); - dev_set_name(&curlun->dev,"%s-lun%d", - dev_name(&gadget->dev), i); - - kref_get(&fsg->ref); - rc = device_register(&curlun->dev); - if (rc) { - INFO(fsg, "failed to register LUN%d: %d\n", i, rc); - put_device(&curlun->dev); - goto out; - } - curlun->registered = 1; - - rc = device_create_file(&curlun->dev, &dev_attr_ro); - if (rc) - goto out; - rc = device_create_file(&curlun->dev, &dev_attr_nofua); - if (rc) - goto out; - rc = device_create_file(&curlun->dev, &dev_attr_file); - if (rc) - goto out; - - if (mod_data.file[i] && *mod_data.file[i]) { - rc = fsg_lun_open(curlun, mod_data.file[i]); - if (rc) - goto out; - } else if (!mod_data.removable) { - ERROR(fsg, "no file given for LUN%d\n", i); - rc = -EINVAL; - goto out; - } - } - - /* Find all the endpoints we will use */ - usb_ep_autoconfig_reset(gadget); - ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc); - if (!ep) - goto autoconf_fail; - ep->driver_data = fsg; // claim the endpoint - fsg->bulk_in = ep; - - ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc); - if (!ep) - goto autoconf_fail; - ep->driver_data = fsg; // claim the endpoint - fsg->bulk_out = ep; - - if (transport_is_cbi()) { - ep = usb_ep_autoconfig(gadget, &fsg_fs_intr_in_desc); - if (!ep) - goto autoconf_fail; - ep->driver_data = fsg; // claim the endpoint - fsg->intr_in = ep; - } - - /* Fix up the descriptors */ - device_desc.idVendor = cpu_to_le16(mod_data.vendor); - device_desc.idProduct = cpu_to_le16(mod_data.product); - device_desc.bcdDevice = cpu_to_le16(mod_data.release); - - i = (transport_is_cbi() ? 3 : 2); // Number of endpoints - fsg_intf_desc.bNumEndpoints = i; - fsg_intf_desc.bInterfaceSubClass = mod_data.protocol_type; - fsg_intf_desc.bInterfaceProtocol = mod_data.transport_type; - fsg_fs_function[i + FSG_FS_FUNCTION_PRE_EP_ENTRIES] = NULL; - - if (gadget_is_dualspeed(gadget)) { - fsg_hs_function[i + FSG_HS_FUNCTION_PRE_EP_ENTRIES] = NULL; - - /* Assume endpoint addresses are the same for both speeds */ - fsg_hs_bulk_in_desc.bEndpointAddress = - fsg_fs_bulk_in_desc.bEndpointAddress; - fsg_hs_bulk_out_desc.bEndpointAddress = - fsg_fs_bulk_out_desc.bEndpointAddress; - fsg_hs_intr_in_desc.bEndpointAddress = - fsg_fs_intr_in_desc.bEndpointAddress; - } - - if (gadget_is_superspeed(gadget)) { - unsigned max_burst; - - fsg_ss_function[i + FSG_SS_FUNCTION_PRE_EP_ENTRIES] = NULL; - - /* Calculate bMaxBurst, we know packet size is 1024 */ - max_burst = min_t(unsigned, mod_data.buflen / 1024, 15); - - /* Assume endpoint addresses are the same for both speeds */ - fsg_ss_bulk_in_desc.bEndpointAddress = - fsg_fs_bulk_in_desc.bEndpointAddress; - fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst; - - fsg_ss_bulk_out_desc.bEndpointAddress = - fsg_fs_bulk_out_desc.bEndpointAddress; - fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst; - } - - if (gadget_is_otg(gadget)) - fsg_otg_desc.bmAttributes |= USB_OTG_HNP; - - rc = -ENOMEM; - - /* Allocate the request and buffer for endpoint 0 */ - fsg->ep0req = req = usb_ep_alloc_request(fsg->ep0, GFP_KERNEL); - if (!req) - goto out; - req->buf = kmalloc(EP0_BUFSIZE, GFP_KERNEL); - if (!req->buf) - goto out; - req->complete = ep0_complete; - - /* Allocate the data buffers */ - for (i = 0; i < fsg_num_buffers; ++i) { - struct fsg_buffhd *bh = &fsg->buffhds[i]; - - /* Allocate for the bulk-in endpoint. We assume that - * the buffer will also work with the bulk-out (and - * interrupt-in) endpoint. */ - bh->buf = kmalloc(mod_data.buflen, GFP_KERNEL); - if (!bh->buf) - goto out; - bh->next = bh + 1; - } - fsg->buffhds[fsg_num_buffers - 1].next = &fsg->buffhds[0]; - - /* This should reflect the actual gadget power source */ - usb_gadget_set_selfpowered(gadget); - - snprintf(fsg_string_manufacturer, sizeof fsg_string_manufacturer, - "%s %s with %s", - init_utsname()->sysname, init_utsname()->release, - gadget->name); - - fsg->thread_task = kthread_create(fsg_main_thread, fsg, - "file-storage-gadget"); - if (IS_ERR(fsg->thread_task)) { - rc = PTR_ERR(fsg->thread_task); - goto out; - } - - INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n"); - INFO(fsg, "NOTE: This driver is deprecated. " - "Consider using g_mass_storage instead.\n"); - INFO(fsg, "Number of LUNs=%d\n", fsg->nluns); - - pathbuf = kmalloc(PATH_MAX, GFP_KERNEL); - for (i = 0; i < fsg->nluns; ++i) { - curlun = &fsg->luns[i]; - if (fsg_lun_is_open(curlun)) { - p = NULL; - if (pathbuf) { - p = d_path(&curlun->filp->f_path, - pathbuf, PATH_MAX); - if (IS_ERR(p)) - p = NULL; - } - LINFO(curlun, "ro=%d, nofua=%d, file: %s\n", - curlun->ro, curlun->nofua, (p ? p : "(error)")); - } - } - kfree(pathbuf); - - DBG(fsg, "transport=%s (x%02x)\n", - mod_data.transport_name, mod_data.transport_type); - DBG(fsg, "protocol=%s (x%02x)\n", - mod_data.protocol_name, mod_data.protocol_type); - DBG(fsg, "VendorID=x%04x, ProductID=x%04x, Release=x%04x\n", - mod_data.vendor, mod_data.product, mod_data.release); - DBG(fsg, "removable=%d, stall=%d, cdrom=%d, buflen=%u\n", - mod_data.removable, mod_data.can_stall, - mod_data.cdrom, mod_data.buflen); - DBG(fsg, "I/O thread pid: %d\n", task_pid_nr(fsg->thread_task)); - - set_bit(REGISTERED, &fsg->atomic_bitflags); - - /* Tell the thread to start working */ - wake_up_process(fsg->thread_task); - return 0; - -autoconf_fail: - ERROR(fsg, "unable to autoconfigure all endpoints\n"); - rc = -ENOTSUPP; - -out: - fsg->state = FSG_STATE_TERMINATED; // The thread is dead - fsg_unbind(gadget); - complete(&fsg->thread_notifier); - return rc; -} - - -/*-------------------------------------------------------------------------*/ - -static void fsg_suspend(struct usb_gadget *gadget) -{ - struct fsg_dev *fsg = get_gadget_data(gadget); - - DBG(fsg, "suspend\n"); - set_bit(SUSPENDED, &fsg->atomic_bitflags); -} - -static void fsg_resume(struct usb_gadget *gadget) -{ - struct fsg_dev *fsg = get_gadget_data(gadget); - - DBG(fsg, "resume\n"); - clear_bit(SUSPENDED, &fsg->atomic_bitflags); -} - - -/*-------------------------------------------------------------------------*/ - -static __refdata struct usb_gadget_driver fsg_driver = { - .max_speed = USB_SPEED_SUPER, - .function = (char *) fsg_string_product, - .bind = fsg_bind, - .unbind = fsg_unbind, - .disconnect = fsg_disconnect, - .setup = fsg_setup, - .suspend = fsg_suspend, - .resume = fsg_resume, - - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - // .release = ... - // .suspend = ... - // .resume = ... - }, -}; - - -static int __init fsg_alloc(void) -{ - struct fsg_dev *fsg; - - fsg = kzalloc(sizeof *fsg + - fsg_num_buffers * sizeof *(fsg->buffhds), GFP_KERNEL); - - if (!fsg) - return -ENOMEM; - spin_lock_init(&fsg->lock); - init_rwsem(&fsg->filesem); - kref_init(&fsg->ref); - init_completion(&fsg->thread_notifier); - - the_fsg = fsg; - return 0; -} - - -static int __init fsg_init(void) -{ - int rc; - struct fsg_dev *fsg; - - rc = fsg_num_buffers_validate(); - if (rc != 0) - return rc; - - if ((rc = fsg_alloc()) != 0) - return rc; - fsg = the_fsg; - rc = usb_gadget_probe_driver(&fsg_driver); - if (rc != 0) - kref_put(&fsg->ref, fsg_release); - return rc; -} -module_init(fsg_init); - - -static void __exit fsg_cleanup(void) -{ - struct fsg_dev *fsg = the_fsg; - - /* Unregister the driver iff the thread hasn't already done so */ - if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) - usb_gadget_unregister_driver(&fsg_driver); - - /* Wait for the thread to finish up */ - wait_for_completion(&fsg->thread_notifier); - - kref_put(&fsg->ref, fsg_release); -} -module_exit(fsg_cleanup); diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c index 1b0f086426b..d3bd7b095ba 100644 --- a/drivers/usb/gadget/fsl_mxc_udc.c +++ b/drivers/usb/gadget/fsl_mxc_udc.c @@ -18,14 +18,13 @@ #include <linux/platform_device.h> #include <linux/io.h> -#include <mach/hardware.h> - static struct clk *mxc_ahb_clk; static struct clk *mxc_per_clk; static struct clk *mxc_ipg_clk; /* workaround ENGcm09152 for i.MX35 */ -#define USBPHYCTRL_OTGBASE_OFFSET 0x608 +#define MX35_USBPHYCTRL_OFFSET 0x600 +#define USBPHYCTRL_OTGBASE_OFFSET 0x8 #define USBPHYCTRL_EVDO (1 << 23) int fsl_udc_clk_init(struct platform_device *pdev) @@ -59,7 +58,7 @@ int fsl_udc_clk_init(struct platform_device *pdev) clk_prepare_enable(mxc_per_clk); /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */ - if (!cpu_is_mx51()) { + if (!strcmp(pdev->id_entry->name, "imx-udc-mx27")) { freq = clk_get_rate(mxc_per_clk); if (pdata->phy_mode != FSL_USB2_PHY_ULPI && (freq < 59999000 || freq > 60001000)) { @@ -79,27 +78,40 @@ eclkrate: return ret; } -void fsl_udc_clk_finalize(struct platform_device *pdev) +int fsl_udc_clk_finalize(struct platform_device *pdev) { struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; - if (cpu_is_mx35()) { - unsigned int v; + int ret = 0; - /* workaround ENGcm09152 for i.MX35 */ - if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) { - v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); - writel(v | USBPHYCTRL_EVDO, - MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); + /* workaround ENGcm09152 for i.MX35 */ + if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) { + unsigned int v; + struct resource *res = platform_get_resource + (pdev, IORESOURCE_MEM, 0); + void __iomem *phy_regs = ioremap(res->start + + MX35_USBPHYCTRL_OFFSET, 512); + if (!phy_regs) { + dev_err(&pdev->dev, "ioremap for phy address fails\n"); + ret = -EINVAL; + goto ioremap_err; } + + v = readl(phy_regs + USBPHYCTRL_OTGBASE_OFFSET); + writel(v | USBPHYCTRL_EVDO, + phy_regs + USBPHYCTRL_OTGBASE_OFFSET); + + iounmap(phy_regs); } + +ioremap_err: /* ULPI transceivers don't need usbpll */ if (pdata->phy_mode == FSL_USB2_PHY_ULPI) { clk_disable_unprepare(mxc_per_clk); mxc_per_clk = NULL; } + + return ret; } void fsl_udc_clk_release(void) diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index b09452d6f33..034477ce77c 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -1894,7 +1894,7 @@ static int fsl_qe_stop(struct usb_gadget *gadget, struct usb_gadget_driver *driver); /* defined in usb_gadget.h */ -static struct usb_gadget_ops qe_gadget_ops = { +static const struct usb_gadget_ops qe_gadget_ops = { .get_frame = qe_get_frame, .udc_start = fsl_qe_start, .udc_stop = fsl_qe_stop, @@ -2347,7 +2347,7 @@ static int fsl_qe_stop(struct usb_gadget *gadget, } /* udc structure's alloc and setup, include ep-param alloc */ -static struct qe_udc __devinit *qe_udc_config(struct platform_device *ofdev) +static struct qe_udc *qe_udc_config(struct platform_device *ofdev) { struct qe_udc *udc; struct device_node *np = ofdev->dev.of_node; @@ -2402,7 +2402,7 @@ cleanup: } /* USB Controller register init */ -static int __devinit qe_udc_reg_init(struct qe_udc *udc) +static int qe_udc_reg_init(struct qe_udc *udc) { struct usb_ctlr __iomem *qe_usbregs; qe_usbregs = udc->usb_regs; @@ -2420,7 +2420,7 @@ static int __devinit qe_udc_reg_init(struct qe_udc *udc) return 0; } -static int __devinit qe_ep_config(struct qe_udc *udc, unsigned char pipe_num) +static int qe_ep_config(struct qe_udc *udc, unsigned char pipe_num) { struct qe_ep *ep = &udc->eps[pipe_num]; @@ -2473,7 +2473,7 @@ static void qe_udc_release(struct device *dev) /* Driver probe functions */ static const struct of_device_id qe_udc_match[]; -static int __devinit qe_udc_probe(struct platform_device *ofdev) +static int qe_udc_probe(struct platform_device *ofdev) { struct qe_udc *udc; const struct of_device_id *match; @@ -2651,7 +2651,7 @@ static int qe_udc_resume(struct platform_device *dev) } #endif -static int __devexit qe_udc_remove(struct platform_device *ofdev) +static int qe_udc_remove(struct platform_device *ofdev) { struct qe_udc *udc = dev_get_drvdata(&ofdev->dev); struct qe_ep *ep; @@ -2710,7 +2710,7 @@ static int __devexit qe_udc_remove(struct platform_device *ofdev) } /*-------------------------------------------------------------------------*/ -static const struct of_device_id qe_udc_match[] __devinitconst = { +static const struct of_device_id qe_udc_match[] = { { .compatible = "fsl,mpc8323-qe-usb", .data = (void *)PORT_QE, @@ -2735,7 +2735,7 @@ static struct platform_driver udc_driver = { .of_match_table = qe_udc_match, }, .probe = qe_udc_probe, - .remove = __devexit_p(qe_udc_remove), + .remove = qe_udc_remove, #ifdef CONFIG_PM .suspend = qe_udc_suspend, .resume = qe_udc_resume, diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 6ae70cba0c4..04d5fef1440 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -41,6 +41,7 @@ #include <linux/fsl_devices.h> #include <linux/dmapool.h> #include <linux/delay.h> +#include <linux/of_device.h> #include <asm/byteorder.h> #include <asm/io.h> @@ -1254,19 +1255,20 @@ static int fsl_pullup(struct usb_gadget *gadget, int is_on) return 0; } -static int fsl_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); -static int fsl_stop(struct usb_gadget_driver *driver); +static int fsl_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver); +static int fsl_udc_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver); /* defined in gadget.h */ -static struct usb_gadget_ops fsl_gadget_ops = { +static const struct usb_gadget_ops fsl_gadget_ops = { .get_frame = fsl_get_frame, .wakeup = fsl_wakeup, /* .set_selfpowered = fsl_set_selfpowered, */ /* Always selfpowered */ .vbus_session = fsl_vbus_session, .vbus_draw = fsl_vbus_draw, .pullup = fsl_pullup, - .start = fsl_start, - .stop = fsl_stop, + .udc_start = fsl_udc_start, + .udc_stop = fsl_udc_stop, }; /* Set protocol stall on ep0, protocol stall will automatically be cleared @@ -1950,22 +1952,12 @@ static irqreturn_t fsl_udc_irq(int irq, void *_udc) * Hook to gadget drivers * Called by initialization code of gadget drivers *----------------------------------------------------------------*/ -static int fsl_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) +static int fsl_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) { - int retval = -ENODEV; + int retval = 0; unsigned long flags = 0; - if (!udc_controller) - return -ENODEV; - - if (!driver || driver->max_speed < USB_SPEED_FULL - || !bind || !driver->disconnect || !driver->setup) - return -EINVAL; - - if (udc_controller->driver) - return -EBUSY; - /* lock is needed but whether should use this lock or another */ spin_lock_irqsave(&udc_controller->lock, flags); @@ -1975,15 +1967,6 @@ static int fsl_start(struct usb_gadget_driver *driver, udc_controller->gadget.dev.driver = &driver->driver; spin_unlock_irqrestore(&udc_controller->lock, flags); - /* bind udc driver to gadget driver */ - retval = bind(&udc_controller->gadget, driver); - if (retval) { - VDBG("bind to %s --> %d", driver->driver.name, retval); - udc_controller->gadget.dev.driver = NULL; - udc_controller->driver = NULL; - goto out; - } - if (!IS_ERR_OR_NULL(udc_controller->transceiver)) { /* Suspend the controller until OTG enable it */ udc_controller->stopped = 1; @@ -2009,28 +1992,17 @@ static int fsl_start(struct usb_gadget_driver *driver, udc_controller->ep0_state = WAIT_FOR_SETUP; udc_controller->ep0_dir = 0; } - printk(KERN_INFO "%s: bind to driver %s\n", - udc_controller->gadget.name, driver->driver.name); -out: - if (retval) - printk(KERN_WARNING "gadget driver register failed %d\n", - retval); return retval; } /* Disconnect from gadget driver */ -static int fsl_stop(struct usb_gadget_driver *driver) +static int fsl_udc_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver) { struct fsl_ep *loop_ep; unsigned long flags; - if (!udc_controller) - return -ENODEV; - - if (!driver || driver != udc_controller->driver || !driver->unbind) - return -EINVAL; - if (!IS_ERR_OR_NULL(udc_controller->transceiver)) otg_set_peripheral(udc_controller->transceiver->otg, NULL); @@ -2051,16 +2023,9 @@ static int fsl_stop(struct usb_gadget_driver *driver) nuke(loop_ep, -ESHUTDOWN); spin_unlock_irqrestore(&udc_controller->lock, flags); - /* report disconnect; the controller is already quiesced */ - driver->disconnect(&udc_controller->gadget); - - /* unbind gadget and unhook driver. */ - driver->unbind(&udc_controller->gadget); udc_controller->gadget.dev.driver = NULL; udc_controller->driver = NULL; - printk(KERN_WARNING "unregistered gadget driver '%s'\n", - driver->driver.name); return 0; } @@ -2126,7 +2091,7 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count, tmp_reg = fsl_readl(&dr_regs->usbintr); t = scnprintf(next, size, - "USB Intrrupt Enable Reg:\n" + "USB Interrupt Enable Reg:\n" "Sleep Enable: %d SOF Received Enable: %d " "Reset Enable: %d\n" "System Error Enable: %d " @@ -2438,11 +2403,6 @@ static int __init fsl_udc_probe(struct platform_device *pdev) unsigned int i; u32 dccparams; - if (strcmp(pdev->name, driver_name)) { - VDBG("Wrong device"); - return -ENODEV; - } - udc_controller = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL); if (udc_controller == NULL) { ERR("malloc udc failed\n"); @@ -2547,7 +2507,9 @@ static int __init fsl_udc_probe(struct platform_device *pdev) dr_controller_setup(udc_controller); } - fsl_udc_clk_finalize(pdev); + ret = fsl_udc_clk_finalize(pdev); + if (ret) + goto err_free_irq; /* Setup gadget structure */ udc_controller->gadget.ops = &fsl_gadget_ops; @@ -2756,22 +2718,32 @@ static int fsl_udc_otg_resume(struct device *dev) return fsl_udc_resume(NULL); } - /*------------------------------------------------------------------------- Register entry point for the peripheral controller driver --------------------------------------------------------------------------*/ - +static const struct platform_device_id fsl_udc_devtype[] = { + { + .name = "imx-udc-mx27", + }, { + .name = "imx-udc-mx51", + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, fsl_udc_devtype); static struct platform_driver udc_driver = { - .remove = __exit_p(fsl_udc_remove), + .remove = __exit_p(fsl_udc_remove), + /* Just for FSL i.mx SoC currently */ + .id_table = fsl_udc_devtype, /* these suspend and resume are not usb suspend and resume */ - .suspend = fsl_udc_suspend, - .resume = fsl_udc_resume, - .driver = { - .name = (char *)driver_name, - .owner = THIS_MODULE, - /* udc suspend/resume called from OTG driver */ - .suspend = fsl_udc_otg_suspend, - .resume = fsl_udc_otg_resume, + .suspend = fsl_udc_suspend, + .resume = fsl_udc_resume, + .driver = { + .name = (char *)driver_name, + .owner = THIS_MODULE, + /* udc suspend/resume called from OTG driver */ + .suspend = fsl_udc_otg_suspend, + .resume = fsl_udc_otg_resume, }, }; diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h index f61a967f708..c6703bb07b2 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.h +++ b/drivers/usb/gadget/fsl_usb2_udc.h @@ -592,15 +592,16 @@ static inline struct ep_queue_head *get_qh_by_ep(struct fsl_ep *ep) struct platform_device; #ifdef CONFIG_ARCH_MXC int fsl_udc_clk_init(struct platform_device *pdev); -void fsl_udc_clk_finalize(struct platform_device *pdev); +int fsl_udc_clk_finalize(struct platform_device *pdev); void fsl_udc_clk_release(void); #else static inline int fsl_udc_clk_init(struct platform_device *pdev) { return 0; } -static inline void fsl_udc_clk_finalize(struct platform_device *pdev) +static inline int fsl_udc_clk_finalize(struct platform_device *pdev) { + return 0; } static inline void fsl_udc_clk_release(void) { diff --git a/drivers/usb/gadget/functions.c b/drivers/usb/gadget/functions.c new file mode 100644 index 00000000000..b13f839e736 --- /dev/null +++ b/drivers/usb/gadget/functions.c @@ -0,0 +1,116 @@ +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/err.h> + +#include <linux/usb/composite.h> + +static LIST_HEAD(func_list); +static DEFINE_MUTEX(func_lock); + +static struct usb_function_instance *try_get_usb_function_instance(const char *name) +{ + struct usb_function_driver *fd; + struct usb_function_instance *fi; + + fi = ERR_PTR(-ENOENT); + mutex_lock(&func_lock); + list_for_each_entry(fd, &func_list, list) { + + if (strcmp(name, fd->name)) + continue; + + if (!try_module_get(fd->mod)) { + fi = ERR_PTR(-EBUSY); + break; + } + fi = fd->alloc_inst(); + if (IS_ERR(fi)) + module_put(fd->mod); + else + fi->fd = fd; + break; + } + mutex_unlock(&func_lock); + return fi; +} + +struct usb_function_instance *usb_get_function_instance(const char *name) +{ + struct usb_function_instance *fi; + int ret; + + fi = try_get_usb_function_instance(name); + if (!IS_ERR(fi)) + return fi; + ret = PTR_ERR(fi); + if (ret != -ENOENT) + return fi; + ret = request_module("usbfunc:%s", name); + if (ret < 0) + return ERR_PTR(ret); + return try_get_usb_function_instance(name); +} +EXPORT_SYMBOL_GPL(usb_get_function_instance); + +struct usb_function *usb_get_function(struct usb_function_instance *fi) +{ + struct usb_function *f; + + f = fi->fd->alloc_func(fi); + if (IS_ERR(f)) + return f; + f->fi = fi; + return f; +} +EXPORT_SYMBOL_GPL(usb_get_function); + +void usb_put_function_instance(struct usb_function_instance *fi) +{ + struct module *mod; + + if (!fi) + return; + + mod = fi->fd->mod; + fi->free_func_inst(fi); + module_put(mod); +} +EXPORT_SYMBOL_GPL(usb_put_function_instance); + +void usb_put_function(struct usb_function *f) +{ + if (!f) + return; + + f->free_func(f); +} +EXPORT_SYMBOL_GPL(usb_put_function); + +int usb_function_register(struct usb_function_driver *newf) +{ + struct usb_function_driver *fd; + int ret; + + ret = -EEXIST; + + mutex_lock(&func_lock); + list_for_each_entry(fd, &func_list, list) { + if (!strcmp(fd->name, newf->name)) + goto out; + } + ret = 0; + list_add_tail(&newf->list, &func_list); +out: + mutex_unlock(&func_lock); + return ret; +} +EXPORT_SYMBOL_GPL(usb_function_register); + +void usb_function_unregister(struct usb_function_driver *fd) +{ + mutex_lock(&func_lock); + list_del(&fd->list); + mutex_unlock(&func_lock); +} +EXPORT_SYMBOL_GPL(usb_function_unregister); diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c index 72cd5e6719d..066cb89376d 100644 --- a/drivers/usb/gadget/fusb300_udc.c +++ b/drivers/usb/gadget/fusb300_udc.c @@ -1308,65 +1308,28 @@ static void init_controller(struct fusb300 *fusb300) iowrite32(0xcfffff9f, fusb300->reg + FUSB300_OFFSET_IGER1); } /*------------------------------------------------------------------------*/ -static struct fusb300 *the_controller; - -static int fusb300_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) +static int fusb300_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) { - struct fusb300 *fusb300 = the_controller; - int retval; - - if (!driver - || driver->max_speed < USB_SPEED_FULL - || !bind - || !driver->setup) - return -EINVAL; - - if (!fusb300) - return -ENODEV; - - if (fusb300->driver) - return -EBUSY; + struct fusb300 *fusb300 = to_fusb300(g); /* hook up the driver */ driver->driver.bus = NULL; fusb300->driver = driver; fusb300->gadget.dev.driver = &driver->driver; - retval = device_add(&fusb300->gadget.dev); - if (retval) { - pr_err("device_add error (%d)\n", retval); - goto error; - } - - retval = bind(&fusb300->gadget, driver); - if (retval) { - pr_err("bind to driver error (%d)\n", retval); - device_del(&fusb300->gadget.dev); - goto error; - } - return 0; - -error: - fusb300->driver = NULL; - fusb300->gadget.dev.driver = NULL; - - return retval; } -static int fusb300_udc_stop(struct usb_gadget_driver *driver) +static int fusb300_udc_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver) { - struct fusb300 *fusb300 = the_controller; - - if (driver != fusb300->driver || !driver->unbind) - return -EINVAL; + struct fusb300 *fusb300 = to_fusb300(g); driver->unbind(&fusb300->gadget); fusb300->gadget.dev.driver = NULL; init_controller(fusb300); - device_del(&fusb300->gadget.dev); fusb300->driver = NULL; return 0; @@ -1378,10 +1341,10 @@ static int fusb300_udc_pullup(struct usb_gadget *_gadget, int is_active) return 0; } -static struct usb_gadget_ops fusb300_gadget_ops = { +static const struct usb_gadget_ops fusb300_gadget_ops = { .pullup = fusb300_udc_pullup, - .start = fusb300_udc_start, - .stop = fusb300_udc_stop, + .udc_start = fusb300_udc_start, + .udc_stop = fusb300_udc_stop, }; static int __exit fusb300_remove(struct platform_device *pdev) @@ -1505,8 +1468,6 @@ static int __init fusb300_probe(struct platform_device *pdev) fusb300->gadget.ep0 = &fusb300->ep[0]->ep; INIT_LIST_HEAD(&fusb300->gadget.ep0->ep_list); - the_controller = fusb300; - fusb300->ep0_req = fusb300_alloc_request(&fusb300->ep[0]->ep, GFP_KERNEL); if (fusb300->ep0_req == NULL) @@ -1517,9 +1478,19 @@ static int __init fusb300_probe(struct platform_device *pdev) if (ret) goto err_add_udc; + ret = device_add(&fusb300->gadget.dev); + if (ret) { + pr_err("device_add error (%d)\n", ret); + goto err_add_device; + } + dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION); return 0; + +err_add_device: + usb_del_gadget_udc(&fusb300->gadget); + err_add_udc: fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req); @@ -1547,15 +1518,4 @@ static struct platform_driver fusb300_driver = { }, }; -static int __init fusb300_udc_init(void) -{ - return platform_driver_probe(&fusb300_driver, fusb300_probe); -} - -module_init(fusb300_udc_init); - -static void __exit fusb300_udc_cleanup(void) -{ - platform_driver_unregister(&fusb300_driver); -} -module_exit(fusb300_udc_cleanup); +module_platform_driver_probe(fusb300_driver, fusb300_probe); diff --git a/drivers/usb/gadget/fusb300_udc.h b/drivers/usb/gadget/fusb300_udc.h index 542cd83cc80..6ba444ae8dd 100644 --- a/drivers/usb/gadget/fusb300_udc.h +++ b/drivers/usb/gadget/fusb300_udc.h @@ -673,4 +673,6 @@ struct fusb300 { u8 reenum; /* if re-enumeration */ }; +#define to_fusb300(g) (container_of((g), struct fusb300, gadget)) + #endif diff --git a/drivers/usb/gadget/g_zero.h b/drivers/usb/gadget/g_zero.h index 71ca193358b..ef3e8515272 100644 --- a/drivers/usb/gadget/g_zero.h +++ b/drivers/usb/gadget/g_zero.h @@ -6,11 +6,34 @@ #ifndef __G_ZERO_H #define __G_ZERO_H -#include <linux/usb/composite.h> +struct usb_zero_options { + unsigned pattern; + unsigned isoc_interval; + unsigned isoc_maxpacket; + unsigned isoc_mult; + unsigned isoc_maxburst; + unsigned bulk_buflen; + unsigned qlen; +}; -/* global state */ -extern unsigned buflen; -extern const struct usb_descriptor_header *otg_desc[]; +struct f_ss_opts { + struct usb_function_instance func_inst; + unsigned pattern; + unsigned isoc_interval; + unsigned isoc_maxpacket; + unsigned isoc_mult; + unsigned isoc_maxburst; + unsigned bulk_buflen; +}; + +struct f_lb_opts { + struct usb_function_instance func_inst; + unsigned bulk_buflen; + unsigned qlen; +}; + +void lb_modexit(void); +int lb_modinit(void); /* common utilities */ struct usb_request *alloc_ep_req(struct usb_ep *ep, int len); @@ -19,8 +42,4 @@ void disable_endpoints(struct usb_composite_dev *cdev, struct usb_ep *in, struct usb_ep *out, struct usb_ep *iso_in, struct usb_ep *iso_out); -/* configuration-specific linkup */ -int sourcesink_add(struct usb_composite_dev *cdev, bool autoresume); -int loopback_add(struct usb_composite_dev *cdev, bool autoresume); - #endif /* __G_ZERO_H */ diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c index 881aab86ae9..e879e2c9f46 100644 --- a/drivers/usb/gadget/gmidi.c +++ b/drivers/usb/gadget/gmidi.c @@ -125,7 +125,7 @@ static struct usb_configuration midi_config = { .bConfigurationValue = 1, /* .iConfiguration = DYNAMIC */ .bmAttributes = USB_CONFIG_ATT_ONE, - .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2, + .MaxPower = CONFIG_USB_GADGET_VBUS_DRAW, }; static int __init midi_bind_config(struct usb_configuration *c) diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index 51037cb7860..85742d4c67d 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -993,14 +993,15 @@ static int goku_get_frame(struct usb_gadget *_gadget) return -EOPNOTSUPP; } -static int goku_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); -static int goku_stop(struct usb_gadget_driver *driver); +static int goku_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver); +static int goku_udc_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver); static const struct usb_gadget_ops goku_ops = { .get_frame = goku_get_frame, - .start = goku_start, - .stop = goku_stop, + .udc_start = goku_udc_start, + .udc_stop = goku_udc_stop, // no remote wakeup // not selfpowered }; @@ -1339,50 +1340,28 @@ static void udc_enable(struct goku_udc *dev) * - one function driver, initted second */ -static struct goku_udc *the_controller; - /* when a driver is successfully registered, it will receive * control requests including set_configuration(), which enables * non-control requests. then usb traffic follows until a * disconnect is reported. then a host may connect again, or * the driver might get unbound. */ -static int goku_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) +static int goku_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) { - struct goku_udc *dev = the_controller; - int retval; - - if (!driver - || driver->max_speed < USB_SPEED_FULL - || !bind - || !driver->disconnect - || !driver->setup) - return -EINVAL; - if (!dev) - return -ENODEV; - if (dev->driver) - return -EBUSY; + struct goku_udc *dev = to_goku_udc(g); /* hook up the driver */ driver->driver.bus = NULL; dev->driver = driver; dev->gadget.dev.driver = &driver->driver; - retval = bind(&dev->gadget, driver); - if (retval) { - DBG(dev, "bind to driver %s --> error %d\n", - driver->driver.name, retval); - dev->driver = NULL; - dev->gadget.dev.driver = NULL; - return retval; - } - /* then enable host detection and ep0; and we're ready + /* + * then enable host detection and ep0; and we're ready * for set_configuration as well as eventual disconnect. */ udc_enable(dev); - DBG(dev, "registered gadget driver '%s'\n", driver->driver.name); return 0; } @@ -1400,35 +1379,23 @@ stop_activity(struct goku_udc *dev, struct usb_gadget_driver *driver) udc_reset (dev); for (i = 0; i < 4; i++) nuke(&dev->ep [i], -ESHUTDOWN); - if (driver) { - spin_unlock(&dev->lock); - driver->disconnect(&dev->gadget); - spin_lock(&dev->lock); - } if (dev->driver) udc_enable(dev); } -static int goku_stop(struct usb_gadget_driver *driver) +static int goku_udc_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver) { - struct goku_udc *dev = the_controller; + struct goku_udc *dev = to_goku_udc(g); unsigned long flags; - if (!dev) - return -ENODEV; - if (!driver || driver != dev->driver || !driver->unbind) - return -EINVAL; - spin_lock_irqsave(&dev->lock, flags); dev->driver = NULL; stop_activity(dev, driver); spin_unlock_irqrestore(&dev->lock, flags); - - driver->unbind(&dev->gadget); dev->gadget.dev.driver = NULL; - DBG(dev, "unregistered driver '%s'\n", driver->driver.name); return 0; } @@ -1754,7 +1721,6 @@ static void goku_remove(struct pci_dev *pdev) pci_set_drvdata(pdev, NULL); dev->regs = NULL; - the_controller = NULL; INFO(dev, "unbind\n"); } @@ -1770,13 +1736,6 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id) void __iomem *base = NULL; int retval; - /* if you want to support more than one controller in a system, - * usb_gadget_driver_{register,unregister}() must change. - */ - if (the_controller) { - pr_warning("ignoring %s\n", pci_name(pdev)); - return -EBUSY; - } if (!pdev->irq) { printk(KERN_ERR "Check PCI %s IRQ setup!\n", pci_name(pdev)); retval = -ENODEV; @@ -1851,7 +1810,6 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id) create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev); #endif - the_controller = dev; retval = device_register(&dev->gadget.dev); if (retval) { put_device(&dev->gadget.dev); diff --git a/drivers/usb/gadget/goku_udc.h b/drivers/usb/gadget/goku_udc.h index 85cdce0d190..b4470d2b1d8 100644 --- a/drivers/usb/gadget/goku_udc.h +++ b/drivers/usb/gadget/goku_udc.h @@ -261,6 +261,7 @@ struct goku_udc { /* statistics... */ unsigned long irqs; }; +#define to_goku_udc(g) (container_of((g), struct goku_udc, gadget)) /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c index 74130f6c12c..c36260ea8bf 100644 --- a/drivers/usb/gadget/hid.c +++ b/drivers/usb/gadget/hid.c @@ -203,7 +203,7 @@ static int __init hidg_plat_driver_probe(struct platform_device *pdev) return 0; } -static int __devexit hidg_plat_driver_remove(struct platform_device *pdev) +static int hidg_plat_driver_remove(struct platform_device *pdev) { struct hidg_func_node *e, *n; @@ -229,7 +229,7 @@ static __refdata struct usb_composite_driver hidg_driver = { }; static struct platform_driver hidg_plat_driver = { - .remove = __devexit_p(hidg_plat_driver_remove), + .remove = hidg_plat_driver_remove, .driver = { .owner = THIS_MODULE, .name = "hidg", diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index a0eb85794fd..5bd930d779b 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -1334,27 +1334,18 @@ static int imx_udc_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { struct imx_udc_struct *imx_usb; - int retval; imx_usb = container_of(gadget, struct imx_udc_struct, gadget); /* first hook up the driver ... */ imx_usb->driver = driver; imx_usb->gadget.dev.driver = &driver->driver; - retval = device_add(&imx_usb->gadget.dev); - if (retval) - goto fail; - D_INI(imx_usb->dev, "<%s> registered gadget driver '%s'\n", __func__, driver->driver.name); imx_udc_enable(imx_usb); return 0; -fail: - imx_usb->driver = NULL; - imx_usb->gadget.dev.driver = NULL; - return retval; } static int imx_udc_stop(struct usb_gadget *gadget, @@ -1370,8 +1361,6 @@ static int imx_udc_stop(struct usb_gadget *gadget, imx_usb->gadget.dev.driver = NULL; imx_usb->driver = NULL; - device_del(&imx_usb->gadget.dev); - D_INI(imx_usb->dev, "<%s> unregistered gadget driver '%s'\n", __func__, driver->driver.name); @@ -1477,6 +1466,10 @@ static int __init imx_udc_probe(struct platform_device *pdev) imx_usb->gadget.dev.parent = &pdev->dev; imx_usb->gadget.dev.dma_mask = pdev->dev.dma_mask; + ret = device_add(&imx_usb->gadget.dev); + if (retval) + goto fail4; + platform_set_drvdata(pdev, imx_usb); usb_init_data(imx_usb); @@ -1488,9 +1481,11 @@ static int __init imx_udc_probe(struct platform_device *pdev) ret = usb_add_gadget_udc(&pdev->dev, &imx_usb->gadget); if (ret) - goto fail4; + goto fail5; return 0; +fail5: + device_unregister(&imx_usb->gadget.dev); fail4: for (i = 0; i < IMX_USB_NB_EP + 1; i++) free_irq(imx_usb->usbd_int[i], imx_usb); @@ -1514,6 +1509,7 @@ static int __exit imx_udc_remove(struct platform_device *pdev) int i; usb_del_gadget_udc(&imx_usb->gadget); + device_unregister(&imx_usb->gadget.dev); imx_udc_disable(imx_usb); del_timer(&imx_usb->timer); @@ -1556,17 +1552,7 @@ static struct platform_driver udc_driver = { .resume = imx_udc_resume, }; -static int __init udc_init(void) -{ - return platform_driver_probe(&udc_driver, imx_udc_probe); -} -module_init(udc_init); - -static void __exit udc_exit(void) -{ - platform_driver_unregister(&udc_driver); -} -module_exit(udc_exit); +module_platform_driver_probe(udc_driver, imx_udc_probe); MODULE_DESCRIPTION("IMX USB Device Controller driver"); MODULE_AUTHOR("Darius Augulis <augulis.darius@gmail.com>"); diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index 76494cabf4e..e2b2e9cf254 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -76,7 +76,6 @@ MODULE_LICENSE ("GPL"); /*----------------------------------------------------------------------*/ #define GADGETFS_MAGIC 0xaee71ee7 -#define DMA_ADDR_INVALID (~(dma_addr_t)0) /* /dev/gadget/$CHIP represents ep0 and the whole device */ enum ep0_state { @@ -918,7 +917,6 @@ static void clean_req (struct usb_ep *ep, struct usb_request *req) if (req->buf != dev->rbuf) { kfree(req->buf); req->buf = dev->rbuf; - req->dma = DMA_ADDR_INVALID; } req->complete = epio_complete; dev->setup_out_ready = 0; @@ -1408,7 +1406,6 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) dev->setup_abort = 1; req->buf = dev->rbuf; - req->dma = DMA_ADDR_INVALID; req->context = NULL; value = -EOPNOTSUPP; switch (ctrl->bRequest) { @@ -2108,6 +2105,7 @@ static struct file_system_type gadgetfs_type = { .mount = gadgetfs_mount, .kill_sb = gadgetfs_kill_sb, }; +MODULE_ALIAS_FS("gadgetfs"); /*----------------------------------------------------------------------*/ diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c index 21a9861dabf..aa04089d689 100644 --- a/drivers/usb/gadget/lpc32xx_udc.c +++ b/drivers/usb/gadget/lpc32xx_udc.c @@ -2399,7 +2399,7 @@ static void udc_handle_ep0_setup(struct lpc32xx_udc *udc) if (i < 0) { /* setup processing failed, force stall */ - dev_err(udc->dev, + dev_dbg(udc->dev, "req %02x.%02x protocol STALL; stat %d\n", reqtype, req, i); udc->ep0state = WAIT_FOR_SETUP; @@ -3352,7 +3352,7 @@ phy_fail: return retval; } -static int __devexit lpc32xx_udc_remove(struct platform_device *pdev) +static int lpc32xx_udc_remove(struct platform_device *pdev) { struct lpc32xx_udc *udc = platform_get_drvdata(pdev); @@ -3447,7 +3447,7 @@ MODULE_DEVICE_TABLE(of, lpc32xx_udc_of_match); #endif static struct platform_driver lpc32xx_udc_driver = { - .remove = __devexit_p(lpc32xx_udc_remove), + .remove = lpc32xx_udc_remove, .shutdown = lpc32xx_udc_shutdown, .suspend = lpc32xx_udc_suspend, .resume = lpc32xx_udc_resume, @@ -3458,17 +3458,7 @@ static struct platform_driver lpc32xx_udc_driver = { }, }; -static int __init udc_init_module(void) -{ - return platform_driver_probe(&lpc32xx_udc_driver, lpc32xx_udc_probe); -} -module_init(udc_init_module); - -static void __exit udc_exit_module(void) -{ - platform_driver_unregister(&lpc32xx_udc_driver); -} -module_exit(udc_exit_module); +module_platform_driver_probe(lpc32xx_udc_driver, lpc32xx_udc_probe); MODULE_DESCRIPTION("LPC32XX udc driver"); MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>"); diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index b6401f1b56c..c1b8c2dd808 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -1463,42 +1463,16 @@ static struct usb_ep_ops m66592_ep_ops = { }; /*-------------------------------------------------------------------------*/ -static struct m66592 *the_controller; - -static int m66592_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) +static int m66592_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) { - struct m66592 *m66592 = the_controller; - int retval; - - if (!driver - || driver->max_speed < USB_SPEED_HIGH - || !bind - || !driver->setup) - return -EINVAL; - if (!m66592) - return -ENODEV; - if (m66592->driver) - return -EBUSY; + struct m66592 *m66592 = to_m66592(g); /* hook up the driver */ driver->driver.bus = NULL; m66592->driver = driver; m66592->gadget.dev.driver = &driver->driver; - retval = device_add(&m66592->gadget.dev); - if (retval) { - pr_err("device_add error (%d)\n", retval); - goto error; - } - - retval = bind(&m66592->gadget, driver); - if (retval) { - pr_err("bind to driver error (%d)\n", retval); - device_del(&m66592->gadget.dev); - goto error; - } - m66592_bset(m66592, M66592_VBSE | M66592_URST, M66592_INTENB0); if (m66592_read(m66592, M66592_INTSTS0) & M66592_VBSTS) { m66592_start_xclock(m66592); @@ -1510,26 +1484,12 @@ static int m66592_start(struct usb_gadget_driver *driver, } return 0; - -error: - m66592->driver = NULL; - m66592->gadget.dev.driver = NULL; - - return retval; } -static int m66592_stop(struct usb_gadget_driver *driver) +static int m66592_udc_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver) { - struct m66592 *m66592 = the_controller; - unsigned long flags; - - if (driver != m66592->driver || !driver->unbind) - return -EINVAL; - - spin_lock_irqsave(&m66592->lock, flags); - if (m66592->gadget.speed != USB_SPEED_UNKNOWN) - m66592_usb_disconnect(m66592); - spin_unlock_irqrestore(&m66592->lock, flags); + struct m66592 *m66592 = to_m66592(g); m66592_bclr(m66592, M66592_VBSE | M66592_URST, M66592_INTENB0); @@ -1539,8 +1499,8 @@ static int m66592_stop(struct usb_gadget_driver *driver) init_controller(m66592); disable_controller(m66592); - device_del(&m66592->gadget.dev); m66592->driver = NULL; + return 0; } @@ -1566,10 +1526,10 @@ static int m66592_pullup(struct usb_gadget *gadget, int is_on) return 0; } -static struct usb_gadget_ops m66592_gadget_ops = { +static const struct usb_gadget_ops m66592_gadget_ops = { .get_frame = m66592_get_frame, - .start = m66592_start, - .stop = m66592_stop, + .udc_start = m66592_udc_start, + .udc_stop = m66592_udc_stop, .pullup = m66592_pullup, }; @@ -1578,6 +1538,7 @@ static int __exit m66592_remove(struct platform_device *pdev) struct m66592 *m66592 = dev_get_drvdata(&pdev->dev); usb_del_gadget_udc(&m66592->gadget); + device_del(&m66592->gadget.dev); del_timer_sync(&m66592->timer); iounmap(m66592->reg); @@ -1706,8 +1667,6 @@ static int __init m66592_probe(struct platform_device *pdev) m66592->pipenum2ep[0] = &m66592->ep[0]; m66592->epaddr2ep[0] = &m66592->ep[0]; - the_controller = m66592; - m66592->ep0_req = m66592_alloc_request(&m66592->ep[0].ep, GFP_KERNEL); if (m66592->ep0_req == NULL) goto clean_up3; @@ -1715,6 +1674,12 @@ static int __init m66592_probe(struct platform_device *pdev) init_controller(m66592); + ret = device_add(&m66592->gadget.dev); + if (ret) { + pr_err("device_add error (%d)\n", ret); + goto err_device_add; + } + ret = usb_add_gadget_udc(&pdev->dev, &m66592->gadget); if (ret) goto err_add_udc; @@ -1723,6 +1688,9 @@ static int __init m66592_probe(struct platform_device *pdev) return 0; err_add_udc: + device_del(&m66592->gadget.dev); + +err_device_add: m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req); clean_up3: @@ -1753,14 +1721,4 @@ static struct platform_driver m66592_driver = { }, }; -static int __init m66592_udc_init(void) -{ - return platform_driver_probe(&m66592_driver, m66592_probe); -} -module_init(m66592_udc_init); - -static void __exit m66592_udc_cleanup(void) -{ - platform_driver_unregister(&m66592_driver); -} -module_exit(m66592_udc_cleanup); +module_platform_driver_probe(m66592_driver, m66592_probe); diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h index 16c7e14678b..96d49d7bfb6 100644 --- a/drivers/usb/gadget/m66592-udc.h +++ b/drivers/usb/gadget/m66592-udc.h @@ -492,6 +492,7 @@ struct m66592 { int isochronous; int num_dma; }; +#define to_m66592(g) (container_of((g), struct m66592, gadget)) #define gadget_to_m66592(_gadget) container_of(_gadget, struct m66592, gadget) #define m66592_to_gadget(m66592) (&m66592->gadget) diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c index 88472bf7dbb..20bbbf917fc 100644 --- a/drivers/usb/gadget/multi.c +++ b/drivers/usb/gadget/multi.c @@ -16,6 +16,7 @@ #include <linux/kernel.h> #include <linux/module.h> +#include "u_serial.h" #if defined USB_ETH_RNDIS # undef USB_ETH_RNDIS #endif @@ -42,9 +43,6 @@ MODULE_LICENSE("GPL"); */ #include "f_mass_storage.c" -#include "u_serial.c" -#include "f_acm.c" - #include "f_ecm.c" #include "f_subset.c" #ifdef USB_ETH_RNDIS @@ -137,10 +135,13 @@ static struct fsg_common fsg_common; static u8 hostaddr[ETH_ALEN]; +static unsigned char tty_line; +static struct usb_function_instance *fi_acm; /********** RNDIS **********/ #ifdef USB_ETH_RNDIS +static struct usb_function *f_acm_rndis; static __init int rndis_do_config(struct usb_configuration *c) { @@ -155,15 +156,25 @@ static __init int rndis_do_config(struct usb_configuration *c) if (ret < 0) return ret; - ret = acm_bind_config(c, 0); - if (ret < 0) - return ret; + f_acm_rndis = usb_get_function(fi_acm); + if (IS_ERR(f_acm_rndis)) + goto err_func_acm; + + ret = usb_add_function(c, f_acm_rndis); + if (ret) + goto err_conf; ret = fsg_bind_config(c->cdev, c, &fsg_common); if (ret < 0) - return ret; + goto err_fsg; return 0; +err_fsg: + usb_remove_function(c, f_acm_rndis); +err_conf: + usb_put_function(f_acm_rndis); +err_func_acm: + return ret; } static int rndis_config_register(struct usb_composite_dev *cdev) @@ -192,6 +203,7 @@ static int rndis_config_register(struct usb_composite_dev *cdev) /********** CDC ECM **********/ #ifdef CONFIG_USB_G_MULTI_CDC +static struct usb_function *f_acm_multi; static __init int cdc_do_config(struct usb_configuration *c) { @@ -206,15 +218,26 @@ static __init int cdc_do_config(struct usb_configuration *c) if (ret < 0) return ret; - ret = acm_bind_config(c, 0); - if (ret < 0) - return ret; + /* implicit port_num is zero */ + f_acm_multi = usb_get_function(fi_acm); + if (IS_ERR(f_acm_multi)) + goto err_func_acm; + + ret = usb_add_function(c, f_acm_multi); + if (ret) + goto err_conf; ret = fsg_bind_config(c->cdev, c, &fsg_common); if (ret < 0) - return ret; + goto err_fsg; return 0; +err_fsg: + usb_remove_function(c, f_acm_multi); +err_conf: + usb_put_function(f_acm_multi); +err_func_acm: + return ret; } static int cdc_config_register(struct usb_composite_dev *cdev) @@ -243,10 +266,10 @@ static int cdc_config_register(struct usb_composite_dev *cdev) /****************************** Gadget Bind ******************************/ - static int __ref multi_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; + struct f_serial_opts *opts; int status; if (!can_support_ecm(cdev->gadget)) { @@ -261,10 +284,19 @@ static int __ref multi_bind(struct usb_composite_dev *cdev) return status; /* set up serial link layer */ - status = gserial_setup(cdev->gadget, 1); + status = gserial_alloc_line(&tty_line); if (status < 0) goto fail0; + fi_acm = usb_get_function_instance("acm"); + if (IS_ERR(fi_acm)) { + status = PTR_ERR(fi_acm); + goto fail0dot5; + } + + opts = container_of(fi_acm, struct f_serial_opts, func_inst); + opts->port_num = tty_line; + /* set up mass storage function */ { void *retp; @@ -301,7 +333,9 @@ static int __ref multi_bind(struct usb_composite_dev *cdev) fail2: fsg_common_put(&fsg_common); fail1: - gserial_cleanup(); + usb_put_function_instance(fi_acm); +fail0dot5: + gserial_free_line(tty_line); fail0: gether_cleanup(); return status; @@ -309,7 +343,14 @@ fail0: static int __exit multi_unbind(struct usb_composite_dev *cdev) { - gserial_cleanup(); +#ifdef CONFIG_USB_G_MULTI_CDC + usb_put_function(f_acm_multi); +#endif +#ifdef USB_ETH_RNDIS + usb_put_function(f_acm_rndis); +#endif + usb_put_function_instance(fi_acm); + gserial_free_line(tty_line); gether_cleanup(); return 0; } diff --git a/drivers/usb/gadget/mv_u3d_core.c b/drivers/usb/gadget/mv_u3d_core.c index 8cfd5b028db..b5cea273c95 100644 --- a/drivers/usb/gadget/mv_u3d_core.c +++ b/drivers/usb/gadget/mv_u3d_core.c @@ -1763,7 +1763,7 @@ static void mv_u3d_gadget_release(struct device *dev) dev_dbg(dev, "%s\n", __func__); } -static __devexit int mv_u3d_remove(struct platform_device *dev) +static int mv_u3d_remove(struct platform_device *dev) { struct mv_u3d *u3d = platform_get_drvdata(dev); diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c index ea45224f78c..c8cf959057f 100644 --- a/drivers/usb/gadget/mv_udc_core.c +++ b/drivers/usb/gadget/mv_udc_core.c @@ -61,9 +61,6 @@ static DECLARE_COMPLETION(release_done); static const char driver_name[] = "mv_udc"; static const char driver_desc[] = DRIVER_DESC; -/* controller device global variable */ -static struct mv_udc *the_controller; - static void nuke(struct mv_ep *ep, int status); static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver); @@ -1012,7 +1009,7 @@ static void udc_clock_enable(struct mv_udc *udc) unsigned int i; for (i = 0; i < udc->clknum; i++) - clk_enable(udc->clk[i]); + clk_prepare_enable(udc->clk[i]); } static void udc_clock_disable(struct mv_udc *udc) @@ -1020,7 +1017,7 @@ static void udc_clock_disable(struct mv_udc *udc) unsigned int i; for (i = 0; i < udc->clknum; i++) - clk_disable(udc->clk[i]); + clk_disable_unprepare(udc->clk[i]); } static void udc_stop(struct mv_udc *udc) @@ -1268,9 +1265,8 @@ static int mv_udc_pullup(struct usb_gadget *gadget, int is_on) return retval; } -static int mv_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); -static int mv_udc_stop(struct usb_gadget_driver *driver); +static int mv_udc_start(struct usb_gadget *, struct usb_gadget_driver *); +static int mv_udc_stop(struct usb_gadget *, struct usb_gadget_driver *); /* device controller usb_gadget_ops structure */ static const struct usb_gadget_ops mv_ops = { @@ -1285,8 +1281,8 @@ static const struct usb_gadget_ops mv_ops = { /* D+ pullup, software-controlled connect/disconnect to USB host */ .pullup = mv_udc_pullup, - .start = mv_udc_start, - .stop = mv_udc_stop, + .udc_start = mv_udc_start, + .udc_stop = mv_udc_stop, }; static int eps_init(struct mv_udc *udc) @@ -1373,15 +1369,14 @@ static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver) } } -static int mv_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) +static int mv_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct mv_udc *udc = the_controller; + struct mv_udc *udc; int retval = 0; unsigned long flags; - if (!udc) - return -ENODEV; + udc = container_of(gadget, struct mv_udc, gadget); if (udc->driver) return -EBUSY; @@ -1399,26 +1394,14 @@ static int mv_udc_start(struct usb_gadget_driver *driver, spin_unlock_irqrestore(&udc->lock, flags); - retval = bind(&udc->gadget, driver); - if (retval) { - dev_err(&udc->dev->dev, "bind to driver %s --> %d\n", - driver->driver.name, retval); - udc->driver = NULL; - udc->gadget.dev.driver = NULL; - return retval; - } - - if (!IS_ERR_OR_NULL(udc->transceiver)) { + if (udc->transceiver) { retval = otg_set_peripheral(udc->transceiver->otg, &udc->gadget); if (retval) { dev_err(&udc->dev->dev, "unable to register peripheral to otg\n"); - if (driver->unbind) { - driver->unbind(&udc->gadget); - udc->gadget.dev.driver = NULL; - udc->driver = NULL; - } + udc->driver = NULL; + udc->gadget.dev.driver = NULL; return retval; } } @@ -1433,13 +1416,13 @@ static int mv_udc_start(struct usb_gadget_driver *driver, return 0; } -static int mv_udc_stop(struct usb_gadget_driver *driver) +static int mv_udc_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct mv_udc *udc = the_controller; + struct mv_udc *udc; unsigned long flags; - if (!udc) - return -ENODEV; + udc = container_of(gadget, struct mv_udc, gadget); spin_lock_irqsave(&udc->lock, flags); @@ -1454,7 +1437,6 @@ static int mv_udc_stop(struct usb_gadget_driver *driver) spin_unlock_irqrestore(&udc->lock, flags); /* unbind gadget driver */ - driver->unbind(&udc->gadget); udc->gadget.dev.driver = NULL; udc->driver = NULL; @@ -1472,10 +1454,13 @@ static void mv_set_ptc(struct mv_udc *udc, u32 mode) static void prime_status_complete(struct usb_ep *ep, struct usb_request *_req) { - struct mv_udc *udc = the_controller; + struct mv_ep *mvep = container_of(ep, struct mv_ep, ep); struct mv_req *req = container_of(_req, struct mv_req, req); + struct mv_udc *udc; unsigned long flags; + udc = mvep->udc; + dev_info(&udc->dev->dev, "switch to test mode %d\n", req->test_mode); spin_lock_irqsave(&udc->lock, flags); @@ -2123,15 +2108,18 @@ static void mv_udc_vbus_work(struct work_struct *work) /* release device structure */ static void gadget_release(struct device *_dev) { - struct mv_udc *udc = the_controller; + struct mv_udc *udc; + + udc = dev_get_drvdata(_dev); complete(udc->done); } -static int __devexit mv_udc_remove(struct platform_device *dev) +static int mv_udc_remove(struct platform_device *pdev) { - struct mv_udc *udc = the_controller; - int clk_i; + struct mv_udc *udc; + + udc = platform_get_drvdata(pdev); usb_del_gadget_udc(&udc->gadget); @@ -2140,57 +2128,27 @@ static int __devexit mv_udc_remove(struct platform_device *dev) destroy_workqueue(udc->qwork); } - /* - * If we have transceiver inited, - * then vbus irq will not be requested in udc driver. - */ - if (udc->pdata && udc->pdata->vbus - && udc->clock_gating && IS_ERR_OR_NULL(udc->transceiver)) - free_irq(udc->pdata->vbus->irq, &dev->dev); - /* free memory allocated in probe */ if (udc->dtd_pool) dma_pool_destroy(udc->dtd_pool); if (udc->ep_dqh) - dma_free_coherent(&dev->dev, udc->ep_dqh_size, + dma_free_coherent(&pdev->dev, udc->ep_dqh_size, udc->ep_dqh, udc->ep_dqh_dma); - kfree(udc->eps); - - if (udc->irq) - free_irq(udc->irq, &dev->dev); - mv_udc_disable(udc); - if (udc->cap_regs) - iounmap(udc->cap_regs); - - if (udc->phy_regs) - iounmap(udc->phy_regs); - - if (udc->status_req) { - kfree(udc->status_req->req.buf); - kfree(udc->status_req); - } - - for (clk_i = 0; clk_i <= udc->clknum; clk_i++) - clk_put(udc->clk[clk_i]); - device_unregister(&udc->gadget.dev); /* free dev, wait for the release() finished */ wait_for_completion(udc->done); - kfree(udc); - - the_controller = NULL; return 0; } -static int __devinit mv_udc_probe(struct platform_device *dev) +static int mv_udc_probe(struct platform_device *pdev) { - struct mv_usb_platform_data *pdata = dev->dev.platform_data; + struct mv_usb_platform_data *pdata = pdev->dev.platform_data; struct mv_udc *udc; int retval = 0; int clk_i = 0; @@ -2198,71 +2156,73 @@ static int __devinit mv_udc_probe(struct platform_device *dev) size_t size; if (pdata == NULL) { - dev_err(&dev->dev, "missing platform_data\n"); + dev_err(&pdev->dev, "missing platform_data\n"); return -ENODEV; } size = sizeof(*udc) + sizeof(struct clk *) * pdata->clknum; - udc = kzalloc(size, GFP_KERNEL); + udc = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); if (udc == NULL) { - dev_err(&dev->dev, "failed to allocate memory for udc\n"); + dev_err(&pdev->dev, "failed to allocate memory for udc\n"); return -ENOMEM; } - the_controller = udc; udc->done = &release_done; - udc->pdata = dev->dev.platform_data; + udc->pdata = pdev->dev.platform_data; spin_lock_init(&udc->lock); - udc->dev = dev; + udc->dev = pdev; #ifdef CONFIG_USB_OTG_UTILS - if (pdata->mode == MV_USB_MODE_OTG) - udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + if (pdata->mode == MV_USB_MODE_OTG) { + udc->transceiver = devm_usb_get_phy(&pdev->dev, + USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(udc->transceiver)) { + udc->transceiver = NULL; + return -ENODEV; + } + } #endif udc->clknum = pdata->clknum; for (clk_i = 0; clk_i < udc->clknum; clk_i++) { - udc->clk[clk_i] = clk_get(&dev->dev, pdata->clkname[clk_i]); + udc->clk[clk_i] = devm_clk_get(&pdev->dev, + pdata->clkname[clk_i]); if (IS_ERR(udc->clk[clk_i])) { retval = PTR_ERR(udc->clk[clk_i]); - goto err_put_clk; + return retval; } } r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "capregs"); if (r == NULL) { - dev_err(&dev->dev, "no I/O memory resource defined\n"); - retval = -ENODEV; - goto err_put_clk; + dev_err(&pdev->dev, "no I/O memory resource defined\n"); + return -ENODEV; } udc->cap_regs = (struct mv_cap_regs __iomem *) - ioremap(r->start, resource_size(r)); + devm_ioremap(&pdev->dev, r->start, resource_size(r)); if (udc->cap_regs == NULL) { - dev_err(&dev->dev, "failed to map I/O memory\n"); - retval = -EBUSY; - goto err_put_clk; + dev_err(&pdev->dev, "failed to map I/O memory\n"); + return -EBUSY; } r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "phyregs"); if (r == NULL) { - dev_err(&dev->dev, "no phy I/O memory resource defined\n"); - retval = -ENODEV; - goto err_iounmap_capreg; + dev_err(&pdev->dev, "no phy I/O memory resource defined\n"); + return -ENODEV; } udc->phy_regs = ioremap(r->start, resource_size(r)); if (udc->phy_regs == NULL) { - dev_err(&dev->dev, "failed to map phy I/O memory\n"); - retval = -EBUSY; - goto err_iounmap_capreg; + dev_err(&pdev->dev, "failed to map phy I/O memory\n"); + return -EBUSY; } /* we will acces controller register, so enable the clk */ retval = mv_udc_enable_internal(udc); if (retval) - goto err_iounmap_phyreg; + return retval; udc->op_regs = (struct mv_op_regs __iomem *)((unsigned long)udc->cap_regs @@ -2279,11 +2239,11 @@ static int __devinit mv_udc_probe(struct platform_device *dev) size = udc->max_eps * sizeof(struct mv_dqh) *2; size = (size + DQH_ALIGNMENT - 1) & ~(DQH_ALIGNMENT - 1); - udc->ep_dqh = dma_alloc_coherent(&dev->dev, size, + udc->ep_dqh = dma_alloc_coherent(&pdev->dev, size, &udc->ep_dqh_dma, GFP_KERNEL); if (udc->ep_dqh == NULL) { - dev_err(&dev->dev, "allocate dQH memory failed\n"); + dev_err(&pdev->dev, "allocate dQH memory failed\n"); retval = -ENOMEM; goto err_disable_clock; } @@ -2291,7 +2251,7 @@ static int __devinit mv_udc_probe(struct platform_device *dev) /* create dTD dma_pool resource */ udc->dtd_pool = dma_pool_create("mv_dtd", - &dev->dev, + &pdev->dev, sizeof(struct mv_dtd), DTD_ALIGNMENT, DMA_BOUNDARY); @@ -2302,19 +2262,20 @@ static int __devinit mv_udc_probe(struct platform_device *dev) } size = udc->max_eps * sizeof(struct mv_ep) *2; - udc->eps = kzalloc(size, GFP_KERNEL); + udc->eps = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); if (udc->eps == NULL) { - dev_err(&dev->dev, "allocate ep memory failed\n"); + dev_err(&pdev->dev, "allocate ep memory failed\n"); retval = -ENOMEM; goto err_destroy_dma; } /* initialize ep0 status request structure */ - udc->status_req = kzalloc(sizeof(struct mv_req), GFP_KERNEL); + udc->status_req = devm_kzalloc(&pdev->dev, sizeof(struct mv_req), + GFP_KERNEL); if (!udc->status_req) { - dev_err(&dev->dev, "allocate status_req memory failed\n"); + dev_err(&pdev->dev, "allocate status_req memory failed\n"); retval = -ENOMEM; - goto err_free_eps; + goto err_destroy_dma; } INIT_LIST_HEAD(&udc->status_req->queue); @@ -2329,17 +2290,17 @@ static int __devinit mv_udc_probe(struct platform_device *dev) r = platform_get_resource(udc->dev, IORESOURCE_IRQ, 0); if (r == NULL) { - dev_err(&dev->dev, "no IRQ resource defined\n"); + dev_err(&pdev->dev, "no IRQ resource defined\n"); retval = -ENODEV; - goto err_free_status_req; + goto err_destroy_dma; } udc->irq = r->start; - if (request_irq(udc->irq, mv_udc_irq, + if (devm_request_irq(&pdev->dev, udc->irq, mv_udc_irq, IRQF_SHARED, driver_name, udc)) { - dev_err(&dev->dev, "Request irq %d for UDC failed\n", + dev_err(&pdev->dev, "Request irq %d for UDC failed\n", udc->irq); retval = -ENODEV; - goto err_free_status_req; + goto err_destroy_dma; } /* initialize gadget structure */ @@ -2351,26 +2312,27 @@ static int __devinit mv_udc_probe(struct platform_device *dev) /* the "gadget" abstracts/virtualizes the controller */ dev_set_name(&udc->gadget.dev, "gadget"); - udc->gadget.dev.parent = &dev->dev; - udc->gadget.dev.dma_mask = dev->dev.dma_mask; + udc->gadget.dev.parent = &pdev->dev; + udc->gadget.dev.dma_mask = pdev->dev.dma_mask; udc->gadget.dev.release = gadget_release; udc->gadget.name = driver_name; /* gadget name */ retval = device_register(&udc->gadget.dev); if (retval) - goto err_free_irq; + goto err_destroy_dma; eps_init(udc); /* VBUS detect: we can disable/enable clock on demand.*/ - if (!IS_ERR_OR_NULL(udc->transceiver)) + if (udc->transceiver) udc->clock_gating = 1; else if (pdata->vbus) { udc->clock_gating = 1; - retval = request_threaded_irq(pdata->vbus->irq, NULL, + retval = devm_request_threaded_irq(&pdev->dev, + pdata->vbus->irq, NULL, mv_udc_vbus_irq, IRQF_ONESHOT, "vbus", udc); if (retval) { - dev_info(&dev->dev, + dev_info(&pdev->dev, "Can not request irq for VBUS, " "disable clock gating\n"); udc->clock_gating = 0; @@ -2378,7 +2340,7 @@ static int __devinit mv_udc_probe(struct platform_device *dev) udc->qwork = create_singlethread_workqueue("mv_udc_queue"); if (!udc->qwork) { - dev_err(&dev->dev, "cannot create workqueue\n"); + dev_err(&pdev->dev, "cannot create workqueue\n"); retval = -ENOMEM; goto err_unregister; } @@ -2396,53 +2358,40 @@ static int __devinit mv_udc_probe(struct platform_device *dev) else udc->vbus_active = 1; - retval = usb_add_gadget_udc(&dev->dev, &udc->gadget); + retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget); if (retval) - goto err_unregister; + goto err_create_workqueue; - dev_info(&dev->dev, "successful probe UDC device %s clock gating.\n", + platform_set_drvdata(pdev, udc); + dev_info(&pdev->dev, "successful probe UDC device %s clock gating.\n", udc->clock_gating ? "with" : "without"); return 0; +err_create_workqueue: + destroy_workqueue(udc->qwork); err_unregister: - if (udc->pdata && udc->pdata->vbus - && udc->clock_gating && IS_ERR_OR_NULL(udc->transceiver)) - free_irq(pdata->vbus->irq, &dev->dev); device_unregister(&udc->gadget.dev); -err_free_irq: - free_irq(udc->irq, &dev->dev); -err_free_status_req: - kfree(udc->status_req->req.buf); - kfree(udc->status_req); -err_free_eps: - kfree(udc->eps); err_destroy_dma: dma_pool_destroy(udc->dtd_pool); err_free_dma: - dma_free_coherent(&dev->dev, udc->ep_dqh_size, + dma_free_coherent(&pdev->dev, udc->ep_dqh_size, udc->ep_dqh, udc->ep_dqh_dma); err_disable_clock: mv_udc_disable_internal(udc); -err_iounmap_phyreg: - iounmap(udc->phy_regs); -err_iounmap_capreg: - iounmap(udc->cap_regs); -err_put_clk: - for (clk_i--; clk_i >= 0; clk_i--) - clk_put(udc->clk[clk_i]); - the_controller = NULL; - kfree(udc); + return retval; } #ifdef CONFIG_PM -static int mv_udc_suspend(struct device *_dev) +static int mv_udc_suspend(struct device *dev) { - struct mv_udc *udc = the_controller; + struct mv_udc *udc; + + udc = dev_get_drvdata(dev); /* if OTG is enabled, the following will be done in OTG driver*/ - if (!IS_ERR_OR_NULL(udc->transceiver)) + if (udc->transceiver) return 0; if (udc->pdata->vbus && udc->pdata->vbus->poll) @@ -2469,13 +2418,15 @@ static int mv_udc_suspend(struct device *_dev) return 0; } -static int mv_udc_resume(struct device *_dev) +static int mv_udc_resume(struct device *dev) { - struct mv_udc *udc = the_controller; + struct mv_udc *udc; int retval; + udc = dev_get_drvdata(dev); + /* if OTG is enabled, the following will be done in OTG driver*/ - if (!IS_ERR_OR_NULL(udc->transceiver)) + if (udc->transceiver) return 0; if (!udc->clock_gating) { @@ -2499,11 +2450,12 @@ static const struct dev_pm_ops mv_udc_pm_ops = { }; #endif -static void mv_udc_shutdown(struct platform_device *dev) +static void mv_udc_shutdown(struct platform_device *pdev) { - struct mv_udc *udc = the_controller; + struct mv_udc *udc; u32 mode; + udc = platform_get_drvdata(pdev); /* reset controller mode to IDLE */ mv_udc_enable(udc); mode = readl(&udc->op_regs->usbmode); @@ -2514,7 +2466,7 @@ static void mv_udc_shutdown(struct platform_device *dev) static struct platform_driver udc_driver = { .probe = mv_udc_probe, - .remove = __exit_p(mv_udc_remove), + .remove = mv_udc_remove, .shutdown = mv_udc_shutdown, .driver = { .owner = THIS_MODULE, diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c index c009263a47e..d226058e3b8 100644 --- a/drivers/usb/gadget/net2272.c +++ b/drivers/usb/gadget/net2272.c @@ -2193,7 +2193,7 @@ net2272_gadget_release(struct device *_dev) /*---------------------------------------------------------------------------*/ -static void __devexit +static void net2272_remove(struct net2272 *dev) { usb_del_gadget_udc(&dev->gadget); @@ -2215,8 +2215,7 @@ net2272_remove(struct net2272 *dev) dev_info(dev->dev, "unbind\n"); } -static struct net2272 * __devinit -net2272_probe_init(struct device *dev, unsigned int irq) +static struct net2272 *net2272_probe_init(struct device *dev, unsigned int irq) { struct net2272 *ret; @@ -2246,7 +2245,7 @@ net2272_probe_init(struct device *dev, unsigned int irq) return ret; } -static int __devinit +static int net2272_probe_fin(struct net2272 *dev, unsigned int irqflags) { int ret; @@ -2306,7 +2305,7 @@ err_add_udc: * don't respond over USB until a gadget driver binds to us */ -static int __devinit +static int net2272_rdk1_probe(struct pci_dev *pdev, struct net2272 *dev) { unsigned long resource, len, tmp; @@ -2389,7 +2388,7 @@ net2272_rdk1_probe(struct pci_dev *pdev, struct net2272 *dev) return ret; } -static int __devinit +static int net2272_rdk2_probe(struct pci_dev *pdev, struct net2272 *dev) { unsigned long resource, len; @@ -2447,7 +2446,7 @@ net2272_rdk2_probe(struct pci_dev *pdev, struct net2272 *dev) return ret; } -static int __devinit +static int net2272_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct net2272 *dev; @@ -2489,7 +2488,7 @@ net2272_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) return ret; } -static void __devexit +static void net2272_rdk1_remove(struct pci_dev *pdev, struct net2272 *dev) { int i; @@ -2511,7 +2510,7 @@ net2272_rdk1_remove(struct pci_dev *pdev, struct net2272 *dev) } } -static void __devexit +static void net2272_rdk2_remove(struct pci_dev *pdev, struct net2272 *dev) { int i; @@ -2530,7 +2529,7 @@ net2272_rdk2_remove(struct pci_dev *pdev, struct net2272 *dev) pci_resource_len(pdev, i)); } -static void __devexit +static void net2272_pci_remove(struct pci_dev *pdev) { struct net2272 *dev = pci_get_drvdata(pdev); @@ -2549,7 +2548,7 @@ net2272_pci_remove(struct pci_dev *pdev) } /* Table of matching PCI IDs */ -static struct pci_device_id __devinitdata pci_ids[] = { +static struct pci_device_id pci_ids[] = { { /* RDK 1 card */ .class = ((PCI_CLASS_BRIDGE_OTHER << 8) | 0xfe), .class_mask = 0, @@ -2575,7 +2574,7 @@ static struct pci_driver net2272_pci_driver = { .id_table = pci_ids, .probe = net2272_pci_probe, - .remove = __devexit_p(net2272_pci_remove), + .remove = net2272_pci_remove, }; static int net2272_pci_register(void) @@ -2595,7 +2594,7 @@ static inline void net2272_pci_unregister(void) { } /*---------------------------------------------------------------------------*/ -static int __devinit +static int net2272_plat_probe(struct platform_device *pdev) { struct net2272 *dev; @@ -2661,7 +2660,7 @@ net2272_plat_probe(struct platform_device *pdev) return ret; } -static int __devexit +static int net2272_plat_remove(struct platform_device *pdev) { struct net2272 *dev = platform_get_drvdata(pdev); @@ -2678,7 +2677,7 @@ net2272_plat_remove(struct platform_device *pdev) static struct platform_driver net2272_plat_driver = { .probe = net2272_plat_probe, - .remove = __devexit_p(net2272_plat_remove), + .remove = net2272_plat_remove, .driver = { .name = driver_name, .owner = THIS_MODULE, diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index ac335af154b..a1b650e1133 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -9,7 +9,7 @@ * CODE STATUS HIGHLIGHTS * * This driver should work well with most "gadget" drivers, including - * the File Storage, Serial, and Ethernet/RNDIS gadget drivers + * the Mass Storage, Serial, and Ethernet/RNDIS gadget drivers * as well as Gadget Zero and Gadgetfs. * * DMA is enabled by default. Drivers using transfer queues might use @@ -116,6 +116,10 @@ static bool enable_suspend = 0; /* "modprobe net2280 enable_suspend=1" etc */ module_param (enable_suspend, bool, S_IRUGO); +/* force full-speed operation */ +static bool full_speed; +module_param(full_speed, bool, 0444); +MODULE_PARM_DESC(full_speed, "force full-speed mode -- for testing only!"); #define DIR_STRING(bAddress) (((bAddress) & USB_DIR_IN) ? "in" : "out") @@ -1899,6 +1903,10 @@ static int net2280_start(struct usb_gadget *_gadget, retval = device_create_file (&dev->pdev->dev, &dev_attr_queues); if (retval) goto err_func; + /* Enable force-full-speed testing mode, if desired */ + if (full_speed) + writel(1 << FORCE_FULL_SPEED_MODE, &dev->usb->xcvrdiag); + /* ... then enable host detection and ep0; and we're ready * for set_configuration as well as eventual disconnect. */ @@ -1957,6 +1965,10 @@ static int net2280_stop(struct usb_gadget *_gadget, dev->driver = NULL; net2280_led_active (dev, 0); + + /* Disable full-speed test mode */ + writel(0, &dev->usb->xcvrdiag); + device_remove_file (&dev->pdev->dev, &dev_attr_function); device_remove_file (&dev->pdev->dev, &dev_attr_queues); @@ -2841,6 +2853,9 @@ static void net2280_shutdown (struct pci_dev *pdev) /* disable the pullup so the host will think we're gone */ writel (0, &dev->usb->usbctl); + + /* Disable full-speed test mode */ + writel(0, &dev->usb->xcvrdiag); } diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c index 661600abace..def37403989 100644 --- a/drivers/usb/gadget/nokia.c +++ b/drivers/usb/gadget/nokia.c @@ -37,7 +37,7 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ -#include "u_serial.c" +#define USB_FACM_INCLUDED #include "f_acm.c" #include "f_ecm.c" #include "f_obex.c" @@ -101,6 +101,15 @@ MODULE_LICENSE("GPL"); static u8 hostaddr[ETH_ALEN]; +enum { + TTY_PORT_OBEX0, + TTY_PORT_OBEX1, + TTY_PORT_ACM, + TTY_PORTS_MAX, +}; + +static unsigned char tty_lines[TTY_PORTS_MAX]; + static int __init nokia_bind_config(struct usb_configuration *c) { int status = 0; @@ -109,15 +118,15 @@ static int __init nokia_bind_config(struct usb_configuration *c) if (status) printk(KERN_DEBUG "could not bind phonet config\n"); - status = obex_bind_config(c, 0); + status = obex_bind_config(c, tty_lines[TTY_PORT_OBEX0]); if (status) printk(KERN_DEBUG "could not bind obex config %d\n", 0); - status = obex_bind_config(c, 1); + status = obex_bind_config(c, tty_lines[TTY_PORT_OBEX1]); if (status) printk(KERN_DEBUG "could not bind obex config %d\n", 0); - status = acm_bind_config(c, 2); + status = acm_bind_config(c, tty_lines[TTY_PORT_ACM]); if (status) printk(KERN_DEBUG "could not bind acm config\n"); @@ -133,7 +142,7 @@ static struct usb_configuration nokia_config_500ma_driver = { .bConfigurationValue = 1, /* .iConfiguration = DYNAMIC */ .bmAttributes = USB_CONFIG_ATT_ONE, - .bMaxPower = 250, /* 500mA */ + .MaxPower = 500, }; static struct usb_configuration nokia_config_100ma_driver = { @@ -141,21 +150,24 @@ static struct usb_configuration nokia_config_100ma_driver = { .bConfigurationValue = 2, /* .iConfiguration = DYNAMIC */ .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, - .bMaxPower = 50, /* 100 mA */ + .MaxPower = 100, }; static int __init nokia_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; int status; + int cur_line; status = gphonet_setup(cdev->gadget); if (status < 0) goto err_phonet; - status = gserial_setup(cdev->gadget, 3); - if (status < 0) - goto err_serial; + for (cur_line = 0; cur_line < TTY_PORTS_MAX; cur_line++) { + status = gserial_alloc_line(&tty_lines[cur_line]); + if (status) + goto err_ether; + } status = gether_setup(cdev->gadget, hostaddr); if (status < 0) @@ -192,8 +204,10 @@ static int __init nokia_bind(struct usb_composite_dev *cdev) err_usb: gether_cleanup(); err_ether: - gserial_cleanup(); -err_serial: + cur_line--; + while (cur_line >= 0) + gserial_free_line(tty_lines[cur_line--]); + gphonet_cleanup(); err_phonet: return status; @@ -201,8 +215,13 @@ err_phonet: static int __exit nokia_unbind(struct usb_composite_dev *cdev) { + int i; + gphonet_cleanup(); - gserial_cleanup(); + + for (i = 0; i < TTY_PORTS_MAX; i++) + gserial_free_line(tty_lines[i]); + gether_cleanup(); return 0; diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 2a4749c3eb3..f8445653577 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -44,7 +44,7 @@ #include <asm/unaligned.h> #include <asm/mach-types.h> -#include <plat/dma.h> +#include <linux/omap-dma.h> #include <mach/usb.h> @@ -61,6 +61,9 @@ #define DRIVER_DESC "OMAP UDC driver" #define DRIVER_VERSION "4 October 2004" +#define OMAP_DMA_USB_W2FC_TX0 29 +#define OMAP_DMA_USB_W2FC_RX0 26 + /* * The OMAP UDC needs _very_ early endpoint setup: before enabling the * D+ pullup to allow enumeration. That's too early for the gadget @@ -1307,19 +1310,20 @@ static int omap_pullup(struct usb_gadget *gadget, int is_on) return 0; } -static int omap_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); -static int omap_udc_stop(struct usb_gadget_driver *driver); +static int omap_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver); +static int omap_udc_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver); -static struct usb_gadget_ops omap_gadget_ops = { +static const struct usb_gadget_ops omap_gadget_ops = { .get_frame = omap_get_frame, .wakeup = omap_wakeup, .set_selfpowered = omap_set_selfpowered, .vbus_session = omap_vbus_session, .vbus_draw = omap_vbus_draw, .pullup = omap_pullup, - .start = omap_udc_start, - .stop = omap_udc_stop, + .udc_start = omap_udc_start, + .udc_stop = omap_udc_stop, }; /*-------------------------------------------------------------------------*/ @@ -2039,28 +2043,15 @@ static inline int machine_without_vbus_sense(void) || cpu_is_omap7xx(); } -static int omap_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) +static int omap_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) { int status = -ENODEV; struct omap_ep *ep; unsigned long flags; - /* basic sanity tests */ - if (!udc) - return -ENODEV; - if (!driver - /* FIXME if otg, check: driver->is_otg */ - || driver->max_speed < USB_SPEED_FULL - || !bind || !driver->setup) - return -EINVAL; spin_lock_irqsave(&udc->lock, flags); - if (udc->driver) { - spin_unlock_irqrestore(&udc->lock, flags); - return -EBUSY; - } - /* reset state */ list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { ep->irqs = 0; @@ -2082,15 +2073,6 @@ static int omap_udc_start(struct usb_gadget_driver *driver, if (udc->dc_clk != NULL) omap_udc_enable_clock(1); - status = bind(&udc->gadget, driver); - if (status) { - DBG("bind to %s --> %d\n", driver->driver.name, status); - udc->gadget.dev.driver = NULL; - udc->driver = NULL; - goto done; - } - DBG("bound to driver %s\n", driver->driver.name); - omap_writew(UDC_IRQ_SRC_MASK, UDC_IRQ_SRC); /* connect to bus through transceiver */ @@ -2122,19 +2104,16 @@ static int omap_udc_start(struct usb_gadget_driver *driver, done: if (udc->dc_clk != NULL) omap_udc_enable_clock(0); + return status; } -static int omap_udc_stop(struct usb_gadget_driver *driver) +static int omap_udc_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver) { unsigned long flags; int status = -ENODEV; - if (!udc) - return -ENODEV; - if (!driver || driver != udc->driver || !driver->unbind) - return -EINVAL; - if (udc->dc_clk != NULL) omap_udc_enable_clock(1); @@ -2150,13 +2129,12 @@ static int omap_udc_stop(struct usb_gadget_driver *driver) udc_quiesce(udc); spin_unlock_irqrestore(&udc->lock, flags); - driver->unbind(&udc->gadget); udc->gadget.dev.driver = NULL; udc->driver = NULL; if (udc->dc_clk != NULL) omap_udc_enable_clock(0); - DBG("unregistered driver '%s'\n", driver->driver.name); + return status; } @@ -2506,7 +2484,7 @@ static inline void remove_proc_file(void) {} * UDC_SYSCON_1.CFG_LOCK is set can now work. We won't use that * capability yet though. */ -static unsigned __devinit +static unsigned omap_ep_setup(char *name, u8 addr, u8 type, unsigned buf, unsigned maxp, int dbuf) { @@ -2624,7 +2602,7 @@ static void omap_udc_release(struct device *dev) udc = NULL; } -static int __devinit +static int omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv) { unsigned tmp, buf; @@ -2761,7 +2739,7 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv) return 0; } -static int __devinit omap_udc_probe(struct platform_device *pdev) +static int omap_udc_probe(struct platform_device *pdev) { int status = -ENODEV; int hmc; @@ -2974,7 +2952,7 @@ cleanup0: return status; } -static int __devexit omap_udc_remove(struct platform_device *pdev) +static int omap_udc_remove(struct platform_device *pdev) { DECLARE_COMPLETION_ONSTACK(done); @@ -3060,7 +3038,7 @@ static int omap_udc_resume(struct platform_device *dev) static struct platform_driver udc_driver = { .probe = omap_udc_probe, - .remove = __devexit_p(omap_udc_remove), + .remove = omap_udc_remove, .suspend = omap_udc_suspend, .resume = omap_udc_resume, .driver = { diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index 6490c0040e3..a787a8ef672 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -375,6 +375,7 @@ struct pch_udc_dev { struct pch_udc_cfg_data cfg_data; struct pch_vbus_gpio_data vbus_gpio; }; +#define to_pch_udc(g) (container_of((g), struct pch_udc_dev, gadget)) #define PCH_UDC_PCI_BAR 1 #define PCI_DEVICE_ID_INTEL_EG20T_UDC 0x8808 @@ -384,7 +385,6 @@ struct pch_udc_dev { static const char ep0_string[] = "ep0in"; static DEFINE_SPINLOCK(udc_stall_spinlock); /* stall spin lock */ -struct pch_udc_dev *pch_udc; /* pointer to device object */ static bool speed_fs; module_param_named(speed_fs, speed_fs, bool, S_IRUGO); MODULE_PARM_DESC(speed_fs, "true for Full speed operation"); @@ -1235,9 +1235,10 @@ static int pch_udc_pcd_vbus_draw(struct usb_gadget *gadget, unsigned int mA) return -EOPNOTSUPP; } -static int pch_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); -static int pch_udc_stop(struct usb_gadget_driver *driver); +static int pch_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver); +static int pch_udc_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver); static const struct usb_gadget_ops pch_udc_ops = { .get_frame = pch_udc_pcd_get_frame, .wakeup = pch_udc_pcd_wakeup, @@ -1245,8 +1246,8 @@ static const struct usb_gadget_ops pch_udc_ops = { .pullup = pch_udc_pcd_pullup, .vbus_session = pch_udc_pcd_vbus_session, .vbus_draw = pch_udc_pcd_vbus_draw, - .start = pch_udc_start, - .stop = pch_udc_stop, + .udc_start = pch_udc_start, + .udc_stop = pch_udc_stop, }; /** @@ -2981,40 +2982,15 @@ static int init_dma_pools(struct pch_udc_dev *dev) return 0; } -static int pch_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) +static int pch_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) { - struct pch_udc_dev *dev = pch_udc; - int retval; - - if (!driver || (driver->max_speed == USB_SPEED_UNKNOWN) || !bind || - !driver->setup || !driver->unbind || !driver->disconnect) { - dev_err(&dev->pdev->dev, - "%s: invalid driver parameter\n", __func__); - return -EINVAL; - } + struct pch_udc_dev *dev = to_pch_udc(g); - if (!dev) - return -ENODEV; - - if (dev->driver) { - dev_err(&dev->pdev->dev, "%s: already bound\n", __func__); - return -EBUSY; - } driver->driver.bus = NULL; dev->driver = driver; dev->gadget.dev.driver = &driver->driver; - /* Invoke the bind routine of the gadget driver */ - retval = bind(&dev->gadget, driver); - - if (retval) { - dev_err(&dev->pdev->dev, "%s: binding to %s returning %d\n", - __func__, driver->driver.name, retval); - dev->driver = NULL; - dev->gadget.dev.driver = NULL; - return retval; - } /* get ready for ep0 traffic */ pch_udc_setup_ep0(dev); @@ -3026,30 +3002,21 @@ static int pch_udc_start(struct usb_gadget_driver *driver, return 0; } -static int pch_udc_stop(struct usb_gadget_driver *driver) +static int pch_udc_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver) { - struct pch_udc_dev *dev = pch_udc; - - if (!dev) - return -ENODEV; - - if (!driver || (driver != dev->driver)) { - dev_err(&dev->pdev->dev, - "%s: invalid driver parameter\n", __func__); - return -EINVAL; - } + struct pch_udc_dev *dev = to_pch_udc(g); pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK); /* Assures that there are no pending requests with this driver */ - driver->disconnect(&dev->gadget); - driver->unbind(&dev->gadget); dev->gadget.dev.driver = NULL; dev->driver = NULL; dev->connected = 0; /* set SD */ pch_udc_set_disconnect(dev); + return 0; } @@ -3164,11 +3131,6 @@ static int pch_udc_probe(struct pci_dev *pdev, int retval; struct pch_udc_dev *dev; - /* one udc only */ - if (pch_udc) { - pr_err("%s: already probed\n", __func__); - return -EBUSY; - } /* init */ dev = kzalloc(sizeof *dev, GFP_KERNEL); if (!dev) { @@ -3207,7 +3169,6 @@ static int pch_udc_probe(struct pci_dev *pdev, retval = -ENODEV; goto finished; } - pch_udc = dev; /* initialize the hardware */ if (pch_udc_pcd_init(dev)) { retval = -ENODEV; diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index e156e3f2672..bf7a56b6d48 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -688,7 +688,7 @@ static int printer_fsync(struct file *fd, loff_t start, loff_t end, int datasync) { struct printer_dev *dev = fd->private_data; - struct inode *inode = fd->f_path.dentry->d_inode; + struct inode *inode = file_inode(fd); unsigned long flags; int tx_list_empty; @@ -983,8 +983,10 @@ static int __init printer_func_bind(struct usb_configuration *c, { struct printer_dev *dev = container_of(f, struct printer_dev, function); struct usb_composite_dev *cdev = c->cdev; - struct usb_ep *in_ep, *out_ep; + struct usb_ep *in_ep; + struct usb_ep *out_ep = NULL; int id; + int ret; id = usb_interface_id(c, f); if (id < 0) @@ -1010,6 +1012,11 @@ autoconf_fail: hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress; hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress; + ret = usb_assign_descriptors(f, fs_printer_function, + hs_printer_function, NULL); + if (ret) + return ret; + dev->in_ep = in_ep; dev->out_ep = out_ep; return 0; @@ -1018,6 +1025,7 @@ autoconf_fail: static void printer_func_unbind(struct usb_configuration *c, struct usb_function *f) { + usb_free_all_descriptors(f); } static int printer_func_set_alt(struct usb_function *f, @@ -1110,8 +1118,6 @@ static int __init printer_bind_config(struct usb_configuration *c) dev = &usb_printer_gadget; dev->function.name = shortname; - dev->function.descriptors = fs_printer_function; - dev->function.hs_descriptors = hs_printer_function; dev->function.bind = printer_func_bind; dev->function.setup = printer_func_setup; dev->function.unbind = printer_func_unbind; diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index 8efbf08c356..d0f37484b6b 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -29,6 +29,7 @@ #include <linux/list.h> #include <linux/interrupt.h> #include <linux/mm.h> +#include <linux/platform_data/pxa2xx_udc.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/irq.h> @@ -59,9 +60,6 @@ #include <mach/lubbock.h> #endif -#include <asm/mach/udc_pxa2xx.h> - - /* * This driver handles the USB Device Controller (UDC) in Intel's PXA 25x * series processors. The UDC for the IXP 4xx series is very similar. @@ -998,9 +996,10 @@ static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA) return -EOPNOTSUPP; } -static int pxa25x_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); -static int pxa25x_stop(struct usb_gadget_driver *driver); +static int pxa25x_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver); +static int pxa25x_udc_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver); static const struct usb_gadget_ops pxa25x_udc_ops = { .get_frame = pxa25x_udc_get_frame, @@ -1008,8 +1007,8 @@ static const struct usb_gadget_ops pxa25x_udc_ops = { .vbus_session = pxa25x_udc_vbus_session, .pullup = pxa25x_udc_pullup, .vbus_draw = pxa25x_udc_vbus_draw, - .start = pxa25x_start, - .stop = pxa25x_stop, + .udc_start = pxa25x_udc_start, + .udc_stop = pxa25x_udc_stop, }; /*-------------------------------------------------------------------------*/ @@ -1256,58 +1255,26 @@ static void udc_enable (struct pxa25x_udc *dev) * disconnect is reported. then a host may connect again, or * the driver might get unbound. */ -static int pxa25x_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) +static int pxa25x_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) { - struct pxa25x_udc *dev = the_controller; + struct pxa25x_udc *dev = to_pxa25x(g); int retval; - if (!driver - || driver->max_speed < USB_SPEED_FULL - || !bind - || !driver->disconnect - || !driver->setup) - return -EINVAL; - if (!dev) - return -ENODEV; - if (dev->driver) - return -EBUSY; - /* first hook up the driver ... */ dev->driver = driver; dev->gadget.dev.driver = &driver->driver; dev->pullup = 1; - retval = device_add (&dev->gadget.dev); - if (retval) { -fail: - dev->driver = NULL; - dev->gadget.dev.driver = NULL; - return retval; - } - retval = bind(&dev->gadget, driver); - if (retval) { - DMSG("bind to driver %s --> error %d\n", - driver->driver.name, retval); - device_del (&dev->gadget.dev); - goto fail; - } - /* ... then enable host detection and ep0; and we're ready * for set_configuration as well as eventual disconnect. */ - DMSG("registered gadget driver '%s'\n", driver->driver.name); - /* connect to bus through transceiver */ if (!IS_ERR_OR_NULL(dev->transceiver)) { retval = otg_set_peripheral(dev->transceiver->otg, &dev->gadget); - if (retval) { - DMSG("can't bind to transceiver\n"); - if (driver->unbind) - driver->unbind(&dev->gadget); + if (retval) goto bind_fail; - } } pullup(dev); @@ -1344,14 +1311,10 @@ stop_activity(struct pxa25x_udc *dev, struct usb_gadget_driver *driver) udc_reinit(dev); } -static int pxa25x_stop(struct usb_gadget_driver *driver) +static int pxa25x_udc_stop(struct usb_gadget*g, + struct usb_gadget_driver *driver) { - struct pxa25x_udc *dev = the_controller; - - if (!dev) - return -ENODEV; - if (!driver || driver != dev->driver || !driver->unbind) - return -EINVAL; + struct pxa25x_udc *dev = to_pxa25x(g); local_irq_disable(); dev->pullup = 0; @@ -1362,14 +1325,11 @@ static int pxa25x_stop(struct usb_gadget_driver *driver) if (!IS_ERR_OR_NULL(dev->transceiver)) (void) otg_set_peripheral(dev->transceiver->otg, NULL); - driver->unbind(&dev->gadget); dev->gadget.dev.driver = NULL; dev->driver = NULL; - device_del (&dev->gadget.dev); - - DMSG("unregistered gadget driver '%s'\n", driver->driver.name); dump_state(dev); + return 0; } @@ -2102,6 +2062,8 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev) int retval, irq; u32 chiprev; + pr_info("%s: version %s\n", driver_name, DRIVER_VERSION); + /* insist on Intel/ARM/XScale */ asm("mrc%? p15, 0, %0, c0, c0" : "=r" (chiprev)); if ((chiprev & CP15R0_VENDOR_MASK) != CP15R0_XSCALE_VALUE) { @@ -2180,6 +2142,13 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev) dev->gadget.dev.parent = &pdev->dev; dev->gadget.dev.dma_mask = pdev->dev.dma_mask; + retval = device_add(&dev->gadget.dev); + if (retval) { + dev->driver = NULL; + dev->gadget.dev.driver = NULL; + goto err_device_add; + } + the_controller = dev; platform_set_drvdata(pdev, dev); @@ -2230,6 +2199,8 @@ lubbock_fail0: free_irq(irq, dev); #endif err_irq1: + device_unregister(&dev->gadget.dev); + err_device_add: if (gpio_is_valid(dev->mach->gpio_pullup)) gpio_free(dev->mach->gpio_pullup); err_gpio_pullup: @@ -2251,10 +2222,11 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev) { struct pxa25x_udc *dev = platform_get_drvdata(pdev); - usb_del_gadget_udc(&dev->gadget); if (dev->driver) return -EBUSY; + usb_del_gadget_udc(&dev->gadget); + device_unregister(&dev->gadget.dev); dev->pullup = 0; pullup(dev); @@ -2348,18 +2320,7 @@ static struct platform_driver udc_driver = { }, }; -static int __init udc_init(void) -{ - pr_info("%s: version %s\n", driver_name, DRIVER_VERSION); - return platform_driver_probe(&udc_driver, pxa25x_udc_probe); -} -module_init(udc_init); - -static void __exit udc_exit(void) -{ - platform_driver_unregister(&udc_driver); -} -module_exit(udc_exit); +module_platform_driver_probe(udc_driver, pxa25x_udc_probe); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell"); diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h index 2eca1e71fec..3fe5931dc21 100644 --- a/drivers/usb/gadget/pxa25x_udc.h +++ b/drivers/usb/gadget/pxa25x_udc.h @@ -126,6 +126,7 @@ struct pxa25x_udc { struct dentry *debugfs_udc; #endif }; +#define to_pxa25x(g) (container_of((g), struct pxa25x_udc, gadget)) /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 2b3b01d5f40..2fc867652ef 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -1671,9 +1671,10 @@ static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA) return -EOPNOTSUPP; } -static int pxa27x_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); -static int pxa27x_udc_stop(struct usb_gadget_driver *driver); +static int pxa27x_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver); +static int pxa27x_udc_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver); static const struct usb_gadget_ops pxa_udc_ops = { .get_frame = pxa_udc_get_frame, @@ -1681,8 +1682,8 @@ static const struct usb_gadget_ops pxa_udc_ops = { .pullup = pxa_udc_pullup, .vbus_session = pxa_udc_vbus_session, .vbus_draw = pxa_udc_vbus_draw, - .start = pxa27x_udc_start, - .stop = pxa27x_udc_stop, + .udc_start = pxa27x_udc_start, + .udc_stop = pxa27x_udc_stop, }; /** @@ -1802,45 +1803,23 @@ static void udc_enable(struct pxa_udc *udc) * * Returns 0 if no error, -EINVAL, -ENODEV, -EBUSY otherwise */ -static int pxa27x_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) +static int pxa27x_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) { - struct pxa_udc *udc = the_controller; + struct pxa_udc *udc = to_pxa(g); int retval; - if (!driver || driver->max_speed < USB_SPEED_FULL || !bind - || !driver->disconnect || !driver->setup) - return -EINVAL; - if (!udc) - return -ENODEV; - if (udc->driver) - return -EBUSY; - /* first hook up the driver ... */ udc->driver = driver; udc->gadget.dev.driver = &driver->driver; dplus_pullup(udc, 1); - retval = device_add(&udc->gadget.dev); - if (retval) { - dev_err(udc->dev, "device_add error %d\n", retval); - goto add_fail; - } - retval = bind(&udc->gadget, driver); - if (retval) { - dev_err(udc->dev, "bind to driver %s --> error %d\n", - driver->driver.name, retval); - goto bind_fail; - } - dev_dbg(udc->dev, "registered gadget driver '%s'\n", - driver->driver.name); - if (!IS_ERR_OR_NULL(udc->transceiver)) { retval = otg_set_peripheral(udc->transceiver->otg, &udc->gadget); if (retval) { dev_err(udc->dev, "can't bind to transceiver\n"); - goto transceiver_fail; + goto fail; } } @@ -1848,12 +1827,7 @@ static int pxa27x_udc_start(struct usb_gadget_driver *driver, udc_enable(udc); return 0; -transceiver_fail: - if (driver->unbind) - driver->unbind(&udc->gadget); -bind_fail: - device_del(&udc->gadget.dev); -add_fail: +fail: udc->driver = NULL; udc->gadget.dev.driver = NULL; return retval; @@ -1878,9 +1852,6 @@ static void stop_activity(struct pxa_udc *udc, struct usb_gadget_driver *driver) for (i = 0; i < NR_USB_ENDPOINTS; i++) pxa_ep_disable(&udc->udc_usb_ep[i].usb_ep); - - if (driver) - driver->disconnect(&udc->gadget); } /** @@ -1889,25 +1860,17 @@ static void stop_activity(struct pxa_udc *udc, struct usb_gadget_driver *driver) * * Returns 0 if no error, -ENODEV, -EINVAL otherwise */ -static int pxa27x_udc_stop(struct usb_gadget_driver *driver) +static int pxa27x_udc_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver) { - struct pxa_udc *udc = the_controller; - - if (!udc) - return -ENODEV; - if (!driver || driver != udc->driver || !driver->unbind) - return -EINVAL; + struct pxa_udc *udc = to_pxa(g); stop_activity(udc, driver); udc_disable(udc); dplus_pullup(udc, 0); - driver->unbind(&udc->gadget); udc->driver = NULL; - device_del(&udc->gadget.dev); - dev_info(udc->dev, "unregistered gadget driver '%s'\n", - driver->driver.name); if (!IS_ERR_OR_NULL(udc->transceiver)) return otg_set_peripheral(udc->transceiver->otg, NULL); @@ -2511,13 +2474,24 @@ static int __init pxa_udc_probe(struct platform_device *pdev) driver_name, udc->irq, retval); goto err_irq; } + + retval = device_add(&udc->gadget.dev); + if (retval) { + dev_err(udc->dev, "device_add error %d\n", retval); + goto err_dev_add; + } + retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget); if (retval) goto err_add_udc; pxa_init_debugfs(udc); + return 0; + err_add_udc: + device_unregister(&udc->gadget.dev); +err_dev_add: free_irq(udc->irq, udc); err_irq: iounmap(udc->regs); @@ -2538,6 +2512,7 @@ static int __exit pxa_udc_remove(struct platform_device *_dev) int gpio = udc->mach->gpio_pullup; usb_del_gadget_udc(&udc->gadget); + device_del(&udc->gadget.dev); usb_gadget_unregister_driver(udc->driver); free_irq(udc->irq, udc); pxa_cleanup_debugfs(udc); diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h index a1d268c6f2c..28f2b53530f 100644 --- a/drivers/usb/gadget/pxa27x_udc.h +++ b/drivers/usb/gadget/pxa27x_udc.h @@ -418,7 +418,7 @@ struct udc_stats { * @irq: udc irq * @clk: udc clock * @usb_gadget: udc gadget structure - * @driver: bound gadget (zero, g_ether, g_file_storage, ...) + * @driver: bound gadget (zero, g_ether, g_mass_storage, ...) * @dev: device * @mach: machine info, used to activate specific GPIO * @transceiver: external transceiver to handle vbus sense and D+ pullup @@ -473,6 +473,7 @@ struct pxa_udc { struct dentry *debugfs_eps; #endif }; +#define to_pxa(g) (container_of((g), struct pxa_udc, gadget)) static inline struct pxa_udc *to_gadget_udc(struct usb_gadget *gadget) { diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index 5a80751accb..f46a1b77ce3 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -1812,7 +1812,7 @@ static int r8a66597_set_selfpowered(struct usb_gadget *gadget, int is_self) return 0; } -static struct usb_gadget_ops r8a66597_gadget_ops = { +static const struct usb_gadget_ops r8a66597_gadget_ops = { .get_frame = r8a66597_get_frame, .udc_start = r8a66597_start, .udc_stop = r8a66597_stop, @@ -2031,21 +2031,10 @@ static struct platform_driver r8a66597_driver = { .name = (char *) udc_name, }, }; -MODULE_ALIAS("platform:r8a66597_udc"); - -static int __init r8a66597_udc_init(void) -{ - return platform_driver_probe(&r8a66597_driver, r8a66597_probe); -} -module_init(r8a66597_udc_init); -static void __exit r8a66597_udc_cleanup(void) -{ - platform_driver_unregister(&r8a66597_driver); -} -module_exit(r8a66597_udc_cleanup); +module_platform_driver_probe(r8a66597_driver, r8a66597_probe); MODULE_DESCRIPTION("R8A66597 USB gadget driver"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Yoshihiro Shimoda"); - +MODULE_ALIAS("platform:r8a66597_udc"); diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c index e4192b887de..d9297eebbf7 100644 --- a/drivers/usb/gadget/rndis.c +++ b/drivers/usb/gadget/rndis.c @@ -1065,7 +1065,7 @@ static int rndis_proc_show(struct seq_file *m, void *v) static ssize_t rndis_proc_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos) { - rndis_params *p = PDE(file->f_path.dentry->d_inode)->data; + rndis_params *p = PDE(file_inode(file))->data; u32 speed = 0; int i, fl_speed = 0; diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 6f696ee8b81..c26564f29a2 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -32,6 +32,7 @@ #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +#include <linux/usb/phy.h> #include <linux/platform_data/s3c-hsotg.h> #include <mach/map.h> @@ -133,7 +134,9 @@ struct s3c_hsotg_ep { * struct s3c_hsotg - driver state. * @dev: The parent device supplied to the probe function * @driver: USB gadget driver - * @plat: The platform specific configuration data. + * @phy: The otg phy transceiver structure for phy control. + * @plat: The platform specific configuration data. This can be removed once + * all SoCs support usb transceiver. * @regs: The memory area mapped for accessing registers. * @irq: The IRQ number we are using * @supplies: Definition of USB power supplies @@ -153,6 +156,7 @@ struct s3c_hsotg_ep { struct s3c_hsotg { struct device *dev; struct usb_gadget_driver *driver; + struct usb_phy *phy; struct s3c_hsotg_plat *plat; spinlock_t lock; @@ -2854,7 +2858,10 @@ static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg) struct platform_device *pdev = to_platform_device(hsotg->dev); dev_dbg(hsotg->dev, "pdev 0x%p\n", pdev); - if (hsotg->plat->phy_init) + + if (hsotg->phy) + usb_phy_init(hsotg->phy); + else if (hsotg->plat->phy_init) hsotg->plat->phy_init(pdev, hsotg->plat->phy_type); } @@ -2869,7 +2876,9 @@ static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg) { struct platform_device *pdev = to_platform_device(hsotg->dev); - if (hsotg->plat->phy_exit) + if (hsotg->phy) + usb_phy_shutdown(hsotg->phy); + else if (hsotg->plat->phy_exit) hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type); } @@ -3055,7 +3064,7 @@ static int s3c_hsotg_pullup(struct usb_gadget *gadget, int is_on) return 0; } -static struct usb_gadget_ops s3c_hsotg_gadget_ops = { +static const struct usb_gadget_ops s3c_hsotg_gadget_ops = { .get_frame = s3c_hsotg_gadget_getframe, .udc_start = s3c_hsotg_udc_start, .udc_stop = s3c_hsotg_udc_stop, @@ -3072,7 +3081,7 @@ static struct usb_gadget_ops s3c_hsotg_gadget_ops = { * creation) to give to the gadget driver. Setup the endpoint name, any * direction information and other state that may be required. */ -static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg, +static void s3c_hsotg_initep(struct s3c_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, int epnum) { @@ -3414,7 +3423,7 @@ static const struct file_operations ep_fops = { * with the same name as the device itself, in case we end up * with multiple blocks in future systems. */ -static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg) +static void s3c_hsotg_create_debug(struct s3c_hsotg *hsotg) { struct dentry *root; unsigned epidx; @@ -3460,7 +3469,7 @@ static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg) * * Cleanup (remove) the debugfs files for use on module exit. */ -static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg) +static void s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg) { unsigned epidx; @@ -3477,12 +3486,11 @@ static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg) /** * s3c_hsotg_release - release callback for hsotg device * @dev: Device to for which release is called + * + * Nothing to do as the resource is allocated using devm_ API. */ static void s3c_hsotg_release(struct device *dev) { - struct s3c_hsotg *hsotg = dev_get_drvdata(dev); - - kfree(hsotg); } /** @@ -3490,9 +3498,10 @@ static void s3c_hsotg_release(struct device *dev) * @pdev: The platform information for the driver */ -static int __devinit s3c_hsotg_probe(struct platform_device *pdev) +static int s3c_hsotg_probe(struct platform_device *pdev) { struct s3c_hsotg_plat *plat = pdev->dev.platform_data; + struct usb_phy *phy; struct device *dev = &pdev->dev; struct s3c_hsotg_ep *eps; struct s3c_hsotg *hsotg; @@ -3501,20 +3510,27 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) int ret; int i; - plat = pdev->dev.platform_data; - if (!plat) { - dev_err(&pdev->dev, "no platform data defined\n"); - return -EINVAL; - } - hsotg = devm_kzalloc(&pdev->dev, sizeof(struct s3c_hsotg), GFP_KERNEL); if (!hsotg) { dev_err(dev, "cannot get memory\n"); return -ENOMEM; } + phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(phy)) { + /* Fallback for pdata */ + plat = pdev->dev.platform_data; + if (!plat) { + dev_err(&pdev->dev, "no platform data or transceiver defined\n"); + return -EPROBE_DEFER; + } else { + hsotg->plat = plat; + } + } else { + hsotg->phy = phy; + } + hsotg->dev = dev; - hsotg->plat = plat; hsotg->clk = devm_clk_get(&pdev->dev, "otg"); if (IS_ERR(hsotg->clk)) { @@ -3526,10 +3542,9 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - hsotg->regs = devm_request_and_ioremap(&pdev->dev, res); - if (!hsotg->regs) { - dev_err(dev, "cannot map registers\n"); - ret = -ENXIO; + hsotg->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hsotg->regs)) { + ret = PTR_ERR(hsotg->regs); goto err_clk; } @@ -3573,7 +3588,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++) hsotg->supplies[i].supply = s3c_hsotg_supply_names[i]; - ret = regulator_bulk_get(dev, ARRAY_SIZE(hsotg->supplies), + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(hsotg->supplies), hsotg->supplies); if (ret) { dev_err(dev, "failed to request supplies: %d\n", ret); @@ -3663,8 +3678,6 @@ err_ep_mem: kfree(eps); err_supplies: s3c_hsotg_phy_disable(hsotg); - regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); - err_clk: clk_disable_unprepare(hsotg->clk); @@ -3675,7 +3688,7 @@ err_clk: * s3c_hsotg_remove - remove function for hsotg driver * @pdev: The platform information for the driver */ -static int __devexit s3c_hsotg_remove(struct platform_device *pdev) +static int s3c_hsotg_remove(struct platform_device *pdev) { struct s3c_hsotg *hsotg = platform_get_drvdata(pdev); @@ -3689,7 +3702,6 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev) } s3c_hsotg_phy_disable(hsotg); - regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); clk_disable_unprepare(hsotg->clk); @@ -3708,7 +3720,7 @@ static struct platform_driver s3c_hsotg_driver = { .owner = THIS_MODULE, }, .probe = s3c_hsotg_probe, - .remove = __devexit_p(s3c_hsotg_remove), + .remove = s3c_hsotg_remove, .suspend = s3c_hsotg_suspend, .resume = s3c_hsotg_resume, }; diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index d8e785d4ad5..458965a1b13 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -435,7 +435,7 @@ static void s3c_hsudc_epin_intr(struct s3c_hsudc *hsudc, u32 ep_idx) struct s3c_hsudc_req *hsreq; u32 csr; - csr = readl((u32)hsudc->regs + S3C_ESR); + csr = readl(hsudc->regs + S3C_ESR); if (csr & S3C_ESR_STALL) { writel(S3C_ESR_STALL, hsudc->regs + S3C_ESR); return; @@ -468,7 +468,7 @@ static void s3c_hsudc_epout_intr(struct s3c_hsudc *hsudc, u32 ep_idx) struct s3c_hsudc_req *hsreq; u32 csr; - csr = readl((u32)hsudc->regs + S3C_ESR); + csr = readl(hsudc->regs + S3C_ESR); if (csr & S3C_ESR_STALL) { writel(S3C_ESR_STALL, hsudc->regs + S3C_ESR); return; @@ -901,12 +901,12 @@ static int s3c_hsudc_queue(struct usb_ep *_ep, struct usb_request *_req, if (list_empty(&hsep->queue) && !hsep->stopped) { offset = (ep_index(hsep)) ? S3C_ESR : S3C_EP0SR; if (ep_is_in(hsep)) { - csr = readl((u32)hsudc->regs + offset); + csr = readl(hsudc->regs + offset); if (!(csr & S3C_ESR_TX_SUCCESS) && (s3c_hsudc_write_fifo(hsep, hsreq) == 1)) hsreq = NULL; } else { - csr = readl((u32)hsudc->regs + offset); + csr = readl(hsudc->regs + offset); if ((csr & S3C_ESR_RX_SUCCESS) && (s3c_hsudc_read_fifo(hsep, hsreq) == 1)) hsreq = NULL; @@ -1254,14 +1254,14 @@ static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA) return -EOPNOTSUPP; } -static struct usb_gadget_ops s3c_hsudc_gadget_ops = { +static const struct usb_gadget_ops s3c_hsudc_gadget_ops = { .get_frame = s3c_hsudc_gadget_getframe, .udc_start = s3c_hsudc_start, .udc_stop = s3c_hsudc_stop, .vbus_draw = s3c_hsudc_vbus_draw, }; -static int __devinit s3c_hsudc_probe(struct platform_device *pdev) +static int s3c_hsudc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct resource *res; @@ -1286,7 +1286,7 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev) for (i = 0; i < ARRAY_SIZE(hsudc->supplies); i++) hsudc->supplies[i].supply = s3c_hsudc_supply_names[i]; - ret = regulator_bulk_get(dev, ARRAY_SIZE(hsudc->supplies), + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(hsudc->supplies), hsudc->supplies); if (ret != 0) { dev_err(dev, "failed to request supplies: %d\n", ret); @@ -1295,10 +1295,9 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - hsudc->regs = devm_request_and_ioremap(&pdev->dev, res); - if (!hsudc->regs) { - dev_err(dev, "error mapping device register area\n"); - ret = -EBUSY; + hsudc->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hsudc->regs)) { + ret = PTR_ERR(hsudc->regs); goto err_res; } @@ -1367,7 +1366,6 @@ err_res: if (!IS_ERR_OR_NULL(hsudc->transceiver)) usb_put_phy(hsudc->transceiver); - regulator_bulk_free(ARRAY_SIZE(hsudc->supplies), hsudc->supplies); err_supplies: return ret; } diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index a2fa6e16d01..08f89652533 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -1538,9 +1538,10 @@ static int s3c2410_vbus_draw(struct usb_gadget *_gadget, unsigned ma) return -ENOTSUPP; } -static int s3c2410_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)); -static int s3c2410_udc_stop(struct usb_gadget_driver *driver); +static int s3c2410_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver); +static int s3c2410_udc_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver); static const struct usb_gadget_ops s3c2410_ops = { .get_frame = s3c2410_udc_get_frame, @@ -1549,8 +1550,8 @@ static const struct usb_gadget_ops s3c2410_ops = { .pullup = s3c2410_udc_pullup, .vbus_session = s3c2410_udc_vbus_session, .vbus_draw = s3c2410_vbus_draw, - .start = s3c2410_udc_start, - .stop = s3c2410_udc_stop, + .udc_start = s3c2410_udc_start, + .udc_stop = s3c2410_udc_stop, }; static void s3c2410_udc_command(enum s3c2410_udc_cmd_e cmd) @@ -1664,84 +1665,28 @@ static void s3c2410_udc_enable(struct s3c2410_udc *dev) s3c2410_udc_command(S3C2410_UDC_P_ENABLE); } -static int s3c2410_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) +static int s3c2410_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) { - struct s3c2410_udc *udc = the_controller; - int retval; + struct s3c2410_udc *udc = to_s3c2410(g); dprintk(DEBUG_NORMAL, "%s() '%s'\n", __func__, driver->driver.name); - /* Sanity checks */ - if (!udc) - return -ENODEV; - - if (udc->driver) - return -EBUSY; - - if (!bind || !driver->setup || driver->max_speed < USB_SPEED_FULL) { - dev_err(&udc->gadget.dev, "Invalid driver: bind %p setup %p speed %d\n", - bind, driver->setup, driver->max_speed); - return -EINVAL; - } -#if defined(MODULE) - if (!driver->unbind) { - dev_err(&udc->gadget.dev, "Invalid driver: no unbind method\n"); - return -EINVAL; - } -#endif - /* Hook the driver */ udc->driver = driver; udc->gadget.dev.driver = &driver->driver; - /* Bind the driver */ - retval = device_add(&udc->gadget.dev); - if (retval) { - dev_err(&udc->gadget.dev, "Error in device_add() : %d\n", retval); - goto register_error; - } - - dprintk(DEBUG_NORMAL, "binding gadget driver '%s'\n", - driver->driver.name); - - retval = bind(&udc->gadget, driver); - if (retval) { - device_del(&udc->gadget.dev); - goto register_error; - } - /* Enable udc */ s3c2410_udc_enable(udc); return 0; - -register_error: - udc->driver = NULL; - udc->gadget.dev.driver = NULL; - return retval; } -static int s3c2410_udc_stop(struct usb_gadget_driver *driver) +static int s3c2410_udc_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver) { - struct s3c2410_udc *udc = the_controller; - - if (!udc) - return -ENODEV; - - if (!driver || driver != udc->driver || !driver->unbind) - return -EINVAL; - - dprintk(DEBUG_NORMAL, "usb_gadget_unregister_driver() '%s'\n", - driver->driver.name); - - /* report disconnect */ - if (driver->disconnect) - driver->disconnect(&udc->gadget); + struct s3c2410_udc *udc = to_s3c2410(g); - driver->unbind(&udc->gadget); - - device_del(&udc->gadget.dev); udc->driver = NULL; /* Disable udc */ @@ -1883,6 +1828,13 @@ static int s3c2410_udc_probe(struct platform_device *pdev) udc->gadget.dev.parent = &pdev->dev; udc->gadget.dev.dma_mask = pdev->dev.dma_mask; + /* Bind the driver */ + retval = device_add(&udc->gadget.dev); + if (retval) { + dev_err(&udc->gadget.dev, "Error in device_add() : %d\n", retval); + goto err_device_add; + } + the_controller = udc; platform_set_drvdata(pdev, udc); @@ -1971,6 +1923,8 @@ err_gpio_claim: err_int: free_irq(IRQ_USBD, udc); err_map: + device_unregister(&udc->gadget.dev); +err_device_add: iounmap(base_addr); err_mem: release_mem_region(rsrc_start, rsrc_len); @@ -1988,10 +1942,11 @@ static int s3c2410_udc_remove(struct platform_device *pdev) dev_dbg(&pdev->dev, "%s()\n", __func__); - usb_del_gadget_udc(&udc->gadget); if (udc->driver) return -EBUSY; + usb_del_gadget_udc(&udc->gadget); + device_unregister(&udc->gadget.dev); debugfs_remove(udc->regs_info); if (udc_info && !udc_info->udc_command && diff --git a/drivers/usb/gadget/s3c2410_udc.h b/drivers/usb/gadget/s3c2410_udc.h index 3e80fd5c820..93bf225f196 100644 --- a/drivers/usb/gadget/s3c2410_udc.h +++ b/drivers/usb/gadget/s3c2410_udc.h @@ -95,5 +95,6 @@ struct s3c2410_udc { u8 vbus; struct dentry *regs_info; }; +#define to_s3c2410(g) (container_of((g), struct s3c2410_udc, gadget)) #endif diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index 44752f531e8..68d7bb06ebc 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -36,10 +36,8 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ -#include "f_acm.c" #include "f_obex.c" #include "f_serial.c" -#include "u_serial.c" /*-------------------------------------------------------------------------*/ USB_GADGET_COMPOSITE_OPTIONS(); @@ -128,20 +126,25 @@ module_param(n_ports, uint, 0); MODULE_PARM_DESC(n_ports, "number of ports to create, default=1"); /*-------------------------------------------------------------------------*/ +static unsigned char tty_lines[MAX_U_SERIAL_PORTS]; -static int __init serial_bind_config(struct usb_configuration *c) +static int __init serial_bind_obex_config(struct usb_configuration *c) { unsigned i; int status = 0; - for (i = 0; i < n_ports && status == 0; i++) { - if (use_acm) - status = acm_bind_config(c, i); - else if (use_obex) - status = obex_bind_config(c, i); - else - status = gser_bind_config(c, i); - } + for (i = 0; i < n_ports && status == 0; i++) + status = obex_bind_config(c, tty_lines[i]); + return status; +} + +static int __init serial_bind_gser_config(struct usb_configuration *c) +{ + unsigned i; + int status = 0; + + for (i = 0; i < n_ports && status == 0; i++) + status = gser_bind_config(c, tty_lines[i]); return status; } @@ -152,13 +155,70 @@ static struct usb_configuration serial_config_driver = { .bmAttributes = USB_CONFIG_ATT_SELFPOWER, }; +static struct usb_function_instance *fi_serial[MAX_U_SERIAL_PORTS]; +static struct usb_function *f_serial[MAX_U_SERIAL_PORTS]; + +static int serial_register_ports(struct usb_composite_dev *cdev, + struct usb_configuration *c, const char *f_name) +{ + int i; + int ret; + + ret = usb_add_config_only(cdev, c); + if (ret) + goto out; + + for (i = 0; i < n_ports; i++) { + struct f_serial_opts *opts; + + fi_serial[i] = usb_get_function_instance(f_name); + if (IS_ERR(fi_serial[i])) { + ret = PTR_ERR(fi_serial[i]); + goto fail; + } + opts = container_of(fi_serial[i], struct f_serial_opts, func_inst); + opts->port_num = tty_lines[i]; + + f_serial[i] = usb_get_function(fi_serial[i]); + if (IS_ERR(f_serial[i])) { + ret = PTR_ERR(f_serial[i]); + goto err_get_func; + } + + ret = usb_add_function(c, f_serial[i]); + if (ret) + goto err_add_func; + } + + return 0; + +err_add_func: + usb_put_function(f_serial[i]); +err_get_func: + usb_put_function_instance(fi_serial[i]); + +fail: + i--; + while (i >= 0) { + usb_remove_function(c, f_serial[i]); + usb_put_function(f_serial[i]); + usb_put_function_instance(fi_serial[i]); + i--; + } +out: + return ret; +} + static int __init gs_bind(struct usb_composite_dev *cdev) { int status; + int cur_line; - status = gserial_setup(cdev->gadget, n_ports); - if (status < 0) - return status; + for (cur_line = 0; cur_line < n_ports; cur_line++) { + status = gserial_alloc_line(&tty_lines[cur_line]); + if (status) + goto fail; + } /* Allocate string descriptor numbers ... note that string * contents can be overridden by the composite_dev glue. @@ -178,8 +238,16 @@ static int __init gs_bind(struct usb_composite_dev *cdev) } /* register our configuration */ - status = usb_add_config(cdev, &serial_config_driver, - serial_bind_config); + if (use_acm) { + status = serial_register_ports(cdev, &serial_config_driver, + "acm"); + usb_ep_autoconfig_reset(cdev->gadget); + } else if (use_obex) + status = usb_add_config(cdev, &serial_config_driver, + serial_bind_obex_config); + else + status = usb_add_config(cdev, &serial_config_driver, + serial_bind_gser_config); if (status < 0) goto fail; @@ -189,16 +257,31 @@ static int __init gs_bind(struct usb_composite_dev *cdev) return 0; fail: - gserial_cleanup(); + cur_line--; + while (cur_line >= 0) + gserial_free_line(tty_lines[cur_line--]); return status; } +static int gs_unbind(struct usb_composite_dev *cdev) +{ + int i; + + for (i = 0; i < n_ports; i++) { + usb_put_function(f_serial[i]); + usb_put_function_instance(fi_serial[i]); + gserial_free_line(tty_lines[i]); + } + return 0; +} + static __refdata struct usb_composite_driver gserial_driver = { .name = "g_serial", .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_SUPER, .bind = gs_bind, + .unbind = gs_unbind, }; static int __init init(void) @@ -234,6 +317,5 @@ module_init(init); static void __exit cleanup(void) { usb_composite_unregister(&gserial_driver); - gserial_cleanup(); } module_exit(cleanup); diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c index 8d9bcd8207c..dbce3a9074e 100644 --- a/drivers/usb/gadget/storage_common.c +++ b/drivers/usb/gadget/storage_common.c @@ -11,30 +11,10 @@ * (at your option) any later version. */ - /* * This file requires the following identifiers used in USB strings to * be defined (each of type pointer to char): - * - fsg_string_manufacturer -- name of the manufacturer - * - fsg_string_product -- name of the product - * - fsg_string_config -- name of the configuration * - fsg_string_interface -- name of the interface - * The first four are only needed when FSG_DESCRIPTORS_DEVICE_STRINGS - * macro is defined prior to including this file. - */ - -/* - * When FSG_NO_INTR_EP is defined fsg_fs_intr_in_desc and - * fsg_hs_intr_in_desc objects as well as - * FSG_FS_FUNCTION_PRE_EP_ENTRIES and FSG_HS_FUNCTION_PRE_EP_ENTRIES - * macros are not defined. - * - * When FSG_NO_DEVICE_STRINGS is defined FSG_STRING_MANUFACTURER, - * FSG_STRING_PRODUCT, FSG_STRING_SERIAL and FSG_STRING_CONFIG are not - * defined (as well as corresponding entries in string tables are - * missing) and FSG_STRING_INTERFACE has value of zero. - * - * When FSG_NO_OTG is defined fsg_otg_desc won't be defined. */ /* @@ -78,34 +58,6 @@ #define LWARN(lun, fmt, args...) dev_warn(&(lun)->dev, fmt, ## args) #define LINFO(lun, fmt, args...) dev_info(&(lun)->dev, fmt, ## args) -/* - * Keep those macros in sync with those in - * include/linux/usb/composite.h or else GCC will complain. If they - * are identical (the same names of arguments, white spaces in the - * same places) GCC will allow redefinition otherwise (even if some - * white space is removed or added) warning will be issued. - * - * Those macros are needed here because File Storage Gadget does not - * include the composite.h header. For composite gadgets those macros - * are redundant since composite.h is included any way. - * - * One could check whether those macros are already defined (which - * would indicate composite.h had been included) or not (which would - * indicate we were in FSG) but this is not done because a warning is - * desired if definitions here differ from the ones in composite.h. - * - * We want the definitions to match and be the same in File Storage - * Gadget as well as Mass Storage Function (and so composite gadgets - * using MSF). If someone changes them in composite.h it will produce - * a warning in this file when building MSF. - */ -#define DBG(d, fmt, args...) dev_dbg(&(d)->gadget->dev , fmt , ## args) -#define VDBG(d, fmt, args...) dev_vdbg(&(d)->gadget->dev , fmt , ## args) -#define ERROR(d, fmt, args...) dev_err(&(d)->gadget->dev , fmt , ## args) -#define WARNING(d, fmt, args...) dev_warn(&(d)->gadget->dev , fmt , ## args) -#define INFO(d, fmt, args...) dev_info(&(d)->gadget->dev , fmt , ## args) - - #ifdef DUMP_MSGS @@ -141,18 +93,6 @@ /*-------------------------------------------------------------------------*/ -/* CBI Interrupt data structure */ -struct interrupt_data { - u8 bType; - u8 bValue; -}; - -#define CBI_INTERRUPT_DATA_LEN 2 - -/* CBI Accept Device-Specific Command request */ -#define USB_CBI_ADSC_REQUEST 0x00 - - /* Length of a SCSI Command Data Block */ #define MAX_COMMAND_SIZE 16 @@ -203,9 +143,12 @@ struct fsg_lun { struct device dev; }; -#define fsg_lun_is_open(curlun) ((curlun)->filp != NULL) +static inline bool fsg_lun_is_open(struct fsg_lun *curlun) +{ + return curlun->filp != NULL; +} -static struct fsg_lun *fsg_lun_from_dev(struct device *dev) +static inline struct fsg_lun *fsg_lun_from_dev(struct device *dev) { return container_of(dev, struct fsg_lun, dev); } @@ -308,26 +251,10 @@ static inline u32 get_unaligned_be24(u8 *buf) enum { -#ifndef FSG_NO_DEVICE_STRINGS - FSG_STRING_MANUFACTURER = 1, - FSG_STRING_PRODUCT, - FSG_STRING_SERIAL, - FSG_STRING_CONFIG, -#endif FSG_STRING_INTERFACE }; -#ifndef FSG_NO_OTG -static struct usb_otg_descriptor -fsg_otg_desc = { - .bLength = sizeof fsg_otg_desc, - .bDescriptorType = USB_DT_OTG, - - .bmAttributes = USB_OTG_SRP, -}; -#endif - /* There is only one interface. */ static struct usb_interface_descriptor @@ -367,37 +294,10 @@ fsg_fs_bulk_out_desc = { /* wMaxPacketSize set by autoconfiguration */ }; -#ifndef FSG_NO_INTR_EP - -static struct usb_endpoint_descriptor -fsg_fs_intr_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = cpu_to_le16(2), - .bInterval = 32, /* frames -> 32 ms */ -}; - -#ifndef FSG_NO_OTG -# define FSG_FS_FUNCTION_PRE_EP_ENTRIES 2 -#else -# define FSG_FS_FUNCTION_PRE_EP_ENTRIES 1 -#endif - -#endif - static struct usb_descriptor_header *fsg_fs_function[] = { -#ifndef FSG_NO_OTG - (struct usb_descriptor_header *) &fsg_otg_desc, -#endif (struct usb_descriptor_header *) &fsg_intf_desc, (struct usb_descriptor_header *) &fsg_fs_bulk_in_desc, (struct usb_descriptor_header *) &fsg_fs_bulk_out_desc, -#ifndef FSG_NO_INTR_EP - (struct usb_descriptor_header *) &fsg_fs_intr_in_desc, -#endif NULL, }; @@ -431,37 +331,11 @@ fsg_hs_bulk_out_desc = { .bInterval = 1, /* NAK every 1 uframe */ }; -#ifndef FSG_NO_INTR_EP - -static struct usb_endpoint_descriptor -fsg_hs_intr_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - /* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */ - .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = cpu_to_le16(2), - .bInterval = 9, /* 2**(9-1) = 256 uframes -> 32 ms */ -}; - -#ifndef FSG_NO_OTG -# define FSG_HS_FUNCTION_PRE_EP_ENTRIES 2 -#else -# define FSG_HS_FUNCTION_PRE_EP_ENTRIES 1 -#endif - -#endif static struct usb_descriptor_header *fsg_hs_function[] = { -#ifndef FSG_NO_OTG - (struct usb_descriptor_header *) &fsg_otg_desc, -#endif (struct usb_descriptor_header *) &fsg_intf_desc, (struct usb_descriptor_header *) &fsg_hs_bulk_in_desc, (struct usb_descriptor_header *) &fsg_hs_bulk_out_desc, -#ifndef FSG_NO_INTR_EP - (struct usb_descriptor_header *) &fsg_hs_intr_in_desc, -#endif NULL, }; @@ -499,107 +373,17 @@ static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = { /*.bMaxBurst = DYNAMIC, */ }; -#ifndef FSG_NO_INTR_EP - -static struct usb_endpoint_descriptor -fsg_ss_intr_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - /* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */ - .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = cpu_to_le16(2), - .bInterval = 9, /* 2**(9-1) = 256 uframes -> 32 ms */ -}; - -static struct usb_ss_ep_comp_descriptor fsg_ss_intr_in_comp_desc = { - .bLength = sizeof(fsg_ss_bulk_in_comp_desc), - .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, - - .wBytesPerInterval = cpu_to_le16(2), -}; - -#ifndef FSG_NO_OTG -# define FSG_SS_FUNCTION_PRE_EP_ENTRIES 2 -#else -# define FSG_SS_FUNCTION_PRE_EP_ENTRIES 1 -#endif - -#endif - -static __maybe_unused struct usb_ext_cap_descriptor fsg_ext_cap_desc = { - .bLength = USB_DT_USB_EXT_CAP_SIZE, - .bDescriptorType = USB_DT_DEVICE_CAPABILITY, - .bDevCapabilityType = USB_CAP_TYPE_EXT, - - .bmAttributes = cpu_to_le32(USB_LPM_SUPPORT), -}; - -static __maybe_unused struct usb_ss_cap_descriptor fsg_ss_cap_desc = { - .bLength = USB_DT_USB_SS_CAP_SIZE, - .bDescriptorType = USB_DT_DEVICE_CAPABILITY, - .bDevCapabilityType = USB_SS_CAP_TYPE, - - /* .bmAttributes = LTM is not supported yet */ - - .wSpeedSupported = cpu_to_le16(USB_LOW_SPEED_OPERATION - | USB_FULL_SPEED_OPERATION - | USB_HIGH_SPEED_OPERATION - | USB_5GBPS_OPERATION), - .bFunctionalitySupport = USB_LOW_SPEED_OPERATION, - .bU1devExitLat = USB_DEFAULT_U1_DEV_EXIT_LAT, - .bU2DevExitLat = cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT), -}; - -static __maybe_unused struct usb_bos_descriptor fsg_bos_desc = { - .bLength = USB_DT_BOS_SIZE, - .bDescriptorType = USB_DT_BOS, - - .wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE - + USB_DT_USB_EXT_CAP_SIZE - + USB_DT_USB_SS_CAP_SIZE), - - .bNumDeviceCaps = 2, -}; - static struct usb_descriptor_header *fsg_ss_function[] = { -#ifndef FSG_NO_OTG - (struct usb_descriptor_header *) &fsg_otg_desc, -#endif (struct usb_descriptor_header *) &fsg_intf_desc, (struct usb_descriptor_header *) &fsg_ss_bulk_in_desc, (struct usb_descriptor_header *) &fsg_ss_bulk_in_comp_desc, (struct usb_descriptor_header *) &fsg_ss_bulk_out_desc, (struct usb_descriptor_header *) &fsg_ss_bulk_out_comp_desc, -#ifndef FSG_NO_INTR_EP - (struct usb_descriptor_header *) &fsg_ss_intr_in_desc, - (struct usb_descriptor_header *) &fsg_ss_intr_in_comp_desc, -#endif NULL, }; -/* Maxpacket and other transfer characteristics vary by speed. */ -static __maybe_unused struct usb_endpoint_descriptor * -fsg_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *fs, - struct usb_endpoint_descriptor *hs, - struct usb_endpoint_descriptor *ss) -{ - if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER) - return ss; - else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) - return hs; - return fs; -} - - /* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */ static struct usb_string fsg_strings[] = { -#ifndef FSG_NO_DEVICE_STRINGS - {FSG_STRING_MANUFACTURER, fsg_string_manufacturer}, - {FSG_STRING_PRODUCT, fsg_string_product}, - {FSG_STRING_SERIAL, ""}, - {FSG_STRING_CONFIG, fsg_string_config}, -#endif {FSG_STRING_INTERFACE, fsg_string_interface}, {} }; @@ -656,7 +440,7 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename) if (!(filp->f_mode & FMODE_WRITE)) ro = 1; - inode = filp->f_path.dentry->d_inode; + inode = file_inode(filp); if ((!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode))) { LINFO(curlun, "invalid file type: %s\n", filename); goto out; diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c index 97e68b38cfd..7cacd6ae818 100644 --- a/drivers/usb/gadget/tcm_usb_gadget.c +++ b/drivers/usb/gadget/tcm_usb_gadget.c @@ -1384,7 +1384,7 @@ static struct se_node_acl *usbg_alloc_fabric_acl(struct se_portal_group *se_tpg) nacl = kzalloc(sizeof(struct usbg_nacl), GFP_KERNEL); if (!nacl) { - printk(KERN_ERR "Unable to alocate struct usbg_nacl\n"); + printk(KERN_ERR "Unable to allocate struct usbg_nacl\n"); return NULL; } @@ -1794,9 +1794,10 @@ static int tcm_usbg_drop_nexus(struct usbg_tpg *tpg) tpg->tpg_nexus = NULL; kfree(tv_nexus); + ret = 0; out: mutex_unlock(&tpg->tpg_mutex); - return 0; + return ret; } static ssize_t tcm_usbg_tpg_store_nexus( @@ -2139,6 +2140,7 @@ static struct usb_descriptor_header *uasp_fs_function_desc[] = { (struct usb_descriptor_header *) &uasp_status_pipe_desc, (struct usb_descriptor_header *) &uasp_fs_cmd_desc, (struct usb_descriptor_header *) &uasp_cmd_pipe_desc, + NULL, }; static struct usb_descriptor_header *uasp_hs_function_desc[] = { @@ -2239,6 +2241,7 @@ static int usbg_bind(struct usb_configuration *c, struct usb_function *f) struct usb_gadget *gadget = c->cdev->gadget; struct usb_ep *ep; int iface; + int ret; iface = usb_interface_id(c, f); if (iface < 0) @@ -2289,6 +2292,11 @@ static int usbg_bind(struct usb_configuration *c, struct usb_function *f) uasp_ss_status_desc.bEndpointAddress; uasp_fs_cmd_desc.bEndpointAddress = uasp_ss_cmd_desc.bEndpointAddress; + ret = usb_assign_descriptors(f, uasp_fs_function_desc, + uasp_hs_function_desc, uasp_ss_function_desc); + if (ret) + goto ep_fail; + return 0; ep_fail: pr_err("Can't claim all required eps\n"); @@ -2304,6 +2312,7 @@ static void usbg_unbind(struct usb_configuration *c, struct usb_function *f) { struct f_uas *fu = to_f_uas(f); + usb_free_all_descriptors(f); kfree(fu); } @@ -2384,9 +2393,6 @@ static int usbg_cfg_bind(struct usb_configuration *c) if (!fu) return -ENOMEM; fu->function.name = "Target Function"; - fu->function.descriptors = uasp_fs_function_desc; - fu->function.hs_descriptors = uasp_hs_function_desc; - fu->function.ss_descriptors = uasp_ss_function_desc; fu->function.bind = usbg_bind; fu->function.unbind = usbg_unbind; fu->function.set_alt = usbg_set_alt; diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index 6458764994e..a0aa721d8b2 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -20,6 +20,7 @@ #include <linux/ctype.h> #include <linux/etherdevice.h> #include <linux/ethtool.h> +#include <linux/if_vlan.h> #include "u_ether.h" @@ -158,12 +159,12 @@ static int ueth_change_mtu(struct net_device *net, int new_mtu) static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p) { - struct eth_dev *dev = netdev_priv(net); + struct eth_dev *dev = netdev_priv(net); - strlcpy(p->driver, "g_ether", sizeof p->driver); - strlcpy(p->version, UETH__VERSION, sizeof p->version); - strlcpy(p->fw_version, dev->gadget->name, sizeof p->fw_version); - strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof p->bus_info); + strlcpy(p->driver, "g_ether", sizeof(p->driver)); + strlcpy(p->version, UETH__VERSION, sizeof(p->version)); + strlcpy(p->fw_version, dev->gadget->name, sizeof(p->fw_version)); + strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof(p->bus_info)); } /* REVISIT can also support: @@ -295,7 +296,7 @@ static void rx_complete(struct usb_ep *ep, struct usb_request *req) while (skb2) { if (status < 0 || ETH_HLEN > skb2->len - || skb2->len > ETH_FRAME_LEN) { + || skb2->len > VLAN_ETH_FRAME_LEN) { dev->net->stats.rx_errors++; dev->net->stats.rx_length_errors++; DBG(dev, "rx length %d\n", skb2->len); diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c index f1739526820..c5034d9c946 100644 --- a/drivers/usb/gadget/u_serial.c +++ b/drivers/usb/gadget/u_serial.c @@ -26,6 +26,7 @@ #include <linux/tty_flip.h> #include <linux/slab.h> #include <linux/export.h> +#include <linux/module.h> #include "u_serial.h" @@ -35,11 +36,12 @@ * "serial port" functionality through the USB gadget stack. Each such * port is exposed through a /dev/ttyGS* node. * - * After initialization (gserial_setup), these TTY port devices stay - * available until they are removed (gserial_cleanup). Each one may be - * connected to a USB function (gserial_connect), or disconnected (with - * gserial_disconnect) when the USB host issues a config change event. - * Data can only flow when the port is connected to the host. + * After this module has been loaded, the individual TTY port can be requested + * (gserial_alloc_line()) and it will stay available until they are removed + * (gserial_free_line()). Each one may be connected to a USB function + * (gserial_connect), or disconnected (with gserial_disconnect) when the USB + * host issues a config change event. Data can only flow when the port is + * connected to the host. * * A given TTY port can be made available in multiple configurations. * For example, each one might expose a ttyGS0 node which provides a @@ -119,13 +121,10 @@ struct gs_port { struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */ }; -/* increase N_PORTS if you need more */ -#define N_PORTS 4 static struct portmaster { struct mutex lock; /* protect open/close */ struct gs_port *port; -} ports[N_PORTS]; -static unsigned n_ports; +} ports[MAX_U_SERIAL_PORTS]; #define GS_CLOSE_TIMEOUT 15 /* seconds */ @@ -309,6 +308,7 @@ gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags) return req; } +EXPORT_SYMBOL_GPL(gs_alloc_req); /* * gs_free_req @@ -320,6 +320,7 @@ void gs_free_req(struct usb_ep *ep, struct usb_request *req) kfree(req->buf); usb_ep_free_request(ep, req); } +EXPORT_SYMBOL_GPL(gs_free_req); /* * gs_send_packet @@ -495,12 +496,8 @@ static void gs_rx_push(unsigned long _port) req = list_first_entry(queue, struct usb_request, list); - /* discard data if tty was closed */ - if (!tty) - goto recycle; - /* leave data queued if tty was rx throttled */ - if (test_bit(TTY_THROTTLED, &tty->flags)) + if (tty && test_bit(TTY_THROTTLED, &tty->flags)) break; switch (req->status) { @@ -533,7 +530,8 @@ static void gs_rx_push(unsigned long _port) size -= n; } - count = tty_insert_flip_string(tty, packet, size); + count = tty_insert_flip_string(&port->port, packet, + size); if (count) do_push = true; if (count != size) { @@ -546,7 +544,7 @@ static void gs_rx_push(unsigned long _port) } port->n_read = 0; } -recycle: + list_move(&req->list, &port->read_pool); port->read_started--; } @@ -554,8 +552,8 @@ recycle: /* Push from tty to ldisc; without low_latency set this is handled by * a workqueue, so we won't get callbacks and can hold port_lock */ - if (tty && do_push) - tty_flip_buffer_push(tty); + if (do_push) + tty_flip_buffer_push(&port->port); /* We want our data queue to become empty ASAP, keeping data @@ -887,7 +885,7 @@ static void gs_close(struct tty_struct *tty, struct file *file) pr_debug("gs_close: ttyGS%d (%p,%p) done!\n", port->port_num, tty, file); - wake_up_interruptible(&port->port.close_wait); + wake_up(&port->port.close_wait); exit: spin_unlock_irq(&port->port_lock); } @@ -1030,10 +1028,19 @@ static int gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding) { struct gs_port *port; + int ret = 0; + + mutex_lock(&ports[port_num].lock); + if (ports[port_num].port) { + ret = -EBUSY; + goto out; + } port = kzalloc(sizeof(struct gs_port), GFP_KERNEL); - if (port == NULL) - return -ENOMEM; + if (port == NULL) { + ret = -ENOMEM; + goto out; + } tty_port_init(&port->port); spin_lock_init(&port->port_lock); @@ -1049,107 +1056,9 @@ gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding) port->port_line_coding = *coding; ports[port_num].port = port; - - return 0; -} - -/** - * gserial_setup - initialize TTY driver for one or more ports - * @g: gadget to associate with these ports - * @count: how many ports to support - * Context: may sleep - * - * The TTY stack needs to know in advance how many devices it should - * plan to manage. Use this call to set up the ports you will be - * exporting through USB. Later, connect them to functions based - * on what configuration is activated by the USB host; and disconnect - * them as appropriate. - * - * An example would be a two-configuration device in which both - * configurations expose port 0, but through different functions. - * One configuration could even expose port 1 while the other - * one doesn't. - * - * Returns negative errno or zero. - */ -int gserial_setup(struct usb_gadget *g, unsigned count) -{ - unsigned i; - struct usb_cdc_line_coding coding; - int status; - - if (count == 0 || count > N_PORTS) - return -EINVAL; - - gs_tty_driver = alloc_tty_driver(count); - if (!gs_tty_driver) - return -ENOMEM; - - gs_tty_driver->driver_name = "g_serial"; - gs_tty_driver->name = PREFIX; - /* uses dynamically assigned dev_t values */ - - gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; - gs_tty_driver->subtype = SERIAL_TYPE_NORMAL; - gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; - gs_tty_driver->init_termios = tty_std_termios; - - /* 9600-8-N-1 ... matches defaults expected by "usbser.sys" on - * MS-Windows. Otherwise, most of these flags shouldn't affect - * anything unless we were to actually hook up to a serial line. - */ - gs_tty_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - gs_tty_driver->init_termios.c_ispeed = 9600; - gs_tty_driver->init_termios.c_ospeed = 9600; - - coding.dwDTERate = cpu_to_le32(9600); - coding.bCharFormat = 8; - coding.bParityType = USB_CDC_NO_PARITY; - coding.bDataBits = USB_CDC_1_STOP_BITS; - - tty_set_operations(gs_tty_driver, &gs_tty_ops); - - /* make devices be openable */ - for (i = 0; i < count; i++) { - mutex_init(&ports[i].lock); - status = gs_port_alloc(i, &coding); - if (status) { - count = i; - goto fail; - } - } - n_ports = count; - - /* export the driver ... */ - status = tty_register_driver(gs_tty_driver); - if (status) { - pr_err("%s: cannot register, err %d\n", - __func__, status); - goto fail; - } - - /* ... and sysfs class devices, so mdev/udev make /dev/ttyGS* */ - for (i = 0; i < count; i++) { - struct device *tty_dev; - - tty_dev = tty_port_register_device(&ports[i].port->port, - gs_tty_driver, i, &g->dev); - if (IS_ERR(tty_dev)) - pr_warning("%s: no classdev for port %d, err %ld\n", - __func__, i, PTR_ERR(tty_dev)); - } - - pr_debug("%s: registered %d ttyGS* device%s\n", __func__, - count, (count == 1) ? "" : "s"); - - return status; -fail: - while (count--) - kfree(ports[count].port); - put_tty_driver(gs_tty_driver); - gs_tty_driver = NULL; - return status; +out: + mutex_unlock(&ports[port_num].lock); + return ret; } static int gs_closed(struct gs_port *port) @@ -1162,54 +1071,77 @@ static int gs_closed(struct gs_port *port) return cond; } -/** - * gserial_cleanup - remove TTY-over-USB driver and devices - * Context: may sleep - * - * This is called to free all resources allocated by @gserial_setup(). - * Accordingly, it may need to wait until some open /dev/ files have - * closed. - * - * The caller must have issued @gserial_disconnect() for any ports - * that had previously been connected, so that there is never any - * I/O pending when it's called. - */ -void gserial_cleanup(void) +static void gserial_free_port(struct gs_port *port) +{ + tasklet_kill(&port->push); + /* wait for old opens to finish */ + wait_event(port->port.close_wait, gs_closed(port)); + WARN_ON(port->port_usb != NULL); + tty_port_destroy(&port->port); + kfree(port); +} + +void gserial_free_line(unsigned char port_num) { - unsigned i; struct gs_port *port; - if (!gs_tty_driver) + mutex_lock(&ports[port_num].lock); + if (WARN_ON(!ports[port_num].port)) { + mutex_unlock(&ports[port_num].lock); return; + } + port = ports[port_num].port; + ports[port_num].port = NULL; + mutex_unlock(&ports[port_num].lock); - /* start sysfs and /dev/ttyGS* node removal */ - for (i = 0; i < n_ports; i++) - tty_unregister_device(gs_tty_driver, i); - - for (i = 0; i < n_ports; i++) { - /* prevent new opens */ - mutex_lock(&ports[i].lock); - port = ports[i].port; - ports[i].port = NULL; - mutex_unlock(&ports[i].lock); - - tasklet_kill(&port->push); + gserial_free_port(port); + tty_unregister_device(gs_tty_driver, port_num); +} +EXPORT_SYMBOL_GPL(gserial_free_line); - /* wait for old opens to finish */ - wait_event(port->port.close_wait, gs_closed(port)); +int gserial_alloc_line(unsigned char *line_num) +{ + struct usb_cdc_line_coding coding; + struct device *tty_dev; + int ret; + int port_num; - WARN_ON(port->port_usb != NULL); + coding.dwDTERate = cpu_to_le32(9600); + coding.bCharFormat = 8; + coding.bParityType = USB_CDC_NO_PARITY; + coding.bDataBits = USB_CDC_1_STOP_BITS; - kfree(port); + for (port_num = 0; port_num < MAX_U_SERIAL_PORTS; port_num++) { + ret = gs_port_alloc(port_num, &coding); + if (ret == -EBUSY) + continue; + if (ret) + return ret; + break; } - n_ports = 0; + if (ret) + return ret; - tty_unregister_driver(gs_tty_driver); - put_tty_driver(gs_tty_driver); - gs_tty_driver = NULL; + /* ... and sysfs class devices, so mdev/udev make /dev/ttyGS* */ - pr_debug("%s: cleaned up ttyGS* support\n", __func__); + tty_dev = tty_port_register_device(&ports[port_num].port->port, + gs_tty_driver, port_num, NULL); + if (IS_ERR(tty_dev)) { + struct gs_port *port; + pr_err("%s: failed to register tty for port %d, err %ld\n", + __func__, port_num, PTR_ERR(tty_dev)); + + ret = PTR_ERR(tty_dev); + port = ports[port_num].port; + ports[port_num].port = NULL; + gserial_free_port(port); + goto err; + } + *line_num = port_num; +err: + return ret; } +EXPORT_SYMBOL_GPL(gserial_alloc_line); /** * gserial_connect - notify TTY I/O glue that USB link is active @@ -1226,8 +1158,8 @@ void gserial_cleanup(void) * * Caller needs to have set up the endpoints and USB function in @dev * before calling this, as well as the appropriate (speed-specific) - * endpoint descriptors, and also have set up the TTY driver by calling - * @gserial_setup(). + * endpoint descriptors, and also have allocate @port_num by calling + * @gserial_alloc_line(). * * Returns negative errno or zero. * On success, ep->driver_data will be overwritten. @@ -1238,11 +1170,18 @@ int gserial_connect(struct gserial *gser, u8 port_num) unsigned long flags; int status; - if (!gs_tty_driver || port_num >= n_ports) + if (port_num >= MAX_U_SERIAL_PORTS) return -ENXIO; - /* we "know" gserial_cleanup() hasn't been called */ port = ports[port_num].port; + if (!port) { + pr_err("serial line %d not allocated.\n", port_num); + return -EINVAL; + } + if (port->port_usb) { + pr_err("serial line %d is in use.\n", port_num); + return -EBUSY; + } /* activate the endpoints */ status = usb_ep_enable(gser->in); @@ -1289,7 +1228,7 @@ fail_out: gser->in->driver_data = NULL; return status; } - +EXPORT_SYMBOL_GPL(gserial_connect); /** * gserial_disconnect - notify TTY I/O glue that USB link is inactive * @gser: the function, on which gserial_connect() was called @@ -1344,3 +1283,65 @@ void gserial_disconnect(struct gserial *gser) spin_unlock_irqrestore(&port->port_lock, flags); } +EXPORT_SYMBOL_GPL(gserial_disconnect); + +static int userial_init(void) +{ + unsigned i; + int status; + + gs_tty_driver = alloc_tty_driver(MAX_U_SERIAL_PORTS); + if (!gs_tty_driver) + return -ENOMEM; + + gs_tty_driver->driver_name = "g_serial"; + gs_tty_driver->name = PREFIX; + /* uses dynamically assigned dev_t values */ + + gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; + gs_tty_driver->subtype = SERIAL_TYPE_NORMAL; + gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + gs_tty_driver->init_termios = tty_std_termios; + + /* 9600-8-N-1 ... matches defaults expected by "usbser.sys" on + * MS-Windows. Otherwise, most of these flags shouldn't affect + * anything unless we were to actually hook up to a serial line. + */ + gs_tty_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + gs_tty_driver->init_termios.c_ispeed = 9600; + gs_tty_driver->init_termios.c_ospeed = 9600; + + tty_set_operations(gs_tty_driver, &gs_tty_ops); + for (i = 0; i < MAX_U_SERIAL_PORTS; i++) + mutex_init(&ports[i].lock); + + /* export the driver ... */ + status = tty_register_driver(gs_tty_driver); + if (status) { + pr_err("%s: cannot register, err %d\n", + __func__, status); + goto fail; + } + + pr_debug("%s: registered %d ttyGS* device%s\n", __func__, + MAX_U_SERIAL_PORTS, + (MAX_U_SERIAL_PORTS == 1) ? "" : "s"); + + return status; +fail: + put_tty_driver(gs_tty_driver); + gs_tty_driver = NULL; + return status; +} +module_init(userial_init); + +static void userial_cleanup(void) +{ + tty_unregister_driver(gs_tty_driver); + put_tty_driver(gs_tty_driver); + gs_tty_driver = NULL; +} +module_exit(userial_cleanup); + +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/u_serial.h b/drivers/usb/gadget/u_serial.h index 9b0fe6450fb..66ce73a0050 100644 --- a/drivers/usb/gadget/u_serial.h +++ b/drivers/usb/gadget/u_serial.h @@ -15,6 +15,13 @@ #include <linux/usb/composite.h> #include <linux/usb/cdc.h> +#define MAX_U_SERIAL_PORTS 4 + +struct f_serial_opts { + struct usb_function_instance func_inst; + u8 port_num; +}; + /* * One non-multiplexed "serial" I/O port ... there can be several of these * on any given USB peripheral device, if it provides enough endpoints. @@ -49,9 +56,9 @@ struct gserial { struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t flags); void gs_free_req(struct usb_ep *, struct usb_request *req); -/* port setup/teardown is handled by gadget driver */ -int gserial_setup(struct usb_gadget *g, unsigned n_ports); -void gserial_cleanup(void); +/* management of individual TTY ports */ +int gserial_alloc_line(unsigned char *port_line); +void gserial_free_line(unsigned char port_line); /* connect/disconnect is handled by individual functions */ int gserial_connect(struct gserial *, u8 port_num); diff --git a/drivers/usb/gadget/u_uac1.c b/drivers/usb/gadget/u_uac1.c index e0c5e88e03e..c7d460f4339 100644 --- a/drivers/usb/gadget/u_uac1.c +++ b/drivers/usb/gadget/u_uac1.c @@ -240,8 +240,11 @@ static int gaudio_open_snd_dev(struct gaudio *card) snd = &card->playback; snd->filp = filp_open(fn_play, O_WRONLY, 0); if (IS_ERR(snd->filp)) { + int ret = PTR_ERR(snd->filp); + ERROR(card, "No such PCM playback device: %s\n", fn_play); snd->filp = NULL; + return ret; } pcm_file = snd->filp->private_data; snd->substream = pcm_file->substream; diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index f3cd9690b10..2a9cd369f71 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -102,28 +102,6 @@ EXPORT_SYMBOL_GPL(usb_gadget_unmap_request); /* ------------------------------------------------------------------------- */ /** - * usb_gadget_start - tells usb device controller to start up - * @gadget: The gadget we want to get started - * @driver: The driver we want to bind to @gadget - * @bind: The bind function for @driver - * - * This call is issued by the UDC Class driver when it's about - * to register a gadget driver to the device controller, before - * calling gadget driver's bind() method. - * - * It allows the controller to be powered off until strictly - * necessary to have it powered on. - * - * Returns zero on success, else negative errno. - */ -static inline int usb_gadget_start(struct usb_gadget *gadget, - struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *, struct usb_gadget_driver *)) -{ - return gadget->ops->start(driver, bind); -} - -/** * usb_gadget_udc_start - tells usb device controller to start up * @gadget: The gadget we want to get started * @driver: The driver we want to bind to @gadget @@ -144,24 +122,6 @@ static inline int usb_gadget_udc_start(struct usb_gadget *gadget, } /** - * usb_gadget_stop - tells usb device controller we don't need it anymore - * @gadget: The device we want to stop activity - * @driver: The driver to unbind from @gadget - * - * This call is issued by the UDC Class driver after calling - * gadget driver's unbind() method. - * - * The details are implementation specific, but it can go as - * far as powering off UDC completely and disable its data - * line pullups. - */ -static inline void usb_gadget_stop(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) -{ - gadget->ops->stop(driver); -} - -/** * usb_gadget_udc_stop - tells usb device controller we don't need it anymore * @gadget: The device we want to stop activity * @driver: The driver to unbind from @gadget @@ -246,14 +206,6 @@ err1: } EXPORT_SYMBOL_GPL(usb_add_gadget_udc); -static int udc_is_newstyle(struct usb_udc *udc) -{ - if (udc->gadget->ops->udc_start && udc->gadget->ops->udc_stop) - return 1; - return 0; -} - - static void usb_gadget_remove_driver(struct usb_udc *udc) { dev_dbg(&udc->dev, "unregistering UDC driver [%s]\n", @@ -261,14 +213,10 @@ static void usb_gadget_remove_driver(struct usb_udc *udc) kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE); - if (udc_is_newstyle(udc)) { - usb_gadget_disconnect(udc->gadget); - udc->driver->disconnect(udc->gadget); - udc->driver->unbind(udc->gadget); - usb_gadget_udc_stop(udc->gadget, udc->driver); - } else { - usb_gadget_stop(udc->gadget, udc->driver); - } + usb_gadget_disconnect(udc->gadget); + udc->driver->disconnect(udc->gadget); + udc->driver->unbind(udc->gadget); + usb_gadget_udc_stop(udc->gadget, udc->driver); udc->driver = NULL; udc->dev.driver = NULL; @@ -311,6 +259,62 @@ EXPORT_SYMBOL_GPL(usb_del_gadget_udc); /* ------------------------------------------------------------------------- */ +static int udc_bind_to_driver(struct usb_udc *udc, struct usb_gadget_driver *driver) +{ + int ret; + + dev_dbg(&udc->dev, "registering UDC driver [%s]\n", + driver->function); + + udc->driver = driver; + udc->dev.driver = &driver->driver; + + ret = driver->bind(udc->gadget, driver); + if (ret) + goto err1; + ret = usb_gadget_udc_start(udc->gadget, driver); + if (ret) { + driver->unbind(udc->gadget); + goto err1; + } + usb_gadget_connect(udc->gadget); + + kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE); + return 0; +err1: + dev_err(&udc->dev, "failed to start %s: %d\n", + udc->driver->function, ret); + udc->driver = NULL; + udc->dev.driver = NULL; + return ret; +} + +int udc_attach_driver(const char *name, struct usb_gadget_driver *driver) +{ + struct usb_udc *udc = NULL; + int ret = -ENODEV; + + mutex_lock(&udc_lock); + list_for_each_entry(udc, &udc_list, list) { + ret = strcmp(name, dev_name(&udc->dev)); + if (!ret) + break; + } + if (ret) { + ret = -ENODEV; + goto out; + } + if (udc->driver) { + ret = -EBUSY; + goto out; + } + ret = udc_bind_to_driver(udc, driver); +out: + mutex_unlock(&udc_lock); + return ret; +} +EXPORT_SYMBOL_GPL(udc_attach_driver); + int usb_gadget_probe_driver(struct usb_gadget_driver *driver) { struct usb_udc *udc = NULL; @@ -329,41 +333,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver) pr_debug("couldn't find an available UDC\n"); mutex_unlock(&udc_lock); return -ENODEV; - found: - dev_dbg(&udc->dev, "registering UDC driver [%s]\n", - driver->function); - - udc->driver = driver; - udc->dev.driver = &driver->driver; - - if (udc_is_newstyle(udc)) { - ret = driver->bind(udc->gadget, driver); - if (ret) - goto err1; - ret = usb_gadget_udc_start(udc->gadget, driver); - if (ret) { - driver->unbind(udc->gadget); - goto err1; - } - usb_gadget_connect(udc->gadget); - } else { - - ret = usb_gadget_start(udc->gadget, driver, driver->bind); - if (ret) - goto err1; - - } - - kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE); - mutex_unlock(&udc_lock); - return 0; - -err1: - dev_err(&udc->dev, "failed to start %s: %d\n", - udc->driver->function, ret); - udc->driver = NULL; - udc->dev.driver = NULL; + ret = udc_bind_to_driver(udc, driver); mutex_unlock(&udc_lock); return ret; } @@ -410,13 +381,11 @@ static ssize_t usb_udc_softconn_store(struct device *dev, struct usb_udc *udc = container_of(dev, struct usb_udc, dev); if (sysfs_streq(buf, "connect")) { - if (udc_is_newstyle(udc)) - usb_gadget_udc_start(udc->gadget, udc->driver); + usb_gadget_udc_start(udc->gadget, udc->driver); usb_gadget_connect(udc->gadget); } else if (sysfs_streq(buf, "disconnect")) { usb_gadget_disconnect(udc->gadget); - if (udc_is_newstyle(udc)) - usb_gadget_udc_stop(udc->gadget, udc->driver); + usb_gadget_udc_stop(udc->gadget, udc->driver); } else { dev_err(dev, "unsupported command '%s'\n", buf); return -EINVAL; @@ -439,16 +408,6 @@ static DEVICE_ATTR(name, S_IRUSR, usb_udc_##param##_show, NULL) static USB_UDC_SPEED_ATTR(current_speed, speed); static USB_UDC_SPEED_ATTR(maximum_speed, max_speed); -/* TODO: Scheduled for removal in 3.8. */ -static ssize_t usb_udc_is_dualspeed_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct usb_udc *udc = container_of(dev, struct usb_udc, dev); - return snprintf(buf, PAGE_SIZE, "%d\n", - gadget_is_dualspeed(udc->gadget)); -} -static DEVICE_ATTR(is_dualspeed, S_IRUSR, usb_udc_is_dualspeed_show, NULL); - #define USB_UDC_ATTR(name) \ ssize_t usb_udc_##name##_show(struct device *dev, \ struct device_attribute *attr, char *buf) \ @@ -472,7 +431,6 @@ static struct attribute *usb_udc_attrs[] = { &dev_attr_current_speed.attr, &dev_attr_maximum_speed.attr, - &dev_attr_is_dualspeed.attr, &dev_attr_is_otg.attr, &dev_attr_is_a_peripheral.attr, &dev_attr_b_hnp_enable.attr, diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c index 69cf5c2cd33..8cef1e658c2 100644 --- a/drivers/usb/gadget/webcam.c +++ b/drivers/usb/gadget/webcam.c @@ -336,7 +336,7 @@ static struct usb_configuration webcam_config_driver = { .bConfigurationValue = 1, .iConfiguration = 0, /* dynamic */ .bmAttributes = USB_CONFIG_ATT_SELFPOWER, - .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2, + .MaxPower = CONFIG_USB_GADGET_VBUS_DRAW, }; static int /* __init_or_exit */ diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 6bf4c061136..685fa681cb6 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -10,7 +10,6 @@ * (at your option) any later version. */ - /* * Gadget Zero only needs two bulk endpoints, and is an example of how you * can write a hardware-agnostic gadget driver running inside a USB device. @@ -43,23 +42,11 @@ #include <linux/kernel.h> #include <linux/slab.h> #include <linux/device.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/usb/composite.h> #include "g_zero.h" -#include "gadget_chips.h" - - -/*-------------------------------------------------------------------------*/ - -/* - * Kbuild is not very cooperative with respect to linking separately - * compiled library objects into one module. So for now we won't use - * separate compilation ... ensuring init/exit sections work to shrink - * the runtime footprint, and giving us at least some parts of what - * a "gcc --combine ... part1.c part2.c part3.c ... " build would. - */ -#include "f_sourcesink.c" -#include "f_loopback.c" - /*-------------------------------------------------------------------------*/ USB_GADGET_COMPOSITE_OPTIONS(); @@ -67,9 +54,6 @@ USB_GADGET_COMPOSITE_OPTIONS(); static const char longname[] = "Gadget Zero"; -unsigned buflen = 4096; /* only used for bulk endpoints */ -module_param(buflen, uint, 0); - /* * Normally the "loopback" configuration is second (index 1) so * it's not the default. Here's where to change that order, to @@ -79,6 +63,13 @@ module_param(buflen, uint, 0); static bool loopdefault = 0; module_param(loopdefault, bool, S_IRUGO|S_IWUSR); +static struct usb_zero_options gzero_options = { + .isoc_interval = 4, + .isoc_maxpacket = 1024, + .bulk_buflen = 4096, + .qlen = 32, +}; + /*-------------------------------------------------------------------------*/ /* Thanks to NetChip Technologies for donating this product ID. @@ -129,20 +120,27 @@ static struct usb_otg_descriptor otg_descriptor = { .bmAttributes = USB_OTG_SRP | USB_OTG_HNP, }; -const struct usb_descriptor_header *otg_desc[] = { +static const struct usb_descriptor_header *otg_desc[] = { (struct usb_descriptor_header *) &otg_descriptor, NULL, }; +#else +#define otg_desc NULL #endif /* string IDs are assigned dynamically */ /* default serial number takes at least two packets */ static char serial[] = "0123456789.0123456789.0123456789"; +#define USB_GZERO_SS_DESC (USB_GADGET_FIRST_AVAIL_IDX + 0) +#define USB_GZERO_LB_DESC (USB_GADGET_FIRST_AVAIL_IDX + 1) + static struct usb_string strings_dev[] = { [USB_GADGET_MANUFACTURER_IDX].s = "", [USB_GADGET_PRODUCT_IDX].s = longname, [USB_GADGET_SERIAL_IDX].s = serial, + [USB_GZERO_SS_DESC].s = "source and sink data", + [USB_GZERO_LB_DESC].s = "loop input to output", { } /* end of list */ }; @@ -158,58 +156,6 @@ static struct usb_gadget_strings *dev_strings[] = { /*-------------------------------------------------------------------------*/ -struct usb_request *alloc_ep_req(struct usb_ep *ep, int len) -{ - struct usb_request *req; - - req = usb_ep_alloc_request(ep, GFP_ATOMIC); - if (req) { - if (len) - req->length = len; - else - req->length = buflen; - req->buf = kmalloc(req->length, GFP_ATOMIC); - if (!req->buf) { - usb_ep_free_request(ep, req); - req = NULL; - } - } - return req; -} - -void free_ep_req(struct usb_ep *ep, struct usb_request *req) -{ - kfree(req->buf); - usb_ep_free_request(ep, req); -} - -static void disable_ep(struct usb_composite_dev *cdev, struct usb_ep *ep) -{ - int value; - - if (ep->driver_data) { - value = usb_ep_disable(ep); - if (value < 0) - DBG(cdev, "disable %s --> %d\n", - ep->name, value); - ep->driver_data = NULL; - } -} - -void disable_endpoints(struct usb_composite_dev *cdev, - struct usb_ep *in, struct usb_ep *out, - struct usb_ep *iso_in, struct usb_ep *iso_out) -{ - disable_ep(cdev, in); - disable_ep(cdev, out); - if (iso_in) - disable_ep(cdev, iso_in); - if (iso_out) - disable_ep(cdev, iso_out); -} - -/*-------------------------------------------------------------------------*/ - static struct timer_list autoresume_timer; static void zero_autoresume(unsigned long _c) @@ -251,8 +197,65 @@ static void zero_resume(struct usb_composite_dev *cdev) /*-------------------------------------------------------------------------*/ +static struct usb_configuration loopback_driver = { + .label = "loopback", + .bConfigurationValue = 2, + .bmAttributes = USB_CONFIG_ATT_SELFPOWER, + /* .iConfiguration = DYNAMIC */ +}; + +static struct usb_function *func_ss; +static struct usb_function_instance *func_inst_ss; + +static int ss_config_setup(struct usb_configuration *c, + const struct usb_ctrlrequest *ctrl) +{ + switch (ctrl->bRequest) { + case 0x5b: + case 0x5c: + return func_ss->setup(func_ss, ctrl); + default: + return -EOPNOTSUPP; + } +} + +static struct usb_configuration sourcesink_driver = { + .label = "source/sink", + .setup = ss_config_setup, + .bConfigurationValue = 3, + .bmAttributes = USB_CONFIG_ATT_SELFPOWER, + /* .iConfiguration = DYNAMIC */ +}; + +module_param_named(buflen, gzero_options.bulk_buflen, uint, 0); +module_param_named(pattern, gzero_options.pattern, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(pattern, "0 = all zeroes, 1 = mod63, 2 = none"); + +module_param_named(isoc_interval, gzero_options.isoc_interval, uint, + S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(isoc_interval, "1 - 16"); + +module_param_named(isoc_maxpacket, gzero_options.isoc_maxpacket, uint, + S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(isoc_maxpacket, "0 - 1023 (fs), 0 - 1024 (hs/ss)"); + +module_param_named(isoc_mult, gzero_options.isoc_mult, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(isoc_mult, "0 - 2 (hs/ss only)"); + +module_param_named(isoc_maxburst, gzero_options.isoc_maxburst, uint, + S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(isoc_maxburst, "0 - 15 (ss only)"); + +static struct usb_function *func_lb; +static struct usb_function_instance *func_inst_lb; + +module_param_named(qlen, gzero_options.qlen, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(qlen, "depth of loopback queue"); + static int __init zero_bind(struct usb_composite_dev *cdev) { + struct f_ss_opts *ss_opts; + struct f_lb_opts *lb_opts; int status; /* Allocate string descriptor numbers ... note that string @@ -268,27 +271,105 @@ static int __init zero_bind(struct usb_composite_dev *cdev) setup_timer(&autoresume_timer, zero_autoresume, (unsigned long) cdev); + func_inst_ss = usb_get_function_instance("SourceSink"); + if (IS_ERR(func_inst_ss)) + return PTR_ERR(func_inst_ss); + + ss_opts = container_of(func_inst_ss, struct f_ss_opts, func_inst); + ss_opts->pattern = gzero_options.pattern; + ss_opts->isoc_interval = gzero_options.isoc_interval; + ss_opts->isoc_maxpacket = gzero_options.isoc_maxpacket; + ss_opts->isoc_mult = gzero_options.isoc_mult; + ss_opts->isoc_maxburst = gzero_options.isoc_maxpacket; + ss_opts->bulk_buflen = gzero_options.bulk_buflen; + + func_ss = usb_get_function(func_inst_ss); + if (IS_ERR(func_ss)) + goto err_put_func_inst_ss; + + func_inst_lb = usb_get_function_instance("Loopback"); + if (IS_ERR(func_inst_lb)) + goto err_put_func_ss; + + lb_opts = container_of(func_inst_lb, struct f_lb_opts, func_inst); + lb_opts->bulk_buflen = gzero_options.bulk_buflen; + lb_opts->qlen = gzero_options.qlen; + + func_lb = usb_get_function(func_inst_lb); + if (IS_ERR(func_lb)) { + status = PTR_ERR(func_lb); + goto err_put_func_inst_lb; + } + + sourcesink_driver.iConfiguration = strings_dev[USB_GZERO_SS_DESC].id; + loopback_driver.iConfiguration = strings_dev[USB_GZERO_LB_DESC].id; + + /* support autoresume for remote wakeup testing */ + sourcesink_driver.bmAttributes &= ~USB_CONFIG_ATT_WAKEUP; + loopback_driver.bmAttributes &= ~USB_CONFIG_ATT_WAKEUP; + sourcesink_driver.descriptors = NULL; + loopback_driver.descriptors = NULL; + if (autoresume) { + sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + } + + /* support OTG systems */ + if (gadget_is_otg(cdev->gadget)) { + sourcesink_driver.descriptors = otg_desc; + sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + loopback_driver.descriptors = otg_desc; + loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + } + /* Register primary, then secondary configuration. Note that * SH3 only allows one config... */ if (loopdefault) { - loopback_add(cdev, autoresume != 0); - sourcesink_add(cdev, autoresume != 0); + usb_add_config_only(cdev, &loopback_driver); + usb_add_config_only(cdev, &sourcesink_driver); } else { - sourcesink_add(cdev, autoresume != 0); - loopback_add(cdev, autoresume != 0); + usb_add_config_only(cdev, &sourcesink_driver); + usb_add_config_only(cdev, &loopback_driver); } + status = usb_add_function(&sourcesink_driver, func_ss); + if (status) + goto err_conf_flb; + + usb_ep_autoconfig_reset(cdev->gadget); + status = usb_add_function(&loopback_driver, func_lb); + if (status) + goto err_conf_flb; + usb_ep_autoconfig_reset(cdev->gadget); usb_composite_overwrite_options(cdev, &coverwrite); INFO(cdev, "%s, version: " DRIVER_VERSION "\n", longname); return 0; + +err_conf_flb: + usb_put_function(func_lb); + func_lb = NULL; +err_put_func_inst_lb: + usb_put_function_instance(func_inst_lb); + func_inst_lb = NULL; +err_put_func_ss: + usb_put_function(func_ss); + func_ss = NULL; +err_put_func_inst_ss: + usb_put_function_instance(func_inst_ss); + func_inst_ss = NULL; + return status; } static int zero_unbind(struct usb_composite_dev *cdev) { del_timer_sync(&autoresume_timer); + if (!IS_ERR_OR_NULL(func_ss)) + usb_put_function(func_ss); + if (!IS_ERR_OR_NULL(func_lb)) + usb_put_function(func_lb); return 0; } diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 3f1431d37e1..c59a1126926 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -95,6 +95,11 @@ config USB_EHCI_TT_NEWSCHED If unsure, say Y. +config USB_EHCI_PCI + tristate + depends on USB_EHCI_HCD && PCI + default y + config USB_EHCI_HCD_PMC_MSP tristate "EHCI support for on-chip PMC MSP71xx USB controller" depends on USB_EHCI_HCD && MSP_HAS_USB @@ -143,7 +148,7 @@ config USB_EHCI_FSL Variation of ARC USB block used in some Freescale chips. config USB_EHCI_MXC - bool "Support for Freescale i.MX on-chip EHCI USB controller" + tristate "Support for Freescale i.MX on-chip EHCI USB controller" depends on USB_EHCI_HCD && ARCH_MXC select USB_EHCI_ROOT_HUB_TT ---help--- @@ -215,9 +220,13 @@ config USB_W90X900_EHCI Enables support for the W90X900 USB controller config USB_CNS3XXX_EHCI - bool "Cavium CNS3XXX EHCI Module" + bool "Cavium CNS3XXX EHCI Module (DEPRECATED)" depends on USB_EHCI_HCD && ARCH_CNS3XXX + select USB_EHCI_HCD_PLATFORM ---help--- + This option is deprecated now and the driver was removed, use + USB_EHCI_HCD_PLATFORM instead. + Enable support for the CNS3XXX SOC's on-chip EHCI controller. It is needed for high-speed (480Mbit/sec) USB 2.0 device support. @@ -237,7 +246,7 @@ config USB_EHCI_ATH79 config USB_OXU210HP_HCD tristate "OXU210HP HCD support" - depends on USB + depends on USB && GENERIC_HARDIRQS ---help--- The OXU210HP is an USB host/OTG/device controller. Enable this option if your board has this chip. If unsure, say N. @@ -333,16 +342,6 @@ config USB_OHCI_ATH79 Enables support for the built-in OHCI controller present on the Atheros AR71XX/AR7240 SoCs. -config USB_OHCI_HCD_PPC_SOC - bool "OHCI support for on-chip PPC USB controller" - depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx) - default y - select USB_OHCI_BIG_ENDIAN_DESC - select USB_OHCI_BIG_ENDIAN_MMIO - ---help--- - Enables support for the USB controller on the MPC52xx or - STB03xxx processor chip. If unsure, say Y. - config USB_OHCI_HCD_PPC_OF_BE bool "OHCI support for OF platform bus (big endian)" depends on USB_OHCI_HCD && PPC_OF @@ -393,9 +392,13 @@ config USB_OHCI_HCD_SSB If unsure, say N. config USB_OHCI_SH - bool "OHCI support for SuperH USB controller" + bool "OHCI support for SuperH USB controller (DEPRECATED)" depends on USB_OHCI_HCD && SUPERH + select USB_OHCI_HCD_PLATFORM ---help--- + This option is deprecated now and the driver was removed, use + USB_OHCI_HCD_PLATFORM instead. + Enables support for the on-chip OHCI controller on the SuperH. If you use the PCI OHCI controller, this option is not necessary. @@ -406,9 +409,13 @@ config USB_OHCI_EXYNOS Enable support for the Samsung Exynos SOC's on-chip OHCI controller. config USB_CNS3XXX_OHCI - bool "Cavium CNS3XXX OHCI Module" + bool "Cavium CNS3XXX OHCI Module (DEPRECATED)" depends on USB_OHCI_HCD && ARCH_CNS3XXX + select USB_OHCI_HCD_PLATFORM ---help--- + This option is deprecated now and the driver was removed, use + USB_OHCI_HCD_PLATFORM instead. + Enable support for the CNS3XXX SOC's on-chip OHCI controller. It is needed for low-speed USB 1.0 device support. @@ -423,7 +430,7 @@ config USB_OHCI_HCD_PLATFORM If unsure, say N. config USB_EHCI_HCD_PLATFORM - bool "Generic EHCI driver for a platform device" + tristate "Generic EHCI driver for a platform device" depends on USB_EHCI_HCD default n ---help--- diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 9e0a89ced15..001fbff2fde 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -24,6 +24,10 @@ obj-$(CONFIG_USB_WHCI_HCD) += whci/ obj-$(CONFIG_PCI) += pci-quirks.o obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o +obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o +obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o +obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o + obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o obj-$(CONFIG_USB_ISP1362_HCD) += isp1362-hcd.o @@ -40,6 +44,5 @@ obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o -obj-$(CONFIG_MIPS_ALCHEMY) += alchemy-common.o obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o diff --git a/drivers/usb/host/alchemy-common.c b/drivers/usb/host/alchemy-common.c deleted file mode 100644 index 936af8359fb..00000000000 --- a/drivers/usb/host/alchemy-common.c +++ /dev/null @@ -1,614 +0,0 @@ -/* - * USB block power/access management abstraction. - * - * Au1000+: The OHCI block control register is at the far end of the OHCI memory - * area. Au1550 has OHCI on different base address. No need to handle - * UDC here. - * Au1200: one register to control access and clocks to O/EHCI, UDC and OTG - * as well as the PHY for EHCI and UDC. - * - */ - -#include <linux/init.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/spinlock.h> -#include <linux/syscore_ops.h> -#include <asm/mach-au1x00/au1000.h> - -/* control register offsets */ -#define AU1000_OHCICFG 0x7fffc -#define AU1550_OHCICFG 0x07ffc -#define AU1200_USBCFG 0x04 - -/* Au1000 USB block config bits */ -#define USBHEN_RD (1 << 4) /* OHCI reset-done indicator */ -#define USBHEN_CE (1 << 3) /* OHCI block clock enable */ -#define USBHEN_E (1 << 2) /* OHCI block enable */ -#define USBHEN_C (1 << 1) /* OHCI block coherency bit */ -#define USBHEN_BE (1 << 0) /* OHCI Big-Endian */ - -/* Au1200 USB config bits */ -#define USBCFG_PFEN (1 << 31) /* prefetch enable (undoc) */ -#define USBCFG_RDCOMB (1 << 30) /* read combining (undoc) */ -#define USBCFG_UNKNOWN (5 << 20) /* unknown, leave this way */ -#define USBCFG_SSD (1 << 23) /* serial short detect en */ -#define USBCFG_PPE (1 << 19) /* HS PHY PLL */ -#define USBCFG_UCE (1 << 18) /* UDC clock enable */ -#define USBCFG_ECE (1 << 17) /* EHCI clock enable */ -#define USBCFG_OCE (1 << 16) /* OHCI clock enable */ -#define USBCFG_FLA(x) (((x) & 0x3f) << 8) -#define USBCFG_UCAM (1 << 7) /* coherent access (undoc) */ -#define USBCFG_GME (1 << 6) /* OTG mem access */ -#define USBCFG_DBE (1 << 5) /* UDC busmaster enable */ -#define USBCFG_DME (1 << 4) /* UDC mem enable */ -#define USBCFG_EBE (1 << 3) /* EHCI busmaster enable */ -#define USBCFG_EME (1 << 2) /* EHCI mem enable */ -#define USBCFG_OBE (1 << 1) /* OHCI busmaster enable */ -#define USBCFG_OME (1 << 0) /* OHCI mem enable */ -#define USBCFG_INIT_AU1200 (USBCFG_PFEN | USBCFG_RDCOMB | USBCFG_UNKNOWN |\ - USBCFG_SSD | USBCFG_FLA(0x20) | USBCFG_UCAM | \ - USBCFG_GME | USBCFG_DBE | USBCFG_DME | \ - USBCFG_EBE | USBCFG_EME | USBCFG_OBE | \ - USBCFG_OME) - -/* Au1300 USB config registers */ -#define USB_DWC_CTRL1 0x00 -#define USB_DWC_CTRL2 0x04 -#define USB_VBUS_TIMER 0x10 -#define USB_SBUS_CTRL 0x14 -#define USB_MSR_ERR 0x18 -#define USB_DWC_CTRL3 0x1C -#define USB_DWC_CTRL4 0x20 -#define USB_OTG_STATUS 0x28 -#define USB_DWC_CTRL5 0x2C -#define USB_DWC_CTRL6 0x30 -#define USB_DWC_CTRL7 0x34 -#define USB_PHY_STATUS 0xC0 -#define USB_INT_STATUS 0xC4 -#define USB_INT_ENABLE 0xC8 - -#define USB_DWC_CTRL1_OTGD 0x04 /* set to DISable OTG */ -#define USB_DWC_CTRL1_HSTRS 0x02 /* set to ENable EHCI */ -#define USB_DWC_CTRL1_DCRS 0x01 /* set to ENable UDC */ - -#define USB_DWC_CTRL2_PHY1RS 0x04 /* set to enable PHY1 */ -#define USB_DWC_CTRL2_PHY0RS 0x02 /* set to enable PHY0 */ -#define USB_DWC_CTRL2_PHYRS 0x01 /* set to enable PHY */ - -#define USB_DWC_CTRL3_OHCI1_CKEN (1 << 19) -#define USB_DWC_CTRL3_OHCI0_CKEN (1 << 18) -#define USB_DWC_CTRL3_EHCI0_CKEN (1 << 17) -#define USB_DWC_CTRL3_OTG0_CKEN (1 << 16) - -#define USB_SBUS_CTRL_SBCA 0x04 /* coherent access */ - -#define USB_INTEN_FORCE 0x20 -#define USB_INTEN_PHY 0x10 -#define USB_INTEN_UDC 0x08 -#define USB_INTEN_EHCI 0x04 -#define USB_INTEN_OHCI1 0x02 -#define USB_INTEN_OHCI0 0x01 - -static DEFINE_SPINLOCK(alchemy_usb_lock); - -static inline void __au1300_usb_phyctl(void __iomem *base, int enable) -{ - unsigned long r, s; - - r = __raw_readl(base + USB_DWC_CTRL2); - s = __raw_readl(base + USB_DWC_CTRL3); - - s &= USB_DWC_CTRL3_OHCI1_CKEN | USB_DWC_CTRL3_OHCI0_CKEN | - USB_DWC_CTRL3_EHCI0_CKEN | USB_DWC_CTRL3_OTG0_CKEN; - - if (enable) { - /* simply enable all PHYs */ - r |= USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS | - USB_DWC_CTRL2_PHYRS; - __raw_writel(r, base + USB_DWC_CTRL2); - wmb(); - } else if (!s) { - /* no USB block active, do disable all PHYs */ - r &= ~(USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS | - USB_DWC_CTRL2_PHYRS); - __raw_writel(r, base + USB_DWC_CTRL2); - wmb(); - } -} - -static inline void __au1300_ohci_control(void __iomem *base, int enable, int id) -{ - unsigned long r; - - if (enable) { - __raw_writel(1, base + USB_DWC_CTRL7); /* start OHCI clock */ - wmb(); - - r = __raw_readl(base + USB_DWC_CTRL3); /* enable OHCI block */ - r |= (id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN - : USB_DWC_CTRL3_OHCI1_CKEN; - __raw_writel(r, base + USB_DWC_CTRL3); - wmb(); - - __au1300_usb_phyctl(base, enable); /* power up the PHYs */ - - r = __raw_readl(base + USB_INT_ENABLE); - r |= (id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1; - __raw_writel(r, base + USB_INT_ENABLE); - wmb(); - - /* reset the OHCI start clock bit */ - __raw_writel(0, base + USB_DWC_CTRL7); - wmb(); - } else { - r = __raw_readl(base + USB_INT_ENABLE); - r &= ~((id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1); - __raw_writel(r, base + USB_INT_ENABLE); - wmb(); - - r = __raw_readl(base + USB_DWC_CTRL3); - r &= ~((id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN - : USB_DWC_CTRL3_OHCI1_CKEN); - __raw_writel(r, base + USB_DWC_CTRL3); - wmb(); - - __au1300_usb_phyctl(base, enable); - } -} - -static inline void __au1300_ehci_control(void __iomem *base, int enable) -{ - unsigned long r; - - if (enable) { - r = __raw_readl(base + USB_DWC_CTRL3); - r |= USB_DWC_CTRL3_EHCI0_CKEN; - __raw_writel(r, base + USB_DWC_CTRL3); - wmb(); - - r = __raw_readl(base + USB_DWC_CTRL1); - r |= USB_DWC_CTRL1_HSTRS; - __raw_writel(r, base + USB_DWC_CTRL1); - wmb(); - - __au1300_usb_phyctl(base, enable); - - r = __raw_readl(base + USB_INT_ENABLE); - r |= USB_INTEN_EHCI; - __raw_writel(r, base + USB_INT_ENABLE); - wmb(); - } else { - r = __raw_readl(base + USB_INT_ENABLE); - r &= ~USB_INTEN_EHCI; - __raw_writel(r, base + USB_INT_ENABLE); - wmb(); - - r = __raw_readl(base + USB_DWC_CTRL1); - r &= ~USB_DWC_CTRL1_HSTRS; - __raw_writel(r, base + USB_DWC_CTRL1); - wmb(); - - r = __raw_readl(base + USB_DWC_CTRL3); - r &= ~USB_DWC_CTRL3_EHCI0_CKEN; - __raw_writel(r, base + USB_DWC_CTRL3); - wmb(); - - __au1300_usb_phyctl(base, enable); - } -} - -static inline void __au1300_udc_control(void __iomem *base, int enable) -{ - unsigned long r; - - if (enable) { - r = __raw_readl(base + USB_DWC_CTRL1); - r |= USB_DWC_CTRL1_DCRS; - __raw_writel(r, base + USB_DWC_CTRL1); - wmb(); - - __au1300_usb_phyctl(base, enable); - - r = __raw_readl(base + USB_INT_ENABLE); - r |= USB_INTEN_UDC; - __raw_writel(r, base + USB_INT_ENABLE); - wmb(); - } else { - r = __raw_readl(base + USB_INT_ENABLE); - r &= ~USB_INTEN_UDC; - __raw_writel(r, base + USB_INT_ENABLE); - wmb(); - - r = __raw_readl(base + USB_DWC_CTRL1); - r &= ~USB_DWC_CTRL1_DCRS; - __raw_writel(r, base + USB_DWC_CTRL1); - wmb(); - - __au1300_usb_phyctl(base, enable); - } -} - -static inline void __au1300_otg_control(void __iomem *base, int enable) -{ - unsigned long r; - if (enable) { - r = __raw_readl(base + USB_DWC_CTRL3); - r |= USB_DWC_CTRL3_OTG0_CKEN; - __raw_writel(r, base + USB_DWC_CTRL3); - wmb(); - - r = __raw_readl(base + USB_DWC_CTRL1); - r &= ~USB_DWC_CTRL1_OTGD; - __raw_writel(r, base + USB_DWC_CTRL1); - wmb(); - - __au1300_usb_phyctl(base, enable); - } else { - r = __raw_readl(base + USB_DWC_CTRL1); - r |= USB_DWC_CTRL1_OTGD; - __raw_writel(r, base + USB_DWC_CTRL1); - wmb(); - - r = __raw_readl(base + USB_DWC_CTRL3); - r &= ~USB_DWC_CTRL3_OTG0_CKEN; - __raw_writel(r, base + USB_DWC_CTRL3); - wmb(); - - __au1300_usb_phyctl(base, enable); - } -} - -static inline int au1300_usb_control(int block, int enable) -{ - void __iomem *base = - (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); - int ret = 0; - - switch (block) { - case ALCHEMY_USB_OHCI0: - __au1300_ohci_control(base, enable, 0); - break; - case ALCHEMY_USB_OHCI1: - __au1300_ohci_control(base, enable, 1); - break; - case ALCHEMY_USB_EHCI0: - __au1300_ehci_control(base, enable); - break; - case ALCHEMY_USB_UDC0: - __au1300_udc_control(base, enable); - break; - case ALCHEMY_USB_OTG0: - __au1300_otg_control(base, enable); - break; - default: - ret = -ENODEV; - } - return ret; -} - -static inline void au1300_usb_init(void) -{ - void __iomem *base = - (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); - - /* set some sane defaults. Note: we don't fiddle with DWC_CTRL4 - * here at all: Port 2 routing (EHCI or UDC) must be set either - * by boot firmware or platform init code; I can't autodetect - * a sane setting. - */ - __raw_writel(0, base + USB_INT_ENABLE); /* disable all USB irqs */ - wmb(); - __raw_writel(0, base + USB_DWC_CTRL3); /* disable all clocks */ - wmb(); - __raw_writel(~0, base + USB_MSR_ERR); /* clear all errors */ - wmb(); - __raw_writel(~0, base + USB_INT_STATUS); /* clear int status */ - wmb(); - /* set coherent access bit */ - __raw_writel(USB_SBUS_CTRL_SBCA, base + USB_SBUS_CTRL); - wmb(); -} - -static inline void __au1200_ohci_control(void __iomem *base, int enable) -{ - unsigned long r = __raw_readl(base + AU1200_USBCFG); - if (enable) { - __raw_writel(r | USBCFG_OCE, base + AU1200_USBCFG); - wmb(); - udelay(2000); - } else { - __raw_writel(r & ~USBCFG_OCE, base + AU1200_USBCFG); - wmb(); - udelay(1000); - } -} - -static inline void __au1200_ehci_control(void __iomem *base, int enable) -{ - unsigned long r = __raw_readl(base + AU1200_USBCFG); - if (enable) { - __raw_writel(r | USBCFG_ECE | USBCFG_PPE, base + AU1200_USBCFG); - wmb(); - udelay(1000); - } else { - if (!(r & USBCFG_UCE)) /* UDC also off? */ - r &= ~USBCFG_PPE; /* yes: disable HS PHY PLL */ - __raw_writel(r & ~USBCFG_ECE, base + AU1200_USBCFG); - wmb(); - udelay(1000); - } -} - -static inline void __au1200_udc_control(void __iomem *base, int enable) -{ - unsigned long r = __raw_readl(base + AU1200_USBCFG); - if (enable) { - __raw_writel(r | USBCFG_UCE | USBCFG_PPE, base + AU1200_USBCFG); - wmb(); - } else { - if (!(r & USBCFG_ECE)) /* EHCI also off? */ - r &= ~USBCFG_PPE; /* yes: disable HS PHY PLL */ - __raw_writel(r & ~USBCFG_UCE, base + AU1200_USBCFG); - wmb(); - } -} - -static inline int au1200_coherency_bug(void) -{ -#if defined(CONFIG_DMA_COHERENT) - /* Au1200 AB USB does not support coherent memory */ - if (!(read_c0_prid() & 0xff)) { - printk(KERN_INFO "Au1200 USB: this is chip revision AB !!\n"); - printk(KERN_INFO "Au1200 USB: update your board or re-configure" - " the kernel\n"); - return -ENODEV; - } -#endif - return 0; -} - -static inline int au1200_usb_control(int block, int enable) -{ - void __iomem *base = - (void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR); - int ret = 0; - - switch (block) { - case ALCHEMY_USB_OHCI0: - ret = au1200_coherency_bug(); - if (ret && enable) - goto out; - __au1200_ohci_control(base, enable); - break; - case ALCHEMY_USB_UDC0: - __au1200_udc_control(base, enable); - break; - case ALCHEMY_USB_EHCI0: - ret = au1200_coherency_bug(); - if (ret && enable) - goto out; - __au1200_ehci_control(base, enable); - break; - default: - ret = -ENODEV; - } -out: - return ret; -} - - -/* initialize USB block(s) to a known working state */ -static inline void au1200_usb_init(void) -{ - void __iomem *base = - (void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR); - __raw_writel(USBCFG_INIT_AU1200, base + AU1200_USBCFG); - wmb(); - udelay(1000); -} - -static inline void au1000_usb_init(unsigned long rb, int reg) -{ - void __iomem *base = (void __iomem *)KSEG1ADDR(rb + reg); - unsigned long r = __raw_readl(base); - -#if defined(__BIG_ENDIAN) - r |= USBHEN_BE; -#endif - r |= USBHEN_C; - - __raw_writel(r, base); - wmb(); - udelay(1000); -} - - -static inline void __au1xx0_ohci_control(int enable, unsigned long rb, int creg) -{ - void __iomem *base = (void __iomem *)KSEG1ADDR(rb); - unsigned long r = __raw_readl(base + creg); - - if (enable) { - __raw_writel(r | USBHEN_CE, base + creg); - wmb(); - udelay(1000); - __raw_writel(r | USBHEN_CE | USBHEN_E, base + creg); - wmb(); - udelay(1000); - - /* wait for reset complete (read reg twice: au1500 erratum) */ - while (__raw_readl(base + creg), - !(__raw_readl(base + creg) & USBHEN_RD)) - udelay(1000); - } else { - __raw_writel(r & ~(USBHEN_CE | USBHEN_E), base + creg); - wmb(); - } -} - -static inline int au1000_usb_control(int block, int enable, unsigned long rb, - int creg) -{ - int ret = 0; - - switch (block) { - case ALCHEMY_USB_OHCI0: - __au1xx0_ohci_control(enable, rb, creg); - break; - default: - ret = -ENODEV; - } - return ret; -} - -/* - * alchemy_usb_control - control Alchemy on-chip USB blocks - * @block: USB block to target - * @enable: set 1 to enable a block, 0 to disable - */ -int alchemy_usb_control(int block, int enable) -{ - unsigned long flags; - int ret; - - spin_lock_irqsave(&alchemy_usb_lock, flags); - switch (alchemy_get_cputype()) { - case ALCHEMY_CPU_AU1000: - case ALCHEMY_CPU_AU1500: - case ALCHEMY_CPU_AU1100: - ret = au1000_usb_control(block, enable, - AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG); - break; - case ALCHEMY_CPU_AU1550: - ret = au1000_usb_control(block, enable, - AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG); - break; - case ALCHEMY_CPU_AU1200: - ret = au1200_usb_control(block, enable); - break; - case ALCHEMY_CPU_AU1300: - ret = au1300_usb_control(block, enable); - break; - default: - ret = -ENODEV; - } - spin_unlock_irqrestore(&alchemy_usb_lock, flags); - return ret; -} -EXPORT_SYMBOL_GPL(alchemy_usb_control); - - -static unsigned long alchemy_usb_pmdata[2]; - -static void au1000_usb_pm(unsigned long br, int creg, int susp) -{ - void __iomem *base = (void __iomem *)KSEG1ADDR(br); - - if (susp) { - alchemy_usb_pmdata[0] = __raw_readl(base + creg); - /* There appears to be some undocumented reset register.... */ - __raw_writel(0, base + 0x04); - wmb(); - __raw_writel(0, base + creg); - wmb(); - } else { - __raw_writel(alchemy_usb_pmdata[0], base + creg); - wmb(); - } -} - -static void au1200_usb_pm(int susp) -{ - void __iomem *base = - (void __iomem *)KSEG1ADDR(AU1200_USB_OTG_PHYS_ADDR); - if (susp) { - /* save OTG_CAP/MUX registers which indicate port routing */ - /* FIXME: write an OTG driver to do that */ - alchemy_usb_pmdata[0] = __raw_readl(base + 0x00); - alchemy_usb_pmdata[1] = __raw_readl(base + 0x04); - } else { - /* restore access to all MMIO areas */ - au1200_usb_init(); - - /* restore OTG_CAP/MUX registers */ - __raw_writel(alchemy_usb_pmdata[0], base + 0x00); - __raw_writel(alchemy_usb_pmdata[1], base + 0x04); - wmb(); - } -} - -static void au1300_usb_pm(int susp) -{ - void __iomem *base = - (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); - /* remember Port2 routing */ - if (susp) { - alchemy_usb_pmdata[0] = __raw_readl(base + USB_DWC_CTRL4); - } else { - au1300_usb_init(); - __raw_writel(alchemy_usb_pmdata[0], base + USB_DWC_CTRL4); - wmb(); - } -} - -static void alchemy_usb_pm(int susp) -{ - switch (alchemy_get_cputype()) { - case ALCHEMY_CPU_AU1000: - case ALCHEMY_CPU_AU1500: - case ALCHEMY_CPU_AU1100: - au1000_usb_pm(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG, susp); - break; - case ALCHEMY_CPU_AU1550: - au1000_usb_pm(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG, susp); - break; - case ALCHEMY_CPU_AU1200: - au1200_usb_pm(susp); - break; - case ALCHEMY_CPU_AU1300: - au1300_usb_pm(susp); - break; - } -} - -static int alchemy_usb_suspend(void) -{ - alchemy_usb_pm(1); - return 0; -} - -static void alchemy_usb_resume(void) -{ - alchemy_usb_pm(0); -} - -static struct syscore_ops alchemy_usb_pm_ops = { - .suspend = alchemy_usb_suspend, - .resume = alchemy_usb_resume, -}; - -static int __init alchemy_usb_init(void) -{ - switch (alchemy_get_cputype()) { - case ALCHEMY_CPU_AU1000: - case ALCHEMY_CPU_AU1500: - case ALCHEMY_CPU_AU1100: - au1000_usb_init(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG); - break; - case ALCHEMY_CPU_AU1550: - au1000_usb_init(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG); - break; - case ALCHEMY_CPU_AU1200: - au1200_usb_init(); - break; - case ALCHEMY_CPU_AU1300: - au1300_usb_init(); - break; - } - - register_syscore_ops(&alchemy_usb_pm_ops); - - return 0; -} -arch_initcall(alchemy_usb_init); diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c index 443da21d73c..df13d425e9c 100644 --- a/drivers/usb/host/bcma-hcd.c +++ b/drivers/usb/host/bcma-hcd.c @@ -54,7 +54,7 @@ static int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask, return -ETIMEDOUT; } -static void __devinit bcma_hcd_4716wa(struct bcma_device *dev) +static void bcma_hcd_4716wa(struct bcma_device *dev) { #ifdef CONFIG_BCMA_DRIVER_MIPS /* Work around for 4716 failures. */ @@ -88,7 +88,7 @@ static void __devinit bcma_hcd_4716wa(struct bcma_device *dev) } /* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */ -static void __devinit bcma_hcd_init_chip(struct bcma_device *dev) +static void bcma_hcd_init_chip(struct bcma_device *dev) { u32 tmp; @@ -165,8 +165,7 @@ static const struct usb_ehci_pdata ehci_pdata = { static const struct usb_ohci_pdata ohci_pdata = { }; -static struct platform_device * __devinit -bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr) +static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr) { struct platform_device *hci_dev; struct resource hci_res[2]; @@ -212,7 +211,7 @@ err_alloc: return ERR_PTR(ret); } -static int __devinit bcma_hcd_probe(struct bcma_device *dev) +static int bcma_hcd_probe(struct bcma_device *dev) { int err; u16 chipid_top; @@ -266,7 +265,7 @@ err_free_usb_dev: return err; } -static void __devexit bcma_hcd_remove(struct bcma_device *dev) +static void bcma_hcd_remove(struct bcma_device *dev) { struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev); struct platform_device *ohci_dev = usb_dev->ohci_dev; @@ -306,7 +305,7 @@ static int bcma_hcd_resume(struct bcma_device *dev) #define bcma_hcd_resume NULL #endif /* CONFIG_PM */ -static const struct bcma_device_id bcma_hcd_table[] __devinitconst = { +static const struct bcma_device_id bcma_hcd_table[] = { BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS), BCMA_CORETABLE_END }; @@ -316,7 +315,7 @@ static struct bcma_driver bcma_hcd_driver = { .name = KBUILD_MODNAME, .id_table = bcma_hcd_table, .probe = bcma_hcd_probe, - .remove = __devexit_p(bcma_hcd_remove), + .remove = bcma_hcd_remove, .shutdown = bcma_hcd_shutdown, .suspend = bcma_hcd_suspend, .resume = bcma_hcd_resume, diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index 411bb74152e..f3beac4d06b 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -53,18 +53,11 @@ static void atmel_stop_ehci(struct platform_device *pdev) static int ehci_atmel_setup(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int retval; /* registers start at offset 0x0 */ ehci->caps = hcd->regs; - retval = ehci_setup(hcd); - if (retval) - return retval; - - ehci_port_power(ehci, 0); - - return retval; + return ehci_setup(hcd); } static const struct hc_driver ehci_atmel_hc_driver = { @@ -104,7 +97,7 @@ static const struct hc_driver ehci_atmel_hc_driver = { static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32); -static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev) +static int ehci_atmel_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd; const struct hc_driver *driver = &ehci_atmel_hc_driver; @@ -150,10 +143,9 @@ static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - hcd->regs = devm_request_and_ioremap(&pdev->dev, res); - if (hcd->regs == NULL) { - dev_dbg(&pdev->dev, "error mapping memory\n"); - retval = -EFAULT; + hcd->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hcd->regs)) { + retval = PTR_ERR(hcd->regs); goto fail_request_resource; } @@ -189,7 +181,7 @@ fail_create_hcd: return retval; } -static int __devexit ehci_atmel_drv_remove(struct platform_device *pdev) +static int ehci_atmel_drv_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); @@ -214,7 +206,7 @@ MODULE_DEVICE_TABLE(of, atmel_ehci_dt_ids); static struct platform_driver ehci_atmel_driver = { .probe = ehci_atmel_drv_probe, - .remove = __devexit_p(ehci_atmel_drv_remove), + .remove = ehci_atmel_drv_remove, .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "atmel-ehci", diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c deleted file mode 100644 index 65c945eb414..00000000000 --- a/drivers/usb/host/ehci-au1xxx.c +++ /dev/null @@ -1,184 +0,0 @@ -/* - * EHCI HCD (Host Controller Driver) for USB. - * - * Bus Glue for AMD Alchemy Au1xxx - * - * Based on "ohci-au1xxx.c" by Matt Porter <mporter@kernel.crashing.org> - * - * Modified for AMD Alchemy Au1200 EHC - * by K.Boge <karsten.boge@amd.com> - * - * This file is licenced under the GPL. - */ - -#include <linux/platform_device.h> -#include <asm/mach-au1x00/au1000.h> - - -extern int usb_disabled(void); - -static int au1xxx_ehci_setup(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int ret; - - ehci->caps = hcd->regs; - ret = ehci_setup(hcd); - - ehci->need_io_watchdog = 0; - return ret; -} - -static const struct hc_driver ehci_au1xxx_hc_driver = { - .description = hcd_name, - .product_desc = "Au1xxx EHCI", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - /* - * basic lifecycle operations - * - * FIXME -- ehci_init() doesn't do enough here. - * See ehci-ppc-soc for a complete implementation. - */ - .reset = au1xxx_ehci_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - -static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev) -{ - struct usb_hcd *hcd; - struct resource *res; - int ret; - - if (usb_disabled()) - return -ENODEV; - - if (pdev->resource[1].flags != IORESOURCE_IRQ) { - pr_debug("resource[1] is not IORESOURCE_IRQ"); - return -ENOMEM; - } - hcd = usb_create_hcd(&ehci_au1xxx_hc_driver, &pdev->dev, "Au1xxx"); - if (!hcd) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - - hcd->regs = devm_request_and_ioremap(&pdev->dev, res); - if (!hcd->regs) { - pr_debug("devm_request_and_ioremap failed"); - ret = -ENOMEM; - goto err1; - } - - if (alchemy_usb_control(ALCHEMY_USB_EHCI0, 1)) { - printk(KERN_INFO "%s: controller init failed!\n", pdev->name); - ret = -ENODEV; - goto err1; - } - - ret = usb_add_hcd(hcd, pdev->resource[1].start, - IRQF_SHARED); - if (ret == 0) { - platform_set_drvdata(pdev, hcd); - return ret; - } - - alchemy_usb_control(ALCHEMY_USB_EHCI0, 0); -err1: - usb_put_hcd(hcd); - return ret; -} - -static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_remove_hcd(hcd); - alchemy_usb_control(ALCHEMY_USB_EHCI0, 0); - usb_put_hcd(hcd); - platform_set_drvdata(pdev, NULL); - - return 0; -} - -#ifdef CONFIG_PM -static int ehci_hcd_au1xxx_drv_suspend(struct device *dev) -{ - struct usb_hcd *hcd = dev_get_drvdata(dev); - bool do_wakeup = device_may_wakeup(dev); - int rc; - - rc = ehci_suspend(hcd, do_wakeup); - alchemy_usb_control(ALCHEMY_USB_EHCI0, 0); - - return rc; -} - -static int ehci_hcd_au1xxx_drv_resume(struct device *dev) -{ - struct usb_hcd *hcd = dev_get_drvdata(dev); - - alchemy_usb_control(ALCHEMY_USB_EHCI0, 1); - ehci_resume(hcd, false); - - return 0; -} - -static const struct dev_pm_ops au1xxx_ehci_pmops = { - .suspend = ehci_hcd_au1xxx_drv_suspend, - .resume = ehci_hcd_au1xxx_drv_resume, -}; - -#define AU1XXX_EHCI_PMOPS &au1xxx_ehci_pmops - -#else -#define AU1XXX_EHCI_PMOPS NULL -#endif - -static struct platform_driver ehci_hcd_au1xxx_driver = { - .probe = ehci_hcd_au1xxx_drv_probe, - .remove = ehci_hcd_au1xxx_drv_remove, - .shutdown = usb_hcd_platform_shutdown, - .driver = { - .name = "au1xxx-ehci", - .owner = THIS_MODULE, - .pm = AU1XXX_EHCI_PMOPS, - } -}; - -MODULE_ALIAS("platform:au1xxx-ehci"); diff --git a/drivers/usb/host/ehci-cns3xxx.c b/drivers/usb/host/ehci-cns3xxx.c deleted file mode 100644 index d91708d2e72..00000000000 --- a/drivers/usb/host/ehci-cns3xxx.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/atomic.h> -#include <mach/cns3xxx.h> -#include <mach/pm.h> - -static int cns3xxx_ehci_init(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int retval; - - /* - * EHCI and OHCI share the same clock and power, - * resetting twice would cause the 1st controller been reset. - * Therefore only do power up at the first up device, and - * power down at the last down device. - * - * Set USB AHB INCR length to 16 - */ - if (atomic_inc_return(&usb_pwr_ref) == 1) { - cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB); - cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST); - cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST); - __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)), - MISC_CHIP_CONFIG_REG); - } - - ehci->caps = hcd->regs; - - hcd->has_tt = 0; - - retval = ehci_setup(hcd); - if (retval) - return retval; - - ehci_port_power(ehci, 0); - - return retval; -} - -static const struct hc_driver cns3xxx_ehci_hc_driver = { - .description = hcd_name, - .product_desc = "CNS3XXX EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - .reset = cns3xxx_ehci_init, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - .get_frame_number = ehci_get_frame, - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, -#endif - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - -static int cns3xxx_ehci_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct usb_hcd *hcd; - const struct hc_driver *driver = &cns3xxx_ehci_hc_driver; - struct resource *res; - int irq; - int retval; - - if (usb_disabled()) - return -ENODEV; - - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { - dev_err(dev, "Found HC with no IRQ.\n"); - return -ENODEV; - } - irq = res->start; - - hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); - if (!hcd) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "Found HC with no register addr.\n"); - retval = -ENODEV; - goto err1; - } - - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - - hcd->regs = devm_request_and_ioremap(&pdev->dev, res); - if (hcd->regs == NULL) { - dev_dbg(dev, "error mapping memory\n"); - retval = -EFAULT; - goto err1; - } - - retval = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (retval == 0) - return retval; - -err1: - usb_put_hcd(hcd); - - return retval; -} - -static int cns3xxx_ehci_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_remove_hcd(hcd); - - /* - * EHCI and OHCI share the same clock and power, - * resetting twice would cause the 1st controller been reset. - * Therefore only do power up at the first up device, and - * power down at the last down device. - */ - if (atomic_dec_return(&usb_pwr_ref) == 0) - cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST); - - usb_put_hcd(hcd); - - platform_set_drvdata(pdev, NULL); - - return 0; -} - -MODULE_ALIAS("platform:cns3xxx-ehci"); - -static struct platform_driver cns3xxx_ehci_driver = { - .probe = cns3xxx_ehci_probe, - .remove = cns3xxx_ehci_remove, - .driver = { - .name = "cns3xxx-ehci", - }, -}; diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 1599806e3d4..70b496dc18a 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -18,21 +18,6 @@ /* this file is part of ehci-hcd.c */ -#define ehci_dbg(ehci, fmt, args...) \ - dev_dbg (ehci_to_hcd(ehci)->self.controller , fmt , ## args ) -#define ehci_err(ehci, fmt, args...) \ - dev_err (ehci_to_hcd(ehci)->self.controller , fmt , ## args ) -#define ehci_info(ehci, fmt, args...) \ - dev_info (ehci_to_hcd(ehci)->self.controller , fmt , ## args ) -#define ehci_warn(ehci, fmt, args...) \ - dev_warn (ehci_to_hcd(ehci)->self.controller , fmt , ## args ) - -#ifdef VERBOSE_DEBUG -# define ehci_vdbg ehci_dbg -#else - static inline void ehci_vdbg(struct ehci_hcd *ehci, ...) {} -#endif - #ifdef DEBUG /* check the values in the HCSPARAMS register @@ -352,11 +337,6 @@ static int debug_async_open(struct inode *, struct file *); static int debug_periodic_open(struct inode *, struct file *); static int debug_registers_open(struct inode *, struct file *); static int debug_async_open(struct inode *, struct file *); -static ssize_t debug_lpm_read(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos); -static ssize_t debug_lpm_write(struct file *file, const char __user *buffer, - size_t count, loff_t *ppos); -static int debug_lpm_close(struct inode *inode, struct file *file); static ssize_t debug_output(struct file*, char __user*, size_t, loff_t*); static int debug_close(struct inode *, struct file *); @@ -382,14 +362,6 @@ static const struct file_operations debug_registers_fops = { .release = debug_close, .llseek = default_llseek, }; -static const struct file_operations debug_lpm_fops = { - .owner = THIS_MODULE, - .open = simple_open, - .read = debug_lpm_read, - .write = debug_lpm_write, - .release = debug_lpm_close, - .llseek = noop_llseek, -}; static struct dentry *ehci_debug_root; @@ -971,86 +943,6 @@ static int debug_registers_open(struct inode *inode, struct file *file) return file->private_data ? 0 : -ENOMEM; } -static int debug_lpm_close(struct inode *inode, struct file *file) -{ - return 0; -} - -static ssize_t debug_lpm_read(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - /* TODO: show lpm stats */ - return 0; -} - -static ssize_t debug_lpm_write(struct file *file, const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct usb_hcd *hcd; - struct ehci_hcd *ehci; - char buf[50]; - size_t len; - u32 temp; - unsigned long port; - u32 __iomem *portsc ; - u32 params; - - hcd = bus_to_hcd(file->private_data); - ehci = hcd_to_ehci(hcd); - - len = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, len)) - return -EFAULT; - buf[len] = '\0'; - if (len > 0 && buf[len - 1] == '\n') - buf[len - 1] = '\0'; - - if (strncmp(buf, "enable", 5) == 0) { - if (strict_strtoul(buf + 7, 10, &port)) - return -EINVAL; - params = ehci_readl(ehci, &ehci->caps->hcs_params); - if (port > HCS_N_PORTS(params)) { - ehci_dbg(ehci, "ERR: LPM on bad port %lu\n", port); - return -ENODEV; - } - portsc = &ehci->regs->port_status[port-1]; - temp = ehci_readl(ehci, portsc); - if (!(temp & PORT_DEV_ADDR)) { - ehci_dbg(ehci, "LPM: no device attached\n"); - return -ENODEV; - } - temp |= PORT_LPM; - ehci_writel(ehci, temp, portsc); - printk(KERN_INFO "force enable LPM for port %lu\n", port); - } else if (strncmp(buf, "hird=", 5) == 0) { - unsigned long hird; - if (strict_strtoul(buf + 5, 16, &hird)) - return -EINVAL; - printk(KERN_INFO "setting hird %s %lu\n", buf + 6, hird); - ehci->command = (ehci->command & ~CMD_HIRD) | (hird << 24); - ehci_writel(ehci, ehci->command, &ehci->regs->command); - } else if (strncmp(buf, "disable", 7) == 0) { - if (strict_strtoul(buf + 8, 10, &port)) - return -EINVAL; - params = ehci_readl(ehci, &ehci->caps->hcs_params); - if (port > HCS_N_PORTS(params)) { - ehci_dbg(ehci, "ERR: LPM off bad port %lu\n", port); - return -ENODEV; - } - portsc = &ehci->regs->port_status[port-1]; - temp = ehci_readl(ehci, portsc); - if (!(temp & PORT_DEV_ADDR)) { - ehci_dbg(ehci, "ERR: no device attached\n"); - return -ENODEV; - } - temp &= ~PORT_LPM; - ehci_writel(ehci, temp, portsc); - printk(KERN_INFO "disabled LPM for port %lu\n", port); - } else - return -EOPNOTSUPP; - return count; -} - static inline void create_debug_files (struct ehci_hcd *ehci) { struct usb_bus *bus = &ehci_to_hcd(ehci)->self; @@ -1071,10 +963,6 @@ static inline void create_debug_files (struct ehci_hcd *ehci) &debug_registers_fops)) goto file_error; - if (!debugfs_create_file("lpm", S_IRUGO|S_IWUSR, ehci->debug_dir, bus, - &debug_lpm_fops)) - goto file_error; - return; file_error: diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 0d2f35ca93f..d81d2fcbff1 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -230,7 +230,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, switch (phy_mode) { case FSL_USB2_PHY_ULPI: - if (pdata->controller_ver) { + if (pdata->have_sysif_regs && pdata->controller_ver) { /* controller version 1.6 or above */ setbits32(non_ehci + FSL_SOC_USB_CTRL, ULPI_PHY_CLK_SEL); @@ -251,7 +251,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, portsc |= PORT_PTS_PTW; /* fall through */ case FSL_USB2_PHY_UTMI: - if (pdata->controller_ver) { + if (pdata->have_sysif_regs && pdata->controller_ver) { /* controller version 1.6 or above */ setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN); mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to @@ -267,7 +267,8 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, break; } - if (pdata->controller_ver && (phy_mode == FSL_USB2_PHY_ULPI)) { + if (pdata->have_sysif_regs && pdata->controller_ver && + (phy_mode == FSL_USB2_PHY_ULPI)) { /* check PHY_CLK_VALID to get phy clk valid */ if (!spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) & PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0)) { @@ -278,7 +279,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]); - if (phy_mode != FSL_USB2_PHY_ULPI) + if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs) setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN); return 0; @@ -349,7 +350,6 @@ static int ehci_fsl_reinit(struct ehci_hcd *ehci) { if (ehci_fsl_usb_setup(ehci)) return -EINVAL; - ehci_port_power(ehci, 0); return 0; } diff --git a/drivers/usb/host/ehci-grlib.c b/drivers/usb/host/ehci-grlib.c index 3180cb3624d..5d75de9729b 100644 --- a/drivers/usb/host/ehci-grlib.c +++ b/drivers/usb/host/ehci-grlib.c @@ -25,7 +25,7 @@ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ - +#include <linux/err.h> #include <linux/signal.h> #include <linux/of_irq.h> @@ -34,22 +34,6 @@ #define GRUSBHC_HCIVERSION 0x0100 /* Known value of cap. reg. HCIVERSION */ -/* called during probe() after chip reset completes */ -static int ehci_grlib_setup(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int retval; - - retval = ehci_setup(hcd); - if (retval) - return retval; - - ehci_port_power(ehci, 1); - - return retval; -} - - static const struct hc_driver ehci_grlib_hc_driver = { .description = hcd_name, .product_desc = "GRLIB GRUSBHC EHCI", @@ -64,7 +48,7 @@ static const struct hc_driver ehci_grlib_hc_driver = { /* * basic lifecycle operations */ - .reset = ehci_grlib_setup, + .reset = ehci_setup, .start = ehci_run, .stop = ehci_stop, .shutdown = ehci_shutdown, @@ -98,7 +82,7 @@ static const struct hc_driver ehci_grlib_hc_driver = { }; -static int __devinit ehci_hcd_grlib_probe(struct platform_device *op) +static int ehci_hcd_grlib_probe(struct platform_device *op) { struct device_node *dn = op->dev.of_node; struct usb_hcd *hcd; @@ -134,10 +118,9 @@ static int __devinit ehci_hcd_grlib_probe(struct platform_device *op) goto err_irq; } - hcd->regs = devm_request_and_ioremap(&op->dev, &res); - if (!hcd->regs) { - pr_err("%s: devm_request_and_ioremap failed\n", __FILE__); - rv = -ENOMEM; + hcd->regs = devm_ioremap_resource(&op->dev, &res); + if (IS_ERR(hcd->regs)) { + rv = PTR_ERR(hcd->regs); goto err_ioremap; } diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 6bf6c42481e..5726cb144ab 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -39,7 +39,6 @@ #include <linux/dma-mapping.h> #include <linux/debugfs.h> #include <linux/slab.h> -#include <linux/uaccess.h> #include <asm/byteorder.h> #include <asm/io.h> @@ -75,10 +74,6 @@ static const char hcd_name [] = "ehci_hcd"; #undef VERBOSE_DEBUG #undef EHCI_URB_TRACE -#ifdef DEBUG -#define EHCI_STATS -#endif - /* magic numbers that can affect system performance */ #define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */ #define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */ @@ -108,19 +103,39 @@ static bool ignore_oc = 0; module_param (ignore_oc, bool, S_IRUGO); MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications"); -/* for link power management(LPM) feature */ -static unsigned int hird; -module_param(hird, int, S_IRUGO); -MODULE_PARM_DESC(hird, "host initiated resume duration, +1 for each 75us"); - #define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT) /*-------------------------------------------------------------------------*/ #include "ehci.h" -#include "ehci-dbg.c" #include "pci-quirks.h" +/* + * The MosChip MCS9990 controller updates its microframe counter + * a little before the frame counter, and occasionally we will read + * the invalid intermediate value. Avoid problems by checking the + * microframe number (the low-order 3 bits); if they are 0 then + * re-read the register to get the correct value. + */ +static unsigned ehci_moschip_read_frame_index(struct ehci_hcd *ehci) +{ + unsigned uf; + + uf = ehci_readl(ehci, &ehci->regs->frame_index); + if (unlikely((uf & 7) == 0)) + uf = ehci_readl(ehci, &ehci->regs->frame_index); + return uf; +} + +static inline unsigned ehci_read_frame_index(struct ehci_hcd *ehci) +{ + if (ehci->frame_index_bug) + return ehci_moschip_read_frame_index(ehci); + return ehci_readl(ehci, &ehci->regs->frame_index); +} + +#include "ehci-dbg.c" + /*-------------------------------------------------------------------------*/ /* @@ -293,7 +308,6 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh); #include "ehci-timer.c" #include "ehci-hub.c" -#include "ehci-lpm.c" #include "ehci-mem.c" #include "ehci-q.c" #include "ehci-sched.c" @@ -353,24 +367,6 @@ static void ehci_shutdown(struct usb_hcd *hcd) hrtimer_cancel(&ehci->hrtimer); } -static void ehci_port_power (struct ehci_hcd *ehci, int is_on) -{ - unsigned port; - - if (!HCS_PPC (ehci->hcs_params)) - return; - - ehci_dbg (ehci, "...power%s ports...\n", is_on ? "up" : "down"); - for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) - (void) ehci_hub_control(ehci_to_hcd(ehci), - is_on ? SetPortFeature : ClearPortFeature, - USB_PORT_FEAT_POWER, - port--, NULL, 0); - /* Flush those writes */ - ehci_readl(ehci, &ehci->regs->command); - msleep(20); -} - /*-------------------------------------------------------------------------*/ /* @@ -503,7 +499,7 @@ static int ehci_init(struct usb_hcd *hcd) /* controllers may cache some of the periodic schedule ... */ if (HCC_ISOC_CACHE(hcc_params)) // full frame cache - ehci->i_thresh = 2 + 8; + ehci->i_thresh = 0; else // N microframes cached ehci->i_thresh = 2 + HCC_ISOC_THRES(hcc_params); @@ -555,17 +551,6 @@ static int ehci_init(struct usb_hcd *hcd) temp &= ~(3 << 2); temp |= (EHCI_TUNE_FLS << 2); } - if (HCC_LPM(hcc_params)) { - /* support link power management EHCI 1.1 addendum */ - ehci_dbg(ehci, "support lpm\n"); - ehci->has_lpm = 1; - if (hird > 0xf) { - ehci_dbg(ehci, "hird %d invalid, use default 0", - hird); - hird = 0; - } - temp |= hird << 24; - } ehci->command = temp; /* Accept arbitrarily long scatter-gather lists */ @@ -660,7 +645,7 @@ static int ehci_run (struct usb_hcd *hcd) return 0; } -static int ehci_setup(struct usb_hcd *hcd) +int ehci_setup(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); int retval; @@ -691,6 +676,7 @@ static int ehci_setup(struct usb_hcd *hcd) return 0; } +EXPORT_SYMBOL_GPL(ehci_setup); /*-------------------------------------------------------------------------*/ @@ -762,11 +748,9 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* guard against (alleged) silicon errata */ if (cmd & CMD_IAAD) ehci_dbg(ehci, "IAA with IAAD still set?\n"); - if (ehci->async_iaa) { + if (ehci->async_iaa) COUNT(ehci->stats.iaa); - end_unlink_async(ehci); - } else - ehci_dbg(ehci, "IAA with nothing unlinked?\n"); + end_unlink_async(ehci); } /* remote wakeup [4.3.1] */ @@ -811,6 +795,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) ehci->reset_done[i] = jiffies + msecs_to_jiffies(25); set_bit(i, &ehci->resuming_ports); ehci_dbg (ehci, "port %d remote wakeup\n", i + 1); + usb_hcd_start_port_resume(&hcd->self, i); mod_timer(&hcd->rh_timer, ehci->reset_done[i]); } } @@ -1096,7 +1081,7 @@ static int ehci_get_frame (struct usb_hcd *hcd) /* These routines handle the generic parts of controller suspend/resume */ -static int __maybe_unused ehci_suspend(struct usb_hcd *hcd, bool do_wakeup) +int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); @@ -1119,9 +1104,10 @@ static int __maybe_unused ehci_suspend(struct usb_hcd *hcd, bool do_wakeup) return 0; } +EXPORT_SYMBOL_GPL(ehci_suspend); /* Returns 0 if power was preserved, 1 if power was lost */ -static int __maybe_unused ehci_resume(struct usb_hcd *hcd, bool hibernated) +int ehci_resume(struct usb_hcd *hcd, bool hibernated) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); @@ -1177,53 +1163,93 @@ static int __maybe_unused ehci_resume(struct usb_hcd *hcd, bool hibernated) ehci->rh_state = EHCI_RH_SUSPENDED; spin_unlock_irq(&ehci->lock); - /* here we "know" root ports should always stay powered */ - ehci_port_power(ehci, 1); - return 1; } +EXPORT_SYMBOL_GPL(ehci_resume); #endif /*-------------------------------------------------------------------------*/ /* - * The EHCI in ChipIdea HDRC cannot be a separate module or device, - * because its registers (and irq) are shared between host/gadget/otg - * functions and in order to facilitate role switching we cannot - * give the ehci driver exclusive access to those. + * Generic structure: This gets copied for platform drivers so that + * individual entries can be overridden as needed. */ -#ifndef CHIPIDEA_EHCI + +static const struct hc_driver ehci_hc_driver = { + .description = hcd_name, + .product_desc = "EHCI Host Controller", + .hcd_priv_size = sizeof(struct ehci_hcd), + + /* + * generic hardware linkage + */ + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2, + + /* + * basic lifecycle operations + */ + .reset = ehci_setup, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, + + /* + * scheduling support + */ + .get_frame_number = ehci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, +}; + +void ehci_init_driver(struct hc_driver *drv, + const struct ehci_driver_overrides *over) +{ + /* Copy the generic table to drv and then apply the overrides */ + *drv = ehci_hc_driver; + + if (over) { + drv->hcd_priv_size += over->extra_priv_size; + if (over->reset) + drv->reset = over->reset; + } +} +EXPORT_SYMBOL_GPL(ehci_init_driver); + +/*-------------------------------------------------------------------------*/ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR (DRIVER_AUTHOR); MODULE_LICENSE ("GPL"); -#ifdef CONFIG_PCI -#include "ehci-pci.c" -#define PCI_DRIVER ehci_pci_driver -#endif - #ifdef CONFIG_USB_EHCI_FSL #include "ehci-fsl.c" #define PLATFORM_DRIVER ehci_fsl_driver #endif -#ifdef CONFIG_USB_EHCI_MXC -#include "ehci-mxc.c" -#define PLATFORM_DRIVER ehci_mxc_driver -#endif - #ifdef CONFIG_USB_EHCI_SH #include "ehci-sh.c" #define PLATFORM_DRIVER ehci_hcd_sh_driver #endif -#ifdef CONFIG_MIPS_ALCHEMY -#include "ehci-au1xxx.c" -#define PLATFORM_DRIVER ehci_hcd_au1xxx_driver -#endif - #ifdef CONFIG_USB_EHCI_HCD_OMAP #include "ehci-omap.c" #define PLATFORM_DRIVER ehci_hcd_omap_driver @@ -1249,11 +1275,6 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_orion_driver #endif -#ifdef CONFIG_ARCH_IXP4XX -#include "ehci-ixp4xx.c" -#define PLATFORM_DRIVER ixp4xx_ehci_driver -#endif - #ifdef CONFIG_USB_W90X900_EHCI #include "ehci-w90x900.c" #define PLATFORM_DRIVER ehci_hcd_w90x900_driver @@ -1269,11 +1290,6 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_octeon_driver #endif -#ifdef CONFIG_USB_CNS3XXX_EHCI -#include "ehci-cns3xxx.c" -#define PLATFORM_DRIVER cns3xxx_ehci_driver -#endif - #ifdef CONFIG_ARCH_VT8500 #include "ehci-vt8500.c" #define PLATFORM_DRIVER vt8500_ehci_driver @@ -1314,34 +1330,24 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_grlib_driver #endif -#ifdef CONFIG_CPU_XLR -#include "ehci-xls.c" -#define PLATFORM_DRIVER ehci_xls_driver -#endif - #ifdef CONFIG_USB_EHCI_MV #include "ehci-mv.c" #define PLATFORM_DRIVER ehci_mv_driver #endif -#ifdef CONFIG_MACH_LOONGSON1 -#include "ehci-ls1x.c" -#define PLATFORM_DRIVER ehci_ls1x_driver -#endif - #ifdef CONFIG_MIPS_SEAD3 #include "ehci-sead3.c" #define PLATFORM_DRIVER ehci_hcd_sead3_driver #endif -#ifdef CONFIG_USB_EHCI_HCD_PLATFORM -#include "ehci-platform.c" -#define PLATFORM_DRIVER ehci_platform_driver -#endif - -#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ - !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ - !defined(XILINX_OF_PLATFORM_DRIVER) +#if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \ + !IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \ + !IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \ + !IS_ENABLED(CONFIG_USB_EHCI_MXC) && \ + !defined(PLATFORM_DRIVER) && \ + !defined(PS3_SYSTEM_BUS_DRIVER) && \ + !defined(OF_PLATFORM_DRIVER) && \ + !defined(XILINX_OF_PLATFORM_DRIVER) #error "missing bus glue for ehci-hcd" #endif @@ -1378,12 +1384,6 @@ static int __init ehci_hcd_init(void) goto clean0; #endif -#ifdef PCI_DRIVER - retval = pci_register_driver(&PCI_DRIVER); - if (retval < 0) - goto clean1; -#endif - #ifdef PS3_SYSTEM_BUS_DRIVER retval = ps3_ehci_driver_register(&PS3_SYSTEM_BUS_DRIVER); if (retval < 0) @@ -1415,10 +1415,6 @@ clean3: ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER); clean2: #endif -#ifdef PCI_DRIVER - pci_unregister_driver(&PCI_DRIVER); -clean1: -#endif #ifdef PLATFORM_DRIVER platform_driver_unregister(&PLATFORM_DRIVER); clean0: @@ -1444,9 +1440,6 @@ static void __exit ehci_hcd_cleanup(void) #ifdef PLATFORM_DRIVER platform_driver_unregister(&PLATFORM_DRIVER); #endif -#ifdef PCI_DRIVER - pci_unregister_driver(&PCI_DRIVER); -#endif #ifdef PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER); #endif @@ -1456,5 +1449,3 @@ static void __exit ehci_hcd_cleanup(void) clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded); } module_exit(ehci_hcd_cleanup); - -#endif /* CHIPIDEA_EHCI */ diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 914ce9370e7..4d3b294f203 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -56,6 +56,19 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci) if (!ehci->owned_ports) return; + /* Make sure the ports are powered */ + port = HCS_N_PORTS(ehci->hcs_params); + while (port--) { + if (test_bit(port, &ehci->owned_ports)) { + reg = &ehci->regs->port_status[port]; + status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS; + if (!(status & PORT_POWER)) { + status |= PORT_POWER; + ehci_writel(ehci, status, reg); + } + } + } + /* Give the connections some time to appear */ msleep(20); @@ -384,11 +397,24 @@ static int ehci_bus_resume (struct usb_hcd *hcd) ehci_writel(ehci, ehci->command, &ehci->regs->command); ehci->rh_state = EHCI_RH_RUNNING; - /* Some controller/firmware combinations need a delay during which - * they set up the port statuses. See Bugzilla #8190. */ - spin_unlock_irq(&ehci->lock); - msleep(8); - spin_lock_irq(&ehci->lock); + /* + * According to Bugzilla #8190, the port status for some controllers + * will be wrong without a delay. At their wrong status, the port + * is enabled, but not suspended neither resumed. + */ + i = HCS_N_PORTS(ehci->hcs_params); + while (i--) { + temp = ehci_readl(ehci, &ehci->regs->port_status[i]); + if ((temp & PORT_PE) && + !(temp & (PORT_SUSPEND | PORT_RESUME))) { + ehci_dbg(ehci, "Port status(0x%x) is wrong\n", temp); + spin_unlock_irq(&ehci->lock); + msleep(8); + spin_lock_irq(&ehci->lock); + break; + } + } + if (ehci->shutdown) goto shutdown; @@ -623,7 +649,11 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) status = STS_PCD; } } - /* FIXME autosuspend idle root hubs */ + + /* If a resume is in progress, make sure it can finish */ + if (ehci->resuming_ports) + mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(25)); + spin_unlock_irqrestore (&ehci->lock, flags); return status ? retval : 0; } @@ -764,11 +794,6 @@ static int ehci_hub_control ( status_reg); break; case USB_PORT_FEAT_C_CONNECTION: - if (ehci->has_lpm) { - /* clear PORTSC bits on disconnect */ - temp &= ~PORT_LPM; - temp &= ~PORT_DEV_ADDR; - } ehci_writel(ehci, temp | PORT_CSC, status_reg); break; case USB_PORT_FEAT_C_OVER_CURRENT: @@ -830,6 +855,7 @@ static int ehci_hub_control ( /* resume signaling for 20 msec */ ehci->reset_done[wIndex] = jiffies + msecs_to_jiffies(20); + usb_hcd_start_port_resume(&hcd->self, wIndex); /* check the port again */ mod_timer(&ehci_to_hcd(ehci)->rh_timer, ehci->reset_done[wIndex]); @@ -841,6 +867,7 @@ static int ehci_hub_control ( clear_bit(wIndex, &ehci->suspended_ports); set_bit(wIndex, &ehci->port_c_suspend); ehci->reset_done[wIndex] = 0; + usb_hcd_end_port_resume(&hcd->self, wIndex); /* stop resume signaling */ temp = ehci_readl(ehci, status_reg); @@ -929,6 +956,7 @@ static int ehci_hub_control ( ehci->reset_done[wIndex] = 0; if (temp & PORT_PE) set_bit(wIndex, &ehci->port_c_suspend); + usb_hcd_end_port_resume(&hcd->self, wIndex); } if (temp & PORT_OC) @@ -1088,8 +1116,7 @@ error_exit: return retval; } -static void __maybe_unused ehci_relinquish_port(struct usb_hcd *hcd, - int portnum) +static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); @@ -1098,8 +1125,7 @@ static void __maybe_unused ehci_relinquish_port(struct usb_hcd *hcd, set_owner(ehci, --portnum, PORT_OWNER); } -static int __maybe_unused ehci_port_handed_over(struct usb_hcd *hcd, - int portnum) +static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); u32 __iomem *reg; diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c deleted file mode 100644 index f224c0a48be..00000000000 --- a/drivers/usb/host/ehci-ixp4xx.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * IXP4XX EHCI Host Controller Driver - * - * Author: Vladimir Barinov <vbarinov@embeddedalley.com> - * - * Based on "ehci-fsl.c" by Randy Vinson <rvinson@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/platform_device.h> - -static int ixp4xx_ehci_init(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int retval = 0; - - ehci->big_endian_desc = 1; - ehci->big_endian_mmio = 1; - - ehci->caps = hcd->regs + 0x100; - - hcd->has_tt = 1; - - retval = ehci_setup(hcd); - if (retval) - return retval; - - ehci_port_power(ehci, 0); - - return retval; -} - -static const struct hc_driver ixp4xx_ehci_hc_driver = { - .description = hcd_name, - .product_desc = "IXP4XX EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - .reset = ixp4xx_ehci_init, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - .get_frame_number = ehci_get_frame, - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, -#if defined(CONFIG_PM) - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, -#endif - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - -static int ixp4xx_ehci_probe(struct platform_device *pdev) -{ - struct usb_hcd *hcd; - const struct hc_driver *driver = &ixp4xx_ehci_hc_driver; - struct resource *res; - int irq; - int retval; - - if (usb_disabled()) - return -ENODEV; - - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { - dev_err(&pdev->dev, - "Found HC with no IRQ. Check %s setup!\n", - dev_name(&pdev->dev)); - return -ENODEV; - } - irq = res->start; - - hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); - if (!hcd) { - retval = -ENOMEM; - goto fail_create_hcd; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, - "Found HC with no register addr. Check %s setup!\n", - dev_name(&pdev->dev)); - retval = -ENODEV; - goto fail_request_resource; - } - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - - hcd->regs = devm_request_and_ioremap(&pdev->dev, res); - if (hcd->regs == NULL) { - dev_dbg(&pdev->dev, "error mapping memory\n"); - retval = -EFAULT; - goto fail_request_resource; - } - - retval = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (retval) - goto fail_request_resource; - - return retval; - -fail_request_resource: - usb_put_hcd(hcd); -fail_create_hcd: - dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval); - return retval; -} - -static int ixp4xx_ehci_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_remove_hcd(hcd); - usb_put_hcd(hcd); - - return 0; -} - -MODULE_ALIAS("platform:ixp4xx-ehci"); - -static struct platform_driver ixp4xx_ehci_driver = { - .probe = ixp4xx_ehci_probe, - .remove = ixp4xx_ehci_remove, - .driver = { - .name = "ixp4xx-ehci", - }, -}; diff --git a/drivers/usb/host/ehci-lpm.c b/drivers/usb/host/ehci-lpm.c deleted file mode 100644 index 2111627a19d..00000000000 --- a/drivers/usb/host/ehci-lpm.c +++ /dev/null @@ -1,84 +0,0 @@ -/* ehci-lpm.c EHCI HCD LPM support code - * Copyright (c) 2008 - 2010, Intel Corporation. - * Author: Jacob Pan <jacob.jun.pan@intel.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* this file is part of ehci-hcd.c */ -static int __maybe_unused ehci_lpm_set_da(struct ehci_hcd *ehci, - int dev_addr, int port_num) -{ - u32 __iomem portsc; - - ehci_dbg(ehci, "set dev address %d for port %d\n", dev_addr, port_num); - if (port_num > HCS_N_PORTS(ehci->hcs_params)) { - ehci_dbg(ehci, "invalid port number %d\n", port_num); - return -ENODEV; - } - portsc = ehci_readl(ehci, &ehci->regs->port_status[port_num-1]); - portsc &= ~PORT_DEV_ADDR; - portsc |= dev_addr<<25; - ehci_writel(ehci, portsc, &ehci->regs->port_status[port_num-1]); - return 0; -} - -/* - * this function is used to check if the device support LPM - * if yes, mark the PORTSC register with PORT_LPM bit - */ -static int __maybe_unused ehci_lpm_check(struct ehci_hcd *ehci, int port) -{ - u32 __iomem *portsc ; - u32 val32; - int retval; - - portsc = &ehci->regs->port_status[port-1]; - val32 = ehci_readl(ehci, portsc); - if (!(val32 & PORT_DEV_ADDR)) { - ehci_dbg(ehci, "LPM: no device attached\n"); - return -ENODEV; - } - val32 |= PORT_LPM; - ehci_writel(ehci, val32, portsc); - msleep(5); - val32 |= PORT_SUSPEND; - ehci_dbg(ehci, "Sending LPM 0x%08x to port %d\n", val32, port); - ehci_writel(ehci, val32, portsc); - /* wait for ACK */ - msleep(10); - retval = handshake(ehci, &ehci->regs->port_status[port-1], PORT_SSTS, - PORTSC_SUSPEND_STS_ACK, 125); - dbg_port(ehci, "LPM", port, val32); - if (retval != -ETIMEDOUT) { - ehci_dbg(ehci, "LPM: device ACK for LPM\n"); - val32 |= PORT_LPM; - /* - * now device should be in L1 sleep, let's wake up the device - * so that we can complete enumeration. - */ - ehci_writel(ehci, val32, portsc); - msleep(10); - val32 |= PORT_RESUME; - ehci_writel(ehci, val32, portsc); - } else { - ehci_dbg(ehci, "LPM: device does not ACK, disable LPM %d\n", - retval); - val32 &= ~PORT_LPM; - retval = -ETIMEDOUT; - ehci_writel(ehci, val32, portsc); - } - - return retval; -} diff --git a/drivers/usb/host/ehci-ls1x.c b/drivers/usb/host/ehci-ls1x.c deleted file mode 100644 index ca759652626..00000000000 --- a/drivers/usb/host/ehci-ls1x.c +++ /dev/null @@ -1,147 +0,0 @@ -/* - * Bus Glue for Loongson LS1X built-in EHCI controller. - * - * Copyright (c) 2012 Zhang, Keguang <keguang.zhang@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - - -#include <linux/platform_device.h> - -static int ehci_ls1x_reset(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int ret; - - ehci->caps = hcd->regs; - - ret = ehci_setup(hcd); - if (ret) - return ret; - - ehci_port_power(ehci, 0); - - return 0; -} - -static const struct hc_driver ehci_ls1x_hc_driver = { - .description = hcd_name, - .product_desc = "LOONGSON1 EHCI", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - /* - * basic lifecycle operations - */ - .reset = ehci_ls1x_reset, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - -static int ehci_hcd_ls1x_probe(struct platform_device *pdev) -{ - struct usb_hcd *hcd; - struct resource *res; - int irq; - int ret; - - pr_debug("initializing loongson1 ehci USB Controller\n"); - - if (usb_disabled()) - return -ENODEV; - - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { - dev_err(&pdev->dev, - "Found HC with no IRQ. Check %s setup!\n", - dev_name(&pdev->dev)); - return -ENODEV; - } - irq = res->start; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, - "Found HC with no register addr. Check %s setup!\n", - dev_name(&pdev->dev)); - return -ENODEV; - } - - hcd = usb_create_hcd(&ehci_ls1x_hc_driver, &pdev->dev, - dev_name(&pdev->dev)); - if (!hcd) - return -ENOMEM; - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - - hcd->regs = devm_request_and_ioremap(&pdev->dev, res); - if (hcd->regs == NULL) { - dev_dbg(&pdev->dev, "error mapping memory\n"); - ret = -EFAULT; - goto err_put_hcd; - } - - ret = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (ret) - goto err_put_hcd; - - return ret; - -err_put_hcd: - usb_put_hcd(hcd); - return ret; -} - -static int ehci_hcd_ls1x_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_remove_hcd(hcd); - usb_put_hcd(hcd); - - return 0; -} - -static struct platform_driver ehci_ls1x_driver = { - .probe = ehci_hcd_ls1x_probe, - .remove = ehci_hcd_ls1x_remove, - .shutdown = usb_hcd_platform_shutdown, - .driver = { - .name = "ls1x-ehci", - .owner = THIS_MODULE, - }, -}; - -MODULE_ALIAS(PLATFORM_MODULE_PREFIX "ls1x-ehci"); diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c index 4af4dc5b618..88a49c87e74 100644 --- a/drivers/usb/host/ehci-msm.c +++ b/drivers/usb/host/ehci-msm.c @@ -53,7 +53,6 @@ static int ehci_msm_reset(struct usb_hcd *hcd) /* Disable streaming mode and select host mode */ writel(0x13, USB_USBMODE); - ehci_port_power(ehci, 1); return 0; } @@ -174,7 +173,7 @@ put_hcd: return ret; } -static int __devexit ehci_msm_remove(struct platform_device *pdev) +static int ehci_msm_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); @@ -221,7 +220,7 @@ static const struct dev_pm_ops ehci_msm_dev_pm_ops = { static struct platform_driver ehci_msm_driver = { .probe = ehci_msm_probe, - .remove = __devexit_p(ehci_msm_remove), + .remove = ehci_msm_remove, .driver = { .name = "msm_hsusb_host", .pm = &ehci_msm_dev_pm_ops, diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c index f7bfc0b898b..3065809546b 100644 --- a/drivers/usb/host/ehci-mv.c +++ b/drivers/usb/host/ehci-mv.c @@ -43,7 +43,7 @@ static void ehci_clock_enable(struct ehci_hcd_mv *ehci_mv) unsigned int i; for (i = 0; i < ehci_mv->clknum; i++) - clk_enable(ehci_mv->clk[i]); + clk_prepare_enable(ehci_mv->clk[i]); } static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv) @@ -51,7 +51,7 @@ static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv) unsigned int i; for (i = 0; i < ehci_mv->clknum; i++) - clk_disable(ehci_mv->clk[i]); + clk_disable_unprepare(ehci_mv->clk[i]); } static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv) @@ -302,7 +302,6 @@ static int mv_ehci_remove(struct platform_device *pdev) { struct ehci_hcd_mv *ehci_mv = platform_get_drvdata(pdev); struct usb_hcd *hcd = ehci_mv->hcd; - int clk_i; if (hcd->rh_registered) usb_remove_hcd(hcd); diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index 4a08fc0b27c..e9301fb97ea 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -17,84 +17,38 @@ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/io.h> #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> #include <linux/slab.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> -#include <mach/hardware.h> #include <linux/platform_data/usb-ehci-mxc.h> #include <asm/mach-types.h> +#include "ehci.h" + +#define DRIVER_DESC "Freescale On-Chip EHCI Host driver" + +static const char hcd_name[] = "ehci-mxc"; + #define ULPI_VIEWPORT_OFFSET 0x170 struct ehci_mxc_priv { struct clk *usbclk, *ahbclk, *phyclk; - struct usb_hcd *hcd; }; -/* called during probe() after chip reset completes */ -static int ehci_mxc_setup(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int retval; +static struct hc_driver __read_mostly ehci_mxc_hc_driver; - hcd->has_tt = 1; - - retval = ehci_setup(hcd); - if (retval) - return retval; - - ehci_port_power(ehci, 0); - return 0; -} - -static const struct hc_driver ehci_mxc_hc_driver = { - .description = hcd_name, - .product_desc = "Freescale On-Chip EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_USB2 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .reset = ehci_mxc_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +static const struct ehci_driver_overrides ehci_mxc_overrides __initdata = { + .extra_priv_size = sizeof(struct ehci_mxc_priv), }; static int ehci_mxc_drv_probe(struct platform_device *pdev) @@ -103,7 +57,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) struct usb_hcd *hcd; struct resource *res; int irq, ret; - unsigned int flags; struct ehci_mxc_priv *priv; struct device *dev = &pdev->dev; struct ehci_hcd *ehci; @@ -121,12 +74,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) if (!hcd) return -ENOMEM; - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); - if (!priv) { - ret = -ENOMEM; - goto err_alloc; - } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(dev, "Found HC with no register addr. Check setup!\n"); @@ -137,13 +84,16 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - hcd->regs = devm_request_and_ioremap(&pdev->dev, res); - if (!hcd->regs) { - dev_err(dev, "error mapping memory\n"); - ret = -EFAULT; + hcd->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hcd->regs)) { + ret = PTR_ERR(hcd->regs); goto err_alloc; } + hcd->has_tt = 1; + ehci = hcd_to_ehci(hcd); + priv = (struct ehci_mxc_priv *) ehci->priv; + /* enable clocks */ priv->usbclk = devm_clk_get(&pdev->dev, "ipg"); if (IS_ERR(priv->usbclk)) { @@ -178,8 +128,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) mdelay(10); } - ehci = hcd_to_ehci(hcd); - /* EHCI registers start at offset 0x100 */ ehci->caps = hcd->regs + 0x100; ehci->regs = hcd->regs + 0x100 + @@ -207,32 +155,12 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) } } - priv->hcd = hcd; - platform_set_drvdata(pdev, priv); + platform_set_drvdata(pdev, hcd); ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) goto err_add; - if (pdata->otg) { - /* - * efikamx and efikasb have some hardware bug which is - * preventing usb to work unless CHRGVBUS is set. - * It's in violation of USB specs - */ - if (machine_is_mx51_efikamx() || machine_is_mx51_efikasb()) { - flags = usb_phy_io_read(pdata->otg, - ULPI_OTG_CTRL); - flags |= ULPI_OTG_CTRL_CHRGVBUS; - ret = usb_phy_io_write(pdata->otg, flags, - ULPI_OTG_CTRL); - if (ret) { - dev_err(dev, "unable to set CHRVBUS\n"); - goto err_add; - } - } - } - return 0; err_add: @@ -253,8 +181,11 @@ err_alloc: static int __exit ehci_mxc_drv_remove(struct platform_device *pdev) { struct mxc_usbh_platform_data *pdata = pdev->dev.platform_data; - struct ehci_mxc_priv *priv = platform_get_drvdata(pdev); - struct usb_hcd *hcd = priv->hcd; + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct ehci_mxc_priv *priv = (struct ehci_mxc_priv *) ehci->priv; + + usb_remove_hcd(hcd); if (pdata && pdata->exit) pdata->exit(pdev); @@ -262,23 +193,20 @@ static int __exit ehci_mxc_drv_remove(struct platform_device *pdev) if (pdata->otg) usb_phy_shutdown(pdata->otg); - usb_remove_hcd(hcd); - usb_put_hcd(hcd); - platform_set_drvdata(pdev, NULL); - clk_disable_unprepare(priv->usbclk); clk_disable_unprepare(priv->ahbclk); if (priv->phyclk) clk_disable_unprepare(priv->phyclk); + usb_put_hcd(hcd); + platform_set_drvdata(pdev, NULL); return 0; } static void ehci_mxc_drv_shutdown(struct platform_device *pdev) { - struct ehci_mxc_priv *priv = platform_get_drvdata(pdev); - struct usb_hcd *hcd = priv->hcd; + struct usb_hcd *hcd = platform_get_drvdata(pdev); if (hcd->driver->shutdown) hcd->driver->shutdown(hcd); @@ -288,9 +216,31 @@ MODULE_ALIAS("platform:mxc-ehci"); static struct platform_driver ehci_mxc_driver = { .probe = ehci_mxc_drv_probe, - .remove = __exit_p(ehci_mxc_drv_remove), + .remove = ehci_mxc_drv_remove, .shutdown = ehci_mxc_drv_shutdown, .driver = { .name = "mxc-ehci", }, }; + +static int __init ehci_mxc_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + + ehci_init_driver(&ehci_mxc_hc_driver, &ehci_mxc_overrides); + return platform_driver_register(&ehci_mxc_driver); +} +module_init(ehci_mxc_init); + +static void __exit ehci_mxc_cleanup(void) +{ + platform_driver_unregister(&ehci_mxc_driver); +} +module_exit(ehci_mxc_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Sascha Hauer"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/ehci-octeon.c b/drivers/usb/host/ehci-octeon.c index ba26957abf4..a89750fff4f 100644 --- a/drivers/usb/host/ehci-octeon.c +++ b/drivers/usb/host/ehci-octeon.c @@ -159,9 +159,6 @@ static int ehci_octeon_drv_probe(struct platform_device *pdev) platform_set_drvdata(pdev, hcd); - /* root ports should always stay powered */ - ehci_port_power(ehci, 1); - return 0; err3: ehci_octeon_stop(); diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index d7fe287d067..0555ee42d7c 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -39,12 +39,13 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/usb/ulpi.h> -#include <plat/usb.h> #include <linux/regulator/consumer.h> #include <linux/pm_runtime.h> #include <linux/gpio.h> #include <linux/clk.h> +#include <linux/platform_data/usb-omap.h> + /* EHCI Register Set */ #define EHCI_INSNREG04 (0xA0) #define EHCI_INSNREG04_DISABLE_UNSUSPEND (1 << 5) @@ -106,7 +107,7 @@ static int omap_ehci_init(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); int rc; - struct ehci_hcd_omap_platform_data *pdata; + struct usbhs_omap_platform_data *pdata; pdata = hcd->self.controller->platform_data; @@ -146,14 +147,11 @@ static int omap_ehci_init(struct usb_hcd *hcd) gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1); } - /* root ports should always stay powered */ - ehci_port_power(ehci, 1); - return rc; } static void disable_put_regulator( - struct ehci_hcd_omap_platform_data *pdata) + struct usbhs_omap_platform_data *pdata) { int i; @@ -178,7 +176,7 @@ static void disable_put_regulator( static int ehci_hcd_omap_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct ehci_hcd_omap_platform_data *pdata = dev->platform_data; + struct usbhs_omap_platform_data *pdata = dev->platform_data; struct resource *res; struct usb_hcd *hcd; void __iomem *regs; @@ -290,7 +288,6 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct usb_hcd *hcd = dev_get_drvdata(dev); - struct ehci_hcd_omap_platform_data *pdata = dev->platform_data; usb_remove_hcd(hcd); disable_put_regulator(dev->platform_data); @@ -300,13 +297,6 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev) pm_runtime_put_sync(dev); pm_runtime_disable(dev); - if (pdata->phy_reset) { - if (gpio_is_valid(pdata->reset_gpio_port[0])) - gpio_free(pdata->reset_gpio_port[0]); - - if (gpio_is_valid(pdata->reset_gpio_port[1])) - gpio_free(pdata->reset_gpio_port[1]); - } return 0; } @@ -374,7 +364,7 @@ static const struct hc_driver ehci_omap_hc_driver = { .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; -MODULE_ALIAS("platform:omap-ehci"); +MODULE_ALIAS("platform:ehci-omap"); MODULE_AUTHOR("Texas Instruments, Inc."); MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>"); diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 9c2717d6673..914a3ecfb5d 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -14,6 +14,9 @@ #include <linux/mbus.h> #include <linux/clk.h> #include <linux/platform_data/usb-ehci-orion.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> #define rdl(off) __raw_readl(hcd->regs + (off)) #define wrl(off, val) __raw_writel((val), hcd->regs + (off)) @@ -101,20 +104,6 @@ static void orion_usb_phy_v1_setup(struct usb_hcd *hcd) wrl(USB_MODE, 0x13); } -static int ehci_orion_setup(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int retval; - - retval = ehci_setup(hcd); - if (retval) - return retval; - - ehci_port_power(ehci, 0); - - return retval; -} - static const struct hc_driver ehci_orion_hc_driver = { .description = hcd_name, .product_desc = "Marvell Orion EHCI", @@ -129,7 +118,7 @@ static const struct hc_driver ehci_orion_hc_driver = { /* * basic lifecycle operations */ - .reset = ehci_orion_setup, + .reset = ehci_setup, .start = ehci_run, .stop = ehci_stop, .shutdown = ehci_shutdown, @@ -160,7 +149,7 @@ static const struct hc_driver ehci_orion_hc_driver = { .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; -static void __devinit +static void ehci_orion_conf_mbus_windows(struct usb_hcd *hcd, const struct mbus_dram_target_info *dram) { @@ -181,7 +170,9 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd, } } -static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) +static u64 ehci_orion_dma_mask = DMA_BIT_MASK(32); + +static int ehci_orion_drv_probe(struct platform_device *pdev) { struct orion_ehci_data *pd = pdev->dev.platform_data; const struct mbus_dram_target_info *dram; @@ -191,13 +182,17 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) struct clk *clk; void __iomem *regs; int irq, err; + enum orion_ehci_phy_ver phy_version; if (usb_disabled()) return -ENODEV; pr_debug("Initializing Orion-SoC USB Host Controller\n"); - irq = platform_get_irq(pdev, 0); + if (pdev->dev.of_node) + irq = irq_of_parse_and_map(pdev->dev.of_node, 0); + else + irq = platform_get_irq(pdev, 0); if (irq <= 0) { dev_err(&pdev->dev, "Found HC with no IRQ. Check %s setup!\n", @@ -215,6 +210,14 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) goto err1; } + /* + * Right now device-tree probed devices don't get dma_mask + * set. Since shared usb code relies on it, set it here for + * now. Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &ehci_orion_dma_mask; + if (!request_mem_region(res->start, resource_size(res), ehci_orion_hc_driver.description)) { dev_dbg(&pdev->dev, "controller already in use\n"); @@ -262,7 +265,12 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) /* * setup Orion USB controller. */ - switch (pd->phy_version) { + if (pdev->dev.of_node) + phy_version = EHCI_PHY_NA; + else + phy_version = pd->phy_version; + + switch (phy_version) { case EHCI_PHY_NA: /* dont change USB phy settings */ break; case EHCI_PHY_ORION: @@ -317,9 +325,19 @@ static int __exit ehci_orion_drv_remove(struct platform_device *pdev) MODULE_ALIAS("platform:orion-ehci"); +static const struct of_device_id ehci_orion_dt_ids[] = { + { .compatible = "marvell,orion-ehci", }, + {}, +}; +MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids); + static struct platform_driver ehci_orion_driver = { .probe = ehci_orion_drv_probe, .remove = __exit_p(ehci_orion_drv_remove), .shutdown = usb_hcd_platform_shutdown, - .driver.name = "orion-ehci", + .driver = { + .name = "orion-ehci", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(ehci_orion_dt_ids), + }, }; diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 2cb7d370c4e..170b9399e09 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -18,9 +18,18 @@ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef CONFIG_PCI -#error "This file is PCI bus glue. CONFIG_PCI must be defined." -#endif +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +#include "ehci.h" +#include "pci-quirks.h" + +#define DRIVER_DESC "EHCI PCI platform driver" + +static const char hcd_name[] = "ehci-pci"; /* defined here to avoid adding to pci_ids.h for single instance use */ #define PCI_DEVICE_ID_INTEL_CE4100_USB 0x2e70 @@ -103,7 +112,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd) } break; case PCI_VENDOR_ID_INTEL: - ehci->fs_i_thresh = 1; if (pdev->device == PCI_DEVICE_ID_INTEL_CE4100_USB) hcd->has_tt = 1; break; @@ -192,6 +200,26 @@ static int ehci_pci_setup(struct usb_hcd *hcd) break; } + /* optional debug port, normally in the first BAR */ + temp = pci_find_capability(pdev, PCI_CAP_ID_DBG); + if (temp) { + pci_read_config_dword(pdev, temp, &temp); + temp >>= 16; + if (((temp >> 13) & 7) == 1) { + u32 hcs_params = ehci_readl(ehci, + &ehci->caps->hcs_params); + + temp &= 0x1fff; + ehci->debug = hcd->regs + temp; + temp = ehci_readl(ehci, &ehci->debug->control); + ehci_info(ehci, "debug port %d%s\n", + HCS_DEBUG_PORT(hcs_params), + (temp & DBGP_ENABLED) ? " IN USE" : ""); + if (!(temp & DBGP_ENABLED)) + ehci->debug = NULL; + } + } + retval = ehci_setup(hcd); if (retval) return retval; @@ -203,11 +231,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd) break; case PCI_VENDOR_ID_INTEL: ehci->need_io_watchdog = 0; - if (pdev->device == 0x0806 || pdev->device == 0x0811 - || pdev->device == 0x0829) { - ehci_info(ehci, "disable lpm for langwell/penwell\n"); - ehci->has_lpm = 0; - } break; case PCI_VENDOR_ID_NVIDIA: switch (pdev->device) { @@ -217,8 +240,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd) * devices with PPCD enabled. */ case 0x0d9d: - ehci_info(ehci, "disable lpm/ppcd for nvidia mcp89"); - ehci->has_lpm = 0; + ehci_info(ehci, "disable ppcd for nvidia mcp89\n"); ehci->has_ppcd = 0; ehci->command &= ~CMD_PPCEE; break; @@ -226,25 +248,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd) break; } - /* optional debug port, normally in the first BAR */ - temp = pci_find_capability(pdev, 0x0a); - if (temp) { - pci_read_config_dword(pdev, temp, &temp); - temp >>= 16; - if ((temp & (3 << 13)) == (1 << 13)) { - temp &= 0x1fff; - ehci->debug = hcd->regs + temp; - temp = ehci_readl(ehci, &ehci->debug->control); - ehci_info(ehci, "debug port %d%s\n", - HCS_DEBUG_PORT(ehci->hcs_params), - (temp & DBGP_ENABLED) - ? " IN USE" - : ""); - if (!(temp & DBGP_ENABLED)) - ehci->debug = NULL; - } - } - /* at least the Genesys GL880S needs fixup here */ temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params); temp &= 0x0f; @@ -304,7 +307,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd) ehci_warn(ehci, "selective suspend/wakeup unavailable\n"); #endif - ehci_port_power(ehci, 1); retval = ehci_pci_reinit(ehci, pdev); done: return retval; @@ -323,18 +325,14 @@ done: * Also they depend on separate root hub suspend/resume. */ -static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) -{ - return ehci_suspend(hcd, do_wakeup); -} - static bool usb_is_intel_switchable_ehci(struct pci_dev *pdev) { return pdev->class == PCI_CLASS_SERIAL_USB_EHCI && pdev->vendor == PCI_VENDOR_ID_INTEL && (pdev->device == 0x1E26 || pdev->device == 0x8C2D || - pdev->device == 0x8C26); + pdev->device == 0x8C26 || + pdev->device == 0x9C26); } static void ehci_enable_xhci_companion(void) @@ -378,76 +376,17 @@ static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated) (void) ehci_pci_reinit(ehci, pdev); return 0; } -#endif -static int ehci_update_device(struct usb_hcd *hcd, struct usb_device *udev) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int rc = 0; - - if (!udev->parent) /* udev is root hub itself, impossible */ - rc = -1; - /* we only support lpm device connected to root hub yet */ - if (ehci->has_lpm && !udev->parent->parent) { - rc = ehci_lpm_set_da(ehci, udev->devnum, udev->portnum); - if (!rc) - rc = ehci_lpm_check(ehci, udev->portnum); - } - return rc; -} +#else -static const struct hc_driver ehci_pci_hc_driver = { - .description = hcd_name, - .product_desc = "EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), +#define ehci_suspend NULL +#define ehci_pci_resume NULL +#endif /* CONFIG_PM */ - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, +static struct hc_driver __read_mostly ehci_pci_hc_driver; - /* - * basic lifecycle operations - */ +static const struct ehci_driver_overrides pci_overrides __initdata = { .reset = ehci_pci_setup, - .start = ehci_run, -#ifdef CONFIG_PM - .pci_suspend = ehci_pci_suspend, - .pci_resume = ehci_pci_resume, -#endif - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - /* - * call back when device connected and addressed - */ - .update_device = ehci_update_device, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; /*-------------------------------------------------------------------------*/ @@ -480,3 +419,31 @@ static struct pci_driver ehci_pci_driver = { }, #endif }; + +static int __init ehci_pci_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + + ehci_init_driver(&ehci_pci_hc_driver, &pci_overrides); + + /* Entries for the PCI suspend/resume callbacks are special */ + ehci_pci_hc_driver.pci_suspend = ehci_suspend; + ehci_pci_hc_driver.pci_resume = ehci_pci_resume; + + return pci_register_driver(&ehci_pci_driver); +} +module_init(ehci_pci_init); + +static void __exit ehci_pci_cleanup(void) +{ + pci_unregister_driver(&ehci_pci_driver); +} +module_exit(ehci_pci_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("David Brownell"); +MODULE_AUTHOR("Alan Stern"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index 764e0100b6f..ca750639054 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -18,9 +18,22 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/hrtimer.h> +#include <linux/io.h> +#include <linux/module.h> #include <linux/platform_device.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> #include <linux/usb/ehci_pdriver.h> +#include "ehci.h" + +#define DRIVER_DESC "EHCI generic platform driver" + +static const char hcd_name[] = "ehci-platform"; + static int ehci_platform_reset(struct usb_hcd *hcd) { struct platform_device *pdev = to_platform_device(hcd->self.controller); @@ -38,47 +51,18 @@ static int ehci_platform_reset(struct usb_hcd *hcd) if (retval) return retval; - if (pdata->port_power_on) - ehci_port_power(ehci, 1); - if (pdata->port_power_off) - ehci_port_power(ehci, 0); - + if (pdata->no_io_watchdog) + ehci->need_io_watchdog = 0; return 0; } -static const struct hc_driver ehci_platform_hc_driver = { - .description = hcd_name, - .product_desc = "Generic Platform EHCI Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - .reset = ehci_platform_reset, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, +static struct hc_driver __read_mostly ehci_platform_hc_driver; - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - .get_frame_number = ehci_get_frame, - - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, -#if defined(CONFIG_PM) - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, -#endif - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +static const struct ehci_driver_overrides platform_overrides __initdata = { + .reset = ehci_platform_reset, }; -static int __devinit ehci_platform_probe(struct platform_device *dev) +static int ehci_platform_probe(struct platform_device *dev) { struct usb_hcd *hcd; struct resource *res_mem; @@ -96,12 +80,12 @@ static int __devinit ehci_platform_probe(struct platform_device *dev) irq = platform_get_irq(dev, 0); if (irq < 0) { - pr_err("no irq provided"); + dev_err(&dev->dev, "no irq provided"); return irq; } res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); if (!res_mem) { - pr_err("no memory recourse provided"); + dev_err(&dev->dev, "no memory resource provided"); return -ENXIO; } @@ -121,29 +105,19 @@ static int __devinit ehci_platform_probe(struct platform_device *dev) hcd->rsrc_start = res_mem->start; hcd->rsrc_len = resource_size(res_mem); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - pr_err("controller already in use"); - err = -EBUSY; + hcd->regs = devm_ioremap_resource(&dev->dev, res_mem); + if (IS_ERR(hcd->regs)) { + err = PTR_ERR(hcd->regs); goto err_put_hcd; } - - hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - err = -ENOMEM; - goto err_release_region; - } err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) - goto err_iounmap; + goto err_put_hcd; platform_set_drvdata(dev, hcd); return err; -err_iounmap: - iounmap(hcd->regs); -err_release_region: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err_put_hcd: usb_put_hcd(hcd); err_power: @@ -153,14 +127,12 @@ err_power: return err; } -static int __devexit ehci_platform_remove(struct platform_device *dev) +static int ehci_platform_remove(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); struct usb_ehci_pdata *pdata = dev->dev.platform_data; usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); platform_set_drvdata(dev, NULL); @@ -225,7 +197,7 @@ static const struct dev_pm_ops ehci_platform_pm_ops = { static struct platform_driver ehci_platform_driver = { .id_table = ehci_platform_table, .probe = ehci_platform_probe, - .remove = __devexit_p(ehci_platform_remove), + .remove = ehci_platform_remove, .shutdown = usb_hcd_platform_shutdown, .driver = { .owner = THIS_MODULE, @@ -233,3 +205,26 @@ static struct platform_driver ehci_platform_driver = { .pm = &ehci_platform_pm_ops, } }; + +static int __init ehci_platform_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + + ehci_init_driver(&ehci_platform_hc_driver, &platform_overrides); + return platform_driver_register(&ehci_platform_driver); +} +module_init(ehci_platform_init); + +static void __exit ehci_platform_cleanup(void) +{ + platform_driver_unregister(&ehci_platform_driver); +} +module_exit(ehci_platform_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Hauke Mehrtens"); +MODULE_AUTHOR("Alan Stern"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/ehci-pmcmsp.c b/drivers/usb/host/ehci-pmcmsp.c index 087aee2a904..363890ee41d 100644 --- a/drivers/usb/host/ehci-pmcmsp.c +++ b/drivers/usb/host/ehci-pmcmsp.c @@ -90,7 +90,6 @@ static int ehci_msp_setup(struct usb_hcd *hcd) return retval; usb_hcd_tdi_set_mode(ehci); - ehci_port_power(ehci, 0); return retval; } diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c index fa937d05a02..56dc732bf45 100644 --- a/drivers/usb/host/ehci-ppc-of.c +++ b/drivers/usb/host/ehci-ppc-of.c @@ -12,6 +12,7 @@ * This file is licenced under the GPL. */ +#include <linux/err.h> #include <linux/signal.h> #include <linux/of.h> @@ -71,7 +72,7 @@ static const struct hc_driver ehci_ppc_of_hc_driver = { * Fix: Enable Break Memory Transfer (BMT) in INSNREG3 */ #define PPC440EPX_EHCI0_INSREG_BMT (0x1 << 0) -static int __devinit +static int ppc44x_enable_bmt(struct device_node *dn) { __iomem u32 *insreg_virt; @@ -87,7 +88,7 @@ ppc44x_enable_bmt(struct device_node *dn) } -static int __devinit ehci_hcd_ppc_of_probe(struct platform_device *op) +static int ehci_hcd_ppc_of_probe(struct platform_device *op) { struct device_node *dn = op->dev.of_node; struct usb_hcd *hcd; @@ -121,10 +122,9 @@ static int __devinit ehci_hcd_ppc_of_probe(struct platform_device *op) goto err_irq; } - hcd->regs = devm_request_and_ioremap(&op->dev, &res); - if (!hcd->regs) { - pr_err("%s: devm_request_and_ioremap failed\n", __FILE__); - rv = -ENOMEM; + hcd->regs = devm_ioremap_resource(&op->dev, &res); + if (IS_ERR(hcd->regs)) { + rv = PTR_ERR(hcd->regs); goto err_ioremap; } diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c index 45a356e9f13..df5925a4f0d 100644 --- a/drivers/usb/host/ehci-ps3.c +++ b/drivers/usb/host/ehci-ps3.c @@ -93,7 +93,7 @@ static const struct hc_driver ps3_ehci_hc_driver = { .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; -static int __devinit ps3_ehci_probe(struct ps3_system_bus_device *dev) +static int ps3_ehci_probe(struct ps3_system_bus_device *dev) { int result; struct usb_hcd *hcd; diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 4b66374bdc8..5464665f0b6 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -135,7 +135,7 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh) * qtd is updated in qh_completions(). Update the QH * overlay here. */ - if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) { + if (qh->hw->hw_token & ACTIVE_BIT(ehci)) { qh->hw->hw_qtd_next = qtd->hw_next; qtd = NULL; } @@ -264,15 +264,9 @@ ehci_urb_done(struct ehci_hcd *ehci, struct urb *urb, int status) __releases(ehci->lock) __acquires(ehci->lock) { - if (likely (urb->hcpriv != NULL)) { - struct ehci_qh *qh = (struct ehci_qh *) urb->hcpriv; - - /* S-mask in a QH means it's an interrupt urb */ - if ((qh->hw->hw_info2 & cpu_to_hc32(ehci, QH_SMASK)) != 0) { - - /* ... update hc-wide periodic stats (for usbfs) */ - ehci_to_hcd(ehci)->self.bandwidth_int_reqs--; - } + if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { + /* ... update hc-wide periodic stats */ + ehci_to_hcd(ehci)->self.bandwidth_int_reqs--; } if (unlikely(urb->unlinked)) { @@ -455,11 +449,19 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) else if (last_status == -EINPROGRESS && !urb->unlinked) continue; - /* qh unlinked; token in overlay may be most current */ - if (state == QH_STATE_IDLE - && cpu_to_hc32(ehci, qtd->qtd_dma) - == hw->hw_current) { + /* + * If this was the active qtd when the qh was unlinked + * and the overlay's token is active, then the overlay + * hasn't been written back to the qtd yet so use its + * token instead of the qtd's. After the qtd is + * processed and removed, the overlay won't be valid + * any more. + */ + if (state == QH_STATE_IDLE && + qh->qtd_list.next == &qtd->qtd_list && + (hw->hw_token & ACTIVE_BIT(ehci))) { token = hc32_to_cpu(ehci, hw->hw_token); + hw->hw_token &= ~ACTIVE_BIT(ehci); /* An unlink may leave an incomplete * async transaction in the TT buffer. @@ -1176,7 +1178,7 @@ static void single_unlink_async(struct ehci_hcd *ehci, struct ehci_qh *qh) struct ehci_qh *prev; /* Add to the end of the list of QHs waiting for the next IAAD */ - qh->qh_state = QH_STATE_UNLINK; + qh->qh_state = QH_STATE_UNLINK_WAIT; if (ehci->async_unlink) ehci->async_unlink_last->unlink_next = qh; else @@ -1203,17 +1205,36 @@ static void start_iaa_cycle(struct ehci_hcd *ehci, bool nested) if (ehci->async_iaa || ehci->async_unlinking) return; - /* Do all the waiting QHs at once */ - ehci->async_iaa = ehci->async_unlink; - ehci->async_unlink = NULL; - /* If the controller isn't running, we don't have to wait for it */ if (unlikely(ehci->rh_state < EHCI_RH_RUNNING)) { + + /* Do all the waiting QHs */ + ehci->async_iaa = ehci->async_unlink; + ehci->async_unlink = NULL; + if (!nested) /* Avoid recursion */ end_unlink_async(ehci); /* Otherwise start a new IAA cycle */ } else if (likely(ehci->rh_state == EHCI_RH_RUNNING)) { + struct ehci_qh *qh; + + /* Do only the first waiting QH (nVidia bug?) */ + qh = ehci->async_unlink; + + /* + * Intel (?) bug: The HC can write back the overlay region + * even after the IAA interrupt occurs. In self-defense, + * always go through two IAA cycles for each QH. + */ + if (qh->qh_state == QH_STATE_UNLINK_WAIT) { + qh->qh_state = QH_STATE_UNLINK; + } else { + ehci->async_iaa = qh; + ehci->async_unlink = qh->unlink_next; + qh->unlink_next = NULL; + } + /* Make sure the unlinks are all visible to the hardware */ wmb(); @@ -1261,34 +1282,35 @@ static void end_unlink_async(struct ehci_hcd *ehci) } } +static void start_unlink_async(struct ehci_hcd *ehci, struct ehci_qh *qh); + static void unlink_empty_async(struct ehci_hcd *ehci) { - struct ehci_qh *qh, *next; - bool stopped = (ehci->rh_state < EHCI_RH_RUNNING); + struct ehci_qh *qh; + struct ehci_qh *qh_to_unlink = NULL; bool check_unlinks_later = false; + int count = 0; - /* Unlink all the async QHs that have been empty for a timer cycle */ - next = ehci->async->qh_next.qh; - while (next) { - qh = next; - next = qh->qh_next.qh; - + /* Find the last async QH which has been empty for a timer cycle */ + for (qh = ehci->async->qh_next.qh; qh; qh = qh->qh_next.qh) { if (list_empty(&qh->qtd_list) && qh->qh_state == QH_STATE_LINKED) { - if (!stopped && qh->unlink_cycle == - ehci->async_unlink_cycle) + ++count; + if (qh->unlink_cycle == ehci->async_unlink_cycle) check_unlinks_later = true; else - single_unlink_async(ehci, qh); + qh_to_unlink = qh; } } - /* Start a new IAA cycle if any QHs are waiting for it */ - if (ehci->async_unlink) - start_iaa_cycle(ehci, false); + /* If nothing else is being unlinked, unlink the last empty QH */ + if (!ehci->async_iaa && !ehci->async_unlink && qh_to_unlink) { + start_unlink_async(ehci, qh_to_unlink); + --count; + } - /* QHs that haven't been empty for long enough will be handled later */ - if (check_unlinks_later) { + /* Other QHs will be handled later */ + if (count > 0) { ehci_enable_event(ehci, EHCI_HRTIMER_ASYNC_UNLINKS, true); ++ehci->async_unlink_cycle; } diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index 85b74be202e..20ebf6a8b7f 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -17,6 +17,8 @@ #include <linux/platform_device.h> #include <linux/of_gpio.h> #include <linux/platform_data/usb-ehci-s5p.h> +#include <linux/usb/phy.h> +#include <linux/usb/samsung_usb_phy.h> #include <plat/usb-phy.h> #define EHCI_INSNREG00(base) (base + 0x90) @@ -32,6 +34,9 @@ struct s5p_ehci_hcd { struct device *dev; struct usb_hcd *hcd; struct clk *clk; + struct usb_phy *phy; + struct usb_otg *otg; + struct s5p_ehci_platdata *pdata; }; static const struct hc_driver s5p_ehci_hc_driver = { @@ -65,6 +70,26 @@ static const struct hc_driver s5p_ehci_hc_driver = { .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; +static void s5p_ehci_phy_enable(struct s5p_ehci_hcd *s5p_ehci) +{ + struct platform_device *pdev = to_platform_device(s5p_ehci->dev); + + if (s5p_ehci->phy) + usb_phy_init(s5p_ehci->phy); + else if (s5p_ehci->pdata->phy_init) + s5p_ehci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST); +} + +static void s5p_ehci_phy_disable(struct s5p_ehci_hcd *s5p_ehci) +{ + struct platform_device *pdev = to_platform_device(s5p_ehci->dev); + + if (s5p_ehci->phy) + usb_phy_shutdown(s5p_ehci->phy); + else if (s5p_ehci->pdata->phy_exit) + s5p_ehci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST); +} + static void s5p_setup_vbus_gpio(struct platform_device *pdev) { int err; @@ -85,22 +110,17 @@ static void s5p_setup_vbus_gpio(struct platform_device *pdev) static u64 ehci_s5p_dma_mask = DMA_BIT_MASK(32); -static int __devinit s5p_ehci_probe(struct platform_device *pdev) +static int s5p_ehci_probe(struct platform_device *pdev) { - struct s5p_ehci_platdata *pdata; + struct s5p_ehci_platdata *pdata = pdev->dev.platform_data; struct s5p_ehci_hcd *s5p_ehci; struct usb_hcd *hcd; struct ehci_hcd *ehci; struct resource *res; + struct usb_phy *phy; int irq; int err; - pdata = pdev->dev.platform_data; - if (!pdata) { - dev_err(&pdev->dev, "No platform data defined\n"); - return -EINVAL; - } - /* * Right now device-tree probed devices don't get dma_mask set. * Since shared usb code relies on it, set it here for now. @@ -118,6 +138,20 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev) if (!s5p_ehci) return -ENOMEM; + phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(phy)) { + /* Fallback to pdata */ + if (!pdata) { + dev_warn(&pdev->dev, "no platform data or transceiver defined\n"); + return -EPROBE_DEFER; + } else { + s5p_ehci->pdata = pdata; + } + } else { + s5p_ehci->phy = phy; + s5p_ehci->otg = phy->otg; + } + s5p_ehci->dev = &pdev->dev; hcd = usb_create_hcd(&s5p_ehci_hc_driver, &pdev->dev, @@ -136,7 +170,7 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev) goto fail_clk; } - err = clk_enable(s5p_ehci->clk); + err = clk_prepare_enable(s5p_ehci->clk); if (err) goto fail_clk; @@ -163,8 +197,10 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev) goto fail_io; } - if (pdata->phy_init) - pdata->phy_init(pdev, S5P_USB_PHY_HOST); + if (s5p_ehci->otg) + s5p_ehci->otg->set_host(s5p_ehci->otg, &s5p_ehci->hcd->self); + + s5p_ehci_phy_enable(s5p_ehci); ehci = hcd_to_ehci(hcd); ehci->caps = hcd->regs; @@ -175,32 +211,35 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev) err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) { dev_err(&pdev->dev, "Failed to add USB HCD\n"); - goto fail_io; + goto fail_add_hcd; } platform_set_drvdata(pdev, s5p_ehci); return 0; +fail_add_hcd: + s5p_ehci_phy_disable(s5p_ehci); fail_io: - clk_disable(s5p_ehci->clk); + clk_disable_unprepare(s5p_ehci->clk); fail_clk: usb_put_hcd(hcd); return err; } -static int __devexit s5p_ehci_remove(struct platform_device *pdev) +static int s5p_ehci_remove(struct platform_device *pdev) { - struct s5p_ehci_platdata *pdata = pdev->dev.platform_data; struct s5p_ehci_hcd *s5p_ehci = platform_get_drvdata(pdev); struct usb_hcd *hcd = s5p_ehci->hcd; usb_remove_hcd(hcd); - if (pdata && pdata->phy_exit) - pdata->phy_exit(pdev, S5P_USB_PHY_HOST); + if (s5p_ehci->otg) + s5p_ehci->otg->set_host(s5p_ehci->otg, &s5p_ehci->hcd->self); - clk_disable(s5p_ehci->clk); + s5p_ehci_phy_disable(s5p_ehci); + + clk_disable_unprepare(s5p_ehci->clk); usb_put_hcd(hcd); @@ -222,16 +261,16 @@ static int s5p_ehci_suspend(struct device *dev) struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev); struct usb_hcd *hcd = s5p_ehci->hcd; bool do_wakeup = device_may_wakeup(dev); - struct platform_device *pdev = to_platform_device(dev); - struct s5p_ehci_platdata *pdata = pdev->dev.platform_data; int rc; rc = ehci_suspend(hcd, do_wakeup); - if (pdata && pdata->phy_exit) - pdata->phy_exit(pdev, S5P_USB_PHY_HOST); + if (s5p_ehci->otg) + s5p_ehci->otg->set_host(s5p_ehci->otg, &s5p_ehci->hcd->self); + + s5p_ehci_phy_disable(s5p_ehci); - clk_disable(s5p_ehci->clk); + clk_disable_unprepare(s5p_ehci->clk); return rc; } @@ -240,13 +279,13 @@ static int s5p_ehci_resume(struct device *dev) { struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev); struct usb_hcd *hcd = s5p_ehci->hcd; - struct platform_device *pdev = to_platform_device(dev); - struct s5p_ehci_platdata *pdata = pdev->dev.platform_data; - clk_enable(s5p_ehci->clk); + clk_prepare_enable(s5p_ehci->clk); + + if (s5p_ehci->otg) + s5p_ehci->otg->set_host(s5p_ehci->otg, &s5p_ehci->hcd->self); - if (pdata && pdata->phy_init) - pdata->phy_init(pdev, S5P_USB_PHY_HOST); + s5p_ehci_phy_enable(s5p_ehci); /* DMA burst Enable */ writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs)); @@ -266,7 +305,7 @@ static const struct dev_pm_ops s5p_ehci_pm_ops = { #ifdef CONFIG_OF static const struct of_device_id exynos_ehci_match[] = { - { .compatible = "samsung,exynos-ehci" }, + { .compatible = "samsung,exynos4210-ehci" }, {}, }; MODULE_DEVICE_TABLE(of, exynos_ehci_match); @@ -274,7 +313,7 @@ MODULE_DEVICE_TABLE(of, exynos_ehci_match); static struct platform_driver s5p_ehci_driver = { .probe = s5p_ehci_probe, - .remove = __devexit_p(s5p_ehci_remove), + .remove = s5p_ehci_remove, .shutdown = s5p_ehci_shutdown, .driver = { .name = "s5p-ehci", diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 7cf3da7babf..b476daf49f6 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -36,29 +36,6 @@ static int ehci_get_frame (struct usb_hcd *hcd); -#ifdef CONFIG_PCI - -static unsigned ehci_read_frame_index(struct ehci_hcd *ehci) -{ - unsigned uf; - - /* - * The MosChip MCS9990 controller updates its microframe counter - * a little before the frame counter, and occasionally we will read - * the invalid intermediate value. Avoid problems by checking the - * microframe number (the low-order 3 bits); if they are 0 then - * re-read the register to get the correct value. - */ - uf = ehci_readl(ehci, &ehci->regs->frame_index); - if (unlikely(ehci->frame_index_bug && ((uf & 7) == 0))) - uf = ehci_readl(ehci, &ehci->regs->frame_index); - return uf; -} - -#endif - -/*-------------------------------------------------------------------------*/ - /* * periodic_next_shadow - return "next" pointer on shadow list * @periodic: host pointer to qh/itd/sitd @@ -236,7 +213,7 @@ static inline unsigned char tt_start_uframe(struct ehci_hcd *ehci, __hc32 mask) } static const unsigned char -max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 }; +max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 125, 25 }; /* carryover low/fullspeed bandwidth that crosses uframe boundries */ static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8]) @@ -1361,7 +1338,7 @@ sitd_slot_ok ( * given EHCI_TUNE_FLS and the slop). Or, write a smarter scheduler! */ -#define SCHEDULE_SLOP 80 /* microframes */ +#define SCHEDULING_DELAY 40 /* microframes */ static int iso_stream_schedule ( @@ -1370,7 +1347,7 @@ iso_stream_schedule ( struct ehci_iso_stream *stream ) { - u32 now, next, start, period, span; + u32 now, base, next, start, period, span; int status; unsigned mod = ehci->periodic_size << 3; struct ehci_iso_sched *sched = urb->hcpriv; @@ -1382,62 +1359,72 @@ iso_stream_schedule ( span <<= 3; } - if (span > mod - SCHEDULE_SLOP) { - ehci_dbg (ehci, "iso request %p too long\n", urb); - status = -EFBIG; - goto fail; - } - now = ehci_read_frame_index(ehci) & (mod - 1); /* Typical case: reuse current schedule, stream is still active. * Hopefully there are no gaps from the host falling behind - * (irq delays etc), but if there are we'll take the next - * slot in the schedule, implicitly assuming URB_ISO_ASAP. + * (irq delays etc). If there are, the behavior depends on + * whether URB_ISO_ASAP is set. */ if (likely (!list_empty (&stream->td_list))) { - u32 excess; - /* For high speed devices, allow scheduling within the - * isochronous scheduling threshold. For full speed devices - * and Intel PCI-based controllers, don't (work around for - * Intel ICH9 bug). - */ - if (!stream->highspeed && ehci->fs_i_thresh) - next = now + ehci->i_thresh; + /* Take the isochronous scheduling threshold into account */ + if (ehci->i_thresh) + next = now + ehci->i_thresh; /* uframe cache */ else - next = now; + next = (now + 2 + 7) & ~0x07; /* full frame cache */ - /* Fell behind (by up to twice the slop amount)? - * We decide based on the time of the last currently-scheduled - * slot, not the time of the next available slot. + /* + * Use ehci->last_iso_frame as the base. There can't be any + * TDs scheduled for earlier than that. */ - excess = (stream->next_uframe - period - next) & (mod - 1); - if (excess >= mod - 2 * SCHEDULE_SLOP) - start = next + excess - mod + period * - DIV_ROUND_UP(mod - excess, period); - else - start = next + excess + period; - if (start - now >= mod) { - ehci_dbg(ehci, "request %p would overflow (%d+%d >= %d)\n", - urb, start - now - period, period, - mod); - status = -EFBIG; + base = ehci->last_iso_frame << 3; + next = (next - base) & (mod - 1); + start = (stream->next_uframe - base) & (mod - 1); + + /* Is the schedule already full? */ + if (unlikely(start < period)) { + ehci_dbg(ehci, "iso sched full %p (%u-%u < %u mod %u)\n", + urb, stream->next_uframe, base, + period, mod); + status = -ENOSPC; goto fail; } + + /* Behind the scheduling threshold? */ + if (unlikely(start < next)) { + + /* USB_ISO_ASAP: Round up to the first available slot */ + if (urb->transfer_flags & URB_ISO_ASAP) + start += (next - start + period - 1) & -period; + + /* + * Not ASAP: Use the next slot in the stream. If + * the entire URB falls before the threshold, fail. + */ + else if (start + span - period < next) { + ehci_dbg(ehci, "iso urb late %p (%u+%u < %u)\n", + urb, start + base, + span - period, next + base); + status = -EXDEV; + goto fail; + } + } + + start += base; } /* need to schedule; when's the next (u)frame we could start? * this is bigger than ehci->i_thresh allows; scheduling itself - * isn't free, the slop should handle reasonably slow cpus. it + * isn't free, the delay should handle reasonably slow cpus. it * can also help high bandwidth if the dma and irq loads don't * jump until after the queue is primed. */ else { int done = 0; - start = SCHEDULE_SLOP + (now & ~0x07); - /* NOTE: assumes URB_ISO_ASAP, to limit complexity/bugs */ + base = now & ~0x07; + start = base + SCHEDULING_DELAY; /* find a uframe slot with enough bandwidth. * Early uframes are more precious because full-speed @@ -1464,19 +1451,16 @@ iso_stream_schedule ( /* no room in the schedule */ if (!done) { - ehci_dbg(ehci, "iso resched full %p (now %d max %d)\n", - urb, now, now + mod); + ehci_dbg(ehci, "iso sched full %p", urb); status = -ENOSPC; goto fail; } } /* Tried to schedule too far into the future? */ - if (unlikely(start - now + span - period - >= mod - 2 * SCHEDULE_SLOP)) { - ehci_dbg(ehci, "request %p would overflow (%d+%d >= %d)\n", - urb, start - now, span - period, - mod - 2 * SCHEDULE_SLOP); + if (unlikely(start - base + span - period >= mod)) { + ehci_dbg(ehci, "request %p would overflow (%u+%u >= %u)\n", + urb, start - base, span - period, mod); status = -EFBIG; goto fail; } @@ -1490,7 +1474,7 @@ iso_stream_schedule ( /* Make sure scan_isoc() sees these */ if (ehci->isoc_count == 0) - ehci->next_frame = now >> 3; + ehci->last_iso_frame = now >> 3; return 0; fail: @@ -1646,7 +1630,7 @@ static void itd_link_urb( /* don't need that schedule data any more */ iso_sched_free (stream, iso_sched); - urb->hcpriv = NULL; + urb->hcpriv = stream; ++ehci->isoc_count; enable_periodic(ehci); @@ -1708,7 +1692,7 @@ static bool itd_complete(struct ehci_hcd *ehci, struct ehci_itd *itd) urb->actual_length += desc->actual_length; } else { /* URB was too late */ - desc->status = -EXDEV; + urb->error_count++; } } @@ -2045,7 +2029,7 @@ static void sitd_link_urb( /* don't need that schedule data any more */ iso_sched_free (stream, sched); - urb->hcpriv = NULL; + urb->hcpriv = stream; ++ehci->isoc_count; enable_periodic(ehci); @@ -2081,7 +2065,7 @@ static bool sitd_complete(struct ehci_hcd *ehci, struct ehci_sitd *sitd) t = hc32_to_cpup(ehci, &sitd->hw_results); /* report transfer status */ - if (t & SITD_ERRS) { + if (unlikely(t & SITD_ERRS)) { urb->error_count++; if (t & SITD_STS_DBE) desc->status = usb_pipein (urb->pipe) @@ -2091,6 +2075,9 @@ static bool sitd_complete(struct ehci_hcd *ehci, struct ehci_sitd *sitd) desc->status = -EOVERFLOW; else /* XACT, MMF, etc */ desc->status = -EPROTO; + } else if (unlikely(t & SITD_STS_ACTIVE)) { + /* URB was too late */ + urb->error_count++; } else { desc->status = 0; desc->actual_length = desc->length - SITD_LENGTH(t); @@ -2220,12 +2207,12 @@ static void scan_isoc(struct ehci_hcd *ehci) now_frame = (uf >> 3) & fmask; live = true; } else { - now_frame = (ehci->next_frame - 1) & fmask; + now_frame = (ehci->last_iso_frame - 1) & fmask; live = false; } ehci->now_frame = now_frame; - frame = ehci->next_frame; + frame = ehci->last_iso_frame; for (;;) { union ehci_shadow q, *q_p; __hc32 type, *hw_p; @@ -2334,7 +2321,9 @@ restart: /* Stop when we have reached the current frame */ if (frame == now_frame) break; + + /* The last frame may still have active siTDs */ + ehci->last_iso_frame = frame; frame = (frame + 1) & fmask; } - ehci->next_frame = now_frame; } diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c index efad02d947f..f55477c5a1b 100644 --- a/drivers/usb/host/ehci-sead3.c +++ b/drivers/usb/host/ehci-sead3.c @@ -19,6 +19,7 @@ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/err.h> #include <linux/platform_device.h> static int ehci_sead3_setup(struct usb_hcd *hcd) @@ -112,10 +113,9 @@ static int ehci_hcd_sead3_drv_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - hcd->regs = devm_request_and_ioremap(&pdev->dev, res); - if (!hcd->regs) { - pr_debug("ioremap failed"); - ret = -ENOMEM; + hcd->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hcd->regs)) { + ret = PTR_ERR(hcd->regs); goto err1; } diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c index 6081e1ed3ac..3565a300f40 100644 --- a/drivers/usb/host/ehci-sh.c +++ b/drivers/usb/host/ehci-sh.c @@ -21,17 +21,10 @@ struct ehci_sh_priv { static int ehci_sh_reset(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int ret; ehci->caps = hcd->regs; - ret = ehci_setup(hcd); - if (unlikely(ret)) - return ret; - - ehci_port_power(ehci, 0); - - return ret; + return ehci_setup(hcd); } static const struct hc_driver ehci_sh_hc_driver = { @@ -125,10 +118,9 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - hcd->regs = devm_request_and_ioremap(&pdev->dev, res); - if (hcd->regs == NULL) { - dev_dbg(&pdev->dev, "error mapping memory\n"); - ret = -ENXIO; + hcd->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hcd->regs)) { + ret = PTR_ERR(hcd->regs); goto fail_request_resource; } diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c index c718a065e15..466c1bb5b96 100644 --- a/drivers/usb/host/ehci-spear.c +++ b/drivers/usb/host/ehci-spear.c @@ -37,18 +37,11 @@ static void spear_stop_ehci(struct spear_ehci *ehci) static int ehci_spear_setup(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int retval = 0; /* registers start at offset 0x0 */ ehci->caps = hcd->regs; - retval = ehci_setup(hcd); - if (retval) - return retval; - - ehci_port_power(ehci, 0); - - return retval; + return ehci_setup(hcd); } static const struct hc_driver ehci_spear_hc_driver = { @@ -116,8 +109,6 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) struct clk *usbh_clk; const struct hc_driver *driver = &ehci_spear_hc_driver; int irq, retval; - char clk_name[20] = "usbh_clk"; - static int instance = -1; if (usb_disabled()) return -ENODEV; @@ -125,7 +116,7 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) { retval = irq; - goto fail_irq_get; + goto fail; } /* @@ -136,47 +127,38 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &spear_ehci_dma_mask; - /* - * Increment the device instance, when probing via device-tree - */ - if (pdev->id < 0) - instance++; - else - instance = pdev->id; - sprintf(clk_name, "usbh.%01d_clk", instance); - - usbh_clk = clk_get(NULL, clk_name); + usbh_clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(usbh_clk)) { dev_err(&pdev->dev, "Error getting interface clock\n"); retval = PTR_ERR(usbh_clk); - goto fail_get_usbh_clk; + goto fail; } hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { retval = -ENOMEM; - goto fail_create_hcd; + goto fail; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { retval = -ENODEV; - goto fail_request_resource; + goto err_put_hcd; } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, + if (!devm_request_mem_region(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len, driver->description)) { retval = -EBUSY; - goto fail_request_resource; + goto err_put_hcd; } - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_ioremap(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len); if (hcd->regs == NULL) { dev_dbg(&pdev->dev, "error mapping memory\n"); retval = -ENOMEM; - goto fail_ioremap; + goto err_put_hcd; } ehci = (struct spear_ehci *)hcd_to_ehci(hcd); @@ -185,21 +167,15 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) spear_start_ehci(ehci); retval = usb_add_hcd(hcd, irq, IRQF_SHARED); if (retval) - goto fail_add_hcd; + goto err_stop_ehci; return retval; -fail_add_hcd: +err_stop_ehci: spear_stop_ehci(ehci); - iounmap(hcd->regs); -fail_ioremap: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -fail_request_resource: +err_put_hcd: usb_put_hcd(hcd); -fail_create_hcd: - clk_put(usbh_clk); -fail_get_usbh_clk: -fail_irq_get: +fail: dev_err(&pdev->dev, "init fail, %d\n", retval); return retval ; @@ -218,17 +194,12 @@ static int spear_ehci_hcd_drv_remove(struct platform_device *pdev) if (ehci_p->clk) spear_stop_ehci(ehci_p); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); - if (ehci_p->clk) - clk_put(ehci_p->clk); - return 0; } -static struct of_device_id spear_ehci_id_table[] __devinitdata = { +static struct of_device_id spear_ehci_id_table[] = { { .compatible = "st,spear600-ehci", }, { }, }; diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 6223d175784..568aecc7075 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -2,7 +2,7 @@ * EHCI-compliant USB host controller driver for NVIDIA Tegra SoCs * * Copyright (C) 2010 Google, Inc. - * Copyright (C) 2009 NVIDIA Corporation + * Copyright (C) 2009 - 2013 NVIDIA Corporation * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -26,9 +26,17 @@ #include <linux/of.h> #include <linux/of_gpio.h> #include <linux/pm_runtime.h> - +#include <linux/usb/ehci_def.h> #include <linux/usb/tegra_usb_phy.h> -#include <mach/iomap.h> + +#define TEGRA_USB_BASE 0xC5000000 +#define TEGRA_USB2_BASE 0xC5004000 +#define TEGRA_USB3_BASE 0xC5008000 + +/* PORTSC registers */ +#define TEGRA_USB_PORTSC1 0x184 +#define TEGRA_USB_PORTSC1_PTS(x) (((x) & 0x3) << 30) +#define TEGRA_USB_PORTSC1_PHCD (1 << 23) #define TEGRA_USB_DMA_ALIGN 32 @@ -36,10 +44,10 @@ struct tegra_ehci_hcd { struct ehci_hcd *ehci; struct tegra_usb_phy *phy; struct clk *clk; - struct clk *emc_clk; struct usb_phy *transceiver; int host_resumed; int port_resuming; + bool needs_double_reset; enum tegra_usb_phy_port_speed port_speed; }; @@ -47,9 +55,8 @@ static void tegra_ehci_power_up(struct usb_hcd *hcd) { struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); - clk_prepare_enable(tegra->emc_clk); clk_prepare_enable(tegra->clk); - usb_phy_set_suspend(&tegra->phy->u_phy, 0); + usb_phy_set_suspend(hcd->phy, 0); tegra->host_resumed = 1; } @@ -58,9 +65,8 @@ static void tegra_ehci_power_down(struct usb_hcd *hcd) struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); tegra->host_resumed = 0; - usb_phy_set_suspend(&tegra->phy->u_phy, 1); + usb_phy_set_suspend(hcd->phy, 1); clk_disable_unprepare(tegra->clk); - clk_disable_unprepare(tegra->emc_clk); } static int tegra_ehci_internal_port_reset( @@ -153,7 +159,7 @@ static int tegra_ehci_hub_control( if (tegra->port_resuming && !(temp & PORT_SUSPEND)) { /* Resume completed, re-enable disconnect detection */ tegra->port_resuming = 0; - tegra_usb_phy_postresume(tegra->phy); + tegra_usb_phy_postresume(hcd->phy); } } @@ -181,7 +187,7 @@ static int tegra_ehci_hub_control( } /* For USB1 port we need to issue Port Reset twice internally */ - if (tegra->phy->instance == 0 && + if (tegra->needs_double_reset && (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_RESET)) { spin_unlock_irqrestore(&ehci->lock, flags); return tegra_ehci_internal_port_reset(ehci, status_reg); @@ -206,7 +212,7 @@ static int tegra_ehci_hub_control( goto done; /* Disable disconnect detection during port resume */ - tegra_usb_phy_preresume(tegra->phy); + tegra_usb_phy_preresume(hcd->phy); ehci->reset_done[wIndex-1] = jiffies + msecs_to_jiffies(25); @@ -277,7 +283,6 @@ static void tegra_ehci_shutdown(struct usb_hcd *hcd) static int tegra_ehci_setup(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int retval; /* EHCI registers start at offset 0x100 */ ehci->caps = hcd->regs + 0x100; @@ -285,12 +290,7 @@ static int tegra_ehci_setup(struct usb_hcd *hcd) /* switch to host mode */ hcd->has_tt = 1; - retval = ehci_setup(hcd); - if (retval) - return retval; - - ehci_port_power(ehci, 1); - return retval; + return ehci_setup(hcd); } struct dma_aligned_buffer { @@ -476,7 +476,7 @@ static int controller_resume(struct device *dev) } /* Force the phy to keep data lines in suspend state */ - tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed); + tegra_ehci_phy_restore_start(hcd->phy, tegra->port_speed); /* Enable host mode */ tdi_reset(ehci); @@ -543,17 +543,17 @@ static int controller_resume(struct device *dev) } } - tegra_ehci_phy_restore_end(tegra->phy); + tegra_ehci_phy_restore_end(hcd->phy); goto done; restart: if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH) - tegra_ehci_phy_restore_end(tegra->phy); + tegra_ehci_phy_restore_end(hcd->phy); tegra_ehci_restart(hcd); done: - tegra_usb_phy_preresume(tegra->phy); + tegra_usb_phy_preresume(hcd->phy); tegra->port_resuming = 1; return 0; } @@ -607,6 +607,37 @@ static const struct dev_pm_ops tegra_ehci_pm_ops = { #endif +/* Bits of PORTSC1, which will get cleared by writing 1 into them */ +#define TEGRA_PORTSC1_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) + +void tegra_ehci_set_pts(struct usb_phy *x, u8 pts_val) +{ + unsigned long val; + struct usb_hcd *hcd = bus_to_hcd(x->otg->host); + void __iomem *base = hcd->regs; + + val = readl(base + TEGRA_USB_PORTSC1) & ~TEGRA_PORTSC1_RWC_BITS; + val &= ~TEGRA_USB_PORTSC1_PTS(3); + val |= TEGRA_USB_PORTSC1_PTS(pts_val & 3); + writel(val, base + TEGRA_USB_PORTSC1); +} +EXPORT_SYMBOL_GPL(tegra_ehci_set_pts); + +void tegra_ehci_set_phcd(struct usb_phy *x, bool enable) +{ + unsigned long val; + struct usb_hcd *hcd = bus_to_hcd(x->otg->host); + void __iomem *base = hcd->regs; + + val = readl(base + TEGRA_USB_PORTSC1) & ~TEGRA_PORTSC1_RWC_BITS; + if (enable) + val |= TEGRA_USB_PORTSC1_PHCD; + else + val &= ~TEGRA_USB_PORTSC1_PHCD; + writel(val, base + TEGRA_USB_PORTSC1); +} +EXPORT_SYMBOL_GPL(tegra_ehci_set_phcd); + static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32); static int tegra_ehci_probe(struct platform_device *pdev) @@ -618,6 +649,7 @@ static int tegra_ehci_probe(struct platform_device *pdev) int err = 0; int irq; int instance = pdev->id; + struct usb_phy *u_phy; pdata = pdev->dev.platform_data; if (!pdata) { @@ -659,15 +691,8 @@ static int tegra_ehci_probe(struct platform_device *pdev) if (err) goto fail_clk; - tegra->emc_clk = devm_clk_get(&pdev->dev, "emc"); - if (IS_ERR(tegra->emc_clk)) { - dev_err(&pdev->dev, "Can't get emc clock\n"); - err = PTR_ERR(tegra->emc_clk); - goto fail_emc_clk; - } - - clk_prepare_enable(tegra->emc_clk); - clk_set_rate(tegra->emc_clk, 400000000); + tegra->needs_double_reset = of_property_read_bool(pdev->dev.of_node, + "nvidia,needs-double-reset"); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -715,9 +740,19 @@ static int tegra_ehci_probe(struct platform_device *pdev) goto fail_io; } - usb_phy_init(&tegra->phy->u_phy); + hcd->phy = u_phy = &tegra->phy->u_phy; + usb_phy_init(hcd->phy); - err = usb_phy_set_suspend(&tegra->phy->u_phy, 0); + u_phy->otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg), + GFP_KERNEL); + if (!u_phy->otg) { + dev_err(&pdev->dev, "Failed to alloc memory for otg\n"); + err = -ENOMEM; + goto fail_io; + } + u_phy->otg->host = hcd_to_bus(hcd); + + err = usb_phy_set_suspend(hcd->phy, 0); if (err) { dev_err(&pdev->dev, "Failed to power on the phy\n"); goto fail; @@ -763,10 +798,8 @@ fail: if (!IS_ERR_OR_NULL(tegra->transceiver)) otg_set_host(tegra->transceiver->otg, NULL); #endif - usb_phy_shutdown(&tegra->phy->u_phy); + usb_phy_shutdown(hcd->phy); fail_io: - clk_disable_unprepare(tegra->emc_clk); -fail_emc_clk: clk_disable_unprepare(tegra->clk); fail_clk: usb_put_hcd(hcd); @@ -778,9 +811,6 @@ static int tegra_ehci_remove(struct platform_device *pdev) struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); - if (tegra == NULL || hcd == NULL) - return -EINVAL; - pm_runtime_get_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); @@ -790,15 +820,12 @@ static int tegra_ehci_remove(struct platform_device *pdev) otg_set_host(tegra->transceiver->otg, NULL); #endif + usb_phy_shutdown(hcd->phy); usb_remove_hcd(hcd); usb_put_hcd(hcd); - usb_phy_shutdown(&tegra->phy->u_phy); - clk_disable_unprepare(tegra->clk); - clk_disable_unprepare(tegra->emc_clk); - return 0; } @@ -811,7 +838,7 @@ static void tegra_ehci_hcd_shutdown(struct platform_device *pdev) hcd->driver->shutdown(hcd); } -static struct of_device_id tegra_ehci_of_match[] __devinitdata = { +static struct of_device_id tegra_ehci_of_match[] = { { .compatible = "nvidia,tegra20-ehci", }, { }, }; diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c index d3c9a3e397b..7ecf709610b 100644 --- a/drivers/usb/host/ehci-vt8500.c +++ b/drivers/usb/host/ehci-vt8500.c @@ -16,25 +16,10 @@ * */ +#include <linux/err.h> #include <linux/of.h> #include <linux/platform_device.h> -static int ehci_update_device(struct usb_hcd *hcd, struct usb_device *udev) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int rc = 0; - - if (!udev->parent) /* udev is root hub itself, impossible */ - rc = -1; - /* we only support lpm device connected to root hub yet */ - if (ehci->has_lpm && !udev->parent->parent) { - rc = ehci_lpm_set_da(ehci, udev->devnum, udev->portnum); - if (!rc) - rc = ehci_lpm_check(ehci, udev->portnum); - } - return rc; -} - static const struct hc_driver vt8500_ehci_hc_driver = { .description = hcd_name, .product_desc = "VT8500 EHCI", @@ -77,11 +62,6 @@ static const struct hc_driver vt8500_ehci_hc_driver = { .relinquish_port = ehci_relinquish_port, .port_handed_over = ehci_port_handed_over, - /* - * call back when device connected and addressed - */ - .update_device = ehci_update_device, - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; @@ -117,10 +97,9 @@ static int vt8500_ehci_drv_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - hcd->regs = devm_request_and_ioremap(&pdev->dev, res); - if (!hcd->regs) { - pr_debug("ioremap failed"); - ret = -ENOMEM; + hcd->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hcd->regs)) { + ret = PTR_ERR(hcd->regs); goto err1; } diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c index ec598082c14..59e0e24c753 100644 --- a/drivers/usb/host/ehci-w90x900.c +++ b/drivers/usb/host/ehci-w90x900.c @@ -13,12 +13,12 @@ #include <linux/platform_device.h> -/*ebable phy0 and phy1 for w90p910*/ +/* enable phy0 and phy1 for w90p910 */ #define ENPHY (0x01<<8) #define PHY0_CTR (0xA4) #define PHY1_CTR (0xA8) -static int __devinit usb_w90x900_probe(const struct hc_driver *driver, +static int usb_w90x900_probe(const struct hc_driver *driver, struct platform_device *pdev) { struct usb_hcd *hcd; @@ -147,7 +147,7 @@ static const struct hc_driver ehci_w90x900_hc_driver = { .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; -static int __devinit ehci_w90x900_probe(struct platform_device *pdev) +static int ehci_w90x900_probe(struct platform_device *pdev) { if (usb_disabled()) return -ENODEV; @@ -155,7 +155,7 @@ static int __devinit ehci_w90x900_probe(struct platform_device *pdev) return usb_w90x900_probe(&ehci_w90x900_hc_driver, pdev); } -static int __devexit ehci_w90x900_remove(struct platform_device *pdev) +static int ehci_w90x900_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); @@ -166,7 +166,7 @@ static int __devexit ehci_w90x900_remove(struct platform_device *pdev) static struct platform_driver ehci_hcd_w90x900_driver = { .probe = ehci_w90x900_probe, - .remove = __devexit_p(ehci_w90x900_remove), + .remove = ehci_w90x900_remove, .driver = { .name = "w90x900-ehci", .owner = THIS_MODULE, diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c index 6a3f921a5d7..d845e3bcfaf 100644 --- a/drivers/usb/host/ehci-xilinx-of.c +++ b/drivers/usb/host/ehci-xilinx-of.c @@ -25,6 +25,7 @@ * */ +#include <linux/err.h> #include <linux/signal.h> #include <linux/of.h> @@ -125,7 +126,7 @@ static const struct hc_driver ehci_xilinx_of_hc_driver = { * as HS only or HS/FS only, it checks the configuration in the device tree * entry, and sets an appropriate value for hcd->has_tt. */ -static int __devinit ehci_hcd_xilinx_of_probe(struct platform_device *op) +static int ehci_hcd_xilinx_of_probe(struct platform_device *op) { struct device_node *dn = op->dev.of_node; struct usb_hcd *hcd; @@ -159,10 +160,9 @@ static int __devinit ehci_hcd_xilinx_of_probe(struct platform_device *op) goto err_irq; } - hcd->regs = devm_request_and_ioremap(&op->dev, &res); - if (!hcd->regs) { - pr_err("%s: devm_request_and_ioremap failed\n", __FILE__); - rv = -ENOMEM; + hcd->regs = devm_ioremap_resource(&op->dev, &res); + if (IS_ERR(hcd->regs)) { + rv = PTR_ERR(hcd->regs); goto err_irq; } diff --git a/drivers/usb/host/ehci-xls.c b/drivers/usb/host/ehci-xls.c deleted file mode 100644 index 8dc6a22d90b..00000000000 --- a/drivers/usb/host/ehci-xls.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * EHCI HCD for Netlogic XLS processors. - * - * (C) Copyright 2011 Netlogic Microsystems Inc. - * - * Based on various ehci-*.c drivers - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#include <linux/platform_device.h> - -static int ehci_xls_setup(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - - ehci->caps = hcd->regs; - - return ehci_setup(hcd); -} - -int ehci_xls_probe_internal(const struct hc_driver *driver, - struct platform_device *pdev) -{ - struct usb_hcd *hcd; - struct resource *res; - int retval, irq; - - /* Get our IRQ from an earlier registered Platform Resource */ - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "Found HC with no IRQ. Check %s setup!\n", - dev_name(&pdev->dev)); - return -ENODEV; - } - - /* Get our Memory Handle */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Error: MMIO Handle %s setup!\n", - dev_name(&pdev->dev)); - return -ENODEV; - } - hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); - if (!hcd) { - retval = -ENOMEM; - goto err1; - } - - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, - driver->description)) { - dev_dbg(&pdev->dev, "controller already in use\n"); - retval = -EBUSY; - goto err2; - } - hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); - - if (hcd->regs == NULL) { - dev_dbg(&pdev->dev, "error mapping memory\n"); - retval = -EFAULT; - goto err3; - } - - retval = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (retval != 0) - goto err4; - return retval; - -err4: - iounmap(hcd->regs); -err3: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -err2: - usb_put_hcd(hcd); -err1: - dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), - retval); - return retval; -} - -static struct hc_driver ehci_xls_hc_driver = { - .description = hcd_name, - .product_desc = "XLS EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - .irq = ehci_irq, - .flags = HCD_USB2 | HCD_MEMORY, - .reset = ehci_xls_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - .get_frame_number = ehci_get_frame, - - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - -static int ehci_xls_probe(struct platform_device *pdev) -{ - if (usb_disabled()) - return -ENODEV; - - return ehci_xls_probe_internal(&ehci_xls_hc_driver, pdev); -} - -static int ehci_xls_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - usb_put_hcd(hcd); - return 0; -} - -MODULE_ALIAS("ehci-xls"); - -static struct platform_driver ehci_xls_driver = { - .probe = ehci_xls_probe, - .remove = ehci_xls_remove, - .shutdown = usb_hcd_platform_shutdown, - .driver = { - .name = "ehci-xls", - }, -}; diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index da07d98f7d1..36c3a821059 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -38,6 +38,10 @@ typedef __u16 __bitwise __hc16; #endif /* statistics can be kept for tuning/monitoring */ +#ifdef DEBUG +#define EHCI_STATS +#endif + struct ehci_stats { /* irq usage */ unsigned long normal; @@ -143,7 +147,7 @@ struct ehci_hcd { /* one per controller */ struct ehci_qh *intr_unlink_last; unsigned intr_unlink_cycle; unsigned now_frame; /* frame from HC hardware */ - unsigned next_frame; /* scan periodic, start here */ + unsigned last_iso_frame; /* last frame scanned for iso */ unsigned intr_count; /* intr activity count */ unsigned isoc_count; /* isoc activity count */ unsigned periodic_count; /* periodic activity count */ @@ -193,7 +197,6 @@ struct ehci_hcd { /* one per controller */ unsigned has_amcc_usb23:1; unsigned need_io_watchdog:1; unsigned amd_pll_fix:1; - unsigned fs_i_thresh:1; /* Intel iso scheduling */ unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/ unsigned has_synopsys_hc_bug:1; /* Synopsys HC */ unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */ @@ -207,7 +210,6 @@ struct ehci_hcd { /* one per controller */ #define OHCI_HCCTRL_LEN 0x4 __hc32 *ohci_hcctrl_reg; unsigned has_hostpc:1; - unsigned has_lpm:1; /* support link power management */ unsigned has_ppcd:1; /* support per-port change bits */ u8 sbrn; /* packed release number */ @@ -223,6 +225,9 @@ struct ehci_hcd { /* one per controller */ #ifdef DEBUG struct dentry *debug_dir; #endif + + /* platform-specific data -- must come last */ + unsigned long priv[0] __aligned(sizeof(s64)); }; /* convert between an HCD pointer and the corresponding EHCI_HCD */ @@ -762,26 +767,41 @@ static inline u32 hc32_to_cpup (const struct ehci_hcd *ehci, const __hc32 *x) /*-------------------------------------------------------------------------*/ -#ifdef CONFIG_PCI - -/* For working around the MosChip frame-index-register bug */ -static unsigned ehci_read_frame_index(struct ehci_hcd *ehci); - +#define ehci_dbg(ehci, fmt, args...) \ + dev_dbg(ehci_to_hcd(ehci)->self.controller , fmt , ## args) +#define ehci_err(ehci, fmt, args...) \ + dev_err(ehci_to_hcd(ehci)->self.controller , fmt , ## args) +#define ehci_info(ehci, fmt, args...) \ + dev_info(ehci_to_hcd(ehci)->self.controller , fmt , ## args) +#define ehci_warn(ehci, fmt, args...) \ + dev_warn(ehci_to_hcd(ehci)->self.controller , fmt , ## args) + +#ifdef VERBOSE_DEBUG +# define ehci_vdbg ehci_dbg #else - -static inline unsigned ehci_read_frame_index(struct ehci_hcd *ehci) -{ - return ehci_readl(ehci, &ehci->regs->frame_index); -} - + static inline void ehci_vdbg(struct ehci_hcd *ehci, ...) {} #endif -/*-------------------------------------------------------------------------*/ - #ifndef DEBUG #define STUB_DEBUG_FILES #endif /* DEBUG */ /*-------------------------------------------------------------------------*/ +/* Declarations of things exported for use by ehci platform drivers */ + +struct ehci_driver_overrides { + size_t extra_priv_size; + int (*reset)(struct usb_hcd *hcd); +}; + +extern void ehci_init_driver(struct hc_driver *drv, + const struct ehci_driver_overrides *over); +extern int ehci_setup(struct usb_hcd *hcd); + +#ifdef CONFIG_PM +extern int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup); +extern int ehci_resume(struct usb_hcd *hcd, bool hibernated); +#endif /* CONFIG_PM */ + #endif /* __LINUX_EHCI_HCD_H */ diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c index 7da1a26bed2..0b46542591f 100644 --- a/drivers/usb/host/fhci-hcd.c +++ b/drivers/usb/host/fhci-hcd.c @@ -561,7 +561,7 @@ static const struct hc_driver fhci_driver = { .hub_control = fhci_hub_control, }; -static int __devinit of_fhci_probe(struct platform_device *ofdev) +static int of_fhci_probe(struct platform_device *ofdev) { struct device *dev = &ofdev->dev; struct device_node *node = dev->of_node; @@ -780,7 +780,7 @@ err_regs: return ret; } -static int __devexit fhci_remove(struct device *dev) +static int fhci_remove(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct fhci_hcd *fhci = hcd_to_fhci(hcd); @@ -803,7 +803,7 @@ static int __devexit fhci_remove(struct device *dev) return 0; } -static int __devexit of_fhci_remove(struct platform_device *ofdev) +static int of_fhci_remove(struct platform_device *ofdev) { return fhci_remove(&ofdev->dev); } @@ -821,7 +821,7 @@ static struct platform_driver of_fhci_driver = { .of_match_table = of_fhci_match, }, .probe = of_fhci_probe, - .remove = __devexit_p(of_fhci_remove), + .remove = of_fhci_remove, }; module_platform_driver(of_fhci_driver); diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c index 1e771292383..11e0b79ff9d 100644 --- a/drivers/usb/host/fsl-mph-dr-of.c +++ b/drivers/usb/host/fsl-mph-dr-of.c @@ -24,7 +24,7 @@ struct fsl_usb2_dev_data { enum fsl_usb2_operating_modes op_mode; /* operating mode */ }; -struct fsl_usb2_dev_data dr_mode_data[] __devinitdata = { +struct fsl_usb2_dev_data dr_mode_data[] = { { .dr_mode = "host", .drivers = { "fsl-ehci", NULL, NULL, }, @@ -42,7 +42,7 @@ struct fsl_usb2_dev_data dr_mode_data[] __devinitdata = { }, }; -struct fsl_usb2_dev_data * __devinit get_dr_mode_data(struct device_node *np) +struct fsl_usb2_dev_data *get_dr_mode_data(struct device_node *np) { const unsigned char *prop; int i; @@ -59,7 +59,7 @@ struct fsl_usb2_dev_data * __devinit get_dr_mode_data(struct device_node *np) return &dr_mode_data[0]; /* mode not specified, use host */ } -static enum fsl_usb2_phy_modes __devinit determine_usb_phy(const char *phy_type) +static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type) { if (!phy_type) return FSL_USB2_PHY_NONE; @@ -75,7 +75,7 @@ static enum fsl_usb2_phy_modes __devinit determine_usb_phy(const char *phy_type) return FSL_USB2_PHY_NONE; } -struct platform_device * __devinit fsl_usb2_device_register( +struct platform_device *fsl_usb2_device_register( struct platform_device *ofdev, struct fsl_usb2_platform_data *pdata, const char *name, int id) @@ -142,6 +142,9 @@ static int usb_get_ver_info(struct device_node *np) return ver; } + if (of_device_is_compatible(np, "fsl,mpc5121-usb2-dr")) + return FSL_USB_VER_OLD; + if (of_device_is_compatible(np, "fsl-usb2-mph")) { if (of_device_is_compatible(np, "fsl-usb2-mph-v1.6")) ver = FSL_USB_VER_1_6; @@ -154,7 +157,7 @@ static int usb_get_ver_info(struct device_node *np) return ver; } -static int __devinit fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev) +static int fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev) { struct device_node *np = ofdev->dev.of_node; struct platform_device *usb_dev; @@ -224,13 +227,13 @@ static int __devinit fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev) return 0; } -static int __devexit __unregister_subdev(struct device *dev, void *d) +static int __unregister_subdev(struct device *dev, void *d) { platform_device_unregister(to_platform_device(dev)); return 0; } -static int __devexit fsl_usb2_mph_dr_of_remove(struct platform_device *ofdev) +static int fsl_usb2_mph_dr_of_remove(struct platform_device *ofdev) { device_for_each_child(&ofdev->dev, NULL, __unregister_subdev); return 0; @@ -336,7 +339,7 @@ static struct platform_driver fsl_usb2_mph_dr_driver = { .of_match_table = fsl_usb2_mph_dr_of_match, }, .probe = fsl_usb2_mph_dr_of_probe, - .remove = __devexit_p(fsl_usb2_mph_dr_of_remove), + .remove = fsl_usb2_mph_dr_of_remove, }; module_platform_driver(fsl_usb2_mph_dr_driver); diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index f19e2690c23..f0ebe8e7c58 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -58,6 +58,7 @@ #include <linux/usb.h> #include <linux/usb/hcd.h> #include <linux/dma-mapping.h> +#include <linux/module.h> #include "imx21-hcd.h" @@ -1680,7 +1681,7 @@ static int imx21_hc_reset(struct usb_hcd *hcd) return 0; } -static int __devinit imx21_hc_start(struct usb_hcd *hcd) +static int imx21_hc_start(struct usb_hcd *hcd) { struct imx21 *imx21 = hcd_to_imx21(hcd); unsigned long flags; diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 9e65e3091c8..b64e661618b 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1557,7 +1557,7 @@ static int isp116x_remove(struct platform_device *pdev) return 0; } -static int __devinit isp116x_probe(struct platform_device *pdev) +static int isp116x_probe(struct platform_device *pdev) { struct usb_hcd *hcd; struct isp116x *isp116x; diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 256326322cf..974480c516f 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -2645,7 +2645,7 @@ static struct hc_driver isp1362_hc_driver = { /*-------------------------------------------------------------------------*/ -static int __devexit isp1362_remove(struct platform_device *pdev) +static int isp1362_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd); @@ -2680,7 +2680,7 @@ static int __devexit isp1362_remove(struct platform_device *pdev) return 0; } -static int __devinit isp1362_probe(struct platform_device *pdev) +static int isp1362_probe(struct platform_device *pdev) { struct usb_hcd *hcd; struct isp1362_hcd *isp1362_hcd; @@ -2856,7 +2856,7 @@ static int isp1362_resume(struct platform_device *pdev) static struct platform_driver isp1362_driver = { .probe = isp1362_probe, - .remove = __devexit_p(isp1362_remove), + .remove = isp1362_remove, .suspend = isp1362_suspend, .resume = isp1362_resume, diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index a35bbddf896..125e261f5bf 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -932,7 +932,7 @@ static void enqueue_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh) } } -void schedule_ptds(struct usb_hcd *hcd) +static void schedule_ptds(struct usb_hcd *hcd) { struct isp1760_hcd *priv; struct isp1760_qh *qh, *qh_next; @@ -1285,7 +1285,7 @@ leave: #define SLOT_CHECK_PERIOD 200 static struct timer_list errata2_timer; -void errata2_function(unsigned long data) +static void errata2_function(unsigned long data) { struct usb_hcd *hcd = (struct usb_hcd *) data; struct isp1760_hcd *priv = hcd_to_priv(hcd); diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index fff114fd546..bbb791bd761 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -43,7 +43,6 @@ static int of_isp1760_probe(struct platform_device *dev) struct device_node *dp = dev->dev.of_node; struct resource *res; struct resource memory; - struct of_irq oirq; int virq; resource_size_t res_len; int ret; @@ -69,14 +68,12 @@ static int of_isp1760_probe(struct platform_device *dev) goto free_data; } - if (of_irq_map_one(dp, 0, &oirq)) { + virq = irq_of_parse_and_map(dp, 0); + if (!virq) { ret = -ENODEV; goto release_reg; } - virq = irq_create_of_mapping(oirq.controller, oirq.specifier, - oirq.size); - if (of_device_is_compatible(dp, "nxp,usb-isp1761")) devflags |= ISP1760_FLAG_ISP1761; @@ -175,7 +172,7 @@ static struct platform_driver isp1760_of_driver = { #endif #ifdef CONFIG_PCI -static int __devinit isp1761_pci_probe(struct pci_dev *dev, +static int isp1761_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) { u8 latency, limit; @@ -349,7 +346,7 @@ static struct pci_driver isp1761_pci_driver = { }; #endif -static int __devinit isp1760_plat_probe(struct platform_device *pdev) +static int isp1760_plat_probe(struct platform_device *pdev) { int ret = 0; struct usb_hcd *hcd; @@ -416,7 +413,7 @@ out: return ret; } -static int __devexit isp1760_plat_remove(struct platform_device *pdev) +static int isp1760_plat_remove(struct platform_device *pdev) { struct resource *mem_res; resource_size_t mem_size; @@ -435,7 +432,7 @@ static int __devexit isp1760_plat_remove(struct platform_device *pdev) static struct platform_driver isp1760_plat_driver = { .probe = isp1760_plat_probe, - .remove = __devexit_p(isp1760_plat_remove), + .remove = isp1760_plat_remove, .driver = { .name = "isp1760", }, diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 0bf72f943b0..a0cb44f0e72 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -16,11 +16,11 @@ #include <linux/platform_device.h> #include <linux/of_platform.h> #include <linux/of_gpio.h> +#include <linux/platform_data/atmel.h> #include <mach/hardware.h> #include <asm/gpio.h> -#include <mach/board.h> #include <mach/cpu.h> #ifndef CONFIG_ARCH_AT91 @@ -94,7 +94,7 @@ static void at91_stop_hc(struct platform_device *pdev) /*-------------------------------------------------------------------------*/ -static void __devexit usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *); +static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *); /* configure so an HC device and id are always provided */ /* always called with process context; sleeping is OK */ @@ -108,7 +108,7 @@ static void __devexit usb_hcd_at91_remove (struct usb_hcd *, struct platform_dev * then invokes the start() method for the HCD associated with it * through the hotplug entry's driver_data. */ -static int __devinit usb_hcd_at91_probe(const struct hc_driver *driver, +static int usb_hcd_at91_probe(const struct hc_driver *driver, struct platform_device *pdev) { int retval; @@ -203,7 +203,7 @@ static int __devinit usb_hcd_at91_probe(const struct hc_driver *driver, * context, "rmmod" or something similar. * */ -static void __devexit usb_hcd_at91_remove(struct usb_hcd *hcd, +static void usb_hcd_at91_remove(struct usb_hcd *hcd, struct platform_device *pdev) { usb_remove_hcd(hcd); @@ -222,7 +222,7 @@ static void __devexit usb_hcd_at91_remove(struct usb_hcd *hcd, /*-------------------------------------------------------------------------*/ -static int __devinit +static int ohci_at91_reset (struct usb_hcd *hcd) { struct at91_usbh_data *board = hcd->self.controller->platform_data; @@ -236,7 +236,7 @@ ohci_at91_reset (struct usb_hcd *hcd) return 0; } -static int __devinit +static int ohci_at91_start (struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); @@ -506,7 +506,7 @@ MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids); static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32); -static int __devinit ohci_at91_of_init(struct platform_device *pdev) +static int ohci_at91_of_init(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; int i, gpio; @@ -548,7 +548,7 @@ static int __devinit ohci_at91_of_init(struct platform_device *pdev) return 0; } #else -static int __devinit ohci_at91_of_init(struct platform_device *pdev) +static int ohci_at91_of_init(struct platform_device *pdev) { return 0; } @@ -556,7 +556,7 @@ static int __devinit ohci_at91_of_init(struct platform_device *pdev) /*-------------------------------------------------------------------------*/ -static int __devinit ohci_hcd_at91_drv_probe(struct platform_device *pdev) +static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) { struct at91_usbh_data *pdata; int i; @@ -641,7 +641,7 @@ static int __devinit ohci_hcd_at91_drv_probe(struct platform_device *pdev) return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev); } -static int __devexit ohci_hcd_at91_drv_remove(struct platform_device *pdev) +static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) { struct at91_usbh_data *pdata = pdev->dev.platform_data; int i; @@ -705,7 +705,7 @@ static int ohci_hcd_at91_drv_resume(struct platform_device *pdev) if (!clocked) at91_start_clock(); - ohci_finish_controller_resume(hcd); + ohci_resume(hcd, false); return 0; } #else @@ -717,7 +717,7 @@ MODULE_ALIAS("platform:at91_ohci"); static struct platform_driver ohci_hcd_at91_driver = { .probe = ohci_hcd_at91_drv_probe, - .remove = __devexit_p(ohci_hcd_at91_drv_remove), + .remove = ohci_hcd_at91_drv_remove, .shutdown = usb_hcd_platform_shutdown, .suspend = ohci_hcd_at91_drv_suspend, .resume = ohci_hcd_at91_drv_resume, diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c deleted file mode 100644 index c611699b4aa..00000000000 --- a/drivers/usb/host/ohci-au1xxx.c +++ /dev/null @@ -1,234 +0,0 @@ -/* - * OHCI HCD (Host Controller Driver) for USB. - * - * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> - * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> - * (C) Copyright 2002 Hewlett-Packard Company - * - * Bus Glue for AMD Alchemy Au1xxx - * - * Written by Christopher Hoover <ch@hpl.hp.com> - * Based on fragments of previous driver by Russell King et al. - * - * Modified for LH7A404 from ohci-sa1111.c - * by Durgesh Pattamatta <pattamattad@sharpsec.com> - * Modified for AMD Alchemy Au1xxx - * by Matt Porter <mporter@kernel.crashing.org> - * - * This file is licenced under the GPL. - */ - -#include <linux/platform_device.h> -#include <linux/signal.h> - -#include <asm/mach-au1x00/au1000.h> - - -extern int usb_disabled(void); - -static int __devinit ohci_au1xxx_start(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - int ret; - - ohci_dbg(ohci, "ohci_au1xxx_start, ohci:%p", ohci); - - if ((ret = ohci_init(ohci)) < 0) - return ret; - - if ((ret = ohci_run(ohci)) < 0) { - dev_err(hcd->self.controller, "can't start %s", - hcd->self.bus_name); - ohci_stop(hcd); - return ret; - } - - return 0; -} - -static const struct hc_driver ohci_au1xxx_hc_driver = { - .description = hcd_name, - .product_desc = "Au1xxx OHCI", - .hcd_priv_size = sizeof(struct ohci_hcd), - - /* - * generic hardware linkage - */ - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .start = ohci_au1xxx_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - -static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev) -{ - int ret, unit; - struct usb_hcd *hcd; - - if (usb_disabled()) - return -ENODEV; - - if (pdev->resource[1].flags != IORESOURCE_IRQ) { - pr_debug("resource[1] is not IORESOURCE_IRQ\n"); - return -ENOMEM; - } - - hcd = usb_create_hcd(&ohci_au1xxx_hc_driver, &pdev->dev, "au1xxx"); - if (!hcd) - return -ENOMEM; - - hcd->rsrc_start = pdev->resource[0].start; - hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; - - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - pr_debug("request_mem_region failed\n"); - ret = -EBUSY; - goto err1; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - pr_debug("ioremap failed\n"); - ret = -ENOMEM; - goto err2; - } - - unit = (hcd->rsrc_start == AU1300_USB_OHCI1_PHYS_ADDR) ? - ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0; - if (alchemy_usb_control(unit, 1)) { - printk(KERN_INFO "%s: controller init failed!\n", pdev->name); - ret = -ENODEV; - goto err3; - } - - ohci_hcd_init(hcd_to_ohci(hcd)); - - ret = usb_add_hcd(hcd, pdev->resource[1].start, - IRQF_SHARED); - if (ret == 0) { - platform_set_drvdata(pdev, hcd); - return ret; - } - - alchemy_usb_control(unit, 0); -err3: - iounmap(hcd->regs); -err2: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -err1: - usb_put_hcd(hcd); - return ret; -} - -static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - int unit; - - unit = (hcd->rsrc_start == AU1300_USB_OHCI1_PHYS_ADDR) ? - ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0; - usb_remove_hcd(hcd); - alchemy_usb_control(unit, 0); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - usb_put_hcd(hcd); - platform_set_drvdata(pdev, NULL); - - return 0; -} - -#ifdef CONFIG_PM -static int ohci_hcd_au1xxx_drv_suspend(struct device *dev) -{ - struct usb_hcd *hcd = dev_get_drvdata(dev); - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - unsigned long flags; - int rc; - - rc = 0; - - /* Root hub was already suspended. Disable irq emission and - * mark HW unaccessible, bail out if RH has been resumed. Use - * the spinlock to properly synchronize with possible pending - * RH suspend or resume activity. - */ - spin_lock_irqsave(&ohci->lock, flags); - if (ohci->rh_state != OHCI_RH_SUSPENDED) { - rc = -EINVAL; - goto bail; - } - ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); - (void)ohci_readl(ohci, &ohci->regs->intrdisable); - - clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - - alchemy_usb_control(ALCHEMY_USB_OHCI0, 0); -bail: - spin_unlock_irqrestore(&ohci->lock, flags); - - return rc; -} - -static int ohci_hcd_au1xxx_drv_resume(struct device *dev) -{ - struct usb_hcd *hcd = dev_get_drvdata(dev); - - alchemy_usb_control(ALCHEMY_USB_OHCI0, 1); - - set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - ohci_finish_controller_resume(hcd); - - return 0; -} - -static const struct dev_pm_ops au1xxx_ohci_pmops = { - .suspend = ohci_hcd_au1xxx_drv_suspend, - .resume = ohci_hcd_au1xxx_drv_resume, -}; - -#define AU1XXX_OHCI_PMOPS &au1xxx_ohci_pmops - -#else -#define AU1XXX_OHCI_PMOPS NULL -#endif - -static struct platform_driver ohci_hcd_au1xxx_driver = { - .probe = ohci_hcd_au1xxx_drv_probe, - .remove = ohci_hcd_au1xxx_drv_remove, - .shutdown = usb_hcd_platform_shutdown, - .driver = { - .name = "au1xxx-ohci", - .owner = THIS_MODULE, - .pm = AU1XXX_OHCI_PMOPS, - }, -}; - -MODULE_ALIAS("platform:au1xxx-ohci"); diff --git a/drivers/usb/host/ohci-cns3xxx.c b/drivers/usb/host/ohci-cns3xxx.c deleted file mode 100644 index 2c9f233047b..00000000000 --- a/drivers/usb/host/ohci-cns3xxx.c +++ /dev/null @@ -1,166 +0,0 @@ -/* - * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/atomic.h> -#include <mach/cns3xxx.h> -#include <mach/pm.h> - -static int __devinit -cns3xxx_ohci_start(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - int ret; - - /* - * EHCI and OHCI share the same clock and power, - * resetting twice would cause the 1st controller been reset. - * Therefore only do power up at the first up device, and - * power down at the last down device. - * - * Set USB AHB INCR length to 16 - */ - if (atomic_inc_return(&usb_pwr_ref) == 1) { - cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB); - cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST); - cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST); - __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)), - MISC_CHIP_CONFIG_REG); - } - - ret = ohci_init(ohci); - if (ret < 0) - return ret; - - ohci->num_ports = 1; - - ret = ohci_run(ohci); - if (ret < 0) { - dev_err(hcd->self.controller, "can't start %s\n", - hcd->self.bus_name); - ohci_stop(hcd); - return ret; - } - return 0; -} - -static const struct hc_driver cns3xxx_ohci_hc_driver = { - .description = hcd_name, - .product_desc = "CNS3XXX OHCI Host controller", - .hcd_priv_size = sizeof(struct ohci_hcd), - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - .start = cns3xxx_ohci_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - .get_frame_number = ohci_get_frame, - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - -static int cns3xxx_ohci_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct usb_hcd *hcd; - const struct hc_driver *driver = &cns3xxx_ohci_hc_driver; - struct resource *res; - int irq; - int retval; - - if (usb_disabled()) - return -ENODEV; - - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { - dev_err(dev, "Found HC with no IRQ.\n"); - return -ENODEV; - } - irq = res->start; - - hcd = usb_create_hcd(driver, dev, dev_name(dev)); - if (!hcd) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "Found HC with no register addr.\n"); - retval = -ENODEV; - goto err1; - } - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, - driver->description)) { - dev_dbg(dev, "controller already in use\n"); - retval = -EBUSY; - goto err1; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - dev_dbg(dev, "error mapping memory\n"); - retval = -EFAULT; - goto err2; - } - - ohci_hcd_init(hcd_to_ohci(hcd)); - - retval = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (retval == 0) - return retval; - - iounmap(hcd->regs); -err2: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -err1: - usb_put_hcd(hcd); - return retval; -} - -static int cns3xxx_ohci_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - - /* - * EHCI and OHCI share the same clock and power, - * resetting twice would cause the 1st controller been reset. - * Therefore only do power up at the first up device, and - * power down at the last down device. - */ - if (atomic_dec_return(&usb_pwr_ref) == 0) - cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST); - - usb_put_hcd(hcd); - - platform_set_drvdata(pdev, NULL); - - return 0; -} - -MODULE_ALIAS("platform:cns3xxx-ohci"); - -static struct platform_driver ohci_hcd_cns3xxx_driver = { - .probe = cns3xxx_ohci_probe, - .remove = cns3xxx_ohci_remove, - .driver = { - .name = "cns3xxx-ohci", - }, -}; diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c index dbfbd1dfd2e..8704e9fa5a8 100644 --- a/drivers/usb/host/ohci-ep93xx.c +++ b/drivers/usb/host/ohci-ep93xx.c @@ -107,7 +107,7 @@ static void usb_hcd_ep93xx_remove(struct usb_hcd *hcd, usb_put_hcd(hcd); } -static int __devinit ohci_ep93xx_start(struct usb_hcd *hcd) +static int ohci_ep93xx_start(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci(hcd); int ret; @@ -194,7 +194,7 @@ static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev) ep93xx_start_hc(&pdev->dev); - ohci_finish_controller_resume(hcd); + ohci_resume(hcd, false); return 0; } #endif diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index 20a50081f92..e3b7e85120e 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -15,14 +15,44 @@ #include <linux/of.h> #include <linux/platform_device.h> #include <linux/platform_data/usb-exynos.h> +#include <linux/usb/phy.h> +#include <linux/usb/samsung_usb_phy.h> #include <plat/usb-phy.h> struct exynos_ohci_hcd { struct device *dev; struct usb_hcd *hcd; struct clk *clk; + struct usb_phy *phy; + struct usb_otg *otg; + struct exynos4_ohci_platdata *pdata; }; +static void exynos_ohci_phy_enable(struct exynos_ohci_hcd *exynos_ohci) +{ + struct platform_device *pdev = to_platform_device(exynos_ohci->dev); + + if (exynos_ohci->phy) + usb_phy_init(exynos_ohci->phy); + else if (exynos_ohci->pdata->phy_init) + exynos_ohci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST); +} + +static void exynos_ohci_phy_disable(struct exynos_ohci_hcd *exynos_ohci) +{ + struct platform_device *pdev = to_platform_device(exynos_ohci->dev); + + if (exynos_ohci->phy) + usb_phy_shutdown(exynos_ohci->phy); + else if (exynos_ohci->pdata->phy_exit) + exynos_ohci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST); +} + +static int ohci_exynos_reset(struct usb_hcd *hcd) +{ + return ohci_init(hcd_to_ohci(hcd)); +} + static int ohci_exynos_start(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci(hcd); @@ -30,10 +60,6 @@ static int ohci_exynos_start(struct usb_hcd *hcd) ohci_dbg(ohci, "ohci_exynos_start, ohci:%p", ohci); - ret = ohci_init(ohci); - if (ret < 0) - return ret; - ret = ohci_run(ohci); if (ret < 0) { dev_err(hcd->self.controller, "can't start %s\n", @@ -53,6 +79,7 @@ static const struct hc_driver exynos_ohci_hc_driver = { .irq = ohci_irq, .flags = HCD_MEMORY|HCD_USB11, + .reset = ohci_exynos_reset, .start = ohci_exynos_start, .stop = ohci_stop, .shutdown = ohci_shutdown, @@ -74,22 +101,17 @@ static const struct hc_driver exynos_ohci_hc_driver = { static u64 ohci_exynos_dma_mask = DMA_BIT_MASK(32); -static int __devinit exynos_ohci_probe(struct platform_device *pdev) +static int exynos_ohci_probe(struct platform_device *pdev) { - struct exynos4_ohci_platdata *pdata; + struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data; struct exynos_ohci_hcd *exynos_ohci; struct usb_hcd *hcd; struct ohci_hcd *ohci; struct resource *res; + struct usb_phy *phy; int irq; int err; - pdata = pdev->dev.platform_data; - if (!pdata) { - dev_err(&pdev->dev, "No platform data defined\n"); - return -EINVAL; - } - /* * Right now device-tree probed devices don't get dma_mask set. * Since shared usb code relies on it, set it here for now. @@ -105,6 +127,20 @@ static int __devinit exynos_ohci_probe(struct platform_device *pdev) if (!exynos_ohci) return -ENOMEM; + phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(phy)) { + /* Fallback to pdata */ + if (!pdata) { + dev_warn(&pdev->dev, "no platform data or transceiver defined\n"); + return -EPROBE_DEFER; + } else { + exynos_ohci->pdata = pdata; + } + } else { + exynos_ohci->phy = phy; + exynos_ohci->otg = phy->otg; + } + exynos_ohci->dev = &pdev->dev; hcd = usb_create_hcd(&exynos_ohci_hc_driver, &pdev->dev, @@ -115,7 +151,7 @@ static int __devinit exynos_ohci_probe(struct platform_device *pdev) } exynos_ohci->hcd = hcd; - exynos_ohci->clk = clk_get(&pdev->dev, "usbhost"); + exynos_ohci->clk = devm_clk_get(&pdev->dev, "usbhost"); if (IS_ERR(exynos_ohci->clk)) { dev_err(&pdev->dev, "Failed to get usbhost clock\n"); @@ -123,9 +159,9 @@ static int __devinit exynos_ohci_probe(struct platform_device *pdev) goto fail_clk; } - err = clk_enable(exynos_ohci->clk); + err = clk_prepare_enable(exynos_ohci->clk); if (err) - goto fail_clken; + goto fail_clk; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -150,8 +186,11 @@ static int __devinit exynos_ohci_probe(struct platform_device *pdev) goto fail_io; } - if (pdata->phy_init) - pdata->phy_init(pdev, S5P_USB_PHY_HOST); + if (exynos_ohci->otg) + exynos_ohci->otg->set_host(exynos_ohci->otg, + &exynos_ohci->hcd->self); + + exynos_ohci_phy_enable(exynos_ohci); ohci = hcd_to_ohci(hcd); ohci_hcd_init(ohci); @@ -159,35 +198,36 @@ static int __devinit exynos_ohci_probe(struct platform_device *pdev) err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) { dev_err(&pdev->dev, "Failed to add USB HCD\n"); - goto fail_io; + goto fail_add_hcd; } platform_set_drvdata(pdev, exynos_ohci); return 0; +fail_add_hcd: + exynos_ohci_phy_disable(exynos_ohci); fail_io: - clk_disable(exynos_ohci->clk); -fail_clken: - clk_put(exynos_ohci->clk); + clk_disable_unprepare(exynos_ohci->clk); fail_clk: usb_put_hcd(hcd); return err; } -static int __devexit exynos_ohci_remove(struct platform_device *pdev) +static int exynos_ohci_remove(struct platform_device *pdev) { - struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data; struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev); struct usb_hcd *hcd = exynos_ohci->hcd; usb_remove_hcd(hcd); - if (pdata && pdata->phy_exit) - pdata->phy_exit(pdev, S5P_USB_PHY_HOST); + if (exynos_ohci->otg) + exynos_ohci->otg->set_host(exynos_ohci->otg, + &exynos_ohci->hcd->self); + + exynos_ohci_phy_disable(exynos_ohci); - clk_disable(exynos_ohci->clk); - clk_put(exynos_ohci->clk); + clk_disable_unprepare(exynos_ohci->clk); usb_put_hcd(hcd); @@ -209,8 +249,6 @@ static int exynos_ohci_suspend(struct device *dev) struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev); struct usb_hcd *hcd = exynos_ohci->hcd; struct ohci_hcd *ohci = hcd_to_ohci(hcd); - struct platform_device *pdev = to_platform_device(dev); - struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data; unsigned long flags; int rc = 0; @@ -229,10 +267,13 @@ static int exynos_ohci_suspend(struct device *dev) clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - if (pdata && pdata->phy_exit) - pdata->phy_exit(pdev, S5P_USB_PHY_HOST); + if (exynos_ohci->otg) + exynos_ohci->otg->set_host(exynos_ohci->otg, + &exynos_ohci->hcd->self); + + exynos_ohci_phy_disable(exynos_ohci); - clk_disable(exynos_ohci->clk); + clk_disable_unprepare(exynos_ohci->clk); fail: spin_unlock_irqrestore(&ohci->lock, flags); @@ -244,18 +285,16 @@ static int exynos_ohci_resume(struct device *dev) { struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev); struct usb_hcd *hcd = exynos_ohci->hcd; - struct platform_device *pdev = to_platform_device(dev); - struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data; - clk_enable(exynos_ohci->clk); + clk_prepare_enable(exynos_ohci->clk); - if (pdata && pdata->phy_init) - pdata->phy_init(pdev, S5P_USB_PHY_HOST); + if (exynos_ohci->otg) + exynos_ohci->otg->set_host(exynos_ohci->otg, + &exynos_ohci->hcd->self); - /* Mark hardware accessible again as we are out of D3 state by now */ - set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + exynos_ohci_phy_enable(exynos_ohci); - ohci_finish_controller_resume(hcd); + ohci_resume(hcd, false); return 0; } @@ -271,7 +310,7 @@ static const struct dev_pm_ops exynos_ohci_pm_ops = { #ifdef CONFIG_OF static const struct of_device_id exynos_ohci_match[] = { - { .compatible = "samsung,exynos-ohci" }, + { .compatible = "samsung,exynos4210-ohci" }, {}, }; MODULE_DEVICE_TABLE(of, exynos_ohci_match); @@ -279,7 +318,7 @@ MODULE_DEVICE_TABLE(of, exynos_ohci_match); static struct platform_driver exynos_ohci_driver = { .probe = exynos_ohci_probe, - .remove = __devexit_p(exynos_ohci_remove), + .remove = exynos_ohci_remove, .shutdown = exynos_ohci_shutdown, .driver = { .name = "exynos-ohci", diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 4a1d64d9233..180a2b01db5 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -231,13 +231,41 @@ static int ohci_urb_enqueue ( frame &= ~(ed->interval - 1); frame |= ed->branch; urb->start_frame = frame; + } + } else if (ed->type == PIPE_ISOCHRONOUS) { + u16 next = ohci_frame_no(ohci) + 2; + u16 frame = ed->last_iso + ed->interval; + + /* Behind the scheduling threshold? */ + if (unlikely(tick_before(frame, next))) { - /* yes, only URB_ISO_ASAP is supported, and - * urb->start_frame is never used as input. + /* USB_ISO_ASAP: Round up to the first available slot */ + if (urb->transfer_flags & URB_ISO_ASAP) + frame += (next - frame + ed->interval - 1) & + -ed->interval; + + /* + * Not ASAP: Use the next slot in the stream. If + * the entire URB falls before the threshold, fail. */ + else if (tick_before(frame + ed->interval * + (urb->number_of_packets - 1), next)) { + retval = -EXDEV; + usb_hcd_unlink_urb_from_ep(hcd, urb); + goto fail; + } + + /* + * Some OHCI hardware doesn't handle late TDs + * correctly. After retiring them it proceeds to + * the next ED instead of the next TD. Therefore + * we have to omit the late TDs entirely. + */ + urb_priv->td_cnt = DIV_ROUND_UP(next - frame, + ed->interval); } - } else if (ed->type == PIPE_ISOCHRONOUS) - urb->start_frame = ed->last_iso + ed->interval; + urb->start_frame = frame; + } /* fill the TDs and link them to the ed; and * enable that part of the schedule, if needed @@ -983,6 +1011,79 @@ static int ohci_restart (struct ohci_hcd *ohci) #endif +#ifdef CONFIG_PM + +static int __maybe_unused ohci_suspend(struct usb_hcd *hcd, bool do_wakeup) +{ + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + unsigned long flags; + + /* Disable irq emission and mark HW unaccessible. Use + * the spinlock to properly synchronize with possible pending + * RH suspend or resume activity. + */ + spin_lock_irqsave (&ohci->lock, flags); + ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); + (void)ohci_readl(ohci, &ohci->regs->intrdisable); + + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + spin_unlock_irqrestore (&ohci->lock, flags); + + return 0; +} + + +static int __maybe_unused ohci_resume(struct usb_hcd *hcd, bool hibernated) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int port; + bool need_reinit = false; + + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + + /* Make sure resume from hibernation re-enumerates everything */ + if (hibernated) + ohci_usb_reset(ohci); + + /* See if the controller is already running or has been reset */ + ohci->hc_control = ohci_readl(ohci, &ohci->regs->control); + if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) { + need_reinit = true; + } else { + switch (ohci->hc_control & OHCI_CTRL_HCFS) { + case OHCI_USB_OPER: + case OHCI_USB_RESET: + need_reinit = true; + } + } + + /* If needed, reinitialize and suspend the root hub */ + if (need_reinit) { + spin_lock_irq(&ohci->lock); + ohci_rh_resume(ohci); + ohci_rh_suspend(ohci, 0); + spin_unlock_irq(&ohci->lock); + } + + /* Normally just turn on port power and enable interrupts */ + else { + ohci_dbg(ohci, "powerup ports\n"); + for (port = 0; port < ohci->num_ports; port++) + ohci_writel(ohci, RH_PS_PPS, + &ohci->regs->roothub.portstatus[port]); + + ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrenable); + ohci_readl(ohci, &ohci->regs->intrenable); + msleep(20); + } + + usb_hcd_resume_root_hub(hcd); + + return 0; +} + +#endif + /*-------------------------------------------------------------------------*/ MODULE_AUTHOR (DRIVER_AUTHOR); @@ -1029,21 +1130,6 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ohci_hcd_ep93xx_driver #endif -#ifdef CONFIG_MIPS_ALCHEMY -#include "ohci-au1xxx.c" -#define PLATFORM_DRIVER ohci_hcd_au1xxx_driver -#endif - -#ifdef CONFIG_PNX8550 -#include "ohci-pnx8550.c" -#define PLATFORM_DRIVER ohci_hcd_pnx8550_driver -#endif - -#ifdef CONFIG_USB_OHCI_HCD_PPC_SOC -#include "ohci-ppc-soc.c" -#define PLATFORM_DRIVER ohci_hcd_ppc_soc_driver -#endif - #ifdef CONFIG_ARCH_AT91 #include "ohci-at91.c" #define PLATFORM_DRIVER ohci_hcd_at91_driver @@ -1059,11 +1145,6 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ohci_hcd_da8xx_driver #endif -#ifdef CONFIG_USB_OHCI_SH -#include "ohci-sh.c" -#define PLATFORM_DRIVER ohci_hcd_sh_driver -#endif - #ifdef CONFIG_USB_OHCI_HCD_PPC_OF #include "ohci-ppc-of.c" @@ -1105,16 +1186,6 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ohci_hcd_tilegx_driver #endif -#ifdef CONFIG_USB_CNS3XXX_OHCI -#include "ohci-cns3xxx.c" -#define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver -#endif - -#ifdef CONFIG_CPU_XLR -#include "ohci-xls.c" -#define PLATFORM_DRIVER ohci_xls_driver -#endif - #ifdef CONFIG_USB_OHCI_HCD_PLATFORM #include "ohci-platform.c" #define PLATFORM_DRIVER ohci_platform_driver diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 2f3619eefef..db09dae7b55 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -316,48 +316,6 @@ static int ohci_bus_resume (struct usb_hcd *hcd) return rc; } -/* Carry out the final steps of resuming the controller device */ -static void __maybe_unused ohci_finish_controller_resume(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - int port; - bool need_reinit = false; - - /* See if the controller is already running or has been reset */ - ohci->hc_control = ohci_readl(ohci, &ohci->regs->control); - if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) { - need_reinit = true; - } else { - switch (ohci->hc_control & OHCI_CTRL_HCFS) { - case OHCI_USB_OPER: - case OHCI_USB_RESET: - need_reinit = true; - } - } - - /* If needed, reinitialize and suspend the root hub */ - if (need_reinit) { - spin_lock_irq(&ohci->lock); - ohci_rh_resume(ohci); - ohci_rh_suspend(ohci, 0); - spin_unlock_irq(&ohci->lock); - } - - /* Normally just turn on port power and enable interrupts */ - else { - ohci_dbg(ohci, "powerup ports\n"); - for (port = 0; port < ohci->num_ports; port++) - ohci_writel(ohci, RH_PS_PPS, - &ohci->regs->roothub.portstatus[port]); - - ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrenable); - ohci_readl(ohci, &ohci->regs->intrenable); - msleep(20); - } - - usb_hcd_resume_root_hub(hcd); -} - /* Carry out polling-, autostop-, and autoresume-related state changes */ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, int any_connected, int rhsc_status) diff --git a/drivers/usb/host/ohci-jz4740.c b/drivers/usb/host/ohci-jz4740.c index 931d588c3fb..8062bb9dea1 100644 --- a/drivers/usb/host/ohci-jz4740.c +++ b/drivers/usb/host/ohci-jz4740.c @@ -145,7 +145,7 @@ static const struct hc_driver ohci_jz4740_hc_driver = { }; -static __devinit int jz4740_ohci_probe(struct platform_device *pdev) +static int jz4740_ohci_probe(struct platform_device *pdev) { int ret; struct usb_hcd *hcd; @@ -239,7 +239,7 @@ err_free: return ret; } -static __devexit int jz4740_ohci_remove(struct platform_device *pdev) +static int jz4740_ohci_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); struct jz4740_ohci_hcd *jz4740_ohci = hcd_to_jz4740_hcd(hcd); @@ -266,7 +266,7 @@ static __devexit int jz4740_ohci_remove(struct platform_device *pdev) static struct platform_driver ohci_hcd_jz4740_driver = { .probe = jz4740_ohci_probe, - .remove = __devexit_p(jz4740_ohci_remove), + .remove = jz4740_ohci_remove, .driver = { .name = "jz4740-ohci", .owner = THIS_MODULE, diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index e068f034cb9..f4988fbe78e 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -147,7 +147,7 @@ static void nxp_stop_hc(void) __raw_writel(tmp, USB_OTG_STAT_CONTROL); } -static int __devinit ohci_nxp_start(struct usb_hcd *hcd) +static int ohci_nxp_start(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci(hcd); int ret; @@ -205,7 +205,7 @@ static const struct hc_driver ohci_nxp_hc_driver = { .start_port_reset = ohci_start_port_reset, }; -static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) +static int usb_hcd_nxp_probe(struct platform_device *pdev) { struct usb_hcd *hcd = 0; struct ohci_hcd *ohci; @@ -306,10 +306,9 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) goto out8; } - hcd->regs = devm_request_and_ioremap(&pdev->dev, res); - if (!hcd->regs) { - dev_err(&pdev->dev, "Failed to devm_request_and_ioremap\n"); - ret = -ENOMEM; + hcd->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hcd->regs)) { + ret = PTR_ERR(hcd->regs); goto out8; } hcd->rsrc_start = res->start; diff --git a/drivers/usb/host/ohci-octeon.c b/drivers/usb/host/ohci-octeon.c index d469bf9b9e5..d44430d009f 100644 --- a/drivers/usb/host/ohci-octeon.c +++ b/drivers/usb/host/ohci-octeon.c @@ -42,7 +42,7 @@ static void ohci_octeon_hw_stop(void) octeon2_usb_clocks_stop(); } -static int __devinit ohci_octeon_start(struct usb_hcd *hcd) +static int ohci_octeon_start(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci(hcd); int ret; diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 4531d03503c..b1d32fb4a7a 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -25,7 +25,6 @@ #include <asm/mach-types.h> #include <mach/mux.h> -#include <plat/fpga.h> #include <mach/hardware.h> #include <mach/irqs.h> @@ -93,14 +92,14 @@ static int omap_ohci_transceiver_power(int on) { if (on) { if (machine_is_omap_innovator() && cpu_is_omap1510()) - fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL) + __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL) | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), INNOVATOR_FPGA_CAM_USB_CONTROL); else if (machine_is_omap_osk()) tps65010_set_gpio_out_value(GPIO1, LOW); } else { if (machine_is_omap_innovator() && cpu_is_omap1510()) - fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL) + __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL) & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), INNOVATOR_FPGA_CAM_USB_CONTROL); else if (machine_is_omap_osk()) @@ -530,7 +529,7 @@ static int ohci_omap_resume(struct platform_device *dev) ohci->next_statechange = jiffies; omap_ohci_clock_power(1); - ohci_finish_controller_resume(hcd); + ohci_resume(hcd, false); return 0; } diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c index 1b8133b6e45..eb35d963023 100644 --- a/drivers/usb/host/ohci-omap3.c +++ b/drivers/usb/host/ohci-omap3.c @@ -30,7 +30,6 @@ */ #include <linux/platform_device.h> -#include <plat/usb.h> #include <linux/pm_runtime.h> /*-------------------------------------------------------------------------*/ @@ -125,7 +124,7 @@ static const struct hc_driver ohci_omap3_hc_driver = { * then invokes the start() method for the HCD associated with it * through the hotplug entry's driver_data. */ -static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev) +static int ohci_hcd_omap3_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct usb_hcd *hcd = NULL; @@ -209,7 +208,7 @@ err_io: * the HCD's stop() method. It is always called from a thread * context, normally "rmmod", "apmd", or something similar. */ -static int __devexit ohci_hcd_omap3_remove(struct platform_device *pdev) +static int ohci_hcd_omap3_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct usb_hcd *hcd = dev_get_drvdata(dev); @@ -232,7 +231,7 @@ static void ohci_hcd_omap3_shutdown(struct platform_device *pdev) static struct platform_driver ohci_hcd_omap3_driver = { .probe = ohci_hcd_omap3_probe, - .remove = __devexit_p(ohci_hcd_omap3_remove), + .remove = ohci_hcd_omap3_remove, .shutdown = ohci_hcd_omap3_shutdown, .driver = { .name = "ohci-omap3", diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 1843bb68ac7..951514ef446 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -270,7 +270,7 @@ static int ohci_pci_reset (struct usb_hcd *hcd) } -static int __devinit ohci_pci_start (struct usb_hcd *hcd) +static int ohci_pci_start (struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); int ret; @@ -296,49 +296,6 @@ static int __devinit ohci_pci_start (struct usb_hcd *hcd) return ret; } -#ifdef CONFIG_PM - -static int ohci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) -{ - struct ohci_hcd *ohci = hcd_to_ohci (hcd); - unsigned long flags; - int rc = 0; - - /* Root hub was already suspended. Disable irq emission and - * mark HW unaccessible, bail out if RH has been resumed. Use - * the spinlock to properly synchronize with possible pending - * RH suspend or resume activity. - */ - spin_lock_irqsave (&ohci->lock, flags); - if (ohci->rh_state != OHCI_RH_SUSPENDED) { - rc = -EINVAL; - goto bail; - } - ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); - (void)ohci_readl(ohci, &ohci->regs->intrdisable); - - clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - bail: - spin_unlock_irqrestore (&ohci->lock, flags); - - return rc; -} - - -static int ohci_pci_resume(struct usb_hcd *hcd, bool hibernated) -{ - set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - - /* Make sure resume from hibernation re-enumerates everything */ - if (hibernated) - ohci_usb_reset(hcd_to_ohci(hcd)); - - ohci_finish_controller_resume(hcd); - return 0; -} - -#endif /* CONFIG_PM */ - /*-------------------------------------------------------------------------*/ @@ -362,8 +319,8 @@ static const struct hc_driver ohci_pci_hc_driver = { .shutdown = ohci_shutdown, #ifdef CONFIG_PM - .pci_suspend = ohci_pci_suspend, - .pci_resume = ohci_pci_resume, + .pci_suspend = ohci_suspend, + .pci_resume = ohci_resume, #endif /* diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c index e24ec9f7916..c3e7287f792 100644 --- a/drivers/usb/host/ohci-platform.c +++ b/drivers/usb/host/ohci-platform.c @@ -13,6 +13,7 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ +#include <linux/err.h> #include <linux/platform_device.h> #include <linux/usb/ohci_pdriver.h> @@ -31,6 +32,10 @@ static int ohci_platform_reset(struct usb_hcd *hcd) ohci->flags |= OHCI_QUIRK_FRAME_NO; ohci_hcd_init(ohci); + + if (pdata->num_ports) + ohci->num_ports = pdata->num_ports; + err = ohci_init(ohci); return err; @@ -79,7 +84,7 @@ static const struct hc_driver ohci_platform_hc_driver = { .start_port_reset = ohci_start_port_reset, }; -static int __devinit ohci_platform_probe(struct platform_device *dev) +static int ohci_platform_probe(struct platform_device *dev) { struct usb_hcd *hcd; struct resource *res_mem; @@ -97,13 +102,13 @@ static int __devinit ohci_platform_probe(struct platform_device *dev) irq = platform_get_irq(dev, 0); if (irq < 0) { - pr_err("no irq provided"); + dev_err(&dev->dev, "no irq provided"); return irq; } res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); if (!res_mem) { - pr_err("no memory recourse provided"); + dev_err(&dev->dev, "no memory resource provided"); return -ENXIO; } @@ -123,29 +128,19 @@ static int __devinit ohci_platform_probe(struct platform_device *dev) hcd->rsrc_start = res_mem->start; hcd->rsrc_len = resource_size(res_mem); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - pr_err("controller already in use"); - err = -EBUSY; + hcd->regs = devm_ioremap_resource(&dev->dev, res_mem); + if (IS_ERR(hcd->regs)) { + err = PTR_ERR(hcd->regs); goto err_put_hcd; } - - hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - err = -ENOMEM; - goto err_release_region; - } err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) - goto err_iounmap; + goto err_put_hcd; platform_set_drvdata(dev, hcd); return err; -err_iounmap: - iounmap(hcd->regs); -err_release_region: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err_put_hcd: usb_put_hcd(hcd); err_power: @@ -155,14 +150,12 @@ err_power: return err; } -static int __devexit ohci_platform_remove(struct platform_device *dev) +static int ohci_platform_remove(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); struct usb_ohci_pdata *pdata = dev->dev.platform_data; usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); platform_set_drvdata(dev, NULL); @@ -199,7 +192,7 @@ static int ohci_platform_resume(struct device *dev) return err; } - ohci_finish_controller_resume(hcd); + ohci_resume(hcd, false); return 0; } @@ -222,7 +215,7 @@ static const struct dev_pm_ops ohci_platform_pm_ops = { static struct platform_driver ohci_platform_driver = { .id_table = ohci_platform_table, .probe = ohci_platform_probe, - .remove = __devexit_p(ohci_platform_remove), + .remove = ohci_platform_remove, .shutdown = usb_hcd_platform_shutdown, .driver = { .owner = THIS_MODULE, diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c deleted file mode 100644 index 148d27d6a67..00000000000 --- a/drivers/usb/host/ohci-pnx8550.c +++ /dev/null @@ -1,243 +0,0 @@ -/* - * OHCI HCD (Host Controller Driver) for USB. - * - * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> - * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> - * (C) Copyright 2002 Hewlett-Packard Company - * (C) Copyright 2005 Embedded Alley Solutions, Inc. - * - * Bus Glue for PNX8550 - * - * Written by Christopher Hoover <ch@hpl.hp.com> - * Based on fragments of previous driver by Russell King et al. - * - * Modified for LH7A404 from ohci-sa1111.c - * by Durgesh Pattamatta <pattamattad@sharpsec.com> - * - * Modified for PNX8550 from ohci-sa1111.c and sa-omap.c - * by Vitaly Wool <vitalywool@gmail.com> - * - * This file is licenced under the GPL. - */ - -#include <linux/device.h> -#include <linux/platform_device.h> -#include <asm/mach-pnx8550/usb.h> -#include <asm/mach-pnx8550/int.h> -#include <asm/mach-pnx8550/pci.h> - -#ifndef CONFIG_PNX8550 -#error "This file is PNX8550 bus glue. CONFIG_PNX8550 must be defined." -#endif - -extern int usb_disabled(void); - -/*-------------------------------------------------------------------------*/ - -static void pnx8550_start_hc(struct platform_device *dev) -{ - /* - * Set register CLK48CTL to enable and 48MHz - */ - outl(0x00000003, PCI_BASE | 0x0004770c); - - /* - * Set register CLK12CTL to enable and 48MHz - */ - outl(0x00000003, PCI_BASE | 0x00047710); - - udelay(100); -} - -static void pnx8550_stop_hc(struct platform_device *dev) -{ - udelay(10); -} - - -/*-------------------------------------------------------------------------*/ - -/* configure so an HC device and id are always provided */ -/* always called with process context; sleeping is OK */ - - -/** - * usb_hcd_pnx8550_probe - initialize pnx8550-based HCDs - * Context: !in_interrupt() - * - * Allocates basic resources for this USB host controller, and - * then invokes the start() method for the HCD associated with it - * through the hotplug entry's driver_data. - * - */ -int usb_hcd_pnx8550_probe (const struct hc_driver *driver, - struct platform_device *dev) -{ - int retval; - struct usb_hcd *hcd; - - if (dev->resource[0].flags != IORESOURCE_MEM || - dev->resource[1].flags != IORESOURCE_IRQ) { - dev_err (&dev->dev,"invalid resource type\n"); - return -ENOMEM; - } - - hcd = usb_create_hcd (driver, &dev->dev, "pnx8550"); - if (!hcd) - return -ENOMEM; - hcd->rsrc_start = dev->resource[0].start; - hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1; - - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - dev_err(&dev->dev, "request_mem_region [0x%08llx, 0x%08llx] " - "failed\n", hcd->rsrc_start, hcd->rsrc_len); - retval = -EBUSY; - goto err1; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - dev_err(&dev->dev, "ioremap [[0x%08llx, 0x%08llx] failed\n", - hcd->rsrc_start, hcd->rsrc_len); - retval = -ENOMEM; - goto err2; - } - - pnx8550_start_hc(dev); - - ohci_hcd_init(hcd_to_ohci(hcd)); - - retval = usb_add_hcd(hcd, dev->resource[1].start, 0); - if (retval == 0) - return retval; - - pnx8550_stop_hc(dev); - iounmap(hcd->regs); - err2: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - err1: - usb_put_hcd(hcd); - return retval; -} - - -/* may be called without controller electrically present */ -/* may be called with controller, bus, and devices active */ - -/** - * usb_hcd_pnx8550_remove - shutdown processing for pnx8550-based HCDs - * @dev: USB Host Controller being removed - * Context: !in_interrupt() - * - * Reverses the effect of usb_hcd_pnx8550_probe(), first invoking - * the HCD's stop() method. It is always called from a thread - * context, normally "rmmod", "apmd", or something similar. - * - */ -void usb_hcd_pnx8550_remove (struct usb_hcd *hcd, struct platform_device *dev) -{ - usb_remove_hcd(hcd); - pnx8550_stop_hc(dev); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - usb_put_hcd(hcd); -} - -/*-------------------------------------------------------------------------*/ - -static int __devinit -ohci_pnx8550_start (struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci (hcd); - int ret; - - ohci_dbg (ohci, "ohci_pnx8550_start, ohci:%p", ohci); - - if ((ret = ohci_init(ohci)) < 0) - return ret; - - if ((ret = ohci_run (ohci)) < 0) { - dev_err(hcd->self.controller, "can't start %s", - hcd->self.bus_name); - ohci_stop (hcd); - return ret; - } - - return 0; -} - -/*-------------------------------------------------------------------------*/ - -static const struct hc_driver ohci_pnx8550_hc_driver = { - .description = hcd_name, - .product_desc = "PNX8550 OHCI", - .hcd_priv_size = sizeof(struct ohci_hcd), - - /* - * generic hardware linkage - */ - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .start = ohci_pnx8550_start, - .stop = ohci_stop, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - -/*-------------------------------------------------------------------------*/ - -static int ohci_hcd_pnx8550_drv_probe(struct platform_device *pdev) -{ - int ret; - - if (usb_disabled()) - return -ENODEV; - - ret = usb_hcd_pnx8550_probe(&ohci_pnx8550_hc_driver, pdev); - return ret; -} - -static int ohci_hcd_pnx8550_drv_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_hcd_pnx8550_remove(hcd, pdev); - return 0; -} - -MODULE_ALIAS("platform:pnx8550-ohci"); - -static struct platform_driver ohci_hcd_pnx8550_driver = { - .driver = { - .name = "pnx8550-ohci", - .owner = THIS_MODULE, - }, - .probe = ohci_hcd_pnx8550_drv_probe, - .remove = ohci_hcd_pnx8550_drv_remove, -}; - diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c index e27d5ae2b9e..64c2ed9ff95 100644 --- a/drivers/usb/host/ohci-ppc-of.c +++ b/drivers/usb/host/ohci-ppc-of.c @@ -19,7 +19,7 @@ #include <asm/prom.h> -static int __devinit +static int ohci_ppc_of_start(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci(hcd); @@ -81,7 +81,7 @@ static const struct hc_driver ohci_ppc_of_hc_driver = { }; -static int __devinit ohci_hcd_ppc_of_probe(struct platform_device *op) +static int ohci_hcd_ppc_of_probe(struct platform_device *op) { struct device_node *dn = op->dev.of_node; struct usb_hcd *hcd; diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c deleted file mode 100644 index 185c39ed81b..00000000000 --- a/drivers/usb/host/ohci-ppc-soc.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * OHCI HCD (Host Controller Driver) for USB. - * - * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> - * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> - * (C) Copyright 2002 Hewlett-Packard Company - * (C) Copyright 2003-2005 MontaVista Software Inc. - * - * Bus Glue for PPC On-Chip OHCI driver - * Tested on Freescale MPC5200 and IBM STB04xxx - * - * Modified by Dale Farnsworth <dale@farnsworth.org> from ohci-sa1111.c - * - * This file is licenced under the GPL. - */ - -#include <linux/platform_device.h> -#include <linux/signal.h> - -/* configure so an HC device and id are always provided */ -/* always called with process context; sleeping is OK */ - -/** - * usb_hcd_ppc_soc_probe - initialize On-Chip HCDs - * Context: !in_interrupt() - * - * Allocates basic resources for this USB host controller. - * - * Store this function in the HCD's struct pci_driver as probe(). - */ -static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver, - struct platform_device *pdev) -{ - int retval; - struct usb_hcd *hcd; - struct ohci_hcd *ohci; - struct resource *res; - int irq; - - pr_debug("initializing PPC-SOC USB Controller\n"); - - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { - pr_debug("%s: no irq\n", __FILE__); - return -ENODEV; - } - irq = res->start; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - pr_debug("%s: no reg addr\n", __FILE__); - return -ENODEV; - } - - hcd = usb_create_hcd(driver, &pdev->dev, "PPC-SOC USB"); - if (!hcd) - return -ENOMEM; - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - pr_debug("%s: request_mem_region failed\n", __FILE__); - retval = -EBUSY; - goto err1; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - pr_debug("%s: ioremap failed\n", __FILE__); - retval = -ENOMEM; - goto err2; - } - - ohci = hcd_to_ohci(hcd); - ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC; - -#ifdef CONFIG_PPC_MPC52xx - /* MPC52xx doesn't need frame_no shift */ - ohci->flags |= OHCI_QUIRK_FRAME_NO; -#endif - ohci_hcd_init(ohci); - - retval = usb_add_hcd(hcd, irq, 0); - if (retval == 0) - return retval; - - pr_debug("Removing PPC-SOC USB Controller\n"); - - iounmap(hcd->regs); - err2: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - err1: - usb_put_hcd(hcd); - return retval; -} - - -/* may be called without controller electrically present */ -/* may be called with controller, bus, and devices active */ - -/** - * usb_hcd_ppc_soc_remove - shutdown processing for On-Chip HCDs - * @pdev: USB Host Controller being removed - * Context: !in_interrupt() - * - * Reverses the effect of usb_hcd_ppc_soc_probe(). - * It is always called from a thread - * context, normally "rmmod", "apmd", or something similar. - * - */ -static void usb_hcd_ppc_soc_remove(struct usb_hcd *hcd, - struct platform_device *pdev) -{ - usb_remove_hcd(hcd); - - pr_debug("stopping PPC-SOC USB Controller\n"); - - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - usb_put_hcd(hcd); -} - -static int __devinit -ohci_ppc_soc_start(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - int ret; - - if ((ret = ohci_init(ohci)) < 0) - return ret; - - if ((ret = ohci_run(ohci)) < 0) { - dev_err(hcd->self.controller, "can't start %s\n", - hcd->self.bus_name); - ohci_stop(hcd); - return ret; - } - - return 0; -} - -static const struct hc_driver ohci_ppc_soc_hc_driver = { - .description = hcd_name, - .hcd_priv_size = sizeof(struct ohci_hcd), - - /* - * generic hardware linkage - */ - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .start = ohci_ppc_soc_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - -static int ohci_hcd_ppc_soc_drv_probe(struct platform_device *pdev) -{ - int ret; - - if (usb_disabled()) - return -ENODEV; - - ret = usb_hcd_ppc_soc_probe(&ohci_ppc_soc_hc_driver, pdev); - return ret; -} - -static int ohci_hcd_ppc_soc_drv_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_hcd_ppc_soc_remove(hcd, pdev); - return 0; -} - -static struct platform_driver ohci_hcd_ppc_soc_driver = { - .probe = ohci_hcd_ppc_soc_drv_probe, - .remove = ohci_hcd_ppc_soc_drv_remove, - .shutdown = usb_hcd_platform_shutdown, -#ifdef CONFIG_PM - /*.suspend = ohci_hcd_ppc_soc_drv_suspend,*/ - /*.resume = ohci_hcd_ppc_soc_drv_resume,*/ -#endif - .driver = { - .name = "ppc-soc-ohci", - .owner = THIS_MODULE, - }, -}; - -MODULE_ALIAS("platform:ppc-soc-ohci"); diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c index 2ee1d8d713d..7d35cd9e286 100644 --- a/drivers/usb/host/ohci-ps3.c +++ b/drivers/usb/host/ohci-ps3.c @@ -30,7 +30,7 @@ static int ps3_ohci_hc_reset(struct usb_hcd *hcd) return ohci_init(ohci); } -static int __devinit ps3_ohci_hc_start(struct usb_hcd *hcd) +static int ps3_ohci_hc_start(struct usb_hcd *hcd) { int result; struct ohci_hcd *ohci = hcd_to_ohci(hcd); @@ -76,7 +76,7 @@ static const struct hc_driver ps3_ohci_hc_driver = { #endif }; -static int __devinit ps3_ohci_probe(struct ps3_system_bus_device *dev) +static int ps3_ohci_probe(struct ps3_system_bus_device *dev) { int result; struct usb_hcd *hcd; diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 2bf11440b01..efe71f3ca47 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -284,7 +284,7 @@ MODULE_DEVICE_TABLE(of, pxa_ohci_dt_ids); static u64 pxa_ohci_dma_mask = DMA_BIT_MASK(32); -static int __devinit ohci_pxa_of_init(struct platform_device *pdev) +static int ohci_pxa_of_init(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct pxaohci_platform_data *pdata; @@ -330,7 +330,7 @@ static int __devinit ohci_pxa_of_init(struct platform_device *pdev) return 0; } #else -static int __devinit ohci_pxa_of_init(struct platform_device *pdev) +static int ohci_pxa_of_init(struct platform_device *pdev) { return 0; } @@ -471,7 +471,7 @@ void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev) /*-------------------------------------------------------------------------*/ -static int __devinit +static int ohci_pxa27x_start (struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); @@ -591,7 +591,7 @@ static int ohci_hcd_pxa27x_drv_resume(struct device *dev) /* Select Power Management Mode */ pxa27x_ohci_select_pmm(ohci, inf->port_mode); - ohci_finish_controller_resume(hcd); + ohci_resume(hcd, false); return 0; } diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c index c5a1ea9145f..88731b7c5f4 100644 --- a/drivers/usb/host/ohci-q.c +++ b/drivers/usb/host/ohci-q.c @@ -44,6 +44,7 @@ __acquires(ohci->lock) // ASSERT (urb->hcpriv != 0); urb_free_priv (ohci, urb->hcpriv); + urb->hcpriv = NULL; if (likely(status == -EINPROGRESS)) status = 0; @@ -596,7 +597,6 @@ static void td_submit_urb ( urb_priv->ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_C); } - urb_priv->td_cnt = 0; list_add (&urb_priv->pending, &ohci->pending); if (data_len) @@ -672,7 +672,8 @@ static void td_submit_urb ( * we could often reduce the number of TDs here. */ case PIPE_ISOCHRONOUS: - for (cnt = 0; cnt < urb->number_of_packets; cnt++) { + for (cnt = urb_priv->td_cnt; cnt < urb->number_of_packets; + cnt++) { int frame = urb->start_frame; // FIXME scheduling should handle frame counter @@ -1128,6 +1129,25 @@ dl_done_list (struct ohci_hcd *ohci) while (td) { struct td *td_next = td->next_dl_td; + struct ed *ed = td->ed; + + /* + * Some OHCI controllers (NVIDIA for sure, maybe others) + * occasionally forget to add TDs to the done queue. Since + * TDs for a given endpoint are always processed in order, + * if we find a TD on the donelist then all of its + * predecessors must be finished as well. + */ + for (;;) { + struct td *td2; + + td2 = list_first_entry(&ed->td_list, struct td, + td_list); + if (td2 == td) + break; + takeback_td(ohci, td2); + } + takeback_td(ohci, td); td = td_next; } diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 0d2309ca471..e125770b893 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -323,8 +323,6 @@ usb_hcd_s3c2410_remove(struct usb_hcd *hcd, struct platform_device *dev) { usb_remove_hcd(hcd); s3c2410_stop_hc(dev); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); } @@ -353,35 +351,28 @@ static int usb_hcd_s3c2410_probe(const struct hc_driver *driver, hcd->rsrc_start = dev->resource[0].start; hcd->rsrc_len = resource_size(&dev->resource[0]); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - dev_err(&dev->dev, "request_mem_region failed\n"); - retval = -EBUSY; + hcd->regs = devm_ioremap_resource(&dev->dev, &dev->resource[0]); + if (IS_ERR(hcd->regs)) { + retval = PTR_ERR(hcd->regs); goto err_put; } - clk = clk_get(&dev->dev, "usb-host"); + clk = devm_clk_get(&dev->dev, "usb-host"); if (IS_ERR(clk)) { dev_err(&dev->dev, "cannot get usb-host clock\n"); retval = PTR_ERR(clk); - goto err_mem; + goto err_put; } - usb_clk = clk_get(&dev->dev, "usb-bus-host"); + usb_clk = devm_clk_get(&dev->dev, "usb-bus-host"); if (IS_ERR(usb_clk)) { dev_err(&dev->dev, "cannot get usb-bus-host clock\n"); retval = PTR_ERR(usb_clk); - goto err_clk; + goto err_put; } s3c2410_start_hc(dev, hcd); - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - dev_err(&dev->dev, "ioremap failed\n"); - retval = -ENOMEM; - goto err_ioremap; - } - ohci_hcd_init(hcd_to_ohci(hcd)); retval = usb_add_hcd(hcd, dev->resource[1].start, 0); @@ -392,14 +383,6 @@ static int usb_hcd_s3c2410_probe(const struct hc_driver *driver, err_ioremap: s3c2410_stop_hc(dev); - iounmap(hcd->regs); - clk_put(usb_clk); - - err_clk: - clk_put(clk); - - err_mem: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err_put: usb_put_hcd(hcd); @@ -474,12 +457,12 @@ static const struct hc_driver ohci_s3c2410_hc_driver = { /* device driver */ -static int __devinit ohci_hcd_s3c2410_drv_probe(struct platform_device *pdev) +static int ohci_hcd_s3c2410_drv_probe(struct platform_device *pdev) { return usb_hcd_s3c2410_probe(&ohci_s3c2410_hc_driver, pdev); } -static int __devexit ohci_hcd_s3c2410_drv_remove(struct platform_device *pdev) +static int ohci_hcd_s3c2410_drv_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); @@ -524,8 +507,7 @@ static int ohci_hcd_s3c2410_drv_resume(struct device *dev) s3c2410_start_hc(pdev, hcd); - set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - ohci_finish_controller_resume(hcd); + ohci_resume(hcd, false); return 0; } @@ -541,7 +523,7 @@ static const struct dev_pm_ops ohci_hcd_s3c2410_pm_ops = { static struct platform_driver ohci_hcd_s3c2410_driver = { .probe = ohci_hcd_s3c2410_drv_probe, - .remove = __devexit_p(ohci_hcd_s3c2410_drv_remove), + .remove = ohci_hcd_s3c2410_drv_remove, .shutdown = usb_hcd_platform_shutdown, .driver = { .owner = THIS_MODULE, diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index b6cc9252092..17b2a7dad77 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -63,7 +63,7 @@ static int ohci_sa1111_reset(struct usb_hcd *hcd) return ohci_init(ohci); } -static int __devinit ohci_sa1111_start(struct usb_hcd *hcd) +static int ohci_sa1111_start(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci(hcd); int ret; diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c deleted file mode 100644 index 76a20c27836..00000000000 --- a/drivers/usb/host/ohci-sh.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * OHCI HCD (Host Controller Driver) for USB. - * - * Copyright (C) 2008 Renesas Solutions Corp. - * - * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - */ - -#include <linux/platform_device.h> - -static int ohci_sh_start(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - - ohci_hcd_init(ohci); - ohci_init(ohci); - ohci_run(ohci); - return 0; -} - -static const struct hc_driver ohci_sh_hc_driver = { - .description = hcd_name, - .product_desc = "SuperH OHCI", - .hcd_priv_size = sizeof(struct ohci_hcd), - - /* - * generic hardware linkage - */ - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .start = ohci_sh_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - -/*-------------------------------------------------------------------------*/ - -static int ohci_hcd_sh_probe(struct platform_device *pdev) -{ - struct resource *res = NULL; - struct usb_hcd *hcd = NULL; - int irq = -1; - int ret; - - if (usb_disabled()) - return -ENODEV; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "platform_get_resource error.\n"); - return -ENODEV; - } - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "platform_get_irq error.\n"); - return -ENODEV; - } - - /* initialize hcd */ - hcd = usb_create_hcd(&ohci_sh_hc_driver, &pdev->dev, (char *)hcd_name); - if (!hcd) { - dev_err(&pdev->dev, "Failed to create hcd\n"); - return -ENOMEM; - } - - hcd->regs = (void __iomem *)res->start; - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - ret = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (ret != 0) { - dev_err(&pdev->dev, "Failed to add hcd\n"); - usb_put_hcd(hcd); - return ret; - } - - return ret; -} - -static int ohci_hcd_sh_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_remove_hcd(hcd); - usb_put_hcd(hcd); - - return 0; -} - -static struct platform_driver ohci_hcd_sh_driver = { - .probe = ohci_hcd_sh_probe, - .remove = ohci_hcd_sh_remove, - .shutdown = usb_hcd_platform_shutdown, - .driver = { - .name = "sh_ohci", - .owner = THIS_MODULE, - }, -}; - -MODULE_ALIAS("platform:sh_ohci"); diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c index 5596ac2ba1c..3b5b908fd47 100644 --- a/drivers/usb/host/ohci-sm501.c +++ b/drivers/usb/host/ohci-sm501.c @@ -238,7 +238,7 @@ static int ohci_sm501_resume(struct platform_device *pdev) ohci->next_statechange = jiffies; sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 1); - ohci_finish_controller_resume(hcd); + ohci_resume(hcd, false); return 0; } #else diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c index fc7305ee3c9..9020bf0e2ec 100644 --- a/drivers/usb/host/ohci-spear.c +++ b/drivers/usb/host/ohci-spear.c @@ -33,7 +33,7 @@ static void spear_stop_ohci(struct spear_ohci *ohci) clk_disable_unprepare(ohci->clk); } -static int __devinit ohci_spear_start(struct usb_hcd *hcd) +static int ohci_spear_start(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci(hcd); int ret; @@ -101,13 +101,11 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) struct spear_ohci *ohci_p; struct resource *res; int retval, irq; - char clk_name[20] = "usbh_clk"; - static int instance = -1; irq = platform_get_irq(pdev, 0); if (irq < 0) { retval = irq; - goto fail_irq_get; + goto fail; } /* @@ -118,47 +116,39 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &spear_ohci_dma_mask; - /* - * Increment the device instance, when probing via device-tree - */ - if (pdev->id < 0) - instance++; - else - instance = pdev->id; - sprintf(clk_name, "usbh.%01d_clk", instance); - - usbh_clk = clk_get(NULL, clk_name); + usbh_clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(usbh_clk)) { dev_err(&pdev->dev, "Error getting interface clock\n"); retval = PTR_ERR(usbh_clk); - goto fail_get_usbh_clk; + goto fail; } hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { retval = -ENOMEM; - goto fail_create_hcd; + goto fail; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { retval = -ENODEV; - goto fail_request_resource; + goto err_put_hcd; } hcd->rsrc_start = pdev->resource[0].start; hcd->rsrc_len = resource_size(res); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + if (!devm_request_mem_region(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len, + hcd_name)) { dev_dbg(&pdev->dev, "request_mem_region failed\n"); retval = -EBUSY; - goto fail_request_resource; + goto err_put_hcd; } - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_ioremap(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len); if (!hcd->regs) { dev_dbg(&pdev->dev, "ioremap failed\n"); retval = -ENOMEM; - goto fail_ioremap; + goto err_put_hcd; } ohci_p = (struct spear_ohci *)hcd_to_ohci(hcd); @@ -171,15 +161,9 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) return retval; spear_stop_ohci(ohci_p); - iounmap(hcd->regs); -fail_ioremap: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -fail_request_resource: +err_put_hcd: usb_put_hcd(hcd); -fail_create_hcd: - clk_put(usbh_clk); -fail_get_usbh_clk: -fail_irq_get: +fail: dev_err(&pdev->dev, "init fail, %d\n", retval); return retval; @@ -194,12 +178,8 @@ static int spear_ohci_hcd_drv_remove(struct platform_device *pdev) if (ohci_p->clk) spear_stop_ohci(ohci_p); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); - if (ohci_p->clk) - clk_put(ohci_p->clk); platform_set_drvdata(pdev, NULL); return 0; } @@ -231,12 +211,12 @@ static int spear_ohci_hcd_drv_resume(struct platform_device *dev) ohci->next_statechange = jiffies; spear_start_ohci(ohci_p); - ohci_finish_controller_resume(hcd); + ohci_resume(hcd, false); return 0; } #endif -static struct of_device_id spear_ohci_id_table[] __devinitdata = { +static struct of_device_id spear_ohci_id_table[] = { { .compatible = "st,spear600-ohci", }, { }, }; diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c index 60c2b0722f2..5e3a6deb62b 100644 --- a/drivers/usb/host/ohci-tmio.c +++ b/drivers/usb/host/ohci-tmio.c @@ -128,7 +128,8 @@ static void tmio_start_hc(struct platform_device *dev) tmio_iowrite8(2, tmio->ccr + CCR_INTC); dev_info(&dev->dev, "revision %d @ 0x%08llx, irq %d\n", - tmio_ioread8(tmio->ccr + CCR_REVID), hcd->rsrc_start, hcd->irq); + tmio_ioread8(tmio->ccr + CCR_REVID), + (u64) hcd->rsrc_start, hcd->irq); } static int ohci_tmio_start(struct usb_hcd *hcd) @@ -184,7 +185,7 @@ static const struct hc_driver ohci_tmio_hc_driver = { /*-------------------------------------------------------------------------*/ static struct platform_driver ohci_hcd_tmio_driver; -static int __devinit ohci_hcd_tmio_drv_probe(struct platform_device *dev) +static int ohci_hcd_tmio_drv_probe(struct platform_device *dev) { const struct mfd_cell *cell = mfd_get_cell(dev); struct resource *regs = platform_get_resource(dev, IORESOURCE_MEM, 0); @@ -271,7 +272,7 @@ err_usb_create_hcd: return ret; } -static int __devexit ohci_hcd_tmio_drv_remove(struct platform_device *dev) +static int ohci_hcd_tmio_drv_remove(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); struct tmio_hcd *tmio = hcd_to_tmio(hcd); @@ -352,7 +353,7 @@ static int ohci_hcd_tmio_drv_resume(struct platform_device *dev) spin_unlock_irqrestore(&tmio->lock, flags); - ohci_finish_controller_resume(hcd); + ohci_resume(hcd, false); return 0; } @@ -363,7 +364,7 @@ static int ohci_hcd_tmio_drv_resume(struct platform_device *dev) static struct platform_driver ohci_hcd_tmio_driver = { .probe = ohci_hcd_tmio_drv_probe, - .remove = __devexit_p(ohci_hcd_tmio_drv_remove), + .remove = ohci_hcd_tmio_drv_remove, .shutdown = usb_hcd_platform_shutdown, .suspend = ohci_hcd_tmio_drv_suspend, .resume = ohci_hcd_tmio_drv_resume, diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c deleted file mode 100644 index 84201cd1a47..00000000000 --- a/drivers/usb/host/ohci-xls.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * OHCI HCD for Netlogic XLS processors. - * - * (C) Copyright 2011 Netlogic Microsystems Inc. - * - * Based on ohci-au1xxx.c, and other Linux OHCI drivers. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#include <linux/platform_device.h> -#include <linux/signal.h> - -static int ohci_xls_probe_internal(const struct hc_driver *driver, - struct platform_device *dev) -{ - struct resource *res; - struct usb_hcd *hcd; - int retval, irq; - - /* Get our IRQ from an earlier registered Platform Resource */ - irq = platform_get_irq(dev, 0); - if (irq < 0) { - dev_err(&dev->dev, "Found HC with no IRQ\n"); - return -ENODEV; - } - - /* Get our Memory Handle */ - res = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&dev->dev, "MMIO Handle incorrect!\n"); - return -ENODEV; - } - - hcd = usb_create_hcd(driver, &dev->dev, "XLS"); - if (!hcd) { - retval = -ENOMEM; - goto err1; - } - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, - driver->description)) { - dev_dbg(&dev->dev, "Controller already in use\n"); - retval = -EBUSY; - goto err2; - } - - hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); - if (hcd->regs == NULL) { - dev_dbg(&dev->dev, "error mapping memory\n"); - retval = -EFAULT; - goto err3; - } - - retval = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (retval != 0) - goto err4; - return retval; - -err4: - iounmap(hcd->regs); -err3: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -err2: - usb_put_hcd(hcd); -err1: - dev_err(&dev->dev, "init fail, %d\n", retval); - return retval; -} - -static int ohci_xls_reset(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - - ohci_hcd_init(ohci); - return ohci_init(ohci); -} - -static int __devinit ohci_xls_start(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci; - int ret; - - ohci = hcd_to_ohci(hcd); - ret = ohci_run(ohci); - if (ret < 0) { - dev_err(hcd->self.controller, "can't start %s\n", - hcd->self.bus_name); - ohci_stop(hcd); - return ret; - } - return 0; -} - -static struct hc_driver ohci_xls_hc_driver = { - .description = hcd_name, - .product_desc = "XLS OHCI Host Controller", - .hcd_priv_size = sizeof(struct ohci_hcd), - .irq = ohci_irq, - .flags = HCD_MEMORY | HCD_USB11, - .reset = ohci_xls_reset, - .start = ohci_xls_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - .get_frame_number = ohci_get_frame, - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - -static int ohci_xls_probe(struct platform_device *dev) -{ - int ret; - - pr_debug("In ohci_xls_probe"); - if (usb_disabled()) - return -ENODEV; - ret = ohci_xls_probe_internal(&ohci_xls_hc_driver, dev); - return ret; -} - -static int ohci_xls_remove(struct platform_device *dev) -{ - struct usb_hcd *hcd = platform_get_drvdata(dev); - - usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - usb_put_hcd(hcd); - return 0; -} - -static struct platform_driver ohci_xls_driver = { - .probe = ohci_xls_probe, - .remove = ohci_xls_remove, - .shutdown = usb_hcd_platform_shutdown, - .driver = { - .name = "ohci-xls-0", - .owner = THIS_MODULE, - }, -}; diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 39f9e4a9a2d..4c338ec03a0 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -443,7 +443,7 @@ static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask) #define pio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_IO) #define mmio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_MEMORY) -static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev) +static void quirk_usb_handoff_uhci(struct pci_dev *pdev) { unsigned long base = 0; int i; @@ -461,12 +461,12 @@ static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev) uhci_check_and_reset_hc(pdev, base); } -static int __devinit mmio_resource_enabled(struct pci_dev *pdev, int idx) +static int mmio_resource_enabled(struct pci_dev *pdev, int idx) { return pci_resource_start(pdev, idx) && mmio_enabled(pdev); } -static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) +static void quirk_usb_handoff_ohci(struct pci_dev *pdev) { void __iomem *base; u32 control; @@ -533,7 +533,7 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) iounmap(base); } -static const struct dmi_system_id __devinitconst ehci_dmi_nohandoff_table[] = { +static const struct dmi_system_id ehci_dmi_nohandoff_table[] = { { /* Pegatron Lucid (ExoPC) */ .matches = { @@ -558,7 +558,7 @@ static const struct dmi_system_id __devinitconst ehci_dmi_nohandoff_table[] = { { } }; -static void __devinit ehci_bios_handoff(struct pci_dev *pdev, +static void ehci_bios_handoff(struct pci_dev *pdev, void __iomem *op_reg_base, u32 cap, u8 offset) { @@ -626,7 +626,7 @@ static void __devinit ehci_bios_handoff(struct pci_dev *pdev, writel(0, op_reg_base + EHCI_CONFIGFLAG); } -static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) +static void quirk_usb_disable_ehci(struct pci_dev *pdev) { void __iomem *base, *op_reg_base; u32 hcc_params, cap, val; @@ -723,6 +723,7 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done, } #define PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI 0x8C31 +#define PCI_DEVICE_ID_INTEL_LYNX_POINT_LP_XHCI 0x9C31 bool usb_is_intel_ppt_switchable_xhci(struct pci_dev *pdev) { @@ -736,7 +737,8 @@ bool usb_is_intel_lpt_switchable_xhci(struct pci_dev *pdev) { return pdev->class == PCI_CLASS_SERIAL_USB_XHCI && pdev->vendor == PCI_VENDOR_ID_INTEL && - pdev->device == PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI; + (pdev->device == PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_LYNX_POINT_LP_XHCI); } bool usb_is_intel_switchable_xhci(struct pci_dev *pdev) @@ -778,6 +780,7 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) "defaulting to EHCI.\n"); dev_warn(&xhci_pdev->dev, "USB 3.0 devices will work at USB 2.0 speeds.\n"); + usb_disable_xhci_ports(xhci_pdev); return; } @@ -841,7 +844,7 @@ EXPORT_SYMBOL_GPL(usb_disable_xhci_ports); * and then waits 5 seconds for the BIOS to hand over control. * If we timeout, assume the BIOS is broken and take control anyway. */ -static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) +static void quirk_usb_handoff_xhci(struct pci_dev *pdev) { void __iomem *base; int ext_cap_offset; @@ -941,7 +944,7 @@ hc_init: iounmap(base); } -static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) +static void quirk_usb_early_handoff(struct pci_dev *pdev) { /* Skip Netlogic mips SoC's internal PCI USB controller. * This device does not need/support EHCI/OHCI handoff diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index fcc09e5ec0a..a6fd8f5371d 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -2036,10 +2036,8 @@ static void collect_usb_address_map(struct usb_device *udev, unsigned long *map) udev->parent->descriptor.bDeviceClass == USB_CLASS_HUB) map[udev->devnum/32] |= (1 << (udev->devnum % 32)); - usb_hub_for_each_child(udev, chix, childdev) { - if (childdev) - collect_usb_address_map(childdev, map); - } + usb_hub_for_each_child(udev, chix, childdev) + collect_usb_address_map(childdev, map); } /* this function must be called with interrupt disabled */ @@ -2393,7 +2391,7 @@ static const struct dev_pm_ops r8a66597_dev_pm_ops = { #define R8A66597_DEV_PM_OPS NULL #endif -static int __devexit r8a66597_remove(struct platform_device *pdev) +static int r8a66597_remove(struct platform_device *pdev) { struct r8a66597 *r8a66597 = dev_get_drvdata(&pdev->dev); struct usb_hcd *hcd = r8a66597_to_hcd(r8a66597); @@ -2407,7 +2405,7 @@ static int __devexit r8a66597_remove(struct platform_device *pdev) return 0; } -static int __devinit r8a66597_probe(struct platform_device *pdev) +static int r8a66597_probe(struct platform_device *pdev) { char clk_name[8]; struct resource *res = NULL, *ires; @@ -2534,7 +2532,7 @@ clean_up: static struct platform_driver r8a66597_driver = { .probe = r8a66597_probe, - .remove = __devexit_p(r8a66597_remove), + .remove = r8a66597_remove, .driver = { .name = (char *) hcd_name, .owner = THIS_MODULE, diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 619b05f42d4..d62f0404baa 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1595,7 +1595,7 @@ static struct hc_driver sl811h_hc_driver = { /*-------------------------------------------------------------------------*/ -static int __devexit +static int sl811h_remove(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); @@ -1618,7 +1618,7 @@ sl811h_remove(struct platform_device *dev) return 0; } -static int __devinit +static int sl811h_probe(struct platform_device *dev) { struct usb_hcd *hcd; @@ -1808,7 +1808,7 @@ sl811h_resume(struct platform_device *dev) /* this driver is exported so sl811_cs can depend on it */ struct platform_driver sl811h_driver = { .probe = sl811h_probe, - .remove = __devexit_p(sl811h_remove), + .remove = sl811h_remove, .suspend = sl811h_suspend, .resume = sl811h_resume, diff --git a/drivers/usb/host/ssb-hcd.c b/drivers/usb/host/ssb-hcd.c index c2a29faba07..74af2c6287d 100644 --- a/drivers/usb/host/ssb-hcd.c +++ b/drivers/usb/host/ssb-hcd.c @@ -39,7 +39,7 @@ struct ssb_hcd_device { u32 enable_flags; }; -static void __devinit ssb_hcd_5354wa(struct ssb_device *dev) +static void ssb_hcd_5354wa(struct ssb_device *dev) { #ifdef CONFIG_SSB_DRIVER_MIPS /* Work around for 5354 failures */ @@ -53,7 +53,7 @@ static void __devinit ssb_hcd_5354wa(struct ssb_device *dev) #endif } -static void __devinit ssb_hcd_usb20wa(struct ssb_device *dev) +static void ssb_hcd_usb20wa(struct ssb_device *dev) { if (dev->id.coreid == SSB_DEV_USB20_HOST) { /* @@ -80,7 +80,7 @@ static void __devinit ssb_hcd_usb20wa(struct ssb_device *dev) } /* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */ -static u32 __devinit ssb_hcd_init_chip(struct ssb_device *dev) +static u32 ssb_hcd_init_chip(struct ssb_device *dev) { u32 flags = 0; @@ -101,8 +101,7 @@ static const struct usb_ehci_pdata ehci_pdata = { static const struct usb_ohci_pdata ohci_pdata = { }; -static struct platform_device * __devinit -ssb_hcd_create_pdev(struct ssb_device *dev, bool ohci, u32 addr, u32 len) +static struct platform_device *ssb_hcd_create_pdev(struct ssb_device *dev, bool ohci, u32 addr, u32 len) { struct platform_device *hci_dev; struct resource hci_res[2]; @@ -148,7 +147,7 @@ err_alloc: return ERR_PTR(ret); } -static int __devinit ssb_hcd_probe(struct ssb_device *dev, +static int ssb_hcd_probe(struct ssb_device *dev, const struct ssb_device_id *id) { int err, tmp; @@ -207,7 +206,7 @@ err_free_usb_dev: return err; } -static void __devexit ssb_hcd_remove(struct ssb_device *dev) +static void ssb_hcd_remove(struct ssb_device *dev) { struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev); struct platform_device *ohci_dev = usb_dev->ohci_dev; @@ -221,7 +220,7 @@ static void __devexit ssb_hcd_remove(struct ssb_device *dev) ssb_device_disable(dev, 0); } -static void __devexit ssb_hcd_shutdown(struct ssb_device *dev) +static void ssb_hcd_shutdown(struct ssb_device *dev) { ssb_device_disable(dev, 0); } @@ -249,7 +248,7 @@ static int ssb_hcd_resume(struct ssb_device *dev) #define ssb_hcd_resume NULL #endif /* CONFIG_PM */ -static const struct ssb_device_id ssb_hcd_table[] __devinitconst = { +static const struct ssb_device_id ssb_hcd_table[] = { SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV), SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV), SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV), @@ -261,7 +260,7 @@ static struct ssb_driver ssb_hcd_driver = { .name = KBUILD_MODNAME, .id_table = ssb_hcd_table, .probe = ssb_hcd_probe, - .remove = __devexit_p(ssb_hcd_remove), + .remove = ssb_hcd_remove, .shutdown = ssb_hcd_shutdown, .suspend = ssb_hcd_suspend, .resume = ssb_hcd_resume, diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index dbbd1ba2522..5efdffe3236 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -2990,7 +2990,7 @@ static struct hc_driver u132_hc_driver = { * synchronously - but instead should immediately stop activity to the * device and asynchronously call usb_remove_hcd() */ -static int __devexit u132_remove(struct platform_device *pdev) +static int u132_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); if (hcd) { @@ -3084,7 +3084,7 @@ static void u132_initialise(struct u132 *u132, struct platform_device *pdev) mutex_unlock(&u132->sw_lock); } -static int __devinit u132_probe(struct platform_device *pdev) +static int u132_probe(struct platform_device *pdev) { struct usb_hcd *hcd; int retval; @@ -3212,7 +3212,7 @@ static int u132_resume(struct platform_device *pdev) */ static struct platform_driver u132_platform_driver = { .probe = u132_probe, - .remove = __devexit_p(u132_remove), + .remove = u132_remove, .suspend = u132_suspend, .resume = u132_resume, .driver = { diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c index fc0b0daac93..45573754652 100644 --- a/drivers/usb/host/uhci-debug.c +++ b/drivers/usb/host/uhci-debug.c @@ -16,6 +16,8 @@ #include "uhci-hcd.h" +#define EXTRA_SPACE 1024 + static struct dentry *uhci_debugfs_root; #ifdef DEBUG @@ -44,10 +46,6 @@ static int uhci_show_td(struct uhci_hcd *uhci, struct uhci_td *td, char *buf, char *spid; u32 status, token; - /* Try to make sure there's enough memory */ - if (len < 160) - return 0; - status = td_status(uhci, td); out += sprintf(out, "%*s[%p] link (%08x) ", space, "", td, hc32_to_cpu(uhci, td->link)); @@ -64,6 +62,8 @@ static int uhci_show_td(struct uhci_hcd *uhci, struct uhci_td *td, char *buf, (status & TD_CTRL_CRCTIMEO) ? "CRC/Timeo " : "", (status & TD_CTRL_BITSTUFF) ? "BitStuff " : "", status & 0x7ff); + if (out - buf > len) + goto done; token = td_token(uhci, td); switch (uhci_packetid(token)) { @@ -90,6 +90,9 @@ static int uhci_show_td(struct uhci_hcd *uhci, struct uhci_td *td, char *buf, spid); out += sprintf(out, "(buf=%08x)\n", hc32_to_cpu(uhci, td->buffer)); +done: + if (out - buf > len) + out += sprintf(out, " ...\n"); return out - buf; } @@ -101,8 +104,6 @@ static int uhci_show_urbp(struct uhci_hcd *uhci, struct urb_priv *urbp, int i, nactive, ninactive; char *ptype; - if (len < 200) - return 0; out += sprintf(out, "urb_priv [%p] ", urbp); out += sprintf(out, "urb [%p] ", urbp->urb); @@ -110,6 +111,8 @@ static int uhci_show_urbp(struct uhci_hcd *uhci, struct urb_priv *urbp, out += sprintf(out, "Dev=%d ", usb_pipedevice(urbp->urb->pipe)); out += sprintf(out, "EP=%x(%s) ", usb_pipeendpoint(urbp->urb->pipe), (usb_pipein(urbp->urb->pipe) ? "IN" : "OUT")); + if (out - buf > len) + goto done; switch (usb_pipetype(urbp->urb->pipe)) { case PIPE_ISOCHRONOUS: ptype = "ISO"; break; @@ -128,6 +131,9 @@ static int uhci_show_urbp(struct uhci_hcd *uhci, struct urb_priv *urbp, out += sprintf(out, " Unlinked=%d", urbp->urb->unlinked); out += sprintf(out, "\n"); + if (out - buf > len) + goto done; + i = nactive = ninactive = 0; list_for_each_entry(td, &urbp->td_list, list) { if (urbp->qh->type != USB_ENDPOINT_XFER_ISOC && @@ -135,6 +141,8 @@ static int uhci_show_urbp(struct uhci_hcd *uhci, struct urb_priv *urbp, out += sprintf(out, "%*s%d: ", space + 2, "", i); out += uhci_show_td(uhci, td, out, len - (out - buf), 0); + if (out - buf > len) + goto tail; } else { if (td_status(uhci, td) & TD_CTRL_ACTIVE) ++nactive; @@ -143,10 +151,13 @@ static int uhci_show_urbp(struct uhci_hcd *uhci, struct urb_priv *urbp, } } if (nactive + ninactive > 0) - out += sprintf(out, "%*s[skipped %d inactive and %d active " - "TDs]\n", + out += sprintf(out, + "%*s[skipped %d inactive and %d active TDs]\n", space, "", ninactive, nactive); - +done: + if (out - buf > len) + out += sprintf(out, " ...\n"); +tail: return out - buf; } @@ -158,10 +169,6 @@ static int uhci_show_qh(struct uhci_hcd *uhci, __hc32 element = qh_element(qh); char *qtype; - /* Try to make sure there's enough memory */ - if (len < 80 * 7) - return 0; - switch (qh->type) { case USB_ENDPOINT_XFER_ISOC: qtype = "ISO"; break; case USB_ENDPOINT_XFER_INT: qtype = "INT"; break; @@ -175,13 +182,15 @@ static int uhci_show_qh(struct uhci_hcd *uhci, hc32_to_cpu(uhci, qh->link), hc32_to_cpu(uhci, element)); if (qh->type == USB_ENDPOINT_XFER_ISOC) - out += sprintf(out, "%*s period %d phase %d load %d us, " - "frame %x desc [%p]\n", + out += sprintf(out, + "%*s period %d phase %d load %d us, frame %x desc [%p]\n", space, "", qh->period, qh->phase, qh->load, qh->iso_frame, qh->iso_packet_desc); else if (qh->type == USB_ENDPOINT_XFER_INT) out += sprintf(out, "%*s period %d phase %d load %d us\n", space, "", qh->period, qh->phase, qh->load); + if (out - buf > len) + goto done; if (element & UHCI_PTR_QH(uhci)) out += sprintf(out, "%*s Element points to QH (bug?)\n", space, ""); @@ -195,11 +204,17 @@ static int uhci_show_qh(struct uhci_hcd *uhci, if (!(element & ~(UHCI_PTR_QH(uhci) | UHCI_PTR_DEPTH(uhci)))) out += sprintf(out, "%*s Element is NULL (bug?)\n", space, ""); + if (out - buf > len) + goto done; + if (list_empty(&qh->queue)) { out += sprintf(out, "%*s queue is empty\n", space, ""); - if (qh == uhci->skel_async_qh) + if (qh == uhci->skel_async_qh) { out += uhci_show_td(uhci, uhci->term_td, out, len - (out - buf), 0); + if (out - buf > len) + goto tail; + } } else { struct urb_priv *urbp = list_entry(qh->queue.next, struct urb_priv, node); @@ -211,9 +226,12 @@ static int uhci_show_qh(struct uhci_hcd *uhci, space, ""); i = nurbs = 0; list_for_each_entry(urbp, &qh->queue, node) { - if (++i <= 10) + if (++i <= 10) { out += uhci_show_urbp(uhci, urbp, out, len - (out - buf), space + 2); + if (out - buf > len) + goto tail; + } else ++nurbs; } @@ -222,24 +240,27 @@ static int uhci_show_qh(struct uhci_hcd *uhci, space, "", nurbs); } + if (out - buf > len) + goto done; + if (qh->dummy_td) { out += sprintf(out, "%*s Dummy TD\n", space, ""); out += uhci_show_td(uhci, qh->dummy_td, out, len - (out - buf), 0); + if (out - buf > len) + goto tail; } +done: + if (out - buf > len) + out += sprintf(out, " ...\n"); +tail: return out - buf; } -static int uhci_show_sc(int port, unsigned short status, char *buf, int len) +static int uhci_show_sc(int port, unsigned short status, char *buf) { - char *out = buf; - - /* Try to make sure there's enough memory */ - if (len < 160) - return 0; - - out += sprintf(out, " stat%d = %04x %s%s%s%s%s%s%s%s%s%s\n", + return sprintf(buf, " stat%d = %04x %s%s%s%s%s%s%s%s%s%s\n", port, status, (status & USBPORTSC_SUSP) ? " Suspend" : "", @@ -252,19 +273,12 @@ static int uhci_show_sc(int port, unsigned short status, char *buf, int len) (status & USBPORTSC_PE) ? " Enabled" : "", (status & USBPORTSC_CSC) ? " ConnectChange" : "", (status & USBPORTSC_CCS) ? " Connected" : ""); - - return out - buf; } -static int uhci_show_root_hub_state(struct uhci_hcd *uhci, char *buf, int len) +static int uhci_show_root_hub_state(struct uhci_hcd *uhci, char *buf) { - char *out = buf; char *rh_state; - /* Try to make sure there's enough memory */ - if (len < 60) - return 0; - switch (uhci->rh_state) { case UHCI_RH_RESET: rh_state = "reset"; break; @@ -283,9 +297,8 @@ static int uhci_show_root_hub_state(struct uhci_hcd *uhci, char *buf, int len) default: rh_state = "?"; break; } - out += sprintf(out, "Root-hub state: %s FSBR: %d\n", + return sprintf(buf, "Root-hub state: %s FSBR: %d\n", rh_state, uhci->fsbr_is_on); - return out - buf; } static int uhci_show_status(struct uhci_hcd *uhci, char *buf, int len) @@ -296,9 +309,6 @@ static int uhci_show_status(struct uhci_hcd *uhci, char *buf, int len) unsigned char sof; unsigned short portsc1, portsc2; - /* Try to make sure there's enough memory */ - if (len < 80 * 9) - return 0; usbcmd = uhci_readw(uhci, 0); usbstat = uhci_readw(uhci, 2); @@ -319,6 +329,8 @@ static int uhci_show_status(struct uhci_hcd *uhci, char *buf, int len) (usbcmd & USBCMD_GRESET) ? "GRESET " : "", (usbcmd & USBCMD_HCRESET) ? "HCRESET " : "", (usbcmd & USBCMD_RS) ? "RS " : ""); + if (out - buf > len) + goto done; out += sprintf(out, " usbstat = %04x %s%s%s%s%s%s\n", usbstat, @@ -328,19 +340,33 @@ static int uhci_show_status(struct uhci_hcd *uhci, char *buf, int len) (usbstat & USBSTS_RD) ? "ResumeDetect " : "", (usbstat & USBSTS_ERROR) ? "USBError " : "", (usbstat & USBSTS_USBINT) ? "USBINT " : ""); + if (out - buf > len) + goto done; out += sprintf(out, " usbint = %04x\n", usbint); out += sprintf(out, " usbfrnum = (%d)%03x\n", (usbfrnum >> 10) & 1, 0xfff & (4*(unsigned int)usbfrnum)); out += sprintf(out, " flbaseadd = %08x\n", flbaseadd); out += sprintf(out, " sof = %02x\n", sof); - out += uhci_show_sc(1, portsc1, out, len - (out - buf)); - out += uhci_show_sc(2, portsc2, out, len - (out - buf)); - out += sprintf(out, "Most recent frame: %x (%d) " - "Last ISO frame: %x (%d)\n", + if (out - buf > len) + goto done; + + out += uhci_show_sc(1, portsc1, out); + if (out - buf > len) + goto done; + + out += uhci_show_sc(2, portsc2, out); + if (out - buf > len) + goto done; + + out += sprintf(out, + "Most recent frame: %x (%d) Last ISO frame: %x (%d)\n", uhci->frame_number, uhci->frame_number & 1023, uhci->last_iso_frame, uhci->last_iso_frame & 1023); +done: + if (out - buf > len) + out += sprintf(out, " ...\n"); return out - buf; } @@ -360,9 +386,13 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len) "int8", "int4", "int2", "async", "term" }; - out += uhci_show_root_hub_state(uhci, out, len - (out - buf)); + out += uhci_show_root_hub_state(uhci, out); + if (out - buf > len) + goto done; out += sprintf(out, "HC status\n"); out += uhci_show_status(uhci, out, len - (out - buf)); + if (out - buf > len) + goto tail; out += sprintf(out, "Periodic load table\n"); for (i = 0; i < MAX_PHASE; ++i) { @@ -375,7 +405,7 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len) uhci_to_hcd(uhci)->self.bandwidth_int_reqs, uhci_to_hcd(uhci)->self.bandwidth_isoc_reqs); if (debug <= 1) - return out - buf; + goto tail; out += sprintf(out, "Frame List\n"); nframes = 10; @@ -383,6 +413,8 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len) for (i = 0; i < UHCI_NUMFRAMES; ++i) { __hc32 qh_dma; + if (out - buf > len) + goto done; j = 0; td = uhci->frame_cpu[i]; link = uhci->frame[i]; @@ -401,15 +433,20 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len) td = list_entry(tmp, struct uhci_td, fl_list); tmp = tmp->next; if (link != LINK_TO_TD(uhci, td)) { - if (nframes > 0) - out += sprintf(out, " link does " - "not match list entry!\n"); - else + if (nframes > 0) { + out += sprintf(out, + " link does not match list entry!\n"); + if (out - buf > len) + goto done; + } else ++nerrs; } - if (nframes > 0) + if (nframes > 0) { out += uhci_show_td(uhci, td, out, len - (out - buf), 4); + if (out - buf > len) + goto tail; + } link = td->link; } while (tmp != head); @@ -423,9 +460,11 @@ check_link: i, hc32_to_cpu(uhci, link)); j = 1; } - out += sprintf(out, " link does not match " - "QH (%08x)!\n", + out += sprintf(out, + " link does not match QH (%08x)!\n", hc32_to_cpu(uhci, qh_dma)); + if (out - buf > len) + goto done; } else ++nerrs; } @@ -436,18 +475,27 @@ check_link: out += sprintf(out, "Skeleton QHs\n"); + if (out - buf > len) + goto done; + fsbr_link = 0; for (i = 0; i < UHCI_NUM_SKELQH; ++i) { int cnt = 0; qh = uhci->skelqh[i]; - out += sprintf(out, "- skel_%s_qh\n", qh_names[i]); \ + out += sprintf(out, "- skel_%s_qh\n", qh_names[i]); out += uhci_show_qh(uhci, qh, out, len - (out - buf), 4); + if (out - buf > len) + goto tail; /* Last QH is the Terminating QH, it's different */ if (i == SKEL_TERM) { - if (qh_element(qh) != LINK_TO_TD(uhci, uhci->term_td)) - out += sprintf(out, " skel_term_qh element is not set to term_td!\n"); + if (qh_element(qh) != LINK_TO_TD(uhci, uhci->term_td)) { + out += sprintf(out, + " skel_term_qh element is not set to term_td!\n"); + if (out - buf > len) + goto done; + } link = fsbr_link; if (!link) link = LINK_TO_QH(uhci, uhci->skel_term_qh); @@ -460,9 +508,12 @@ check_link: while (tmp != head) { qh = list_entry(tmp, struct uhci_qh, node); tmp = tmp->next; - if (++cnt <= 10) + if (++cnt <= 10) { out += uhci_show_qh(uhci, qh, out, len - (out - buf), 4); + if (out - buf > len) + goto tail; + } if (!fsbr_link && qh->skel >= SKEL_FSBR) fsbr_link = LINK_TO_QH(uhci, qh); } @@ -480,9 +531,17 @@ check_link: link = LINK_TO_QH(uhci, uhci->skel_term_qh); check_qh_link: if (qh->link != link) - out += sprintf(out, " last QH not linked to next skeleton!\n"); + out += sprintf(out, + " last QH not linked to next skeleton!\n"); + + if (out - buf > len) + goto done; } +done: + if (out - buf > len) + out += sprintf(out, " ...\n"); +tail: return out - buf; } @@ -514,7 +573,8 @@ static int uhci_debug_open(struct inode *inode, struct file *file) up->size = 0; spin_lock_irqsave(&uhci->lock, flags); if (uhci->is_initialized) - up->size = uhci_sprint_schedule(uhci, up->data, MAX_OUTPUT); + up->size = uhci_sprint_schedule(uhci, up->data, + MAX_OUTPUT - EXTRA_SPACE); spin_unlock_irqrestore(&uhci->lock, flags); file->private_data = up; @@ -529,7 +589,9 @@ static loff_t uhci_debug_lseek(struct file *file, loff_t off, int whence) up = file->private_data; - /* XXX: atomic 64bit seek access, but that needs to be fixed in the VFS */ + /* + * XXX: atomic 64bit seek access, but that needs to be fixed in the VFS + */ switch (whence) { case 0: new = off; diff --git a/drivers/usb/host/uhci-grlib.c b/drivers/usb/host/uhci-grlib.c index f7a62138e3e..511bfc46dd7 100644 --- a/drivers/usb/host/uhci-grlib.c +++ b/drivers/usb/host/uhci-grlib.c @@ -85,7 +85,7 @@ static const struct hc_driver uhci_grlib_hc_driver = { }; -static int __devinit uhci_hcd_grlib_probe(struct platform_device *op) +static int uhci_hcd_grlib_probe(struct platform_device *op) { struct device_node *dn = op->dev.of_node; struct usb_hcd *hcd; diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 4b9e9aba266..4a86b63745b 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -447,23 +447,25 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd) return IRQ_NONE; uhci_writew(uhci, status, USBSTS); /* Clear it */ + spin_lock(&uhci->lock); + if (unlikely(!uhci->is_initialized)) /* not yet configured */ + goto done; + if (status & ~(USBSTS_USBINT | USBSTS_ERROR | USBSTS_RD)) { if (status & USBSTS_HSE) - dev_err(uhci_dev(uhci), "host system error, " - "PCI problems?\n"); + dev_err(uhci_dev(uhci), + "host system error, PCI problems?\n"); if (status & USBSTS_HCPE) - dev_err(uhci_dev(uhci), "host controller process " - "error, something bad happened!\n"); + dev_err(uhci_dev(uhci), + "host controller process error, something bad happened!\n"); if (status & USBSTS_HCH) { - spin_lock(&uhci->lock); if (uhci->rh_state >= UHCI_RH_RUNNING) { dev_err(uhci_dev(uhci), - "host controller halted, " - "very bad!\n"); + "host controller halted, very bad!\n"); if (debug > 1 && errbuf) { /* Print the schedule for debugging */ - uhci_sprint_schedule(uhci, - errbuf, ERRBUF_LEN); + uhci_sprint_schedule(uhci, errbuf, + ERRBUF_LEN - EXTRA_SPACE); lprintk(errbuf); } uhci_hc_died(uhci); @@ -473,15 +475,15 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd) * pending unlinks */ mod_timer(&hcd->rh_timer, jiffies); } - spin_unlock(&uhci->lock); } } - if (status & USBSTS_RD) + if (status & USBSTS_RD) { + spin_unlock(&uhci->lock); usb_hcd_poll_rh_status(hcd); - else { - spin_lock(&uhci->lock); + } else { uhci_scan_schedule(uhci); + done: spin_unlock(&uhci->lock); } @@ -589,8 +591,8 @@ static int uhci_start(struct usb_hcd *hcd) UHCI_NUMFRAMES * sizeof(*uhci->frame), &uhci->frame_dma_handle, 0); if (!uhci->frame) { - dev_err(uhci_dev(uhci), "unable to allocate " - "consistent memory for frame list\n"); + dev_err(uhci_dev(uhci), + "unable to allocate consistent memory for frame list\n"); goto err_alloc_frame; } memset(uhci->frame, 0, UHCI_NUMFRAMES * sizeof(*uhci->frame)); @@ -598,8 +600,8 @@ static int uhci_start(struct usb_hcd *hcd) uhci->frame_cpu = kcalloc(UHCI_NUMFRAMES, sizeof(*uhci->frame_cpu), GFP_KERNEL); if (!uhci->frame_cpu) { - dev_err(uhci_dev(uhci), "unable to allocate " - "memory for frame pointers\n"); + dev_err(uhci_dev(uhci), + "unable to allocate memory for frame pointers\n"); goto err_alloc_frame_cpu; } @@ -662,9 +664,9 @@ static int uhci_start(struct usb_hcd *hcd) */ mb(); + spin_lock_irq(&uhci->lock); configure_hc(uhci); uhci->is_initialized = 1; - spin_lock_irq(&uhci->lock); start_rh(uhci); spin_unlock_irq(&uhci->lock); return 0; @@ -734,8 +736,8 @@ static int uhci_rh_suspend(struct usb_hcd *hcd) */ else if (hcd->self.root_hub->do_remote_wakeup && uhci->resuming_ports) { - dev_dbg(uhci_dev(uhci), "suspend failed because a port " - "is resuming\n"); + dev_dbg(uhci_dev(uhci), + "suspend failed because a port is resuming\n"); rc = -EBUSY; } else suspend_rh(uhci, UHCI_RH_SUSPENDED); @@ -826,8 +828,8 @@ static int uhci_count_ports(struct usb_hcd *hcd) /* Anything greater than 7 is weird so we'll ignore it. */ if (port > UHCI_RH_MAXCHILD) { - dev_info(uhci_dev(uhci), "port count misdetected? " - "forcing to 2 ports\n"); + dev_info(uhci_dev(uhci), + "port count misdetected? forcing to 2 ports\n"); port = 2; } diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h index 7af2b705204..6f986d82472 100644 --- a/drivers/usb/host/uhci-hcd.h +++ b/drivers/usb/host/uhci-hcd.h @@ -212,10 +212,6 @@ struct uhci_qh { #define TD_CTRL_BITSTUFF (1 << 17) /* Bit Stuff Error */ #define TD_CTRL_ACTLEN_MASK 0x7FF /* actual length, encoded as n - 1 */ -#define TD_CTRL_ANY_ERROR (TD_CTRL_STALLED | TD_CTRL_DBUFERR | \ - TD_CTRL_BABBLE | TD_CTRL_CRCTIME | \ - TD_CTRL_BITSTUFF) - #define uhci_maxerr(err) ((err) << TD_CTRL_C_ERR_SHIFT) #define uhci_status_bits(ctrl_sts) ((ctrl_sts) & 0xF60000) #define uhci_actual_length(ctrl_sts) (((ctrl_sts) + 1) & \ diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index 768d54295a2..f87bee6d278 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -21,8 +21,8 @@ static const __u8 root_hub_hub_des[] = 0x00, /* (per-port OC, no power switching) */ 0x01, /* __u8 bPwrOn2pwrGood; 2ms */ 0x00, /* __u8 bHubContrCurrent; 0 mA */ - 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */ - 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */ + 0x00, /* __u8 DeviceRemovable; *** 7 Ports max */ + 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max */ }; #define UHCI_RH_MAXCHILD 7 @@ -116,6 +116,7 @@ static void uhci_finish_suspend(struct uhci_hcd *uhci, int port, } } clear_bit(port, &uhci->resuming_ports); + usb_hcd_end_port_resume(&uhci_to_hcd(uhci)->self, port); } /* Wait for the UHCI controller in HP's iLO2 server management chip. @@ -167,6 +168,8 @@ static void uhci_check_ports(struct uhci_hcd *uhci) set_bit(port, &uhci->resuming_ports); uhci->ports_timeout = jiffies + msecs_to_jiffies(25); + usb_hcd_start_port_resume( + &uhci_to_hcd(uhci)->self, port); /* Make sure we see the port again * after the resuming period is over. */ diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c index 68ebf20e151..8c4dace4b14 100644 --- a/drivers/usb/host/uhci-platform.c +++ b/drivers/usb/host/uhci-platform.c @@ -62,7 +62,7 @@ static const struct hc_driver uhci_platform_hc_driver = { static u64 platform_uhci_dma_mask = DMA_BIT_MASK(32); -static int __devinit uhci_hcd_platform_probe(struct platform_device *pdev) +static int uhci_hcd_platform_probe(struct platform_device *pdev) { struct usb_hcd *hcd; struct uhci_hcd *uhci; diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index d2c6f5ac462..f0976d8190b 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -1200,7 +1200,7 @@ static int uhci_result_common(struct uhci_hcd *uhci, struct urb *urb) if (debug > 1 && errbuf) { /* Print the chain for debugging */ uhci_show_qh(uhci, urbp->qh, errbuf, - ERRBUF_LEN, 0); + ERRBUF_LEN - EXTRA_SPACE, 0); lprintk(errbuf); } } @@ -1256,7 +1256,8 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb, struct uhci_qh *qh) { struct uhci_td *td = NULL; /* Since urb->number_of_packets > 0 */ - int i, frame; + int i; + unsigned frame, next; unsigned long destination, status; struct urb_priv *urbp = (struct urb_priv *) urb->hcpriv; @@ -1265,37 +1266,29 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb, urb->number_of_packets >= UHCI_NUMFRAMES) return -EFBIG; + uhci_get_current_frame_number(uhci); + /* Check the period and figure out the starting frame number */ if (!qh->bandwidth_reserved) { qh->period = urb->interval; - if (urb->transfer_flags & URB_ISO_ASAP) { - qh->phase = -1; /* Find the best phase */ - i = uhci_check_bandwidth(uhci, qh); - if (i) - return i; - - /* Allow a little time to allocate the TDs */ - uhci_get_current_frame_number(uhci); - frame = uhci->frame_number + 10; - - /* Move forward to the first frame having the - * correct phase */ - urb->start_frame = frame + ((qh->phase - frame) & - (qh->period - 1)); - } else { - i = urb->start_frame - uhci->last_iso_frame; - if (i <= 0 || i >= UHCI_NUMFRAMES) - return -EINVAL; - qh->phase = urb->start_frame & (qh->period - 1); - i = uhci_check_bandwidth(uhci, qh); - if (i) - return i; - } + qh->phase = -1; /* Find the best phase */ + i = uhci_check_bandwidth(uhci, qh); + if (i) + return i; + + /* Allow a little time to allocate the TDs */ + next = uhci->frame_number + 10; + frame = qh->phase; + + /* Round up to the first available slot */ + frame += (next - frame + qh->period - 1) & -qh->period; } else if (qh->period != urb->interval) { return -EINVAL; /* Can't change the period */ } else { + next = uhci->frame_number + 2; + /* Find the next unused frame */ if (list_empty(&qh->queue)) { frame = qh->iso_frame; @@ -1308,25 +1301,31 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb, lurb->number_of_packets * lurb->interval; } - if (urb->transfer_flags & URB_ISO_ASAP) { - /* Skip some frames if necessary to insure - * the start frame is in the future. + + /* Fell behind? */ + if (uhci_frame_before_eq(frame, next)) { + + /* USB_ISO_ASAP: Round up to the first available slot */ + if (urb->transfer_flags & URB_ISO_ASAP) + frame += (next - frame + qh->period - 1) & + -qh->period; + + /* + * Not ASAP: Use the next slot in the stream. If + * the entire URB falls before the threshold, fail. */ - uhci_get_current_frame_number(uhci); - if (uhci_frame_before_eq(frame, uhci->frame_number)) { - frame = uhci->frame_number + 1; - frame += ((qh->phase - frame) & - (qh->period - 1)); - } - } /* Otherwise pick up where the last URB leaves off */ - urb->start_frame = frame; + else if (!uhci_frame_before_eq(next, + frame + (urb->number_of_packets - 1) * + qh->period)) + return -EXDEV; + } } /* Make sure we won't have to go too far into the future */ if (uhci_frame_before_eq(uhci->last_iso_frame + UHCI_NUMFRAMES, - urb->start_frame + urb->number_of_packets * - urb->interval)) + frame + urb->number_of_packets * urb->interval)) return -EFBIG; + urb->start_frame = frame; status = TD_CTRL_ACTIVE | TD_CTRL_IOS; destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe); diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index a686cf4905b..68914429482 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -761,12 +761,39 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, break; case USB_PORT_FEAT_LINK_STATE: temp = xhci_readl(xhci, port_array[wIndex]); + + /* Disable port */ + if (link_state == USB_SS_PORT_LS_SS_DISABLED) { + xhci_dbg(xhci, "Disable port %d\n", wIndex); + temp = xhci_port_state_to_neutral(temp); + /* + * Clear all change bits, so that we get a new + * connection event. + */ + temp |= PORT_CSC | PORT_PEC | PORT_WRC | + PORT_OCC | PORT_RC | PORT_PLC | + PORT_CEC; + xhci_writel(xhci, temp | PORT_PE, + port_array[wIndex]); + temp = xhci_readl(xhci, port_array[wIndex]); + break; + } + + /* Put link in RxDetect (enable port) */ + if (link_state == USB_SS_PORT_LS_RX_DETECT) { + xhci_dbg(xhci, "Enable port %d\n", wIndex); + xhci_set_link_state(xhci, port_array, wIndex, + link_state); + temp = xhci_readl(xhci, port_array[wIndex]); + break; + } + /* Software should not attempt to set - * port link state above '5' (Rx.Detect) and the port + * port link state above '3' (U3) and the port * must be enabled. */ if ((temp & PORT_PE) == 0 || - (link_state > USB_SS_PORT_LS_RX_DETECT)) { + (link_state > USB_SS_PORT_LS_U3)) { xhci_warn(xhci, "Cannot set link state.\n"); goto error; } @@ -957,6 +984,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) int max_ports; __le32 __iomem **port_array; struct xhci_bus_state *bus_state; + bool reset_change = false; max_ports = xhci_get_ports(hcd, &port_array); bus_state = &xhci->bus_state[hcd_index(hcd)]; @@ -988,6 +1016,12 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) buf[(i + 1) / 8] |= 1 << (i + 1) % 8; status = 1; } + if ((temp & PORT_RC)) + reset_change = true; + } + if (!status && !reset_change) { + xhci_dbg(xhci, "%s: stopping port polling.\n", __func__); + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); } spin_unlock_irqrestore(&xhci->lock, flags); return status ? retval : 0; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 487bc083dea..35616ffbe3a 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -205,7 +205,12 @@ static int xhci_alloc_segments_for_ring(struct xhci_hcd *xhci, next = xhci_segment_alloc(xhci, cycle_state, flags); if (!next) { - xhci_free_segments_for_ring(xhci, *first); + prev = *first; + while (prev) { + next = prev->next; + xhci_segment_free(xhci, prev); + prev = next; + } return -ENOMEM; } xhci_link_segments(xhci, prev, next, type); @@ -258,7 +263,7 @@ static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci, return ring; fail: - xhci_ring_free(xhci, ring); + kfree(ring); return NULL; } @@ -1245,6 +1250,8 @@ static unsigned int xhci_microframes_to_exponent(struct usb_device *udev, static unsigned int xhci_parse_microframe_interval(struct usb_device *udev, struct usb_host_endpoint *ep) { + if (ep->desc.bInterval == 0) + return 0; return xhci_microframes_to_exponent(udev, ep, ep->desc.bInterval, 0, 15); } diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 8345d7c2306..af259e0ec17 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -29,6 +29,7 @@ /* Device for a quirk */ #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 +#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400 #define PCI_VENDOR_ID_ETRON 0x1b6f #define PCI_DEVICE_ID_ASROCK_P67 0x7023 @@ -58,8 +59,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) /* Look for vendor-specific quirks */ if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && - pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) { - if (pdev->revision == 0x0) { + (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK || + pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) { + if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && + pdev->revision == 0x0) { xhci->quirks |= XHCI_RESET_EP_QUIRK; xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure" " endpoint cmd after reset endpoint\n"); @@ -218,15 +221,8 @@ static void xhci_pci_remove(struct pci_dev *dev) static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); - int retval = 0; - if (hcd->state != HC_STATE_SUSPENDED || - xhci->shared_hcd->state != HC_STATE_SUSPENDED) - return -EINVAL; - - retval = xhci_suspend(xhci); - - return retval; + return xhci_suspend(xhci); } static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 4e1a8946b8d..88287546530 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -318,7 +318,7 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) * seconds), then it should assume that the there are * larger problems with the xHC and assert HCRST. */ - ret = handshake(xhci, &xhci->op_regs->cmd_ring, + ret = xhci_handshake(xhci, &xhci->op_regs->cmd_ring, CMD_RING_RUNNING, 0, 5 * 1000 * 1000); if (ret < 0) { xhci_err(xhci, "Stopped the command ring failed, " @@ -1698,7 +1698,7 @@ static void handle_port_status(struct xhci_hcd *xhci, faked_port_index + 1); if (slot_id && xhci->devs[slot_id]) xhci_ring_device(xhci, slot_id); - if (bus_state->port_remote_wakeup && (1 << faked_port_index)) { + if (bus_state->port_remote_wakeup & (1 << faked_port_index)) { bus_state->port_remote_wakeup &= ~(1 << faked_port_index); xhci_test_and_clear_bit(xhci, port_array, @@ -1725,6 +1725,15 @@ cleanup: if (bogus_port_status) return; + /* + * xHCI port-status-change events occur when the "or" of all the + * status-change bits in the portsc register changes from 0 to 1. + * New status changes won't cause an event if any other change + * bits are still set. When an event occurs, switch over to + * polling to avoid losing status changes. + */ + xhci_dbg(xhci, "%s: starting port polling.\n", __func__); + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); spin_unlock(&xhci->lock); /* Pass this up to the core */ usb_hcd_poll_rh_status(hcd); @@ -2580,6 +2589,8 @@ cleanup: (trb_comp_code != COMP_STALL && trb_comp_code != COMP_BABBLE)) xhci_urb_free_priv(xhci, urb_priv); + else + kfree(urb_priv); usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb); if ((urb->actual_length != urb->transfer_buffer_length && @@ -2697,13 +2708,11 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); u32 status; - union xhci_trb *trb; u64 temp_64; union xhci_trb *event_ring_deq; dma_addr_t deq; spin_lock(&xhci->lock); - trb = xhci->event_ring->dequeue; /* Check if the xHC generated the interrupt, or the irq is shared */ status = xhci_readl(xhci, &xhci->op_regs->status); if (status == 0xffffffff) @@ -3071,11 +3080,11 @@ static u32 xhci_td_remainder(unsigned int remainder) } /* - * For xHCI 1.0 host controllers, TD size is the number of packets remaining in - * the TD (*not* including this TRB). + * For xHCI 1.0 host controllers, TD size is the number of max packet sized + * packets remaining in the TD (*not* including this TRB). * * Total TD packet count = total_packet_count = - * roundup(TD size in bytes / wMaxPacketSize) + * DIV_ROUND_UP(TD size in bytes / wMaxPacketSize) * * Packets transferred up to and including this TRB = packets_transferred = * rounddown(total bytes transferred including this TRB / wMaxPacketSize) @@ -3083,24 +3092,27 @@ static u32 xhci_td_remainder(unsigned int remainder) * TD size = total_packet_count - packets_transferred * * It must fit in bits 21:17, so it can't be bigger than 31. + * The last TRB in a TD must have the TD size set to zero. */ - static u32 xhci_v1_0_td_remainder(int running_total, int trb_buff_len, - unsigned int total_packet_count, struct urb *urb) + unsigned int total_packet_count, struct urb *urb, + unsigned int num_trbs_left) { int packets_transferred; /* One TRB with a zero-length data packet. */ - if (running_total == 0 && trb_buff_len == 0) + if (num_trbs_left == 0 || (running_total == 0 && trb_buff_len == 0)) return 0; /* All the TRB queueing functions don't count the current TRB in * running_total. */ packets_transferred = (running_total + trb_buff_len) / - usb_endpoint_maxp(&urb->ep->desc); + GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc)); - return xhci_td_remainder(total_packet_count - packets_transferred); + if ((total_packet_count - packets_transferred) > 31) + return 31 << 17; + return (total_packet_count - packets_transferred) << 17; } static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, @@ -3127,7 +3139,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, num_trbs = count_sg_trbs_needed(xhci, urb); num_sgs = urb->num_mapped_sgs; - total_packet_count = roundup(urb->transfer_buffer_length, + total_packet_count = DIV_ROUND_UP(urb->transfer_buffer_length, usb_endpoint_maxp(&urb->ep->desc)); trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id], @@ -3210,7 +3222,8 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, running_total); } else { remainder = xhci_v1_0_td_remainder(running_total, - trb_buff_len, total_packet_count, urb); + trb_buff_len, total_packet_count, urb, + num_trbs - 1); } length_field = TRB_LEN(trb_buff_len) | remainder | @@ -3318,7 +3331,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, start_cycle = ep_ring->cycle_state; running_total = 0; - total_packet_count = roundup(urb->transfer_buffer_length, + total_packet_count = DIV_ROUND_UP(urb->transfer_buffer_length, usb_endpoint_maxp(&urb->ep->desc)); /* How much data is in the first TRB? */ addr = (u64) urb->transfer_dma; @@ -3364,7 +3377,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, running_total); } else { remainder = xhci_v1_0_td_remainder(running_total, - trb_buff_len, total_packet_count, urb); + trb_buff_len, total_packet_count, urb, + num_trbs - 1); } length_field = TRB_LEN(trb_buff_len) | remainder | @@ -3627,8 +3641,9 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, addr = start_addr + urb->iso_frame_desc[i].offset; td_len = urb->iso_frame_desc[i].length; td_remain_len = td_len; - total_packet_count = roundup(td_len, - usb_endpoint_maxp(&urb->ep->desc)); + total_packet_count = DIV_ROUND_UP(td_len, + GET_MAX_PACKET( + usb_endpoint_maxp(&urb->ep->desc))); /* A zero-length transfer still involves at least one packet. */ if (total_packet_count == 0) total_packet_count++; @@ -3650,9 +3665,11 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, td = urb_priv->td[i]; for (j = 0; j < trbs_per_td; j++) { u32 remainder = 0; - field = TRB_TBC(burst_count) | TRB_TLBPC(residue); + field = 0; if (first_trb) { + field = TRB_TBC(burst_count) | + TRB_TLBPC(residue); /* Queue the isoc TRB */ field |= TRB_TYPE(TRB_ISOC); /* Assume URB_ISO_ASAP is set */ @@ -3706,7 +3723,8 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, } else { remainder = xhci_v1_0_td_remainder( running_total, trb_buff_len, - total_packet_count, urb); + total_packet_count, urb, + (trbs_per_td - j - 1)); } length_field = TRB_LEN(trb_buff_len) | remainder | diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index c9e419f29b7..f1f01a834ba 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -40,7 +40,7 @@ MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB"); /* TODO: copied from ehci-hcd.c - can this be refactored? */ /* - * handshake - spin reading hc until handshake completes or fails + * xhci_handshake - spin reading hc until handshake completes or fails * @ptr: address of hc register to be read * @mask: bits to look at in result of read * @done: value of those bits when handshake succeeds @@ -52,7 +52,7 @@ MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB"); * handshake done). There are two failure modes: "usec" have passed (major * hardware flakeout), or the register reads as all-ones (hardware removed). */ -int handshake(struct xhci_hcd *xhci, void __iomem *ptr, +int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr, u32 mask, u32 done, int usec) { u32 result; @@ -103,7 +103,7 @@ int xhci_halt(struct xhci_hcd *xhci) xhci_dbg(xhci, "// Halt the HC\n"); xhci_quiesce(xhci); - ret = handshake(xhci, &xhci->op_regs->status, + ret = xhci_handshake(xhci, &xhci->op_regs->status, STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC); if (!ret) { xhci->xhc_state |= XHCI_STATE_HALTED; @@ -132,7 +132,7 @@ static int xhci_start(struct xhci_hcd *xhci) * Wait for the HCHalted Status bit to be 0 to indicate the host is * running. */ - ret = handshake(xhci, &xhci->op_regs->status, + ret = xhci_handshake(xhci, &xhci->op_regs->status, STS_HALT, 0, XHCI_MAX_HALT_USEC); if (ret == -ETIMEDOUT) xhci_err(xhci, "Host took too long to start, " @@ -167,7 +167,7 @@ int xhci_reset(struct xhci_hcd *xhci) command |= CMD_RESET; xhci_writel(xhci, command, &xhci->op_regs->command); - ret = handshake(xhci, &xhci->op_regs->command, + ret = xhci_handshake(xhci, &xhci->op_regs->command, CMD_RESET, 0, 10 * 1000 * 1000); if (ret) return ret; @@ -177,7 +177,7 @@ int xhci_reset(struct xhci_hcd *xhci) * xHCI cannot write to any doorbells or operational registers other * than status until the "Controller Not Ready" flag is cleared. */ - ret = handshake(xhci, &xhci->op_regs->status, + ret = xhci_handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 10 * 1000 * 1000); for (i = 0; i < 2; ++i) { @@ -480,7 +480,7 @@ static bool compliance_mode_recovery_timer_quirk_check(void) if (strstr(dmi_product_name, "Z420") || strstr(dmi_product_name, "Z620") || strstr(dmi_product_name, "Z820") || - strstr(dmi_product_name, "Z1")) + strstr(dmi_product_name, "Z1 Workstation")) return true; return false; @@ -880,6 +880,15 @@ int xhci_suspend(struct xhci_hcd *xhci) struct usb_hcd *hcd = xhci_to_hcd(xhci); u32 command; + if (hcd->state != HC_STATE_SUSPENDED || + xhci->shared_hcd->state != HC_STATE_SUSPENDED) + return -EINVAL; + + /* Don't poll the roothubs on bus suspend. */ + xhci_dbg(xhci, "%s: stopping port polling.\n", __func__); + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); + spin_lock_irq(&xhci->lock); clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags); @@ -890,7 +899,7 @@ int xhci_suspend(struct xhci_hcd *xhci) command = xhci_readl(xhci, &xhci->op_regs->command); command &= ~CMD_RUN; xhci_writel(xhci, command, &xhci->op_regs->command); - if (handshake(xhci, &xhci->op_regs->status, + if (xhci_handshake(xhci, &xhci->op_regs->status, STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC)) { xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n"); spin_unlock_irq(&xhci->lock); @@ -905,7 +914,8 @@ int xhci_suspend(struct xhci_hcd *xhci) command = xhci_readl(xhci, &xhci->op_regs->command); command |= CMD_CSS; xhci_writel(xhci, command, &xhci->op_regs->command); - if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10 * 1000)) { + if (xhci_handshake(xhci, &xhci->op_regs->status, + STS_SAVE, 0, 10 * 1000)) { xhci_warn(xhci, "WARN: xHC save state timeout\n"); spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; @@ -967,7 +977,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) command = xhci_readl(xhci, &xhci->op_regs->command); command |= CMD_CRS; xhci_writel(xhci, command, &xhci->op_regs->command); - if (handshake(xhci, &xhci->op_regs->status, + if (xhci_handshake(xhci, &xhci->op_regs->status, STS_RESTORE, 0, 10 * 1000)) { xhci_warn(xhci, "WARN: xHC restore state timeout\n"); spin_unlock_irq(&xhci->lock); @@ -1035,7 +1045,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) command = xhci_readl(xhci, &xhci->op_regs->command); command |= CMD_RUN; xhci_writel(xhci, command, &xhci->op_regs->command); - handshake(xhci, &xhci->op_regs->status, STS_HALT, + xhci_handshake(xhci, &xhci->op_regs->status, STS_HALT, 0, 250 * 1000); /* step 5: walk topology and initialize portsc, @@ -1064,6 +1074,11 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) if (xhci->quirks & XHCI_COMP_MODE_QUIRK) compliance_mode_recovery_timer_init(xhci); + /* Re-enable port polling. */ + xhci_dbg(xhci, "%s: starting port polling.\n", __func__); + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + usb_hcd_poll_rh_status(hcd); + return retval; } #endif /* CONFIG_PM */ @@ -2254,7 +2269,7 @@ static bool xhci_is_async_ep(unsigned int ep_type) static bool xhci_is_sync_in_ep(unsigned int ep_type) { - return (ep_type == ISOC_IN_EP || ep_type != INT_IN_EP); + return (ep_type == ISOC_IN_EP || ep_type == INT_IN_EP); } static unsigned int xhci_get_ss_bw_consumed(struct xhci_bw_info *ep_bw) @@ -3874,7 +3889,8 @@ static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd, spin_lock_irqsave(&xhci->lock, flags); /* Check L1 Status */ - ret = handshake(xhci, pm_addr, PORT_L1S_MASK, PORT_L1S_SUCCESS, 125); + ret = xhci_handshake(xhci, pm_addr, + PORT_L1S_MASK, PORT_L1S_SUCCESS, 125); if (ret != -ETIMEDOUT) { /* enter L1 successfully */ temp = xhci_readl(xhci, addr); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 53df4e70ca0..f791bd0aee6 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1720,7 +1720,7 @@ static inline void xhci_unregister_plat(void) /* xHCI host controller glue */ typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *); -int handshake(struct xhci_hcd *xhci, void __iomem *ptr, +int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr, u32 mask, u32 done, int usec); void xhci_quiesce(struct xhci_hcd *xhci); int xhci_halt(struct xhci_hcd *xhci); diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index a8f05239350..3b1a3f4ec5e 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -246,6 +246,13 @@ config USB_YUREX config USB_EZUSB_FX2 tristate "Functions for loading firmware on EZUSB chips" + depends on USB help Say Y here if you need EZUSB device support. (Cypress FX/FX2/FX2LP microcontrollers) + +config USB_HSIC_USB3503 + tristate "USB3503 HSIC to USB20 Driver" + depends on I2C + help + This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver. diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 3e99a643294..3e1bd70b06e 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -26,5 +26,6 @@ obj-$(CONFIG_USB_TRANCEVIBRATOR) += trancevibrator.o obj-$(CONFIG_USB_USS720) += uss720.o obj-$(CONFIG_USB_SEVSEG) += usbsevseg.o obj-$(CONFIG_USB_YUREX) += yurex.o +obj-$(CONFIG_USB_HSIC_USB3503) += usb3503.o obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/ diff --git a/drivers/usb/misc/ezusb.c b/drivers/usb/misc/ezusb.c index 6589268a651..e712afed947 100644 --- a/drivers/usb/misc/ezusb.c +++ b/drivers/usb/misc/ezusb.c @@ -15,6 +15,7 @@ #include <linux/usb.h> #include <linux/firmware.h> #include <linux/ihex.h> +#include <linux/usb/ezusb.h> struct ezusb_fx_type { /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */ @@ -22,21 +23,16 @@ struct ezusb_fx_type { unsigned short max_internal_adress; }; -struct ezusb_fx_type ezusb_fx1 = { +static struct ezusb_fx_type ezusb_fx1 = { .cpucs_reg = 0x7F92, .max_internal_adress = 0x1B3F, }; -struct ezusb_fx_type ezusb_fx2 = { - .cpucs_reg = 0xE600, - .max_internal_adress = 0x3FFF, -}; - /* Commands for writing to memory */ #define WRITE_INT_RAM 0xA0 #define WRITE_EXT_RAM 0xA3 -int ezusb_writememory(struct usb_device *dev, int address, +static int ezusb_writememory(struct usb_device *dev, int address, unsigned char *data, int length, __u8 request) { int result; @@ -58,10 +54,9 @@ int ezusb_writememory(struct usb_device *dev, int address, kfree(transfer_buffer); return result; } -EXPORT_SYMBOL_GPL(ezusb_writememory); -int ezusb_set_reset(struct usb_device *dev, unsigned short cpucs_reg, - unsigned char reset_bit) +static int ezusb_set_reset(struct usb_device *dev, unsigned short cpucs_reg, + unsigned char reset_bit) { int response = ezusb_writememory(dev, cpucs_reg, &reset_bit, 1, WRITE_INT_RAM); if (response < 0) @@ -76,12 +71,6 @@ int ezusb_fx1_set_reset(struct usb_device *dev, unsigned char reset_bit) } EXPORT_SYMBOL_GPL(ezusb_fx1_set_reset); -int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit) -{ - return ezusb_set_reset(dev, ezusb_fx2.cpucs_reg, reset_bit); -} -EXPORT_SYMBOL_GPL(ezusb_fx2_set_reset); - static int ezusb_ihex_firmware_download(struct usb_device *dev, struct ezusb_fx_type fx, const char *firmware_path) @@ -151,11 +140,28 @@ int ezusb_fx1_ihex_firmware_download(struct usb_device *dev, } EXPORT_SYMBOL_GPL(ezusb_fx1_ihex_firmware_download); +#if 0 +/* + * Once someone one needs these fx2 functions, uncomment them + * and add them to ezusb.h and all should be good. + */ +static struct ezusb_fx_type ezusb_fx2 = { + .cpucs_reg = 0xE600, + .max_internal_adress = 0x3FFF, +}; + +int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit) +{ + return ezusb_set_reset(dev, ezusb_fx2.cpucs_reg, reset_bit); +} +EXPORT_SYMBOL_GPL(ezusb_fx2_set_reset); + int ezusb_fx2_ihex_firmware_download(struct usb_device *dev, const char *firmware_path) { return ezusb_ihex_firmware_download(dev, ezusb_fx2, firmware_path); } EXPORT_SYMBOL_GPL(ezusb_fx2_ihex_firmware_download); +#endif MODULE_LICENSE("GPL"); diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c new file mode 100644 index 00000000000..f713f6aeb6e --- /dev/null +++ b/drivers/usb/misc/usb3503.c @@ -0,0 +1,325 @@ +/* + * Driver for SMSC USB3503 USB 2.0 hub controller driver + * + * Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/platform_data/usb3503.h> + +#define USB3503_VIDL 0x00 +#define USB3503_VIDM 0x01 +#define USB3503_PIDL 0x02 +#define USB3503_PIDM 0x03 +#define USB3503_DIDL 0x04 +#define USB3503_DIDM 0x05 + +#define USB3503_CFG1 0x06 +#define USB3503_SELF_BUS_PWR (1 << 7) + +#define USB3503_CFG2 0x07 +#define USB3503_CFG3 0x08 +#define USB3503_NRD 0x09 + +#define USB3503_PDS 0x0a +#define USB3503_PORT1 (1 << 1) +#define USB3503_PORT2 (1 << 2) +#define USB3503_PORT3 (1 << 3) + +#define USB3503_SP_ILOCK 0xe7 +#define USB3503_SPILOCK_CONNECT (1 << 1) +#define USB3503_SPILOCK_CONFIG (1 << 0) + +#define USB3503_CFGP 0xee +#define USB3503_CLKSUSP (1 << 7) + +struct usb3503 { + enum usb3503_mode mode; + struct i2c_client *client; + int gpio_intn; + int gpio_reset; + int gpio_connect; +}; + +static int usb3503_write_register(struct i2c_client *client, + char reg, char data) +{ + return i2c_smbus_write_byte_data(client, reg, data); +} + +static int usb3503_read_register(struct i2c_client *client, char reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int usb3503_set_bits(struct i2c_client *client, char reg, char req) +{ + int err; + + err = usb3503_read_register(client, reg); + if (err < 0) + return err; + + err = usb3503_write_register(client, reg, err | req); + if (err < 0) + return err; + + return 0; +} + +static int usb3503_clear_bits(struct i2c_client *client, char reg, char req) +{ + int err; + + err = usb3503_read_register(client, reg); + if (err < 0) + return err; + + err = usb3503_write_register(client, reg, err & ~req); + if (err < 0) + return err; + + return 0; +} + +static int usb3503_reset(int gpio_reset, int state) +{ + if (gpio_is_valid(gpio_reset)) + gpio_set_value(gpio_reset, state); + + /* Wait RefClk when RESET_N is released, otherwise Hub will + * not transition to Hub Communication Stage. + */ + if (state) + msleep(100); + + return 0; +} + +static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode) +{ + struct i2c_client *i2c = hub->client; + int err = 0; + + switch (mode) { + case USB3503_MODE_HUB: + usb3503_reset(hub->gpio_reset, 1); + + /* SP_ILOCK: set connect_n, config_n for config */ + err = usb3503_write_register(i2c, USB3503_SP_ILOCK, + (USB3503_SPILOCK_CONNECT + | USB3503_SPILOCK_CONFIG)); + if (err < 0) { + dev_err(&i2c->dev, "SP_ILOCK failed (%d)\n", err); + goto err_hubmode; + } + + /* PDS : Port2,3 Disable For Self Powered Operation */ + err = usb3503_set_bits(i2c, USB3503_PDS, + (USB3503_PORT2 | USB3503_PORT3)); + if (err < 0) { + dev_err(&i2c->dev, "PDS failed (%d)\n", err); + goto err_hubmode; + } + + /* CFG1 : SELF_BUS_PWR -> Self-Powerd operation */ + err = usb3503_set_bits(i2c, USB3503_CFG1, USB3503_SELF_BUS_PWR); + if (err < 0) { + dev_err(&i2c->dev, "CFG1 failed (%d)\n", err); + goto err_hubmode; + } + + /* SP_LOCK: clear connect_n, config_n for hub connect */ + err = usb3503_clear_bits(i2c, USB3503_SP_ILOCK, + (USB3503_SPILOCK_CONNECT + | USB3503_SPILOCK_CONFIG)); + if (err < 0) { + dev_err(&i2c->dev, "SP_ILOCK failed (%d)\n", err); + goto err_hubmode; + } + + hub->mode = mode; + dev_info(&i2c->dev, "switched to HUB mode\n"); + break; + + case USB3503_MODE_STANDBY: + usb3503_reset(hub->gpio_reset, 0); + + hub->mode = mode; + dev_info(&i2c->dev, "switched to STANDBY mode\n"); + break; + + default: + dev_err(&i2c->dev, "unknown mode is request\n"); + err = -EINVAL; + break; + } + +err_hubmode: + return err; +} + +static int usb3503_probe(struct i2c_client *i2c, const struct i2c_device_id *id) +{ + struct usb3503_platform_data *pdata = i2c->dev.platform_data; + struct device_node *np = i2c->dev.of_node; + struct usb3503 *hub; + int err = -ENOMEM; + u32 mode = USB3503_MODE_UNKNOWN; + + hub = kzalloc(sizeof(struct usb3503), GFP_KERNEL); + if (!hub) { + dev_err(&i2c->dev, "private data alloc fail\n"); + return err; + } + + i2c_set_clientdata(i2c, hub); + hub->client = i2c; + + if (pdata) { + hub->gpio_intn = pdata->gpio_intn; + hub->gpio_connect = pdata->gpio_connect; + hub->gpio_reset = pdata->gpio_reset; + hub->mode = pdata->initial_mode; + } else if (np) { + hub->gpio_intn = of_get_named_gpio(np, "connect-gpios", 0); + if (hub->gpio_intn == -EPROBE_DEFER) + return -EPROBE_DEFER; + hub->gpio_connect = of_get_named_gpio(np, "intn-gpios", 0); + if (hub->gpio_connect == -EPROBE_DEFER) + return -EPROBE_DEFER; + hub->gpio_reset = of_get_named_gpio(np, "reset-gpios", 0); + if (hub->gpio_reset == -EPROBE_DEFER) + return -EPROBE_DEFER; + of_property_read_u32(np, "initial-mode", &mode); + hub->mode = mode; + } + + if (gpio_is_valid(hub->gpio_intn)) { + err = gpio_request_one(hub->gpio_intn, + GPIOF_OUT_INIT_HIGH, "usb3503 intn"); + if (err) { + dev_err(&i2c->dev, + "unable to request GPIO %d as connect pin (%d)\n", + hub->gpio_intn, err); + goto err_out; + } + } + + if (gpio_is_valid(hub->gpio_connect)) { + err = gpio_request_one(hub->gpio_connect, + GPIOF_OUT_INIT_HIGH, "usb3503 connect"); + if (err) { + dev_err(&i2c->dev, + "unable to request GPIO %d as connect pin (%d)\n", + hub->gpio_connect, err); + goto err_gpio_connect; + } + } + + if (gpio_is_valid(hub->gpio_reset)) { + err = gpio_request_one(hub->gpio_reset, + GPIOF_OUT_INIT_LOW, "usb3503 reset"); + if (err) { + dev_err(&i2c->dev, + "unable to request GPIO %d as reset pin (%d)\n", + hub->gpio_reset, err); + goto err_gpio_reset; + } + } + + usb3503_switch_mode(hub, hub->mode); + + dev_info(&i2c->dev, "%s: probed on %s mode\n", __func__, + (hub->mode == USB3503_MODE_HUB) ? "hub" : "standby"); + + return 0; + +err_gpio_reset: + if (gpio_is_valid(hub->gpio_connect)) + gpio_free(hub->gpio_connect); +err_gpio_connect: + if (gpio_is_valid(hub->gpio_intn)) + gpio_free(hub->gpio_intn); +err_out: + kfree(hub); + + return err; +} + +static int usb3503_remove(struct i2c_client *i2c) +{ + struct usb3503 *hub = i2c_get_clientdata(i2c); + + if (gpio_is_valid(hub->gpio_intn)) + gpio_free(hub->gpio_intn); + if (gpio_is_valid(hub->gpio_connect)) + gpio_free(hub->gpio_connect); + if (gpio_is_valid(hub->gpio_reset)) + gpio_free(hub->gpio_reset); + + kfree(hub); + + return 0; +} + +static const struct i2c_device_id usb3503_id[] = { + { USB3503_I2C_NAME, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, usb3503_id); + +#ifdef CONFIG_OF +static const struct of_device_id usb3503_of_match[] = { + { .compatible = "smsc,usb3503", }, + {}, +}; +MODULE_DEVICE_TABLE(of, usb3503_of_match); +#endif + +static struct i2c_driver usb3503_driver = { + .driver = { + .name = USB3503_I2C_NAME, + .of_match_table = of_match_ptr(usb3503_of_match), + }, + .probe = usb3503_probe, + .remove = usb3503_remove, + .id_table = usb3503_id, +}; + +static int __init usb3503_init(void) +{ + return i2c_add_driver(&usb3503_driver); +} + +static void __exit usb3503_exit(void) +{ + i2c_del_driver(&usb3503_driver); +} + +module_init(usb3503_init); +module_exit(usb3503_exit); + +MODULE_AUTHOR("Dongjin Kim <tobetter@gmail.com>"); +MODULE_DESCRIPTION("USB3503 USB HUB driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 055b84adeda..8b4ca1cb450 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -13,6 +13,12 @@ /*-------------------------------------------------------------------------*/ +static int override_alt = -1; +module_param_named(alt, override_alt, int, 0644); +MODULE_PARM_DESC(alt, ">= 0 to override altsetting selection"); + +/*-------------------------------------------------------------------------*/ + /* FIXME make these public somewhere; usbdevfs.h? */ struct usbtest_param { /* inputs */ @@ -103,6 +109,10 @@ get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf) iso_in = iso_out = NULL; alt = intf->altsetting + tmp; + if (override_alt >= 0 && + override_alt != alt->desc.bAlternateSetting) + continue; + /* take the first altsetting with in-bulk + out-bulk; * ignore other endpoints and altsettings. */ @@ -144,6 +154,7 @@ try_iso: found: udev = testdev_to_usbdev(dev); + dev->info->alt = alt->desc.bAlternateSetting; if (alt->desc.bAlternateSetting != 0) { tmp = usb_set_interface(udev, alt->desc.bInterfaceNumber, @@ -423,6 +434,9 @@ alloc_sglist(int nents, int max, int vary) unsigned i; unsigned size = max; + if (max == 0) + return NULL; + sg = kmalloc_array(nents, sizeof *sg, GFP_KERNEL); if (!sg) return NULL; @@ -2176,7 +2190,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) if (dev->out_pipe == 0 || !param->length || param->sglen < 4) break; retval = 0; - dev_info(&intf->dev, "TEST 17: unlink from %d queues of " + dev_info(&intf->dev, "TEST 24: unlink from %d queues of " "%d %d-byte writes\n", param->iterations, param->sglen, param->length); for (i = param->iterations; retval == 0 && i > 0; --i) { @@ -2277,7 +2291,7 @@ usbtest_probe(struct usb_interface *intf, const struct usb_device_id *id) wtest = " intr-out"; } } else { - if (info->autoconf) { + if (override_alt >= 0 || info->autoconf) { int status; status = get_endpoints(dev, intf); @@ -2386,6 +2400,7 @@ static struct usbtest_info gz_info = { .name = "Linux gadget zero", .autoconf = 1, .ctrl_out = 1, + .iso = 1, .alt = 0, }; diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 23a0b7f0892..05e51432dd2 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -7,10 +7,6 @@ config USB_MUSB_HDRC tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' depends on USB && USB_GADGET - select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN) - select NOP_USB_XCEIV if (SOC_TI81XX || SOC_AM33XX) - select TWL4030_USB if MACH_OMAP_3430SDP - select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA select USB_OTG_UTILS help Say Y here if your system has a dual role high speed USB @@ -45,6 +41,7 @@ config USB_MUSB_DA8XX config USB_MUSB_TUSB6010 tristate "TUSB6010" + depends on GENERIC_HARDIRQS config USB_MUSB_OMAP2PLUS tristate "OMAP2430 and onwards" diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index c964d6af178..59eea219034 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -34,8 +34,7 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/usb/nop-usb-xceiv.h> - -#include <plat/usb.h> +#include <linux/platform_data/usb-omap.h> #include "musb_core.h" @@ -366,7 +365,7 @@ static int am35x_musb_init(struct musb *musb) usb_nop_xceiv_register(); musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(musb->xceiv)) - return -ENODEV; + return -EPROBE_DEFER; setup_timer(&otg_workaround, otg_timer, (unsigned long) musb); @@ -455,7 +454,7 @@ static const struct musb_platform_ops am35x_ops = { static u64 am35x_dmamask = DMA_BIT_MASK(32); -static int __devinit am35x_probe(struct platform_device *pdev) +static int am35x_probe(struct platform_device *pdev) { struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data; struct platform_device *musb; @@ -465,7 +464,6 @@ static int __devinit am35x_probe(struct platform_device *pdev) struct clk *clk; int ret = -ENOMEM; - int musbid; glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { @@ -473,18 +471,10 @@ static int __devinit am35x_probe(struct platform_device *pdev) goto err0; } - /* get the musb id */ - musbid = musb_get_id(&pdev->dev, GFP_KERNEL); - if (musbid < 0) { - dev_err(&pdev->dev, "failed to allocate musb id\n"); - ret = -ENOMEM; - goto err1; - } - - musb = platform_device_alloc("musb-hdrc", musbid); + musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err2; + goto err1; } phy_clk = clk_get(&pdev->dev, "fck"); @@ -513,7 +503,6 @@ static int __devinit am35x_probe(struct platform_device *pdev) goto err6; } - musb->id = musbid; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &am35x_dmamask; musb->dev.coherent_dma_mask = am35x_dmamask; @@ -563,9 +552,6 @@ err4: err3: platform_device_put(musb); -err2: - musb_put_id(&pdev->dev, musbid); - err1: kfree(glue); @@ -573,13 +559,11 @@ err0: return ret; } -static int __devexit am35x_remove(struct platform_device *pdev) +static int am35x_remove(struct platform_device *pdev) { struct am35x_glue *glue = platform_get_drvdata(pdev); - musb_put_id(&pdev->dev, glue->musb->id); - platform_device_del(glue->musb); - platform_device_put(glue->musb); + platform_device_unregister(glue->musb); clk_disable(glue->clk); clk_disable(glue->phy_clk); clk_put(glue->clk); @@ -644,7 +628,7 @@ static struct dev_pm_ops am35x_pm_ops = { static struct platform_driver am35x_driver = { .probe = am35x_probe, - .remove = __devexit_p(am35x_remove), + .remove = am35x_remove, .driver = { .name = "musb-am35x", .pm = DEV_PM_OPS, @@ -654,15 +638,4 @@ static struct platform_driver am35x_driver = { MODULE_DESCRIPTION("AM35x MUSB Glue Layer"); MODULE_AUTHOR("Ajay Kumar Gupta <ajay.gupta@ti.com>"); MODULE_LICENSE("GPL v2"); - -static int __init am35x_init(void) -{ - return platform_driver_register(&am35x_driver); -} -module_init(am35x_init); - -static void __exit am35x_exit(void) -{ - platform_driver_unregister(&am35x_driver); -} -module_exit(am35x_exit); +module_platform_driver(am35x_driver); diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index e8cff9bb9d2..dbb31b30c7f 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -406,7 +406,7 @@ static int bfin_musb_init(struct musb *musb) musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(musb->xceiv)) { gpio_free(musb->config->gpio_vrsel); - return -ENODEV; + return -EPROBE_DEFER; } bfin_musb_reg_init(musb); @@ -448,14 +448,13 @@ static const struct musb_platform_ops bfin_ops = { static u64 bfin_dmamask = DMA_BIT_MASK(32); -static int __devinit bfin_probe(struct platform_device *pdev) +static int bfin_probe(struct platform_device *pdev) { struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data; struct platform_device *musb; struct bfin_glue *glue; int ret = -ENOMEM; - int musbid; glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { @@ -463,21 +462,12 @@ static int __devinit bfin_probe(struct platform_device *pdev) goto err0; } - /* get the musb id */ - musbid = musb_get_id(&pdev->dev, GFP_KERNEL); - if (musbid < 0) { - dev_err(&pdev->dev, "failed to allocate musb id\n"); - ret = -ENOMEM; - goto err1; - } - - musb = platform_device_alloc("musb-hdrc", musbid); + musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err2; + goto err1; } - musb->id = musbid; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &bfin_dmamask; musb->dev.coherent_dma_mask = bfin_dmamask; @@ -513,9 +503,6 @@ static int __devinit bfin_probe(struct platform_device *pdev) err3: platform_device_put(musb); -err2: - musb_put_id(&pdev->dev, musbid); - err1: kfree(glue); @@ -523,13 +510,11 @@ err0: return ret; } -static int __devexit bfin_remove(struct platform_device *pdev) +static int bfin_remove(struct platform_device *pdev) { struct bfin_glue *glue = platform_get_drvdata(pdev); - musb_put_id(&pdev->dev, glue->musb->id); - platform_device_del(glue->musb); - platform_device_put(glue->musb); + platform_device_unregister(glue->musb); kfree(glue); return 0; @@ -585,15 +570,4 @@ static struct platform_driver bfin_driver = { MODULE_DESCRIPTION("Blackfin MUSB Glue Layer"); MODULE_AUTHOR("Bryan Wy <cooloney@kernel.org>"); MODULE_LICENSE("GPL v2"); - -static int __init bfin_init(void) -{ - return platform_driver_register(&bfin_driver); -} -module_init(bfin_init); - -static void __exit bfin_exit(void) -{ - platform_driver_unregister(&bfin_driver); -} -module_exit(bfin_exit); +module_platform_driver(bfin_driver); diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index e19da82b478..f522000e8f0 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -105,7 +105,7 @@ static void cppi_reset_tx(struct cppi_tx_stateram __iomem *tx, u32 ptr) musb_writel(&tx->tx_complete, 0, ptr); } -static void __init cppi_pool_init(struct cppi *cppi, struct cppi_channel *c) +static void cppi_pool_init(struct cppi *cppi, struct cppi_channel *c) { int j; @@ -150,7 +150,7 @@ static void cppi_pool_free(struct cppi_channel *c) c->last_processed = NULL; } -static int __init cppi_controller_start(struct dma_controller *c) +static int cppi_controller_start(struct dma_controller *c) { struct cppi *controller; void __iomem *tibase; @@ -1314,10 +1314,10 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } +EXPORT_SYMBOL_GPL(cppi_interrupt); /* Instantiate a software object representing a DMA controller. */ -struct dma_controller *__devinit -dma_controller_create(struct musb *musb, void __iomem *mregs) +struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *mregs) { struct cppi *controller; struct device *dev = musb->controller; diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 8bc44b76eec..7c71769d71f 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -410,6 +410,7 @@ static int da8xx_musb_init(struct musb *musb) { void __iomem *reg_base = musb->ctrl_base; u32 rev; + int ret = -ENODEV; musb->mregs += DA8XX_MENTOR_CORE_OFFSET; @@ -420,8 +421,10 @@ static int da8xx_musb_init(struct musb *musb) usb_nop_xceiv_register(); musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); - if (IS_ERR_OR_NULL(musb->xceiv)) + if (IS_ERR_OR_NULL(musb->xceiv)) { + ret = -EPROBE_DEFER; goto fail; + } setup_timer(&otg_workaround, otg_timer, (unsigned long)musb); @@ -441,7 +444,7 @@ static int da8xx_musb_init(struct musb *musb) musb->isr = da8xx_musb_interrupt; return 0; fail: - return -ENODEV; + return ret; } static int da8xx_musb_exit(struct musb *musb) @@ -471,7 +474,7 @@ static const struct musb_platform_ops da8xx_ops = { static u64 da8xx_dmamask = DMA_BIT_MASK(32); -static int __devinit da8xx_probe(struct platform_device *pdev) +static int da8xx_probe(struct platform_device *pdev) { struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data; struct platform_device *musb; @@ -480,7 +483,6 @@ static int __devinit da8xx_probe(struct platform_device *pdev) struct clk *clk; int ret = -ENOMEM; - int musbid; glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { @@ -488,18 +490,10 @@ static int __devinit da8xx_probe(struct platform_device *pdev) goto err0; } - /* get the musb id */ - musbid = musb_get_id(&pdev->dev, GFP_KERNEL); - if (musbid < 0) { - dev_err(&pdev->dev, "failed to allocate musb id\n"); - ret = -ENOMEM; - goto err1; - } - - musb = platform_device_alloc("musb-hdrc", musbid); + musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err2; + goto err1; } clk = clk_get(&pdev->dev, "usb20"); @@ -515,7 +509,6 @@ static int __devinit da8xx_probe(struct platform_device *pdev) goto err4; } - musb->id = musbid; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &da8xx_dmamask; musb->dev.coherent_dma_mask = da8xx_dmamask; @@ -558,9 +551,6 @@ err4: err3: platform_device_put(musb); -err2: - musb_put_id(&pdev->dev, musbid); - err1: kfree(glue); @@ -568,13 +558,11 @@ err0: return ret; } -static int __devexit da8xx_remove(struct platform_device *pdev) +static int da8xx_remove(struct platform_device *pdev) { struct da8xx_glue *glue = platform_get_drvdata(pdev); - musb_put_id(&pdev->dev, glue->musb->id); - platform_device_del(glue->musb); - platform_device_put(glue->musb); + platform_device_unregister(glue->musb); clk_disable(glue->clk); clk_put(glue->clk); kfree(glue); @@ -584,7 +572,7 @@ static int __devexit da8xx_remove(struct platform_device *pdev) static struct platform_driver da8xx_driver = { .probe = da8xx_probe, - .remove = __devexit_p(da8xx_remove), + .remove = da8xx_remove, .driver = { .name = "musb-da8xx", }, @@ -593,15 +581,4 @@ static struct platform_driver da8xx_driver = { MODULE_DESCRIPTION("DA8xx/OMAP-L1x MUSB Glue Layer"); MODULE_AUTHOR("Sergei Shtylyov <sshtylyov@ru.mvista.com>"); MODULE_LICENSE("GPL v2"); - -static int __init da8xx_init(void) -{ - return platform_driver_register(&da8xx_driver); -} -module_init(da8xx_init); - -static void __exit da8xx_exit(void) -{ - platform_driver_unregister(&da8xx_driver); -} -module_exit(da8xx_exit); +module_platform_driver(da8xx_driver); diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 606bfd00cde..e040d910373 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -380,11 +380,14 @@ static int davinci_musb_init(struct musb *musb) { void __iomem *tibase = musb->ctrl_base; u32 revision; + int ret = -ENODEV; usb_nop_xceiv_register(); musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); - if (IS_ERR_OR_NULL(musb->xceiv)) + if (IS_ERR_OR_NULL(musb->xceiv)) { + ret = -EPROBE_DEFER; goto unregister; + } musb->mregs += DAVINCI_BASE_OFFSET; @@ -438,7 +441,7 @@ fail: usb_put_phy(musb->xceiv); unregister: usb_nop_xceiv_unregister(); - return -ENODEV; + return ret; } static int davinci_musb_exit(struct musb *musb) @@ -504,7 +507,7 @@ static const struct musb_platform_ops davinci_ops = { static u64 davinci_dmamask = DMA_BIT_MASK(32); -static int __devinit davinci_probe(struct platform_device *pdev) +static int davinci_probe(struct platform_device *pdev) { struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data; struct platform_device *musb; @@ -512,7 +515,6 @@ static int __devinit davinci_probe(struct platform_device *pdev) struct clk *clk; int ret = -ENOMEM; - int musbid; glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { @@ -520,18 +522,10 @@ static int __devinit davinci_probe(struct platform_device *pdev) goto err0; } - /* get the musb id */ - musbid = musb_get_id(&pdev->dev, GFP_KERNEL); - if (musbid < 0) { - dev_err(&pdev->dev, "failed to allocate musb id\n"); - ret = -ENOMEM; - goto err1; - } - - musb = platform_device_alloc("musb-hdrc", musbid); + musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err2; + goto err1; } clk = clk_get(&pdev->dev, "usb"); @@ -547,7 +541,6 @@ static int __devinit davinci_probe(struct platform_device *pdev) goto err4; } - musb->id = musbid; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &davinci_dmamask; musb->dev.coherent_dma_mask = davinci_dmamask; @@ -590,9 +583,6 @@ err4: err3: platform_device_put(musb); -err2: - musb_put_id(&pdev->dev, musbid); - err1: kfree(glue); @@ -600,13 +590,11 @@ err0: return ret; } -static int __devexit davinci_remove(struct platform_device *pdev) +static int davinci_remove(struct platform_device *pdev) { struct davinci_glue *glue = platform_get_drvdata(pdev); - musb_put_id(&pdev->dev, glue->musb->id); - platform_device_del(glue->musb); - platform_device_put(glue->musb); + platform_device_unregister(glue->musb); clk_disable(glue->clk); clk_put(glue->clk); kfree(glue); @@ -616,7 +604,7 @@ static int __devexit davinci_remove(struct platform_device *pdev) static struct platform_driver davinci_driver = { .probe = davinci_probe, - .remove = __devexit_p(davinci_remove), + .remove = davinci_remove, .driver = { .name = "musb-davinci", }, @@ -625,15 +613,4 @@ static struct platform_driver davinci_driver = { MODULE_DESCRIPTION("DaVinci MUSB Glue Layer"); MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); MODULE_LICENSE("GPL v2"); - -static int __init davinci_init(void) -{ - return platform_driver_register(&davinci_driver); -} -module_init(davinci_init); - -static void __exit davinci_exit(void) -{ - platform_driver_unregister(&davinci_driver); -} -module_exit(davinci_exit); +module_platform_driver(davinci_driver); diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index bb56a0e8b23..daec6e0f7e3 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -116,7 +116,6 @@ #define MUSB_DRIVER_NAME "musb-hdrc" const char musb_driver_name[] = MUSB_DRIVER_NAME; -static DEFINE_IDA(musb_ida); MODULE_DESCRIPTION(DRIVER_INFO); MODULE_AUTHOR(DRIVER_AUTHOR); @@ -133,35 +132,6 @@ static inline struct musb *dev_to_musb(struct device *dev) /*-------------------------------------------------------------------------*/ -int musb_get_id(struct device *dev, gfp_t gfp_mask) -{ - int ret; - int id; - - ret = ida_pre_get(&musb_ida, gfp_mask); - if (!ret) { - dev_err(dev, "failed to reserve resource for id\n"); - return -ENOMEM; - } - - ret = ida_get_new(&musb_ida, &id); - if (ret < 0) { - dev_err(dev, "failed to allocate a new id\n"); - return ret; - } - - return id; -} -EXPORT_SYMBOL_GPL(musb_get_id); - -void musb_put_id(struct device *dev, int id) -{ - - dev_dbg(dev, "removing id %d\n", id); - ida_remove(&musb_ida, id); -} -EXPORT_SYMBOL_GPL(musb_put_id); - #ifndef CONFIG_BLACKFIN static int musb_ulpi_read(struct usb_phy *phy, u32 offset) { @@ -281,7 +251,7 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) /* best case is 32bit-aligned source address */ if ((0x02 & (unsigned long) src) == 0) { if (len >= 4) { - writesl(fifo, src + index, len >> 2); + iowrite32_rep(fifo, src + index, len >> 2); index += len & ~0x03; } if (len & 0x02) { @@ -290,7 +260,7 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) } } else { if (len >= 2) { - writesw(fifo, src + index, len >> 1); + iowrite16_rep(fifo, src + index, len >> 1); index += len & ~0x01; } } @@ -298,7 +268,7 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) musb_writeb(fifo, 0, src[index]); } else { /* byte aligned */ - writesb(fifo, src, len); + iowrite8_rep(fifo, src, len); } } @@ -324,7 +294,7 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) /* best case is 32bit-aligned destination address */ if ((0x02 & (unsigned long) dst) == 0) { if (len >= 4) { - readsl(fifo, dst, len >> 2); + ioread32_rep(fifo, dst, len >> 2); index = len & ~0x03; } if (len & 0x02) { @@ -333,7 +303,7 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) } } else { if (len >= 2) { - readsw(fifo, dst, len >> 1); + ioread16_rep(fifo, dst, len >> 1); index = len & ~0x01; } } @@ -341,7 +311,7 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) dst[index] = musb_readb(fifo, 0); } else { /* byte aligned */ - readsb(fifo, dst, len); + ioread8_rep(fifo, dst, len); } } #endif @@ -467,12 +437,12 @@ void musb_hnp_stop(struct musb *musb) */ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, - u8 devctl, u8 power) + u8 devctl) { struct usb_otg *otg = musb->xceiv->otg; irqreturn_t handled = IRQ_NONE; - dev_dbg(musb->controller, "<== Power=%02x, DevCtl=%02x, int_usb=0x%x\n", power, devctl, + dev_dbg(musb->controller, "<== DevCtl=%02x, int_usb=0x%x\n", devctl, int_usb); /* in host mode, the peripheral may issue remote wakeup. @@ -485,6 +455,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, if (devctl & MUSB_DEVCTL_HM) { void __iomem *mbase = musb->mregs; + u8 power; switch (musb->xceiv->state) { case OTG_STATE_A_SUSPEND: @@ -492,6 +463,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, * will stop RESUME signaling */ + power = musb_readb(musb->mregs, MUSB_POWER); if (power & MUSB_POWER_SUSPENDM) { /* spurious */ musb->int_usb &= ~MUSB_INTR_SUSPEND; @@ -655,8 +627,8 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, } if (int_usb & MUSB_INTR_SUSPEND) { - dev_dbg(musb->controller, "SUSPEND (%s) devctl %02x power %02x\n", - otg_state_string(musb->xceiv->state), devctl, power); + dev_dbg(musb->controller, "SUSPEND (%s) devctl %02x\n", + otg_state_string(musb->xceiv->state), devctl); handled = IRQ_HANDLED; switch (musb->xceiv->state) { @@ -722,8 +694,10 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, if (is_peripheral_active(musb)) { /* REVISIT HNP; just force disconnect */ } - musb_writew(musb->mregs, MUSB_INTRTXE, musb->epmask); - musb_writew(musb->mregs, MUSB_INTRRXE, musb->epmask & 0xfffe); + musb->intrtxe = musb->epmask; + musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe); + musb->intrrxe = musb->epmask & 0xfffe; + musb_writew(musb->mregs, MUSB_INTRRXE, musb->intrrxe); musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7); musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED |USB_PORT_STAT_HIGH_SPEED @@ -944,8 +918,10 @@ void musb_start(struct musb *musb) dev_dbg(musb->controller, "<== devctl %02x\n", devctl); /* Set INT enable registers, enable interrupts */ - musb_writew(regs, MUSB_INTRTXE, musb->epmask); - musb_writew(regs, MUSB_INTRRXE, musb->epmask & 0xfffe); + musb->intrtxe = musb->epmask; + musb_writew(regs, MUSB_INTRTXE, musb->intrtxe); + musb->intrrxe = musb->epmask & 0xfffe; + musb_writew(regs, MUSB_INTRRXE, musb->intrrxe); musb_writeb(regs, MUSB_INTRUSBE, 0xf7); musb_writeb(regs, MUSB_TESTMODE, 0); @@ -983,7 +959,9 @@ static void musb_generic_disable(struct musb *musb) /* disable interrupts */ musb_writeb(mbase, MUSB_INTRUSBE, 0); + musb->intrtxe = 0; musb_writew(mbase, MUSB_INTRTXE, 0); + musb->intrrxe = 0; musb_writew(mbase, MUSB_INTRRXE, 0); /* off */ @@ -1062,12 +1040,12 @@ static void musb_shutdown(struct platform_device *pdev) || defined(CONFIG_USB_MUSB_AM35X_MODULE) \ || defined(CONFIG_USB_MUSB_DSPS) \ || defined(CONFIG_USB_MUSB_DSPS_MODULE) -static ushort __devinitdata fifo_mode = 4; +static ushort fifo_mode = 4; #elif defined(CONFIG_USB_MUSB_UX500) \ || defined(CONFIG_USB_MUSB_UX500_MODULE) -static ushort __devinitdata fifo_mode = 5; +static ushort fifo_mode = 5; #else -static ushort __devinitdata fifo_mode = 2; +static ushort fifo_mode = 2; #endif /* "modprobe ... fifo_mode=1" etc */ @@ -1080,7 +1058,7 @@ MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration"); */ /* mode 0 - fits in 2KB */ -static struct musb_fifo_cfg __devinitdata mode_0_cfg[] = { +static struct musb_fifo_cfg mode_0_cfg[] = { { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, { .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, }, @@ -1089,7 +1067,7 @@ static struct musb_fifo_cfg __devinitdata mode_0_cfg[] = { }; /* mode 1 - fits in 4KB */ -static struct musb_fifo_cfg __devinitdata mode_1_cfg[] = { +static struct musb_fifo_cfg mode_1_cfg[] = { { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, .mode = BUF_DOUBLE, }, { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, .mode = BUF_DOUBLE, }, { .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, }, @@ -1098,7 +1076,7 @@ static struct musb_fifo_cfg __devinitdata mode_1_cfg[] = { }; /* mode 2 - fits in 4KB */ -static struct musb_fifo_cfg __devinitdata mode_2_cfg[] = { +static struct musb_fifo_cfg mode_2_cfg[] = { { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, @@ -1108,7 +1086,7 @@ static struct musb_fifo_cfg __devinitdata mode_2_cfg[] = { }; /* mode 3 - fits in 4KB */ -static struct musb_fifo_cfg __devinitdata mode_3_cfg[] = { +static struct musb_fifo_cfg mode_3_cfg[] = { { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, .mode = BUF_DOUBLE, }, { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, .mode = BUF_DOUBLE, }, { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, @@ -1118,7 +1096,7 @@ static struct musb_fifo_cfg __devinitdata mode_3_cfg[] = { }; /* mode 4 - fits in 16KB */ -static struct musb_fifo_cfg __devinitdata mode_4_cfg[] = { +static struct musb_fifo_cfg mode_4_cfg[] = { { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, @@ -1149,7 +1127,7 @@ static struct musb_fifo_cfg __devinitdata mode_4_cfg[] = { }; /* mode 5 - fits in 8KB */ -static struct musb_fifo_cfg __devinitdata mode_5_cfg[] = { +static struct musb_fifo_cfg mode_5_cfg[] = { { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, @@ -1185,7 +1163,7 @@ static struct musb_fifo_cfg __devinitdata mode_5_cfg[] = { * * returns negative errno or offset for next fifo. */ -static int __devinit +static int fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep, const struct musb_fifo_cfg *cfg, u16 offset) { @@ -1256,11 +1234,11 @@ fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep, return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0)); } -static struct musb_fifo_cfg __devinitdata ep0_cfg = { +static struct musb_fifo_cfg ep0_cfg = { .style = FIFO_RXTX, .maxpacket = 64, }; -static int __devinit ep_config_from_table(struct musb *musb) +static int ep_config_from_table(struct musb *musb) { const struct musb_fifo_cfg *cfg; unsigned i, n; @@ -1351,7 +1329,7 @@ done: * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false * @param musb the controller */ -static int __devinit ep_config_from_hw(struct musb *musb) +static int ep_config_from_hw(struct musb *musb) { u8 epnum = 0; struct musb_hw_ep *hw_ep; @@ -1398,7 +1376,7 @@ enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, }; /* Initialize MUSB (M)HDRC part of the USB hardware subsystem; * configure endpoints, or take their config from silicon */ -static int __devinit musb_core_init(u16 musb_type, struct musb *musb) +static int musb_core_init(u16 musb_type, struct musb *musb) { u8 reg; char *type; @@ -1523,33 +1501,6 @@ static int __devinit musb_core_init(u16 musb_type, struct musb *musb) /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430) || \ - defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500) - -static irqreturn_t generic_interrupt(int irq, void *__hci) -{ - unsigned long flags; - irqreturn_t retval = IRQ_NONE; - struct musb *musb = __hci; - - spin_lock_irqsave(&musb->lock, flags); - - musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB); - musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX); - musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX); - - if (musb->int_usb || musb->int_tx || musb->int_rx) - retval = musb_interrupt(musb); - - spin_unlock_irqrestore(&musb->lock, flags); - - return retval; -} - -#else -#define generic_interrupt NULL -#endif - /* * handle all the irqs defined by the HDRC core. for now we expect: other * irq sources (phy, dma, etc) will be handled first, musb->int_* values @@ -1560,12 +1511,11 @@ static irqreturn_t generic_interrupt(int irq, void *__hci) irqreturn_t musb_interrupt(struct musb *musb) { irqreturn_t retval = IRQ_NONE; - u8 devctl, power; + u8 devctl; int ep_num; u32 reg; devctl = musb_readb(musb->mregs, MUSB_DEVCTL); - power = musb_readb(musb->mregs, MUSB_POWER); dev_dbg(musb->controller, "** IRQ %s usb%04x tx%04x rx%04x\n", (devctl & MUSB_DEVCTL_HM) ? "host" : "peripheral", @@ -1576,7 +1526,7 @@ irqreturn_t musb_interrupt(struct musb *musb) */ if (musb->int_usb) retval |= musb_stage0_irq(musb, musb->int_usb, - devctl, power); + devctl); /* "stage 1" is handling endpoint irqs */ @@ -1628,7 +1578,7 @@ irqreturn_t musb_interrupt(struct musb *musb) EXPORT_SYMBOL_GPL(musb_interrupt); #ifndef CONFIG_MUSB_PIO_ONLY -static bool __devinitdata use_dma = 1; +static bool use_dma = 1; /* "modprobe ... use_dma=0" etc */ module_param(use_dma, bool, 0); @@ -1674,8 +1624,6 @@ EXPORT_SYMBOL_GPL(musb_dma_completion); /*-------------------------------------------------------------------------*/ -#ifdef CONFIG_SYSFS - static ssize_t musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -1792,8 +1740,6 @@ static const struct attribute_group musb_attr_group = { .attrs = musb_attributes, }; -#endif /* sysfs */ - /* Only used to provide driver mode change events */ static void musb_irq_work(struct work_struct *data) { @@ -1809,8 +1755,7 @@ static void musb_irq_work(struct work_struct *data) * Init support */ -static struct musb *__devinit -allocate_instance(struct device *dev, +static struct musb *allocate_instance(struct device *dev, struct musb_hdrc_config *config, void __iomem *mbase) { struct musb *musb; @@ -1885,7 +1830,7 @@ static void musb_free(struct musb *musb) * @ctrl: virtual address of controller registers, * not yet corrected for platform-specific offsets */ -static int __devinit +static int musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) { int status; @@ -1919,7 +1864,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb->ops = plat->platform_ops; /* The musb_platform_init() call: - * - adjusts musb->mregs and musb->isr if needed, + * - adjusts musb->mregs + * - sets the musb->isr * - may initialize an integrated tranceiver * - initializes musb->xceiv, usually by otg_get_phy() * - stops powering VBUS @@ -1929,7 +1875,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) * external/discrete ones in various flavors (twl4030 family, * isp1504, non-OTG, etc) mostly hooking up through ULPI. */ - musb->isr = generic_interrupt; status = musb_platform_init(musb); if (status < 0) goto fail1; @@ -2019,11 +1964,9 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) if (status < 0) goto fail4; -#ifdef CONFIG_SYSFS status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group); if (status) goto fail5; -#endif pm_runtime_put(musb->controller); @@ -2044,6 +1987,7 @@ fail2: musb_platform_exit(musb); fail1: + pm_runtime_disable(musb->controller); dev_err(musb->controller, "musb_init_controller failed with status %d\n", status); @@ -2060,7 +2004,7 @@ fail0: /* all implementations (PCI bridge to FPGA, VLYNQ, etc) should just * bridge to a platform device; this driver then suffices. */ -static int __devinit musb_probe(struct platform_device *pdev) +static int musb_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; int irq = platform_get_irq_byname(pdev, "mc"); @@ -2085,7 +2029,7 @@ static int __devinit musb_probe(struct platform_device *pdev) return status; } -static int __devexit musb_remove(struct platform_device *pdev) +static int musb_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct musb *musb = dev_to_musb(dev); @@ -2120,8 +2064,6 @@ static void musb_save_context(struct musb *musb) musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE); musb->context.busctl = musb_read_ulpi_buscontrol(musb->mregs); musb->context.power = musb_readb(musb_base, MUSB_POWER); - musb->context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE); - musb->context.intrrxe = musb_readw(musb_base, MUSB_INTRRXE); musb->context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE); musb->context.index = musb_readb(musb_base, MUSB_INDEX); musb->context.devctl = musb_readb(musb_base, MUSB_DEVCTL); @@ -2194,8 +2136,8 @@ static void musb_restore_context(struct musb *musb) musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode); musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl); musb_writeb(musb_base, MUSB_POWER, musb->context.power); - musb_writew(musb_base, MUSB_INTRTXE, musb->context.intrtxe); - musb_writew(musb_base, MUSB_INTRRXE, musb->context.intrrxe); + musb_writew(musb_base, MUSB_INTRTXE, musb->intrtxe); + musb_writew(musb_base, MUSB_INTRRXE, musb->intrrxe); musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe); musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl); @@ -2340,7 +2282,7 @@ static struct platform_driver musb_driver = { .pm = MUSB_DEV_PM_OPS, }, .probe = musb_probe, - .remove = __devexit_p(musb_remove), + .remove = musb_remove, .shutdown = musb_shutdown, }; @@ -2351,10 +2293,7 @@ static int __init musb_init(void) if (usb_disabled()) return 0; - pr_info("%s: version " MUSB_VERSION ", " - "?dma?" - ", " - "otg (peripheral+host)", + pr_info("%s: version " MUSB_VERSION ", ?dma?, otg (peripheral+host)\n", musb_driver_name); return platform_driver_register(&musb_driver); } diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index c158aacd6de..7fb4819a6f1 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -288,7 +288,6 @@ struct musb_csr_regs { struct musb_context_registers { u8 power; - u16 intrtxe, intrrxe; u8 intrusbe; u16 frame; u8 index, testmode; @@ -313,6 +312,8 @@ struct musb { struct work_struct irq_work; u16 hwvers; + u16 intrrxe; + u16 intrtxe; /* this hub status bit is reserved by USB 2.0 and not seen by usbcore */ #define MUSB_PORT_STAT_RESUME (1 << 31) @@ -521,8 +522,6 @@ extern const char musb_driver_name[]; extern void musb_start(struct musb *musb); extern void musb_stop(struct musb *musb); -extern int musb_get_id(struct device *dev, gfp_t gfp_mask); -extern void musb_put_id(struct device *dev, int id); extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src); extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst); diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c index 1d6e8af94c0..4c216790e86 100644 --- a/drivers/usb/musb/musb_debugfs.c +++ b/drivers/usb/musb/musb_debugfs.c @@ -233,7 +233,7 @@ static const struct file_operations musb_test_mode_fops = { .release = single_release, }; -int __devinit musb_init_debugfs(struct musb *musb) +int musb_init_debugfs(struct musb *musb) { struct dentry *root; struct dentry *file; diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h index 24d39210d4a..1b6b827b769 100644 --- a/drivers/usb/musb/musb_dma.h +++ b/drivers/usb/musb/musb_dma.h @@ -178,8 +178,7 @@ struct dma_controller { extern void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit); -extern struct dma_controller *__devinit -dma_controller_create(struct musb *, void __iomem *); +extern struct dma_controller *dma_controller_create(struct musb *, void __iomem *); extern void dma_controller_destroy(struct dma_controller *); diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index ff5f112053d..6bb89715b63 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -31,20 +31,18 @@ #include <linux/init.h> #include <linux/io.h> -#include <linux/of.h> #include <linux/err.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/pm_runtime.h> #include <linux/module.h> #include <linux/usb/nop-usb-xceiv.h> +#include <linux/platform_data/usb-omap.h> #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_address.h> -#include <plat/usb.h> - #include "musb_core.h" #ifdef CONFIG_OF @@ -124,8 +122,49 @@ struct dsps_glue { const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */ struct timer_list timer[2]; /* otg_workaround timer */ unsigned long last_timer[2]; /* last timer data for each instance */ + u32 __iomem *usb_ctrl[2]; +}; + +#define DSPS_AM33XX_CONTROL_MODULE_PHYS_0 0x44e10620 +#define DSPS_AM33XX_CONTROL_MODULE_PHYS_1 0x44e10628 + +static const resource_size_t dsps_control_module_phys[] = { + DSPS_AM33XX_CONTROL_MODULE_PHYS_0, + DSPS_AM33XX_CONTROL_MODULE_PHYS_1, }; +#define USBPHY_CM_PWRDN (1 << 0) +#define USBPHY_OTG_PWRDN (1 << 1) +#define USBPHY_OTGVDET_EN (1 << 19) +#define USBPHY_OTGSESSEND_EN (1 << 20) + +/** + * musb_dsps_phy_control - phy on/off + * @glue: struct dsps_glue * + * @id: musb instance + * @on: flag for phy to be switched on or off + * + * This is to enable the PHY using usb_ctrl register in system control + * module space. + * + * XXX: This function will be removed once we have a seperate driver for + * control module + */ +static void musb_dsps_phy_control(struct dsps_glue *glue, u8 id, u8 on) +{ + u32 usbphycfg; + + usbphycfg = readl(glue->usb_ctrl[id]); + + if (on) { + usbphycfg &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN); + usbphycfg |= USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN; + } else { + usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN; + } + + writel(usbphycfg, glue->usb_ctrl[id]); +} /** * dsps_musb_enable - enable interrupts */ @@ -296,7 +335,7 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) * Also, DRVVBUS pulses for SRP (but not at 5V) ... */ if (usbintr & MUSB_INTR_BABBLE) - pr_info("CAUTION: musb: Babble Interrupt Occured\n"); + pr_info("CAUTION: musb: Babble Interrupt Occurred\n"); if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) { int drvvbus = dsps_readl(reg_base, wrp->status); @@ -365,11 +404,9 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) static int dsps_musb_init(struct musb *musb) { struct device *dev = musb->controller; - struct musb_hdrc_platform_data *plat = dev->platform_data; struct platform_device *pdev = to_platform_device(dev); struct dsps_glue *glue = dev_get_drvdata(dev->parent); const struct dsps_musb_wrapper *wrp = glue->wrp; - struct omap_musb_board_data *data = plat->board_data; void __iomem *reg_base = musb->ctrl_base; u32 rev, val; int status; @@ -377,10 +414,11 @@ static int dsps_musb_init(struct musb *musb) /* mentor core register starts at offset of 0x400 from musb base */ musb->mregs += wrp->musb_core_offset; - /* Get the NOP PHY */ + /* NOP driver needs change if supporting dual instance */ + usb_nop_xceiv_register(); musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(musb->xceiv)) - return -ENODEV; + return -EPROBE_DEFER; /* Returns zero if e.g. not clocked */ rev = dsps_readl(reg_base, wrp->revision); @@ -395,8 +433,7 @@ static int dsps_musb_init(struct musb *musb) dsps_writel(reg_base, wrp->control, (1 << wrp->reset)); /* Start the on-chip PHY and its PLL. */ - if (data->set_phy_power) - data->set_phy_power(1); + musb_dsps_phy_control(glue, pdev->id, 1); musb->isr = dsps_interrupt; @@ -418,16 +455,13 @@ err0: static int dsps_musb_exit(struct musb *musb) { struct device *dev = musb->controller; - struct musb_hdrc_platform_data *plat = dev->platform_data; - struct omap_musb_board_data *data = plat->board_data; struct platform_device *pdev = to_platform_device(dev); struct dsps_glue *glue = dev_get_drvdata(dev->parent); del_timer_sync(&glue->timer[pdev->id]); /* Shutdown the on-chip PHY and its PLL. */ - if (data->set_phy_power) - data->set_phy_power(0); + musb_dsps_phy_control(glue, pdev->id, 0); /* NOP driver needs change if supporting dual instance */ usb_put_phy(musb->xceiv); @@ -448,7 +482,7 @@ static struct musb_platform_ops dsps_ops = { static u64 musb_dmamask = DMA_BIT_MASK(32); -static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) +static int dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) { struct device *dev = glue->dev; struct platform_device *pdev = to_platform_device(dev); @@ -459,24 +493,32 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) struct resource *res; struct resource resources[2]; char res_name[11]; - int ret, musbid; + int ret; - /* get memory resource */ - snprintf(res_name, sizeof(res_name), "musb%d", id); - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name); + resources[0].start = dsps_control_module_phys[id]; + resources[0].end = resources[0].start + SZ_4 - 1; + resources[0].flags = IORESOURCE_MEM; + + glue->usb_ctrl[id] = devm_ioremap_resource(&pdev->dev, resources); + if (IS_ERR(glue->usb_ctrl[id])) { + ret = PTR_ERR(glue->usb_ctrl[id]); + goto err0; + } + + /* first resource is for usbss, so start index from 1 */ + res = platform_get_resource(pdev, IORESOURCE_MEM, id + 1); if (!res) { - dev_err(dev, "%s get mem resource failed\n", res_name); + dev_err(dev, "failed to get memory for instance %d\n", id); ret = -ENODEV; goto err0; } res->parent = NULL; resources[0] = *res; - /* get irq resource */ - snprintf(res_name, sizeof(res_name), "musb%d-irq", id); - res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name); + /* first resource is for usbss, so start index from 1 */ + res = platform_get_resource(pdev, IORESOURCE_IRQ, id + 1); if (!res) { - dev_err(dev, "%s get irq resource failed\n", res_name); + dev_err(dev, "failed to get irq for instance %d\n", id); ret = -ENODEV; goto err0; } @@ -484,22 +526,14 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) resources[1] = *res; resources[1].name = "mc"; - /* get the musb id */ - musbid = musb_get_id(dev, GFP_KERNEL); - if (musbid < 0) { - dev_err(dev, "failed to allocate musb id\n"); - ret = -ENOMEM; - goto err0; - } /* allocate the child platform device */ - musb = platform_device_alloc("musb-hdrc", musbid); + musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); if (!musb) { dev_err(dev, "failed to allocate musb device\n"); ret = -ENOMEM; - goto err1; + goto err0; } - musb->id = musbid; musb->dev.parent = dev; musb->dev.dma_mask = &musb_dmamask; musb->dev.coherent_dma_mask = musb_dmamask; @@ -556,20 +590,11 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) err2: platform_device_put(musb); -err1: - musb_put_id(dev, musbid); err0: return ret; } -static void dsps_delete_musb_pdev(struct dsps_glue *glue, u8 id) -{ - musb_put_id(glue->dev, glue->musb[id]->id); - platform_device_del(glue->musb[id]); - platform_device_put(glue->musb[id]); -} - -static int __devinit dsps_probe(struct platform_device *pdev) +static int dsps_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; const struct of_device_id *match; @@ -628,7 +653,7 @@ static int __devinit dsps_probe(struct platform_device *pdev) dev_err(&pdev->dev, "failed to create child pdev\n"); /* release resources of previously created instances */ for (i--; i >= 0 ; i--) - dsps_delete_musb_pdev(glue, i); + platform_device_unregister(glue->musb[i]); goto err3; } } @@ -645,7 +670,7 @@ err1: err0: return ret; } -static int __devexit dsps_remove(struct platform_device *pdev) +static int dsps_remove(struct platform_device *pdev) { struct dsps_glue *glue = platform_get_drvdata(pdev); const struct dsps_musb_wrapper *wrp = glue->wrp; @@ -653,7 +678,7 @@ static int __devexit dsps_remove(struct platform_device *pdev) /* delete the child platform device */ for (i = 0; i < wrp->instances ; i++) - dsps_delete_musb_pdev(glue, i); + platform_device_unregister(glue->musb[i]); /* disable usbss clocks */ pm_runtime_put(&pdev->dev); @@ -666,24 +691,26 @@ static int __devexit dsps_remove(struct platform_device *pdev) #ifdef CONFIG_PM_SLEEP static int dsps_suspend(struct device *dev) { - struct musb_hdrc_platform_data *plat = dev->platform_data; - struct omap_musb_board_data *data = plat->board_data; + struct platform_device *pdev = to_platform_device(dev->parent); + struct dsps_glue *glue = platform_get_drvdata(pdev); + const struct dsps_musb_wrapper *wrp = glue->wrp; + int i; - /* Shutdown the on-chip PHY and its PLL. */ - if (data->set_phy_power) - data->set_phy_power(0); + for (i = 0; i < wrp->instances; i++) + musb_dsps_phy_control(glue, i, 0); return 0; } static int dsps_resume(struct device *dev) { - struct musb_hdrc_platform_data *plat = dev->platform_data; - struct omap_musb_board_data *data = plat->board_data; + struct platform_device *pdev = to_platform_device(dev->parent); + struct dsps_glue *glue = platform_get_drvdata(pdev); + const struct dsps_musb_wrapper *wrp = glue->wrp; + int i; - /* Start the on-chip PHY and its PLL. */ - if (data->set_phy_power) - data->set_phy_power(1); + for (i = 0; i < wrp->instances; i++) + musb_dsps_phy_control(glue, i, 1); return 0; } @@ -691,7 +718,7 @@ static int dsps_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(dsps_pm_ops, dsps_suspend, dsps_resume); -static const struct dsps_musb_wrapper ti81xx_driver_data __devinitconst = { +static const struct dsps_musb_wrapper ti81xx_driver_data = { .revision = 0x00, .control = 0x14, .status = 0x18, @@ -719,10 +746,10 @@ static const struct dsps_musb_wrapper ti81xx_driver_data __devinitconst = { .rxep_bitmap = (0xfffe << 16), .musb_core_offset = 0x400, .poll_seconds = 2, - .instances = 2, + .instances = 1, }; -static const struct platform_device_id musb_dsps_id_table[] __devinitconst = { +static const struct platform_device_id musb_dsps_id_table[] = { { .name = "musb-ti81xx", .driver_data = (kernel_ulong_t) &ti81xx_driver_data, @@ -732,7 +759,7 @@ static const struct platform_device_id musb_dsps_id_table[] __devinitconst = { MODULE_DEVICE_TABLE(platform, musb_dsps_id_table); #ifdef CONFIG_OF -static const struct of_device_id musb_dsps_of_match[] __devinitconst = { +static const struct of_device_id musb_dsps_of_match[] = { { .compatible = "ti,musb-am33xx", .data = (void *) &ti81xx_driver_data, }, { }, @@ -742,7 +769,7 @@ MODULE_DEVICE_TABLE(of, musb_dsps_of_match); static struct platform_driver dsps_usbss_driver = { .probe = dsps_probe, - .remove = __devexit_p(dsps_remove), + .remove = dsps_remove, .driver = { .name = "musb-dsps", .pm = &dsps_pm_ops, diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index d0b87e7b4ab..be18537c5f1 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -408,7 +408,19 @@ static void txstate(struct musb *musb, struct musb_request *req) csr |= (MUSB_TXCSR_DMAENAB | MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE); - if (!musb_ep->hb_mult) + /* + * Enable Autoset according to table + * below + * bulk_split hb_mult Autoset_Enable + * 0 0 Yes(Normal) + * 0 >0 No(High BW ISO) + * 1 0 Yes(HS bulk) + * 1 >0 Yes(FS bulk) + */ + if (!musb_ep->hb_mult || + (musb_ep->hb_mult && + can_bulk_split(musb, + musb_ep->type))) csr |= MUSB_TXCSR_AUTOSET; } csr &= ~MUSB_TXCSR_P_UNDERRUN; @@ -707,11 +719,12 @@ static void rxstate(struct musb *musb, struct musb_request *req) fifo_count = musb_readw(epio, MUSB_RXCOUNT); /* - * use mode 1 only if we expect data of at least ep packet_sz - * and have not yet received a short packet + * Enable Mode 1 on RX transfers only when short_not_ok flag + * is set. Currently short_not_ok flag is set only from + * file_storage and f_mass_storage drivers */ - if ((request->length - request->actual >= musb_ep->packet_sz) && - (fifo_count >= musb_ep->packet_sz)) + + if (request->short_not_ok && fifo_count == musb_ep->packet_sz) use_mode_1 = 1; else use_mode_1 = 0; @@ -727,6 +740,27 @@ static void rxstate(struct musb *musb, struct musb_request *req) c = musb->dma_controller; channel = musb_ep->dma; + /* We use DMA Req mode 0 in rx_csr, and DMA controller operates in + * mode 0 only. So we do not get endpoint interrupts due to DMA + * completion. We only get interrupts from DMA controller. + * + * We could operate in DMA mode 1 if we knew the size of the tranfer + * in advance. For mass storage class, request->length = what the host + * sends, so that'd work. But for pretty much everything else, + * request->length is routinely more than what the host sends. For + * most these gadgets, end of is signified either by a short packet, + * or filling the last byte of the buffer. (Sending extra data in + * that last pckate should trigger an overflow fault.) But in mode 1, + * we don't get DMA completion interrupt for short packets. + * + * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1), + * to get endpoint interrupt on every DMA req, but that didn't seem + * to work reliably. + * + * REVISIT an updated g_file_storage can set req->short_not_ok, which + * then becomes usable as a runtime "use mode 1" hint... + */ + /* Experimental: Mode1 works with mass storage use cases */ if (use_mode_1) { csr |= MUSB_RXCSR_AUTOCLEAR; @@ -1068,7 +1102,6 @@ static int musb_gadget_enable(struct usb_ep *ep, */ musb_ep_select(mbase, epnum); if (usb_endpoint_dir_in(desc)) { - u16 int_txe = musb_readw(mbase, MUSB_INTRTXE); if (hw_ep->is_shared_fifo) musb_ep->is_in = 1; @@ -1080,8 +1113,8 @@ static int musb_gadget_enable(struct usb_ep *ep, goto fail; } - int_txe |= (1 << epnum); - musb_writew(mbase, MUSB_INTRTXE, int_txe); + musb->intrtxe |= (1 << epnum); + musb_writew(mbase, MUSB_INTRTXE, musb->intrtxe); /* REVISIT if can_bulk_split(), use by updating "tmp"; * likewise high bandwidth periodic tx @@ -1089,11 +1122,15 @@ static int musb_gadget_enable(struct usb_ep *ep, /* Set TXMAXP with the FIFO size of the endpoint * to disable double buffering mode. */ - if (musb->double_buffer_not_ok) + if (musb->double_buffer_not_ok) { musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx); - else + } else { + if (can_bulk_split(musb, musb_ep->type)) + musb_ep->hb_mult = (hw_ep->max_packet_sz_tx / + musb_ep->packet_sz) - 1; musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11)); + } csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG; if (musb_readw(regs, MUSB_TXCSR) @@ -1108,7 +1145,6 @@ static int musb_gadget_enable(struct usb_ep *ep, musb_writew(regs, MUSB_TXCSR, csr); } else { - u16 int_rxe = musb_readw(mbase, MUSB_INTRRXE); if (hw_ep->is_shared_fifo) musb_ep->is_in = 0; @@ -1120,8 +1156,8 @@ static int musb_gadget_enable(struct usb_ep *ep, goto fail; } - int_rxe |= (1 << epnum); - musb_writew(mbase, MUSB_INTRRXE, int_rxe); + musb->intrrxe |= (1 << epnum); + musb_writew(mbase, MUSB_INTRRXE, musb->intrrxe); /* REVISIT if can_bulk_combine() use by updating "tmp" * likewise high bandwidth periodic rx @@ -1209,14 +1245,12 @@ static int musb_gadget_disable(struct usb_ep *ep) /* zero the endpoint sizes */ if (musb_ep->is_in) { - u16 int_txe = musb_readw(musb->mregs, MUSB_INTRTXE); - int_txe &= ~(1 << epnum); - musb_writew(musb->mregs, MUSB_INTRTXE, int_txe); + musb->intrtxe &= ~(1 << epnum); + musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe); musb_writew(epio, MUSB_TXMAXP, 0); } else { - u16 int_rxe = musb_readw(musb->mregs, MUSB_INTRRXE); - int_rxe &= ~(1 << epnum); - musb_writew(musb->mregs, MUSB_INTRRXE, int_rxe); + musb->intrrxe &= ~(1 << epnum); + musb_writew(musb->mregs, MUSB_INTRRXE, musb->intrrxe); musb_writew(epio, MUSB_RXMAXP, 0); } @@ -1532,7 +1566,7 @@ static void musb_gadget_fifo_flush(struct usb_ep *ep) void __iomem *epio = musb->endpoints[epnum].regs; void __iomem *mbase; unsigned long flags; - u16 csr, int_txe; + u16 csr; mbase = musb->mregs; @@ -1540,8 +1574,7 @@ static void musb_gadget_fifo_flush(struct usb_ep *ep) musb_ep_select(mbase, (u8) epnum); /* disable interrupts */ - int_txe = musb_readw(mbase, MUSB_INTRTXE); - musb_writew(mbase, MUSB_INTRTXE, int_txe & ~(1 << epnum)); + musb_writew(mbase, MUSB_INTRTXE, musb->intrtxe & ~(1 << epnum)); if (musb_ep->is_in) { csr = musb_readw(epio, MUSB_TXCSR); @@ -1565,7 +1598,7 @@ static void musb_gadget_fifo_flush(struct usb_ep *ep) } /* re-enable interrupt */ - musb_writew(mbase, MUSB_INTRTXE, int_txe); + musb_writew(mbase, MUSB_INTRTXE, musb->intrtxe); spin_unlock_irqrestore(&musb->lock, flags); } @@ -1770,7 +1803,7 @@ static void musb_gadget_release(struct device *dev) } -static void __devinit +static void init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in) { struct musb_hw_ep *hw_ep = musb->endpoints + epnum; @@ -1807,7 +1840,7 @@ init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in) * Initialize the endpoints exposed to peripheral drivers, with backlinks * to the rest of the driver state. */ -static inline void __devinit musb_g_init_endpoints(struct musb *musb) +static inline void musb_g_init_endpoints(struct musb *musb) { u8 epnum; struct musb_hw_ep *hw_ep; @@ -1840,7 +1873,7 @@ static inline void __devinit musb_g_init_endpoints(struct musb *musb) /* called once during driver setup to initialize and link into * the driver model; memory is zeroed. */ -int __devinit musb_gadget_setup(struct musb *musb) +int musb_gadget_setup(struct musb *musb) { int status; @@ -2154,10 +2187,9 @@ __acquires(musb->lock) u8 devctl = musb_readb(mbase, MUSB_DEVCTL); u8 power; - dev_dbg(musb->controller, "<== %s addr=%x driver '%s'\n", + dev_dbg(musb->controller, "<== %s driver '%s'\n", (devctl & MUSB_DEVCTL_BDEVICE) ? "B-Device" : "A-Device", - musb_readb(mbase, MUSB_FADDR), musb->gadget_driver ? musb->gadget_driver->driver.name : NULL diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c index e40d7647caf..c9c1ac4e075 100644 --- a/drivers/usb/musb/musb_gadget_ep0.c +++ b/drivers/usb/musb/musb_gadget_ep0.c @@ -673,10 +673,8 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb) csr = musb_readw(regs, MUSB_CSR0); len = musb_readb(regs, MUSB_COUNT0); - dev_dbg(musb->controller, "csr %04x, count %d, myaddr %d, ep0stage %s\n", - csr, len, - musb_readb(mbase, MUSB_FADDR), - decode_ep0stage(musb->ep0_state)); + dev_dbg(musb->controller, "csr %04x, count %d, ep0stage %s\n", + csr, len, decode_ep0stage(musb->ep0_state)); if (csr & MUSB_CSR0_P_DATAEND) { /* diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 3df6a76b851..1ce1fcf3f3e 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -634,7 +634,17 @@ static bool musb_tx_dma_program(struct dma_controller *dma, mode = 1; csr |= MUSB_TXCSR_DMAMODE | MUSB_TXCSR_DMAENAB; /* autoset shouldn't be set in high bandwidth */ - if (qh->hb_mult == 1) + /* + * Enable Autoset according to table + * below + * bulk_split hb_mult Autoset_Enable + * 0 1 Yes(Normal) + * 0 >1 No(High BW ISO) + * 1 1 Yes(HS bulk) + * 1 >1 Yes(FS bulk) + */ + if (qh->hb_mult == 1 || (qh->hb_mult > 1 && + can_bulk_split(hw_ep->musb, qh->type))) csr |= MUSB_TXCSR_AUTOSET; } else { mode = 0; @@ -740,13 +750,19 @@ static void musb_ep_program(struct musb *musb, u8 epnum, csr = musb_readw(epio, MUSB_TXCSR); /* disable interrupt in case we flush */ - int_txe = musb_readw(mbase, MUSB_INTRTXE); + int_txe = musb->intrtxe; musb_writew(mbase, MUSB_INTRTXE, int_txe & ~(1 << epnum)); /* general endpoint setup */ if (epnum) { /* flush all old state, set default */ - musb_h_tx_flush_fifo(hw_ep); + /* + * We could be flushing valid + * packets in double buffering + * case + */ + if (!hw_ep->tx_double_buffered) + musb_h_tx_flush_fifo(hw_ep); /* * We must not clear the DMAMODE bit before or in @@ -763,11 +779,13 @@ static void musb_ep_program(struct musb *musb, u8 epnum, ); csr |= MUSB_TXCSR_MODE; - if (usb_gettoggle(urb->dev, qh->epnum, 1)) - csr |= MUSB_TXCSR_H_WR_DATATOGGLE - | MUSB_TXCSR_H_DATATOGGLE; - else - csr |= MUSB_TXCSR_CLRDATATOG; + if (!hw_ep->tx_double_buffered) { + if (usb_gettoggle(urb->dev, qh->epnum, 1)) + csr |= MUSB_TXCSR_H_WR_DATATOGGLE + | MUSB_TXCSR_H_DATATOGGLE; + else + csr |= MUSB_TXCSR_CLRDATATOG; + } musb_writew(epio, MUSB_TXCSR, csr); /* REVISIT may need to clear FLUSHFIFO ... */ @@ -791,17 +809,19 @@ static void musb_ep_program(struct musb *musb, u8 epnum, /* protocol/endpoint/interval/NAKlimit */ if (epnum) { musb_writeb(epio, MUSB_TXTYPE, qh->type_reg); - if (musb->double_buffer_not_ok) + if (musb->double_buffer_not_ok) { musb_writew(epio, MUSB_TXMAXP, hw_ep->max_packet_sz_tx); - else if (can_bulk_split(musb, qh->type)) + } else if (can_bulk_split(musb, qh->type)) { + qh->hb_mult = hw_ep->max_packet_sz_tx + / packet_sz; musb_writew(epio, MUSB_TXMAXP, packet_sz - | ((hw_ep->max_packet_sz_tx / - packet_sz) - 1) << 11); - else + | ((qh->hb_mult) - 1) << 11); + } else { musb_writew(epio, MUSB_TXMAXP, qh->maxpacket | ((qh->hb_mult - 1) << 11)); + } musb_writeb(epio, MUSB_TXINTERVAL, qh->intv_reg); } else { musb_writeb(epio, MUSB_NAKLIMIT0, qh->intv_reg); diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h index 565ad161783..eebeed78edd 100644 --- a/drivers/usb/musb/musb_io.h +++ b/drivers/usb/musb/musb_io.h @@ -37,27 +37,6 @@ #include <linux/io.h> -#if !defined(CONFIG_ARM) && !defined(CONFIG_SUPERH) \ - && !defined(CONFIG_AVR32) && !defined(CONFIG_PPC32) \ - && !defined(CONFIG_PPC64) && !defined(CONFIG_BLACKFIN) \ - && !defined(CONFIG_MIPS) && !defined(CONFIG_M68K) \ - && !defined(CONFIG_XTENSA) -static inline void readsl(const void __iomem *addr, void *buf, int len) - { insl((unsigned long)addr, buf, len); } -static inline void readsw(const void __iomem *addr, void *buf, int len) - { insw((unsigned long)addr, buf, len); } -static inline void readsb(const void __iomem *addr, void *buf, int len) - { insb((unsigned long)addr, buf, len); } - -static inline void writesl(const void __iomem *addr, const void *buf, int len) - { outsl((unsigned long)addr, buf, len); } -static inline void writesw(const void __iomem *addr, const void *buf, int len) - { outsw((unsigned long)addr, buf, len); } -static inline void writesb(const void __iomem *addr, const void *buf, int len) - { outsb((unsigned long)addr, buf, len); } - -#endif - #ifndef CONFIG_BLACKFIN /* NOTE: these offsets are all in bytes */ diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 0fc6ca6bc60..3d1fd52a15a 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -380,8 +380,7 @@ void dma_controller_destroy(struct dma_controller *c) kfree(controller); } -struct dma_controller *__devinit -dma_controller_create(struct musb *musb, void __iomem *base) +struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *base) { struct musb_dma_controller *controller; struct device *dev = musb->controller; diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h index 320fd4afb93..f7b13fd2525 100644 --- a/drivers/usb/musb/musbhsdma.h +++ b/drivers/usb/musb/musbhsdma.h @@ -31,10 +31,6 @@ * */ -#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430) -#include "omap2430.h" -#endif - #ifndef CONFIG_BLACKFIN #define MUSB_HSDMA_BASE 0x200 diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index a538fe17a96..1a42a458f2c 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -37,6 +37,7 @@ #include <linux/err.h> #include <linux/delay.h> #include <linux/usb/musb-omap.h> +#include <linux/usb/omap_control_usb.h> #include "musb_core.h" #include "omap2430.h" @@ -46,34 +47,14 @@ struct omap2430_glue { struct platform_device *musb; enum omap_musb_vbus_id_status status; struct work_struct omap_musb_mailbox_work; - u32 __iomem *control_otghs; + struct device *control_otghs; }; #define glue_to_musb(g) platform_get_drvdata(g->musb) -struct omap2430_glue *_glue; +static struct omap2430_glue *_glue; static struct timer_list musb_idle_timer; -/** - * omap4_usb_phy_mailbox - write to usb otg mailbox - * @glue: struct omap2430_glue * - * @val: the value to be written to the mailbox - * - * On detection of a device (ID pin is grounded), this API should be called - * to set AVALID, VBUSVALID and ID pin is grounded. - * - * When OMAP is connected to a host (OMAP in device mode), this API - * is called to set AVALID, VBUSVALID and ID pin in high impedance. - * - * XXX: This function will be removed once we have a seperate driver for - * control module - */ -static void omap4_usb_phy_mailbox(struct omap2430_glue *glue, u32 val) -{ - if (glue->control_otghs) - writel(val, glue->control_otghs); -} - static void musb_do_idle(unsigned long _musb) { struct musb *musb = (void *)_musb; @@ -255,11 +236,15 @@ static inline void omap2430_low_level_init(struct musb *musb) void omap_musb_mailbox(enum omap_musb_vbus_id_status status) { struct omap2430_glue *glue = _glue; - struct musb *musb = glue_to_musb(glue); + if (!glue) { + pr_err("%s: musb core is not yet initialized\n", __func__); + return; + } glue->status = status; - if (!musb) { - dev_err(glue->dev, "musb core is not yet ready\n"); + + if (!glue_to_musb(glue)) { + pr_err("%s: musb core is not yet ready\n", __func__); return; } @@ -269,7 +254,6 @@ EXPORT_SYMBOL_GPL(omap_musb_mailbox); static void omap_musb_set_mailbox(struct omap2430_glue *glue) { - u32 val; struct musb *musb = glue_to_musb(glue); struct device *dev = musb->controller; struct musb_hdrc_platform_data *pdata = dev->platform_data; @@ -285,8 +269,8 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) musb->xceiv->last_event = USB_EVENT_ID; if (musb->gadget_driver) { pm_runtime_get_sync(dev); - val = AVALID | VBUSVALID; - omap4_usb_phy_mailbox(glue, val); + omap_control_usb_set_mode(glue->control_otghs, + USB_MODE_HOST); omap2430_musb_set_vbus(musb, 1); } break; @@ -299,8 +283,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) musb->xceiv->last_event = USB_EVENT_VBUS; if (musb->gadget_driver) pm_runtime_get_sync(dev); - val = IDDIG | AVALID | VBUSVALID; - omap4_usb_phy_mailbox(glue, val); + omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE); break; case OMAP_MUSB_ID_FLOAT: @@ -317,8 +300,8 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) if (musb->xceiv->otg->set_vbus) otg_set_vbus(musb->xceiv->otg, 0); } - val = SESSEND | IDDIG; - omap4_usb_phy_mailbox(glue, val); + omap_control_usb_set_mode(glue->control_otghs, + USB_MODE_DISCONNECT); break; default: dev_dbg(dev, "ID float\n"); @@ -333,6 +316,26 @@ static void omap_musb_mailbox_work(struct work_struct *mailbox_work) omap_musb_set_mailbox(glue); } +static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci) +{ + unsigned long flags; + irqreturn_t retval = IRQ_NONE; + struct musb *musb = __hci; + + spin_lock_irqsave(&musb->lock, flags); + + musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB); + musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX); + musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX); + + if (musb->int_usb || musb->int_tx || musb->int_rx) + retval = musb_interrupt(musb); + + spin_unlock_irqrestore(&musb->lock, flags); + + return retval; +} + static int omap2430_musb_init(struct musb *musb) { u32 l; @@ -346,12 +349,19 @@ static int omap2430_musb_init(struct musb *musb) * up through ULPI. TWL4030-family PMICs include one, * which needs a driver, drivers aren't always needed. */ - musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + if (dev->parent->of_node) + musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, + "usb-phy", 0); + else + musb->xceiv = devm_usb_get_phy_dev(dev, 0); + if (IS_ERR_OR_NULL(musb->xceiv)) { pr_err("HS USB OTG: no transceiver configured\n"); - return -ENODEV; + return -EPROBE_DEFER; } + musb->isr = omap2430_musb_interrupt; + status = pm_runtime_get_sync(dev); if (status < 0) { dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status); @@ -393,7 +403,6 @@ err1: static void omap2430_musb_enable(struct musb *musb) { u8 devctl; - u32 val; unsigned long timeout = jiffies + msecs_to_jiffies(1000); struct device *dev = musb->controller; struct omap2430_glue *glue = dev_get_drvdata(dev->parent); @@ -403,8 +412,7 @@ static void omap2430_musb_enable(struct musb *musb) switch (glue->status) { case OMAP_MUSB_ID_GROUND: - val = AVALID | VBUSVALID; - omap4_usb_phy_mailbox(glue, val); + omap_control_usb_set_mode(glue->control_otghs, USB_MODE_HOST); if (data->interface_type != MUSB_INTERFACE_UTMI) break; devctl = musb_readb(musb->mregs, MUSB_DEVCTL); @@ -423,8 +431,7 @@ static void omap2430_musb_enable(struct musb *musb) break; case OMAP_MUSB_VBUS_VALID: - val = IDDIG | AVALID | VBUSVALID; - omap4_usb_phy_mailbox(glue, val); + omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE); break; default: @@ -434,14 +441,12 @@ static void omap2430_musb_enable(struct musb *musb) static void omap2430_musb_disable(struct musb *musb) { - u32 val; struct device *dev = musb->controller; struct omap2430_glue *glue = dev_get_drvdata(dev->parent); - if (glue->status != OMAP_MUSB_UNKNOWN) { - val = SESSEND | IDDIG; - omap4_usb_phy_mailbox(glue, val); - } + if (glue->status != OMAP_MUSB_UNKNOWN) + omap_control_usb_set_mode(glue->control_otghs, + USB_MODE_DISCONNECT); } static int omap2430_musb_exit(struct musb *musb) @@ -468,7 +473,7 @@ static const struct musb_platform_ops omap2430_ops = { static u64 omap2430_dmamask = DMA_BIT_MASK(32); -static int __devinit omap2430_probe(struct platform_device *pdev) +static int omap2430_probe(struct platform_device *pdev) { struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data; struct omap_musb_board_data *data; @@ -476,9 +481,7 @@ static int __devinit omap2430_probe(struct platform_device *pdev) struct omap2430_glue *glue; struct device_node *np = pdev->dev.of_node; struct musb_hdrc_config *config; - struct resource *res; int ret = -ENOMEM; - int musbid; glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); if (!glue) { @@ -486,21 +489,12 @@ static int __devinit omap2430_probe(struct platform_device *pdev) goto err0; } - /* get the musb id */ - musbid = musb_get_id(&pdev->dev, GFP_KERNEL); - if (musbid < 0) { - dev_err(&pdev->dev, "failed to allocate musb id\n"); - ret = -ENOMEM; - goto err0; - } - - musb = platform_device_alloc("musb-hdrc", musbid); + musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err1; + goto err0; } - musb->id = musbid; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &omap2430_dmamask; musb->dev.coherent_dma_mask = omap2430_dmamask; @@ -509,34 +503,26 @@ static int __devinit omap2430_probe(struct platform_device *pdev) glue->musb = musb; glue->status = OMAP_MUSB_UNKNOWN; - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - - glue->control_otghs = devm_request_and_ioremap(&pdev->dev, res); - if (glue->control_otghs == NULL) - dev_dbg(&pdev->dev, "Failed to obtain control memory\n"); - if (np) { pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) { dev_err(&pdev->dev, "failed to allocate musb platfrom data\n"); - ret = -ENOMEM; - goto err1; + goto err2; } data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); if (!data) { dev_err(&pdev->dev, - "failed to allocate musb board data\n"); - ret = -ENOMEM; - goto err1; + "failed to allocate musb board data\n"); + goto err2; } config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL); - if (!data) { + if (!config) { dev_err(&pdev->dev, "failed to allocate musb hdrc config\n"); - goto err1; + goto err2; } of_property_read_u32(np, "mode", (u32 *)&pdata->mode); @@ -546,11 +532,22 @@ static int __devinit omap2430_probe(struct platform_device *pdev) of_property_read_u32(np, "ram_bits", (u32 *)&config->ram_bits); of_property_read_u32(np, "power", (u32 *)&pdata->power); config->multipoint = of_property_read_bool(np, "multipoint"); + pdata->has_mailbox = of_property_read_bool(np, + "ti,has-mailbox"); pdata->board_data = data; pdata->config = config; } + if (pdata->has_mailbox) { + glue->control_otghs = omap_get_control_dev(); + if (IS_ERR(glue->control_otghs)) { + dev_vdbg(&pdev->dev, "Failed to get control device\n"); + return -ENODEV; + } + } else { + glue->control_otghs = ERR_PTR(-ENODEV); + } pdata->platform_ops = &omap2430_ops; platform_set_drvdata(pdev, glue); @@ -589,19 +586,15 @@ static int __devinit omap2430_probe(struct platform_device *pdev) err2: platform_device_put(musb); -err1: - musb_put_id(&pdev->dev, musbid); - err0: return ret; } -static int __devexit omap2430_remove(struct platform_device *pdev) +static int omap2430_remove(struct platform_device *pdev) { struct omap2430_glue *glue = platform_get_drvdata(pdev); cancel_work_sync(&glue->omap_musb_mailbox_work); - musb_put_id(&pdev->dev, glue->musb->id); platform_device_unregister(glue->musb); return 0; @@ -666,7 +659,7 @@ MODULE_DEVICE_TABLE(of, omap2430_id_table); static struct platform_driver omap2430_driver = { .probe = omap2430_probe, - .remove = __devexit_p(omap2430_remove), + .remove = omap2430_remove, .driver = { .name = "musb-omap2430", .pm = DEV_PM_OPS, diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h index b85f3973e78..1b5e83a9840 100644 --- a/drivers/usb/musb/omap2430.h +++ b/drivers/usb/musb/omap2430.h @@ -10,7 +10,7 @@ #ifndef __MUSB_OMAP243X_H__ #define __MUSB_OMAP243X_H__ -#include <plat/usb.h> +#include <linux/platform_data/usb-omap.h> /* * OMAP2430-specific definitions @@ -49,13 +49,4 @@ #define OTG_FORCESTDBY 0x414 # define ENABLEFORCE (1 << 0) -/* - * Control Module bit definitions - * XXX: Will be removed once we have a driver for control module. - */ -#define AVALID BIT(0) -#define BVALID BIT(1) -#define VBUSVALID BIT(2) -#define SESSEND BIT(3) -#define IDDIG BIT(4) #endif /* __MUSB_OMAP243X_H__ */ diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index dc4d75ea13a..464bd23cccd 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -22,6 +22,7 @@ #include <linux/prefetch.h> #include <linux/usb.h> #include <linux/irq.h> +#include <linux/io.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/usb/nop-usb-xceiv.h> @@ -198,7 +199,7 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf) /* Best case is 32bit-aligned destination address */ if ((0x02 & (unsigned long) buf) == 0) { if (len >= 4) { - writesl(fifo, buf, len >> 2); + iowrite32_rep(fifo, buf, len >> 2); buf += (len & ~0x03); len &= 0x03; } @@ -245,7 +246,7 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf) /* Best case is 32bit-aligned destination address */ if ((0x02 & (unsigned long) buf) == 0) { if (len >= 4) { - readsl(fifo, buf, len >> 2); + ioread32_rep(fifo, buf, len >> 2); buf += (len & ~0x03); len &= 0x03; } @@ -1068,7 +1069,7 @@ static int tusb_musb_init(struct musb *musb) usb_nop_xceiv_register(); musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(musb->xceiv)) - return -ENODEV; + return -EPROBE_DEFER; pdev = to_platform_device(musb->controller); @@ -1153,14 +1154,13 @@ static const struct musb_platform_ops tusb_ops = { static u64 tusb_dmamask = DMA_BIT_MASK(32); -static int __devinit tusb_probe(struct platform_device *pdev) +static int tusb_probe(struct platform_device *pdev) { struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data; struct platform_device *musb; struct tusb6010_glue *glue; int ret = -ENOMEM; - int musbid; glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { @@ -1168,21 +1168,12 @@ static int __devinit tusb_probe(struct platform_device *pdev) goto err0; } - /* get the musb id */ - musbid = musb_get_id(&pdev->dev, GFP_KERNEL); - if (musbid < 0) { - dev_err(&pdev->dev, "failed to allocate musb id\n"); - ret = -ENOMEM; - goto err1; - } - - musb = platform_device_alloc("musb-hdrc", musbid); + musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err2; + goto err1; } - musb->id = musbid; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &tusb_dmamask; musb->dev.coherent_dma_mask = tusb_dmamask; @@ -1218,9 +1209,6 @@ static int __devinit tusb_probe(struct platform_device *pdev) err3: platform_device_put(musb); -err2: - musb_put_id(&pdev->dev, musbid); - err1: kfree(glue); @@ -1228,13 +1216,11 @@ err0: return ret; } -static int __devexit tusb_remove(struct platform_device *pdev) +static int tusb_remove(struct platform_device *pdev) { struct tusb6010_glue *glue = platform_get_drvdata(pdev); - musb_put_id(&pdev->dev, glue->musb->id); - platform_device_del(glue->musb); - platform_device_put(glue->musb); + platform_device_unregister(glue->musb); kfree(glue); return 0; @@ -1242,7 +1228,7 @@ static int __devexit tusb_remove(struct platform_device *pdev) static struct platform_driver tusb_driver = { .probe = tusb_probe, - .remove = __devexit_p(tusb_remove), + .remove = tusb_remove, .driver = { .name = "musb-tusb", }, @@ -1251,15 +1237,4 @@ static struct platform_driver tusb_driver = { MODULE_DESCRIPTION("TUSB6010 MUSB Glue Layer"); MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); MODULE_LICENSE("GPL v2"); - -static int __init tusb_init(void) -{ - return platform_driver_register(&tusb_driver); -} -module_init(tusb_init); - -static void __exit tusb_exit(void) -{ - platform_driver_unregister(&tusb_driver); -} -module_exit(tusb_exit); +module_platform_driver(tusb_driver); diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index 7a62b95dac2..98df17c984a 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -16,7 +16,7 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/slab.h> -#include <plat/dma.h> +#include <linux/omap-dma.h> #include "musb_core.h" #include "tusb6010.h" @@ -25,6 +25,13 @@ #define MAX_DMAREQ 5 /* REVISIT: Really 6, but req5 not OK */ +#define OMAP24XX_DMA_EXT_DMAREQ0 2 +#define OMAP24XX_DMA_EXT_DMAREQ1 3 +#define OMAP242X_DMA_EXT_DMAREQ2 14 +#define OMAP242X_DMA_EXT_DMAREQ3 15 +#define OMAP242X_DMA_EXT_DMAREQ4 16 +#define OMAP242X_DMA_EXT_DMAREQ5 64 + struct tusb_omap_dma_ch { struct musb *musb; void __iomem *tbase; @@ -661,8 +668,7 @@ void dma_controller_destroy(struct dma_controller *c) kfree(tusb_dma); } -struct dma_controller *__devinit -dma_controller_create(struct musb *musb, void __iomem *base) +struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *base) { void __iomem *tbase = musb->ctrl_base; struct tusb_omap_dma *tusb_dma; diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index d62a91fedc2..13a39291376 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -36,14 +36,36 @@ struct ux500_glue { }; #define glue_to_musb(g) platform_get_drvdata(g->musb) +static irqreturn_t ux500_musb_interrupt(int irq, void *__hci) +{ + unsigned long flags; + irqreturn_t retval = IRQ_NONE; + struct musb *musb = __hci; + + spin_lock_irqsave(&musb->lock, flags); + + musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB); + musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX); + musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX); + + if (musb->int_usb || musb->int_tx || musb->int_rx) + retval = musb_interrupt(musb); + + spin_unlock_irqrestore(&musb->lock, flags); + + return retval; +} + static int ux500_musb_init(struct musb *musb) { musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(musb->xceiv)) { pr_err("HS USB OTG: no transceiver configured\n"); - return -ENODEV; + return -EPROBE_DEFER; } + musb->isr = ux500_musb_interrupt; + return 0; } @@ -59,13 +81,12 @@ static const struct musb_platform_ops ux500_ops = { .exit = ux500_musb_exit, }; -static int __devinit ux500_probe(struct platform_device *pdev) +static int ux500_probe(struct platform_device *pdev) { struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data; struct platform_device *musb; struct ux500_glue *glue; struct clk *clk; - int ret = -ENOMEM; glue = kzalloc(sizeof(*glue), GFP_KERNEL); @@ -74,18 +95,10 @@ static int __devinit ux500_probe(struct platform_device *pdev) goto err0; } - /* get the musb id */ - musbid = musb_get_id(&pdev->dev, GFP_KERNEL); - if (musbid < 0) { - dev_err(&pdev->dev, "failed to allocate musb id\n"); - ret = -ENOMEM; - goto err1; - } - - musb = platform_device_alloc("musb-hdrc", musbid); + musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err2; + goto err1; } clk = clk_get(&pdev->dev, "usb"); @@ -95,13 +108,12 @@ static int __devinit ux500_probe(struct platform_device *pdev) goto err3; } - ret = clk_enable(clk); + ret = clk_prepare_enable(clk); if (ret) { dev_err(&pdev->dev, "failed to enable clock\n"); goto err4; } - musb->id = musbid; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = pdev->dev.dma_mask; musb->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask; @@ -136,7 +148,7 @@ static int __devinit ux500_probe(struct platform_device *pdev) return 0; err5: - clk_disable(clk); + clk_disable_unprepare(clk); err4: clk_put(clk); @@ -144,9 +156,6 @@ err4: err3: platform_device_put(musb); -err2: - musb_put_id(&pdev->dev, musbid); - err1: kfree(glue); @@ -154,14 +163,12 @@ err0: return ret; } -static int __devexit ux500_remove(struct platform_device *pdev) +static int ux500_remove(struct platform_device *pdev) { struct ux500_glue *glue = platform_get_drvdata(pdev); - musb_put_id(&pdev->dev, glue->musb->id); - platform_device_del(glue->musb); - platform_device_put(glue->musb); - clk_disable(glue->clk); + platform_device_unregister(glue->musb); + clk_disable_unprepare(glue->clk); clk_put(glue->clk); kfree(glue); @@ -175,7 +182,7 @@ static int ux500_suspend(struct device *dev) struct musb *musb = glue_to_musb(glue); usb_phy_set_suspend(musb->xceiv, 1); - clk_disable(glue->clk); + clk_disable_unprepare(glue->clk); return 0; } @@ -186,7 +193,7 @@ static int ux500_resume(struct device *dev) struct musb *musb = glue_to_musb(glue); int ret; - ret = clk_enable(glue->clk); + ret = clk_prepare_enable(glue->clk); if (ret) { dev_err(dev, "failed to enable clock\n"); return ret; @@ -209,7 +216,7 @@ static const struct dev_pm_ops ux500_pm_ops = { static struct platform_driver ux500_driver = { .probe = ux500_probe, - .remove = __devexit_p(ux500_remove), + .remove = ux500_remove, .driver = { .name = "musb-ux500", .pm = DEV_PM_OPS, @@ -219,15 +226,4 @@ static struct platform_driver ux500_driver = { MODULE_DESCRIPTION("UX500 MUSB Glue Layer"); MODULE_AUTHOR("Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>"); MODULE_LICENSE("GPL v2"); - -static int __init ux500_init(void) -{ - return platform_driver_register(&ux500_driver); -} -module_init(ux500_init); - -static void __exit ux500_exit(void) -{ - platform_driver_unregister(&ux500_driver); -} -module_exit(ux500_exit); +module_platform_driver(ux500_driver); diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index f1059e725ea..039e567dd3b 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -364,8 +364,7 @@ void dma_controller_destroy(struct dma_controller *c) kfree(controller); } -struct dma_controller *__devinit -dma_controller_create(struct musb *musb, void __iomem *base) +struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *base) { struct ux500_dma_controller *controller; struct platform_device *pdev = to_platform_device(musb->controller); diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index d8c8a42bff3..37962c99ff1 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -58,7 +58,7 @@ config USB_ULPI_VIEWPORT config TWL4030_USB tristate "TWL4030 USB Transceiver Driver" - depends on TWL4030_CORE && REGULATOR_TWL4030 + depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS select USB_OTG_UTILS help Enable this to support the USB OTG transceiver on TWL4030 @@ -68,7 +68,7 @@ config TWL4030_USB config TWL6030_USB tristate "TWL6030 USB Transceiver Driver" - depends on TWL4030_CORE && OMAP_USB2 + depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS select USB_OTG_UTILS help Enable this to support the USB OTG transceiver on TWL6030 @@ -110,7 +110,7 @@ config AB8500_USB config FSL_USB2_OTG bool "Freescale USB OTG Transceiver Driver" - depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2 && USB_SUSPEND + depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND select USB_OTG select USB_OTG_UTILS help diff --git a/drivers/usb/otg/ab8500-usb.c b/drivers/usb/otg/ab8500-usb.c index ae8ad561f08..2d86f26a018 100644 --- a/drivers/usb/otg/ab8500-usb.c +++ b/drivers/usb/otg/ab8500-usb.c @@ -468,7 +468,7 @@ static int ab8500_usb_v2_res_setup(struct platform_device *pdev, return 0; } -static int __devinit ab8500_usb_probe(struct platform_device *pdev) +static int ab8500_usb_probe(struct platform_device *pdev) { struct ab8500_usb *ab; struct usb_otg *otg; @@ -546,7 +546,7 @@ fail0: return err; } -static int __devexit ab8500_usb_remove(struct platform_device *pdev) +static int ab8500_usb_remove(struct platform_device *pdev) { struct ab8500_usb *ab = platform_get_drvdata(pdev); @@ -571,7 +571,7 @@ static int __devexit ab8500_usb_remove(struct platform_device *pdev) static struct platform_driver ab8500_usb_driver = { .probe = ab8500_usb_probe, - .remove = __devexit_p(ab8500_usb_remove), + .remove = ab8500_usb_remove, .driver = { .name = "ab8500-usb", .owner = THIS_MODULE, diff --git a/drivers/usb/otg/fsl_otg.c b/drivers/usb/otg/fsl_otg.c index c19d1d7173a..d16adb41eb2 100644 --- a/drivers/usb/otg/fsl_otg.c +++ b/drivers/usb/otg/fsl_otg.c @@ -1110,7 +1110,7 @@ static const struct file_operations otg_fops = { .release = fsl_otg_release, }; -static int __devinit fsl_otg_probe(struct platform_device *pdev) +static int fsl_otg_probe(struct platform_device *pdev) { int ret; @@ -1144,7 +1144,7 @@ static int __devinit fsl_otg_probe(struct platform_device *pdev) return ret; } -static int __devexit fsl_otg_remove(struct platform_device *pdev) +static int fsl_otg_remove(struct platform_device *pdev) { struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; @@ -1169,7 +1169,7 @@ static int __devexit fsl_otg_remove(struct platform_device *pdev) struct platform_driver fsl_otg_driver = { .probe = fsl_otg_probe, - .remove = __devexit_p(fsl_otg_remove), + .remove = fsl_otg_remove, .driver = { .name = driver_name, .owner = THIS_MODULE, diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/otg/gpio_vbus.c index a67ffe22179..a7d4ac59198 100644 --- a/drivers/usb/otg/gpio_vbus.c +++ b/drivers/usb/otg/gpio_vbus.c @@ -409,17 +409,7 @@ static struct platform_driver gpio_vbus_driver = { .remove = __exit_p(gpio_vbus_remove), }; -static int __init gpio_vbus_init(void) -{ - return platform_driver_probe(&gpio_vbus_driver, gpio_vbus_probe); -} -module_init(gpio_vbus_init); - -static void __exit gpio_vbus_exit(void) -{ - platform_driver_unregister(&gpio_vbus_driver); -} -module_exit(gpio_vbus_exit); +module_platform_driver_probe(gpio_vbus_driver, gpio_vbus_probe); MODULE_DESCRIPTION("simple GPIO controlled OTG transceiver driver"); MODULE_AUTHOR("Philipp Zabel"); diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c index ceee2119bff..af9cb11626b 100644 --- a/drivers/usb/otg/isp1301_omap.c +++ b/drivers/usb/otg/isp1301_omap.c @@ -1493,7 +1493,7 @@ isp1301_start_hnp(struct usb_otg *otg) /*-------------------------------------------------------------------------*/ -static int __devinit +static int isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { int status; diff --git a/drivers/usb/otg/msm_otg.c b/drivers/usb/otg/msm_otg.c index 9f5fc906041..749fbf41fb6 100644 --- a/drivers/usb/otg/msm_otg.c +++ b/drivers/usb/otg/msm_otg.c @@ -1606,7 +1606,7 @@ free_motg: return ret; } -static int __devexit msm_otg_remove(struct platform_device *pdev) +static int msm_otg_remove(struct platform_device *pdev) { struct msm_otg *motg = platform_get_drvdata(pdev); struct usb_phy *phy = &motg->phy; @@ -1746,7 +1746,7 @@ static const struct dev_pm_ops msm_otg_dev_pm_ops = { #endif static struct platform_driver msm_otg_driver = { - .remove = __devexit_p(msm_otg_remove), + .remove = msm_otg_remove, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, @@ -1756,18 +1756,7 @@ static struct platform_driver msm_otg_driver = { }, }; -static int __init msm_otg_init(void) -{ - return platform_driver_probe(&msm_otg_driver, msm_otg_probe); -} - -static void __exit msm_otg_exit(void) -{ - platform_driver_unregister(&msm_otg_driver); -} - -module_init(msm_otg_init); -module_exit(msm_otg_exit); +module_platform_driver_probe(msm_otg_driver, msm_otg_probe); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("MSM USB transceiver driver"); diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/otg/mv_otg.c index 3f124e8f579..b6a9be31133 100644 --- a/drivers/usb/otg/mv_otg.c +++ b/drivers/usb/otg/mv_otg.c @@ -240,7 +240,7 @@ static void otg_clock_enable(struct mv_otg *mvotg) unsigned int i; for (i = 0; i < mvotg->clknum; i++) - clk_enable(mvotg->clk[i]); + clk_prepare_enable(mvotg->clk[i]); } static void otg_clock_disable(struct mv_otg *mvotg) @@ -248,7 +248,7 @@ static void otg_clock_disable(struct mv_otg *mvotg) unsigned int i; for (i = 0; i < mvotg->clknum; i++) - clk_disable(mvotg->clk[i]); + clk_disable_unprepare(mvotg->clk[i]); } static int mv_otg_enable_internal(struct mv_otg *mvotg) @@ -420,7 +420,7 @@ static void mv_otg_work(struct work_struct *work) struct usb_otg *otg; int old_state; - mvotg = container_of((struct delayed_work *)work, struct mv_otg, work); + mvotg = container_of(to_delayed_work(work), struct mv_otg, work); run: /* work queue is single thread, or we need spin_lock to protect */ @@ -662,18 +662,9 @@ static struct attribute_group inputs_attr_group = { int mv_otg_remove(struct platform_device *pdev) { struct mv_otg *mvotg = platform_get_drvdata(pdev); - int clk_i; sysfs_remove_group(&mvotg->pdev->dev.kobj, &inputs_attr_group); - if (mvotg->irq) - free_irq(mvotg->irq, mvotg); - - if (mvotg->pdata->vbus) - free_irq(mvotg->pdata->vbus->irq, mvotg); - if (mvotg->pdata->id) - free_irq(mvotg->pdata->id->irq, mvotg); - if (mvotg->qwork) { flush_workqueue(mvotg->qwork); destroy_workqueue(mvotg->qwork); @@ -681,21 +672,9 @@ int mv_otg_remove(struct platform_device *pdev) mv_otg_disable(mvotg); - if (mvotg->cap_regs) - iounmap(mvotg->cap_regs); - - if (mvotg->phy_regs) - iounmap(mvotg->phy_regs); - - for (clk_i = 0; clk_i <= mvotg->clknum; clk_i++) - clk_put(mvotg->clk[clk_i]); - usb_remove_phy(&mvotg->phy); platform_set_drvdata(pdev, NULL); - kfree(mvotg->phy.otg); - kfree(mvotg); - return 0; } @@ -714,17 +693,15 @@ static int mv_otg_probe(struct platform_device *pdev) } size = sizeof(*mvotg) + sizeof(struct clk *) * pdata->clknum; - mvotg = kzalloc(size, GFP_KERNEL); + mvotg = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); if (!mvotg) { dev_err(&pdev->dev, "failed to allocate memory!\n"); return -ENOMEM; } - otg = kzalloc(sizeof *otg, GFP_KERNEL); - if (!otg) { - kfree(mvotg); + otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); + if (!otg) return -ENOMEM; - } platform_set_drvdata(pdev, mvotg); @@ -733,18 +710,18 @@ static int mv_otg_probe(struct platform_device *pdev) mvotg->clknum = pdata->clknum; for (clk_i = 0; clk_i < mvotg->clknum; clk_i++) { - mvotg->clk[clk_i] = clk_get(&pdev->dev, pdata->clkname[clk_i]); + mvotg->clk[clk_i] = devm_clk_get(&pdev->dev, + pdata->clkname[clk_i]); if (IS_ERR(mvotg->clk[clk_i])) { retval = PTR_ERR(mvotg->clk[clk_i]); - goto err_put_clk; + return retval; } } mvotg->qwork = create_singlethread_workqueue("mv_otg_queue"); if (!mvotg->qwork) { dev_dbg(&pdev->dev, "cannot create workqueue for OTG\n"); - retval = -ENOMEM; - goto err_put_clk; + return -ENOMEM; } INIT_DELAYED_WORK(&mvotg->work, mv_otg_work); @@ -772,7 +749,7 @@ static int mv_otg_probe(struct platform_device *pdev) goto err_destroy_workqueue; } - mvotg->phy_regs = ioremap(r->start, resource_size(r)); + mvotg->phy_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r)); if (mvotg->phy_regs == NULL) { dev_err(&pdev->dev, "failed to map phy I/O memory\n"); retval = -EFAULT; @@ -784,21 +761,21 @@ static int mv_otg_probe(struct platform_device *pdev) if (r == NULL) { dev_err(&pdev->dev, "no I/O memory resource defined\n"); retval = -ENODEV; - goto err_unmap_phyreg; + goto err_destroy_workqueue; } - mvotg->cap_regs = ioremap(r->start, resource_size(r)); + mvotg->cap_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r)); if (mvotg->cap_regs == NULL) { dev_err(&pdev->dev, "failed to map I/O memory\n"); retval = -EFAULT; - goto err_unmap_phyreg; + goto err_destroy_workqueue; } /* we will acces controller register, so enable the udc controller */ retval = mv_otg_enable_internal(mvotg); if (retval) { dev_err(&pdev->dev, "mv otg enable error %d\n", retval); - goto err_unmap_capreg; + goto err_destroy_workqueue; } mvotg->op_regs = @@ -806,9 +783,9 @@ static int mv_otg_probe(struct platform_device *pdev) + (readl(mvotg->cap_regs) & CAPLENGTH_MASK)); if (pdata->id) { - retval = request_threaded_irq(pdata->id->irq, NULL, - mv_otg_inputs_irq, - IRQF_ONESHOT, "id", mvotg); + retval = devm_request_threaded_irq(&pdev->dev, pdata->id->irq, + NULL, mv_otg_inputs_irq, + IRQF_ONESHOT, "id", mvotg); if (retval) { dev_info(&pdev->dev, "Failed to request irq for ID\n"); @@ -818,9 +795,9 @@ static int mv_otg_probe(struct platform_device *pdev) if (pdata->vbus) { mvotg->clock_gating = 1; - retval = request_threaded_irq(pdata->vbus->irq, NULL, - mv_otg_inputs_irq, - IRQF_ONESHOT, "vbus", mvotg); + retval = devm_request_threaded_irq(&pdev->dev, pdata->vbus->irq, + NULL, mv_otg_inputs_irq, + IRQF_ONESHOT, "vbus", mvotg); if (retval) { dev_info(&pdev->dev, "Failed to request irq for VBUS, " @@ -844,7 +821,7 @@ static int mv_otg_probe(struct platform_device *pdev) } mvotg->irq = r->start; - if (request_irq(mvotg->irq, mv_otg_irq, IRQF_SHARED, + if (devm_request_irq(&pdev->dev, mvotg->irq, mv_otg_irq, IRQF_SHARED, driver_name, mvotg)) { dev_err(&pdev->dev, "Request irq %d for OTG failed\n", mvotg->irq); @@ -857,14 +834,14 @@ static int mv_otg_probe(struct platform_device *pdev) if (retval < 0) { dev_err(&pdev->dev, "can't register transceiver, %d\n", retval); - goto err_free_irq; + goto err_disable_clk; } retval = sysfs_create_group(&pdev->dev.kobj, &inputs_attr_group); if (retval < 0) { dev_dbg(&pdev->dev, "Can't register sysfs attr group: %d\n", retval); - goto err_set_transceiver; + goto err_remove_phy; } spin_lock_init(&mvotg->wq_lock); @@ -879,30 +856,15 @@ static int mv_otg_probe(struct platform_device *pdev) return 0; -err_set_transceiver: +err_remove_phy: usb_remove_phy(&mvotg->phy); -err_free_irq: - free_irq(mvotg->irq, mvotg); err_disable_clk: - if (pdata->vbus) - free_irq(pdata->vbus->irq, mvotg); - if (pdata->id) - free_irq(pdata->id->irq, mvotg); mv_otg_disable_internal(mvotg); -err_unmap_capreg: - iounmap(mvotg->cap_regs); -err_unmap_phyreg: - iounmap(mvotg->phy_regs); err_destroy_workqueue: flush_workqueue(mvotg->qwork); destroy_workqueue(mvotg->qwork); -err_put_clk: - for (clk_i--; clk_i >= 0; clk_i--) - clk_put(mvotg->clk[clk_i]); platform_set_drvdata(pdev, NULL); - kfree(otg); - kfree(mvotg); return retval; } @@ -958,16 +920,4 @@ static struct platform_driver mv_otg_driver = { .resume = mv_otg_resume, #endif }; - -static int __init mv_otg_init(void) -{ - return platform_driver_register(&mv_otg_driver); -} - -static void __exit mv_otg_exit(void) -{ - platform_driver_unregister(&mv_otg_driver); -} - -module_init(mv_otg_init); -module_exit(mv_otg_exit); +module_platform_driver(mv_otg_driver); diff --git a/drivers/usb/otg/mxs-phy.c b/drivers/usb/otg/mxs-phy.c index 88db976647c..b0d9f119c74 100644 --- a/drivers/usb/otg/mxs-phy.c +++ b/drivers/usb/otg/mxs-phy.c @@ -20,7 +20,6 @@ #include <linux/delay.h> #include <linux/err.h> #include <linux/io.h> -#include <linux/workqueue.h> #define DRIVER_NAME "mxs_phy" @@ -35,16 +34,9 @@ #define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14) #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1) -/* - * Amount of delay in miliseconds to safely enable ENHOSTDISCONDETECT bit - * so that connection and reset processing can be completed for the root hub. - */ -#define MXY_PHY_ENHOSTDISCONDETECT_DELAY 250 - struct mxs_phy { struct usb_phy phy; struct clk *clk; - struct delayed_work enhostdiscondetect_work; }; #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) @@ -70,7 +62,6 @@ static int mxs_phy_init(struct usb_phy *phy) clk_prepare_enable(mxs_phy->clk); mxs_phy_hw_init(mxs_phy); - INIT_DELAYED_WORK(&mxs_phy->enhostdiscondetect_work, NULL); return 0; } @@ -85,46 +76,47 @@ static void mxs_phy_shutdown(struct usb_phy *phy) clk_disable_unprepare(mxs_phy->clk); } -static void mxs_phy_enhostdiscondetect_delay(struct work_struct *ws) +static int mxs_phy_suspend(struct usb_phy *x, int suspend) { - struct mxs_phy *mxs_phy = container_of(ws, struct mxs_phy, - enhostdiscondetect_work.work); + struct mxs_phy *mxs_phy = to_mxs_phy(x); + + if (suspend) { + writel_relaxed(0xffffffff, x->io_priv + HW_USBPHY_PWD); + writel_relaxed(BM_USBPHY_CTRL_CLKGATE, + x->io_priv + HW_USBPHY_CTRL_SET); + clk_disable_unprepare(mxs_phy->clk); + } else { + clk_prepare_enable(mxs_phy->clk); + writel_relaxed(BM_USBPHY_CTRL_CLKGATE, + x->io_priv + HW_USBPHY_CTRL_CLR); + writel_relaxed(0, x->io_priv + HW_USBPHY_PWD); + } - /* Enable HOSTDISCONDETECT after delay. */ - dev_dbg(mxs_phy->phy.dev, "Setting ENHOSTDISCONDETECT\n"); - writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, - mxs_phy->phy.io_priv + HW_USBPHY_CTRL_SET); + return 0; } -static int mxs_phy_on_connect(struct usb_phy *phy, int port) +static int mxs_phy_on_connect(struct usb_phy *phy, + enum usb_device_speed speed) { - struct mxs_phy *mxs_phy = to_mxs_phy(phy); - - dev_dbg(phy->dev, "Connect on port %d\n", port); - - mxs_phy_hw_init(mxs_phy); + dev_dbg(phy->dev, "%s speed device has connected\n", + (speed == USB_SPEED_HIGH) ? "high" : "non-high"); - /* - * Delay enabling ENHOSTDISCONDETECT so that connection and - * reset processing can be completed for the root hub. - */ - dev_dbg(phy->dev, "Delaying setting ENHOSTDISCONDETECT\n"); - PREPARE_DELAYED_WORK(&mxs_phy->enhostdiscondetect_work, - mxs_phy_enhostdiscondetect_delay); - schedule_delayed_work(&mxs_phy->enhostdiscondetect_work, - msecs_to_jiffies(MXY_PHY_ENHOSTDISCONDETECT_DELAY)); + if (speed == USB_SPEED_HIGH) + writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, + phy->io_priv + HW_USBPHY_CTRL_SET); return 0; } -static int mxs_phy_on_disconnect(struct usb_phy *phy, int port) +static int mxs_phy_on_disconnect(struct usb_phy *phy, + enum usb_device_speed speed) { - dev_dbg(phy->dev, "Disconnect on port %d\n", port); + dev_dbg(phy->dev, "%s speed device has disconnected\n", + (speed == USB_SPEED_HIGH) ? "high" : "non-high"); - /* No need to delay before clearing ENHOSTDISCONDETECT. */ - dev_dbg(phy->dev, "Clearing ENHOSTDISCONDETECT\n"); - writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, - phy->io_priv + HW_USBPHY_CTRL_CLR); + if (speed == USB_SPEED_HIGH) + writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, + phy->io_priv + HW_USBPHY_CTRL_CLR); return 0; } @@ -142,9 +134,9 @@ static int mxs_phy_probe(struct platform_device *pdev) return -ENOENT; } - base = devm_request_and_ioremap(&pdev->dev, res); - if (!base) - return -EBUSY; + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) { @@ -164,6 +156,7 @@ static int mxs_phy_probe(struct platform_device *pdev) mxs_phy->phy.label = DRIVER_NAME; mxs_phy->phy.init = mxs_phy_init; mxs_phy->phy.shutdown = mxs_phy_shutdown; + mxs_phy->phy.set_suspend = mxs_phy_suspend; mxs_phy->phy.notify_connect = mxs_phy_on_connect; mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect; @@ -176,7 +169,7 @@ static int mxs_phy_probe(struct platform_device *pdev) return 0; } -static int __devexit mxs_phy_remove(struct platform_device *pdev) +static int mxs_phy_remove(struct platform_device *pdev) { platform_set_drvdata(pdev, NULL); @@ -191,7 +184,7 @@ MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); static struct platform_driver mxs_phy_driver = { .probe = mxs_phy_probe, - .remove = __devexit_p(mxs_phy_remove), + .remove = mxs_phy_remove, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c index e52e35e7ada..a3ce24b94a7 100644 --- a/drivers/usb/otg/nop-usb-xceiv.c +++ b/drivers/usb/otg/nop-usb-xceiv.c @@ -93,7 +93,7 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host) return 0; } -static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev) +static int nop_usb_xceiv_probe(struct platform_device *pdev) { struct nop_usb_xceiv_platform_data *pdata = pdev->dev.platform_data; struct nop_usb_xceiv *nop; @@ -141,7 +141,7 @@ exit: return err; } -static int __devexit nop_usb_xceiv_remove(struct platform_device *pdev) +static int nop_usb_xceiv_remove(struct platform_device *pdev) { struct nop_usb_xceiv *nop = platform_get_drvdata(pdev); @@ -156,7 +156,7 @@ static int __devexit nop_usb_xceiv_remove(struct platform_device *pdev) static struct platform_driver nop_usb_xceiv_driver = { .probe = nop_usb_xceiv_probe, - .remove = __devexit_p(nop_usb_xceiv_remove), + .remove = nop_usb_xceiv_remove, .driver = { .name = "nop_usb_xceiv", .owner = THIS_MODULE, diff --git a/drivers/usb/otg/otg.c b/drivers/usb/otg/otg.c index a30c0411511..2bd03d261a5 100644 --- a/drivers/usb/otg/otg.c +++ b/drivers/usb/otg/otg.c @@ -13,11 +13,14 @@ #include <linux/export.h> #include <linux/err.h> #include <linux/device.h> +#include <linux/module.h> #include <linux/slab.h> +#include <linux/of.h> #include <linux/usb/otg.h> static LIST_HEAD(phy_list); +static LIST_HEAD(phy_bind_list); static DEFINE_SPINLOCK(phy_lock); static struct usb_phy *__usb_find_phy(struct list_head *list, @@ -35,6 +38,38 @@ static struct usb_phy *__usb_find_phy(struct list_head *list, return ERR_PTR(-ENODEV); } +static struct usb_phy *__usb_find_phy_dev(struct device *dev, + struct list_head *list, u8 index) +{ + struct usb_phy_bind *phy_bind = NULL; + + list_for_each_entry(phy_bind, list, list) { + if (!(strcmp(phy_bind->dev_name, dev_name(dev))) && + phy_bind->index == index) { + if (phy_bind->phy) + return phy_bind->phy; + else + return ERR_PTR(-EPROBE_DEFER); + } + } + + return ERR_PTR(-ENODEV); +} + +static struct usb_phy *__of_usb_find_phy(struct device_node *node) +{ + struct usb_phy *phy; + + list_for_each_entry(phy, &phy_list, head) { + if (node != phy->dev->of_node) + continue; + + return phy; + } + + return ERR_PTR(-ENODEV); +} + static void devm_usb_phy_release(struct device *dev, void *res) { struct usb_phy *phy = *(struct usb_phy **)res; @@ -95,7 +130,7 @@ struct usb_phy *usb_get_phy(enum usb_phy_type type) spin_lock_irqsave(&phy_lock, flags); phy = __usb_find_phy(&phy_list, type); - if (IS_ERR(phy)) { + if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) { pr_err("unable to find transceiver of type %s\n", usb_phy_type_string(type)); goto err0; @@ -110,6 +145,133 @@ err0: } EXPORT_SYMBOL(usb_get_phy); + /** + * devm_usb_get_phy_by_phandle - find the USB PHY by phandle + * @dev - device that requests this phy + * @phandle - name of the property holding the phy phandle value + * @index - the index of the phy + * + * Returns the phy driver associated with the given phandle value, + * after getting a refcount to it, -ENODEV if there is no such phy or + * -EPROBE_DEFER if there is a phandle to the phy, but the device is + * not yet loaded. While at that, it also associates the device with + * the phy using devres. On driver detach, release function is invoked + * on the devres data, then, devres data is freed. + * + * For use by USB host and peripheral drivers. + */ +struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, + const char *phandle, u8 index) +{ + struct usb_phy *phy = ERR_PTR(-ENOMEM), **ptr; + unsigned long flags; + struct device_node *node; + + if (!dev->of_node) { + dev_dbg(dev, "device does not have a device node entry\n"); + return ERR_PTR(-EINVAL); + } + + node = of_parse_phandle(dev->of_node, phandle, index); + if (!node) { + dev_dbg(dev, "failed to get %s phandle in %s node\n", phandle, + dev->of_node->full_name); + return ERR_PTR(-ENODEV); + } + + ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) { + dev_dbg(dev, "failed to allocate memory for devres\n"); + goto err0; + } + + spin_lock_irqsave(&phy_lock, flags); + + phy = __of_usb_find_phy(node); + if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) { + phy = ERR_PTR(-EPROBE_DEFER); + devres_free(ptr); + goto err1; + } + + *ptr = phy; + devres_add(dev, ptr); + + get_device(phy->dev); + +err1: + spin_unlock_irqrestore(&phy_lock, flags); + +err0: + of_node_put(node); + + return phy; +} +EXPORT_SYMBOL(devm_usb_get_phy_by_phandle); + +/** + * usb_get_phy_dev - find the USB PHY + * @dev - device that requests this phy + * @index - the index of the phy + * + * Returns the phy driver, after getting a refcount to it; or + * -ENODEV if there is no such phy. The caller is responsible for + * calling usb_put_phy() to release that count. + * + * For use by USB host and peripheral drivers. + */ +struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index) +{ + struct usb_phy *phy = NULL; + unsigned long flags; + + spin_lock_irqsave(&phy_lock, flags); + + phy = __usb_find_phy_dev(dev, &phy_bind_list, index); + if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) { + pr_err("unable to find transceiver\n"); + goto err0; + } + + get_device(phy->dev); + +err0: + spin_unlock_irqrestore(&phy_lock, flags); + + return phy; +} +EXPORT_SYMBOL(usb_get_phy_dev); + +/** + * devm_usb_get_phy_dev - find the USB PHY using device ptr and index + * @dev - device that requests this phy + * @index - the index of the phy + * + * Gets the phy using usb_get_phy_dev(), and associates a device with it using + * devres. On driver detach, release function is invoked on the devres data, + * then, devres data is freed. + * + * For use by USB host and peripheral drivers. + */ +struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index) +{ + struct usb_phy **ptr, *phy; + + ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return NULL; + + phy = usb_get_phy_dev(dev, index); + if (!IS_ERR(phy)) { + *ptr = phy; + devres_add(dev, ptr); + } else + devres_free(ptr); + + return phy; +} +EXPORT_SYMBOL(devm_usb_get_phy_dev); + /** * devm_usb_put_phy - release the USB PHY * @dev - device that wants to release this phy @@ -139,8 +301,12 @@ EXPORT_SYMBOL(devm_usb_put_phy); */ void usb_put_phy(struct usb_phy *x) { - if (x) + if (x) { + struct module *owner = x->dev->driver->owner; + put_device(x->dev); + module_put(owner); + } } EXPORT_SYMBOL(usb_put_phy); @@ -185,6 +351,36 @@ out: EXPORT_SYMBOL(usb_add_phy); /** + * usb_add_phy_dev - declare the USB PHY + * @x: the USB phy to be used; or NULL + * + * This call is exclusively for use by phy drivers, which + * coordinate the activities of drivers for host and peripheral + * controllers, and in some cases for VBUS current regulation. + */ +int usb_add_phy_dev(struct usb_phy *x) +{ + struct usb_phy_bind *phy_bind; + unsigned long flags; + + if (!x->dev) { + dev_err(x->dev, "no device provided for PHY\n"); + return -EINVAL; + } + + spin_lock_irqsave(&phy_lock, flags); + list_for_each_entry(phy_bind, &phy_bind_list, list) + if (!(strcmp(phy_bind->phy_dev_name, dev_name(x->dev)))) + phy_bind->phy = x; + + list_add_tail(&x->head, &phy_list); + + spin_unlock_irqrestore(&phy_lock, flags); + return 0; +} +EXPORT_SYMBOL(usb_add_phy_dev); + +/** * usb_remove_phy - remove the OTG PHY * @x: the USB OTG PHY to be removed; * @@ -193,14 +389,55 @@ EXPORT_SYMBOL(usb_add_phy); void usb_remove_phy(struct usb_phy *x) { unsigned long flags; + struct usb_phy_bind *phy_bind; spin_lock_irqsave(&phy_lock, flags); - if (x) + if (x) { + list_for_each_entry(phy_bind, &phy_bind_list, list) + if (phy_bind->phy == x) + phy_bind->phy = NULL; list_del(&x->head); + } spin_unlock_irqrestore(&phy_lock, flags); } EXPORT_SYMBOL(usb_remove_phy); +/** + * usb_bind_phy - bind the phy and the controller that uses the phy + * @dev_name: the device name of the device that will bind to the phy + * @index: index to specify the port number + * @phy_dev_name: the device name of the phy + * + * Fills the phy_bind structure with the dev_name and phy_dev_name. This will + * be used when the phy driver registers the phy and when the controller + * requests this phy. + * + * To be used by platform specific initialization code. + */ +int __init usb_bind_phy(const char *dev_name, u8 index, + const char *phy_dev_name) +{ + struct usb_phy_bind *phy_bind; + unsigned long flags; + + phy_bind = kzalloc(sizeof(*phy_bind), GFP_KERNEL); + if (!phy_bind) { + pr_err("phy_bind(): No memory for phy_bind"); + return -ENOMEM; + } + + phy_bind->dev_name = dev_name; + phy_bind->phy_dev_name = phy_dev_name; + phy_bind->index = index; + + spin_lock_irqsave(&phy_lock, flags); + list_add_tail(&phy_bind->list, &phy_bind_list); + spin_unlock_irqrestore(&phy_lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(usb_bind_phy); + const char *otg_state_string(enum usb_otg_state state) { switch (state) { diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c index f0d2e7530cf..a994715a310 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/otg/twl4030-usb.c @@ -123,10 +123,10 @@ #define PHY_CLK_CTRL_STS 0xFF #define PHY_DPLL_CLK (1 << 0) -/* In module TWL4030_MODULE_PM_MASTER */ +/* In module TWL_MODULE_PM_MASTER */ #define STS_HW_CONDITIONS 0x0F -/* In module TWL4030_MODULE_PM_RECEIVER */ +/* In module TWL_MODULE_PM_RECEIVER */ #define VUSB_DEDICATED1 0x7D #define VUSB_DEDICATED2 0x7E #define VUSB1V5_DEV_GRP 0x71 @@ -195,14 +195,14 @@ static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl, } #define twl4030_usb_write_verify(twl, address, data) \ - twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_USB, (data), (address)) + twl4030_i2c_write_u8_verify(twl, TWL_MODULE_USB, (data), (address)) static inline int twl4030_usb_write(struct twl4030_usb *twl, u8 address, u8 data) { int ret = 0; - ret = twl_i2c_write_u8(TWL4030_MODULE_USB, data, address); + ret = twl_i2c_write_u8(TWL_MODULE_USB, data, address); if (ret < 0) dev_dbg(twl->dev, "TWL4030:USB:Write[0x%x] Error %d\n", address, ret); @@ -227,7 +227,7 @@ static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address) static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address) { - return twl4030_readb(twl, TWL4030_MODULE_USB, address); + return twl4030_readb(twl, TWL_MODULE_USB, address); } /*-------------------------------------------------------------------------*/ @@ -264,8 +264,7 @@ static enum omap_musb_vbus_id_status * signal is active, the OTG module is activated, and * its interrupt may be raised (may wake the system). */ - status = twl4030_readb(twl, TWL4030_MODULE_PM_MASTER, - STS_HW_CONDITIONS); + status = twl4030_readb(twl, TWL_MODULE_PM_MASTER, STS_HW_CONDITIONS); if (status < 0) dev_err(twl->dev, "USB link status err %d\n", status); else if (status & (BIT(7) | BIT(2))) { @@ -372,8 +371,7 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on) * SLEEP. We work around this by clearing the bit after usv3v1 * is re-activated. This ensures that VUSB3V1 is really active. */ - twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, - VUSB_DEDICATED2); + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); regulator_enable(twl->usb1v5); __twl4030_phy_power(twl, 1); twl4030_usb_write(twl, PHY_CLK_CTRL, @@ -419,50 +417,48 @@ static void twl4030_phy_resume(struct twl4030_usb *twl) static int twl4030_usb_ldo_init(struct twl4030_usb *twl) { /* Enable writing to power configuration registers */ - twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, - TWL4030_PM_MASTER_KEY_CFG1, - TWL4030_PM_MASTER_PROTECT_KEY); + twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1, + TWL4030_PM_MASTER_PROTECT_KEY); - twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, - TWL4030_PM_MASTER_KEY_CFG2, - TWL4030_PM_MASTER_PROTECT_KEY); + twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG2, + TWL4030_PM_MASTER_PROTECT_KEY); /* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/ - /*twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/ + /*twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/ /* input to VUSB3V1 LDO is from VBAT, not VBUS */ - twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); /* Initialize 3.1V regulator */ - twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP); + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP); twl->usb3v1 = regulator_get(twl->dev, "usb3v1"); if (IS_ERR(twl->usb3v1)) return -ENODEV; - twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE); + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE); /* Initialize 1.5V regulator */ - twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP); + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP); twl->usb1v5 = regulator_get(twl->dev, "usb1v5"); if (IS_ERR(twl->usb1v5)) goto fail1; - twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE); + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE); /* Initialize 1.8V regulator */ - twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP); + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP); twl->usb1v8 = regulator_get(twl->dev, "usb1v8"); if (IS_ERR(twl->usb1v8)) goto fail2; - twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE); + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE); /* disable access to power configuration registers */ - twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, - TWL4030_PM_MASTER_PROTECT_KEY); + twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0, + TWL4030_PM_MASTER_PROTECT_KEY); return 0; @@ -579,7 +575,7 @@ static int twl4030_set_host(struct usb_otg *otg, struct usb_bus *host) return 0; } -static int __devinit twl4030_usb_probe(struct platform_device *pdev) +static int twl4030_usb_probe(struct platform_device *pdev) { struct twl4030_usb_data *pdata = pdev->dev.platform_data; struct twl4030_usb *twl; @@ -614,6 +610,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) twl->phy.dev = twl->dev; twl->phy.label = "twl4030"; twl->phy.otg = otg; + twl->phy.type = USB_PHY_TYPE_USB2; twl->phy.set_suspend = twl4030_set_suspend; otg->phy = &twl->phy; @@ -628,7 +625,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) dev_err(&pdev->dev, "ldo init failed\n"); return err; } - usb_add_phy(&twl->phy, USB_PHY_TYPE_USB2); + usb_add_phy_dev(&twl->phy); platform_set_drvdata(pdev, twl); if (device_create_file(&pdev->dev, &dev_attr_vbus)) diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c index fcadef7864f..8cd6cf49bdb 100644 --- a/drivers/usb/otg/twl6030-usb.c +++ b/drivers/usb/otg/twl6030-usb.c @@ -310,7 +310,7 @@ static int twl6030_set_vbus(struct phy_companion *comparator, bool enabled) return 0; } -static int __devinit twl6030_usb_probe(struct platform_device *pdev) +static int twl6030_usb_probe(struct platform_device *pdev) { u32 ret; struct twl6030_usb *twl; diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 63c339b3e67..65217a59006 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -6,13 +6,34 @@ comment "USB Physical Layer drivers" config OMAP_USB2 tristate "OMAP USB2 PHY Driver" + depends on ARCH_OMAP2PLUS select USB_OTG_UTILS + select OMAP_CONTROL_USB help Enable this to support the transceiver that is part of SOC. This driver takes care of all the PHY functionality apart from comparator. The USB OTG controller communicates with the comparator using this driver. +config OMAP_USB3 + tristate "OMAP USB3 PHY Driver" + select USB_OTG_UTILS + select OMAP_CONTROL_USB + help + Enable this to support the USB3 PHY that is part of SOC. This + driver takes care of all the PHY functionality apart from comparator. + This driver interacts with the "OMAP Control USB Driver" to power + on/off the PHY. + +config OMAP_CONTROL_USB + tristate "OMAP CONTROL USB Driver" + help + Enable this to add support for the USB part present in the control + module. This driver has API to power on the USB2 PHY and to write to + the mailbox. The mailbox is present only in omap4 and the register to + power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an + additional register to power on USB3 PHY. + config USB_ISP1301 tristate "NXP ISP1301 USB transceiver support" depends on USB || USB_GADGET @@ -32,3 +53,23 @@ config MV_U3D_PHY help Enable this to support Marvell USB 3.0 phy controller for Marvell SoC. + +config USB_RCAR_PHY + tristate "Renesas R-Car USB phy support" + depends on USB || USB_GADGET + select USB_OTG_UTILS + help + Say Y here to add support for the Renesas R-Car USB phy driver. + This chip is typically used as USB phy for USB host, gadget. + This driver supports: R8A7779 + + To compile this driver as a module, choose M here: the + module will be called rcar-phy. + +config SAMSUNG_USBPHY + bool "Samsung USB PHY controller Driver" + depends on USB_S3C_HSOTG || USB_EHCI_S5P || USB_OHCI_EXYNOS + select USB_OTG_UTILS + help + Enable this to support Samsung USB phy controller for samsung + SoCs. diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index b069f29f122..b13faa193e0 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -5,6 +5,10 @@ ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG obj-$(CONFIG_OMAP_USB2) += omap-usb2.o +obj-$(CONFIG_OMAP_USB3) += omap-usb3.o +obj-$(CONFIG_OMAP_CONTROL_USB) += omap-control-usb.o obj-$(CONFIG_USB_ISP1301) += isp1301.o obj-$(CONFIG_MV_U3D_PHY) += mv_u3d_phy.o obj-$(CONFIG_USB_EHCI_TEGRA) += tegra_usb_phy.o +obj-$(CONFIG_USB_RCAR_PHY) += rcar-phy.o +obj-$(CONFIG_SAMSUNG_USBPHY) += samsung-usbphy.o diff --git a/drivers/usb/phy/mv_u3d_phy.c b/drivers/usb/phy/mv_u3d_phy.c index 9f1c5d3c60e..9d8599122aa 100644 --- a/drivers/usb/phy/mv_u3d_phy.c +++ b/drivers/usb/phy/mv_u3d_phy.c @@ -262,7 +262,7 @@ calstart: return 0; } -static int __devinit mv_u3d_phy_probe(struct platform_device *pdev) +static int mv_u3d_phy_probe(struct platform_device *pdev) { struct mv_u3d_phy *mv_u3d_phy; struct mv_usb_platform_data *pdata; @@ -283,11 +283,9 @@ static int __devinit mv_u3d_phy_probe(struct platform_device *pdev) return -ENODEV; } - phy_base = devm_request_and_ioremap(dev, res); - if (!phy_base) { - dev_err(dev, "%s: register mapping failed\n", __func__); - return -ENXIO; - } + phy_base = devm_ioremap_resource(dev, res); + if (IS_ERR(phy_base)) + return PTR_ERR(phy_base); mv_u3d_phy = devm_kzalloc(dev, sizeof(*mv_u3d_phy), GFP_KERNEL); if (!mv_u3d_phy) @@ -331,7 +329,7 @@ static int __exit mv_u3d_phy_remove(struct platform_device *pdev) static struct platform_driver mv_u3d_phy_driver = { .probe = mv_u3d_phy_probe, - .remove = __devexit_p(mv_u3d_phy_remove), + .remove = mv_u3d_phy_remove, .driver = { .name = "mv-u3d-phy", .owner = THIS_MODULE, diff --git a/drivers/usb/phy/omap-control-usb.c b/drivers/usb/phy/omap-control-usb.c new file mode 100644 index 00000000000..1419ceda975 --- /dev/null +++ b/drivers/usb/phy/omap-control-usb.c @@ -0,0 +1,289 @@ +/* + * omap-control-usb.c - The USB part of control module. + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I <kishon@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/usb/omap_control_usb.h> + +static struct omap_control_usb *control_usb; + +/** + * omap_get_control_dev - returns the device pointer for this control device + * + * This API should be called to get the device pointer for this control + * module device. This device pointer should be used for called other + * exported API's in this driver. + * + * To be used by PHY driver and glue driver. + */ +struct device *omap_get_control_dev(void) +{ + if (!control_usb) + return ERR_PTR(-ENODEV); + + return control_usb->dev; +} +EXPORT_SYMBOL_GPL(omap_get_control_dev); + +/** + * omap_control_usb3_phy_power - power on/off the serializer using control + * module + * @dev: the control module device + * @on: 0 to off and 1 to on based on powering on or off the PHY + * + * usb3 PHY driver should call this API to power on or off the PHY. + */ +void omap_control_usb3_phy_power(struct device *dev, bool on) +{ + u32 val; + unsigned long rate; + struct omap_control_usb *control_usb = dev_get_drvdata(dev); + + if (control_usb->type != OMAP_CTRL_DEV_TYPE2) + return; + + rate = clk_get_rate(control_usb->sys_clk); + rate = rate/1000000; + + val = readl(control_usb->phy_power); + + if (on) { + val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK | + OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK); + val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON << + OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; + val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT; + } else { + val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK; + val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF << + OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; + } + + writel(val, control_usb->phy_power); +} +EXPORT_SYMBOL_GPL(omap_control_usb3_phy_power); + +/** + * omap_control_usb_phy_power - power on/off the phy using control module reg + * @dev: the control module device + * @on: 0 or 1, based on powering on or off the PHY + */ +void omap_control_usb_phy_power(struct device *dev, int on) +{ + u32 val; + struct omap_control_usb *control_usb = dev_get_drvdata(dev); + + val = readl(control_usb->dev_conf); + + if (on) + val &= ~OMAP_CTRL_DEV_PHY_PD; + else + val |= OMAP_CTRL_DEV_PHY_PD; + + writel(val, control_usb->dev_conf); +} +EXPORT_SYMBOL_GPL(omap_control_usb_phy_power); + +/** + * omap_control_usb_host_mode - set AVALID, VBUSVALID and ID pin in grounded + * @ctrl_usb: struct omap_control_usb * + * + * Writes to the mailbox register to notify the usb core that a usb + * device has been connected. + */ +static void omap_control_usb_host_mode(struct omap_control_usb *ctrl_usb) +{ + u32 val; + + val = readl(ctrl_usb->otghs_control); + val &= ~(OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND); + val |= OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID; + writel(val, ctrl_usb->otghs_control); +} + +/** + * omap_control_usb_device_mode - set AVALID, VBUSVALID and ID pin in high + * impedance + * @ctrl_usb: struct omap_control_usb * + * + * Writes to the mailbox register to notify the usb core that it has been + * connected to a usb host. + */ +static void omap_control_usb_device_mode(struct omap_control_usb *ctrl_usb) +{ + u32 val; + + val = readl(ctrl_usb->otghs_control); + val &= ~OMAP_CTRL_DEV_SESSEND; + val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_AVALID | + OMAP_CTRL_DEV_VBUSVALID; + writel(val, ctrl_usb->otghs_control); +} + +/** + * omap_control_usb_set_sessionend - Enable SESSIONEND and IDIG to high + * impedance + * @ctrl_usb: struct omap_control_usb * + * + * Writes to the mailbox register to notify the usb core it's now in + * disconnected state. + */ +static void omap_control_usb_set_sessionend(struct omap_control_usb *ctrl_usb) +{ + u32 val; + + val = readl(ctrl_usb->otghs_control); + val &= ~(OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID); + val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND; + writel(val, ctrl_usb->otghs_control); +} + +/** + * omap_control_usb_set_mode - Calls to functions to set USB in one of host mode + * or device mode or to denote disconnected state + * @dev: the control module device + * @mode: The mode to which usb should be configured + * + * This is an API to write to the mailbox register to notify the usb core that + * a usb device has been connected. + */ +void omap_control_usb_set_mode(struct device *dev, + enum omap_control_usb_mode mode) +{ + struct omap_control_usb *ctrl_usb; + + if (IS_ERR(dev) || control_usb->type != OMAP_CTRL_DEV_TYPE1) + return; + + ctrl_usb = dev_get_drvdata(dev); + + switch (mode) { + case USB_MODE_HOST: + omap_control_usb_host_mode(ctrl_usb); + break; + case USB_MODE_DEVICE: + omap_control_usb_device_mode(ctrl_usb); + break; + case USB_MODE_DISCONNECT: + omap_control_usb_set_sessionend(ctrl_usb); + break; + default: + dev_vdbg(dev, "invalid omap control usb mode\n"); + } +} +EXPORT_SYMBOL_GPL(omap_control_usb_set_mode); + +static int omap_control_usb_probe(struct platform_device *pdev) +{ + struct resource *res; + struct device_node *np = pdev->dev.of_node; + struct omap_control_usb_platform_data *pdata = pdev->dev.platform_data; + + control_usb = devm_kzalloc(&pdev->dev, sizeof(*control_usb), + GFP_KERNEL); + if (!control_usb) { + dev_err(&pdev->dev, "unable to alloc memory for control usb\n"); + return -ENOMEM; + } + + if (np) { + of_property_read_u32(np, "ti,type", &control_usb->type); + } else if (pdata) { + control_usb->type = pdata->type; + } else { + dev_err(&pdev->dev, "no pdata present\n"); + return -EINVAL; + } + + control_usb->dev = &pdev->dev; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "control_dev_conf"); + control_usb->dev_conf = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(control_usb->dev_conf)) + return PTR_ERR(control_usb->dev_conf); + + if (control_usb->type == OMAP_CTRL_DEV_TYPE1) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "otghs_control"); + control_usb->otghs_control = devm_ioremap_resource( + &pdev->dev, res); + if (IS_ERR(control_usb->otghs_control)) + return PTR_ERR(control_usb->otghs_control); + } + + if (control_usb->type == OMAP_CTRL_DEV_TYPE2) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "phy_power_usb"); + control_usb->phy_power = devm_ioremap_resource( + &pdev->dev, res); + if (IS_ERR(control_usb->phy_power)) + return PTR_ERR(control_usb->phy_power); + + control_usb->sys_clk = devm_clk_get(control_usb->dev, + "sys_clkin"); + if (IS_ERR(control_usb->sys_clk)) { + pr_err("%s: unable to get sys_clkin\n", __func__); + return -EINVAL; + } + } + + + dev_set_drvdata(control_usb->dev, control_usb); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id omap_control_usb_id_table[] = { + { .compatible = "ti,omap-control-usb" }, + {} +}; +MODULE_DEVICE_TABLE(of, omap_control_usb_id_table); +#endif + +static struct platform_driver omap_control_usb_driver = { + .probe = omap_control_usb_probe, + .driver = { + .name = "omap-control-usb", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(omap_control_usb_id_table), + }, +}; + +static int __init omap_control_usb_init(void) +{ + return platform_driver_register(&omap_control_usb_driver); +} +subsys_initcall(omap_control_usb_init); + +static void __exit omap_control_usb_exit(void) +{ + platform_driver_unregister(&omap_control_usb_driver); +} +module_exit(omap_control_usb_exit); + +MODULE_ALIAS("platform: omap_control_usb"); +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_DESCRIPTION("OMAP Control Module USB Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/phy/omap-usb2.c b/drivers/usb/phy/omap-usb2.c index 15ab3d6f2e8..844ab68f08d 100644 --- a/drivers/usb/phy/omap-usb2.c +++ b/drivers/usb/phy/omap-usb2.c @@ -27,6 +27,7 @@ #include <linux/err.h> #include <linux/pm_runtime.h> #include <linux/delay.h> +#include <linux/usb/omap_control_usb.h> /** * omap_usb2_set_comparator - links the comparator present in the sytem with @@ -52,29 +53,6 @@ int omap_usb2_set_comparator(struct phy_companion *comparator) } EXPORT_SYMBOL_GPL(omap_usb2_set_comparator); -/** - * omap_usb_phy_power - power on/off the phy using control module reg - * @phy: struct omap_usb * - * @on: 0 or 1, based on powering on or off the PHY - * - * XXX: Remove this function once control module driver gets merged - */ -static void omap_usb_phy_power(struct omap_usb *phy, int on) -{ - u32 val; - - if (on) { - val = readl(phy->control_dev); - if (val & PHY_PD) { - writel(~PHY_PD, phy->control_dev); - /* XXX: add proper documentation for this delay */ - mdelay(200); - } - } else { - writel(PHY_PD, phy->control_dev); - } -} - static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled) { struct omap_usb *phy = phy_to_omapusb(otg->phy); @@ -124,7 +102,7 @@ static int omap_usb2_suspend(struct usb_phy *x, int suspend) struct omap_usb *phy = phy_to_omapusb(x); if (suspend && !phy->is_suspended) { - omap_usb_phy_power(phy, 0); + omap_control_usb_phy_power(phy->control_dev, 0); pm_runtime_put_sync(phy->dev); phy->is_suspended = 1; } else if (!suspend && phy->is_suspended) { @@ -134,18 +112,17 @@ static int omap_usb2_suspend(struct usb_phy *x, int suspend) ret); return ret; } - omap_usb_phy_power(phy, 1); + omap_control_usb_phy_power(phy->control_dev, 1); phy->is_suspended = 0; } return 0; } -static int __devinit omap_usb2_probe(struct platform_device *pdev) +static int omap_usb2_probe(struct platform_device *pdev) { struct omap_usb *phy; struct usb_otg *otg; - struct resource *res; phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); if (!phy) { @@ -165,17 +142,16 @@ static int __devinit omap_usb2_probe(struct platform_device *pdev) phy->phy.label = "omap-usb2"; phy->phy.set_suspend = omap_usb2_suspend; phy->phy.otg = otg; + phy->phy.type = USB_PHY_TYPE_USB2; - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - - phy->control_dev = devm_request_and_ioremap(&pdev->dev, res); - if (phy->control_dev == NULL) { - dev_err(&pdev->dev, "Failed to obtain io memory\n"); - return -ENXIO; + phy->control_dev = omap_get_control_dev(); + if (IS_ERR(phy->control_dev)) { + dev_dbg(&pdev->dev, "Failed to get control device\n"); + return -ENODEV; } phy->is_suspended = 1; - omap_usb_phy_power(phy, 0); + omap_control_usb_phy_power(phy->control_dev, 0); otg->set_host = omap_usb_set_host; otg->set_peripheral = omap_usb_set_peripheral; @@ -190,7 +166,13 @@ static int __devinit omap_usb2_probe(struct platform_device *pdev) } clk_prepare(phy->wkupclk); - usb_add_phy(&phy->phy, USB_PHY_TYPE_USB2); + phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m"); + if (IS_ERR(phy->optclk)) + dev_vdbg(&pdev->dev, "unable to get refclk960m\n"); + else + clk_prepare(phy->optclk); + + usb_add_phy_dev(&phy->phy); platform_set_drvdata(pdev, phy); @@ -199,11 +181,13 @@ static int __devinit omap_usb2_probe(struct platform_device *pdev) return 0; } -static int __devexit omap_usb2_remove(struct platform_device *pdev) +static int omap_usb2_remove(struct platform_device *pdev) { struct omap_usb *phy = platform_get_drvdata(pdev); clk_unprepare(phy->wkupclk); + if (!IS_ERR(phy->optclk)) + clk_unprepare(phy->optclk); usb_remove_phy(&phy->phy); return 0; @@ -217,6 +201,8 @@ static int omap_usb2_runtime_suspend(struct device *dev) struct omap_usb *phy = platform_get_drvdata(pdev); clk_disable(phy->wkupclk); + if (!IS_ERR(phy->optclk)) + clk_disable(phy->optclk); return 0; } @@ -228,9 +214,25 @@ static int omap_usb2_runtime_resume(struct device *dev) struct omap_usb *phy = platform_get_drvdata(pdev); ret = clk_enable(phy->wkupclk); - if (ret < 0) + if (ret < 0) { dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); + goto err0; + } + + if (!IS_ERR(phy->optclk)) { + ret = clk_enable(phy->optclk); + if (ret < 0) { + dev_err(phy->dev, "Failed to enable optclk %d\n", ret); + goto err1; + } + } + + return 0; + +err1: + clk_disable(phy->wkupclk); +err0: return ret; } @@ -254,7 +256,7 @@ MODULE_DEVICE_TABLE(of, omap_usb2_id_table); static struct platform_driver omap_usb2_driver = { .probe = omap_usb2_probe, - .remove = __devexit_p(omap_usb2_remove), + .remove = omap_usb2_remove, .driver = { .name = "omap-usb2", .owner = THIS_MODULE, diff --git a/drivers/usb/phy/omap-usb3.c b/drivers/usb/phy/omap-usb3.c new file mode 100644 index 00000000000..a6e60b1e102 --- /dev/null +++ b/drivers/usb/phy/omap-usb3.c @@ -0,0 +1,353 @@ +/* + * omap-usb3 - USB PHY, talking to dwc3 controller in OMAP. + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I <kishon@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/usb/omap_usb.h> +#include <linux/of.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/pm_runtime.h> +#include <linux/delay.h> +#include <linux/usb/omap_control_usb.h> + +#define NUM_SYS_CLKS 5 +#define PLL_STATUS 0x00000004 +#define PLL_GO 0x00000008 +#define PLL_CONFIGURATION1 0x0000000C +#define PLL_CONFIGURATION2 0x00000010 +#define PLL_CONFIGURATION3 0x00000014 +#define PLL_CONFIGURATION4 0x00000020 + +#define PLL_REGM_MASK 0x001FFE00 +#define PLL_REGM_SHIFT 0x9 +#define PLL_REGM_F_MASK 0x0003FFFF +#define PLL_REGM_F_SHIFT 0x0 +#define PLL_REGN_MASK 0x000001FE +#define PLL_REGN_SHIFT 0x1 +#define PLL_SELFREQDCO_MASK 0x0000000E +#define PLL_SELFREQDCO_SHIFT 0x1 +#define PLL_SD_MASK 0x0003FC00 +#define PLL_SD_SHIFT 0x9 +#define SET_PLL_GO 0x1 +#define PLL_TICOPWDN 0x10000 +#define PLL_LOCK 0x2 +#define PLL_IDLE 0x1 + +/* + * This is an Empirical value that works, need to confirm the actual + * value required for the USB3PHY_PLL_CONFIGURATION2.PLL_IDLE status + * to be correctly reflected in the USB3PHY_PLL_STATUS register. + */ +# define PLL_IDLE_TIME 100; + +enum sys_clk_rate { + CLK_RATE_UNDEFINED = -1, + CLK_RATE_12MHZ, + CLK_RATE_16MHZ, + CLK_RATE_19MHZ, + CLK_RATE_26MHZ, + CLK_RATE_38MHZ +}; + +static struct usb_dpll_params omap_usb3_dpll_params[NUM_SYS_CLKS] = { + {1250, 5, 4, 20, 0}, /* 12 MHz */ + {3125, 20, 4, 20, 0}, /* 16.8 MHz */ + {1172, 8, 4, 20, 65537}, /* 19.2 MHz */ + {1250, 12, 4, 20, 0}, /* 26 MHz */ + {3125, 47, 4, 20, 92843}, /* 38.4 MHz */ +}; + +static int omap_usb3_suspend(struct usb_phy *x, int suspend) +{ + struct omap_usb *phy = phy_to_omapusb(x); + int val; + int timeout = PLL_IDLE_TIME; + + if (suspend && !phy->is_suspended) { + val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); + val |= PLL_IDLE; + omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); + + do { + val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS); + if (val & PLL_TICOPWDN) + break; + udelay(1); + } while (--timeout); + + omap_control_usb3_phy_power(phy->control_dev, 0); + + phy->is_suspended = 1; + } else if (!suspend && phy->is_suspended) { + phy->is_suspended = 0; + + val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); + val &= ~PLL_IDLE; + omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); + + do { + val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS); + if (!(val & PLL_TICOPWDN)) + break; + udelay(1); + } while (--timeout); + } + + return 0; +} + +static inline enum sys_clk_rate __get_sys_clk_index(unsigned long rate) +{ + switch (rate) { + case 12000000: + return CLK_RATE_12MHZ; + case 16800000: + return CLK_RATE_16MHZ; + case 19200000: + return CLK_RATE_19MHZ; + case 26000000: + return CLK_RATE_26MHZ; + case 38400000: + return CLK_RATE_38MHZ; + default: + return CLK_RATE_UNDEFINED; + } +} + +static void omap_usb_dpll_relock(struct omap_usb *phy) +{ + u32 val; + unsigned long timeout; + + omap_usb_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO); + + timeout = jiffies + msecs_to_jiffies(20); + do { + val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS); + if (val & PLL_LOCK) + break; + } while (!WARN_ON(time_after(jiffies, timeout))); +} + +static int omap_usb_dpll_lock(struct omap_usb *phy) +{ + u32 val; + unsigned long rate; + enum sys_clk_rate clk_index; + + rate = clk_get_rate(phy->sys_clk); + clk_index = __get_sys_clk_index(rate); + + if (clk_index == CLK_RATE_UNDEFINED) { + pr_err("dpll cannot be locked for sys clk freq:%luHz\n", rate); + return -EINVAL; + } + + val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); + val &= ~PLL_REGN_MASK; + val |= omap_usb3_dpll_params[clk_index].n << PLL_REGN_SHIFT; + omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); + + val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); + val &= ~PLL_SELFREQDCO_MASK; + val |= omap_usb3_dpll_params[clk_index].freq << PLL_SELFREQDCO_SHIFT; + omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); + + val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); + val &= ~PLL_REGM_MASK; + val |= omap_usb3_dpll_params[clk_index].m << PLL_REGM_SHIFT; + omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); + + val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4); + val &= ~PLL_REGM_F_MASK; + val |= omap_usb3_dpll_params[clk_index].mf << PLL_REGM_F_SHIFT; + omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val); + + val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3); + val &= ~PLL_SD_MASK; + val |= omap_usb3_dpll_params[clk_index].sd << PLL_SD_SHIFT; + omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val); + + omap_usb_dpll_relock(phy); + + return 0; +} + +static int omap_usb3_init(struct usb_phy *x) +{ + struct omap_usb *phy = phy_to_omapusb(x); + + omap_usb_dpll_lock(phy); + omap_control_usb3_phy_power(phy->control_dev, 1); + + return 0; +} + +static int omap_usb3_probe(struct platform_device *pdev) +{ + struct omap_usb *phy; + struct resource *res; + + phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); + if (!phy) { + dev_err(&pdev->dev, "unable to alloc mem for OMAP USB3 PHY\n"); + return -ENOMEM; + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pll_ctrl"); + phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(phy->pll_ctrl_base)) + return PTR_ERR(phy->pll_ctrl_base); + + phy->dev = &pdev->dev; + + phy->phy.dev = phy->dev; + phy->phy.label = "omap-usb3"; + phy->phy.init = omap_usb3_init; + phy->phy.set_suspend = omap_usb3_suspend; + phy->phy.type = USB_PHY_TYPE_USB3; + + phy->is_suspended = 1; + phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k"); + if (IS_ERR(phy->wkupclk)) { + dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n"); + return PTR_ERR(phy->wkupclk); + } + clk_prepare(phy->wkupclk); + + phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m"); + if (IS_ERR(phy->optclk)) { + dev_err(&pdev->dev, "unable to get usb_otg_ss_refclk960m\n"); + return PTR_ERR(phy->optclk); + } + clk_prepare(phy->optclk); + + phy->sys_clk = devm_clk_get(phy->dev, "sys_clkin"); + if (IS_ERR(phy->sys_clk)) { + pr_err("%s: unable to get sys_clkin\n", __func__); + return -EINVAL; + } + + phy->control_dev = omap_get_control_dev(); + if (IS_ERR(phy->control_dev)) { + dev_dbg(&pdev->dev, "Failed to get control device\n"); + return -ENODEV; + } + + omap_control_usb3_phy_power(phy->control_dev, 0); + usb_add_phy_dev(&phy->phy); + + platform_set_drvdata(pdev, phy); + + pm_runtime_enable(phy->dev); + pm_runtime_get(&pdev->dev); + + return 0; +} + +static int omap_usb3_remove(struct platform_device *pdev) +{ + struct omap_usb *phy = platform_get_drvdata(pdev); + + clk_unprepare(phy->wkupclk); + clk_unprepare(phy->optclk); + usb_remove_phy(&phy->phy); + if (!pm_runtime_suspended(&pdev->dev)) + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + return 0; +} + +#ifdef CONFIG_PM_RUNTIME + +static int omap_usb3_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct omap_usb *phy = platform_get_drvdata(pdev); + + clk_disable(phy->wkupclk); + clk_disable(phy->optclk); + + return 0; +} + +static int omap_usb3_runtime_resume(struct device *dev) +{ + u32 ret = 0; + struct platform_device *pdev = to_platform_device(dev); + struct omap_usb *phy = platform_get_drvdata(pdev); + + ret = clk_enable(phy->optclk); + if (ret) { + dev_err(phy->dev, "Failed to enable optclk %d\n", ret); + goto err1; + } + + ret = clk_enable(phy->wkupclk); + if (ret) { + dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); + goto err2; + } + + return 0; + +err2: + clk_disable(phy->optclk); + +err1: + return ret; +} + +static const struct dev_pm_ops omap_usb3_pm_ops = { + SET_RUNTIME_PM_OPS(omap_usb3_runtime_suspend, omap_usb3_runtime_resume, + NULL) +}; + +#define DEV_PM_OPS (&omap_usb3_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif + +#ifdef CONFIG_OF +static const struct of_device_id omap_usb3_id_table[] = { + { .compatible = "ti,omap-usb3" }, + {} +}; +MODULE_DEVICE_TABLE(of, omap_usb3_id_table); +#endif + +static struct platform_driver omap_usb3_driver = { + .probe = omap_usb3_probe, + .remove = omap_usb3_remove, + .driver = { + .name = "omap-usb3", + .owner = THIS_MODULE, + .pm = DEV_PM_OPS, + .of_match_table = of_match_ptr(omap_usb3_id_table), + }, +}; + +module_platform_driver(omap_usb3_driver); + +MODULE_ALIAS("platform: omap_usb3"); +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_DESCRIPTION("OMAP USB3 phy driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/phy/rcar-phy.c b/drivers/usb/phy/rcar-phy.c new file mode 100644 index 00000000000..a35681b0c50 --- /dev/null +++ b/drivers/usb/phy/rcar-phy.c @@ -0,0 +1,220 @@ +/* + * Renesas R-Car USB phy driver + * + * Copyright (C) 2012 Renesas Solutions Corp. + * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/usb/otg.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/module.h> + +/* USBH common register */ +#define USBPCTRL0 0x0800 +#define USBPCTRL1 0x0804 +#define USBST 0x0808 +#define USBEH0 0x080C +#define USBOH0 0x081C +#define USBCTL0 0x0858 +#define EIIBC1 0x0094 +#define EIIBC2 0x009C + +/* USBPCTRL1 */ +#define PHY_RST (1 << 2) +#define PLL_ENB (1 << 1) +#define PHY_ENB (1 << 0) + +/* USBST */ +#define ST_ACT (1 << 31) +#define ST_PLL (1 << 30) + +struct rcar_usb_phy_priv { + struct usb_phy phy; + spinlock_t lock; + + void __iomem *reg0; + void __iomem *reg1; + int counter; +}; + +#define usb_phy_to_priv(p) container_of(p, struct rcar_usb_phy_priv, phy) + + +/* + * USB initial/install operation. + * + * This function setup USB phy. + * The used value and setting order came from + * [USB :: Initial setting] on datasheet. + */ +static int rcar_usb_phy_init(struct usb_phy *phy) +{ + struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy); + struct device *dev = phy->dev; + void __iomem *reg0 = priv->reg0; + void __iomem *reg1 = priv->reg1; + int i; + u32 val; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (priv->counter++ == 0) { + + /* + * USB phy start-up + */ + + /* (1) USB-PHY standby release */ + iowrite32(PHY_ENB, (reg0 + USBPCTRL1)); + + /* (2) start USB-PHY internal PLL */ + iowrite32(PHY_ENB | PLL_ENB, (reg0 + USBPCTRL1)); + + /* (3) USB module status check */ + for (i = 0; i < 1024; i++) { + udelay(10); + val = ioread32(reg0 + USBST); + if (val == (ST_ACT | ST_PLL)) + break; + } + + if (val != (ST_ACT | ST_PLL)) { + dev_err(dev, "USB phy not ready\n"); + goto phy_init_end; + } + + /* (4) USB-PHY reset clear */ + iowrite32(PHY_ENB | PLL_ENB | PHY_RST, (reg0 + USBPCTRL1)); + + /* set platform specific port settings */ + iowrite32(0x00000000, (reg0 + USBPCTRL0)); + + /* + * EHCI IP internal buffer setting + * EHCI IP internal buffer enable + * + * These are recommended value of a datasheet + * see [USB :: EHCI internal buffer setting] + */ + iowrite32(0x00ff0040, (reg0 + EIIBC1)); + iowrite32(0x00ff0040, (reg1 + EIIBC1)); + + iowrite32(0x00000001, (reg0 + EIIBC2)); + iowrite32(0x00000001, (reg1 + EIIBC2)); + + /* + * Bus alignment settings + */ + + /* (1) EHCI bus alignment (little endian) */ + iowrite32(0x00000000, (reg0 + USBEH0)); + + /* (1) OHCI bus alignment (little endian) */ + iowrite32(0x00000000, (reg0 + USBOH0)); + } + +phy_init_end: + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static void rcar_usb_phy_shutdown(struct usb_phy *phy) +{ + struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy); + void __iomem *reg0 = priv->reg0; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + + if (priv->counter-- == 1) { /* last user */ + iowrite32(0x00000000, (reg0 + USBPCTRL0)); + iowrite32(0x00000000, (reg0 + USBPCTRL1)); + } + + spin_unlock_irqrestore(&priv->lock, flags); +} + +static int rcar_usb_phy_probe(struct platform_device *pdev) +{ + struct rcar_usb_phy_priv *priv; + struct resource *res0, *res1; + struct device *dev = &pdev->dev; + void __iomem *reg0, *reg1; + int ret; + + res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0); + res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res0 || !res1) { + dev_err(dev, "Not enough platform resources\n"); + return -EINVAL; + } + + /* + * CAUTION + * + * Because this phy address is also mapped under OHCI/EHCI address area, + * this driver can't use devm_request_and_ioremap(dev, res) here + */ + reg0 = devm_ioremap_nocache(dev, res0->start, resource_size(res0)); + reg1 = devm_ioremap_nocache(dev, res1->start, resource_size(res1)); + if (!reg0 || !reg1) { + dev_err(dev, "ioremap error\n"); + return -ENOMEM; + } + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(dev, "priv data allocation error\n"); + return -ENOMEM; + } + + priv->reg0 = reg0; + priv->reg1 = reg1; + priv->counter = 0; + priv->phy.dev = dev; + priv->phy.label = dev_name(dev); + priv->phy.init = rcar_usb_phy_init; + priv->phy.shutdown = rcar_usb_phy_shutdown; + spin_lock_init(&priv->lock); + + ret = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2); + if (ret < 0) { + dev_err(dev, "usb phy addition error\n"); + return ret; + } + + platform_set_drvdata(pdev, priv); + + return ret; +} + +static int rcar_usb_phy_remove(struct platform_device *pdev) +{ + struct rcar_usb_phy_priv *priv = platform_get_drvdata(pdev); + + usb_remove_phy(&priv->phy); + + return 0; +} + +static struct platform_driver rcar_usb_phy_driver = { + .driver = { + .name = "rcar_usb_phy", + }, + .probe = rcar_usb_phy_probe, + .remove = rcar_usb_phy_remove, +}; + +module_platform_driver(rcar_usb_phy_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Renesas R-Car USB phy"); +MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"); diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c new file mode 100644 index 00000000000..967101ec15f --- /dev/null +++ b/drivers/usb/phy/samsung-usbphy.c @@ -0,0 +1,928 @@ +/* linux/drivers/usb/phy/samsung-usbphy.c + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Praveen Paneri <p.paneri@samsung.com> + * + * Samsung USB2.0 PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and + * OHCI-EXYNOS controllers. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/usb/otg.h> +#include <linux/usb/samsung_usb_phy.h> +#include <linux/platform_data/samsung-usbphy.h> + +/* Register definitions */ + +#define SAMSUNG_PHYPWR (0x00) + +#define PHYPWR_NORMAL_MASK (0x19 << 0) +#define PHYPWR_OTG_DISABLE (0x1 << 4) +#define PHYPWR_ANALOG_POWERDOWN (0x1 << 3) +#define PHYPWR_FORCE_SUSPEND (0x1 << 1) +/* For Exynos4 */ +#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0) +#define PHYPWR_SLEEP_PHY0 (0x1 << 5) + +#define SAMSUNG_PHYCLK (0x04) + +#define PHYCLK_MODE_USB11 (0x1 << 6) +#define PHYCLK_EXT_OSC (0x1 << 5) +#define PHYCLK_COMMON_ON_N (0x1 << 4) +#define PHYCLK_ID_PULL (0x1 << 2) +#define PHYCLK_CLKSEL_MASK (0x3 << 0) +#define PHYCLK_CLKSEL_48M (0x0 << 0) +#define PHYCLK_CLKSEL_12M (0x2 << 0) +#define PHYCLK_CLKSEL_24M (0x3 << 0) + +#define SAMSUNG_RSTCON (0x08) + +#define RSTCON_PHYLINK_SWRST (0x1 << 2) +#define RSTCON_HLINK_SWRST (0x1 << 1) +#define RSTCON_SWRST (0x1 << 0) + +/* EXYNOS5 */ +#define EXYNOS5_PHY_HOST_CTRL0 (0x00) + +#define HOST_CTRL0_PHYSWRSTALL (0x1 << 31) + +#define HOST_CTRL0_REFCLKSEL_MASK (0x3 << 19) +#define HOST_CTRL0_REFCLKSEL_XTAL (0x0 << 19) +#define HOST_CTRL0_REFCLKSEL_EXTL (0x1 << 19) +#define HOST_CTRL0_REFCLKSEL_CLKCORE (0x2 << 19) + +#define HOST_CTRL0_FSEL_MASK (0x7 << 16) +#define HOST_CTRL0_FSEL(_x) ((_x) << 16) + +#define FSEL_CLKSEL_50M (0x7) +#define FSEL_CLKSEL_24M (0x5) +#define FSEL_CLKSEL_20M (0x4) +#define FSEL_CLKSEL_19200K (0x3) +#define FSEL_CLKSEL_12M (0x2) +#define FSEL_CLKSEL_10M (0x1) +#define FSEL_CLKSEL_9600K (0x0) + +#define HOST_CTRL0_TESTBURNIN (0x1 << 11) +#define HOST_CTRL0_RETENABLE (0x1 << 10) +#define HOST_CTRL0_COMMONON_N (0x1 << 9) +#define HOST_CTRL0_SIDDQ (0x1 << 6) +#define HOST_CTRL0_FORCESLEEP (0x1 << 5) +#define HOST_CTRL0_FORCESUSPEND (0x1 << 4) +#define HOST_CTRL0_WORDINTERFACE (0x1 << 3) +#define HOST_CTRL0_UTMISWRST (0x1 << 2) +#define HOST_CTRL0_LINKSWRST (0x1 << 1) +#define HOST_CTRL0_PHYSWRST (0x1 << 0) + +#define EXYNOS5_PHY_HOST_TUNE0 (0x04) + +#define EXYNOS5_PHY_HSIC_CTRL1 (0x10) + +#define EXYNOS5_PHY_HSIC_TUNE1 (0x14) + +#define EXYNOS5_PHY_HSIC_CTRL2 (0x20) + +#define EXYNOS5_PHY_HSIC_TUNE2 (0x24) + +#define HSIC_CTRL_REFCLKSEL_MASK (0x3 << 23) +#define HSIC_CTRL_REFCLKSEL (0x2 << 23) + +#define HSIC_CTRL_REFCLKDIV_MASK (0x7f << 16) +#define HSIC_CTRL_REFCLKDIV(_x) ((_x) << 16) +#define HSIC_CTRL_REFCLKDIV_12 (0x24 << 16) +#define HSIC_CTRL_REFCLKDIV_15 (0x1c << 16) +#define HSIC_CTRL_REFCLKDIV_16 (0x1a << 16) +#define HSIC_CTRL_REFCLKDIV_19_2 (0x15 << 16) +#define HSIC_CTRL_REFCLKDIV_20 (0x14 << 16) + +#define HSIC_CTRL_SIDDQ (0x1 << 6) +#define HSIC_CTRL_FORCESLEEP (0x1 << 5) +#define HSIC_CTRL_FORCESUSPEND (0x1 << 4) +#define HSIC_CTRL_WORDINTERFACE (0x1 << 3) +#define HSIC_CTRL_UTMISWRST (0x1 << 2) +#define HSIC_CTRL_PHYSWRST (0x1 << 0) + +#define EXYNOS5_PHY_HOST_EHCICTRL (0x30) + +#define HOST_EHCICTRL_ENAINCRXALIGN (0x1 << 29) +#define HOST_EHCICTRL_ENAINCR4 (0x1 << 28) +#define HOST_EHCICTRL_ENAINCR8 (0x1 << 27) +#define HOST_EHCICTRL_ENAINCR16 (0x1 << 26) + +#define EXYNOS5_PHY_HOST_OHCICTRL (0x34) + +#define HOST_OHCICTRL_SUSPLGCY (0x1 << 3) +#define HOST_OHCICTRL_APPSTARTCLK (0x1 << 2) +#define HOST_OHCICTRL_CNTSEL (0x1 << 1) +#define HOST_OHCICTRL_CLKCKTRST (0x1 << 0) + +#define EXYNOS5_PHY_OTG_SYS (0x38) + +#define OTG_SYS_PHYLINK_SWRESET (0x1 << 14) +#define OTG_SYS_LINKSWRST_UOTG (0x1 << 13) +#define OTG_SYS_PHY0_SWRST (0x1 << 12) + +#define OTG_SYS_REFCLKSEL_MASK (0x3 << 9) +#define OTG_SYS_REFCLKSEL_XTAL (0x0 << 9) +#define OTG_SYS_REFCLKSEL_EXTL (0x1 << 9) +#define OTG_SYS_REFCLKSEL_CLKCORE (0x2 << 9) + +#define OTG_SYS_IDPULLUP_UOTG (0x1 << 8) +#define OTG_SYS_COMMON_ON (0x1 << 7) + +#define OTG_SYS_FSEL_MASK (0x7 << 4) +#define OTG_SYS_FSEL(_x) ((_x) << 4) + +#define OTG_SYS_FORCESLEEP (0x1 << 3) +#define OTG_SYS_OTGDISABLE (0x1 << 2) +#define OTG_SYS_SIDDQ_UOTG (0x1 << 1) +#define OTG_SYS_FORCESUSPEND (0x1 << 0) + +#define EXYNOS5_PHY_OTG_TUNE (0x40) + +#ifndef MHZ +#define MHZ (1000*1000) +#endif + +#ifndef KHZ +#define KHZ (1000) +#endif + +#define EXYNOS_USBHOST_PHY_CTRL_OFFSET (0x4) +#define S3C64XX_USBPHY_ENABLE (0x1 << 16) +#define EXYNOS_USBPHY_ENABLE (0x1 << 0) +#define EXYNOS_USB20PHY_CFG_HOST_LINK (0x1 << 0) + +enum samsung_cpu_type { + TYPE_S3C64XX, + TYPE_EXYNOS4210, + TYPE_EXYNOS5250, +}; + +/* + * struct samsung_usbphy_drvdata - driver data for various SoC variants + * @cpu_type: machine identifier + * @devphy_en_mask: device phy enable mask for PHY CONTROL register + * @hostphy_en_mask: host phy enable mask for PHY CONTROL register + * @devphy_reg_offset: offset to DEVICE PHY CONTROL register from + * mapped address of system controller. + * @hostphy_reg_offset: offset to HOST PHY CONTROL register from + * mapped address of system controller. + * + * Here we have a separate mask for device type phy. + * Having different masks for host and device type phy helps + * in setting independent masks in case of SoCs like S5PV210, + * in which PHY0 and PHY1 enable bits belong to same register + * placed at position 0 and 1 respectively. + * Although for newer SoCs like exynos these bits belong to + * different registers altogether placed at position 0. + */ +struct samsung_usbphy_drvdata { + int cpu_type; + int devphy_en_mask; + int hostphy_en_mask; + u32 devphy_reg_offset; + u32 hostphy_reg_offset; +}; + +/* + * struct samsung_usbphy - transceiver driver state + * @phy: transceiver structure + * @plat: platform data + * @dev: The parent device supplied to the probe function + * @clk: usb phy clock + * @regs: usb phy controller registers memory base + * @pmuregs: USB device PHY_CONTROL register memory base + * @sysreg: USB2.0 PHY_CFG register memory base + * @ref_clk_freq: reference clock frequency selection + * @drv_data: driver data available for different SoCs + * @phy_type: Samsung SoCs specific phy types: #HOST + * #DEVICE + * @phy_usage: usage count for phy + * @lock: lock for phy operations + */ +struct samsung_usbphy { + struct usb_phy phy; + struct samsung_usbphy_data *plat; + struct device *dev; + struct clk *clk; + void __iomem *regs; + void __iomem *pmuregs; + void __iomem *sysreg; + int ref_clk_freq; + const struct samsung_usbphy_drvdata *drv_data; + enum samsung_usb_phy_type phy_type; + atomic_t phy_usage; + spinlock_t lock; +}; + +#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy) + +int samsung_usbphy_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + if (!otg) + return -ENODEV; + + if (!otg->host) + otg->host = host; + + return 0; +} + +static int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy) +{ + struct device_node *usbphy_sys; + + /* Getting node for system controller interface for usb-phy */ + usbphy_sys = of_get_child_by_name(sphy->dev->of_node, "usbphy-sys"); + if (!usbphy_sys) { + dev_err(sphy->dev, "No sys-controller interface for usb-phy\n"); + return -ENODEV; + } + + sphy->pmuregs = of_iomap(usbphy_sys, 0); + + if (sphy->pmuregs == NULL) { + dev_err(sphy->dev, "Can't get usb-phy pmu control register\n"); + goto err0; + } + + sphy->sysreg = of_iomap(usbphy_sys, 1); + + /* + * Not returning error code here, since this situation is not fatal. + * Few SoCs may not have this switch available + */ + if (sphy->sysreg == NULL) + dev_warn(sphy->dev, "Can't get usb-phy sysreg cfg register\n"); + + of_node_put(usbphy_sys); + + return 0; + +err0: + of_node_put(usbphy_sys); + return -ENXIO; +} + +/* + * Set isolation here for phy. + * Here 'on = true' would mean USB PHY block is isolated, hence + * de-activated and vice-versa. + */ +static void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on) +{ + void __iomem *reg = NULL; + u32 reg_val; + u32 en_mask = 0; + + if (!sphy->pmuregs) { + dev_warn(sphy->dev, "Can't set pmu isolation\n"); + return; + } + + switch (sphy->drv_data->cpu_type) { + case TYPE_S3C64XX: + /* + * Do nothing: We will add here once S3C64xx goes for DT support + */ + break; + case TYPE_EXYNOS4210: + /* + * Fall through since exynos4210 and exynos5250 have similar + * register architecture: two separate registers for host and + * device phy control with enable bit at position 0. + */ + case TYPE_EXYNOS5250: + if (sphy->phy_type == USB_PHY_TYPE_DEVICE) { + reg = sphy->pmuregs + + sphy->drv_data->devphy_reg_offset; + en_mask = sphy->drv_data->devphy_en_mask; + } else if (sphy->phy_type == USB_PHY_TYPE_HOST) { + reg = sphy->pmuregs + + sphy->drv_data->hostphy_reg_offset; + en_mask = sphy->drv_data->hostphy_en_mask; + } + break; + default: + dev_err(sphy->dev, "Invalid SoC type\n"); + return; + } + + reg_val = readl(reg); + + if (on) + reg_val &= ~en_mask; + else + reg_val |= en_mask; + + writel(reg_val, reg); +} + +/* + * Configure the mode of working of usb-phy here: HOST/DEVICE. + */ +static void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy) +{ + u32 reg; + + if (!sphy->sysreg) { + dev_warn(sphy->dev, "Can't configure specified phy mode\n"); + return; + } + + reg = readl(sphy->sysreg); + + if (sphy->phy_type == USB_PHY_TYPE_DEVICE) + reg &= ~EXYNOS_USB20PHY_CFG_HOST_LINK; + else if (sphy->phy_type == USB_PHY_TYPE_HOST) + reg |= EXYNOS_USB20PHY_CFG_HOST_LINK; + + writel(reg, sphy->sysreg); +} + +/* + * PHYs are different for USB Device and USB Host. + * This make sure that correct PHY type is selected before + * any operation on PHY. + */ +static int samsung_usbphy_set_type(struct usb_phy *phy, + enum samsung_usb_phy_type phy_type) +{ + struct samsung_usbphy *sphy = phy_to_sphy(phy); + + sphy->phy_type = phy_type; + + return 0; +} + +/* + * Returns reference clock frequency selection value + */ +static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy) +{ + struct clk *ref_clk; + int refclk_freq = 0; + + /* + * In exynos5250 USB host and device PHY use + * external crystal clock XXTI + */ + if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) + ref_clk = clk_get(sphy->dev, "ext_xtal"); + else + ref_clk = clk_get(sphy->dev, "xusbxti"); + if (IS_ERR(ref_clk)) { + dev_err(sphy->dev, "Failed to get reference clock\n"); + return PTR_ERR(ref_clk); + } + + if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) { + /* set clock frequency for PLL */ + switch (clk_get_rate(ref_clk)) { + case 9600 * KHZ: + refclk_freq = FSEL_CLKSEL_9600K; + break; + case 10 * MHZ: + refclk_freq = FSEL_CLKSEL_10M; + break; + case 12 * MHZ: + refclk_freq = FSEL_CLKSEL_12M; + break; + case 19200 * KHZ: + refclk_freq = FSEL_CLKSEL_19200K; + break; + case 20 * MHZ: + refclk_freq = FSEL_CLKSEL_20M; + break; + case 50 * MHZ: + refclk_freq = FSEL_CLKSEL_50M; + break; + case 24 * MHZ: + default: + /* default reference clock */ + refclk_freq = FSEL_CLKSEL_24M; + break; + } + } else { + switch (clk_get_rate(ref_clk)) { + case 12 * MHZ: + refclk_freq = PHYCLK_CLKSEL_12M; + break; + case 24 * MHZ: + refclk_freq = PHYCLK_CLKSEL_24M; + break; + case 48 * MHZ: + refclk_freq = PHYCLK_CLKSEL_48M; + break; + default: + if (sphy->drv_data->cpu_type == TYPE_S3C64XX) + refclk_freq = PHYCLK_CLKSEL_48M; + else + refclk_freq = PHYCLK_CLKSEL_24M; + break; + } + } + clk_put(ref_clk); + + return refclk_freq; +} + +static bool exynos5_phyhost_is_on(void *regs) +{ + u32 reg; + + reg = readl(regs + EXYNOS5_PHY_HOST_CTRL0); + + return !(reg & HOST_CTRL0_SIDDQ); +} + +static void samsung_exynos5_usbphy_enable(struct samsung_usbphy *sphy) +{ + void __iomem *regs = sphy->regs; + u32 phyclk = sphy->ref_clk_freq; + u32 phyhost; + u32 phyotg; + u32 phyhsic; + u32 ehcictrl; + u32 ohcictrl; + + /* + * phy_usage helps in keeping usage count for phy + * so that the first consumer enabling the phy is also + * the last consumer to disable it. + */ + + atomic_inc(&sphy->phy_usage); + + if (exynos5_phyhost_is_on(regs)) { + dev_info(sphy->dev, "Already power on PHY\n"); + return; + } + + /* Host configuration */ + phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0); + + /* phy reference clock configuration */ + phyhost &= ~HOST_CTRL0_FSEL_MASK; + phyhost |= HOST_CTRL0_FSEL(phyclk); + + /* host phy reset */ + phyhost &= ~(HOST_CTRL0_PHYSWRST | + HOST_CTRL0_PHYSWRSTALL | + HOST_CTRL0_SIDDQ | + /* Enable normal mode of operation */ + HOST_CTRL0_FORCESUSPEND | + HOST_CTRL0_FORCESLEEP); + + /* Link reset */ + phyhost |= (HOST_CTRL0_LINKSWRST | + HOST_CTRL0_UTMISWRST | + /* COMMON Block configuration during suspend */ + HOST_CTRL0_COMMONON_N); + writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); + udelay(10); + phyhost &= ~(HOST_CTRL0_LINKSWRST | + HOST_CTRL0_UTMISWRST); + writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); + + /* OTG configuration */ + phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS); + + /* phy reference clock configuration */ + phyotg &= ~OTG_SYS_FSEL_MASK; + phyotg |= OTG_SYS_FSEL(phyclk); + + /* Enable normal mode of operation */ + phyotg &= ~(OTG_SYS_FORCESUSPEND | + OTG_SYS_SIDDQ_UOTG | + OTG_SYS_FORCESLEEP | + OTG_SYS_REFCLKSEL_MASK | + /* COMMON Block configuration during suspend */ + OTG_SYS_COMMON_ON); + + /* OTG phy & link reset */ + phyotg |= (OTG_SYS_PHY0_SWRST | + OTG_SYS_LINKSWRST_UOTG | + OTG_SYS_PHYLINK_SWRESET | + OTG_SYS_OTGDISABLE | + /* Set phy refclk */ + OTG_SYS_REFCLKSEL_CLKCORE); + + writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); + udelay(10); + phyotg &= ~(OTG_SYS_PHY0_SWRST | + OTG_SYS_LINKSWRST_UOTG | + OTG_SYS_PHYLINK_SWRESET); + writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); + + /* HSIC phy configuration */ + phyhsic = (HSIC_CTRL_REFCLKDIV_12 | + HSIC_CTRL_REFCLKSEL | + HSIC_CTRL_PHYSWRST); + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); + udelay(10); + phyhsic &= ~HSIC_CTRL_PHYSWRST; + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); + + udelay(80); + + /* enable EHCI DMA burst */ + ehcictrl = readl(regs + EXYNOS5_PHY_HOST_EHCICTRL); + ehcictrl |= (HOST_EHCICTRL_ENAINCRXALIGN | + HOST_EHCICTRL_ENAINCR4 | + HOST_EHCICTRL_ENAINCR8 | + HOST_EHCICTRL_ENAINCR16); + writel(ehcictrl, regs + EXYNOS5_PHY_HOST_EHCICTRL); + + /* set ohci_suspend_on_n */ + ohcictrl = readl(regs + EXYNOS5_PHY_HOST_OHCICTRL); + ohcictrl |= HOST_OHCICTRL_SUSPLGCY; + writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL); +} + +static void samsung_usbphy_enable(struct samsung_usbphy *sphy) +{ + void __iomem *regs = sphy->regs; + u32 phypwr; + u32 phyclk; + u32 rstcon; + + /* set clock frequency for PLL */ + phyclk = sphy->ref_clk_freq; + phypwr = readl(regs + SAMSUNG_PHYPWR); + rstcon = readl(regs + SAMSUNG_RSTCON); + + switch (sphy->drv_data->cpu_type) { + case TYPE_S3C64XX: + phyclk &= ~PHYCLK_COMMON_ON_N; + phypwr &= ~PHYPWR_NORMAL_MASK; + rstcon |= RSTCON_SWRST; + break; + case TYPE_EXYNOS4210: + phypwr &= ~PHYPWR_NORMAL_MASK_PHY0; + rstcon |= RSTCON_SWRST; + default: + break; + } + + writel(phyclk, regs + SAMSUNG_PHYCLK); + /* Configure PHY0 for normal operation*/ + writel(phypwr, regs + SAMSUNG_PHYPWR); + /* reset all ports of PHY and Link */ + writel(rstcon, regs + SAMSUNG_RSTCON); + udelay(10); + rstcon &= ~RSTCON_SWRST; + writel(rstcon, regs + SAMSUNG_RSTCON); +} + +static void samsung_exynos5_usbphy_disable(struct samsung_usbphy *sphy) +{ + void __iomem *regs = sphy->regs; + u32 phyhost; + u32 phyotg; + u32 phyhsic; + + if (atomic_dec_return(&sphy->phy_usage) > 0) { + dev_info(sphy->dev, "still being used\n"); + return; + } + + phyhsic = (HSIC_CTRL_REFCLKDIV_12 | + HSIC_CTRL_REFCLKSEL | + HSIC_CTRL_SIDDQ | + HSIC_CTRL_FORCESLEEP | + HSIC_CTRL_FORCESUSPEND); + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); + + phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0); + phyhost |= (HOST_CTRL0_SIDDQ | + HOST_CTRL0_FORCESUSPEND | + HOST_CTRL0_FORCESLEEP | + HOST_CTRL0_PHYSWRST | + HOST_CTRL0_PHYSWRSTALL); + writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); + + phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS); + phyotg |= (OTG_SYS_FORCESUSPEND | + OTG_SYS_SIDDQ_UOTG | + OTG_SYS_FORCESLEEP); + writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); +} + +static void samsung_usbphy_disable(struct samsung_usbphy *sphy) +{ + void __iomem *regs = sphy->regs; + u32 phypwr; + + phypwr = readl(regs + SAMSUNG_PHYPWR); + + switch (sphy->drv_data->cpu_type) { + case TYPE_S3C64XX: + phypwr |= PHYPWR_NORMAL_MASK; + break; + case TYPE_EXYNOS4210: + phypwr |= PHYPWR_NORMAL_MASK_PHY0; + default: + break; + } + + /* Disable analog and otg block power */ + writel(phypwr, regs + SAMSUNG_PHYPWR); +} + +/* + * The function passed to the usb driver for phy initialization + */ +static int samsung_usbphy_init(struct usb_phy *phy) +{ + struct samsung_usbphy *sphy; + struct usb_bus *host = NULL; + unsigned long flags; + int ret = 0; + + sphy = phy_to_sphy(phy); + + host = phy->otg->host; + + /* Enable the phy clock */ + ret = clk_prepare_enable(sphy->clk); + if (ret) { + dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); + return ret; + } + + spin_lock_irqsave(&sphy->lock, flags); + + if (host) { + /* setting default phy-type for USB 2.0 */ + if (!strstr(dev_name(host->controller), "ehci") || + !strstr(dev_name(host->controller), "ohci")) + samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST); + } else { + samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); + } + + /* Disable phy isolation */ + if (sphy->plat && sphy->plat->pmu_isolation) + sphy->plat->pmu_isolation(false); + else + samsung_usbphy_set_isolation(sphy, false); + + /* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */ + samsung_usbphy_cfg_sel(sphy); + + /* Initialize usb phy registers */ + if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) + samsung_exynos5_usbphy_enable(sphy); + else + samsung_usbphy_enable(sphy); + + spin_unlock_irqrestore(&sphy->lock, flags); + + /* Disable the phy clock */ + clk_disable_unprepare(sphy->clk); + + return ret; +} + +/* + * The function passed to the usb driver for phy shutdown + */ +static void samsung_usbphy_shutdown(struct usb_phy *phy) +{ + struct samsung_usbphy *sphy; + struct usb_bus *host = NULL; + unsigned long flags; + + sphy = phy_to_sphy(phy); + + host = phy->otg->host; + + if (clk_prepare_enable(sphy->clk)) { + dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); + return; + } + + spin_lock_irqsave(&sphy->lock, flags); + + if (host) { + /* setting default phy-type for USB 2.0 */ + if (!strstr(dev_name(host->controller), "ehci") || + !strstr(dev_name(host->controller), "ohci")) + samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST); + } else { + samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); + } + + /* De-initialize usb phy registers */ + if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) + samsung_exynos5_usbphy_disable(sphy); + else + samsung_usbphy_disable(sphy); + + /* Enable phy isolation */ + if (sphy->plat && sphy->plat->pmu_isolation) + sphy->plat->pmu_isolation(true); + else + samsung_usbphy_set_isolation(sphy, true); + + spin_unlock_irqrestore(&sphy->lock, flags); + + clk_disable_unprepare(sphy->clk); +} + +static const struct of_device_id samsung_usbphy_dt_match[]; + +static inline const struct samsung_usbphy_drvdata +*samsung_usbphy_get_driver_data(struct platform_device *pdev) +{ + if (pdev->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(samsung_usbphy_dt_match, + pdev->dev.of_node); + return match->data; + } + + return (struct samsung_usbphy_drvdata *) + platform_get_device_id(pdev)->driver_data; +} + +static int samsung_usbphy_probe(struct platform_device *pdev) +{ + struct samsung_usbphy *sphy; + struct usb_otg *otg; + struct samsung_usbphy_data *pdata = pdev->dev.platform_data; + const struct samsung_usbphy_drvdata *drv_data; + struct device *dev = &pdev->dev; + struct resource *phy_mem; + void __iomem *phy_base; + struct clk *clk; + int ret; + + phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!phy_mem) { + dev_err(dev, "%s: missing mem resource\n", __func__); + return -ENODEV; + } + + phy_base = devm_ioremap_resource(dev, phy_mem); + if (IS_ERR(phy_base)) + return PTR_ERR(phy_base); + + sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL); + if (!sphy) + return -ENOMEM; + + otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL); + if (!otg) + return -ENOMEM; + + drv_data = samsung_usbphy_get_driver_data(pdev); + + if (drv_data->cpu_type == TYPE_EXYNOS5250) + clk = devm_clk_get(dev, "usbhost"); + else + clk = devm_clk_get(dev, "otg"); + + if (IS_ERR(clk)) { + dev_err(dev, "Failed to get otg clock\n"); + return PTR_ERR(clk); + } + + sphy->dev = dev; + + if (dev->of_node) { + ret = samsung_usbphy_parse_dt(sphy); + if (ret < 0) + return ret; + } else { + if (!pdata) { + dev_err(dev, "no platform data specified\n"); + return -EINVAL; + } + } + + sphy->plat = pdata; + sphy->regs = phy_base; + sphy->clk = clk; + sphy->drv_data = drv_data; + sphy->phy.dev = sphy->dev; + sphy->phy.label = "samsung-usbphy"; + sphy->phy.init = samsung_usbphy_init; + sphy->phy.shutdown = samsung_usbphy_shutdown; + sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy); + + sphy->phy.otg = otg; + sphy->phy.otg->phy = &sphy->phy; + sphy->phy.otg->set_host = samsung_usbphy_set_host; + + spin_lock_init(&sphy->lock); + + platform_set_drvdata(pdev, sphy); + + return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2); +} + +static int samsung_usbphy_remove(struct platform_device *pdev) +{ + struct samsung_usbphy *sphy = platform_get_drvdata(pdev); + + usb_remove_phy(&sphy->phy); + + if (sphy->pmuregs) + iounmap(sphy->pmuregs); + if (sphy->sysreg) + iounmap(sphy->sysreg); + + return 0; +} + +static const struct samsung_usbphy_drvdata usbphy_s3c64xx = { + .cpu_type = TYPE_S3C64XX, + .devphy_en_mask = S3C64XX_USBPHY_ENABLE, +}; + +static const struct samsung_usbphy_drvdata usbphy_exynos4 = { + .cpu_type = TYPE_EXYNOS4210, + .devphy_en_mask = EXYNOS_USBPHY_ENABLE, + .hostphy_en_mask = EXYNOS_USBPHY_ENABLE, +}; + +static struct samsung_usbphy_drvdata usbphy_exynos5 = { + .cpu_type = TYPE_EXYNOS5250, + .hostphy_en_mask = EXYNOS_USBPHY_ENABLE, + .hostphy_reg_offset = EXYNOS_USBHOST_PHY_CTRL_OFFSET, +}; + +#ifdef CONFIG_OF +static const struct of_device_id samsung_usbphy_dt_match[] = { + { + .compatible = "samsung,s3c64xx-usbphy", + .data = &usbphy_s3c64xx, + }, { + .compatible = "samsung,exynos4210-usbphy", + .data = &usbphy_exynos4, + }, { + .compatible = "samsung,exynos5250-usbphy", + .data = &usbphy_exynos5 + }, + {}, +}; +MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match); +#endif + +static struct platform_device_id samsung_usbphy_driver_ids[] = { + { + .name = "s3c64xx-usbphy", + .driver_data = (unsigned long)&usbphy_s3c64xx, + }, { + .name = "exynos4210-usbphy", + .driver_data = (unsigned long)&usbphy_exynos4, + }, { + .name = "exynos5250-usbphy", + .driver_data = (unsigned long)&usbphy_exynos5, + }, + {}, +}; + +MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids); + +static struct platform_driver samsung_usbphy_driver = { + .probe = samsung_usbphy_probe, + .remove = samsung_usbphy_remove, + .id_table = samsung_usbphy_driver_ids, + .driver = { + .name = "samsung-usbphy", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(samsung_usbphy_dt_match), + }, +}; + +module_platform_driver(samsung_usbphy_driver); + +MODULE_DESCRIPTION("Samsung USB phy controller"); +MODULE_AUTHOR("Praveen Paneri <p.paneri@samsung.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:samsung-usbphy"); diff --git a/drivers/usb/phy/tegra_usb_phy.c b/drivers/usb/phy/tegra_usb_phy.c index 987116f9efc..5487d38481a 100644 --- a/drivers/usb/phy/tegra_usb_phy.c +++ b/drivers/usb/phy/tegra_usb_phy.c @@ -24,27 +24,17 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/of.h> #include <linux/of_gpio.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> #include <asm/mach-types.h> #include <linux/usb/tegra_usb_phy.h> -#include <mach/iomap.h> -#define ULPI_VIEWPORT 0x170 +#define TEGRA_USB_BASE 0xC5000000 +#define TEGRA_USB_SIZE SZ_16K -#define USB_PORTSC1 0x184 -#define USB_PORTSC1_PTS(x) (((x) & 0x3) << 30) -#define USB_PORTSC1_PSPD(x) (((x) & 0x3) << 26) -#define USB_PORTSC1_PHCD (1 << 23) -#define USB_PORTSC1_WKOC (1 << 22) -#define USB_PORTSC1_WKDS (1 << 21) -#define USB_PORTSC1_WKCN (1 << 20) -#define USB_PORTSC1_PTC(x) (((x) & 0xf) << 16) -#define USB_PORTSC1_PP (1 << 12) -#define USB_PORTSC1_SUSP (1 << 7) -#define USB_PORTSC1_PE (1 << 2) -#define USB_PORTSC1_CCS (1 << 0) +#define ULPI_VIEWPORT 0x170 #define USB_SUSP_CTRL 0x400 #define USB_WAKE_ON_CNNT_EN_DEV (1 << 3) @@ -206,11 +196,6 @@ static struct tegra_utmip_config utmip_default[] = { }, }; -static inline bool phy_is_ulpi(struct tegra_usb_phy *phy) -{ - return (phy->instance == 1); -} - static int utmip_pad_open(struct tegra_usb_phy *phy) { phy->pad_clk = clk_get_sys("utmip-pad", NULL); @@ -219,7 +204,7 @@ static int utmip_pad_open(struct tegra_usb_phy *phy) return PTR_ERR(phy->pad_clk); } - if (phy->instance == 0) { + if (phy->is_legacy_phy) { phy->pad_regs = phy->regs; } else { phy->pad_regs = ioremap(TEGRA_USB_BASE, TEGRA_USB_SIZE); @@ -234,7 +219,7 @@ static int utmip_pad_open(struct tegra_usb_phy *phy) static void utmip_pad_close(struct tegra_usb_phy *phy) { - if (phy->instance != 0) + if (!phy->is_legacy_phy) iounmap(phy->pad_regs); clk_put(phy->pad_clk); } @@ -303,7 +288,7 @@ static void utmi_phy_clk_disable(struct tegra_usb_phy *phy) unsigned long val; void __iomem *base = phy->regs; - if (phy->instance == 0) { + if (phy->is_legacy_phy) { val = readl(base + USB_SUSP_CTRL); val |= USB_SUSP_SET; writel(val, base + USB_SUSP_CTRL); @@ -313,13 +298,8 @@ static void utmi_phy_clk_disable(struct tegra_usb_phy *phy) val = readl(base + USB_SUSP_CTRL); val &= ~USB_SUSP_SET; writel(val, base + USB_SUSP_CTRL); - } - - if (phy->instance == 2) { - val = readl(base + USB_PORTSC1); - val |= USB_PORTSC1_PHCD; - writel(val, base + USB_PORTSC1); - } + } else + tegra_ehci_set_phcd(&phy->u_phy, true); if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0) pr_err("%s: timeout waiting for phy to stabilize\n", __func__); @@ -330,7 +310,7 @@ static void utmi_phy_clk_enable(struct tegra_usb_phy *phy) unsigned long val; void __iomem *base = phy->regs; - if (phy->instance == 0) { + if (phy->is_legacy_phy) { val = readl(base + USB_SUSP_CTRL); val |= USB_SUSP_CLR; writel(val, base + USB_SUSP_CTRL); @@ -340,13 +320,8 @@ static void utmi_phy_clk_enable(struct tegra_usb_phy *phy) val = readl(base + USB_SUSP_CTRL); val &= ~USB_SUSP_CLR; writel(val, base + USB_SUSP_CTRL); - } - - if (phy->instance == 2) { - val = readl(base + USB_PORTSC1); - val &= ~USB_PORTSC1_PHCD; - writel(val, base + USB_PORTSC1); - } + } else + tegra_ehci_set_phcd(&phy->u_phy, false); if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, USB_PHY_CLK_VALID)) @@ -363,7 +338,7 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy) val |= UTMIP_RESET; writel(val, base + USB_SUSP_CTRL); - if (phy->instance == 0) { + if (phy->is_legacy_phy) { val = readl(base + USB1_LEGACY_CTRL); val |= USB1_NO_LEGACY_MODE; writel(val, base + USB1_LEGACY_CTRL); @@ -438,16 +413,14 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy) val |= UTMIP_BIAS_PDTRK_COUNT(0x5); writel(val, base + UTMIP_BIAS_CFG1); - if (phy->instance == 0) { + if (phy->is_legacy_phy) { val = readl(base + UTMIP_SPARE_CFG0); if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) val &= ~FUSE_SETUP_SEL; else val |= FUSE_SETUP_SEL; writel(val, base + UTMIP_SPARE_CFG0); - } - - if (phy->instance == 2) { + } else { val = readl(base + USB_SUSP_CTRL); val |= UTMIP_PHY_ENABLE; writel(val, base + USB_SUSP_CTRL); @@ -457,7 +430,7 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy) val &= ~UTMIP_RESET; writel(val, base + USB_SUSP_CTRL); - if (phy->instance == 0) { + if (phy->is_legacy_phy) { val = readl(base + USB1_LEGACY_CTRL); val &= ~USB1_VBUS_SENSE_CTL_MASK; val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD; @@ -470,11 +443,8 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy) utmi_phy_clk_enable(phy); - if (phy->instance == 2) { - val = readl(base + USB_PORTSC1); - val &= ~USB_PORTSC1_PTS(~0); - writel(val, base + USB_PORTSC1); - } + if (!phy->is_legacy_phy) + tegra_ehci_set_pts(&phy->u_phy, 0); return 0; } @@ -619,10 +589,6 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy) return ret; } - val = readl(base + USB_PORTSC1); - val |= USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN; - writel(val, base + USB_PORTSC1); - val = readl(base + USB_SUSP_CTRL); val |= USB_SUSP_CLR; writel(val, base + USB_SUSP_CTRL); @@ -637,17 +603,8 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy) static int ulpi_phy_power_off(struct tegra_usb_phy *phy) { - unsigned long val; - void __iomem *base = phy->regs; struct tegra_ulpi_config *config = phy->config; - /* Clear WKCN/WKDS/WKOC wake-on events that can cause the USB - * Controller to immediately bring the ULPI PHY out of low power - */ - val = readl(base + USB_PORTSC1); - val &= ~(USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN); - writel(val, base + USB_PORTSC1); - clk_disable(phy->clk); return gpio_direction_output(config->reset_gpio, 0); } @@ -658,7 +615,7 @@ static int tegra_phy_init(struct usb_phy *x) struct tegra_ulpi_config *ulpi_config; int err; - if (phy_is_ulpi(phy)) { + if (phy->is_ulpi_phy) { ulpi_config = phy->config; phy->clk = clk_get_sys(NULL, ulpi_config->clk); if (IS_ERR(phy->clk)) { @@ -696,7 +653,7 @@ static void tegra_usb_phy_close(struct usb_phy *x) { struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); - if (phy_is_ulpi(phy)) + if (phy->is_ulpi_phy) clk_put(phy->clk); else utmip_pad_close(phy); @@ -707,7 +664,7 @@ static void tegra_usb_phy_close(struct usb_phy *x) static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy) { - if (phy_is_ulpi(phy)) + if (phy->is_ulpi_phy) return ulpi_phy_power_on(phy); else return utmi_phy_power_on(phy); @@ -715,7 +672,7 @@ static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy) static int tegra_usb_phy_power_off(struct tegra_usb_phy *phy) { - if (phy_is_ulpi(phy)) + if (phy->is_ulpi_phy) return ulpi_phy_power_off(phy); else return utmi_phy_power_off(phy); @@ -737,8 +694,9 @@ struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance, unsigned long parent_rate; int i; int err; + struct device_node *np = dev->of_node; - phy = kmalloc(sizeof(struct tegra_usb_phy), GFP_KERNEL); + phy = kzalloc(sizeof(struct tegra_usb_phy), GFP_KERNEL); if (!phy) return ERR_PTR(-ENOMEM); @@ -747,9 +705,16 @@ struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance, phy->config = config; phy->mode = phy_mode; phy->dev = dev; + phy->is_legacy_phy = + of_property_read_bool(np, "nvidia,has-legacy-mode"); + err = of_property_match_string(np, "phy_type", "ulpi"); + if (err < 0) + phy->is_ulpi_phy = false; + else + phy->is_ulpi_phy = true; if (!phy->config) { - if (phy_is_ulpi(phy)) { + if (phy->is_ulpi_phy) { pr_err("%s: ulpi phy configuration missing", __func__); err = -EINVAL; goto err0; @@ -794,45 +759,40 @@ err0: } EXPORT_SYMBOL_GPL(tegra_usb_phy_open); -void tegra_usb_phy_preresume(struct tegra_usb_phy *phy) +void tegra_usb_phy_preresume(struct usb_phy *x) { - if (!phy_is_ulpi(phy)) + struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + + if (!phy->is_ulpi_phy) utmi_phy_preresume(phy); } EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume); -void tegra_usb_phy_postresume(struct tegra_usb_phy *phy) +void tegra_usb_phy_postresume(struct usb_phy *x) { - if (!phy_is_ulpi(phy)) + struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + + if (!phy->is_ulpi_phy) utmi_phy_postresume(phy); } EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume); -void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy, +void tegra_ehci_phy_restore_start(struct usb_phy *x, enum tegra_usb_phy_port_speed port_speed) { - if (!phy_is_ulpi(phy)) + struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + + if (!phy->is_ulpi_phy) utmi_phy_restore_start(phy, port_speed); } EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start); -void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy) +void tegra_ehci_phy_restore_end(struct usb_phy *x) { - if (!phy_is_ulpi(phy)) + struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + + if (!phy->is_ulpi_phy) utmi_phy_restore_end(phy); } EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end); -void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy) -{ - if (!phy_is_ulpi(phy)) - utmi_phy_clk_disable(phy); -} -EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_disable); - -void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy) -{ - if (!phy_is_ulpi(phy)) - utmi_phy_clk_enable(phy); -} -EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_enable); diff --git a/drivers/usb/renesas_usbhs/Kconfig b/drivers/usb/renesas_usbhs/Kconfig index 6f4afa43638..29feb00d7f3 100644 --- a/drivers/usb/renesas_usbhs/Kconfig +++ b/drivers/usb/renesas_usbhs/Kconfig @@ -4,7 +4,7 @@ config USB_RENESAS_USBHS tristate 'Renesas USBHS controller' - depends on USB && USB_GADGET + depends on USB && USB_GADGET && GENERIC_HARDIRQS default n help Renesas USBHS is a discrete USB host and peripheral controller chip diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 072edc1cc55..cfd205036ab 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -14,6 +14,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * */ +#include <linux/err.h> #include <linux/io.h> #include <linux/module.h> #include <linux/pm_runtime.h> @@ -132,6 +133,11 @@ void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable) usbhs_bset(priv, SYSCFG, mask, enable ? val : 0); } +void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable) +{ + usbhs_bset(priv, SYSCFG, DPRPU, enable ? DPRPU : 0); +} + void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode) { usbhs_write(priv, TESTMODE, mode); @@ -438,11 +444,9 @@ static int usbhs_probe(struct platform_device *pdev) return -ENOMEM; } - priv->base = devm_request_and_ioremap(&pdev->dev, res); - if (!priv->base) { - dev_err(&pdev->dev, "ioremap error.\n"); - return -ENOMEM; - } + priv->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); /* * care platform info @@ -551,7 +555,7 @@ probe_end_pipe_exit: return ret; } -static int __devexit usbhs_remove(struct platform_device *pdev) +static int usbhs_remove(struct platform_device *pdev) { struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); struct renesas_usbhs_platform_info *info = pdev->dev.platform_data; @@ -631,7 +635,7 @@ static struct platform_driver renesas_usbhs_driver = { .pm = &usbhsc_pm_ops, }, .probe = usbhs_probe, - .remove = __devexit_p(usbhs_remove), + .remove = usbhs_remove, }; module_platform_driver(renesas_usbhs_driver); diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h index dddf40a59de..c69dd2fba36 100644 --- a/drivers/usb/renesas_usbhs/common.h +++ b/drivers/usb/renesas_usbhs/common.h @@ -285,6 +285,7 @@ void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data); */ void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable); void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable); +void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable); void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode); /* diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index c021b202c0f..9538f0feafe 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -163,7 +163,7 @@ static int usbhsf_pkt_handler(struct usbhs_pipe *pipe, int type) func = pkt->handler->dma_done; break; default: - dev_err(dev, "unknown pkt hander\n"); + dev_err(dev, "unknown pkt handler\n"); goto __usbhs_pkt_handler_end; } @@ -192,8 +192,8 @@ void usbhs_pkt_start(struct usbhs_pipe *pipe) /* * irq enable/disable function */ -#define usbhsf_irq_empty_ctrl(p, e) usbhsf_irq_callback_ctrl(p, bempsts, e) -#define usbhsf_irq_ready_ctrl(p, e) usbhsf_irq_callback_ctrl(p, brdysts, e) +#define usbhsf_irq_empty_ctrl(p, e) usbhsf_irq_callback_ctrl(p, irq_bempsts, e) +#define usbhsf_irq_ready_ctrl(p, e) usbhsf_irq_callback_ctrl(p, irq_brdysts, e) #define usbhsf_irq_callback_ctrl(pipe, status, enable) \ ({ \ struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); \ @@ -202,9 +202,9 @@ void usbhs_pkt_start(struct usbhs_pipe *pipe) if (!mod) \ return; \ if (enable) \ - mod->irq_##status |= status; \ + mod->status |= status; \ else \ - mod->irq_##status &= ~status; \ + mod->status &= ~status; \ usbhs_irq_callback_update(priv, mod); \ }) @@ -488,6 +488,8 @@ static int usbhsf_pio_try_push(struct usbhs_pkt *pkt, int *is_done) usbhs_pipe_data_sequence(pipe, pkt->sequence); pkt->sequence = -1; /* -1 sequence will be ignored */ + usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->length); + ret = usbhsf_fifo_select(pipe, fifo, 1); if (ret < 0) return 0; @@ -594,6 +596,7 @@ static int usbhsf_prepare_pop(struct usbhs_pkt *pkt, int *is_done) usbhs_pipe_data_sequence(pipe, pkt->sequence); pkt->sequence = -1; /* -1 sequence will be ignored */ + usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->length); usbhs_pipe_enable(pipe); usbhsf_rx_irq_ctrl(pipe, 1); @@ -795,6 +798,7 @@ static void xfer_work(struct work_struct *work) dev_dbg(dev, " %s %d (%d/ %d)\n", fifo->name, usbhs_pipe_number(pipe), pkt->length, pkt->zero); + usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->trans); usbhs_pipe_enable(pipe); usbhsf_dma_start(pipe, fifo); dma_async_issue_pending(chan); diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c index 61933a90e5b..6a030b931a3 100644 --- a/drivers/usb/renesas_usbhs/mod.c +++ b/drivers/usb/renesas_usbhs/mod.c @@ -151,7 +151,7 @@ int usbhs_mod_probe(struct usbhs_priv *priv) goto mod_init_host_err; /* irq settings */ - ret = request_irq(priv->irq, usbhs_interrupt, + ret = devm_request_irq(dev, priv->irq, usbhs_interrupt, priv->irqflags, dev_name(dev), priv); if (ret) { dev_err(dev, "irq request err\n"); @@ -172,7 +172,6 @@ void usbhs_mod_remove(struct usbhs_priv *priv) { usbhs_mod_host_remove(priv); usbhs_mod_gadget_remove(priv); - free_irq(priv->irq, priv); } /* diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 28478ce26c3..78fca978b2d 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -545,15 +545,6 @@ static int usbhsg_pipe_disable(struct usbhsg_uep *uep) return 0; } -static void usbhsg_uep_init(struct usbhsg_gpriv *gpriv) -{ - int i; - struct usbhsg_uep *uep; - - usbhsg_for_each_uep_with_dcp(uep, gpriv, i) - uep->pipe = NULL; -} - /* * * usb_ep_ops @@ -610,7 +601,12 @@ static int usbhsg_ep_disable(struct usb_ep *ep) { struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep); - return usbhsg_pipe_disable(uep); + usbhsg_pipe_disable(uep); + + uep->pipe->mod_private = NULL; + uep->pipe = NULL; + + return 0; } static struct usb_request *usbhsg_ep_alloc_request(struct usb_ep *ep, @@ -761,9 +757,8 @@ static int usbhsg_try_start(struct usbhs_priv *priv, u32 status) usbhs_pipe_init(priv, usbhsg_dma_map_ctrl); usbhs_fifo_init(priv); - usbhsg_uep_init(gpriv); - /* dcp init */ + /* dcp init instead of usbhsg_ep_enable() */ dcp->pipe = usbhs_dcp_malloc(priv); dcp->pipe->mod_private = dcp; usbhs_pipe_config_update(dcp->pipe, 0, 0, 64); @@ -825,7 +820,7 @@ static int usbhsg_try_stop(struct usbhs_priv *priv, u32 status) usbhs_sys_set_test_mode(priv, 0); usbhs_sys_function_ctrl(priv, 0); - usbhsg_pipe_disable(dcp); + usbhsg_ep_disable(&dcp->ep); dev_dbg(dev, "stop gadget\n"); @@ -883,6 +878,16 @@ static int usbhsg_get_frame(struct usb_gadget *gadget) return usbhs_frame_get_num(priv); } +static int usbhsg_pullup(struct usb_gadget *gadget, int is_on) +{ + struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); + struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); + + usbhs_sys_function_pullup(priv, is_on); + + return 0; +} + static int usbhsg_set_selfpowered(struct usb_gadget *gadget, int is_self) { struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); @@ -895,11 +900,12 @@ static int usbhsg_set_selfpowered(struct usb_gadget *gadget, int is_self) return 0; } -static struct usb_gadget_ops usbhsg_gadget_ops = { +static const struct usb_gadget_ops usbhsg_gadget_ops = { .get_frame = usbhsg_get_frame, .set_selfpowered = usbhsg_set_selfpowered, .udc_start = usbhsg_gadget_start, .udc_stop = usbhsg_gadget_stop, + .pullup = usbhsg_pullup, }; static int usbhsg_start(struct usbhs_priv *priv) @@ -987,6 +993,7 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv) */ usbhsg_for_each_uep_with_dcp(uep, gpriv, i) { uep->gpriv = gpriv; + uep->pipe = NULL; snprintf(uep->ep_name, EP_NAME_SIZE, "ep%d", i); uep->ep.name = uep->ep_name; diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index 069cd765400..b86815421c8 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -85,6 +85,7 @@ struct usbhsh_ep { struct usbhsh_device *udev; /* attached udev */ struct usb_host_endpoint *ep; struct list_head ep_list; /* list to usbhsh_device */ + unsigned int counter; /* pipe attach counter */ }; #define USBHSH_DEVICE_MAX 10 /* see DEVADDn / DCPMAXP / PIPEMAXP */ @@ -271,8 +272,12 @@ static int usbhsh_pipe_attach(struct usbhsh_hpriv *hpriv, /******************** spin lock ********************/ usbhs_lock(priv, flags); - if (unlikely(usbhsh_uep_to_pipe(uep))) { - dev_err(dev, "uep already has pipe\n"); + /* + * if uep has been attached to pipe, + * reuse it + */ + if (usbhsh_uep_to_pipe(uep)) { + ret = 0; goto usbhsh_pipe_attach_done; } @@ -320,6 +325,9 @@ static int usbhsh_pipe_attach(struct usbhsh_hpriv *hpriv, } usbhsh_pipe_attach_done: + if (0 == ret) + uep->counter++; + usbhs_unlock(priv, flags); /******************** spin unlock ******************/ @@ -346,7 +354,7 @@ static void usbhsh_pipe_detach(struct usbhsh_hpriv *hpriv, if (unlikely(!pipe)) { dev_err(dev, "uep doens't have pipe\n"); - } else { + } else if (1 == uep->counter--) { /* last user */ struct usb_host_endpoint *ep = usbhsh_uep_to_ep(uep); struct usbhsh_device *udev = usbhsh_uep_to_udev(uep); @@ -391,6 +399,7 @@ static int usbhsh_endpoint_attach(struct usbhsh_hpriv *hpriv, /* * init endpoint */ + uep->counter = 0; INIT_LIST_HEAD(&uep->ep_list); list_add_tail(&uep->ep_list, &udev->ep_list_head); @@ -652,9 +661,10 @@ static void usbhsh_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt) status = -ESHUTDOWN; urb->actual_length = pkt->actual; - usbhsh_ureq_free(hpriv, ureq); usbhsh_endpoint_sequence_save(hpriv, urb, pkt); + usbhsh_ureq_free(hpriv, ureq); + usbhsh_pipe_detach(hpriv, usbhsh_ep_to_uep(urb->ep)); usb_hcd_unlink_urb_from_ep(hcd, urb); @@ -686,9 +696,9 @@ static int usbhsh_queue_push(struct usb_hcd *hcd, } if (usb_pipein(urb->pipe)) - pipe->handler = &usbhs_fifo_pio_pop_handler; + pipe->handler = &usbhs_fifo_dma_pop_handler; else - pipe->handler = &usbhs_fifo_pio_push_handler; + pipe->handler = &usbhs_fifo_dma_push_handler; buf = (void *)(urb->transfer_buffer + urb->actual_length); len = urb->transfer_buffer_length - urb->actual_length; @@ -921,6 +931,19 @@ static int usbhsh_dcp_queue_push(struct usb_hcd *hcd, */ static int usbhsh_dma_map_ctrl(struct usbhs_pkt *pkt, int map) { + if (map) { + struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt); + struct urb *urb = ureq->urb; + + /* it can not use scatter/gather */ + if (urb->num_sgs) + return -EINVAL; + + pkt->dma = urb->transfer_dma; + if (!pkt->dma) + return -EINVAL; + } + return 0; } @@ -946,7 +969,6 @@ static int usbhsh_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *ep = urb->ep; struct usbhsh_device *new_udev = NULL; int is_dir_in = usb_pipein(urb->pipe); - int i; int ret; dev_dbg(dev, "%s (%s)\n", __func__, is_dir_in ? "in" : "out"); @@ -992,13 +1014,7 @@ static int usbhsh_urb_enqueue(struct usb_hcd *hcd, * attach pipe to endpoint * see [image of mod_host] */ - for (i = 0; i < 1024; i++) { - ret = usbhsh_pipe_attach(hpriv, urb); - if (ret < 0) - msleep(100); - else - break; - } + ret = usbhsh_pipe_attach(hpriv, urb); if (ret < 0) { dev_err(dev, "pipe attach failed\n"); goto usbhsh_urb_enqueue_error_free_endpoint; @@ -1072,8 +1088,6 @@ static void usbhsh_endpoint_disable(struct usb_hcd *hcd, static int usbhsh_hub_status_data(struct usb_hcd *hcd, char *buf) { struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd); - struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); - struct device *dev = usbhs_priv_to_dev(priv); int roothub_id = 1; /* only 1 root hub */ /* @@ -1085,8 +1099,6 @@ static int usbhsh_hub_status_data(struct usb_hcd *hcd, char *buf) else *buf = 0; - dev_dbg(dev, "%s (%02x)\n", __func__, *buf); - return !!(*buf); } diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c index 122526cfd32..7926e1c700f 100644 --- a/drivers/usb/renesas_usbhs/pipe.c +++ b/drivers/usb/renesas_usbhs/pipe.c @@ -93,6 +93,82 @@ static void usbhsp_pipe_cfg_set(struct usbhs_pipe *pipe, u16 mask, u16 val) } /* + * PIPEnTRN/PIPEnTRE functions + */ +static void usbhsp_pipe_trn_set(struct usbhs_pipe *pipe, u16 mask, u16 val) +{ + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + struct device *dev = usbhs_priv_to_dev(priv); + int num = usbhs_pipe_number(pipe); + u16 reg; + + /* + * It is impossible to calculate address, + * since PIPEnTRN addresses were mapped randomly. + */ +#define CASE_PIPExTRN(a) \ + case 0x ## a: \ + reg = PIPE ## a ## TRN; \ + break; + + switch (num) { + CASE_PIPExTRN(1); + CASE_PIPExTRN(2); + CASE_PIPExTRN(3); + CASE_PIPExTRN(4); + CASE_PIPExTRN(5); + CASE_PIPExTRN(B); + CASE_PIPExTRN(C); + CASE_PIPExTRN(D); + CASE_PIPExTRN(E); + CASE_PIPExTRN(F); + CASE_PIPExTRN(9); + CASE_PIPExTRN(A); + default: + dev_err(dev, "unknown pipe (%d)\n", num); + return; + } + __usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val); +} + +static void usbhsp_pipe_tre_set(struct usbhs_pipe *pipe, u16 mask, u16 val) +{ + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + struct device *dev = usbhs_priv_to_dev(priv); + int num = usbhs_pipe_number(pipe); + u16 reg; + + /* + * It is impossible to calculate address, + * since PIPEnTRE addresses were mapped randomly. + */ +#define CASE_PIPExTRE(a) \ + case 0x ## a: \ + reg = PIPE ## a ## TRE; \ + break; + + switch (num) { + CASE_PIPExTRE(1); + CASE_PIPExTRE(2); + CASE_PIPExTRE(3); + CASE_PIPExTRE(4); + CASE_PIPExTRE(5); + CASE_PIPExTRE(B); + CASE_PIPExTRE(C); + CASE_PIPExTRE(D); + CASE_PIPExTRE(E); + CASE_PIPExTRE(F); + CASE_PIPExTRE(9); + CASE_PIPExTRE(A); + default: + dev_err(dev, "unknown pipe (%d)\n", num); + return; + } + + __usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val); +} + +/* * PIPEBUF */ static void usbhsp_pipe_buf_set(struct usbhs_pipe *pipe, u16 mask, u16 val) @@ -264,6 +340,31 @@ int usbhs_pipe_is_stall(struct usbhs_pipe *pipe) return (int)(pid == PID_STALL10 || pid == PID_STALL11); } +void usbhs_pipe_set_trans_count_if_bulk(struct usbhs_pipe *pipe, int len) +{ + if (!usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK)) + return; + + /* + * clear and disable transfer counter for IN/OUT pipe + */ + usbhsp_pipe_tre_set(pipe, TRCLR | TRENB, TRCLR); + + /* + * Only IN direction bulk pipe can use transfer count. + * Without using this function, + * received data will break if it was large data size. + * see PIPEnTRN/PIPEnTRE for detail + */ + if (usbhs_pipe_is_dir_in(pipe)) { + int maxp = usbhs_pipe_get_maxpacket(pipe); + + usbhsp_pipe_trn_set(pipe, 0xffff, DIV_ROUND_UP(len, maxp)); + usbhsp_pipe_tre_set(pipe, TRENB, TRENB); /* enable */ + } +} + + /* * pipe setup */ diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h index 3d80c7b1fd1..b476fde955b 100644 --- a/drivers/usb/renesas_usbhs/pipe.h +++ b/drivers/usb/renesas_usbhs/pipe.h @@ -88,6 +88,7 @@ void usbhs_pipe_enable(struct usbhs_pipe *pipe); void usbhs_pipe_disable(struct usbhs_pipe *pipe); void usbhs_pipe_stall(struct usbhs_pipe *pipe); int usbhs_pipe_is_stall(struct usbhs_pipe *pipe); +void usbhs_pipe_set_trans_count_if_bulk(struct usbhs_pipe *pipe, int len); void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo); void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel, u16 epnum, u16 maxp); diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 76f46224173..17b7f9ae36a 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -4,7 +4,7 @@ menuconfig USB_SERIAL tristate "USB Serial Converter support" - depends on USB + depends on USB && TTY ---help--- Say Y here if you have a USB device that provides normal serial ports, or acts like a serial device, and you want to connect it to @@ -647,6 +647,18 @@ config USB_SERIAL_VIVOPAY_SERIAL To compile this driver as a module, choose M here: the module will be called vivopay-serial. +config USB_SERIAL_XSENS_MT + tristate "Xsens motion tracker serial interface driver" + help + Say Y here if you want to use Xsens motion trackers. + + This driver supports the new generation of motion trackers + by Xsens. Older devices can be accessed using the FTDI_SIO + driver. + + To compile this driver as a module, choose M here: the + module will be called xsens_mt. + config USB_SERIAL_ZIO tristate "ZIO Motherboard USB serial interface driver" help diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 3b3e7308d47..eaf5ca14dfe 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -61,5 +61,6 @@ obj-$(CONFIG_USB_SERIAL_VISOR) += visor.o obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o obj-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda.o obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL) += vivopay-serial.o +obj-$(CONFIG_USB_SERIAL_XSENS_MT) += xsens_mt.o obj-$(CONFIG_USB_SERIAL_ZIO) += zio.o obj-$(CONFIG_USB_SERIAL_ZTE) += zte_ev.o diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index 54e1bb6372e..6e320cec397 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -68,10 +68,6 @@ #define THROTTLED 0x01 #define ACTUALLY_THROTTLED 0x02 -/* - * Version Information - */ -#define DRIVER_VERSION "v2.0" #define DRIVER_AUTHOR "Naranjo, Manuel Francisco <naranjo.manuel@gmail.com>, Johan Hovold <jhovold@gmail.com>" #define DRIVER_DESC "AIRcable USB Driver" @@ -123,9 +119,8 @@ static int aircable_probe(struct usb_serial *serial, return 0; } -static int aircable_process_packet(struct tty_struct *tty, - struct usb_serial_port *port, int has_headers, - char *packet, int len) +static int aircable_process_packet(struct usb_serial_port *port, + int has_headers, char *packet, int len) { if (has_headers) { len -= HCI_HEADER_LENGTH; @@ -136,7 +131,7 @@ static int aircable_process_packet(struct tty_struct *tty, return 0; } - tty_insert_flip_string(tty, packet, len); + tty_insert_flip_string(&port->port, packet, len); return len; } @@ -145,28 +140,22 @@ static void aircable_process_read_urb(struct urb *urb) { struct usb_serial_port *port = urb->context; char *data = (char *)urb->transfer_buffer; - struct tty_struct *tty; int has_headers; int count; int len; int i; - tty = tty_port_tty_get(&port->port); - if (!tty) - return; - has_headers = (urb->actual_length > 2 && data[0] == RX_HEADER_0); count = 0; for (i = 0; i < urb->actual_length; i += HCI_COMPLETE_FRAME) { len = min_t(int, urb->actual_length - i, HCI_COMPLETE_FRAME); - count += aircable_process_packet(tty, port, has_headers, + count += aircable_process_packet(port, has_headers, &data[i], len); } if (count) - tty_flip_buffer_push(tty); - tty_kref_put(tty); + tty_flip_buffer_push(&port->port); } static struct usb_serial_driver aircable_device = { @@ -192,5 +181,4 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index bd50a8a41a0..cbd904b8fba 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -37,11 +37,6 @@ #include <linux/mutex.h> #include <linux/spinlock.h> -/* - * Version information - */ - -#define DRIVER_VERSION "v0.7" #define DRIVER_AUTHOR "Bart Hartgers <bart.hartgers+ark3116@gmail.com>" #define DRIVER_DESC "USB ARK3116 serial/IrDA driver" #define DRIVER_DEV_DESC "ARK3116 RS232/IrDA" @@ -679,7 +674,6 @@ static void ark3116_process_read_urb(struct urb *urb) { struct usb_serial_port *port = urb->context; struct ark3116_private *priv = usb_get_serial_port_data(port); - struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; char tty_flag = TTY_NORMAL; unsigned long flags; @@ -694,10 +688,6 @@ static void ark3116_process_read_urb(struct urb *urb) if (!urb->actual_length) return; - tty = tty_port_tty_get(&port->port); - if (!tty) - return; - if (lsr & UART_LSR_BRK_ERROR_BITS) { if (lsr & UART_LSR_BI) tty_flag = TTY_BREAK; @@ -708,12 +698,11 @@ static void ark3116_process_read_urb(struct urb *urb) /* overrun is special, not associated with a char */ if (lsr & UART_LSR_OE) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); } - tty_insert_flip_string_fixed_flag(tty, data, tty_flag, + tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag, urb->actual_length); - tty_flip_buffer_push(tty); - tty_kref_put(tty); + tty_flip_buffer_push(&port->port); } static struct usb_serial_driver ark3116_device = { diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index ea29556f0d7..84217e78ded 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -37,10 +37,6 @@ #include <linux/usb/serial.h> #include "belkin_sa.h" -/* - * Version Information - */ -#define DRIVER_VERSION "v1.3" #define DRIVER_AUTHOR "William Greathouse <wgreathouse@smva.com>" #define DRIVER_DESC "USB Belkin Serial converter driver" @@ -246,7 +242,6 @@ static void belkin_sa_process_read_urb(struct urb *urb) { struct usb_serial_port *port = urb->context; struct belkin_sa_private *priv = usb_get_serial_port_data(port); - struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; unsigned long flags; unsigned char status; @@ -263,10 +258,6 @@ static void belkin_sa_process_read_urb(struct urb *urb) if (!urb->actual_length) return; - tty = tty_port_tty_get(&port->port); - if (!tty) - return; - if (status & BELKIN_SA_LSR_ERR) { /* Break takes precedence over parity, which takes precedence * over framing errors. */ @@ -280,13 +271,12 @@ static void belkin_sa_process_read_urb(struct urb *urb) /* Overrun is special, not associated with a char. */ if (status & BELKIN_SA_LSR_OE) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); } - tty_insert_flip_string_fixed_flag(tty, data, tty_flag, + tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag, urb->actual_length); - tty_flip_buffer_push(tty); - tty_kref_put(tty); + tty_flip_buffer_push(&port->port); } static void belkin_sa_set_termios(struct tty_struct *tty, @@ -509,5 +499,4 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index c15f2e7cefc..37decb13d7e 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -121,7 +121,6 @@ static int usb_serial_device_remove(struct device *dev) return retval; } -#ifdef CONFIG_HOTPLUG static ssize_t store_new_id(struct device_driver *driver, const char *buf, size_t count) { @@ -159,15 +158,6 @@ static void free_dynids(struct usb_serial_driver *drv) spin_unlock(&drv->dynids.lock); } -#else -static struct driver_attribute drv_attrs[] = { - __ATTR_NULL, -}; -static inline void free_dynids(struct usb_serial_driver *drv) -{ -} -#endif - struct bus_type usb_serial_bus_type = { .name = "usb-serial", .match = usb_serial_device_match, diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index eb033fc92a1..4747d1c328f 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -24,10 +24,6 @@ #include <linux/uaccess.h> #include <linux/usb/serial.h> -/* - * Version Information - */ -#define DRIVER_VERSION "v0.09" #define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver" /* @@ -35,8 +31,7 @@ */ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *); static void cp210x_close(struct usb_serial_port *); -static void cp210x_get_termios(struct tty_struct *, - struct usb_serial_port *port); +static void cp210x_get_termios(struct tty_struct *, struct usb_serial_port *); static void cp210x_get_termios_port(struct usb_serial_port *port, unsigned int *cflagp, unsigned int *baudp); static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *, @@ -65,6 +60,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */ { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */ { USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */ + { USB_DEVICE(0x0FDE, 0xCA05) }, /* OWL Wireless Electricity Monitor CM-160 */ { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */ { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */ { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */ @@ -89,6 +85,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */ { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */ { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */ + { USB_DEVICE(0x2405, 0x0003) }, /* West Mountain Radio RIGblaster Advantage */ { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */ { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */ { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */ @@ -118,6 +115,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */ { USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */ { USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */ + { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */ { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */ { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ @@ -153,6 +151,25 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */ { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */ { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */ + { USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */ + { USB_DEVICE(0x1FB9, 0x0200) }, /* Lake Shore Model 218A Temperature Monitor */ + { USB_DEVICE(0x1FB9, 0x0201) }, /* Lake Shore Model 219 Temperature Monitor */ + { USB_DEVICE(0x1FB9, 0x0202) }, /* Lake Shore Model 233 Temperature Transmitter */ + { USB_DEVICE(0x1FB9, 0x0203) }, /* Lake Shore Model 235 Temperature Transmitter */ + { USB_DEVICE(0x1FB9, 0x0300) }, /* Lake Shore Model 335 Temperature Controller */ + { USB_DEVICE(0x1FB9, 0x0301) }, /* Lake Shore Model 336 Temperature Controller */ + { USB_DEVICE(0x1FB9, 0x0302) }, /* Lake Shore Model 350 Temperature Controller */ + { USB_DEVICE(0x1FB9, 0x0303) }, /* Lake Shore Model 371 AC Bridge */ + { USB_DEVICE(0x1FB9, 0x0400) }, /* Lake Shore Model 411 Handheld Gaussmeter */ + { USB_DEVICE(0x1FB9, 0x0401) }, /* Lake Shore Model 425 Gaussmeter */ + { USB_DEVICE(0x1FB9, 0x0402) }, /* Lake Shore Model 455A Gaussmeter */ + { USB_DEVICE(0x1FB9, 0x0403) }, /* Lake Shore Model 475A Gaussmeter */ + { USB_DEVICE(0x1FB9, 0x0404) }, /* Lake Shore Model 465 Three Axis Gaussmeter */ + { USB_DEVICE(0x1FB9, 0x0600) }, /* Lake Shore Model 625A Superconducting MPS */ + { USB_DEVICE(0x1FB9, 0x0601) }, /* Lake Shore Model 642A Magnet Power Supply */ + { USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */ + { USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */ + { USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */ { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */ { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */ { USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */ @@ -169,7 +186,7 @@ struct cp210x_serial_private { static struct usb_serial_driver cp210x_device = { .driver = { .owner = THIS_MODULE, - .name = "cp210x", + .name = "cp210x", }, .id_table = id_table, .num_ports = 1, @@ -179,7 +196,7 @@ static struct usb_serial_driver cp210x_device = { .close = cp210x_close, .break_ctl = cp210x_break_ctl, .set_termios = cp210x_set_termios, - .tiocmget = cp210x_tiocmget, + .tiocmget = cp210x_tiocmget, .tiocmset = cp210x_tiocmset, .attach = cp210x_startup, .release = cp210x_release, @@ -281,7 +298,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request, int result, i, length; /* Number of integers required to contain the array */ - length = (((size - 1) | 3) + 1)/4; + length = (((size - 1) | 3) + 1) / 4; buf = kcalloc(length, sizeof(__le32), GFP_KERNEL); if (!buf) { @@ -328,12 +345,11 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request, int result, i, length; /* Number of integers required to contain the array */ - length = (((size - 1) | 3) + 1)/4; + length = (((size - 1) | 3) + 1) / 4; buf = kmalloc(length * sizeof(__le32), GFP_KERNEL); if (!buf) { - dev_err(&port->dev, "%s - out of memory.\n", - __func__); + dev_err(&port->dev, "%s - out of memory.\n", __func__); return -ENOMEM; } @@ -384,7 +400,8 @@ static inline int cp210x_set_config_single(struct usb_serial_port *port, * cp210x_quantise_baudrate * Quantises the baud rate as per AN205 Table 1 */ -static unsigned int cp210x_quantise_baudrate(unsigned int baud) { +static unsigned int cp210x_quantise_baudrate(unsigned int baud) +{ if (baud <= 300) baud = 300; else if (baud <= 600) baud = 600; @@ -467,9 +484,7 @@ static void cp210x_get_termios(struct tty_struct *tty, cp210x_get_termios_port(tty->driver_data, &tty->termios.c_cflag, &baud); tty_encode_baud_rate(tty, baud, baud); - } - - else { + } else { unsigned int cflag; cflag = 0; cp210x_get_termios_port(port, &cflag, &baud); @@ -693,8 +708,8 @@ static void cp210x_set_termios(struct tty_struct *tty, break;*/ default: dev_dbg(dev, "cp210x driver does not support the number of bits requested, using 8 bit mode\n"); - bits |= BITS_DATA_8; - break; + bits |= BITS_DATA_8; + break; } if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dev_dbg(dev, "Number of data bits requested not supported by device\n"); @@ -767,7 +782,7 @@ static void cp210x_set_termios(struct tty_struct *tty, } -static int cp210x_tiocmset (struct tty_struct *tty, +static int cp210x_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; @@ -809,7 +824,7 @@ static void cp210x_dtr_rts(struct usb_serial_port *p, int on) cp210x_tiocmset_port(p, 0, TIOCM_DTR|TIOCM_RTS); } -static int cp210x_tiocmget (struct tty_struct *tty) +static int cp210x_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; unsigned int control; @@ -829,7 +844,7 @@ static int cp210x_tiocmget (struct tty_struct *tty) return result; } -static void cp210x_break_ctl (struct tty_struct *tty, int break_state) +static void cp210x_break_ctl(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; unsigned int state; @@ -874,5 +889,4 @@ static void cp210x_release(struct usb_serial *serial) module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 4ee77dcbe69..629bd289450 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -43,10 +43,6 @@ #define CYBERJACK_LOCAL_BUF_SIZE 32 -/* - * Version Information - */ -#define DRIVER_VERSION "v1.01" #define DRIVER_AUTHOR "Matthias Bruestle" #define DRIVER_DESC "REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver" @@ -328,7 +324,6 @@ static void cyberjack_read_bulk_callback(struct urb *urb) struct usb_serial_port *port = urb->context; struct cyberjack_private *priv = usb_get_serial_port_data(port); struct device *dev = &port->dev; - struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; short todo; int result; @@ -341,16 +336,10 @@ static void cyberjack_read_bulk_callback(struct urb *urb) return; } - tty = tty_port_tty_get(&port->port); - if (!tty) { - dev_dbg(dev, "%s - ignoring since device not open\n", __func__); - return; - } if (urb->actual_length) { - tty_insert_flip_string(tty, data, urb->actual_length); - tty_flip_buffer_push(tty); + tty_insert_flip_string(&port->port, data, urb->actual_length); + tty_flip_buffer_push(&port->port); } - tty_kref_put(tty); spin_lock(&priv->lock); @@ -441,5 +430,4 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index f0da1279c11..8efa19d0e9f 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -50,10 +50,6 @@ static bool stats; static int interval; static bool unstable_bauds; -/* - * Version Information - */ -#define DRIVER_VERSION "v1.10" #define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>" #define DRIVER_DESC "Cypress USB to Serial Driver" @@ -1218,10 +1214,10 @@ static void cypress_read_int_callback(struct urb *urb) spin_unlock_irqrestore(&priv->lock, flags); /* process read if there is data other than line status */ - if (tty && bytes > i) { - tty_insert_flip_string_fixed_flag(tty, data + i, + if (bytes > i) { + tty_insert_flip_string_fixed_flag(&port->port, data + i, tty_flag, bytes - i); - tty_flip_buffer_push(tty); + tty_flip_buffer_push(&port->port); } spin_lock_irqsave(&priv->lock, flags); @@ -1303,7 +1299,6 @@ module_usb_serial_driver(serial_drivers, id_table_combined); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); module_param(stats, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index b50fa1c6d88..ebe45fa0ed5 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -32,10 +32,6 @@ /* Defines */ -/* - * Version Information - */ -#define DRIVER_VERSION "v1.80.1.2" #define DRIVER_AUTHOR "Peter Berger <pberger@brimson.com>, Al Borchers <borchers@steinerpoint.com>" #define DRIVER_DESC "Digi AccelePort USB-2/USB-4 Serial Converter driver" @@ -1403,9 +1399,7 @@ static void digi_read_bulk_callback(struct urb *urb) static int digi_read_inb_callback(struct urb *urb) { - struct usb_serial_port *port = urb->context; - struct tty_struct *tty; struct digi_port *priv = usb_get_serial_port_data(port); int opcode = ((unsigned char *)urb->transfer_buffer)[0]; int len = ((unsigned char *)urb->transfer_buffer)[1]; @@ -1429,7 +1423,6 @@ static int digi_read_inb_callback(struct urb *urb) return -1; } - tty = tty_port_tty_get(&port->port); spin_lock(&priv->dp_port_lock); /* check for throttle; if set, do not resubmit read urb */ @@ -1439,13 +1432,13 @@ static int digi_read_inb_callback(struct urb *urb) priv->dp_throttle_restart = 1; /* receive data */ - if (tty && opcode == DIGI_CMD_RECEIVE_DATA) { + if (opcode == DIGI_CMD_RECEIVE_DATA) { /* get flag from port_status */ flag = 0; /* overrun is special, not associated with a char */ if (port_status & DIGI_OVERRUN_ERROR) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); /* break takes precedence over parity, */ /* which takes precedence over framing errors */ @@ -1459,13 +1452,12 @@ static int digi_read_inb_callback(struct urb *urb) /* data length is len-1 (one byte of len is port_status) */ --len; if (len > 0) { - tty_insert_flip_string_fixed_flag(tty, data, flag, - len); - tty_flip_buffer_push(tty); + tty_insert_flip_string_fixed_flag(&port->port, data, + flag, len); + tty_flip_buffer_push(&port->port); } } spin_unlock(&priv->dp_port_lock); - tty_kref_put(tty); if (opcode == DIGI_CMD_RECEIVE_DISABLE) dev_dbg(&port->dev, "%s: got RECEIVE_DISABLE\n", __func__); diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 43ede4a1e12..0f658618db1 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -28,10 +28,6 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -/* - * Version Information - */ -#define DRIVER_VERSION "v1.3" #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Gary Brubaker <xavyer@ix.netcom.com>" #define DRIVER_DESC "USB Empeg Mark I/II Driver" diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index 6e4eb57d017..b1b2dc64b50 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -100,7 +100,6 @@ static void f81232_process_read_urb(struct urb *urb) { struct usb_serial_port *port = urb->context; struct f81232_private *priv = usb_get_serial_port_data(port); - struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; char tty_flag = TTY_NORMAL; unsigned long flags; @@ -117,10 +116,6 @@ static void f81232_process_read_urb(struct urb *urb) if (!urb->actual_length) return; - tty = tty_port_tty_get(&port->port); - if (!tty) - return; - /* break takes precedence over parity, */ /* which takes precedence over framing errors */ if (line_status & UART_BREAK_ERROR) @@ -133,19 +128,19 @@ static void f81232_process_read_urb(struct urb *urb) /* overrun is special, not associated with a char */ if (line_status & UART_OVERRUN_ERROR) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); if (port->port.console && port->sysrq) { for (i = 0; i < urb->actual_length; ++i) if (!usb_serial_handle_sysrq_char(port, data[i])) - tty_insert_flip_char(tty, data[i], tty_flag); + tty_insert_flip_char(&port->port, data[i], + tty_flag); } else { - tty_insert_flip_string_fixed_flag(tty, data, tty_flag, + tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag, urb->actual_length); } - tty_flip_buffer_push(tty); - tty_kref_put(tty); + tty_flip_buffer_push(&port->port); } static int set_control_lines(struct usb_device *dev, u8 value) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index be845873e23..edd162df49c 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -73,7 +73,6 @@ struct ftdi_private { char prev_status; /* Used for TIOCMIWAIT */ bool dev_gone; /* Used to abort TIOCMIWAIT */ char transmit_empty; /* If transmitter is empty or not */ - struct usb_serial_port *port; __u16 interface; /* FT2232C, FT2232H or FT4232H port interface (0 for FT232/245) */ @@ -192,6 +191,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) }, { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) }, { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) }, + { USB_DEVICE(NEWPORT_VID, NEWPORT_AGILIS_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) }, @@ -584,6 +584,7 @@ static struct usb_device_id id_table_combined [] = { /* * ELV devices: */ + { USB_DEVICE(FTDI_ELV_VID, FTDI_ELV_WS300_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) }, @@ -670,6 +671,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) }, { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) }, { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_OMNI1509) }, { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) }, @@ -875,6 +877,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) }, + /* Crucible Devices */ + { USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; @@ -923,6 +927,9 @@ static int ftdi_get_icount(struct tty_struct *tty, static int ftdi_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void ftdi_break_ctl(struct tty_struct *tty, int break_state); +static int ftdi_chars_in_buffer(struct tty_struct *tty); +static int ftdi_get_modem_status(struct tty_struct *tty, + unsigned char status[2]); static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base); static unsigned short int ftdi_232am_baud_to_divisor(int baud); @@ -957,6 +964,7 @@ static struct usb_serial_driver ftdi_sio_device = { .ioctl = ftdi_ioctl, .set_termios = ftdi_set_termios, .break_ctl = ftdi_break_ctl, + .chars_in_buffer = ftdi_chars_in_buffer, }; static struct usb_serial_driver * const serial_drivers[] = { @@ -1090,6 +1098,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, __func__, (set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged", (set & TIOCM_RTS) ? "HIGH" : (clear & TIOCM_RTS) ? "LOW" : "unchanged"); + rv = usb_translate_errors(rv); } else { dev_dbg(dev, "%s - DTR %s, RTS %s\n", __func__, (set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged", @@ -1682,7 +1691,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) kref_init(&priv->kref); mutex_init(&priv->cfg_lock); - memset(&priv->icount, 0x00, sizeof(priv->icount)); init_waitqueue_head(&priv->delta_msr_wait); priv->flags = ASYNC_LOW_LATENCY; @@ -1691,7 +1699,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) if (quirk && quirk->port_probe) quirk->port_probe(priv); - priv->port = port; usb_set_serial_port_data(port, priv); ftdi_determine_type(port); @@ -1781,7 +1788,7 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial) struct usb_device *udev = serial->dev; if ((udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) || - (udev->product && !strcmp(udev->product, "BeagleBone/XDS100"))) + (udev->product && !strcmp(udev->product, "BeagleBone/XDS100V2"))) return ftdi_jtag_probe(serial); return 0; @@ -1879,24 +1886,22 @@ static void ftdi_dtr_rts(struct usb_serial_port *port, int on) { struct ftdi_private *priv = usb_get_serial_port_data(port); - mutex_lock(&port->serial->disc_mutex); - if (!port->serial->disconnected) { - /* Disable flow control */ - if (!on && usb_control_msg(port->serial->dev, + /* Disable flow control */ + if (!on) { + if (usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0, priv->interface, NULL, 0, WDR_TIMEOUT) < 0) { - dev_err(&port->dev, "error from flowcontrol urb\n"); + dev_err(&port->dev, "error from flowcontrol urb\n"); } - /* drop RTS and DTR */ - if (on) - set_mctrl(port, TIOCM_DTR | TIOCM_RTS); - else - clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); } - mutex_unlock(&port->serial->disc_mutex); + /* drop RTS and DTR */ + if (on) + set_mctrl(port, TIOCM_DTR | TIOCM_RTS); + else + clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); } /* @@ -1955,9 +1960,8 @@ static int ftdi_prepare_write_buffer(struct usb_serial_port *port, #define FTDI_RS_ERR_MASK (FTDI_RS_BI | FTDI_RS_PE | FTDI_RS_FE | FTDI_RS_OE) -static int ftdi_process_packet(struct tty_struct *tty, - struct usb_serial_port *port, struct ftdi_private *priv, - char *packet, int len) +static int ftdi_process_packet(struct usb_serial_port *port, + struct ftdi_private *priv, char *packet, int len) { int i; char status; @@ -2007,7 +2011,7 @@ static int ftdi_process_packet(struct tty_struct *tty, /* Overrun is special, not associated with a char */ if (packet[1] & FTDI_RS_OE) { priv->icount.overrun++; - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); } } @@ -2026,10 +2030,10 @@ static int ftdi_process_packet(struct tty_struct *tty, if (port->port.console && port->sysrq) { for (i = 0; i < len; i++, ch++) { if (!usb_serial_handle_sysrq_char(port, *ch)) - tty_insert_flip_char(tty, *ch, flag); + tty_insert_flip_char(&port->port, *ch, flag); } } else { - tty_insert_flip_string_fixed_flag(tty, ch, flag, len); + tty_insert_flip_string_fixed_flag(&port->port, ch, flag, len); } return len; @@ -2038,25 +2042,19 @@ static int ftdi_process_packet(struct tty_struct *tty, static void ftdi_process_read_urb(struct urb *urb) { struct usb_serial_port *port = urb->context; - struct tty_struct *tty; struct ftdi_private *priv = usb_get_serial_port_data(port); char *data = (char *)urb->transfer_buffer; int i; int len; int count = 0; - tty = tty_port_tty_get(&port->port); - if (!tty) - return; - for (i = 0; i < urb->actual_length; i += priv->max_packet_size) { len = min_t(int, urb->actual_length - i, priv->max_packet_size); - count += ftdi_process_packet(tty, port, priv, &data[i], len); + count += ftdi_process_packet(port, priv, &data[i], len); } if (count) - tty_flip_buffer_push(tty); - tty_kref_put(tty); + tty_flip_buffer_push(&port->port); } static void ftdi_break_ctl(struct tty_struct *tty, int break_state) @@ -2089,6 +2087,29 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state) } +static int ftdi_chars_in_buffer(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + int chars; + unsigned char buf[2]; + int ret; + + chars = usb_serial_generic_chars_in_buffer(tty); + if (chars) + goto out; + + /* Check if hardware buffer is empty. */ + ret = ftdi_get_modem_status(tty, buf); + if (ret == 2) { + if (!(buf[1] & FTDI_RS_TEMT)) + chars = 1; + } +out: + dev_dbg(&port->dev, "%s - %d\n", __func__, chars); + + return chars; +} + /* old_termios contains the original termios settings and tty->termios contains * the new setting to be used * WARNING: set_termios calls this with old_termios in kernel space @@ -2272,7 +2293,14 @@ no_c_cflag_changes: } } -static int ftdi_tiocmget(struct tty_struct *tty) +/* + * Get modem-control status. + * + * Returns the number of status bytes retrieved (device dependant), or + * negative error code. + */ +static int ftdi_get_modem_status(struct tty_struct *tty, + unsigned char status[2]) { struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); @@ -2312,16 +2340,43 @@ static int ftdi_tiocmget(struct tty_struct *tty) FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, 0, priv->interface, buf, len, WDR_TIMEOUT); - if (ret < 0) + if (ret < 0) { + dev_err(&port->dev, "failed to get modem status: %d\n", ret); + ret = usb_translate_errors(ret); goto out; + } - ret = (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) | - (buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) | - (buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) | - (buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0) | - priv->last_dtr_rts; + status[0] = buf[0]; + if (ret > 1) + status[1] = buf[1]; + else + status[1] = 0; + + dev_dbg(&port->dev, "%s - 0x%02x%02x\n", __func__, status[0], + status[1]); out: kfree(buf); + + return ret; +} + +static int ftdi_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct ftdi_private *priv = usb_get_serial_port_data(port); + unsigned char buf[2]; + int ret; + + ret = ftdi_get_modem_status(tty, buf); + if (ret < 0) + return ret; + + ret = (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) | + (buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) | + (buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) | + (buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0) | + priv->last_dtr_rts; + return ret; } diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 57c12ef6625..9d359e189a6 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -147,6 +147,11 @@ #define XSENS_CONVERTER_6_PID 0xD38E #define XSENS_CONVERTER_7_PID 0xD38F +/** + * Zolix (www.zolix.com.cb) product ids + */ +#define FTDI_OMNI1509 0xD491 /* Omni1509 embedded USB-serial */ + /* * NDI (www.ndigital.com) product ids */ @@ -204,7 +209,7 @@ /* * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). - * All of these devices use FTDI's vendor ID (0x0403). + * Almost all of these devices use FTDI's vendor ID (0x0403). * Further IDs taken from ELV Windows .inf file. * * The previously included PID for the UO 100 module was incorrect. @@ -212,6 +217,8 @@ * * Armin Laeuger originally sent the PID for the UM 100 module. */ +#define FTDI_ELV_VID 0x1B1F /* ELV AG */ +#define FTDI_ELV_WS300_PID 0xC006 /* eQ3 WS 300 PC II */ #define FTDI_ELV_USR_PID 0xE000 /* ELV Universal-Sound-Recorder */ #define FTDI_ELV_MSM1_PID 0xE001 /* ELV Mini-Sound-Modul */ #define FTDI_ELV_KL100_PID 0xE002 /* ELV Kfz-Leistungsmesser KL 100 */ @@ -752,6 +759,12 @@ #define TTI_VID 0x103E /* Vendor Id */ #define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ +/* + * Newport Cooperation (www.newport.com) + */ +#define NEWPORT_VID 0x104D +#define NEWPORT_AGILIS_PID 0x3000 + /* Interbiometrics USB I/O Board */ /* Developed for Interbiometrics by Rudolf Gugler */ #define INTERBIOMETRICS_VID 0x1209 @@ -1253,3 +1266,9 @@ * ATI command output: Cinterion MC55i */ #define FTDI_CINTERION_MC55I_PID 0xA951 + +/* + * Product: Comet Caller ID decoder + * Manufacturer: Crucible Technologies + */ +#define FTDI_CT_COMET_PID 0x8e08 diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 203358d7e7b..1a07b12ef34 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -252,14 +252,11 @@ static inline int isAbortTrfCmnd(const unsigned char *buf) static void send_to_tty(struct usb_serial_port *port, char *data, unsigned int actual_length) { - struct tty_struct *tty = tty_port_tty_get(&port->port); - - if (tty && actual_length) { + if (actual_length) { usb_serial_debug_data(&port->dev, __func__, actual_length, data); - tty_insert_flip_string(tty, data, actual_length); - tty_flip_buffer_push(tty); + tty_insert_flip_string(&port->port, data, actual_length); + tty_flip_buffer_push(&port->port); } - tty_kref_put(tty); } diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 296612153ea..4c5c23f1cae 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -262,6 +262,7 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty) dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } +EXPORT_SYMBOL_GPL(usb_serial_generic_chars_in_buffer); static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port, int index, gfp_t mem_flags) @@ -312,30 +313,24 @@ EXPORT_SYMBOL_GPL(usb_serial_generic_submit_read_urbs); void usb_serial_generic_process_read_urb(struct urb *urb) { struct usb_serial_port *port = urb->context; - struct tty_struct *tty; char *ch = (char *)urb->transfer_buffer; int i; if (!urb->actual_length) return; - tty = tty_port_tty_get(&port->port); - if (!tty) - return; - /* The per character mucking around with sysrq path it too slow for stuff like 3G modems, so shortcircuit it in the 99.9999999% of cases where the USB serial is not a console anyway */ if (!port->port.console || !port->sysrq) - tty_insert_flip_string(tty, ch, urb->actual_length); + tty_insert_flip_string(&port->port, ch, urb->actual_length); else { for (i = 0; i < urb->actual_length; i++, ch++) { if (!usb_serial_handle_sysrq_char(port, *ch)) - tty_insert_flip_char(tty, *ch, TTY_NORMAL); + tty_insert_flip_char(&port->port, *ch, TTY_NORMAL); } } - tty_flip_buffer_push(tty); - tty_kref_put(tty); + tty_flip_buffer_push(&port->port); } EXPORT_SYMBOL_GPL(usb_serial_generic_process_read_urb); diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index 0bbaf21a9d1..2cba60d90c7 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -20,10 +20,6 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -/* - * Version Information - */ -#define DRIVER_VERSION "v1.00" #define DRIVER_DESC "HP4x (48/49) Generic Serial driver" #define HP_VENDOR_ID 0x03f0 @@ -52,5 +48,4 @@ static struct usb_serial_driver * const serial_drivers[] = { module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 5acc0d13864..b00e5cbf741 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -51,10 +51,6 @@ #include "io_ionsp.h" /* info for the iosp messages */ #include "io_16654.h" /* 16654 UART defines */ -/* - * Version Information - */ -#define DRIVER_VERSION "v2.7" #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli" #define DRIVER_DESC "Edgeport USB Serial Driver" @@ -236,8 +232,8 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial, unsigned char *buffer, __u16 bufferLength); static void process_rcvd_status(struct edgeport_serial *edge_serial, __u8 byte2, __u8 byte3); -static void edge_tty_recv(struct device *dev, struct tty_struct *tty, - unsigned char *data, int length); +static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data, + int length); static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr); static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, __u8 lsr, __u8 data); @@ -1756,7 +1752,6 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial, struct device *dev = &edge_serial->serial->dev->dev; struct usb_serial_port *port; struct edgeport_port *edge_port; - struct tty_struct *tty; __u16 lastBufferLength; __u16 rxLen; @@ -1864,14 +1859,11 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial, edge_serial->rxPort]; edge_port = usb_get_serial_port_data(port); if (edge_port->open) { - tty = tty_port_tty_get( - &edge_port->port->port); - if (tty) { - dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n", - __func__, rxLen, edge_serial->rxPort); - edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen); - tty_kref_put(tty); - } + dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n", + __func__, rxLen, + edge_serial->rxPort); + edge_tty_recv(edge_port->port, buffer, + rxLen); edge_port->icount.rx += rxLen; } buffer += rxLen; @@ -2021,20 +2013,20 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, * edge_tty_recv * this function passes data on to the tty flip buffer *****************************************************************************/ -static void edge_tty_recv(struct device *dev, struct tty_struct *tty, - unsigned char *data, int length) +static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data, + int length) { int cnt; - cnt = tty_insert_flip_string(tty, data, length); + cnt = tty_insert_flip_string(&port->port, data, length); if (cnt < length) { - dev_err(dev, "%s - dropping data, %d bytes lost\n", + dev_err(&port->dev, "%s - dropping data, %d bytes lost\n", __func__, length - cnt); } data += cnt; length -= cnt; - tty_flip_buffer_push(tty); + tty_flip_buffer_push(&port->port); } @@ -2090,14 +2082,9 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, } /* Place LSR data byte into Rx buffer */ - if (lsrData) { - struct tty_struct *tty = - tty_port_tty_get(&edge_port->port->port); - if (tty) { - edge_tty_recv(&edge_port->port->dev, tty, &data, 1); - tty_kref_put(tty); - } - } + if (lsrData) + edge_tty_recv(edge_port->port, &data, 1); + /* update input line counters */ icount = &edge_port->icount; if (newLsr & LSR_BREAK) diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 60023c2d2a3..c23776679f7 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -40,10 +40,6 @@ #include "io_usbvend.h" #include "io_ti.h" -/* - * Version Information - */ -#define DRIVER_VERSION "v0.7mode043006" #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli" #define DRIVER_DESC "Edgeport USB Serial Driver" @@ -205,8 +201,8 @@ static int closing_wait = EDGE_CLOSING_WAIT; static bool ignore_cpu_rev; static int default_uart_mode; /* RS232 */ -static void edge_tty_recv(struct device *dev, struct tty_struct *tty, - unsigned char *data, int length); +static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data, + int length); static void stop_read(struct edgeport_port *edge_port); static int restart_read(struct edgeport_port *edge_port); @@ -525,62 +521,6 @@ exit_is_tx_active: return bytes_left; } -static void chase_port(struct edgeport_port *port, unsigned long timeout, - int flush) -{ - int baud_rate; - struct tty_struct *tty = tty_port_tty_get(&port->port->port); - struct usb_serial *serial = port->port->serial; - wait_queue_t wait; - unsigned long flags; - - if (!timeout) - timeout = (HZ * EDGE_CLOSING_WAIT)/100; - - /* wait for data to drain from the buffer */ - spin_lock_irqsave(&port->ep_lock, flags); - init_waitqueue_entry(&wait, current); - add_wait_queue(&tty->write_wait, &wait); - for (;;) { - set_current_state(TASK_INTERRUPTIBLE); - if (kfifo_len(&port->write_fifo) == 0 - || timeout == 0 || signal_pending(current) - || serial->disconnected) - /* disconnect */ - break; - spin_unlock_irqrestore(&port->ep_lock, flags); - timeout = schedule_timeout(timeout); - spin_lock_irqsave(&port->ep_lock, flags); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&tty->write_wait, &wait); - if (flush) - kfifo_reset_out(&port->write_fifo); - spin_unlock_irqrestore(&port->ep_lock, flags); - tty_kref_put(tty); - - /* wait for data to drain from the device */ - timeout += jiffies; - while ((long)(jiffies - timeout) < 0 && !signal_pending(current) - && !serial->disconnected) { - /* not disconnected */ - if (!tx_active(port)) - break; - msleep(10); - } - - /* disconnected */ - if (serial->disconnected) - return; - - /* wait one more character time, based on baud rate */ - /* (tx_active doesn't seem to wait for the last byte) */ - baud_rate = port->baud_rate; - if (baud_rate == 0) - baud_rate = 50; - msleep(max(1, DIV_ROUND_UP(10000, baud_rate))); -} - static int choose_config(struct usb_device *dev) { /* @@ -1544,7 +1484,6 @@ static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data, struct async_icount *icount; __u8 new_lsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK)); - struct tty_struct *tty; dev_dbg(&edge_port->port->dev, "%s - %02x\n", __func__, new_lsr); @@ -1558,13 +1497,8 @@ static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data, new_lsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK); /* Place LSR data byte into Rx buffer */ - if (lsr_data) { - tty = tty_port_tty_get(&edge_port->port->port); - if (tty) { - edge_tty_recv(&edge_port->port->dev, tty, &data, 1); - tty_kref_put(tty); - } - } + if (lsr_data) + edge_tty_recv(edge_port->port, &data, 1); /* update input line counters */ icount = &edge_port->icount; @@ -1680,7 +1614,6 @@ static void edge_bulk_in_callback(struct urb *urb) struct edgeport_port *edge_port = urb->context; struct device *dev = &edge_port->port->dev; unsigned char *data = urb->transfer_buffer; - struct tty_struct *tty; int retval = 0; int port_number; int status = urb->status; @@ -1719,17 +1652,16 @@ static void edge_bulk_in_callback(struct urb *urb) ++data; } - tty = tty_port_tty_get(&edge_port->port->port); - if (tty && urb->actual_length) { + if (urb->actual_length) { usb_serial_debug_data(dev, __func__, urb->actual_length, data); if (edge_port->close_pending) dev_dbg(dev, "%s - close pending, dropping data on the floor\n", __func__); else - edge_tty_recv(dev, tty, data, urb->actual_length); + edge_tty_recv(edge_port->port, data, + urb->actual_length); edge_port->icount.rx += urb->actual_length; } - tty_kref_put(tty); exit: /* continue read unless stopped */ @@ -1744,16 +1676,16 @@ exit: dev_err(dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval); } -static void edge_tty_recv(struct device *dev, struct tty_struct *tty, - unsigned char *data, int length) +static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data, + int length) { int queued; - queued = tty_insert_flip_string(tty, data, length); + queued = tty_insert_flip_string(&port->port, data, length); if (queued < length) - dev_err(dev, "%s - dropping data, %d bytes lost\n", + dev_err(&port->dev, "%s - dropping data, %d bytes lost\n", __func__, length - queued); - tty_flip_buffer_push(tty); + tty_flip_buffer_push(&port->port); } static void edge_bulk_out_callback(struct urb *urb) @@ -1945,6 +1877,8 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) ++edge_serial->num_ports_open; + port->port.drain_delay = 1; + goto release_es_lock; unlink_int_urb: @@ -1960,6 +1894,7 @@ static void edge_close(struct usb_serial_port *port) struct edgeport_serial *edge_serial; struct edgeport_port *edge_port; struct usb_serial *serial = port->serial; + unsigned long flags; int port_number; edge_serial = usb_get_serial_data(port->serial); @@ -1971,12 +1906,12 @@ static void edge_close(struct usb_serial_port *port) * this flag and dump add read data */ edge_port->close_pending = 1; - /* chase the port close and flush */ - chase_port(edge_port, (HZ * closing_wait) / 100, 1); - usb_kill_urb(port->read_urb); usb_kill_urb(port->write_urb); edge_port->ep_write_urb_in_use = 0; + spin_lock_irqsave(&edge_port->ep_lock, flags); + kfifo_reset_out(&edge_port->write_fifo); + spin_unlock_irqrestore(&edge_port->ep_lock, flags); /* assuming we can still talk to the device, * send a close port command to it */ @@ -2102,16 +2037,21 @@ static int edge_chars_in_buffer(struct tty_struct *tty) struct edgeport_port *edge_port = usb_get_serial_port_data(port); int chars = 0; unsigned long flags; + int ret; if (edge_port == NULL) return 0; - if (edge_port->close_pending == 1) - return 0; spin_lock_irqsave(&edge_port->ep_lock, flags); chars = kfifo_len(&edge_port->write_fifo); spin_unlock_irqrestore(&edge_port->ep_lock, flags); + if (!chars) { + ret = tx_active(edge_port); + if (ret > 0) + chars = ret; + } + dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } @@ -2449,10 +2389,15 @@ static int get_serial_info(struct edgeport_port *edge_port, struct serial_struct __user *retinfo) { struct serial_struct tmp; + unsigned cwait; if (!retinfo) return -EFAULT; + cwait = edge_port->port->port.closing_wait; + if (cwait != ASYNC_CLOSING_WAIT_NONE) + cwait = jiffies_to_msecs(closing_wait) / 10; + memset(&tmp, 0, sizeof(tmp)); tmp.type = PORT_16550A; @@ -2463,7 +2408,7 @@ static int get_serial_info(struct edgeport_port *edge_port, tmp.xmit_fifo_size = edge_port->port->bulk_out_size; tmp.baud_base = 9600; tmp.close_delay = 5*HZ; - tmp.closing_wait = closing_wait; + tmp.closing_wait = cwait; if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) return -EFAULT; @@ -2518,8 +2463,7 @@ static void edge_break(struct tty_struct *tty, int break_state) int status; int bv = 0; /* Off */ - /* chase the port close */ - chase_port(edge_port, 0, 0); + tty_wait_until_sent(tty, 0); if (break_state == -1) bv = 1; /* On */ @@ -2592,6 +2536,8 @@ static int edge_port_probe(struct usb_serial_port *port) return ret; } + port->port.closing_wait = msecs_to_jiffies(closing_wait * 10); + return 0; } diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 1068bf22e27..76c9a847da5 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -25,11 +25,6 @@ #define KP_RETRIES 100 -/* - * Version Information - */ - -#define DRIVER_VERSION "v1.0" #define DRIVER_AUTHOR "Ganesh Varadarajan <ganesh@veritas.com>" #define DRIVER_DESC "USB PocketPC PDA driver" diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 4264821a3b3..155eab14b30 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -49,10 +49,6 @@ #include <linux/uaccess.h> #include "usb-wwan.h" -/* - * Version Information - */ -#define DRIVER_VERSION "v0.4" #define DRIVER_AUTHOR "Roelf Diedericks" #define DRIVER_DESC "IPWireless tty driver" diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index e24e2d4f4c1..716930ab1bb 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -287,7 +287,6 @@ static void ir_process_read_urb(struct urb *urb) { struct usb_serial_port *port = urb->context; unsigned char *data = urb->transfer_buffer; - struct tty_struct *tty; if (!urb->actual_length) return; @@ -302,12 +301,8 @@ static void ir_process_read_urb(struct urb *urb) if (urb->actual_length == 1) return; - tty = tty_port_tty_get(&port->port); - if (!tty) - return; - tty_insert_flip_string(tty, data + 1, urb->actual_length - 1); - tty_flip_buffer_push(tty); - tty_kref_put(tty); + tty_insert_flip_string(&port->port, data + 1, urb->actual_length - 1); + tty_flip_buffer_push(&port->port); } static void ir_set_termios_callback(struct urb *urb) diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index cd5533e81de..ff77027160a 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -32,10 +32,6 @@ #include "iuu_phoenix.h" #include <linux/random.h> -/* - * Version Information - */ -#define DRIVER_VERSION "v0.12" #define DRIVER_DESC "Infinity USB Unlimited Phoenix driver" static const struct usb_device_id id_table[] = { @@ -585,7 +581,6 @@ static void read_buf_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; unsigned char *data = urb->transfer_buffer; - struct tty_struct *tty; int status = urb->status; if (status) { @@ -596,14 +591,12 @@ static void read_buf_callback(struct urb *urb) } dev_dbg(&port->dev, "%s - %i chars to write\n", __func__, urb->actual_length); - tty = tty_port_tty_get(&port->port); if (data == NULL) dev_dbg(&port->dev, "%s - data is NULL !!!\n", __func__); - if (tty && urb->actual_length && data) { - tty_insert_flip_string(tty, data, urb->actual_length); - tty_flip_buffer_push(tty); + if (urb->actual_length && data) { + tty_insert_flip_string(&port->port, data, urb->actual_length); + tty_flip_buffer_push(&port->port); } - tty_kref_put(tty); iuu_led_activity_on(urb); } @@ -1164,7 +1157,7 @@ static ssize_t store_vcc_mode(struct device *dev, struct iuu_private *priv = usb_get_serial_port_data(port); unsigned long v; - if (strict_strtoul(buf, 10, &v)) { + if (kstrtoul(buf, 10, &v)) { dev_err(dev, "%s - vcc_mode: %s is not a unsigned long\n", __func__, buf); goto fail_store_vcc_mode; @@ -1232,8 +1225,6 @@ MODULE_AUTHOR("Alain Degreffe eczema@ecze.com"); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); -MODULE_VERSION(DRIVER_VERSION); - module_param(xmas, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(xmas, "Xmas colors enabled or not"); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 7179b0c5f81..1fd1935c831 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -44,10 +44,6 @@ #include <linux/usb/ezusb.h> #include "keyspan.h" -/* - * Version Information - */ -#define DRIVER_VERSION "v1.1.5" #define DRIVER_AUTHOR "Hugh Blemings <hugh@misc.nu" #define DRIVER_DESC "Keyspan USB to Serial Converter Driver" @@ -295,21 +291,19 @@ static void usa26_indat_callback(struct urb *urb) int i, err; int endpoint; struct usb_serial_port *port; - struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; int status = urb->status; endpoint = usb_pipeendpoint(urb->pipe); if (status) { - dev_dbg(&urb->dev->dev,"%s - nonzero status: %x on endpoint %d.\n", + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n", __func__, status, endpoint); return; } port = urb->context; - tty = tty_port_tty_get(&port->port); - if (tty && urb->actual_length) { + if (urb->actual_length) { /* 0x80 bit is error flag */ if ((data[0] & 0x80) == 0) { /* no errors on individual bytes, only @@ -319,7 +313,7 @@ static void usa26_indat_callback(struct urb *urb) else err = 0; for (i = 1; i < urb->actual_length ; ++i) - tty_insert_flip_char(tty, data[i], err); + tty_insert_flip_char(&port->port, data[i], err); } else { /* some bytes had errors, every byte has status */ dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); @@ -332,12 +326,12 @@ static void usa26_indat_callback(struct urb *urb) if (stat & RXERROR_PARITY) flag |= TTY_PARITY; /* XXX should handle break (0x10) */ - tty_insert_flip_char(tty, data[i+1], flag); + tty_insert_flip_char(&port->port, data[i+1], + flag); } } - tty_flip_buffer_push(tty); + tty_flip_buffer_push(&port->port); } - tty_kref_put(tty); /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); @@ -450,7 +444,6 @@ static void usa28_indat_callback(struct urb *urb) { int err; struct usb_serial_port *port; - struct tty_struct *tty; unsigned char *data; struct keyspan_port_private *p_priv; int status = urb->status; @@ -473,12 +466,11 @@ static void usa28_indat_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); data = urb->transfer_buffer; - tty = tty_port_tty_get(&port->port); - if (tty && urb->actual_length) { - tty_insert_flip_string(tty, data, urb->actual_length); - tty_flip_buffer_push(tty); + if (urb->actual_length) { + tty_insert_flip_string(&port->port, data, + urb->actual_length); + tty_flip_buffer_push(&port->port); } - tty_kref_put(tty); /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); @@ -536,7 +528,7 @@ static void usa28_instat_callback(struct urb *urb) /* dev_dbg(&urb->dev->dev, - "%s %x %x %x %x %x %x %x %x %x %x %x %x", __func__, + "%s %x %x %x %x %x %x %x %x %x %x %x %x", __func__, data[0], data[1], data[2], data[3], data[4], data[5], data[6], data[7], data[8], data[9], data[10], data[11]); */ @@ -673,7 +665,6 @@ static void usa49_indat_callback(struct urb *urb) int i, err; int endpoint; struct usb_serial_port *port; - struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; int status = urb->status; @@ -686,12 +677,11 @@ static void usa49_indat_callback(struct urb *urb) } port = urb->context; - tty = tty_port_tty_get(&port->port); - if (tty && urb->actual_length) { + if (urb->actual_length) { /* 0x80 bit is error flag */ if ((data[0] & 0x80) == 0) { /* no error on any byte */ - tty_insert_flip_string(tty, data + 1, + tty_insert_flip_string(&port->port, data + 1, urb->actual_length - 1); } else { /* some bytes had errors, every byte has status */ @@ -704,12 +694,12 @@ static void usa49_indat_callback(struct urb *urb) if (stat & RXERROR_PARITY) flag |= TTY_PARITY; /* XXX should handle break (0x10) */ - tty_insert_flip_char(tty, data[i+1], flag); + tty_insert_flip_char(&port->port, data[i+1], + flag); } } - tty_flip_buffer_push(tty); + tty_flip_buffer_push(&port->port); } - tty_kref_put(tty); /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); @@ -722,7 +712,6 @@ static void usa49wg_indat_callback(struct urb *urb) int i, len, x, err; struct usb_serial *serial; struct usb_serial_port *port; - struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; int status = urb->status; @@ -747,7 +736,6 @@ static void usa49wg_indat_callback(struct urb *urb) return; } port = serial->port[data[i++]]; - tty = tty_port_tty_get(&port->port); len = data[i++]; /* 0x80 bit is error flag */ @@ -755,7 +743,8 @@ static void usa49wg_indat_callback(struct urb *urb) /* no error on any byte */ i++; for (x = 1; x < len ; ++x) - tty_insert_flip_char(tty, data[i++], 0); + tty_insert_flip_char(&port->port, + data[i++], 0); } else { /* * some bytes had errors, every byte has status @@ -769,13 +758,12 @@ static void usa49wg_indat_callback(struct urb *urb) if (stat & RXERROR_PARITY) flag |= TTY_PARITY; /* XXX should handle break (0x10) */ - tty_insert_flip_char(tty, + tty_insert_flip_char(&port->port, data[i+1], flag); i += 2; } } - tty_flip_buffer_push(tty); - tty_kref_put(tty); + tty_flip_buffer_push(&port->port); } } @@ -796,7 +784,6 @@ static void usa90_indat_callback(struct urb *urb) int endpoint; struct usb_serial_port *port; struct keyspan_port_private *p_priv; - struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; int status = urb->status; @@ -812,12 +799,12 @@ static void usa90_indat_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (urb->actual_length) { - tty = tty_port_tty_get(&port->port); /* if current mode is DMA, looks like usa28 format otherwise looks like usa26 data format */ if (p_priv->baud > 57600) - tty_insert_flip_string(tty, data, urb->actual_length); + tty_insert_flip_string(&port->port, data, + urb->actual_length); else { /* 0x80 bit is error flag */ if ((data[0] & 0x80) == 0) { @@ -828,8 +815,8 @@ static void usa90_indat_callback(struct urb *urb) else err = 0; for (i = 1; i < urb->actual_length ; ++i) - tty_insert_flip_char(tty, data[i], - err); + tty_insert_flip_char(&port->port, + data[i], err); } else { /* some bytes had errors, every byte has status */ dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); @@ -842,13 +829,12 @@ static void usa90_indat_callback(struct urb *urb) if (stat & RXERROR_PARITY) flag |= TTY_PARITY; /* XXX should handle break (0x10) */ - tty_insert_flip_char(tty, data[i+1], - flag); + tty_insert_flip_char(&port->port, + data[i+1], flag); } } } - tty_flip_buffer_push(tty); - tty_kref_put(tty); + tty_flip_buffer_push(&port->port); } /* Resubmit urb so we continue receiving */ @@ -2430,7 +2416,7 @@ static void keyspan_release(struct usb_serial *serial) static int keyspan_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; - struct keyspan_port_private *s_priv; + struct keyspan_serial_private *s_priv; struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; struct callbacks *cback; @@ -2445,7 +2431,6 @@ static int keyspan_port_probe(struct usb_serial_port *port) if (!p_priv) return -ENOMEM; - s_priv = usb_get_serial_data(port->serial); p_priv->device_details = d_details; /* Setup values for the various callback routines */ diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index bb87e29c4ac..3b17d5d13dc 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -42,10 +42,6 @@ #undef XIRCOM #endif -/* - * Version Information - */ -#define DRIVER_VERSION "v1.1" #define DRIVER_AUTHOR "Brian Warner <warner@lothar.com>" #define DRIVER_DESC "USB Keyspan PDA Converter driver" @@ -142,7 +138,6 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work) static void keyspan_pda_rx_interrupt(struct urb *urb) { struct usb_serial_port *port = urb->context; - struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; int retval; int status = urb->status; @@ -167,14 +162,12 @@ static void keyspan_pda_rx_interrupt(struct urb *urb) /* see if the message is data or a status interrupt */ switch (data[0]) { case 0: - tty = tty_port_tty_get(&port->port); /* rest of message is rx data */ - if (tty && urb->actual_length) { - tty_insert_flip_string(tty, data + 1, + if (urb->actual_length) { + tty_insert_flip_string(&port->port, data + 1, urb->actual_length - 1); - tty_flip_buffer_push(tty); + tty_flip_buffer_push(&port->port); } - tty_kref_put(tty); break; case 1: /* status interrupt */ diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 1f4517864cd..769d910ae0a 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -49,10 +49,6 @@ #include <linux/usb/serial.h> #include "kl5kusb105.h" -/* - * Version Information - */ -#define DRIVER_VERSION "v0.4" #define DRIVER_AUTHOR "Utz-Uwe Haus <haus@uuhaus.de>, Johan Hovold <jhovold@gmail.com>" #define DRIVER_DESC "KLSI KL5KUSB105 chipset USB->Serial Converter driver" @@ -393,7 +389,6 @@ static void klsi_105_process_read_urb(struct urb *urb) { struct usb_serial_port *port = urb->context; unsigned char *data = urb->transfer_buffer; - struct tty_struct *tty; unsigned len; /* empty urbs seem to happen, we ignore them */ @@ -405,19 +400,14 @@ static void klsi_105_process_read_urb(struct urb *urb) return; } - tty = tty_port_tty_get(&port->port); - if (!tty) - return; - len = get_unaligned_le16(data); if (len > urb->actual_length - KLSI_HDR_LEN) { dev_dbg(&port->dev, "%s - packet length mismatch\n", __func__); len = urb->actual_length - KLSI_HDR_LEN; } - tty_insert_flip_string(tty, data + KLSI_HDR_LEN, len); - tty_flip_buffer_push(tty); - tty_kref_put(tty); + tty_insert_flip_string(&port->port, data + KLSI_HDR_LEN, len); + tty_flip_buffer_push(&port->port); } static void klsi_105_set_termios(struct tty_struct *tty, diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index c9ca7a5b12e..903d938e174 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -38,8 +38,6 @@ #include <linux/ioctl.h> #include "kobil_sct.h" -/* Version Information */ -#define DRIVER_VERSION "21/05/2004" #define DRIVER_AUTHOR "KOBIL Systems GmbH - http://www.kobil.com" #define DRIVER_DESC "KOBIL USB Smart Card Terminal Driver (experimental)" @@ -326,7 +324,6 @@ static void kobil_read_int_callback(struct urb *urb) { int result; struct usb_serial_port *port = urb->context; - struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; int status = urb->status; @@ -335,8 +332,7 @@ static void kobil_read_int_callback(struct urb *urb) return; } - tty = tty_port_tty_get(&port->port); - if (tty && urb->actual_length) { + if (urb->actual_length) { /* BEGIN DEBUG */ /* @@ -355,10 +351,9 @@ static void kobil_read_int_callback(struct urb *urb) */ /* END DEBUG */ - tty_insert_flip_string(tty, data, urb->actual_length); - tty_flip_buffer_push(tty); + tty_insert_flip_string(&port->port, data, urb->actual_length); + tty_flip_buffer_push(&port->port); } - tty_kref_put(tty); result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); dev_dbg(&port->dev, "%s - Send read URB returns: %i\n", __func__, result); diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 8a208100410..a64d420f687 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -38,10 +38,6 @@ #include <linux/ioctl.h> #include "mct_u232.h" -/* - * Version Information - */ -#define DRIVER_VERSION "z2.1" /* Linux in-kernel version */ #define DRIVER_AUTHOR "Wolfgang Grandegger <wolfgang@ces.ch>" #define DRIVER_DESC "Magic Control Technology USB-RS232 converter driver" @@ -503,19 +499,15 @@ static void mct_u232_dtr_rts(struct usb_serial_port *port, int on) unsigned int control_state; struct mct_u232_private *priv = usb_get_serial_port_data(port); - mutex_lock(&port->serial->disc_mutex); - if (!port->serial->disconnected) { - /* drop DTR and RTS */ - spin_lock_irq(&priv->lock); - if (on) - priv->control_state |= TIOCM_DTR | TIOCM_RTS; - else - priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); - control_state = priv->control_state; - spin_unlock_irq(&priv->lock); - mct_u232_set_modem_ctrl(port, control_state); - } - mutex_unlock(&port->serial->disc_mutex); + spin_lock_irq(&priv->lock); + if (on) + priv->control_state |= TIOCM_DTR | TIOCM_RTS; + else + priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); + control_state = priv->control_state; + spin_unlock_irq(&priv->lock); + + mct_u232_set_modem_ctrl(port, control_state); } static void mct_u232_close(struct usb_serial_port *port) @@ -535,7 +527,6 @@ static void mct_u232_read_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct mct_u232_private *priv = usb_get_serial_port_data(port); - struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; int retval; int status = urb->status; @@ -565,13 +556,9 @@ static void mct_u232_read_int_callback(struct urb *urb) */ if (urb->transfer_buffer_length > 2) { if (urb->actual_length) { - tty = tty_port_tty_get(&port->port); - if (tty) { - tty_insert_flip_string(tty, data, - urb->actual_length); - tty_flip_buffer_push(tty); - } - tty_kref_put(tty); + tty_insert_flip_string(&port->port, data, + urb->actual_length); + tty_flip_buffer_push(&port->port); } goto exit; } diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index 6f29c74eb76..bf3c7a23553 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -20,8 +20,6 @@ #include <linux/uaccess.h> #include <linux/usb/serial.h> -/* Version Information */ -#define DRIVER_VERSION "v1.2.0.0" #define DRIVER_DESC "Metrologic Instruments Inc. - USB-POS driver" /* Product information. */ @@ -97,7 +95,6 @@ static void metrousb_read_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct metrousb_private *metro_priv = usb_get_serial_port_data(port); - struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; int throttled = 0; int result = 0; @@ -126,15 +123,13 @@ static void metrousb_read_int_callback(struct urb *urb) /* Set the data read from the usb port into the serial port buffer. */ - tty = tty_port_tty_get(&port->port); - if (tty && urb->actual_length) { + if (urb->actual_length) { /* Loop through the data copying each byte to the tty layer. */ - tty_insert_flip_string(tty, data, urb->actual_length); + tty_insert_flip_string(&port->port, data, urb->actual_length); /* Force the data to the tty layer. */ - tty_flip_buffer_push(tty); + tty_flip_buffer_push(&port->port); } - tty_kref_put(tty); /* Set any port variables. */ spin_lock_irqsave(&metro_priv->lock, flags); diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 75267421aad..e0ebec3b5d6 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -36,10 +36,6 @@ #include <linux/uaccess.h> #include <linux/parport.h> -/* - * Version Information - */ -#define DRIVER_VERSION "2.1" #define DRIVER_AUTHOR "Aspire Communications pvt Ltd." #define DRIVER_DESC "Moschip USB Serial Driver" @@ -903,7 +899,6 @@ static void mos7720_bulk_in_callback(struct urb *urb) int retval; unsigned char *data ; struct usb_serial_port *port; - struct tty_struct *tty; int status = urb->status; if (status) { @@ -917,12 +912,10 @@ static void mos7720_bulk_in_callback(struct urb *urb) data = urb->transfer_buffer; - tty = tty_port_tty_get(&port->port); - if (tty && urb->actual_length) { - tty_insert_flip_string(tty, data, urb->actual_length); - tty_flip_buffer_push(tty); + if (urb->actual_length) { + tty_insert_flip_string(&port->port, data, urb->actual_length); + tty_flip_buffer_push(&port->port); } - tty_kref_put(tty); if (port->read_urb->status != -EINPROGRESS) { retval = usb_submit_urb(port->read_urb, GFP_ATOMIC); diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 1cf3375ec1a..809fb329eca 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -35,10 +35,6 @@ #include <linux/usb/serial.h> #include <linux/uaccess.h> -/* - * Version Information - */ -#define DRIVER_VERSION "1.3.2" #define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver" /* @@ -748,7 +744,6 @@ static void mos7840_bulk_in_callback(struct urb *urb) struct usb_serial *serial; struct usb_serial_port *port; struct moschip_port *mos7840_port; - struct tty_struct *tty; int status = urb->status; mos7840_port = urb->context; @@ -777,12 +772,9 @@ static void mos7840_bulk_in_callback(struct urb *urb) usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); if (urb->actual_length) { - tty = tty_port_tty_get(&mos7840_port->port->port); - if (tty) { - tty_insert_flip_string(tty, data, urb->actual_length); - tty_flip_buffer_push(tty); - tty_kref_put(tty); - } + struct tty_port *tport = &mos7840_port->port->port; + tty_insert_flip_string(tport, data, urb->actual_length); + tty_flip_buffer_push(tport); mos7840_port->icount.rx += urb->actual_length; smp_wmb(); dev_dbg(&port->dev, "mos7840_port->icount.rx is %d:\n", mos7840_port->icount.rx); diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index 1566f8f500a..38725fc8c2c 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -32,7 +32,6 @@ static void navman_read_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; unsigned char *data = urb->transfer_buffer; - struct tty_struct *tty; int status = urb->status; int result; @@ -55,12 +54,10 @@ static void navman_read_int_callback(struct urb *urb) usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); - tty = tty_port_tty_get(&port->port); - if (tty && urb->actual_length) { - tty_insert_flip_string(tty, data, urb->actual_length); - tty_flip_buffer_push(tty); + if (urb->actual_length) { + tty_insert_flip_string(&port->port, data, urb->actual_length); + tty_flip_buffer_push(&port->port); } - tty_kref_put(tty); exit: result = usb_submit_urb(urb, GFP_ATOMIC); diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 9ab73d29577..1e1cafe287e 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -23,10 +23,6 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -/* - * Version Information - */ -#define DRIVER_VERSION "v1.1" #define DRIVER_AUTHOR "Alessandro Zummo" #define DRIVER_DESC "USB ZyXEL omni.net LCD PLUS Driver" @@ -178,13 +174,9 @@ static void omninet_read_bulk_callback(struct urb *urb) } if (urb->actual_length && header->oh_len) { - struct tty_struct *tty = tty_port_tty_get(&port->port); - if (tty) { - tty_insert_flip_string(tty, data + OMNINET_DATAOFFSET, - header->oh_len); - tty_flip_buffer_push(tty); - tty_kref_put(tty); - } + tty_insert_flip_string(&port->port, data + OMNINET_DATAOFFSET, + header->oh_len); + tty_flip_buffer_push(&port->port); } /* Continue trying to always read */ diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 6aba731d486..e13e1a4d3e1 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -1,6 +1,7 @@ /* * Opticon USB barcode to serial driver * + * Copyright (C) 2011 - 2012 Johan Hovold <jhovold@gmail.com> * Copyright (C) 2011 Martin Jansen <martin.jansen@opticon.com> * Copyright (C) 2008 - 2009 Greg Kroah-Hartman <gregkh@suse.de> * Copyright (C) 2008 - 2009 Novell Inc. @@ -40,114 +41,63 @@ MODULE_DEVICE_TABLE(usb, id_table); /* This structure holds all of the individual device information */ struct opticon_private { - struct usb_device *udev; - struct usb_serial *serial; - struct usb_serial_port *port; - unsigned char *bulk_in_buffer; - struct urb *bulk_read_urb; - int buffer_size; - u8 bulk_address; spinlock_t lock; /* protects the following flags */ - bool throttled; - bool actually_throttled; bool rts; bool cts; int outstanding_urbs; }; +static void opticon_process_data_packet(struct usb_serial_port *port, + const unsigned char *buf, size_t len) +{ + tty_insert_flip_string(&port->port, buf, len); + tty_flip_buffer_push(&port->port); +} -static void opticon_read_bulk_callback(struct urb *urb) +static void opticon_process_status_packet(struct usb_serial_port *port, + const unsigned char *buf, size_t len) { - struct opticon_private *priv = urb->context; - unsigned char *data = urb->transfer_buffer; - struct usb_serial_port *port = priv->port; - int status = urb->status; - struct tty_struct *tty; - int result; - int data_length; + struct opticon_private *priv = usb_get_serial_port_data(port); unsigned long flags; - switch (status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dev_dbg(&priv->udev->dev, "%s - urb shutting down with status: %d\n", - __func__, status); + spin_lock_irqsave(&priv->lock, flags); + if (buf[0] == 0x00) + priv->cts = false; + else + priv->cts = true; + spin_unlock_irqrestore(&priv->lock, flags); +} + +static void opticon_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + const unsigned char *hdr = urb->transfer_buffer; + const unsigned char *data = hdr + 2; + size_t data_len = urb->actual_length - 2; + + if (urb->actual_length <= 2) { + dev_dbg(&port->dev, "malformed packet received: %d bytes\n", + urb->actual_length); return; - default: - dev_dbg(&priv->udev->dev, "%s - nonzero urb status received: %d\n", - __func__, status); - goto exit; } - - usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); - - if (urb->actual_length > 2) { - data_length = urb->actual_length - 2; - - /* - * Data from the device comes with a 2 byte header: - * - * <0x00><0x00>data... - * This is real data to be sent to the tty layer - * <0x00><0x01)level - * This is a CTS level change, the third byte is the CTS - * value (0 for low, 1 for high). - */ - if ((data[0] == 0x00) && (data[1] == 0x00)) { - /* real data, send it to the tty layer */ - tty = tty_port_tty_get(&port->port); - if (tty) { - tty_insert_flip_string(tty, data + 2, - data_length); - tty_flip_buffer_push(tty); - tty_kref_put(tty); - } - } else { - if ((data[0] == 0x00) && (data[1] == 0x01)) { - spin_lock_irqsave(&priv->lock, flags); - /* CTS status information package */ - if (data[2] == 0x00) - priv->cts = false; - else - priv->cts = true; - spin_unlock_irqrestore(&priv->lock, flags); - } else { - dev_dbg(&priv->udev->dev, - "Unknown data packet received from the device:" - " %2x %2x\n", - data[0], data[1]); - } - } + /* + * Data from the device comes with a 2 byte header: + * + * <0x00><0x00>data... + * This is real data to be sent to the tty layer + * <0x00><0x01>level + * This is a CTS level change, the third byte is the CTS + * value (0 for low, 1 for high). + */ + if ((hdr[0] == 0x00) && (hdr[1] == 0x00)) { + opticon_process_data_packet(port, data, data_len); + } else if ((hdr[0] == 0x00) && (hdr[1] == 0x01)) { + opticon_process_status_packet(port, data, data_len); } else { - dev_dbg(&priv->udev->dev, - "Improper amount of data received from the device, " - "%d bytes", urb->actual_length); + dev_dbg(&port->dev, "unknown packet received: %02x %02x\n", + hdr[0], hdr[1]); } - -exit: - spin_lock(&priv->lock); - - /* Continue trying to always read if we should */ - if (!priv->throttled) { - usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev, - usb_rcvbulkpipe(priv->udev, - priv->bulk_address), - priv->bulk_in_buffer, priv->buffer_size, - opticon_read_bulk_callback, priv); - result = usb_submit_urb(priv->bulk_read_urb, GFP_ATOMIC); - if (result) - dev_err(&port->dev, - "%s - failed resubmitting read urb, error %d\n", - __func__, result); - } else - priv->actually_throttled = true; - spin_unlock(&priv->lock); } static int send_control_msg(struct usb_serial_port *port, u8 requesttype, @@ -175,52 +125,35 @@ static int send_control_msg(struct usb_serial_port *port, u8 requesttype, static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port) { - struct opticon_private *priv = usb_get_serial_data(port->serial); + struct opticon_private *priv = usb_get_serial_port_data(port); unsigned long flags; - int result = 0; + int res; spin_lock_irqsave(&priv->lock, flags); - priv->throttled = false; - priv->actually_throttled = false; - priv->port = port; priv->rts = false; spin_unlock_irqrestore(&priv->lock, flags); /* Clear RTS line */ send_control_msg(port, CONTROL_RTS, 0); - /* Setup the read URB and start reading from the device */ - usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev, - usb_rcvbulkpipe(priv->udev, - priv->bulk_address), - priv->bulk_in_buffer, priv->buffer_size, - opticon_read_bulk_callback, priv); - /* clear the halt status of the enpoint */ - usb_clear_halt(priv->udev, priv->bulk_read_urb->pipe); + usb_clear_halt(port->serial->dev, port->read_urb->pipe); + + res = usb_serial_generic_open(tty, port); + if (!res) + return res; - result = usb_submit_urb(priv->bulk_read_urb, GFP_KERNEL); - if (result) - dev_err(&port->dev, - "%s - failed resubmitting read urb, error %d\n", - __func__, result); /* Request CTS line state, sometimes during opening the current * CTS state can be missed. */ send_control_msg(port, RESEND_CTS_STATE, 1); - return result; -} - -static void opticon_close(struct usb_serial_port *port) -{ - struct opticon_private *priv = usb_get_serial_data(port->serial); - /* shutdown our urbs */ - usb_kill_urb(priv->bulk_read_urb); + return res; } static void opticon_write_control_callback(struct urb *urb) { - struct opticon_private *priv = urb->context; + struct usb_serial_port *port = urb->context; + struct opticon_private *priv = usb_get_serial_port_data(port); int status = urb->status; unsigned long flags; @@ -231,20 +164,21 @@ static void opticon_write_control_callback(struct urb *urb) kfree(urb->setup_packet); if (status) - dev_dbg(&priv->udev->dev, "%s - nonzero write bulk status received: %d\n", + dev_dbg(&port->dev, + "%s - non-zero urb status received: %d\n", __func__, status); spin_lock_irqsave(&priv->lock, flags); --priv->outstanding_urbs; spin_unlock_irqrestore(&priv->lock, flags); - usb_serial_port_softint(priv->port); + usb_serial_port_softint(port); } static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { - struct opticon_private *priv = usb_get_serial_data(port->serial); + struct opticon_private *priv = usb_get_serial_port_data(port); struct usb_serial *serial = port->serial; struct urb *urb; unsigned char *buffer; @@ -298,7 +232,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, usb_fill_control_urb(urb, serial->dev, usb_sndctrlpipe(serial->dev, 0), (unsigned char *)dr, buffer, count, - opticon_write_control_callback, priv); + opticon_write_control_callback, port); /* send it down the pipe */ status = usb_submit_urb(urb, GFP_ATOMIC); @@ -331,7 +265,7 @@ error_no_buffer: static int opticon_write_room(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - struct opticon_private *priv = usb_get_serial_data(port->serial); + struct opticon_private *priv = usb_get_serial_port_data(port); unsigned long flags; /* @@ -350,44 +284,10 @@ static int opticon_write_room(struct tty_struct *tty) return 2048; } -static void opticon_throttle(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - struct opticon_private *priv = usb_get_serial_data(port->serial); - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - priv->throttled = true; - spin_unlock_irqrestore(&priv->lock, flags); -} - - -static void opticon_unthrottle(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - struct opticon_private *priv = usb_get_serial_data(port->serial); - unsigned long flags; - int result, was_throttled; - - spin_lock_irqsave(&priv->lock, flags); - priv->throttled = false; - was_throttled = priv->actually_throttled; - priv->actually_throttled = false; - spin_unlock_irqrestore(&priv->lock, flags); - - if (was_throttled) { - result = usb_submit_urb(priv->bulk_read_urb, GFP_ATOMIC); - if (result) - dev_err(&port->dev, - "%s - failed submitting read urb, error %d\n", - __func__, result); - } -} - static int opticon_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - struct opticon_private *priv = usb_get_serial_data(port->serial); + struct opticon_private *priv = usb_get_serial_port_data(port); unsigned long flags; int result = 0; @@ -407,7 +307,7 @@ static int opticon_tiocmset(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; - struct opticon_private *priv = usb_get_serial_data(port->serial); + struct opticon_private *priv = usb_get_serial_port_data(port); unsigned long flags; bool rts; bool changed = false; @@ -438,7 +338,7 @@ static int opticon_tiocmset(struct tty_struct *tty, return ret; } -static int get_serial_info(struct opticon_private *priv, +static int get_serial_info(struct usb_serial_port *port, struct serial_struct __user *serial) { struct serial_struct tmp; @@ -450,7 +350,7 @@ static int get_serial_info(struct opticon_private *priv, /* fake emulate a 16550 uart to make userspace code happy */ tmp.type = PORT_16550A; - tmp.line = priv->serial->minor; + tmp.line = port->serial->minor; tmp.port = 0; tmp.irq = 0; tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; @@ -468,13 +368,12 @@ static int opticon_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; - struct opticon_private *priv = usb_get_serial_data(port->serial); dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd); switch (cmd) { case TIOCGSERIAL: - return get_serial_info(priv, + return get_serial_info(port, (struct serial_struct __user *)arg); } @@ -483,106 +382,36 @@ static int opticon_ioctl(struct tty_struct *tty, static int opticon_startup(struct usb_serial *serial) { - struct opticon_private *priv; - struct usb_host_interface *intf; - int i; - int retval = -ENOMEM; - bool bulk_in_found = false; - - /* create our private serial structure */ - priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (priv == NULL) { - dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__); - return -ENOMEM; - } - spin_lock_init(&priv->lock); - priv->serial = serial; - priv->port = serial->port[0]; - priv->udev = serial->dev; - priv->outstanding_urbs = 0; /* Init the outstanding urbs */ - - /* find our bulk endpoint */ - intf = serial->interface->altsetting; - for (i = 0; i < intf->desc.bNumEndpoints; ++i) { - struct usb_endpoint_descriptor *endpoint; - - endpoint = &intf->endpoint[i].desc; - if (!usb_endpoint_is_bulk_in(endpoint)) - continue; - - priv->bulk_read_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!priv->bulk_read_urb) { - dev_err(&priv->udev->dev, "out of memory\n"); - goto error; - } - - priv->buffer_size = usb_endpoint_maxp(endpoint) * 2; - priv->bulk_in_buffer = kmalloc(priv->buffer_size, GFP_KERNEL); - if (!priv->bulk_in_buffer) { - dev_err(&priv->udev->dev, "out of memory\n"); - goto error; - } - - priv->bulk_address = endpoint->bEndpointAddress; - - bulk_in_found = true; - break; - } - - if (!bulk_in_found) { - dev_err(&priv->udev->dev, - "Error - the proper endpoints were not found!\n"); - goto error; + if (!serial->num_bulk_in) { + dev_err(&serial->dev->dev, "no bulk in endpoint\n"); + return -ENODEV; } - usb_set_serial_data(serial, priv); return 0; - -error: - usb_free_urb(priv->bulk_read_urb); - kfree(priv->bulk_in_buffer); - kfree(priv); - return retval; } -static void opticon_disconnect(struct usb_serial *serial) +static int opticon_port_probe(struct usb_serial_port *port) { - struct opticon_private *priv = usb_get_serial_data(serial); - - usb_kill_urb(priv->bulk_read_urb); - usb_free_urb(priv->bulk_read_urb); -} + struct opticon_private *priv; -static void opticon_release(struct usb_serial *serial) -{ - struct opticon_private *priv = usb_get_serial_data(serial); + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; - kfree(priv->bulk_in_buffer); - kfree(priv); -} + spin_lock_init(&priv->lock); -static int opticon_suspend(struct usb_serial *serial, pm_message_t message) -{ - struct opticon_private *priv = usb_get_serial_data(serial); + usb_set_serial_port_data(port, priv); - usb_kill_urb(priv->bulk_read_urb); return 0; } -static int opticon_resume(struct usb_serial *serial) +static int opticon_port_remove(struct usb_serial_port *port) { - struct opticon_private *priv = usb_get_serial_data(serial); - struct usb_serial_port *port = serial->port[0]; - int result; - - mutex_lock(&port->port.mutex); - /* This is protected by the port mutex against close/open */ - if (test_bit(ASYNCB_INITIALIZED, &port->port.flags)) - result = usb_submit_urb(priv->bulk_read_urb, GFP_NOIO); - else - result = 0; - mutex_unlock(&port->port.mutex); - return result; + struct opticon_private *priv = usb_get_serial_port_data(port); + + kfree(priv); + + return 0; } static struct usb_serial_driver opticon_device = { @@ -592,20 +421,19 @@ static struct usb_serial_driver opticon_device = { }, .id_table = id_table, .num_ports = 1, + .bulk_in_size = 256, .attach = opticon_startup, + .port_probe = opticon_port_probe, + .port_remove = opticon_port_remove, .open = opticon_open, - .close = opticon_close, .write = opticon_write, .write_room = opticon_write_room, - .disconnect = opticon_disconnect, - .release = opticon_release, - .throttle = opticon_throttle, - .unthrottle = opticon_unthrottle, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, .ioctl = opticon_ioctl, .tiocmget = opticon_tiocmget, .tiocmset = opticon_tiocmset, - .suspend = opticon_suspend, - .resume = opticon_resume, + .process_read_urb = opticon_process_read_urb, }; static struct usb_serial_driver * const serial_drivers[] = { diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 5dee7d61241..558adfc0500 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -28,7 +28,6 @@ device features. */ -#define DRIVER_VERSION "v0.7.2" #define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>" #define DRIVER_DESC "USB Driver for GSM modems" @@ -81,6 +80,7 @@ static void option_instat_callback(struct urb *urb); #define OPTION_PRODUCT_GTM380_MODEM 0x7201 #define HUAWEI_VENDOR_ID 0x12D1 +#define HUAWEI_PRODUCT_E173 0x140C #define HUAWEI_PRODUCT_K4505 0x1464 #define HUAWEI_PRODUCT_K3765 0x1465 #define HUAWEI_PRODUCT_K4605 0x14C6 @@ -158,6 +158,7 @@ static void option_instat_callback(struct urb *urb); #define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED 0x8001 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED 0x9000 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0x9001 +#define NOVATELWIRELESS_PRODUCT_E362 0x9010 #define NOVATELWIRELESS_PRODUCT_G1 0xA001 #define NOVATELWIRELESS_PRODUCT_G1_M 0xA002 #define NOVATELWIRELESS_PRODUCT_G2 0xA010 @@ -193,6 +194,9 @@ static void option_instat_callback(struct urb *urb); #define DELL_PRODUCT_5730_MINICARD_TELUS 0x8181 #define DELL_PRODUCT_5730_MINICARD_VZW 0x8182 +#define DELL_PRODUCT_5800_MINICARD_VZW 0x8195 /* Novatel E362 */ +#define DELL_PRODUCT_5800_V2_MINICARD_VZW 0x8196 /* Novatel E362 */ + #define KYOCERA_VENDOR_ID 0x0c88 #define KYOCERA_PRODUCT_KPC650 0x17da #define KYOCERA_PRODUCT_KPC680 0x180a @@ -238,6 +242,7 @@ static void option_instat_callback(struct urb *urb); #define TELIT_PRODUCT_CC864_DUAL 0x1005 #define TELIT_PRODUCT_CC864_SINGLE 0x1006 #define TELIT_PRODUCT_DE910_DUAL 0x1010 +#define TELIT_PRODUCT_LE920 0x1200 /* ZTE PRODUCTS */ #define ZTE_VENDOR_ID 0x19d2 @@ -283,6 +288,8 @@ static void option_instat_callback(struct urb *urb); /* ALCATEL PRODUCTS */ #define ALCATEL_VENDOR_ID 0x1bbb #define ALCATEL_PRODUCT_X060S_X200 0x0000 +#define ALCATEL_PRODUCT_X220_X500D 0x0017 +#define ALCATEL_PRODUCT_L100V 0x011e #define PIRELLI_VENDOR_ID 0x1266 #define PIRELLI_PRODUCT_C100_1 0x1002 @@ -334,6 +341,8 @@ static void option_instat_callback(struct urb *urb); #define CINTERION_PRODUCT_EU3_E 0x0051 #define CINTERION_PRODUCT_EU3_P 0x0052 #define CINTERION_PRODUCT_PH8 0x0053 +#define CINTERION_PRODUCT_AH6 0x0055 +#define CINTERION_PRODUCT_PLS8 0x0060 /* Olivetti products */ #define OLIVETTI_VENDOR_ID 0x0b3c @@ -424,9 +433,12 @@ static void option_instat_callback(struct urb *urb); #define MEDIATEK_VENDOR_ID 0x0e8d #define MEDIATEK_PRODUCT_DC_1COM 0x00a0 #define MEDIATEK_PRODUCT_DC_4COM 0x00a5 +#define MEDIATEK_PRODUCT_DC_4COM2 0x00a7 #define MEDIATEK_PRODUCT_DC_5COM 0x00a4 #define MEDIATEK_PRODUCT_7208_1COM 0x7101 #define MEDIATEK_PRODUCT_7208_2COM 0x7102 +#define MEDIATEK_PRODUCT_7103_2COM 0x7103 +#define MEDIATEK_PRODUCT_7106_2COM 0x7106 #define MEDIATEK_PRODUCT_FP_1COM 0x0003 #define MEDIATEK_PRODUCT_FP_2COM 0x0023 #define MEDIATEK_PRODUCT_FPDC_1COM 0x0043 @@ -436,6 +448,18 @@ static void option_instat_callback(struct urb *urb); #define CELLIENT_VENDOR_ID 0x2692 #define CELLIENT_PRODUCT_MEN200 0x9005 +/* Hyundai Petatel Inc. products */ +#define PETATEL_VENDOR_ID 0x1ff4 +#define PETATEL_PRODUCT_NP10T 0x600e + +/* TP-LINK Incorporated products */ +#define TPLINK_VENDOR_ID 0x2357 +#define TPLINK_PRODUCT_MA180 0x0201 + +/* Changhong products */ +#define CHANGHONG_VENDOR_ID 0x2077 +#define CHANGHONG_PRODUCT_CH690 0x7001 + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -457,6 +481,7 @@ static const struct option_blacklist_info four_g_w14_blacklist = { static const struct option_blacklist_info alcatel_x200_blacklist = { .sendsetup = BIT(0) | BIT(1), + .reserved = BIT(4), }; static const struct option_blacklist_info zte_0037_blacklist = { @@ -517,6 +542,11 @@ static const struct option_blacklist_info zte_1255_blacklist = { .reserved = BIT(3) | BIT(4), }; +static const struct option_blacklist_info telit_le920_blacklist = { + .sendsetup = BIT(0), + .reserved = BIT(1) | BIT(5), +}; + static const struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -548,6 +578,15 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) }, { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) }, { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) }, + { USB_DEVICE(QUANTA_VENDOR_ID, 0xea42), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c05, USB_CLASS_COMM, 0x02, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c1f, USB_CLASS_COMM, 0x02, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t) &net_intf1_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1441, USB_CLASS_COMM, 0x02, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1442, USB_CLASS_COMM, 0x02, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff), @@ -706,6 +745,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) }, /* Novatel Ovation MC551 a.k.a. Verizon USB551L */ { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E362, 0xff, 0xff, 0xff) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) }, @@ -728,28 +768,30 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_SPRINT) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_TELUS) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ + { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) }, { USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) }, { USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) }, - { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) }, - { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) }, - { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1004) }, - { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1005) }, - { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1006) }, - { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1007) }, - { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1008) }, - { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1009) }, - { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100A) }, - { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100B) }, - { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100C) }, - { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100D) }, - { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100E) }, - { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100F) }, - { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1010) }, - { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1011) }, - { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1004, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1005, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1006, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1007, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1008, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1009, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100A, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100B, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100C, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100D, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100E, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100F, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1010, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1011, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012, 0xff) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */ @@ -762,6 +804,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_DUAL) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920), + .driver_info = (kernel_ulong_t)&telit_le920_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, @@ -876,6 +920,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0126, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0128, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0135, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0136, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0137, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0139, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0142, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0144, 0xff, 0xff, 0xff) }, @@ -896,20 +944,36 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0189, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0191, 0xff, 0xff, 0xff), /* ZTE EuFi890 */ .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0196, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0197, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0199, 0xff, 0xff, 0xff), /* ZTE MF820S */ .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0200, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0201, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0254, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */ .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff), /* ONDA MT8205 */ + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff), /* ZTE MF880 */ + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0330, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0395, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1021, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) }, @@ -1089,6 +1153,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1301, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1302, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1303, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1333, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff), @@ -1157,6 +1225,16 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200), .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist }, + { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D), + .driver_info = (kernel_ulong_t)&net_intf6_blacklist }, + { USB_DEVICE(ALCATEL_VENDOR_ID, 0x0052), + .driver_info = (kernel_ulong_t)&net_intf6_blacklist }, + { USB_DEVICE(ALCATEL_VENDOR_ID, 0x00b6), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + { USB_DEVICE(ALCATEL_VENDOR_ID, 0x00b7), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L100V), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14), @@ -1165,26 +1243,28 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) }, { USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) }, /* Pirelli */ - { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1)}, - { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_2)}, - { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1004)}, - { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1005)}, - { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1006)}, - { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1007)}, - { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1008)}, - { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1009)}, - { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100A)}, - { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100B) }, - { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100C) }, - { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100D) }, - { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100E) }, - { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100F) }, - { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1011)}, - { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012)}, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_2, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1004, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1005, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1006, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1007, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1008, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1009, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100A, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100B, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100C, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100D, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100E, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100F, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1011, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012, 0xff) }, /* Cinterion */ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AH6) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLS8) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) }, { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) }, @@ -1261,7 +1341,15 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_2COM, 0x0a, 0x00, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_1COM, 0x0a, 0x00, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_2COM, 0x0a, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7103_2COM, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7106_2COM, 0x02, 0x02, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) }, { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) }, + { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) }, + { USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE(CHANGHONG_VENDOR_ID, CHANGHONG_PRODUCT_CH690) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); @@ -1341,20 +1429,10 @@ static int option_probe(struct usb_serial *serial, &serial->interface->cur_altsetting->desc; struct usb_device_descriptor *dev_desc = &serial->dev->descriptor; - /* - * D-Link DWM 652 still exposes CD-Rom emulation interface in modem - * mode. - */ - if (dev_desc->idVendor == DLINK_VENDOR_ID && - dev_desc->idProduct == DLINK_PRODUCT_DWM_652 && - iface_desc->bInterfaceClass == 0x08) + /* Never bind to the CD-Rom emulation interface */ + if (iface_desc->bInterfaceClass == 0x08) return -ENODEV; - /* Bandrich modem and AT command interface is 0xff */ - if ((dev_desc->idVendor == BANDRICH_VENDOR_ID || - dev_desc->idVendor == PIRELLI_VENDOR_ID) && - iface_desc->bInterfaceClass != 0xff) - return -ENODEV; /* * Don't bind reserved interfaces (like network ones) which often have * the same class/subclass/protocol as the serial interfaces. Look at @@ -1369,9 +1447,9 @@ static int option_probe(struct usb_serial *serial, * Don't bind network interface on Samsung GT-B3730, it is handled by * a separate module. */ - if (dev_desc->idVendor == SAMSUNG_VENDOR_ID && - dev_desc->idProduct == SAMSUNG_PRODUCT_GT_B3730 && - iface_desc->bInterfaceClass != USB_CLASS_CDC_DATA) + if (dev_desc->idVendor == cpu_to_le16(SAMSUNG_VENDOR_ID) && + dev_desc->idProduct == cpu_to_le16(SAMSUNG_PRODUCT_GT_B3730) && + iface_desc->bInterfaceClass != USB_CLASS_CDC_DATA) return -ENODEV; /* Store device id so we can use it during attach. */ @@ -1509,5 +1587,4 @@ static int option_send_setup(struct usb_serial_port *port) MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index cee9a52ca89..a958fd41b5b 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -57,7 +57,6 @@ #define OTI6858_DESCRIPTION \ "Ours Technology Inc. OTi-6858 USB to serial adapter driver" #define OTI6858_AUTHOR "Tomasz Michal Lukaszewski <FIXME@FIXME>" -#define OTI6858_VERSION "0.2" static const struct usb_device_id id_table[] = { { USB_DEVICE(OTI6858_VENDOR_ID, OTI6858_PRODUCT_ID) }, @@ -821,7 +820,6 @@ static void oti6858_read_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct oti6858_private *priv = usb_get_serial_port_data(port); - struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; unsigned long flags; int status = urb->status; @@ -836,12 +834,10 @@ static void oti6858_read_bulk_callback(struct urb *urb) return; } - tty = tty_port_tty_get(&port->port); - if (tty != NULL && urb->actual_length > 0) { - tty_insert_flip_string(tty, data, urb->actual_length); - tty_flip_buffer_push(tty); + if (urb->actual_length > 0) { + tty_insert_flip_string(&port->port, data, urb->actual_length); + tty_flip_buffer_push(&port->port); } - tty_kref_put(tty); /* schedule the interrupt urb */ result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); @@ -899,5 +895,4 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(OTI6858_DESCRIPTION); MODULE_AUTHOR(OTI6858_AUTHOR); -MODULE_VERSION(OTI6858_VERSION); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 60024190136..54adc9125e5 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -772,7 +772,6 @@ static void pl2303_process_read_urb(struct urb *urb) { struct usb_serial_port *port = urb->context; struct pl2303_private *priv = usb_get_serial_port_data(port); - struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; char tty_flag = TTY_NORMAL; unsigned long flags; @@ -789,10 +788,6 @@ static void pl2303_process_read_urb(struct urb *urb) if (!urb->actual_length) return; - tty = tty_port_tty_get(&port->port); - if (!tty) - return; - /* break takes precedence over parity, */ /* which takes precedence over framing errors */ if (line_status & UART_BREAK_ERROR) @@ -805,19 +800,19 @@ static void pl2303_process_read_urb(struct urb *urb) /* overrun is special, not associated with a char */ if (line_status & UART_OVERRUN_ERROR) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); if (port->port.console && port->sysrq) { for (i = 0; i < urb->actual_length; ++i) if (!usb_serial_handle_sysrq_char(port, data[i])) - tty_insert_flip_char(tty, data[i], tty_flag); + tty_insert_flip_char(&port->port, data[i], + tty_flag); } else { - tty_insert_flip_string_fixed_flag(tty, data, tty_flag, + tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag, urb->actual_length); } - tty_flip_buffer_push(tty); - tty_kref_put(tty); + tty_flip_buffer_push(&port->port); } /* All of the device info needed for the PL2303 SIO serial converter */ diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c index 9b1b96f2d09..31f81c3c15e 100644 --- a/drivers/usb/serial/qcaux.c +++ b/drivers/usb/serial/qcaux.c @@ -69,6 +69,7 @@ static struct usb_device_id id_table[] = { { USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfd, 0xff) }, /* NMEA */ { USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfe, 0xff) }, /* WMC */ { USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xff, 0xff) }, /* DIAG */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1fac, 0x0151, 0xff, 0xff, 0xff) }, { }, }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index aa148c21ea4..59b32b78212 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -53,6 +53,7 @@ static const struct usb_device_id id_table[] = { {DEVICE_G1K(0x05c6, 0x9221)}, /* Generic Gobi QDL device */ {DEVICE_G1K(0x05c6, 0x9231)}, /* Generic Gobi QDL device */ {DEVICE_G1K(0x1f45, 0x0001)}, /* Unknown Gobi QDL device */ + {DEVICE_G1K(0x1bc7, 0x900e)}, /* Telit Gobi QDL device */ /* Gobi 2000 devices */ {USB_DEVICE(0x1410, 0xa010)}, /* Novatel Gobi 2000 QDL device */ @@ -196,12 +197,15 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) if (is_gobi1k) { /* Gobi 1K USB layout: - * 0: serial port (doesn't respond) + * 0: DM/DIAG (use libqcdm from ModemManager for communication) * 1: serial port (doesn't respond) * 2: AT-capable modem port * 3: QMI/net */ - if (ifnum == 2) + if (ifnum == 0) { + dev_dbg(dev, "Gobi 1K DM/DIAG interface found\n"); + altsetting = 1; + } else if (ifnum == 2) dev_dbg(dev, "Modem port found\n"); else altsetting = -1; diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index ffcfc962ab1..d643a4d4d77 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -65,8 +65,6 @@ #define QT2_WRITE_BUFFER_SIZE 512 /* size of write buffer */ #define QT2_WRITE_CONTROL_SIZE 5 /* control bytes used for a write */ -/* Version Information */ -#define DRIVER_VERSION "v0.1" #define DRIVER_DESC "Quatech 2nd gen USB to Serial Driver" #define USB_VENDOR_ID_QUATECH 0x061d @@ -611,7 +609,6 @@ void qt2_process_read_urb(struct urb *urb) struct qt2_serial_private *serial_priv; struct usb_serial_port *port; struct qt2_port_private *port_priv; - struct tty_struct *tty; bool escapeflag; unsigned char *ch; int i; @@ -622,15 +619,11 @@ void qt2_process_read_urb(struct urb *urb) return; ch = urb->transfer_buffer; - tty = NULL; serial = urb->context; serial_priv = usb_get_serial_data(serial); port = serial->port[serial_priv->current_port]; port_priv = usb_get_serial_port_data(port); - if (port_priv->is_open) - tty = tty_port_tty_get(&port->port); - for (i = 0; i < urb->actual_length; i++) { ch = (unsigned char *)urb->transfer_buffer + i; if ((i <= (len - 3)) && @@ -668,10 +661,9 @@ void qt2_process_read_urb(struct urb *urb) __func__); break; } - if (tty) { - tty_flip_buffer_push(tty); - tty_kref_put(tty); - } + + if (port_priv->is_open) + tty_flip_buffer_push(&port->port); newport = *(ch + 3); @@ -685,10 +677,6 @@ void qt2_process_read_urb(struct urb *urb) serial_priv->current_port = newport; port = serial->port[serial_priv->current_port]; port_priv = usb_get_serial_port_data(port); - if (port_priv->is_open) - tty = tty_port_tty_get(&port->port); - else - tty = NULL; i += 3; escapeflag = true; break; @@ -699,8 +687,8 @@ void qt2_process_read_urb(struct urb *urb) escapeflag = true; break; case QT2_CONTROL_ESCAPE: - tty_buffer_request_room(tty, 2); - tty_insert_flip_string(tty, ch, 2); + tty_buffer_request_room(&port->port, 2); + tty_insert_flip_string(&port->port, ch, 2); i += 2; escapeflag = true; break; @@ -714,16 +702,12 @@ void qt2_process_read_urb(struct urb *urb) continue; } - if (tty) { - tty_buffer_request_room(tty, 1); - tty_insert_flip_string(tty, ch, 1); - } + tty_buffer_request_room(&port->port, 1); + tty_insert_flip_string(&port->port, ch, 1); } - if (tty) { - tty_flip_buffer_push(tty); - tty_kref_put(tty); - } + if (port_priv->is_open) + tty_flip_buffer_push(&port->port); } static void qt2_write_bulk_callback(struct urb *urb) @@ -947,19 +931,17 @@ static void qt2_dtr_rts(struct usb_serial_port *port, int on) struct usb_device *dev = port->serial->dev; struct qt2_port_private *port_priv = usb_get_serial_port_data(port); - mutex_lock(&port->serial->disc_mutex); - if (!port->serial->disconnected) { - /* Disable flow control */ - if (!on && qt2_setregister(dev, port_priv->device_port, + /* Disable flow control */ + if (!on) { + if (qt2_setregister(dev, port_priv->device_port, UART_MCR, 0) < 0) dev_warn(&port->dev, "error from flowcontrol urb\n"); - /* drop RTS and DTR */ - if (on) - update_mctrl(port_priv, TIOCM_DTR | TIOCM_RTS, 0); - else - update_mctrl(port_priv, 0, TIOCM_DTR | TIOCM_RTS); } - mutex_unlock(&port->serial->disc_mutex); + /* drop RTS and DTR */ + if (on) + update_mctrl(port_priv, TIOCM_DTR | TIOCM_RTS, 0); + else + update_mctrl(port_priv, 0, TIOCM_DTR | TIOCM_RTS); } static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch) diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index c949ce6ef0c..21cd7bf2a8c 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -207,38 +207,31 @@ static void safe_process_read_urb(struct urb *urb) unsigned char *data = urb->transfer_buffer; unsigned char length = urb->actual_length; int actual_length; - struct tty_struct *tty; __u16 fcs; if (!length) return; - tty = tty_port_tty_get(&port->port); - if (!tty) - return; - if (!safe) goto out; fcs = fcs_compute10(data, length, CRC10_INITFCS); if (fcs) { dev_err(&port->dev, "%s - bad CRC %x\n", __func__, fcs); - goto err; + return; } actual_length = data[length - 2] >> 2; if (actual_length > (length - 2)) { dev_err(&port->dev, "%s - inconsistent lengths %d:%d\n", __func__, actual_length, length); - goto err; + return; } dev_info(&urb->dev->dev, "%s - actual: %d\n", __func__, actual_length); length = actual_length; out: - tty_insert_flip_string(tty, data, length); - tty_flip_buffer_push(tty); -err: - tty_kref_put(tty); + tty_insert_flip_string(&port->port, data, length); + tty_flip_buffer_push(&port->port); } static int safe_prepare_write_buffer(struct usb_serial_port *port, diff --git a/drivers/usb/serial/siemens_mpi.c b/drivers/usb/serial/siemens_mpi.c index e4a1787cdba..a76b1ae54a2 100644 --- a/drivers/usb/serial/siemens_mpi.c +++ b/drivers/usb/serial/siemens_mpi.c @@ -16,8 +16,6 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -/* Version Information */ -#define DRIVER_VERSION "Version 0.1 09/26/2005" #define DRIVER_AUTHOR "Thomas Hergenhahn@web.de http://libnodave.sf.net" #define DRIVER_DESC "Driver for Siemens USB/MPI adapter" diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 270860f6bb2..c13f6e74774 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -18,7 +18,7 @@ */ /* Uncomment to log function calls */ /* #define DEBUG */ -#define DRIVER_VERSION "v.1.7.16" + #define DRIVER_AUTHOR "Kevin Lloyd, Elina Pasheva, Matthew Safar, Rory Filer" #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems" @@ -569,7 +569,6 @@ static void sierra_indat_callback(struct urb *urb) int err; int endpoint; struct usb_serial_port *port; - struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; int status = urb->status; @@ -581,16 +580,12 @@ static void sierra_indat_callback(struct urb *urb) " endpoint %02x\n", __func__, status, endpoint); } else { if (urb->actual_length) { - tty = tty_port_tty_get(&port->port); - if (tty) { - tty_insert_flip_string(tty, data, - urb->actual_length); - tty_flip_buffer_push(tty); - - tty_kref_put(tty); - usb_serial_debug_data(&port->dev, __func__, - urb->actual_length, data); - } + tty_insert_flip_string(&port->port, data, + urb->actual_length); + tty_flip_buffer_push(&port->port); + + usb_serial_debug_data(&port->dev, __func__, + urb->actual_length, data); } else { dev_dbg(&port->dev, "%s: empty read urb" " received\n", __func__); @@ -861,19 +856,13 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port) static void sierra_dtr_rts(struct usb_serial_port *port, int on) { - struct usb_serial *serial = port->serial; struct sierra_port_private *portdata; portdata = usb_get_serial_port_data(port); portdata->rts_state = on; portdata->dtr_state = on; - if (serial->dev) { - mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) - sierra_send_setup(port); - mutex_unlock(&serial->disc_mutex); - } + sierra_send_setup(port); } static int sierra_startup(struct usb_serial *serial) @@ -1078,7 +1067,6 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); module_param(nmea, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 769c137f897..91ff8e3bddb 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -28,9 +28,6 @@ #include <linux/usb.h> #include <linux/usb/serial.h> - -/* Version Information */ -#define DRIVER_VERSION "v0.10" #define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver" #define SPCP8x5_007_VID 0x04FC @@ -465,7 +462,6 @@ static void spcp8x5_process_read_urb(struct urb *urb) { struct usb_serial_port *port = urb->context; struct spcp8x5_private *priv = usb_get_serial_port_data(port); - struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; unsigned long flags; u8 status; @@ -484,9 +480,6 @@ static void spcp8x5_process_read_urb(struct urb *urb) if (!urb->actual_length) return; - tty = tty_port_tty_get(&port->port); - if (!tty) - return; if (status & UART_STATE_TRANSIENT_MASK) { /* break takes precedence over parity, which takes precedence @@ -501,17 +494,21 @@ static void spcp8x5_process_read_urb(struct urb *urb) /* overrun is special, not associated with a char */ if (status & UART_OVERRUN_ERROR) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - - if (status & UART_DCD) - usb_serial_handle_dcd_change(port, tty, - priv->line_status & MSR_STATUS_LINE_DCD); + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); + + if (status & UART_DCD) { + struct tty_struct *tty = tty_port_tty_get(&port->port); + if (tty) { + usb_serial_handle_dcd_change(port, tty, + priv->line_status & MSR_STATUS_LINE_DCD); + tty_kref_put(tty); + } + } } - tty_insert_flip_string_fixed_flag(tty, data, tty_flag, + tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag, urb->actual_length); - tty_flip_buffer_push(tty); - tty_kref_put(tty); + tty_flip_buffer_push(&port->port); } static int spcp8x5_wait_modem_info(struct usb_serial_port *port, @@ -651,5 +648,4 @@ static struct usb_serial_driver * const serial_drivers[] = { module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index 868d1e6852e..b57cf841c5b 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -46,8 +46,6 @@ #define FULLPWRBIT 0x00000080 #define NEXT_BOARD_POWER_BIT 0x00000004 -/* Version Information */ -#define DRIVER_VERSION "v0.1" #define DRIVER_DESC "Quatech SSU-100 USB to Serial Driver" #define USB_VENDOR_ID_QUATECH 0x061d /* Quatech VID */ @@ -508,19 +506,16 @@ static void ssu100_dtr_rts(struct usb_serial_port *port, int on) { struct usb_device *dev = port->serial->dev; - mutex_lock(&port->serial->disc_mutex); - if (!port->serial->disconnected) { - /* Disable flow control */ - if (!on && - ssu100_setregister(dev, 0, UART_MCR, 0) < 0) + /* Disable flow control */ + if (!on) { + if (ssu100_setregister(dev, 0, UART_MCR, 0) < 0) dev_err(&port->dev, "error from flowcontrol urb\n"); - /* drop RTS and DTR */ - if (on) - set_mctrl(dev, TIOCM_DTR | TIOCM_RTS); - else - clear_mctrl(dev, TIOCM_DTR | TIOCM_RTS); } - mutex_unlock(&port->serial->disc_mutex); + /* drop RTS and DTR */ + if (on) + set_mctrl(dev, TIOCM_DTR | TIOCM_RTS); + else + clear_mctrl(dev, TIOCM_DTR | TIOCM_RTS); } static void ssu100_update_msr(struct usb_serial_port *port, u8 msr) @@ -584,8 +579,7 @@ static void ssu100_update_lsr(struct usb_serial_port *port, u8 lsr, } -static int ssu100_process_packet(struct urb *urb, - struct tty_struct *tty) +static void ssu100_process_read_urb(struct urb *urb) { struct usb_serial_port *port = urb->context; char *packet = (char *)urb->transfer_buffer; @@ -600,7 +594,8 @@ static int ssu100_process_packet(struct urb *urb, if (packet[2] == 0x00) { ssu100_update_lsr(port, packet[3], &flag); if (flag == TTY_OVERRUN) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); } if (packet[2] == 0x01) ssu100_update_msr(port, packet[3]); @@ -611,34 +606,17 @@ static int ssu100_process_packet(struct urb *urb, ch = packet; if (!len) - return 0; /* status only */ + return; /* status only */ if (port->port.console && port->sysrq) { for (i = 0; i < len; i++, ch++) { if (!usb_serial_handle_sysrq_char(port, *ch)) - tty_insert_flip_char(tty, *ch, flag); + tty_insert_flip_char(&port->port, *ch, flag); } } else - tty_insert_flip_string_fixed_flag(tty, ch, flag, len); - - return len; -} - -static void ssu100_process_read_urb(struct urb *urb) -{ - struct usb_serial_port *port = urb->context; - struct tty_struct *tty; - int count; - - tty = tty_port_tty_get(&port->port); - if (!tty) - return; - - count = ssu100_process_packet(urb, tty); + tty_insert_flip_string_fixed_flag(&port->port, ch, flag, len); - if (count) - tty_flip_buffer_push(tty); - tty_kref_put(tty); + tty_flip_buffer_push(&port->port); } static struct usb_serial_driver ssu100_device = { diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index 701fffa8431..be05e6caf9a 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -48,7 +48,6 @@ static void symbol_int_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; struct usb_serial_port *port = priv->port; int status = urb->status; - struct tty_struct *tty; int result; int data_length; @@ -82,12 +81,8 @@ static void symbol_int_callback(struct urb *urb) * we pretty much just ignore the size and send everything * else to the tty layer. */ - tty = tty_port_tty_get(&port->port); - if (tty) { - tty_insert_flip_string(tty, &data[1], data_length); - tty_flip_buffer_push(tty); - tty_kref_put(tty); - } + tty_insert_flip_string(&port->port, &data[1], data_length); + tty_flip_buffer_push(&port->port); } else { dev_dbg(&priv->udev->dev, "Improper amount of data received from the device, " diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index f2530d2ef3c..39cb9b807c3 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -121,8 +121,8 @@ static void ti_interrupt_callback(struct urb *urb); static void ti_bulk_in_callback(struct urb *urb); static void ti_bulk_out_callback(struct urb *urb); -static void ti_recv(struct device *dev, struct tty_struct *tty, - unsigned char *data, int length); +static void ti_recv(struct usb_serial_port *port, unsigned char *data, + int length); static void ti_send(struct ti_port *tport); static int ti_set_mcr(struct ti_port *tport, unsigned int mcr); static int ti_get_lsr(struct ti_port *tport); @@ -1118,7 +1118,6 @@ static void ti_bulk_in_callback(struct urb *urb) struct device *dev = &urb->dev->dev; int status = urb->status; int retval = 0; - struct tty_struct *tty; switch (status) { case 0: @@ -1145,24 +1144,18 @@ static void ti_bulk_in_callback(struct urb *urb) return; } - tty = tty_port_tty_get(&port->port); - if (tty) { - if (urb->actual_length) { - usb_serial_debug_data(dev, __func__, urb->actual_length, - urb->transfer_buffer); + if (urb->actual_length) { + usb_serial_debug_data(dev, __func__, urb->actual_length, + urb->transfer_buffer); - if (!tport->tp_is_open) - dev_dbg(dev, "%s - port closed, dropping data\n", - __func__); - else - ti_recv(&urb->dev->dev, tty, - urb->transfer_buffer, - urb->actual_length); - spin_lock(&tport->tp_lock); - tport->tp_icount.rx += urb->actual_length; - spin_unlock(&tport->tp_lock); - } - tty_kref_put(tty); + if (!tport->tp_is_open) + dev_dbg(dev, "%s - port closed, dropping data\n", + __func__); + else + ti_recv(port, urb->transfer_buffer, urb->actual_length); + spin_lock(&tport->tp_lock); + tport->tp_icount.rx += urb->actual_length; + spin_unlock(&tport->tp_lock); } exit: @@ -1210,24 +1203,23 @@ static void ti_bulk_out_callback(struct urb *urb) } -static void ti_recv(struct device *dev, struct tty_struct *tty, - unsigned char *data, int length) +static void ti_recv(struct usb_serial_port *port, unsigned char *data, + int length) { int cnt; do { - cnt = tty_insert_flip_string(tty, data, length); + cnt = tty_insert_flip_string(&port->port, data, length); if (cnt < length) { - dev_err(dev, "%s - dropping data, %d bytes lost\n", + dev_err(&port->dev, "%s - dropping data, %d bytes lost\n", __func__, length - cnt); if (cnt == 0) break; } - tty_flip_buffer_push(tty); + tty_flip_buffer_push(&port->port); data += cnt; length -= cnt; } while (length > 0); - } diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 73b8e056916..a19ed74d770 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -361,15 +361,21 @@ static int serial_write_room(struct tty_struct *tty) static int serial_chars_in_buffer(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; + int count = 0; dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + mutex_lock(&serial->disc_mutex); /* if the device was unplugged then any remaining characters fell out of the connector ;) */ - if (port->serial->disconnected) - return 0; - /* pass on to the driver specific version of this function */ - return port->serial->type->chars_in_buffer(tty); + if (serial->disconnected) + count = 0; + else + count = serial->type->chars_in_buffer(tty); + mutex_unlock(&serial->disc_mutex); + + return count; } static void serial_throttle(struct tty_struct *tty) @@ -597,6 +603,7 @@ static void port_release(struct device *dev) kfifo_free(&port->write_fifo); kfree(port->interrupt_in_buffer); kfree(port->interrupt_out_buffer); + tty_port_destroy(&port->port); kfree(port); } @@ -687,10 +694,20 @@ static int serial_carrier_raised(struct tty_port *port) static void serial_dtr_rts(struct tty_port *port, int on) { struct usb_serial_port *p = container_of(port, struct usb_serial_port, port); - struct usb_serial_driver *drv = p->serial->type; + struct usb_serial *serial = p->serial; + struct usb_serial_driver *drv = serial->type; - if (drv->dtr_rts) + if (!drv->dtr_rts) + return; + /* + * Work-around bug in the tty-layer which can result in dtr_rts + * being called after a disconnect (and tty_unregister_device + * has returned). Remove once bug has been squashed. + */ + mutex_lock(&serial->disc_mutex); + if (!serial->disconnected) drv->dtr_rts(p, on); + mutex_unlock(&serial->disc_mutex); } static const struct tty_port_operations serial_port_ops = { diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 61a73ad1a18..571965aa1cc 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -19,7 +19,6 @@ - controlling the baud rate doesn't make sense */ -#define DRIVER_VERSION "v0.7.2" #define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>" #define DRIVER_DESC "USB Driver for GSM modems" @@ -39,7 +38,6 @@ void usb_wwan_dtr_rts(struct usb_serial_port *port, int on) { - struct usb_serial *serial = port->serial; struct usb_wwan_port_private *portdata; struct usb_wwan_intf_private *intfdata; @@ -49,12 +47,11 @@ void usb_wwan_dtr_rts(struct usb_serial_port *port, int on) return; portdata = usb_get_serial_port_data(port); - mutex_lock(&serial->disc_mutex); + /* FIXME: locking */ portdata->rts_state = on; portdata->dtr_state = on; - if (serial->dev) - intfdata->send_setup(port); - mutex_unlock(&serial->disc_mutex); + + intfdata->send_setup(port); } EXPORT_SYMBOL(usb_wwan_dtr_rts); @@ -276,7 +273,6 @@ static void usb_wwan_indat_callback(struct urb *urb) int err; int endpoint; struct usb_serial_port *port; - struct tty_struct *tty; struct device *dev; unsigned char *data = urb->transfer_buffer; int status = urb->status; @@ -289,16 +285,12 @@ static void usb_wwan_indat_callback(struct urb *urb) dev_dbg(dev, "%s: nonzero status: %d on endpoint %02x.\n", __func__, status, endpoint); } else { - tty = tty_port_tty_get(&port->port); - if (tty) { - if (urb->actual_length) { - tty_insert_flip_string(tty, data, - urb->actual_length); - tty_flip_buffer_push(tty); - } else - dev_dbg(dev, "%s: empty read urb received\n", __func__); - tty_kref_put(tty); - } + if (urb->actual_length) { + tty_insert_flip_string(&port->port, data, + urb->actual_length); + tty_flip_buffer_push(&port->port); + } else + dev_dbg(dev, "%s: empty read urb received\n", __func__); /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); @@ -455,9 +447,6 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port, struct usb_serial *serial = port->serial; struct urb *urb; - if (endpoint == -1) - return NULL; /* endpoint not needed */ - urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ if (urb == NULL) { dev_dbg(&serial->interface->dev, @@ -489,6 +478,9 @@ int usb_wwan_port_probe(struct usb_serial_port *port) init_usb_anchor(&portdata->delayed); for (i = 0; i < N_IN_URB; i++) { + if (!port->bulk_in_size) + break; + buffer = (u8 *)__get_free_page(GFP_KERNEL); if (!buffer) goto bail_out_error; @@ -502,8 +494,8 @@ int usb_wwan_port_probe(struct usb_serial_port *port) } for (i = 0; i < N_OUT_URB; i++) { - if (port->bulk_out_endpointAddress == -1) - continue; + if (!port->bulk_out_size) + break; buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL); if (!buffer) @@ -710,5 +702,4 @@ EXPORT_SYMBOL(usb_wwan_resume); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/vivopay-serial.c b/drivers/usb/serial/vivopay-serial.c index 0c0aa876c20..6299526ff8c 100644 --- a/drivers/usb/serial/vivopay-serial.c +++ b/drivers/usb/serial/vivopay-serial.c @@ -10,8 +10,6 @@ #include <linux/usb.h> #include <linux/usb/serial.h> - -#define DRIVER_VERSION "v1.0" #define DRIVER_DESC "ViVOpay USB Serial Driver" #define VIVOPAY_VENDOR_ID 0x1d5f @@ -42,5 +40,4 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR("Forest Bond <forest.bond@outpostembedded.com>"); MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/xsens_mt.c b/drivers/usb/serial/xsens_mt.c new file mode 100644 index 00000000000..1d5798d891b --- /dev/null +++ b/drivers/usb/serial/xsens_mt.c @@ -0,0 +1,86 @@ +/* + * Xsens MT USB driver + * + * Copyright (C) 2013 Xsens <info@xsens.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/uaccess.h> + +#define XSENS_VID 0x2639 + +#define MTi_10_IMU_PID 0x0001 +#define MTi_20_VRU_PID 0x0002 +#define MTi_30_AHRS_PID 0x0003 + +#define MTi_100_IMU_PID 0x0011 +#define MTi_200_VRU_PID 0x0012 +#define MTi_300_AHRS_PID 0x0013 + +#define MTi_G_700_GPS_INS_PID 0x0017 + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(XSENS_VID, MTi_10_IMU_PID) }, + { USB_DEVICE(XSENS_VID, MTi_20_VRU_PID) }, + { USB_DEVICE(XSENS_VID, MTi_30_AHRS_PID) }, + + { USB_DEVICE(XSENS_VID, MTi_100_IMU_PID) }, + { USB_DEVICE(XSENS_VID, MTi_200_VRU_PID) }, + { USB_DEVICE(XSENS_VID, MTi_300_AHRS_PID) }, + + { USB_DEVICE(XSENS_VID, MTi_G_700_GPS_INS_PID) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static int has_required_endpoints(const struct usb_host_interface *interface) +{ + __u8 i; + int has_bulk_in = 0; + int has_bulk_out = 0; + + for (i = 0; i < interface->desc.bNumEndpoints; ++i) { + if (usb_endpoint_is_bulk_in(&interface->endpoint[i].desc)) + has_bulk_in = 1; + else if (usb_endpoint_is_bulk_out(&interface->endpoint[i].desc)) + has_bulk_out = 1; + } + + return has_bulk_in && has_bulk_out; +} + +static int xsens_mt_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + if (!has_required_endpoints(serial->interface->cur_altsetting)) + return -ENODEV; + return 0; +} + +static struct usb_serial_driver xsens_mt_device = { + .driver = { + .owner = THIS_MODULE, + .name = "xsens_mt", + }, + .id_table = id_table, + .num_ports = 1, + + .probe = xsens_mt_probe, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &xsens_mt_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 0ae7bb64b5e..eab04a6b5fb 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -203,7 +203,7 @@ config USB_STORAGE_ENE_UB6250 config USB_UAS tristate "USB Attached SCSI" - depends on USB && SCSI + depends on USB && SCSI && BROKEN help The USB Attached SCSI protocol is supported by some USB storage devices. It permits higher performance by supporting diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index d36446dd7ae..6c3586a4c95 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -455,7 +455,7 @@ static int rts51x_check_status(struct us_data *us, u8 lun) u8 buf[16]; retval = rts51x_read_status(us, lun, buf, 16, &(chip->status_len)); - if (retval < 0) + if (retval != STATUS_SUCCESS) return -EIO; US_DEBUGP("chip->status_len = %d\n", chip->status_len); @@ -883,7 +883,7 @@ static void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) } else { US_DEBUGP("%s: NOT working scsi, not SS\n", __func__); chip->proto_handler_backup(srb, us); - /* Check wether card is plugged in */ + /* Check whether card is plugged in */ if (srb->cmnd[0] == TEST_UNIT_READY) { if (srb->result == SAM_STAT_GOOD) { SET_LUN_READY(chip, srb->device->lun); diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index a3d54366afc..92f35abee92 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -186,6 +186,12 @@ static int slave_configure(struct scsi_device *sdev) /* Some devices don't handle VPD pages correctly */ sdev->skip_vpd_pages = 1; + /* Do not attempt to use REPORT SUPPORTED OPERATION CODES */ + sdev->no_report_opcodes = 1; + + /* Do not attempt to use WRITE SAME */ + sdev->no_write_same = 1; + /* Some disks return the total number of blocks in response * to READ CAPACITY rather than the highest block number. * If this device makes that mistake, tell the sd driver. */ diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index 98b98eef752..d966b59f7d7 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -66,6 +66,8 @@ enum { DATA_OUT_URB_INFLIGHT = (1 << 10), COMMAND_COMPLETED = (1 << 11), COMMAND_ABORTED = (1 << 12), + UNLINK_DATA_URBS = (1 << 13), + IS_IN_WORK_LIST = (1 << 14), }; /* Overrides scsi_pointer */ @@ -82,11 +84,36 @@ struct uas_cmd_info { static int uas_submit_urbs(struct scsi_cmnd *cmnd, struct uas_dev_info *devinfo, gfp_t gfp); static void uas_do_work(struct work_struct *work); +static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller); static DECLARE_WORK(uas_work, uas_do_work); static DEFINE_SPINLOCK(uas_work_lock); static LIST_HEAD(uas_work_list); +static void uas_unlink_data_urbs(struct uas_dev_info *devinfo, + struct uas_cmd_info *cmdinfo) +{ + unsigned long flags; + + /* + * The UNLINK_DATA_URBS flag makes sure uas_try_complete + * (called by urb completion) doesn't release cmdinfo + * underneath us. + */ + spin_lock_irqsave(&devinfo->lock, flags); + cmdinfo->state |= UNLINK_DATA_URBS; + spin_unlock_irqrestore(&devinfo->lock, flags); + + if (cmdinfo->data_in_urb) + usb_unlink_urb(cmdinfo->data_in_urb); + if (cmdinfo->data_out_urb) + usb_unlink_urb(cmdinfo->data_out_urb); + + spin_lock_irqsave(&devinfo->lock, flags); + cmdinfo->state &= ~UNLINK_DATA_URBS; + spin_unlock_irqrestore(&devinfo->lock, flags); +} + static void uas_do_work(struct work_struct *work) { struct uas_cmd_info *cmdinfo; @@ -106,6 +133,8 @@ static void uas_do_work(struct work_struct *work) struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; spin_lock_irqsave(&devinfo->lock, flags); err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC); + if (!err) + cmdinfo->state &= ~IS_IN_WORK_LIST; spin_unlock_irqrestore(&devinfo->lock, flags); if (err) { list_del(&cmdinfo->list); @@ -117,6 +146,45 @@ static void uas_do_work(struct work_struct *work) } } +static void uas_abort_work(struct uas_dev_info *devinfo) +{ + struct uas_cmd_info *cmdinfo; + struct uas_cmd_info *temp; + struct list_head list; + unsigned long flags; + + spin_lock_irq(&uas_work_lock); + list_replace_init(&uas_work_list, &list); + spin_unlock_irq(&uas_work_lock); + + spin_lock_irqsave(&devinfo->lock, flags); + list_for_each_entry_safe(cmdinfo, temp, &list, list) { + struct scsi_pointer *scp = (void *)cmdinfo; + struct scsi_cmnd *cmnd = container_of(scp, + struct scsi_cmnd, SCp); + struct uas_dev_info *di = (void *)cmnd->device->hostdata; + + if (di == devinfo) { + cmdinfo->state |= COMMAND_ABORTED; + cmdinfo->state &= ~IS_IN_WORK_LIST; + if (devinfo->resetting) { + /* uas_stat_cmplt() will not do that + * when a device reset is in + * progress */ + cmdinfo->state &= ~COMMAND_INFLIGHT; + } + uas_try_complete(cmnd, __func__); + } else { + /* not our uas device, relink into list */ + list_del(&cmdinfo->list); + spin_lock_irq(&uas_work_lock); + list_add_tail(&cmdinfo->list, &uas_work_list); + spin_unlock_irq(&uas_work_lock); + } + } + spin_unlock_irqrestore(&devinfo->lock, flags); +} + static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd) { struct sense_iu *sense_iu = urb->transfer_buffer; @@ -168,7 +236,7 @@ static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *caller) struct uas_cmd_info *ci = (void *)&cmnd->SCp; scmd_printk(KERN_INFO, cmnd, "%s %p tag %d, inflight:" - "%s%s%s%s%s%s%s%s%s%s%s%s\n", + "%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n", caller, cmnd, cmnd->request->tag, (ci->state & SUBMIT_STATUS_URB) ? " s-st" : "", (ci->state & ALLOC_DATA_IN_URB) ? " a-in" : "", @@ -181,7 +249,9 @@ static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *caller) (ci->state & DATA_IN_URB_INFLIGHT) ? " IN" : "", (ci->state & DATA_OUT_URB_INFLIGHT) ? " OUT" : "", (ci->state & COMMAND_COMPLETED) ? " done" : "", - (ci->state & COMMAND_ABORTED) ? " abort" : ""); + (ci->state & COMMAND_ABORTED) ? " abort" : "", + (ci->state & UNLINK_DATA_URBS) ? " unlink": "", + (ci->state & IS_IN_WORK_LIST) ? " work" : ""); } static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller) @@ -192,7 +262,8 @@ static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller) WARN_ON(!spin_is_locked(&devinfo->lock)); if (cmdinfo->state & (COMMAND_INFLIGHT | DATA_IN_URB_INFLIGHT | - DATA_OUT_URB_INFLIGHT)) + DATA_OUT_URB_INFLIGHT | + UNLINK_DATA_URBS)) return -EBUSY; BUG_ON(cmdinfo->state & COMMAND_COMPLETED); cmdinfo->state |= COMMAND_COMPLETED; @@ -217,6 +288,7 @@ static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd, if (err) { spin_lock(&uas_work_lock); list_add_tail(&cmdinfo->list, &uas_work_list); + cmdinfo->state |= IS_IN_WORK_LIST; spin_unlock(&uas_work_lock); schedule_work(&uas_work); } @@ -274,16 +346,9 @@ static void uas_stat_cmplt(struct urb *urb) uas_sense(urb, cmnd); if (cmnd->result != 0) { /* cancel data transfers on error */ - if (cmdinfo->state & DATA_IN_URB_INFLIGHT) { - spin_unlock_irqrestore(&devinfo->lock, flags); - usb_unlink_urb(cmdinfo->data_in_urb); - spin_lock_irqsave(&devinfo->lock, flags); - } - if (cmdinfo->state & DATA_OUT_URB_INFLIGHT) { - spin_unlock_irqrestore(&devinfo->lock, flags); - usb_unlink_urb(cmdinfo->data_out_urb); - spin_lock_irqsave(&devinfo->lock, flags); - } + spin_unlock_irqrestore(&devinfo->lock, flags); + uas_unlink_data_urbs(devinfo, cmdinfo); + spin_lock_irqsave(&devinfo->lock, flags); } cmdinfo->state &= ~COMMAND_INFLIGHT; uas_try_complete(cmnd, __func__); @@ -579,6 +644,12 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer)); + if (devinfo->resetting) { + cmnd->result = DID_ERROR << 16; + cmnd->scsi_done(cmnd); + return 0; + } + spin_lock_irqsave(&devinfo->lock, flags); if (devinfo->cmnd) { spin_unlock_irqrestore(&devinfo->lock, flags); @@ -623,6 +694,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, } spin_lock(&uas_work_lock); list_add_tail(&cmdinfo->list, &uas_work_list); + cmdinfo->state |= IS_IN_WORK_LIST; spin_unlock(&uas_work_lock); schedule_work(&uas_work); } @@ -689,8 +761,23 @@ static int uas_eh_abort_handler(struct scsi_cmnd *cmnd) uas_log_cmd_state(cmnd, __func__); spin_lock_irqsave(&devinfo->lock, flags); cmdinfo->state |= COMMAND_ABORTED; - spin_unlock_irqrestore(&devinfo->lock, flags); - ret = uas_eh_task_mgmt(cmnd, "ABORT TASK", TMF_ABORT_TASK); + if (cmdinfo->state & IS_IN_WORK_LIST) { + spin_lock(&uas_work_lock); + list_del(&cmdinfo->list); + cmdinfo->state &= ~IS_IN_WORK_LIST; + spin_unlock(&uas_work_lock); + } + if (cmdinfo->state & COMMAND_INFLIGHT) { + spin_unlock_irqrestore(&devinfo->lock, flags); + ret = uas_eh_task_mgmt(cmnd, "ABORT TASK", TMF_ABORT_TASK); + } else { + spin_unlock_irqrestore(&devinfo->lock, flags); + uas_unlink_data_urbs(devinfo, cmdinfo); + spin_lock_irqsave(&devinfo->lock, flags); + uas_try_complete(cmnd, __func__); + spin_unlock_irqrestore(&devinfo->lock, flags); + ret = SUCCESS; + } return ret; } @@ -709,6 +796,7 @@ static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd) int err; devinfo->resetting = 1; + uas_abort_work(devinfo); usb_kill_anchored_urbs(&devinfo->cmd_urbs); usb_kill_anchored_urbs(&devinfo->sense_urbs); usb_kill_anchored_urbs(&devinfo->data_urbs); @@ -903,6 +991,8 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id) shost->max_cmd_len = 16 + 252; shost->max_id = 1; + shost->max_lun = 256; + shost->max_channel = 0; shost->sg_tablesize = udev->bus->sg_tablesize; devinfo->intf = intf; @@ -954,10 +1044,12 @@ static void uas_disconnect(struct usb_interface *intf) struct Scsi_Host *shost = usb_get_intfdata(intf); struct uas_dev_info *devinfo = (void *)shost->hostdata[0]; - scsi_remove_host(shost); + devinfo->resetting = 1; + uas_abort_work(devinfo); usb_kill_anchored_urbs(&devinfo->cmd_urbs); usb_kill_anchored_urbs(&devinfo->sense_urbs); usb_kill_anchored_urbs(&devinfo->data_urbs); + scsi_remove_host(shost); uas_free_streams(devinfo); kfree(devinfo); } diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h index 2c855302622..65a6a75066a 100644 --- a/drivers/usb/storage/unusual_cypress.h +++ b/drivers/usb/storage/unusual_cypress.h @@ -31,7 +31,7 @@ UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999, "Cypress ISD-300LP", USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0), -UNUSUAL_DEV( 0x14cd, 0x6116, 0x0000, 0x9999, +UNUSUAL_DEV( 0x14cd, 0x6116, 0x0000, 0x0219, "Super Top", "USB 2.0 SATA BRIDGE", USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0), diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index d305a5aa3a5..da04a074e79 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -53,6 +53,14 @@ * as opposed to devices that do something strangely or wrongly. */ +/* In-kernel mode switching is deprecated. Do not add new devices to + * this list for the sole purpose of switching them to a different + * mode. Existing userspace solutions are superior. + * + * New mode switching devices should instead be added to the database + * maintained at http://www.draisberghof.de/usb_modeswitch/ + */ + #if !defined(CONFIG_USB_STORAGE_SDDR09) && \ !defined(CONFIG_USB_STORAGE_SDDR09_MODULE) #define NO_SDDR09 diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 12aa72630ae..d6bee407af0 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -120,6 +120,17 @@ MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks"); .useTransport = use_transport, \ } +#define UNUSUAL_VENDOR_INTF(idVendor, cl, sc, pr, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + static struct us_unusual_dev us_unusual_dev_list[] = { # include "unusual_devs.h" { } /* Terminating entry */ @@ -131,6 +142,7 @@ static struct us_unusual_dev for_dynamic_ids = #undef UNUSUAL_DEV #undef COMPLIANT_DEV #undef USUAL_DEV +#undef UNUSUAL_VENDOR_INTF #ifdef CONFIG_LOCKDEP @@ -925,7 +937,6 @@ int usb_stor_probe1(struct us_data **pus, host->max_cmd_len = 16; host->sg_tablesize = usb_stor_sg_tablesize(intf); *pus = us = host_to_us(host); - memset(us, 0, sizeof(struct us_data)); mutex_init(&(us->dev_mutex)); us_set_lock_class(&us->dev_mutex, intf); init_completion(&us->cmnd_ready); @@ -977,6 +988,9 @@ int usb_stor_probe2(struct us_data *us) if (us->fflags & US_FL_SINGLE_LUN) us->max_lun = 0; + if (!(us->fflags & US_FL_SCM_MULT_TARG)) + us_to_host(us)->max_id = 1; + /* Find the endpoints and calculate pipe values */ result = get_pipes(us); if (result) diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c index b78a526910f..5ef8ce74aae 100644 --- a/drivers/usb/storage/usual-tables.c +++ b/drivers/usb/storage/usual-tables.c @@ -41,6 +41,20 @@ #define USUAL_DEV(useProto, useTrans) \ { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans) } +/* Define the device is matched with Vendor ID and interface descriptors */ +#define UNUSUAL_VENDOR_INTF(id_vendor, cl, sc, pr, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ \ + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO \ + | USB_DEVICE_ID_MATCH_VENDOR, \ + .idVendor = (id_vendor), \ + .bInterfaceClass = (cl), \ + .bInterfaceSubClass = (sc), \ + .bInterfaceProtocol = (pr), \ + .driver_info = (flags) \ +} + struct usb_device_id usb_storage_usb_ids[] = { # include "unusual_devs.h" { } /* Terminating entry */ @@ -50,6 +64,7 @@ MODULE_DEVICE_TABLE(usb, usb_storage_usb_ids); #undef UNUSUAL_DEV #undef COMPLIANT_DEV #undef USUAL_DEV +#undef UNUSUAL_VENDOR_INTF /* * The table of devices to ignore diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index 0616f235bd6..ce310170829 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -105,20 +105,15 @@ static int skel_open(struct inode *inode, struct file *file) goto exit; } - /* increment our usage count for the device */ - kref_get(&dev->kref); - - /* lock the device to allow correctly handling errors - * in resumption */ - mutex_lock(&dev->io_mutex); - retval = usb_autopm_get_interface(interface); if (retval) - goto out_err; + goto exit; + + /* increment our usage count for the device */ + kref_get(&dev->kref); /* save our object in the file's private structure */ file->private_data = dev; - mutex_unlock(&dev->io_mutex); exit: return retval; diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index 231009af65a..1d365316960 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -847,19 +847,6 @@ static void wusb_dev_bos_rm(struct wusb_dev *wusb_dev) wusb_dev->wusb_cap_descr = NULL; }; -static struct usb_wireless_cap_descriptor wusb_cap_descr_default = { - .bLength = sizeof(wusb_cap_descr_default), - .bDescriptorType = USB_DT_DEVICE_CAPABILITY, - .bDevCapabilityType = USB_CAP_TYPE_WIRELESS_USB, - - .bmAttributes = USB_WIRELESS_BEACON_NONE, - .wPHYRates = cpu_to_le16(USB_WIRELESS_PHY_53), - .bmTFITXPowerInfo = 0, - .bmFFITXPowerInfo = 0, - .bmBandGroup = cpu_to_le16(0x0001), /* WUSB1.0[7.4.1] bottom */ - .bReserved = 0 -}; - /* * USB stack's device addition Notifier Callback * diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c index 57c01ab09ad..6ef94bce8c0 100644 --- a/drivers/usb/wusbcore/wa-xfer.c +++ b/drivers/usb/wusbcore/wa-xfer.c @@ -695,9 +695,9 @@ error_dto_alloc: cnt--; error_seg_kzalloc: /* use the fact that cnt is left at were it failed */ - for (; cnt > 0; cnt--) { - if (xfer->is_inbound == 0) - kfree(xfer->seg[cnt]->dto_urb); + for (; cnt >= 0; cnt--) { + if (xfer->seg[cnt] && xfer->is_inbound == 0) + usb_free_urb(xfer->seg[cnt]->dto_urb); kfree(xfer->seg[cnt]); } error_segs_kzalloc: |