diff options
Diffstat (limited to 'drivers/usb')
32 files changed, 225 insertions, 133 deletions
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 49b098bedf9..475c9c11468 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -276,8 +276,9 @@ static void ci_role_work(struct work_struct *work) ci_role_stop(ci); ci_role_start(ci, role); - enable_irq(ci->irq); } + + enable_irq(ci->irq); } static irqreturn_t ci_irq(int irq, void *data) diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 519ead2443c..b501346484a 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1678,8 +1678,11 @@ static int udc_start(struct ci13xxx *ci) ci->gadget.ep0 = &ci->ep0in->ep; - if (ci->global_phy) + if (ci->global_phy) { ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + if (IS_ERR(ci->transceiver)) + ci->transceiver = NULL; + } if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) { if (ci->transceiver == NULL) { @@ -1694,7 +1697,7 @@ static int udc_start(struct ci13xxx *ci) goto put_transceiver; } - if (!IS_ERR_OR_NULL(ci->transceiver)) { + if (ci->transceiver) { retval = otg_set_peripheral(ci->transceiver->otg, &ci->gadget); if (retval) @@ -1711,7 +1714,7 @@ static int udc_start(struct ci13xxx *ci) return retval; remove_trans: - if (!IS_ERR_OR_NULL(ci->transceiver)) { + if (ci->transceiver) { otg_set_peripheral(ci->transceiver->otg, NULL); if (ci->global_phy) usb_put_phy(ci->transceiver); @@ -1719,7 +1722,7 @@ remove_trans: dev_err(dev, "error = %i\n", retval); put_transceiver: - if (!IS_ERR_OR_NULL(ci->transceiver) && ci->global_phy) + if (ci->transceiver && ci->global_phy) usb_put_phy(ci->transceiver); destroy_eps: destroy_eps(ci); @@ -1747,7 +1750,7 @@ static void udc_stop(struct ci13xxx *ci) dma_pool_destroy(ci->td_pool); dma_pool_destroy(ci->qh_pool); - if (!IS_ERR_OR_NULL(ci->transceiver)) { + if (ci->transceiver) { otg_set_peripheral(ci->transceiver->otg, NULL); if (ci->global_phy) usb_put_phy(ci->transceiver); diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index caefc800f29..c88c4fb9459 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1287,9 +1287,13 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, goto error; } for (totlen = u = 0; u < uurb->number_of_packets; u++) { - /* arbitrary limit, - * sufficient for USB 2.0 high-bandwidth iso */ - if (isopkt[u].length > 8192) { + /* + * arbitrary limit need for USB 3.0 + * bMaxBurst (0~15 allowed, 1~16 packets) + * bmAttributes (bit 1:0, mult 0~2, 1~3 packets) + * sizemax: 1024 * 16 * 3 = 49152 + */ + if (isopkt[u].length > 49152) { ret = -EINVAL; goto error; } diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index 929e7dd6e58..8ce9d7fd6cf 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -164,9 +164,9 @@ static int dwc3_exynos_remove(struct platform_device *pdev) { struct dwc3_exynos *exynos = platform_get_drvdata(pdev); + device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child); platform_device_unregister(exynos->usb2_phy); platform_device_unregister(exynos->usb3_phy); - device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child); clk_disable_unprepare(exynos->clk); diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 227d4a7acad..eba9e2baf32 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -196,9 +196,9 @@ static void dwc3_pci_remove(struct pci_dev *pci) { struct dwc3_pci *glue = pci_get_drvdata(pci); + platform_device_unregister(glue->dwc3); platform_device_unregister(glue->usb2_phy); platform_device_unregister(glue->usb3_phy); - platform_device_unregister(glue->dwc3); pci_set_drvdata(pci, NULL); pci_disable_device(pci); } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 2b6e7e00120..b5e5b35df49 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1706,11 +1706,19 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc) dep = dwc->eps[epnum]; if (!dep) continue; - - dwc3_free_trb_pool(dep); - - if (epnum != 0 && epnum != 1) + /* + * Physical endpoints 0 and 1 are special; they form the + * bi-directional USB endpoint 0. + * + * For those two physical endpoints, we don't allocate a TRB + * pool nor do we add them the endpoints list. Due to that, we + * shouldn't do these two operations otherwise we would end up + * with all sorts of bugs when removing dwc3.ko. + */ + if (epnum != 0 && epnum != 1) { + dwc3_free_trb_pool(dep); list_del(&dep->endpoint.ep_list); + } kfree(dep); } diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index acff5b8f6e8..f80d0330d54 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -213,7 +213,7 @@ static inline unsigned char tt_start_uframe(struct ehci_hcd *ehci, __hc32 mask) } static const unsigned char -max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 125, 25 }; +max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 }; /* carryover low/fullspeed bandwidth that crosses uframe boundries */ static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8]) @@ -646,6 +646,10 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh) /* reschedule QH iff another request is queued */ if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) { rc = qh_schedule(ehci, qh); + if (rc == 0) { + qh_refresh(ehci, qh); + qh_link_periodic(ehci, qh); + } /* An error here likely indicates handshake failure * or no space left in the schedule. Neither fault @@ -653,9 +657,10 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh) * * FIXME kill the now-dysfunctional queued urbs */ - if (rc != 0) + else { ehci_err(ehci, "can't reschedule qh %p, err %d\n", qh, rc); + } } /* maybe turn off periodic schedule */ diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 2cfc465925b..fbf75e57628 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1827,6 +1827,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) } spin_unlock_irqrestore(&xhci->lock, flags); + if (!xhci->rh_bw) + goto no_bw; + num_ports = HCS_MAX_PORTS(xhci->hcs_params1); for (i = 0; i < num_ports; i++) { struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table; @@ -1845,6 +1848,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) } } +no_bw: xhci->num_usb2_ports = 0; xhci->num_usb3_ports = 0; xhci->num_active_eps = 0; @@ -2256,6 +2260,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) u32 page_size, temp; int i; + INIT_LIST_HEAD(&xhci->lpm_failed_devs); + INIT_LIST_HEAD(&xhci->cancel_cmd_list); + page_size = xhci_readl(xhci, &xhci->op_regs->page_size); xhci_dbg(xhci, "Supported page size register = 0x%x\n", page_size); for (i = 0; i < 16; i++) { @@ -2334,7 +2341,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags); if (!xhci->cmd_ring) goto fail; - INIT_LIST_HEAD(&xhci->cancel_cmd_list); xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring); xhci_dbg(xhci, "First segment DMA is 0x%llx\n", (unsigned long long)xhci->cmd_ring->first_seg->dma); @@ -2445,8 +2451,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) if (xhci_setup_port_arrays(xhci, flags)) goto fail; - INIT_LIST_HEAD(&xhci->lpm_failed_devs); - /* Enable USB 3.0 device notifications for function remote wake, which * is necessary for allowing USB 3.0 devices to do remote wakeup from * U3 (device suspend). diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 1a30c380043..cc24e39b97d 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -221,6 +221,14 @@ static void xhci_pci_remove(struct pci_dev *dev) static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + + /* + * Systems with the TI redriver that loses port status change events + * need to have the registers polled during D3, so avoid D3cold. + */ + if (xhci_compliance_mode_recovery_timer_quirk_check()) + pdev->no_d3cold = true; return xhci_suspend(xhci); } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index b4aa79d154b..d8f640b12dd 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -466,7 +466,7 @@ static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci) * Systems: * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820 */ -static bool compliance_mode_recovery_timer_quirk_check(void) +bool xhci_compliance_mode_recovery_timer_quirk_check(void) { const char *dmi_product_name, *dmi_sys_vendor; @@ -517,7 +517,7 @@ int xhci_init(struct usb_hcd *hcd) xhci_dbg(xhci, "Finished xhci_init\n"); /* Initializing Compliance Mode Recovery Data If Needed */ - if (compliance_mode_recovery_timer_quirk_check()) { + if (xhci_compliance_mode_recovery_timer_quirk_check()) { xhci->quirks |= XHCI_COMP_MODE_QUIRK; compliance_mode_recovery_timer_init(xhci); } @@ -956,6 +956,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) struct usb_hcd *hcd = xhci_to_hcd(xhci); struct usb_hcd *secondary_hcd; int retval = 0; + bool comp_timer_running = false; /* Wait a bit if either of the roothubs need to settle from the * transition into bus suspend. @@ -993,6 +994,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* If restore operation fails, re-initialize the HC during resume */ if ((temp & STS_SRE) || hibernated) { + + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && + !(xhci_all_ports_seen_u0(xhci))) { + del_timer_sync(&xhci->comp_mode_recovery_timer); + xhci_dbg(xhci, "Compliance Mode Recovery Timer deleted!\n"); + } + /* Let the USB core know _both_ roothubs lost power. */ usb_root_hub_lost_power(xhci->main_hcd->self.root_hub); usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub); @@ -1035,6 +1043,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) retval = xhci_init(hcd->primary_hcd); if (retval) return retval; + comp_timer_running = true; + xhci_dbg(xhci, "Start the primary HCD\n"); retval = xhci_run(hcd->primary_hcd); if (!retval) { @@ -1076,7 +1086,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) * to suffer the Compliance Mode issue again. It doesn't matter if * ports have entered previously to U0 before system's suspension. */ - if (xhci->quirks & XHCI_COMP_MODE_QUIRK) + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running) compliance_mode_recovery_timer_init(xhci); /* Re-enable port polling. */ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 29c978e3713..77600cefcaf 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1853,4 +1853,7 @@ struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx); struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index); +/* xHCI quirks */ +bool xhci_compliance_mode_recovery_timer_quirk_check(void); + #endif /* __LINUX_XHCI_HCD_H */ diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 8914dec49f0..9d3044bdebe 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1232,7 +1232,6 @@ void musb_host_tx(struct musb *musb, u8 epnum) void __iomem *mbase = musb->mregs; struct dma_channel *dma; bool transfer_pending = false; - static bool use_sg; musb_ep_select(mbase, epnum); tx_csr = musb_readw(epio, MUSB_TXCSR); @@ -1463,9 +1462,9 @@ done: * NULL. */ if (!urb->transfer_buffer) - use_sg = true; + qh->use_sg = true; - if (use_sg) { + if (qh->use_sg) { /* sg_miter_start is already done in musb_ep_program */ if (!sg_miter_next(&qh->sg_miter)) { dev_err(musb->controller, "error: sg list empty\n"); @@ -1484,9 +1483,9 @@ done: qh->segsize = length; - if (use_sg) { + if (qh->use_sg) { if (offset + length >= urb->transfer_buffer_length) - use_sg = false; + qh->use_sg = false; } musb_ep_select(mbase, epnum); @@ -1552,7 +1551,6 @@ void musb_host_rx(struct musb *musb, u8 epnum) bool done = false; u32 status; struct dma_channel *dma; - static bool use_sg; unsigned int sg_flags = SG_MITER_ATOMIC | SG_MITER_TO_SG; musb_ep_select(mbase, epnum); @@ -1878,12 +1876,12 @@ void musb_host_rx(struct musb *musb, u8 epnum) * NULL. */ if (!urb->transfer_buffer) { - use_sg = true; + qh->use_sg = true; sg_miter_start(&qh->sg_miter, urb->sg, 1, sg_flags); } - if (use_sg) { + if (qh->use_sg) { if (!sg_miter_next(&qh->sg_miter)) { dev_err(musb->controller, "error: sg list empty\n"); sg_miter_stop(&qh->sg_miter); @@ -1913,8 +1911,8 @@ finish: urb->actual_length += xfer_len; qh->offset += xfer_len; if (done) { - if (use_sg) - use_sg = false; + if (qh->use_sg) + qh->use_sg = false; if (urb->status == -EINPROGRESS) urb->status = status; diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h index 5a9c8feec10..738f7eb60df 100644 --- a/drivers/usb/musb/musb_host.h +++ b/drivers/usb/musb/musb_host.h @@ -74,6 +74,7 @@ struct musb_qh { u16 frame; /* for periodic schedule */ unsigned iso_idx; /* in urb->iso_frame_desc[] */ struct sg_mapping_iter sg_miter; /* for highmem in PIO mode */ + bool use_sg; /* to track urb using sglist */ }; /* map from control or bulk queue head to the first qh on that ring */ diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 7ef3eb8617a..2311b1e4e43 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -4,11 +4,17 @@ menuconfig USB_PHY bool "USB Physical Layer drivers" help - USB controllers (those which are host, device or DRD) need a - device to handle the physical layer signalling, commonly called - a PHY. + Most USB controllers have the physical layer signalling part + (commonly called a PHY) built in. However, dual-role devices + (a.k.a. USB on-the-go) which support being USB master or slave + with the same connector often use an external PHY. - The following drivers add support for such PHY devices. + The drivers in this submenu add support for such PHY devices. + They are not needed for standard master-only (or the vast + majority of slave-only) USB interfaces. + + If you're not sure if this applies to you, it probably doesn't; + say N here. if USB_PHY diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 3b16118cbf6..40e7fd94646 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -43,7 +43,7 @@ #define DRIVER_NAME "ark3116" /* usb timeout of 1 second */ -#define ARK_TIMEOUT (1*HZ) +#define ARK_TIMEOUT 1000 static const struct usb_device_id id_table[] = { { USB_DEVICE(0x6547, 0x0232) }, diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index d341555d37d..082120198f8 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -65,6 +65,7 @@ static const struct usb_device_id id_table_earthmate[] = { static const struct usb_device_id id_table_cyphidcomrs232[] = { { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, + { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, { } /* Terminating entry */ }; @@ -78,6 +79,7 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, + { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) }, { } /* Terminating entry */ }; @@ -229,6 +231,12 @@ static struct usb_serial_driver * const serial_drivers[] = { * Cypress serial helper functions *****************************************************************************/ +/* FRWD Dongle hidcom needs to skip reset and speed checks */ +static inline bool is_frwd(struct usb_device *dev) +{ + return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) && + (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD)); +} static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) { @@ -238,6 +246,10 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) if (unstable_bauds) return new_rate; + /* FRWD Dongle uses 115200 bps */ + if (is_frwd(port->serial->dev)) + return new_rate; + /* * The general purpose firmware for the Cypress M8 allows for * a maximum speed of 57600bps (I have no idea whether DeLorme @@ -448,7 +460,11 @@ static int cypress_generic_port_probe(struct usb_serial_port *port) return -ENOMEM; } - usb_reset_configuration(serial->dev); + /* Skip reset for FRWD device. It is a workaound: + device hangs if it receives SET_CONFIGURE in Configured + state. */ + if (!is_frwd(serial->dev)) + usb_reset_configuration(serial->dev); priv->cmd_ctrl = 0; priv->line_control = 0; diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h index 67cf6082688..b461311a2ae 100644 --- a/drivers/usb/serial/cypress_m8.h +++ b/drivers/usb/serial/cypress_m8.h @@ -24,6 +24,10 @@ #define VENDOR_ID_CYPRESS 0x04b4 #define PRODUCT_ID_CYPHIDCOM 0x5500 +/* FRWD Dongle - a GPS sports watch */ +#define VENDOR_ID_FRWD 0x6737 +#define PRODUCT_ID_CYPHIDCOM_FRWD 0x0001 + /* Powercom UPS, chip CY7C63723 */ #define VENDOR_ID_POWERCOM 0x0d9f #define PRODUCT_ID_UPS 0x0002 diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index 090b411d893..7d8dd5aad23 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -165,11 +165,12 @@ static void f81232_set_termios(struct tty_struct *tty, /* FIXME - Stubbed out for now */ /* Don't change anything if nothing has changed */ - if (!tty_termios_hw_change(&tty->termios, old_termios)) + if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) return; /* Do the real work here... */ - tty_termios_copy_hw(&tty->termios, old_termios); + if (old_termios) + tty_termios_copy_hw(&tty->termios, old_termios); } static int f81232_tiocmget(struct tty_struct *tty) @@ -187,12 +188,11 @@ static int f81232_tiocmset(struct tty_struct *tty, static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port) { - struct ktermios tmp_termios; int result; /* Setup termios */ if (tty) - f81232_set_termios(tty, port, &tmp_termios); + f81232_set_termios(tty, port, NULL); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) { diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 9d74c278b7b..790673e5faa 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -287,7 +287,7 @@ static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count) usb_bulk_msg(serial->dev, usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress), buf, - count, &actual, HZ * 1); + count, &actual, 1000); if (status != IUU_OPERATION_OK) dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status); @@ -307,7 +307,7 @@ static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count) usb_bulk_msg(serial->dev, usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), buf, - count, &actual, HZ * 1); + count, &actual, 1000); if (status != IUU_OPERATION_OK) dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index eb30d7b01f3..3549d073df2 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1548,7 +1548,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, struct keyspan_serial_private *s_priv; struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; - int outcont_urb; struct urb *this_urb; int device_port, err; @@ -1559,7 +1558,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, d_details = s_priv->device_details; device_port = port->number - port->serial->minor; - outcont_urb = d_details->outcont_endpoints[port->number]; this_urb = p_priv->outcont_urb; dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe)); @@ -1685,14 +1683,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); -#if 0 - else { - dev_dbg(&port->dev, "%s - usb_submit_urb(%d) OK %d bytes (end %d)\n", __func__ - outcont_urb, this_urb->transfer_buffer_length, - usb_pipeendpoint(this_urb->pipe)); - } -#endif - return 0; } diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index cc0e54345df..f27c621a929 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -40,7 +40,7 @@ #define DRIVER_DESC "Moschip USB Serial Driver" /* default urb timeout */ -#define MOS_WDR_TIMEOUT (HZ * 5) +#define MOS_WDR_TIMEOUT 5000 #define MOS_MAX_PORT 0x02 #define MOS_WRITE 0x0E @@ -227,11 +227,22 @@ static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum, __u8 requesttype = (__u8)0xc0; __u16 index = get_reg_index(reg); __u16 value = get_reg_value(reg, serial_portnum); - int status = usb_control_msg(usbdev, pipe, request, requesttype, value, - index, data, 1, MOS_WDR_TIMEOUT); - if (status < 0) + u8 *buf; + int status; + + buf = kmalloc(1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + status = usb_control_msg(usbdev, pipe, request, requesttype, value, + index, buf, 1, MOS_WDR_TIMEOUT); + if (status == 1) + *data = *buf; + else if (status < 0) dev_err(&usbdev->dev, "mos7720: usb_control_msg() failed: %d", status); + kfree(buf); + return status; } @@ -1618,7 +1629,7 @@ static void change_port_settings(struct tty_struct *tty, mos7720_port->shadowMCR |= (UART_MCR_XONANY); /* To set hardware flow control to the specified * * serial port, in SP1/2_CONTROL_REG */ - if (port->number) + if (port_number) write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01); else write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02); @@ -1927,7 +1938,7 @@ static int mos7720_startup(struct usb_serial *serial) /* setting configuration feature to one */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ); + (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000); /* start the interrupt urb */ ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); @@ -1970,7 +1981,7 @@ static void mos7720_release(struct usb_serial *serial) /* wait for synchronous usb calls to return */ if (mos_parport->msg_pending) wait_for_completion_timeout(&mos_parport->syncmsg_compl, - MOS_WDR_TIMEOUT); + msecs_to_jiffies(MOS_WDR_TIMEOUT)); parport_remove_port(mos_parport->pp); usb_set_serial_data(serial, NULL); diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index a0d5ea54598..7e998081e1c 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2142,13 +2142,21 @@ static int mos7840_ioctl(struct tty_struct *tty, static int mos7810_check(struct usb_serial *serial) { int i, pass_count = 0; + u8 *buf; __u16 data = 0, mcr_data = 0; __u16 test_pattern = 0x55AA; + int res; + + buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL); + if (!buf) + return 0; /* failed to identify 7810 */ /* Store MCR setting */ - usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ, MCS_RD_RTYPE, 0x0300, MODEM_CONTROL_REGISTER, - &mcr_data, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + if (res == VENDOR_READ_LENGTH) + mcr_data = *buf; for (i = 0; i < 16; i++) { /* Send the 1-bit test pattern out to MCS7810 test pin */ @@ -2158,9 +2166,12 @@ static int mos7810_check(struct usb_serial *serial) MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT); /* Read the test pattern back */ - usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data, - VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + res = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ, + MCS_RD_RTYPE, 0, GPIO_REGISTER, buf, + VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + if (res == VENDOR_READ_LENGTH) + data = *buf; /* If this is a MCS7810 device, both test patterns must match */ if (((test_pattern >> i) ^ (~data >> 1)) & 0x0001) @@ -2174,6 +2185,8 @@ static int mos7810_check(struct usb_serial *serial) MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT); + kfree(buf); + if (pass_count == 16) return 1; @@ -2183,11 +2196,17 @@ static int mos7810_check(struct usb_serial *serial) static int mos7840_calc_num_ports(struct usb_serial *serial) { __u16 data = 0x00; + u8 *buf; int mos7840_num_ports; - usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data, - VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL); + if (buf) { + usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, buf, + VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + data = *buf; + kfree(buf); + } if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 || serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) { diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 93d02bc4eb5..bd4323ddae1 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -250,13 +250,7 @@ static void option_instat_callback(struct urb *urb); #define ZTE_PRODUCT_MF622 0x0001 #define ZTE_PRODUCT_MF628 0x0015 #define ZTE_PRODUCT_MF626 0x0031 -#define ZTE_PRODUCT_CDMA_TECH 0xfffe -#define ZTE_PRODUCT_AC8710 0xfff1 -#define ZTE_PRODUCT_AC2726 0xfff5 -#define ZTE_PRODUCT_AC8710T 0xffff #define ZTE_PRODUCT_MC2718 0xffe8 -#define ZTE_PRODUCT_AD3812 0xffeb -#define ZTE_PRODUCT_MC2716 0xffed #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 @@ -495,18 +489,10 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = { .reserved = BIT(4), }; -static const struct option_blacklist_info zte_ad3812_z_blacklist = { - .sendsetup = BIT(0) | BIT(1) | BIT(2), -}; - static const struct option_blacklist_info zte_mc2718_z_blacklist = { .sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4), }; -static const struct option_blacklist_info zte_mc2716_z_blacklist = { - .sendsetup = BIT(1) | BIT(2) | BIT(3), -}; - static const struct option_blacklist_info huawei_cdc12_blacklist = { .reserved = BIT(1) | BIT(2), }; @@ -593,6 +579,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x14ac, 0xff, 0xff, 0xff), /* Huawei E1820 */ + .driver_info = (kernel_ulong_t) &net_intf1_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) }, @@ -797,7 +785,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012, 0xff) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, - { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */ @@ -1199,16 +1186,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) }, + /* NOTE: most ZTE CDMA devices should be driven by zte_ev, not option */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) }, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 7151659367a..048cd44d51b 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -284,7 +284,7 @@ static void pl2303_set_termios(struct tty_struct *tty, serial settings even to the same values as before. Thus we actually need to filter in this specific case */ - if (!tty_termios_hw_change(&tty->termios, old_termios)) + if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) return; cflag = tty->termios.c_cflag; @@ -293,7 +293,8 @@ static void pl2303_set_termios(struct tty_struct *tty, if (!buf) { dev_err(&port->dev, "%s - out of memory.\n", __func__); /* Report back no change occurred */ - tty->termios = *old_termios; + if (old_termios) + tty->termios = *old_termios; return; } @@ -433,7 +434,7 @@ static void pl2303_set_termios(struct tty_struct *tty, control = priv->line_control; if ((cflag & CBAUD) == B0) priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); - else if ((old_termios->c_cflag & CBAUD) == B0) + else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) priv->line_control |= (CONTROL_DTR | CONTROL_RTS); if (control != priv->line_control) { control = priv->line_control; @@ -492,7 +493,6 @@ static void pl2303_close(struct usb_serial_port *port) static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) { - struct ktermios tmp_termios; struct usb_serial *serial = port->serial; struct pl2303_serial_private *spriv = usb_get_serial_data(serial); int result; @@ -508,7 +508,7 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) /* Setup termios */ if (tty) - pl2303_set_termios(tty, port, &tmp_termios); + pl2303_set_termios(tty, port, NULL); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) { diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 59b32b78212..bd794b43898 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -118,6 +118,7 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */ {USB_DEVICE(0x12D1, 0x14F0)}, /* Sony Gobi 3000 QDL */ {USB_DEVICE(0x12D1, 0x14F1)}, /* Sony Gobi 3000 Composite */ + {USB_DEVICE(0x0AF0, 0x8120)}, /* Option GTM681W */ /* non Gobi Qualcomm serial devices */ {USB_DEVICE_INTERFACE_NUMBER(0x0f3d, 0x68a2, 0)}, /* Sierra Wireless MC7700 Device Management */ diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index cf3df793c2b..ddf6c47137d 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -291,7 +291,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty, struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int cflag = tty->termios.c_cflag; - unsigned int old_cflag = old_termios->c_cflag; unsigned short uartdata; unsigned char buf[2] = {0, 0}; int baud; @@ -299,15 +298,15 @@ static void spcp8x5_set_termios(struct tty_struct *tty, u8 control; /* check that they really want us to change something */ - if (!tty_termios_hw_change(&tty->termios, old_termios)) + if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) return; /* set DTR/RTS active */ spin_lock_irqsave(&priv->lock, flags); control = priv->line_control; - if ((old_cflag & CBAUD) == B0) { + if (old_termios && (old_termios->c_cflag & CBAUD) == B0) { priv->line_control |= MCR_DTR; - if (!(old_cflag & CRTSCTS)) + if (!(old_termios->c_cflag & CRTSCTS)) priv->line_control |= MCR_RTS; } if (control != priv->line_control) { @@ -394,7 +393,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty, static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port) { - struct ktermios tmp_termios; struct usb_serial *serial = port->serial; struct spcp8x5_private *priv = usb_get_serial_port_data(port); int ret; @@ -411,7 +409,7 @@ static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port) spcp8x5_set_ctrl_line(port, priv->line_control); if (tty) - spcp8x5_set_termios(tty, port, &tmp_termios); + spcp8x5_set_termios(tty, port, NULL); port->port.drain_delay = 256; diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index c92c5ed4e58..e581c2549a5 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -172,7 +172,8 @@ static struct usb_device_id ti_id_table_3410[15+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, - { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) }, + { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STEREO_PLUG_ID) }, + { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) }, { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) }, }; diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index b353e7e3d48..4a2423e84d5 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -52,7 +52,9 @@ /* Abbott Diabetics vendor and product ids */ #define ABBOTT_VENDOR_ID 0x1a61 -#define ABBOTT_PRODUCT_ID 0x3410 +#define ABBOTT_STEREO_PLUG_ID 0x3410 +#define ABBOTT_PRODUCT_ID ABBOTT_STEREO_PLUG_ID +#define ABBOTT_STRIP_PORT_ID 0x3420 /* Commands */ #define TI_GET_VERSION 0x01 diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 4753c005cfb..5f6b1ff9d29 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -408,7 +408,7 @@ static int serial_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; - int retval = -ENODEV; + int retval = -ENOIOCTLCMD; dev_dbg(tty->dev, "%s - cmd 0x%.4x\n", __func__, cmd); @@ -420,8 +420,6 @@ static int serial_ioctl(struct tty_struct *tty, default: if (port->serial->type->ioctl) retval = port->serial->type->ioctl(tty, cmd, arg); - else - retval = -ENOIOCTLCMD; } return retval; diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 7573ec8a084..9910aa2edf4 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -560,10 +560,19 @@ static int treo_attach(struct usb_serial *serial) */ #define COPY_PORT(dest, src) \ do { \ + int i; \ + \ + for (i = 0; i < ARRAY_SIZE(src->read_urbs); ++i) { \ + dest->read_urbs[i] = src->read_urbs[i]; \ + dest->read_urbs[i]->context = dest; \ + dest->bulk_in_buffers[i] = src->bulk_in_buffers[i]; \ + } \ dest->read_urb = src->read_urb; \ dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\ dest->bulk_in_buffer = src->bulk_in_buffer; \ + dest->bulk_in_size = src->bulk_in_size; \ dest->interrupt_in_urb = src->interrupt_in_urb; \ + dest->interrupt_in_urb->context = dest; \ dest->interrupt_in_endpointAddress = \ src->interrupt_in_endpointAddress;\ dest->interrupt_in_buffer = src->interrupt_in_buffer; \ diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index b9fca3586d7..347caad47a1 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -649,7 +649,7 @@ static void firm_setup_port(struct tty_struct *tty) struct whiteheat_port_settings port_settings; unsigned int cflag = tty->termios.c_cflag; - port_settings.port = port->number + 1; + port_settings.port = port->number - port->serial->minor + 1; /* get the byte size */ switch (cflag & CSIZE) { diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c index 39ee7373b4e..fca4c752a4e 100644 --- a/drivers/usb/serial/zte_ev.c +++ b/drivers/usb/serial/zte_ev.c @@ -41,9 +41,6 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, int len; unsigned char *buf; - if (port->number != 0) - return -ENODEV; - buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL); if (!buf) return -ENOMEM; @@ -53,7 +50,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0001, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 2st cmd and recieve data */ @@ -65,7 +62,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 3 cmd */ @@ -84,7 +81,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 4 cmd */ @@ -95,7 +92,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 5 cmd */ @@ -107,7 +104,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 6 cmd */ @@ -126,7 +123,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); kfree(buf); @@ -166,9 +163,6 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) int len; unsigned char *buf; - if (port->number != 0) - return; - buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL); if (!buf) return; @@ -178,7 +172,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0002, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 2st ctl cmd(CTL 21 22 03 00 00 00 00 00 ) */ @@ -186,7 +180,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 3st cmd and recieve data */ @@ -198,7 +192,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 4 cmd */ @@ -217,7 +211,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 5 cmd */ @@ -228,7 +222,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 6 cmd */ @@ -240,7 +234,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 7 cmd */ @@ -259,7 +253,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 8 cmd */ @@ -270,7 +264,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); kfree(buf); @@ -279,11 +273,29 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) } static const struct usb_device_id id_table[] = { - { USB_DEVICE(0x19d2, 0xffff) }, /* AC8700 */ - { USB_DEVICE(0x19d2, 0xfffe) }, - { USB_DEVICE(0x19d2, 0xfffd) }, /* MG880 */ + /* AC8710, AC8710T */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffff, 0xff, 0xff, 0xff) }, + /* AC8700 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfffe, 0xff, 0xff, 0xff) }, + /* MG880 */ + { USB_DEVICE(0x19d2, 0xfffd) }, + { USB_DEVICE(0x19d2, 0xfffc) }, + { USB_DEVICE(0x19d2, 0xfffb) }, + /* AC2726, AC8710_V3 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfff1, 0xff, 0xff, 0xff) }, + { USB_DEVICE(0x19d2, 0xfff6) }, + { USB_DEVICE(0x19d2, 0xfff7) }, + { USB_DEVICE(0x19d2, 0xfff8) }, + { USB_DEVICE(0x19d2, 0xfff9) }, + { USB_DEVICE(0x19d2, 0xffee) }, + /* AC2716, MC2716 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffed, 0xff, 0xff, 0xff) }, + /* AD3812 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffeb, 0xff, 0xff, 0xff) }, + { USB_DEVICE(0x19d2, 0xffec) }, { USB_DEVICE(0x05C6, 0x3197) }, { USB_DEVICE(0x05C6, 0x6000) }, + { USB_DEVICE(0x05C6, 0x9008) }, { }, }; MODULE_DEVICE_TABLE(usb, id_table); |