aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ata/ata_piix.c14
-rw-r--r--drivers/ata/libata-core.c6
-rw-r--r--drivers/ata/libata-scsi.c8
-rw-r--r--drivers/base/regmap/regmap.c3
-rw-r--r--drivers/block/loop.c21
-rw-r--r--drivers/block/mtip32xx/mtip32xx.c327
-rw-r--r--drivers/block/mtip32xx/mtip32xx.h18
-rw-r--r--drivers/cpufreq/intel_pstate.c1
-rw-r--r--drivers/crypto/ux500/cryp/cryp_core.c2
-rw-r--r--drivers/dma/omap-dma.c20
-rw-r--r--drivers/dma/pl330.c38
-rw-r--r--drivers/gpio/gpio-pca953x.c2
-rw-r--r--drivers/gpu/drm/mgag200/mgag200_mode.c13
-rw-r--r--drivers/gpu/drm/nouveau/nv50_display.c2
-rw-r--r--drivers/hwspinlock/hwspinlock_core.c2
-rw-r--r--drivers/misc/vmw_vmci/Kconfig2
-rw-r--r--drivers/net/bonding/bond_main.c11
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c18
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c3
-rw-r--r--drivers/net/ethernet/intel/e100.c36
-rw-r--r--drivers/net/ethernet/marvell/mvneta.c9
-rw-r--r--drivers/net/hyperv/netvsc.c17
-rw-r--r--drivers/net/hyperv/netvsc_drv.c2
-rw-r--r--drivers/net/hyperv/rndis_filter.c14
-rw-r--r--drivers/net/wireless/ath/ath9k/main.c4
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c6
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c46
-rw-r--r--drivers/net/wireless/mwifiex/scan.c11
-rw-r--r--drivers/net/wireless/rt2x00/Kconfig7
-rw-r--r--drivers/net/wireless/rt2x00/Makefile1
-rw-r--r--drivers/net/wireless/rt2x00/rt2400pci.c1
-rw-r--r--drivers/net/wireless/rt2x00/rt2500pci.c1
-rw-r--r--drivers/net/wireless/rt2x00/rt2800pci.c1
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00mmio.c216
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00mmio.h119
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00pci.c176
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00pci.h88
-rw-r--r--drivers/net/wireless/rt2x00/rt61pci.c1
-rw-r--r--drivers/remoteproc/Kconfig2
-rw-r--r--drivers/remoteproc/remoteproc_core.c6
-rw-r--r--drivers/remoteproc/ste_modem_rproc.c7
-rw-r--r--drivers/s390/net/qeth_core.h3
-rw-r--r--drivers/s390/net/qeth_core_main.c19
-rw-r--r--drivers/s390/net/qeth_l2_main.c2
-rw-r--r--drivers/s390/net/qeth_l3_main.c2
-rw-r--r--drivers/tty/mxser.c8
-rw-r--r--drivers/tty/serial/8250/8250_pnp.c12
-rw-r--r--drivers/tty/serial/omap-serial.c11
-rw-r--r--drivers/vfio/pci/vfio_pci.c3
-rw-r--r--drivers/xen/events.c19
50 files changed, 847 insertions, 514 deletions
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index ffdd32d2260..2f48123d74c 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -150,6 +150,7 @@ enum piix_controller_ids {
tolapai_sata,
piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */
ich8_sata_snb,
+ ich8_2port_sata_snb,
};
struct piix_map_db {
@@ -304,7 +305,7 @@ static const struct pci_device_id piix_pci_tbl[] = {
/* SATA Controller IDE (Lynx Point) */
{ 0x8086, 0x8c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
/* SATA Controller IDE (Lynx Point) */
- { 0x8086, 0x8c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ { 0x8086, 0x8c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_snb },
/* SATA Controller IDE (Lynx Point) */
{ 0x8086, 0x8c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (Lynx Point-LP) */
@@ -439,6 +440,7 @@ static const struct piix_map_db *piix_map_db_table[] = {
[ich8m_apple_sata] = &ich8m_apple_map_db,
[tolapai_sata] = &tolapai_map_db,
[ich8_sata_snb] = &ich8_map_db,
+ [ich8_2port_sata_snb] = &ich8_2port_map_db,
};
static struct pci_bits piix_enable_bits[] = {
@@ -1242,6 +1244,16 @@ static struct ata_port_info piix_port_info[] = {
.udma_mask = ATA_UDMA6,
.port_ops = &piix_sata_ops,
},
+
+ [ich8_2port_sata_snb] =
+ {
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR
+ | PIIX_FLAG_PIO16,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &piix_sata_ops,
+ },
};
#define AHCI_PCI_BAR 5
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 497adea1f0d..63c743baf92 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2329,7 +2329,7 @@ int ata_dev_configure(struct ata_device *dev)
* from SATA Settings page of Identify Device Data Log.
*/
if (ata_id_has_devslp(dev->id)) {
- u8 sata_setting[ATA_SECT_SIZE];
+ u8 *sata_setting = ap->sector_buf;
int i, j;
dev->flags |= ATA_DFLAG_DEVSLP;
@@ -2439,6 +2439,9 @@ int ata_dev_configure(struct ata_device *dev)
dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
dev->max_sectors);
+ if (dev->horkage & ATA_HORKAGE_MAX_SEC_LBA48)
+ dev->max_sectors = ATA_MAX_SECTORS_LBA48;
+
if (ap->ops->dev_config)
ap->ops->dev_config(dev);
@@ -4100,6 +4103,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
/* Weird ATAPI devices */
{ "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 },
{ "QUANTUM DAT DAT72-000", NULL, ATA_HORKAGE_ATAPI_MOD16_DMA },
+ { "Slimtype DVD A DS8A8SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 },
/* Devices we expect to fail diagnostics */
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 318b4135818..ff44787e5a4 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -532,8 +532,8 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
struct scsi_sense_hdr sshdr;
scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE,
&sshdr);
- if (sshdr.sense_key == 0 &&
- sshdr.asc == 0 && sshdr.ascq == 0)
+ if (sshdr.sense_key == RECOVERED_ERROR &&
+ sshdr.asc == 0 && sshdr.ascq == 0x1d)
cmd_result &= ~SAM_STAT_CHECK_CONDITION;
}
@@ -618,8 +618,8 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
struct scsi_sense_hdr sshdr;
scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE,
&sshdr);
- if (sshdr.sense_key == 0 &&
- sshdr.asc == 0 && sshdr.ascq == 0)
+ if (sshdr.sense_key == RECOVERED_ERROR &&
+ sshdr.asc == 0 && sshdr.ascq == 0x1d)
cmd_result &= ~SAM_STAT_CHECK_CONDITION;
}
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index d34adef1e63..58cfb323242 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -943,7 +943,8 @@ static int _regmap_raw_write(struct regmap *map, unsigned int reg,
unsigned int ival;
int val_bytes = map->format.val_bytes;
for (i = 0; i < val_len / val_bytes; i++) {
- ival = map->format.parse_val(val + (i * val_bytes));
+ memcpy(map->work_buf, val + (i * val_bytes), val_bytes);
+ ival = map->format.parse_val(map->work_buf);
ret = regcache_write(map, reg + (i * map->reg_stride),
ival);
if (ret) {
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 2c127f9c3f3..dfe758382ea 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -1051,29 +1051,12 @@ static int loop_clr_fd(struct loop_device *lo)
lo->lo_state = Lo_unbound;
/* This is safe: open() is still holding a reference. */
module_put(THIS_MODULE);
+ if (lo->lo_flags & LO_FLAGS_PARTSCAN && bdev)
+ ioctl_by_bdev(bdev, BLKRRPART, 0);
lo->lo_flags = 0;
if (!part_shift)
lo->lo_disk->flags |= GENHD_FL_NO_PART_SCAN;
mutex_unlock(&lo->lo_ctl_mutex);
-
- /*
- * Remove all partitions, since BLKRRPART won't remove user
- * added partitions when max_part=0
- */
- if (bdev) {
- struct disk_part_iter piter;
- struct hd_struct *part;
-
- mutex_lock_nested(&bdev->bd_mutex, 1);
- invalidate_partition(bdev->bd_disk, 0);
- disk_part_iter_init(&piter, bdev->bd_disk,
- DISK_PITER_INCL_EMPTY);
- while ((part = disk_part_iter_next(&piter)))
- delete_partition(bdev->bd_disk, part->partno);
- disk_part_iter_exit(&piter);
- mutex_unlock(&bdev->bd_mutex);
- }
-
/*
* Need not hold lo_ctl_mutex to fput backing file.
* Calling fput holding lo_ctl_mutex triggers a circular
diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index 92250af84e7..32c678028e5 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -81,12 +81,17 @@
/* Device instance number, incremented each time a device is probed. */
static int instance;
+struct list_head online_list;
+struct list_head removing_list;
+spinlock_t dev_lock;
+
/*
* Global variable used to hold the major block device number
* allocated in mtip_init().
*/
static int mtip_major;
static struct dentry *dfs_parent;
+static struct dentry *dfs_device_status;
static u32 cpu_use[NR_CPUS];
@@ -243,40 +248,31 @@ static inline void release_slot(struct mtip_port *port, int tag)
/*
* Reset the HBA (without sleeping)
*
- * Just like hba_reset, except does not call sleep, so can be
- * run from interrupt/tasklet context.
- *
* @dd Pointer to the driver data structure.
*
* return value
* 0 The reset was successful.
* -1 The HBA Reset bit did not clear.
*/
-static int hba_reset_nosleep(struct driver_data *dd)
+static int mtip_hba_reset(struct driver_data *dd)
{
unsigned long timeout;
- /* Chip quirk: quiesce any chip function */
- mdelay(10);
-
/* Set the reset bit */
writel(HOST_RESET, dd->mmio + HOST_CTL);
/* Flush */
readl(dd->mmio + HOST_CTL);
- /*
- * Wait 10ms then spin for up to 1 second
- * waiting for reset acknowledgement
- */
- timeout = jiffies + msecs_to_jiffies(1000);
- mdelay(10);
- while ((readl(dd->mmio + HOST_CTL) & HOST_RESET)
- && time_before(jiffies, timeout))
- mdelay(1);
+ /* Spin for up to 2 seconds, waiting for reset acknowledgement */
+ timeout = jiffies + msecs_to_jiffies(2000);
+ do {
+ mdelay(10);
+ if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))
+ return -1;
- if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))
- return -1;
+ } while ((readl(dd->mmio + HOST_CTL) & HOST_RESET)
+ && time_before(jiffies, timeout));
if (readl(dd->mmio + HOST_CTL) & HOST_RESET)
return -1;
@@ -481,7 +477,7 @@ static void mtip_restart_port(struct mtip_port *port)
dev_warn(&port->dd->pdev->dev,
"PxCMD.CR not clear, escalating reset\n");
- if (hba_reset_nosleep(port->dd))
+ if (mtip_hba_reset(port->dd))
dev_err(&port->dd->pdev->dev,
"HBA reset escalation failed.\n");
@@ -527,6 +523,26 @@ static void mtip_restart_port(struct mtip_port *port)
}
+static int mtip_device_reset(struct driver_data *dd)
+{
+ int rv = 0;
+
+ if (mtip_check_surprise_removal(dd->pdev))
+ return 0;
+
+ if (mtip_hba_reset(dd) < 0)
+ rv = -EFAULT;
+
+ mdelay(1);
+ mtip_init_port(dd->port);
+ mtip_start_port(dd->port);
+
+ /* Enable interrupts on the HBA. */
+ writel(readl(dd->mmio + HOST_CTL) | HOST_IRQ_EN,
+ dd->mmio + HOST_CTL);
+ return rv;
+}
+
/*
* Helper function for tag logging
*/
@@ -632,7 +648,7 @@ static void mtip_timeout_function(unsigned long int data)
if (cmdto_cnt) {
print_tags(port->dd, "timed out", tagaccum, cmdto_cnt);
if (!test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags)) {
- mtip_restart_port(port);
+ mtip_device_reset(port->dd);
wake_up_interruptible(&port->svc_wait);
}
clear_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags);
@@ -1283,11 +1299,11 @@ static int mtip_exec_internal_command(struct mtip_port *port,
int rv = 0, ready2go = 1;
struct mtip_cmd *int_cmd = &port->commands[MTIP_TAG_INTERNAL];
unsigned long to;
+ struct driver_data *dd = port->dd;
/* Make sure the buffer is 8 byte aligned. This is asic specific. */
if (buffer & 0x00000007) {
- dev_err(&port->dd->pdev->dev,
- "SG buffer is not 8 byte aligned\n");
+ dev_err(&dd->pdev->dev, "SG buffer is not 8 byte aligned\n");
return -EFAULT;
}
@@ -1300,23 +1316,21 @@ static int mtip_exec_internal_command(struct mtip_port *port,
mdelay(100);
} while (time_before(jiffies, to));
if (!ready2go) {
- dev_warn(&port->dd->pdev->dev,
+ dev_warn(&dd->pdev->dev,
"Internal cmd active. new cmd [%02X]\n", fis->command);
return -EBUSY;
}
set_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
port->ic_pause_timer = 0;
- if (fis->command == ATA_CMD_SEC_ERASE_UNIT)
- clear_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags);
- else if (fis->command == ATA_CMD_DOWNLOAD_MICRO)
- clear_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags);
+ clear_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags);
+ clear_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags);
if (atomic == GFP_KERNEL) {
if (fis->command != ATA_CMD_STANDBYNOW1) {
/* wait for io to complete if non atomic */
if (mtip_quiesce_io(port, 5000) < 0) {
- dev_warn(&port->dd->pdev->dev,
+ dev_warn(&dd->pdev->dev,
"Failed to quiesce IO\n");
release_slot(port, MTIP_TAG_INTERNAL);
clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
@@ -1361,58 +1375,84 @@ static int mtip_exec_internal_command(struct mtip_port *port,
/* Issue the command to the hardware */
mtip_issue_non_ncq_command(port, MTIP_TAG_INTERNAL);
- /* Poll if atomic, wait_for_completion otherwise */
if (atomic == GFP_KERNEL) {
/* Wait for the command to complete or timeout. */
- if (wait_for_completion_timeout(
+ if (wait_for_completion_interruptible_timeout(
&wait,
- msecs_to_jiffies(timeout)) == 0) {
- dev_err(&port->dd->pdev->dev,
- "Internal command did not complete [%d] "
- "within timeout of %lu ms\n",
- atomic, timeout);
- if (mtip_check_surprise_removal(port->dd->pdev) ||
+ msecs_to_jiffies(timeout)) <= 0) {
+ if (rv == -ERESTARTSYS) { /* interrupted */
+ dev_err(&dd->pdev->dev,
+ "Internal command [%02X] was interrupted after %lu ms\n",
+ fis->command, timeout);
+ rv = -EINTR;
+ goto exec_ic_exit;
+ } else if (rv == 0) /* timeout */
+ dev_err(&dd->pdev->dev,
+ "Internal command did not complete [%02X] within timeout of %lu ms\n",
+ fis->command, timeout);
+ else
+ dev_err(&dd->pdev->dev,
+ "Internal command [%02X] wait returned code [%d] after %lu ms - unhandled\n",
+ fis->command, rv, timeout);
+
+ if (mtip_check_surprise_removal(dd->pdev) ||
test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
- &port->dd->dd_flag)) {
+ &dd->dd_flag)) {
+ dev_err(&dd->pdev->dev,
+ "Internal command [%02X] wait returned due to SR\n",
+ fis->command);
rv = -ENXIO;
goto exec_ic_exit;
}
+ mtip_device_reset(dd); /* recover from timeout issue */
rv = -EAGAIN;
+ goto exec_ic_exit;
}
} else {
+ u32 hba_stat, port_stat;
+
/* Spin for <timeout> checking if command still outstanding */
timeout = jiffies + msecs_to_jiffies(timeout);
while ((readl(port->cmd_issue[MTIP_TAG_INTERNAL])
& (1 << MTIP_TAG_INTERNAL))
&& time_before(jiffies, timeout)) {
- if (mtip_check_surprise_removal(port->dd->pdev)) {
+ if (mtip_check_surprise_removal(dd->pdev)) {
rv = -ENXIO;
goto exec_ic_exit;
}
if ((fis->command != ATA_CMD_STANDBYNOW1) &&
test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
- &port->dd->dd_flag)) {
+ &dd->dd_flag)) {
rv = -ENXIO;
goto exec_ic_exit;
}
- if (readl(port->mmio + PORT_IRQ_STAT) & PORT_IRQ_ERR) {
- atomic_inc(&int_cmd->active); /* error */
- break;
+ port_stat = readl(port->mmio + PORT_IRQ_STAT);
+ if (!port_stat)
+ continue;
+
+ if (port_stat & PORT_IRQ_ERR) {
+ dev_err(&dd->pdev->dev,
+ "Internal command [%02X] failed\n",
+ fis->command);
+ mtip_device_reset(dd);
+ rv = -EIO;
+ goto exec_ic_exit;
+ } else {
+ writel(port_stat, port->mmio + PORT_IRQ_STAT);
+ hba_stat = readl(dd->mmio + HOST_IRQ_STAT);
+ if (hba_stat)
+ writel(hba_stat,
+ dd->mmio + HOST_IRQ_STAT);
}
+ break;
}
}
- if (atomic_read(&int_cmd->active) > 1) {
- dev_err(&port->dd->pdev->dev,
- "Internal command [%02X] failed\n", fis->command);
- rv = -EIO;
- }
if (readl(port->cmd_issue[MTIP_TAG_INTERNAL])
& (1 << MTIP_TAG_INTERNAL)) {
rv = -ENXIO;
- if (!test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
- &port->dd->dd_flag)) {
- mtip_restart_port(port);
+ if (!test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) {
+ mtip_device_reset(dd);
rv = -EAGAIN;
}
}
@@ -1724,7 +1764,8 @@ static int mtip_get_smart_attr(struct mtip_port *port, unsigned int id,
* -EINVAL Invalid parameters passed in, trim not supported
* -EIO Error submitting trim request to hw
*/
-static int mtip_send_trim(struct driver_data *dd, unsigned int lba, unsigned int len)
+static int mtip_send_trim(struct driver_data *dd, unsigned int lba,
+ unsigned int len)
{
int i, rv = 0;
u64 tlba, tlen, sect_left;
@@ -1811,45 +1852,6 @@ static bool mtip_hw_get_capacity(struct driver_data *dd, sector_t *sectors)
}
/*
- * Reset the HBA.
- *
- * Resets the HBA by setting the HBA Reset bit in the Global
- * HBA Control register. After setting the HBA Reset bit the
- * function waits for 1 second before reading the HBA Reset
- * bit to make sure it has cleared. If HBA Reset is not clear
- * an error is returned. Cannot be used in non-blockable
- * context.
- *
- * @dd Pointer to the driver data structure.
- *
- * return value
- * 0 The reset was successful.
- * -1 The HBA Reset bit did not clear.
- */
-static int mtip_hba_reset(struct driver_data *dd)
-{
- mtip_deinit_port(dd->port);
-
- /* Set the reset bit */
- writel(HOST_RESET, dd->mmio + HOST_CTL);
-
- /* Flush */
- readl(dd->mmio + HOST_CTL);
-
- /* Wait for reset to clear */
- ssleep(1);
-
- /* Check the bit has cleared */
- if (readl(dd->mmio + HOST_CTL) & HOST_RESET) {
- dev_err(&dd->pdev->dev,
- "Reset bit did not clear.\n");
- return -1;
- }
-
- return 0;
-}
-
-/*
* Display the identify command data.
*
* @port Pointer to the port data structure.
@@ -2710,6 +2712,100 @@ static ssize_t mtip_hw_show_status(struct device *dev,
static DEVICE_ATTR(status, S_IRUGO, mtip_hw_show_status, NULL);
+/* debugsfs entries */
+
+static ssize_t show_device_status(struct device_driver *drv, char *buf)
+{
+ int size = 0;
+ struct driver_data *dd, *tmp;
+ unsigned long flags;
+ char id_buf[42];
+ u16 status = 0;
+
+ spin_lock_irqsave(&dev_lock, flags);
+ size += sprintf(&buf[size], "Devices Present:\n");
+ list_for_each_entry_safe(dd, tmp, &online_list, online_list) {
+ if (dd->pdev) {
+ if (dd->port &&
+ dd->port->identify &&
+ dd->port->identify_valid) {
+ strlcpy(id_buf,
+ (char *) (dd->port->identify + 10), 21);
+ status = *(dd->port->identify + 141);
+ } else {
+ memset(id_buf, 0, 42);
+ status = 0;
+ }
+
+ if (dd->port &&
+ test_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags)) {
+ size += sprintf(&buf[size],
+ " device %s %s (ftl rebuild %d %%)\n",
+ dev_name(&dd->pdev->dev),
+ id_buf,
+ status);
+ } else {
+ size += sprintf(&buf[size],
+ " device %s %s\n",
+ dev_name(&dd->pdev->dev),
+ id_buf);
+ }
+ }
+ }
+
+ size += sprintf(&buf[size], "Devices Being Removed:\n");
+ list_for_each_entry_safe(dd, tmp, &removing_list, remove_list) {
+ if (dd->pdev) {
+ if (dd->port &&
+ dd->port->identify &&
+ dd->port->identify_valid) {
+ strlcpy(id_buf,
+ (char *) (dd->port->identify+10), 21);
+ status = *(dd->port->identify + 141);
+ } else {
+ memset(id_buf, 0, 42);
+ status = 0;
+ }
+
+ if (dd->port &&
+ test_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags)) {
+ size += sprintf(&buf[size],
+ " device %s %s (ftl rebuild %d %%)\n",
+ dev_name(&dd->pdev->dev),
+ id_buf,
+ status);
+ } else {
+ size += sprintf(&buf[size],
+ " device %s %s\n",
+ dev_name(&dd->pdev->dev),
+ id_buf);
+ }
+ }
+ }
+ spin_unlock_irqrestore(&dev_lock, flags);
+
+ return size;
+}
+
+static ssize_t mtip_hw_read_device_status(struct file *f, char __user *ubuf,
+ size_t len, loff_t *offset)
+{
+ int size = *offset;
+ char buf[MTIP_DFS_MAX_BUF_SIZE];
+
+ if (!len || *offset)
+ return 0;
+
+ size += show_device_status(NULL, buf);
+
+ *offset = size <= len ? size : len;
+ size = copy_to_user(ubuf, buf, *offset);
+ if (size)
+ return -EFAULT;
+
+ return *offset;
+}
+
static ssize_t mtip_hw_read_registers(struct file *f, char __user *ubuf,
size_t len, loff_t *offset)
{
@@ -2804,6 +2900,13 @@ static ssize_t mtip_hw_read_flags(struct file *f, char __user *ubuf,
return *offset;
}
+static const struct file_operations mtip_device_status_fops = {
+ .owner = THIS_MODULE,
+ .open = simple_open,
+ .read = mtip_hw_read_device_status,
+ .llseek = no_llseek,
+};
+
static const struct file_operations mtip_regs_fops = {
.owner = THIS_MODULE,
.open = simple_open,
@@ -4161,6 +4264,7 @@ static int mtip_pci_probe(struct pci_dev *pdev,
const struct cpumask *node_mask;
int cpu, i = 0, j = 0;
int my_node = NUMA_NO_NODE;
+ unsigned long flags;
/* Allocate memory for this devices private data. */
my_node = pcibus_to_node(pdev->bus);
@@ -4218,6 +4322,9 @@ static int mtip_pci_probe(struct pci_dev *pdev,
dd->pdev = pdev;
dd->numa_node = my_node;
+ INIT_LIST_HEAD(&dd->online_list);
+ INIT_LIST_HEAD(&dd->remove_list);
+
memset(dd->workq_name, 0, 32);
snprintf(dd->workq_name, 31, "mtipq%d", dd->instance);
@@ -4305,6 +4412,14 @@ static int mtip_pci_probe(struct pci_dev *pdev,
instance++;
if (rv != MTIP_FTL_REBUILD_MAGIC)
set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag);
+ else
+ rv = 0; /* device in rebuild state, return 0 from probe */
+
+ /* Add to online list even if in ftl rebuild */
+ spin_lock_irqsave(&dev_lock, flags);
+ list_add(&dd->online_list, &online_list);
+ spin_unlock_irqrestore(&dev_lock, flags);
+
goto done;
block_initialize_err:
@@ -4338,9 +4453,15 @@ static void mtip_pci_remove(struct pci_dev *pdev)
{
struct driver_data *dd = pci_get_drvdata(pdev);
int counter = 0;
+ unsigned long flags;
set_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag);
+ spin_lock_irqsave(&dev_lock, flags);
+ list_del_init(&dd->online_list);
+ list_add(&dd->remove_list, &removing_list);
+ spin_unlock_irqrestore(&dev_lock, flags);
+
if (mtip_check_surprise_removal(pdev)) {
while (!test_bit(MTIP_DDF_CLEANUP_BIT, &dd->dd_flag)) {
counter++;
@@ -4366,6 +4487,10 @@ static void mtip_pci_remove(struct pci_dev *pdev)
pci_disable_msi(pdev);
+ spin_lock_irqsave(&dev_lock, flags);
+ list_del_init(&dd->remove_list);
+ spin_unlock_irqrestore(&dev_lock, flags);
+
kfree(dd);
pcim_iounmap_regions(pdev, 1 << MTIP_ABAR);
}
@@ -4513,6 +4638,11 @@ static int __init mtip_init(void)
pr_info(MTIP_DRV_NAME " Version " MTIP_DRV_VERSION "\n");
+ spin_lock_init(&dev_lock);
+
+ INIT_LIST_HEAD(&online_list);
+ INIT_LIST_HEAD(&removing_list);
+
/* Allocate a major block device number to use with this driver. */
error = register_blkdev(0, MTIP_DRV_NAME);
if (error <= 0) {
@@ -4522,11 +4652,18 @@ static int __init mtip_init(void)
}
mtip_major = error;
- if (!dfs_parent) {
- dfs_parent = debugfs_create_dir("rssd", NULL);
- if (IS_ERR_OR_NULL(dfs_parent)) {
- pr_warn("Error creating debugfs parent\n");
- dfs_parent = NULL;
+ dfs_parent = debugfs_create_dir("rssd", NULL);
+ if (IS_ERR_OR_NULL(dfs_parent)) {
+ pr_warn("Error creating debugfs parent\n");
+ dfs_parent = NULL;
+ }
+ if (dfs_parent) {
+ dfs_device_status = debugfs_create_file("device_status",
+ S_IRUGO, dfs_parent, NULL,
+ &mtip_device_status_fops);
+ if (IS_ERR_OR_NULL(dfs_device_status)) {
+ pr_err("Error creating device_status node\n");
+ dfs_device_status = NULL;
}
}
diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h
index 3bffff5f670..8e8334c9dd0 100644
--- a/drivers/block/mtip32xx/mtip32xx.h
+++ b/drivers/block/mtip32xx/mtip32xx.h
@@ -129,9 +129,9 @@ enum {
MTIP_PF_EH_ACTIVE_BIT = 1, /* error handling */
MTIP_PF_SE_ACTIVE_BIT = 2, /* secure erase */
MTIP_PF_DM_ACTIVE_BIT = 3, /* download microcde */
- MTIP_PF_PAUSE_IO = ((1 << MTIP_PF_IC_ACTIVE_BIT) | \
- (1 << MTIP_PF_EH_ACTIVE_BIT) | \
- (1 << MTIP_PF_SE_ACTIVE_BIT) | \
+ MTIP_PF_PAUSE_IO = ((1 << MTIP_PF_IC_ACTIVE_BIT) |
+ (1 << MTIP_PF_EH_ACTIVE_BIT) |
+ (1 << MTIP_PF_SE_ACTIVE_BIT) |
(1 << MTIP_PF_DM_ACTIVE_BIT)),
MTIP_PF_SVC_THD_ACTIVE_BIT = 4,
@@ -144,9 +144,9 @@ enum {
MTIP_DDF_REMOVE_PENDING_BIT = 1,
MTIP_DDF_OVER_TEMP_BIT = 2,
MTIP_DDF_WRITE_PROTECT_BIT = 3,
- MTIP_DDF_STOP_IO = ((1 << MTIP_DDF_REMOVE_PENDING_BIT) | \
- (1 << MTIP_DDF_SEC_LOCK_BIT) | \
- (1 << MTIP_DDF_OVER_TEMP_BIT) | \
+ MTIP_DDF_STOP_IO = ((1 << MTIP_DDF_REMOVE_PENDING_BIT) |
+ (1 << MTIP_DDF_SEC_LOCK_BIT) |
+ (1 << MTIP_DDF_OVER_TEMP_BIT) |
(1 << MTIP_DDF_WRITE_PROTECT_BIT)),
MTIP_DDF_CLEANUP_BIT = 5,
@@ -180,7 +180,7 @@ struct mtip_work {
#define MTIP_TRIM_TIMEOUT_MS 240000
#define MTIP_MAX_TRIM_ENTRIES 8
-#define MTIP_MAX_TRIM_ENTRY_LEN 0xfff8
+#define MTIP_MAX_TRIM_ENTRY_LEN 0xfff8
struct mtip_trim_entry {
u32 lba; /* starting lba of region */
@@ -501,6 +501,10 @@ struct driver_data {
atomic_t irq_workers_active;
int isr_binding;
+
+ struct list_head online_list; /* linkage for online list */
+
+ struct list_head remove_list; /* linkage for removing list */
};
#endif
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index ad72922919e..6133ef5cf67 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -502,7 +502,6 @@ static inline void intel_pstate_set_sample_time(struct cpudata *cpu)
sample_time = cpu->pstate_policy->sample_rate_ms;
delay = msecs_to_jiffies(sample_time);
- delay -= jiffies % delay;
mod_timer_pinned(&cpu->timer, jiffies + delay);
}
diff --git a/drivers/crypto/ux500/cryp/cryp_core.c b/drivers/crypto/ux500/cryp/cryp_core.c
index 8bc5fef07e7..22c9063e012 100644
--- a/drivers/crypto/ux500/cryp/cryp_core.c
+++ b/drivers/crypto/ux500/cryp/cryp_core.c
@@ -1750,7 +1750,7 @@ static struct platform_driver cryp_driver = {
.shutdown = ux500_cryp_shutdown,
.driver = {
.owner = THIS_MODULE,
- .name = "cryp1"
+ .name = "cryp1",
.pm = &ux500_cryp_pm,
}
};
diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
index c4b4fd2acc4..08b43bf3715 100644
--- a/drivers/dma/omap-dma.c
+++ b/drivers/dma/omap-dma.c
@@ -276,12 +276,20 @@ static void omap_dma_issue_pending(struct dma_chan *chan)
spin_lock_irqsave(&c->vc.lock, flags);
if (vchan_issue_pending(&c->vc) && !c->desc) {
- struct omap_dmadev *d = to_omap_dma_dev(chan->device);
- spin_lock(&d->lock);
- if (list_empty(&c->node))
- list_add_tail(&c->node, &d->pending);
- spin_unlock(&d->lock);
- tasklet_schedule(&d->task);
+ /*
+ * c->cyclic is used only by audio and in this case the DMA need
+ * to be started without delay.
+ */
+ if (!c->cyclic) {
+ struct omap_dmadev *d = to_omap_dma_dev(chan->device);
+ spin_lock(&d->lock);
+ if (list_empty(&c->node))
+ list_add_tail(&c->node, &d->pending);
+ spin_unlock(&d->lock);
+ tasklet_schedule(&d->task);
+ } else {
+ omap_dma_start_desc(c);
+ }
}
spin_unlock_irqrestore(&c->vc.lock, flags);
}
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 71815312275..5dbc5946c4c 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -2882,7 +2882,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
{
struct dma_pl330_platdata *pdat;
struct dma_pl330_dmac *pdmac;
- struct dma_pl330_chan *pch;
+ struct dma_pl330_chan *pch, *_p;
struct pl330_info *pi;
struct dma_device *pd;
struct resource *res;
@@ -2984,7 +2984,16 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
ret = dma_async_device_register(pd);
if (ret) {
dev_err(&adev->dev, "unable to register DMAC\n");
- goto probe_err2;
+ goto probe_err3;
+ }
+
+ if (adev->dev.of_node) {
+ ret = of_dma_controller_register(adev->dev.of_node,
+ of_dma_pl330_xlate, pdmac);
+ if (ret) {
+ dev_err(&adev->dev,
+ "unable to register DMA to the generic DT DMA helpers\n");
+ }
}
dev_info(&adev->dev,
@@ -2995,16 +3004,21 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
pi->pcfg.data_bus_width / 8, pi->pcfg.num_chan,
pi->pcfg.num_peri, pi->pcfg.num_events);
- ret = of_dma_controller_register(adev->dev.of_node,
- of_dma_pl330_xlate, pdmac);
- if (ret) {
- dev_err(&adev->dev,
- "unable to register DMA to the generic DT DMA helpers\n");
- goto probe_err2;
- }
-
return 0;
+probe_err3:
+ amba_set_drvdata(adev, NULL);
+ /* Idle the DMAC */
+ list_for_each_entry_safe(pch, _p, &pdmac->ddma.channels,
+ chan.device_node) {
+
+ /* Remove the channel */
+ list_del(&pch->chan.device_node);
+
+ /* Flush the channel */
+ pl330_control(&pch->chan, DMA_TERMINATE_ALL, 0);
+ pl330_free_chan_resources(&pch->chan);
+ }
probe_err2:
pl330_del(pi);
probe_err1:
@@ -3023,8 +3037,10 @@ static int pl330_remove(struct amba_device *adev)
if (!pdmac)
return 0;
- of_dma_controller_free(adev->dev.of_node);
+ if (adev->dev.of_node)
+ of_dma_controller_free(adev->dev.of_node);
+ dma_async_device_unregister(&pdmac->ddma);
amba_set_drvdata(adev, NULL);
/* Idle the DMAC */
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 24059462c87..9391cf16e99 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -575,7 +575,7 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
chip->gpio_chip.ngpio,
irq_base,
&pca953x_irq_simple_ops,
- NULL);
+ chip);
if (!chip->domain)
return -ENODEV;
diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c
index fe22bb780e1..78d8e919509 100644
--- a/drivers/gpu/drm/mgag200/mgag200_mode.c
+++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
@@ -751,8 +751,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
int i;
unsigned char misc = 0;
unsigned char ext_vga[6];
- unsigned char ext_vga_index24;
- unsigned char dac_index90 = 0;
u8 bppshift;
static unsigned char dacvalue[] = {
@@ -803,7 +801,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
option2 = 0x0000b000;
break;
case G200_ER:
- dac_index90 = 0;
break;
}
@@ -852,10 +849,8 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
WREG_DAC(i, dacvalue[i]);
}
- if (mdev->type == G200_ER) {
- WREG_DAC(0x90, dac_index90);
- }
-
+ if (mdev->type == G200_ER)
+ WREG_DAC(0x90, 0);
if (option)
pci_write_config_dword(dev->pdev, PCI_MGA_OPTION, option);
@@ -952,8 +947,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
if (mdev->type == G200_WB)
ext_vga[1] |= 0x88;
- ext_vga_index24 = 0x05;
-
/* Set pixel clocks */
misc = 0x2d;
WREG8(MGA_MISC_OUT, misc);
@@ -965,7 +958,7 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
}
if (mdev->type == G200_ER)
- WREG_ECRT(24, ext_vga_index24);
+ WREG_ECRT(0x24, 0x5);
if (mdev->type == G200_EV) {
WREG_ECRT(6, 0);
diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c
index 7f0e6c3f37d..1ddc03e51bf 100644
--- a/drivers/gpu/drm/nouveau/nv50_display.c
+++ b/drivers/gpu/drm/nouveau/nv50_display.c
@@ -479,7 +479,7 @@ nv50_display_flip_wait(void *data)
{
struct nv50_display_flip *flip = data;
if (nouveau_bo_rd32(flip->disp->sync, flip->chan->addr / 4) ==
- flip->chan->data);
+ flip->chan->data)
return true;
usleep_range(1, 2);
return false;
diff --git a/drivers/hwspinlock/hwspinlock_core.c b/drivers/hwspinlock/hwspinlock_core.c
index db713c0dfba..461a0d739d7 100644
--- a/drivers/hwspinlock/hwspinlock_core.c
+++ b/drivers/hwspinlock/hwspinlock_core.c
@@ -416,6 +416,8 @@ static int __hwspin_lock_request(struct hwspinlock *hwlock)
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
dev_err(dev, "%s: can't power on device\n", __func__);
+ pm_runtime_put_noidle(dev);
+ module_put(dev->driver->owner);
return ret;
}
diff --git a/drivers/misc/vmw_vmci/Kconfig b/drivers/misc/vmw_vmci/Kconfig
index 39c2ecadb27..ea98f7e9ccd 100644
--- a/drivers/misc/vmw_vmci/Kconfig
+++ b/drivers/misc/vmw_vmci/Kconfig
@@ -4,7 +4,7 @@
config VMWARE_VMCI
tristate "VMware VMCI Driver"
- depends on X86 && PCI
+ depends on X86 && PCI && NET
help
This is VMware's Virtual Machine Communication Interface. It enables
high-speed communication between host and guest in a virtual
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 171b10f167a..07401a3e256 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -4846,9 +4846,18 @@ static int __net_init bond_net_init(struct net *net)
static void __net_exit bond_net_exit(struct net *net)
{
struct bond_net *bn = net_generic(net, bond_net_id);
+ struct bonding *bond, *tmp_bond;
+ LIST_HEAD(list);
bond_destroy_sysfs(bn);
bond_destroy_proc_dir(bn);
+
+ /* Kill off any bonds created after unregistering bond rtnl ops */
+ rtnl_lock();
+ list_for_each_entry_safe(bond, tmp_bond, &bn->dev_list, bond_list)
+ unregister_netdevice_queue(bond->dev, &list);
+ unregister_netdevice_many(&list);
+ rtnl_unlock();
}
static struct pernet_operations bond_net_ops = {
@@ -4902,8 +4911,8 @@ static void __exit bonding_exit(void)
bond_destroy_debugfs();
- unregister_pernet_subsys(&bond_net_ops);
rtnl_link_unregister(&bond_link_ops);
+ unregister_pernet_subsys(&bond_net_ops);
#ifdef CONFIG_NET_POLL_CONTROLLER
/*
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 77ebae0ac64..0283f343b0d 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -13437,13 +13437,7 @@ static void bnx2x_check_kr2_wa(struct link_params *params,
{
struct bnx2x *bp = params->bp;
u16 base_page, next_page, not_kr2_device, lane;
- int sigdet = bnx2x_warpcore_get_sigdet(phy, params);
-
- if (!sigdet) {
- if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE))
- bnx2x_kr2_recovery(params, vars, phy);
- return;
- }
+ int sigdet;
/* Once KR2 was disabled, wait 5 seconds before checking KR2 recovery
* since some switches tend to reinit the AN process and clear the
@@ -13454,6 +13448,16 @@ static void bnx2x_check_kr2_wa(struct link_params *params,
vars->check_kr2_recovery_cnt--;
return;
}
+
+ sigdet = bnx2x_warpcore_get_sigdet(phy, params);
+ if (!sigdet) {
+ if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) {
+ bnx2x_kr2_recovery(params, vars, phy);
+ DP(NETIF_MSG_LINK, "No sigdet\n");
+ }
+ return;
+ }
+
lane = bnx2x_get_warpcore_lane(phy, params);
CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
MDIO_AER_BLOCK_AER_REG, lane);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index e81a747ea8c..8e58da909f5 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -4947,7 +4947,7 @@ static void bnx2x_after_function_update(struct bnx2x *bp)
q);
}
- if (!NO_FCOE(bp)) {
+ if (!NO_FCOE(bp) && CNIC_ENABLED(bp)) {
fp = &bp->fp[FCOE_IDX(bp)];
queue_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj;
@@ -13354,6 +13354,7 @@ static int bnx2x_unregister_cnic(struct net_device *dev)
RCU_INIT_POINTER(bp->cnic_ops, NULL);
mutex_unlock(&bp->cnic_mutex);
synchronize_rcu();
+ bp->cnic_enabled = false;
kfree(bp->cnic_kwq);
bp->cnic_kwq = NULL;
diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index ec800b093e7..d2bea3f07c7 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -870,7 +870,7 @@ err_unlock:
}
static int e100_exec_cb(struct nic *nic, struct sk_buff *skb,
- void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *))
+ int (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *))
{
struct cb *cb;
unsigned long flags;
@@ -888,10 +888,13 @@ static int e100_exec_cb(struct nic *nic, struct sk_buff *skb,
nic->cbs_avail--;
cb->skb = skb;
+ err = cb_prepare(nic, cb, skb);
+ if (err)
+ goto err_unlock;
+
if (unlikely(!nic->cbs_avail))
err = -ENOSPC;
- cb_prepare(nic, cb, skb);
/* Order is important otherwise we'll be in a race with h/w:
* set S-bit in current first, then clear S-bit in previous. */
@@ -1091,7 +1094,7 @@ static void e100_get_defaults(struct nic *nic)
nic->mii.mdio_write = mdio_write;
}
-static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+static int e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
{
struct config *config = &cb->u.config;
u8 *c = (u8 *)config;
@@ -1181,6 +1184,7 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
"[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
+ return 0;
}
/*************************************************************************
@@ -1331,7 +1335,7 @@ static const struct firmware *e100_request_firmware(struct nic *nic)
return fw;
}
-static void e100_setup_ucode(struct nic *nic, struct cb *cb,
+static int e100_setup_ucode(struct nic *nic, struct cb *cb,
struct sk_buff *skb)
{
const struct firmware *fw = (void *)skb;
@@ -1358,6 +1362,7 @@ static void e100_setup_ucode(struct nic *nic, struct cb *cb,
cb->u.ucode[min_size] |= cpu_to_le32((BUNDLESMALL) ? 0xFFFF : 0xFF80);
cb->command = cpu_to_le16(cb_ucode | cb_el);
+ return 0;
}
static inline int e100_load_ucode_wait(struct nic *nic)
@@ -1400,18 +1405,20 @@ static inline int e100_load_ucode_wait(struct nic *nic)
return err;
}
-static void e100_setup_iaaddr(struct nic *nic, struct cb *cb,
+static int e100_setup_iaaddr(struct nic *nic, struct cb *cb,
struct sk_buff *skb)
{
cb->command = cpu_to_le16(cb_iaaddr);
memcpy(cb->u.iaaddr, nic->netdev->dev_addr, ETH_ALEN);
+ return 0;
}
-static void e100_dump(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+static int e100_dump(struct nic *nic, struct cb *cb, struct sk_buff *skb)
{
cb->command = cpu_to_le16(cb_dump);
cb->u.dump_buffer_addr = cpu_to_le32(nic->dma_addr +
offsetof(struct mem, dump_buf));
+ return 0;
}
static int e100_phy_check_without_mii(struct nic *nic)
@@ -1581,7 +1588,7 @@ static int e100_hw_init(struct nic *nic)
return 0;
}
-static void e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+static int e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb)
{
struct net_device *netdev = nic->netdev;
struct netdev_hw_addr *ha;
@@ -1596,6 +1603,7 @@ static void e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb)
memcpy(&cb->u.multi.addr[i++ * ETH_ALEN], &ha->addr,
ETH_ALEN);
}
+ return 0;
}
static void e100_set_multicast_list(struct net_device *netdev)
@@ -1756,11 +1764,18 @@ static void e100_watchdog(unsigned long data)
round_jiffies(jiffies + E100_WATCHDOG_PERIOD));
}
-static void e100_xmit_prepare(struct nic *nic, struct cb *cb,
+static int e100_xmit_prepare(struct nic *nic, struct cb *cb,
struct sk_buff *skb)
{
+ dma_addr_t dma_addr;
cb->command = nic->tx_command;
+ dma_addr = pci_map_single(nic->pdev,
+ skb->data, skb->len, PCI_DMA_TODEVICE);
+ /* If we can't map the skb, have the upper layer try later */
+ if (pci_dma_mapping_error(nic->pdev, dma_addr))
+ return -ENOMEM;
+
/*
* Use the last 4 bytes of the SKB payload packet as the CRC, used for
* testing, ie sending frames with bad CRC.
@@ -1777,11 +1792,10 @@ static void e100_xmit_prepare(struct nic *nic, struct cb *cb,
cb->u.tcb.tcb_byte_count = 0;
cb->u.tcb.threshold = nic->tx_threshold;
cb->u.tcb.tbd_count = 1;
- cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev,
- skb->data, skb->len, PCI_DMA_TODEVICE));
- /* check for mapping failure? */
+ cb->u.tcb.tbd.buf_addr = cpu_to_le32(dma_addr);
cb->u.tcb.tbd.size = cpu_to_le16(skb->len);
skb_tx_timestamp(skb);
+ return 0;
}
static netdev_tx_t e100_xmit_frame(struct sk_buff *skb,
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index cd345b8969b..1e628ce5720 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -2771,16 +2771,17 @@ static int mvneta_probe(struct platform_device *pdev)
netif_napi_add(dev, &pp->napi, mvneta_poll, pp->weight);
+ dev->features = NETIF_F_SG | NETIF_F_IP_CSUM;
+ dev->hw_features |= NETIF_F_SG | NETIF_F_IP_CSUM;
+ dev->vlan_features |= NETIF_F_SG | NETIF_F_IP_CSUM;
+ dev->priv_flags |= IFF_UNICAST_FLT;
+
err = register_netdev(dev);
if (err < 0) {
dev_err(&pdev->dev, "failed to register\n");
goto err_deinit;
}
- dev->features = NETIF_F_SG | NETIF_F_IP_CSUM;
- dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM;
- dev->priv_flags |= IFF_UNICAST_FLT;
-
netdev_info(dev, "mac: %pM\n", dev->dev_addr);
platform_set_drvdata(pdev, pp->dev);
diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c
index 1cd77483da5..f5f0f09e4cc 100644
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -470,8 +470,10 @@ static void netvsc_send_completion(struct hv_device *device,
packet->trans_id;
/* Notify the layer above us */
- nvsc_packet->completion.send.send_completion(
- nvsc_packet->completion.send.send_completion_ctx);
+ if (nvsc_packet)
+ nvsc_packet->completion.send.send_completion(
+ nvsc_packet->completion.send.
+ send_completion_ctx);
num_outstanding_sends =
atomic_dec_return(&net_device->num_outstanding_sends);
@@ -498,6 +500,7 @@ int netvsc_send(struct hv_device *device,
int ret = 0;
struct nvsp_message sendMessage;
struct net_device *ndev;
+ u64 req_id;
net_device = get_outbound_net_device(device);
if (!net_device)
@@ -518,20 +521,24 @@ int netvsc_send(struct hv_device *device,
0xFFFFFFFF;
sendMessage.msg.v1_msg.send_rndis_pkt.send_buf_section_size = 0;
+ if (packet->completion.send.send_completion)
+ req_id = (u64)packet;
+ else
+ req_id = 0;
+
if (packet->page_buf_cnt) {
ret = vmbus_sendpacket_pagebuffer(device->channel,
packet->page_buf,
packet->page_buf_cnt,
&sendMessage,
sizeof(struct nvsp_message),
- (unsigned long)packet);
+ req_id);
} else {
ret = vmbus_sendpacket(device->channel, &sendMessage,
sizeof(struct nvsp_message),
- (unsigned long)packet,
+ req_id,
VM_PKT_DATA_INBAND,
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
-
}
if (ret == 0) {
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 5f85205cd12..8341b62e552 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -241,13 +241,11 @@ void netvsc_linkstatus_callback(struct hv_device *device_obj,
if (status == 1) {
netif_carrier_on(net);
- netif_wake_queue(net);
ndev_ctx = netdev_priv(net);
schedule_delayed_work(&ndev_ctx->dwork, 0);
schedule_delayed_work(&ndev_ctx->dwork, msecs_to_jiffies(20));
} else {
netif_carrier_off(net);
- netif_tx_disable(net);
}
}
diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c
index 2b657d4d63a..0775f0aefd1 100644
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -61,9 +61,6 @@ struct rndis_request {
static void rndis_filter_send_completion(void *ctx);
-static void rndis_filter_send_request_completion(void *ctx);
-
-
static struct rndis_device *get_rndis_device(void)
{
@@ -241,10 +238,7 @@ static int rndis_filter_send_request(struct rndis_device *dev,
packet->page_buf[0].len;
}
- packet->completion.send.send_completion_ctx = req;/* packet; */
- packet->completion.send.send_completion =
- rndis_filter_send_request_completion;
- packet->completion.send.send_completion_tid = (unsigned long)dev;
+ packet->completion.send.send_completion = NULL;
ret = netvsc_send(dev->net_dev->dev, packet);
return ret;
@@ -999,9 +993,3 @@ static void rndis_filter_send_completion(void *ctx)
/* Pass it back to the original handler */
filter_pkt->completion(filter_pkt->completion_ctx);
}
-
-
-static void rndis_filter_send_request_completion(void *ctx)
-{
- /* Noop */
-}
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 6e66f9c6782..988372d218a 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -280,6 +280,10 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan)
if (r) {
ath_err(common,
"Unable to reset channel, reset status %d\n", r);
+
+ ath9k_hw_enable_interrupts(ah);
+ ath9k_queue_reset(sc, RESET_TYPE_BB_HANG);
+
goto out;
}
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 4469321c0eb..35fc68be158 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -3317,15 +3317,15 @@ static int _brcmf_sdbrcm_download_firmware(struct brcmf_sdio *bus)
goto err;
}
- /* External image takes precedence if specified */
if (brcmf_sdbrcm_download_code_file(bus)) {
brcmf_err("dongle image file download failed\n");
goto err;
}
- /* External nvram takes precedence if specified */
- if (brcmf_sdbrcm_download_nvram(bus))
+ if (brcmf_sdbrcm_download_nvram(bus)) {
brcmf_err("dongle nvram file download failed\n");
+ goto err;
+ }
/* Take arm out of reset */
if (brcmf_sdbrcm_download_state(bus, false)) {
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 2af9c0f0798..ec46ffff540 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -1891,8 +1891,10 @@ static s32
brcmf_add_keyext(struct wiphy *wiphy, struct net_device *ndev,
u8 key_idx, const u8 *mac_addr, struct key_params *params)
{
+ struct brcmf_if *ifp = netdev_priv(ndev);
struct brcmf_wsec_key key;
s32 err = 0;
+ u8 keybuf[8];
memset(&key, 0, sizeof(key));
key.index = (u32) key_idx;
@@ -1916,8 +1918,9 @@ brcmf_add_keyext(struct wiphy *wiphy, struct net_device *ndev,
brcmf_dbg(CONN, "Setting the key index %d\n", key.index);
memcpy(key.data, params->key, key.len);
- if (params->cipher == WLAN_CIPHER_SUITE_TKIP) {
- u8 keybuf[8];
+ if ((ifp->vif->mode != WL_MODE_AP) &&
+ (params->cipher == WLAN_CIPHER_SUITE_TKIP)) {
+ brcmf_dbg(CONN, "Swapping RX/TX MIC key\n");
memcpy(keybuf, &key.data[24], sizeof(keybuf));
memcpy(&key.data[24], &key.data[16], sizeof(keybuf));
memcpy(&key.data[16], keybuf, sizeof(keybuf));
@@ -2013,7 +2016,7 @@ brcmf_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
break;
case WLAN_CIPHER_SUITE_TKIP:
if (ifp->vif->mode != WL_MODE_AP) {
- brcmf_dbg(CONN, "Swapping key\n");
+ brcmf_dbg(CONN, "Swapping RX/TX MIC key\n");
memcpy(keybuf, &key.data[24], sizeof(keybuf));
memcpy(&key.data[24], &key.data[16], sizeof(keybuf));
memcpy(&key.data[16], keybuf, sizeof(keybuf));
@@ -2118,8 +2121,7 @@ brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev,
err = -EAGAIN;
goto done;
}
- switch (wsec & ~SES_OW_ENABLED) {
- case WEP_ENABLED:
+ if (wsec & WEP_ENABLED) {
sec = &profile->sec;
if (sec->cipher_pairwise & WLAN_CIPHER_SUITE_WEP40) {
params.cipher = WLAN_CIPHER_SUITE_WEP40;
@@ -2128,16 +2130,13 @@ brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev,
params.cipher = WLAN_CIPHER_SUITE_WEP104;
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP104\n");
}
- break;
- case TKIP_ENABLED:
+ } else if (wsec & TKIP_ENABLED) {
params.cipher = WLAN_CIPHER_SUITE_TKIP;
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_TKIP\n");
- break;
- case AES_ENABLED:
+ } else if (wsec & AES_ENABLED) {
params.cipher = WLAN_CIPHER_SUITE_AES_CMAC;
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_AES_CMAC\n");
- break;
- default:
+ } else {
brcmf_err("Invalid algo (0x%x)\n", wsec);
err = -EINVAL;
goto done;
@@ -3824,8 +3823,9 @@ exit:
static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev)
{
struct brcmf_if *ifp = netdev_priv(ndev);
- s32 err = -EPERM;
+ s32 err;
struct brcmf_fil_bss_enable_le bss_enable;
+ struct brcmf_join_params join_params;
brcmf_dbg(TRACE, "Enter\n");
@@ -3833,16 +3833,21 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev)
/* Due to most likely deauths outstanding we sleep */
/* first to make sure they get processed by fw. */
msleep(400);
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 0);
- if (err < 0) {
- brcmf_err("setting AP mode failed %d\n", err);
- goto exit;
- }
+
+ memset(&join_params, 0, sizeof(join_params));
+ err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID,
+ &join_params, sizeof(join_params));
+ if (err < 0)
+ brcmf_err("SET SSID error (%d)\n", err);
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 0);
- if (err < 0) {
+ if (err < 0)
brcmf_err("BRCMF_C_UP error %d\n", err);
- goto exit;
- }
+ err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 0);
+ if (err < 0)
+ brcmf_err("setting AP mode failed %d\n", err);
+ err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, 0);
+ if (err < 0)
+ brcmf_err("setting INFRA mode failed %d\n", err);
} else {
bss_enable.bsscfg_idx = cpu_to_le32(ifp->bssidx);
bss_enable.enable = cpu_to_le32(0);
@@ -3855,7 +3860,6 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev)
set_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state);
clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state);
-exit:
return err;
}
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index d215b4d3c51..e7f6deaf715 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -1393,8 +1393,10 @@ int mwifiex_scan_networks(struct mwifiex_private *priv,
queue_work(adapter->workqueue, &adapter->main_work);
/* Perform internal scan synchronously */
- if (!priv->scan_request)
+ if (!priv->scan_request) {
+ dev_dbg(adapter->dev, "wait internal scan\n");
mwifiex_wait_queue_complete(adapter, cmd_node);
+ }
} else {
spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
flags);
@@ -1793,7 +1795,12 @@ check_next_scan:
/* Need to indicate IOCTL complete */
if (adapter->curr_cmd->wait_q_enabled) {
adapter->cmd_wait_q.status = 0;
- mwifiex_complete_cmd(adapter, adapter->curr_cmd);
+ if (!priv->scan_request) {
+ dev_dbg(adapter->dev,
+ "complete internal scan\n");
+ mwifiex_complete_cmd(adapter,
+ adapter->curr_cmd);
+ }
}
if (priv->report_scan_result)
priv->report_scan_result = false;
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index 2bf4efa3318..76cd47eb901 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -20,6 +20,7 @@ if RT2X00
config RT2400PCI
tristate "Ralink rt2400 (PCI/PCMCIA) support"
depends on PCI
+ select RT2X00_LIB_MMIO
select RT2X00_LIB_PCI
select EEPROM_93CX6
---help---
@@ -31,6 +32,7 @@ config RT2400PCI
config RT2500PCI
tristate "Ralink rt2500 (PCI/PCMCIA) support"
depends on PCI
+ select RT2X00_LIB_MMIO
select RT2X00_LIB_PCI
select EEPROM_93CX6
---help---
@@ -43,6 +45,7 @@ config RT61PCI
tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support"
depends on PCI
select RT2X00_LIB_PCI
+ select RT2X00_LIB_MMIO
select RT2X00_LIB_FIRMWARE
select RT2X00_LIB_CRYPTO
select CRC_ITU_T
@@ -57,6 +60,7 @@ config RT2800PCI
tristate "Ralink rt27xx/rt28xx/rt30xx (PCI/PCIe/PCMCIA) support"
depends on PCI || SOC_RT288X || SOC_RT305X
select RT2800_LIB
+ select RT2X00_LIB_MMIO
select RT2X00_LIB_PCI if PCI
select RT2X00_LIB_SOC if SOC_RT288X || SOC_RT305X
select RT2X00_LIB_FIRMWARE
@@ -185,6 +189,9 @@ endif
config RT2800_LIB
tristate
+config RT2X00_LIB_MMIO
+ tristate
+
config RT2X00_LIB_PCI
tristate
select RT2X00_LIB
diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile
index 349d5b8284a..f069d8bc5b6 100644
--- a/drivers/net/wireless/rt2x00/Makefile
+++ b/drivers/net/wireless/rt2x00/Makefile
@@ -9,6 +9,7 @@ rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE) += rt2x00firmware.o
rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS) += rt2x00leds.o
obj-$(CONFIG_RT2X00_LIB) += rt2x00lib.o
+obj-$(CONFIG_RT2X00_LIB_MMIO) += rt2x00mmio.o
obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o
obj-$(CONFIG_RT2X00_LIB_SOC) += rt2x00soc.o
obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00usb.o
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 221beaaa83f..dcfb54e0c51 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -34,6 +34,7 @@
#include <linux/slab.h>
#include "rt2x00.h"
+#include "rt2x00mmio.h"
#include "rt2x00pci.h"
#include "rt2400pci.h"
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 39edc59e8d0..e1d2dc9ed28 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -34,6 +34,7 @@
#include <linux/slab.h>
#include "rt2x00.h"
+#include "rt2x00mmio.h"
#include "rt2x00pci.h"
#include "rt2500pci.h"
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index ded73da4de0..ba5a05625aa 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -41,6 +41,7 @@
#include <linux/eeprom_93cx6.h>
#include "rt2x00.h"
+#include "rt2x00mmio.h"
#include "rt2x00pci.h"
#include "rt2x00soc.h"
#include "rt2800lib.h"
diff --git a/drivers/net/wireless/rt2x00/rt2x00mmio.c b/drivers/net/wireless/rt2x00/rt2x00mmio.c
new file mode 100644
index 00000000000..d84a680ba0c
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00mmio.c
@@ -0,0 +1,216 @@
+/*
+ Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+ <http://rt2x00.serialmonkey.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the
+ Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ Module: rt2x00mmio
+ Abstract: rt2x00 generic mmio device routines.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "rt2x00.h"
+#include "rt2x00mmio.h"
+
+/*
+ * Register access.
+ */
+int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ const struct rt2x00_field32 field,
+ u32 *reg)
+{
+ unsigned int i;
+
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ return 0;
+
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+ rt2x00pci_register_read(rt2x00dev, offset, reg);
+ if (!rt2x00_get_field32(*reg, field))
+ return 1;
+ udelay(REGISTER_BUSY_DELAY);
+ }
+
+ printk_once(KERN_ERR "%s() Indirect register access failed: "
+ "offset=0x%.08x, value=0x%.08x\n", __func__, offset, *reg);
+ *reg = ~0;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rt2x00pci_regbusy_read);
+
+bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev)
+{
+ struct data_queue *queue = rt2x00dev->rx;
+ struct queue_entry *entry;
+ struct queue_entry_priv_pci *entry_priv;
+ struct skb_frame_desc *skbdesc;
+ int max_rx = 16;
+
+ while (--max_rx) {
+ entry = rt2x00queue_get_entry(queue, Q_INDEX);
+ entry_priv = entry->priv_data;
+
+ if (rt2x00dev->ops->lib->get_entry_state(entry))
+ break;
+
+ /*
+ * Fill in desc fields of the skb descriptor
+ */
+ skbdesc = get_skb_frame_desc(entry->skb);
+ skbdesc->desc = entry_priv->desc;
+ skbdesc->desc_len = entry->queue->desc_size;
+
+ /*
+ * DMA is already done, notify rt2x00lib that
+ * it finished successfully.
+ */
+ rt2x00lib_dmastart(entry);
+ rt2x00lib_dmadone(entry);
+
+ /*
+ * Send the frame to rt2x00lib for further processing.
+ */
+ rt2x00lib_rxdone(entry, GFP_ATOMIC);
+ }
+
+ return !max_rx;
+}
+EXPORT_SYMBOL_GPL(rt2x00pci_rxdone);
+
+void rt2x00pci_flush_queue(struct data_queue *queue, bool drop)
+{
+ unsigned int i;
+
+ for (i = 0; !rt2x00queue_empty(queue) && i < 10; i++)
+ msleep(10);
+}
+EXPORT_SYMBOL_GPL(rt2x00pci_flush_queue);
+
+/*
+ * Device initialization handlers.
+ */
+static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev,
+ struct data_queue *queue)
+{
+ struct queue_entry_priv_pci *entry_priv;
+ void *addr;
+ dma_addr_t dma;
+ unsigned int i;
+
+ /*
+ * Allocate DMA memory for descriptor and buffer.
+ */
+ addr = dma_alloc_coherent(rt2x00dev->dev,
+ queue->limit * queue->desc_size,
+ &dma, GFP_KERNEL);
+ if (!addr)
+ return -ENOMEM;
+
+ memset(addr, 0, queue->limit * queue->desc_size);
+
+ /*
+ * Initialize all queue entries to contain valid addresses.
+ */
+ for (i = 0; i < queue->limit; i++) {
+ entry_priv = queue->entries[i].priv_data;
+ entry_priv->desc = addr + i * queue->desc_size;
+ entry_priv->desc_dma = dma + i * queue->desc_size;
+ }
+
+ return 0;
+}
+
+static void rt2x00pci_free_queue_dma(struct rt2x00_dev *rt2x00dev,
+ struct data_queue *queue)
+{
+ struct queue_entry_priv_pci *entry_priv =
+ queue->entries[0].priv_data;
+
+ if (entry_priv->desc)
+ dma_free_coherent(rt2x00dev->dev,
+ queue->limit * queue->desc_size,
+ entry_priv->desc, entry_priv->desc_dma);
+ entry_priv->desc = NULL;
+}
+
+int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev)
+{
+ struct data_queue *queue;
+ int status;
+
+ /*
+ * Allocate DMA
+ */
+ queue_for_each(rt2x00dev, queue) {
+ status = rt2x00pci_alloc_queue_dma(rt2x00dev, queue);
+ if (status)
+ goto exit;
+ }
+
+ /*
+ * Register interrupt handler.
+ */
+ status = request_irq(rt2x00dev->irq,
+ rt2x00dev->ops->lib->irq_handler,
+ IRQF_SHARED, rt2x00dev->name, rt2x00dev);
+ if (status) {
+ ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n",
+ rt2x00dev->irq, status);
+ goto exit;
+ }
+
+ return 0;
+
+exit:
+ queue_for_each(rt2x00dev, queue)
+ rt2x00pci_free_queue_dma(rt2x00dev, queue);
+
+ return status;
+}
+EXPORT_SYMBOL_GPL(rt2x00pci_initialize);
+
+void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev)
+{
+ struct data_queue *queue;
+
+ /*
+ * Free irq line.
+ */
+ free_irq(rt2x00dev->irq, rt2x00dev);
+
+ /*
+ * Free DMA
+ */
+ queue_for_each(rt2x00dev, queue)
+ rt2x00pci_free_queue_dma(rt2x00dev, queue);
+}
+EXPORT_SYMBOL_GPL(rt2x00pci_uninitialize);
+
+/*
+ * rt2x00mmio module information.
+ */
+MODULE_AUTHOR(DRV_PROJECT);
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("rt2x00 mmio library");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/wireless/rt2x00/rt2x00mmio.h b/drivers/net/wireless/rt2x00/rt2x00mmio.h
new file mode 100644
index 00000000000..4ecaf60175b
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00mmio.h
@@ -0,0 +1,119 @@
+/*
+ Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+ <http://rt2x00.serialmonkey.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the
+ Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ Module: rt2x00mmio
+ Abstract: Data structures for the rt2x00mmio module.
+ */
+
+#ifndef RT2X00MMIO_H
+#define RT2X00MMIO_H
+
+#include <linux/io.h>
+
+/*
+ * Register access.
+ */
+static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ u32 *value)
+{
+ *value = readl(rt2x00dev->csr.base + offset);
+}
+
+static inline void rt2x00pci_register_multiread(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ void *value, const u32 length)
+{
+ memcpy_fromio(value, rt2x00dev->csr.base + offset, length);
+}
+
+static inline void rt2x00pci_register_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ u32 value)
+{
+ writel(value, rt2x00dev->csr.base + offset);
+}
+
+static inline void rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ const void *value,
+ const u32 length)
+{
+ __iowrite32_copy(rt2x00dev->csr.base + offset, value, length >> 2);
+}
+
+/**
+ * rt2x00pci_regbusy_read - Read from register with busy check
+ * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
+ * @offset: Register offset
+ * @field: Field to check if register is busy
+ * @reg: Pointer to where register contents should be stored
+ *
+ * This function will read the given register, and checks if the
+ * register is busy. If it is, it will sleep for a couple of
+ * microseconds before reading the register again. If the register
+ * is not read after a certain timeout, this function will return
+ * FALSE.
+ */
+int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ const struct rt2x00_field32 field,
+ u32 *reg);
+
+/**
+ * struct queue_entry_priv_pci: Per entry PCI specific information
+ *
+ * @desc: Pointer to device descriptor
+ * @desc_dma: DMA pointer to &desc.
+ * @data: Pointer to device's entry memory.
+ * @data_dma: DMA pointer to &data.
+ */
+struct queue_entry_priv_pci {
+ __le32 *desc;
+ dma_addr_t desc_dma;
+};
+
+/**
+ * rt2x00pci_rxdone - Handle RX done events
+ * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
+ *
+ * Returns true if there are still rx frames pending and false if all
+ * pending rx frames were processed.
+ */
+bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev);
+
+/**
+ * rt2x00pci_flush_queue - Flush data queue
+ * @queue: Data queue to stop
+ * @drop: True to drop all pending frames.
+ *
+ * This will wait for a maximum of 100ms, waiting for the queues
+ * to become empty.
+ */
+void rt2x00pci_flush_queue(struct data_queue *queue, bool drop);
+
+/*
+ * Device initialization handlers.
+ */
+int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev);
+void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev);
+
+#endif /* RT2X00MMIO_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index a0c8caef3b0..e87865e3311 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -33,182 +33,6 @@
#include "rt2x00pci.h"
/*
- * Register access.
- */
-int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
- const unsigned int offset,
- const struct rt2x00_field32 field,
- u32 *reg)
-{
- unsigned int i;
-
- if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
- return 0;
-
- for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
- rt2x00pci_register_read(rt2x00dev, offset, reg);
- if (!rt2x00_get_field32(*reg, field))
- return 1;
- udelay(REGISTER_BUSY_DELAY);
- }
-
- ERROR(rt2x00dev, "Indirect register access failed: "
- "offset=0x%.08x, value=0x%.08x\n", offset, *reg);
- *reg = ~0;
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(rt2x00pci_regbusy_read);
-
-bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev)
-{
- struct data_queue *queue = rt2x00dev->rx;
- struct queue_entry *entry;
- struct queue_entry_priv_pci *entry_priv;
- struct skb_frame_desc *skbdesc;
- int max_rx = 16;
-
- while (--max_rx) {
- entry = rt2x00queue_get_entry(queue, Q_INDEX);
- entry_priv = entry->priv_data;
-
- if (rt2x00dev->ops->lib->get_entry_state(entry))
- break;
-
- /*
- * Fill in desc fields of the skb descriptor
- */
- skbdesc = get_skb_frame_desc(entry->skb);
- skbdesc->desc = entry_priv->desc;
- skbdesc->desc_len = entry->queue->desc_size;
-
- /*
- * DMA is already done, notify rt2x00lib that
- * it finished successfully.
- */
- rt2x00lib_dmastart(entry);
- rt2x00lib_dmadone(entry);
-
- /*
- * Send the frame to rt2x00lib for further processing.
- */
- rt2x00lib_rxdone(entry, GFP_ATOMIC);
- }
-
- return !max_rx;
-}
-EXPORT_SYMBOL_GPL(rt2x00pci_rxdone);
-
-void rt2x00pci_flush_queue(struct data_queue *queue, bool drop)
-{
- unsigned int i;
-
- for (i = 0; !rt2x00queue_empty(queue) && i < 10; i++)
- msleep(10);
-}
-EXPORT_SYMBOL_GPL(rt2x00pci_flush_queue);
-
-/*
- * Device initialization handlers.
- */
-static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev,
- struct data_queue *queue)
-{
- struct queue_entry_priv_pci *entry_priv;
- void *addr;
- dma_addr_t dma;
- unsigned int i;
-
- /*
- * Allocate DMA memory for descriptor and buffer.
- */
- addr = dma_alloc_coherent(rt2x00dev->dev,
- queue->limit * queue->desc_size,
- &dma, GFP_KERNEL);
- if (!addr)
- return -ENOMEM;
-
- memset(addr, 0, queue->limit * queue->desc_size);
-
- /*
- * Initialize all queue entries to contain valid addresses.
- */
- for (i = 0; i < queue->limit; i++) {
- entry_priv = queue->entries[i].priv_data;
- entry_priv->desc = addr + i * queue->desc_size;
- entry_priv->desc_dma = dma + i * queue->desc_size;
- }
-
- return 0;
-}
-
-static void rt2x00pci_free_queue_dma(struct rt2x00_dev *rt2x00dev,
- struct data_queue *queue)
-{
- struct queue_entry_priv_pci *entry_priv =
- queue->entries[0].priv_data;
-
- if (entry_priv->desc)
- dma_free_coherent(rt2x00dev->dev,
- queue->limit * queue->desc_size,
- entry_priv->desc, entry_priv->desc_dma);
- entry_priv->desc = NULL;
-}
-
-int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev)
-{
- struct data_queue *queue;
- int status;
-
- /*
- * Allocate DMA
- */
- queue_for_each(rt2x00dev, queue) {
- status = rt2x00pci_alloc_queue_dma(rt2x00dev, queue);
- if (status)
- goto exit;
- }
-
- /*
- * Register interrupt handler.
- */
- status = request_irq(rt2x00dev->irq,
- rt2x00dev->ops->lib->irq_handler,
- IRQF_SHARED, rt2x00dev->name, rt2x00dev);
- if (status) {
- ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n",
- rt2x00dev->irq, status);
- goto exit;
- }
-
- return 0;
-
-exit:
- queue_for_each(rt2x00dev, queue)
- rt2x00pci_free_queue_dma(rt2x00dev, queue);
-
- return status;
-}
-EXPORT_SYMBOL_GPL(rt2x00pci_initialize);
-
-void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev)
-{
- struct data_queue *queue;
-
- /*
- * Free irq line.
- */
- free_irq(rt2x00dev->irq, rt2x00dev);
-
- /*
- * Free DMA
- */
- queue_for_each(rt2x00dev, queue)
- rt2x00pci_free_queue_dma(rt2x00dev, queue);
-}
-EXPORT_SYMBOL_GPL(rt2x00pci_uninitialize);
-
-/*
* PCI driver handlers.
*/
static void rt2x00pci_free_reg(struct rt2x00_dev *rt2x00dev)
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h
index e2c99f2b9a1..60d90b20f8b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.h
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.h
@@ -36,94 +36,6 @@
#define PCI_DEVICE_DATA(__ops) .driver_data = (kernel_ulong_t)(__ops)
/*
- * Register access.
- */
-static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev,
- const unsigned int offset,
- u32 *value)
-{
- *value = readl(rt2x00dev->csr.base + offset);
-}
-
-static inline void rt2x00pci_register_multiread(struct rt2x00_dev *rt2x00dev,
- const unsigned int offset,
- void *value, const u32 length)
-{
- memcpy_fromio(value, rt2x00dev->csr.base + offset, length);
-}
-
-static inline void rt2x00pci_register_write(struct rt2x00_dev *rt2x00dev,
- const unsigned int offset,
- u32 value)
-{
- writel(value, rt2x00dev->csr.base + offset);
-}
-
-static inline void rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev,
- const unsigned int offset,
- const void *value,
- const u32 length)
-{
- __iowrite32_copy(rt2x00dev->csr.base + offset, value, length >> 2);
-}
-
-/**
- * rt2x00pci_regbusy_read - Read from register with busy check
- * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
- * @offset: Register offset
- * @field: Field to check if register is busy
- * @reg: Pointer to where register contents should be stored
- *
- * This function will read the given register, and checks if the
- * register is busy. If it is, it will sleep for a couple of
- * microseconds before reading the register again. If the register
- * is not read after a certain timeout, this function will return
- * FALSE.
- */
-int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
- const unsigned int offset,
- const struct rt2x00_field32 field,
- u32 *reg);
-
-/**
- * struct queue_entry_priv_pci: Per entry PCI specific information
- *
- * @desc: Pointer to device descriptor
- * @desc_dma: DMA pointer to &desc.
- * @data: Pointer to device's entry memory.
- * @data_dma: DMA pointer to &data.
- */
-struct queue_entry_priv_pci {
- __le32 *desc;
- dma_addr_t desc_dma;
-};
-
-/**
- * rt2x00pci_rxdone - Handle RX done events
- * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
- *
- * Returns true if there are still rx frames pending and false if all
- * pending rx frames were processed.
- */
-bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev);
-
-/**
- * rt2x00pci_flush_queue - Flush data queue
- * @queue: Data queue to stop
- * @drop: True to drop all pending frames.
- *
- * This will wait for a maximum of 100ms, waiting for the queues
- * to become empty.
- */
-void rt2x00pci_flush_queue(struct data_queue *queue, bool drop);
-
-/*
- * Device initialization handlers.
- */
-int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev);
-void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev);
-
-/*
* PCI driver handlers.
*/
int rt2x00pci_probe(struct pci_dev *pci_dev, const struct rt2x00_ops *ops);
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index f95792cfcf8..9e3c8ff53e3 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -35,6 +35,7 @@
#include <linux/eeprom_93cx6.h>
#include "rt2x00.h"
+#include "rt2x00mmio.h"
#include "rt2x00pci.h"
#include "rt61pci.h"
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index cc1f7bf53fd..c6d77e20622 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -4,7 +4,7 @@ menu "Remoteproc drivers"
config REMOTEPROC
tristate
depends on HAS_DMA
- select FW_CONFIG
+ select FW_LOADER
select VIRTIO
config OMAP_REMOTEPROC
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 29387df4bfc..8edb4aed5d3 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -217,7 +217,7 @@ int rproc_alloc_vring(struct rproc_vdev *rvdev, int i)
* TODO: support predefined notifyids (via resource table)
*/
ret = idr_alloc(&rproc->notifyids, rvring, 0, 0, GFP_KERNEL);
- if (ret) {
+ if (ret < 0) {
dev_err(dev, "idr_alloc failed: %d\n", ret);
dma_free_coherent(dev->parent, size, va, dma);
return ret;
@@ -366,10 +366,12 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
/* it is now safe to add the virtio device */
ret = rproc_add_virtio_dev(rvdev, rsc->id);
if (ret)
- goto free_rvdev;
+ goto remove_rvdev;
return 0;
+remove_rvdev:
+ list_del(&rvdev->node);
free_rvdev:
kfree(rvdev);
return ret;
diff --git a/drivers/remoteproc/ste_modem_rproc.c b/drivers/remoteproc/ste_modem_rproc.c
index a7743c06933..fb95c422005 100644
--- a/drivers/remoteproc/ste_modem_rproc.c
+++ b/drivers/remoteproc/ste_modem_rproc.c
@@ -240,6 +240,8 @@ static int sproc_drv_remove(struct platform_device *pdev)
/* Unregister as remoteproc device */
rproc_del(sproc->rproc);
+ dma_free_coherent(sproc->rproc->dev.parent, SPROC_FW_SIZE,
+ sproc->fw_addr, sproc->fw_dma_addr);
rproc_put(sproc->rproc);
mdev->drv_data = NULL;
@@ -297,10 +299,13 @@ static int sproc_probe(struct platform_device *pdev)
/* Register as a remoteproc device */
err = rproc_add(rproc);
if (err)
- goto free_rproc;
+ goto free_mem;
return 0;
+free_mem:
+ dma_free_coherent(rproc->dev.parent, SPROC_FW_SIZE,
+ sproc->fw_addr, sproc->fw_dma_addr);
free_rproc:
/* Reset device data upon error */
mdev->drv_data = NULL;
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 8c0622399fc..6ccb7457746 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -769,6 +769,7 @@ struct qeth_card {
unsigned long thread_start_mask;
unsigned long thread_allowed_mask;
unsigned long thread_running_mask;
+ struct task_struct *recovery_task;
spinlock_t ip_lock;
struct list_head ip_list;
struct list_head *ip_tbd_list;
@@ -862,6 +863,8 @@ extern struct qeth_card_list_struct qeth_core_card_list;
extern struct kmem_cache *qeth_core_header_cache;
extern struct qeth_dbf_info qeth_dbf[QETH_DBF_INFOS];
+void qeth_set_recovery_task(struct qeth_card *);
+void qeth_clear_recovery_task(struct qeth_card *);
void qeth_set_allowed_threads(struct qeth_card *, unsigned long , int);
int qeth_threads_running(struct qeth_card *, unsigned long);
int qeth_wait_for_threads(struct qeth_card *, unsigned long);
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 0d73a999983..451f9202059 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -177,6 +177,23 @@ const char *qeth_get_cardname_short(struct qeth_card *card)
return "n/a";
}
+void qeth_set_recovery_task(struct qeth_card *card)
+{
+ card->recovery_task = current;
+}
+EXPORT_SYMBOL_GPL(qeth_set_recovery_task);
+
+void qeth_clear_recovery_task(struct qeth_card *card)
+{
+ card->recovery_task = NULL;
+}
+EXPORT_SYMBOL_GPL(qeth_clear_recovery_task);
+
+static bool qeth_is_recovery_task(const struct qeth_card *card)
+{
+ return card->recovery_task == current;
+}
+
void qeth_set_allowed_threads(struct qeth_card *card, unsigned long threads,
int clear_start_mask)
{
@@ -205,6 +222,8 @@ EXPORT_SYMBOL_GPL(qeth_threads_running);
int qeth_wait_for_threads(struct qeth_card *card, unsigned long threads)
{
+ if (qeth_is_recovery_task(card))
+ return 0;
return wait_event_interruptible(card->wait_q,
qeth_threads_running(card, threads) == 0);
}
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index d690166efea..155b101bd73 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -1143,6 +1143,7 @@ static int qeth_l2_recover(void *ptr)
QETH_CARD_TEXT(card, 2, "recover2");
dev_warn(&card->gdev->dev,
"A recovery process has been started for the device\n");
+ qeth_set_recovery_task(card);
__qeth_l2_set_offline(card->gdev, 1);
rc = __qeth_l2_set_online(card->gdev, 1);
if (!rc)
@@ -1153,6 +1154,7 @@ static int qeth_l2_recover(void *ptr)
dev_warn(&card->gdev->dev, "The qeth device driver "
"failed to recover an error on the device\n");
}
+ qeth_clear_recovery_task(card);
qeth_clear_thread_start_bit(card, QETH_RECOVER_THREAD);
qeth_clear_thread_running_bit(card, QETH_RECOVER_THREAD);
return 0;
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 8710337dab3..1f7edf1b26c 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -3515,6 +3515,7 @@ static int qeth_l3_recover(void *ptr)
QETH_CARD_TEXT(card, 2, "recover2");
dev_warn(&card->gdev->dev,
"A recovery process has been started for the device\n");
+ qeth_set_recovery_task(card);
__qeth_l3_set_offline(card->gdev, 1);
rc = __qeth_l3_set_online(card->gdev, 1);
if (!rc)
@@ -3525,6 +3526,7 @@ static int qeth_l3_recover(void *ptr)
dev_warn(&card->gdev->dev, "The qeth device driver "
"failed to recover an error on the device\n");
}
+ qeth_clear_recovery_task(card);
qeth_clear_thread_start_bit(card, QETH_RECOVER_THREAD);
qeth_clear_thread_running_bit(card, QETH_RECOVER_THREAD);
return 0;
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 484b6a3c9b0..302909ccf18 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -2643,9 +2643,9 @@ static int mxser_probe(struct pci_dev *pdev,
mxvar_sdriver, brd->idx + i, &pdev->dev);
if (IS_ERR(tty_dev)) {
retval = PTR_ERR(tty_dev);
- for (i--; i >= 0; i--)
+ for (; i > 0; i--)
tty_unregister_device(mxvar_sdriver,
- brd->idx + i);
+ brd->idx + i - 1);
goto err_relbrd;
}
}
@@ -2751,9 +2751,9 @@ static int __init mxser_module_init(void)
tty_dev = tty_port_register_device(&brd->ports[i].port,
mxvar_sdriver, brd->idx + i, NULL);
if (IS_ERR(tty_dev)) {
- for (i--; i >= 0; i--)
+ for (; i > 0; i--)
tty_unregister_device(mxvar_sdriver,
- brd->idx + i);
+ brd->idx + i - 1);
for (i = 0; i < brd->info->nports; i++)
tty_port_destroy(&brd->ports[i].port);
free_irq(brd->irq, brd);
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index b3455a970a1..35d9ab95c5c 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -429,7 +429,6 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
struct uart_8250_port uart;
int ret, line, flags = dev_id->driver_data;
- struct resource *res = NULL;
if (flags & UNKNOWN_DEV) {
ret = serial_pnp_guess_board(dev);
@@ -440,12 +439,11 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
memset(&uart, 0, sizeof(uart));
if (pnp_irq_valid(dev, 0))
uart.port.irq = pnp_irq(dev, 0);
- if ((flags & CIR_PORT) && pnp_port_valid(dev, 2))
- res = pnp_get_resource(dev, IORESOURCE_IO, 2);
- else if (pnp_port_valid(dev, 0))
- res = pnp_get_resource(dev, IORESOURCE_IO, 0);
- if (pnp_resource_enabled(res)) {
- uart.port.iobase = res->start;
+ if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) {
+ uart.port.iobase = pnp_port_start(dev, 2);
+ uart.port.iotype = UPIO_PORT;
+ } else if (pnp_port_valid(dev, 0)) {
+ uart.port.iobase = pnp_port_start(dev, 0);
uart.port.iotype = UPIO_PORT;
} else if (pnp_mem_valid(dev, 0)) {
uart.port.mapbase = pnp_mem_start(dev, 0);
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 4dc41408ecb..30d4f7a783c 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -886,6 +886,17 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
/* FIFO ENABLE, DMA MODE */
+ up->scr |= OMAP_UART_SCR_RX_TRIG_GRANU1_MASK;
+ /*
+ * NOTE: Setting OMAP_UART_SCR_RX_TRIG_GRANU1_MASK
+ * sets Enables the granularity of 1 for TRIGGER RX
+ * level. Along with setting RX FIFO trigger level
+ * to 1 (as noted below, 16 characters) and TLR[3:0]
+ * to zero this will result RX FIFO threshold level
+ * to 1 character, instead of 16 as noted in comment
+ * below.
+ */
+
/* Set receive FIFO threshold to 16 characters and
* transmit FIFO threshold to 16 spaces
*/
diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index 8189cb6a86a..7abc5c81af2 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -346,6 +346,7 @@ static long vfio_pci_ioctl(void *device_data,
if (!(hdr.flags & VFIO_IRQ_SET_DATA_NONE)) {
size_t size;
+ int max = vfio_pci_get_irq_count(vdev, hdr.index);
if (hdr.flags & VFIO_IRQ_SET_DATA_BOOL)
size = sizeof(uint8_t);
@@ -355,7 +356,7 @@ static long vfio_pci_ioctl(void *device_data,
return -EINVAL;
if (hdr.argsz - minsz < hdr.count * size ||
- hdr.count > vfio_pci_get_irq_count(vdev, hdr.index))
+ hdr.start >= max || hdr.start + hdr.count > max)
return -EINVAL;
data = memdup_user((void __user *)(arg + minsz),
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index aa85881d17b..2647ad8e1f1 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -1316,7 +1316,7 @@ static void __xen_evtchn_do_upcall(void)
{
int start_word_idx, start_bit_idx;
int word_idx, bit_idx;
- int i;
+ int i, irq;
int cpu = get_cpu();
struct shared_info *s = HYPERVISOR_shared_info;
struct vcpu_info *vcpu_info = __this_cpu_read(xen_vcpu);
@@ -1324,6 +1324,8 @@ static void __xen_evtchn_do_upcall(void)
do {
xen_ulong_t pending_words;
+ xen_ulong_t pending_bits;
+ struct irq_desc *desc;
vcpu_info->evtchn_upcall_pending = 0;
@@ -1335,6 +1337,17 @@ static void __xen_evtchn_do_upcall(void)
* selector flag. xchg_xen_ulong must contain an
* appropriate barrier.
*/
+ if ((irq = per_cpu(virq_to_irq, cpu)[VIRQ_TIMER]) != -1) {
+ int evtchn = evtchn_from_irq(irq);
+ word_idx = evtchn / BITS_PER_LONG;
+ pending_bits = evtchn % BITS_PER_LONG;
+ if (active_evtchns(cpu, s, word_idx) & (1ULL << pending_bits)) {
+ desc = irq_to_desc(irq);
+ if (desc)
+ generic_handle_irq_desc(irq, desc);
+ }
+ }
+
pending_words = xchg_xen_ulong(&vcpu_info->evtchn_pending_sel, 0);
start_word_idx = __this_cpu_read(current_word_idx);
@@ -1343,7 +1356,6 @@ static void __xen_evtchn_do_upcall(void)
word_idx = start_word_idx;
for (i = 0; pending_words != 0; i++) {
- xen_ulong_t pending_bits;
xen_ulong_t words;
words = MASK_LSBS(pending_words, word_idx);
@@ -1372,8 +1384,7 @@ static void __xen_evtchn_do_upcall(void)
do {
xen_ulong_t bits;
- int port, irq;
- struct irq_desc *desc;
+ int port;
bits = MASK_LSBS(pending_bits, bit_idx);