aboutsummaryrefslogtreecommitdiff
path: root/include/acpi
diff options
context:
space:
mode:
Diffstat (limited to 'include/acpi')
-rw-r--r--include/acpi/acbuffer.h235
-rw-r--r--include/acpi/acnames.h3
-rw-r--r--include/acpi/acpi_bus.h60
-rw-r--r--include/acpi/acpixf.h7
-rw-r--r--include/acpi/actbl.h60
-rw-r--r--include/acpi/actbl1.h16
-rw-r--r--include/acpi/actbl2.h123
-rw-r--r--include/acpi/actbl3.h13
-rw-r--r--include/acpi/actypes.h7
9 files changed, 444 insertions, 80 deletions
diff --git a/include/acpi/acbuffer.h b/include/acpi/acbuffer.h
new file mode 100644
index 00000000000..a1e45cdd729
--- /dev/null
+++ b/include/acpi/acbuffer.h
@@ -0,0 +1,235 @@
+/******************************************************************************
+ *
+ * Name: acbuffer.h - Support for buffers returned by ACPI predefined names
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACBUFFER_H__
+#define __ACBUFFER_H__
+
+/*
+ * Contains buffer structures for these predefined names:
+ * _FDE, _GRT, _GTM, _PLD, _SRT
+ */
+
+/*
+ * Note: C bitfields are not used for this reason:
+ *
+ * "Bitfields are great and easy to read, but unfortunately the C language
+ * does not specify the layout of bitfields in memory, which means they are
+ * essentially useless for dealing with packed data in on-disk formats or
+ * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,
+ * this decision was a design error in C. Ritchie could have picked an order
+ * and stuck with it." Norman Ramsey.
+ * See http://stackoverflow.com/a/1053662/41661
+ */
+
+/* _FDE return value */
+
+struct acpi_fde_info {
+ u32 floppy0;
+ u32 floppy1;
+ u32 floppy2;
+ u32 floppy3;
+ u32 tape;
+};
+
+/*
+ * _GRT return value
+ * _SRT input value
+ */
+struct acpi_grt_info {
+ u16 year;
+ u8 month;
+ u8 day;
+ u8 hour;
+ u8 minute;
+ u8 second;
+ u8 valid;
+ u16 milliseconds;
+ u16 timezone;
+ u8 daylight;
+ u8 reserved[3];
+};
+
+/* _GTM return value */
+
+struct acpi_gtm_info {
+ u32 pio_speed0;
+ u32 dma_speed0;
+ u32 pio_speed1;
+ u32 dma_speed1;
+ u32 flags;
+};
+
+/*
+ * Formatted _PLD return value. The minimum size is a package containing
+ * one buffer.
+ * Revision 1: Buffer is 16 bytes (128 bits)
+ * Revision 2: Buffer is 20 bytes (160 bits)
+ *
+ * Note: This structure is returned from the acpi_decode_pld_buffer
+ * interface.
+ */
+struct acpi_pld_info {
+ u8 revision;
+ u8 ignore_color;
+ u32 color;
+ u16 width;
+ u16 height;
+ u8 user_visible;
+ u8 dock;
+ u8 lid;
+ u8 panel;
+ u8 vertical_position;
+ u8 horizontal_position;
+ u8 shape;
+ u8 group_orientation;
+ u8 group_token;
+ u8 group_position;
+ u8 bay;
+ u8 ejectable;
+ u8 ospm_eject_required;
+ u8 cabinet_number;
+ u8 card_cage_number;
+ u8 reference;
+ u8 rotation;
+ u8 order;
+ u8 reserved;
+ u16 vertical_offset;
+ u16 horizontal_offset;
+};
+
+/*
+ * Macros to:
+ * 1) Convert a _PLD buffer to internal struct acpi_pld_info format - ACPI_PLD_GET*
+ * (Used by acpi_decode_pld_buffer)
+ * 2) Construct a _PLD buffer - ACPI_PLD_SET*
+ * (Intended for BIOS use only)
+ */
+#define ACPI_PLD_REV1_BUFFER_SIZE 16 /* For Revision 1 of the buffer (From ACPI spec) */
+#define ACPI_PLD_BUFFER_SIZE 20 /* For Revision 2 of the buffer (From ACPI spec) */
+
+/* First 32-bit dword, bits 0:32 */
+
+#define ACPI_PLD_GET_REVISION(dword) ACPI_GET_BITS (dword, 0, ACPI_7BIT_MASK)
+#define ACPI_PLD_SET_REVISION(dword,value) ACPI_SET_BITS (dword, 0, ACPI_7BIT_MASK, value) /* Offset 0, Len 7 */
+
+#define ACPI_PLD_GET_IGNORE_COLOR(dword) ACPI_GET_BITS (dword, 7, ACPI_1BIT_MASK)
+#define ACPI_PLD_SET_IGNORE_COLOR(dword,value) ACPI_SET_BITS (dword, 7, ACPI_1BIT_MASK, value) /* Offset 7, Len 1 */
+
+#define ACPI_PLD_GET_COLOR(dword) ACPI_GET_BITS (dword, 8, ACPI_24BIT_MASK)
+#define ACPI_PLD_SET_COLOR(dword,value) ACPI_SET_BITS (dword, 8, ACPI_24BIT_MASK, value) /* Offset 8, Len 24 */
+
+/* Second 32-bit dword, bits 33:63 */
+
+#define ACPI_PLD_GET_WIDTH(dword) ACPI_GET_BITS (dword, 0, ACPI_16BIT_MASK)
+#define ACPI_PLD_SET_WIDTH(dword,value) ACPI_SET_BITS (dword, 0, ACPI_16BIT_MASK, value) /* Offset 32+0=32, Len 16 */
+
+#define ACPI_PLD_GET_HEIGHT(dword) ACPI_GET_BITS (dword, 16, ACPI_16BIT_MASK)
+#define ACPI_PLD_SET_HEIGHT(dword,value) ACPI_SET_BITS (dword, 16, ACPI_16BIT_MASK, value) /* Offset 32+16=48, Len 16 */
+
+/* Third 32-bit dword, bits 64:95 */
+
+#define ACPI_PLD_GET_USER_VISIBLE(dword) ACPI_GET_BITS (dword, 0, ACPI_1BIT_MASK)
+#define ACPI_PLD_SET_USER_VISIBLE(dword,value) ACPI_SET_BITS (dword, 0, ACPI_1BIT_MASK, value) /* Offset 64+0=64, Len 1 */
+
+#define ACPI_PLD_GET_DOCK(dword) ACPI_GET_BITS (dword, 1, ACPI_1BIT_MASK)
+#define ACPI_PLD_SET_DOCK(dword,value) ACPI_SET_BITS (dword, 1, ACPI_1BIT_MASK, value) /* Offset 64+1=65, Len 1 */
+
+#define ACPI_PLD_GET_LID(dword) ACPI_GET_BITS (dword, 2, ACPI_1BIT_MASK)
+#define ACPI_PLD_SET_LID(dword,value) ACPI_SET_BITS (dword, 2, ACPI_1BIT_MASK, value) /* Offset 64+2=66, Len 1 */
+
+#define ACPI_PLD_GET_PANEL(dword) ACPI_GET_BITS (dword, 3, ACPI_3BIT_MASK)
+#define ACPI_PLD_SET_PANEL(dword,value) ACPI_SET_BITS (dword, 3, ACPI_3BIT_MASK, value) /* Offset 64+3=67, Len 3 */
+
+#define ACPI_PLD_GET_VERTICAL(dword) ACPI_GET_BITS (dword, 6, ACPI_2BIT_MASK)
+#define ACPI_PLD_SET_VERTICAL(dword,value) ACPI_SET_BITS (dword, 6, ACPI_2BIT_MASK, value) /* Offset 64+6=70, Len 2 */
+
+#define ACPI_PLD_GET_HORIZONTAL(dword) ACPI_GET_BITS (dword, 8, ACPI_2BIT_MASK)
+#define ACPI_PLD_SET_HORIZONTAL(dword,value) ACPI_SET_BITS (dword, 8, ACPI_2BIT_MASK, value) /* Offset 64+8=72, Len 2 */
+
+#define ACPI_PLD_GET_SHAPE(dword) ACPI_GET_BITS (dword, 10, ACPI_4BIT_MASK)
+#define ACPI_PLD_SET_SHAPE(dword,value) ACPI_SET_BITS (dword, 10, ACPI_4BIT_MASK, value) /* Offset 64+10=74, Len 4 */
+
+#define ACPI_PLD_GET_ORIENTATION(dword) ACPI_GET_BITS (dword, 14, ACPI_1BIT_MASK)
+#define ACPI_PLD_SET_ORIENTATION(dword,value) ACPI_SET_BITS (dword, 14, ACPI_1BIT_MASK, value) /* Offset 64+14=78, Len 1 */
+
+#define ACPI_PLD_GET_TOKEN(dword) ACPI_GET_BITS (dword, 15, ACPI_8BIT_MASK)
+#define ACPI_PLD_SET_TOKEN(dword,value) ACPI_SET_BITS (dword, 15, ACPI_8BIT_MASK, value) /* Offset 64+15=79, Len 8 */
+
+#define ACPI_PLD_GET_POSITION(dword) ACPI_GET_BITS (dword, 23, ACPI_8BIT_MASK)
+#define ACPI_PLD_SET_POSITION(dword,value) ACPI_SET_BITS (dword, 23, ACPI_8BIT_MASK, value) /* Offset 64+23=87, Len 8 */
+
+#define ACPI_PLD_GET_BAY(dword) ACPI_GET_BITS (dword, 31, ACPI_1BIT_MASK)
+#define ACPI_PLD_SET_BAY(dword,value) ACPI_SET_BITS (dword, 31, ACPI_1BIT_MASK, value) /* Offset 64+31=95, Len 1 */
+
+/* Fourth 32-bit dword, bits 96:127 */
+
+#define ACPI_PLD_GET_EJECTABLE(dword) ACPI_GET_BITS (dword, 0, ACPI_1BIT_MASK)
+#define ACPI_PLD_SET_EJECTABLE(dword,value) ACPI_SET_BITS (dword, 0, ACPI_1BIT_MASK, value) /* Offset 96+0=96, Len 1 */
+
+#define ACPI_PLD_GET_OSPM_EJECT(dword) ACPI_GET_BITS (dword, 1, ACPI_1BIT_MASK)
+#define ACPI_PLD_SET_OSPM_EJECT(dword,value) ACPI_SET_BITS (dword, 1, ACPI_1BIT_MASK, value) /* Offset 96+1=97, Len 1 */
+
+#define ACPI_PLD_GET_CABINET(dword) ACPI_GET_BITS (dword, 2, ACPI_8BIT_MASK)
+#define ACPI_PLD_SET_CABINET(dword,value) ACPI_SET_BITS (dword, 2, ACPI_8BIT_MASK, value) /* Offset 96+2=98, Len 8 */
+
+#define ACPI_PLD_GET_CARD_CAGE(dword) ACPI_GET_BITS (dword, 10, ACPI_8BIT_MASK)
+#define ACPI_PLD_SET_CARD_CAGE(dword,value) ACPI_SET_BITS (dword, 10, ACPI_8BIT_MASK, value) /* Offset 96+10=106, Len 8 */
+
+#define ACPI_PLD_GET_REFERENCE(dword) ACPI_GET_BITS (dword, 18, ACPI_1BIT_MASK)
+#define ACPI_PLD_SET_REFERENCE(dword,value) ACPI_SET_BITS (dword, 18, ACPI_1BIT_MASK, value) /* Offset 96+18=114, Len 1 */
+
+#define ACPI_PLD_GET_ROTATION(dword) ACPI_GET_BITS (dword, 19, ACPI_4BIT_MASK)
+#define ACPI_PLD_SET_ROTATION(dword,value) ACPI_SET_BITS (dword, 19, ACPI_4BIT_MASK, value) /* Offset 96+19=115, Len 4 */
+
+#define ACPI_PLD_GET_ORDER(dword) ACPI_GET_BITS (dword, 23, ACPI_5BIT_MASK)
+#define ACPI_PLD_SET_ORDER(dword,value) ACPI_SET_BITS (dword, 23, ACPI_5BIT_MASK, value) /* Offset 96+23=119, Len 5 */
+
+/* Fifth 32-bit dword, bits 128:159 (Revision 2 of _PLD only) */
+
+#define ACPI_PLD_GET_VERT_OFFSET(dword) ACPI_GET_BITS (dword, 0, ACPI_16BIT_MASK)
+#define ACPI_PLD_SET_VERT_OFFSET(dword,value) ACPI_SET_BITS (dword, 0, ACPI_16BIT_MASK, value) /* Offset 128+0=128, Len 16 */
+
+#define ACPI_PLD_GET_HORIZ_OFFSET(dword) ACPI_GET_BITS (dword, 16, ACPI_16BIT_MASK)
+#define ACPI_PLD_SET_HORIZ_OFFSET(dword,value) ACPI_SET_BITS (dword, 16, ACPI_16BIT_MASK, value) /* Offset 128+16=144, Len 16 */
+
+#endif /* ACBUFFER_H */
diff --git a/include/acpi/acnames.h b/include/acpi/acnames.h
index d988ac54f41..745dd24e3cb 100644
--- a/include/acpi/acnames.h
+++ b/include/acpi/acnames.h
@@ -63,11 +63,10 @@
#define METHOD_NAME__PRW "_PRW"
#define METHOD_NAME__SRS "_SRS"
#define METHOD_NAME__CBA "_CBA"
+#define METHOD_NAME__PLD "_PLD"
/* Method names - these methods must appear at the namespace root */
-#define METHOD_PATHNAME__BFS "\\_BFS"
-#define METHOD_PATHNAME__GTS "\\_GTS"
#define METHOD_PATHNAME__PTS "\\_PTS"
#define METHOD_PATHNAME__SST "\\_SI._SST"
#define METHOD_PATHNAME__WAK "\\_WAK"
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index bde976ee068..0daa0fbd865 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -54,37 +54,8 @@ acpi_status
acpi_evaluate_hotplug_ost(acpi_handle handle, u32 source_event,
u32 status_code, struct acpi_buffer *status_buf);
-struct acpi_pld {
- unsigned int revision:7; /* 0 */
- unsigned int ignore_colour:1; /* 7 */
- unsigned int colour:24; /* 8 */
- unsigned int width:16; /* 32 */
- unsigned int height:16; /* 48 */
- unsigned int user_visible:1; /* 64 */
- unsigned int dock:1; /* 65 */
- unsigned int lid:1; /* 66 */
- unsigned int panel:3; /* 67 */
- unsigned int vertical_pos:2; /* 70 */
- unsigned int horizontal_pos:2; /* 72 */
- unsigned int shape:4; /* 74 */
- unsigned int group_orientation:1; /* 78 */
- unsigned int group_token:8; /* 79 */
- unsigned int group_position:8; /* 87 */
- unsigned int bay:1; /* 95 */
- unsigned int ejectable:1; /* 96 */
- unsigned int ospm_eject_required:1; /* 97 */
- unsigned int cabinet_number:8; /* 98 */
- unsigned int card_cage_number:8; /* 106 */
- unsigned int reference:1; /* 114 */
- unsigned int rotation:4; /* 115 */
- unsigned int order:5; /* 119 */
- unsigned int reserved:4; /* 124 */
- unsigned int vertical_offset:16; /* 128 */
- unsigned int horizontal_offset:16; /* 144 */
-} __attribute__((__packed__));
-
acpi_status
-acpi_get_physical_device_location(acpi_handle handle, struct acpi_pld *pld);
+acpi_get_physical_device_location(acpi_handle handle, struct acpi_pld_info **pld);
#ifdef CONFIG_ACPI
#include <linux/proc_fs.h>
@@ -208,6 +179,7 @@ struct acpi_device_pnp {
struct list_head ids; /* _HID and _CIDs */
acpi_device_name device_name; /* Driver-determined */
acpi_device_class device_class; /* " */
+ union acpi_object *str_obj; /* unicode string for _STR method */
};
#define acpi_device_bid(d) ((d)->pnp.bus_id)
@@ -282,8 +254,16 @@ struct acpi_device_wakeup {
int prepare_count;
};
-/* Device */
+struct acpi_device_physical_node {
+ u8 node_id;
+ struct list_head node;
+ struct device *dev;
+};
+
+/* set maximum of physical nodes to 32 for expansibility */
+#define ACPI_MAX_PHYSICAL_NODE 32
+/* Device */
struct acpi_device {
int device_type;
acpi_handle handle; /* no handle for fixed hardware */
@@ -304,6 +284,10 @@ struct acpi_device {
struct device dev;
struct acpi_bus_ops bus_ops; /* workaround for different code path for hotplug */
enum acpi_bus_removal_type removal_type; /* indicate for different removal type */
+ u8 physical_node_count;
+ struct list_head physical_node_list;
+ struct mutex physical_node_lock;
+ DECLARE_BITMAP(physical_node_id_bitmap, ACPI_MAX_PHYSICAL_NODE);
};
static inline void *acpi_driver_data(struct acpi_device *d)
@@ -381,6 +365,19 @@ int acpi_match_device_ids(struct acpi_device *device,
int acpi_create_dir(struct acpi_device *);
void acpi_remove_dir(struct acpi_device *);
+
+/**
+ * module_acpi_driver(acpi_driver) - Helper macro for registering an ACPI driver
+ * @__acpi_driver: acpi_driver struct
+ *
+ * Helper macro for ACPI drivers which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+#define module_acpi_driver(__acpi_driver) \
+ module_driver(__acpi_driver, acpi_bus_register_driver, \
+ acpi_bus_unregister_driver)
+
/*
* Bind physical devices with ACPI devices
*/
@@ -394,7 +391,6 @@ struct acpi_bus_type {
};
int register_acpi_bus_type(struct acpi_bus_type *);
int unregister_acpi_bus_type(struct acpi_bus_type *);
-struct device *acpi_get_physical_device(acpi_handle);
struct acpi_pci_root {
struct list_head node;
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 51405d32ac6..8b891dbead6 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -47,11 +47,12 @@
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20120711
+#define ACPI_CA_VERSION 0x20120913
#include <acpi/acconfig.h>
#include <acpi/actypes.h>
#include <acpi/actbl.h>
+#include <acpi/acbuffer.h>
extern u8 acpi_gbl_permanent_mmap;
@@ -144,6 +145,10 @@ acpi_check_address_range(acpi_adr_space_type space_id,
acpi_physical_address address,
acpi_size length, u8 warn);
+acpi_status
+acpi_decode_pld_buffer(u8 *in_buffer,
+ acpi_size length, struct acpi_pld_info **return_buffer);
+
/*
* ACPI Memory management
*/
diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h
index 59a73e1b284..4f94b1d812d 100644
--- a/include/acpi/actbl.h
+++ b/include/acpi/actbl.h
@@ -79,9 +79,15 @@
#pragma pack(1)
/*
- * Note about bitfields: The u8 type is used for bitfields in ACPI tables.
- * This is the only type that is even remotely portable. Anything else is not
- * portable, so do not use any other bitfield types.
+ * Note: C bitfields are not used for this reason:
+ *
+ * "Bitfields are great and easy to read, but unfortunately the C language
+ * does not specify the layout of bitfields in memory, which means they are
+ * essentially useless for dealing with packed data in on-disk formats or
+ * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,
+ * this decision was a design error in C. Ritchie could have picked an order
+ * and stuck with it." Norman Ramsey.
+ * See http://stackoverflow.com/a/1053662/41661
*/
/*******************************************************************************
@@ -94,7 +100,7 @@
struct acpi_table_header {
char signature[ACPI_NAME_SIZE]; /* ASCII table signature */
u32 length; /* Length of table in bytes, including this header */
- u8 revision; /* ACPI Specification minor version # */
+ u8 revision; /* ACPI Specification minor version number */
u8 checksum; /* To make sum of entire table == 0 */
char oem_id[ACPI_OEM_ID_SIZE]; /* ASCII OEM identification */
char oem_table_id[ACPI_OEM_TABLE_ID_SIZE]; /* ASCII OEM table identification */
@@ -108,7 +114,7 @@ struct acpi_table_header {
* GAS - Generic Address Structure (ACPI 2.0+)
*
* Note: Since this structure is used in the ACPI tables, it is byte aligned.
- * If misaliged access is not supported by the hardware, accesses to the
+ * If misaligned access is not supported by the hardware, accesses to the
* 64-bit Address field must be performed with care.
*
******************************************************************************/
@@ -210,18 +216,18 @@ struct acpi_table_fadt {
u8 preferred_profile; /* Conveys preferred power management profile to OSPM. */
u16 sci_interrupt; /* System vector of SCI interrupt */
u32 smi_command; /* 32-bit Port address of SMI command port */
- u8 acpi_enable; /* Value to write to smi_cmd to enable ACPI */
- u8 acpi_disable; /* Value to write to smi_cmd to disable ACPI */
- u8 s4_bios_request; /* Value to write to SMI CMD to enter S4BIOS state */
+ u8 acpi_enable; /* Value to write to SMI_CMD to enable ACPI */
+ u8 acpi_disable; /* Value to write to SMI_CMD to disable ACPI */
+ u8 s4_bios_request; /* Value to write to SMI_CMD to enter S4BIOS state */
u8 pstate_control; /* Processor performance state control */
- u32 pm1a_event_block; /* 32-bit Port address of Power Mgt 1a Event Reg Blk */
- u32 pm1b_event_block; /* 32-bit Port address of Power Mgt 1b Event Reg Blk */
- u32 pm1a_control_block; /* 32-bit Port address of Power Mgt 1a Control Reg Blk */
- u32 pm1b_control_block; /* 32-bit Port address of Power Mgt 1b Control Reg Blk */
- u32 pm2_control_block; /* 32-bit Port address of Power Mgt 2 Control Reg Blk */
- u32 pm_timer_block; /* 32-bit Port address of Power Mgt Timer Ctrl Reg Blk */
- u32 gpe0_block; /* 32-bit Port address of General Purpose Event 0 Reg Blk */
- u32 gpe1_block; /* 32-bit Port address of General Purpose Event 1 Reg Blk */
+ u32 pm1a_event_block; /* 32-bit port address of Power Mgt 1a Event Reg Blk */
+ u32 pm1b_event_block; /* 32-bit port address of Power Mgt 1b Event Reg Blk */
+ u32 pm1a_control_block; /* 32-bit port address of Power Mgt 1a Control Reg Blk */
+ u32 pm1b_control_block; /* 32-bit port address of Power Mgt 1b Control Reg Blk */
+ u32 pm2_control_block; /* 32-bit port address of Power Mgt 2 Control Reg Blk */
+ u32 pm_timer_block; /* 32-bit port address of Power Mgt Timer Ctrl Reg Blk */
+ u32 gpe0_block; /* 32-bit port address of General Purpose Event 0 Reg Blk */
+ u32 gpe1_block; /* 32-bit port address of General Purpose Event 1 Reg Blk */
u8 pm1_event_length; /* Byte Length of ports at pm1x_event_block */
u8 pm1_control_length; /* Byte Length of ports at pm1x_control_block */
u8 pm2_control_length; /* Byte Length of ports at pm2_control_block */
@@ -229,12 +235,12 @@ struct acpi_table_fadt {
u8 gpe0_block_length; /* Byte Length of ports at gpe0_block */
u8 gpe1_block_length; /* Byte Length of ports at gpe1_block */
u8 gpe1_base; /* Offset in GPE number space where GPE1 events start */
- u8 cst_control; /* Support for the _CST object and C States change notification */
+ u8 cst_control; /* Support for the _CST object and C-States change notification */
u16 c2_latency; /* Worst case HW latency to enter/exit C2 state */
u16 c3_latency; /* Worst case HW latency to enter/exit C3 state */
- u16 flush_size; /* Processor's memory cache line width, in bytes */
+ u16 flush_size; /* Processor memory cache line width, in bytes */
u16 flush_stride; /* Number of flush strides that need to be read */
- u8 duty_offset; /* Processor duty cycle index in processor's P_CNT reg */
+ u8 duty_offset; /* Processor duty cycle index in processor P_CNT reg */
u8 duty_width; /* Processor duty cycle value bit width in P_CNT register */
u8 day_alarm; /* Index to day-of-month alarm in RTC CMOS RAM */
u8 month_alarm; /* Index to month-of-year alarm in RTC CMOS RAM */
@@ -255,11 +261,11 @@ struct acpi_table_fadt {
struct acpi_generic_address xpm_timer_block; /* 64-bit Extended Power Mgt Timer Ctrl Reg Blk address */
struct acpi_generic_address xgpe0_block; /* 64-bit Extended General Purpose Event 0 Reg Blk address */
struct acpi_generic_address xgpe1_block; /* 64-bit Extended General Purpose Event 1 Reg Blk address */
- struct acpi_generic_address sleep_control; /* 64-bit Sleep Control register */
- struct acpi_generic_address sleep_status; /* 64-bit Sleep Status register */
+ struct acpi_generic_address sleep_control; /* 64-bit Sleep Control register (ACPI 5.0) */
+ struct acpi_generic_address sleep_status; /* 64-bit Sleep Status register (ACPI 5.0) */
};
-/* Masks for FADT Boot Architecture Flags (boot_flags) */
+/* Masks for FADT Boot Architecture Flags (boot_flags) [Vx]=Introduced in this FADT revision */
#define ACPI_FADT_LEGACY_DEVICES (1) /* 00: [V2] System has LPC or ISA bus devices */
#define ACPI_FADT_8042 (1<<1) /* 01: [V3] System has an 8042 controller on port 60/64 */
@@ -272,13 +278,13 @@ struct acpi_table_fadt {
/* Masks for FADT flags */
-#define ACPI_FADT_WBINVD (1) /* 00: [V1] The wbinvd instruction works properly */
-#define ACPI_FADT_WBINVD_FLUSH (1<<1) /* 01: [V1] wbinvd flushes but does not invalidate caches */
+#define ACPI_FADT_WBINVD (1) /* 00: [V1] The WBINVD instruction works properly */
+#define ACPI_FADT_WBINVD_FLUSH (1<<1) /* 01: [V1] WBINVD flushes but does not invalidate caches */
#define ACPI_FADT_C1_SUPPORTED (1<<2) /* 02: [V1] All processors support C1 state */
#define ACPI_FADT_C2_MP_SUPPORTED (1<<3) /* 03: [V1] C2 state works on MP system */
#define ACPI_FADT_POWER_BUTTON (1<<4) /* 04: [V1] Power button is handled as a control method device */
#define ACPI_FADT_SLEEP_BUTTON (1<<5) /* 05: [V1] Sleep button is handled as a control method device */
-#define ACPI_FADT_FIXED_RTC (1<<6) /* 06: [V1] RTC wakeup status not in fixed register space */
+#define ACPI_FADT_FIXED_RTC (1<<6) /* 06: [V1] RTC wakeup status is not in fixed register space */
#define ACPI_FADT_S4_RTC_WAKE (1<<7) /* 07: [V1] RTC alarm can wake system from S4 */
#define ACPI_FADT_32BIT_TIMER (1<<8) /* 08: [V1] ACPI timer width is 32-bit (0=24-bit) */
#define ACPI_FADT_DOCKING_SUPPORTED (1<<9) /* 09: [V1] Docking supported */
@@ -297,7 +303,7 @@ struct acpi_table_fadt {
/* Values for preferred_profile (Preferred Power Management Profiles) */
-enum acpi_prefered_pm_profiles {
+enum acpi_preferred_pm_profiles {
PM_UNSPECIFIED = 0,
PM_DESKTOP = 1,
PM_MOBILE = 2,
@@ -335,7 +341,7 @@ union acpi_name_union {
struct acpi_table_desc {
acpi_physical_address address;
struct acpi_table_header *pointer;
- u32 length; /* Length fixed at 32 bits */
+ u32 length; /* Length fixed at 32 bits (fixed in table header) */
union acpi_name_union signature;
acpi_owner_id owner_id;
u8 flags;
diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h
index 300d14e7c5d..280fc45b59d 100644
--- a/include/acpi/actbl1.h
+++ b/include/acpi/actbl1.h
@@ -79,9 +79,15 @@
#pragma pack(1)
/*
- * Note about bitfields: The u8 type is used for bitfields in ACPI tables.
- * This is the only type that is even remotely portable. Anything else is not
- * portable, so do not use any other bitfield types.
+ * Note: C bitfields are not used for this reason:
+ *
+ * "Bitfields are great and easy to read, but unfortunately the C language
+ * does not specify the layout of bitfields in memory, which means they are
+ * essentially useless for dealing with packed data in on-disk formats or
+ * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,
+ * this decision was a design error in C. Ritchie could have picked an order
+ * and stuck with it." Norman Ramsey.
+ * See http://stackoverflow.com/a/1053662/41661
*/
/*******************************************************************************
@@ -489,7 +495,9 @@ enum acpi_hest_notify_types {
ACPI_HEST_NOTIFY_LOCAL = 2,
ACPI_HEST_NOTIFY_SCI = 3,
ACPI_HEST_NOTIFY_NMI = 4,
- ACPI_HEST_NOTIFY_RESERVED = 5 /* 5 and greater are reserved */
+ ACPI_HEST_NOTIFY_CMCI = 5, /* ACPI 5.0 */
+ ACPI_HEST_NOTIFY_MCE = 6, /* ACPI 5.0 */
+ ACPI_HEST_NOTIFY_RESERVED = 7 /* 7 and greater are reserved */
};
/* Values for config_write_enable bitfield above */
diff --git a/include/acpi/actbl2.h b/include/acpi/actbl2.h
index d9ceb3d3162..1b2b356486d 100644
--- a/include/acpi/actbl2.h
+++ b/include/acpi/actbl2.h
@@ -63,6 +63,8 @@
*/
#define ACPI_SIG_ASF "ASF!" /* Alert Standard Format table */
#define ACPI_SIG_BOOT "BOOT" /* Simple Boot Flag Table */
+#define ACPI_SIG_CSRT "CSRT" /* Core System Resource Table */
+#define ACPI_SIG_DBG2 "DBG2" /* Debug Port table type 2 */
#define ACPI_SIG_DBGP "DBGP" /* Debug Port table */
#define ACPI_SIG_DMAR "DMAR" /* DMA Remapping table */
#define ACPI_SIG_HPET "HPET" /* High Precision Event Timer table */
@@ -96,9 +98,15 @@
#pragma pack(1)
/*
- * Note about bitfields: The u8 type is used for bitfields in ACPI tables.
- * This is the only type that is even remotely portable. Anything else is not
- * portable, so do not use any other bitfield types.
+ * Note: C bitfields are not used for this reason:
+ *
+ * "Bitfields are great and easy to read, but unfortunately the C language
+ * does not specify the layout of bitfields in memory, which means they are
+ * essentially useless for dealing with packed data in on-disk formats or
+ * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,
+ * this decision was a design error in C. Ritchie could have picked an order
+ * and stuck with it." Norman Ramsey.
+ * See http://stackoverflow.com/a/1053662/41661
*/
/*******************************************************************************
@@ -232,6 +240,115 @@ struct acpi_table_boot {
/*******************************************************************************
*
+ * CSRT - Core System Resource Table
+ * Version 0
+ *
+ * Conforms to the "Core System Resource Table (CSRT)", November 14, 2011
+ *
+ ******************************************************************************/
+
+struct acpi_table_csrt {
+ struct acpi_table_header header; /* Common ACPI table header */
+};
+
+/* Resource Group subtable */
+
+struct acpi_csrt_group {
+ u32 length;
+ u32 vendor_id;
+ u32 subvendor_id;
+ u16 device_id;
+ u16 subdevice_id;
+ u16 revision;
+ u16 reserved;
+ u32 info_length;
+
+ /* Shared data (length = info_length) immediately follows */
+};
+
+/* Resource Descriptor subtable */
+
+struct acpi_csrt_descriptor {
+ u32 length;
+ u16 type;
+ u16 subtype;
+ u32 uid;
+
+ /* Resource-specific information immediately follows */
+};
+
+/* Resource Types */
+
+#define ACPI_CSRT_TYPE_INTERRUPT 0x0001
+#define ACPI_CSRT_TYPE_TIMER 0x0002
+#define ACPI_CSRT_TYPE_DMA 0x0003
+
+/* Resource Subtypes */
+
+#define ACPI_CSRT_XRUPT_LINE 0x0000
+#define ACPI_CSRT_XRUPT_CONTROLLER 0x0001
+#define ACPI_CSRT_TIMER 0x0000
+#define ACPI_CSRT_DMA_CHANNEL 0x0000
+#define ACPI_CSRT_DMA_CONTROLLER 0x0001
+
+/*******************************************************************************
+ *
+ * DBG2 - Debug Port Table 2
+ * Version 0 (Both main table and subtables)
+ *
+ * Conforms to "Microsoft Debug Port Table 2 (DBG2)", May 22 2012.
+ *
+ ******************************************************************************/
+
+struct acpi_table_dbg2 {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u32 info_offset;
+ u32 info_count;
+};
+
+/* Debug Device Information Subtable */
+
+struct acpi_dbg2_device {
+ u8 revision;
+ u16 length;
+ u8 register_count; /* Number of base_address registers */
+ u16 namepath_length;
+ u16 namepath_offset;
+ u16 oem_data_length;
+ u16 oem_data_offset;
+ u16 port_type;
+ u16 port_subtype;
+ u16 reserved;
+ u16 base_address_offset;
+ u16 address_size_offset;
+ /*
+ * Data that follows:
+ * base_address (required) - Each in 12-byte Generic Address Structure format.
+ * address_size (required) - Array of u32 sizes corresponding to each base_address register.
+ * Namepath (required) - Null terminated string. Single dot if not supported.
+ * oem_data (optional) - Length is oem_data_length.
+ */
+};
+
+/* Types for port_type field above */
+
+#define ACPI_DBG2_SERIAL_PORT 0x8000
+#define ACPI_DBG2_1394_PORT 0x8001
+#define ACPI_DBG2_USB_PORT 0x8002
+#define ACPI_DBG2_NET_PORT 0x8003
+
+/* Subtypes for port_subtype field above */
+
+#define ACPI_DBG2_16550_COMPATIBLE 0x0000
+#define ACPI_DBG2_16550_SUBSET 0x0001
+
+#define ACPI_DBG2_1394_STANDARD 0x0000
+
+#define ACPI_DBG2_USB_XHCI 0x0000
+#define ACPI_DBG2_USB_EHCI 0x0001
+
+/*******************************************************************************
+ *
* DBGP - Debug Port table
* Version 1
*
diff --git a/include/acpi/actbl3.h b/include/acpi/actbl3.h
index f65a0ed869e..8c61b5fe42a 100644
--- a/include/acpi/actbl3.h
+++ b/include/acpi/actbl3.h
@@ -75,7 +75,6 @@
/* Reserved table signatures */
#define ACPI_SIG_CSRT "CSRT" /* Core System Resources Table */
-#define ACPI_SIG_DBG2 "DBG2" /* Debug Port table 2 */
#define ACPI_SIG_MATR "MATR" /* Memory Address Translation Table */
#define ACPI_SIG_MSDM "MSDM" /* Microsoft Data Management Table */
#define ACPI_SIG_WPBT "WPBT" /* Windows Platform Binary Table */
@@ -87,9 +86,15 @@
#pragma pack(1)
/*
- * Note about bitfields: The u8 type is used for bitfields in ACPI tables.
- * This is the only type that is even remotely portable. Anything else is not
- * portable, so do not use any other bitfield types.
+ * Note: C bitfields are not used for this reason:
+ *
+ * "Bitfields are great and easy to read, but unfortunately the C language
+ * does not specify the layout of bitfields in memory, which means they are
+ * essentially useless for dealing with packed data in on-disk formats or
+ * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,
+ * this decision was a design error in C. Ritchie could have picked an order
+ * and stuck with it." Norman Ramsey.
+ * See http://stackoverflow.com/a/1053662/41661
*/
/*******************************************************************************
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index 3d00bd5bd7e..a85bae96826 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -519,13 +519,6 @@ typedef u64 acpi_integer;
#define ACPI_SLEEP_TYPE_INVALID 0xFF
/*
- * Sleep/Wake flags
- */
-#define ACPI_NO_OPTIONAL_METHODS 0x00 /* Do not execute any optional methods */
-#define ACPI_EXECUTE_GTS 0x01 /* For enter sleep interface */
-#define ACPI_EXECUTE_BFS 0x02 /* For leave sleep prep interface */
-
-/*
* Standard notify values
*/
#define ACPI_NOTIFY_BUS_CHECK (u8) 0x00