diff options
Diffstat (limited to 'include/linux/edac.h')
| -rw-r--r-- | include/linux/edac.h | 358 |
1 files changed, 354 insertions, 4 deletions
diff --git a/include/linux/edac.h b/include/linux/edac.h index 4a73257b47d..1cd3947987e 100644 --- a/include/linux/edac.h +++ b/include/linux/edac.h @@ -13,7 +13,7 @@ #define _LINUX_EDAC_H_ #include <linux/atomic.h> -#include <linux/sysdev.h> +#include <linux/device.h> #define EDAC_OPSTATE_INVAL -1 #define EDAC_OPSTATE_POLL 0 @@ -23,12 +23,12 @@ extern int edac_op_state; extern int edac_err_assert; extern atomic_t edac_handlers; -extern struct sysdev_class edac_class; +extern struct bus_type edac_subsys; extern int edac_handler_set(void); extern void edac_atomic_assert_error(void); -extern struct sysdev_class *edac_get_sysfs_class(void); -extern void edac_put_sysfs_class(void); +extern struct bus_type *edac_get_sysfs_subsys(void); +extern void edac_put_sysfs_subsys(void); static inline void opstate_init(void) { @@ -42,4 +42,354 @@ static inline void opstate_init(void) return; } +#define EDAC_MC_LABEL_LEN 31 +#define MC_PROC_NAME_MAX_LEN 7 + +/* memory devices */ +enum dev_type { + DEV_UNKNOWN = 0, + DEV_X1, + DEV_X2, + DEV_X4, + DEV_X8, + DEV_X16, + DEV_X32, /* Do these parts exist? */ + DEV_X64 /* Do these parts exist? */ +}; + +#define DEV_FLAG_UNKNOWN BIT(DEV_UNKNOWN) +#define DEV_FLAG_X1 BIT(DEV_X1) +#define DEV_FLAG_X2 BIT(DEV_X2) +#define DEV_FLAG_X4 BIT(DEV_X4) +#define DEV_FLAG_X8 BIT(DEV_X8) +#define DEV_FLAG_X16 BIT(DEV_X16) +#define DEV_FLAG_X32 BIT(DEV_X32) +#define DEV_FLAG_X64 BIT(DEV_X64) + +/* memory types */ +enum mem_type { + MEM_EMPTY = 0, /* Empty csrow */ + MEM_RESERVED, /* Reserved csrow type */ + MEM_UNKNOWN, /* Unknown csrow type */ + MEM_FPM, /* Fast page mode */ + MEM_EDO, /* Extended data out */ + MEM_BEDO, /* Burst Extended data out */ + MEM_SDR, /* Single data rate SDRAM */ + MEM_RDR, /* Registered single data rate SDRAM */ + MEM_DDR, /* Double data rate SDRAM */ + MEM_RDDR, /* Registered Double data rate SDRAM */ + MEM_RMBS, /* Rambus DRAM */ + MEM_DDR2, /* DDR2 RAM */ + MEM_FB_DDR2, /* fully buffered DDR2 */ + MEM_RDDR2, /* Registered DDR2 RAM */ + MEM_XDR, /* Rambus XDR */ + MEM_DDR3, /* DDR3 RAM */ + MEM_RDDR3, /* Registered DDR3 RAM */ +}; + +#define MEM_FLAG_EMPTY BIT(MEM_EMPTY) +#define MEM_FLAG_RESERVED BIT(MEM_RESERVED) +#define MEM_FLAG_UNKNOWN BIT(MEM_UNKNOWN) +#define MEM_FLAG_FPM BIT(MEM_FPM) +#define MEM_FLAG_EDO BIT(MEM_EDO) +#define MEM_FLAG_BEDO BIT(MEM_BEDO) +#define MEM_FLAG_SDR BIT(MEM_SDR) +#define MEM_FLAG_RDR BIT(MEM_RDR) +#define MEM_FLAG_DDR BIT(MEM_DDR) +#define MEM_FLAG_RDDR BIT(MEM_RDDR) +#define MEM_FLAG_RMBS BIT(MEM_RMBS) +#define MEM_FLAG_DDR2 BIT(MEM_DDR2) +#define MEM_FLAG_FB_DDR2 BIT(MEM_FB_DDR2) +#define MEM_FLAG_RDDR2 BIT(MEM_RDDR2) +#define MEM_FLAG_XDR BIT(MEM_XDR) +#define MEM_FLAG_DDR3 BIT(MEM_DDR3) +#define MEM_FLAG_RDDR3 BIT(MEM_RDDR3) + +/* chipset Error Detection and Correction capabilities and mode */ +enum edac_type { + EDAC_UNKNOWN = 0, /* Unknown if ECC is available */ + EDAC_NONE, /* Doesn't support ECC */ + EDAC_RESERVED, /* Reserved ECC type */ + EDAC_PARITY, /* Detects parity errors */ + EDAC_EC, /* Error Checking - no correction */ + EDAC_SECDED, /* Single bit error correction, Double detection */ + EDAC_S2ECD2ED, /* Chipkill x2 devices - do these exist? */ + EDAC_S4ECD4ED, /* Chipkill x4 devices */ + EDAC_S8ECD8ED, /* Chipkill x8 devices */ + EDAC_S16ECD16ED, /* Chipkill x16 devices */ +}; + +#define EDAC_FLAG_UNKNOWN BIT(EDAC_UNKNOWN) +#define EDAC_FLAG_NONE BIT(EDAC_NONE) +#define EDAC_FLAG_PARITY BIT(EDAC_PARITY) +#define EDAC_FLAG_EC BIT(EDAC_EC) +#define EDAC_FLAG_SECDED BIT(EDAC_SECDED) +#define EDAC_FLAG_S2ECD2ED BIT(EDAC_S2ECD2ED) +#define EDAC_FLAG_S4ECD4ED BIT(EDAC_S4ECD4ED) +#define EDAC_FLAG_S8ECD8ED BIT(EDAC_S8ECD8ED) +#define EDAC_FLAG_S16ECD16ED BIT(EDAC_S16ECD16ED) + +/* scrubbing capabilities */ +enum scrub_type { + SCRUB_UNKNOWN = 0, /* Unknown if scrubber is available */ + SCRUB_NONE, /* No scrubber */ + SCRUB_SW_PROG, /* SW progressive (sequential) scrubbing */ + SCRUB_SW_SRC, /* Software scrub only errors */ + SCRUB_SW_PROG_SRC, /* Progressive software scrub from an error */ + SCRUB_SW_TUNABLE, /* Software scrub frequency is tunable */ + SCRUB_HW_PROG, /* HW progressive (sequential) scrubbing */ + SCRUB_HW_SRC, /* Hardware scrub only errors */ + SCRUB_HW_PROG_SRC, /* Progressive hardware scrub from an error */ + SCRUB_HW_TUNABLE /* Hardware scrub frequency is tunable */ +}; + +#define SCRUB_FLAG_SW_PROG BIT(SCRUB_SW_PROG) +#define SCRUB_FLAG_SW_SRC BIT(SCRUB_SW_SRC) +#define SCRUB_FLAG_SW_PROG_SRC BIT(SCRUB_SW_PROG_SRC) +#define SCRUB_FLAG_SW_TUN BIT(SCRUB_SW_SCRUB_TUNABLE) +#define SCRUB_FLAG_HW_PROG BIT(SCRUB_HW_PROG) +#define SCRUB_FLAG_HW_SRC BIT(SCRUB_HW_SRC) +#define SCRUB_FLAG_HW_PROG_SRC BIT(SCRUB_HW_PROG_SRC) +#define SCRUB_FLAG_HW_TUN BIT(SCRUB_HW_TUNABLE) + +/* FIXME - should have notify capabilities: NMI, LOG, PROC, etc */ + +/* EDAC internal operation states */ +#define OP_ALLOC 0x100 +#define OP_RUNNING_POLL 0x201 +#define OP_RUNNING_INTERRUPT 0x202 +#define OP_RUNNING_POLL_INTR 0x203 +#define OP_OFFLINE 0x300 + +/* + * There are several things to be aware of that aren't at all obvious: + * + * + * SOCKETS, SOCKET SETS, BANKS, ROWS, CHIP-SELECT ROWS, CHANNELS, etc.. + * + * These are some of the many terms that are thrown about that don't always + * mean what people think they mean (Inconceivable!). In the interest of + * creating a common ground for discussion, terms and their definitions + * will be established. + * + * Memory devices: The individual chip on a memory stick. These devices + * commonly output 4 and 8 bits each. Grouping several + * of these in parallel provides 64 bits which is common + * for a memory stick. + * + * Memory Stick: A printed circuit board that aggregates multiple + * memory devices in parallel. This is the atomic + * memory component that is purchaseable by Joe consumer + * and loaded into a memory socket. + * + * Socket: A physical connector on the motherboard that accepts + * a single memory stick. + * + * Channel: Set of memory devices on a memory stick that must be + * grouped in parallel with one or more additional + * channels from other memory sticks. This parallel + * grouping of the output from multiple channels are + * necessary for the smallest granularity of memory access. + * Some memory controllers are capable of single channel - + * which means that memory sticks can be loaded + * individually. Other memory controllers are only + * capable of dual channel - which means that memory + * sticks must be loaded as pairs (see "socket set"). + * + * Chip-select row: All of the memory devices that are selected together. + * for a single, minimum grain of memory access. + * This selects all of the parallel memory devices across + * all of the parallel channels. Common chip-select rows + * for single channel are 64 bits, for dual channel 128 + * bits. + * + * Single-Ranked stick: A Single-ranked stick has 1 chip-select row of memory. + * Motherboards commonly drive two chip-select pins to + * a memory stick. A single-ranked stick, will occupy + * only one of those rows. The other will be unused. + * + * Double-Ranked stick: A double-ranked stick has two chip-select rows which + * access different sets of memory devices. The two + * rows cannot be accessed concurrently. + * + * Double-sided stick: DEPRECATED TERM, see Double-Ranked stick. + * A double-sided stick has two chip-select rows which + * access different sets of memory devices. The two + * rows cannot be accessed concurrently. "Double-sided" + * is irrespective of the memory devices being mounted + * on both sides of the memory stick. + * + * Socket set: All of the memory sticks that are required for + * a single memory access or all of the memory sticks + * spanned by a chip-select row. A single socket set + * has two chip-select rows and if double-sided sticks + * are used these will occupy those chip-select rows. + * + * Bank: This term is avoided because it is unclear when + * needing to distinguish between chip-select rows and + * socket sets. + * + * Controller pages: + * + * Physical pages: + * + * Virtual pages: + * + * + * STRUCTURE ORGANIZATION AND CHOICES + * + * + * + * PS - I enjoyed writing all that about as much as you enjoyed reading it. + */ + +struct channel_info { + int chan_idx; /* channel index */ + u32 ce_count; /* Correctable Errors for this CHANNEL */ + char label[EDAC_MC_LABEL_LEN + 1]; /* DIMM label on motherboard */ + struct csrow_info *csrow; /* the parent */ +}; + +struct csrow_info { + unsigned long first_page; /* first page number in dimm */ + unsigned long last_page; /* last page number in dimm */ + unsigned long page_mask; /* used for interleaving - + * 0UL for non intlv + */ + u32 nr_pages; /* number of pages in csrow */ + u32 grain; /* granularity of reported error in bytes */ + int csrow_idx; /* the chip-select row */ + enum dev_type dtype; /* memory device type */ + u32 ue_count; /* Uncorrectable Errors for this csrow */ + u32 ce_count; /* Correctable Errors for this csrow */ + enum mem_type mtype; /* memory csrow type */ + enum edac_type edac_mode; /* EDAC mode for this csrow */ + struct mem_ctl_info *mci; /* the parent */ + + struct kobject kobj; /* sysfs kobject for this csrow */ + + /* channel information for this csrow */ + u32 nr_channels; + struct channel_info *channels; +}; + +struct mcidev_sysfs_group { + const char *name; /* group name */ + const struct mcidev_sysfs_attribute *mcidev_attr; /* group attributes */ +}; + +struct mcidev_sysfs_group_kobj { + struct list_head list; /* list for all instances within a mc */ + + struct kobject kobj; /* kobj for the group */ + + const struct mcidev_sysfs_group *grp; /* group description table */ + struct mem_ctl_info *mci; /* the parent */ +}; + +/* mcidev_sysfs_attribute structure + * used for driver sysfs attributes and in mem_ctl_info + * sysfs top level entries + */ +struct mcidev_sysfs_attribute { + /* It should use either attr or grp */ + struct attribute attr; + const struct mcidev_sysfs_group *grp; /* Points to a group of attributes */ + + /* Ops for show/store values at the attribute - not used on group */ + ssize_t (*show)(struct mem_ctl_info *,char *); + ssize_t (*store)(struct mem_ctl_info *, const char *,size_t); +}; + +/* MEMORY controller information structure + */ +struct mem_ctl_info { + struct list_head link; /* for global list of mem_ctl_info structs */ + + struct module *owner; /* Module owner of this control struct */ + + unsigned long mtype_cap; /* memory types supported by mc */ + unsigned long edac_ctl_cap; /* Mem controller EDAC capabilities */ + unsigned long edac_cap; /* configuration capabilities - this is + * closely related to edac_ctl_cap. The + * difference is that the controller may be + * capable of s4ecd4ed which would be listed + * in edac_ctl_cap, but if channels aren't + * capable of s4ecd4ed then the edac_cap would + * not have that capability. + */ + unsigned long scrub_cap; /* chipset scrub capabilities */ + enum scrub_type scrub_mode; /* current scrub mode */ + + /* Translates sdram memory scrub rate given in bytes/sec to the + internal representation and configures whatever else needs + to be configured. + */ + int (*set_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 bw); + + /* Get the current sdram memory scrub rate from the internal + representation and converts it to the closest matching + bandwidth in bytes/sec. + */ + int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci); + + + /* pointer to edac checking routine */ + void (*edac_check) (struct mem_ctl_info * mci); + + /* + * Remaps memory pages: controller pages to physical pages. + * For most MC's, this will be NULL. + */ + /* FIXME - why not send the phys page to begin with? */ + unsigned long (*ctl_page_to_phys) (struct mem_ctl_info * mci, + unsigned long page); + int mc_idx; + int nr_csrows; + struct csrow_info *csrows; + /* + * FIXME - what about controllers on other busses? - IDs must be + * unique. dev pointer should be sufficiently unique, but + * BUS:SLOT.FUNC numbers may not be unique. + */ + struct device *dev; + const char *mod_name; + const char *mod_ver; + const char *ctl_name; + const char *dev_name; + char proc_name[MC_PROC_NAME_MAX_LEN + 1]; + void *pvt_info; + u32 ue_noinfo_count; /* Uncorrectable Errors w/o info */ + u32 ce_noinfo_count; /* Correctable Errors w/o info */ + u32 ue_count; /* Total Uncorrectable Errors for this MC */ + u32 ce_count; /* Total Correctable Errors for this MC */ + unsigned long start_time; /* mci load start time (in jiffies) */ + + struct completion complete; + + /* edac sysfs device control */ + struct kobject edac_mci_kobj; + + /* list for all grp instances within a mc */ + struct list_head grp_kobj_list; + + /* Additional top controller level attributes, but specified + * by the low level driver. + * + * Set by the low level driver to provide attributes at the + * controller level, same level as 'ue_count' and 'ce_count' above. + * An array of structures, NULL terminated + * + * If attributes are desired, then set to array of attributes + * If no attributes are desired, leave NULL + */ + const struct mcidev_sysfs_attribute *mc_driver_sysfs_attributes; + + /* work struct for this MC */ + struct delayed_work work; + + /* the internal state of this controller instance */ + int op_state; +}; + #endif |