diff options
Diffstat (limited to 'include/linux/input')
-rw-r--r-- | include/linux/input/adp5589.h | 157 | ||||
-rw-r--r-- | include/linux/input/adxl34x.h | 21 | ||||
-rw-r--r-- | include/linux/input/auo-pixcir-ts.h | 56 | ||||
-rw-r--r-- | include/linux/input/gp2ap002a00f.h | 22 | ||||
-rw-r--r-- | include/linux/input/gpio_tilt.h | 73 | ||||
-rw-r--r-- | include/linux/input/pixcir_ts.h | 10 | ||||
-rw-r--r-- | include/linux/input/samsung-keypad.h | 43 | ||||
-rw-r--r-- | include/linux/input/tca8418_keypad.h | 44 |
8 files changed, 328 insertions, 98 deletions
diff --git a/include/linux/input/adp5589.h b/include/linux/input/adp5589.h index ef792ecfaab..1a05eee15e6 100644 --- a/include/linux/input/adp5589.h +++ b/include/linux/input/adp5589.h @@ -1,5 +1,5 @@ /* - * Analog Devices ADP5589 I/O Expander and QWERTY Keypad Controller + * Analog Devices ADP5589/ADP5585 I/O Expander and QWERTY Keypad Controller * * Copyright 2010-2011 Analog Devices Inc. * @@ -9,89 +9,9 @@ #ifndef _ADP5589_H #define _ADP5589_H -#define ADP5589_ID 0x00 -#define ADP5589_INT_STATUS 0x01 -#define ADP5589_STATUS 0x02 -#define ADP5589_FIFO_1 0x03 -#define ADP5589_FIFO_2 0x04 -#define ADP5589_FIFO_3 0x05 -#define ADP5589_FIFO_4 0x06 -#define ADP5589_FIFO_5 0x07 -#define ADP5589_FIFO_6 0x08 -#define ADP5589_FIFO_7 0x09 -#define ADP5589_FIFO_8 0x0A -#define ADP5589_FIFO_9 0x0B -#define ADP5589_FIFO_10 0x0C -#define ADP5589_FIFO_11 0x0D -#define ADP5589_FIFO_12 0x0E -#define ADP5589_FIFO_13 0x0F -#define ADP5589_FIFO_14 0x10 -#define ADP5589_FIFO_15 0x11 -#define ADP5589_FIFO_16 0x12 -#define ADP5589_GPI_INT_STAT_A 0x13 -#define ADP5589_GPI_INT_STAT_B 0x14 -#define ADP5589_GPI_INT_STAT_C 0x15 -#define ADP5589_GPI_STATUS_A 0x16 -#define ADP5589_GPI_STATUS_B 0x17 -#define ADP5589_GPI_STATUS_C 0x18 -#define ADP5589_RPULL_CONFIG_A 0x19 -#define ADP5589_RPULL_CONFIG_B 0x1A -#define ADP5589_RPULL_CONFIG_C 0x1B -#define ADP5589_RPULL_CONFIG_D 0x1C -#define ADP5589_RPULL_CONFIG_E 0x1D -#define ADP5589_GPI_INT_LEVEL_A 0x1E -#define ADP5589_GPI_INT_LEVEL_B 0x1F -#define ADP5589_GPI_INT_LEVEL_C 0x20 -#define ADP5589_GPI_EVENT_EN_A 0x21 -#define ADP5589_GPI_EVENT_EN_B 0x22 -#define ADP5589_GPI_EVENT_EN_C 0x23 -#define ADP5589_GPI_INTERRUPT_EN_A 0x24 -#define ADP5589_GPI_INTERRUPT_EN_B 0x25 -#define ADP5589_GPI_INTERRUPT_EN_C 0x26 -#define ADP5589_DEBOUNCE_DIS_A 0x27 -#define ADP5589_DEBOUNCE_DIS_B 0x28 -#define ADP5589_DEBOUNCE_DIS_C 0x29 -#define ADP5589_GPO_DATA_OUT_A 0x2A -#define ADP5589_GPO_DATA_OUT_B 0x2B -#define ADP5589_GPO_DATA_OUT_C 0x2C -#define ADP5589_GPO_OUT_MODE_A 0x2D -#define ADP5589_GPO_OUT_MODE_B 0x2E -#define ADP5589_GPO_OUT_MODE_C 0x2F -#define ADP5589_GPIO_DIRECTION_A 0x30 -#define ADP5589_GPIO_DIRECTION_B 0x31 -#define ADP5589_GPIO_DIRECTION_C 0x32 -#define ADP5589_UNLOCK1 0x33 -#define ADP5589_UNLOCK2 0x34 -#define ADP5589_EXT_LOCK_EVENT 0x35 -#define ADP5589_UNLOCK_TIMERS 0x36 -#define ADP5589_LOCK_CFG 0x37 -#define ADP5589_RESET1_EVENT_A 0x38 -#define ADP5589_RESET1_EVENT_B 0x39 -#define ADP5589_RESET1_EVENT_C 0x3A -#define ADP5589_RESET2_EVENT_A 0x3B -#define ADP5589_RESET2_EVENT_B 0x3C -#define ADP5589_RESET_CFG 0x3D -#define ADP5589_PWM_OFFT_LOW 0x3E -#define ADP5589_PWM_OFFT_HIGH 0x3F -#define ADP5589_PWM_ONT_LOW 0x40 -#define ADP5589_PWM_ONT_HIGH 0x41 -#define ADP5589_PWM_CFG 0x42 -#define ADP5589_CLOCK_DIV_CFG 0x43 -#define ADP5589_LOGIC_1_CFG 0x44 -#define ADP5589_LOGIC_2_CFG 0x45 -#define ADP5589_LOGIC_FF_CFG 0x46 -#define ADP5589_LOGIC_INT_EVENT_EN 0x47 -#define ADP5589_POLL_PTIME_CFG 0x48 -#define ADP5589_PIN_CONFIG_A 0x49 -#define ADP5589_PIN_CONFIG_B 0x4A -#define ADP5589_PIN_CONFIG_C 0x4B -#define ADP5589_PIN_CONFIG_D 0x4C -#define ADP5589_GENERAL_CFG 0x4D -#define ADP5589_INT_EN 0x4E - -#define ADP5589_DEVICE_ID_MASK 0xF - -/* Put one of these structures in i2c_board_info platform_data */ +/* + * ADP5589 specific GPI and Keymap defines + */ #define ADP5589_KEYMAPSIZE 88 @@ -127,6 +47,35 @@ #define ADP5589_GPIMAPSIZE_MAX (ADP5589_GPI_PIN_END - ADP5589_GPI_PIN_BASE + 1) +/* + * ADP5585 specific GPI and Keymap defines + */ + +#define ADP5585_KEYMAPSIZE 30 + +#define ADP5585_GPI_PIN_ROW0 37 +#define ADP5585_GPI_PIN_ROW1 38 +#define ADP5585_GPI_PIN_ROW2 39 +#define ADP5585_GPI_PIN_ROW3 40 +#define ADP5585_GPI_PIN_ROW4 41 +#define ADP5585_GPI_PIN_ROW5 42 +#define ADP5585_GPI_PIN_COL0 43 +#define ADP5585_GPI_PIN_COL1 44 +#define ADP5585_GPI_PIN_COL2 45 +#define ADP5585_GPI_PIN_COL3 46 +#define ADP5585_GPI_PIN_COL4 47 +#define GPI_LOGIC 48 + +#define ADP5585_GPI_PIN_ROW_BASE ADP5585_GPI_PIN_ROW0 +#define ADP5585_GPI_PIN_ROW_END ADP5585_GPI_PIN_ROW5 +#define ADP5585_GPI_PIN_COL_BASE ADP5585_GPI_PIN_COL0 +#define ADP5585_GPI_PIN_COL_END ADP5585_GPI_PIN_COL4 + +#define ADP5585_GPI_PIN_BASE ADP5585_GPI_PIN_ROW_BASE +#define ADP5585_GPI_PIN_END ADP5585_GPI_PIN_COL_END + +#define ADP5585_GPIMAPSIZE_MAX (ADP5585_GPI_PIN_END - ADP5585_GPI_PIN_BASE + 1) + struct adp5589_gpi_map { unsigned short pin; unsigned short sw_evt; @@ -159,7 +108,7 @@ struct adp5589_gpi_map { #define RESET2_POL_HIGH (1 << 7) #define RESET2_POL_LOW (0 << 7) -/* Mask Bits: +/* ADP5589 Mask Bits: * C C C C C C C C C C C | R R R R R R R R * 1 9 8 7 6 5 4 3 2 1 0 | 7 6 5 4 3 2 1 0 * 0 @@ -168,18 +117,44 @@ struct adp5589_gpi_map { * 8 7 6 5 4 3 2 1 0 9 8 | 7 6 5 4 3 2 1 0 */ -#define ADP_ROW(x) (1 << (x)) -#define ADP_COL(x) (1 << (x + 8)) +#define ADP_ROW(x) (1 << (x)) +#define ADP_COL(x) (1 << (x + 8)) +#define ADP5589_ROW_MASK 0xFF +#define ADP5589_COL_MASK 0xFF +#define ADP5589_COL_SHIFT 8 +#define ADP5589_MAX_ROW_NUM 7 +#define ADP5589_MAX_COL_NUM 10 + +/* ADP5585 Mask Bits: + * C C C C C | R R R R R R + * 4 3 2 1 0 | 5 4 3 2 1 0 + * + * ---- BIT -- ----------- + * 1 0 0 0 0 | 0 0 0 0 0 0 + * 0 9 8 7 6 | 5 4 3 2 1 0 + */ + +#define ADP5585_ROW_MASK 0x3F +#define ADP5585_COL_MASK 0x1F +#define ADP5585_ROW_SHIFT 0 +#define ADP5585_COL_SHIFT 6 +#define ADP5585_MAX_ROW_NUM 5 +#define ADP5585_MAX_COL_NUM 4 + +#define ADP5585_ROW(x) (1 << ((x) & ADP5585_ROW_MASK)) +#define ADP5585_COL(x) (1 << (((x) & ADP5585_COL_MASK) + ADP5585_COL_SHIFT)) + +/* Put one of these structures in i2c_board_info platform_data */ struct adp5589_kpad_platform_data { unsigned keypad_en_mask; /* Keypad (Rows/Columns) enable mask */ const unsigned short *keymap; /* Pointer to keymap */ unsigned short keymapsize; /* Keymap size */ bool repeat; /* Enable key repeat */ - bool en_keylock; /* Enable key lock feature */ - unsigned char unlock_key1; /* Unlock Key 1 */ - unsigned char unlock_key2; /* Unlock Key 2 */ - unsigned char unlock_timer; /* Time in seconds [0..7] between the two unlock keys 0=disable */ + bool en_keylock; /* Enable key lock feature (ADP5589 only)*/ + unsigned char unlock_key1; /* Unlock Key 1 (ADP5589 only) */ + unsigned char unlock_key2; /* Unlock Key 2 (ADP5589 only) */ + unsigned char unlock_timer; /* Time in seconds [0..7] between the two unlock keys 0=disable (ADP5589 only) */ unsigned char scan_cycle_time; /* Time between consecutive scan cycles */ unsigned char reset_cfg; /* Reset config */ unsigned short reset1_key_1; /* Reset Key 1 */ diff --git a/include/linux/input/adxl34x.h b/include/linux/input/adxl34x.h index df00d998a44..57e01a7cb00 100644 --- a/include/linux/input/adxl34x.h +++ b/include/linux/input/adxl34x.h @@ -30,8 +30,9 @@ struct adxl34x_platform_data { * Y, or Z participation in Tap detection. A '0' excludes the * selected axis from participation in Tap detection. * Setting the SUPPRESS bit suppresses Double Tap detection if - * acceleration greater than tap_threshold is present between - * taps. + * acceleration greater than tap_threshold is present during the + * tap_latency period, i.e. after the first tap but before the + * opening of the second tap window. */ #define ADXL_SUPPRESS (1 << 3) @@ -226,13 +227,13 @@ struct adxl34x_platform_data { * detection will begin and prevent the detection of activity. This * bit serially links the activity and inactivity functions. When '0' * the inactivity and activity functions are concurrent. Additional - * information can be found in the Application section under Link - * Mode. + * information can be found in the ADXL34x datasheet's Application + * section under Link Mode. * AUTO_SLEEP: A '1' sets the ADXL34x to switch to Sleep Mode * when inactivity (acceleration has been below inactivity_threshold * for at least inactivity_time) is detected and the LINK bit is set. - * A '0' disables automatic switching to Sleep Mode. See SLEEP - * for further description. + * A '0' disables automatic switching to Sleep Mode. See the + * Sleep Bit section of the ADXL34x datasheet for more information. */ #define ADXL_LINK (1 << 5) @@ -266,6 +267,12 @@ struct adxl34x_platform_data { u8 watermark; + /* + * When acceleration measurements are received from the ADXL34x + * events are sent to the event subsystem. The following settings + * select the event type and event code for new x, y and z axis data + * respectively. + */ u32 ev_type; /* EV_ABS or EV_REL */ u32 ev_code_x; /* ABS_X,Y,Z or REL_X,Y,Z */ @@ -289,7 +296,7 @@ struct adxl34x_platform_data { u32 ev_code_act_inactivity; /* EV_KEY */ /* - * Use ADXL34x INT2 instead of INT1 + * Use ADXL34x INT2 pin instead of INT1 pin for interrupt output */ u8 use_int2; diff --git a/include/linux/input/auo-pixcir-ts.h b/include/linux/input/auo-pixcir-ts.h new file mode 100644 index 00000000000..75d4be71771 --- /dev/null +++ b/include/linux/input/auo-pixcir-ts.h @@ -0,0 +1,56 @@ +/* + * Driver for AUO in-cell touchscreens + * + * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de> + * + * based on auo_touch.h from Dell Streak kernel + * + * Copyright (c) 2008 QUALCOMM Incorporated. + * Copyright (c) 2008 QUALCOMM USA, INC. + * + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __AUO_PIXCIR_TS_H__ +#define __AUO_PIXCIR_TS_H__ + +/* + * Interrupt modes: + * periodical: interrupt is asserted periodicaly + * compare coordinates: interrupt is asserted when coordinates change + * indicate touch: interrupt is asserted during touch + */ +#define AUO_PIXCIR_INT_PERIODICAL 0x00 +#define AUO_PIXCIR_INT_COMP_COORD 0x01 +#define AUO_PIXCIR_INT_TOUCH_IND 0x02 + +/* + * @gpio_int interrupt gpio + * @int_setting one of AUO_PIXCIR_INT_* + * @init_hw hardwarespecific init + * @exit_hw hardwarespecific shutdown + * @x_max x-resolution + * @y_max y-resolution + */ +struct auo_pixcir_ts_platdata { + int gpio_int; + + int int_setting; + + void (*init_hw)(struct i2c_client *); + void (*exit_hw)(struct i2c_client *); + + unsigned int x_max; + unsigned int y_max; +}; + +#endif diff --git a/include/linux/input/gp2ap002a00f.h b/include/linux/input/gp2ap002a00f.h new file mode 100644 index 00000000000..aad2fd44a61 --- /dev/null +++ b/include/linux/input/gp2ap002a00f.h @@ -0,0 +1,22 @@ +#ifndef _GP2AP002A00F_H_ +#define _GP2AP002A00F_H_ + +#include <linux/i2c.h> + +#define GP2A_I2C_NAME "gp2ap002a00f" + +/** + * struct gp2a_platform_data - Sharp gp2ap002a00f proximity platform data + * @vout_gpio: The gpio connected to the object detected pin (VOUT) + * @wakeup: Set to true if the proximity can wake the device from suspend + * @hw_setup: Callback for setting up hardware such as gpios and vregs + * @hw_shutdown: Callback for properly shutting down hardware + */ +struct gp2a_platform_data { + int vout_gpio; + bool wakeup; + int (*hw_setup)(struct i2c_client *client); + int (*hw_shutdown)(struct i2c_client *client); +}; + +#endif diff --git a/include/linux/input/gpio_tilt.h b/include/linux/input/gpio_tilt.h new file mode 100644 index 00000000000..c1cc52d380e --- /dev/null +++ b/include/linux/input/gpio_tilt.h @@ -0,0 +1,73 @@ +#ifndef _INPUT_GPIO_TILT_H +#define _INPUT_GPIO_TILT_H + +/** + * struct gpio_tilt_axis - Axis used by the tilt switch + * @axis: Constant describing the axis, e.g. ABS_X + * @min: minimum value for abs_param + * @max: maximum value for abs_param + * @fuzz: fuzz value for abs_param + * @flat: flat value for abs_param + */ +struct gpio_tilt_axis { + int axis; + int min; + int max; + int fuzz; + int flat; +}; + +/** + * struct gpio_tilt_state - state description + * @gpios: bitfield of gpio target-states for the value + * @axes: array containing the axes settings for the gpio state + * The array indizes must correspond to the axes defined + * in platform_data + * + * This structure describes a supported axis settings + * and the necessary gpio-state which represent it. + * + * The n-th bit in the bitfield describes the state of the n-th GPIO + * from the gpios-array defined in gpio_regulator_config below. + */ +struct gpio_tilt_state { + int gpios; + int *axes; +}; + +/** + * struct gpio_tilt_platform_data + * @gpios: Array containing the gpios determining the tilt state + * @nr_gpios: Number of gpios + * @axes: Array of gpio_tilt_axis descriptions + * @nr_axes: Number of axes + * @states: Array of gpio_tilt_state entries describing + * the gpio state for specific tilts + * @nr_states: Number of states available + * @debounce_interval: debounce ticks interval in msecs + * @poll_interval: polling interval in msecs - for polling driver only + * @enable: callback to enable the tilt switch + * @disable: callback to disable the tilt switch + * + * This structure contains gpio-tilt-switch configuration + * information that must be passed by platform code to the + * gpio-tilt input driver. + */ +struct gpio_tilt_platform_data { + struct gpio *gpios; + int nr_gpios; + + struct gpio_tilt_axis *axes; + int nr_axes; + + struct gpio_tilt_state *states; + int nr_states; + + int debounce_interval; + + unsigned int poll_interval; + int (*enable)(struct device *dev); + void (*disable)(struct device *dev); +}; + +#endif diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h new file mode 100644 index 00000000000..7163d91c037 --- /dev/null +++ b/include/linux/input/pixcir_ts.h @@ -0,0 +1,10 @@ +#ifndef _PIXCIR_I2C_TS_H +#define _PIXCIR_I2C_TS_H + +struct pixcir_ts_platform_data { + int (*attb_read_val)(void); + int x_max; + int y_max; +}; + +#endif diff --git a/include/linux/input/samsung-keypad.h b/include/linux/input/samsung-keypad.h new file mode 100644 index 00000000000..f25619bfd8a --- /dev/null +++ b/include/linux/input/samsung-keypad.h @@ -0,0 +1,43 @@ +/* + * Samsung Keypad platform data definitions + * + * Copyright (C) 2010 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __SAMSUNG_KEYPAD_H +#define __SAMSUNG_KEYPAD_H + +#include <linux/input/matrix_keypad.h> + +#define SAMSUNG_MAX_ROWS 8 +#define SAMSUNG_MAX_COLS 8 + +/** + * struct samsung_keypad_platdata - Platform device data for Samsung Keypad. + * @keymap_data: pointer to &matrix_keymap_data. + * @rows: number of keypad row supported. + * @cols: number of keypad col supported. + * @no_autorepeat: disable key autorepeat. + * @wakeup: controls whether the device should be set up as wakeup source. + * @cfg_gpio: configure the GPIO. + * + * Initialisation data specific to either the machine or the platform + * for the device driver to use or call-back when configuring gpio. + */ +struct samsung_keypad_platdata { + const struct matrix_keymap_data *keymap_data; + unsigned int rows; + unsigned int cols; + bool no_autorepeat; + bool wakeup; + + void (*cfg_gpio)(unsigned int rows, unsigned int cols); +}; + +#endif /* __SAMSUNG_KEYPAD_H */ diff --git a/include/linux/input/tca8418_keypad.h b/include/linux/input/tca8418_keypad.h new file mode 100644 index 00000000000..e71a85dc2cb --- /dev/null +++ b/include/linux/input/tca8418_keypad.h @@ -0,0 +1,44 @@ +/* + * TCA8418 keypad platform support + * + * Copyright (C) 2011 Fuel7, Inc. All rights reserved. + * + * Author: Kyle Manna <kyle.manna@fuel7.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License v2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the + * Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 021110-1307, USA. + * + * If you can't comply with GPLv2, alternative licensing terms may be + * arranged. Please contact Fuel7, Inc. (http://fuel7.com/) for proprietary + * alternative licensing inquiries. + */ + +#ifndef _TCA8418_KEYPAD_H +#define _TCA8418_KEYPAD_H + +#include <linux/types.h> +#include <linux/input/matrix_keypad.h> + +#define TCA8418_I2C_ADDR 0x34 +#define TCA8418_NAME "tca8418_keypad" + +struct tca8418_keypad_platform_data { + const struct matrix_keymap_data *keymap_data; + unsigned rows; + unsigned cols; + bool rep; + bool irq_is_gpio; +}; + +#endif |