diff options
Diffstat (limited to 'include/linux/nl80211.h')
| -rw-r--r-- | include/linux/nl80211.h | 407 |
1 files changed, 398 insertions, 9 deletions
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 8ad70dcac3f..0f5ff373982 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -161,6 +161,13 @@ * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD, * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes. + * Following attributes are provided for drivers that generate full Beacon + * and Probe Response frames internally: %NL80211_ATTR_SSID, + * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, + * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, + * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, + * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_IE, %NL80211_ATTR_IE_PROBE_RESP, + * %NL80211_ATTR_IE_ASSOC_RESP. * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, * parameters are like for %NL80211_CMD_SET_BEACON. * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it @@ -231,6 +238,8 @@ * * @NL80211_CMD_GET_SCAN: get scan results * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters + * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the + * probe requests at CCK rate or not. * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to * NL80211_CMD_GET_SCAN and on the "scan" multicast group) * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, @@ -425,6 +434,8 @@ * specified using %NL80211_ATTR_DURATION. When called, this operation * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the * TX status event pertaining to the TX request. + * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the + * management frames at CCK rate or not in 2GHz band. * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this * command may be used with the corresponding cookie to cancel the wait * time if it is known that it is no longer necessary. @@ -492,6 +503,44 @@ * this command may also be sent by the driver as an MLME event to * inform userspace of the new replay counter. * + * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace + * of PMKSA caching dandidates. + * + * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). + * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. + * + * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP + * (or GO) interface (i.e. hostapd) to ask for unexpected frames to + * implement sending deauth to stations that send unexpected class 3 + * frames. Also used as the event sent by the kernel when such a frame + * is received. + * For the event, the %NL80211_ATTR_MAC attribute carries the TA and + * other attributes like the interface index are present. + * If used as the command it must have an interface index and you can + * only unsubscribe from the event by closing the socket. Subscription + * is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events. + * + * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the + * associated station identified by %NL80211_ATTR_MAC sent a 4addr frame + * and wasn't already in a 4-addr VLAN. The event will be sent similarly + * to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener. + * + * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface + * by sending a null data frame to it and reporting when the frame is + * acknowleged. This is used to allow timing out inactive clients. Uses + * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a + * direct reply with an %NL80211_ATTR_COOKIE that is later used to match + * up the event with the request. The event includes the same data and + * has %NL80211_ATTR_ACK set if the frame was ACKed. + * + * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from + * other BSSes when any interfaces are in AP mode. This helps implement + * OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME + * messages. Note that per PHY only one application may register. + * + * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether + * No Acknowledgement Policy should be applied. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -616,6 +665,21 @@ enum nl80211_commands { NL80211_CMD_SET_REKEY_OFFLOAD, + NL80211_CMD_PMKSA_CANDIDATE, + + NL80211_CMD_TDLS_OPER, + NL80211_CMD_TDLS_MGMT, + + NL80211_CMD_UNEXPECTED_FRAME, + + NL80211_CMD_PROBE_CLIENT, + + NL80211_CMD_REGISTER_BEACONS, + + NL80211_CMD_UNEXPECTED_4ADDR_FRAME, + + NL80211_CMD_SET_NOACK_MAP, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -636,6 +700,8 @@ enum nl80211_commands { #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE #define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT +#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS + /* source-level API compatibility */ #define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG #define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG @@ -762,6 +828,8 @@ enum nl80211_commands { * that can be added to a scan request * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information * elements that can be added to a scheduled scan request + * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be + * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute. * * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive @@ -842,18 +910,20 @@ enum nl80211_commands { * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT * event (u16) * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating - * that protected APs should be used. + * that protected APs should be used. This is also used with NEW_BEACON to + * indicate that the BSS is to use protection. * - * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT and ASSOCIATE to - * indicate which unicast key ciphers will be used with the connection + * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON + * to indicate which unicast key ciphers will be used with the connection * (an array of u32). - * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT and ASSOCIATE to indicate - * which group key cipher will be used with the connection (a u32). - * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT and ASSOCIATE to indicate - * which WPA version(s) the AP we want to associate with is using + * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which group key cipher will be used with the connection (a + * u32). + * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which WPA version(s) the AP we want to associate with is using * (a u32 with flags from &enum nl80211_wpa_versions). - * @NL80211_ATTR_AKM_SUITES: Used with CONNECT and ASSOCIATE to indicate - * which key management algorithm(s) to use (an array of u32). + * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which key management algorithm(s) to use (an array of u32). * * @NL80211_ATTR_REQ_IE: (Re)association request information elements as * sent out by the card, for ROAM and successful CONNECT events. @@ -1002,6 +1072,24 @@ enum nl80211_commands { * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan * cycles, in msecs. + + * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more + * sets of attributes to match during scheduled scans. Only BSSs + * that match any of the sets will be reported. These are + * pass-thru filter rules. + * For a match to succeed, the BSS must match all attributes of a + * set. Since not every hardware supports matching all types of + * attributes, there is no guarantee that the reported BSSs are + * fully complying with the match sets and userspace needs to be + * able to ignore them by itself. + * Thus, the implementation is somewhat hardware-dependent, but + * this is only an optimization and the userspace application + * needs to handle all the non-filtered results anyway. + * If the match attributes don't make sense when combined with + * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID + * is included in the probe request, but the match attributes + * will never let it go through), -EINVAL may be returned. + * If ommited, no filtering is done. * * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported * interface combinations. In each nested item, it contains attributes @@ -1019,6 +1107,92 @@ enum nl80211_commands { * being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but * without the length restriction (at most %NL80211_MAX_SUPP_RATES). * + * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon + * and Probe Response (when response to wildcard Probe Request); see + * &enum nl80211_hidden_ssid, represented as a u32 + * + * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame. + * This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to + * provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the + * driver (or firmware) replies to Probe Request frames. + * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association + * Response frames. This is used with %NL80211_CMD_NEW_BEACON and + * %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into + * (Re)Association Response frames when the driver (or firmware) replies to + * (Re)Association Request frames. + * + * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration + * of the station, see &enum nl80211_sta_wme_attr. + * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working + * as AP. + * + * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of + * roaming to another AP in the same ESS if the signal lever is low. + * + * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching + * candidate information, see &enum nl80211_pmksa_candidate_attr. + * + * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not + * for management frames transmission. In order to avoid p2p probe/action + * frames are being transmitted at CCK rate in 2GHz band, the user space + * applications use this attribute. + * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and + * %NL80211_CMD_FRAME commands. + * + * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup + * request, link setup confirm, link teardown, etc.). Values are + * described in the TDLS (802.11z) specification. + * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a + * TDLS conversation between two devices. + * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see + * &enum nl80211_tdls_operation, represented as a u8. + * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate + * as a TDLS peer sta. + * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown + * procedures should be performed by sending TDLS packets via + * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be + * used for asking the driver to perform a TDLS operation. + * + * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices + * that have AP support to indicate that they have the AP SME integrated + * with support for the features listed in this attribute, see + * &enum nl80211_ap_sme_features. + * + * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells + * the driver to not wait for an acknowledgement. Note that due to this, + * it will also not give a status callback nor return a cookie. This is + * mostly useful for probe responses to save airtime. + * + * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from + * &enum nl80211_feature_flags and is advertised in wiphy information. + * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe + * + * requests while operating in AP-mode. + * This attribute holds a bitmap of the supported protocols for + * offloading (see &enum nl80211_probe_resp_offload_support_attr). + * + * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire + * probe-response frame. The DA field in the 802.11 header is zero-ed out, + * to be filled by the FW. + * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable + * this feature. Currently, only supported in mac80211 drivers. + * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the + * ATTR_HT_CAPABILITY to which attention should be paid. + * Currently, only mac80211 NICs support this feature. + * The values that may be configured are: + * MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40 + * AMPDU density and AMPDU factor. + * All values are treated as suggestions and may be ignored + * by the driver as required. The actual values may be seen in + * the station debugfs ht_caps file. + * + * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country + * abides to when initiating radiation on DFS channels. A country maps + * to one DFS region. + * + * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of + * up to 16 TIDs. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1224,6 +1398,46 @@ enum nl80211_attrs { NL80211_ATTR_SCAN_SUPP_RATES, + NL80211_ATTR_HIDDEN_SSID, + + NL80211_ATTR_IE_PROBE_RESP, + NL80211_ATTR_IE_ASSOC_RESP, + + NL80211_ATTR_STA_WME, + NL80211_ATTR_SUPPORT_AP_UAPSD, + + NL80211_ATTR_ROAM_SUPPORT, + + NL80211_ATTR_SCHED_SCAN_MATCH, + NL80211_ATTR_MAX_MATCH_SETS, + + NL80211_ATTR_PMKSA_CANDIDATE, + + NL80211_ATTR_TX_NO_CCK_RATE, + + NL80211_ATTR_TDLS_ACTION, + NL80211_ATTR_TDLS_DIALOG_TOKEN, + NL80211_ATTR_TDLS_OPERATION, + NL80211_ATTR_TDLS_SUPPORT, + NL80211_ATTR_TDLS_EXTERNAL_SETUP, + + NL80211_ATTR_DEVICE_AP_SME, + + NL80211_ATTR_DONT_WAIT_FOR_ACK, + + NL80211_ATTR_FEATURE_FLAGS, + + NL80211_ATTR_PROBE_RESP_OFFLOAD, + + NL80211_ATTR_PROBE_RESP, + + NL80211_ATTR_DFS_REGION, + + NL80211_ATTR_DISABLE_HT, + NL80211_ATTR_HT_CAPABILITY_MASK, + + NL80211_ATTR_NOACK_MAP, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1258,6 +1472,7 @@ enum nl80211_attrs { #define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES #define NL80211_ATTR_KEY NL80211_ATTR_KEY #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS +#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS #define NL80211_MAX_SUPP_RATES 32 #define NL80211_MAX_SUPP_REG_RULES 32 @@ -1321,6 +1536,11 @@ enum nl80211_iftype { * @NL80211_STA_FLAG_WME: station is WME/QoS capable * @NL80211_STA_FLAG_MFP: station uses management frame protection * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated + * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should + * only be used in managed mode (even in the flags mask). Note that the + * flag can't be changed, it is only valid while adding a station, and + * attempts to change it will silently be ignored (rather than rejected + * as errors.) * @NL80211_STA_FLAG_MAX: highest station flag number currently defined * @__NL80211_STA_FLAG_AFTER_LAST: internal use */ @@ -1331,6 +1551,7 @@ enum nl80211_sta_flags { NL80211_STA_FLAG_WME, NL80211_STA_FLAG_MFP, NL80211_STA_FLAG_AUTHENTICATED, + NL80211_STA_FLAG_TDLS_PEER, /* keep last */ __NL80211_STA_FLAG_AFTER_LAST, @@ -1433,6 +1654,8 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute * containing info as possible, see &enum nl80211_sta_bss_param * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected + * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. + * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -1454,6 +1677,8 @@ enum nl80211_sta_info { NL80211_STA_INFO_RX_BITRATE, NL80211_STA_INFO_BSS_PARAM, NL80211_STA_INFO_CONNECTED_TIME, + NL80211_STA_INFO_STA_FLAGS, + NL80211_STA_INFO_BEACON_LOSS, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -1683,6 +1908,26 @@ enum nl80211_reg_rule_attr { }; /** + * enum nl80211_sched_scan_match_attr - scheduled scan match attributes + * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, + * only report BSS with matching SSID. + * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter + * attribute number currently defined + * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use + */ +enum nl80211_sched_scan_match_attr { + __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, + + NL80211_ATTR_SCHED_SCAN_MATCH_SSID, + + /* keep last */ + __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, + NL80211_SCHED_SCAN_MATCH_ATTR_MAX = + __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1 +}; + +/** * enum nl80211_reg_rule_flags - regulatory rule flags * * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed @@ -1708,6 +1953,21 @@ enum nl80211_reg_rule_flags { }; /** + * enum nl80211_dfs_regions - regulatory DFS regions + * + * @NL80211_DFS_UNSET: Country has no DFS master region specified + * @NL80211_DFS_FCC_: Country follows DFS master rules from FCC + * @NL80211_DFS_FCC_: Country follows DFS master rules from ETSI + * @NL80211_DFS_JP_: Country follows DFS master rules from JP/MKK/Telec + */ +enum nl80211_dfs_regions { + NL80211_DFS_UNSET = 0, + NL80211_DFS_FCC = 1, + NL80211_DFS_ETSI = 2, + NL80211_DFS_JP = 3, +}; + +/** * enum nl80211_survey_info - survey information * * These attribute types are used with %NL80211_ATTR_SURVEY_INFO @@ -1833,6 +2093,17 @@ enum nl80211_mntr_flags { * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a * source mesh point for path selection elements. * + * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between + * root announcements are transmitted. + * + * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has + * access to a broader network beyond the MBSS. This is done via Root + * Announcement frames. + * + * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in + * TUs) during which a mesh STA can send only one Action frame containing a + * PERR element. + * * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use @@ -1854,6 +2125,9 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, NL80211_MESHCONF_HWMP_ROOTMODE, NL80211_MESHCONF_ELEMENT_TTL, + NL80211_MESHCONF_HWMP_RANN_INTERVAL, + NL80211_MESHCONF_GATE_ANNOUNCEMENTS, + NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, @@ -2430,4 +2704,119 @@ enum nl80211_rekey_data { MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1 }; +/** + * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID + * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in + * Beacon frames) + * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element + * in Beacon frames + * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID + * element in Beacon frames but zero out each byte in the SSID + */ +enum nl80211_hidden_ssid { + NL80211_HIDDEN_SSID_NOT_IN_USE, + NL80211_HIDDEN_SSID_ZERO_LEN, + NL80211_HIDDEN_SSID_ZERO_CONTENTS +}; + +/** + * enum nl80211_sta_wme_attr - station WME attributes + * @__NL80211_STA_WME_INVALID: invalid number for nested attribute + * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format + * is the same as the AC bitmap in the QoS info field. + * @NL80211_STA_WME_MAX_SP: max service period. the format is the same + * as the MAX_SP field in the QoS info field (but already shifted down). + * @__NL80211_STA_WME_AFTER_LAST: internal + * @NL80211_STA_WME_MAX: highest station WME attribute + */ +enum nl80211_sta_wme_attr { + __NL80211_STA_WME_INVALID, + NL80211_STA_WME_UAPSD_QUEUES, + NL80211_STA_WME_MAX_SP, + + /* keep last */ + __NL80211_STA_WME_AFTER_LAST, + NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1 +}; + +/** + * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates + * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes + * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher + * priority) + * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets) + * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag) + * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes + * (internal) + * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute + * (internal) + */ +enum nl80211_pmksa_candidate_attr { + __NL80211_PMKSA_CANDIDATE_INVALID, + NL80211_PMKSA_CANDIDATE_INDEX, + NL80211_PMKSA_CANDIDATE_BSSID, + NL80211_PMKSA_CANDIDATE_PREAUTH, + + /* keep last */ + NUM_NL80211_PMKSA_CANDIDATE, + MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1 +}; + +/** + * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION + * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request + * @NL80211_TDLS_SETUP: Setup TDLS link + * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established + * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link + * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link + */ +enum nl80211_tdls_operation { + NL80211_TDLS_DISCOVERY_REQ, + NL80211_TDLS_SETUP, + NL80211_TDLS_TEARDOWN, + NL80211_TDLS_ENABLE_LINK, + NL80211_TDLS_DISABLE_LINK, +}; + +/* + * enum nl80211_ap_sme_features - device-integrated AP features + * Reserved for future use, no bits are defined in + * NL80211_ATTR_DEVICE_AP_SME yet. +enum nl80211_ap_sme_features { +}; + */ + +/** + * enum nl80211_feature_flags - device/driver features + * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back + * TX status to the socket error queue when requested with the + * socket option. + * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates. + */ +enum nl80211_feature_flags { + NL80211_FEATURE_SK_TX_STATUS = 1 << 0, + NL80211_FEATURE_HT_IBSS = 1 << 1, +}; + +/** + * enum nl80211_probe_resp_offload_support_attr - optional supported + * protocols for probe-response offloading by the driver/FW. + * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute. + * Each enum value represents a bit in the bitmap of supported + * protocols. Typically a subset of probe-requests belonging to a + * supported protocol will be excluded from offload and uploaded + * to the host. + * + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1 + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2 + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u + */ +enum nl80211_probe_resp_offload_support_attr { + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS = 1<<0, + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 = 1<<1, + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P = 1<<2, + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3, +}; + #endif /* __LINUX_NL80211_H */ |