diff options
Diffstat (limited to 'include/linux/pinctrl/machine.h')
| -rw-r--r-- | include/linux/pinctrl/machine.h | 99 |
1 files changed, 99 insertions, 0 deletions
diff --git a/include/linux/pinctrl/machine.h b/include/linux/pinctrl/machine.h new file mode 100644 index 00000000000..d0aecb7f6fb --- /dev/null +++ b/include/linux/pinctrl/machine.h @@ -0,0 +1,99 @@ +/* + * Machine interface for the pinctrl subsystem. + * + * Copyright (C) 2011 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * Based on bits of regulator core, gpio core and clk core + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef __LINUX_PINMUX_MACHINE_H +#define __LINUX_PINMUX_MACHINE_H + +/** + * struct pinmux_map - boards/machines shall provide this map for devices + * @name: the name of this specific map entry for the particular machine. + * This is the second parameter passed to pinmux_get() when you want + * to have several mappings to the same device + * @ctrl_dev: the pin control device to be used by this mapping, may be NULL + * if you provide .ctrl_dev_name instead (this is more common) + * @ctrl_dev_name: the name of the device controlling this specific mapping, + * the name must be the same as in your struct device*, may be NULL if + * you provide .ctrl_dev instead + * @function: a function in the driver to use for this mapping, the driver + * will lookup the function referenced by this ID on the specified + * pin control device + * @group: sometimes a function can map to different pin groups, so this + * selects a certain specific pin group to activate for the function, if + * left as NULL, the first applicable group will be used + * @dev: the device using this specific mapping, may be NULL if you provide + * .dev_name instead (this is more common) + * @dev_name: the name of the device using this specific mapping, the name + * must be the same as in your struct device*, may be NULL if you + * provide .dev instead + * @hog_on_boot: if this is set to true, the pin control subsystem will itself + * hog the mappings as the pinmux device drivers are attached, so this is + * typically used with system maps (mux mappings without an assigned + * device) that you want to get hogged and enabled by default as soon as + * a pinmux device supporting it is registered. These maps will not be + * disabled and put until the system shuts down. + */ +struct pinmux_map { + const char *name; + struct device *ctrl_dev; + const char *ctrl_dev_name; + const char *function; + const char *group; + struct device *dev; + const char *dev_name; + bool hog_on_boot; +}; + +/* + * Convenience macro to set a simple map from a certain pin controller and a + * certain function to a named device + */ +#define PINMUX_MAP(a, b, c, d) \ + { .name = a, .ctrl_dev_name = b, .function = c, .dev_name = d } + +/* + * Convenience macro to map a system function onto a certain pinctrl device. + * System functions are not assigned to a particular device. + */ +#define PINMUX_MAP_SYS(a, b, c) \ + { .name = a, .ctrl_dev_name = b, .function = c } + +/* + * Convenience macro to map a system function onto a certain pinctrl device, + * to be hogged by the pinmux core until the system shuts down. + */ +#define PINMUX_MAP_SYS_HOG(a, b, c) \ + { .name = a, .ctrl_dev_name = b, .function = c, \ + .hog_on_boot = true } + +/* + * Convenience macro to map a system function onto a certain pinctrl device + * using a specified group, to be hogged by the pinmux core until the system + * shuts down. + */ +#define PINMUX_MAP_SYS_HOG_GROUP(a, b, c, d) \ + { .name = a, .ctrl_dev_name = b, .function = c, .group = d, \ + .hog_on_boot = true } + +#ifdef CONFIG_PINMUX + +extern int pinmux_register_mappings(struct pinmux_map const *map, + unsigned num_maps); + +#else + +static inline int pinmux_register_mappings(struct pinmux_map const *map, + unsigned num_maps) +{ + return 0; +} + +#endif /* !CONFIG_PINMUX */ +#endif |