aboutsummaryrefslogtreecommitdiff
path: root/include/net/mac80211.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/net/mac80211.h')
-rw-r--r--include/net/mac80211.h64
1 files changed, 54 insertions, 10 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 72eddd1b410..d49928ba5d0 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -166,6 +166,7 @@ struct ieee80211_low_level_stats {
* that it is only ever disabled for station mode.
* @BSS_CHANGED_IDLE: Idle changed for this BSS/interface.
* @BSS_CHANGED_SSID: SSID changed for this BSS (AP mode)
+ * @BSS_CHANGED_AP_PROBE_RESP: Probe Response changed for this BSS (AP mode)
*/
enum ieee80211_bss_change {
BSS_CHANGED_ASSOC = 1<<0,
@@ -184,6 +185,7 @@ enum ieee80211_bss_change {
BSS_CHANGED_QOS = 1<<13,
BSS_CHANGED_IDLE = 1<<14,
BSS_CHANGED_SSID = 1<<15,
+ BSS_CHANGED_AP_PROBE_RESP = 1<<16,
/* when adding here, make sure to change ieee80211_reconfig */
};
@@ -518,7 +520,7 @@ struct ieee80211_tx_rate {
* @flags: transmit info flags, defined above
* @band: the band to transmit on (use for checking for races)
* @antenna_sel_tx: antenna to use, 0 for automatic diversity
- * @pad: padding, ignore
+ * @ack_frame_id: internal frame ID for TX status, used internally
* @control: union for control data
* @status: union for status data
* @driver_data: array of driver_data pointers
@@ -535,8 +537,7 @@ struct ieee80211_tx_info {
u8 antenna_sel_tx;
- /* 2 byte hole */
- u8 pad[2];
+ u16 ack_frame_id;
union {
struct {
@@ -901,6 +902,10 @@ static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
* @IEEE80211_KEY_FLAG_SW_MGMT: This flag should be set by the driver for a
* CCMP key if it requires CCMP encryption of management frames (MFP) to
* be done in software.
+ * @IEEE80211_KEY_FLAG_PUT_IV_SPACE: This flag should be set by the driver
+ * for a CCMP key if space should be prepared for the IV, but the IV
+ * itself should not be generated. Do not set together with
+ * @IEEE80211_KEY_FLAG_GENERATE_IV on the same key.
*/
enum ieee80211_key_flags {
IEEE80211_KEY_FLAG_WMM_STA = 1<<0,
@@ -908,6 +913,7 @@ enum ieee80211_key_flags {
IEEE80211_KEY_FLAG_GENERATE_MMIC= 1<<2,
IEEE80211_KEY_FLAG_PAIRWISE = 1<<3,
IEEE80211_KEY_FLAG_SW_MGMT = 1<<4,
+ IEEE80211_KEY_FLAG_PUT_IV_SPACE = 1<<5,
};
/**
@@ -1304,6 +1310,16 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
}
/**
+ * ieee80211_free_txskb - free TX skb
+ * @hw: the hardware
+ * @skb: the skb
+ *
+ * Free a transmit skb. Use this funtion when some failure
+ * to transmit happened and thus status cannot be reported.
+ */
+void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
+
+/**
* DOC: Hardware crypto acceleration
*
* mac80211 is capable of taking advantage of many hardware
@@ -1423,7 +1439,7 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
* DOC: Beacon filter support
*
* Some hardware have beacon filter support to reduce host cpu wakeups
- * which will reduce system power consumption. It usuallly works so that
+ * which will reduce system power consumption. It usually works so that
* the firmware creates a checksum of the beacon but omits all constantly
* changing elements (TSF, TIM etc). Whenever the checksum changes the
* beacon is forwarded to the host, otherwise it will be just dropped. That
@@ -1744,11 +1760,21 @@ enum ieee80211_frame_release_type {
* skb contains the buffer starting from the IEEE 802.11 header.
* The low-level driver should send the frame out based on
* configuration in the TX control data. This handler should,
- * preferably, never fail and stop queues appropriately, more
- * importantly, however, it must never fail for A-MPDU-queues.
- * This function should return NETDEV_TX_OK except in very
- * limited cases.
- * Must be implemented and atomic.
+ * preferably, never fail and stop queues appropriately.
+ * This must be implemented if @tx_frags is not.
+ * Must be atomic.
+ *
+ * @tx_frags: Called to transmit multiple fragments of a single MSDU.
+ * This handler must consume all fragments, sending out some of
+ * them only is useless and it can't ask for some of them to be
+ * queued again. If the frame is not fragmented the queue has a
+ * single SKB only. To avoid issues with the networking stack
+ * when TX status is reported the frames should be removed from
+ * the skb queue.
+ * If this is used, the tx_info @vif and @sta pointers will be
+ * invalid -- you must not use them in that case.
+ * This must be implemented if @tx isn't.
+ * Must be atomic.
*
* @start: Called before the first netdevice attached to the hardware
* is enabled. This should turn on the hardware and must turn on
@@ -2085,6 +2111,8 @@ enum ieee80211_frame_release_type {
*/
struct ieee80211_ops {
void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
+ void (*tx_frags)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta, struct sk_buff_head *skbs);
int (*start)(struct ieee80211_hw *hw);
void (*stop)(struct ieee80211_hw *hw);
#ifdef CONFIG_PM
@@ -2661,6 +2689,19 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
}
/**
+ * ieee80211_proberesp_get - retrieve a Probe Response template
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Creates a Probe Response template which can, for example, be uploaded to
+ * hardware. The destination address should be set by the caller.
+ *
+ * Can only be called in AP mode.
+ */
+struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif);
+
+/**
* ieee80211_pspoll_get - retrieve a PS Poll template
* @hw: pointer obtained from ieee80211_alloc_hw().
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
@@ -3461,9 +3502,12 @@ void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn);
*
* @IEEE80211_RC_HT_CHANGED: The HT parameters of the operating channel have
* changed, rate control algorithm can update its internal state if needed.
+ * @IEEE80211_RC_SMPS_CHANGED: The SMPS state of the station changed, the rate
+ * control algorithm needs to adjust accordingly.
*/
enum rate_control_changed {
- IEEE80211_RC_HT_CHANGED = BIT(0)
+ IEEE80211_RC_HT_CHANGED = BIT(0),
+ IEEE80211_RC_SMPS_CHANGED = BIT(1),
};
/**