aboutsummaryrefslogtreecommitdiff
path: root/sound/oss/opl3sa2.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/oss/opl3sa2.c')
-rw-r--r--sound/oss/opl3sa2.c1129
1 files changed, 1129 insertions, 0 deletions
diff --git a/sound/oss/opl3sa2.c b/sound/oss/opl3sa2.c
new file mode 100644
index 00000000000..7b4996e7157
--- /dev/null
+++ b/sound/oss/opl3sa2.c
@@ -0,0 +1,1129 @@
+/*
+ * sound/opl3sa2.c
+ *
+ * A low level driver for Yamaha OPL3-SA2 and SA3 cards.
+ * NOTE: All traces of the name OPL3-SAx have now (December 2000) been
+ * removed from the driver code, as an email exchange with Yamaha
+ * provided the information that the YMF-719 is indeed just a
+ * re-badged 715.
+ *
+ * Copyright 1998-2001 Scott Murray <scott@spiteful.org>
+ *
+ * Originally based on the CS4232 driver (in cs4232.c) by Hannu Savolainen
+ * and others. Now incorporates code/ideas from pss.c, also by Hannu
+ * Savolainen. Both of those files are distributed with the following
+ * license:
+ *
+ * "Copyright (C) by Hannu Savolainen 1993-1997
+ *
+ * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
+ * Version 2 (June 1991). See the "COPYING" file distributed with this software
+ * for more info."
+ *
+ * As such, in accordance with the above license, this file, opl3sa2.c, is
+ * distributed under the GNU GENERAL PUBLIC LICENSE (GPL) Version 2 (June 1991).
+ * See the "COPYING" file distributed with this software for more information.
+ *
+ * Change History
+ * --------------
+ * Scott Murray Original driver (Jun 14, 1998)
+ * Paul J.Y. Lahaie Changed probing / attach code order
+ * Scott Murray Added mixer support (Dec 03, 1998)
+ * Scott Murray Changed detection code to be more forgiving,
+ * added force option as last resort,
+ * fixed ioctl return values. (Dec 30, 1998)
+ * Scott Murray Simpler detection code should work all the time now
+ * (with thanks to Ben Hutchings for the heuristic),
+ * removed now unnecessary force option. (Jan 5, 1999)
+ * Christoph Hellwig Adapted to module_init/module_exit (Mar 4, 2000)
+ * Scott Murray Reworked SA2 versus SA3 mixer code, updated chipset
+ * version detection code (again!). (Dec 5, 2000)
+ * Scott Murray Adjusted master volume mixer scaling. (Dec 6, 2000)
+ * Scott Murray Based on a patch by Joel Yliluoma (aka Bisqwit),
+ * integrated wide mixer and adjusted mic, bass, treble
+ * scaling. (Dec 6, 2000)
+ * Scott Murray Based on a patch by Peter Englmaier, integrated
+ * ymode and loopback options. (Dec 6, 2000)
+ * Scott Murray Inspired by a patch by Peter Englmaier, and based on
+ * what ALSA does, added initialization code for the
+ * default DMA and IRQ settings. (Dec 6, 2000)
+ * Scott Murray Added some more checks to the card detection code,
+ * based on what ALSA does. (Dec 12, 2000)
+ * Scott Murray Inspired by similar patches from John Fremlin,
+ * Jim Radford, Mike Rolig, and Ingmar Steen, added 2.4
+ * ISA PnP API support, mainly based on bits from
+ * sb_card.c and awe_wave.c. (Dec 12, 2000)
+ * Scott Murray Some small cleanups to the init code output.
+ * (Jan 7, 2001)
+ * Zwane Mwaikambo Added PM support. (Dec 4 2001)
+ *
+ * Adam Belay Converted driver to new PnP Layer (Oct 12, 2002)
+ * Zwane Mwaikambo Code, data structure cleanups. (Feb 15 2002)
+ * Zwane Mwaikambo Free resources during auxiliary device probe
+ * failures (Apr 29 2002)
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/pnp.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include "sound_config.h"
+
+#include "ad1848.h"
+#include "mpu401.h"
+
+#define OPL3SA2_MODULE_NAME "opl3sa2"
+#define PFX OPL3SA2_MODULE_NAME ": "
+
+/* Useful control port indexes: */
+#define OPL3SA2_PM 0x01
+#define OPL3SA2_SYS_CTRL 0x02
+#define OPL3SA2_IRQ_CONFIG 0x03
+#define OPL3SA2_DMA_CONFIG 0x06
+#define OPL3SA2_MASTER_LEFT 0x07
+#define OPL3SA2_MASTER_RIGHT 0x08
+#define OPL3SA2_MIC 0x09
+#define OPL3SA2_MISC 0x0A
+
+#define OPL3SA3_WIDE 0x14
+#define OPL3SA3_BASS 0x15
+#define OPL3SA3_TREBLE 0x16
+
+/* Useful constants: */
+#define DEFAULT_VOLUME 50
+#define DEFAULT_MIC 50
+#define DEFAULT_TIMBRE 0
+
+/* Power saving modes */
+#define OPL3SA2_PM_MODE0 0x00
+#define OPL3SA2_PM_MODE1 0x04 /* PSV */
+#define OPL3SA2_PM_MODE2 0x05 /* PSV | PDX */
+#define OPL3SA2_PM_MODE3 0x27 /* ADOWN | PSV | PDN | PDX */
+
+
+/* For checking against what the card returns: */
+#define VERSION_UNKNOWN 0
+#define VERSION_YMF711 1
+#define VERSION_YMF715 2
+#define VERSION_YMF715B 3
+#define VERSION_YMF715E 4
+/* also assuming that anything > 4 but <= 7 is a 715E */
+
+/* Chipset type constants for use below */
+#define CHIPSET_UNKNOWN -1
+#define CHIPSET_OPL3SA2 0
+#define CHIPSET_OPL3SA3 1
+static const char *CHIPSET_TABLE[] = {"OPL3-SA2", "OPL3-SA3"};
+
+#ifdef CONFIG_PNP
+#define OPL3SA2_CARDS_MAX 4
+#else
+#define OPL3SA2_CARDS_MAX 1
+#endif
+
+/* This should be pretty obvious */
+static int opl3sa2_cards_num;
+
+typedef struct {
+ /* device resources */
+ unsigned short cfg_port;
+ struct address_info cfg;
+ struct address_info cfg_mss;
+ struct address_info cfg_mpu;
+#ifdef CONFIG_PNP
+ /* PnP Stuff */
+ struct pnp_dev* pdev;
+ int activated; /* Whether said devices have been activated */
+#endif
+#ifdef CONFIG_PM
+ unsigned int in_suspend;
+ struct pm_dev *pmdev;
+#endif
+ unsigned int card;
+ int chipset; /* What's my version(s)? */
+ char *chipset_name;
+
+ /* mixer data */
+ int mixer;
+ unsigned int volume_l;
+ unsigned int volume_r;
+ unsigned int mic;
+ unsigned int bass_l;
+ unsigned int bass_r;
+ unsigned int treble_l;
+ unsigned int treble_r;
+ unsigned int wide_l;
+ unsigned int wide_r;
+} opl3sa2_state_t;
+static opl3sa2_state_t opl3sa2_state[OPL3SA2_CARDS_MAX];
+
+
+
+/* Our parameters */
+static int __initdata io = -1;
+static int __initdata mss_io = -1;
+static int __initdata mpu_io = -1;
+static int __initdata irq = -1;
+static int __initdata dma = -1;
+static int __initdata dma2 = -1;
+static int __initdata ymode = -1;
+static int __initdata loopback = -1;
+
+#ifdef CONFIG_PNP
+/* PnP specific parameters */
+static int __initdata isapnp = 1;
+static int __initdata multiple = 1;
+
+/* Whether said devices have been activated */
+static int opl3sa2_activated[OPL3SA2_CARDS_MAX];
+#else
+static int __initdata isapnp; /* = 0 */
+static int __initdata multiple; /* = 0 */
+#endif
+
+MODULE_DESCRIPTION("Module for OPL3-SA2 and SA3 sound cards (uses AD1848 MSS driver).");
+MODULE_AUTHOR("Scott Murray <scott@spiteful.org>");
+MODULE_LICENSE("GPL");
+
+
+module_param(io, int, 0);
+MODULE_PARM_DESC(io, "Set I/O base of OPL3-SA2 or SA3 card (usually 0x370. Address must be even and must be from 0x100 to 0xFFE)");
+
+module_param(mss_io, int, 0);
+MODULE_PARM_DESC(mss_io, "Set MSS (audio) I/O base (0x530, 0xE80, or other. Address must end in 0 or 4 and must be from 0x530 to 0xF48)");
+
+module_param(mpu_io, int, 0);
+MODULE_PARM_DESC(mpu_io, "Set MIDI I/O base (0x330 or other. Address must be even and must be from 0x300 to 0x334)");
+
+module_param(irq, int, 0);
+MODULE_PARM_DESC(mss_irq, "Set MSS (audio) IRQ (5, 7, 9, 10, 11, 12)");
+
+module_param(dma, int, 0);
+MODULE_PARM_DESC(dma, "Set MSS (audio) first DMA channel (0, 1, 3)");
+
+module_param(dma2, int, 0);
+MODULE_PARM_DESC(dma2, "Set MSS (audio) second DMA channel (0, 1, 3)");
+
+module_param(ymode, int, 0);
+MODULE_PARM_DESC(ymode, "Set Yamaha 3D enhancement mode (0 = Desktop/Normal, 1 = Notebook PC (1), 2 = Notebook PC (2), 3 = Hi-Fi)");
+
+module_param(loopback, int, 0);
+MODULE_PARM_DESC(loopback, "Set A/D input source. Useful for echo cancellation (0 = Mic Rch (default), 1 = Mono output loopback)");
+
+#ifdef CONFIG_PNP
+module_param(isapnp, bool, 0);
+MODULE_PARM_DESC(isapnp, "When set to 0, ISA PnP support will be disabled");
+
+module_param(multiple, bool, 0);
+MODULE_PARM_DESC(multiple, "When set to 0, will not search for multiple cards");
+#endif
+
+
+/*
+ * Standard read and write functions
+*/
+
+static inline void opl3sa2_write(unsigned short port,
+ unsigned char index,
+ unsigned char data)
+{
+ outb_p(index, port);
+ outb(data, port + 1);
+}
+
+
+static inline void opl3sa2_read(unsigned short port,
+ unsigned char index,
+ unsigned char* data)
+{
+ outb_p(index, port);
+ *data = inb(port + 1);
+}
+
+
+/*
+ * All of the mixer functions...
+ */
+
+static void opl3sa2_set_volume(opl3sa2_state_t* devc, int left, int right)
+{
+ static unsigned char scale[101] = {
+ 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0e, 0x0e, 0x0e,
+ 0x0e, 0x0e, 0x0e, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0c,
+ 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0b, 0x0b, 0x0b, 0x0b,
+ 0x0b, 0x0b, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x09, 0x09,
+ 0x09, 0x09, 0x09, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x08,
+ 0x08, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x06, 0x06, 0x06,
+ 0x06, 0x06, 0x06, 0x06, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x03,
+ 0x03, 0x03, 0x03, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x01,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00
+ };
+ unsigned char vol;
+
+ vol = scale[left];
+
+ /* If level is zero, turn on mute */
+ if(!left)
+ vol |= 0x80;
+
+ opl3sa2_write(devc->cfg_port, OPL3SA2_MASTER_LEFT, vol);
+
+ vol = scale[right];
+
+ /* If level is zero, turn on mute */
+ if(!right)
+ vol |= 0x80;
+
+ opl3sa2_write(devc->cfg_port, OPL3SA2_MASTER_RIGHT, vol);
+}
+
+
+static void opl3sa2_set_mic(opl3sa2_state_t* devc, int level)
+{
+ unsigned char vol = 0x1F;
+
+ if((level >= 0) && (level <= 100))
+ vol = 0x1F - (unsigned char) (32 * level / 101);
+
+ /* If level is zero, turn on mute */
+ if(!level)
+ vol |= 0x80;
+
+ opl3sa2_write(devc->cfg_port, OPL3SA2_MIC, vol);
+}
+
+
+static void opl3sa3_set_bass(opl3sa2_state_t* devc, int left, int right)
+{
+ unsigned char bass;
+
+ bass = left ? ((unsigned char) (8 * left / 101)) : 0;
+ bass |= (right ? ((unsigned char) (8 * right / 101)) : 0) << 4;
+
+ opl3sa2_write(devc->cfg_port, OPL3SA3_BASS, bass);
+}
+
+
+static void opl3sa3_set_treble(opl3sa2_state_t* devc, int left, int right)
+{
+ unsigned char treble;
+
+ treble = left ? ((unsigned char) (8 * left / 101)) : 0;
+ treble |= (right ? ((unsigned char) (8 * right / 101)) : 0) << 4;
+
+ opl3sa2_write(devc->cfg_port, OPL3SA3_TREBLE, treble);
+}
+
+
+
+
+static void opl3sa2_mixer_reset(opl3sa2_state_t* devc)
+{
+ if (devc) {
+ opl3sa2_set_volume(devc, DEFAULT_VOLUME, DEFAULT_VOLUME);
+ devc->volume_l = devc->volume_r = DEFAULT_VOLUME;
+
+ opl3sa2_set_mic(devc, DEFAULT_MIC);
+ devc->mic = DEFAULT_MIC;
+
+ if (devc->chipset == CHIPSET_OPL3SA3) {
+ opl3sa3_set_bass(devc, DEFAULT_TIMBRE, DEFAULT_TIMBRE);
+ devc->bass_l = devc->bass_r = DEFAULT_TIMBRE;
+ opl3sa3_set_treble(devc, DEFAULT_TIMBRE, DEFAULT_TIMBRE);
+ devc->treble_l = devc->treble_r = DEFAULT_TIMBRE;
+ }
+ }
+}
+
+/* Currently only used for power management */
+#ifdef CONFIG_PM
+static void opl3sa2_mixer_restore(opl3sa2_state_t* devc)
+{
+ if (devc) {
+ opl3sa2_set_volume(devc, devc->volume_l, devc->volume_r);
+ opl3sa2_set_mic(devc, devc->mic);
+
+ if (devc->chipset == CHIPSET_OPL3SA3) {
+ opl3sa3_set_bass(devc, devc->bass_l, devc->bass_r);
+ opl3sa3_set_treble(devc, devc->treble_l, devc->treble_r);
+ }
+ }
+}
+#endif
+
+static inline void arg_to_vol_mono(unsigned int vol, int* value)
+{
+ int left;
+
+ left = vol & 0x00ff;
+ if (left > 100)
+ left = 100;
+ *value = left;
+}
+
+
+static inline void arg_to_vol_stereo(unsigned int vol, int* aleft, int* aright)
+{
+ arg_to_vol_mono(vol, aleft);
+ arg_to_vol_mono(vol >> 8, aright);
+}
+
+
+static inline int ret_vol_mono(int vol)
+{
+ return ((vol << 8) | vol);
+}
+
+
+static inline int ret_vol_stereo(int left, int right)
+{
+ return ((right << 8) | left);
+}
+
+
+static int opl3sa2_mixer_ioctl(int dev, unsigned int cmd, void __user *arg)
+{
+ int retval, value, cmdf = cmd & 0xff;
+ int __user *p = (int __user *)arg;
+
+ opl3sa2_state_t* devc = &opl3sa2_state[dev];
+
+ switch (cmdf) {
+ case SOUND_MIXER_VOLUME:
+ case SOUND_MIXER_MIC:
+ case SOUND_MIXER_DEVMASK:
+ case SOUND_MIXER_STEREODEVS:
+ case SOUND_MIXER_RECMASK:
+ case SOUND_MIXER_RECSRC:
+ case SOUND_MIXER_CAPS:
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ if (((cmd >> 8) & 0xff) != 'M')
+ return -EINVAL;
+
+ retval = 0;
+ if (_SIOC_DIR (cmd) & _SIOC_WRITE) {
+ switch (cmdf) {
+ case SOUND_MIXER_VOLUME:
+ retval = get_user(value, (unsigned __user *) arg);
+ if (retval)
+ break;
+ arg_to_vol_stereo(value, &devc->volume_l, &devc->volume_r);
+ opl3sa2_set_volume(devc, devc->volume_l, devc->volume_r);
+ value = ret_vol_stereo(devc->volume_l, devc->volume_r);
+ retval = put_user(value, p);
+ break;
+
+ case SOUND_MIXER_MIC:
+ retval = get_user(value, (unsigned __user *) arg);
+ if (retval)
+ break;
+ arg_to_vol_mono(value, &devc->mic);
+ opl3sa2_set_mic(devc, devc->mic);
+ value = ret_vol_mono(devc->mic);
+ retval = put_user(value, p);
+ break;
+
+ default:
+ retval = -EINVAL;
+ }
+ }
+ else {
+ /*
+ * Return parameters
+ */
+ switch (cmdf) {
+ case SOUND_MIXER_DEVMASK:
+ retval = put_user(SOUND_MASK_VOLUME | SOUND_MASK_MIC, p);
+ break;
+
+ case SOUND_MIXER_STEREODEVS:
+ retval = put_user(SOUND_MASK_VOLUME, p);
+ break;
+
+ case SOUND_MIXER_RECMASK:
+ /* No recording devices */
+ retval = put_user(0, p);
+ break;
+
+ case SOUND_MIXER_CAPS:
+ retval = put_user(SOUND_CAP_EXCL_INPUT, p);
+ break;
+
+ case SOUND_MIXER_RECSRC:
+ /* No recording source */
+ retval = put_user(0, p);
+ break;
+
+ case SOUND_MIXER_VOLUME:
+ value = ret_vol_stereo(devc->volume_l, devc->volume_r);
+ retval = put_user(value, p);
+ break;
+
+ case SOUND_MIXER_MIC:
+ value = ret_vol_mono(devc->mic);
+ put_user(value, p);
+ break;
+
+ default:
+ retval = -EINVAL;
+ }
+ }
+ return retval;
+}
+/* opl3sa2_mixer_ioctl end */
+
+
+static int opl3sa3_mixer_ioctl(int dev, unsigned int cmd, void __user * arg)
+{
+ int value, retval, cmdf = cmd & 0xff;
+
+ opl3sa2_state_t* devc = &opl3sa2_state[dev];
+
+ switch (cmdf) {
+ case SOUND_MIXER_BASS:
+ value = ret_vol_stereo(devc->bass_l, devc->bass_r);
+ retval = put_user(value, (int __user *) arg);
+ break;
+
+ case SOUND_MIXER_TREBLE:
+ value = ret_vol_stereo(devc->treble_l, devc->treble_r);
+ retval = put_user(value, (int __user *) arg);
+ break;
+
+ case SOUND_MIXER_DIGITAL1:
+ value = ret_vol_stereo(devc->wide_l, devc->wide_r);
+ retval = put_user(value, (int __user *) arg);
+ break;
+
+ default:
+ retval = -EINVAL;
+ }
+ return retval;
+}
+/* opl3sa3_mixer_ioctl end */
+
+
+static struct mixer_operations opl3sa2_mixer_operations =
+{
+ .owner = THIS_MODULE,
+ .id = "OPL3-SA2",
+ .name = "Yamaha OPL3-SA2",
+ .ioctl = opl3sa2_mixer_ioctl
+};
+
+static struct mixer_operations opl3sa3_mixer_operations =
+{
+ .owner = THIS_MODULE,
+ .id = "OPL3-SA3",
+ .name = "Yamaha OPL3-SA3",
+ .ioctl = opl3sa3_mixer_ioctl
+};
+
+/* End of mixer-related stuff */
+
+
+/*
+ * Component probe, attach, unload functions
+ */
+
+static inline void __exit unload_opl3sa2_mpu(struct address_info *hw_config)
+{
+ unload_mpu401(hw_config);
+}
+
+
+static void __init attach_opl3sa2_mss(struct address_info* hw_config, struct resource *ports)
+{
+ int initial_mixers;
+
+ initial_mixers = num_mixers;
+ attach_ms_sound(hw_config, ports, THIS_MODULE); /* Slot 0 */
+ if (hw_config->slots[0] != -1) {
+ /* Did the MSS driver install? */
+ if(num_mixers == (initial_mixers + 1)) {
+ /* The MSS mixer is installed, reroute mixers appropiately */
+ AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_CD);
+ AD1848_REROUTE(SOUND_MIXER_LINE2, SOUND_MIXER_SYNTH);
+ AD1848_REROUTE(SOUND_MIXER_LINE3, SOUND_MIXER_LINE);
+ }
+ else {
+ printk(KERN_ERR PFX "MSS mixer not installed?\n");
+ }
+ }
+}
+
+
+static inline void __exit unload_opl3sa2_mss(struct address_info* hw_config)
+{
+ unload_ms_sound(hw_config);
+}
+
+
+static int __init probe_opl3sa2(struct address_info* hw_config, int card)
+{
+ unsigned char misc;
+ unsigned char tmp;
+ unsigned char version;
+
+ /*
+ * Try and allocate our I/O port range.
+ */
+ if (!request_region(hw_config->io_base, 2, OPL3SA2_MODULE_NAME)) {
+ printk(KERN_ERR PFX "Control I/O port %#x not free\n",
+ hw_config->io_base);
+ goto out_nodev;
+ }
+
+ /*
+ * Check if writing to the read-only version bits of the miscellaneous
+ * register succeeds or not (it should not).
+ */
+ opl3sa2_read(hw_config->io_base, OPL3SA2_MISC, &misc);
+ opl3sa2_write(hw_config->io_base, OPL3SA2_MISC, misc ^ 0x07);
+ opl3sa2_read(hw_config->io_base, OPL3SA2_MISC, &tmp);
+ if(tmp != misc) {
+ printk(KERN_ERR PFX "Control I/O port %#x is not a YMF7xx chipset!\n",
+ hw_config->io_base);
+ goto out_region;
+ }
+
+ /*
+ * Check if the MIC register is accessible.
+ */
+ opl3sa2_read(hw_config->io_base, OPL3SA2_MIC, &tmp);
+ opl3sa2_write(hw_config->io_base, OPL3SA2_MIC, 0x8a);
+ opl3sa2_read(hw_config->io_base, OPL3SA2_MIC, &tmp);
+ if((tmp & 0x9f) != 0x8a) {
+ printk(KERN_ERR
+ PFX "Control I/O port %#x is not a YMF7xx chipset!\n",
+ hw_config->io_base);
+ goto out_region;
+ }
+ opl3sa2_write(hw_config->io_base, OPL3SA2_MIC, tmp);
+
+ /*
+ * Determine chipset type (SA2 or SA3)
+ *
+ * This is done by looking at the chipset version in the lower 3 bits
+ * of the miscellaneous register.
+ */
+ version = misc & 0x07;
+ printk(KERN_DEBUG PFX "Chipset version = %#x\n", version);
+ switch (version) {
+ case 0:
+ opl3sa2_state[card].chipset = CHIPSET_UNKNOWN;
+ printk(KERN_ERR
+ PFX "Unknown Yamaha audio controller version\n");
+ break;
+
+ case VERSION_YMF711:
+ opl3sa2_state[card].chipset = CHIPSET_OPL3SA2;
+ printk(KERN_INFO PFX "Found OPL3-SA2 (YMF711)\n");
+ break;
+
+ case VERSION_YMF715:
+ opl3sa2_state[card].chipset = CHIPSET_OPL3SA3;
+ printk(KERN_INFO
+ PFX "Found OPL3-SA3 (YMF715 or YMF719)\n");
+ break;
+
+ case VERSION_YMF715B:
+ opl3sa2_state[card].chipset = CHIPSET_OPL3SA3;
+ printk(KERN_INFO
+ PFX "Found OPL3-SA3 (YMF715B or YMF719B)\n");
+ break;
+
+ case VERSION_YMF715E:
+ default:
+ opl3sa2_state[card].chipset = CHIPSET_OPL3SA3;
+ printk(KERN_INFO
+ PFX "Found OPL3-SA3 (YMF715E or YMF719E)\n");
+ break;
+ }
+
+ if (opl3sa2_state[card].chipset != CHIPSET_UNKNOWN) {
+ /* Generate a pretty name */
+ opl3sa2_state[card].chipset_name = (char *)CHIPSET_TABLE[opl3sa2_state[card].chipset];
+ return 0;
+ }
+
+out_region:
+ release_region(hw_config->io_base, 2);
+out_nodev:
+ return -ENODEV;
+}
+
+
+static void __init attach_opl3sa2(struct address_info* hw_config, int card)
+{
+ /* Initialize IRQ configuration to IRQ-B: -, IRQ-A: WSS+MPU+OPL3 */
+ opl3sa2_write(hw_config->io_base, OPL3SA2_IRQ_CONFIG, 0x0d);
+
+ /* Initialize DMA configuration */
+ if(hw_config->dma2 == hw_config->dma) {
+ /* Want DMA configuration DMA-B: -, DMA-A: WSS-P+WSS-R */
+ opl3sa2_write(hw_config->io_base, OPL3SA2_DMA_CONFIG, 0x03);
+ }
+ else {
+ /* Want DMA configuration DMA-B: WSS-R, DMA-A: WSS-P */
+ opl3sa2_write(hw_config->io_base, OPL3SA2_DMA_CONFIG, 0x21);
+ }
+}
+
+
+static void __init attach_opl3sa2_mixer(struct address_info *hw_config, int card)
+{
+ struct mixer_operations* mixer_operations;
+ opl3sa2_state_t* devc = &opl3sa2_state[card];
+
+ /* Install master mixer */
+ if (devc->chipset == CHIPSET_OPL3SA3) {
+ mixer_operations = &opl3sa3_mixer_operations;
+ }
+ else {
+ mixer_operations = &opl3sa2_mixer_operations;
+ }
+
+ devc->cfg_port = hw_config->io_base;
+ devc->mixer = sound_install_mixer(MIXER_DRIVER_VERSION,
+ mixer_operations->name,
+ mixer_operations,
+ sizeof(struct mixer_operations),
+ devc);
+ if(devc->mixer < 0) {
+ printk(KERN_ERR PFX "Could not install %s master mixer\n",
+ mixer_operations->name);
+ }
+ else {
+ opl3sa2_mixer_reset(devc);
+
+ }
+}
+
+
+static void opl3sa2_clear_slots(struct address_info* hw_config)
+{
+ int i;
+
+ for(i = 0; i < 6; i++) {
+ hw_config->slots[i] = -1;
+ }
+}
+
+
+static void __init opl3sa2_set_ymode(struct address_info* hw_config, int ymode)
+{
+ /*
+ * Set the Yamaha 3D enhancement mode (aka Ymersion) if asked to and
+ * it's supported.
+ *
+ * 0: Desktop (aka normal) 5-12 cm speakers
+ * 1: Notebook PC mode 1 3 cm speakers
+ * 2: Notebook PC mode 2 1.5 cm speakers
+ * 3: Hi-fi 16-38 cm speakers
+ */
+ if(ymode >= 0 && ymode <= 3) {
+ unsigned char sys_ctrl;
+
+ opl3sa2_read(hw_config->io_base, OPL3SA2_SYS_CTRL, &sys_ctrl);
+ sys_ctrl = (sys_ctrl & 0xcf) | ((ymode & 3) << 4);
+ opl3sa2_write(hw_config->io_base, OPL3SA2_SYS_CTRL, sys_ctrl);
+ }
+ else {
+ printk(KERN_ERR PFX "not setting ymode, it must be one of 0,1,2,3\n");
+ }
+}
+
+
+static void __init opl3sa2_set_loopback(struct address_info* hw_config, int loopback)
+{
+ if(loopback >= 0 && loopback <= 1) {
+ unsigned char misc;
+
+ opl3sa2_read(hw_config->io_base, OPL3SA2_MISC, &misc);
+ misc = (misc & 0xef) | ((loopback & 1) << 4);
+ opl3sa2_write(hw_config->io_base, OPL3SA2_MISC, misc);
+ }
+ else {
+ printk(KERN_ERR PFX "not setting loopback, it must be either 0 or 1\n");
+ }
+}
+
+
+static void __exit unload_opl3sa2(struct address_info* hw_config, int card)
+{
+ /* Release control ports */
+ release_region(hw_config->io_base, 2);
+
+ /* Unload mixer */
+ if(opl3sa2_state[card].mixer >= 0)
+ sound_unload_mixerdev(opl3sa2_state[card].mixer);
+
+}
+
+#ifdef CONFIG_PNP
+static struct pnp_device_id pnp_opl3sa2_list[] = {
+ {.id = "YMH0021", .driver_data = 0},
+ {.id = ""}
+};
+
+MODULE_DEVICE_TABLE(pnp, pnp_opl3sa2_list);
+
+static int opl3sa2_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
+{
+ int card = opl3sa2_cards_num;
+
+ /* we don't actually want to return an error as the user may have specified
+ * no multiple card search
+ */
+
+ if (opl3sa2_cards_num == OPL3SA2_CARDS_MAX)
+ return 0;
+ opl3sa2_activated[card] = 1;
+
+ /* Our own config: */
+ opl3sa2_state[card].cfg.io_base = pnp_port_start(dev, 4);
+ opl3sa2_state[card].cfg.irq = pnp_irq(dev, 0);
+ opl3sa2_state[card].cfg.dma = pnp_dma(dev, 0);
+ opl3sa2_state[card].cfg.dma2 = pnp_dma(dev, 1);
+
+ /* The MSS config: */
+ opl3sa2_state[card].cfg_mss.io_base = pnp_port_start(dev, 1);
+ opl3sa2_state[card].cfg_mss.irq = pnp_irq(dev, 0);
+ opl3sa2_state[card].cfg_mss.dma = pnp_dma(dev, 0);
+ opl3sa2_state[card].cfg_mss.dma2 = pnp_dma(dev, 1);
+ opl3sa2_state[card].cfg_mss.card_subtype = 1; /* No IRQ or DMA setup */
+
+ opl3sa2_state[card].cfg_mpu.io_base = pnp_port_start(dev, 3);
+ opl3sa2_state[card].cfg_mpu.irq = pnp_irq(dev, 0);
+ opl3sa2_state[card].cfg_mpu.dma = -1;
+ opl3sa2_state[card].cfg_mpu.dma2 = -1;
+ opl3sa2_state[card].cfg_mpu.always_detect = 1; /* It's there, so use shared IRQs */
+
+ /* Call me paranoid: */
+ opl3sa2_clear_slots(&opl3sa2_state[card].cfg);
+ opl3sa2_clear_slots(&opl3sa2_state[card].cfg_mss);
+ opl3sa2_clear_slots(&opl3sa2_state[card].cfg_mpu);
+
+ opl3sa2_state[card].pdev = dev;
+ opl3sa2_cards_num++;
+
+ return 0;
+}
+
+static struct pnp_driver opl3sa2_driver = {
+ .name = "opl3sa2",
+ .id_table = pnp_opl3sa2_list,
+ .probe = opl3sa2_pnp_probe,
+};
+
+#endif /* CONFIG_PNP */
+
+/* End of component functions */
+
+#ifdef CONFIG_PM
+static DEFINE_SPINLOCK(opl3sa2_lock);
+
+/* Power Management support functions */
+static int opl3sa2_suspend(struct pm_dev *pdev, unsigned int pm_mode)
+{
+ unsigned long flags;
+ opl3sa2_state_t *p;
+
+ if (!pdev)
+ return -EINVAL;
+
+ spin_lock_irqsave(&opl3sa2_lock,flags);
+
+ p = (opl3sa2_state_t *) pdev->data;
+ switch (pm_mode) {
+ case 1:
+ pm_mode = OPL3SA2_PM_MODE1;
+ break;
+ case 2:
+ pm_mode = OPL3SA2_PM_MODE2;
+ break;
+ case 3:
+ pm_mode = OPL3SA2_PM_MODE3;
+ break;
+ default:
+ /* we don't know howto handle this... */
+ spin_unlock_irqrestore(&opl3sa2_lock, flags);
+ return -EBUSY;
+ }
+
+ p->in_suspend = 1;
+
+ /* its supposed to automute before suspending, so we won't bother */
+ opl3sa2_write(p->cfg_port, OPL3SA2_PM, pm_mode);
+ /* wait a while for the clock oscillator to stabilise */
+ mdelay(10);
+
+ spin_unlock_irqrestore(&opl3sa2_lock,flags);
+ return 0;
+}
+
+static int opl3sa2_resume(struct pm_dev *pdev)
+{
+ unsigned long flags;
+ opl3sa2_state_t *p;
+
+ if (!pdev)
+ return -EINVAL;
+
+ p = (opl3sa2_state_t *) pdev->data;
+ spin_lock_irqsave(&opl3sa2_lock,flags);
+
+ /* I don't think this is necessary */
+ opl3sa2_write(p->cfg_port, OPL3SA2_PM, OPL3SA2_PM_MODE0);
+ opl3sa2_mixer_restore(p);
+ p->in_suspend = 0;
+
+ spin_unlock_irqrestore(&opl3sa2_lock,flags);
+ return 0;
+}
+
+static int opl3sa2_pm_callback(struct pm_dev *pdev, pm_request_t rqst, void *data)
+{
+ unsigned long mode = (unsigned long)data;
+
+ switch (rqst) {
+ case PM_SUSPEND:
+ return opl3sa2_suspend(pdev, mode);
+
+ case PM_RESUME:
+ return opl3sa2_resume(pdev);
+ }
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+/*
+ * Install OPL3-SA2 based card(s).
+ *
+ * Need to have ad1848 and mpu401 loaded ready.
+ */
+static int __init init_opl3sa2(void)
+{
+ int card, max;
+
+ /* Sanitize isapnp and multiple settings */
+ isapnp = isapnp != 0 ? 1 : 0;
+ multiple = multiple != 0 ? 1 : 0;
+
+ max = (multiple && isapnp) ? OPL3SA2_CARDS_MAX : 1;
+
+#ifdef CONFIG_PNP
+ if (isapnp){
+ pnp_register_driver(&opl3sa2_driver);
+ if(!opl3sa2_cards_num){
+ printk(KERN_INFO PFX "No PnP cards found\n");
+ isapnp = 0;
+ }
+ max = opl3sa2_cards_num;
+ }
+#endif
+
+ for (card = 0; card < max; card++) {
+ /* If a user wants an I/O then assume they meant it */
+ struct resource *ports;
+ int base;
+
+ if (!isapnp) {
+ if (io == -1 || irq == -1 || dma == -1 ||
+ dma2 == -1 || mss_io == -1) {
+ printk(KERN_ERR
+ PFX "io, mss_io, irq, dma, and dma2 must be set\n");
+ return -EINVAL;
+ }
+ opl3sa2_cards_num++;
+
+ /*
+ * Our own config:
+ * (NOTE: IRQ and DMA aren't used, so they're set to
+ * give pretty output from conf_printf. :)
+ */
+ opl3sa2_state[card].cfg.io_base = io;
+ opl3sa2_state[card].cfg.irq = irq;
+ opl3sa2_state[card].cfg.dma = dma;
+ opl3sa2_state[card].cfg.dma2 = dma2;
+
+ /* The MSS config: */
+ opl3sa2_state[card].cfg_mss.io_base = mss_io;
+ opl3sa2_state[card].cfg_mss.irq = irq;
+ opl3sa2_state[card].cfg_mss.dma = dma;
+ opl3sa2_state[card].cfg_mss.dma2 = dma2;
+ opl3sa2_state[card].cfg_mss.card_subtype = 1; /* No IRQ or DMA setup */
+
+ opl3sa2_state[card].cfg_mpu.io_base = mpu_io;
+ opl3sa2_state[card].cfg_mpu.irq = irq;
+ opl3sa2_state[card].cfg_mpu.dma = -1;
+ opl3sa2_state[card].cfg_mpu.always_detect = 1; /* Use shared IRQs */
+
+ /* Call me paranoid: */
+ opl3sa2_clear_slots(&opl3sa2_state[card].cfg);
+ opl3sa2_clear_slots(&opl3sa2_state[card].cfg_mss);
+ opl3sa2_clear_slots(&opl3sa2_state[card].cfg_mpu);
+ }
+
+ /* FIXME: leak */
+ if (probe_opl3sa2(&opl3sa2_state[card].cfg, card))
+ return -ENODEV;
+
+ base = opl3sa2_state[card].cfg_mss.io_base;
+
+ if (!request_region(base, 4, "WSS config"))
+ goto failed;
+
+ ports = request_region(base + 4, 4, "ad1848");
+ if (!ports)
+ goto failed2;
+
+ if (!probe_ms_sound(&opl3sa2_state[card].cfg_mss, ports)) {
+ /*
+ * If one or more cards are already registered, don't
+ * return an error but print a warning. Note, this
+ * should never really happen unless the hardware or
+ * ISA PnP screwed up.
+ */
+ release_region(base + 4, 4);
+ failed2:
+ release_region(base, 4);
+ failed:
+ release_region(opl3sa2_state[card].cfg.io_base, 2);
+
+ if (opl3sa2_cards_num) {
+ printk(KERN_WARNING
+ PFX "There was a problem probing one "
+ " of the ISA PNP cards, continuing\n");
+ opl3sa2_cards_num--;
+ continue;
+ } else
+ return -ENODEV;
+ }
+
+ attach_opl3sa2(&opl3sa2_state[card].cfg, card);
+ conf_printf(opl3sa2_state[card].chipset_name, &opl3sa2_state[card].cfg);
+ attach_opl3sa2_mixer(&opl3sa2_state[card].cfg, card);
+ attach_opl3sa2_mss(&opl3sa2_state[card].cfg_mss, ports);
+
+ /* ewww =) */
+ opl3sa2_state[card].card = card;
+#ifdef CONFIG_PM
+ /* register our power management capabilities */
+ opl3sa2_state[card].pmdev = pm_register(PM_ISA_DEV, card, opl3sa2_pm_callback);
+ if (opl3sa2_state[card].pmdev)
+ opl3sa2_state[card].pmdev->data = &opl3sa2_state[card];
+#endif /* CONFIG_PM */
+
+ /*
+ * Set the Yamaha 3D enhancement mode (aka Ymersion) if asked to and
+ * it's supported.
+ */
+ if (ymode != -1) {
+ if (opl3sa2_state[card].chipset == CHIPSET_OPL3SA2) {
+ printk(KERN_ERR
+ PFX "ymode not supported on OPL3-SA2\n");
+ }
+ else {
+ opl3sa2_set_ymode(&opl3sa2_state[card].cfg, ymode);
+ }
+ }
+
+
+ /* Set A/D input to Mono loopback if asked to. */
+ if (loopback != -1) {
+ opl3sa2_set_loopback(&opl3sa2_state[card].cfg, loopback);
+ }
+
+ /* Attach MPU if we've been asked to do so, failure isn't fatal */
+ if (opl3sa2_state[card].cfg_mpu.io_base != -1) {
+ int base = opl3sa2_state[card].cfg_mpu.io_base;
+ struct resource *ports;
+ ports = request_region(base, 2, "mpu401");
+ if (!ports)
+ goto out;
+ if (!probe_mpu401(&opl3sa2_state[card].cfg_mpu, ports)) {
+ release_region(base, 2);
+ goto out;
+ }
+ if (attach_mpu401(&opl3sa2_state[card].cfg_mpu, THIS_MODULE)) {
+ printk(KERN_ERR PFX "failed to attach MPU401\n");
+ opl3sa2_state[card].cfg_mpu.slots[1] = -1;
+ }
+ }
+ }
+
+out:
+ if (isapnp) {
+ printk(KERN_NOTICE PFX "%d PnP card(s) found.\n", opl3sa2_cards_num);
+ }
+
+ return 0;
+}
+
+
+/*
+ * Uninstall OPL3-SA2 based card(s).
+ */
+static void __exit cleanup_opl3sa2(void)
+{
+ int card;
+
+ for(card = 0; card < opl3sa2_cards_num; card++) {
+#ifdef CONFIG_PM
+ if (opl3sa2_state[card].pmdev)
+ pm_unregister(opl3sa2_state[card].pmdev);
+#endif
+ if (opl3sa2_state[card].cfg_mpu.slots[1] != -1) {
+ unload_opl3sa2_mpu(&opl3sa2_state[card].cfg_mpu);
+ }
+ unload_opl3sa2_mss(&opl3sa2_state[card].cfg_mss);
+ unload_opl3sa2(&opl3sa2_state[card].cfg, card);
+#ifdef CONFIG_PNP
+ pnp_unregister_driver(&opl3sa2_driver);
+#endif
+ }
+}
+
+module_init(init_opl3sa2);
+module_exit(cleanup_opl3sa2);
+
+#ifndef MODULE
+static int __init setup_opl3sa2(char *str)
+{
+ /* io, irq, dma, dma2,... */
+#ifdef CONFIG_PNP
+ int ints[11];
+#else
+ int ints[9];
+#endif
+ str = get_options(str, ARRAY_SIZE(ints), ints);
+
+ io = ints[1];
+ irq = ints[2];
+ dma = ints[3];
+ dma2 = ints[4];
+ mss_io = ints[5];
+ mpu_io = ints[6];
+ ymode = ints[7];
+ loopback = ints[8];
+#ifdef CONFIG_PNP
+ isapnp = ints[9];
+ multiple = ints[10];
+#endif
+ return 1;
+}
+
+__setup("opl3sa2=", setup_opl3sa2);
+#endif