aboutsummaryrefslogtreecommitdiff
path: root/tools
diff options
context:
space:
mode:
Diffstat (limited to 'tools')
-rw-r--r--tools/Makefile19
-rw-r--r--tools/cgroup/.gitignore1
-rw-r--r--tools/cgroup/Makefile11
-rw-r--r--tools/cgroup/cgroup_event_listener.c82
-rw-r--r--tools/hv/hv_kvp_daemon.c79
-rwxr-xr-xtools/hv/hv_set_ifconfig.sh24
-rw-r--r--tools/lguest/lguest.txt8
-rw-r--r--tools/perf/perf.h12
-rw-r--r--tools/perf/util/evlist.c3
-rw-r--r--tools/power/acpi/Makefile2
-rw-r--r--tools/power/x86/turbostat/turbostat.836
-rw-r--r--tools/power/x86/turbostat/turbostat.c48
-rw-r--r--tools/testing/ktest/examples/include/patchcheck.conf37
-rwxr-xr-xtools/testing/ktest/ktest.pl190
-rw-r--r--tools/testing/ktest/sample.conf44
-rw-r--r--tools/testing/selftests/Makefile8
-rw-r--r--tools/testing/selftests/README.txt42
-rw-r--r--tools/testing/selftests/efivarfs/Makefile12
-rw-r--r--tools/testing/selftests/efivarfs/create-read.c38
-rw-r--r--tools/testing/selftests/efivarfs/efivarfs.sh198
-rw-r--r--tools/testing/selftests/efivarfs/open-unlink.c63
-rw-r--r--tools/usb/ffs-test.c2
-rw-r--r--tools/usb/testusb.c31
23 files changed, 851 insertions, 139 deletions
diff --git a/tools/Makefile b/tools/Makefile
index 798fa0ef048..fa36565b209 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -3,6 +3,7 @@ include scripts/Makefile.include
help:
@echo 'Possible targets:'
@echo ''
+ @echo ' cgroup - cgroup tools'
@echo ' cpupower - a tool for all things x86 CPU power'
@echo ' firewire - the userspace part of nosy, an IEEE-1394 traffic sniffer'
@echo ' lguest - a minimal 32-bit x86 hypervisor'
@@ -33,7 +34,7 @@ help:
cpupower: FORCE
$(call descend,power/$@)
-firewire lguest perf usb virtio vm: FORCE
+cgroup firewire lguest perf usb virtio vm: FORCE
$(call descend,$@)
selftests: FORCE
@@ -45,7 +46,7 @@ turbostat x86_energy_perf_policy: FORCE
cpupower_install:
$(call descend,power/$(@:_install=),install)
-firewire_install lguest_install perf_install usb_install virtio_install vm_install:
+cgroup_install firewire_install lguest_install perf_install usb_install virtio_install vm_install:
$(call descend,$(@:_install=),install)
selftests_install:
@@ -54,14 +55,14 @@ selftests_install:
turbostat_install x86_energy_perf_policy_install:
$(call descend,power/x86/$(@:_install=),install)
-install: cpupower_install firewire_install lguest_install perf_install \
- selftests_install turbostat_install usb_install virtio_install \
- vm_install x86_energy_perf_policy_install
+install: cgroup_install cpupower_install firewire_install lguest_install \
+ perf_install selftests_install turbostat_install usb_install \
+ virtio_install vm_install x86_energy_perf_policy_install
cpupower_clean:
$(call descend,power/cpupower,clean)
-firewire_clean lguest_clean perf_clean usb_clean virtio_clean vm_clean:
+cgroup_clean firewire_clean lguest_clean perf_clean usb_clean virtio_clean vm_clean:
$(call descend,$(@:_clean=),clean)
selftests_clean:
@@ -70,8 +71,8 @@ selftests_clean:
turbostat_clean x86_energy_perf_policy_clean:
$(call descend,power/x86/$(@:_clean=),clean)
-clean: cpupower_clean firewire_clean lguest_clean perf_clean selftests_clean \
- turbostat_clean usb_clean virtio_clean vm_clean \
- x86_energy_perf_policy_clean
+clean: cgroup_clean cpupower_clean firewire_clean lguest_clean perf_clean \
+ selftests_clean turbostat_clean usb_clean virtio_clean \
+ vm_clean x86_energy_perf_policy_clean
.PHONY: FORCE
diff --git a/tools/cgroup/.gitignore b/tools/cgroup/.gitignore
new file mode 100644
index 00000000000..633cd9b874f
--- /dev/null
+++ b/tools/cgroup/.gitignore
@@ -0,0 +1 @@
+cgroup_event_listener
diff --git a/tools/cgroup/Makefile b/tools/cgroup/Makefile
new file mode 100644
index 00000000000..b4286196b76
--- /dev/null
+++ b/tools/cgroup/Makefile
@@ -0,0 +1,11 @@
+# Makefile for cgroup tools
+
+CC = $(CROSS_COMPILE)gcc
+CFLAGS = -Wall -Wextra
+
+all: cgroup_event_listener
+%: %.c
+ $(CC) $(CFLAGS) -o $@ $^
+
+clean:
+ $(RM) cgroup_event_listener
diff --git a/tools/cgroup/cgroup_event_listener.c b/tools/cgroup/cgroup_event_listener.c
new file mode 100644
index 00000000000..4eb5507205c
--- /dev/null
+++ b/tools/cgroup/cgroup_event_listener.c
@@ -0,0 +1,82 @@
+/*
+ * cgroup_event_listener.c - Simple listener of cgroup events
+ *
+ * Copyright (C) Kirill A. Shutemov <kirill@shutemov.name>
+ */
+
+#include <assert.h>
+#include <err.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <libgen.h>
+#include <limits.h>
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+
+#include <sys/eventfd.h>
+
+#define USAGE_STR "Usage: cgroup_event_listener <path-to-control-file> <args>"
+
+int main(int argc, char **argv)
+{
+ int efd = -1;
+ int cfd = -1;
+ int event_control = -1;
+ char event_control_path[PATH_MAX];
+ char line[LINE_MAX];
+ int ret;
+
+ if (argc != 3)
+ errx(1, "%s", USAGE_STR);
+
+ cfd = open(argv[1], O_RDONLY);
+ if (cfd == -1)
+ err(1, "Cannot open %s", argv[1]);
+
+ ret = snprintf(event_control_path, PATH_MAX, "%s/cgroup.event_control",
+ dirname(argv[1]));
+ if (ret >= PATH_MAX)
+ errx(1, "Path to cgroup.event_control is too long");
+
+ event_control = open(event_control_path, O_WRONLY);
+ if (event_control == -1)
+ err(1, "Cannot open %s", event_control_path);
+
+ efd = eventfd(0, 0);
+ if (efd == -1)
+ err(1, "eventfd() failed");
+
+ ret = snprintf(line, LINE_MAX, "%d %d %s", efd, cfd, argv[2]);
+ if (ret >= LINE_MAX)
+ errx(1, "Arguments string is too long");
+
+ ret = write(event_control, line, strlen(line) + 1);
+ if (ret == -1)
+ err(1, "Cannot write to cgroup.event_control");
+
+ while (1) {
+ uint64_t result;
+
+ ret = read(efd, &result, sizeof(result));
+ if (ret == -1) {
+ if (errno == EINTR)
+ continue;
+ err(1, "Cannot read from eventfd");
+ }
+ assert(ret == sizeof(result));
+
+ ret = access(event_control_path, W_OK);
+ if ((ret == -1) && (errno == ENOENT)) {
+ puts("The cgroup seems to have removed.");
+ break;
+ }
+
+ if (ret == -1)
+ err(1, "cgroup.event_control is not accessible any more");
+
+ printf("%s %s: crossed\n", argv[1], argv[2]);
+ }
+
+ return 0;
+}
diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c
index d25a46925e6..c800ea4c8bf 100644
--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -97,7 +97,7 @@ static struct utsname uts_buf;
* The location of the interface configuration file.
*/
-#define KVP_CONFIG_LOC "/var/opt/"
+#define KVP_CONFIG_LOC "/var/lib/hyperv"
#define MAX_FILE_NAME 100
#define ENTRIES_PER_BLOCK 50
@@ -151,7 +151,7 @@ static void kvp_update_file(int pool)
*/
kvp_acquire_lock(pool);
- filep = fopen(kvp_file_info[pool].fname, "w");
+ filep = fopen(kvp_file_info[pool].fname, "we");
if (!filep) {
kvp_release_lock(pool);
syslog(LOG_ERR, "Failed to open file, pool: %d", pool);
@@ -182,7 +182,7 @@ static void kvp_update_mem_state(int pool)
kvp_acquire_lock(pool);
- filep = fopen(kvp_file_info[pool].fname, "r");
+ filep = fopen(kvp_file_info[pool].fname, "re");
if (!filep) {
kvp_release_lock(pool);
syslog(LOG_ERR, "Failed to open file, pool: %d", pool);
@@ -234,9 +234,9 @@ static int kvp_file_init(void)
int i;
int alloc_unit = sizeof(struct kvp_record) * ENTRIES_PER_BLOCK;
- if (access("/var/opt/hyperv", F_OK)) {
- if (mkdir("/var/opt/hyperv", S_IRUSR | S_IWUSR | S_IROTH)) {
- syslog(LOG_ERR, " Failed to create /var/opt/hyperv");
+ if (access(KVP_CONFIG_LOC, F_OK)) {
+ if (mkdir(KVP_CONFIG_LOC, 0755 /* rwxr-xr-x */)) {
+ syslog(LOG_ERR, " Failed to create %s", KVP_CONFIG_LOC);
exit(EXIT_FAILURE);
}
}
@@ -245,14 +245,14 @@ static int kvp_file_init(void)
fname = kvp_file_info[i].fname;
records_read = 0;
num_blocks = 1;
- sprintf(fname, "/var/opt/hyperv/.kvp_pool_%d", i);
- fd = open(fname, O_RDWR | O_CREAT, S_IRUSR | S_IWUSR | S_IROTH);
+ sprintf(fname, "%s/.kvp_pool_%d", KVP_CONFIG_LOC, i);
+ fd = open(fname, O_RDWR | O_CREAT | O_CLOEXEC, 0644 /* rw-r--r-- */);
if (fd == -1)
return 1;
- filep = fopen(fname, "r");
+ filep = fopen(fname, "re");
if (!filep)
return 1;
@@ -1162,16 +1162,13 @@ static int process_ip_string(FILE *f, char *ip_string, int type)
snprintf(str, sizeof(str), "%s", "DNS");
break;
}
- if (i != 0) {
- if (type != DNS) {
- snprintf(sub_str, sizeof(sub_str),
- "_%d", i++);
- } else {
- snprintf(sub_str, sizeof(sub_str),
- "%d", ++i);
- }
- } else if (type == DNS) {
+
+ if (type == DNS) {
snprintf(sub_str, sizeof(sub_str), "%d", ++i);
+ } else if (type == GATEWAY && i == 0) {
+ ++i;
+ } else {
+ snprintf(sub_str, sizeof(sub_str), "%d", i++);
}
@@ -1191,17 +1188,13 @@ static int process_ip_string(FILE *f, char *ip_string, int type)
snprintf(str, sizeof(str), "%s", "DNS");
break;
}
- if ((j != 0) || (type == DNS)) {
- if (type != DNS) {
- snprintf(sub_str, sizeof(sub_str),
- "_%d", j++);
- } else {
- snprintf(sub_str, sizeof(sub_str),
- "%d", ++i);
- }
- } else if (type == DNS) {
- snprintf(sub_str, sizeof(sub_str),
- "%d", ++i);
+
+ if (type == DNS) {
+ snprintf(sub_str, sizeof(sub_str), "%d", ++i);
+ } else if (j == 0) {
+ ++j;
+ } else {
+ snprintf(sub_str, sizeof(sub_str), "_%d", j++);
}
} else {
return HV_INVALIDARG;
@@ -1244,18 +1237,19 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val)
* Here is the format of the ip configuration file:
*
* HWADDR=macaddr
- * IF_NAME=interface name
- * DHCP=yes (This is optional; if yes, DHCP is configured)
+ * DEVICE=interface name
+ * BOOTPROTO=<protocol> (where <protocol> is "dhcp" if DHCP is configured
+ * or "none" if no boot-time protocol should be used)
*
- * IPADDR=ipaddr1
- * IPADDR_1=ipaddr2
- * IPADDR_x=ipaddry (where y = x + 1)
+ * IPADDR0=ipaddr1
+ * IPADDR1=ipaddr2
+ * IPADDRx=ipaddry (where y = x + 1)
*
- * NETMASK=netmask1
- * NETMASK_x=netmasky (where y = x + 1)
+ * NETMASK0=netmask1
+ * NETMASKx=netmasky (where y = x + 1)
*
* GATEWAY=ipaddr1
- * GATEWAY_x=ipaddry (where y = x + 1)
+ * GATEWAYx=ipaddry (where y = x + 1)
*
* DNSx=ipaddrx (where first DNS address is tagged as DNS1 etc)
*
@@ -1271,7 +1265,7 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val)
*/
snprintf(if_file, sizeof(if_file), "%s%s%s", KVP_CONFIG_LOC,
- "hyperv/ifcfg-", if_name);
+ "/ifcfg-", if_name);
file = fopen(if_file, "w");
@@ -1294,12 +1288,12 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val)
if (error)
goto setval_error;
- error = kvp_write_file(file, "IF_NAME", "", if_name);
+ error = kvp_write_file(file, "DEVICE", "", if_name);
if (error)
goto setval_error;
if (new_val->dhcp_enabled) {
- error = kvp_write_file(file, "DHCP", "", "yes");
+ error = kvp_write_file(file, "BOOTPROTO", "", "dhcp");
if (error)
goto setval_error;
@@ -1307,6 +1301,11 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val)
* We are done!.
*/
goto setval_done;
+
+ } else {
+ error = kvp_write_file(file, "BOOTPROTO", "", "none");
+ if (error)
+ goto setval_error;
}
/*
diff --git a/tools/hv/hv_set_ifconfig.sh b/tools/hv/hv_set_ifconfig.sh
index 3e9427e08d8..735aafd64a3 100755
--- a/tools/hv/hv_set_ifconfig.sh
+++ b/tools/hv/hv_set_ifconfig.sh
@@ -20,18 +20,19 @@
# Here is the format of the ip configuration file:
#
# HWADDR=macaddr
-# IF_NAME=interface name
-# DHCP=yes (This is optional; if yes, DHCP is configured)
+# DEVICE=interface name
+# BOOTPROTO=<protocol> (where <protocol> is "dhcp" if DHCP is configured
+# or "none" if no boot-time protocol should be used)
#
-# IPADDR=ipaddr1
-# IPADDR_1=ipaddr2
-# IPADDR_x=ipaddry (where y = x + 1)
+# IPADDR0=ipaddr1
+# IPADDR1=ipaddr2
+# IPADDRx=ipaddry (where y = x + 1)
#
-# NETMASK=netmask1
-# NETMASK_x=netmasky (where y = x + 1)
+# NETMASK0=netmask1
+# NETMASKx=netmasky (where y = x + 1)
#
# GATEWAY=ipaddr1
-# GATEWAY_x=ipaddry (where y = x + 1)
+# GATEWAYx=ipaddry (where y = x + 1)
#
# DNSx=ipaddrx (where first DNS address is tagged as DNS1 etc)
#
@@ -53,11 +54,6 @@ echo "NM_CONTROLLED=no" >> $1
echo "PEERDNS=yes" >> $1
echo "ONBOOT=yes" >> $1
-dhcp=$(grep "DHCP" $1 2>/dev/null)
-if [ "$dhcp" != "" ];
-then
-echo "BOOTPROTO=dhcp" >> $1;
-fi
cp $1 /etc/sysconfig/network-scripts/
@@ -65,4 +61,4 @@ cp $1 /etc/sysconfig/network-scripts/
interface=$(echo $1 | awk -F - '{ print $2 }')
/sbin/ifdown $interface 2>/dev/null
-/sbin/ifup $interfac 2>/dev/null
+/sbin/ifup $interface 2>/dev/null
diff --git a/tools/lguest/lguest.txt b/tools/lguest/lguest.txt
index bff0c554485..7203ace65e8 100644
--- a/tools/lguest/lguest.txt
+++ b/tools/lguest/lguest.txt
@@ -29,10 +29,6 @@ Running Lguest:
You will need to configure your kernel with the following options:
- "General setup":
- "Prompt for development and/or incomplete code/drivers" = Y
- (CONFIG_EXPERIMENTAL=y)
-
"Processor type and features":
"Paravirtualized guest support" = Y
"Lguest guest support" = Y
@@ -43,10 +39,10 @@ Running Lguest:
"Device Drivers":
"Block devices"
- "Virtio block driver (EXPERIMENTAL)" = M/Y
+ "Virtio block driver" = M/Y
"Network device support"
"Universal TUN/TAP device driver support" = M/Y
- "Virtio network driver (EXPERIMENTAL)" = M/Y
+ "Virtio network driver" = M/Y
(CONFIG_VIRTIO_BLK=m, CONFIG_VIRTIO_NET=m and CONFIG_TUN=m)
"Virtualization"
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index c2206c87fc9..74659ecf93e 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -94,6 +94,18 @@
#define CPUINFO_PROC "cpu model"
#endif
+#ifdef __arc__
+#define rmb() asm volatile("" ::: "memory")
+#define cpu_relax() rmb()
+#define CPUINFO_PROC "Processor"
+#endif
+
+#ifdef __metag__
+#define rmb() asm volatile("" ::: "memory")
+#define cpu_relax() asm volatile("" ::: "memory")
+#define CPUINFO_PROC "CPU"
+#endif
+
#include <time.h>
#include <unistd.h>
#include <sys/types.h>
diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
index bc4ad797743..c8be0fbc514 100644
--- a/tools/perf/util/evlist.c
+++ b/tools/perf/util/evlist.c
@@ -314,7 +314,6 @@ static int perf_evlist__id_add_fd(struct perf_evlist *evlist,
struct perf_evsel *perf_evlist__id2evsel(struct perf_evlist *evlist, u64 id)
{
struct hlist_head *head;
- struct hlist_node *pos;
struct perf_sample_id *sid;
int hash;
@@ -324,7 +323,7 @@ struct perf_evsel *perf_evlist__id2evsel(struct perf_evlist *evlist, u64 id)
hash = hash_64(id, PERF_EVLIST__HLIST_BITS);
head = &evlist->heads[hash];
- hlist_for_each_entry(sid, pos, head, node)
+ hlist_for_each_entry(sid, head, node)
if (sid->id == id)
return sid->evsel;
diff --git a/tools/power/acpi/Makefile b/tools/power/acpi/Makefile
index 6b9cf7a987c..bafeb8d662a 100644
--- a/tools/power/acpi/Makefile
+++ b/tools/power/acpi/Makefile
@@ -13,6 +13,6 @@ clean :
rm -f $(CLEANFILES) $(patsubst %.c,%.o, $(SRCS)) *~
install :
- install acpidump /usr/bin/acpidump
+ install acpidump /usr/sbin/acpidump
install acpidump.8 /usr/share/man/man8
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index 0d7dc2cfefb..b4ddb748356 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -31,8 +31,6 @@ The \fB-S\fP option limits output to a 1-line System Summary for each interval.
.PP
The \fB-v\fP option increases verbosity.
.PP
-The \fB-s\fP option prints the SMI counter, equivalent to "-c 0x34"
-.PP
The \fB-c MSR#\fP option includes the delta of the specified 32-bit MSR counter.
.PP
The \fB-C MSR#\fP option includes the delta of the specified 64-bit MSR counter.
@@ -186,26 +184,24 @@ This is a weighted average, where the weight is %c0. ie. it is the total number
un-halted cycles elapsed per time divided by the number of CPUs.
.SH SMI COUNTING EXAMPLE
On Intel Nehalem and newer processors, MSR 0x34 is a System Management Mode Interrupt (SMI) counter.
-Using the -m option, you can display how many SMIs have fired since reset, or if there
-are SMIs during the measurement interval, you can display the delta using the -d option.
+This counter is shown by default under the "SMI" column.
.nf
-[root@x980 ~]# turbostat -m 0x34
-cor CPU %c0 GHz TSC MSR 0x034 %c1 %c3 %c6 %pc3 %pc6
- 1.41 1.82 3.38 0x00000000 8.92 37.82 51.85 17.37 0.55
- 0 0 3.73 2.03 3.38 0x00000055 1.72 48.25 46.31 17.38 0.55
- 0 6 0.14 1.63 3.38 0x00000056 5.30
- 1 2 2.51 1.80 3.38 0x00000056 15.65 29.33 52.52
- 1 8 0.10 1.65 3.38 0x00000056 18.05
- 2 4 1.16 1.68 3.38 0x00000056 5.87 24.47 68.50
- 2 10 0.10 1.63 3.38 0x00000056 6.93
- 8 1 3.84 1.91 3.38 0x00000056 1.36 50.65 44.16
- 8 7 0.08 1.64 3.38 0x00000056 5.12
- 9 3 1.82 1.73 3.38 0x00000056 7.59 24.21 66.38
- 9 9 0.09 1.68 3.38 0x00000056 9.32
- 10 5 1.66 1.65 3.38 0x00000056 15.10 50.00 33.23
- 10 11 1.72 1.65 3.38 0x00000056 15.05
+[root@x980 ~]# turbostat
+cor CPU %c0 GHz TSC SMI %c1 %c3 %c6 CTMP %pc3 %pc6
+ 0.11 1.91 3.38 0 1.84 0.26 97.79 29 0.82 83.87
+ 0 0 0.40 1.63 3.38 0 10.27 0.12 89.20 20 0.82 83.88
+ 0 6 0.06 1.63 3.38 0 10.61
+ 1 2 0.37 2.63 3.38 0 0.02 0.10 99.51 22
+ 1 8 0.01 1.62 3.38 0 0.39
+ 2 4 0.07 1.62 3.38 0 0.04 0.07 99.82 23
+ 2 10 0.02 1.62 3.38 0 0.09
+ 8 1 0.23 1.64 3.38 0 0.10 1.07 98.60 24
+ 8 7 0.02 1.64 3.38 0 0.31
+ 9 3 0.03 1.62 3.38 0 0.03 0.05 99.89 29
+ 9 9 0.02 1.62 3.38 0 0.05
+ 10 5 0.07 1.62 3.38 0 0.08 0.12 99.73 27
+ 10 11 0.03 1.62 3.38 0 0.13
^C
-[root@x980 ~]#
.fi
.SH NOTES
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index ce6d46038f7..6f3214ed444 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -58,6 +58,7 @@ unsigned int extra_msr_offset32;
unsigned int extra_msr_offset64;
unsigned int extra_delta_offset32;
unsigned int extra_delta_offset64;
+int do_smi;
double bclk;
unsigned int show_pkg;
unsigned int show_core;
@@ -99,6 +100,7 @@ struct thread_data {
unsigned long long extra_delta64;
unsigned long long extra_msr32;
unsigned long long extra_delta32;
+ unsigned int smi_count;
unsigned int cpu_id;
unsigned int flags;
#define CPU_IS_FIRST_THREAD_IN_CORE 0x2
@@ -248,6 +250,8 @@ void print_header(void)
if (has_aperf)
outp += sprintf(outp, " GHz");
outp += sprintf(outp, " TSC");
+ if (do_smi)
+ outp += sprintf(outp, " SMI");
if (extra_delta_offset32)
outp += sprintf(outp, " count 0x%03X", extra_delta_offset32);
if (extra_delta_offset64)
@@ -314,6 +318,8 @@ int dump_counters(struct thread_data *t, struct core_data *c,
extra_msr_offset32, t->extra_msr32);
fprintf(stderr, "msr0x%x: %016llX\n",
extra_msr_offset64, t->extra_msr64);
+ if (do_smi)
+ fprintf(stderr, "SMI: %08X\n", t->smi_count);
}
if (c) {
@@ -352,6 +358,7 @@ int dump_counters(struct thread_data *t, struct core_data *c,
* RAM_W: %5.2
* GHz: "GHz" 3 columns %3.2
* TSC: "TSC" 3 columns %3.2
+ * SMI: "SMI" 4 columns %4d
* percentage " %pc3" %6.2
* Perf Status percentage: %5.2
* "CTMP" 4 columns %4d
@@ -431,6 +438,10 @@ int format_counters(struct thread_data *t, struct core_data *c,
/* TSC */
outp += sprintf(outp, "%5.2f", 1.0 * t->tsc/units/interval_float);
+ /* SMI */
+ if (do_smi)
+ outp += sprintf(outp, "%4d", t->smi_count);
+
/* delta */
if (extra_delta_offset32)
outp += sprintf(outp, " %11llu", t->extra_delta32);
@@ -645,6 +656,9 @@ delta_thread(struct thread_data *new, struct thread_data *old,
*/
old->extra_msr32 = new->extra_msr32;
old->extra_msr64 = new->extra_msr64;
+
+ if (do_smi)
+ old->smi_count = new->smi_count - old->smi_count;
}
int delta_cpu(struct thread_data *t, struct core_data *c,
@@ -672,6 +686,7 @@ void clear_counters(struct thread_data *t, struct core_data *c, struct pkg_data
t->mperf = 0;
t->c1 = 0;
+ t->smi_count = 0;
t->extra_delta32 = 0;
t->extra_delta64 = 0;
@@ -802,6 +817,11 @@ int get_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
return -4;
}
+ if (do_smi) {
+ if (get_msr(cpu, MSR_SMI_COUNT, &msr))
+ return -5;
+ t->smi_count = msr & 0xFFFFFFFF;
+ }
if (extra_delta_offset32) {
if (get_msr(cpu, extra_delta_offset32, &msr))
return -5;
@@ -908,8 +928,7 @@ void print_verbose_header(void)
get_msr(0, MSR_NHM_PLATFORM_INFO, &msr);
- if (verbose)
- fprintf(stderr, "cpu0: MSR_NHM_PLATFORM_INFO: 0x%08llx\n", msr);
+ fprintf(stderr, "cpu0: MSR_NHM_PLATFORM_INFO: 0x%08llx\n", msr);
ratio = (msr >> 40) & 0xFF;
fprintf(stderr, "%d * %.0f = %.0f MHz max efficiency\n",
@@ -919,13 +938,16 @@ void print_verbose_header(void)
fprintf(stderr, "%d * %.0f = %.0f MHz TSC frequency\n",
ratio, bclk, ratio * bclk);
+ get_msr(0, MSR_IA32_POWER_CTL, &msr);
+ fprintf(stderr, "cpu0: MSR_IA32_POWER_CTL: 0x%08llx (C1E: %sabled)\n",
+ msr, msr & 0x2 ? "EN" : "DIS");
+
if (!do_ivt_turbo_ratio_limit)
goto print_nhm_turbo_ratio_limits;
get_msr(0, MSR_IVT_TURBO_RATIO_LIMIT, &msr);
- if (verbose)
- fprintf(stderr, "cpu0: MSR_IVT_TURBO_RATIO_LIMIT: 0x%08llx\n", msr);
+ fprintf(stderr, "cpu0: MSR_IVT_TURBO_RATIO_LIMIT: 0x%08llx\n", msr);
ratio = (msr >> 56) & 0xFF;
if (ratio)
@@ -1016,8 +1038,7 @@ print_nhm_turbo_ratio_limits:
get_msr(0, MSR_NHM_TURBO_RATIO_LIMIT, &msr);
- if (verbose)
- fprintf(stderr, "cpu0: MSR_NHM_TURBO_RATIO_LIMIT: 0x%08llx\n", msr);
+ fprintf(stderr, "cpu0: MSR_NHM_TURBO_RATIO_LIMIT: 0x%08llx\n", msr);
ratio = (msr >> 56) & 0xFF;
if (ratio)
@@ -1397,6 +1418,9 @@ int has_nehalem_turbo_ratio_limit(unsigned int family, unsigned int model)
case 0x2D: /* SNB Xeon */
case 0x3A: /* IVB */
case 0x3E: /* IVB Xeon */
+ case 0x3C: /* HSW */
+ case 0x3F: /* HSW */
+ case 0x45: /* HSW */
return 1;
case 0x2E: /* Nehalem-EX Xeon - Beckton */
case 0x2F: /* Westmere-EX Xeon - Eagleton */
@@ -1488,6 +1512,9 @@ void rapl_probe(unsigned int family, unsigned int model)
switch (model) {
case 0x2A:
case 0x3A:
+ case 0x3C: /* HSW */
+ case 0x3F: /* HSW */
+ case 0x45: /* HSW */
do_rapl = RAPL_PKG | RAPL_CORES | RAPL_GFX;
break;
case 0x2D:
@@ -1724,6 +1751,9 @@ int is_snb(unsigned int family, unsigned int model)
case 0x2D:
case 0x3A: /* IVB */
case 0x3E: /* IVB Xeon */
+ case 0x3C: /* HSW */
+ case 0x3F: /* HSW */
+ case 0x45: /* HSW */
return 1;
}
return 0;
@@ -1883,6 +1913,7 @@ void check_cpuid()
do_nehalem_platform_info = genuine_intel && has_invariant_tsc;
do_nhm_cstates = genuine_intel; /* all Intel w/ non-stop TSC have NHM counters */
+ do_smi = do_nhm_cstates;
do_snb_cstates = is_snb(family, model);
bclk = discover_bclk(family, model);
@@ -2219,9 +2250,6 @@ void cmdline(int argc, char **argv)
case 'c':
sscanf(optarg, "%x", &extra_delta_offset32);
break;
- case 's':
- extra_delta_offset32 = 0x34; /* SMI counter */
- break;
case 'C':
sscanf(optarg, "%x", &extra_delta_offset64);
break;
@@ -2248,7 +2276,7 @@ int main(int argc, char **argv)
cmdline(argc, argv);
if (verbose)
- fprintf(stderr, "turbostat v3.0 November 23, 2012"
+ fprintf(stderr, "turbostat v3.2 February 11, 2013"
" - Len Brown <lenb@kernel.org>\n");
turbostat_init();
diff --git a/tools/testing/ktest/examples/include/patchcheck.conf b/tools/testing/ktest/examples/include/patchcheck.conf
index 339d3e1700f..0eb0a5ac77d 100644
--- a/tools/testing/ktest/examples/include/patchcheck.conf
+++ b/tools/testing/ktest/examples/include/patchcheck.conf
@@ -14,6 +14,16 @@
PATCH_START := HEAD~3
PATCH_END := HEAD
+# Use the oldconfig if build_type wasn't defined
+DEFAULTS IF NOT DEFINED BUILD_TYPE
+DO_BUILD_TYPE := oldconfig
+
+DEFAULTS ELSE
+DO_BUILD_TYPE := ${BUILD_TYPE}
+
+DEFAULTS
+
+
# Change PATCH_CHECKOUT to be the branch you want to test. The test will
# do a git checkout of this branch before starting. Obviously both
# PATCH_START and PATCH_END must be in this branch (and PATCH_START must
@@ -43,6 +53,31 @@ PATCH_TEST_TYPE := boot
# (space delimited)
#IGNORE_WARNINGS = 39eaf7ef884dcc44f7ff1bac803ca2a1dcf43544 6edb2a8a385f0cdef51dae37ff23e74d76d8a6ce
+# Instead of just checking for warnings to files that are changed
+# it can be advantageous to check for any new warnings. If a
+# header file is changed, it could cause a warning in a file not
+# touched by the commit. To detect these kinds of warnings, you
+# can use the WARNINGS_FILE option.
+#
+# If the variable CREATE_WARNINGS_FILE is set, this config will
+# enable the WARNINGS_FILE during the patchcheck test. Also,
+# before running the patchcheck test, it will create the
+# warnings file.
+#
+DEFAULTS IF DEFINED CREATE_WARNINGS_FILE
+WARNINGS_FILE = ${OUTPUT_DIR}/warnings_file
+
+TEST_START IF DEFINED CREATE_WARNINGS_FILE
+# WARNINGS_FILE is already set by the DEFAULTS above
+TEST_TYPE = make_warnings_file
+# Checkout the commit before the patches to test,
+# and record all the warnings that exist before the patches
+# to test are added
+CHECKOUT = ${PATCHCHECK_START}~1
+# Force a full build
+BUILD_NOCLEAN = 0
+BUILD_TYPE = ${DO_BUILD_TYPE}
+
# If you are running a multi test, and the test failed on the first
# test but on, say the 5th patch. If you want to restart on the
# fifth patch, set PATCH_START1. This will make the first test start
@@ -61,6 +96,7 @@ PATCHCHECK_TYPE = ${PATCH_TEST_TYPE}
PATCHCHECK_START = ${PATCH_START1}
PATCHCHECK_END = ${PATCH_END}
CHECKOUT = ${PATCH_CHECKOUT}
+BUILD_TYPE = ${DO_BUILD_TYPE}
TEST_START IF ${TEST} == patchcheck && ${MULTI}
TEST_TYPE = patchcheck
@@ -72,3 +108,4 @@ PATCHCHECK_END = ${PATCH_END}
CHECKOUT = ${PATCH_CHECKOUT}
# Use multi to test different compilers?
MAKE_CMD = CC=gcc-4.5.1 make
+BUILD_TYPE = ${DO_BUILD_TYPE}
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 35fc584a4ff..4e67d52eb3a 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -126,6 +126,7 @@ my $start_minconfig_defined;
my $output_minconfig;
my $minconfig_type;
my $use_output_minconfig;
+my $warnings_file;
my $ignore_config;
my $ignore_errors;
my $addconfig;
@@ -193,6 +194,9 @@ my $patchcheck_end;
# which would require more options.
my $buildonly = 1;
+# tell build not to worry about warnings, even when WARNINGS_FILE is set
+my $warnings_ok = 0;
+
# set when creating a new config
my $newconfig = 0;
@@ -235,6 +239,7 @@ my %option_map = (
"START_MIN_CONFIG" => \$start_minconfig,
"MIN_CONFIG_TYPE" => \$minconfig_type,
"USE_OUTPUT_MIN_CONFIG" => \$use_output_minconfig,
+ "WARNINGS_FILE" => \$warnings_file,
"IGNORE_CONFIG" => \$ignore_config,
"TEST" => \$run_test,
"ADD_CONFIG" => \$addconfig,
@@ -619,6 +624,18 @@ sub set_value {
# Note if a test is something other than build, then we
# will need other manditory options.
if ($prvalue ne "install") {
+ # for bisect, we need to check BISECT_TYPE
+ if ($prvalue ne "bisect") {
+ $buildonly = 0;
+ }
+ } else {
+ # install still limits some manditory options.
+ $buildonly = 2;
+ }
+ }
+
+ if ($buildonly && $lvalue =~ /^BISECT_TYPE(\[.*\])?$/ && $prvalue ne "build") {
+ if ($prvalue ne "install") {
$buildonly = 0;
} else {
# install still limits some manditory options.
@@ -1062,7 +1079,7 @@ sub read_config {
}
sub __eval_option {
- my ($option, $i) = @_;
+ my ($name, $option, $i) = @_;
# Add space to evaluate the character before $
$option = " $option";
@@ -1094,7 +1111,11 @@ sub __eval_option {
my $o = "$var\[$i\]";
my $parento = "$var\[$parent\]";
- if (defined($opt{$o})) {
+ # If a variable contains itself, use the default var
+ if (($var eq $name) && defined($opt{$var})) {
+ $o = $opt{$var};
+ $retval = "$retval$o";
+ } elsif (defined($opt{$o})) {
$o = $opt{$o};
$retval = "$retval$o";
} elsif ($repeated && defined($opt{$parento})) {
@@ -1118,7 +1139,7 @@ sub __eval_option {
}
sub eval_option {
- my ($option, $i) = @_;
+ my ($name, $option, $i) = @_;
my $prev = "";
@@ -1134,7 +1155,7 @@ sub eval_option {
"Check for recursive variables\n";
}
$prev = $option;
- $option = __eval_option($option, $i);
+ $option = __eval_option($name, $option, $i);
}
return $option;
@@ -1191,11 +1212,24 @@ sub reboot {
}
if (defined($time)) {
- if (wait_for_monitor($time, $reboot_success_line)) {
+
+ # We only want to get to the new kernel, don't fail
+ # if we stumble over a call trace.
+ my $save_ignore_errors = $ignore_errors;
+ $ignore_errors = 1;
+
+ # Look for the good kernel to boot
+ if (wait_for_monitor($time, "Linux version")) {
# reboot got stuck?
doprint "Reboot did not finish. Forcing power cycle\n";
run_command "$power_cycle";
}
+
+ $ignore_errors = $save_ignore_errors;
+
+ # Still need to wait for the reboot to finish
+ wait_for_monitor($time, $reboot_success_line);
+
end_monitor;
}
}
@@ -1279,6 +1313,7 @@ sub start_monitor {
}
sub end_monitor {
+ return if (!defined $console);
if (--$monitor_cnt) {
return;
}
@@ -1585,7 +1620,7 @@ sub wait_for_input
$rin = '';
vec($rin, fileno($fp), 1) = 1;
- $ready = select($rin, undef, undef, $time);
+ ($ready, $time) = select($rin, undef, undef, $time);
$line = "";
@@ -1891,23 +1926,102 @@ sub get_version {
sub start_monitor_and_boot {
# Make sure the stable kernel has finished booting
- start_monitor;
- wait_for_monitor 5;
- end_monitor;
+
+ # Install bisects, don't need console
+ if (defined $console) {
+ start_monitor;
+ wait_for_monitor 5;
+ end_monitor;
+ }
get_grub_index;
get_version;
install;
- start_monitor;
+ start_monitor if (defined $console);
return monitor;
}
+my $check_build_re = ".*:.*(warning|error|Error):.*";
+my $utf8_quote = "\\x{e2}\\x{80}(\\x{98}|\\x{99})";
+
+sub process_warning_line {
+ my ($line) = @_;
+
+ chomp $line;
+
+ # for distcc heterogeneous systems, some compilers
+ # do things differently causing warning lines
+ # to be slightly different. This makes an attempt
+ # to fixe those issues.
+
+ # chop off the index into the line
+ # using distcc, some compilers give different indexes
+ # depending on white space
+ $line =~ s/^(\s*\S+:\d+:)\d+/$1/;
+
+ # Some compilers use UTF-8 extended for quotes and some don't.
+ $line =~ s/$utf8_quote/'/g;
+
+ return $line;
+}
+
+# Read buildlog and check against warnings file for any
+# new warnings.
+#
+# Returns 1 if OK
+# 0 otherwise
sub check_buildlog {
+ return 1 if (!defined $warnings_file);
+
+ my %warnings_list;
+
+ # Failed builds should not reboot the target
+ my $save_no_reboot = $no_reboot;
+ $no_reboot = 1;
+
+ if (-f $warnings_file) {
+ open(IN, $warnings_file) or
+ dodie "Error opening $warnings_file";
+
+ while (<IN>) {
+ if (/$check_build_re/) {
+ my $warning = process_warning_line $_;
+
+ $warnings_list{$warning} = 1;
+ }
+ }
+ close(IN);
+ }
+
+ # If warnings file didn't exist, and WARNINGS_FILE exist,
+ # then we fail on any warning!
+
+ open(IN, $buildlog) or dodie "Can't open $buildlog";
+ while (<IN>) {
+ if (/$check_build_re/) {
+ my $warning = process_warning_line $_;
+
+ if (!defined $warnings_list{$warning}) {
+ fail "New warning found (not in $warnings_file)\n$_\n";
+ $no_reboot = $save_no_reboot;
+ return 0;
+ }
+ }
+ }
+ $no_reboot = $save_no_reboot;
+ close(IN);
+}
+
+sub check_patch_buildlog {
my ($patch) = @_;
my @files = `git show $patch | diffstat -l`;
+ foreach my $file (@files) {
+ chomp $file;
+ }
+
open(IN, "git show $patch |") or
dodie "failed to show $patch";
while (<IN>) {
@@ -3055,11 +3169,13 @@ sub patchcheck {
build "oldconfig" or return 0;
}
-
- if (!defined($ignored_warnings{$sha1})) {
- check_buildlog $sha1 or return 0;
+ # No need to do per patch checking if warnings file exists
+ if (!defined($warnings_file) && !defined($ignored_warnings{$sha1})) {
+ check_patch_buildlog $sha1 or return 0;
}
+ check_buildlog or return 0;
+
next if ($type eq "build");
my $failed = 0;
@@ -3617,6 +3733,39 @@ sub make_min_config {
return 1;
}
+sub make_warnings_file {
+ my ($i) = @_;
+
+ if (!defined($warnings_file)) {
+ dodie "Must define WARNINGS_FILE for make_warnings_file test";
+ }
+
+ if ($build_type eq "nobuild") {
+ dodie "BUILD_TYPE can not be 'nobuild' for make_warnings_file test";
+ }
+
+ build $build_type or dodie "Failed to build";
+
+ open(OUT, ">$warnings_file") or dodie "Can't create $warnings_file";
+
+ open(IN, $buildlog) or dodie "Can't open $buildlog";
+ while (<IN>) {
+
+ # Some compilers use UTF-8 extended for quotes
+ # for distcc heterogeneous systems, this causes issues
+ s/$utf8_quote/'/g;
+
+ if (/$check_build_re/) {
+ print OUT;
+ }
+ }
+ close(IN);
+
+ close(OUT);
+
+ success $i;
+}
+
$#ARGV < 1 or die "ktest.pl version: $VERSION\n usage: ktest.pl config-file\n";
if ($#ARGV == 0) {
@@ -3662,7 +3811,7 @@ EOF
read_config $ktest_config;
if (defined($opt{"LOG_FILE"})) {
- $opt{"LOG_FILE"} = eval_option($opt{"LOG_FILE"}, -1);
+ $opt{"LOG_FILE"} = eval_option("LOG_FILE", $opt{"LOG_FILE"}, -1);
}
# Append any configs entered in manually to the config file.
@@ -3739,7 +3888,7 @@ sub set_test_option {
my $option = __set_test_option($name, $i);
return $option if (!defined($option));
- return eval_option($option, $i);
+ return eval_option($name, $option, $i);
}
# First we need to do is the builds
@@ -3818,9 +3967,9 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
$run_type = $bisect_type;
} elsif ($test_type eq "config_bisect") {
$run_type = $config_bisect_type;
- }
-
- if ($test_type eq "make_min_config") {
+ } elsif ($test_type eq "make_min_config") {
+ $run_type = "";
+ } elsif ($test_type eq "make_warnings_file") {
$run_type = "";
}
@@ -3877,10 +4026,15 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
} elsif ($test_type eq "make_min_config") {
make_min_config $i;
next;
+ } elsif ($test_type eq "make_warnings_file") {
+ $no_reboot = 1;
+ make_warnings_file $i;
+ next;
}
if ($build_type ne "nobuild") {
build $build_type or next;
+ check_buildlog or next;
}
if ($test_type eq "install") {
diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf
index 4012e933034..0a290fb4cd5 100644
--- a/tools/testing/ktest/sample.conf
+++ b/tools/testing/ktest/sample.conf
@@ -793,6 +793,20 @@
# Example for a virtual guest call "Guest".
#POWER_OFF = virsh destroy Guest
+# To have the build fail on "new" warnings, create a file that
+# contains a list of all known warnings (they must match exactly
+# to the line with 'warning:', 'error:' or 'Error:'. If the option
+# WARNINGS_FILE is set, then that file will be read, and if the
+# build detects a warning, it will examine this file and if the
+# warning does not exist in it, it will fail the build.
+#
+# Note, if this option is defined to a file that does not exist
+# then any warning will fail the build.
+# (see make_warnings_file below)
+#
+# (optional, default undefined)
+#WARNINGS_FILE = ${OUTPUT_DIR}/warnings_file
+
# The way to execute a command on the target
# (default ssh $SSH_USER@$MACHINE $SSH_COMMAND";)
# The variables SSH_USER, MACHINE and SSH_COMMAND are defined
@@ -1222,3 +1236,33 @@
# MIN_CONFIG_TYPE = test
# TEST = ssh ${USER}@${MACHINE} echo hi
#
+#
+#
+#
+# For TEST_TYPE = make_warnings_file
+#
+# If you want the build to fail when a new warning is discovered
+# you set the WARNINGS_FILE to point to a file of known warnings.
+#
+# The test "make_warnings_file" will let you create a new warnings
+# file before you run other tests, like patchcheck.
+#
+# What this test does is to run just a build, you still need to
+# specify BUILD_TYPE to tell the test what type of config to use.
+# A BUILD_TYPE of nobuild will fail this test.
+#
+# The test will do the build and scan for all warnings. Any warning
+# it discovers will be saved in the WARNINGS_FILE (required) option.
+#
+# It is recommended (but not necessary) to make sure BUILD_NOCLEAN is
+# off, so that a full build is done (make mrproper is performed).
+# That way, all warnings will be captured.
+#
+# Example:
+#
+# TEST_TYPE = make_warnings_file
+# WARNINGS_FILE = ${OUTPUT_DIR}
+# BUILD_TYPE = useconfig:oldconfig
+# CHECKOUT = v3.8
+# BUILD_NOCLEAN = 0
+#
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index 85baf11e2ac..3cc0ad7ae86 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -1,4 +1,10 @@
-TARGETS = breakpoints kcmp mqueue vm cpu-hotplug memory-hotplug
+TARGETS = breakpoints
+TARGETS += kcmp
+TARGETS += mqueue
+TARGETS += vm
+TARGETS += cpu-hotplug
+TARGETS += memory-hotplug
+TARGETS += efivarfs
all:
for TARGET in $(TARGETS); do \
diff --git a/tools/testing/selftests/README.txt b/tools/testing/selftests/README.txt
new file mode 100644
index 00000000000..5e2faf9c55d
--- /dev/null
+++ b/tools/testing/selftests/README.txt
@@ -0,0 +1,42 @@
+Linux Kernel Selftests
+
+The kernel contains a set of "self tests" under the tools/testing/selftests/
+directory. These are intended to be small unit tests to exercise individual
+code paths in the kernel.
+
+Running the selftests
+=====================
+
+To build the tests:
+
+ $ make -C tools/testing/selftests
+
+
+To run the tests:
+
+ $ make -C tools/testing/selftests run_tests
+
+- note that some tests will require root privileges.
+
+
+To run only tests targetted for a single subsystem:
+
+ $ make -C tools/testing/selftests TARGETS=cpu-hotplug run_tests
+
+See the top-level tools/testing/selftests/Makefile for the list of all possible
+targets.
+
+
+Contributing new tests
+======================
+
+In general, the rules for for selftests are
+
+ * Do as much as you can if you're not root;
+
+ * Don't take too long;
+
+ * Don't break the build on any architecture, and
+
+ * Don't cause the top-level "make run_tests" to fail if your feature is
+ unconfigured.
diff --git a/tools/testing/selftests/efivarfs/Makefile b/tools/testing/selftests/efivarfs/Makefile
new file mode 100644
index 00000000000..29e8c6bc81b
--- /dev/null
+++ b/tools/testing/selftests/efivarfs/Makefile
@@ -0,0 +1,12 @@
+CC = $(CROSS_COMPILE)gcc
+CFLAGS = -Wall
+
+test_objs = open-unlink create-read
+
+all: $(test_objs)
+
+run_tests: all
+ @/bin/bash ./efivarfs.sh || echo "efivarfs selftests: [FAIL]"
+
+clean:
+ rm -f $(test_objs)
diff --git a/tools/testing/selftests/efivarfs/create-read.c b/tools/testing/selftests/efivarfs/create-read.c
new file mode 100644
index 00000000000..7feef188096
--- /dev/null
+++ b/tools/testing/selftests/efivarfs/create-read.c
@@ -0,0 +1,38 @@
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <string.h>
+
+int main(int argc, char **argv)
+{
+ const char *path;
+ char buf[4];
+ int fd, rc;
+
+ if (argc < 2) {
+ fprintf(stderr, "usage: %s <path>\n", argv[0]);
+ return EXIT_FAILURE;
+ }
+
+ path = argv[1];
+
+ /* create a test variable */
+ fd = open(path, O_RDWR | O_CREAT, 0600);
+ if (fd < 0) {
+ perror("open(O_WRONLY)");
+ return EXIT_FAILURE;
+ }
+
+ rc = read(fd, buf, sizeof(buf));
+ if (rc != 0) {
+ fprintf(stderr, "Reading a new var should return EOF\n");
+ return EXIT_FAILURE;
+ }
+
+ return EXIT_SUCCESS;
+}
diff --git a/tools/testing/selftests/efivarfs/efivarfs.sh b/tools/testing/selftests/efivarfs/efivarfs.sh
new file mode 100644
index 00000000000..77edcdcc016
--- /dev/null
+++ b/tools/testing/selftests/efivarfs/efivarfs.sh
@@ -0,0 +1,198 @@
+#!/bin/bash
+
+efivarfs_mount=/sys/firmware/efi/efivars
+test_guid=210be57c-9849-4fc7-a635-e6382d1aec27
+
+check_prereqs()
+{
+ local msg="skip all tests:"
+
+ if [ $UID != 0 ]; then
+ echo $msg must be run as root >&2
+ exit 0
+ fi
+
+ if ! grep -q "^\S\+ $efivarfs_mount efivarfs" /proc/mounts; then
+ echo $msg efivarfs is not mounted on $efivarfs_mount >&2
+ exit 0
+ fi
+}
+
+run_test()
+{
+ local test="$1"
+
+ echo "--------------------"
+ echo "running $test"
+ echo "--------------------"
+
+ if [ "$(type -t $test)" = 'function' ]; then
+ ( $test )
+ else
+ ( ./$test )
+ fi
+
+ if [ $? -ne 0 ]; then
+ echo " [FAIL]"
+ rc=1
+ else
+ echo " [PASS]"
+ fi
+}
+
+test_create()
+{
+ local attrs='\x07\x00\x00\x00'
+ local file=$efivarfs_mount/$FUNCNAME-$test_guid
+
+ printf "$attrs\x00" > $file
+
+ if [ ! -e $file ]; then
+ echo "$file couldn't be created" >&2
+ exit 1
+ fi
+
+ if [ $(stat -c %s $file) -ne 5 ]; then
+ echo "$file has invalid size" >&2
+ exit 1
+ fi
+}
+
+test_create_empty()
+{
+ local file=$efivarfs_mount/$FUNCNAME-$test_guid
+
+ : > $file
+
+ if [ ! -e $file ]; then
+ echo "$file can not be created without writing" >&2
+ exit 1
+ fi
+}
+
+test_create_read()
+{
+ local file=$efivarfs_mount/$FUNCNAME-$test_guid
+ ./create-read $file
+}
+
+test_delete()
+{
+ local attrs='\x07\x00\x00\x00'
+ local file=$efivarfs_mount/$FUNCNAME-$test_guid
+
+ printf "$attrs\x00" > $file
+
+ if [ ! -e $file ]; then
+ echo "$file couldn't be created" >&2
+ exit 1
+ fi
+
+ rm $file
+
+ if [ -e $file ]; then
+ echo "$file couldn't be deleted" >&2
+ exit 1
+ fi
+
+}
+
+# test that we can remove a variable by issuing a write with only
+# attributes specified
+test_zero_size_delete()
+{
+ local attrs='\x07\x00\x00\x00'
+ local file=$efivarfs_mount/$FUNCNAME-$test_guid
+
+ printf "$attrs\x00" > $file
+
+ if [ ! -e $file ]; then
+ echo "$file does not exist" >&2
+ exit 1
+ fi
+
+ printf "$attrs" > $file
+
+ if [ -e $file ]; then
+ echo "$file should have been deleted" >&2
+ exit 1
+ fi
+}
+
+test_open_unlink()
+{
+ local file=$efivarfs_mount/$FUNCNAME-$test_guid
+ ./open-unlink $file
+}
+
+# test that we can create a range of filenames
+test_valid_filenames()
+{
+ local attrs='\x07\x00\x00\x00'
+ local ret=0
+
+ local file_list="abc dump-type0-11-1-1362436005 1234 -"
+ for f in $file_list; do
+ local file=$efivarfs_mount/$f-$test_guid
+
+ printf "$attrs\x00" > $file
+
+ if [ ! -e $file ]; then
+ echo "$file could not be created" >&2
+ ret=1
+ else
+ rm $file
+ fi
+ done
+
+ exit $ret
+}
+
+test_invalid_filenames()
+{
+ local attrs='\x07\x00\x00\x00'
+ local ret=0
+
+ local file_list="
+ -1234-1234-1234-123456789abc
+ foo
+ foo-bar
+ -foo-
+ foo-barbazba-foob-foob-foob-foobarbazfoo
+ foo-------------------------------------
+ -12345678-1234-1234-1234-123456789abc
+ a-12345678=1234-1234-1234-123456789abc
+ a-12345678-1234=1234-1234-123456789abc
+ a-12345678-1234-1234=1234-123456789abc
+ a-12345678-1234-1234-1234=123456789abc
+ 1112345678-1234-1234-1234-123456789abc"
+
+ for f in $file_list; do
+ local file=$efivarfs_mount/$f
+
+ printf "$attrs\x00" 2>/dev/null > $file
+
+ if [ -e $file ]; then
+ echo "Creating $file should have failed" >&2
+ rm $file
+ ret=1
+ fi
+ done
+
+ exit $ret
+}
+
+check_prereqs
+
+rc=0
+
+run_test test_create
+run_test test_create_empty
+run_test test_create_read
+run_test test_delete
+run_test test_zero_size_delete
+run_test test_open_unlink
+run_test test_valid_filenames
+run_test test_invalid_filenames
+
+exit $rc
diff --git a/tools/testing/selftests/efivarfs/open-unlink.c b/tools/testing/selftests/efivarfs/open-unlink.c
new file mode 100644
index 00000000000..8c0764407b3
--- /dev/null
+++ b/tools/testing/selftests/efivarfs/open-unlink.c
@@ -0,0 +1,63 @@
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+
+int main(int argc, char **argv)
+{
+ const char *path;
+ char buf[5];
+ int fd, rc;
+
+ if (argc < 2) {
+ fprintf(stderr, "usage: %s <path>\n", argv[0]);
+ return EXIT_FAILURE;
+ }
+
+ path = argv[1];
+
+ /* attributes: EFI_VARIABLE_NON_VOLATILE |
+ * EFI_VARIABLE_BOOTSERVICE_ACCESS |
+ * EFI_VARIABLE_RUNTIME_ACCESS
+ */
+ *(uint32_t *)buf = 0x7;
+ buf[4] = 0;
+
+ /* create a test variable */
+ fd = open(path, O_WRONLY | O_CREAT);
+ if (fd < 0) {
+ perror("open(O_WRONLY)");
+ return EXIT_FAILURE;
+ }
+
+ rc = write(fd, buf, sizeof(buf));
+ if (rc != sizeof(buf)) {
+ perror("write");
+ return EXIT_FAILURE;
+ }
+
+ close(fd);
+
+ fd = open(path, O_RDONLY);
+ if (fd < 0) {
+ perror("open");
+ return EXIT_FAILURE;
+ }
+
+ if (unlink(path) < 0) {
+ perror("unlink");
+ return EXIT_FAILURE;
+ }
+
+ rc = read(fd, buf, sizeof(buf));
+ if (rc > 0) {
+ fprintf(stderr, "reading from an unlinked variable "
+ "shouldn't be possible\n");
+ return EXIT_FAILURE;
+ }
+
+ return EXIT_SUCCESS;
+}
diff --git a/tools/usb/ffs-test.c b/tools/usb/ffs-test.c
index 8674b9ec14f..fe1e66b6ef4 100644
--- a/tools/usb/ffs-test.c
+++ b/tools/usb/ffs-test.c
@@ -38,7 +38,7 @@
#include <unistd.h>
#include <tools/le_byteshift.h>
-#include "../../include/linux/usb/functionfs.h"
+#include "../../include/uapi/linux/usb/functionfs.h"
/******************** Little Endian Handling ********************************/
diff --git a/tools/usb/testusb.c b/tools/usb/testusb.c
index 68d0734b208..879f9870a6b 100644
--- a/tools/usb/testusb.c
+++ b/tools/usb/testusb.c
@@ -279,8 +279,7 @@ nomem:
entry->ifnum = ifnum;
- /* FIXME ask usbfs what speed; update USBDEVFS_CONNECTINFO so
- * it tells about high speed etc */
+ /* FIXME update USBDEVFS_CONNECTINFO so it tells about high speed etc */
fprintf(stderr, "%s speed\t%s\t%u\n",
speed(entry->speed), entry->name, entry->ifnum);
@@ -351,7 +350,7 @@ restart:
return arg;
}
-static const char *usbfs_dir_find(void)
+static const char *usb_dir_find(void)
{
static char udev_usb_path[] = "/dev/bus/usb";
@@ -380,7 +379,7 @@ int main (int argc, char **argv)
int c;
struct testdev *entry;
char *device;
- const char *usbfs_dir = NULL;
+ const char *usb_dir = NULL;
int all = 0, forever = 0, not = 0;
int test = -1 /* all */;
struct usbtest_param param;
@@ -407,8 +406,8 @@ int main (int argc, char **argv)
case 'D': /* device, if only one */
device = optarg;
continue;
- case 'A': /* use all devices with specified usbfs dir */
- usbfs_dir = optarg;
+ case 'A': /* use all devices with specified USB dir */
+ usb_dir = optarg;
/* FALL THROUGH */
case 'a': /* use all devices */
device = NULL;
@@ -449,7 +448,7 @@ usage:
"usage: %s [options]\n"
"Options:\n"
"\t-D dev only test specific device\n"
- "\t-A usbfs-dir\n"
+ "\t-A usb-dir\n"
"\t-a test all recognized devices\n"
"\t-l loop forever(for stress test)\n"
"\t-t testnum only run specified case\n"
@@ -470,18 +469,18 @@ usage:
goto usage;
}
- /* Find usbfs mount point */
- if (!usbfs_dir) {
- usbfs_dir = usbfs_dir_find();
- if (!usbfs_dir) {
- fputs ("usbfs files are missing\n", stderr);
+ /* Find usb device subdirectory */
+ if (!usb_dir) {
+ usb_dir = usb_dir_find();
+ if (!usb_dir) {
+ fputs ("USB device files are missing\n", stderr);
return -1;
}
}
/* collect and list the test devices */
- if (ftw (usbfs_dir, find_testdev, 3) != 0) {
- fputs ("ftw failed; is usbfs missing?\n", stderr);
+ if (ftw (usb_dir, find_testdev, 3) != 0) {
+ fputs ("ftw failed; are USB device files missing?\n", stderr);
return -1;
}
@@ -507,10 +506,8 @@ usage:
return handle_testdev (entry) != entry;
}
status = pthread_create (&entry->thread, 0, handle_testdev, entry);
- if (status) {
+ if (status)
perror ("pthread_create");
- continue;
- }
}
if (device) {
struct testdev dev;
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-07 11:16:54 +0000