aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-09-16wireless: Reset beacon_found while updating regulatoryRajkumar Manoharan
During the association, the regulatory is updated by country IE that reaps the previously found beacons. The impact is that after a STA disconnects *or* when for any reason a regulatory domain change happens the beacon hint flag is not cleared therefore preventing future beacon hints to be learned. This is important as a regulatory domain change or a restore of regulatory settings would set back the passive scan and no-ibss flags on the channel. This is the right place to do this given that it covers any regulatory domain change. Cc: stable@kernel.org Reviewed-by: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13iwlagn: fix command queue timeoutJohannes Berg
If the command queue is constantly busy, which can happen in P2P, the hangcheck timer will frequently find a command in it and will eventually reset the device because nothing sets the timestamp for this queue when commands are processed. Fix this by setting the timestamp when a command completes. Cc: stable@kernel.org #2.6.39, #3.0.0 #3.1.0 Signed-off-by: Johannes Berg <johannes.berg@intel.com> SIgned-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13iwlagn: fix stack corruptionJohannes Berg
Alexander reported a strange crash in iwlagn that Meenakshi and Wey couldn't reproduce. I just ran into the same issue and tracked it down to stack corruption. This fixes it. The problem was introduced in commit 4b8b99b6e650d0527f3a123744b7459976581d14 Author: Wey-Yi Guy <wey-yi.w.guy@intel.com> Date: Fri Jul 8 14:29:48 2011 -0700 iwlagn: radio sensor offset in le16 format Cc: Wey-Yi Guy <wey-yi.w.guy@intel.com> Cc: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Reported-by: Alexander Diewald <alex@diewald.cc> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13ath9k: Fix kernel panic on unplugging the deviceMohammed Shafi Shajakhan
when the device is yanked out ath_pci_remove starts doing the cleanups, unregistering the hardware etc. so we should bail out immediately when we get drv_flush callback from mac80211 when the card is being unplugged. the panic occurs after we had associated to an AP. EIP: 0060:[<fb315b00>] EFLAGS: 00010246 CPU: 0 EIP is at ath_reset+0xa0/0x1c0 [ath9k] EAX: 00000000 EBX: 000697c0 ECX: 00000002 EDX: f3c3ccf0 ESI: 00000000 EDI: 00000000 EBP: f43e7b78 ESP: f43e7b50 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process kworker/u:2 (pid: 182, ti=f43e6000 task=f3c3c7c0 task.ti=f43e6000) Stack: 0000002a 00000000 00000000 003e7b78 0000000f eaaa8500 ffffffea eaaa97c0 eaaaa000 00000001 f43e7ba8 fb315d23 f99e7721 ecece680 eaaac738 eaaa8500 eaaaa020 000000c8 000000c8 00000000 eaaa8d58 eaaa8500 f43e7bd0 fb080b29 Call Trace: [<fb315d23>] ath9k_flush+0x103/0x170 [ath9k] [<fb080b29>] __ieee80211_recalc_idle+0x2c9/0x400 [mac80211] [<fb080c8e>] ieee80211_recalc_idle+0x2e/0x60 [mac80211] [<fb07aa73>] ieee80211_mgd_deauth+0x173/0x210 [mac80211] [<fb084559>] ieee80211_deauth+0x19/0x20 [mac80211] [<f99dda53>] __cfg80211_mlme_deauth+0xf3/0x140 [cfg80211] [<c0633d00>] ? __mutex_lock_common+0x1f0/0x380 [<f99e1b5d>] __cfg80211_disconnect+0x18d/0x1f0 [cfg80211] [<f99c8199>] cfg80211_netdev_notifier_call+0x159/0x5c0 [cfg80211] [<c0608a64>] ? packet_notifier+0x174/0x1f0 [<c0639202>] notifier_call_chain+0x82/0xb0 [<c0170d8f>] raw_notifier_call_chain+0x1f/0x30 [<c053b86c>] call_netdevice_notifiers+0x2c/0x60 [<c0182184>] ? trace_hardirqs_on_caller+0xf4/0x180 [<c053b8ec>] __dev_close_many+0x4c/0xd0 [<c053ba2d>] dev_close_many+0x6d/0xc0 [<c053bb53>] rollback_registered_many+0x93/0x1c0 [<c018221b>] ? trace_hardirqs_on+0xb/0x10 [<c053bc95>] unregister_netdevice_many+0x15/0x50 [<fb07f83b>] ieee80211_remove_interfaces+0x7b/0xb0 [mac80211] [<fb06a14b>] ieee80211_unregister_hw+0x4b/0x110 [mac80211] [<fb311a4a>] ath9k_deinit_device+0x3a/0x60 [ath9k] [<fb31eed6>] ath_pci_remove+0x46/0x90 [ath9k] [<c03b4ac4>] pci_device_remove+0x44/0x100 [<c043eb54>] __device_release_driver+0x64/0xb0 [<c043ec67>] device_release_driver+0x27/0x40 [<c043deeb>] bus_remove_device+0x7b/0xa0 [<c043c491>] device_del+0xf1/0x180 [<c043c530>] device_unregister+0x10/0x20 [<c03afafe>] pci_stop_bus_device+0x6e/0x80 [<c03afb72>] pci_remove_bus_device+0x12/0xa0 [<c03c2f29>] pciehp_unconfigure_device+0x89/0x180 [<c0181e54>] ? mark_held_locks+0x64/0x100 [<c063390f>] ? __mutex_unlock_slowpath+0xaf/0x140 [<c03c1f84>] pciehp_disable_slot+0x64/0x1b0 [<c03c2850>] pciehp_power_thread+0xd0/0x100 [<c0164ad0>] ? process_one_work+0x100/0x4d0 [<c0164b4c>] process_one_work+0x17c/0x4d0 [<c0164ad0>] ? process_one_work+0x100/0x4d0 [<c03c2780>] ? queue_interrupt_event+0xa0/0xa0 [<c01662bb>] worker_thread+0x13b/0x320 [<c018221b>] ? trace_hardirqs_on+0xb/0x10 [<c0166180>] ? manage_workers+0x1e0/0x1e0 [<c016a654>] kthread+0x84/0x90 [<c016a5d0>] ? __init_kthread_worker+0x60/0x60 [<c063d106>] kernel_thread_helper+0x6/0x10 Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13mac80211: fix missing sta_lock in __sta_info_destroyJohannes Berg
Since my commit 34e895075e21be3e21e71d6317440d1ee7969ad0 ("mac80211: allow station add/remove to sleep") there is a race in mac80211 when it clears the TIM bit because a sleeping station disconnected, the spinlock isn't held around the relevant code any more. Use the right API to acquire the spinlock correctly. Cc: stable@kernel.org [2.6.34+] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13rtlwifi: Fix problem when switching connectionsGeorge
The driver fails to clear encryption keys making it impossible to switch connections. Signed-off-by: George <george0505@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> [2.6.39+] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13rtlwifi: rtl8192su: Fix problem connecting to HT-enabled APGeorge
The driver fails to connect to 802.11n-enabled APs. The patch fixes Bug #42262. Signed-off-by: George <george0505@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> [2.6.39+] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-30ath9k_hw: fix calibration on 5 ghzFelix Fietkau
ADC calibrations cannot run on 5 GHz with fast clock enabled. They need to be disabled, otherwise they'll hang and IQ mismatch calibration will not be run either. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Adrian Chadd <adrian@freebsd.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29iwlegacy: fix BUG_ON(info->control.rates[0].idx < 0)Stanislaw Gruszka
When trying to connect to 5GHz we can provide negative index to mac80211 what trigger BUG_ON. Reason of iwl-3945-rs malfunction on 5GHz is unknown and needs further investigation. For now, to do not trigger a bug, correct value and just print WARNING. Address bug: https://bugzilla.redhat.com/show_bug.cgi?id=730653 Reported-and-tested-by: Jan Teichmann <jan.teichmann@gmail.com> Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29ath9k_hw: Fix init mode register regressionRajkumar Manoharan
The commit 172805ad46b78717a738ca5c7908c68f0326d3a9 overwirtes additional clock settings of AR9330 to all AR9300 chips. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24ath9k: Fix PS wrappers in ath9k_set_coverage_classMohammed Shafi Shajakhan
this callback is called during suspend/resume and also via iw command. it configures parameters like sifs, slottime, acktimeout in ath9k_hw_init_global_settings where few REG_READ, REG_RMW are also done and hence the need for PS wrappers Cc: stable@kernel.org Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24carl9170: Fix mismatch in carl9170_op_set_key mutex lock-unlockAlexey Khoroshilov
If is_main_vif(ar, vif) reports that we have to fall back to software encryption, we goto err_softw; before locking ar->mutex. As a result, we have unprotected call to carl9170_set_operating_mode and unmatched mutex_unlock. The patch fix the issue by adding mutex_lock before goto. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: <stable@kernel.org> Acked-By: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-23wl12xx: add max_sched_scan_ssids value to the hw descriptionLuciano Coelho
After commit 5a865ba, we require a separate value to indicate the number of supported SSIDs in scheduled scans. This patch adds a proper value to the wl12xx driver. This fixes a regression in 3.1-rc3 where scheduled scans were not working properly with the wl12xx driver. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-23wl12xx: Fix validation of pm_runtime_get_sync return valueIdo Yariv
wl1271_sdio_power_on checks if the return value of pm_runtime_get_sync is non-zero, and if so bails out. However, pm_runtime_get_sync can return a positive number which does not suggest an error has occurred. This is problematic for two reasons: 1. The function will needlessly bail out without decrementing back the runtime PM reference counter. 2. wl1271_power_on only checks if wl1271_power_on return value is negative. This means that wl1271_power_on will continue even if wl1271_sdio_power_on bailed out. As a result, sdio transactions will be initiated without properly enabling the sdio function and claiming the host. This could even lead to a kernel panic. Fix this by only checking that the return value of pm_runtime_get_sync is non-negative. Signed-off-by: Ido Yariv <ido@wizery.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-23wl12xx: Remove obsolete testmode NVS push commandIdo Yariv
The testmode NVS push command is no longer in use. In addition, it has several implementation issues that prevent it from working correctly: 1. wl1271_tm_cmd_configure relies on wl->chip.id being set. However, since the device was not necessarily booted by the time the function is called, wl->chip.id will be initialized to 0. 2. The NVS file is fetched by calling request_firmware() before it is possible to push an NVS file. 3. The maximum allowed size of nl binary payloads is not sufficient for pushing NVS files. 4. Pushing 128x NVS files will always fail due to a bug in the validation code. 5. In case the pushed NVS file is found invalid, the mutex will be kept locked and the nvs member will become a dangling pointer. Since this feature is not being used, remove it completely instead of fixing it. Signed-off-by: Ido Yariv <ido@wizery.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22bcma: add uevent to the bus, to autoload driversDavid Woodhouse
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22ath9k_hw: Fix STA (AR9485) bringup issue due to incorrect MAC addressSenthil Balasubramanian
Due to some recent optimization done in the way the mac address bytes are written into the OTP memory, some AR9485 chipsets were forced to use the first byte from the eeprom template and the remaining bytes are read from OTP. AR9485 happens to use generic eeprom template which has 0x1 as the first byte causes issues in bringing up the card. So fixed the eeprom template accordingly to address the issue. Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Signed-off-by: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22rt2x00: do not drop usb dev reference counter on suspendStanislaw Gruszka
When hibernating ->resume may not be called by usb core, but disconnect and probe instead, so we do not increase the counter after decreasing it in ->supend. As a result we free memory early, and get crash when unplugging usb dongle. BUG: unable to handle kernel paging request at 6b6b6b9f IP: [<c06909b0>] driver_sysfs_remove+0x10/0x30 *pdpt = 0000000034f21001 *pde = 0000000000000000 Pid: 20, comm: khubd Not tainted 3.1.0-rc1-wl+ #20 LENOVO 6369CTO/6369CTO EIP: 0060:[<c06909b0>] EFLAGS: 00010202 CPU: 1 EIP is at driver_sysfs_remove+0x10/0x30 EAX: 6b6b6b6b EBX: f52bba34 ECX: 00000000 EDX: 6b6b6b6b ESI: 6b6b6b6b EDI: c0a0ea20 EBP: f61c9e68 ESP: f61c9e64 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process khubd (pid: 20, ti=f61c8000 task=f6138270 task.ti=f61c8000) Call Trace: [<c06909ef>] __device_release_driver+0x1f/0xa0 [<c0690b20>] device_release_driver+0x20/0x40 [<c068fd64>] bus_remove_device+0x84/0xe0 [<c068e12a>] ? device_remove_attrs+0x2a/0x80 [<c068e267>] device_del+0xe7/0x170 [<c06d93d4>] usb_disconnect+0xd4/0x180 [<c06d9d61>] hub_thread+0x691/0x1600 [<c0473260>] ? wake_up_bit+0x30/0x30 [<c0442a39>] ? complete+0x49/0x60 [<c06d96d0>] ? hub_disconnect+0xd0/0xd0 [<c06d96d0>] ? hub_disconnect+0xd0/0xd0 [<c0472eb4>] kthread+0x74/0x80 [<c0472e40>] ? kthread_worker_fn+0x150/0x150 [<c0809b3e>] kernel_thread_helper+0x6/0x10 Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22mac80211: fix suspend/resume races with unregister hwStanislaw Gruszka
Do not call ->suspend, ->resume methods after we unregister wiphy. Also delete sta_clanup timer after we finish wiphy unregister to avoid this: WARNING: at lib/debugobjects.c:262 debug_print_object+0x85/0xa0() Hardware name: 6369CTO ODEBUG: free active (active state 0) object type: timer_list hint: sta_info_cleanup+0x0/0x180 [mac80211] Modules linked in: aes_i586 aes_generic fuse bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq mperf ext2 dm_mod uinput thinkpad_acpi hwmon sg arc4 rt2800usb rt2800lib crc_ccitt rt2x00usb rt2x00lib mac80211 cfg80211 i2c_i801 iTCO_wdt iTCO_vendor_support e1000e ext4 mbcache jbd2 sd_mod crc_t10dif sr_mod cdrom yenta_socket ahci libahci pata_acpi ata_generic ata_piix i915 drm_kms_helper drm i2c_algo_bit video [last unloaded: microcode] Pid: 5663, comm: pm-hibernate Not tainted 3.1.0-rc1-wl+ #19 Call Trace: [<c0454cfd>] warn_slowpath_common+0x6d/0xa0 [<c05e05e5>] ? debug_print_object+0x85/0xa0 [<c05e05e5>] ? debug_print_object+0x85/0xa0 [<c0454dae>] warn_slowpath_fmt+0x2e/0x30 [<c05e05e5>] debug_print_object+0x85/0xa0 [<f8a808e0>] ? sta_info_alloc+0x1a0/0x1a0 [mac80211] [<c05e0bd2>] debug_check_no_obj_freed+0xe2/0x180 [<c051175b>] kfree+0x8b/0x150 [<f8a126ae>] cfg80211_dev_free+0x7e/0x90 [cfg80211] [<f8a13afd>] wiphy_dev_release+0xd/0x10 [cfg80211] [<c068d959>] device_release+0x19/0x80 [<c05d06ba>] kobject_release+0x7a/0x1c0 [<c07646a8>] ? rtnl_unlock+0x8/0x10 [<f8a13adb>] ? wiphy_resume+0x6b/0x80 [cfg80211] [<c05d0640>] ? kobject_del+0x30/0x30 [<c05d1a6d>] kref_put+0x2d/0x60 [<c05d056d>] kobject_put+0x1d/0x50 [<c08015f4>] ? mutex_lock+0x14/0x40 [<c068d60f>] put_device+0xf/0x20 [<c069716a>] dpm_resume+0xca/0x160 [<c04912bd>] hibernation_snapshot+0xcd/0x260 [<c04903df>] ? freeze_processes+0x3f/0x90 [<c049151b>] hibernate+0xcb/0x1e0 [<c048fdc0>] ? pm_async_store+0x40/0x40 [<c048fe60>] state_store+0xa0/0xb0 [<c048fdc0>] ? pm_async_store+0x40/0x40 [<c05d0200>] kobj_attr_store+0x20/0x30 [<c0575ea4>] sysfs_write_file+0x94/0xf0 [<c051e26a>] vfs_write+0x9a/0x160 [<c0575e10>] ? sysfs_open_file+0x200/0x200 [<c051e3fd>] sys_write+0x3d/0x70 [<c080959f>] sysenter_do_call+0x12/0x28 Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22Merge branch 'master' of ↵John W. Linville
master.kernel.org:/pub/scm/linux/kernel/git/padovan/bluetooth
2011-08-13iwlagn: sysfs couldn't find the priv pointerEmmanuel Grumbach
This bug has been introduced by: d593411084a56124aa9d80aafa15db8463b2d8f7 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Mon Jul 11 10:48:51 2011 +0300 iwlagn: simplify the bus architecture Revert part of the buggy patch: dev_get_drvdata will now return iwl_priv as it did before the patch. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-13Revert "iwlagn: sysfs couldn't find the priv pointer"Emmanuel Grumbach
This reverts commit cc1a93e68f6c0d736b771f0746e8e4186f483fdc. This fix introduced a bug: bad pointer in unload. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-12drivers/net/wireless/wl12xx: add missing kfreeJulia Lawall
In each case, the freed data should be freed in the error handling code as well. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-11Bluetooth: cmtp: Fix session cleanup on failed conn addPeter Hurley
Once the session thread is running, cleanup must be handled by the session thread only. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: hidp: Don't release device ref if never heldPeter Hurley
When an hidp connection is added for a boot protocol input device, don't release a device reference that was never acquired. The device reference is acquired when the session is linked to the session list (which hasn't happened yet when hidp_setup_input is called). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: hidp: Only free input device if failed registerPeter Hurley
When an hidp connection is added for a boot protocol input device, only free the allocated device if device registration fails. Subsequent failures should only unregister the device (the input device api documents that unregister will also free the allocated device). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: hidp: Fix memory leak of cached report descriptorPeter Hurley
Free the cached HID report descriptor on thread terminate. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: hidp: Fix session cleanup on failed conn addPeter Hurley
Once the session thread is running, cleanup must be handled by the session thread only. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: cmtp: Fix deadlock in session deletionPeter Hurley
Commit fada4ac339 introduced the usage of kthread API. kthread_stop is a blocking function which returns only when the thread exits. In this case, the thread can't exit because it's waiting for the write lock, which is being held by cmtp_del_connection() which is waiting for the thread to exit -- deadlock. Revert cmtp_reset_ctr to its original behavior: non-blocking signalling for the session to terminate. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: bnep: Fix deadlock in session deletionPeter Hurley
Commit f4d7cd4a4c introduced the usage of kthread API. kthread_stop is a blocking function which returns only when the thread exits. In this case, the thread can't exit because it's waiting for the write lock, which is being held by bnep_del_connection() which is waiting for the thread to exit -- deadlock. Use atomic_t/wake_up_process instead to signal to the thread to exit. Signed-off-by: Jaikumar Ganesh <jaikumar@google.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: Don't use cmd_timer to timeout HCI reset commandSzymon Janc
No command should be send before Command Complete event for HCI reset is received. This fix regression introduced by commit 6bd32326cda(Bluetooth: Use proper timer for hci command timout) for chips whose reset command takes longer to complete (e.g. CSR) resulting in next command being send before HCI reset completed. Signed-off-by: Szymon Janc <szymon@janc.net.pl> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: Fixed wrong L2CAP Sock timer valueChen Ganir
L2CAP connection timeout needs to be assigned as miliseconds and not as jiffies. Signed-off-by: Chen Ganir <chen.ganir@ti.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: l2cap: Fix lost wakeup waiting for ERTM acksPeter Hurley
Fix race condition which can result in missing wakeup during l2cap socket shutdown. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: cmtp: Fix lost wakeup of session threadPeter Hurley
Fix race condition which can result in missing the wakeup intended to stop the session thread. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: bnep: Fix lost wakeup of session threadPeter Hurley
Fix race condition which can result in missing the wakeup intended to stop the session thread. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: sco: Fix lost wakeups waiting to accept socketPeter Hurley
Fix race conditions which can cause lost wakeups (or missed signals) while waiting to accept a sco socket connection. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: l2cap: Fix lost wakeups waiting to accept socketPeter Hurley
Fix race conditions which can cause lost wakeups (or misssed signals) while waiting to accept an l2cap socket connection. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: Fix lost wakeups waiting for sock state changePeter Hurley
Fix race conditions which can cause lost wakeups while waiting for sock state to change. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: rfcomm: Fix lost wakeups waiting to accept socketPeter Hurley
Fix race conditions which can cause lost wakeups (or missed signals) while waiting to accept an rfcomm socket connection. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: rfcomm: Remove unnecessary krfcommd eventPeter Hurley
Removed superfluous event handling which was used to signal that the rfcomm kthread had been woken. This appears to have been used to prevent lost wakeups. Correctly ordering when the task state is set to TASK_INTERRUPTIBLE is sufficient to prevent lost wakeups. To prevent wakeups which occurred prior to initially setting TASK_INTERRUPTIBLE from being lost, the main work of the thread loop - rfcomm_process_sessions() - is performed prior to sleeping. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: Add Toshiba laptops AR30XX device IDRicardo Mendoza
Blacklist Toshiba-branded AR3011 based AR5B195 [0930:0215] and add to ath3k.c for firmware loading. Signed-off-by: Ricardo Mendoza <ricmm@gentoo.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: btusb: be quiet on device disconnectPaul Bolle
Disabling the bluetooth usb device embedded in (some) ThinkPads tends to lead to errors like these: btusb_bulk_complete: hci0 urb ffff88011b9bfd68 failed to resubmit (19) btusb_intr_complete: hci0 urb ffff88011b46a318 failed to resubmit (19) btusb_bulk_complete: hci0 urb ffff88011b46a000 failed to resubmit (19) That is because usb_disconnect() doesn't "quiesces" pending urbs. Disconnecting a device is a normal thing to happen so it's no big deal that usb_submit_urb() returns -ENODEV. The simplest way to get rid of these errors is to stop treating that return as an error. Trivial, actually. While we're at it, add comments to be explicit about the reasons we're not complaining about -EPERM and -ENODEV. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: unlock if allocation fails in hci_blacklist_add()Dan Carpenter
There was a small typo here so we never actually hit the goto which would call hci_dev_unlock_bh(). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11rt2x00: fix crash in rt2800usb_get_txwiStanislaw Gruszka
Patch should fix this oops: BUG: unable to handle kernel NULL pointer dereference at 000000a0 IP: [<f81b30c9>] rt2800usb_get_txwi+0x19/0x70 [rt2800usb] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 Oops: 0000 [#1] SMP Pid: 198, comm: kworker/u:3 Tainted: G W 3.0.0-wl+ #9 LENOVO 6369CTO/6369CTO EIP: 0060:[<f81b30c9>] EFLAGS: 00010283 CPU: 1 EIP is at rt2800usb_get_txwi+0x19/0x70 [rt2800usb] EAX: 00000000 EBX: f465e140 ECX: f4494960 EDX: ef24c5f8 ESI: 810f21f5 EDI: f1da9960 EBP: f4581e80 ESP: f4581e70 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process kworker/u:3 (pid: 198, ti=f4580000 task=f4494960 task.ti=f4580000) Call Trace: [<f804790f>] rt2800_txdone_entry+0x2f/0xf0 [rt2800lib] [<c045110d>] ? warn_slowpath_common+0x7d/0xa0 [<f81b3a38>] ? rt2800usb_work_txdone+0x288/0x360 [rt2800usb] [<f81b3a38>] ? rt2800usb_work_txdone+0x288/0x360 [rt2800usb] [<f81b3a13>] rt2800usb_work_txdone+0x263/0x360 [rt2800usb] [<c046a8d6>] process_one_work+0x186/0x440 [<c046a85a>] ? process_one_work+0x10a/0x440 [<f81b37b0>] ? rt2800usb_probe_hw+0x120/0x120 [rt2800usb] [<c046c283>] worker_thread+0x133/0x310 [<c04885db>] ? trace_hardirqs_on+0xb/0x10 [<c046c150>] ? manage_workers+0x1e0/0x1e0 [<c047054c>] kthread+0x7c/0x90 [<c04704d0>] ? __init_kthread_worker+0x60/0x60 [<c0826b42>] kernel_thread_helper+0x6/0x1 Oops might happen because we check rt2x00queue_empty(queue) twice, but this condition can change and we can process entry in rt2800_txdone_entry(), which was already processed by rt2800usb_txdone_entry_check() -> rt2x00lib_txdone_noinfo() and has nullify entry->skb . Reported-by: Justin Piszcz <jpiszcz@lucidpixels.com> Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-11rt2x00: fix order of entry flags modificationStanislaw Gruszka
In rt2800usb_work_txdone we check flags in order: - ENTRY_OWNER_DEVICE_DATA - ENTRY_DATA_STATUS_PENDING - ENTRY_DATA_IO_FAILED Modify flags in separate order in rt2x00usb_interrupt_txdone, to avoid processing entries in _txdone with wrong flags or skip processing ready entries. Reported-by: Justin Piszcz <jpiszcz@lucidpixels.com> Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-11rt2x00: fix crash in rt2800usb_write_tx_descStanislaw Gruszka
Patch should fix this oops: BUG: unable to handle kernel NULL pointer dereference at 000000a0 IP: [<f8e06078>] rt2800usb_write_tx_desc+0x18/0xc0 [rt2800usb] *pdpt = 000000002408c001 *pde = 0000000024079067 *pte = 0000000000000000 Oops: 0000 [#1] SMP EIP: 0060:[<f8e06078>] EFLAGS: 00010282 CPU: 0 EIP is at rt2800usb_write_tx_desc+0x18/0xc0 [rt2800usb] EAX: 00000035 EBX: ef2bef10 ECX: 00000000 EDX: d40958a0 ESI: ef1865f8 EDI: ef1865f8 EBP: d4095878 ESP: d409585c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Call Trace: [<f8da5e85>] rt2x00queue_write_tx_frame+0x155/0x300 [rt2x00lib] [<f8da424c>] rt2x00mac_tx+0x7c/0x370 [rt2x00lib] [<c04882b2>] ? mark_held_locks+0x62/0x90 [<c081f645>] ? _raw_spin_unlock_irqrestore+0x35/0x60 [<c04884ba>] ? trace_hardirqs_on_caller+0x5a/0x170 [<c04885db>] ? trace_hardirqs_on+0xb/0x10 [<f8d618ac>] __ieee80211_tx+0x5c/0x1e0 [mac80211] [<f8d631fc>] ieee80211_tx+0xbc/0xe0 [mac80211] [<f8d63163>] ? ieee80211_tx+0x23/0xe0 [mac80211] [<f8d632e1>] ieee80211_xmit+0xc1/0x200 [mac80211] [<f8d63220>] ? ieee80211_tx+0xe0/0xe0 [mac80211] [<c0487d45>] ? lock_release_holdtime+0x35/0x1b0 [<f8d63986>] ? ieee80211_subif_start_xmit+0x446/0x5f0 [mac80211] [<f8d637dd>] ieee80211_subif_start_xmit+0x29d/0x5f0 [mac80211] [<f8d63924>] ? ieee80211_subif_start_xmit+0x3e4/0x5f0 [mac80211] [<c0760188>] ? sock_setsockopt+0x6a8/0x6f0 [<c0760000>] ? sock_setsockopt+0x520/0x6f0 [<c076daef>] dev_hard_start_xmit+0x2ef/0x650 Oops might happen because we perform parallel putting new entries in a queue (rt2x00queue_write_tx_frame()) and removing entries after finishing transmitting (rt2800usb_work_txdone()). There are cases when _txdone may process an entry that was not fully send and nullify entry->skb . To fix check in _txdone if entry has flags that indicate pending transmission and wait until flags get cleared. Reported-by: Justin Piszcz <jpiszcz@lucidpixels.com> Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-10drivers/net/wireless/wl1251: add missing kfreeJulia Lawall
In each case, the kfree already at the end of the function is also needed in the error case. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath5k: fix error handling in ath5k_beacon_sendBob Copeland
This cleans up error handling for the beacon in case of dma mapping failure. We need to free the skb when dma mapping fails instead of nulling and leaking the pointer, and we should bail out to avoid giving the hardware the bad descriptor. Finally, we need to perform the null check after trying to update the beacon, or else beacons will never be sent after a single mapping failure. Cc: stable@kernel.org Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09rt2x00: Add rt2870 device id for Dvico usb keyAnthony Bourguignon
This patch add a device id for the wifi usb keys shiped by DVICO with some of their tvix hardware. Signed-off-by: Anthony Bourguignon <contact+kernel@toniob.net> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath9k: fix a misprint which leads to incorrect calibrationAlex Hacker
This patch addresses an issue with incorrect HW register AR_PHY_TX_IQCAL_CORR_COEFF_B1 definition which leads to incorrect clibration. Cc: stable@kernel.org Signed-off-by: Alex Hacker <hacker@epn.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-28 00:57:27 +0000