aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-07-21ext4: fix ext4_get_group_number()Theodore Ts'o
commit 960fd856fdc3b08b3638f3f9b6b4bfceb77660c7 upstream. The function ext4_get_group_number() was introduced as an optimization in commit bd86298e60b8. Unfortunately, this commit incorrectly calculate the group number for file systems with a 1k block size (when s_first_data_block is 1 instead of zero). This could cause the following kernel BUG: [ 568.877799] ------------[ cut here ]------------ [ 568.877833] kernel BUG at fs/ext4/mballoc.c:3728! [ 568.877840] Oops: Exception in kernel mode, sig: 5 [#1] [ 568.877845] SMP NR_CPUS=32 NUMA pSeries [ 568.877852] Modules linked in: binfmt_misc [ 568.877861] CPU: 1 PID: 3516 Comm: fs_mark Not tainted 3.10.0-03216-g7c6809f-dirty #1 [ 568.877867] task: c0000001fb0b8000 ti: c0000001fa954000 task.ti: c0000001fa954000 [ 568.877873] NIP: c0000000002f42a4 LR: c0000000002f4274 CTR: c000000000317ef8 [ 568.877879] REGS: c0000001fa956ed0 TRAP: 0700 Not tainted (3.10.0-03216-g7c6809f-dirty) [ 568.877884] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 24000428 XER: 00000000 [ 568.877902] SOFTE: 1 [ 568.877905] CFAR: c0000000002b5464 [ 568.877908] GPR00: 0000000000000001 c0000001fa957150 c000000000c6a408 c0000001fb588000 GPR04: 0000000000003fff c0000001fa9571c0 c0000001fa9571c4 000138098c50625f GPR08: 1301200000000000 0000000000000002 0000000000000001 0000000000000000 GPR12: 0000000024000422 c00000000f33a300 0000000000008000 c0000001fa9577f0 GPR16: c0000001fb7d0100 c000000000c29190 c0000000007f46e8 c000000000a14672 GPR20: 0000000000000001 0000000000000008 ffffffffffffffff 0000000000000000 GPR24: 0000000000000100 c0000001fa957278 c0000001fdb2bc78 c0000001fa957288 GPR28: 0000000000100100 c0000001fa957288 c0000001fb588000 c0000001fdb2bd10 [ 568.877993] NIP [c0000000002f42a4] .ext4_mb_release_group_pa+0xec/0x1c0 [ 568.877999] LR [c0000000002f4274] .ext4_mb_release_group_pa+0xbc/0x1c0 [ 568.878004] Call Trace: [ 568.878008] [c0000001fa957150] [c0000000002f4274] .ext4_mb_release_group_pa+0xbc/0x1c0 (unreliable) [ 568.878017] [c0000001fa957200] [c0000000002fb070] .ext4_mb_discard_lg_preallocations+0x394/0x444 [ 568.878025] [c0000001fa957340] [c0000000002fb45c] .ext4_mb_release_context+0x33c/0x734 [ 568.878032] [c0000001fa957440] [c0000000002fbcf8] .ext4_mb_new_blocks+0x4a4/0x5f4 [ 568.878039] [c0000001fa957510] [c0000000002ef56c] .ext4_ext_map_blocks+0xc28/0x1178 [ 568.878047] [c0000001fa957640] [c0000000002c1a94] .ext4_map_blocks+0x2c8/0x490 [ 568.878054] [c0000001fa957730] [c0000000002c536c] .ext4_writepages+0x738/0xc60 [ 568.878062] [c0000001fa957950] [c000000000168a78] .do_writepages+0x5c/0x80 [ 568.878069] [c0000001fa9579d0] [c00000000015d1c4] .__filemap_fdatawrite_range+0x88/0xb0 [ 568.878078] [c0000001fa957aa0] [c00000000015d23c] .filemap_write_and_wait_range+0x50/0xfc [ 568.878085] [c0000001fa957b30] [c0000000002b8edc] .ext4_sync_file+0x220/0x3c4 [ 568.878092] [c0000001fa957be0] [c0000000001f849c] .vfs_fsync_range+0x64/0x80 [ 568.878098] [c0000001fa957c70] [c0000000001f84f0] .vfs_fsync+0x38/0x4c [ 568.878105] [c0000001fa957d00] [c0000000001f87f4] .do_fsync+0x54/0x90 [ 568.878111] [c0000001fa957db0] [c0000000001f8894] .SyS_fsync+0x28/0x3c [ 568.878120] [c0000001fa957e30] [c000000000009c88] syscall_exit+0x0/0x7c [ 568.878125] Instruction dump: [ 568.878130] 60000000 813d0034 81610070 38000000 7f8b4800 419e001c 813f007c 7d2bfe70 [ 568.878144] 7d604a78 7c005850 54000ffe 7c0007b4 <0b000000> e8a10076 e87f0090 7fa4eb78 [ 568.878160] ---[ end trace 594d911d9654770b ]--- In addition fix the STD_GROUP optimization so that it works for bigalloc file systems as well. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reported-by: Li Zhong <lizhongfs@gmail.com> Reviewed-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21ext4: fix overflow when counting used blocks on 32-bit architecturesJan Kara
commit 8af8eecc1331dbf5e8c662022272cf667e213da5 upstream. The arithmetics adding delalloc blocks to the number of used blocks in ext4_getattr() can easily overflow on 32-bit archs as we first multiply number of blocks by blocksize and then divide back by 512. Make the arithmetics more clever and also use proper type (unsigned long long instead of unsigned long). Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21ext4: fix data offset overflow in ext4_xattr_fiemap() on 32-bit archsJan Kara
commit a60697f411eb365fb09e639e6f183fe33d1eb796 upstream. On 32-bit architectures with 32-bit sector_t computation of data offset in ext4_xattr_fiemap() can overflow resulting in reporting bogus data location. Fix the problem by typing block number to proper type before shifting. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21ext4: fix overflows in SEEK_HOLE, SEEK_DATA implementationsJan Kara
commit e7293fd146846e2a44d29e0477e0860c60fb856b upstream. ext4_lblk_t is just u32 so multiplying it by blocksize can easily overflow for files larger than 4 GB. Fix that by properly typing the block offsets before shifting. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21ext4: fix data offset overflow on 32-bit archs in ext4_inline_data_fiemap()Jan Kara
commit eaf3793728d07d995f1e74250b2d0005f7ae98b5 upstream. On 32-bit archs when sector_t is defined as 32-bit the logic computing data offset in ext4_inline_data_fiemap(). Fix that by properly typing the shifted value. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21Btrfs: only do the tree_mod_log_free_eb if this is our last refJosef Bacik
commit 7fb7d76f96bfcbea25007d190ba828b18e13d29d upstream. There is another bug in the tree mod log stuff in that we're calling tree_mod_log_free_eb every single time a block is cow'ed. The problem with this is that if this block is shared by multiple snapshots we will call this multiple times per block, so if we go to rewind the mod log for this block we'll BUG_ON() in __tree_mod_log_rewind because we try to rewind a free twice. We only want to call tree_mod_log_free_eb if we are actually freeing the block. With this patch I no longer hit the panic in __tree_mod_log_rewind. Thanks, Reviewed-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21Btrfs: hold the tree mod lock in __tree_mod_log_rewindJosef Bacik
commit f1ca7e98a67da618d8595866e0860308525154da upstream. We need to hold the tree mod log lock in __tree_mod_log_rewind since we walk forward in the tree mod entries, otherwise we'll end up with random entries and trip the BUG_ON() at the front of __tree_mod_log_rewind. This fixes the panics people were seeing when running find /whatever -type f -exec btrfs fi defrag {} \; Thansk, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21Btrfs: fix estale with btrfs sendJosef Bacik
commit 139f807a1eba1e484941a98fb93ee32ad859a6a1 upstream. This fixes bugzilla 57491. If we take a snapshot of a fs with a unlink ongoing and then try to send that root we will run into problems. When comparing with a parent root we will search the parents and the send roots commit_root, which if we've just created the snapshot will include the file that needs to be evicted by the orphan cleanup. So when we find a changed extent we will try and copy that info into the send stream, but when we lookup the inode we use the normal root, which no longer has the inode because the orphan cleanup deleted it. The best solution I have for this is to check our otransid with the generation of the commit root and if they match just commit the transaction again, that way we get the changes from the orphan cleanup. With this patch the reproducer I made for this bugzilla no longer returns ESTALE when trying to do the send. Thanks, Reported-by: Chris Wilson <jakdaw@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21timer: Fix jiffies wrap behavior of round_jiffies_common()Bart Van Assche
commit 9e04d3804d3ac97d8c03a41d78d0f0674b5d01e1 upstream. Direct compare of jiffies related values does not work in the wrap around case. Replace it with time_is_after_jiffies(). Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Link: http://lkml.kernel.org/r/519BC066.5080600@acm.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21ahci: remove pmp link online check in FBS EHShane Huang
commit 912b9ac683b112615d5605686f1dc086402ce9f7 upstream. ata_link_online() check in ahci_error_intr() is unnecessary, it should be removed otherwise may lead to lockup with FBS enabled PMP. http://marc.info/?l=linux-ide&m=137050421603272&w=2 Reported-by: Yu Liu <liuyu.ac@gmail.com> Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21ahci: AHCI-mode SATA patch for Intel Coleto Creek DeviceIDsSeth Heasley
commit 1cfc7df3de10c40ed459e13cce6de616023bf41c upstream. This patch adds the AHCI-mode SATA DeviceIDs for the Intel Coleto Creek PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21ahci: Add AMD CZ SATA device IDShane Huang
commit fafe5c3d82a470d73de53e6b08eb4e28d974d895 upstream. To add AMD CZ SATA controller device ID of IDE mode. [bhelgaas: drop pci_ids.h update] Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21iwlwifi: pcie: wake the queue if stopped when being unmappedEmmanuel Grumbach
commit 8a487b1a7432b20ff3f82387a8ce7555a964b44e upstream. When the queue is unmapped while it was so loaded that mac80211's was stopped, we need to wake the queue after having freed all the packets in the queue. Not doing so can result in weird stuff like: * run lots of traffic (mac80211's queue gets stopped) * RFKILL * de-assert RFKILL * no traffic Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21iwlwifi: pcie: fix race in queue unmappingEmmanuel Grumbach
commit b967613d7e7c7bad176f5627c55e2d8c5aa2480e upstream. When a queue is disabled, it frees all its entries. Later, the op_mode might still get notifications from the firmware that triggers to free entries in the tx queue. The transport should be prepared for these races and know to ignore reclaim calls on queues that have been disabled and whose entries have been freed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21PCI: Fix refcount issue in pci_create_root_bus() error recovery pathJiang Liu
commit 343df771e671d821478dd3ef525a0610b808dbf8 upstream. After calling device_register(&bridge->dev), the bridge is reference- counted, and it is illegal to call kfree() on it except in the release function. [bhelgaas: changelog, use put_device() after device_register() failure] Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21PCI: Finish SR-IOV VF setup before adding the deviceXudong Hao
commit fbf33f516bdbcc2ab1ba1e54dfb720b0cfaa6874 upstream. Commit 4f535093cf "PCI: Put pci_dev in device tree as early as possible" moves device registering from pci_bus_add_devices() to pci_device_add(). That causes problems for virtual functions because device_add(&virtfn->dev) is called before setting the virtfn->is_virtfn flag, which then causes Xen to report PCI virtual functions as PCI physical functions. Fix it by setting virtfn->is_virtfn before calling pci_device_add(). [Jiang Liu]: Move the setting of virtfn->is_virtfn ahead further for better readability and modify changelog. Signed-off-by: Xudong Hao <xudong.hao@intel.com> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21nbd: correct disconnect behaviorPaul Clements
commit c378f70adbc1bbecd9e6db145019f14b2f688c7c upstream. Currently, when a disconnect is requested by the user (via NBD_DISCONNECT ioctl) the return from NBD_DO_IT is undefined (it is usually one of several error codes). This means that nbd-client does not know if a manual disconnect was performed or whether a network error occurred. Because of this, nbd-client's persist mode (which tries to reconnect after error, but not after manual disconnect) does not always work correctly. This change fixes this by causing NBD_DO_IT to always return 0 if a user requests a disconnect. This means that nbd-client can correctly either persist the connection (if an error occurred) or disconnect (if the user requested it). Signed-off-by: Paul Clements <paul.clements@steeleye.com> Acked-by: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21ocfs2: xattr: fix inlined xattr reflinkJunxiao Bi
commit ef962df057aaafd714f5c22ba3de1be459571fdf upstream. Inlined xattr shared free space of inode block with inlined data or data extent record, so the size of the later two should be adjusted when inlined xattr is enabled. See ocfs2_xattr_ibody_init(). But this isn't done well when reflink. For inode with inlined data, its max inlined data size is adjusted in ocfs2_duplicate_inline_data(), no problem. But for inode with data extent record, its record count isn't adjusted. Fix it, or data extent record and inlined xattr may overwrite each other, then cause data corruption or xattr failure. One panic caused by this bug in our test environment is the following: kernel BUG at fs/ocfs2/xattr.c:1435! invalid opcode: 0000 [#1] SMP Pid: 10871, comm: multi_reflink_t Not tainted 2.6.39-300.17.1.el5uek #1 RIP: ocfs2_xa_offset_pointer+0x17/0x20 [ocfs2] RSP: e02b:ffff88007a587948 EFLAGS: 00010283 RAX: 0000000000000000 RBX: 0000000000000010 RCX: 00000000000051e4 RDX: ffff880057092060 RSI: 0000000000000f80 RDI: ffff88007a587a68 RBP: ffff88007a587948 R08: 00000000000062f4 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000010 R13: ffff88007a587a68 R14: 0000000000000001 R15: ffff88007a587c68 FS: 00007fccff7f06e0(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000015cf000 CR3: 000000007aa76000 CR4: 0000000000000660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process multi_reflink_t Call Trace: ocfs2_xa_reuse_entry+0x60/0x280 [ocfs2] ocfs2_xa_prepare_entry+0x17e/0x2a0 [ocfs2] ocfs2_xa_set+0xcc/0x250 [ocfs2] ocfs2_xattr_ibody_set+0x98/0x230 [ocfs2] __ocfs2_xattr_set_handle+0x4f/0x700 [ocfs2] ocfs2_xattr_set+0x6c6/0x890 [ocfs2] ocfs2_xattr_user_set+0x46/0x50 [ocfs2] generic_setxattr+0x70/0x90 __vfs_setxattr_noperm+0x80/0x1a0 vfs_setxattr+0xa9/0xb0 setxattr+0xc3/0x120 sys_fsetxattr+0xa8/0xd0 system_call_fastpath+0x16/0x1b Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21arch: c6x: mm: include "asm/uaccess.h" to pass compilingChen Gang
commit fe74650166dd6905b0cf66594eb79222dc9d7109 upstream. Need include "asm/uaccess.h" to pass compiling. The related error (with allmodconfig): arch/c6x/mm/init.c: In function `paging_init': arch/c6x/mm/init.c:46:2: error: implicit declaration of function `set_fs' [-Werror=implicit-function-declaration] arch/c6x/mm/init.c:46:9: error: `KERNEL_DS' undeclared (first use in this function) arch/c6x/mm/init.c:46:9: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21Input: bcm5974 - add support for the 2013 MacBook AirDmitry Torokhov
commit 148c1c8ad3c4170186ebe6ea5900adde27d2a0e7 upstream. The June 2013 Macbook Air (13'') has a new trackpad protocol; four new values are inserted in the header, and the mode switch is no longer needed. This patch adds support for the new devices. Reported-and-tested-by: Brad Ford <plymouthffl@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21HID: apple: Add support for the 2013 Macbook AirDmitry Torokhov
commit 9d9a04ee758b4c1fcc7586d065cdde7a7607e156 upstream. This patch adds keyboard support for MacbookAir6,2 as WELLSPRING8 (0x0291, 0x0292, 0x0293). The touchpad is handled in a separate bcm5974 patch, as usual. Reported-and-tested-by: Brad Ford <plymouthffl@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21ACPI / PM: Fix corner case in acpi_bus_update_power()Rafael J. Wysocki
commit 91bdad0b6237c25a7bf8fd4604d0cc64a2005a23 upstream. The role of acpi_bus_update_power() is to update the given ACPI device object's power.state field to reflect the current physical state of the device (as inferred from the configuration of power resources and _PSC, if available). For this purpose it calls acpi_device_set_power() that should update the power resources' reference counters and set power.state as appropriate. However, that doesn't work if the "new" state is D1, D2 or D3hot and the the current value of power.state means D3cold, because in that case acpi_device_set_power() will refuse to transition the device from D3cold to non-D0. To address this problem, make acpi_bus_update_power() call acpi_power_transition() directly to update the power resources' reference counters and only use acpi_device_set_power() to put the device into D0 if the current physical state of it cannot be determined. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21ACPICA: Do not use extended sleep registers unless HW-reduced bit is setLv Zheng
commit 7cec7048fe22e3e92389da2cd67098f6c4284e7f upstream. Previous implementation incorrectly used the ACPI 5.0 extended sleep registers if they were simply populated. This caused problems on some non-HW-reduced machines. As per the ACPI spec, they should only be used if the HW-reduced bit is set. Lv Zheng, ACPICA BZ 1020. Reported-by: Daniel Rowe <bart@fathom13.com> References: https://bugzilla.kernel.org/show_bug.cgi?id=54181 References: https://bugs.acpica.org/show_bug.cgi?id=1020 Bisected-by: Brint E. Kriebel <kernel@bekit.net> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scanLan Tianyu
commit eff9a4b62b14cf0d9913e3caf1f26f8b7a6105c9 upstream. HP Folio 13's BIOS defines CMOS RTC Operation Region and the EC's _REG method will access that region. To allow the CMOS RTC region handler to be installed before the EC _REG method is first invoked, add ec_skip_dsdt_scan() as HP Folio 13's callback to ec_dmi_table. References: https://bugzilla.kernel.org/show_bug.cgi?id=54621 Reported-and-tested-by: Stefan Nagy <public@stefan-nagy.at> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21ACPI: Add CMOS RTC Operation Region handler supportLan Tianyu
commit 2fa97feb4406c546b52e35b6b6c50cb8f63425d2 upstream. On HP Folio 13-2000, the BIOS defines a CMOS RTC Operation Region and the EC's _REG methord accesses that region. Thus an appropriate address space handler must be registered for that region before the EC driver is loaded. Introduce a mechanism for adding CMOS RTC address space handlers. Register an ACPI scan handler for CMOS RTC devices such that, when a device of that kind is detected during an ACPI namespace scan, a common CMOS RTC operation region address space handler will be installed for it. References: https://bugzilla.kernel.org/show_bug.cgi?id=54621 Reported-and-tested-by: Stefan Nagy <public@stefan-nagy.at> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21drivers/rtc/rtc-rv3029c2.c: fix disabling AIE irqAxel Lin
commit 29ecd78c0fd6ee05f2c6b07b23823a6ae43c13ff upstream. In the disable AIE irq code path, current code passes "1" to enable parameter of rv3029c2_rtc_i2c_alarm_set_irq(). Thus it does not disable AIE irq. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21genirq: Fix can_request_irq() for IRQs without an actionBen Hutchings
commit 2779db8d37d4b542d9ca2575f5f178dbeaca6c86 upstream. Commit 02725e7471b8 ('genirq: Use irq_get/put functions'), inadvertently changed can_request_irq() to return 0 for IRQs that have no action. This causes pcibios_lookup_irq() to select only IRQs that already have an action with IRQF_SHARED set, or to fail if there are none. Change can_request_irq() to return 1 for IRQs that have no action (if the first two conditions are met). Reported-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is> Tested-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is> (against 3.2) Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: 709647@bugs.debian.org Link: http://bugs.debian.org/709647 Link: http://lkml.kernel.org/r/1372383630.23847.40.camel@deadeye.wl.decadent.org.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21xen/pcifront: Deal with toolstack missing 'XenbusStateClosing' state.Konrad Rzeszutek Wilk
commit 098b1aeaf4d6149953b8f1f8d55c21d85536fbff upstream. There are two tool-stack that can instruct the Xen PCI frontend and backend to change states: 'xm' (Python code with a daemon), and 'xl' (C library - does not keep state changes). With the 'xm', the path to disconnect a single PCI device (xm pci-detach <guest> <BDF>) is: 4(Connected)->7(Reconfiguring*)-> 8(Reconfigured)-> 4(Connected)->5(Closing*). The * is for states that the tool-stack sets. For 'xl', it is similar: 4(Connected)->7(Reconfiguring*)-> 8(Reconfigured)-> 4(Connected) Both of them also tear down the XenBus structure, so the backend state ends up going in the 3(Initialised) and calls pcifront_xenbus_remove. When a PCI device is plugged back in (xm pci-attach <guest> <BDF>) both of them follow the same pattern: 2(InitWait*), 3(Initialized*), 4(Connected*)->4(Connected). [xen-pcifront ignores the 2,3 state changes and only acts when 4 (Connected) has been reached] Note that this is for a _single_ PCI device. If there were two PCI devices and only one was disconnected 'xm' would show the same state changes. The problem is that git commit 3d925320e9e2de162bd138bf97816bda8c3f71be ("xen/pcifront: Use Xen-SWIOTLB when initting if required") introduced a mechanism to initialize the SWIOTLB when the Xen PCI front moves to Connected state. It also had some aggressive seatbelt code check that would warn the user if one tried to change to Connected state without hitting first the Closing state: pcifront pci-0: PCI frontend already installed! However, that code can be relaxed and we can continue on working even if the frontend is instructed to be the 'Connected' state with no devices and then gets tickled to be in 'Connected' state again. In other words, this 4(Connected)->5(Closing)->4(Connected) state was expected, while 4(Connected)->.... anything but 5(Closing)->4(Connected) was not. This patch removes that aggressive check and allows Xen pcifront to work with the 'xl' toolstack (for one or more PCI devices) and with 'xm' toolstack (for more than two PCI devices). Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org [v2: Added in the description about two PCI devices] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21xen/time: remove blocked time accounting from xen "clockchip"Laszlo Ersek
commit 0b0c002c340e78173789f8afaa508070d838cf3d upstream. ... because the "clock_event_device framework" already accounts for idle time through the "event_handler" function pointer in xen_timer_interrupt(). The patch is intended as the completion of [1]. It should fix the double idle times seen in PV guests' /proc/stat [2]. It should be orthogonal to stolen time accounting (the removed code seems to be isolated). The approach may be completely misguided. [1] https://lkml.org/lkml/2011/10/6/10 [2] http://lists.xensource.com/archives/html/xen-devel/2010-08/msg01068.html John took the time to retest this patch on top of v3.10 and reported: "idle time is correctly incremented for pv and hvm for the normal case, nohz=off and nohz=idle." so lets put this patch in. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: John Haxby <john.haxby@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21x86, efi: retry ExitBootServices() on failureZach Bobroff
commit d3768d885c6ccbf8a137276843177d76c49033a7 upstream. ExitBootServices is absolutely supposed to return a failure if any ExitBootServices event handler changes the memory map. Basically the get_map loop should run again if ExitBootServices returns an error the first time. I would say it would be fair that if ExitBootServices gives an error the second time then Linux would be fine in returning control back to BIOS. The second change is the following line: again: size += sizeof(*mem_map) * 2; Originally you were incrementing it by the size of one memory map entry. The issue here is all related to the low_alloc routine you are using. In this routine you are making allocations to get the memory map itself. Doing this allocation or allocations can affect the memory map by more than one record. [ mfleming - changelog, code style ] Signed-off-by: Zach Bobroff <zacharyb@ami.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21parisc: optimize mtsp(0,sr) inline assemblyHelge Deller
commit 92b59929825d67db575043a76651865d16873b36 upstream. If the value which should be moved into a space register is zero, we can optimize the inline assembly to become "mtsp %r0,%srX". Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21parisc: fix LMMIO mismatch between PAT length and MASK registerHelge Deller
commit dac76f1be5beaea4af9afe85fb475c73de0b8731 upstream. The LMMIO length reported by PAT and the length given by the LBA MASK register are not consistent. This leads e.g. to a not-working ATI FireGL card with the radeon DRM driver since the memory can't be mapped. Fix this by correctly adjusting the resource sizes. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21parisc: Ensure volatile space register %sr1 is not clobberedJohn David Anglin
commit e8d8fc219f9a0e63e7fb927881e6f4db8e7d34df upstream. I still see the occasional random segv on rp3440. Looking at one of these (a code 15), it appeared the problem must be with the cache handling of anonymous pages. Reviewing this, I noticed that the space register %sr1 might be being clobbered when we flush an anonymous page. Register %sr1 is used for TLB purges in a couple of places. These purges are needed on PA8800 and PA8900 processors to ensure cache consistency of flushed cache lines. The solution here is simply to move the %sr1 load into the TLB lock region needed to ensure that one purge executes at a time on SMP systems. This was already the case for one use. After a few days of operation, I haven't had a random segv on my rp3440. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21slab: fix init_lock_keysChristoph Lameter
commit 0f8f8094d28eb53368ac09186ea6b3a324cc7d44 upstream. Some architectures (e.g. powerpc built with CONFIG_PPC_256K_PAGES=y CONFIG_FORCE_MAX_ZONEORDER=11) get PAGE_SHIFT + MAX_ORDER > 26. In 3.10 kernels, CONFIG_LOCKDEP=y with PAGE_SHIFT + MAX_ORDER > 26 makes init_lock_keys() dereference beyond kmalloc_caches[26]. This leads to an unbootable system (kernel panic at initializing SLAB) if one of kmalloc_caches[26...PAGE_SHIFT+MAX_ORDER-1] is not NULL. Fix this by making sure that init_lock_keys() does not dereference beyond kmalloc_caches[26] arrays. Signed-off-by: Christoph Lameter <cl@linux.com> Reported-by: Tetsuo Handa <penguin-kernel@I-Love.SAKURA.ne.jp> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21parisc: Fix gcc miscompilation in pa_memcpy()Helge Deller
commit 5b879d78bc0818aa710f5d4d9abbfc2aca075cc3 upstream. When running the LTP testsuite one may hit this kernel BUG() with the write06 testcase: kernel BUG at mm/filemap.c:2023! CPU: 1 PID: 8614 Comm: writev01 Not tainted 3.10.0-rc7-64bit-c3000+ #6 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000401e6e84 00000000401e6e88 IIR: 03ffe01f ISR: 0000000010340000 IOR: 000001fbe0380820 CPU: 1 CR30: 00000000bef80000 CR31: ffffffffffffffff ORIG_R28: 00000000bdc192c0 IAOQ[0]: iov_iter_advance+0x3c/0xc0 IAOQ[1]: iov_iter_advance+0x40/0xc0 RP(r2): generic_file_buffered_write+0x204/0x3f0 Backtrace: [<00000000401e764c>] generic_file_buffered_write+0x204/0x3f0 [<00000000401eab24>] __generic_file_aio_write+0x244/0x448 [<00000000401eadc0>] generic_file_aio_write+0x98/0x150 [<000000004024f460>] do_sync_readv_writev+0xc0/0x130 [<000000004025037c>] compat_do_readv_writev+0x12c/0x340 [<00000000402505f8>] compat_writev+0x68/0xa0 [<0000000040251d88>] compat_SyS_writev+0x98/0xf8 Reason for this crash is a gcc miscompilation in the fault handlers of pa_memcpy() which return the fault address instead of the copied bytes. Since this seems to be a generic problem with gcc-4.7.x (and below), it's better to simplify the fault handlers in pa_memcpy to avoid this problem. Here is a simple reproducer for the problem: int main(int argc, char **argv) { int fd, nbytes; struct iovec wr_iovec[] = { { "TEST STRING ",32}, { (char*)0x40005000,32} }; // random memory. fd = open(DATA_FILE, O_RDWR | O_CREAT, 0666); nbytes = writev(fd, wr_iovec, 2); printf("return value = %d, errno %d (%s)\n", nbytes, errno, strerror(errno)); return 0; } In addition, John David Anglin wrote: There is no gcc PR as pa_memcpy is not legitimate C code. There is an implicit assumption that certain variables will contain correct values when an exception occurs and the code randomly jumps to one of the exception blocks. There is no guarantee of this. If a PR was filed, it would likely be marked as invalid. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21parisc: document the shadow registersHelge Deller
commit a83f58bcb24003b9de2364de7c829a263423ead7 upstream. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21cgroup: fix RCU accesses to task->cgroupsTejun Heo
commit 14611e51a57df10240817d8ada510842faf0ec51 upstream. task->cgroups is a RCU pointer pointing to struct css_set. A task switches to a different css_set on cgroup migration but a css_set doesn't change once created and its pointers to cgroup_subsys_states aren't RCU protected. task_subsys_state[_check]() is the macro to acquire css given a task and subsys_id pair. It RCU-dereferences task->cgroups->subsys[] not task->cgroups, so the RCU pointer task->cgroups ends up being dereferenced without read_barrier_depends() after it. It's broken. Fix it by introducing task_css_set[_check]() which does RCU-dereference on task->cgroups. task_subsys_state[_check]() is reimplemented to directly dereference ->subsys[] of the css_set returned from task_css_set[_check](). This removes some of sparse RCU warnings in cgroup. v2: Fixed unbalanced parenthsis and there's no need to use rcu_dereference_raw() when !CONFIG_PROVE_RCU. Both spotted by Li. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21cgroup: fix umount vs cgroup_event_remove() raceLi Zefan
commit 1c8158eeae0f37d0eee9f1fbe68080df6a408df2 upstream. commit 5db9a4d99b0157a513944e9a44d29c9cec2e91dc Author: Tejun Heo <tj@kernel.org> Date: Sat Jul 7 16:08:18 2012 -0700 cgroup: fix cgroup hierarchy umount race This commit fixed a race caused by the dput() in css_dput_fn(), but the dput() in cgroup_event_remove() can also lead to the same BUG(). Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21pcmcia: at91_cf: fix gpio_get_value in at91_cf_get_statusJoachim Eastwood
commit e39506b466edcda2a7e9d0174d7987ae654137b7 upstream. Commit 80af9e6d (pcmcia at91_cf: fix raw gpio number usage) forgot to change the parameter in gpio_get_value after adding gpio validation. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21drivers: hv: switch to use mb() instead of smp_mb()Jason Wang
commit 35848f68b07df3f917cb13fc3c134718669f569b upstream. Even if guest were compiled without SMP support, it could not assume that host wasn't. So switch to use mb() instead of smp_mb() to force memory barriers for UP guest. Signed-off-by: Jason Wang <jasowang@redhat.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21usb: host: xhci-plat: release mem region while removing moduleGeorge Cherian
commit 5388a3a5faba8dfa69e5f06c3a415d373c1a4316 upstream. Do a release_mem_region of the hcd resource. Without this the subsequent insertion of module fails in request_mem_region. Signed-off-by: George Cherian <george.cherian@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21xhci: check for failed dma pool allocationMathias Nyman
commit 025f880cb2e4d7218d0422d4b07bea1a68959c38 upstream. Fail and free the container context in case dma_pool_alloc() can't allocate the raw context data part of it This patch should be backported to kernels as old as 2.6.31, that contain the commit d115b04818e57bdbc7ccde4d0660b15e33013dc8 "USB: xhci: Support for 64-byte contexts". Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: John Youn <johnyoun@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21USB: ehci-omap: Tweak PHY initialization sequenceRoger Quadros
commit 4e5c9e6fa2d232a0686d5fe45cd1508484048936 upstream. For PHY mode, the PHYs must be brought out of reset before the EHCI controller is started. This patch fixes the issue where USB devices are not found on Beagleboard/Beagle-xm if USB has been started previously by the bootloader. (e.g. by "usb start" command in u-boot) Tested on Beagleboard, Beagleboard-xm and Pandaboard. Issue present on 3.10 onwards. Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21usb: gadget: f_mass_storage: add missing memory barrier for thread_wakeup_neededUCHINO Satoshi
commit d68c277b501889b3a50c179d1c3d704db7947b83 upstream. Without this memory barrier, the file-storage thread may fail to escape from the following while loop, because it may observe new common->thread_wakeup_needed and old bh->state which are updated by the callback functions. /* Wait for the CBW to arrive */ while (bh->state != BUF_STATE_FULL) { rc = sleep_thread(common); if (rc) return rc; } Signed-off-by: UCHINO Satoshi <satoshi.uchino@toshiba.co.jp> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21USB: option,qcserial: move Novatel Gobi1K IDs to qcserialDan Williams
commit a254810a86aaaac4ac6ba44fa934558b042a17a7 upstream. These devices are all Gobi1K devices (according to the Windows INF files) and should be handled by qcserial instead of option. Their network port is handled by qmi_wwan. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21pch_uart: Add uart_clk selection for the MinnowBoardDarren Hart
commit 29692d05647cb7ecea56242241f77291d5624b95 upstream. Use DMI_BOARD_NAME to determine if we are running on a MinnowBoard and set the uart clock to 50MHz if so. This removes the need to pass the user_uartclk to the kernel at boot time. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Waskiewicz <peter.p.waskiewicz.jr@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21ext4: check error return from ext4_write_inline_data_end()Theodore Ts'o
commit 42c832debbbf819f6c4ad8601baa559c44105ba4 upstream. The function ext4_write_inline_data_end() can return an error. So we need to assign it to a signed integer variable to check for an error return (since copied is an unsigned int). Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21ext3,ext4: don't mess with dir_file->f_pos in htree_dirblock_to_tree()Al Viro
commit 64cb927371cd2ec43758d8a094a003d27bc3d0dc upstream. Both ext3 and ext4 htree_dirblock_to_tree() is just filling the in-core rbtree for use by call_filldir(). All updates of ->f_pos are done by the latter; bumping it here (on error) is obviously wrong - we might very well have it nowhere near the block we'd found an error in. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21ext4: fix corruption when online resizing a fs with 1K block sizeMaarten ter Huurne
commit 6ca792edc13c409e8d4eb9001e048264c6a2eb64 upstream. Subtracting the number of the first data block places the superblock backups one block too early, corrupting the file system. When the block size is larger than 1K, the first data block is 0, so the subtraction has no effect and no corruption occurs. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21jbd2: fix theoretical race in jbd2__journal_restartTheodore Ts'o
commit 39c04153fda8c32e85b51c96eb5511a326ad7609 upstream. Once we decrement transaction->t_updates, if this is the last handle holding the transaction from closing, and once we release the t_handle_lock spinlock, it's possible for the transaction to commit and be released. In practice with normal kernels, this probably won't happen, since the commit happens in a separate kernel thread and it's unlikely this could all happen within the space of a few CPU cycles. On the other hand, with a real-time kernel, this could potentially happen, so save the tid found in transaction->t_tid before we release t_handle_lock. It would require an insane configuration, such as one where the jbd2 thread was set to a very high real-time priority, perhaps because a high priority real-time thread is trying to read or write to a file system. But some people who use real-time kernels have been known to do insane things, including controlling laser-wielding industrial robots. :-) Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-13 07:25:43 +0000