aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-03-06NFC: Core code identation fixesSamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: LLCP code identation fixesSamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Fix LLCP sockets releasing pathSamuel Ortiz
The socket local pointer needs to be set to NULL when the adapter is removed or the MAC goes down. If the socket release code is called after such an event, the socket reference count still needs to be decreased in order for the socket to eventually be freed. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Remove the rf mode parameter from the DEP link up routineSamuel Ortiz
When calling nfc_dep_link_up, we implicitely are in initiator mode. Which means we also can provide the general bytes as a function argument, as all drivers will eventually request them. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: SN is not an invalid GT valueSamuel Ortiz
We just don't do anything with it when parsing the general bytes. We handle it from the CONNECT reception code. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Unlink LLCP child sockets from llcp_sock_releaseSamuel Ortiz
The parent socket (the bound one) could be freed before its children, so we should unlink the children without trying to reach it through the parent. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Export NFCID when detecting a p2p target with pn533Samuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Export Jewel/Topaz ID from pn533Samuel Ortiz
The jewel ID is the NFCID1 for Topaz NFC tags. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Export sensf from pn533Samuel Ortiz
sensf is the detection response for Felica NFC tags. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Fragment LLCP I framesSamuel Ortiz
Based on the receiver MIU, we have to fragment the frame to be transmitted. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Set MIU and RW values from CONNECT and CC LLCP framesSamuel Ortiz
We use the maximum values for the LLCP Maximum Information Unit and Receive Window Size. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Send LLCP RR frames to acknowledge received I framesSamuel Ortiz
In order to acknowledge an I frame, we have to either queue pending local I frames or queue a receiver ready frame. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Set the right LLCP N(R) value for I framesSamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Clear LLCP SDPs whan MAC goes downSamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Clear pn533 target structureSamuel Ortiz
The polled target structure should be memset to 0 in order to avoid sel_res and sens_res garbage. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Fix bitops usage in LLCPSamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: LLCP socket sendmsg implemetationSamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Handle Receiver Not Ready LLCP frameSamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Factorize the I frame queueing routineSamuel Ortiz
This one will be called from the I frame command sending. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Add device powered netlink attributeSamuel Ortiz
For user space to know if a device is up or down. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Export NFCID1 from pn533Samuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06bcma: add support for on-chip OTP memory used for SPROM storageArend van Spriel
Wireless Broadcom chips can have either their SPROM data stored on either external SPROM or on-chip OTP memory. Both are accessed through the same register space. This patch adds support for the on-chip OTP memory. Tested with: BCM43224 OTP and SPROM BCM4331 SPROM BCM4313 OTP This patch is in response to linux-wireless thread [1]. [1] http://article.gmane.org/gmane.linux.kernel.wireless.general/85426 Tested-by: Saul St. John <saul.stjohn@gmail.com> Tested-by: Rafal Milecki <zajec5@gmail.com> Tested-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06bcma: return error in bcma_sprom_get() when fallback failsArend van Spriel
When not SPROM is available a fallback mechanism is used. However, when that fails the code currently continues. This patch assures that the bcma_sprom_get() function aborts when that happens. Cc: Rafal Milecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06ath5k: do not re-run AGC calibration periodicallyFelix Fietkau
All other Atheros drivers run the AGC gain calibration and DC offset calibration only after reset. Running them periodically has caused stability issues on some (primarily AR2315/2413/5413/5414 based) devices, leading to messages such as: ath5k phy0: gain calibration timeout (2462MHz) ath5k phy0: calibration of channel 11 failed Related bug reports: https://dev.openwrt.org/ticket/10574 https://bugzilla.redhat.com/show_bug.cgi?id=795141 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06ath5k: do not stop queues for full calibrationFelix Fietkau
Some calibration types interfere with tx activity, but the queue stop does not prevent that. In fact, some calibration types need tx activity to properly function, so stopping the queues for them is counterproductive. In some tests this patch has been shown to improve stability, especially in AP or ad-hoc mode. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06mac80211: Modify tsf via debugfs in mesh interfacesJavier Cardona
Signed-off-by: Javier Cardona <javier@cozybit.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06mac80211_hwsim: Add tsf to beacons, probe responses and radiotap header.Javier Cardona
Generate a tsf from internal kernel clock. Prepare the path for having different tsf offsets on each phy. This will be useful for testing mesh synchronization algorithms. Signed-off-by: Javier Cardona <javier@cozybit.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06mac80211: fix mesh airtime link metric estimatingThomas Pedersen
Airtime link metric estimation was broken in HT mesh, use cfg80211_calculate_bitrate to get the right rate value. Also factor out tx rate copying from sta_set_sinfo(). Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06cfg80211: expose cfg80211_calculate_bitrate()Thomas Pedersen
Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: move firmware completion waitJohannes Berg
This doesn't belong into the op_mode, it has to be in the drv stop flow instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: move firmware request into drvJohannes Berg
Firmware request is a base driver flow, it isn't related to any specific mode. Move the code related to it into the base driver file iwl-drv.c. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: move iwl_base_params to shared headerJohannes Berg
This is used from there, so should be in it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: move uCode deallocation to drvJohannes Berg
This shouldn't be in the op_mode, as it will later be switchable at runtime. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: fix station HT parametersJohannes Berg
My patch "iwlwifi: simplify auth/assoc flow" caused a serious throughput degradation due to me forgetting that there are HT settings in the station table. To restore throughput, set these parameters correctly when the sta moves to assoc state. This patch should probably be merged with the auth/assoc redesign patch for upstream. In that case, this paragraph should be added to the commit log as the third paragraph (before talking about RXON): However, as we only get the station HT data when the station moves into assoc state, we also need to program this into the device (and copy it into our database) then. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: move traffic log definitionsJohannes Berg
These are DVM specific, and shouldn't be in iwl-shared.h. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: move IWL_MASK into file using itJohannes Berg
Only used in two places in the same file, no need to be in iwl-shared.h. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: move tid_to_ac to PCI-EJohannes Berg
Currently, queue mapping is handled in the transport. This may change, but until then the code for it can be close to where it's used rather than in iwl-shared.h. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: iwl_rx_cmd_buffer belongs to transport APIJohannes Berg
This is how the transport passes things up into higher layers, so it belongs to the transport API. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: move queue functions to PCI-EJohannes Berg
iwl_queue_inc_wrap/iwl_queue_dec_wrap aren't shared functions, they are PCI-E specific, so move them into the appropriate header. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: transport's tx_agg_alloc must not sleepJohannes Berg
The annotation/documentation is wrong, we call it in a context that can't sleep. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: refactor PCI-E RX pathJohannes Berg
Just make the code easier to read with less indentation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: don't pass iwl_rx_mem_buffer to upper layersJohannes Berg
struct iwl_rx_mem_buffer implementation details (DMA address, list pointers) that the upper layers don't need. Introduce iwl_rx_cmd_buffer that is passed upstream and only contains the needed data (the page). Additionally, access this data only via accessor functions, allowing us to change the implementation in the future. These accessors are rxb_addr() (as before) and rxb_steal_page() to take ownership of the data. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: pass response packet directlyJohannes Berg
When CMD_WANT_SKB is set for a (synchronous) command, the response is passed back to the caller which is then responsible for freeing it. Make this more abstract with real API, passing directly the response packet in the new cmd.resp_pkt member and also introduce iwl_free_resp() to free the pages -- this way the upper layers don't have to directly touch the page implementation. NOTE: This breaks IDI -- the new code isn't reflected there yet! Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: use ieee80211_tx_statusJohannes Berg
We currently use the _irqsafe version, but that isn't recommended together with ieee80211_rx() as it can cause races. If the device reports a TX-status and RX in that order then with the current combination mac80211 might process them in the other order, which can cause issues with powersaving clients. Use ieee80211_tx_status() to avoid this race. Since we don't want to call it with locks held, process the frame queues later -- this is fine as they are on the stack. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: move wowlan bool into privJohannes Berg
With the new WoWLAN flow into the transport there no longer is a need for this to be shared, so move it into priv. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: clean up (wowlan) suspend flowJohannes Berg
In the WoWLAN suspend flow, instead of accessing registers directly, ask the transport to do the required setup at the end of suspend. If the transport doesn't implement this, don't tell the stack we support WoWLAN. When the device suspends w/o WoWLAN, mac80211 will have stopped it already, which has already called iwl_apm_stop() via stop_hw(). Thus, it isn't necessary to call it again in pcie_suspend and we can simply do nothing there. This unifies the regular and WoWLAN suspend. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: reduce IDI code ifdefJohannes Berg
The code in the two branches of the #ifdef is almost the same so move the common code outside the #ifdef. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: make config constJohannes Berg
Writing to the global config structures is always wrong. To protect against such mistakes in the future, mark them const. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: use valid TX/RX antenna from hw_paramsJohannes Berg
It's not really a good idea to write to the global static configuration. Use the valid TX/RX antenna information only from the HW params struct except in the case where the values from the config are used to override the values from the EEPROM. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: remove SKU from configJohannes Berg
There's no SKU override, we always just use it from EEPROM. As such, we can remove it from the config and use it in hw_param only. Since iwl_eeprom_check_sku() really needs to fill it in also rename that to iwl_eeprom_init_hw_params(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-13 09:36:17 +0000