aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-at91/at91sam9261.c
AgeCommit message (Collapse)Author
2012-12-13Merge tag 'sound-3.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This update contains a fairly wide range of changes all over in sound subdirectory, mainly because of UAPI header moves by David and __dev* annotation removals by Bill. Other highlights are: - Introduced the support for wallclock timestamps in ALSA PCM core - Add the poll loop implementation for HD-audio jack detection - Yet more VGA-switcheroo fixes for HD-audio - New VIA HD-audio codec support - More fixes on resource management in USB audio and MIDI drivers - More quirks for USB-audio ASUS Xonar U3, Reloop Play, Focusrite, Roland VG-99, etc - Add support for FastTrack C400 usb-audio - Clean ups in many drivers regarding firmware loading - Add PSC724 Ultiimate Edge support to ice1712 - A few hdspm driver updates - New Stanton SCS.1d/1m FireWire driver - Standardisation of the logging in ASoC codes - DT and dmaengine support for ASoC Atmel - Support for Wolfson ADSP cores - New drivers for Freescale/iVeia P1022 and Maxim MAX98090 - Lots of other ASoC driver fixes and developments" Fix up trivial conflicts. And go out on a limb and assume the dts file 'status' field of one of the conflicting things was supposed to be "disabled", not "disable" like in pretty much all other cases. * tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits) ALSA: hda - Move runtime PM check to runtime_idle callback ALSA: hda - Add stereo-dmic fixup for Acer Aspire One 522 ALSA: hda - Avoid doubly suspend after vga switcheroo ALSA: usb-audio: Enable S/PDIF on the ASUS Xonar U3 ALSA: hda - Check validity of CORB/RIRB WP reads ALSA: hda - use usleep_range in link reset and change timeout check ALSA: HDA: VIA: Add support for codec VT1808. ALSA: HDA: VIA Add support for codec VT1705CF. ASoC: codecs: remove __dev* attributes ASoC: utils: remove __dev* attributes ASoC: ux500: remove __dev* attributes ASoC: txx9: remove __dev* attributes ASoC: tegra: remove __dev* attributes ASoC: spear: remove __dev* attributes ASoC: sh: remove __dev* attributes ASoC: s6000: remove __dev* attributes ASoC: OMAP: remove __dev* attributes ASoC: nuc900: remove __dev* attributes ASoC: mxs: remove __dev* attributes ASoC: kirkwood: remove __dev* attributes ...
2012-12-12Merge tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC Header cleanups from Olof Johansson: "This is a collection of header file cleanups, mostly for OMAP and AT91, that keeps moving the platforms in the direction of multiplatform by removing the need for mach-dependent header files used in drivers and other places." Fix up mostly trivial conflicts as per Olof. * tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits) ARM: OMAP2+: Move iommu/iovmm headers to platform_data ARM: OMAP2+: Make some definitions local ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h ARM: OMAP2+: Move iopgtable header to drivers/iommu/ ARM: OMAP: Merge iommu2.h into iommu.h atmel: move ATMEL_MAX_UART to platform_data/atmel.h ARM: OMAP: Remove omap_init_consistent_dma_size() arm: at91: move at91rm9200 rtc header in drivers/rtc arm: at91: move reset controller header to arm/arm/mach-at91 arm: at91: move pit define to the driver arm: at91: move at91_shdwc.h to arch/arm/mach-at91 arm: at91: move board header to arch/arm/mach-at91 arn: at91: move at91_tc.h to arch/arm/mach-at91 arm: at91 move at91_aic.h to arch/arm/mach-at91 arm: at91 move board.h to arch/arm/mach-at91 arm: at91: move platfarm_data to include/linux/platform_data/atmel.h arm: at91: drop machine defconfig ARM: OMAP: Remove NEED_MACH_GPIO_H ARM: OMAP: Remove unnecessary mach and plat includes ...
2012-11-11Merge branch 'at91' into develLinus Walleij
2012-11-07ARM: at91: atmel-ssc: add device tree supportBo Shen
Add atmel-ssc for device tree support Match "atmel,at91rm9200-ssc" for using pdc for data transfer Match "atmel,at91sam9g45-ssc" for using dma for data transfer Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-06arm: at91: move reset controller header to arm/arm/mach-at91Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-06arm: at91 move at91_aic.h to arch/arm/mach-at91Jean-Christophe PLAGNIOL-VILLARD
as this is only used board old style board old mach code Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-06ARM: at91: atmel-ssc: add platform device id tableBo Shen
Add platform device id to check whether the SSC controller support pdc or dam for data transfer If match "at91rm9200_ssc", which support pdc for data transfer If match "at91sam9g45_ssc", which support dma for data transfer Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-24ARM: at91/i2c: change id to let i2c-at91 workBo Shen
The i2c core driver will turn the platform device ID to busnum When using platfrom device ID as -1, it means dynamically assigned the busnum. When writing code, we need to make sure the busnum, and call i2c_register_board_info(int busnum, ...) to register device if using -1, we do not know the value of busnum In order to solve this issue, set the platform device ID as a fix number Here using 0 to match the busnum used in i2c_regsiter_board_info() Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
2012-10-13arm: at91: use macro to declare soc boot dataJean-Christophe PLAGNIOL-VILLARD
Instead of check the pointer of the init function, check the new builtin bool to known if the soc is enabled. This is needed as with the switch to the pinctrl the init will be NULL on pure DT SoC. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-09-12i2c: at91: add new driverNikolaus Voss
This driver has the following properties compared to the old driver: 1. Support for multiple interfaces. 2. Interrupt driven I/O as opposed to polling/busy waiting. 3. Support for _one_ repeated start (Sr) condition, which is enough for most real-world applications including all SMBus transfer types. (The hardware does not support issuing arbitrary Sr conditions on the bus.) testing: SoC: at91sam9g45 - BQ20Z80 battery SMBus client. - on a 2.6.38 kernel with several i2c clients (temp-sensor, audio-codec, touchscreen-controller, w1-bridge, io-expanders) Signed-off-by: Nikolaus Voss <n.voss@weinmann.de> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Hubert Feurstein <h.feurstein@gmail.com> Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com> [wsa: squashed with the following patches from Ludovic to have some flaws fixed: i2c: at91: use managed resources i2c: at91: add warning about transmission issues for some devices i2c: at91: use an id table for SoC dependent parameters ] Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12Replace clk_lookup.con_id with clk_lookup.dev_id entries for twi clkNikolaus Voss
The old driver used con_id clock entries. Convert to use dev_id for clock lookup via standard method. Signed-off-by: Nikolaus Voss <n.voss@weinmann.de> Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-07-02ARM: at91: sparse irq supportLudovic Desroches
Enable sparse irq support for multisoc image. It involves to add the NR_IRQS_LEGACY offset to static SoC irq number definitions since NR_IRQS_LEGACY irq descs are allocated before AIC requests irq descs allocation. Move NR_AIC_IRQS macro to a more appropiate place with the purpose to remove mach/irqs.h later. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-17ARM: at91: drop at91_set_serial_consoleJean-Christophe PLAGNIOL-VILLARD
at91_set_serial_console is used to define the default console of linux. This is already manage by the cmdline. And if the boot loader can not be modified you can still set it by enabling the CONFIG_CMDLINE_EXTEND option. And then the command-line arguments provided by the boot loader will be appended to the default kernel command string. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-28Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
2012-03-28Disintegrate asm/system.h for ARMDavid Howells
Disintegrate asm/system.h for ARM. Signed-off-by: David Howells <dhowells@redhat.com> cc: Russell King <linux@arm.linux.org.uk> cc: linux-arm-kernel@lists.infradead.org
2012-02-23ARM: at91: make sdram/ddr register base soc independentJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91: make matrix register base soc independentJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Ryan Mallon <rmallon@gmail.com> Cc: linux-usb@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-17ARM: at91: factorise duplicated at91sam9 idleJean-Christophe PLAGNIOL-VILLARD
Remove duplicated at91sam9xxxx_idle() functions introduced by commit c9dfafb "ARM: mach-at91: move special idle code out of line". Replace by a generic at91sam9_idle() function in setup.c common location. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-07Merge tag 'v3.3-rc2' into depends/rmk/for-armsocOlof Johansson
There were conflicts between fixes going in after 3.3-rc1 and Russell's stable arm-soc base branch. Resolving it in the dependency branch so that each topic branch shares the same resolution. Conflicts: arch/arm/mach-at91/at91cap9.c arch/arm/mach-at91/at91sam9g45.c
2012-01-20ARM: mach-at91: move special idle code out of lineNicolas Pitre
... and hook it to arm_pm_idle. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2012-01-20ARM: at91: make rstc soc independentJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-01-07Merge branch 'depends/rmk/restart' into next/cleanupArnd Bergmann
Conflicts: arch/arm/mach-at91/at91cap9.c arch/arm/mach-at91/at91sam9260.c arch/arm/mach-at91/at91sam9261.c arch/arm/mach-at91/at91sam9263.c arch/arm/mach-at91/at91sam9g45.c arch/arm/mach-at91/at91sam9rl.c arch/arm/mach-exynos/cpu.c arch/arm/mach-shmobile/board-kota2.c This resolves a bunch of conflicts between the arm-soc tree and changes from the arm tree that have gone upstream. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-05ARM: restart: at91: use new restart hookRussell King
Rather than using a private function pointer, use the existing arm_pm_restart function pointer instead. We no longer need to enable the I-cache in at91sam9_alt_reset() as the caches will now be on when this function is called. Update the function names to use the 'restart' terminology rather than the 'reboot' terminology. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-29ARM: at91: gpio make struct at91_gpio_bank an initdataJean-Christophe PLAGNIOL-VILLARD
this will simplify the switch to the DT and later to the platform_device Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-29ARM: at91: switch gpio clock to clkdevJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-28ARM: at91: make shutdown controler soc independentJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-28ARM: at91: make smc register base soc independentJean-Christophe PLAGNIOL-VILLARD
now sam9_smc_configure will take as first parameter is the SMC id Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-28ARM: at91: make pit register base soc independentJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-28ARM: at91: add ioremap_registers entry point to soc setupJean-Christophe PLAGNIOL-VILLARD
this will allow to ioremap the register of the PIT, PMC and others and make the code soc independent Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-28ARM: at91: make gpio register base soc independantJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Ryan Mallon <rmallon@gmail.com>
2011-10-07Merge branches 'sirf/devel', 'at91/devel', 'imx/devel' and 'davinci/devel' ↵Arnd Bergmann
into next/devel
2011-09-10at91: ohci-at91: always provide all the clocksJean-Christophe PLAGNIOL-VILLARD
Remove the cpu_is_at91xxxx() macros in the ohci-at91 driver. SoCs at91sam9261 and at91sam9g10 expect one additional clock: hck0. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-08-24at91: at91sam9261.c: fix typo in t2_clk alias for atmel_tcb.0Jean-Christophe PLAGNIOL-VILLARD
This was a typo in clockdev declaration for at91sam9261 SoC. Fix the kernel hanging when switching clocksource to TC (tcb_clksrc). Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Remy Bohmer <linux@bohmer.net> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-07-28at91: factorize sram initJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-07-28at91: move register clocks to soc generic initJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-07-28at91: move clock subsystem init to soc generic initJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-07-28at91: use structure to store the current socJean-Christophe PLAGNIOL-VILLARD
instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-07-28at91: factorize at91 interrupts init to socJean-Christophe PLAGNIOL-VILLARD
they are the same except the default priority Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-07-28at91: introduce commom AT91_BASE_SYSJean-Christophe PLAGNIOL-VILLARD
On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-05-25at91: switch to CLKDEV_LOOKUPJean-Christophe PLAGNIOL-VILLARD
we do not change the clock naming convention so does not need to switch the AVR32 yet Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-05-25at91: fix map_io init usageJean-Christophe PLAGNIOL-VILLARD
switch early init to init_early and introduce soc map_io with this Patch we will not do any more early device setup during the map io tks to Russell to point the new call back Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Andrew Victor <linux@maxim.org.za>
2010-10-26AT91: reset: extend alternate reset procedure to several chipsNicolas Ferre
Several at91sam9 chips need the alternate reset procedure to be sure to halt SDRAM smoothly before resetting the chip. This is an extension of previous patch "Fix AT91SAM9G20 reset" to all chips affected. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2009-07-02[ARM] 5570/1: at91: Support for at91sam9g10: core chip & board supportNicolas Ferre
From: Hong Xu <hong.xu@atmel.com> Here are the modification to at91sam9261 files dedicated to the support of at91sam9g10. This direction has been adopted to minimize code duplication. All at91sam9261 drivers are enabled in _devices and board- files. Modificaton to peripherals that support at91sam9g10 will be added in future patches. Signed-off-by: Hong Xu <hong.xu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-08[ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, ↵Russell King
pxa, s3c arch/arm/mach-at91/at91cap9.c:337: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91rm9200.c:301: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9260.c:351: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9261.c:287: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9263.c:312: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9rl.c:304: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-h720x/h7202-eval.c:38: error: implicit declaration of function 'IRQ_CHAINED_GPIOB' arch/arm/mach-ks8695/devices.c:46: error: 'KS8695_IRQ_WAN_RX_STATUS' undeclared here (not in a function) arch/arm/mach-msm/devices.c:28: error: 'INT_UART1' undeclared here (not in a function) arch/arm/mach-mx2/devices.c:233: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function) arch/arm/mach-mx3/devices.c:128: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:140: error: 'INT_730_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:165: error: 'INT_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:200: error: 'INT_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap2/board-apollon.c:286: error: implicit declaration of function 'omap_set_gpio_direction' arch/arm/mach-omap2/mcbsp.c:154: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function) arch/arm/mach-omap2/mcbsp.c:181: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function) arch/arm/mach-pxa/e350.c:36: error: 'IRQ_BOARD_START' undeclared here (not in a function) arch/arm/plat-s3c/dev-i2c0.c:32: error: 'IRQ_IIC' undeclared here (not in a function) ... Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04[ARM] 4903/1: [AT91] SAM9/CAP9 system shutdownAndrew Victor
Enable system shutdown/power-off on AT91SAM9 and AT91CAP9 based boards. This does not require power-management to be enabled, and the pm_power_off method can be overridden in board-specific files if necessary. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26[ARM] 4656/1: AT91: Tweak interrupt prioritiesAndrew Victor
Slight tweaking of the default interrupt priorities (AIC) for the integrated peripherals on the AT91RM9200, AT91SAM9260, AT91SAM9261 and AT91SAM9263 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-03[ARM] 4351/1: AT91: Define rest of peripheral clocksAndrew Victor
Define and register the remaining peripheral clocks for the AT91 processors. AT91SAM9261 clocks patch by Ivan Zhakov. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-16[ARM] at91: correct value for AT91_RSTC_KEYJan Altenberg
- Remove a duplicated define for AT91_RSTC_KEY - Set AT91_RSTC_KEY to the correct value - Replace the hardcoded keys in at91sam9620.c and at91sam9261.c by AT91_RSTC_KEY Signed-off-by: Jan Altenberg <jan@linutronix.de> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-08[ARM] 4147/1: AT91: Define Timer/Counter clocks.Andrew Victor
Define the Timer/Counter Unit clocks on the AT91RM9200, AT91SAM9260 and AT91SAM9261 processors. Original patch from David Brownell. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-01 16:11:44 +0000