aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-shmobile/Kconfig
AgeCommit message (Collapse)Author
2012-01-10Merge branches 'rmobile/kota2' and 'rmobile/marzen' into rmobile-latestPaul Mundt
Conflicts: arch/arm/mach-shmobile/Kconfig arch/arm/mach-shmobile/Makefile Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-09ARM: mach-shmobile: r8a7779 PFC GPIO-only support V2Magnus Damm
Add GPIO-only r8a7779 PFC support V2. Only regular GPIOs are supported at this time. GPIO_FN are not supported because they require variable bit width support in be the shared pfc code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-09ARM: mach-shmobile: r8a7779 and Marzen base support V2Magnus Damm
Initial support for the r8a7779 SoC and the Marzen board (V2). Only SCIF ports and the TMU are supported at this point. To keep things simple only entity-mapped virt-to-phys mappings are supported. This forces drivers and other SoC glue code to make use of ioremap(). We cannot support early serial console due to virtual address space collisions with the ARM kernel. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: add bonito board support.Kuninori Morimoto
This adds basic bonito board (R-Mobile A1) support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: r8a7740: add INTC supportKuninori Morimoto
R8A7740 GIC can not get external IRQx interrupt directly without GIC - INTC demux support. Current AG5 is using GIC - INTCS demux with special irq relocation. but GIC - INTCA demux is still not supported and it needs irq number re-mapping. OTOH, normal INTC support as before is very enough for R8A7740, because it is not SMP CPU. This patch adds INTCA/INTCS support instead of GIC. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: R-Mobile A1 support.Kuninori Morimoto
This adds preliminary support for the R8A7740 (R-Mobile A1) CPU Timer, serial, gic, clock are supported at this point. This patch is based on v0.1 manual Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-05ARM: mach-shmobile: ag5evm needs CONFIG_I2CGuennadi Liakhovetski
ag5evm implements a backlight control, using an I2C controller, therefore it needs CONFIG_I2C to fix this make failure arch/arm/mach-shmobile/built-in.o: In function `lcd_on': pfc-sh73a0.c:(.text+0x2334): undefined reference to `i2c_get_adapter' pfc-sh73a0.c:(.text+0x2370): undefined reference to `i2c_transfer' (ignore pfc-sh73a0.c) and to build successfully. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-29ARM: mach-shmobile: Kota2 SCIFA2 and SMSC911X supportMagnus Damm
Kota2 base board support including the on-chip SCIFA2 serial console and the on-board SMSC911X ethernet port. The s73a0 SMP bits are also updated to include Kota2. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-20ARM: mach-shmobile: AG5EVM LCDC / MIPI-DSI platform dataMagnus Damm
Add platform data for MIPI-DSI and LCDC on the AG5EVM board. The sh73a0 clkdev bindings are also updated. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-14ARM: mach-shmobile: ag5evm requires GPIOLIBYoshii Takashi
Because ag5evm board setup code uses gpio functions, ARCH_REQUIRE_GPIOLIB should be set in Kconfig. Otherwise, the first build with defconfig fails. Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-05Merge branches 'rmobile/mmcif', 'rmobile/ag5' and 'rmobile/mackerel' into ↵Paul Mundt
rmobile-latest Conflicts: arch/arm/mach-shmobile/Kconfig Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22ARM: mach-shmobile: mackerel: fixup default memory sizeKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-30Merge branch 'rmobile/mackerel' into rmobile-latestPaul Mundt
Conflicts: arch/arm/mach-shmobile/Kconfig arch/arm/mach-shmobile/Makefile Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-29ARM: mach-shmobile: Add mackerel board supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-19ARM: mach-shmobile: ag5evm: use gpio.Takashi YOSHII
Ag5evm board now uses gpio api to initialize pins and peripherals. Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-19ARM: mach-shmobile: Add sh73a0 pinmux supportTakashi YOSHII
PFC definitions for sh73a0 to support GPIO and pinmux handling. Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-18ARM: mach-shmobile: Initial AG5 and AG5EVM supportMagnus Damm
This patch adds initial support for Renesas SH-Mobile AG5. At this point the AG5 CPU support is limited to the ARM core, SCIF serial and a CMT timer together with L2 cache and the GIC. The AG5EVM board also supports Ethernet. Future patches will add support for GPIO, INTCS, CPGA and platform data / driver updates for devices such as IIC, LCDC, FSI, KEYSC, CEU and SDHI among others. The code in entry-macro.S will be cleaned up when the ARM IRQ demux code improvements have been merged. Depends on the AG5EVM mach-type recently registered but not yet present in arch/arm/tools/mach-types. As the AG5EVM board comes with 512MiB memory it is recommended to turn on HIGHMEM. Many thanks to Yoshii-san for initial bring up. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-16ARM: mach-shmobile: Tidy up the Kconfig bits.Paul Mundt
Presently each one of the CPUs manually selects the same feature set, and there's a reasonable expectation that none of these will change for future CPUs in the SH-Mobile / R-Mobile family, so we move those over to the top-level ARCH_SHMOBILE. While we're at it, all of the CPUs support optional GPIOs via the PFC, do not have I/O ports, and expect sparse IRQ, so we bring the configuration in line across the board. This more or less brings the ARM-based parts in sync with their SH counterparts. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-01ARM: mach-shmobile: include drivers/sh/KconfigPaul Mundt
Many of the config bit are presently duplicated between the platforms, which will gradually cleaned up through centralization. For the moment we expose some new INTC features through drivers/sh/Kconfig that the ARM platforms presently don't enable, so make it generally available. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-04ARM: mach-shmobile: ap4evb: Add LCD panel selectionKuninori Morimoto
On AP4EVB board, it is possible to select LCD panel type which are parallel or MIPI by SW3, SW43 dip-switch. This patch add parallel LCD settings and select menu to Kconfig. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-04Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: arch/arm/configs/ap4evb_defconfig arch/arm/configs/g3evm_defconfig arch/arm/configs/g4evm_defconfig Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-07-29ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128Magnus Damm
Introduce SHMOBILE_TIMER_HZ for SH-Mobile. Allow users to select HZ on their system to minimize potential timer drift. Use 128 Hz as default to work well with the 32768 Hz RCLK. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-24ARM: mach-shmobile: add framebuffer support for ap4evbGuennadi Liakhovetski
ap4evb uses an LCD, connected to the SoC over the MIPI bus. This patch adds platform data to configure this display and a static clock activation. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Damian Hobson-Garcia <dhobsong@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22ARM: mach-shmobile: sh7377 clock framework V2Magnus Damm
This patch is V2 of clock framework tables/code for sh7377. MSTP support is included for the following hardware blocks: KEYSC, SCIF, IIC, IRDA, FLCTL, USB, SDHI and UIO. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22ARM: mach-shmobile: sh7367 clock framework V2Magnus Damm
This patch is V2 of clock framework tables/code for sh7367. MSTP support is included for the following hardware blocks: KEYSC, SCIF, IIC, IRDA, FLCTL, VOU, SIU, USB, SDHI and UIO. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-20ARM: mach-shmobile: sh7372 clock framework support V2Magnus Damm
This patch is V2 of clock framework tables/code for sh7372. MSTP are included for KEYSC, SCIF, IIC, USB, SDHI and UIO. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-20ARM: mach-shmobile: Use shared clock frameworkMagnus Damm
Teach SH-Mobile ARM how to make use of the shared SH clock framework. This commit is one atomic switch that dumps the local hackery and instead links in the shared clock framework code in drivers/sh. A few local functions are kept in clock.c. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-20ARM: mach-shmobile: Enable TMU driver buildMagnus Damm
Allow users to build the TMU driver on SH-Mobile ARM. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-18ARM: remove 'select GENERIC_TIME'Russell King
GENERIC_TIME is now enabled by default, so 'select GENERIC_TIME' is redundant. Remove them. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-18ARM: mach-shmobile: Add sh7372 pinmux supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-15ARM: mach-shmobile: sh7377 and G4EVM pinmux supportNISHIMOTO Hiroki
Add support for the sh 7377 pinmux using drivers/sh/pfc.c and some LEDs on G4EVM. Signed-off-by: NISHIMOTO Hiroki <nishimoto.hiroki@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-12ARM: mach-shmobile: sh7367 and G3EVM pinmux supportMagnus Damm
Add support for the sh7367 pinmux using drivers/sh/pfc.c and select serial console pins and some LEDs on G3EVM. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-08ARM: mach-shmobile: SH-Mobile AP4 support.Magnus Damm
This adds preliminary support for the SH7372 (SH-Mobile AP4) CPU and the AP4EVB reference board. Only timer, serial console and NOR flash are supported at this point. Support for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-08ARM: mach-shmobile: SH-Mobile G4 support.Magnus Damm
This adds preliminary support for the SH7377 (SH-Mobile G4) CPU and the G4EVM reference board. Only timer, serial console and NOR flash are supported at this point. Support for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-08ARM: mach-shmobile: SH-Mobile G3 support.Magnus Damm
This adds preliminary support for the SH-Mobile G-series. The SH-Mobile G-series is a series of ARM/SH multi-core CPUs that aside from the ARM MPU are primarily composed of existing SH IP blocks. This includes initial support for the SH7367 (SH-Mobile G3) CPU and the G3EVM reference board. Only timer, serial console, and NOR flash are supported at this point. Patches for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-22 15:29:58 +0000