aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/plat-s5p
AgeCommit message (Collapse)Author
2011-03-15ARM: S5P: Add function to register gpio interrupt bank dataMarek Szyprowski
This patch removes all global data from common s5p gpio interrupt handler code. This enables to reuse this code on EXYNOS4 platform. Instead of global data (IRQ_GPIOINT interrupt number, S5P_GPIOINT_GROUP_MAXNR groups count), a s5p_register_gpioint_bank() function is introduced. It is aimed to be called from gpiolib init. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: S5P: Cleanup S5P gpio interrupt codeMarek Szyprowski
This patch performs a global cleanup in s5p gpio interrupt support code. The code is prepared for upcoming support for gpio interrupts on EXYNOS4 platform, which has 2 gpio banks (regions) instead of one (like on S5PC110 and S5PC100). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-12ARM: S5P: Add platform definitions for FIMC3Sylwester Nawrocki
Add support for fourth FIMC platform device definition and define resources for FIMC modules on EXYNOS4 machines. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-12ARM: S5P: Update defconfig for HRT supportSangbeom Kim
This patch updates s5pv210_defconfig and s5p64x0_defconfig for HRT support and CONFIG_S5P_HRT is used for its configuration. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-12ARM: S5P: HRT supportSangbeom Kim
This patch adds support HR-Timer(High Resolution Timer) and dynamic tick system for S5P SoCs. There are many clock sources for HR-Timer on S5P SoCs. The PWM timer, RTC, System Timer, and MCT can be used for clock source. This patch can only support PWM timer for clock source of S5P64X0 and S5PV210. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-11ARM: S5P: Add support for common MIPI CSIS/DSIM D-PHY controlSylwester Nawrocki
Add common code for MIPI-CSIS and MIPI-DSIM drivers to support their corresponding D-PHY's enable and reset control. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-11ARM: S5P: Extend MIPI-CSIS platform_data with the PHY control callbackSylwester Nawrocki
Extend MIPI-CSIS driver's platform data structure with a callback for D-PHY enable and reset control. Also add a flag indicating whether the external MIPI-CSI (VDD18_MIPI) power supply should be managed in the driver through the "vdd" power supply. On some boards this regulator may be a fixed voltage regulator without an inhibit function. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-11ARM: S5P: Rename MIPI-CSIS driver header and update CopyrightSylwester Nawrocki
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-11ARM: S5P: Add platform helpers for camera GPIO configurationSylwester Nawrocki
Add functions for configuration of the parallel camera bus pins on S5PV210 and Exynos4 SoC. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-22ARM: EXYNOS4: Update Kconfig and Makefile for the new ARCH_EXYNOS4Kukjin Kim
This patch changes the Kconfig and Makefile for the new ARCH_EXYNOS4. It also updates arch/arm/Kconfig, Makeifile and arch/arm/mm/Kconfig to include support for the new ARCH_EXYNOS4. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-22ARM: EXYNOS4: Add EXYNOS4 CPU initialization supportKukjin Kim
This patch adds EXYNOS4 CPU support files in mach-exynos4, and basically they are moved from mach-s5pv310 so that it can support Samsung's new CPU name, EXYNOS4. The EXYNOS4 ingegrates a ARM Cortex A9 multi-core. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-17ARM: S5P: Fix end address in memory resource information for UART devicesThomas Abraham
For S5P platforms, the end address in memory resource information for UART devices is one byte more than the intended value. Fix this by reducing the end address by one byte. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-11ARM: S5PV310: Cleanup System MMUKukjin Kim
This patch cleans following up. - Moved definition of System MMU IPNUM into mach/sysmmu.h - Removed useless SYSMMU_DEBUG configuration - Removed useless header file plat/sysmmu.h Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-13ARM: S5P: Add Support System MMUDonguk Ryu
This patch adds support System MMU which supports address transition from virtual address to physical address. Basically, each hardware block is connected System MMU block can use directly vitrual address when it accesses physical memory not using physical address. Signed-off-by: Donguk Ryu <du.ryu@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> [kgene.kim@samsung.com: removed useless codes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-03Merge branch 'next-samsung-irq_data' into for-nextKukjin Kim
2011-01-03ARM: S5P: irq_data conversionLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-31Merge branch 'next-s5pv310' into for-nextKukjin Kim
Conflicts: arch/arm/mach-s5pv310/Kconfig arch/arm/mach-s5pv310/Makefile arch/arm/mach-s5pv310/mach-smdkc210.c arch/arm/mach-s5pv310/mach-smdkv310.c arch/arm/plat-samsung/include/plat/devs.h
2010-12-30Merge branch 'next-s5p' into for-next-newKukjin Kim
2010-12-30ARM: S5P: Add platform support for MIPI CSIS devicesSylwester Nawrocki
There may be up to two MIPI CSI slave interfaces depending on the SoC version. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5P: Move SROM controller IO mapping to plat-s5p for S5P SoCsThomas Abraham
This patch modifies the following. 1. Moves the SROM controller mapping from S5PV210 specific code to S5P common code. The SROM controller mapping can be used for all S5P SoCs. 2. Define the SROM controller physical address for S5P64X0, S5P6442, S5PC100, S5PV210 and S5PV310. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5P: Add SROM bank 4 and 5 register offsetsThomas Abraham
Some of the S5P platforms like S5PC100 and S5PV210 include SROM banks 4 and 5 in addition to SROM banks 0 to 3. This patch adds register offsets for SROM bank 4 and 5. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5P: Add SROM control register shift macros for other banks.Thomas Abraham
This patch adds shift macros for the SROM Bus width and control register to represent the shift count for the 5th and 6th SROM banks. Some of the S5P SOCs have them. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5P: Move the SROM register definitions to plat-s5pKukjin Kim
The SROM register difinitions of S5PV310/S5PC210 (mach/regs-srom.h) can be used to other S5P SoCs such as S5PV210/S5PC110. So moved into plat/regs-srom.h of plat-s5p directory. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5PV310: Add support Power DomainChanghwan Youn
This patch adds support Power Domain for S5PV310 and S5PC210. Signed-off-by: Changhwan Youn <chaos.youn at samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: SAMSUNG: Convert s3c_irqext_wake() to new irq_ interrupt methodsMark Brown
Kernel 2.6.37 adds new interrupt methods which take a struct irq_data rather than an irq number. Begin converting Samsung platforms over to these methods by converting s3c_irqext_wake() with a simple textual substitution. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5P: Add initial map for GPIO2 and GPIO3Jongpill Lee
This patch adds initial map for GPIO2 and GPIO3. S5PV310/S5PC210 has separated GPIO1, GPIO2 and GPIO3. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5P: Reduce duplicated EPLL control codesSeungwhan Youn
S5P Samsung SoCs has a EPLL to support various PLL clock sources for other H/W blocks. Until now, to control EPLL, each of SoCs make their own functions in 'mach-s5pxxx/clock.c'. But some of functions, 'xxx_epll_get_rate()' and 'xxx_epll_enable()', are exactly same in all S5P SoCs, so this patch move these duplicated codes to common EPLL functions that use platform wide. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5P: Cleanup the S5P SoCs' VA address mappingKukjin Kim
Basically S5P SoCs use the Samsung common VA address mapping where plat-samsung and use plat-s5p's mapping also. The later is a little mess. So this patch cleans it up. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5P: Fix missed IRQ_EINT_BIT()Kukjin Kim
When merged patches, missed IRQ_EINT_BIT() definition from commit ea31fd43 (ARM: S5PV210: Add Power Management Support). The IRQ_EINT_BIT() is used in the Power Management operation (plat-samsung/pm.c). Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: Add Power Management SupportJongpill Lee
This patch adds suspend-to-ram support for S5PV210. Note. This patch is confirmed on SMDKV210 and SMDKC110 board. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5P: Unify defines for both gpio interrupt typesMarek Szyprowski
Samsung S5P SoCs have the same interrupt type defines for both external interrupts and gpio interrupts. This patch removes all duplicates from S5PC100 and S5PV210 specific includes as well as gpio interrupt code and put a common defines to plat/irqs.h NOTE: Do not use this for S5P6440 and S5P6450. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: add note for S5P64X0] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: SAMSUNG: Add common samsung_gpiolib_to_irq functionJoonyoung Shim
This patch adds a common callback for gpio_to_irq() for external and gpio interrupts for Samsung SoCs. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: moved samsung_gpiolib_to_irq() for s3c24xx build] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5P: Add common S5P GPIO Interrupt supportMarek Szyprowski
This patch adds common code to enable support of GPIO interrupt on S5P SoCs. The total number of GPIO pins is quite large on S5P SoCs. Registering irq support for all of them would be a resource waste. Because of that the interrupt support for standard GPIO pins is registered dynamically by the s5p_register_gpio_interrupt() function. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor title fixes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: Enable USB HSOTG gadget buildMarek Szyprowski
Add the necessary definitions and mapping information to enable the s3c-hsotg gadget to build. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5P: Remove the unused clk_arm clock from plat-s5pThomas Abraham
All the S5P series SoCs use the 'struct clksrc_clk' type to represent the armclk. So the clk_arm clock instance available in the plat-s5p clock code is not used in any of the S5P series SoCs. This patch removes the unused clk_arm instance from plat-s5p clock code. Reported-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: Add DMC map_desc table for supporting DMC accessJaecheol Lee
This patch adds DMC(DRAM Memory Controller) map_desc table. Because some driver such as CPUFREQ need to access DMC register. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18ARM: S5P64X0: Add UART serial support for S5P6450Kukjin Kim
This patch adds UART serial port support for S5P6450 SoC. The S5P6450 has 6 UARTs, so adds resource of UART4 and UART5. And to fix membase which is in serial/samsung.c is from Ben Dooks. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org>
2010-10-18ARM: S5P64X0: Update Clock for S5P6440 and S5P6450Kukjin Kim
This patch updates regarding clock files for supporting S5P6440 and S5P6450 with one kernel image. The mach-s5p64x0/clock.c is for common of them and there are specific clock files for each SoCs. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18ARM: S5P64X0: Add S5P64X0(S5P6440 and S5P6450) initialization supportKukjin Kim
This patch adds ARCH_S5P64X0 which can support S5P6440 and S5P6450 with one kernel image. So moved some files of mach-s5p6440 into the new ARCH directory mach-s5p64x0. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18ARM: S5P64X0: Update Kconfig and MakefileKukjin Kim
This patch updates the Kconfig and Makefile for the S5P6440 and S5P6450 machines. It also updates arch/arm/ Kconfig and Makefile to include for support ARCH_S5P64X0 with one kernel image. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18ARM: S5P: Moves initial map for merging S5P64X0Kukjin Kim
This patch moves some initial maps from plat-s5p to machine, so that can merge mach-s5p6440 and mach-s5p6450. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18ARM: S5P: Move OneNAND device definitions in plat-s5pKukjin Kim
This patch moves OneNAND device definitions from mach-s5pv210 to plat-s5p so that can support it commonly. Note: S5PC110 and S5PC210 have same OneNAND driver. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com>
2010-09-14ARM: S5P: Decrease IO Registers memory region size on FIMCSylwester Nawrocki
IO registers region size of all FIMC versions is less than 1kB so there is no need to reserve 1M. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> [kgene.kim@samsung.com: minor title fix] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-09-14ARM: S5P: Fix DMA coherent mask for FIMCMarek Szyprowski
FIMC driver uses DMA_coherent allocator, which requires proper dma mask to be set. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor title fix] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Fix on Secondary CPU startupChanghwan Youn
Following occurs on boot message without this patch. CPU1: processor failed to boot Brought up 1 CPUs SMP: Total of 1 processors activated... This patch adds SYSRAM mapping for fixing Secondary CPU startup. CPU1: Booted secondary processor Brought up 2 CPUs SMP: Total of 2 processors activated... Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Add CMU block for S5PV310 ClockKukjin Kim
This patch adds CMU block for S5PV310/S5PC210 clock. (CMU: Clock Management Unit) Of course, changed current clock addresses for it together. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-09ARM: S5P: Fix on missing S5P_DEV_FIMC in plat-s5p/KconfigKukjin Kim
This patch fixes on missing S5P_DEV_FIMC in plat-s5p/Kconfig. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-06Merge branch 'next-samsung' into for-nextKukjin Kim
Conflicts: arch/arm/mach-s5p6440/Kconfig arch/arm/mach-s5p6442/Kconfig arch/arm/mach-s5pc100/Kconfig arch/arm/mach-s5pv210/Kconfig arch/arm/mach-s5pv210/cpu.c arch/arm/plat-samsung/include/plat/sdhci.h
2010-08-06Merge branch 'next-s5p' into for-nextKukjin Kim
Conflicts: arch/arm/mach-s5pv210/mach-aquila.c arch/arm/mach-s5pv210/mach-goni.c
2010-08-06ARM: SAMSUNG: Add platform definitions and helpers for FIMC driverSylwester Nawrocki
FIMC (CAMIF) device is a camera interface embedded in S3C/S5P Samsung SOC series. It supports ITU-R BT.601/656 and MIPI-CSI2 standards, memory to memory operations, color conversion, resizing and rotation. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-14 07:22:32 +0000