aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2011-11-23Merge branches 'drivers/macb-gem' and 'drivers/pxa-gpio' into next/driversArnd Bergmann
2011-11-22macb: unify at91 and avr32 platform dataJamie Iles
Both at91 and avr32 defines its own platform data structure for the macb driver and both share common structures though at91 includes a currently unused phy_irq_pin. Create a common macb_platform_data for macb that both at91 and avr32 can use. In future we can use this to support other architectures that use the same IP block with the macb driver. v2: rename eth_platform_data to macb_platform_data and allow at91_ether to share the platform data with macb. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-22at91: provide macb clks with "pclk" and "hclk" nameJamie Iles
The macb driver expects clocks with the names "pclk" and "hclk". We currently provide "macb_clk" but to fit in line with other architectures (namely AVR32), provide "pclk" and a fake "hclk". Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-15ARM: pxa: add clk support in gpio driverHaojian Zhuang
Support clk in gpio driver. There's no gpio clock in PXA25x and PXA27x. So use dummy clk instead. And move the gpio edge initialization into gpio driver for arch-mmp. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-15ARM: pxa: change gpio to platform deviceHaojian Zhuang
Remove most gpio macros and change gpio driver to platform driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-14ARM: pxa: use generic gpio operation instead of gpio registerHaojian Zhuang
Remove the code of accessing gpio register. Use the generic read operation instead. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-14ARM: pxa: rename NR_BUILTIN_GPIOHaojian Zhuang
NR_BUILTIN_GPIO is both defined in arch-pxa and arch-mmp. Now replace it with PXA_NR_BUILTIN_GPIO and MMP_NR_BUILTIN_GPIO. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-14ARM: pxa: rename gpio_to_irq and irq_to_gpioHaojian Zhuang
Avoid to define gpio_to_irq() and irq_to_gpio() for potential name confliction since multiple architecture will be built together. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-14ARM: pxa: use chained interrupt for GPIO0 and GPIO1Haojian Zhuang
GPIO0 and GPIO1 are linked to unique interrupt line in PXA series, others are linked to another interrupt line. All GPIO are linked to one interrupt line in MMP series. Since gpio driver is shared between PXA series and MMP series, define GPIO0 and GPIO1 as chained interrupt chip. So we can move out gpio code from irq.c to gpio-pxa.c. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-11-14ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQHaojian Zhuang
Avoid potential naming confliction since multiple architecture will be built in a single kernel. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-11-14Merge branch 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
* 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-sh: ARM: mach-shmobile: cpuidle single/global and last_state fixes ARM: mach-shmobile: move helper macro PORTCR to sh_pfc.h ARM: mach-shmobile: move helper macro PORT_xx to sh_pfc.h ARM: mach-shmobile: move helper macro PORT_DATA_xx to sh_pfc.h ARM: mach-shmobile: ap4evb: remove white space from end of line ARM: mach-shmobile: clock-sh7372: remove un-necessary index ARM: mach-shmobile: kota2: add comment out separator ARM: mach-shmobile: sh73a0: add MMC data pin pull-up
2011-11-14Merge branch 'sh-fixes-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
* 'sh-fixes-for-linus' of git://github.com/pmundt/linux-sh: mailmap: Fix up some renesas attributions sh: clkfwk: Kill off remaining debugfs cruft. drivers: sh: Kill off dead pathname for runtime PM stub. drivers: sh: Generalize runtime PM platform stub. sh: Wire up process_vm syscalls. sh: clkfwk: add clk_rate_mult_range_round() serial: sh-sci: Fix up SH-2A SCIF support. sh: Fix cached/uncaced address calculation in 29bit mode
2011-11-11Merge branch 'picoxcell-fixes' of git://github.com/jamieiles/linux-2.6-ji ↵Olof Johansson
into fixes
2011-11-11Merge branch 'imx-fixes-for-arnd' of ↵Olof Johansson
git://git.pengutronix.de/git/imx/linux-2.6 into fixes
2011-11-11arm/imx: fix imx6q mmc error when mounting rootfsShawn Guo
The following error is seen in some case when mounting rootfs from SD/MMC cards. Waiting for root device /dev/mmcblk0p1... mmc1: host does not support reading read-only switch. assuming write-enable. mmc1: new high speed SDHC card at address b368 mmcblk0: mmc1:b368 SDC 3.74 GiB mmcblk0: p1 mmc1: Timeout waiting for hardware interrupt. mmcblk0: error -110 transferring data, sector 3678224, nr 40, cmd response 0x900, card status 0xc00 end_request: I/O error, dev mmcblk0, sector 3678225 Buffer I/O error on device mmcblk0p1, logical block 458754 lost page write due to I/O error on mmcblk0p1 This patch fixes the problem by lowering the usdhc clock and correcting watermark configuration. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Chris Ball <cjb@laptop.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-11arm/imx: fix AUTO_ZRELADDR selectionShawn Guo
The AUTO_ZRELADDR selection for ARCH_IMX_V4_V5 and ARCH_MX5 should really be mutually exclusive to ZBOOT_ROM just like what ARCH_IMX_V6_V7 does. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-11arm/imx: fix the references to ARCH_MX3Shawn Guo
The config symbol ARCH_MX3 has been removed by commit 'a89cf59 arm/imx: merge i.MX3 and i.MX6', and it should not be referenced any more. The patch also change ARCH_MX* to SOC_IMX* for other platforms. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-11ARM: mx51/53: set pwm clock parent to ipg_perclkRichard Zhao
Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-11ARM: mach-shmobile: cpuidle single/global and last_state fixesMagnus Damm
The following commits break cpuidle on SH-Mobile ARM: 46bcfad cpuidle: Single/Global registration of idle states e978aa7 cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state This patch remedies these issues by up-porting the SH-Mobile code to fit with the above introduced framework changes. It is worth noting that the new code becomes significantly cleaner, so these framework changes are very welcome. At the same time this breakage could probably have been avoided by grepping for "last_state" and "cpuidle_register_driver". Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: move helper macro PORTCR to sh_pfc.hKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: move helper macro PORT_xx to sh_pfc.hKuninori Morimoto
This patch moves PORT_xx helper macro to sh_pfc.h, and it expects CPU_ALL_PORT() macro for each CPU Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: move helper macro PORT_DATA_xx to sh_pfc.hKuninori Morimoto
This patch move PORT_DATA_xx helper macro to sh_pfc.h. and pfc-sh7372.c used it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: ap4evb: remove white space from end of lineKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: clock-sh7372: remove un-necessary indexKuninori Morimoto
it is not necessary to have sh7372_xxxx index on static variable Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: kota2: add comment out separatorKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: sh73a0: add MMC data pin pull-upKuninori Morimoto
This patch adds MMC data pin pull-up option for pfc-sh73a0.c, and select it on ag5evm board. The MMC read/write will be error without this patch. Cc: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11drivers: sh: Generalize runtime PM platform stub.Paul Mundt
The runtime PM platform support stub in use by ARM-based SH/R-Mobile platforms contains nothing that's specifically ARM-related and instead of wholly generic to anything using the clock framework. The recent runtime PM changes interact rather badly with the lazy disabling of clocks late in the boot process through the clock framework, leading to situations where the runtime suspend/resume paths are entered without a clock being actively driven due to having been lazily gated off. In order to correct this we can trivially tie in the aforementioned stub as a general fallback for all SH platforms that don't presently have their own runtime PM implementations (the corner case being SH-based SH-Mobile platforms, which have their own stub through the hwblk API -- which in turn has bitrotted and will be subsequently adapted to use the same stub as everyone else), regardless of whether the platforms choose to define power domains of their own or not. This fixes up regressions for clock framework users who also build in runtime PM support without any specific power domains of their own, which was previously causing the serial console to be lost when warring with lazy clock disabling. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-09Merge branch 'msm-fix' of git://codeaurora.org/quic/kernel/davidb/linux-msm ↵Olof Johansson
into fixes
2011-11-09Merge branch 'for-3.2/fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra into fixes
2011-11-09arm/tegra: enable headphone detection gpio on seaboardYufeng Shen
Enable the headphone detection gpio on tegra platform. Signed-off-by: Yufeng Shen <miletus@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-09arm/dt: Fix ventana SDHCI power-gpiosStephen Warren
Ventana uses the same SDHCI GPIOs as Seaboard; PI6 (70) is the power GPIO for the SD port, and there is no power GPIO for the MMC chip. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-09arm/tegra: Don't create duplicate gpio and pinmux devicesStephen Warren
*_pinmux_init() register the GPIO and pinmux devices so that they're ready before any other device needs them. *_pinmux_init() are also called by board-dt.c in order to set up the GPIO and pinmux configurations. In this case, if we register the devices, they end up being probed once due to this registration, and a second time due to a device-tree node (or vice-versa). The second probe fails since the memory regions are already requested. Besides, we don't actually want the duplicated devices. To avoid this duplicate registration, modify *_pinmux_init() to check whether it's running on a DT machine. If not, register the pinmux devices. If so, don't register them. Finally, modify board-dt.c to call the *_pinmux_init() after all devices have been instantiated from device-tree. This allows the GPIO and pinmux devices to be instantiated and initialized before calling functions to configure the hardware. This has one disadvantage: The pinmux and GPIO initialization now happens after /all/ devices are instantiated, rather than after just gpio and pinmux but before anything else. So the correct HW configuration is not in place when e.g. the SD/MMC device is probed. Long-term, this should be solved by doing both: a) Initializing the HW state from DT nodes during GPIO and pinmux device probe. b) Using the deferred driver probe mechanism, so that drivers can defer their probe until after the gpio and pinmux drivers have probed. v2: s/int is_dt/bool is_dt/ v3: Use of_machine_is_compatible inside *_pinmux_init() rather than passing an explicit parameter into the function from outside. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-09Merge branch 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson
2011-11-09Merge branch 'imx/compile-fixes' of ↵Olof Johansson
git://git.linaro.org/people/shawnguo/linux-2.6 into fixes
2011-11-09ARM: at91: Fix USBA gadget registrationJochen Friedrich
Since 193ab2a6070039e7ee2b9b9bebea754a7c52fd1b, various AT91 boards don't register USBA adapters anymore due to depending on a now non-existing symbol. Fix the symbol name. Signed-off-by: Jochen Friedrich <jochen@scram.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> CC: stable@kernel.org Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-09at91/yl-9200: Fix section mismatchJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-09at91: vmalloc fix missing AT91_VIRT_BASE defineJean-Christophe PLAGNIOL-VILLARD
VMALLOC_END is defined in terms of AT91_VIRT_BASE but this needs mach/hardware.h for it's definition. In file included from arch/arm/mach-at91/board-usb-a926x.c:26:0: include/linux/mm.h: In function 'is_vmalloc_addr': include/linux/mm.h:305:41: error: 'AT91_VIRT_BASE' undeclared (first use in this function) include/linux/mm.h:305:41: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com>
2011-11-09ARM: at91: usart: drop static map regs for dbguJean-Christophe PLAGNIOL-VILLARD
In commit fb149f9e28354 we introduce ioremap support for static map_io, we do not need this register entry anymore. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-09ARM: picoxcell: add extra temp register to addruartJamie Iles
639da5ee3 (ARM: add an extra temp register to the low level debugging addruart macro) didn't include picoxcell as it hadn't been merged at the time. Fix up the compile breakage by adding the extra temp parameter. Signed-off-by: Jamie Iles <jamie@jamieiles.com>
2011-11-08ARM: msm: fix compilation flags for MSM_SCMMarc Zyngier
CONFIG_MSM_SCM uses the smc instruction, which with some toolchains requires a ".arch_extension" directive. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-08arm/mxs: fix mmc device adding for mach-mx28evkShawn Guo
The merge commit "526b264 Merge branch 'imx/cleanup' into imx/devel" left a duplicated mx28_add_mxs_mmc() call, which causes the problem below during boot. kobject_add_internal failed for mxs-mmc.1 with -EEXIST, don't try to register things with the same name in the same directory. The patch removes this leftover and also change mmc0 adding to align with mmc1. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-11-07Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (31 commits) ARM: OMAP: Fix export.h or module.h includes ARM: OMAP: omap_device: Include linux/export.h ARM: OMAP2: Fix H4 matrix keyboard warning ARM: OMAP1: Remove unused omap-alsa.h ARM: OMAP1: Fix warnings about enabling 32 KiHz timer ARM: OMAP2+: timer: Remove omap_device_pm_latency ARM: OMAP2+: clock data: Remove redundant timer clkdev ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpio ARM: OMAP: usb: musb: OMAP: Delete unused function MAINTAINERS: Update linux-omap git repository ARM: OMAP: change get_context_loss_count ret value to int ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properly ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFF ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on success ARM: OMAP: dmtimer: Include linux/module.h ARM: OMAP2+: l3-noc: Include linux/module.h ARM: OMAP2+: devices: Fixes for McPDM ARM: OMAP: Fix errors and warnings when building for one board ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only ...
2011-11-07Merge branch 'fixes-modulesplit' into fixesTony Lindgren
2011-11-07ARM: OMAP: Fix export.h or module.h includesTony Lindgren
Commit 32aaeffbd4a7457bf2f7448b33b5946ff2a960eb (Merge branch 'modsplit-Oct31_2011'...) caused some build errors. Fix these and make sure we always have export.h or module.h included for MODULE_ and EXPORT_SYMBOL users: $ grep -rl ^MODULE_ arch/arm/*omap*/*.c | xargs \ grep -L linux/module.h arch/arm/mach-omap2/dsp.c arch/arm/mach-omap2/mailbox.c arch/arm/mach-omap2/omap-iommu.c arch/arm/mach-omap2/smartreflex.c Also check we either have export.h or module.h included for the files exporting symbols: $ grep -rl EXPORT_SYMBOL arch/arm/*omap*/*.c | xargs \ grep -L linux/export.h | xargs grep -L linux/module.h Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-07ARM: OMAP: omap_device: Include linux/export.hAxel Lin
Include linux/export.h to fix below build warning: CC arch/arm/plat-omap/omap_device.o arch/arm/plat-omap/omap_device.c:1055: warning: data definition has no type or storage class arch/arm/plat-omap/omap_device.c:1055: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' arch/arm/plat-omap/omap_device.c:1055: warning: parameter names (without types) in function declaration Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-07arm: Add export.h to recently added files for EXPORT_SYMBOLPaul Gortmaker
These files didn't exist at the time of the module.h split, and so were not fixed by the commits on that baseline. Since they use the EXPORT_SYMBOL and/or THIS_MODULE macros, they will need the new export.h file included that provides them. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-07Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: cpuidle: Single/Global registration of idle states cpuidle: Split cpuidle_state structure and move per-cpu statistics fields cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare() cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state ACPI: Fix CONFIG_ACPI_DOCK=n compiler warning ACPI: Export FADT pm_profile integer value to userspace thermal: Prevent polling from happening during system suspend ACPI: Drop ACPI_NO_HARDWARE_INIT ACPI atomicio: Convert width in bits to bytes in __acpi_ioremap_fast() PNPACPI: Simplify disabled resource registration ACPI: Fix possible recursive locking in hwregs.c ACPI: use kstrdup() mrst pmu: update comment tools/power turbostat: less verbose debugging
2011-11-07Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (226 commits) mtd: tests: annotate as DANGEROUS in Kconfig mtd: tests: don't use mtd0 as a default mtd: clean up usage of MTD_DOCPROBE_ADDRESS jffs2: add compr=lzo and compr=zlib options jffs2: implement mount option parsing and compression overriding mtd: nand: initialize ops.mode mtd: provide an alias for the redboot module name mtd: m25p80: don't probe device which has status of 'disabled' mtd: nand_h1900 never worked mtd: Add DiskOnChip G3 support mtd: m25p80: add EON flash EN25Q32B into spi flash id table mtd: mark block device queue as non-rotational mtd: r852: make r852_pm_ops static mtd: m25p80: add support for at25df321a spi data flash mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks mtd: nand: switch `check_pattern()' to standard `memcmp()' mtd: nand: invalidate cache on unaligned reads mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set mtd: nand: wait to set BBT version mtd: nand: scrub BBT on ECC errors ... Fix up trivial conflicts: - arch/arm/mach-at91/board-usb-a9260.c Merged into board-usb-a926x.c - drivers/mtd/maps/lantiq-flash.c add_mtd_partitions -> mtd_device_register vs changed to use mtd_device_parse_register.
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-06Merge branch 'trivial' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild * 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: scsi: drop unused Kconfig symbol pci: drop unused Kconfig symbol stmmac: drop unused Kconfig symbol x86: drop unused Kconfig symbol powerpc: drop unused Kconfig symbols powerpc: 40x: drop unused Kconfig symbol mips: drop unused Kconfig symbols openrisc: drop unused Kconfig symbols arm: at91: drop unused Kconfig symbol samples: drop unused Kconfig symbol m32r: drop unused Kconfig symbol score: drop unused Kconfig symbols sh: drop unused Kconfig symbol um: drop unused Kconfig symbol sparc: drop unused Kconfig symbol alpha: drop unused Kconfig symbol Fix up trivial conflict in drivers/net/ethernet/stmicro/stmmac/Kconfig as per Michal: the STMMAC_DUAL_MAC config variable is still unused and should be deleted.
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-03 02:18:09 +0000