aboutsummaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf518/boards
AgeCommit message (Collapse)Author
2012-05-21blackfin: twi: Move TWI peripheral pin request array to platform dataSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-02-19arch/blackfin: don't generate random mac in bfin_get_ether_addr()Danny Kukawka
Changed bfin_get_ether_addr() to return a state and to set no random mac address if the board don't provide one. Let the caller of bfin_get_ether_addr() set a random mac address if the return value is not 0. v2: don't set random mac in bfin_get_ether_addr() Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-09blackfin: mac: dsa: add vlan mask in board fileSteven Miao
Else push file through ftp/rcp will fail. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-01-09blackfin: config: update macro SPI_BFIN in board fileSonic Zhang
Macro name for spi controller driver has been modified, so update default board file accordingly. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2011-11-14Blackfin: add serial TX IRQ in individual platform resourceSonic Zhang
The serial TX IRQ is not simply (RX IRQ + 1) on some Blackfin chips, so move the values to the platform resources. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2011-10-31blackfin: Add export.h to files using EXPORT_SYMBOL/THIS_MODULEPaul Gortmaker
These particular files were just assuming that module.h was somehow in the include paths. Give them the more minimalist header file explicitly. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-23Blackfin: boards: clean up redundant/dead spi resourcesMike Frysinger
The default for the Blackfin SPI driver is 8 bits and dma disabled, so many of the bfin5xx_spi_chip resources are redundant. So punt those parts. Further, drivers should themselves be declaring 16 bit transfers, so for those that do, and for the ones which no longer do 16 bit transfers, drop the bfin5xx_spi_chip resources. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: boards: add missing "static" to peripheral listsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: bf518f-ezbrd: fix dsa resourcesSonic Zhang
On bf518-ezbrd with DSA Ethernet switch enabled, on chip MAC is connecting to phy at address 3. If allowing the netdevice framework to probe both 3 phys of the switch when registering MAC phy, phy at address 1 is checked for link active status other than phy at address 3. If connecting a cable to port 2 and leave port 1 open, link status in phy 2 and 3 are online, while that in phy 1 is offline. So, the phy layer sets wrong offline status to net device on port 3. In this case, no data can be transferred via ethernet port 2. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: sport_uart resources: remove unused secondary RX/TX pinsSonic Zhang
The SPORT/UART driver doesn't use the secondary channel pins, so don't try and request them thus keeping other drivers from using them. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25netdev: bfin_mac: push settings to platform resourcesSonic Zhang
Move all the pin settings out of the Kconfig and into the platform resources (MII vs RMII). This clean up also lets us push out the phy settings so that board porters may control the layout. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf518-ezkit: add ssm2603 codec resourcesBob Liu
This board has a SSM2603 codec, so make sure we have the right resources declared for it. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: boards: fix num_chipselect values for on-chip SPI busesMike Frysinger
The num_chipselect field for on-chip Blackfin SPI buses is supposed to be 1 larger than the number of actual CSs available. This is because the hardware starts counting at 1 and not 0. There is a field for "CS0", but it is marked as "reserved" everywhere. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: tcm-bf518: new board portHarald Krapfenbauer
Signed-off-by: Harald Krapfenbauer <harald.krapfenbauer@bluetechnix.at> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: add UART/SPORT early platform resourcesSonic Zhang
This lets people easily select the UART/SPORT consoles for early printk while leveraging the pins declared in the boards file. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: move SPORT UART resources to boards filesSonic Zhang
Rather than keeping the pins in the actual driver and worrying about a mess of Kconfig options, declare all the desired pin resources in the boards file. This lets people easily select the specific pins/ports for the normal emulated UART as well as GPIOs for CTS/RTS. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: move on-chip UART resources to boards filesSonic Zhang
Rather than keeping the pins in the actual driver and worrying about a mess of Kconfig options, declare all the desired pin resources in the boards file. This lets people easily select the specific pins/ports for the normal UART as well as GPIOs for CTS/RTS. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08Blackfin: drop all simple-gpio board resourcesMike Frysinger
The simple-gpio has been replaced by the gpio sysfs interface, so drop the unused simple-gpio resources from all Blackfin boards. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07Blackfin: mass clean up of copyright/licensing infoRobin Getz
Bill Gatliff & David Brownell pointed out we were missing some copyrights, and licensing terms in some of the files in ./arch/blackfin, so this fixes things, and cleans them up. It also removes: - verbose GPL text(refer to the top level ./COPYING file) - file names (you are looking at the file) - bug url (it's in the ./MAINTAINERS file) - "or later" on GPL-2, when we did not have that right It also allows some Blackfin-specific assembly files to be under a BSD like license (for people to use them outside of Linux). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: drop board resources for dead devices (pbx/ad9960)Mike Frysinger
These hardware devices are dead and the drivers never cleaned up/merged, so punt the useless board resource info. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: rename PCF8574 driver configMichael Hennerich
The "TWI_KEYPAD" driver was renamed to "INPUT_PCF8574", so update the defines in the board resources accordingly. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16Blackfin: fix incomplete renaming of the bfin-twi-lcd driverMichael Hennerich
The sed used to rename the bfin-twi-lcd only replaced the first instance rather than all which led to the resources not being enabled when the driver was built as a module. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: bf518f-ezbrd: update DSA resourcesMike Frysinger
The common DSA code changed structure layout, so update the BF518F-EZBRD resources accordingly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: bf518f-ezbrd: fix SPI CS for SPI flashGraf Yang
The SPI flash on the BF518F-EZBRD board is actually hooked up to CS2, not CS1, so make sure the resources are correct. URL: http://blackfin.uclinux.org/gf/tracker/5220 Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: define SPI IRQ in board resourcesYi Li
The Blackfin SPI driver can be driven by an IRQ now, so declare it in the board resources. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: rename some Blackfin driversMike Frysinger
Try to keep the naming conventions consistent, so: SPI_ADC_BF533 -> BFIN_SPI_ADC TWI_LCD -> BFIN_TWI_LCD Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: BF518F-EZBRD: handle required portmuxing of async pinsGraf Yang
The two high address lines on the BF51x are not dedicated which means we need to handle them like any other peripheral pin if we want to access the upper 2MB of parallel flash. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-03-06Blackfin arch: SPI_MMC is now mainlined MMC_SPIMichael Hennerich
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-05Blackfin arch: Fix bug - make ksz8893m driver available when bfin_mac is enabledGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: add platform device bfin_mii-bus and KSZ8893M switch driver ↵Graf Yang
platform resources to board files Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: drop CONFIG_I2C_BOARDINFO ifdefsMike Frysinger
Drop CONFIG_I2C_BOARDINFO ifdefs as the common i2c header handles this already by stubbing things out Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Fix bug - Run "reboot" hangs bf518-ezbrdSonic Zhang
[Mike Frysinger <vapier.adi@gmail.com>: - setup P_DEFAULT_BOOT_SPI_CS for every arch based on the default bootrom behavior and convert all our boards to it - revert previous anomaly change ... bf51x is not affected by anomaly 05000353] Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: add SDIO host driver platform dataCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Modify bfin_sir device configuration to board fileGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: make ADI board names consistentMike Frysinger
Cc: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: add support for Blackfin latest processor family BF51xBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-14 17:06:52 +0000