aboutsummaryrefslogtreecommitdiff
path: root/arch/m68k
AgeCommit message (Collapse)Author
2013-08-20m68k/atari: ARAnyM - Fix NatFeat module supportGeert Uytterhoeven
commit e8184e10f89736a23ea6eea8e24cd524c5c513d2 upstream. As pointed out by Andreas Schwab, pointers passed to ARAnyM NatFeat calls should be physical addresses, not virtual addresses. Fortunately on Atari, physical and virtual kernel addresses are the same, as long as normal kernel memory is concerned, so this usually worked fine without conversion. But for modules, pointers to literal strings are located in vmalloc()ed memory. Depending on the version of ARAnyM, this causes the nf_get_id() call to just fail, or worse, crash ARAnyM itself with e.g. Gotcha! Illegal memory access. Atari PC = $968c This is a big issue for distro kernels, who want to have all drivers as loadable modules in an initrd. Add a wrapper for nf_get_id() that copies the literal to the stack to work around this issue. Reported-by: Thorsten Glaser <tg@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20m68k: Truncate base in do_div()Andreas Schwab
commit ea077b1b96e073eac5c3c5590529e964767fc5f7 upstream. Explicitly truncate the second operand of do_div() to 32 bits to guard against bogus code calling it with a 64-bit divisor. [Thorsten] After upgrading from 3.2 to 3.10, mounting a btrfs volume fails with: btrfs: setting nodatacow, compression disabled btrfs: enabling auto recovery btrfs: disk space caching is enabled *** ZERO DIVIDE *** FORMAT=2 Current process id is 722 BAD KERNEL TRAP: 00000000 Modules linked in: evdev mac_hid ext4 crc16 jbd2 mbcache btrfs xor lzo_compress zlib_deflate raid6_pq crc32c libcrc32c PC: [<319535b2>] __btrfs_map_block+0x11c/0x119a [btrfs] SR: 2000 SP: 30c1fab4 a2: 30f0faf0 d0: 00000000 d1: 00001000 d2: 00000000 d3: 00000000 d4: 00010000 d5: 00000000 a0: 3085c72c a1: 3085c72c Process mount (pid: 722, task=30f0faf0) Frame format=2 instr addr=319535ae Stack from 30c1faec: 00000000 00000020 00000000 00001000 00000000 01401000 30253928 300ffc00 00a843ac 3026f640 00000000 00010000 0009e250 00d106c0 00011220 00000000 00001000 301c6830 0009e32a 000000ff 00000009 3085c72c 00000000 00000000 30c1fd14 00000000 00000020 00000000 30c1fd14 0009e26c 00000020 00000003 00000000 0009dd8a 300b0b6c 30253928 00a843ac 00001000 00000000 00000000 0000a008 3194e76a 30253928 00a843ac 00001000 00000000 00000000 00000002 Call Trace: [<00001000>] kernel_pg_dir+0x0/0x1000 [...] Code: 222e ff74 2a2e ff5c 2c2e ff60 4c45 1402 <2d40> ff64 2d41 ff68 2205 4c2e 1800 ff68 4c04 0800 2041 d1c0 2206 4c2e 1400 ff68 [Geert] As diagnosed by Andreas, fs/btrfs/volumes.c:__btrfs_map_block() calls do_div(stripe_nr, stripe_len); with stripe_len u64, while do_div() assumes the divisor is a 32-bit number. Due to the lack of truncation in the m68k-specific implementation of do_div(), the division is performed using the upper 32-bit word of stripe_len, which is zero. This was introduced by commit 53b381b3abeb86f12787a6c40fee9b2f71edc23b ("Btrfs: RAID5 and RAID6"), which changed the divisor from map->stripe_len (struct map_lookup.stripe_len is int) to a 64-bit temporary. Reported-by: Thorsten Glaser <tg@debian.org> Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Tested-by: Thorsten Glaser <tg@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu fix from Greg Ungerer: "A single fix for compilation breakage to many of the ColdFire CPU targets" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: only use local gpio_request_one if not using GPIOLIB
2013-06-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fix from Geert Uytterhoeven: "A boot lock-up on Mac, also destined for stable" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/mac: Fix unexpected interrupt with CONFIG_EARLY_PRINTK
2013-05-31m68k/mac: Fix unexpected interrupt with CONFIG_EARLY_PRINTKFinn Thain
The present code does not wait for the SCC to finish resetting itself before trying to initialise the device. The result is that the SCC interrupt sources become enabled (if they weren't already). This leads to an early boot crash (unexpected interrupt) given CONFIG_EARLY_PRINTK. Fix this by adding a delay. A successful reset disables the interrupt sources. Also, after the reset for channel A setup, the SCC then gets a second reset for channel B setup which leaves channel A uninitialised again. Fix this by performing the reset only once. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Cc: stable@vger.kernel.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-05-29m68k: only use local gpio_request_one if not using GPIOLIBGreg Ungerer
Compiling for targets that use the local gpio code (not GPIOLIB) fail to compile with: CC arch/m68k/platform/coldfire/device.o In file included from include/linux/gpio.h:45:0, from arch/m68k/platform/coldfire/device.c:15: /home/gerg/new-wave.git/linux-3.x/arch/m68k/include/asm/gpio.h:89:19: error: static declaration of ‘gpio_request_one’ follows non-static declaration include/asm-generic/gpio.h:195:12: note: previous declaration of ‘gpio_request_one’ was here Fix by conditionally using the local gpio_request_one() function based on !CONFIG_GPIOLIB. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-05-28m68k: Update defconfigs for v3.9Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-05-21m68k: implement futex.h to support userspace robust futexes and PI mutexesMikael Pettersson
Linux/M68K currently doesn't support robust futexes or PI mutexes. The problem is that the futex code needs to perform certain ops (cmpxchg, set, add, or, andn, xor) atomically on user-space addresses, and M68K's lack of a futex.h causes those operations to be unsupported and disabled. This patch adds that support, but only for uniprocessor machines, which is adequate for M68K. For UP it's enough to disable preemption to ensure mutual exclusion (futexes don't need to care about other hardware agents), and the mandatory pagefault_disable() does just that. This patch is closely based on the one I co-wrote for UP ARM back in August 2008. The main change is that this patch uses the C get_user/put_user accessors instead of inline assembly code with exception table fixups. For non-MMU machines the new futex.h simply redirects to the generic futex.h, so there is no functional change for them. Tested on aranym with the glibc-2.17 test suite: no regressions, and a number of mutex/condvar test cases went from failing to succeeding (tst-mutexpi{5,5a,6,9}, tst-cond2[45], tst-robust[1-9], tst-robustpi[1-8]). Also tested with glibc-2.18 HEAD and a local glibc patch to enable PI mutexes: no regressions. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Acked-by: Andreas Schwab <schwab@linux-m68k.org> [geert: Added removal of ""generic-y += futex.h"] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-05-10Merge tag 'for-linus-20130509' of git://git.infradead.org/~dwmw2/random-2.6Linus Torvalds
Pull misc fixes from David Woodhouse: "This is some miscellaneous cleanups that don't really belong anywhere else (or were ignored), that have been sitting in linux-next for some time. Two of them are fixes resulting from my audit of krealloc() usage that don't seem to have elicited any response when I posted them, and the other three are patches from Artem removing dead code." * tag 'for-linus-20130509' of git://git.infradead.org/~dwmw2/random-2.6: pcmcia: remove RPX board stuff m68k: remove rpxlite stuff pcmcia: remove Motorola MBX860 support params: Fix potential memory leak in add_sysfs_param() dell-laptop: Fix krealloc() misuse in parse_da_table()
2013-05-10Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu updates from Greg Ungerer: "The bulk of the changes are generalizing the ColdFire v3 core support and adding in 537x CPU support. Also a couple of other bug fixes, one to fix a reintroduction of a past bug in the romfs filesystem nommu support." * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: enable Timer on coldfire 532x m68knommu: fix ColdFire 5373/5329 QSPI base address m68knommu: add support for configuring a Freescale M5373EVB board m68knommu: add support for the ColdFire 537x family of CPUs m68knommu: make ColdFire M532x platform support more v3 generic m68knommu: create and use a common M53xx ColdFire class of CPUs m68k: remove unused asm/dbg.h m68k: Set ColdFire ACR1 cache mode depending on kernel configuration romfs: fix nommu map length to keep inside filesystem m68k: clean up unused "config ROMVECSIZE"
2013-05-09Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull compat cleanup from Al Viro: "Mostly about syscall wrappers this time; there will be another pile with patches in the same general area from various people, but I'd rather push those after both that and vfs.git pile are in." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: syscalls.h: slightly reduce the jungles of macros get rid of union semop in sys_semctl(2) arguments make do_mremap() static sparc: no need to sign-extend in sync_file_range() wrapper ppc compat wrappers for add_key(2) and request_key(2) are pointless x86: trim sys_ia32.h x86: sys32_kill and sys32_mprotect are pointless get rid of compat_sys_semctl() and friends in case of ARCH_WANT_OLD_COMPAT_IPC merge compat sys_ipc instances consolidate compat lookup_dcookie() convert vmsplice to COMPAT_SYSCALL_DEFINE switch getrusage() to COMPAT_SYSCALL_DEFINE switch epoll_pwait to COMPAT_SYSCALL_DEFINE convert sendfile{,64} to COMPAT_SYSCALL_DEFINE switch signalfd{,4}() to COMPAT_SYSCALL_DEFINE make SYSCALL_DEFINE<n>-generated wrappers do asmlinkage_protect make HAVE_SYSCALL_WRAPPERS unconditional consolidate cond_syscall and SYSCALL_ALIAS declarations teach SYSCALL_DEFINE<n> how to deal with long long/unsigned long long get rid of duplicate logics in __SC_....[1-6] definitions
2013-04-30dump_stack: consolidate dump_stack() implementations and unify their behaviorsTejun Heo
Both dump_stack() and show_stack() are currently implemented by each architecture. show_stack(NULL, NULL) dumps the backtrace for the current task as does dump_stack(). On some archs, dump_stack() prints extra information - pid, utsname and so on - in addition to the backtrace while the two are identical on other archs. The usages in arch-independent code of the two functions indicate show_stack(NULL, NULL) should print out bare backtrace while dump_stack() is used for debugging purposes when something went wrong, so it does make sense to print additional information on the task which triggered dump_stack(). There's no reason to require archs to implement two separate but mostly identical functions. It leads to unnecessary subtle information. This patch expands the dummy fallback dump_stack() implementation in lib/dump_stack.c such that it prints out debug information (taken from x86) and invokes show_stack(NULL, NULL) and drops arch-specific dump_stack() implementations in all archs except blackfin. Blackfin's dump_stack() does something wonky that I don't understand. Debug information can be printed separately by calling dump_stack_print_info() so that arch-specific dump_stack() implementation can still emit the same debug information. This is used in blackfin. This patch brings the following behavior changes. * On some archs, an extra level in backtrace for show_stack() could be printed. This is because the top frame was determined in dump_stack() on those archs while generic dump_stack() can't do that reliably. It can be compensated by inlining dump_stack() but not sure whether that'd be necessary. * Most archs didn't use to print debug info on dump_stack(). They do now. An example WARN dump follows. WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505() Hardware name: empty Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #9 0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48 ffffffff8108f50f ffffffff82228240 0000000000000040 ffffffff8234a03c 0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58 Call Trace: [<ffffffff81c614dc>] dump_stack+0x19/0x1b [<ffffffff8108f50f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff8108f56a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8234a071>] init_workqueues+0x35/0x505 ... v2: CPU number added to the generic debug info as requested by s390 folks and dropped the s390 specific dump_stack(). This loses %ksp from the debug message which the maintainers think isn't important enough to keep the s390-specific dump_stack() implementation. dump_stack_print_info() is moved to kernel/printk.c from lib/dump_stack.c. Because linkage is per objecct file, dump_stack_print_info() living in the same lib file as generic dump_stack() means that archs which implement custom dump_stack() - at this point, only blackfin - can't use dump_stack_print_info() as that will bring in the generic version of dump_stack() too. v1 The v1 patch broke build on blackfin due to this issue. The build breakage was reported by Fengguang Wu. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390 bits] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon bits] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k update from Geert Uytterhoeven. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Remove inline strlen() implementation m68k/atari: USB - add platform devices for EtherNAT/NetUSBee ISP1160 HCD m68k: Implement ndelay() based on the existing udelay() logic m68k/atari: EtherNAT - add interrupt chip definition for CPLD interrupts m68k/atari: EtherNEC - add platform device support m68k/atari: EtherNAT - platform device and IRQ support code m68k/atari: use dedicated irq_chip for timer D interrupts m68k/atari: ROM port ISA adapter support m68k: Add missing cmpxchg64() if CONFIG_RMW_INSNS=y
2013-04-30Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP/hotplug changes from Ingo Molnar: "This is a pretty large, multi-arch series unifying and generalizing the various disjunct pieces of idle routines that architectures have historically copied from each other and have grown in random, wildly inconsistent and sometimes buggy directions: 101 files changed, 455 insertions(+), 1328 deletions(-) this went through a number of review and test iterations before it was committed, it was tested on various architectures, was exposed to linux-next for quite some time - nevertheless it might cause problems on architectures that don't read the mailing lists and don't regularly test linux-next. This cat herding excercise was motivated by the -rt kernel, and was brought to you by Thomas "the Whip" Gleixner." * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) idle: Remove GENERIC_IDLE_LOOP config switch um: Use generic idle loop ia64: Make sure interrupts enabled when we "safe_halt()" sparc: Use generic idle loop idle: Remove unused ARCH_HAS_DEFAULT_IDLE bfin: Fix typo in arch_cpu_idle() xtensa: Use generic idle loop x86: Use generic idle loop unicore: Use generic idle loop tile: Use generic idle loop tile: Enter idle with preemption disabled sh: Use generic idle loop score: Use generic idle loop s390: Use generic idle loop powerpc: Use generic idle loop parisc: Use generic idle loop openrisc: Use generic idle loop mn10300: Use generic idle loop mips: Use generic idle loop microblaze: Use generic idle loop ...
2013-04-29mm/m68k: use common help functions to free reserved pagesJiang Liu
Use common help functions to free reserved pages. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29m68knommu: enable Timer on coldfire 532xGreg Ungerer
This patch enables the initial Timer on coldfire 532x systems. Without this, the scheduler will not be triggered and the system hangs, after all sequential code is executed. It should also apply on later kernel versions. Signed-off-by: Christian Gieseler <christiangieseler@yahoo.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-04-29m68knommu: fix ColdFire 5373/5329 QSPI base addressGreg Ungerer
The base address of the QSPI hardware module should be 0xFC05C000. Fix its definition. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-04-29m68knommu: add support for configuring a Freescale M5373EVB boardGreg Ungerer
Add a configuration switch for supporting the Freescale M5373EVB board. It is based on the newly added ColdFire 537x CPU support. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-04-29m68knommu: add support for the ColdFire 537x family of CPUsGreg Ungerer
The ColdFire 537x family is very similar internally to the ColdFire 532x family. So with just a little extra configuration we can configure and target them as well. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-04-29m68knommu: make ColdFire M532x platform support more v3 genericGreg Ungerer
The M532x CPU platform support can be used on more ColdFire CPU families than just the 532x types. So rename and reconfigure it to reflect that. The ColdFire 537x family has virtualy identical internals to the 532x, and so it will be able to share this code when we add support for them. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-04-29m68knommu: create and use a common M53xx ColdFire class of CPUsGreg Ungerer
The current CONFIG_M532x support definitions are actually common to a larger set of version 3 ColdFire CPU types. In the future we want to add support for the 537x family. It is very similar to the 532x internally, and will be able to use most of the same definitions. Create a CONFIG_M53xx option that is enabled to support any of the common 532x and 537x CPU types. Convert the current users of CONFIG_M532x to use CONFIG_M53xx instead. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-04-29m68k: remove unused asm/dbg.hGreg Ungerer
The contents of the m68k asm/dbg.h are never used, remove the file and remove the one reference to it. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-29m68k: Set ColdFire ACR1 cache mode depending on kernel configurationStany MARCEL
For coldfire with MMU enabled, data cache did not follow the configuration but was configured in writethrough mode. Signed-off-by: Stany MARCEL <stany.marcel@novasys-ingenierie.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-04-29m68k: clean up unused "config ROMVECSIZE"Paul Bolle
Kconfig symbol ROMVECSIZE is unused since commit f84f52a5c15db7d14a534815f27253b001735183 ("m68knommu: clean up linker script"). Let's clean up its Kconfig entry too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-04-17idle: Remove GENERIC_IDLE_LOOP config switchThomas Gleixner
All archs are converted over. Remove the config switch and the fallback code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-16m68k: Remove inline strlen() implementationMichal Marek
GCC can replace a strncat() call with constant second argument into a strlen + store, which results in a link error: ERROR: "strlen" [net/ipv4/ip_tunnel.ko] undefined! The inline function is a simple for loop in C. Other architectures either use an asm optimized variant, or use the generic function from lib/string.c. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16m68k/atari: USB - add platform devices for EtherNAT/NetUSBee ISP1160 HCDMichael Schmitz
Add platform devices used by the isp116x-hcd driver for EtherNAT and NetUSBee. Note that the NetUSBee also contains a RTL8019 Ethernet chip, so its platform device is used to cover the EtherNEC case, too. Register definitions thanks to David Galvez <dgalvez75@gmail.com> [Geert] Conditionalize isp1160_delay() definition Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16m68k: Implement ndelay() based on the existing udelay() logicMichael Schmitz
Add a ndelay macro modeled after the Coldfire udelay(). The ISP1160 driver needs a 150ns delay, so we need to have ndelay(). Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16m68k/atari: EtherNAT - add interrupt chip definition for CPLD interruptsMichael Schmitz
Add a dedicated interrupt chip definition for the EtherNAT CPLD interrupts. SMC91C111 and ISP1160 chips have separate interrupts that can be enabled and disabled in a CPLD register at offset 0x23 from the card base. Note the CPLD interrupt control register is mapped on demand, whenever any interrupt enable/disable action is requested. The EtherNAT USB driver still needs interrupts disabled around reset and start actions. In particular, we cannot entirely rely on the irq_startup being called first. The smc91x and isp116x-hcd drivers will use this feature. Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16m68k/atari: EtherNEC - add platform device supportMichael Schmitz
Add platform device for the Atari ROM port ethernet adapter, EtherNEC. This platform device will be used by the ne.c driver. [Geert] Conditionalize platform device data structures Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16m68k/atari: EtherNAT - platform device and IRQ support codeMichael Schmitz
Add platform device and interrupt definitions necessary for the EtherNAT Ethernet/USB adapter for the Falcon extension port. EtherNAT interrupt numbers are 139/140 so the max. interrupt number for Atari has to be increased. [Geert] Conditionalize platform device data structures Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16m68k/atari: use dedicated irq_chip for timer D interruptsMichael Schmitz
Add a special irq_chip for the Atari MFP timer D interrupt, which is used as a polling timer for EtherNEC and NetUSBee Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16m68k/atari: ROM port ISA adapter supportMichael Schmitz
Atari ROM port ISA adapter support for EtherNEC and NetUSBee adapters 16 bit access for ROM port adapters follows debugging and clarification by David Galvez <dgalvez75@gmail.com>. The NetUSBee ISP1160 USB chip uses these macros. Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16m68k: Add missing cmpxchg64() if CONFIG_RMW_INSNS=yGeert Uytterhoeven
If CONFIG_RMW_INSNS=y: drivers/block/blockconsole.c: In function ‘bcon_advance_console_bytes’: drivers/block/blockconsole.c:164: error: implicit declaration of function ‘cmpxchg64’ Map cmpxchg64 to cmpxchg64_local, which is already mapped to __cmpxchg64_local_generic, just like for the CONFIG_RMW_INSNS=n case. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-16Remove GENERIC_GPIO config optionAlexandre Courbot
GENERIC_GPIO has been made equivalent to GPIOLIB in architecture code and all driver code has been switch to depend on GPIOLIB. It is thus safe to have GENERIC_GPIO removed. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-09m68k: define a local gpio_request_one() functionGreg Ungerer
Compiling for linux-3.9-rc1 and later fails with: drivers/gpio/devres.c: In function 'devm_gpio_request_one': drivers/gpio/devres.c:90:2: error: implicit declaration of function 'gpio_request_one' [-Werror=implicit-function-declaration] So provide a local gpio_request_one() function. Code largely borrowed from blackfin's local gpio_request_one() function. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08m68k: Use generic idle loopThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Link: http://lkml.kernel.org/r/20130321215234.535485189@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-05m68k: remove rpxlite stuffArtem Bityutskiy
The CONFIG_RPXLITE is not defined anywhere, which means that this board is not supported anyway, and we can clean-up commproc.h a little. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: linux-pcmcia@lists.infradead.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-03-21m68k: coldfire: use gpiolibAlexandre Courbot
Force use of gpiolib for Coldfire, as a step towards the deprecation of GENERIC_GPIO. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Greg Ungerer <gerg@uclinux.org>
2013-03-12Select VIRT_TO_BUS directly where neededStephen Rothwell
In commit 887cbce0adea ("arch Kconfig: centralise ARCH_NO_VIRT_TO_BUS") I introduced the config sybmol HAVE_VIRT_TO_BUS and selected that where needed. I am not sure what I was thinking. Instead, just directly select VIRT_TO_BUS where it is needed. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-06m68k: drop "select EMAC_INC"Paul Bolle
Somehow this select statement managed to squeeze itself between commit 0e152d80507b75c00aac60f2ffc586360687cd52 ("m68k: reorganize Kconfig options to improve mmu/non-mmu selections") and commit 95e82747d6e2abc513bfae416e6009968985d05b ("m68k: drop unused Kconfig symbols"). Whatever happened, there is no Kconfig symbol named EMAC_INC. The select statement for that symbol is a nop. Drop it. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-03-04m68knommu: fix misnamed GPIO pin definition for ColdFire 528x CPUGreg Ungerer
Compiling for a ColdFire 528x CPU will result in: arch/m68k/platform/coldfire/m528x.c: In function ‘m528x_uarts_init’: arch/m68k/platform/coldfire/m528x.c:72: error: ‘MCF5282_GPIO_PUAPAR’ undeclared (first use in this function) arch/m68k/platform/coldfire/m528x.c:72: error: (Each undeclared identifier is reported only once arch/m68k/platform/coldfire/m528x.c:72: error: for each function it appears in.) The MCF5282_GPIO_PUAPAR definition changed names in the ColdFire definitions cleanup. It is now MCFGPIO_PUAPAR, so change it. Not sure how this one got missed, 2 lines below it is the correct use of this definition. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-03-03consolidate cond_syscall and SYSCALL_ALIAS declarationsAl Viro
take them to asm/linkage.h, with default in linux/linkage.h Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-04m68knommu: fix MC68328.h definesLuis Alves
This patch fixes some broken #define's in the MC68328.h file. Most of them are whitespaces and one is an incorrect define of TCN. Signed-off-by: Luis Alves <ljalvs@gmail.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-03-04m68knommu: fix build when CPU is not coldfireThadeu Lima de Souza Cascardo
Commit dd1cb3a7c43508c29e17836628090c0735bd3137 [merge MMU and non-MMU versions of mm/init.c] unified mm/init.c for both MMU and non-MMU m68k platforms. However, it broke when we build a non-MMU M68K Classic CPU kernel. This fix builds a section that came from the MMU version only when we are building a MMU kernel. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-03-04m68knommu: add CPU_NAME for 68000Luis Alves
This patch adds the correct CPU name. Without this, it just displays UNKNOWN at boot time and at '/proc/cpuinfo'. Signed-off-by: Luis Alves <ljalvs@gmail.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-02-27arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUSStephen Rothwell
Change it to CONFIG_HAVE_VIRT_TO_BUS and set it in all architecures that already provide virt_to_bus(). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: H Hartley Sweeten <hartleys@visionengravers.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-26default SET_PERSONALITY() in linux/elf.hAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>