aboutsummaryrefslogtreecommitdiff
path: root/arch/microblaze
AgeCommit message (Collapse)Author
2011-05-28Merge branch 'setns'Linus Torvalds
* setns: ns: Wire up the setns system call Done as a merge to make it easier to fix up conflicts in arm due to addition of sendmmsg system call
2011-05-28ns: Wire up the setns system callEric W. Biederman
32bit and 64bit on x86 are tested and working. The rest I have looked at closely and I can't find any problems. setns is an easy system call to wire up. It just takes two ints so I don't expect any weird architecture porting problems. While doing this I have noticed that we have some architectures that are very slow to get new system calls. cris seems to be the slowest where the last system calls wired up were preadv and pwritev. avr32 is weird in that recvmmsg was wired up but never declared in unistd.h. frv is behind with perf_event_open being the last syscall wired up. On h8300 the last system call wired up was epoll_wait. On m32r the last system call wired up was fallocate. mn10300 has recvmmsg as the last system call wired up. The rest seem to at least have syncfs wired up which was new in the 2.6.39. v2: Most of the architecture support added by Daniel Lezcano <dlezcano@fr.ibm.com> v3: ported to v2.6.36-rc4 by: Eric W. Biederman <ebiederm@xmission.com> v4: Moved wiring up of the system call to another patch v5: ported to v2.6.39-rc6 v6: rebased onto parisc-next and net-next to avoid syscall conflicts. v7: ported to Linus's latest post 2.6.39 tree. >  arch/blackfin/include/asm/unistd.h     |    3 ++- >  arch/blackfin/mach-common/entry.S      |    1 + Acked-by: Mike Frysinger <vapier@gentoo.org> Oh - ia64 wiring looks good. Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits) ARM: 6945/1: Add unwinding support for division functions ARM: kill pmd_off() ARM: 6944/1: mm: allow ASID 0 to be allocated to tasks ARM: 6943/1: mm: use TTBR1 instead of reserved context ID ARM: 6942/1: mm: make TTBR1 always point to swapper_pg_dir on ARMv6/7 ARM: 6941/1: cache: ensure MVA is cacheline aligned in flush_kern_dcache_area ARM: add sendmmsg syscall ARM: 6863/1: allow hotplug on msm ARM: 6832/1: mmci: support for ST-Ericsson db8500v2 ARM: 6830/1: mach-ux500: force PrimeCell revisions ARM: 6829/1: amba: make hardcoded periphid override hardware ARM: 6828/1: mach-ux500: delete SSP PrimeCell ID ARM: 6827/1: mach-netx: delete hardcoded periphid ARM: 6940/1: fiq: Briefly document driver responsibilities for suspend/resume ARM: 6938/1: fiq: Refactor {get,set}_fiq_regs() for Thumb-2 ARM: 6914/1: sparsemem: fix highmem detection when using SPARSEMEM ARM: 6913/1: sparsemem: allow pfn_valid to be overridden when using SPARSEMEM at91: drop at572d940hf support at91rm9200: introduce at91rm9200_set_type to specficy cpu package at91: drop boot_params and PLAT_PHYS_OFFSET ...
2011-05-27Merge branches 'devel', 'devel-stable' and 'fixes' into for-linusRussell King
2011-05-26arch: remove CONFIG_GENERIC_FIND_{NEXT_BIT,BIT_LE,LAST_BIT}Akinobu Mita
By the previous style change, CONFIG_GENERIC_FIND_NEXT_BIT, CONFIG_GENERIC_FIND_BIT_LE, and CONFIG_GENERIC_FIND_LAST_BIT are not used to test for existence of find bitops anymore. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25mm: now that all old mmu_gather code is gone, remove the storagePeter Zijlstra
Fold all the mmu_gather rework patches into one for submission Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Reported-by: Hugh Dickins <hughd@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Tony Luck <tony.luck@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25Merge branch 'devicetree/arm-next' of git://git.secretlab.ca/git/linux-2.6 ↵Russell King
into devel-stable
2011-05-14Merge branch 'consolidate-clksrc-i8253' of ↵Thomas Gleixner
master.kernel.org:~rmk/linux-2.6-arm into timers/clocksource Conflicts: arch/ia64/kernel/cyclone.c arch/mips/kernel/i8253.c arch/x86/kernel/i8253.c Reason: Resolve conflicts so further cleanups do not conflict further Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-11dt/flattree: explicitly pass command line pointer to early_init_dt_scan_chosenGrant Likely
This patch drops the reference to a global 'cmd_line' variable from early_init_dt_scan_chosen, and instead passes the pointer to the command line string via the *data argument. Each architecture does something slightly different with the initial command line, so it makes sense for the architecture to be able to specify the variable name. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-04-13usb: Fix Kconfig unmet dependencies for Microblaze EHCIMichal Simek
Disable USB_ARCH_HAS_EHCI in arch Kconfig and enable it in usb Kconfig Warning log: warning: (MICROBLAZE) selects USB_ARCH_HAS_EHCI which has unmet direct dependencies (USB_SUPPORT) Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-07Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings
2011-04-04Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix ftrace microblaze: Wire up new syscalls microblaze: Fix level/edge irq sensibility
2011-04-01microblaze: Fix ftraceMichal Simek
- Do not trace idle loop which takes a lot time - Fix cache handling in generic ftrace code - Do not trace lib functions ashldi3, ashrdi3, lshrdi3 Functions are called from generic ftrace code which can't be traced Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-04-01microblaze: Wire up new syscallsMichal Simek
Hook up name_to_handle_at, open_by_handle_at, clock_adjtime, syncfs Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-04-01microblaze: Fix level/edge irq sensibilityMichal Simek
Patches: "microblaze: Convert to new irq function names" sha (4adc192ec7d977c74c750320f289af9d61c1caca) and "microblaze: Use generic show_interrupts()" sha(9d61c18b25726306c9231428c17db42e3ff29ba7) should also setup edge/level in irq_set_chip_and_handler_name name parameter. Error log: ~ # cat /proc/interrupts CPU0 2: 2 Xilinx INTC-Xilinx INTC eth0 3: 2 Xilinx INTC-Xilinx INTC eth0 4: 241 Xilinx INTC-Xilinx INTC timer 6: 108 Xilinx INTC-Xilinx INTC serial Fixed: ~ # cat /proc/interrupts CPU0 2: 2 Xilinx INTC-level eth0 3: 2 Xilinx INTC-level eth0 4: 238 Xilinx INTC-edge timer 6: 108 Xilinx INTC-level serial Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Thomas Gleixner <tglx@linutronix.de> --- v2: Fix exchanged edge and level
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-30genirq: Remove the now obsolete config options and select statementsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29microblaze: Use generic show_interrupts()Thomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29microblaze: Convert to new irq function namesThomas Gleixner
Namespace conversion scripted with coccinelle. Also retrieve the irq type from irq_data in intc_enable_or_unmask() Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-23bitops: introduce CONFIG_GENERIC_FIND_BIT_LEAkinobu Mita
This introduces CONFIG_GENERIC_FIND_BIT_LE to tell whether to use generic implementation of find_*_bit_le() in lib/find_next_bit.c or not. For now we select CONFIG_GENERIC_FIND_BIT_LE for all architectures which enable CONFIG_GENERIC_FIND_NEXT_BIT. But m68knommu wants to define own faster find_next_zero_bit_le() and continues using generic find_next_{,zero_}bit(). (CONFIG_GENERIC_FIND_NEXT_BIT and !CONFIG_GENERIC_FIND_BIT_LE) Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-20Merge branch 'trivial' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits) video: change to new flag variable scsi: change to new flag variable rtc: change to new flag variable rapidio: change to new flag variable pps: change to new flag variable net: change to new flag variable misc: change to new flag variable message: change to new flag variable memstick: change to new flag variable isdn: change to new flag variable ieee802154: change to new flag variable ide: change to new flag variable hwmon: change to new flag variable dma: change to new flag variable char: change to new flag variable fs: change to new flag variable xtensa: change to new flag variable um: change to new flag variables s390: change to new flag variable mips: change to new flag variable ... Fix up trivial conflict in drivers/hwmon/Makefile
2011-03-17microblaze: change to new flag variablematt mooney
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-03-16Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: (21 commits) tty: serial: altera_jtaguart: Add device tree support tty: serial: altera_uart: Add devicetree support dt: eliminate of_platform_driver shim code dt: Eliminate of_platform_{,un}register_driver dt/serial: Eliminate users of of_platform_{,un}register_driver dt/usb: Eliminate users of of_platform_{,un}register_driver dt/video: Eliminate users of of_platform_{,un}register_driver dt/net: Eliminate users of of_platform_{,un}register_driver dt/sound: Eliminate users of of_platform_{,un}register_driver dt/spi: Eliminate users of of_platform_{,un}register_driver dt: uartlite: merge platform and of_platform driver bindings dt: xilinx_hwicap: merge platform and of_platform driver bindings ipmi: convert OF driver to platform driver leds/leds-gpio: merge platform_driver with of_platform_driver dt/sparc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: move of_bus_type infrastructure to ibmebus drivercore/dt: add a match table pointer to struct device dt: Typo fix. altera_ps2: Add devicetree support ...
2011-03-16Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: (33 commits) microblaze: Do not copy reset vectors/manual reset vector setup microblaze: Fix _reset function microblaze: Fix microblaze init vectors microblaze: Fix circular headers dependency when ftrace is enabled. microblaze: Fix typo in Kconfig microblaze: Add missing export symbols for lib functions microblaze: Fix /dev/zero corruption from __clear_user() microblaze: Convert irq_chip to new functions microblaze: Select GENERIC_HARDIRQS_NO_DEPRECATED microblaze: Remove stale irq_chip.end microblaze: Fix sparse warnings - signal.c microblaze: Fix sparse warning - fault.c microblaze: Fix missing microblaze specific syscalls declaration microblaze: Fix sparse warnings - cache.c microblaze: Fix sparse warning - cpuinfo.h microblaze: Fix sparse warning - unwind.c microblaze: Fix sparse warning - consistent_alloc function microblaze: Fix sparse warnings - ptrace microblaze: Fix sparse warning - sw_exceptions microblaze: Fix sparse warning - timer.c ...
2011-03-15Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (27 commits) x86: Clean up apic.c and apic.h x86: Remove superflous goal definition of tsc_sync x86: dt: Correct local apic documentation in device tree bindings x86: dt: Cleanup local apic setup x86: dt: Fix OLPC=y/INTEL_CE=n build rtc: cmos: Add OF bindings x86: ce4100: Use OF to setup devices x86: ioapic: Add OF bindings for IO_APIC x86: dtb: Add generic bus probe x86: dtb: Add support for PCI devices backed by dtb nodes x86: dtb: Add device tree support for HPET x86: dtb: Add early parsing of IO_APIC x86: dtb: Add irq domain abstraction x86: dtb: Add a device tree for CE4100 x86: Add device tree support x86: e820: Remove conditional early mapping in parse_e820_ext x86: OLPC: Make OLPC=n build again x86: OLPC: Remove extra OLPC_OPENFIRMWARE_DT indirection x86: OLPC: Cleanup config maze completely x86: OLPC: Hide OLPC_OPENFIRMWARE config switch ... Fix up conflicts in arch/x86/platform/ce4100/ce4100.c
2011-03-15microblaze: Do not copy reset vectors/manual reset vector setupMichal Simek
Reset vector can be setup by bootloader and kernel doens't need to touch it. If you require to setup reset vector, please use CONFIG_MANUAL_RESET_VECTOR throught menuconfig. It is not possible to setup address 0x0 as reset address because make no sense to set it up at all. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: John Williams <john.williams@petalogix.com>
2011-03-15microblaze: Fix _reset functionMichal Simek
If soft reset falls through with no hardware assisted reset, the best we can do is jump to the reset vector and see what the bootloader left for us. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: John Williams <john.williams@petalogix.com>
2011-03-15microblaze: Fix microblaze init vectorsMichal Simek
Microblaze vector table stores several vectors (reset, user exception, interrupt, debug exception and hardware exception). All these functions can be below address 0x10000. If they are, wrong vector table is genarated because jump is not setup from two instructions (imm upper 16bit and brai lower 16bit). Adding specific offset prevent problem if address is below 0x10000. For this case only brai instruction is used. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-11futex: Sanitize futex ops argument typesMichel Lespinasse
Change futex_atomic_op_inuser and futex_atomic_cmpxchg_inatomic prototypes to use u32 types for the futex as this is the data type the futex core code uses all over the place. Signed-off-by: Michel Lespinasse <walken@google.com> Cc: Darren Hart <darren@dvhart.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <20110311025058.GD26122@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-11futex: Sanitize cmpxchg_futex_value_locked APIMichel Lespinasse
The cmpxchg_futex_value_locked API was funny in that it returned either the original, user-exposed futex value OR an error code such as -EFAULT. This was confusing at best, and could be a source of livelocks in places that retry the cmpxchg_futex_value_locked after trying to fix the issue by running fault_in_user_writeable(). This change makes the cmpxchg_futex_value_locked API more similar to the get_futex_value_locked one, returning an error code and updating the original value through a reference argument. Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> [tile] Acked-by: Tony Luck <tony.luck@intel.com> [ia64] Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michal Simek <monstr@monstr.eu> [microblaze] Acked-by: David Howells <dhowells@redhat.com> [frv] Cc: Darren Hart <darren@dvhart.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <20110311024851.GC26122@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-10microblaze: Fix circular headers dependency when ftrace is enabled.Michal Simek
Remove compilation failure when ftrace in enabled. Error log: CC kernel/trace/power-traces.o In file included from arch/microblaze/include/asm/irq.h:15, from include/linux/irq.h:27, from include/asm-generic/hardirq.h:12, from arch/microblaze/include/asm/hardirq.h:15, from include/linux/hardirq.h:7, from include/linux/ftrace_event.h:7, from include/trace/ftrace.h:19, from include/trace/define_trace.h:96, from include/trace/events/power.h:240, from kernel/trace/power-traces.c:14: include/linux/interrupt.h: In function '__raise_softirq_irqoff': include/linux/interrupt.h:413: error: implicit declaration of function 'trace_softirq_raise' In file included from include/trace/ftrace.h:554, from include/trace/define_trace.h:96, from include/trace/events/power.h:240, from kernel/trace/power-traces.c:14: include/trace/events/irq.h: In function 'ftrace_test_probe_irq_handler_entry': include/trace/events/irq.h:37: error: implicit declaration of function 'check_trace_callback_type_irq_handler_entry' include/trace/events/irq.h: In function 'ftrace_test_probe_irq_handler_exit': include/trace/events/irq.h:67: error: implicit declaration of function 'check_trace_callback_type_irq_handler_exit' include/trace/events/irq.h: In function 'ftrace_test_probe_softirq_entry': include/trace/events/irq.h:112: error: implicit declaration of function 'check_trace_callback_type_softirq_entry' include/trace/events/irq.h: In function 'ftrace_test_probe_softirq_exit': include/trace/events/irq.h:126: error: implicit declaration of function 'check_trace_callback_type_softirq_exit' include/trace/events/irq.h: In function 'ftrace_test_probe_softirq_raise': include/trace/events/irq.h:140: error: implicit declaration of function 'check_trace_callback_type_softirq_raise' make[5]: *** [kernel/trace/power-traces.o] Error 1 make[4]: *** [kernel/trace] Error 2 make[3]: *** [kernel] Error 2 Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Fix typo in KconfigTobias Klauser
s/Exectuable/Executable/ Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2011-03-09microblaze: Add missing export symbols for lib functionsMichal Simek
Adding missing export symbols for loadable modules. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Fix /dev/zero corruption from __clear_user()Steven J. Magnani
A userland read of more than PAGE_SIZE bytes from /dev/zero results in (a) not all of the bytes returned being zero, and (b) memory corruption due to zeroing of bytes beyond the user buffer. This is caused by improper constraints on the assembly __clear_user function. The constrints don't indicate to the compiler that the pointer argument is modified. Since the function is inline, this results in double-incrementing of the pointer when __clear_user() is invoked through a multi-page read() of /dev/zero. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Acked-by: Michal Simek <monstr@monstr.eu> CC: stable@kernel.org
2011-03-09microblaze: Convert irq_chip to new functionsThomas Gleixner
Use proper irq_desc wrappers while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Select GENERIC_HARDIRQS_NO_DEPRECATEDThomas Gleixner
All irq_chips converted. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-09microblaze: Remove stale irq_chip.endThomas Gleixner
irq_chip.end got obsolete with the removal of __do_IRQ(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Michal Simek <monstr@monstr.eu> LKML-Reference: <20110203004210.240154507@linutronix.de>
2011-03-09microblaze: Fix sparse warnings - signal.cMichal Simek
Warning log: CHECK arch/microblaze/kernel/signal.c arch/microblaze/kernel/signal.c:200:9: warning: Using plain integer as NULL pointer arch/microblaze/kernel/signal.c:201:9: warning: incorrect type in initializer (different address spaces) arch/microblaze/kernel/signal.c:201:9: expected void [noderef] *volatile __gu_val<asn:1> arch/microblaze/kernel/signal.c:201:9: got void *<noident> Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Fix sparse warning - fault.cMichal Simek
Warning log: CHECK arch/microblaze/mm/fault.c arch/microblaze/mm/fault.c:51:6: warning: incorrect type in initializer (different address spaces) arch/microblaze/mm/fault.c:51:6: expected unknown type 2const [noderef] *__gu_addr<asn:1> arch/microblaze/mm/fault.c:51:6: got unsigned int *<noident> arch/microblaze/mm/fault.c:68:6: warning: symbol 'bad_page_fault' was not declared. Should it be static? Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Fix missing microblaze specific syscalls declarationMichal Simek
Warning log: CHECK arch/microblaze/kernel/sys_microblaze.c arch/microblaze/kernel/sys_microblaze.c:37:17: warning: symbol 'microblaze_vfork' was not declared. Should it be static? arch/microblaze/kernel/sys_microblaze.c:43:17: warning: symbol 'microblaze_clone' was not declared. Should it be static? arch/microblaze/kernel/sys_microblaze.c:50:17: warning: symbol 'microblaze_execve' was not declared. Should it be static? Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Fix sparse warnings - cache.cMichal Simek
Warning log: CHECK arch/microblaze/kernel/cpu/cache.c arch/microblaze/kernel/cpu/cache.c:522:21: warning: symbol 'wb_msr' was not declared. Should it be static? arch/microblaze/kernel/cpu/cache.c:538:21: warning: symbol 'wb_nomsr' was not declared. Should it be static? arch/microblaze/kernel/cpu/cache.c:554:21: warning: symbol 'wt_msr' was not declared. Should it be static? arch/microblaze/kernel/cpu/cache.c:569:21: warning: symbol 'wt_nomsr' was not declared. Should it be static? arch/microblaze/kernel/cpu/cache.c:585:21: warning: symbol 'wt_msr_noirq' was not declared. Should it be static? arch/microblaze/kernel/cpu/cache.c:600:21: warning: symbol 'wt_nomsr_noirq' was not declared. Should it be static? Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Fix sparse warning - cpuinfo.hMichal Simek
Warning log: CHECK arch/microblaze/kernel/cpu/cpuinfo-static.c arch/microblaze/include/asm/cpuinfo.h:101:21: warning: incorrect type in argument 1 (different signedness) arch/microblaze/include/asm/cpuinfo.h:101:21: expected unsigned int const [usertype] *p arch/microblaze/include/asm/cpuinfo.h:101:21: got int *[assigned] val ... Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Fix sparse warning - unwind.cMichal Simek
Warning log: CHECK arch/microblaze/kernel/unwind.c arch/microblaze/kernel/unwind.c:186:6: warning: symbol 'microblaze_unwind_inner' was not declared. Should it be static? Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Fix sparse warning - consistent_alloc functionMichal Simek
Warning in dma.c was caused by incorrect type in consistent_alloc function. Warning log: CHECK arch/microblaze/kernel/dma.c arch/microblaze/kernel/dma.c:53:26: warning: incorrect type in argument 1 (different base types) arch/microblaze/kernel/dma.c:53:26: expected int [signed] gfp arch/microblaze/kernel/dma.c:53:26: got restricted unsigned int [usertype] flag Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Fix sparse warnings - ptraceMichal Simek
Warning log: CHECK arch/microblaze/kernel/ptrace.c arch/microblaze/kernel/ptrace.c:126:11: warning: incorrect type in initializer (different address spaces) arch/microblaze/kernel/ptrace.c:126:11: expected unknown type 2[noderef] *__pu_addr<asn:1> arch/microblaze/kernel/ptrace.c:126:11: got unsigned long *<noident> arch/microblaze/kernel/ptrace.c:134:17: warning: symbol 'do_syscall_trace_enter' was not declared. Should it be static? arch/microblaze/kernel/ptrace.c:157:17: warning: symbol 'do_syscall_trace_leave' was not declared. Should it be static? Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Fix sparse warning - sw_exceptionsMichal Simek
Function sw_exception is linked with asm code. Warning log: CHECK arch/microblaze/kernel/exceptions.c arch/microblaze/kernel/exceptions.c:53:6: warning: symbol 'sw_exception' was not declared. Should it be static? Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Fix sparse warning - timer.cMichal Simek
Variables and init_microblaze_timecounter should be static. Warning log: CHECK arch/microblaze/kernel/timer.c arch/microblaze/kernel/timer.c:41:14: warning: symbol 'freq_div_hz' was not declared. Should it be static? arch/microblaze/kernel/timer.c:42:14: warning: symbol 'timer_clock_freq' was not declared. Should it be static? arch/microblaze/kernel/timer.c:205:12: warning: symbol 'init_microblaze_timecounter' was not declared. Should it be static? Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Fix sparse warning - prom.cMichal Simek
Warning log: CHECK arch/microblaze/kernel/dma.c arch/microblaze/kernel/dma.c:53:26: warning: incorrect type in argument 1 (different base types) arch/microblaze/kernel/dma.c:53:26: expected int [signed] gfp arch/microblaze/kernel/dma.c:53:26: got restricted unsigned int [usertype] flag Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Add support for DMA_BIDIRECTIONALMichal Simek
CDMA requires DMA_BIDIRECTIONAL option. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: trivial: Add one empty lineMichal Simek
Add one empty line to microblaze_ksyms.c. Remove one empty line to cacheflush.h. Signed-off-by: Michal Simek <monstr@monstr.eu>