aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/bcm47xx
AgeCommit message (Collapse)Author
2013-02-22Merge branch 'master' of ↵Ralf Baechle
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into mips-for-linux-next Conflicts: include/linux/ssb/ssb_driver_gige.h Also resolves a logical merge conflict in drivers/net/ethernet/broadcom/- bgmac.c due to change of an API.
2013-02-21Merge branch 'mips-next-3.9' of ↵Ralf Baechle
git://git.linux-mips.org/pub/scm/john/linux-john into mips-for-linux-next
2013-02-15MIPS: BCM47XX: use fallback sprom var for board_{rev,type}Hauke Mehrtens
An SoC normally do not define path variables for board_rev and board_type and the Broadcom SDK also uses the nvram values without a prefix in such cases. Do the same to fill these sprom attributes from nvram and do not leave them empty, because brcmsmac do not like this. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4679/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-15MIPS: BCM47XX: trim the nvram values for parsingHauke Mehrtens
Some nvram values on some devices have a newline character at the end of the value, that caused read errors. Trim the string before reading the number. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4745/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-15MIPS: BCM47XX: add bcm47xx prefix in front of nvram function namesHauke Mehrtens
The nvram functions are exported and used by some normal drivers. To prevent name clashes with ofter parts of the kernel code add a bcm47xx_ prefix in front of the function names and the header file name. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4744/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-15MIPS: BCM47XX: handle different nvram sizesHauke Mehrtens
The old code just worked for nvram with a size of 0x8000 bytes. This patch adds support for reading nvram from partitions of 0xF000 and 0x10000 bytes. There is just 32KB space for the nvram, but most devices do not use the full size and this code reads the first 32KB in that case and prints a warning. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4743/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-15MIPS: BCM47XX: rename early_nvram_init to nvram_initHauke Mehrtens
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4742/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-15MIPS: BCM47XX: nvram add nand flash supportHauke Mehrtens
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4741/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-15MIPS: BCM47XX: return error when init of nvram failedHauke Mehrtens
This makes it possible to handle the case of not being able to read the nvram ram. This could happen when the code searching for the specific flash chip have not run jet. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4740/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-15MIPS: BCM47XX: use common error codes in nvram readsHauke Mehrtens
Instead of using our own error codes use some common codes. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4739/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-15MIPS: bcm47xx: separate functions finding flash window addrRafał Miłecki
Also check if parallel flash is present at all before accessing it and add support for serial flash on BCMA bus. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4738/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Synchronize with 'net' in order to sort out some l2tp, wireless, and ipv6 GRE fixes that will be built on top of in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-01MIPS: Whitespace cleanup.Ralf Baechle
Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-01-16MIPS: BCM47xx: Enable SSB prerequisite SSB_DRIVER_PCICORE.Ralf Baechle
Split of from Arend's patch. Signed-off-by: Arend van Spriel <arend@broadcom.com> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/4759/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-01-16MIPS: BCM47xx: Select GPIOLIB for BCMA on bcm47xx platformArend van Spriel
The Kconfig items BCM47XX_BCMA and BCM47XX_SSB selected respectively BCMA_DRIVER_GPIO and SSB_DRIVER_GPIO. These options depend on GPIOLIB without explicitly selecting it so it results in a warning when GPIOLIB is not set: scripts/kconfig/conf --oldconfig Kconfig warning: (BCM47XX_BCMA) selects BCMA_DRIVER_GPIO ... unmet direct dependencies (BCMA_POSSIBLE && BCMA && GPIOLIB) warning: (BCM47XX_SSB) selects SSB_DRIVER_GPIO ... unmet direct dependencies (SSB_POSSIBLE && SSB && GPIOLIB) which subsequently results in compile errors. Signed-off-by: Arend van Spriel <arend@broadcom.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4759/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-01-11bcma: return the mips irq number in bcma_core_irqNathan Hintz
The irq signal numbers that are send by the cpu are increased by 2 from the number programmed into the mips core by bcma. Return the irq number on which the irqs are send in bcma_core_irq() now. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-14Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "The MIPS bits for 3.8. This also includes a bunch fixes that were sitting in the linux-mips.org git tree for a long time. This pull request contains updates to several OCTEON drivers and the board support code for BCM47XX, BCM63XX, XLP, XLR, XLS, lantiq, Loongson1B, updates to the SSB bus support, MIPS kexec code and adds support for kdump. When pulling this, there are two expected merge conflicts in include/linux/bcma/bcma_driver_chipcommon.h which are trivial to resolve, just remove the conflict markers and keep both alternatives." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (90 commits) MIPS: PMC-Sierra Yosemite: Remove support. VIDEO: Newport Fix console crashes MIPS: wrppmc: Fix build of PCI code. MIPS: IP22/IP28: Fix build of EISA code. MIPS: RB532: Fix build of prom code. MIPS: PowerTV: Fix build. MIPS: IP27: Correct fucked grammar in ops-bridge.c MIPS: Highmem: Fix build error if CONFIG_DEBUG_HIGHMEM is disabled MIPS: Fix potencial corruption MIPS: Fix for warning from FPU emulation code MIPS: Handle COP3 Unusable exception as COP1X for FP emulation MIPS: Fix poweroff failure when HOTPLUG_CPU configured. MIPS: MT: Fix build with CONFIG_UIDGID_STRICT_TYPE_CHECKS=y MIPS: Remove unused smvp.h MIPS/EDAC: Improve OCTEON EDAC support. MIPS: OCTEON: Add definitions for OCTEON memory contoller registers. MIPS: OCTEON: Add OCTEON family definitions to octeon-model.h ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian. MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree. MIPS: Remove usage of CEVT_R4K_LIB config option. ...
2012-12-12MIPS: BCM47XX: remove GPIO driverHauke Mehrtens
Instated of providing an own GPIO driver use the one provided by ssb and bcma. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4592 Acked-by: Florian Fainelli <florian@openwrt.org>
2012-11-09MIPS: BCM47xx: sprom: read values without prefix as fallbackHauke Mehrtens
There are bcma based devices like the Linksys E2000 out there, which do have one ieee80211 core, but no PCIe core and they are using no prefixes for the sprom. In addition some values like boardtype are stored without a prefix for the main SoC chip also when they have an additional PCIe wifi chip with an own boardtype var on some devices. The Ethernet addresses are now also read out correctly without a prefix so calling bcm47xx_fill_sprom_ethernet is not needed any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4364 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: BCM47XX: read sprom without prefix if no ieee80211 coreHauke Mehrtens
If there is no ieee80211 core on the devices like on the BCM4706 read out the sprom and the other data without using a prefix. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4361 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: BCM47xx: read out full board dataHauke Mehrtens
Read out the full board data independently of the sprom version. Now we also get the full boardflags and so on if sromrev is not set and our code would assume a rev 1 device. When a nvram option is not set because it is not there this is no problem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4363 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: BCM47XX: improve memory size detectionHauke Mehrtens
The memory size is detected by finding a place where it repeats in memory. Currently we are just checking when the function prom_init is seen again, but it is better to check for a bigger part of the memory to decrease the chance of wrong results. This should fix a problem we saw in OpenWrt, where the detected available memory decreed on some devices when doing a soft reboot. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4362 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: BCM47XX: ignore last memory pageHauke Mehrtens
Ignoring the last page when ddr size is 128M. Cached accesses to last page is causing the processor to prefetch using address above 128M stepping out of the ddr address space. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4365 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-10-19ssb: move parallel flash config into an own structHauke Mehrtens
This is a preparing step for adding serial flash support. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-19MIPS: BCM47xx: Fix BCMA_DRIVER_PCI_HOSTMODE config dependenciesYoichi Yuasa
warning: (BCM47XX_BCMA) selects BCMA_DRIVER_PCI_HOSTMODE which has unmet direct dependencies (BCMA_POSSIBLE && BCMA && MIPS && BCMA_HOST_PCI) warning: (BCM47XX_BCMA) selects BCMA_DRIVER_PCI_HOSTMODE which has unmet direct dependencies (BCMA_POSSIBLE && BCMA && MIPS && BCMA_HOST_PCI) Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3882/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-05-16bcma: Move initialization of SPROM to prevent overwriteNathan Hintz
The first thing bcm47xx_fill_sprom does is initialize (zero fill) the SPROM. For BCMA SOC, this wipes out any values previously read by bcm47xx_fill_sprom_ethernet (see arch/mips/bcm47xx/setup.c - bcm47xx_get_sprom_bcma). Move the initialization of SPROM so it is called prior to filling in any values. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16MIPS: bcm47xx: read baordrev without prefix from spromHauke Mehrtens
When the boardrev with a prefix is not available, try to read it without a prefix. This is based on code from the Broadcom SDK. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16bcma: add boardinfo structHauke Mehrtens
This struct contains information about the board, the chip is running on. The struct is filled for PCIe devices and SoCs. This information is used by b43 and will be used by brcmsmac soon. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16MIPS: bcm47xx: refactor fetching board dataHauke Mehrtens
Now the fetching of board data also uses nvram_read_u16 and not simple_strtoul any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16ssb: remove rev from boardinfoHauke Mehrtens
Previously the rev contained the revision read from the pci config space and was used as board_rev in the wireless drivers. This is wrong the board_rev is only fetched from the sprom accordingly to the open source part of the Broadcom SDK and brcmsmac. This patch removes the rev from the boardinfo structure and uses the board_rev attribute from sprom instead. This attribute is filled by PCI, PCMCIA, SDIO and SoC code. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05MIPS: BCM47XX: provide sprom to bcma busHauke Mehrtens
On SoCs the sprom is often stored in nvram in the flashchip. This patch registers a sprom fallback callback handler in bcma and provides the sprom needed for this device. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05MIPS: BCM47XX: move and extend sprom parsingHauke Mehrtens
Move the sprom parsing from nvram into sprom.c. There are all values needed for sprom version 1 to 9 read from nvram and there are more sanity checks added. This is based on the sprom parsing in the open source part of the Broadcom SDK. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05MIPS: BCM47XX: return number of written bytes in nvram_getenvHauke Mehrtens
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07MIPS: Fix up inconsistency in panic() string argument.Ralf Baechle
Panic() invokes printk() to add a \n internally, so panic arguments should not themselves end in \n. Panic invocations in arch/mips and elsewhere are inconsistently sometimes terminating in \n, sometimes not. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-31mips: add export.h to files using EXPORT_SYMBOL/THIS_MODULEPaul Gortmaker
Or else we get lots of variations on this: arch/mips/pci/pci.c:330: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' scattered throughout the build. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-08-08bcm47xx: fix irq assignment for new SoCs.Hauke Mehrtens
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08bcm47xx: add support for bcma busHauke Mehrtens
This patch add support for the bcma bus. Broadcom uses only Mips 74K CPUs on the new SoC and on the old ons using ssb bus there are no Mips 74K CPUs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08bcm47xx: make it possible to build bcm47xx without ssb.Hauke Mehrtens
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08bcm47xx: prepare to support different busesHauke Mehrtens
Prepare bcm47xx to support different System buses. Before adding support for bcma it should be possible to build bcm47xx without the need of ssb. With this patch bcm47xx does not directly contain a ssb_bus, but a union contain all the supported system buses. As a SoC just uses one system bus a union is a good choice. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-07Update my e-mail addressMichael Büsch
Signed-off-by: Michael Buesch <m@bues.ch> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-19MIPS: BCM47xx: Extend the filling of SPROM from NVRAMHauke Mehrtens
Some members of the struct ssb_sprom where not filled with data available in the NVRAM. Some attribute names in the NVRAM changed from SPROM version 3 to version 4. This patch was done by analyzing the the pci sprom parser in the ssb code and some open source parts of the braodcom wireless driver used on embedded devices. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2365/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: BCM47xx: Register SSB fallback sprom callbackHauke Mehrtens
We are generating the prefix based on the PCI bus address the device is on. This is done like Broadcom does it in their code expect that the the bus number is increased by one. In the SB bus implementation used by Broadcom the SB bus emulates a PCI bus so the kernel sees one PCI bus more then in our implementation. We do not handle prefixes like sb/1/ yet as they are only used on the new bus which is not implemented yet. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2364/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: BCM47xx: Extend bcm47xx_fill_sprom with prefix.Hauke Mehrtens
When an other SSB based device without an own SPROM is attached, using the PCI bus to the main SSB based device, the data normally found in the SPROM will be stored in the NVRAM on modern devices. The keys, to load the data from the NVRAM, are all using some sort of prefix like pci/1/1/, pci/1/3/ or sb/1/ before the actual key. This patch extends bcm47xx_fill_sprom() to make it possible to read out these values when some prefix was used. The keys for the SPROM data used on the main chip does not have a prefix. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2363/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: BCM47xx: Swap serial console if ttyS1 was specified.Hauke Mehrtens
Some devices like the Netgear WGT634U are using ttyS1 for default console output. We should switch to that console if it was given in the kernel_args parameters. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> To: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/1848/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: BCM47xx: Use sscanf for parsing mac addressHauke Mehrtens
Instead of writing own function for parsing the mac address we now use sscanf. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> To: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/1847/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: BCM47xx: Fill values for b43 into SSB spromHauke Mehrtens
Fill the sprom with all available values from the nvram. Most of these new values are needed for the b43 or b43legacy driver. Parts of this patch have been in OpenWRT for a long time and were written by Michael Buesch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> To: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/1846/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: BCM47xx: Do not read config from CFEHauke Mehrtens
The config options read out here are not stored in CFE but only in NVRAM on the devices. Remove reading from CFE and only access the NVRAM. Reading out CFE does not harm but is useless here. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> To: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/1845/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: BCM47xx: Fix nvram_getenv return value.Hauke Mehrtens
Nvram_getenv should behave like cfe_getenv. cfe_getenv returns 0 on success and -9 if the value was not found. If the input was wrong -8 will be returned by cfe_getenv. Change nvram_getenv to do the same. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: Waldemar Brodkorb <wbx@openadk.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1520/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: BCM47xx: Migrate to new platform makefile style.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: BCM47xx: Really fix 128MB RAM problemHauke Mehrtens
The previous patch 4a86f2d27733f610e642649aca3e82e86fca9e22 (lmo) rsp. 84a6fcb368a080620d12fc4d79e07902dbee7335 (kernel.org) was wrong. The BCM47xx architecture maps the ram into a 128MB address space. It will be spaced there as often as goes into the 128MB. Detection tries to find the position where the same memory is found. When reading beyond 128MB the processor will throw an exception. If 128MB RAM is installed, it will not find a memory alias because it tries to read beyond the 128MB border. Now it just assumes 128MB installed ram if it can not find an alias. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1508/ Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-21 22:27:12 +0000