aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/netlogic
AgeCommit message (Collapse)Author
2013-02-21Merge branch 'mips-next-3.9' of ↵Ralf Baechle
git://git.linux-mips.org/pub/scm/john/linux-john into mips-for-linux-next
2013-02-17MIPS: Netlogic: Fix for quad-XLP bootJayachandran C
On multi-chip boards, the first core on slave SoCs may take much more time to wakeup. Add code to wait for the core to come up before proceeding with the rest of the boot up. Update xlp_wakeup_core to also skip the boot node and the boot CPU initialization which is already complete. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4783/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: Netlogic: use preset loops per jiffyJayachandran C
Doing calibrate delay on a hardware thread will be inaccurate since it depends on the load on other threads in the core. It will also slow down the boot process when done for 128 hardware threads. Switch to a pre-computed loops per jiffy based on the core frequency. The value is computed based on the core frequency and roughly matches the value calculated by calibrate_delay(). Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4791/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: Netlogic: Use PIC timer as a clocksourceJayachandran C
The XLR/XLS/XLP PIC has a 8 countdown timers which run at the PIC frequencey. One of these can be used as a clocksource to provide timestamps that is common across cores. This can be used in place of the count/compare clocksource which is per-CPU. On XLR/XLS PIC registers are 32-bit, so we just use the lower 32-bits of the PIC counter. On XLP, the whole 64-bit can be used. Provide common macros and functions for PIC timer registers on XLR/XLS and XLP, and use them to register a PIC clocksource. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4786/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: Netlogic: Split XLP L1 i-cache among threadsJayachandran C
Since we now use r4k cache code for Netlogic XLP, it is better to split L1 icache among the active threads, so that threads won't step on each other while flushing icache. The L1 dcache is already split among the threads in the core. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4787/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: Netlogic: Optimize EIMR/EIRR accesses in 32-bitJayachandran C
Provide functions ack_c0_eirr(), set_c0_eimr(), clear_c0_eimr() and read_c0_eirr_and_eimr() that do the EIMR and EIRR operations and update the interrupt handling code to use these functions. Also, use the EIMR register functions to mask interrupts in the irq code. The 64-bit interrupt request and mask registers (EIRR and EIMR) are accessed when the interrupts are off, and the common operations are to set or clear a bit in these registers. Using the 64-bit c0 access functions for these operations is not optimal in 32-bit, because it will disable/restore interrupts and split/join the 64-bit value during each register access. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4790/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: Netlogic: add XLS6xx to FMN configJayachandran C
Add support for XLS6xx CPUs to the Fast Message Network (FMN) configuration. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4785/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-01MIPS: Whitespace cleanup.Ralf Baechle
Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-01-30MIPS: Netlogic: Fix UP compilation on XLRJayachandran C
The commit 2a37b1a "MIPS: Netlogic: Move from u32 cpumask to cpumask_t" breaks uniprocessor compilation on XLR with: arch/mips/netlogic/xlr/setup.c: In function 'prom_init': arch/mips/netlogic/xlr/setup.c:196:6: error: unused variable 'i' Fix by defining 'i' only when CONFIG_SMP is defined. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4760/ Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-14Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "The MIPS bits for 3.8. This also includes a bunch fixes that were sitting in the linux-mips.org git tree for a long time. This pull request contains updates to several OCTEON drivers and the board support code for BCM47XX, BCM63XX, XLP, XLR, XLS, lantiq, Loongson1B, updates to the SSB bus support, MIPS kexec code and adds support for kdump. When pulling this, there are two expected merge conflicts in include/linux/bcma/bcma_driver_chipcommon.h which are trivial to resolve, just remove the conflict markers and keep both alternatives." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (90 commits) MIPS: PMC-Sierra Yosemite: Remove support. VIDEO: Newport Fix console crashes MIPS: wrppmc: Fix build of PCI code. MIPS: IP22/IP28: Fix build of EISA code. MIPS: RB532: Fix build of prom code. MIPS: PowerTV: Fix build. MIPS: IP27: Correct fucked grammar in ops-bridge.c MIPS: Highmem: Fix build error if CONFIG_DEBUG_HIGHMEM is disabled MIPS: Fix potencial corruption MIPS: Fix for warning from FPU emulation code MIPS: Handle COP3 Unusable exception as COP1X for FP emulation MIPS: Fix poweroff failure when HOTPLUG_CPU configured. MIPS: MT: Fix build with CONFIG_UIDGID_STRICT_TYPE_CHECKS=y MIPS: Remove unused smvp.h MIPS/EDAC: Improve OCTEON EDAC support. MIPS: OCTEON: Add definitions for OCTEON memory contoller registers. MIPS: OCTEON: Add OCTEON family definitions to octeon-model.h ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian. MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree. MIPS: Remove usage of CEVT_R4K_LIB config option. ...
2012-12-11Merge tag 'usb-3.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg Kroah-Hartman: "Here's the big set of USB patches for 3.8-rc1. Lots of USB host driver cleanups in here, and a bit of a reorg of the EHCI driver to make it easier for the different EHCI platform drivers to all work together nicer, which was a reduction in overall code. We also deleted some unused firmware files, and got rid of the very old file_storage usb gadget driver that had been broken for a long time. This means we ended up removing way more code than added, always a nice thing to see: 310 files changed, 3028 insertions(+), 10754 deletions(-) Other than that, the usual set of new device ids, driver fixes, gadget driver and controller updates and the like. All of these have been in the linux-next tree for a number of weeks. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (228 commits) USB: mark uas driver as BROKEN xhci: Add Lynx Point LP to list of Intel switchable hosts uwb: fix uwb_dev_unlock() missed at an error path in uwb_rc_cmd_async() USB: ftdi_sio: Add support for Newport AGILIS motor drivers MAINTAINERS: remove drivers/block/ub.c USB: chipidea: fix use after free bug ezusb: add dependency to USB usb: ftdi_sio: fixup BeagleBone A5+ quirk USB: cp210x: add Virtenio Preon32 device id usb: storage: remove redundant memset() in usb_probe_stor1() USB: option: blacklist network interface on Huawei E173 USB: OHCI: workaround for hardware bug: retired TDs not added to the Done Queue USB: add new zte 3g-dongle's pid to option.c USB: opticon: switch to generic read implementation USB: opticon: refactor reab-urb processing USB: opticon: use usb-serial bulk-in urb USB: opticon: increase bulk-in size USB: opticon: use port as urb context USB: opticon: pass port to get_serial_info USB: opticon: make private data port specific ...
2012-11-30kbuild: centralize .dts->.dtb ruleStephen Warren
All architectures that use cmd_dtc do so in almost the same way. Create a central build rule to avoid duplication. The one difference is that most current uses of dtc build $(obj)/%.dtb from $(src)/dts/%.dts rather than building the .dtb in the same directory as the .dts file. This difference will be eliminated arch-by-arch in future patches. MIPS is the exception here; it already uses the exact same rule as the new common rule, so the duplicate is removed in this patch to avoid any conflict. arch/mips changes courtesy of Ralf Baechle. Update Documentation/kbuild to remove the explicit call to cmd_dtc from the example, now that the rule exists in a centralized location. Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Olof Johansson <olof@lixom.net> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: linux@lists.openrisc.net Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: linux-c6x-dev@linux-c6x.org Cc: Mark Salter <msalter@redhat.com> Cc: Michal Simek <monstr@monstr.eu> Cc: microblaze-uclinux@itee.uq.edu.au Cc: Chris Zankel <chris@zankel.net> Cc: linux-xtensa@linux-xtensa.org Cc: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-11-09MIPS: Netlogic: Support for XLR/XLS Fast Message NetworkGanesan Ramalingam
On XLR/XLS, the cpu cores communicate with fast on-chip devices (e.g. network accelerator, security engine etc.) using the Fast Messaging Network(FMN). The FMN queues and credits needs to be configured and intialized before it can be used. The co-processor 2 on XLR/XLS CPU cores has registers for FMN access, and the XLR/XLS has custom instructions for sending and loading messages. The FMN can deliver also per-cpu interrupts when messages are available at the CPU. This patch adds FMN initialization, adds interrupt setup and handling, and also provides support for sending and receiving FMN messages. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4468 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Netlogic: PIC IRQ handling update for multi-chipJayachandran C
Create struct nlm_pic_irq for interrupts handled by the PIC. This simplifies IRQ handling for multi-SoC as well as the single SoC cases. Also split the setup of percpu and PIC interrupts so that we can configure the PIC interrupts for every node. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4467 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Netlogic: Make number of nodes configurableJayachandran C
There can be 1, 2 or 4 SoCs(nodes) in a multi-chip XLP board. Add an option for multi-chip boards in case of XLP, and make the number of nodes configurable. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4470 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Netlogic: Support for multi-chip configurationJayachandran C
Upto 4 Netlogic XLP SoCs can be connected over ICI links to form a coherent multi-node system. Each SoC has its own set of on-chip devices including PIC. To support this, add a per SoC stucture and use it for the PIC and SYS block addresses instead of using global variables. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4469 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Netlogic: Move from u32 cpumask to cpumask_tJayachandran C
Initial code to support more than 32 cpus. The platform CPU mask is updated from 32-bit mask to cpumask_t. Convert places that use cpu_/cpus_ functions to use cpumask_* functions. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4464 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Netlogic: Pass cpuid to early_init_secondaryJayachandran C
The cpuid was not passed into early_init_secondary even though the comment indicated that it will be. Fix this. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4458 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Netlogic: Move fdt init to plat_mem_setupJayachandran C
At this point early printk is available, so debugging device tree issues is easier. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4460 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Netlogic: Enable SUE bit in coresJayachandran C
Enable Speculative Unmap Enable bit, which will enable speculative L2 cache requests for unmapped memory. This should give better performance for kernel code/data which is in KSEG0 Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4461 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-10-22MIPS: Netlogic: convert to use OHCI platform driverFlorian Fainelli
The OHCI platform driver is suitable for use by the Netlogic XLR platform so use this driver instead of the OHCI XLS platform driver. Signed-off-by: Florian Fainelli <florian@openwrt.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22MIPS: Netlogic: use ehci-platform driverFlorian Fainelli
The EHCI platform driver is suitable for use by the Netlogic XLR platform since there is nothing specific that the EHCI XLR platform driver does. Signed-off-by: Florian Fainelli <florian@openwrt.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-22MIPS: Netlogic: Add support for built in DTBJayachandran C
Provide a config option to embed a device tree for XLP evaluation boards. This DTB will be used if the firmware does not pass in a device tree pointer. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Patchwork: http://patchwork.linux-mips.org/patch/4103/ Signed-off-by: John Crispin <blogic@openwrt.org>
2012-08-22MIPS: Netlogic: Move serial ports to device treeJayachandran C
Add the serial ports to the device tree and remove the platform code for adding them. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Patchwork: http://patchwork.linux-mips.org/patch/4098/ Signed-off-by: John Crispin <blogic@openwrt.org>
2012-08-22MIPS: Netlogic: DTS file for XLP boardsGanesan Ramalingam
Add a basic DTS file netlogic/dts/nlm_xlp.dts which contains memory, i2c devices, NOR flash and command line arguments. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Patchwork: http://patchwork.linux-mips.org/patch/4100/ Signed-off-by: John Crispin <blogic@openwrt.org>
2012-08-22MIPS: Netlogic: merge of.c into setup.cJayachandran C
Move the function device_tree_init() from netlogic/xlp/of.c to setup.c, and remove the wrapper functions reserve_mem_mach() and free_mem_mach(). Remove file netlogic/xlp/of.c, and the Makefile entry for it. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Patchwork: http://patchwork.linux-mips.org/patch/4097/ Signed-off-by: John Crispin <blogic@openwrt.org>
2012-07-25Merge branches 'next/generic', 'next/alchemy', 'next/bcm63xx', ↵Ralf Baechle
'next/cavium', 'next/jz4740', 'next/lantiq', 'next/loongson1b' and 'next/netlogic' into mips-for-linux-next
2012-07-24MIPS: Netlogic: early console fixJayachandran C
In prom_putchar(), wait for just the TX empty bit to clear in the UART LSR. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Cc: Florian Fainelli <florian@openwrt.org> Patchwork: https://patchwork.linux-mips.org/patch/4112/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Fix indentation of smpboot.SJayachandran C
[ralf@linux-mips.org: I've folded most segments of this patch into those patches in -next that originally were causing the whitespace damage. This is just what's left over] Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4094/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Add XLP SoC devices in FDTGanesan Ramalingam
Probe and add devices on SoC "simple-bus" on startup. This will in turn add devices like I2C controller that are specified in the device tree under 'soc'. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3762/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Add IRQ mappings for more devicesJayachandran C
Add IRT to IRQ translation for the MMC and I2C IRQs. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3761/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: USB support for XLPGanesan Ramalingam
The XLP USB controller appears as a device on the internal SoC PCIe bus, the block has 2 EHCI blocks and 4 OHCI blocks. Change are to: * Add files netlogic/xlp/usb-init.c and asm/netlogic/xlp-hal/usb.h to initialize the USB controller and define PCI fixups. The PCI fixups are to setup interrupts and DMA mask. * Update include/asm/xlp-hal/{iomap.h,pic.h,xlp.h} to add interrupt mapping for EHCI/OHCI interrupts. Signed-off-by: Ganesan Ramalingam <ganesanr@netlogicmicro.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3756/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: XLP PCIe controller support.Ganesan Ramalingam
Adds support for the XLP on-chip PCIe controller. On XLP, the on-chip devices(including the 4 PCIe links) appear in the PCIe configuration space of the XLP as PCI devices. The changes are to initialize and register the PCIe controller, enable hardware byte swap in the PCIe IO and MEM space, and to enable PCIe interrupts. Signed-off-by: Ganesan Ramalingam <ganesanr@netlogicmicro.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3760/ Patchwork: https://patchwork.linux-mips.org/patch/4104/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Platform changes for XLR/XLS I2CJayachandran C
Add platform code for XLR/XLS I2C controller and devices. Add devices on the I2C bus on the XLR/XLS developement boards. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3757/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Platform NAND/NOR flash supportGanesan Ramalingam
Changes to add support for the boot NOR flash on XLR boards and the boot NAND/NOR flash drivers on the XLS boards. Signed-off-by: Ganesan Ramalingam <ganesanr@netlogicmicro.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3758/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Platform changes for XLS USBJayachandran C
Add USB initialization code, setup resources and add USB platform driver in mips/netlogic/xlr/platform.c. Add USB support for XLR/XLS platform in Kconfig. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3759/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Remove NETLOGIC_ prefixJayachandran C
Remove NETLOGIC_ prefix from gpio register definitions, this will bring it in-line with the other Netlogic headers. Having NETLOGIC prefix here is misleading because these are XLR/XLS specific register definitions. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3754/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: SMP wakeup code updateJayachandran C
Update for core intialization code. Initialize status register after receiving NMI for CPU wakeup. Add the low level L1D flush code before enabling threads in core. Also convert the ehb to _ehb so that it works under more GCC versions. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3755/ Patchwork: https://patchwork.linux-mips.org/patch/4095/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Update comments in smpboot.SJayachandran C
No change in logic, comments update and whitespace cleanup. * A few comments in the file were in assembler style and the rest int C style, convert all of them to C style. * Mark workarounds for Ax silicon with a macro XLP_AX_WORKAROUND * Whitespace fixes - use tabs consistently * rename __config_lsu macro to xlp_config_lsu Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3749/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Prune some target specific code out of prom.cDavid Daney
This code is not common enough to be in a shared file. It is also not used by any existing boards, so just remove it. [ralf@linux-mips.org: Dropped removal of irq_create_of_mapping which was already removed by abd2363f6a5f1030b935e0bdc15cf917313b3b10 [irq_domain/mips: Allow irq_domain on MIPS]. Moved device_tree_init() and dependencies to its sole user, the XLP code.] Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org Cc: grant.likely@secretlab.ca Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2946/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-03MIPS: Netlogic: Fix TLB size of boot CPU.Jayachandran C
Starting other threads in the core will change the number of TLB entries of a CPU. Re-calculate current_cpu_data.tlbsize on the boot cpu after enabling and waking up other threads. The secondary CPUs do not need this logic because the threads are enabled on the secondary cores at wakeup and before cpu_probe. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3751/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-03-29remove references to cpu_*_map in arch/Rusty Russell
This has been obsolescent for a while; time for the final push. In adjacent context, replaced old cpus_* with cpumask_*. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: David S. Miller <davem@davemloft.net> (arch/sparc) Acked-by: Chris Metcalf <cmetcalf@tilera.com> (arch/tile) Cc: user-mode-linux-devel@lists.sourceforge.net Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Cc: Richard Kuo <rkuo@codeaurora.org> Cc: linux-hexagon@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Helge Deller <deller@gmx.de> Cc: sparclinux@vger.kernel.org
2012-03-28Disintegrate asm/system.h for MIPSDavid Howells
Disintegrate asm/system.h for MIPS. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> cc: linux-mips@linux-mips.org
2011-12-07MIPS: Netlogic: Mark Netlogic chips as SMT capableHillf Danton
Netlogic XLR chip has multiple cores. Each core includes four integrated hardware threads, and they share L1 data and instruction caches. If the chip is marked to be SMT capable, scheduler then could do more, say, idle load balancing. Changes are now confined only to the code of XLR, and hardware is probed to get core ID for correct setup. [jayachandranc: simplified and adapted for new merged XLR/XLP code] Signed-off-by: Hillf Danton <dhillf@gmail.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2972/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Netlogic: Add support for XLP 3XX coresJayachandran C
Add new processor ID to asm/cpu.h and kernel/cpu-probe.c. Update to new CPU frequency detection code which works on XLP 3XX and 8XX. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2971/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Netlogic: Merge some of XLR/XLP wakup codeJayachandran C
Create a common NMI and reset handler in smpboot.S and use this for both XLR and XLP. In the earlier code, the woken up CPUs would busy wait until released, switch this to wakeup by NMI. The initial wakeup code or XLR and XLP are differ since they are started from different bootloaders (XLP from u-boot and XLR from netlogic bootloader). But in both platforms the woken up CPUs wait and are released by sending an NMI. Add support for starting XLR and XLP in 1/2/4 threads per core. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2970/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Netlogic: Add XLP makefiles and configJayachandran C
- Add CPU_XLP and NLM_XLR_BOARD to arch/mips/Kconfig for Netlogic XLP boards - Update mips Makefiles to add XLP Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2968/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Netlogic: Add XLP platform files for XLP SoCJayachandran C
- Update common files to support XLP. - Add arch/mips/include/asm/netlogic/xlp-hal for register definitions and access macros - Add arch/mips/netlogic/xlp/ for XLP specific files. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2967/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Netlogic: Move code common with XLP to common/Jayachandran C
- Move code that can be shared with XLP (irq.c, smp.c, time.c and xlr_console.c) to arch/mips/netlogic/common - Add asm/netlogic/haldefs.h and asm/netlogic/common.h for common and io functions shared with XLP - remove type 'nlm_reg_t *' and use uint64_t for mmio offsets - Move XLR specific code in smp.c to xlr/wakeup.c - Move XLR specific PCI code from irq.c to mips/pci/pci-xlr.c - Provide API for pic functions called from common/irq.c Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2964/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Netlogic: No need to set -Werror in mips/xlrJayachandran C
The -Werror compilation flag is already set for arch/mips - it can be removed from arch/mips/xlr/Makefile Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2963/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-17 14:47:12 +0000