aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/txx9
AgeCommit message (Collapse)Author
2009-06-17MIPS: TXx9: Add ACLC supportAtsushi Nemoto
Add platform support for ACLC of TXx9 SoCs. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: TXx9: Add DMAC supportAtsushi Nemoto
Add platform support for DMAC of TXx9 SoCs. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-14MIPS: TXx9: Fix possible overflow in clock calculationsAtsushi Nemoto
Addition of -fwrapv option in 2.6.29 discloses possible overflow with signed arithmetics. For example, result of "a * 6 / 12" (int a = 400000000) is 200000000 without -fwrapv but -157913941 with -fwrapv. Change some variable to unsigned to avoid such overflows. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-14MIPS: RBTX4939: Fix typo in system nameAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-04-06Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (53 commits) [MTD] struct device - replace bus_id with dev_name(), dev_set_name() [MTD] [NOR] Fixup for Numonyx M29W128 chips [MTD] mtdpart: Make ecc_stats more realistic. powerpc/85xx: TQM8548: Update DTS file for multi-chip support powerpc: NAND: FSL UPM: document new bindings [MTD] [NAND] FSL-UPM: Add wait flags to support board/chip specific delays [MTD] [NAND] FSL-UPM: add multi chip support [MTD] [NOR] Add device parent info to physmap_of [MTD] [NAND] Add support for NAND on the Socrates board [MTD] [NAND] Add support for 4KiB pages. [MTD] sysfs support should not depend on CONFIG_PROC_FS [MTD] [NAND] Add parent info for CAFÉ controller [MTD] support driver model updates [MTD] driver model updates (part 2) [MTD] driver model updates [MTD] [NAND] move gen_nand's probe function to .devinit.text [MTD] [MAPS] move sa1100 flash's probe function to .devinit.text [MTD] fix use after free in register_mtd_blktrans [MTD] [MAPS] Drop now unused sharpsl-flash map [MTD] ofpart: Check name property to determine partition nodes. ... Manually fix trivial conflict in drivers/mtd/maps/Makefile
2009-03-30MIPS: Enable GENERIC_HARDIRQS_NO__DO_IRQ for all platformsRalf Baechle
__do_IRQ() is deprecated and will go away. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-03-20[MTD] RBTX4939: add MTD supportAtsushi Nemoto
Add platform support for NOR flash chips on RBTX4939 board. This board has complex flash mappings, controlled by its DIPSW setting. [akpm@linux-foundation.org: Use min_t] Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Ralf Bächle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-20[MTD] [NAND] TXx9: add NDFMC supportAtsushi Nemoto
Add platform support for NAND Flash Memory Controller of TXx9 SoCs. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-By: Ralf Bächle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-30MIPS: TXx9: Add support for TX4939 internal RTCAtsushi Nemoto
Add platform support to use rtc-tx4939 driver. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30MIPS: RBTX4927: Add GPIO-LED supportAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30MIPS: TXx9: Fix RBTX4939 ethernet address initializationAtsushi Nemoto
Fix location of ethernet adddress when booted from external ROM. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: TXx9: Make firmware parameter passing more robustGeert Uytterhoeven
When booting Linux on a txx9 board with VxWorks boot loader, it crashes in prom_getenv(), as VxWorks doesn't pass firmware parameters in a0-a3 (in my case, the actual leftover values in these registers were 0x80002000, 0x80001fe0, 0x2000, and 0x20). Make the parsing of argc, argv, and envp a bit more robust by checking if argc is a number below CKSEG0, and argv/envp point to CKSEG0. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: TXx9: CONFIG_TOSHIBA_RBTX4939 spellingGeert Uytterhoeven
Fix a typo in the comment for the TOSHIBA_RBTX4939 config option Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: RBTX4939: Add smc91x supportAtsushi Nemoto
Add smc91x platform device to RBTX4939 board and some hacks for big endian. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: TXx9: 7 segment LED supportAtsushi Nemoto
Add sysfs interface for 7 segment LED and implement access routine for RBTX4939. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-23TXx9: Add TX4938 ATA support (v3)Atsushi Nemoto
Add a helper routine to register tx4938ide driver and use it on RBTX4938 board. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-11MIPS: TXx9: Add TX4939 ATA support (v2)Atsushi Nemoto
Add a helper routine to register tx4939ide driver and use it on RBTX4939 board. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Implement prom_free_prom_memoryAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add RBTX4939 board supportAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/txx9/rbtx4939/Makefile create mode 100644 arch/mips/txx9/rbtx4939/irq.c create mode 100644 arch/mips/txx9/rbtx4939/prom.c create mode 100644 arch/mips/txx9/rbtx4939/setup.c create mode 100644 include/asm-mips/txx9/rbtx4939.h
2008-10-11MIPS: TXx9: Add TX4939 SoC supportAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/pci/pci-tx4939.c create mode 100644 arch/mips/txx9/generic/irq_tx4939.c create mode 100644 arch/mips/txx9/generic/setup_tx4939.c create mode 100644 include/asm-mips/txx9/tx4939.h
2008-10-11MIPS: TXx9: IOC LED supportAtsushi Nemoto
Add leds-gpio platform device for controlling LEDs connected to IOC on RBTX49XX and JMR3927 board. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Microoptimize interrupt handlersAtsushi Nemoto
The IOC interrupt status register on RBTX49XX only have 8 bits. Use 8-bit version of __fls() to optimize interrupt handlers. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: stop_unused_modulesAtsushi Nemoto
TXx9 SoCs have pin multiplex. Stop some controller modules which can not be used due to pin configurations. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add board_be_init for TX4927/TX4938Atsushi Nemoto
Setup default board_be_handler for TX4927/TX4938. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Default machine_restart using watchdog resetAtsushi Nemoto
Add default machine_restart routine using watchdog reset of TX4927 and TX4938. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Make spi_eeprom.c more genericAtsushi Nemoto
Helper routines in txx9/rbtx4938/spi_eeprom.c is not TX4938 specific. Move it to txx9/generic/ directory and make it works with SPI bus number other than 0. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/txx9/generic/spi_eeprom.c delete mode 100644 arch/mips/txx9/rbtx4938/spi_eeprom.c
2008-10-11MIPS: RBTX4938: Add TOSHIBA_RBTX4938_MPLEX_KEEPAtsushi Nemoto
Add TOSHIBA_RBTX4938_MPLEX_KEEP to keep MPLEX settings by firmware. Also replace some printk with pr_info. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Raise priority of interrupts for errors, timers, SIOAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add mtd supportAtsushi Nemoto
Add helper routines to register physmap-flash platform devices for NOR flashes. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Runtime configuration of timeout-errorAtsushi Nemoto
Add kernel options to control bus timeout error. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Cache fixupAtsushi Nemoto
TX39/TX49 can enable/disable I/D cache at runtime. Add kernel options to control them. This is useful to debug some cache-related issues, such as aliasing or I/D coherency. Also enable CWF bit for TX49 SoCs. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Early command-line preprocessingAtsushi Nemoto
* Select board by command-line option or firmware environment variable. * Handle "masterclk=" option. * Add boards.h to centerize board_vec declaration. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 include/asm-mips/txx9/boards.h
2008-10-11MIPS: TXx9: Add prom_getenvAtsushi Nemoto
Add prom_getenv() which can be used for YAMON. This assumes other firmware should pass NULL for fw_arg2. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Improve handling of built-in and command-line argsAtsushi Nemoto
* Make prom_init_cmdline() static and be called from prom_init. * Append built-in args if the first character was '+'. * Drop command-line args if the first character of built-in was '-'. * Enclose args include spaces by quotes. * TX4938_NAND_BOOT is no longer needed. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RBTX4927: More explicit initializationAtsushi Nemoto
* Make sure all interrupts cleared on startup * Initialize some GPIOs Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-05[MIPS] TXx9: Fix txx9_pcode initializationAtsushi Nemoto
The txx9_pcode variable was introduced in commit fe1c2bc64f65003b39f331a8e4b0d15b235a4afd ("TXx9: Add 64-bit support") but was not initialized properly. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-08-26[MIPS] TXx9: Fix mips_hpt_frequency initializationAtsushi Nemoto
The mips_hpt_frequency initialization code was lost in commit 94a4c32939dede9328c6e4face335eb8441fc18d (linux-mips.org) / 94a4c32939dede9328c6e4face335eb8441fc18d (kernel.org) "TXx9: Add 64-bit support". Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30[MIPS] kgdb: Remove existing implementationJason Wessel
This patch explicitly removes the kgdb implementation, for mips which is intended to be followed by a patch that adds a kgdb implementation for MIPS that makes use of the kgdb core in the kernel. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30[MIPS] TXx9: Kconfig cleanupAtsushi Nemoto
Unify some entries in txx9/Kconfig. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30[MIPS] TXx9: Support early_printkAtsushi Nemoto
Kill jmr3927-specific prom_putchar and add txx9-generic prom_putchar to support early_printk. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30[MIPS] TXx9: Unify serial_txx9 setupAtsushi Nemoto
* Unify calling of early_serial_txx9_setup. * Use dedicated serial clock on RBTX4938. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30[MIPS] TXx9: Random cleanupAtsushi Nemoto
* Random cleanups spotted by checkpatch script. * Do not initialize panic_timeout. "panic=" kernel parameter can be used. * Do not add "ip=any" or "ip=bootp". This options is not board specific. * Do not add "root=/dev/nfs". This is default on CONFIG_ROOT_NFS. * Kill unused error checking. * Fix IRQ comment to match current code. * Kill some unneeded includes * ST0_ERL is already cleared in generic code. * conswitchp is initialized generic code. * __init is not needed in prototype. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30[MIPS] TXx9: Make tx4938-specific code more independentAtsushi Nemoto
Make some TX4938 SoC specific code independent from board specific code. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30[MIPS] TXx9: Make tx3927-specific code more independentAtsushi Nemoto
Make some TX3927 SoC specific code independent from board specific code. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30[MIPS] TXx9: Cleanup watchdogAtsushi Nemoto
Unify registration of txx9wdt platform device. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30[MIPS] TXx9: Cleanup restart/halt/power_offAtsushi Nemoto
Unify machine_restart/machine_halt/pm_power_off and add fallback machine_halt routine. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30[MIPS] TXx9: PCI error handlingAtsushi Nemoto
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Date: Thu, 24 Jul 2008 00:25:16 +0900 Subject: [PATCH] txx9: PCI error handling Add more control and detailed report on PCI error interrupt. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30[MIPS] TXx9: Add some pci optionsAtsushi Nemoto
Add pci options for backplane type, clock selection, error handling, timeout values. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30[MIPS] TXx9: Fix JMR3927 irq numbersAtsushi Nemoto
* Fix wrong txx9_clockevent interrupt number * Fix TXX9_IRQ_BASE for JMR3927+FPCIB case Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-20[MIPS] TXx9: Fix some sparse warningsAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-29 10:54:26 +0000