aboutsummaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)Author
2006-09-27[PATCH] sysctl: Allow /proc/sys without sys_sysctlEric W. Biederman
Since sys_sysctl is deprecated start allow it to be compiled out. This should catch any remaining user space code that cares, and paves the way for further sysctl cleanups. [akpm@osdl.org: If sys_sysctl() is not compiled-in, emit a warning] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[MIPS] setup.c: use early_param() for early command line parsingFranck Bui-Huu
There's no point to rewrite some logic to parse command line to pass initrd parameters or to declare a user memory area. We could use instead parse_early_param() that does the same thing. Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] setup.c: remove MAXMEM macroFranck Bui-Huu
It doesn't improve readability. Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] setup.c: do not inline functionsFranck Bui-Huu
There's no point to inline any functions in setup.c. Let's GCC doing its job, it's good enough for that now. Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] setup.c: remove useless includes.Franck Bui-Huu
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] setup.c: move initrd code inside dedicated functionsFranck Bui-Huu
NUMA specific code could rely on them too. Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] setup.c: cleanup bootmem_init()Franck Bui-Huu
This function although doing simple thing is hard to follow. It's mainly due to: - a lot of #ifdef - bad local names - redundant tests So this patch try to address these issues. It also do not use max_pfn global which is marked as an unused exported symbol. As a bonus side, it's now really easy to see what part of the code is for no-numa system. There's also no point to make this function inline. Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] get_wchan(): remove uses of mfinfo[64]Franck Bui-Huu
This array was used to 'cache' some frame info about scheduler functions to speed up get_wchan(). This array was 1Ko size and was only used when CONFIG_KALLSYMS was set but declared for all configs. Rather than make the array statement conditional, this patches removes this array and its uses. Indeed the common case doesn't seem to use this array and get_wchan() is not a critical path anyways. It results in a smaller bss and a smaller/cleaner code: text data bss dec hex filename 2543808 254148 139296 2937252 2cd1a4 vmlinux-new-get-wchan 2544080 254148 143392 2941620 2ce2b4 vmlinux~old Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] get_frame_info(): null function size means size is unknownFranck Bui-Huu
This patch adds 2 sanity checks. The first one test that the start address of the function to analyze has been set by the caller. If not return an error since nothing usefull can be done without. The second one checks that the function's size has been set. A null size can happen if CONFIG_KALLSYMS is not set and it means that we don't know the size of the function to analyze. In this case, we make it equal to 128 instructions by default. Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] unwind_stack(): return ra if an exception occured at the first ↵Franck Bui-Huu
instruction Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Enable tmpfs for anything that possibly runs a full distribution.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] The o32 fstatat syscall behaves differently on 32 and 64 bit kernelsRichard Sandiford
While working on a glibc patch to support the fstatat() functions[1], I noticed that the o32 implementation behaves differently on 32-bit and 64-bit kernels; the former provides a stat64 while the latter provides a plain (o32) stat. I think the former is what's intended, as there is no separate fstatat64. It's also what x86 does. I think this is just a case of a compat too far. [1] I've seen Khem's patch, but I don't think it's right. Signed-off-by: Richard Sandiford <richard@codesourcery.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Remove EV96100 as previously announced.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Replace BARRIER with more appropriate hazard barrier.Ralf Baechle
This is the unchanged part 2 of Chris' hazard cleanup. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] IP27: Delete useless declaration of allocate_irqno().Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Add configuration variables for RM9xxx processorthomas@koeller.dyndns.org
This patch introduces a number of configuration variables. These allow to specify presence/absence of integrated peripherals found on the MIPS RM9xxx processor family, based on the particular processor model used. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Move excite_fpga.h to include/asm-mips/mach-excitethomas@koeller.dyndns.org
excite_fpga.h, like all platform headers, really belongs in the platform header directory. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Suppress compiler warningsthomas@koeller.dyndns.org
The excite platform exports hardware resources for device drivers to use. Any driver wanting to use these resources will look up them by their names. Since these resources are declared to have static linkage, but are not used in the source file defining them, the compiler used to emit an 'unused' warning, which this patch suppresses. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Move definition of IRIX compat constant into IRIX compat code.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] c-r4k: Convert init functions from inline to __init.Ralf Baechle
With more recent compilers inline doesn't necessarily means a function will always be inlined. So leave that decission to the compiler and make the function as __init. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] TLS: set_thread_area returns asmlinkage int not void.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] TLS: Delete unused sys32_set_thread_areaRalf Baechle
There is no need for a compat version. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Make PROT_WRITE imply PROT_READ.Ralf Baechle
2006-09-27[MIPS] Atlas: update interrupt handlingMaciej W. Rozycki
The following change updates the Atlas interrupt handling to match that of Malta. Tested with a 5Kc and a 34Kf successfully. Signed-off-by: Maciej W. Rozycki <macro@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Patch to arch/mips/mips-boards/generic/time.cKevin D. Kissell
In hooking up the perf counter overflow interrupt to the experimental deprecated-real-soon-now /proc/perf interface last night, I had to revisit arch/mips/mips-boards/generic/time.c, and discovered that when the 2.6.9-based SMTC prototype was merged with the more recent tree, it was missed that arch/mips/kernel/time.c had changed so that even in SMP kernels, timer_interrupt() calls local_timer_interrupt(), so there is no longer a need to invoke it directly from mips_timer_interrupt() in those cases where timer_interrupt() has been called. So I got rid of that, and added the invocation of perf_irq() if Cause.PCI is set, more-or-less following the same logic as in the non-SMTC case, with the modifications that (a) a runtime check for Release 2 isn't done, because it's redundant in SMTC), and (b) we check for a clock interrupt regardless of the value returned by the perf counter service - I don't understand why we'd want to control that with perf_irq(), but maybe one of you knows the story. I also got rid of the stupid warning about the unused variable when compiled for SMTC (another artifact of the merge). The result hasn't been beaten to death, but boots, seems stable, and supports extended precision event counting. Signed-off-by: Kevin D. Kissell <kevink@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Reduce race between cpu_wait() and need_resched() checkingAtsushi Nemoto
If a thread became runnable between need_resched() and the WAIT instruction, switching to the thread will delay until a next interrupt. Some CPUs can execute the WAIT instruction with interrupt disabled, so we can get rid of this race on them (at least UP case). Original Patch by Atsushi with fixing up for MIPS Technology's cores by Ralf based on feedback from the RTL designers. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Wire up set_robust_list(2) and get_robust_list(2)Atsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] SEAD defconfig build fixMaciej W. Rozycki
Signed-off-by: Maciej W. Rozycki <macro@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Fix for pci config_access on alchemy au1x000Alexander Bigga
I've encountered a serious problem with PCI config space access on Au1x000 platforms with recent 2.6.x-kernel. With 2.4.31 the same hardware works fine. So I was looking for the differences: Symptoms: - no PCI-device is seen on bootup though two or three cards are present - lspci output is empty - OR: lspci shows 20 times the same device (- OR: in some slot-configurations it worked anyhow) System(s): 1. platform with Au1500 and three PCI-devices (actually a mycable XXS1500 with backplane for three PCI-devices) 2. platform with Au1550 and two PCI-devices (custom board) Debugging: I digged down to the config_access() of the au1xxx-processors in arch/mips/pci/ops-au1000.c and switched on DEBUG. The code of config_access() seems to be almost the same as of the 2.4.x-kernel. But the "pci_cfg_vm->addr" returned by get_vm_area(0x2000, 0) once on booting is different. That's of course not forbidden. But the alignment seems to be wrong. In my case, I received: 2.4.31: pci_cfg_vm->addr = c0000000 2.6.18-rc5: pci_cfg_vm->addr = c0101000 To make it short: With 2.6.x it fails on the first config-access with: "PCI ERR detected: status 83a00356". Fixup: My fix is now, to use the VM_IOREMAP-flag in the get_vm_area call. This flag seems to be introduced in mm/vmalloc.c a long time ago (in 2.6.7-bk13, I found in gitweb). Now, the returned address is pci_cfg_vm->addr = c0104000 and everything works fine. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Make prepare_frametrace() not clobber v0Atsushi Nemoto
Since lmo commit 323a380bf9e1a1679a774a2b053e3c1f2aa3f179 ("Simplify dump_stack()") made prepare_frametrace() always inlined, using $2 (v0) in __asm__ is not safe anymore. We can use $1 (at) instead. Also we should use "dla" instead of "la" for 64-bit kernel. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Do not use drop_mmu_context to flusing other task's VIPT I-cache.Atsushi Nemoto
c-r4k.c and c-sb1.c use drop_mmu_context() to flush virtually tagged I-caches, but this does not work for flushing other task's icache. This is for example triggered by copy_to_user_page() called from ptrace(2). Use indexed flush for such cases. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] MT: Fix setting of XTC.Elizabeth Oldham
XTC can only be set if VPA is clear, which it may not be. There is also the possibility of a back to back c0 register access hazard to take care of. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] SMTC Build fix.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Fix 32-bit kernel by replacing 64-bit-only code.Ralf Baechle
dclz() expects its 64-bit argument being passed as a single register but on 32-bit kernels it'll actually be in a register pair. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] MT: When doing "select SMP" also select SMP's prerequesites or ...Ralf Baechle
... kconfig will do weird stuff. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] eXcite: Don't set SERIAL_RM9000.Ralf Baechle
The driver has not been merged yet so selecting it results in a warning message. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Retire flush_icache_page from mm use.Ralf Baechle
On the 34K the redundant cache operations were causing excessive stalls resulting in realtime code running on the second VPE missing its deadline. For all other platforms this patch is just a significant performance improvment as illustrated by below benchmark numbers. Processor, Processes - times in microseconds - smaller is better ------------------------------------------------------------------------------ Host OS Mhz null null open slct sig sig fork exec sh call I/O stat clos TCP inst hndl proc proc proc --------- ------------- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- 25Kf 2.6.18-rc4 533 0.49 1.16 7.57 33.4 30.5 1.34 12.4 5497 17.K 54.K 25Kf 2.6.18-rc4-p 533 0.49 1.16 6.68 23.0 30.7 1.36 8.55 5030 16.K 48.K 4Kc 2.6.18-rc4 80 4.21 15.0 131. 289. 261. 16.5 258. 18.K 70.K 227K 4Kc 2.6.18-rc4-p 80 4.34 13.1 128. 285. 262. 18.2 258. 12.K 52.K 176K 34Kc 2.6.18-rc4 40 5.01 14.0 61.6 90.0 477. 17.9 94.7 29.K 108K 342K 34Kc 2.6.18-rc4-p 40 4.98 13.9 61.2 89.7 475. 17.6 93.7 8758 44.K 158K BCM1480 2.6.18-rc4 700 0.28 0.60 3.68 5.92 16.0 0.78 5.08 931. 3163 15.K BCM1480 2.6.18-rc4-p 700 0.28 0.61 3.65 5.85 16.0 0.79 5.20 395. 1464 8385 TX49-16K 2.6.18-rc3 197 0.73 2.41 19.0 37.8 82.9 2.94 17.5 4438 14.K 56.K TX49-16K 2.6.18-rc3-p 197 0.73 2.40 19.9 36.3 82.9 2.94 23.4 2577 9103 38.K TX49-32K 2.6.18-rc3 396 0.36 1.19 6.80 11.8 41.0 1.46 8.17 2738 8465 32.K TX49-32K 2.6.18-rc3-p 396 0.36 1.19 6.82 10.2 41.0 1.46 8.18 1330 4638 18.K Original patch by me with enhancements by Atsushi Nemoto. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
2006-09-27[MIPS] Avoid double signal restarting.Ralf Baechle
In entry.S resume_userspace ... jal do_notify_resume form a loop through which the kernel will iterate as long as work is pending. If we iterate through this loop more than once with no signal pending for at least one but the last iteration we will take do the syscall restarting multiple times resulting in a syscall return prior to the the syscall instruction in userspace. This may happen when debugging a multithreaded program. Debugging and original fix by Maciej; extended to other ABIs by me. Signed-off-by: Maciej W. Rozycki <macro@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] MT: Initialise all writable bits in Cause register to zero.Chris Dearman
Recent 34Ks come out of reset with WP enabled on VPE 1 so we take an immediate exception when starting the second VPE. Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Fix EV64120 PCI fixup in MakefileYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Add missing returns in signal code.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] IRIX: Crapectopy.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Don't call try_to_freeze in do_signal & co.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Cleanup leftovers of ARCH_HAS_IRQ_PER_CPURalf Baechle
CONFIG_IRQ_PER_CPU now controls the IRQ_PER_CPU stuff. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Improve unwind_stack()Franck Bui-Huu
This patch allows unwind_stack() to return ra for leaf function. But it tries to detects cases where get_frame_info() wrongly consider nested function as a leaf one. It also pass 'unsinged long *sp' instead of 'unsigned long **sp' as second parameter. The code looks cleaner. Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Make get_frame_info() more robustFranck Bui-Huu
Now get_frame_info() wants to detect move sp instruction first. It assumes that the save ra in the stack instruction can't happen before allocating frame size space into the stack. Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Simplify dump_stack()Franck Bui-Huu
Make dump_stack() code not depend on CONFIG_KALLSYMS. It also make prepare_frametrace() always inlined to get less false entries reported by show_raw_backtrace(). Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Make frame_info_init() more readable.Franck Bui-Huu
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Miscellaneous cleanup in prologue analysis codeFranck Bui-Huu
We usually use backtrace term for dumping a call tree during debug. Therefore this patch renames show_frametrace() into show_backtrace() and show_trace() into show_raw_backtrace(). It also uses the new function print_ip_sym(). Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27[MIPS] Remove unused MODULE_RANGE macro.Franck Bui-Huu
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>