aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/Makefile
AgeCommit message (Collapse)Author
2010-08-24powerpc: Fix typo in uImage targetAnatolij Gustschin
Commit e32e78c5ee8aadef020fbaecbe6fb741ed9029fd (powerpc: fix build with make 3.82) introduced a typo in uImage target and broke building uImage: make: *** No rule to make target `uImage'. Stop. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: stable <stable@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-09powerpc: fix build with make 3.82Sam Ravnborg
Thomas Backlund reported that the powerpc build broke with make 3.82. It failed with the following message: arch/powerpc/Makefile:183: *** mixed implicit and normal rules. Stop. The fix is to avoid mixing non-wildcard and wildcard targets. Reported-by: Thomas Backlund <tmb@mandriva.org> Tested-by: Thomas Backlund <tmb@mandriva.org> Cc: Michal Marek <mmarek@suse.cz> Cc: stable <stable@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-04Merge commit 'v2.6.35' into kbuild/kbuildMichal Marek
Conflicts: arch/powerpc/Makefile
2010-08-03kbuild: allow assignment to {A,C,LD}FLAGS_MODULE on the command lineSam Ravnborg
It is now possible to assign options to AS, CC and LD on the command line - which is only used when building modules. {A,C,LD}FLAGS_MODULE was all used both in the top-level Makefile in the arch makefiles, thus users had no way to specify additional options to AS, CC, LD when building modules without overriding the original value. Introduce a new set of variables KBUILD_{A,C,LD}FLAGS_MODULE that is used by arch specific files and free up {A,C,LD}FLAGS_MODULE so they can be assigned on the command line. All arch Makefiles that used the old variables has been updated. Note: Previously we had a MODFLAGS variable for both AS and CC. But in favour of consistency this was dropped. So in some cases arch Makefile has one assignmnet replaced by two assignmnets. Note2: MODFLAGS was not documented and is dropped without any notice. I do not expect much/any breakage from this. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin] Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [avr32] Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-08powerpc: Fix module building for gcc 4.5 and 64 bitStephen Rothwell
Gcc 4.5 is now generating out of line register save and restore in the function prefix and postfix when we use -Os. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-05kbuild: move -fno-dwarf2-cfi-asm to powerpc onlyAndi Kleen
Better dwarf2 unwind information is a good thing, it allows better debugging with kgdb and crash and helps systemtap. Commit 003086497f07f7f1e67c0c295e261740f822b377 ("Build with -fno-dwarf2-cfi-asm") disabled some CFI information globally to work around a module loader bug on powerpc. But this disables the better unwind tables for all architectures, not just powerpc. Move the workaround to powerpc and also add a suitable comment that's it really a workaround. This improves dwarf2 unwind tables on x86 at least. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-09-24powerpc: Check for unsupported relocs when using CONFIG_RELOCATABLETony Breeds
When using CONFIG_RELOCATABLE, we build the kernel as a position independent executable. The kernel then uses a little bit of relocation code to relocate itself. That code only deals with R_PPC64_RELATIVE relocations though. If for some reason you use assembly constructs such as LOAD_REG_IMMEDIATE() to load the address of a symbol, you'll generate different kinds of relocations that won't be processed properly and bad things will happen. (We have 2 such bugs today). The perl script tries to filter out "known" bad ones. It's possible that we are missing some in the case of a weak function that nobody implements, we'll see if we get false positive and fix it. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-09-20arm, cris, mips, sparc, powerpc, um, xtensa: fix build with bash 4.0Sam Ravnborg
Albin Tonnerre <albin.tonnerre@free-electrons.com> reported: Bash 4 filters out variables which contain a dot in them. This happends to be the case of CPPFLAGS_vmlinux.lds. This is rather unfortunate, as it now causes build failures when using SHELL=/bin/bash to compile, or when bash happens to be used by make (eg when it's /bin/sh) Remove the common definition of CPPFLAGS_vmlinux.lds by pushing relevant stuff to either Makefile.build or the arch specific kernel/Makefile where we build the linker script. This is also nice cleanup as we move the information out where it is used. Notes for the different architectures touched: arm - we use an already exported symbol cris - we use a config symbol aleady available [Not build tested] mips - the jiffies complexity has moved to vmlinux.lds.S where we need it. Added a few variables to CPPFLAGS - they are only used by the linker script. [Not build tested] powerpc - removed assignment that is not needed [not build tested] sparc - simplified it using $(BITS) um - introduced a few new exported variables to deal with this xtensa - added options to CPP invocation [not build tested] Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20kbuild: use INSTALLKERNEL to select customized installkernel scriptSam Ravnborg
Replace the use of CROSS_COMPILE to select a customized installkernel script with the possibility to set INSTALLKERNEL to select a custom installkernel script when running make: make INSTALLKERNEL=arm-installkernel install With this patch we are now more consistent across different architectures - they did not all support use of CROSS_COMPILE. The use of CROSS_COMPILE was a hack as this really belongs to gcc/binutils and the installkernel script does not change just because we change toolchain. The use of CROSS_COMPILE caused troubles with an upcoming patch that saves CROSS_COMPILE when a kernel is built - it would no longer be installable. [Thanks to Peter Z. for this hint] This patch undos what Ian did in commit: 0f8e2d62fa04441cd12c08ce521e84e5bd3f8a46 ("use ${CROSS_COMPILE}installkernel in arch/*/boot/install.sh") The patch has been lightly tested on x86 only - but all changes looks obvious. Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin] Acked-by: Russell King <linux@arm.linux.org.uk> [arm] Acked-by: Paul Mundt <lethal@linux-sh.org> [sh] Acked-by: "H. Peter Anvin" <hpa@zytor.com> [x86] Cc: Ian Campbell <icampbell@arcom.com> Cc: Tony Luck <tony.luck@intel.com> [ia64] Cc: Fenghua Yu <fenghua.yu@intel.com> [ia64] Cc: Hirokazu Takata <takata@linux-m32r.org> [m32r] Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Cc: Kyle McMartin <kyle@mcmartin.ca> [parisc] Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> [powerpc] Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390] Cc: Thomas Gleixner <tglx@linutronix.de> [x86] Cc: Ingo Molnar <mingo@redhat.com> [x86] Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-08-20powerpc: Makefile simplification through use of cc-ifversionFrans Pop
Signed-off-by: Frans Pop <elendil@planet.nl> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-09powerpc: Move VMX and VSX asm code to vector.SBenjamin Herrenschmidt
Currently, load_up_altivec and give_up_altivec are duplicated in 32-bit and 64-bit. This creates a common implementation that is moved away from head_32.S, head_64.S and misc_64.S and into vector.S, using the same macros we already use for our common implementation of load_up_fpu. I also moved the VSX code over to vector.S though in that case I didn't make it build on 32-bit (yet). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11powerpc/math-emu: Fix efp dependenceLiu Yu
There is no dependece between efp and math-emu. But when disable math-emu the efp code cannot be built. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03powerpc: Remove unncessary SPE related compiler flagKumar Gala
After testing of various compiler flag combinations by Nate Case it was determined that -mabi=no-spe has no impact on the compiler generating SPE instructions. Only -mno-spe and -mspe=no do. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-20ftrace: rename FTRACE to FUNCTION_TRACERSteven Rostedt
Due to confusion between the ftrace infrastructure and the gcc profiling tracer "ftrace", this patch renames the config options from FTRACE to FUNCTION_TRACER. The other two names that are offspring from FTRACE DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same. This patch was generated mostly by script, and partially by hand. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-15powerpc: Enforce a non-spe kernel build even on broken compilersThiemo Seufer
Those two are required on my fresh gcc 4.3.1. Signed-off-by: Thiemo Seufer <ths@linutronix.de> Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15powerpc: Make the 64-bit kernel as a position-independent executablePaul Mackerras
This implements CONFIG_RELOCATABLE for 64-bit by making the kernel as a position-independent executable (PIE) when it is set. This involves processing the dynamic relocations in the image in the early stages of booting, even if the kernel is being run at the address it is linked at, since the linker does not necessarily fill in words in the image for which there are dynamic relocations. (In fact the linker does fill in such words for 64-bit executables, though not for 32-bit executables, so in principle we could avoid calling relocate() entirely when we're running a 64-bit kernel at the linked address.) The dynamic relocations are processed by a new function relocate(addr), where the addr parameter is the virtual address where the image will be run. In fact we call it twice; once before calling prom_init, and again when starting the main kernel. This means that reloc_offset() returns 0 in prom_init (since it has been relocated to the address it is running at), which necessitated a few adjustments. This also changes __va and __pa to use an equivalent definition that is simpler. With the relocatable kernel, PAGE_OFFSET and MEMORY_START are constants (for 64-bit) whereas PHYSICAL_START is a variable (and KERNELBASE ideally should be too, but isn't yet). With this, relocatable kernels still copy themselves down to physical address 0 and run there. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-03powerpc: Work around gcc's -fno-omit-frame-pointer bugTony Breeds
This bug is causing random crashes (http://bugzilla.kernel.org/show_bug.cgi?id=11414). -fno-omit-frame-pointer is only needed on powerpc when -pg is also supplied, and there is a gcc bug that causes incorrect code generation on 32-bit powerpc when -fno-omit-frame-pointer is used---it uses stack locations below the stack pointer, which is not allowed by the ABI because those locations can and sometimes do get corrupted by an interrupt. This ensures that CONFIG_FRAME_POINTER is only selected by ftrace. When CONFIG_FTRACE is enabled we also pass -mno-sched-epilog to work around the gcc codegen bug. Patch based on work by: Andreas Schwab <schwab@suse.de> Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-04powerpc/bootwrapper: Add documentation of boot wrapper targetsGrant Likely
There have been many questions on and off the mailing list about how exactly the bootwrapper is used for embedded targets. Add some documentation and help text to try and clarify the system. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-06-30powerpc: Get rid of CROSS32{AS,LD,OBJCOPY}Segher Boessenkool
CROSS32AS and CROSS32LD are never used (instead, CROSS32CC is used with proper command line options). CROSS32OBJCOPY isn't used anymore either, since the "wrapper" stuff was added. Remove these unused variables. Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-16[POWERPC] Fix -Os kernel builds with newer gcc versionsKumar Gala
GCC 4.4.x looks to be adding support for generating out-of-line register saves/restores based on: http://gcc.gnu.org/ml/gcc-patches/2008-04/msg01678.html This breaks the kernel if we enable CONFIG_CC_OPTIMIZE_FOR_SIZE. To fix this we add the use the save/restore code from gcc and simplified it down for our needs (integer only). Additionally, we have to link this code into each module. The other solution was to add EXPORT_SYMBOL() which meant going through the trampoline which seemed nonsensical for these out-of-line routines. Finally, we add some checks to prom_init_check.sh to ignore the out-of-line save/restore functions. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-11[POWERPC] bootwrapper: add simpleImage* to list of boot targetsGrant Likely
Without simpleImage% in the BOOT_TARGETS list, it is impossible to build any of the simpleImages. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-27KVM: ppc: PowerPC 440 KVM implementationHollis Blanchard
This functionality is definitely experimental, but is capable of running unmodified PowerPC 440 Linux kernels as guests on a PowerPC 440 host. (Only tested with 440EP "Bamboo" guests so far, but with appropriate userspace support other SoC/board combinations should work.) See Documentation/powerpc/kvm_440.txt for technical details. [stephen: build fix] Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-17[POWERPC] Provide access to arch/powerpc include path on ppc64Kumar Gala
There does not appear to be any reason that we shouldn't just have -Iarch/$(ARCH) on both ppc32 and ppc64 builds. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-02[POWERPC] add target for building .dtb filesGrant Likely
Call dtc from the Makefile instead of the wrapper script so that the dt blobs can be generated with a simple make invocation. Using this patch allows board ports to trigger automatic building of .dtb files by adding them to the image-y target list. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-13[POWERPC] Fix zImage-dtb.initrd build errorGrant Likely
The pattern substitution rules were failing when used with zImage-dtb targets. If zImage-dtb.initrd was selected, the pattern substitution would generate "zImage.initrd-dtb" instead of "zImage-dtb.initrd" which caused the build to fail. This renames zImage-dtb to dtbImage to avoid the problem entirely. By not using the zImage prefix then is no potential for namespace collisions. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-19x86: fix vdso_install breaks user "make install"Sam Ravnborg
I suggest to make the vdso_install step independent as in following patch. This solves the issue at ahnd and still gives us the posibility to install the files should they be needed. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-07[POWERPC] bootwrapper: Build multiple cuImagesGrant Likely
Currently, the kernel uses CONFIG_DEVICE_TREE to wrap a kernel image with a fdt blob which means for any given configuration only one dts file can be selected and so support for only one board can be built This moves the selection of the default .dts file out of the kernel config and into the bootwrapper makefile. The makefile chooses which images to build based on the kernel config and the dts source file name is taken directly from the image name. For example "cuImage.ebony" will use "ebony.dts" as the device tree source file. In addition, this patch allows a specific image to be requested from the command line by adding "cuImage.%" and "treeImage.%" targets to the list of valid built targets in arch/powerpc/Makefile. This allows the default dts selection to be overridden. Another advantage to this change is it allows a single defconfig to be supplied for all boards using the same chip family and only differing in the device tree. Important note: This patch adds two new zImage targets; zImage.dtb.% and zImage.dtb.initrd.% for zImages with embedded dtb files. Currently there are 5 platforms which require this: ps3, ep405, mpc885ads, ep88xc, adder875-redboot and ep8248e. This patch *changes the zImage filenames* for those platforms. ie. 'zImage.ps3' is now 'zImage.dtb.ps3'. This new zImage.dtb targets were added so that the .dts file could be part of the dependancies list for building them. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06[POWERPC] Implement 'make bootwrapper_install'David Woodhouse
This adds a 'bootwrapper_install' make target for the powerpc architecture, which installs the wrapper script, intermediate object files and device-tree sources for later use. This will then allow bootable zImages to be created other than in the context of a kernel build. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-09[POWERPC] Add -mno-spe for ARCH=powerpc buildsKumar Gala
Newer GCC's are capable of autovectorization for ISA extensions like AltiVec and SPE. If we happen to build with one of those compilers we will get SPE instructions in random kernel code. Today we only allow basic interger code in the kernel and FP, AltiVec, or SPE in special explicit locations that have handled the proper saving and restoring of the register state (since on uniprocessor we lazy context switch the register state for FP, AltiVec, and SPE). -mno-spe disables the compiler for automatically generating SPE instructions without our knowledge. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-15kbuild: enable 'make CPPFLAGS=...' to add additional options to CPPSam Ravnborg
The variable CPPFLAGS is a wellknown variable and the usage by kbuild may result in unexpected behaviour. This patch replace use of CPPFLAGS with KBUILD_CPPFLAGS all over the tree and enabling one to use: make CPPFLAGS=... to specify additional CPP commandline options. Patch was tested on following architectures: alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k, s390 Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-15kbuild: enable 'make AFLAGS=...' to add additional options to ASSam Ravnborg
The variable AFLAGS is a wellknown variable and the usage by kbuild may result in unexpected behaviour. On top of that several people over time has asked for a way to pass in additional flags to gcc. This patch replace use of AFLAGS with KBUILD_AFLAGS all over the tree. Patch was tested on following architectures: alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k, s390 Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-14kbuild: enable 'make CFLAGS=...' to add additional options to CCSam Ravnborg
The variable CFLAGS is a wellknown variable and the usage by kbuild may result in unexpected behaviour. On top of that several people over time has asked for a way to pass in additional flags to gcc. This patch replace use of CFLAGS with KBUILD_CFLAGS all over the tree and enabling one to use: make CFLAGS=... to specify additional gcc commandline options. One usecase is when trying to find gcc bugs but other use cases has been requested too. Patch was tested on following architectures: alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k Test was simple to do a defconfig build, apply the patch and check that nothing got rebuild. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-03[POWERPC] Select proper defconfig for crosscompilesAdrian Bunk
The trick for finding the right defconfig is neat, but you forgot to provide an i686_defconfig. ;-) More seriously, cross compiling the defconfig is often useful, e.g. for testing the compilation of patches that touch multiple architectures, and this patch therefore chooses g5_defconfig if $(CROSS_COMPILE) is non-empty. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] powerpc vDSO: install unstripped copies on diskRoland McGrath
This keeps an unstripped copy of the vDSO images built before they are stripped and embedded in the kernel. The unstripped copies get installed in $(MODLIB)/vdso/ by "make install". These files can be useful when they contain source-level debugging information. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] Create and use CONFIG_WORD_SIZEStephen Rothwell
Linus made this suggestion for the x86 merge and this starts the process for powerpc. We assume that CONFIG_PPC64 implies CONFIG_PPC_MERGE and CONFIG_PPC_STD_MMU_32 implies CONFIG_PPC_STD_MMU. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-22[POWERPC] add Kconfig option for optimizing for cellArnd Bergmann
Since the PPE on cell is an in-order core, it suffers significantly from wrong instruction scheduling. This adds a Kconfig option that enables passing -mtune=cell to gcc in order to generate object code that runs well on cell. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22[POWERPC] Stop include asm-ppc when building ARCH=powerpc for ppc32Kumar Gala
We no longer have any dependancies on include/asm-ppc so we can get ride of the makefile hacks to include it in the build process. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-20[POWERPC] Rename 4xx paths to 40xJosh Boyer
4xx is a bit of a misnomer for certain things, as they really apply to PowerPC 40x only. Rename some of the files to clean this up. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-07-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (33 commits) xtensa: use DATA_DATA in xtensa powerpc: add missing DATA_DATA to powerpc cris: use DATA_DATA in cris kallsyms: remove usage of memmem and _GNU_SOURCE from scripts/kallsyms.c kbuild: use -fno-optimize-sibling-calls unconditionally kconfig: reset generated values only if Kconfig and .config agree. kbuild: fix the warning when running make tags kconfig: strip 'CONFIG_' automatically in kernel configuration search kbuild: use POSIX BRE in headers install target Whitelist references from __dbe_table to .init modpost white list pattern adjustment kbuild: do section mismatch check on full vmlinux kbuild: whitelist references from variables named _timer to .init.text kbuild: remove hardcoded _logo names from modpost kbuild: remove hardcoded apic_es7000 from modpost kbuild: warn about references from .init.text to .exit.text kbuild: consolidate section checks kbuild: refactor code in modpost to improve maintainability kbuild: ignore section mismatch warnings originating from .note section kbuild: .paravirtprobe section is obsolete, so modpost doesn't need to handle it ...
2007-07-16powerpc: Refuse to build 64-bit with GCC-4.2.0 and CONFIG_MODULESSegher Boessenkool
...since this won't work (compiler bug, see <http://gcc.gnu.org/PR31490>). Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-06-25[POWERPC] Remove 'make zImage.dts' featureMark A. Greer
Being able to selectively wrap a device tree with the zIimage at build time has been deemed unnecessary, so this removes Makefile support for that feature. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-02[POWERPC] Create a zImage for legacy iSeriesStephen Rothwell
This zImage is really just the stripped vmlinux, but it means that there is one less special case for iSeries and also that the zImages will be built for a combined kernel build that happens to include iSeries. This zImage boots fine on legacy iSeries. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-17[POWERPC] Specify GNUTARGET on $(AR) invocationsSegher Boessenkool
Without this, some versions of GNU ar fail to create an archive index if the object files it is packing together are of a different object format than ar's default format (for example, binutils compiled to default to 64-bit, with 32-bit objects). Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] Add Makefile rules to wrap dts file in zImageMark A. Greer
Add 'zImage.dts' and 'zImage.dts_initrd' build rules that automatically compile and wrap a dts file from arch/powerpc/boot/dts into the zImage file. The resulting zImage will be arch/powerpc/boot/zImage.dts.<platform> and arch/powerpc/boot/zImage.dts_initrd.<platform>, respectively. Having separate rules allows the user to choose whether to include a device tree--and which device tree--at build time. This is useful when one Makefile target builds a zImage that runs on several platforms except for differing device trees. By just setting CONFIG_DEVICE_TREE and running "make zImage.dts" the exact zImage you want is built without Makefile bloat or manually running the wrapper script. The dts file is expected to be arch/powerpc/boot/dts/$(CONFIG_DEVICE_TREE) Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Small cleanups to the cuboot bootwrapper codeDavid Gibson
This patch makes a few small cleanups to the cuboot code. - It removes the double layered selection of images, via cuboot-plat-y, instead having the cuboot platforms directly select a suitable image-y (this changes the name of the final cuboot image from plain cuImage to cuImage.<platform>). - Factors out some code in the wrapper that's potentially useful to platforms other than uboot. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] Enable make installAkinobu Mita
make help on powerpc says make install is available. But it failed due to no rule to make install. This patch enables make install to work. Signed-off-by: Akinobu Mita <mita@fixstars.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] Always use -mno-stringBenjamin Herrenschmidt
The string load/store instructions are unimplemented on some processors and slow (microcoded) on some others. It's simplest to just not use them at all. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] bootwrapper: Add a cuboot platform and a cuImage targetScott Wood
The cuImage target will build a uImage with bootwrapper code and a device tree. The default device tree and platform file are determined by the kernel configuration. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-28[POWERPC] Create a "wrapper" script and use it in arch/powerpc/bootPaul Mackerras
This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15[POWERPC] Remove stale 64bit on 32bit kernel codeAnton Blanchard
Remove some stale POWER3/POWER4/970 on 32bit kernel support. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>