aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/configs/pseries_defconfig
AgeCommit message (Collapse)Author
2013-02-15powerpc: Add transactional memory to pseries and ppc64 defconfigsMichael Neuling
Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-10powerpc: Enable devtmpfs, EFI partition support and tmpfs ACLs on pseries, ↵Anton Blanchard
ppc64 and ppc64e defconfig We need devtmpfs enabled to boot on recent versions of Fedora. EFI partitions will be useful for large block devices. tmpfs ACL support is used by some distros for managing access to devices. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-10powerpc: Cleanup NLS config options on pseries, ppc64 and ppc64e defconfigAnton Blanchard
Set CONFIG_NLS_DEFAULT to utf8. The distros do this (eg ppc64 FC17 and RHEL6) as well as the x86 defconfigs. Userspace these days is most likely to expect utf8 anyway. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-10powerpc: Run savedefconfig over pseries, ppc64 and ppc64e defconfigAnton Blanchard
No changes, just update the configs with savedefconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/pseries: Double NR_CPUS in defconfigNishanth Aravamudan
Anticipating growth in coming years, we should ensure we are getting a good lead on testing. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-10-06Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Benjamin Herrenschmidt: "Some highlights in addition to the usual batch of fixes: - 64TB address space support for 64-bit processes by Aneesh Kumar - Gavin Shan did a major cleanup & re-organization of our EEH support code (IBM fancy PCI error handling & recovery infrastructure) which paves the way for supporting different platform backends, along with some rework of the PCIe code for the PowerNV platform in order to remove home made resource allocations and instead use the generic code (which is possible after some small improvements to it done by Gavin). - Uprobes support by Ananth N Mavinakayanahalli - A pile of embedded updates from Freescale folks, including new SoC and board supports, more KVM stuff including preparing for 64-bit BookE KVM support, ePAPR 1.1 updates, etc..." Fixup trivial conflicts in drivers/scsi/ipr.c * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits) powerpc/iommu: Fix multiple issues with IOMMU pools code powerpc: Fix VMX fix for memcpy case driver/mtd:IFC NAND:Initialise internal SRAM before any write powerpc/fsl-pci: use 'Header Type' to identify PCIE mode powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get powerpc: Remove tlb batching hack for nighthawk powerpc: Set paca->data_offset = 0 for boot cpu powerpc/perf: Sample only if SIAR-Valid bit is set in P7+ powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled powerpc/mpc85xx: Update interrupt handling for IFC controller powerpc/85xx: Enable USB support in p1023rds_defconfig powerpc/smp: Do not disable IPI interrupts during suspend powerpc/eeh: Fix crash on converting OF node to edev powerpc/eeh: Lock module while handling EEH event powerpc/kprobe: Don't emulate store when kprobe stwu r1 powerpc/kprobe: Complete kprobe and migrate exception frame powerpc/kprobe: Introduce a new thread flag powerpc: Remove unused __get_user64() and __put_user64() powerpc/eeh: Global mutex to protect PE tree powerpc/eeh: Remove EEH PE for normal PCI hotplug ...
2012-09-17powerpc: Add denormalisation exception handling for POWER6/7Michael Neuling
On POWER6 and POWER7 if the input operand to an instruction is a denormalised single precision binary floating point value we can take a denormalisation exception where it's expected that the hypervisor (HV=1) will fix up the inputs before the instruction is run. This adds code to handle this denormalisation exception for POWER6 and POWER7. It also add a CONFIG_PPC_DENORMALISATION option and sets it in pseries/ppc64_defconfig. This is useful on bare metal systems only. Based on patch from Milton Miller. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-01powerpc/crypto: rework KconfigSeth Jennings
This patch creates a new submenu for the NX cryptographic hardware accelerator and breaks the NX options into their own Kconfig file under drivers/crypto/nx/Kconfig. This will permit additional NX functionality to be easily and more cleanly added in the future without touching drivers/crypto/Makefile|Kconfig. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-27powerpc: Enable pseries hardware RNG and crypto modulesAnton Blanchard
Enable the hardware RNG and crypto modules. I verified they both autoload via the VIO subsystem, so there is no need to build them in. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03powerpc: Enable jump label supportAnton Blanchard
When looking through some instruction traces I noticed our tracepoint checks were inline. It turns out we don't have CONFIG_JUMP_LABEL enabled. By enabling CONFIG_JUMP_LABEL we replace a load/compare/branch with a nop at every tracepoint call. For example in do_IRQ: CONFIG_JUMP_LABEL disabled: stdx 3,11,9 lwz 0,8(29) cmpwi 7,0,0 bne- 7,.L124 bl .irq_enter CONFIG_JUMP_LABEL enabled: stdx 3,11,9 nop bl .irq_enter Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-03-29irqdomain/powerpc: updated defconfigs for VIRQ_DEBUG renameGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-08powerpc: Enable squashfs as a moduleAnton Blanchard
Most distros use it so we may as well enable it and get regular compile testing. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-08powerpc: Add KVM as module to defconfigsMichael Neuling
Add HV mode KVM to Book3 server 64bit defconfigs as a module. Doesn't add much to the size: text data bss dec hex filename 8244109 4686767 994000 13924876 d47a0c vmlinux.vanilla 8256092 4691607 994128 13941827 d4bc43 vmlinux.kvm This should enable more testing of this configuration. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-19powerpc: Enable lockup and hung task detectors in pseries and ppc64 defeconfigsAnton Blanchard
As a result of changes to Kconfig files, we no longer enable the lockup and hung task detectors. Both are very light weight and provide useful information in the event of a hang, so reenable them. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-19powerpc: Add mpt2sas driver to pseries and ppc64 defconfigAnton Blanchard
Add mpt2sas driver to pseries and ppc64 defconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29powerpc/pseries: remove duplicate SCSI_BNX2_ISCSI in pseries_defconfigMichael Neuling
Remove duplicate assignment of SCSI_BNX2_ISCSI in pseries_defconfig introduced by: 37e0c21e powerpc/pseries: Enable iSCSI support for a number of cards causes warning: arch/powerpc/configs/pseries_defconfig:151:warning: override: reassigning to symbol SCSI_BNX2_ISCSI Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-26cgroup: remove the ns_cgroupDaniel Lezcano
The ns_cgroup is an annoying cgroup at the namespace / cgroup frontier and leads to some problems: * cgroup creation is out-of-control * cgroup name can conflict when pids are looping * it is not possible to have a single process handling a lot of namespaces without falling in a exponential creation time * we may want to create a namespace without creating a cgroup The ns_cgroup was replaced by a compatibility flag 'clone_children', where a newly created cgroup will copy the parent cgroup values. The userspace has to manually create a cgroup and add a task to the 'tasks' file. This patch removes the ns_cgroup as suggested in the following thread: https://lists.linux-foundation.org/pipermail/containers/2009-June/018616.html The 'cgroup_clone' function is removed because it is no longer used. This is a userspace-visible change. Commit 45531757b45c ("cgroup: notify ns_cgroup deprecated") (merged into 2.6.27) caused the kernel to emit a printk warning users that the feature is planned for removal. Since that time we have heard from XXX users who were affected by this. Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Jamal Hadi Salim <hadi@cyberus.ca> Reviewed-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Paul Menage <menage@google.com> Acked-by: Matt Helsley <matthltc@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-19powerpc/pseries: Enable iSCSI support for a number of cardsAnton Blanchard
Enable iSCSI support for a number of cards. We had the base networking devices enabled but forgot to enable iSCSI. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19powerpc/pseries: Enable Emulex and Qlogic 10Gbit cardsAnton Blanchard
Enable the Qlogic and Emulex 10Gbit adapters. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-30powerpc/pseries: Enable Chelsio network and iWARP driversAnton Blanchard
Ensure the Chelsio T3/T4 network drivers and iWARP drivers are enabled in the pseries config. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-21powerpc/pseries: Add BNX2=m to defconfigNishanth Aravamudan
Upcoming servers will include a Broadcom NIC, add to the defconfig to increase testing coverage and make sure mainline builds come up with networking. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-21powerpc: Enable 64kB pages and 1024 threads in pseries configAnton Blanchard
- Enable 64kB pages so it gets some regular testing. - The largest POWER7 has 1024 threads so bump NR_CPUS it to match. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-21powerpc: Disable mcount tracers in pseries defconfigAnton Blanchard
IRQSOFF_TRACER and STACK_TRACER force the kernel to be built with -pg which is a substantial overhead. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-09powerpc: Trim defconfigsBenjamin Herrenschmidt
This trims all our defconfigs using make savedefconfig Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-15powerpc: Disable CONFIG_SYSFS_DEPRECATEDGrant Likely
Acked-by: Grant Likely <grant.likely@secretlab.ca> On 5 May 2010 21:33, "Anton Blanchard" <anton@samba.org> wrote: CONFIG_SYSFS_DEPRECATED can cause issues with newer distros and should not be required for any distro in the last 3 or 4 years, so disable it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-21powerpc: Build-in e1000e for pseries & ppc64_defconfigMichael Neuling
The e1000e device is becoming more common these days, so let's just build it in for pseries & ppc64_defconfig. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-09powerpc: Reduce differences between pseries and ppc64 defconfigsAnton Blanchard
The pseries and ppc64 defconfigs have drifted apart over the years. Reduce some of the differences while still keeping the idea that the ppc64 defconfig is cross platform but enables fewer features than pseries, eg NR_CPUS is lower. Also enable a number of common adapters as modules. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18powerpc/defconfigs: Set HZ=100 on pseries and ppc64 defconfigsAnton Blanchard
Now we have high res timers there is less of a reason for a high HZ value. Furthermore I think there a few reasons we should reduce HZ to 100: - Timer interrupt overhead. While this overhead is small, there are applications that are very sensitive to jitter (eg some HPC apps). - Issues with the timer wheel code. When coming out of NO_HZ idle we work our way through the timer code one tick at a time. If we have been idle a long time, this adds up - I sometimes see milliseconds of time spent in that loop. Long term we should fix the timer wheel algorithm, but for now if we reduce HZ then we reduce the amount of work the timer code has to do when coming out of idle. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18powerpc/defconfigs: Disable token ring in powerpc defconfigsAnton Blanchard
Token what? Lets save some space in our powerpc kernels and remove token ring support. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18powerpc/defconfigs: Reduce 64bit vmlinux by making acenic and cramfs modulesAnton Blanchard
Machines with acenic adapters are rare these days, so we may as well make it a module. Cramfs is also very rarely used so we can make it a module. Together this saves 143kB on a 64bit compile: text data bss dec hex filename 8247176 1729404 1221988 11198568 aae068 vmlinux~ 8134997 1727588 1188836 11051421 a8a19d vmlinux Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-28powerpc: Disable HCALL_STATS by defaultAnton Blanchard
The overhead of HCALL_STATS is quite high and the functionality is very rarely used. Key statistics are also missing (eg min/max). With the new hcall tracepoints much more powerful tracing can be done in a kernel module. Lets disable this by default. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-07powerpc/pseries: Enable relay in pseries_defconfigAnton Blanchard
Enable relay in pseries config, ppc64_defconfig had it enabled but pseries did not. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-26eeprom: More consistent symbol namesJean Delvare
Now that all EEPROM drivers live in the same place, let's harmonize their symbol names. Also fix eeprom's dependencies, it definitely needs sysfs, and is no longer experimental after many years in the kernel tree. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net>
2008-11-11powerpc: Update desktop/server defconfigsPaul Mackerras
Turned off CONFIG_PCI_LEGACY and turned on EXT4, and otherwise mostly took the defaults. This also updates ppc6xx_defconfig, which covers the 6xx/7xx/7xxx-based embedded boards. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-26powerpc: Update defconfigs for most non-embedded platformsPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-15powerpc: Add driver for Barrier Synchronization RegisterSonny Rao
Adds a character driver for BSR support on IBM POWER systems including Power5 and Power6. The BSR is an optional processor facility not currently implemented by any other processors. It's primary purpose is fast large SMP synchronization. More details on the BSR are in comments to the code which follows. This patch adds BSR driver to pseries_defconfig. Signed-off-by: Sonny Rao <sonnyrao@linux.vnet.ibm.com> Signed-off-by: Joel Schopp <jschopp@austin.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-05-20[POWERPC] Update defconfigs for desktop/server systemsPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-07[POWERPC] Remove CONFIG_PCI_LEGACY from some configsStephen Rothwell
This will remove some build warnings and doesn't stop us building any drivers that we were building previously with these configs. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-20[POWERPC] Update some defconfigsPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06[POWERPC] Update defconfigsPaul Mackerras
This updates all the defconfigs in arch/powerpc/configs except iseries and ps3, which were updated by the preceding commits. This mostly takes the defaults, except that I turned on tickless idle and high-resolution timers for everything, and turned off instrumentation support and "Fair group CPU scheduler" for the smaller/embedded platforms. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-19task cgroups: enable cgroups by default in some configsPaul Jackson
In pre-cgroup cpusets, a few config files enabled cpusets by default. Signed-off-by: Paul Jackson <pj@sgi.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17[POWERPC] Enable NO_HZ and high res timers for pseries and ppc64 configsAnton Blanchard
Enable NO_HZ and high res timers for the ppc64 and pseries defconfigs. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17[POWERPC] Enable SLUB in *_defconfigAnton Blanchard
When checking out the new NO_HZ support in powerpc, I noticed we never slept for more than 2 seconds. It turns out SLAB has a 2 second per cpu timer that causes this. After switching to SLUB I see some nice 4 second sleeps which is the limit on this POWER6 box (the decrementer ticks at 512MHz): slept 4.19 sec slept 4.19 sec slept 4.19 sec slept 4.19 sec slept 3.96 sec slept 3.80 sec slept 2.99 sec Since SLUB is now the default and some powerpc defconfigs already enable it, lets enable SLUB across the board for consistency. While doing this I also noticed that the maple defconfig has SLAB debugging enabled which is sure to make your box nice and slow. Fix that too. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30[POWERPC] Update defconfigsPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-26[POWERPC] Update defconfigsPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-17[POWERPC] use winbond libata instead of ide driver for pseries CD drivesOlaf Hering
Change the default for the built-in IDE on p610/p615/p630 from ide to libata. libata has better error handling and the drive can recover when hald does its CD media polling. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-22[POWERPC] Update defconfigsPaul Mackerras
Mostly took the defaults, except tried to get the netfilter options more or less as they were before. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-21[PATCH] Reintroduce NODES_SPAN_OTHER_NODES for powerpcAndy Whitcroft
Reintroduce NODES_SPAN_OTHER_NODES for powerpc Revert "[PATCH] Remove SPAN_OTHER_NODES config definition" This reverts commit f62859bb6871c5e4a8e591c60befc8caaf54db8c. Revert "[PATCH] mm: remove arch independent NODES_SPAN_OTHER_NODES" This reverts commit a94b3ab7eab4edcc9b2cb474b188f774c331adf7. Also update the comments to indicate that this is still required and where its used. Signed-off-by: Andy Whitcroft <apw@shadowen.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Kravetz <kravetz@us.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Will Schmidt <will_schmidt@vnet.ibm.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[POWERPC] Update pSeries defconfig for SATABrian King
Since the ipr driver now supports SATA and depends on libata, enable libata to get built. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-26[POWERPC] update powerpc defconfig files after libata kconfig breakageOlaf Hering
Update defconfig files after libata .config breakage sed -i 's/CONFIG_SCSI_SATA_/CONFIG_SATA_/;s/CONFIG_SCSI_SATA/CONFIG_ATA/' arch/powerpc/configs/*g Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-27 13:26:41 +0000