aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/sysdev
AgeCommit message (Collapse)Author
2013-02-20Merge remote-tracking branch 'agust/next' into nextBenjamin Herrenschmidt
<< Please pull mpc5xxx patches for v3.9. The bestcomm driver is moved to drivers/dma (so it will be usable for ColdFire). mpc5121 now provides common dtsi file and existing mpc5121 device trees use it. There are some minor clock init and sparse fixes and updates for various 5200 device tree files from Grant. Some fixes for bugs in the mpc5121 DIU driver are also included here (Andrew Morton suggested to push them via my mpc5xxx tree). >>
2013-02-19powerpc/85xx: l2sram - Add compatible string for BSC9131 platformHarninder Rai
Signed-off-by: Harninder Rai <harninder.rai@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-02-15powerpc/mpic: allow coreint to be determined by MPIC versionScott Wood
This will be used by the qemu-e500 platform, as the MPIC version (and thus whether we have coreint) depends on how QEMU is configured. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-02-15powerpc/fsl_pci: Store the pci ctlr device ptr in the pci ctlr structVarun Sethi
The pci controller structure has a provision to store the device structure pointer of the corresponding platform device. Currently this information is not stored during fsl pci controller initialization. This information is required while dealing with iommu groups for pci devices connected to the fsl pci controller. For the case where the pci devices can't be paritioned, they would fall under the same device group as the pci controller. This patch stores the platform device information in the pci controller structure during initialization. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-02-13powerpc/85xx: fix various PCI node compatible stringsTimur Tabi
Fix and/or improve the compatible strings of the PCI device tree nodes for some Freescale SOCs. This fixes some issues and improves consistency among the SOCs. Specifically: 1) The P1022 has a v1 PCIe controller, so the compatible property should just say "fsl,mpc8548-pcie". U-Boot does not look for "fsl,p1022-pcie", so it wasn't fixing up the node. 2) The P4080 has a v2.1 PCIe controller, so add that version-specific string to the device tree. Update the kernel to also look for that string. Currently, the kernel looks for "fsl,p4080-pcie" specifically, but eventually that check should be deleted. 3) The P1010 device tree claims compatibility with v2.2 and v2.3, but that's redundant. No other device tree does this. Remove the v2.2 string. 4) The kernel looks for both "fsl,p1023-pcie" and "fsl,qoriq-pcie-v2.2", even though the P1023 device trees has always included both strings. Remove the search for "fsl,p1023-pcie". Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-02-12powerpc/fsl: msi: sparse fixesKim Phillips
arch/powerpc/sysdev/fsl_msi.c:31:1: warning: symbol 'msi_head' was not declared. Should it be static? arch/powerpc/sysdev/fsl_msi.c:138:40: warning: incorrect type in argument 1 (different base types) arch/powerpc/sysdev/fsl_msi.c:138:40: expected restricted __be64 const [usertype] *p arch/powerpc/sysdev/fsl_msi.c:138:40: got unsigned long long const [usertype] *[assigned] reg Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-02-12powerpc/fsl: ifc: sparse fixesKim Phillips
arch/powerpc/sysdev/fsl_ifc.c:66:38: warning: incorrect type in initializer (different base types) arch/powerpc/sysdev/fsl_ifc.c:66:38: expected restricted __be32 [usertype] cspr arch/powerpc/sysdev/fsl_ifc.c:66:38: got unsigned int arch/powerpc/sysdev/fsl_ifc.c:67:21: warning: restricted __be32 degrades to integer arch/powerpc/sysdev/fsl_ifc.c:67:39: warning: restricted __be32 degrades to integer Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-02-12powerpc/fsl: fsl_soc: sparse fixesKim Phillips
arch/powerpc/sysdev/fsl_soc.c:70:67: warning: incorrect type in argument 2 (different base types) arch/powerpc/sysdev/fsl_soc.c:70:67: expected restricted __be32 const [usertype] *addr arch/powerpc/sysdev/fsl_soc.c:70:67: got unsigned int const [usertype] * Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-02-12powerpc/fsl: lbc: sparse fixesKim Phillips
arch/powerpc/sysdev/fsl_lbc.c:77:36: warning: incorrect type in initializer (different base types) arch/powerpc/sysdev/fsl_lbc.c:77:36: expected restricted __be32 [usertype] br arch/powerpc/sysdev/fsl_lbc.c:77:36: got unsigned int arch/powerpc/sysdev/fsl_lbc.c:78:36: warning: incorrect type in initializer (different base types) arch/powerpc/sysdev/fsl_lbc.c:78:36: expected restricted __be32 [usertype] or arch/powerpc/sysdev/fsl_lbc.c:78:36: got unsigned int arch/powerpc/sysdev/fsl_lbc.c:80:21: warning: restricted __be32 degrades to integer arch/powerpc/sysdev/fsl_lbc.c:80:38: warning: restricted __be32 degrades to integer arch/powerpc/sysdev/fsl_lbc.c:111:12: warning: incorrect type in assignment (different base types) arch/powerpc/sysdev/fsl_lbc.c:111:12: expected restricted __be32 [usertype] br arch/powerpc/sysdev/fsl_lbc.c:111:12: got unsigned int arch/powerpc/sysdev/fsl_lbc.c:113:17: warning: restricted __be32 degrades to integer arch/powerpc/sysdev/fsl_lbc.c:127:17: warning: restricted __be32 degrades to integer Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-02-08powerpc: fix ics_rtas_init and start_secondary section mismatchDaniel Borkmann
It seems, we're fine with just annotating the two functions. Thus, this fixes the following build warnings on ppc64: WARNING: arch/powerpc/sysdev/xics/built-in.o(.text+0x1664): The function .ics_rtas_init() references the function __init .xics_register_ics(). This is often because .ics_rtas_init lacks a __init annotation or the annotation of .xics_register_ics is wrong. WARNING: arch/powerpc/sysdev/built-in.o(.text+0x6044): The function .ics_rtas_init() references the function __init .xics_register_ics(). This is often because .ics_rtas_init lacks a __init annotation or the annotation of .xics_register_ics is wrong. WARNING: arch/powerpc/kernel/built-in.o(.text+0x2db30): The function .start_secondary() references the function __cpuinit .vdso_getcpu_init(). This is often because .start_secondary lacks a __cpuinit annotation or the annotation of .vdso_getcpu_init is wrong. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05powerpc/mpc5xxx: fix sparse warning for non static symbolAnatolij Gustschin
Fix warning: symbol 'mpc5xxx_get_bus_frequency' was not declared. Should it be static? Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-01-29powerpc/mpic: Make distribute_irqs obey MPIC_SINGLE_DEST_CPUScott Wood
Previously we were setting an illegal configuration on mpc85xx MPICs if CONFIG_IRQ_ALL_CPUS is enabled (which for some reason it is in mpc85xx_smp_defconfig). Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-10powerpc: Build kernel with -mcmodel=mediumAnton Blanchard
Finally remove the two level TOC and build with -mcmodel=medium. Unfortunately we can't build modules with -mcmodel=medium due to the tricks the kernel module loader plays with percpu data: # -mcmodel=medium breaks modules because it uses 32bit offsets from # the TOC pointer to create pointers where possible. Pointers into the # percpu data area are created by this method. # # The kernel module loader relocates the percpu data section from the # original location (starting with 0xd...) to somewhere in the base # kernel percpu data space (starting with 0xc...). We need a full # 64bit relocation for this to work, hence -mcmodel=large. On older kernels we fall back to the two level TOC (-mminimal-toc) Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-10powerpc/44x: Support OCM(On Chip Memory) for APM821xx SoC and Bluestone boardVinh Nguyen Huu Tuong
This patch consists of: - Add driver for OCM component - Export OCM Information at /sys/kernel/debug/ppc4xx_ocm/info Signed-off-by: Vinh Nguyen Huu Tuong <vhtnguyen@apm.com> Acked-by: Josh Boyer <jwboyer@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-03POWERPC: drivers: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03powerpc, dma: move bestcomm driver from arch/powerpc/sysdev to drivers/dmaPhilippe De Muyter
The bestcomm dma hardware, and some of its users like the FEC ethernet component, is used in different FreeScale parts, including non-powerpc parts like the ColdFire MCF547x & MCF548x families. Don't keep the driver hidden in arch/powerpc where it is inaccessible for other arches. .c files are moved to drivers/dma/bestcomm, while .h files are moved to include/linux/fsl/bestcomm. Makefiles, Kconfigs and #include directives are updated for the new file locations. Tested by recompiling for MPC5200 with all bestcomm users enabled. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2012-12-18Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc update from Benjamin Herrenschmidt: "The main highlight is probably some base POWER8 support. There's more to come such as transactional memory support but that will wait for the next one. Overall it's pretty quiet, or rather I've been pretty poor at picking things up from patchwork and reviewing them this time around and Kumar no better on the FSL side it seems..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (73 commits) powerpc+of: Rename and fix OF reconfig notifier error inject module powerpc: mpc5200: Add a3m071 board support powerpc/512x: don't compile any platform DIU code if the DIU is not enabled powerpc/mpc52xx: use module_platform_driver macro powerpc+of: Export of_reconfig_notifier_[register,unregister] powerpc/dma/raidengine: add raidengine device powerpc/iommu/fsl: Add PAMU bypass enable register to ccsr_guts struct powerpc/mpc85xx: Change spin table to cached memory powerpc/fsl-pci: Add PCI controller ATMU PM support powerpc/86xx: fsl_pcibios_fixup_bus requires CONFIG_PCI drivers/virt: the Freescale hypervisor driver doesn't need to check MSR[GS] powerpc/85xx: p1022ds: Use NULL instead of 0 for pointers powerpc: Disable relocation on exceptions when kexecing powerpc: Enable relocation on during exceptions at boot powerpc: Move get_longbusy_msecs into hvcall.h and remove duplicate function powerpc: Add wrappers to enable/disable relocation on exceptions powerpc: Add set_mode hcall powerpc: Setup relocation on exceptions for bare metal systems powerpc: Move initial mfspr LPCR out of __init_LPCR powerpc: Add relocation on exception vector handlers ...
2012-12-13Merge tag 'kvm-3.8-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Marcelo Tosatti: "Considerable KVM/PPC work, x86 kvmclock vsyscall support, IA32_TSC_ADJUST MSR emulation, amongst others." Fix up trivial conflict in kernel/sched/core.c due to cross-cpu migration notifier added next to rq migration call-back. * tag 'kvm-3.8-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (156 commits) KVM: emulator: fix real mode segment checks in address linearization VMX: remove unneeded enable_unrestricted_guest check KVM: VMX: fix DPL during entry to protected mode x86/kexec: crash_vmclear_local_vmcss needs __rcu kvm: Fix irqfd resampler list walk KVM: VMX: provide the vmclear function and a bitmap to support VMCLEAR in kdump x86/kexec: VMCLEAR VMCSs loaded on all cpus if necessary KVM: MMU: optimize for set_spte KVM: PPC: booke: Get/set guest EPCR register using ONE_REG interface KVM: PPC: bookehv: Add EPCR support in mtspr/mfspr emulation KVM: PPC: bookehv: Add guest computation mode for irq delivery KVM: PPC: Make EPCR a valid field for booke64 and bookehv KVM: PPC: booke: Extend MAS2 EPN mask for 64-bit KVM: PPC: e500: Mask MAS2 EPN high 32-bits in 32/64 tlbwe emulation KVM: PPC: Mask ea's high 32-bits in 32/64 instr emulation KVM: PPC: e500: Add emulation helper for getting instruction ea KVM: PPC: bookehv64: Add support for interrupt handling KVM: PPC: bookehv: Remove GET_VCPU macro from exception handler KVM: PPC: booke: Fix get_tb() compile error on 64-bit KVM: PPC: e500: Silence bogus GCC warning in tlb code ...
2012-11-29powerpc: Fix fallout from device_node->name constificationGrant Likely
Commit c22618a1, "drivers/of: Constify device_node->name and ->path_component_name" changes device_node name to a const value, but the PowerPC scom code still assigns it to a non-void field in debugfs_blob_wrapper. The /right/ solution might be to change the debugfs_blob_wrapper->data to also be const, but that is a bit risky. Instead, cast the value to (void*). It is a bit ugly, but it is the safest change until it can be investigated where debugfs_blob_wrapper can be modified. Reported-by: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-25powerpc/fsl-pci: Add PCI controller ATMU PM supportJia Hongtao
Power supply for PCI controller ATMU registers is off when system go to deep-sleep state. So ATMU registers should be re-setup during PCI controllers resume from sleep. Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-11-17drivers/of: Constify device_node->name and ->path_component_nameGrant Likely
Neither of these should ever be changed once set. Make them const and fix up the users that try to modify it in-place. In one case kmalloc+memcpy is replaced with kstrdup() to avoid modifying the string. Build tested with defconfigs on ARM, PowerPC, Sparc, MIPS, x86 among others. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Julian Calaby <julian.calaby@gmail.com>
2012-11-15powerpc: Fix typos in Freescale copyright claimsYang Li
There are many cases that Semiconductor is misspelled. The patch fix these typos. Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/sysdev: Use module_platform_driver macroSrinivas Kandagatla
This patch removes some code duplication by using module_platform_driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-10-29Merge remote-tracking branch 'master' into queueMarcelo Tosatti
Merge reason: development work has dependency on kvm patches merged upstream. Conflicts: arch/powerpc/include/asm/Kbuild arch/powerpc/include/asm/kvm_para.h Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-10-10Merge branch 'for-upstream' of http://github.com/agraf/linux-2.6 into queueMarcelo Tosatti
* 'for-upstream' of http://github.com/agraf/linux-2.6: (56 commits) arch/powerpc/kvm/e500_tlb.c: fix error return code KVM: PPC: Book3S HV: Provide a way for userspace to get/set per-vCPU areas KVM: PPC: Book3S: Get/set guest FP regs using the GET/SET_ONE_REG interface KVM: PPC: Book3S: Get/set guest SPRs using the GET/SET_ONE_REG interface KVM: PPC: set IN_GUEST_MODE before checking requests KVM: PPC: e500: MMU API: fix leak of shared_tlb_pages KVM: PPC: e500: fix allocation size error on g2h_tlb1_map KVM: PPC: Book3S HV: Fix calculation of guest phys address for MMIO emulation KVM: PPC: Book3S HV: Remove bogus update of physical thread IDs KVM: PPC: Book3S HV: Fix updates of vcpu->cpu KVM: Move some PPC ioctl definitions to the correct place KVM: PPC: Book3S HV: Handle memory slot deletion and modification correctly KVM: PPC: Move kvm->arch.slot_phys into memslot.arch KVM: PPC: Book3S HV: Take the SRCU read lock before looking up memslots KVM: PPC: bookehv: Allow duplicate calls of DO_KVM macro KVM: PPC: BookE: Support FPU on non-hv systems KVM: PPC: 440: Implement mfdcrx KVM: PPC: 440: Implement mtdcrx Document IACx/DACx registers access using ONE_REG API KVM: PPC: E500: Remove E500_TLB_DIRTY flag ...
2012-10-05powerpc/fsl-soc: use CONFIG_EPAPR_PARAVIRT for hcallsScott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-06Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Benjamin Herrenschmidt: "Some highlights in addition to the usual batch of fixes: - 64TB address space support for 64-bit processes by Aneesh Kumar - Gavin Shan did a major cleanup & re-organization of our EEH support code (IBM fancy PCI error handling & recovery infrastructure) which paves the way for supporting different platform backends, along with some rework of the PCIe code for the PowerNV platform in order to remove home made resource allocations and instead use the generic code (which is possible after some small improvements to it done by Gavin). - Uprobes support by Ananth N Mavinakayanahalli - A pile of embedded updates from Freescale folks, including new SoC and board supports, more KVM stuff including preparing for 64-bit BookE KVM support, ePAPR 1.1 updates, etc..." Fixup trivial conflicts in drivers/scsi/ipr.c * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits) powerpc/iommu: Fix multiple issues with IOMMU pools code powerpc: Fix VMX fix for memcpy case driver/mtd:IFC NAND:Initialise internal SRAM before any write powerpc/fsl-pci: use 'Header Type' to identify PCIE mode powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get powerpc: Remove tlb batching hack for nighthawk powerpc: Set paca->data_offset = 0 for boot cpu powerpc/perf: Sample only if SIAR-Valid bit is set in P7+ powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled powerpc/mpc85xx: Update interrupt handling for IFC controller powerpc/85xx: Enable USB support in p1023rds_defconfig powerpc/smp: Do not disable IPI interrupts during suspend powerpc/eeh: Fix crash on converting OF node to edev powerpc/eeh: Lock module while handling EEH event powerpc/kprobe: Don't emulate store when kprobe stwu r1 powerpc/kprobe: Complete kprobe and migrate exception frame powerpc/kprobe: Introduce a new thread flag powerpc: Remove unused __get_user64() and __put_user64() powerpc/eeh: Global mutex to protect PE tree powerpc/eeh: Remove EEH PE for normal PCI hotplug ...
2012-10-04powerpc/iommu: Fix multiple issues with IOMMU pools codeAnton Blanchard
There are a number of issues in the recent IOMMU pools code: - On a preempt kernel we might switch CPUs in the middle of building a scatter gather list. When this happens the handle hint passed in no longer falls within the local CPU's pool. Check for this and fall back to the pool hint. - We were missing a spin_unlock/spin_lock in one spot where we switch pools. - We need to provide locking around dart_tlb_invalidate_all and dart_tlb_invalidate_one now that the global lock is gone. Reported-by: Alexander Graf <agraf@suse.de> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@kernel.org> [v3.6]
2012-09-27powerpc/fsl-pci: use 'Header Type' to identify PCIE modeMinghuan Lian
The original code uses 'Programming Interface' field to judge if PCIE is EP or RC mode, however, some latest silicons do not support this functionality. According to PCIE specification, 'Header Type' offset 0x0e is used to indicate header type, so change code to use 'Header Type' field to judge PCIE mode. Because FSL PCI controller does not support 'Header Type', patch still uses 'Programming Interface' to identify PCI mode. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-19powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabledJia Hongtao
Fix the following warning: arch/powerpc/sysdev/fsl_pci.c: In function 'fsl_pci_probe': arch/powerpc/sysdev/fsl_pci.c:867:25: error: unused variable 'hose' Signed-off-by: Jia Hongtao <B38951@freescale.com> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-19powerpc/mpc85xx: Update interrupt handling for IFC controllerPrabhakar Kushwaha
IFC may have one or two interrupts. If two interrupt specifiers are present, the first is the "common" interrupt (CM_EVTER_STAT), and the second is the NAND interrupt (NAND_EVTER_STAT). If there is only one, that interrupt reports both types of event. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-13Merge branch 'ofdeviceiddata' of git://git.pengutronix.de/git/ukl/linux into ↵Olof Johansson
next/fixes-non-critical From "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>: this is the 2nd version of this series whose goal is to make struct of_device_id.data const. Conceptually a driver must not modify the data contained there so making it const is the right thing. v1 of this series was sent with Message-id: 1342182734-321-1-git-send-email-y. Changes since then are: - powerpc fixes - several new consts that were found by Arnd that are possible after patch 19. Arnd suggested to take this series via arm-soc late for 3.6 in one go because patch 19 depends on the former patches but is a precondition to the latter and it fixes a few warnings. So getting it in via the respective maintainer trees would need a much bigger coordination effort. That means I prefer getting Acks over you taking the patch. Vinod Koul already took dmaengine: at_hdmac: add a few const qualifiers that is in next-20120723 as 7fd63ccdad72 now. Vinod, I don't follow your pull requests, but assuming you didn't let it already pull for 3.6 I suggest you drop it from your queue and I just take your Ack. This series was build tested for arm (all defconfigs) and powerpc (all defconfigs and an allyesconfig) and grep didn't find more issues. As before it introduces a warning in drivers/regulator/twl-regulator.c. This driver does modify its .of_match_table when a device is bound which doesn't fits the concept of independant devices. Arnd noticed another new warning in drivers/scsi/qlogicpti.c that isn't that easy to resolve, because the pointer to (now) const data is passed as first argument to scsi_host_alloc. To fix that properly struct Scsi_Host.hostt needs to get a const, too. Alternatively I could introduce a cast removing the const, but I don't like that. * 'ofdeviceiddata' of git://git.pengutronix.de/git/ukl/linux: (25 commits) dma: tegra: make data used as *of_device_id.data const can: mpc5xxx_can: make data used as *of_device_id.data const macintosh/mediabay: make data used as *of_device_id.data const i2c/mpc: make data used as *of_device_id.data const mfd/da9052: make i2c_device_id array const powerpc/fsl_msi: drop unneeded cast to non-const pointer gpio/gpio-omap: make platformdata used as *of_device_id.data const of: add const to struct *of_device_id.data dma: tegra: make tegra_dma.chip_data a pointer to const data watchdog/mpc8xxx: add a const qualifier powerpc/celleb_pci: add a const qualifier powerpc/fsl_msi: add a const qualifier powerpc/83xx: add a const qualifier macintosh/mediabay: add a const qualifier mmc/omap_hsmmc: add a const qualifier i2c/mpc: add a const qualifier i2c/i2c-omap: add a const qualifier gpio/mpc8xxx: add a const qualifier gpio/gpio-omap.c: add a const qualifier misc/atmel_tc: make atmel_tc.tcb_config member point to const data Signed-off-by: Arnd Bergmann <arnd@arndb.de> [olof: repulled a v3 version of the branch that rebased to add some more acked-bys and added one more patch on top for tegra] Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-12powerpc/fsl-pci: Unify pci/pcie initialization codeJia Hongtao
We unified the Freescale pci/pcie initialization by changing the fsl_pci to a platform driver. In previous PCI code architecture the initialization routine is called at board_setup_arch stage. Now the initialization is done in probe function which is architectural better. Also It's convenient for adding PM support for PCI controller in later patch. Now we registered pci controllers as platform devices. So we combine two initialization code as one platform driver. Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/pci: Use PCIe IP block revision register instead of compatibleRoy Zang
Freescale PCIe IP block revision bigger than rev2.2 will also need redefine the sequence of inbound windows. So change to use IP block revision instead of compatible for the judgment. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/pci: Add IP revision register define for Freescale PCIe controllerRoy Zang
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/mpic: FSL MPIC error interrupt support.Varun Sethi
All SOC device error interrupts are muxed and delivered to the core as a single MPIC error interrupt. Currently all the device drivers requiring access to device errors have to register for the MPIC error interrupt as a shared interrupt. With this patch we add interrupt demuxing capability in the mpic driver, allowing device drivers to register for their individual error interrupts. This is achieved by handling error interrupts in a cascaded fashion. MPIC error interrupt is handled by the "error_int_handler", which subsequently demuxes it using the EISR and delivers it to the respective drivers. The error interrupt capability is dependent on the MPIC EIMR register, which was introduced in FSL MPIC version 4.1 (P4080 rev2). So, error interrupt demuxing capability is dependent on the MPIC version and can be used for versions >= 4.1. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/swiotlb: Enable at early stage and disable if not necessaryJia Hongtao
Remove the dependency on PCI initialization for SWIOTLB initialization. So that PCI can be initialized at proper time. SWIOTLB is partly determined by PCI inbound/outbound map which is assigned in PCI initialization. But swiotlb_init() should be done at the stage of mem_init() which is much earlier than PCI initialization. So we reserve the memory for SWIOTLB first and free it if not necessary. All boards are converted to fit this change. Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/mpic: finish supporting timer group B on Freescale chipsVarun Sethi
Previously, these interrupts would be mapped, but the offset calculation was broken, and only the first group was initialized. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/fsl-pci: add fsl,qoriq-pcie-v2.4 compatible stringTimur Tabi
The PCI controller on the Freescale P5040 is v2.4. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/85xx: L2sram - Add compatible string to the device id listTang Yuantian
The following platforms are supported: mpc8544, mpc8572, mpc8536, p1021, p1025, p1024, p1010. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-11powerpc/fsl_msi: drop unneeded cast to non-const pointerArnd Bergmann
This cast is unneeded since *of_device_id.data became const. [ukl: split Arnd's patch by driver and add changelog] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2012-09-11powerpc/fsl_msi: add a const qualifierUwe Kleine-König
This prepares *of_device_id.data becoming const. Without this change the following warning would occur: arch/powerpc/sysdev/fsl_msi.c: In function 'fsl_of_msi_probe': arch/powerpc/sysdev/fsl_msi.c:379:11: error: assignment discards 'const' qualifier from pointer target type [-Werror] Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2012-09-07Merge branch 'merge' into nextBenjamin Herrenschmidt
Brings in various bug fixes from 3.6-rcX
2012-09-05powerpc: Make sure IPI handlers see data written by IPI sendersPaul Mackerras
We have been observing hangs, both of KVM guest vcpu tasks and more generally, where a process that is woken doesn't properly wake up and continue to run, but instead sticks in TASK_WAKING state. This happens because the update of rq->wake_list in ttwu_queue_remote() is not ordered with the update of ipi_message in smp_muxed_ipi_message_pass(), and the reading of rq->wake_list in scheduler_ipi() is not ordered with the reading of ipi_message in smp_ipi_demux(). Thus it is possible for the IPI receiver not to see the updated rq->wake_list and therefore conclude that there is nothing for it to do. In order to make sure that anything done before smp_send_reschedule() is ordered before anything done in the resulting call to scheduler_ipi(), this adds barriers in smp_muxed_message_pass() and smp_ipi_demux(). The barrier in smp_muxed_message_pass() is a full barrier to ensure that there is a full ordering between the smp_send_reschedule() caller and scheduler_ipi(). In smp_ipi_demux(), we use xchg() rather than xchg_local() because xchg() includes release and acquire barriers. Using xchg() rather than xchg_local() makes sense given that ipi_message is not just accessed locally. This moves the barrier between setting the message and calling the cause_ipi() function into the individual cause_ipi implementations. Most of them -- those that used outb, out_8 or similar -- already had a full barrier because out_8 etc. include a sync before the MMIO store. This adds an explicit barrier in the two remaining cases. These changes made no measurable difference to the speed of IPIs as measured using a simple ping-pong latency test across two CPUs on different cores of a POWER7 machine. The analysis of the reason why processes were not waking up properly is due to Milton Miller. Cc: stable@vger.kernel.org # v3.0+ Reported-by: Milton Miller <miltonm@bga.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc/dart: Remove uses of virt_to_abs() and abs_to_virt()Michael Ellerman
These days they are just wrappers around __pa() and __va() respectively. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc/mpic_msgr: Add missing includesScott Wood
Add several #includes that mpic_msgr relies on being pulled implicitly, which only happens on certain configs. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Meador Inge <meador_inge@mentor.com> Cc: Jia Hongtao <B38951@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-03powerpc/fsl-pci: Only scan PCI bus if configured as a hostJia Hongtao
We change fsl_add_bridge to return -ENODEV if the controller is working in agent mode. Then check the return value of fsl_add_bridge to guarantee that only successfully added host bus will be scanned. Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-31Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull irqdomain changes from Grant Likely: "Round of refactoring and enhancements to irq_domain infrastructure. This series starts the process of simplifying irqdomain. The ultimate goal is to merge LEGACY, LINEAR and TREE mappings into a single system, but had to back off from that after some last minute bugs. Instead it mainly reorganizes the code and ensures that the reverse map gets populated when the irq is mapped instead of the first time it is looked up. Merging of the irq_domain types is deferred to v3.7 In other news, this series adds helpers for creating static mappings on a linear or tree mapping." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6: irqdomain: Improve diagnostics when a domain mapping fails irqdomain: eliminate slow-path revmap lookups irqdomain: Fix irq_create_direct_mapping() to test irq_domain type. irqdomain: Eliminate dedicated radix lookup functions irqdomain: Support for static IRQ mapping and association. irqdomain: Always update revmap when setting up a virq irqdomain: Split disassociating code into separate function irq_domain: correct a minor wrong comment for linear revmap irq_domain: Standardise legacy/linear domain selection irqdomain: Make ops->map hook optional irqdomain: Remove unnecessary test for IRQ_DOMAIN_MAP_LEGACY irqdomain: Simple NUMA awareness. devicetree: add helper inline for retrieving a node's full name
2012-07-31Merge remote-tracking branch 'kumar/merge' into mergeBenjamin Herrenschmidt
Kumar says: "A few patches that missed the initial 3.6 window. These are bug fixes at this point."
2012-07-26powerpc/85xx: Fix sram_offset parameter typeClaudiu Manoil
The sram_offset parameter represents a physical address and should be of type phys_addr_t. As part of this fix, the extraction of sram_params is being cleaned-up and fixed. This patch fixes now the case when the offset value of 0xfff00000 was being rejected by the driver (returning -EINVAL), although this is a valid offset value. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-30 00:03:47 +0000