aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/kernel/cpu/sh4a
AgeCommit message (Collapse)Author
2013-12-24sh: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24sh: sh772[34]: Set serial port sampling rate to 8 for SCIFA portsLaurent Pinchart
SCIFA ports on sh7723 and sh7724 seem to use a sampling rate of half the value specified in the datasheet. This is currently handled by a custom baud rate calculation algorithm. The algorithm ID will be removed from platform data, set the sampling rate directly instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24sh: Declare SCIF register base and IRQ as resourcesLaurent Pinchart
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-14sh: delete __cpuinit usage from all sh filesPaul Gortmaker
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/sh uses of the __cpuinit macros from all C files. Currently sh does not have any __CPUINIT used in assembly files. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-sh@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-07sh_eth: get SH7724 support out of #ifdefSergei Shtylyov
Get the SH7724 code/data in the driver out of #ifdef by adding "r8a7724-ether" to the platform driver's ID table. Change the Ether platform device's name in the SH platform code accordingly. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-07sh_eth: get SH77{34|63} support out of #ifdefSergei Shtylyov
Get the SH77{34|63} specific code/data in the driver out of #ifdef by adding "sh7734-gether" and "sh7763-gether" to the platform driver's ID table. Note that we have to split the 'struct sh_eth_cpu_data' instance into two due to #ifdef inside it; note that we can kill the duplicate sh_eth_set_rate_gether(). Change the GEther platform device's name in the SH platform code accordingly. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-09Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
2013-03-20sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIBAlexandre Courbot
SH GPIO drivers all use gpiolib and CONFIG_GENERIC_GPIO is only selected through CONFIG_GPIOLIB, yet some compilation units depended on CONFIG_GENERIC_GPIO. Make them depend on CONFIG_GPIOLIB instead since it is more accurate and prepares us for the future removal of CONFIG_GENERIC_GPIO. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-15sh: shx3: Add pin control resourcesLaurent Pinchart
Add memory resources for the pin control platform device to let the sh-pfc driver ioremap() registers properly instead of evily casting register physical addresses to virtual addresses. The memory resource address range has been extracted from the config and data registes lists in the sh-pfc driver. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-03-15sh: sh7786: Add pin control resourcesLaurent Pinchart
Add memory resources for the pin control platform device to let the sh-pfc driver ioremap() registers properly instead of evily casting register physical addresses to virtual addresses. The memory resource address range has been extracted from the config and data registes lists in the sh-pfc driver. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-03-15sh: sh7785: Add pin control resourcesLaurent Pinchart
Add memory resources for the pin control platform device to let the sh-pfc driver ioremap() registers properly instead of evily casting register physical addresses to virtual addresses. The memory resource address range has been extracted from the config and data registes lists in the sh-pfc driver. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-03-15sh: sh7757: Add pin control resourcesLaurent Pinchart
Add memory resources for the pin control platform device to let the sh-pfc driver ioremap() registers properly instead of evily casting register physical addresses to virtual addresses. The memory resource address range has been extracted from the config and data registes lists in the sh-pfc driver. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-03-15sh: sh7724: Add pin control resourcesLaurent Pinchart
Add memory resources for the pin control platform device to let the sh-pfc driver ioremap() registers properly instead of evily casting register physical addresses to virtual addresses. The memory resource address range has been extracted from the config and data registes lists in the sh-pfc driver. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-03-15sh: sh7723: Add pin control resourcesLaurent Pinchart
Add memory resources for the pin control platform device to let the sh-pfc driver ioremap() registers properly instead of evily casting register physical addresses to virtual addresses. The memory resource address range has been extracted from the config and data registes lists in the sh-pfc driver. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-03-15sh: sh7722: Add pin control resourcesLaurent Pinchart
Add memory resources for the pin control platform device to let the sh-pfc driver ioremap() registers properly instead of evily casting register physical addresses to virtual addresses. The memory resource address range has been extracted from the config and data registes lists in the sh-pfc driver. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-01-25sh: shx3: pinmux: Use driver-provided pinmux infoLaurent Pinchart
Pinmux info for the sh machines is now provided by pinmux drivers. Remove the duplicate copy in arch code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25sh: sh7786: pinmux: Use driver-provided pinmux infoLaurent Pinchart
Pinmux info for the sh machines is now provided by pinmux drivers. Remove the duplicate copy in arch code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25sh: sh7785: pinmux: Use driver-provided pinmux infoLaurent Pinchart
Pinmux info for the sh machines is now provided by pinmux drivers. Remove the duplicate copy in arch code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25sh: sh7757: pinmux: Use driver-provided pinmux infoLaurent Pinchart
Pinmux info for the sh machines is now provided by pinmux drivers. Remove the duplicate copy in arch code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25sh: sh7734: pinmux: Use driver-provided pinmux infoLaurent Pinchart
Pinmux info for the sh machines is now provided by pinmux drivers. Remove the duplicate copy in arch code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25sh: sh7724: pinmux: Use driver-provided pinmux infoLaurent Pinchart
Pinmux info for the sh machines is now provided by pinmux drivers. Remove the duplicate copy in arch code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25sh: sh7723: pinmux: Use driver-provided pinmux infoLaurent Pinchart
Pinmux info for the sh machines is now provided by pinmux drivers. Remove the duplicate copy in arch code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25sh: sh7722: pinmux: Use driver-provided pinmux infoLaurent Pinchart
Pinmux info for the sh machines is now provided by pinmux drivers. Remove the duplicate copy in arch code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25sh: shx3: Register PFC platform deviceLaurent Pinchart
Add arch code to register the PFC platform device instead of calling the driver directly. Platform device registration in the sh-pfc driver will be removed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25sh: sh7786: Register PFC platform deviceLaurent Pinchart
Add arch code to register the PFC platform device instead of calling the driver directly. Platform device registration in the sh-pfc driver will be removed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25sh: sh7785: Register PFC platform deviceLaurent Pinchart
Add arch code to register the PFC platform device instead of calling the driver directly. Platform device registration in the sh-pfc driver will be removed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25sh: sh7757: Register PFC platform deviceLaurent Pinchart
Add arch code to register the PFC platform device instead of calling the driver directly. Platform device registration in the sh-pfc driver will be removed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25sh: sh7734: Register PFC platform deviceLaurent Pinchart
Add arch code to register the PFC platform device instead of calling the driver directly. Platform device registration in the sh-pfc driver will be removed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25sh: sh7724: Register PFC platform deviceLaurent Pinchart
Add arch code to register the PFC platform device instead of calling the driver directly. Platform device registration in the sh-pfc driver will be removed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25sh: sh7723: Register PFC platform deviceLaurent Pinchart
Add arch code to register the PFC platform device instead of calling the driver directly. Platform device registration in the sh-pfc driver will be removed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25sh: sh7722: Register PFC platform deviceLaurent Pinchart
Add arch code to register the PFC platform device instead of calling the driver directly. Platform device registration in the sh-pfc driver will be removed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25sh: shx3: Fix last GPIO indexLaurent Pinchart
A careless look at the code shows that the last entry in the pinmux_gpios seems to be GPIO_FN_IRQOUT. However, entries are ordered by the GPIO number, as the PINMUX_GPIO macro is expended to an indexed array initializer. The last entry in the array is thus GPIO_FN_STATUS0. Set the pinmux_info last_gpio field accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25sh: sh7786: Fix last GPIO indexLaurent Pinchart
A careless look at the code shows that the last entry in the pinmux_gpios seems to be GPIO_FN_FSE. However, entries are ordered by the GPIO number, as the PINMUX_GPIO macro is expended to an indexed array initializer. The last entry in the array is thus GPIO_FN_IRL4. Set the pinmux_info last_gpio field accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25sh: sh7786: Fix port E, G and J GPIOsLaurent Pinchart
The port E, G and J GPIOs don't match the SoC datasheet (they seem to have been copied from the SH7785). Fix them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25sh: sh7757: Fix GPIO_FN_ET0_MDIO and GPIO_FN_ET1_MDIO GPIO entriesLaurent Pinchart
The GPIO_FN_ET0_MDIO and GPIO_FN_ET1_MDIO GPIO entries incorrectly reference the ET0_MDC_MARK and ET1_MDC_MARK marks instead of the ET0_MDIO_MARK and ET1_MDIO_MARK marks. Fix them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25sh: sh7723: Rename GPIO_FN_SIUOSPD to GPIO_FN_SIUAOSPDLaurent Pinchart
The GPIO was incorrectly named. As it has no user in the whole kernel tree, just rename it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-10-22sh: convert boards to use the OHCI platform driverFlorian Fainelli
This patch makes all SuperH boards using the ohci-sh platform driver to use the ohci-platform driver instead, which is suitable for use by these boards. Signed-off-by: Florian Fainelli <florian@openwrt.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-02sh: explicitly include sh_dma.h in setup-sh7722.cGuennadi Liakhovetski
setup-sh7722.c defines several objects, whose types are defined in sh_dma.h, so, it has to be included explicitly. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-08-01sh: sh7724: fixup renesas_usbhs clock settingsKuninori Morimoto
8cc88a55b03bd4940390125c2521c99368513be5 (sh: sh7724: use runtime PM implementation) broke sh7724 clocks. renesas_usbhs needs HWBLK_USB0/1 clock on sh7724 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-07-26sh: modify the sh_dmae_slave_config for RSPI in setup-sh7757Shimoda, Yoshihiro
Modify the sh7757_dmae1_slave to add paramters of RSPI's slave_id. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-07-24Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine update from Vinod Koul: "This time we have a new dmaengine driver from the tegra folks. Also we have Guennadi's cleanup of sh drivers which incudes a library for sh drivers. And the usual odd fixes in bunch of drivers and some nice cleanup of dw_dmac from Andy." Fix up conflicts in drivers/mmc/host/sh_mmcif.c * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits) dmaengine: Cleanup logging messages mmc: sh_mmcif: switch to the new DMA channel allocation and configuration dma: sh: provide a migration path for slave drivers to stop using .private dma: sh: use an integer slave ID to improve API compatibility dmaengine: shdma: prepare to stop using struct dma_chan::private sh: remove unused DMA device pointer from SIU platform data ASoC: siu: don't use DMA device for channel filtering dmaengine: shdma: (cosmetic) simplify a static function dmaengine: at_hdmac: add a few const qualifiers dw_dmac: use 'u32' for LLI structure members, not dma_addr_t dw_dmac: mark dwc_dump_lli inline dma: mxs-dma: Export missing symbols from mxs-dma.c dma: shdma: convert to the shdma base library ASoC: fsi: prepare for conversion to the shdma base library usb: renesas_usbhs: prepare for conversion to the shdma base library ASoC: siu: prepare for conversion to the shdma base library serial: sh-sci: prepare for conversion to the shdma base library mmc: sh_mobile_sdhi: prepare for conversion to the shdma base library mmc: sh_mmcif: remove unneeded struct sh_mmcif_dma, prepare to shdma conversion dma: shdma: prepare for conversion to the shdma base library ...
2012-07-20sh: remove unused DMA device pointer from SIU platform dataGuennadi Liakhovetski
The SIU ALSA driver is not using the DMA device pointer for DMA channel filtering any more, it can be now removed. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-28sh: Convert sh_clk_mstp32_register to sh_clk_mstp_registerNobuhiro Iwamatsu
sh_clk_mstp32_register is deprecated. This convert to sh_clk_mstp_register. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-22sh: intc: Kill off special reservation interface.Paul Mundt
At present reserving the IRLs in the IRQ bitmap in addition to the dropping of the legacy IRQ pre-allocation prevent IRL IRQs from being allocated for the x3proto board. The only reason to permit reservations was to lock down possible hardware vectors prior to dynamic IRQ scanning, but this doesn't matter much given that the hardware controller configuration is sorted before we get around to doing any dynamic IRQ allocation anyways. Beyond that, all of the tables are __init annotated, so quite a bit more work would need to be done to support reconfiguring things like IRL controllers on the fly, much more than would ever make it worth the hassle. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18Merge branch 'sh/evt2irq-migration' into sh-latestPaul Mundt
Conflicts: arch/sh/kernel/cpu/sh3/setup-sh770x.c arch/sh/kernel/cpu/sh3/setup-sh7710.c arch/sh/kernel/cpu/sh3/setup-sh7720.c arch/sh/kernel/cpu/sh4/setup-sh7750.c arch/sh/kernel/cpu/sh4a/setup-sh7343.c arch/sh/kernel/cpu/sh4a/setup-sh7366.c arch/sh/kernel/cpu/sh4a/setup-sh7722.c arch/sh/kernel/cpu/sh4a/setup-sh7723.c arch/sh/kernel/cpu/sh4a/setup-sh7724.c arch/sh/kernel/cpu/sh4a/setup-sh7757.c arch/sh/kernel/cpu/sh4a/setup-sh7763.c arch/sh/kernel/cpu/sh4a/setup-sh7770.c arch/sh/kernel/cpu/sh4a/setup-sh7785.c arch/sh/kernel/cpu/sh4a/setup-sh7786.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18sh: sh-x3 evt2irq migration.Paul Mundt
Migrate SH-X3 to evt2irq() backed hwirq lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18sh: sh7785 evt2irq migration.Paul Mundt
Migrate SH7785 to evt2irq() backed hwirq lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18sh: sh7780 evt2irq migration.Paul Mundt
Migrate SH7780 to evt2irq() backed hwirq lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18sh: sh7770 evt2irq migration.Paul Mundt
Migrate SH7770 to evt2irq() backed hwirq lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18sh: sh7763 evt2irq migration.Paul Mundt
Migrate SH7763 to evt2irq() backed hwirq lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-04 09:55:31 +0000