aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2012-03-27Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: device tree work" from Arnd Bergmann: "Most of these patches convert code from using static platform data to describing the hardware in the device tree. This is only the first half of the changes for v3.4 because a lot of patches for this topic came in the last week before the merge window. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fix up trivial conflicts in arch/arm/mach-vexpress/{Kconfig,core.h} * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (86 commits) Document: devicetree: add OF documents for arch-mmp ARM: dts: append DTS file of pxa168 ARM: mmp: append OF support on pxa168 ARM: mmp: enable rtc clk in pxa168 i2c: pxa: add OF support serial: pxa: add OF support arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board ARM: OMAP2+: Remove extra ifdefs for board-generic ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selected ASoC: DT: Add digital microphone binding to PAZ00 board. ARM: dt: Add ARM PMU to tegra*.dtsi ARM: at91: at91sam9x5cm/dt: add leds support ARM: at91: usb_a9g20/dt: add gpio-keys support ARM: at91: at91sam9m10g45ek/dt: add gpio-keys support ARM: at91: at91sam9m10g45ek/dt: add leds support ARM: at91: usb_a9g20/dt: add leds support ARM: at91/pio: add new PIO3 features ARM: at91: add sam9_smc.o to at91sam9x5 build ARM: at91/tc/clocksource: Add 32 bit variant to Timer Counter ARM: at91/tc: add device tree support to atmel_tclib ...
2012-03-27Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: driver specific updates" from Arnd Bergmann: "These are all specific to some driver. They are typically the platform side of a change in the drivers directory, such as adding a new driver or extending the interface to the platform. In cases where there is no maintainer for the driver, or the maintainer prefers to have the platform changes in the same branch as the driver changes, the patches to the drivers are included as well. A much smaller set of driver updates that depend on other branches getting merged first will be sent later. The new export of tegra_chip_uid conflicts with other changes in fuse.c. In rtc-sa1100.c, the global removal of IRQF_DISABLED conflicts with the cleanup of the interrupt handling of that driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fixed up aforementioned trivial conflicts. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits) ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci mmc: sdhci-s3c: add platform data for the second capability ARM: SAMSUNG: support the second capability for samsung-soc ARM: EXYNOS: add support DMA for EXYNOS4X12 SoC ARM: EXYNOS: Add apb_pclk clkdev entry for mdma1 ARM: EXYNOS: Enable MDMA driver regulator: Remove bq24022 regulator driver rtc: sa1100: add OF support pxa: magician/hx4700: Convert to gpio-regulator from bq24022 ARM: OMAP3+: SmartReflex: fix error handling ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* API ARM: OMAP3+: SmartReflex: micro-optimization for sanity check ARM: OMAP3+: SmartReflex: misc cleanups ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argument ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata() ARM: OMAP3+: hwmod: add SmartReflex IRQs ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG register ARM: OMAP3+: SmartReflex: Add a shutdown hook ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VP ... Conflicts: arch/arm/mach-tegra/Makefile arch/arm/mach-tegra/fuse.c drivers/rtc/rtc-sa1100.c
2012-03-27Merge tag 'rpmsg' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "remoteproc/rpmsg: new subsystem" from Arnd Bergmann: "This new subsystem provides a common way to talk to secondary processors on an SoC, e.g. a DSP, GPU or service processor, using virtio as the transport. In the long run, it should replace a few dozen vendor specific ways to do the same thing, which all never made it into the upstream kernel. There is a broad agreement that rpmsg is the way to go here and several vendors have started working on replacing their own subsystems. Two branches each add one virtio protocol number. Fortunately the numbers were agreed upon in advance, so there are only context changes. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fixed up trivial protocol number conflict due to the mentioned additions next to each other. * tag 'rpmsg' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits) remoteproc: cleanup resource table parsing paths remoteproc: remove the hardcoded vring alignment remoteproc/omap: remove the mbox_callback limitation remoteproc: remove the single rpmsg vdev limitation remoteproc: safer boot/shutdown order remoteproc: remoteproc_rpmsg -> remoteproc_virtio remoteproc: resource table overhaul rpmsg: fix build warning when dma_addr_t is 64-bit rpmsg: fix published buffer length in rpmsg_recv_done rpmsg: validate incoming message length before propagating rpmsg: fix name service endpoint leak remoteproc/omap: two Kconfig fixes remoteproc: make sure we're parsing a 32bit firmware remoteproc: s/big switch/lookup table/ remoteproc: bail out if firmware has different endianess remoteproc: don't use virtio's weak barriers rpmsg: rename virtqueue_add_buf_gfp to virtqueue_add_buf rpmsg: depend on EXPERIMENTAL remoteproc: depend on EXPERIMENTAL rpmsg: add Kconfig menu ... Conflicts: include/linux/virtio_ids.h
2012-03-27Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: board specific updates" from Arnd Bergmann/Olof Johansson: "These changes are all specific to one board only. We're trying to keep the number of board files low, but generally board level updates are ok on platforms that are working on moving towards DT based probing, which will eventually lead to removing them. The board-ams-delta.c board file gets a conflict between the removal of ams_delta_config and the addition of a lot of other data. The Kconfig file has two changes in the same line, and in exynos, the power domain cleanup conflicts with the addition of the image sensor device. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [olof: Amended a fix for a mismerge to board-omap4panda.c] Signed-off-by: Olof Johansson <olof@lixom.net>" Fixed up some fairly trivial conflicts manually. * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (82 commits) i.MX35-PDK: Add Camera support ARM : mx35: 3ds-board: add framebuffer device pxa/hx4700: Remove pcmcia platform_device structure ARM: pxa/hx4700: Reduce sleep mode battery discharge by 35% ARM: pxa/hx4700: Remove unwanted request for GPIO105 ARM: EXYNOS: support Exynos4210-bus Devfreq driver on Nuri board ARM: EXYNOS: Register JPEG on nuri ARM: EXYNOS: Register JPEG on universal_c210 ARM: S5PV210: Enable JPEG on SMDKV210 ARM: S5PV210: Add JPEG board definition ARM: EXYNOS: Enable JPEG on Origen ARM: EXYNOS: Enable JPEG on SMDKV310 ARM: EXYNOS: Add __init attribute to universal_camera_init() ARM: EXYNOS: Add __init attribute to nuri_camera_init() ARM: S5PV210: Enable FIMC on SMDKC110 ARM: S5PV210: Enable FIMC on SMDKV210 ARM: S5PV210: Enable MFC on SMDKC110 ARM: S5PV210: Enable MFC on SMDKV210 ARM: EXYNOS: Enable G2D on SMDKV310 ARM: tegra: update defconfig ...
2012-03-27Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: SoC specific updates" from Arnd Bergmann: "These changes are all specific to an soc family or the code for one soc. Lots of work for Tegra3 this time, but also a lot of other platforms. There will be another (smaller) set of soc patches later in the merge window for stuff that has dependencies on external trees or that was sent just before the merge window opened. The asoc tree added a few devices to the i.mx platform, which conflict with other devices added in the same place here. The tegra Makefile conflicts between a number of branches, mostly because of changes regarding localtimer.c, which was removed in the end. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fix up some trivial conflicts, including the mentioned Tegra Makefile. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: EXYNOS: fix cycle count for periodic mode of clock event timers ARM: EXYNOS: add support JPEG ARM: EXYNOS: Add DMC1, allow PPMU access for DMC ARM: SAMSUNG: Correct MIPI-CSIS io memory resource definition ARM: SAMSUNG: fix __init attribute on regarding s3c_set_platdata() ARM: SAMSUNG: Add __init attribute to samsung_bl_set() ARM: S5PV210: Add usb otg phy control ARM: S3C64XX: Add usb otg phy control ARM: EXYNOS: Enable l2 configuration through device tree ARM: EXYNOS: remove useless code to save/restore L2 ARM: EXYNOS: save L2 settings during bootup ARM: S5P: add L2 early resume code ARM: EXYNOS: Add support AFTR mode on EXYNOS4210 ARM: mx35: Setup the AIPS registers ARM: mx5: Use common function for configuring AIPS ARM: mx3: Setup AIPS registers ARM: mx3: Let mx31 and mx35 enter in LPM mode in WFI ARM: defconfig: imx_v6_v7: build in REGULATOR_FIXED_VOLTAGE ARM: imx: update imx_v6_v7_defconfig ARM: tegra: Demote EMC clock inconsistency BUG to WARN ...
2012-03-27Merge tag 'timer' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: timer cleanup work" from Arnd Bergmann: "These are split out from the generic soc and driver updates because there was a lot of conflicting work by multiple people. Marc Zyngier worked on simplifying the "localtimer" interfaces, and some of the platforms are touching the same code as they move to device tree based booting. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" * tag 'timer' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (61 commits) ARM: tegra: select USB_ULPI if USB is selected arm/tegra: pcie: fix return value of function ARM: ux500: fix compilation after local timer rework ARM: shmobile: remove additional __io() macro use ARM: local timers: make the runtime registration interface mandatory ARM: local timers: convert MSM to runtime registration interface ARM: local timers: convert exynos to runtime registration interface ARM: smp_twd: remove old local timer interface ARM: imx6q: convert to twd_local_timer_register() interface ARM: highbank: convert to twd_local_timer_register() interface ARM: ux500: convert to twd_local_timer_register() interface ARM: shmobile: convert to twd_local_timer_register() interface ARM: tegra: convert to twd_local_timer_register() interface ARM: plat-versatile: convert to twd_local_timer_register() interface ARM: OMAP4: convert to twd_local_timer_register() interface ARM: smp_twd: add device tree support ARM: smp_twd: add runtime registration support ARM: local timers: introduce a new registration interface ARM: smp_twd: make local_timer_stop a symbol instead of a #define ARM: mach-shmobile: default to no earlytimer ...
2012-03-27Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: global cleanups" from Arnd Bergmann: "Quite a bit of code gets removed, and some stuff moved around, mostly the old samsung s3c24xx stuff. There should be no functional changes in this series otherwise. Some cleanups have dependencies on other arm-soc branches and will be sent in the second round. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fixed up trivial conflicts mainly due to #include's being changes on both sides. * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (121 commits) ep93xx: Remove unnecessary includes of ep93xx-regs.h ep93xx: Move EP93XX_SYSCON defines to SoC private header ep93xx: Move crunch code to mach-ep93xx directory ep93xx: Make syscon access functions private to SoC ep93xx: Configure GPIO ports in core code ep93xx: Move peripheral defines to local SoC header ep93xx: Convert the watchdog driver into a platform device. ep93xx: Use ioremap for backlight driver ep93xx: Move GPIO defines to gpio-ep93xx.h ep93xx: Don't use system controller defines in audio drivers ep93xx: Move PHYS_BASE defines to local SoC header file ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driver ARM: EXYNOS: add clock registers for exynos4x12-cpufreq PM / devfreq: update the name of EXYNOS clock registers that were omitted PM / devfreq: update the name of EXYNOS clock register ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clock ARM: EXYNOS: use static declaration on regarding clock ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs ARM: OMAP2+: Fix build error after merge ARM: S3C24XX: remove call to s3c24xx_setup_clocks ...
2012-03-27Merge tag 'fixes-non-critical' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull "ARM: Non-critical bug fixes" from Ardn Bergmann: "Simple bug fixes that were not considered important enough for inclusion into 3.3. One bug fix was originally intended for 3.3 but accidentally got missed, but is not marked stable because it should only get backported once later fixes also make it into v3.4. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" * tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (66 commits) iomux-mx25.h slew rate adjusted for LCD __LD pins ARM: davinci: DA850: move da850_register_pm to .init.text ARM: davinci: cpufreq: fix compiler warning ARM: OMAP2+: Fix build for omap4 only builds with missing include of linux/bug.h ARM: OMAP2+: Fix section warnings for hsmmc_init_one ARM: OMAP2+: Fix build issues with missing include of linux/bug.h ARM: OMAP2+: gpmc-smsc911x: only register regulator for first instance ARM: OMAP3+: PM: VP: fix integer truncation error ARM: OMAP2+: PM: fix wakeupgen warning when hotplug disabled ARM: OMAP2+: PM: fix section mismatch with omap2_init_processor_devices() ARM: OMAP2: Fix section warning for n8x0 when CONFIG_MMC_OMAP is not set ARM: OMAP2+: Fix omap24xx_io_desc warning if SoC subtypes are not selected ARM: OMAP1: Fix section mismatch for omap1_init_early() ARM: OMAP1: Fix typo in lcd_dma.c ARM: OMAP: mailbox: trivial whitespace fix ARM: OMAP: Remove definition cpu_is_omap4430() ARM: OMAP2+: included some headers twice ARM: OMAP: clock.c: included linux/debugfs.h twice ARM: OMAP: don't build hwspinlock in vain ARM: OMAP2+: ads7846_init: put gpio_pendown into pdata if it's provided ...
2012-03-27Merge tag 'asoc-3.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into next/boards The asoc branch that was already merged into v3.4 contains some board-level changes that conflict with patches we already have here, so pull in that branch to resolve the conflicts. Conflicts: arch/arm/mach-imx/mach-imx27_visstrim_m10.c arch/arm/mach-omap2/board-omap4panda.c Signed-off-by: Arnd Bergmann <arnd@arndb.de> [olof: Amended fix for mismerge as reported by Kevin Hilman] Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-24Merge tag 'stable/for-linus-3.4-tag-two' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull more xen updates from Konrad Rzeszutek Wilk: "One tiny feature that accidentally got lost in the initial git pull: * Add fast-EOI acking of interrupts (clear a bit instead of hypercall) And bug-fixes: * Fix CPU bring-up code missing a call to notify other subsystems. * Fix reading /sys/hypervisor even if PVonHVM drivers are not loaded. * In Xen ACPI processor driver: remove too verbose WARN messages, fix up the Kconfig dependency to be a module by default, and add dependency on CPU_FREQ. * Disable CPU frequency drivers from loading when booting under Xen (as we want the Xen ACPI processor to be used instead). * Cleanups in tmem code." * tag 'stable/for-linus-3.4-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/acpi: Fix Kconfig dependency on CPU_FREQ xen: initialize platform-pci even if xen_emul_unplug=never xen/smp: Fix bringup bug in AP code. xen/acpi: Remove the WARN's as they just create noise. xen/tmem: cleanup xen: support pirq_eoi_map xen/acpi-processor: Do not depend on CPU frequency scaling drivers. xen/cpufreq: Disable the cpu frequency scaling drivers from loading. provide disable_cpufreq() function to disable the API.
2012-03-24Merge tag 'bug-for-3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull <linux/bug.h> cleanup from Paul Gortmaker: "The changes shown here are to unify linux's BUG support under the one <linux/bug.h> file. Due to historical reasons, we have some BUG code in bug.h and some in kernel.h -- i.e. the support for BUILD_BUG in linux/kernel.h predates the addition of linux/bug.h, but old code in kernel.h wasn't moved to bug.h at that time. As a band-aid, kernel.h was including <asm/bug.h> to pseudo link them. This has caused confusion[1] and general yuck/WTF[2] reactions. Here is an example that violates the principle of least surprise: CC lib/string.o lib/string.c: In function 'strlcat': lib/string.c:225:2: error: implicit declaration of function 'BUILD_BUG_ON' make[2]: *** [lib/string.o] Error 1 $ $ grep linux/bug.h lib/string.c #include <linux/bug.h> $ We've included <linux/bug.h> for the BUG infrastructure and yet we still get a compile fail! [We've not kernel.h for BUILD_BUG_ON.] Ugh - very confusing for someone who is new to kernel development. With the above in mind, the goals of this changeset are: 1) find and fix any include/*.h files that were relying on the implicit presence of BUG code. 2) find and fix any C files that were consuming kernel.h and hence relying on implicitly getting some/all BUG code. 3) Move the BUG related code living in kernel.h to <linux/bug.h> 4) remove the asm/bug.h from kernel.h to finally break the chain. During development, the order was more like 3-4, build-test, 1-2. But to ensure that git history for bisect doesn't get needless build failures introduced, the commits have been reorderd to fix the problem areas in advance. [1] https://lkml.org/lkml/2012/1/3/90 [2] https://lkml.org/lkml/2012/1/17/414" Fix up conflicts (new radeon file, reiserfs header cleanups) as per Paul and linux-next. * tag 'bug-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: kernel.h: doesn't explicitly use bug.h, so don't include it. bug: consolidate BUILD_BUG_ON with other bug code BUG: headers with BUG/BUG_ON etc. need linux/bug.h bug.h: add include of it to various implicit C users lib: fix implicit users of kernel.h for TAINT_WARN spinlock: macroize assert_spin_locked to avoid bug.h dependency x86: relocate get/set debugreg fcns to include/asm/debugreg.
2012-03-24Merge tag 'regulator-3.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into next/drivers The pxa regulator branch removes the bq24022 driver, while a lot of other regulator drivers got added in the regulator tree. This resolves the trivial conflicts by merging in the regulator patches that are already merged into v3.4. Conflicts: drivers/regulator/Kconfig drivers/regulator/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-23Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq Pull cpufreq updates for 3.4 from Dave Jones: new drivers and some fixes. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: provide disable_cpufreq() function to disable the API. EXYNOS5250: Add support cpufreq for EXYNOS5250 EXYNOS4X12: Add support cpufreq for EXYNOS4X12 [CPUFREQ] CPUfreq ondemand: update sampling rate without waiting for next sampling [CPUFREQ] Add S3C2416/S3C2450 cpufreq driver [CPUFREQ] Fix exposure of ARM_EXYNOS4210_CPUFREQ [CPUFREQ] EXYNOS4210: update the name of EXYNOS clock register [CPUFREQ] EXYNOS: Initialize locking_frequency with initial frequency [CPUFREQ] s3c64xx: Fix mis-cherry pick of VDDINT Fix up trivial conflicts in Kconfig and Makefile due to just changes next to each other (OMAP2PLUS changes vs some new EXYNOS cpufreq drivers).
2012-03-23Merge branch 'pcmcia' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull #3 ARM updates from Russell King: "This adds gpio support to soc_common, allowing an amount of code to be deleted from each PCMCIA socket driver for the PXA/SA11x0 SoCs." * 'pcmcia' of git://git.linaro.org/people/rmk/linux-arm: PCMCIA: sa1111: rename sa1111 socket drivers to have sa1111_ prefix. PCMCIA: make lubbock socket driver part of sa1111_cs PCMCIA: add Kconfig control for building sa11xx_base.c PCMCIA: sa1111: jornada720: no need to disable IRQs around sa1111_set_io PCMCIA: sa1111: pass along sa1111_pcmcia_configure_socket() failure code PCMCIA: soc_common: remove explicit wrprot initialization in socket drivers PCMCIA: soc_common: remove soc_pcmcia_*_irqs functions PCMCIA: sa11x0: h3600: convert to use new irq/gpio management PCMCIA: sa11x0: simpad: convert to use new irq/gpio management PCMCIA: sa11x0: shannon: convert to use new irq/gpio management PCMCIA: sa11x0: nanoengine: convert reset handling to use GPIO subsystem PCMCIA: sa11x0: nanoengine: convert to use new irq/gpio management PCMCIA: sa11x0: cerf: convert reset handling to use GPIO subsystem PCMCIA: sa11x0: cerf: convert to use new irq/gpio management PCMCIA: sa11x0: assabet: convert to use new irq/gpio management PCMCIA: sa1111: use new per-socket irq/gpio infrastructure PCMCIA: pxa: convert PXA socket drivers to use new irq/gpio management PCMCIA: soc_common: add GPIO support for card status signals PCMCIA: soc_common: move common initialization into soc_common
2012-03-23Merge branch 'amba' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull #2 ARM updates from Russell King: "Further ARM AMBA primecell updates which aren't included directly in the previous commit. I wanted to keep these separate as they're touching stuff outside arch/arm/." * 'amba' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7362/1: AMBA: Add module_amba_driver() helper macro for amba_driver ARM: 7335/1: mach-u300: do away with MMC config files ARM: 7280/1: mmc: mmci: Cache MMCICLOCK and MMCIPOWER register ARM: 7309/1: realview: fix unconnected interrupts on EB11MP ARM: 7230/1: mmc: mmci: Fix PIO read for small SDIO packets ARM: 7227/1: mmc: mmci: Prepare for SDIO before setting up DMA job ARM: 7223/1: mmc: mmci: Fixup use of runtime PM and use autosuspend ARM: 7221/1: mmc: mmci: Change from using legacy suspend ARM: 7219/1: mmc: mmci: Change vdd_handler to a generic ios_handler ARM: 7218/1: mmc: mmci: Provide option to configure bus signal direction ARM: 7217/1: mmc: mmci: Put power register deviations in variant data ARM: 7216/1: mmc: mmci: Do not release spinlock in request_end ARM: 7215/1: mmc: mmci: Increase max_segs from 16 to 128
2012-03-23Merge branch 'for-armsoc' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull #1 ARM updates from Russell King: "This one covers stuff which Arnd is waiting for me to push, as this is shared between both our trees and probably other trees elsewhere. Essentially, this contains: - AMBA primecell device initializer updates - mostly shrinking the size of the device declarations in platform code to something more reasonable. - Getting rid of the NO_IRQ crap from AMBA primecell stuff. - Nicolas' idle cleanups. This in combination with the restart cleanups from the last merge window results in a great many mach/system.h files being deleted." Yay: ~80 files, ~2000 lines deleted. * 'for-armsoc' of git://git.linaro.org/people/rmk/linux-arm: (60 commits) ARM: remove disable_fiq and arch_ret_to_user macros ARM: make entry-macro.S depend on !MULTI_IRQ_HANDLER ARM: rpc: make default fiq handler run-time installed ARM: make arch_ret_to_user macro optional ARM: amba: samsung: use common amba device initializers ARM: amba: spear: use common amba device initializers ARM: amba: nomadik: use common amba device initializers ARM: amba: u300: use common amba device initializers ARM: amba: lpc32xx: use common amba device initializers ARM: amba: netx: use common amba device initializers ARM: amba: bcmring: use common amba device initializers ARM: amba: ep93xx: use common amba device initializers ARM: amba: omap2: use common amba device initializers ARM: amba: integrator: use common amba device initializers ARM: amba: realview: get rid of private platform amba_device initializer ARM: amba: versatile: get rid of private platform amba_device initializer ARM: amba: vexpress: get rid of private platform amba_device initializer ARM: amba: provide common initializers for static amba devices ARM: amba: make use of -1 IRQs warn ARM: amba: u300: get rid of NO_IRQ initializers ...
2012-03-23Merge tag 'for-3.4' of git://openrisc.net/jonas/linuxLinus Torvalds
Pull OpenRISC changes for 3.4 from Jonas Bonn: "This series for the OpenRISC architecture consists of mostly trivial fixups. The most interesting bits of the series are: * A fix to the timer code whereby the shortest trigger period is set to 100 cycles; previously, it was possible to set this to 1 cycle, but by the time the register was written, that time had already passed and the timer interrupt would not go off until the cycle counter had gone a full cycle. * Allowing a device tree binary to be passed in to the kernel from u-boot. The OpenRISC architecture has been recently merged into upstream u-boot, so this change gets OpenRISC Linux into sync with that project." * tag 'for-3.4' of git://openrisc.net/jonas/linux: OpenRISC: Remove memory_start/end prototypes openrisc: remove semicolon from KSTK_ defs openrisc: sanitize use of orig_gpr11 openrisc: fix virt_addr_valid OpenRISC: Export dump_stack() OpenRISC: Select GENERIC_ATOMIC64 openrisc: Set shortest clock event to 100 ticks openrisc: included linux/thread_info.h twice OpenRISC: Use set_current_blocked() and block_sigmask() OpenRISC: Don't mask signals if we fail to setup signal stack OpenRISC: No need to reset handler if SA_ONESHOT OpenRISC: Don't reimplement force_sigsegv() openrisc: enable passing of flattened device tree pointer arch/openrisc/mm/init.c: trivial: use BUG_ON
2012-03-23Merge tag 'ia64-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull miscellaneous Itanium patches from Tony Luck. The conflicts in arch/ia64/hp/sim/simserial.c were due to patches to simserial that had alredy been included (with lots of further cleanups) in the serial tree. * tag 'ia64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: Documentation/kernel-parameters: remove inttest parameter [IA64] Fix ISA IRQ trigger model and polarity setting [IA64] Fix a couple of warnings for EXPORT_SYMBOL [IA64] Check return from device_register() in cx_device_register() [IA64] Fix warning from machine_kexec.c [IA64] simserial, bail out when request_irq fails [IA64] hpsim, initialize chip for assigned irqs [IA64] simserial, include some headers [IA64] hpsim, fix SAL handling in fw-emu [IA64] genirq fixup for SGI/SN [IA64] disable interrupts when exiting from ia64_mca_cmc_int_handler()
2012-03-24Merge branch 'mmci' into ambaRussell King
2012-03-23Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull additional x86 fixes from Peter Anvin: - address a long-standing bug related to when a kernel-spawned process gets a signal on an i386 kernel compiled without CONFIG_VM86. - fix the newly introduced build warning in arch/x86/boot. - fix a typo in the i386 system call table which affects building some libcs. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86-32: Fix endless loop when processing signals for kernel tasks x86, boot: Correct CFLAGS for hostprogs x86-32: Fix typo for mq_getsetattr in syscall table
2012-03-23Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge second batch of patches from Andrew Morton: - various misc things - core kernel changes to prctl, exit, exec, init, etc. - kernel/watchdog.c updates - get_maintainer - MAINTAINERS - the backlight driver queue - core bitops code cleanups - the led driver queue - some core prio_tree work - checkpatch udpates - largeish crc32 update - a new poll() feature for the v4l guys - the rtc driver queue - fatfs - ptrace - signals - kmod/usermodehelper updates - coredump - procfs updates * emailed from Andrew Morton <akpm@linux-foundation.org>: (141 commits) seq_file: add seq_set_overflow(), seq_overflow() proc-ns: use d_set_d_op() API to set dentry ops in proc_ns_instantiate(). procfs: speed up /proc/pid/stat, statm procfs: add num_to_str() to speed up /proc/stat proc: speed up /proc/stat handling fs/proc/kcore.c: make get_sparsemem_vmemmap_info() static coredump: add VM_NODUMP, MADV_NODUMP, MADV_CLEAR_NODUMP coredump: remove VM_ALWAYSDUMP flag kmod: make __request_module() killable kmod: introduce call_modprobe() helper usermodehelper: ____call_usermodehelper() doesn't need do_exit() usermodehelper: kill umh_wait, renumber UMH_* constants usermodehelper: implement UMH_KILLABLE usermodehelper: introduce umh_complete(sub_info) usermodehelper: use UMH_WAIT_PROC consistently signal: zap_pid_ns_processes: s/SEND_SIG_NOINFO/SEND_SIG_FORCED/ signal: oom_kill_task: use SEND_SIG_FORCED instead of force_sig() signal: cosmetic, s/from_ancestor_ns/force/ in prepare_signal() paths signal: give SEND_SIG_FORCED more power to beat SIGNAL_UNKILLABLE Hexagon: use set_current_blocked() and block_sigmask() ...
2012-03-23coredump: add VM_NODUMP, MADV_NODUMP, MADV_CLEAR_NODUMPJason Baron
Since we no longer need the VM_ALWAYSDUMP flag, let's use the freed bit for 'VM_NODUMP' flag. The idea is is to add a new madvise() flag: MADV_DONTDUMP, which can be set by applications to specifically request memory regions which should not dump core. The specific application I have in mind is qemu: we can add a flag there that wouldn't dump all of guest memory when qemu dumps core. This flag might also be useful for security sensitive apps that want to absolutely make sure that parts of memory are not dumped. To clear the flag use: MADV_DODUMP. [akpm@linux-foundation.org: s/MADV_NODUMP/MADV_DONTDUMP/, s/MADV_CLEAR_NODUMP/MADV_DODUMP/, per Roland] [akpm@linux-foundation.org: fix up the architectures which broke] Signed-off-by: Jason Baron <jbaron@redhat.com> Acked-by: Roland McGrath <roland@hack.frob.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Avi Kivity <avi@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23coredump: remove VM_ALWAYSDUMP flagJason Baron
The motivation for this patchset was that I was looking at a way for a qemu-kvm process, to exclude the guest memory from its core dump, which can be quite large. There are already a number of filter flags in /proc/<pid>/coredump_filter, however, these allow one to specify 'types' of kernel memory, not specific address ranges (which is needed in this case). Since there are no more vma flags available, the first patch eliminates the need for the 'VM_ALWAYSDUMP' flag. The flag is used internally by the kernel to mark vdso and vsyscall pages. However, it is simple enough to check if a vma covers a vdso or vsyscall page without the need for this flag. The second patch then replaces the 'VM_ALWAYSDUMP' flag with a new 'VM_NODUMP' flag, which can be set by userspace using new madvise flags: 'MADV_DONTDUMP', and unset via 'MADV_DODUMP'. The core dump filters continue to work the same as before unless 'MADV_DONTDUMP' is set on the region. The qemu code which implements this features is at: http://people.redhat.com/~jbaron/qemu-dump/qemu-dump.patch In my testing the qemu core dump shrunk from 383MB -> 13MB with this patch. I also believe that the 'MADV_DONTDUMP' flag might be useful for security sensitive apps, which might want to select which areas are dumped. This patch: The VM_ALWAYSDUMP flag is currently used by the coredump code to indicate that a vma is part of a vsyscall or vdso section. However, we can determine if a vma is in one these sections by checking it against the gate_vma and checking for a non-NULL return value from arch_vma_name(). Thus, freeing a valuable vma bit. Signed-off-by: Jason Baron <jbaron@redhat.com> Acked-by: Roland McGrath <roland@hack.frob.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23Hexagon: use set_current_blocked() and block_sigmask()Matt Fleming
As described in e6fa16ab9c1e ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0f28f ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23x86: use for_each_clear_bit_from()Akinobu Mita
Use for_each_clear_bit() to iterate over all the cleared bit in a memory region. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23bitops: rename for_each_set_bit_cont() in favor of analogous list.h functionAkinobu Mita
This renames for_each_set_bit_cont() to for_each_set_bit_from() because it is analogous to list_for_each_entry_from() in list.h rather than list_for_each_entry_continue(). This doesn't remove for_each_set_bit_cont() for now. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23Remove remaining bits of io_remap_page_range()Javi Merino
Commit 33bf56106d9b ("feature removal of io_remap_page_range()") removed io_remap_page_range(), but it is still included in some arch header files. It has no in-tree users. Signed-off-by: Javi Merino <javi.merino@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23nmi watchdog: do not use cpp symbol in KconfigCong Wang
ARCH_HAS_NMI_WATCHDOG is a macro defined by arch, but config HARDLOCKUP_DETECTOR depends on it. This is wrong, ARCH_HAS_NMI_WATCHDOG has to be a Kconfig config, and arch's need it should select it explicitly. Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Acked-by: Don Zickus <dzickus@redhat.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: David Howells <dhowells@redhat.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23um: use set_current_blocked() and block_sigmask()Matt Fleming
As described in commit e6fa16ab9c1e ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0f28f ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Richard Weinberger <richard@nod.at> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23um: don't restore current->blocked on errorMatt Fleming
If we fail to setup the signal stack frame then we don't need to restore current->blocked because it is not modified by setup_signal_stack_*. Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Richard Weinberger <richard@nod.at> Tested-by: Richard Weinberger <richard@nod.at> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - V4L2 API additions to better support JPEG compression control - media API additions to properly support MPEG decoders - V4L2 API additions for image crop/scaling - a few other V4L2 API DocBook fixes/improvements - two new DVB frontend drivers: m88rs2000 and rtl2830 - two new DVB drivers: az6007 and rtl28xxu - a framework for ISA drivers, that removed lots of common code found at the ISA radio drivers - a new FM transmitter driver (radio-keene) - a GPIO-based IR receiver driver - a new sensor driver: mt9m032 - some new video drivers: adv7183, blackfin, mx2_emmaprp, sii9234_drv, vs6624 - several new board additions, driver fixes, improvements and cleanups. * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (295 commits) [media] update CARDLIST.em28xx [media] partially reverts changeset fa5527c [media] stb0899: fix the limits for signal strength values [media] em28xx: support for 2304:0242 PCTV QuatroStick (510e) [media] em28xx: support for 2013:0251 PCTV QuatroStick nano (520e) [media] -EINVAL -> -ENOTTY [media] gspca - sn9c20x: Cleanup source [media] gspca - sn9c20x: Simplify register write for capture start/stop [media] gspca - sn9c20x: Add automatic JPEG compression mechanism [media] gspca - sn9c20x: Greater delay in case of sensor no response [media] gspca - sn9c20x: Optimize the code of write sequences [media] gspca - sn9c20x: Add the JPEG compression quality control [media] gspca - sn9c20x: Add a delay after Omnivision sensor reset [media] gspca - sn9c20x: Propagate USB errors to higher level [media] gspca - sn9c20x: Use the new video control mechanism [media] gspca - sn9c20x: Fix loss of frame start [media] gspca - zc3xx: Lack of register 08 value for sensor cs2102k [media] gspca - ov534_9: Add brightness to OmniVision 5621 sensor [media] gspca - zc3xx: Add V4L2_CID_JPEG_COMPRESSION_QUALITY control support [media] pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5 ...
2012-03-23Merge tag 'iommu-updates-v3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "The IOMMU updates for this round are not very large patch-wise. But they contain two new IOMMU drivers for the ARM Tegra 2 and 3 platforms. Besides that there are also a few patches for the AMD IOMMU which prepare the driver for adding intr-remapping support and a couple of fixes." * tag 'iommu-updates-v3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix section mismatch iommu/amd: Move interrupt setup code into seperate function iommu/amd: Make sure IOMMU interrupts are re-enabled on resume iommu/amd: Fix section warning for prealloc_protection_domains iommu/amd: Don't initialize IOMMUv2 resources when not required iommu/amd: Update git-tree in MAINTAINERS iommu/tegra-gart: fix spin_unlock in map failure path iommu/amd: Fix double free of mem-region in error-path iommu/amd: Split amd_iommu_init function ARM: IOMMU: Tegra30: Add iommu_ops for SMMU driver ARM: IOMMU: Tegra20: Add iommu_ops for GART driver
2012-03-23Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci Pull PCI changes (including maintainer change) from Jesse Barnes: "This pull has some good cleanups from Bjorn and Yinghai, as well as some more code from Yinghai to better handle resource re-allocation when enabled. There's also a new initcall_debug feature from Arjan which will print out quirk timing information to help identify slow quirks for fixing or refinement (Yinghai sent in a few patches to do just that once the new debug code landed). Beyond that, I'm handing off PCI maintainership to Bjorn Helgaas. He's been a core PCI and Linux contributor for some time now, and has kindly volunteered to take over. I just don't feel I have the time for PCI review and work that it deserves lately (I've taken on some other projects), and haven't been as responsive lately as I'd like, so I approached Bjorn asking if he'd like to manage things. He's going to give it a try, and I'm confident he'll do at least as well as I have in keeping the tree managed, patches flowing, and keeping things stable." Fix up some fairly trivial conflicts due to other cleanups (mips device resource fixup cleanups clashing with list handling cleanup, ppc iseries removal clashing with pci_probe_only cleanup etc) * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (112 commits) PCI: Bjorn gets PCI hotplug too PCI: hand PCI maintenance over to Bjorn Helgaas unicore32/PCI: move <asm-generic/pci-bridge.h> include to asm/pci.h sparc/PCI: convert devtree and arch-probed bus addresses to resource powerpc/PCI: allow reallocation on PA Semi powerpc/PCI: convert devtree bus addresses to resource powerpc/PCI: compute I/O space bus-to-resource offset consistently arm/PCI: don't export pci_flags PCI: fix bridge I/O window bus-to-resource conversion x86/PCI: add spinlock held check to 'pcibios_fwaddrmap_lookup()' PCI / PCIe: Introduce command line option to disable ARI PCI: make acpihp use __pci_remove_bus_device instead PCI: export __pci_remove_bus_device PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_device PCI: print out PCI device info along with duration PCI: Move "pci reassigndev resource alignment" out of quirks.c PCI: Use class for quirk for usb host controller fixup PCI: Use class for quirk for ti816x class fixup PCI: Use class for quirk for intel e100 interrupt fixup ...
2012-03-23Merge tag 'for_linus-3.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb Pull KGDB/KDB updates from Jason Wessel: "Fixes: - Fix KDB keyboard repeat scan codes and leaked keyboard events - Fix kernel crash with kdb_printf() for users who compile new kdb_printf()'s in early code - Return all segment registers to gdb on x86_64 Features: - KDB/KGDB hook the reboot notifier and end user can control if it stops, detaches or does nothing (updated docs as well) - Notify users who use CONFIG_DEBUG_RODATA to use hw breakpoints" * tag 'for_linus-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb: kdb: Add message about CONFIG_DEBUG_RODATA on failure to install breakpoint kdb: Avoid using dbg_io_ops until it is initialized kgdb,debug_core: add the ability to control the reboot notifier KDB: Fix usability issues relating to the 'enter' key. kgdb,debug-core,gdbstub: Hook the reboot notifier for debugger detach kgdb: Respect that flush op is optional kgdb: x86: Return all segment registers also in 64-bit mode
2012-03-22Merge tag 'fbdev-updates-for-3.4' of git://github.com/schandinat/linux-2.6Linus Torvalds
Pull fbdev updates for 3.4 from Florian Tobias Schandinat: - drivers for Samsung Exynos MIPI DSI and display port - i740fb to support those old Intel chips - large updates to OMAP, viafb and sh_mobile_lcdcfb - some updates to s3c-fb and udlfb, few patches to others Fix up conflicts in drivers/video/udlfb.c due to Key Sievers' fix making it in twice. * tag 'fbdev-updates-for-3.4' of git://github.com/schandinat/linux-2.6: (156 commits) Revert "video:uvesafb: Fix oops that uvesafb try to execute NX-protected page" OMAPDSS: register dss drivers in module init video: pxafb: add clk_prepare/clk_unprepare calls fbdev: bfin_adv7393fb: Drop needless include fbdev: sh_mipi_dsi: add extra phyctrl for sh_mipi_dsi_info fbdev: remove dependency of FB_SH_MOBILE_MERAM from FB_SH_MOBILE_LCDC Revert "MAINTAINERS: add entry for exynos mipi display drivers" fbdev: da8xx: add support for SP10Q010 display fbdev: da8xx:: fix reporting of the display timing info drivers/video/pvr2fb.c: ensure arguments to request_irq and free_irq are compatible OMAPDSS: APPLY: fix clearing shadow dirty flag with manual update fbdev: sh_mobile_meram: Implement system suspend/resume fbdev: sh_mobile_meram: Remove unneeded sanity checks fbdev: sh_mobile_meram: Don't perform update in register operation arm: mach-shmobile: Constify sh_mobile_meram_cfg structures fbdev: sh_mobile_lcdc: Don't store copy of platform data fbdev: sh_mobile_meram: Remove unused sh_mobile_meram_icb_cfg fields arm: mach-shmobile: Don't set MERAM ICB numbers in platform data fbdev: sh_mobile_meram: Allocate ICBs automatically fbdev: sh_mobile_meram: Use genalloc to manage MERAM allocation ...
2012-03-22Merge tag 'pinctrl-for-3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl updates for v3.4 from Linus Walleij (*): - Switches the PXA 168, 910 and MMP over to use pinctrl - Locking revamped - Massive refactorings... - Reform the driver API to use multiple states - Support pin config in the mapping tables - Pinctrl drivers for the nVidia Tegra series - Generic pin config support lib for simple pin controllers - Implement pin config for the U300 * tag 'pinctrl-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits) ARM: u300: configure some pins as an example pinctrl: support pinconfig on the U300 pinctrl/coh901: use generic pinconf enums and parameters pinctrl: introduce generic pin config pinctrl: fix error path in pinconf_map_to_setting() pinctrl: allow concurrent gpio and mux function ownership of pins pinctrl: forward-declare struct device pinctrl: split pincontrol states into its own header pinctrl: include machine header to core.h ARM: tegra: Select PINCTRL Kconfig variables pinctrl: add a driver for NVIDIA Tegra pinctrl: Show selected function and group in pinmux-pins debugfs pinctrl: enhance mapping table to support pin config operations pinctrl: API changes to support multiple states per device pinctrl: add usecount to pins for muxing pinctrl: refactor struct pinctrl handling in core.c vs pinmux.c pinctrl: fix and simplify locking pinctrl: fix the pin descriptor kerneldoc pinctrl: assume map table entries can't have a NULL name field pinctrl: introduce PINCTRL_STATE_DEFAULT, define hogs as that state ... (*) What is it with all these Linuses these days? There's a Linus at google too. Some day I will get myself my own broadsword, and run around screaming "There can be only one". I used to be _special_ dammit. Snif.
2012-03-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "- we finally merged driver for USB version of Synaptics touchpads (I guess most commonly found in IBM/Lenovo keyboard/touchpad combo); - a bunch of new drivers for embedded platforms (Cypress touchscreens, DA9052 OnKey, MAX8997-haptic, Ilitek ILI210x touchscreens, TI touchscreen); - input core allows clients to specify desired clock source for timestamps on input events (EVIOCSCLOCKID ioctl); - input core allows querying state of all MT slots for given event code via EVIOCGMTSLOTS ioctl; - various driver fixes and improvements." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits) Input: ili210x - add support for Ilitek ILI210x based touchscreens Input: altera_ps2 - use of_match_ptr() Input: synaptics_usb - switch to module_usb_driver() Input: convert I2C drivers to use module_i2c_driver() Input: convert SPI drivers to use module_spi_driver() Input: omap4-keypad - move platform_data to <linux/platform_data> Input: kxtj9 - who_am_i check value and initial data rate fixes Input: add driver support for MAX8997-haptic Input: tegra-kbc - revise device tree support Input: of_keymap - add device tree bindings for simple key matrices Input: wacom - fix physical size calculation for 3rd-gen Bamboo Input: twl4030-vibra - really switch from #if to #ifdef Input: hp680_ts_input - ensure arguments to request_irq and free_irq are compatible Input: max8925_onkey - avoid accessing input device too early Input: max8925_onkey - allow to be used as a wakeup source Input: atmel-wm97xx - convert to dev_pm_ops Input: atmel-wm97xx - set driver owner Input: add cyttsp touchscreen maintainer entry Input: cyttsp - remove useless checks in cyttsp_probe() Input: usbtouchscreen - add support for Data Modul EasyTouch TP 72037 ...
2012-03-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto fixes from Herbert Xu: "This fixes a build problem where two crypto modules both try to export the same symbols (which shouldn't have been exported in the first place)." * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: twofish-x86_64-3way - module init/exit functions should be static crypto: camellia-x86_64 - module init/exit functions should be static
2012-03-22Merge tag 'stable/for-linus-3.4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen updates from Konrad Rzeszutek Wilk: "which has three neat features: - PV multiconsole support, so that there can be hvc1, hvc2, etc; This can be used in HVM and in PV mode. - P-state and C-state power management driver that uploads said power management data to the hypervisor. It also inhibits cpufreq scaling drivers to load so that only the hypervisor can make power management decisions - fixing a weird perf bug. There is one thing in the Kconfig that you won't like: "default y if (X86_ACPI_CPUFREQ = y || X86_POWERNOW_K8 = y)" (note, that it all depends on CONFIG_XEN which depends on CONFIG_PARAVIRT which by default is off). I've a fix to convert that boolean expression into "default m" which I am going to post after the cpufreq git pull - as the two patches to make this work depend on a fix in Dave Jones's tree. - Function Level Reset (FLR) support in the Xen PCI backend. Fixes: - Kconfig dependencies for Xen PV keyboard and video - Compile warnings and constify fixes - Change over to use percpu_xxx instead of this_cpu_xxx" Fix up trivial conflicts in drivers/tty/hvc/hvc_xen.c due to changes to a removed commit. * tag 'stable/for-linus-3.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen kconfig: relax INPUT_XEN_KBDDEV_FRONTEND deps xen/acpi-processor: C and P-state driver that uploads said data to hypervisor. xen: constify all instances of "struct attribute_group" xen/xenbus: ignore console/0 hvc_xen: introduce HVC_XEN_FRONTEND hvc_xen: implement multiconsole support hvc_xen: support PV on HVM consoles xenbus: don't free other end details too early xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it. xen/setup/pm/acpi: Remove the call to boot_option_idle_override. xenbus: address compiler warnings xen: use this_cpu_xxx replace percpu_xxx funcs xen/pciback: Support pci_reset_function, aka FLR or D3 support. pci: Introduce __pci_reset_function_locked to be used when holding device_lock. xen: Utilize the restore_msi_irqs hook.
2012-03-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin Pull blackfin updates from Bob Liu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin: (24 commits) blackfin: clean up string bfin_dma_5xx after rename. blackfin:dma: rename bfin_dma_5xx.c to bfin_dma.c bf548: ssm2602: Add ssm2602 platform data into bf548 ezkit board file. Blackfin: s/#if CONFIG/#ifdef CONFIG/ Blackfin: pnav: delete duplicate linux/export.h include bf561: add ppi DLEN macro for 10bits to 16bits arch: blackfin: udpate defconfig Disintegrate asm/system.h for Blackfin [ver #2] arch/blackfin: don't generate random mac in bfin_get_ether_addr() Blackfin: wire up new process_vm syscalls blackfin: cleanup anomaly workarounds blackfin: update default defconfig blackfin: thread_info: add suspend flag bfin: add bfin_ad73311_machine platform device blackfin: bf537: stamp: update board file for 193x blackfin: kgdb: skip hardware watchpoint test bf548: add ppi interrupt mask and blanking clocks blackfin: bf561: forgot CSYNC in get_core_lock_noflush spi/bfin_spi: drop bits_per_word from client data blackfin: cplb-mpu: fix page mask table overflow ...
2012-03-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 patches from Martin Schwidefsky: "The biggest patch is the rework of the smp code, something I wanted to do for some time. There are some patches for our various dump methods and one new thing: z/VM LGR detection. LGR stands for linux-guest- relocation and is the guest migration feature of z/VM. For debugging purposes we keep a log of the systems where a specific guest has lived." Fix up trivial conflict in arch/s390/kernel/smp.c due to the scheduler cleanup having removed some code next to removed s390 code. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: [S390] kernel: Pass correct stack for smp_call_ipl_cpu() [S390] Ensure that vmcore_info pointer is never accessed directly [S390] dasd: prevent validate server for offline devices [S390] Remove monolithic build option for zcrypt driver. [S390] stack dump: fix indentation in output [S390] kernel: Add OS info memory interface [S390] Use block_sigmask() [S390] kernel: Add z/VM LGR detection [S390] irq: external interrupt code passing [S390] irq: set __ARCH_IRQ_EXIT_IRQS_DISABLED [S390] zfcpdump: Implement async sdias event processing [S390] Use copy_to_absolute_zero() instead of "stura/sturg" [S390] rework idle code [S390] rework smp code [S390] rename lowcore field [S390] Fix gcc 4.6.0 compile warning
2012-03-22x86-32: Fix endless loop when processing signals for kernel tasksDmitry Adamushko
The problem occurs on !CONFIG_VM86 kernels [1] when a kernel-mode task returns from a system call with a pending signal. A real-life scenario is a child of 'khelper' returning from a failed kernel_execve() in ____call_usermodehelper() [ kernel/kmod.c ]. kernel_execve() fails due to a pending SIGKILL, which is the result of "kill -9 -1" (at least, busybox's init does it upon reboot). The loop is as follows: * syscall_exit_work: - work_pending: // start_of_the_loop - work_notify_sig: - do_notify_resume() - do_signal() - if (!user_mode(regs)) return; - resume_userspace // TIF_SIGPENDING is still set - work_pending // so we call work_pending => goto // start_of_the_loop More information can be found in another LKML thread: http://www.serverphorums.com/read.php?12,457826 [1] the problem was also seen on MIPS. Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Link: http://lkml.kernel.org/r/1332448765.2299.68.camel@dimm Cc: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-03-22Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm main changes from Dave Airlie: "This is the main drm pull request, I'm probably going to send two more smaller ones, will explain below. This contains a patch that is also in the fbdev tree, but it should be the same patch, it added an API for hot unplugging framebuffer devices, and I need that API for a new driver. It also contains some changes to the i2c tree which Jean has acked, and one change to moorestown platform stuff in x86. Highlights: - new drivers: UDL driver for USB displaylink devices, kms only, should support correct hotplug operations. - core: i2c speedups + better hotplug support, EDID overriding via firmware interface - allows user to load a firmware for a broken monitor/kvm from userspace, it even has documentation for it. - exynos: new HDMI audio + hdmi 1.4 + virtual output driver - gma500: code cleanup - radeon: cleanups, CS optimisations, streamout support and pageflip fix - nouveau: NVD9 displayport support + more reclocking work - i915: re-enabling GMBUS, finish gpu patch (might help hibernation who knows), missed irq fixes, stencil tiling fixes, interlaced support, aliasesd PPGTT support for SNB/IVB, swizzling for SNB/IVB, semaphore fixes As well as the usual bunch of cleanups and fixes all over the place. I've got two things I'd like to merge a bit later: a) AMD support for all their new radeonhd 7000 series GPU and APUs. AMD dropped this a bit late due to insane internal review processes, (please AMD just follow Intel and let open source guys ship stuff early) however I don't want to penalise people who own this hardware (since its been on sale for 3-4 months and GPU hw doesn't exactly have a lifetime in years) and consign them to using closed drivers for longer than necessary. The changes are well contained and just plug into the driver new gpu functionality so they should be fairly regression proof. I just want to give them a bit of a run on the hw AMD kindly sent me. b) drm prime/dma-buf interface code. This is just infrastructure code to expose the dma-buf stuff to drm drivers and to userspace. I'm not planning on pushing any driver support in this cycle (except maybe exynos), but I'd like to get the infrastructure code in so for the next cycle I can start getting the driver support into the individual drivers. We have started driver support for i915, nouveau and udl along with I think exynos and omap in staging. However this code relies on the dma-buf tree being pulled into your tree first since it needs the latest interfaces from that tree. I'll push to get that tree sent asap. (oh and any warnings you see in i915 are gcc's fault from what anyone can see)." Fix up trivial conflicts in arch/x86/platform/mrst/mrst.c due to the new msic_thermal_platform_data() thermal function being added next to the tc35876x_platform_data() i2c device function.. * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (326 commits) drm/i915: use DDC_ADDR instead of hard-coding it drm/radeon: use DDC_ADDR instead of hard-coding it drm: remove unneeded redefinition of DDC_ADDR drm/exynos: added virtual display driver. drm: allow loading an EDID as firmware to override broken monitor drm/exynos: enable hdmi audio feature drm/exynos: add default pixel format for plane drm/exynos: cleanup exynos_hdmi.h drm/exynos: add is_local member in exynos_drm_subdrv struct drm/exynos: add subdrv open/close functions drm/exynos: remove module of exynos drm subdrv drm/exynos: release pending pageflip events when closed drm/exynos: added new funtion to get/put dma address. drm/exynos: update gem and buffer framework. drm/exynos: added mode_fixup feature and code clean. drm/exynos: add HDMI version 1.4 support drm/exynos: remove exynos_mixer.h gma500: Fix mmap frambuffer drm/radeon: Drop radeon_gem_object_(un)pin. drm/radeon: Restrict offset for legacy display engine. ...
2012-03-22kgdb: x86: Return all segment registers also in 64-bit modeJan Kiszka
Even if the content is always 0, gdb expects us to return also ds, es, fs, and gs while in x86-64 mode. Do this to avoid ugly errors on "info registers". [jason.wessel@windriver.com: adjust NUMREGBYTES for two new regs] Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2012-03-22Merge tag 'sound-3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull updates of sound stuff from Takashi Iwai: "Here is the first big update chunk of sound stuff for 3.4-rc1. In the common sound infrastructure, there are a few changes for dynamic PCM support (used in ASoC) and a few clean-ups. Majority of changes are found, as usual, in HD-audio and ASoC. Some highlights of HD-audio changes: - All the long-standing static quirk codes for Realtek codec were finally removed by fixing and extending the Realtek auto-parser. - The mute-LED control is standardized over all HD-audio codec drivers using the extended vmaster hook. - The vmaster slave mixer elements are initialized to 0dB as default so that the user won't be annoyed by the silent output after updates, e.g. due to the additions of new elements. - Other many fix-ups for the misc HD-audio devices. In the ASoC side, this is a very active release, including a quite a few framework enhancements. Some highlights: - Support for widgets not associated with a CODEC, an important part of the dynamic PCM framework. - A library factoring out the common code shared by dmaengine based DMA drivers contributed by Lars-Peter Clausen. This will save a lot of code and make it much easier to deploy enhancements to dmaengine. - Support for binary controls, used for providing runtime configuration of algorithm coefficients. - A new DAPM widget type for regulator supplies allowing drivers for devices that can power down unused supplies while active to do without any per-driver code. - DAPM widgets for DAIs, initially giving a speed boost for playback startup and shutdown and also the basis for CODEC<->CODEC DAI link support. - Support for specifying the number of significant bits on audio interfaces, useful for allowing applications to know how much effort to put into generating data for a larger sample format. - Conversion of the FSI driver used on some SH processors to DMAEngine. - Conversion of EP93xx drivers to DMAEngine. - New CODEC drivers for Maxim MAX9768 and Wolfson Microelectronics WM2200. - Move audmux driver from arc/arm to sound/soc - McBSP move from arch/ to sound/ and updates Also, a few small updates and fixes for other drivers like au88x0, ymfpci, USB 6fire, USB usx2yaudio are included." * tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (446 commits) ASoC: wm8994: Provide VMID mode control and fix default sequence ASoC: wm8994: Add missing break in resume ASoC: wm_hubs: Don't actively manage LINEOUT_VMID_BUF ASoC: pxa-ssp: atomically set stream active masks ASoC: fsl: p1022ds: tell the WM8776 codec driver that it's the master ASoC: Samsung: Added to support mono recording ALSA: hda - Fix build with CONFIG_PM=n ALSA: au88x0 - Avoid possible Oops at unbinding ALSA: usb-audio - Fix build error by consitification of rate list ASoC: core: Fix obscure leak of runtime array ALSA: pcm - Avoid GFP_ATOMIC in snd_pcm_link() ALSA: pcm: Constify the list in snd_pcm_hw_constraint_list ASoC: wm8996: Add 44.1kHz support ALSA: hda - Fix build of patch_sigmatel.c without CONFIG_SND_HDA_POWER_SAVE ASoC: mx27vis-aic32x4: Convert it to platform driver ALSA: hda - fix printing of high HDMI sample rates ALSA: ymfpci - Fix legacy registers on S3/S4 resume ALSA: control - Fixe a trailing white space error ALSA: hda - Add expose_enum_ctl flag to snd_hda_add_vmaster_hook() ALSA: hda - Add "Mute-LED Mode" enum control ...
2012-03-22x86, boot: Correct CFLAGS for hostprogsH. Peter Anvin
This is a partial revert of commit: d40f833 "Restrict CFLAGS for hostprogs" The endian-manipulation macros in tools/include need <linux/types.h>, but the hostprogs in arch/x86/boot need several headers from the kernel build tree, which means we have to add the kernel headers to the include path. This picks up <linux/types.h> from the kernel tree, which gives a warning. Since this use of <linux/types.h> is intentional, add -D__EXPORTED_HEADERS__ to the command line to silence the warning. A better way to fix this would be to always install the exported kernel headers into $(objtree)/usr/include as a standard part of the kernel build, but that is a lot more involved. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1330436245-24875-5-git-send-email-matt@console-pimps.org Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-03-22x86-32: Fix typo for mq_getsetattr in syscall tableThierry Reding
Syscall 282 was mistakenly named mq_getsetaddr instead of mq_getsetattr. When building uClibc against the Linux kernel this would result in a shared library that doesn't provide the mq_getattr() and mq_setattr() functions. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Link: http://lkml.kernel.org/r/1332366608-2695-2-git-send-email-thierry.reding@avionic-design.de Cc: <stable@vger.kernel.org> v3.3 Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-03-22Merge branches 'iommu/fixes', 'arm/tegra' and 'x86/amd' into nextJoerg Roedel
2012-03-22Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 "urgent" leftovers from Ingo Molnar: "Pending x86/urgent bits that were not high prio enough to warrant -rc-less v3.3-final inclusion." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, efi: Fix pointer math issue in handle_ramdisks() x86/ioapic: Add register level checks to detect bogus io-apic entries x86, mce: Fix rcu splat in drain_mce_log_buffer() x86, memblock: Move mem_hole_size() to .init
2012-03-22Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform changes from Ingo Molnar. Removes the Moorestown platform that nobody ever used. * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform: Move APIC ID validity check into platform APIC code x86/olpc/xo15/sci: Enable lid close wakeup control x86/geode/net5501: Add platform driver for Soekris Engineering net5501 x86/geode/alix2: Supplement driver to include GPIO button support x86/mid/powerbtn: Use MSIC read/write instead of ipc_scu x86/mid/thermal: Turn off thermistor x86/mid/thermal: Add msic_thermal alias x86/mid/thermal: Convert to use Intel MSIC API x86/mid/scu_ipc: Remove Moorestown support x86/mid: Kill off Moorestown x86/mrst: Add msic_thermal platform support x86/config: Select MSIC MFD driver on Intel Medfield platform x86/mid: Remove Intel Moorestown x86/mrst: Set ISA bus type for fake MP IRQs x86/ioapic: Use legacy_pic to set correct gsi-irq mapping