aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2013-01-10Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM bugfixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: use dynamic percpu allocations for shared msrs area KVM: PPC: Book3S HV: Fix compilation without CONFIG_PPC_POWERNV powerpc: Corrected include header path in kvm_para.h Add rcu user eqs exception hooks for async page fault
2013-01-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 patches from Martin Schwidefsky: "Add the finit_module system call, fix the irq statistics in /proc/stat, fix a s390dbf lockdep problem, a patch revert for a problem that is not 100% understood yet, and a few patches to fix warnings." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: define read*_relaxed functions s390/topology: export cpu_topology s390/pm: export pm_power_off s390/pci: define isa_dma_bridge_buggy s390/3215: partially revert tty close handling fix s390/irq: count cpu restart events s390/irq: remove split irq fields from /proc/stat s390/irq: enable irq sum accounting for /proc/stat again s390/syscalls: wire up finit_module syscall s390/pci: remove dead code s390/smp: fix section mismatch for smp_add_present_cpu() s390/debug: Fix s390dbf lockdep problem in debug_(un)register_view()
2013-01-09Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King. * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7616/1: cache-l2x0: aurora: Use writel_relaxed instead of writel ARM: 7615/1: cache-l2x0: aurora: Invalidate during clean operation with WT enable ARM: 7614/1: mm: fix wrong branch from Cortex-A9 to PJ4b ARM: 7612/1: imx: Do not select some errata that depends on !ARCH_MULTIPLATFORM ARM: 7611/1: VIC: fix bug in VIC irqdomain code ARM: 7610/1: versatile: bump IRQ numbers ARM: 7609/1: disable errata work-arounds which access secure registers ARM: 7608/1: l2x0: Only set .set_debug on PL310 r3p0 and earlier
2013-01-08Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC fixes from Olof Johansson: "People are back from the holiday breaks, and it shows. Here are a bunch of fixes for a number of platforms: - A couple of small fixes for Nomadik - A larger set of changes for kirkwood/mvebu - uart driver selection, dt clocks, gpio-poweroff fixups, a few __init annotation fixes and some error handling improvement in their xor dma driver. - i.MX had a couple of minor fixes (and a critical one for flexcan2 clock setup) - MXS has a small board fix and a framebuffer bugfix - A set of fixes for Samsung Exynos, fixing default bootargs and some Exynos5440 clock issues - A set of OMAP changes including PM fixes and a few sparse warning fixups All in all a bit more positive code delta than we'd ideally want to see here, mostly from the OMAP PM changes, but nothing overly crazy." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) ARM: clps711x: Fix bad merge of clockevents setup ARM: highbank: save and restore L2 cache and GIC on suspend ARM: highbank: add a power request clear ARM: highbank: fix secondary boot and hotplug ARM: highbank: fix typos with hignbank in power request functions ARM: dts: fix highbank cpu mpidr values ARM: dts: add device_type prop to cpu nodes on Calxeda platforms ARM: mx5: Fix MX53 flexcan2 clock ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array pinctrl: mvebu: make pdma clock on dove mandatory ARM: Dove: Add pinctrl clock to DT dma: mv_xor: fix error handling for clocks dma: mv_xor: fix error handling of mv_xor_channel_add() arm: mvebu: Add missing ; for cpu node. arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces arm: mvebu: Armada XP MV78230 has two cores, not one clk: mvebu: Remove inappropriate __init tagging ARM: Kirkwood: Use fixed-regulator instead of board gpio call ARM: Kirkwood: Fix missing sdio clock ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers ...
2013-01-08Merge tag 'omap-for-v3.8-rc2/fixes-signed-v2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: The biggest change is a fix to deal with different power state on omap2 registers that causes issues trying to use common PM code. Also fix few incorrect registers, and an issue for omap1 USB, and few sparse fixes for issues that sneaked in with all the clean-up. * tag 'omap-for-v3.8-rc2/fixes-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array ARM: OMAP1: fix USB configuration use-after-release ARM: OMAP2/3: PRM: fix bogus OMAP2xxx powerstate return values ARM: OMAP3: clock data: Add missing enable/disable for EMU clock ARM: OMAP4: PRM: Correct wrong instance usage for reading reset sources ARM: OMAP4: PRM: fix RSTTIME and RSTST offsets ARM: OMAP4: PRM: Correct reset source map ARM: OMAP: SRAM: resolve sparse warnings ARM: OMAP AM33xx: hwmod data: resolve sparse warnings ARM: OMAP: 32k counter: resolve sparse warnings Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-08Merge branch 'v3.8-samsung-fixes-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim: Most of them are EXYNOS5440 fixes which are for changing uart console, cpu id (typo) and silent complaining gpio error in kernel boot. * 'v3.8-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: skip the clock initialization for exynos5440 ARM: EXYNOS: enable PINCTRL for EXYNOS5440 ARM: dts: use uart port1 for console on exynos4210-smdkv310 ARM: dts: use uart port0 for console on exynos5440-ssdk5440 ARM: SAMSUNG: fix the cpu id for EXYNOS5440 ARM: EXYNOS: Revise HDMI resource size
2013-01-08Merge tag 'mxs-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson
into fixes From Shawn Guo: I have to send one critical mxsfb fix through arm-soc, as FB maintainer is unresponsive for quite a while. People start complaining the missing of such an important fix. * tag 'mxs-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6: video: mxsfb: fix crash when unblanking the display ARM: dts: imx23-olinuxino: Fix IOMUX settings
2013-01-08Merge tag 'imx-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson
into fixes From Shawn Guo: It includes one critical fix - wrong flexcan2 clock will hang system when the port gets brought up. The other two are non-critical fixes, which are sent together here, since it's still early -rc stage. * tag 'imx-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mx5: Fix MX53 flexcan2 clock ARM: dts: imx31-bug: Fix manufacturer compatible string clk: imx: Remove 'clock-output-names' from the examples
2013-01-08KVM: x86: use dynamic percpu allocations for shared msrs areaMarcelo Tosatti
Use dynamic percpu allocations for the shared msrs structure, to avoid using the limited reserved percpu space. Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-08s390/pci: define read*_relaxed functionsHeiko Carstens
Just map the read*_relaxed() functions to their corresponding read*() functions. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-01-08s390/topology: export cpu_topologyHeiko Carstens
Export cpu_topology symbol, so it's available for modules. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-01-08s390/pm: export pm_power_offHeiko Carstens
Export pm_power_off symbol. Needed by at least one of the new device drivers that come with CONFIG_PCI. And all other architectures export that symbol as well. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-01-08s390/pci: define isa_dma_bridge_buggyHeiko Carstens
Define isa_dma_bridge_buggy. Needed to make pci quirks compile: drivers/pci/quirks.c: In function ‘quirk_isa_dma_hangs’: drivers/pci/quirks.c:88:7: error: ‘isa_dma_bridge_buggy’ undeclared (first use in this function) Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-01-08s390/irq: count cpu restart eventsHeiko Carstens
Count CPU Restart events and make them visible via /proc/interrupts. Every CPU hotplug (online) event will increase the per cpu counter. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-01-08s390/irq: remove split irq fields from /proc/statHeiko Carstens
Now that irq sum accounting for /proc/stat's "intr" line works again we have the oddity that the sum field (first field) contains only the sum of the second (external irqs) and third field (I/O interrupts). The reason for that is that these two fields are already sums of all other fields. So if we would sum up everything we would count every interrupt twice. This is broken since the split interrupt accounting was merged two years ago: 052ff461c8427629aee887ccc27478fc7373237c "[S390] irq: have detailed statistics for interrupt types". To fix this remove the split interrupt fields from /proc/stat's "intr" line again and only have them in /proc/interrupts. This restores the old behaviour, seems to be the only sane fix and mimics a behaviour from other architectures where /proc/interrupts also contains more than /proc/stat's "intr" line does. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-01-08s390/irq: enable irq sum accounting for /proc/stat againHeiko Carstens
For more than two years, since f2c66cd8eeddedb440f33bc0f5cec1ed7ae376cb "/proc/stat: scalability of irq num per cpu" the output of /proc/stat is broken. The first field in the "intr" line should contain the sum of all interrupts, however since the above mentioned change it is always zero. The reason for that is that a per cpu irq sum variable had been introduced which got incremented when calling kstat_incr_irqs_this_cpu(). However on s390 we directly incremented only the per cpu per irq counter by accessing the array element via kstat_cpu(smp_processor_id()).irqs[...]. So fix this and use the kstat_incr_irqs_this_cpu() wrapper which increments both: the per cpu per irq counter and the per cpu irq sum counter. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-01-08s390/syscalls: wire up finit_module syscallHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2013-01-08s390/pci: remove dead codeHeiko Carstens
Get rid of these: arch/s390/pci/pci_dma.c:16:29: warning: ‘zpci_ioat_dt’ defined but not used [-Wunused-variable] arch/s390/pci/pci.c:164:12: warning: ‘zpci_store_fib’ defined but not used [-Wunused-function] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-01-08s390/smp: fix section mismatch for smp_add_present_cpu()Heiko Carstens
Fixes this section mismatch: WARNING: vmlinux.o(.text+0x145e4): Section mismatch in reference from the function smp_add_present_cpu() to the function .cpuinit.text:register_cpu() The function smp_add_present_cpu() references the function __cpuinit register_cpu(). This is often because smp_add_present_cpu lacks a __cpuinit annotation or the annotation of register_cpu is wrong. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-01-08s390/debug: Fix s390dbf lockdep problem in debug_(un)register_view()Michael Holzheu
The debug_register/unregister_view() functions call debugfs_remove() while holding the debug_info spinlock. Because debugfs_remove() takes a mutex and therefore can sleep this is not allowed. To fix the problem we give up the debug_info lock before calling debugfs_remove(). The following shows the lockdep message: [ INFO: possible circular locking dependency detected ] ------------------------------------------------------- rmmod/4379 is trying to acquire lock: (&sb->s_type->i_mutex_key#2){+.+.+.}, at: [<00000000003acae2>] debugfs_remove+0x5e/0xa but task is already holding lock: (&(&rc->lock)->rlock){-.-...}, at: [<000000000010a5ae>] debug_unregister_view+0x3a/0xd which lock already depends on the new lock. -> #0 (&sb->s_type->i_mutex_key#2){+.+.+.}: [<00000000001b1644>] validate_chain+0x880/0x1154 [<00000000001b4d6c>] __lock_acquire+0x414/0xc44 [<00000000001b5c16>] lock_acquire+0xbe/0x178 [<0000000000614016>] mutex_lock_nested+0x66/0x36c [<00000000003acae2>] debugfs_remove+0x5e/0xac [<000000000010a620>] debug_unregister_view+0xac/0xd0 [<000003ff8002f140>] qeth_core_exit+0x48/0xf08 [qeth] [<00000000001c35a4>] SyS_delete_module+0x1a4/0x260 [<0000000000618134>] sysc_noemu+0x22/0x28 [<000003fffd4704da>] 0x3fffd4704da Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-01-07Merge tag 'mvebu_fixes_for_v3.8' of ↵Olof Johansson
git://git.infradead.org/users/jcooper/linux into fixes From Jason Cooper: fixes for mvebu/kirkwood v3.8 - use correct uart driver for mvebu boards - add a missing DT clocks - gpio-poweroff level vs. edge triggering, use gpio_is_valid() - remove an inappropriate __init, modules need to access function. - various DT fixes - error handling in mv_xor * tag 'mvebu_fixes_for_v3.8' of git://git.infradead.org/users/jcooper/linux: pinctrl: mvebu: make pdma clock on dove mandatory ARM: Dove: Add pinctrl clock to DT dma: mv_xor: fix error handling for clocks dma: mv_xor: fix error handling of mv_xor_channel_add() arm: mvebu: Add missing ; for cpu node. arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces arm: mvebu: Armada XP MV78230 has two cores, not one clk: mvebu: Remove inappropriate __init tagging ARM: Kirkwood: Use fixed-regulator instead of board gpio call ARM: Kirkwood: Fix missing sdio clock ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers Power: gpio-poweroff: Fix documentation and gpio_is_valid ARM: Kirkwood: Fix missing clk for USB device. arm: mvebu: Use dw-apb-uart instead of ns16650 as UART driver Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-07ARM: clps711x: Fix bad merge of clockevents setupOlof Johansson
I mismerged a previous branch from Alexander, and accidentally left in ARCH_USES_GETTIMEOFFSET. Remove it. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Alexander Shiyan <shc_work@mail.ru>
2013-01-07Merge tag 'nomadik-fixes-for-arm-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into fixes From Linus Walleij: Two fixes to the Nomadik: - Delete a dangling include - Bump IRQ numbers to offset at 32 * tag 'nomadik-fixes-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: nomadik: bump the IRQ numbers again ARM: nomadik: delete dangling include
2013-01-07ARM: highbank: save and restore L2 cache and GIC on suspendRob Herring
This fixes suspend to RAM adding necessary save and restore of L2 and GIC. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-07ARM: highbank: add a power request clearRob Herring
When we fail to power down, we need to clear out the power request. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-07ARM: highbank: fix secondary boot and hotplugRob Herring
With commit 384a290 (ARM: gic: use a private mapping for CPU target interfaces), wake-up IPIs now go to all cores as the gic cpu interface numbering may not follow core numbering. This broke secondary boot on highbank since the boot address was already set for all secondary cores, this caused all cores to boot before the kernel was ready. Fix this by moving the setting of the jump address to highbank_boot_secondary instead of highbank_smp_prepare_cpus and highbank_cpu_die. Also, clear the address when we boot. This prevents cores from booting before they are actually triggered and is also necessary to get suspend/resume to work. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-07ARM: highbank: fix typos with hignbank in power request functionsRob Herring
s/hignbank/highbank/ Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-07ARM: dts: fix highbank cpu mpidr valuesRob Herring
With the addition of commit a0ae0240 (ARM: kernel: add device tree init map function), the cpu reg values must match the cpu mpidr register or we'll get warnings. For some reason, the CLUSTERID on highbank is 9, so the reg value needs to be 0x90n to quiet the warnings. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-07ARM: dts: add device_type prop to cpu nodes on Calxeda platformsRob Herring
While device_type is considered deprecated, it is still needed for tools like lshw to identify cpu nodes. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-08ARM: mx5: Fix MX53 flexcan2 clockMarek Vasut
The second FlexCAN port uses different clock than the first one, configure correct clock to prevent hanging of the system during bringing up of the port. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-07ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs arrayPantelis Antoniou
The IRQ array must be terminated by -1 and not by -1+OMAP_INTC_START This led to having a resource list of 100s of IRQs. Looks like this was caused by commit a2cfc509 (ARM: OMAP3+: hwmod: Add AM33XX HWMOD data) that probably had some search and replace updates done for the patch for sparse irq support. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Acked-by: Paul Walmsley <paul@pwsan.com> [tony@atomide.com: updated wit information about the breaking commit] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-07ARM: Dove: Add pinctrl clock to DTSebastian Hesselbarth
During merge of the mvebu patches a clock gate for pinctrl was lost. This patch just readds the clock gate. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-07Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "Various fixes across the tree. The modpost error due to virt_addr_valid() not being usable from modules required a number of preparatory cleanups so a clean fix was possible." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: 64-bit: Fix build if !CONFIG_MODULES MIPS: Wire up finit_module syscall. MIPS: Fix modpost error in modules attepting to use virt_addr_valid(). MIPS: page.h: Remove now unnecessary #ifndef __ASSEMBLY__ wrapper. MIPS: Switch remaining assembler PAGE_SIZE users to <asm/asm-offsets.h>. MIPS: Include PAGE_S{IZE,HIFT} in <asm/offset.h>. MIPS: Don't include <asm/page.h> unnecessarily. MIPS: Fix comment. Revert "MIPS: Optimise TLB handlers for MIPS32/64 R2 cores." MIPS: perf: Fix build failure in XLP perf support. MIPS: Alchemy: Make 32kHz and r4k timer coexist peacefully
2013-01-07Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
Pull microblaze update from Michal Simek: "This fixes noMMU kernel and I have also added defconfig updates which fix issue with one external dependency and enable all xilinx device drivers for 0-day testing system. Additionally wire up finit_module system call, and do highmem fixup and pci warnings reported by the 0-day testing system" * 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Update microblaze defconfigs microblaze: Fix pci compilation and sparse warnings microblaze: Add finit_module syscall microblaze: Kill __kmap_atomic() microblaze: Change section flags for noMMU microblaze: Microblaze wants sys_fork for noMMU too
2013-01-07ARM: 7616/1: cache-l2x0: aurora: Use writel_relaxed instead of writelGregory CLEMENT
The use of writel instead of writel_relaxed lead to deadlock in some situation (SMP on Armada 370 for instance). The use of writel_relaxed as it was done in the rest of this driver fixes this bug. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-07ARM: 7615/1: cache-l2x0: aurora: Invalidate during clean operation with WT ↵Gregory CLEMENT
enable This patch fixes a bug for Aurora L2 cache controller when the write-through mode is enable. For the clean operation even if we don't have to flush the lines we still need to invalidate them. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-06ARM: 7614/1: mm: fix wrong branch from Cortex-A9 to PJ4bHaojian Zhuang
If CONFIG_ARCH_MULTIPLATFORM & CONFIG_ARCH_MVEBU are both enabled, __v7_pj4b_setup is added between __v7_ca9mp_setup and __v7_setup. But there's no jump instruction added. If the chip is Cortex A5/A9, it goes through __v7_pj4b_setup also. It results in system hang. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-06ARM: 7612/1: imx: Do not select some errata that depends on !ARCH_MULTIPLATFORMFabio Estevam
Since commit 62e4d357a (ARM: 7609/1: disable errata work-arounds which access secure registers) ARM_ERRATA_743622/751472 depends on !ARCH_MULTIPLATFORM. Since imx has been converted to multiplatform, the following warning happens: $ make imx_v6_v7_defconfig warning: (SOC_IMX6Q && ARCH_TEGRA_2x_SOC && ARCH_TEGRA_3x_SOC) selects ARM_ERRATA_751472 which has unmet direct dependencies (CPU_V7 && !ARCH_MULTIPLATFORM) warning: (SOC_IMX6Q && ARCH_TEGRA_3x_SOC) selects ARM_ERRATA_743622 which has unmet direct dependencies (CPU_V7 && !ARCH_MULTIPLATFORM) warning: (SOC_IMX6Q && ARCH_TEGRA_3x_SOC) selects ARM_ERRATA_743622 which has unmet direct dependencies (CPU_V7 && !ARCH_MULTIPLATFORM) warning: (SOC_IMX6Q && ARCH_TEGRA_2x_SOC && ARCH_TEGRA_3x_SOC) selects ARM_ERRATA_751472 which has unmet direct dependencies (CPU_V7 && !ARCH_MULTIPLATFORM) Recommended approach is to remove ARM_ERRATA_743622/751472 from being selected by SOC_IMX6Q and apply such workarounds into the bootloader. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-06arm: mvebu: Add missing ; for cpu node.Andrew Lunn
The Armada XP MV78230 DT include file is missing a ; at the end of the cpu node. Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06arm: mvebu: Armada XP MV78230 has only three Ethernet interfacesThomas Petazzoni
We originally thought that the MV78230 variant of the Armada XP had four Ethernet interfaces, like the other variants MV78260 and MV78460. In fact, this is not true, and the MV78230 has only three Ethernet interfaces. So, the definitions of the Ethernet interfaces is now done as follows: * armada-370-xp.dtsi: definitions of the first two interfaces, that are common to Armada 370 and Armada XP * armada-xp.dtsi: definition of the third interface, common to all Armada XP variants. * armada-xp-mv78260.dtsi and armada-xp-mv78460.dtsi: definition of the fourth interface. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06arm: mvebu: Armada XP MV78230 has two cores, not oneThomas Petazzoni
Contrary to our understanding at the time armada-xp-mv78230.dtsi was written, the MV78230 variant of the Armada XP SoC has two cores and not one. This patch updates the .dtsi file to take into account this reality. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06ARM: Kirkwood: Use fixed-regulator instead of board gpio callAndrew Lunn
With the change to a DT based pinctrl/gpio driver, using gpio API calls in board-*.c files no longer works, a dereferenced NULL pointer exception occurs instead. By converting the GPIO code into a fixed-regulator which gets probed later once pinctrl/gpio is available, we avoid the exception. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Stefan Peter <s.peter@mplch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06ARM: Kirkwood: Fix missing sdio clockAndrew Lunn
We moved to declaring clk gates in DT. However, device which do not yet have a DT binding need to have a clkdev alias. This was missing for SDIO. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Stefan Peter <s.peter@mplch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providersNobuhiro Iwamatsu
Clock Management of kirkwood has moved to DT clock providers. However, TWSI1 has not yet been done. This switches TWSI1 of 88f6282 to DT clock providers. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06ARM: Kirkwood: Fix missing clk for USB device.Andrew Lunn
Without the clock being held by a driver, it gets turned off at a bad time causing the SoC to lockup. This is often during reboot. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Stefan Peter <s.peter@mpl.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06arm: mvebu: Use dw-apb-uart instead of ns16650 as UART driverGregory CLEMENT
The UART controller used in the Armada 370 and Armada XP SoCs is the Synopsys DesignWare 8250 (aka Synopsys DesignWare ABP UART). The improper use of the ns16550 can lead to a kernel oops during boot if a character is sent to the UART before the initialization of the driver. The DW APB has an extra interrupt that gets raised when writing to the LCR when busy. This explains why we need to use dw-apb-uart driver to handle this. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-06Merge commit 'origin/master' into kvm-ppc-3.8Alexander Graf
2013-01-06KVM: PPC: Book3S HV: Fix compilation without CONFIG_PPC_POWERNVAndreas Schwab
Fixes this build breakage: arch/powerpc/kvm/book3s_hv_ras.c: In function ‘kvmppc_realmode_mc_power7’: arch/powerpc/kvm/book3s_hv_ras.c:126:23: error: ‘struct paca_struct’ has no member named ‘opal_mc_evt’ Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-05ARM: EXYNOS: skip the clock initialization for exynos5440Kukjin Kim
Since exynos5440 can support only common clk stuff, so this patch skips legacy exynos5 clock initialization. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-04Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull ARM64 fixes from Catalin Marinas: - Missing include in asm/compat.h. - Kconfig updates. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: Always select ARM_AMBA and GENERIC_GPIO arm64: Keep the ARM64 Kconfig selects sorted arm64: Include linux/ptrace.h in asm/compat.h
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-13 05:38:56 +0000