aboutsummaryrefslogtreecommitdiff
path: root/drivers/acpi/wakeup.c
AgeCommit message (Collapse)Author
2011-02-12ACPI / Wakeup: Enable button GPEs unconditionally during initializationRafael J. Wysocki
Commit 9630bdd (ACPI: Use GPE reference counting to support shared GPEs) introduced a suspend regression where boxes resume immediately after being suspended due to the lid or sleep button wakeup status not being cleared properly. This happens if the GPEs corresponding to those devices are not enabled all the time, which apparently is expected by some BIOSes. To fix this problem, enable button and lid GPEs unconditionally during initialization and keep them enabled all the time, regardless of whether or not the ACPI button driver is used. References: https://bugzilla.kernel.org/show_bug.cgi?id=27372 Reported-and-tested-by: Ferenc Wágner <wferi@niif.hu> Cc: stable@kernel.org Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-01-12Merge branch 'wakeup-etc-rafael' into releaseLen Brown
2011-01-12ACPICA: Rename some function and variable namesLin Ming
Some function and variable names are renamed to be consistent with ACPICA code base. acpi_raw_enable_gpe -> acpi_ev_add_gpe_reference acpi_raw_disable_gpe -> acpi_ev_remove_gpe_reference acpi_gpe_can_wake -> acpi_setup_gpe_for_wake acpi_gpe_wakeup -> acpi_set_gpe_wake_mask acpi_update_gpes -> acpi_update_all_gpes acpi_all_gpes_initialized -> acpi_gbl_all_gpes_initialized acpi_handler_info -> acpi_gpe_handler_info ... Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-07ACPI / PM: Use device wakeup flags for handling ACPI wakeup devicesRafael J. Wysocki
There are ACPI devices (buttons and the laptop lid) that can wake up the system from sleep states and have no "physical" companion devices. The ACPI subsystem uses two flags, wakeup.state.enabled and wakeup.flags.always_enabled, for handling those devices, but they are not accessible through the standard device wakeup infrastructure. User space can only control them via the /proc/acpi/wakeup interface that is not really convenient (e.g. the way in which devices are enabled to wake up the system is not portable between different systems, because it requires one to know the devices' "names" used in the system's ACPI tables). To address this problem, use standard device wakeup flags instead of the special ACPI flags for handling those devices. In particular, use device_set_wakeup_capable() to mark the ACPI wakeup devices during initialization and use device_set_wakeup_enable() to allow or disallow them to wake up the system from sleep states. Rework the /proc/acpi/wakeup interface to take these changes into account. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15Merge branch 'acpica-gpe' into releaseLen Brown
2010-07-06ACPICA: Introduce acpi_gpe_wakeup()Rafael J. Wysocki
ACPICA uses reference counters to avoid disabling GPEs too early in case they have been enabled for many times. This is done separately for runtime and for wakeup, but the wakeup GPE reference counter is not really necessary, because GPEs are only enabled to wake up the system at the hardware level by acpi_enter_sleep_state(). Thus it only is necessary to set the corresponding bits in the wakeup enable masks of these GPEs' registers right before the system enters a sleep state. Moreover, the GPE wakeup enable bits can only be set when the target sleep state of the system is known and they need to be cleared immediately after wakeup regardless of how many wakeup devices are associated with a given GPE. On the basis of the above observations, introduce function acpi_gpe_wakeup() to be used for setting or clearing the enable bit corresponding to a given GPE in its enable register's enable_for_wake mask. Modify the ACPI suspend and wakeup code the use acpi_gpe_wakeup() instead of acpi_{enable|disable}_gpe() to set and clear GPE enable bits in their registers' enable_for_wake masks during system transitions to a sleep state and back to the working state, respectively. [This will allow us to drop the third argument of acpi_{enable|disable}_gpe() and simplify the GPE handling code.] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-07-06ACPI / Wakeup: Simplify enabling of wakeup devicesRafael J. Wysocki
To simplify the enabling of wakeup devices during system suspend and hibernation, merge acpi_enable_wakeup_device_prep() with acpi_disable_wakeup_device() and remove unnecessary (and no longer valid) comments from the latter. Rename acpi_enable_wakeup_device() to acpi_enable_wakeup_devices() and acpi_disable_wakeup_device() to acpi_disable_wakeup_devices(), because these functions usually operate on multiple device objects. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-17ACPI / PM: Do not enable GPEs for system wakeup in advanceRafael J. Wysocki
After commit 9630bdd9b15d2f489c646d8bc04b60e53eb5ec78 (ACPI: Use GPE reference counting to support shared GPEs) the wakeup enable mask bits of GPEs are set as soon as the GPEs are enabled to wake up the system. Unfortunately, this leads to a regression reported by Michal Hocko, where a system is woken up from ACPI S5 by a device that is not supposed to do that, because the wakeup enable mask bit of this device's GPE is always set when acpi_enter_sleep_state() calls acpi_hw_enable_all_wakeup_gpes(), although it should only be set if the device is supposed to wake up the system from the target state. To work around this issue, rework the ACPI power management code so that GPEs are not enabled to wake up the system upfront, but only during a system state transition when the target state of the system is known. [Of course, this means that the reference counting of "wakeup" GPEs doesn't really make sense and it is sufficient to set/unset the wakeup mask bits for them during system sleep transitions. This will allow us to simplify the GPE handling code quite a bit, but that change is too intrusive for 2.6.35.] Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15951 Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-and-tested-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2010-02-22ACPI / PM: Add more run-time wake-up fieldsRafael J. Wysocki
Use the run_wake flag to mark all devices for which run-time wake-up events may be generated by the platform. Introduce a new wake-up flag, always_enabled, for marking devices that should be permanently enabled to generate run-time events. Also, introduce a reference counter for run-wake devices and a function that will initialize all of the run-time wake-up fields for given device. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22ACPI: Use GPE reference counting to support shared GPEsRafael J. Wysocki
ACPI GPEs may map to multiple devices. The current GPE interface only provides a mechanism for enabling and disabling GPEs, making it difficult to change the state of GPEs at runtime without extensive cooperation between devices. Add an API to allow devices to indicate whether or not they want their device's GPE to be enabled for both runtime and wakeup events. Remove the old GPE type handling entirely, which gets rid of various quirks, like the implicit disabling with GPE type setting. This requires a small amount of rework in order to ensure that non-wake GPEs are enabled by default to preserve existing behaviour. Based on patches from Matthew Garrett <mjg@redhat.com>. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09ACPI PM: Replace wakeup.prepared with reference counterRafael J. Wysocki
The wakeup.prepared flag is used for marking devices that have the wake-up power already enabled, so that the wake-up power is not enabled twice in a row for the same device. This assumes, however, that device wake-up power will only be enabled once, while the device is being prepared for a system-wide sleep transition, and the second attempt is made by acpi_enable_wakeup_device_prep(). With the upcoming PCI wake-up rework this assumption will not hold any more for PCI bridges and the root bridge whose wake-up power may be enabled as a result of wake-up enable propagation from other devices (eg. add-on devices that are not associated with any GPEs). Thus, there may be many attempts to enable wake-up power on a PCI bridge or the root bridge during a system power state transition and it's better to replace wakeup.prepared with a reference counter. Reviewed-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-07ACPI: convert acpi_device_lock spinlock to mutexShaohua Li
Convert acpi_device_lock to a mutex to avoid a potential race upon access to /proc/acpi/wakeup Delete the lock entirely in wakeup.c since it is not necessary (and can not sleep) Found-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI: call acpi_wakeup_device_init() explicitly rather than as initcallBjorn Helgaas
This patch makes acpi_init() call acpi_wakeup_device_init() directly. Previously, acpi_wakeup_device_init() was a late_initcall (sequence 7). acpi_wakeup_device_init() depends on acpi_wakeup_device_list, which is populated when ACPI devices are enumerated by acpi_init() -> acpi_scan_init(). Using late_initcall is certainly enough to make sure acpi_wakeup_device_list is populated, but it is more than necessary. We can just as easily call acpi_wakeup_device_init() directly from acpi_init(), which avoids the initcall magic. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> CC: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-17ACPI: move private declarations to internal.hBjorn Helgaas
A number of things that shouldn't be exposed outside the ACPI core were declared in include/acpi/acpi_drivers.h, where anybody can see them. This patch moves those declarations to a new "internal.h" inside drivers/acpi. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-09ACPICA: create acpica/ directoryLen Brown
also, delete sleep/ and delete ACPI_CFLAGS from Makefile Signed-off-by: Len Brown <len.brown@intel.com>